From 7cd1463664c2a15721ff4ccfb61d4d970815cb3d Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Fri, 6 Dec 2013 13:01:35 -0800 Subject: net: mv643xx_eth: use phy_init_hw to reset PHY Instead of open-coding a PHY reset through the MII BMCR register, use phy_init_hw() which does that for us and will also make sure that PHY fixups are applied if required. We also remove a call to phy_reset() due to the following sequence of calls in the driver: phy_scan() -> phy_connect() -> phy_connect_direct() -> phy_attach_direct() -> phy_init_hw() and we only have a call to phy_init() after phy_scan(). Signed-off-by: Florian Fainelli Tested-by: Sebastian Hesselbarth Signed-off-by: David S. Miller --- drivers/net/ethernet/marvell/mv643xx_eth.c | 21 +-------------------- 1 file changed, 1 insertion(+), 20 deletions(-) (limited to 'drivers/net/ethernet/marvell') diff --git a/drivers/net/ethernet/marvell/mv643xx_eth.c b/drivers/net/ethernet/marvell/mv643xx_eth.c index fa905052fbf4..b3d9327f78b9 100644 --- a/drivers/net/ethernet/marvell/mv643xx_eth.c +++ b/drivers/net/ethernet/marvell/mv643xx_eth.c @@ -2066,23 +2066,6 @@ static inline void oom_timer_wrapper(unsigned long data) napi_schedule(&mp->napi); } -static void phy_reset(struct mv643xx_eth_private *mp) -{ - int data; - - data = phy_read(mp->phy, MII_BMCR); - if (data < 0) - return; - - data |= BMCR_RESET; - if (phy_write(mp->phy, MII_BMCR, data) < 0) - return; - - do { - data = phy_read(mp->phy, MII_BMCR); - } while (data >= 0 && data & BMCR_RESET); -} - static void port_start(struct mv643xx_eth_private *mp) { u32 pscr; @@ -2095,7 +2078,7 @@ static void port_start(struct mv643xx_eth_private *mp) struct ethtool_cmd cmd; mv643xx_eth_get_settings(mp->dev, &cmd); - phy_reset(mp); + phy_init_hw(mp->phy); mv643xx_eth_set_settings(mp->dev, &cmd); } @@ -2763,8 +2746,6 @@ static void phy_init(struct mv643xx_eth_private *mp, int speed, int duplex) { struct phy_device *phy = mp->phy; - phy_reset(mp); - if (speed == 0) { phy->autoneg = AUTONEG_ENABLE; phy->speed = 0; -- cgit v1.2.3-59-g8ed1b