From d894be57ca92c8a8819ab544d550809e8731137b Mon Sep 17 00:00:00 2001 From: Jarod Wilson Date: Thu, 20 Oct 2016 13:55:16 -0400 Subject: ethernet: use net core MTU range checking in more drivers Somehow, I missed a healthy number of ethernet drivers in the last pass. Most of these drivers either were in need of an updated max_mtu to make jumbo frames possible to enable again. In a few cases, also setting a different min_mtu to match previous lower bounds. There are also a few drivers that had no upper bounds checking, so they're getting a brand new ETH_MAX_MTU that is identical to IP_MAX_MTU, but accessible by includes all ethernet and ethernet-like drivers all have already. acenic: - min_mtu = 0, max_mtu = 9000 amazon/ena: - min_mtu = 128, max_mtu = adapter->max_mtu amd/xgbe: - min_mtu = 0, max_mtu = 9000 sb1250: - min_mtu = 0, max_mtu = 1518 cxgb3: - min_mtu = 81, max_mtu = 65535 cxgb4: - min_mtu = 81, max_mtu = 9600 cxgb4vf: - min_mtu = 81, max_mtu = 65535 benet: - min_mtu = 256, max_mtu = 9000 ibmveth: - min_mtu = 68, max_mtu = 65535 ibmvnic: - min_mtu = adapter->min_mtu, max_mtu = adapter->max_mtu - remove now redundant ibmvnic_change_mtu jme: - min_mtu = 1280, max_mtu = 9202 mv643xx_eth: - min_mtu = 64, max_mtu = 9500 mlxsw: - min_mtu = 0, max_mtu = 65535 - Basically bypassing the core checks, and instead relying on dynamic checks in the respective switch drivers' ndo_change_mtu functions ns83820: - min_mtu = 0 - remove redundant ns83820_change_mtu, only checked for mtu > 1500 netxen: - min_mtu = 0, max_mtu = 8000 (P2), max_mtu = 9600 (P3) qlge: - min_mtu = 1500, max_mtu = 9000 - driver only supports setting mtu to 1500 or 9000, so the core check only rules out < 1500 and > 9000, qlge_change_mtu still needs to check that the value is 1500 or 9000 qualcomm/emac: - min_mtu = 46, max_mtu = 9194 xilinx_axienet: - min_mtu = 64, max_mtu = 9000 Fixes: 61e84623ace3 ("net: centralize net_device min/max MTU checking") CC: netdev@vger.kernel.org CC: Jes Sorensen CC: Netanel Belgazal CC: Tom Lendacky CC: Santosh Raspatur CC: Hariprasad S CC: Sathya Perla CC: Ajit Khaparde CC: Sriharsha Basavapatna CC: Somnath Kotur CC: Thomas Falcon CC: John Allen CC: Guo-Fu Tseng CC: Sebastian Hesselbarth CC: Jiri Pirko CC: Ido Schimmel CC: Manish Chopra CC: Sony Chacko CC: Rajesh Borundia CC: Timur Tabi CC: Anirudha Sarangi CC: John Linn Signed-off-by: Jarod Wilson Signed-off-by: David S. Miller --- drivers/net/ethernet/chelsio/cxgb4vf/cxgb4vf_main.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) (limited to 'drivers/net/ethernet/chelsio/cxgb4vf/cxgb4vf_main.c') diff --git a/drivers/net/ethernet/chelsio/cxgb4vf/cxgb4vf_main.c b/drivers/net/ethernet/chelsio/cxgb4vf/cxgb4vf_main.c index 100b2cc064a3..5d4da0e8acaa 100644 --- a/drivers/net/ethernet/chelsio/cxgb4vf/cxgb4vf_main.c +++ b/drivers/net/ethernet/chelsio/cxgb4vf/cxgb4vf_main.c @@ -1108,10 +1108,6 @@ static int cxgb4vf_change_mtu(struct net_device *dev, int new_mtu) int ret; struct port_info *pi = netdev_priv(dev); - /* accommodate SACK */ - if (new_mtu < 81) - return -EINVAL; - ret = t4vf_set_rxmode(pi->adapter, pi->viid, new_mtu, -1, -1, -1, -1, true); if (!ret) @@ -2966,6 +2962,8 @@ static int cxgb4vf_pci_probe(struct pci_dev *pdev, netdev->features |= NETIF_F_HIGHDMA; netdev->priv_flags |= IFF_UNICAST_FLT; + netdev->min_mtu = 81; + netdev->max_mtu = ETH_MAX_MTU; netdev->netdev_ops = &cxgb4vf_netdev_ops; netdev->ethtool_ops = &cxgb4vf_ethtool_ops; -- cgit v1.2.3-59-g8ed1b