From 51b7b1c34e195886e38ee93ff2a8a203745f897f Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Mon, 21 Nov 2011 08:58:00 +0000 Subject: KSZ8851-SNL: Add ethtool support for EEPROM via eeprom_93cx6 Add ethtool EEPROM read/write support using the eeprom_93cx6 library instead of open-coding the functions. Depends on eeprom_93cx6 driver getting EEPROM write support. Signed-off-by: Ben Dooks Signed-off-by: Simtec Linux Team [sboyd@codeaurora.org: Removed previous eeprom implementation] Signed-off-by: Stephen Boyd Signed-off-by: David S. Miller --- drivers/net/ethernet/micrel/ks8851.c | 425 ++++++++++------------------------- 1 file changed, 117 insertions(+), 308 deletions(-) (limited to 'drivers/net/ethernet/micrel/ks8851.c') diff --git a/drivers/net/ethernet/micrel/ks8851.c b/drivers/net/ethernet/micrel/ks8851.c index 208e25a9e08c..6b35e7da9a9c 100644 --- a/drivers/net/ethernet/micrel/ks8851.c +++ b/drivers/net/ethernet/micrel/ks8851.c @@ -22,6 +22,7 @@ #include #include #include +#include #include @@ -82,6 +83,7 @@ union ks8851_tx_hdr { * @rc_ccr: Cached copy of KS_CCR. * @rc_rxqcr: Cached copy of KS_RXQCR. * @eeprom_size: Companion eeprom size in Bytes, 0 if no eeprom + * @eeprom: 93CX6 EEPROM state for accessing on-board EEPROM. * * The @lock ensures that the chip is protected when certain operations are * in progress. When the read or write packet transfer is in progress, most @@ -128,6 +130,8 @@ struct ks8851_net { struct spi_message spi_msg2; struct spi_transfer spi_xfer1; struct spi_transfer spi_xfer2[2]; + + struct eeprom_93cx6 eeprom; }; static int msg_enable; @@ -1071,234 +1075,6 @@ static const struct net_device_ops ks8851_netdev_ops = { .ndo_validate_addr = eth_validate_addr, }; -/* Companion eeprom access */ - -enum { /* EEPROM programming states */ - EEPROM_CONTROL, - EEPROM_ADDRESS, - EEPROM_DATA, - EEPROM_COMPLETE -}; - -/** - * ks8851_eeprom_read - read a 16bits word in ks8851 companion EEPROM - * @dev: The network device the PHY is on. - * @addr: EEPROM address to read - * - * eeprom_size: used to define the data coding length. Can be changed - * through debug-fs. - * - * Programs a read on the EEPROM using ks8851 EEPROM SW access feature. - * Warning: The READ feature is not supported on ks8851 revision 0. - * - * Rough programming model: - * - on period start: set clock high and read value on bus - * - on period / 2: set clock low and program value on bus - * - start on period / 2 - */ -unsigned int ks8851_eeprom_read(struct net_device *dev, unsigned int addr) -{ - struct ks8851_net *ks = netdev_priv(dev); - int eepcr; - int ctrl = EEPROM_OP_READ; - int state = EEPROM_CONTROL; - int bit_count = EEPROM_OP_LEN - 1; - unsigned int data = 0; - int dummy; - unsigned int addr_len; - - addr_len = (ks->eeprom_size == 128) ? 6 : 8; - - /* start transaction: chip select high, authorize write */ - mutex_lock(&ks->lock); - eepcr = EEPCR_EESA | EEPCR_EESRWA; - ks8851_wrreg16(ks, KS_EEPCR, eepcr); - eepcr |= EEPCR_EECS; - ks8851_wrreg16(ks, KS_EEPCR, eepcr); - mutex_unlock(&ks->lock); - - while (state != EEPROM_COMPLETE) { - /* falling clock period starts... */ - /* set EED_IO pin for control and address */ - eepcr &= ~EEPCR_EEDO; - switch (state) { - case EEPROM_CONTROL: - eepcr |= ((ctrl >> bit_count) & 1) << 2; - if (bit_count-- <= 0) { - bit_count = addr_len - 1; - state = EEPROM_ADDRESS; - } - break; - case EEPROM_ADDRESS: - eepcr |= ((addr >> bit_count) & 