From efea95d45e6ab4a30df9801f8e9bf68007ee9b43 Mon Sep 17 00:00:00 2001 From: Doron Shikmoni Date: Wed, 17 Feb 2016 09:34:25 +0200 Subject: igb: Garbled output for "ethtool -m" Garbled output for "ethtool -m ethX", in igb-driven NICs with module / plugin EEPROM (i.e. SFP information). Each output data byte appears duplicated. In igb_ethtool.c, igb_get_module_eeprom() is reading the EEPROM via i2c; the eeprom offset for each word that's read via igb_read_phy_reg_i2c() was passed in #words, whereas it needs to be a byte offset. This patches fixes the bug. Signed-off-by: Doron Shikmoni Tested-by: Aaron Brown Signed-off-by: Jeff Kirsher --- drivers/net/ethernet/intel/igb/igb_ethtool.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers/net/ethernet/intel/igb/igb_ethtool.c') diff --git a/drivers/net/ethernet/intel/igb/igb_ethtool.c b/drivers/net/ethernet/intel/igb/igb_ethtool.c index 7982243d1f9b..bb4d6cdcd0b8 100644 --- a/drivers/net/ethernet/intel/igb/igb_ethtool.c +++ b/drivers/net/ethernet/intel/igb/igb_ethtool.c @@ -2831,7 +2831,8 @@ static int igb_get_module_eeprom(struct net_device *netdev, /* Read EEPROM block, SFF-8079/SFF-8472, word at a time */ for (i = 0; i < last_word - first_word + 1; i++) { - status = igb_read_phy_reg_i2c(hw, first_word + i, &dataword[i]); + status = igb_read_phy_reg_i2c(hw, (first_word + i) * 2, + &dataword[i]); if (status) { /* Error occurred while reading module */ kfree(dataword); -- cgit v1.2.3-59-g8ed1b