1) << 2; - bit_count--; - break; - case EEPROM_DATA: - /* Change to receive mode */ - eepcr &= ~EEPCR_EESRWA; - break; - } - - /* lower clock */ - eepcr &= ~EEPCR_EESCK; - - mutex_lock(&ks->lock); - ks8851_wrreg16(ks, KS_EEPCR, eepcr); - mutex_unlock(&ks->lock); - - /* waitread period / 2 */ - udelay(EEPROM_SK_PERIOD / 2); - - /* rising clock period starts... */ - - /* raise clock */ - mutex_lock(&ks->lock); - eepcr |= EEPCR_EESCK; - ks8851_wrreg16(ks, KS_EEPCR, eepcr); - mutex_unlock(&ks->lock); - - /* Manage read */ - switch (state) { - case EEPROM_ADDRESS: - if (bit_count < 0) { - bit_count = EEPROM_DATA_LEN - 1; - state = EEPROM_DATA; - } - break; - case EEPROM_DATA: - mutex_lock(&ks->lock); - dummy = ks8851_rdreg16(ks, KS_EEPCR); - mutex_unlock(&ks->lock); - data |= ((dummy >> EEPCR_EESB_OFFSET) & 1) << bit_count; - if (bit_count-- <= 0) - state = EEPROM_COMPLETE; - break; - } - - /* wait period / 2 */ - udelay(EEPROM_SK_PERIOD / 2); - } - - /* close transaction */ - mutex_lock(&ks->lock); - eepcr &= ~EEPCR_EECS; - ks8851_wrreg16(ks, KS_EEPCR, eepcr); - eepcr = 0; - ks8851_wrreg16(ks, KS_EEPCR, eepcr); - mutex_unlock(&ks->lock); - - return data; -} - -/** - * ks8851_eeprom_write - write a 16bits word in ks8851 companion EEPROM - * @dev: The network device the PHY is on. - * @op: operand (can be WRITE, EWEN, EWDS) - * @addr: EEPROM address to write - * @data: data to write - * - * eeprom_size: used to define the data coding length. Can be changed - * through debug-fs. - * - * Programs a write on the EEPROM using ks8851 EEPROM SW access feature. - * - * Note that a write enable is required before writing data. - * - * Rough programming model: - * - on period start: set clock high - * - on period / 2: set clock low and program value on bus - * - start on period / 2 - */ -void ks8851_eeprom_write(struct net_device *dev, unsigned int op, - unsigned int addr, unsigned int data) -{ - struct ks8851_net *ks = netdev_priv(dev); - int eepcr; - int state = EEPROM_CONTROL; - int bit_count = EEPROM_OP_LEN - 1; - unsigned int addr_len; - - addr_len = (ks->eeprom_size == 128) ? 6 : 8; - - switch (op) { - case EEPROM_OP_EWEN: - addr = 0x30; - break; - case EEPROM_OP_EWDS: - addr = 0; - break; - } - - /* start transaction: chip select high, authorize write */ - mutex_lock(&ks->lock); - eepcr = EEPCR_EESA | EEPCR_EESRWA; - ks8851_wrreg16(ks, KS_EEPCR, eepcr); - eepcr |= EEPCR_EECS; - ks8851_wrreg16(ks, KS_EEPCR, eepcr); - mutex_unlock(&ks->lock); - - while (state != EEPROM_COMPLETE) { - /* falling clock period starts... */ - /* set EED_IO pin for control and address */ - eepcr &= ~EEPCR_EEDO; - switch (state) { - case EEPROM_CONTROL: - eepcr |= ((op >> bit_count) & 1) << 2; - if (bit_count-- <= 0) { - bit_count = addr_len - 1; - state = EEPROM_ADDRESS; - } - break; - case EEPROM_ADDRESS: - eepcr |= ((addr >> bit_count) & 1) << 2; - if (bit_count-- <= 0) { - if (op == EEPROM_OP_WRITE) { - bit_count = EEPROM_DATA_LEN - 1; - state = EEPROM_DATA; - } else { - state = EEPROM_COMPLETE; - } - } - break; - case EEPROM_DATA: - eepcr |= ((data >> bit_count) & 1) << 2; - if (bit_count-- <= 0) - state = EEPROM_COMPLETE; - break; - } - - /* lower clock */ - eepcr &= ~EEPCR_EESCK; - - mutex_lock(&ks->lock); - ks8851_wrreg16(ks, KS_EEPCR, eepcr); - mutex_unlock(&ks->lock); - - /* wait period / 2 */ - udelay(EEPROM_SK_PERIOD / 2); - - /* rising clock period starts... */ - - /* raise clock */ - eepcr |= EEPCR_EESCK; - mutex_lock(&ks->lock); - ks8851_wrreg16(ks, KS_EEPCR, eepcr); - mutex_unlock(&ks->lock); - - /* wait period / 2 */ - udelay(EEPROM_SK_PERIOD / 2); - } - - /* close transaction */ - mutex_lock(&ks->lock); - eepcr &= ~EEPCR_EECS; - ks8851_wrreg16(ks, KS_EEPCR, eepcr); - eepcr = 0; - ks8851_wrreg16(ks, KS_EEPCR, eepcr); - mutex_unlock(&ks->lock); - -} - /* ethtool support */ static void ks8851_get_drvinfo(struct net_device *dev, @@ -1345,115 +1121,141 @@ static int ks8851_nway_reset(struct net_device *dev) return mii_nway_restart(&ks->mii); } -static int ks8851_get_eeprom_len(struct net_device *dev) -{ - struct ks8851_net *ks = netdev_priv(dev); - return ks->eeprom_size; -} +/* EEPROM support */ -static int ks8851_get_eeprom(struct net_device *dev, - struct ethtool_eeprom *eeprom, u8 *bytes) +static void ks8851_eeprom_regread(struct eeprom_93cx6 *ee) { - struct ks8851_net *ks = netdev_priv(dev); - u16 *eeprom_buff; - int first_word; - int last_word; - int ret_val = 0; - u16 i; - - if (eeprom->len == 0) - return -EINVAL; + struct ks8851_net *ks = ee->data; + unsigned val; - if (eeprom->len > ks->eeprom_size) - return -EINVAL; + val = ks8851_rdreg16(ks, KS_EEPCR); - eeprom->magic = ks8851_rdreg16(ks, KS_CIDER); + ee->reg_data_out = (val & EEPCR_EESB) ? 1 : 0; + ee->reg_data_clock = (val & EEPCR_EESCK) ? 1 : 0; + ee->reg_chip_select = (val & EEPCR_EECS) ? 1 : 0; +} - first_word = eeprom->offset >> 1; - last_word = (eeprom->offset + eeprom->len - 1) >> 1; +static void ks8851_eeprom_regwrite(struct eeprom_93cx6 *ee) +{ + struct ks8851_net *ks = ee->data; + unsigned val = EEPCR_EESA; /* default - eeprom access on */ + + if (ee->drive_data) + val |= EEPCR_EESRWA; + if (ee->reg_data_in) + val |= EEPCR_EEDO; + if (ee->reg_data_clock) + val |= EEPCR_EESCK; + if (ee->reg_chip_select) + val |= EEPCR_EECS; + + ks8851_wrreg16(ks, KS_EEPCR, val); +} - eeprom_buff = kmalloc(sizeof(u16) * - (last_word - first_word + 1), GFP_KERNEL); - if (!eeprom_buff) - return -ENOMEM; +/** + * ks8851_eeprom_claim - claim device EEPROM and activate the interface + * @ks: The network device state. + * + * Check for the presence of an EEPROM, and then activate software access + * to the device. + */ +static int ks8851_eeprom_claim(struct ks8851_net *ks) +{ + if (!(ks->rc_ccr & CCR_EEPROM)) + return -ENOENT; - for (i = 0; i < last_word - first_word + 1; i++) - eeprom_buff[i] = ks8851_eeprom_read(dev, first_word + 1); + mutex_lock(&ks->lock); - /* Device's eeprom is little-endian, word addressable */ - for (i = 0; i < last_word - first_word + 1; i++) - le16_to_cpus(&eeprom_buff[i]); + /* start with clock low, cs high */ + ks8851_wrreg16(ks, KS_EEPCR, EEPCR_EESA | EEPCR_EECS); + return 0; +} - memcpy(bytes, (u8 *)eeprom_buff + (eeprom->offset & 1), eeprom->len); - kfree(eeprom_buff); +/** + * ks8851_eeprom_release - release the EEPROM interface + * @ks: The device state + * + * Release the software access to the device EEPROM + */ +static void ks8851_eeprom_release(struct ks8851_net *ks) +{ + unsigned val = ks8851_rdreg16(ks, KS_EEPCR); - return ret_val; + ks8851_wrreg16(ks, KS_EEPCR, val & ~EEPCR_EESA); + mutex_unlock(&ks->lock); } +#define KS_EEPROM_MAGIC (0x00008851) + static int ks8851_set_eeprom(struct net_device *dev, - struct ethtool_eeprom *eeprom, u8 *bytes) + struct ethtool_eeprom *ee, u8 *data) { struct ks8851_net *ks = netdev_priv(dev); - u16 *eeprom_buff; - void *ptr; - int max_len; - int first_word; - int last_word; - int ret_val = 0; - u16 i; - - if (eeprom->len == 0) - return -EOPNOTSUPP; - - if (eeprom->len > ks->eeprom_size) + int offset = ee->offset; + int len = ee->len; + u16 tmp; + + /* currently only support byte writing */ + if (len != 1) return -EINVAL; - if (eeprom->magic != ks8851_rdreg16(ks, KS_CIDER)) - return -EFAULT; + if (ee->magic != KS_EEPROM_MAGIC) + return -EINVAL; - first_word = eeprom->offset >> 1; - last_word = (eeprom->offset + eeprom->len - 1) >> 1; - max_len = (last_word - first_word + 1) * 2; - eeprom_buff = kmalloc(max_len, GFP_KERNEL); - if (!eeprom_buff) - return -ENOMEM; + if (ks8851_eeprom_claim(ks)) + return -ENOENT; + + eeprom_93cx6_wren(&ks->eeprom, true); + + /* ethtool currently only supports writing bytes, which means + * we have to read/modify/write our 16bit EEPROMs */ - ptr = (void *)eeprom_buff; + eeprom_93cx6_read(&ks->eeprom, offset/2, &tmp); - if (eeprom->offset & 1) { - /* need read/modify/write of first changed EEPROM word */ - /* only the second byte of the word is being modified */ - eeprom_buff[0] = ks8851_eeprom_read(dev, first_word); - ptr++; + if (offset & 1) { + tmp &= 0xff; + tmp |= *data << 8; + } else { + tmp &= 0xff00; + tmp |= *data; } - if ((eeprom->offset + eeprom->len) & 1) - /* need read/modify/write of last changed EEPROM word */ - /* only the first byte of the word is being modified */ - eeprom_buff[last_word - first_word] = - ks8851_eeprom_read(dev, last_word); + eeprom_93cx6_write(&ks->eeprom, offset/2, tmp); + eeprom_93cx6_wren(&ks->eeprom, false); + + ks8851_eeprom_release(ks); + + return 0; +} - /* Device's eeprom is little-endian, word addressable */ - le16_to_cpus(&eeprom_buff[0]); - le16_to_cpus(&eeprom_buff[last_word - first_word]); +static int ks8851_get_eeprom(struct net_device *dev, + struct ethtool_eeprom *ee, u8 *data) +{ + struct ks8851_net *ks = netdev_priv(dev); + int offset = ee->offset; + int len = ee->len; - memcpy(ptr, bytes, eeprom->len); + /* must be 2 byte aligned */ + if (len & 1 || offset & 1) + return -EINVAL; - for (i = 0; i < last_word - first_word + 1; i++) - eeprom_buff[i] = cpu_to_le16(eeprom_buff[i]); + if (ks8851_eeprom_claim(ks)) + return -ENOENT; - ks8851_eeprom_write(dev, EEPROM_OP_EWEN, 0, 0); + ee->magic = KS_EEPROM_MAGIC; - for (i = 0; i < last_word - first_word + 1; i++) { - ks8851_eeprom_write(dev, EEPROM_OP_WRITE, first_word + i, - eeprom_buff[i]); - mdelay(EEPROM_WRITE_TIME); - } + eeprom_93cx6_multiread(&ks->eeprom, offset/2, (__le16 *)data, len/2); + ks8851_eeprom_release(ks); - ks8851_eeprom_write(dev, EEPROM_OP_EWDS, 0, 0); + return 0; +} - kfree(eeprom_buff); - return ret_val; +static int ks8851_get_eeprom_len(struct net_device *dev) +{ + struct ks8851_net *ks = netdev_priv(dev); + + /* currently, we assume it is an 93C46 attached, so return 128 */ + return ks->rc_ccr & CCR_EEPROM ? 128 : 0; } static const struct ethtool_ops ks8851_ethtool_ops = { @@ -1646,6 +1448,13 @@ static int __devinit ks8851_probe(struct spi_device *spi) spi_message_add_tail(&ks->spi_xfer2[0], &ks->spi_msg2); spi_message_add_tail(&ks->spi_xfer2[1], &ks->spi_msg2); + /* setup EEPROM state */ + + ks->eeprom.data = ks; + ks->eeprom.width = PCI_EEPROM_WIDTH_93C46; + ks->eeprom.register_read = ks8851_eeprom_regread; + ks->eeprom.register_write = ks8851_eeprom_regwrite; + /* setup mii state */ ks->mii.dev = ndev; ks->mii.phy_id = 1, -- cgit v1.2.3-59-g8ed1b