From 9e71a15d8b5bbce25c637f7f8833cd3f45b65646 Mon Sep 17 00:00:00 2001 From: Manish Chopra Date: Mon, 28 Jan 2019 10:05:04 -0800 Subject: qed: Fix bug in tx promiscuous mode settings When running tx switched traffic between VNICs created via a bridge(to which VFs are added), adapter drops the unicast packets in tx flow due to VNIC's ucast mac being unknown to it. But VF interfaces being in promiscuous mode should have caused adapter to accept all the unknown ucast packets. Later, it was found that driver doesn't really configure tx promiscuous mode settings to accept all unknown unicast macs. This patch fixes tx promiscuous mode settings to accept all unknown/unmatched unicast macs and works out the scenario. Signed-off-by: Manish Chopra Signed-off-by: Ariel Elior Signed-off-by: David S. Miller --- drivers/net/ethernet/qlogic/qed/qed_l2.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) (limited to 'drivers/net/ethernet/qlogic') diff --git a/drivers/net/ethernet/qlogic/qed/qed_l2.c b/drivers/net/ethernet/qlogic/qed/qed_l2.c index 67c02ea93906..b8baa6fcef8e 100644 --- a/drivers/net/ethernet/qlogic/qed/qed_l2.c +++ b/drivers/net/ethernet/qlogic/qed/qed_l2.c @@ -609,6 +609,10 @@ qed_sp_update_accept_mode(struct qed_hwfn *p_hwfn, (!!(accept_filter & QED_ACCEPT_MCAST_MATCHED) && !!(accept_filter & QED_ACCEPT_MCAST_UNMATCHED))); + SET_FIELD(state, ETH_VPORT_TX_MODE_UCAST_ACCEPT_ALL, + (!!(accept_filter & QED_ACCEPT_UCAST_MATCHED) && + !!(accept_filter & QED_ACCEPT_UCAST_UNMATCHED))); + SET_FIELD(state, ETH_VPORT_TX_MODE_BCAST_ACCEPT_ALL, !!(accept_filter & QED_ACCEPT_BCAST)); @@ -2688,7 +2692,8 @@ static int qed_configure_filter_rx_mode(struct qed_dev *cdev, if (type == QED_FILTER_RX_MODE_TYPE_PROMISC) { accept_flags.rx_accept_filter |= QED_ACCEPT_UCAST_UNMATCHED | QED_ACCEPT_MCAST_UNMATCHED; - accept_flags.tx_accept_filter |= QED_ACCEPT_MCAST_UNMATCHED; + accept_flags.tx_accept_filter |= QED_ACCEPT_UCAST_UNMATCHED | + QED_ACCEPT_MCAST_UNMATCHED; } else if (type == QED_FILTER_RX_MODE_TYPE_MULTI_PROMISC) { accept_flags.rx_accept_filter |= QED_ACCEPT_MCAST_UNMATCHED; accept_flags.tx_accept_filter |= QED_ACCEPT_MCAST_UNMATCHED; -- cgit v1.2.3-59-g8ed1b From ff9296966e5e00b0d0d00477b2365a178f0f06a3 Mon Sep 17 00:00:00 2001 From: Manish Chopra Date: Mon, 28 Jan 2019 10:05:05 -0800 Subject: qed: Fix LACP pdu drops for VFs VF is always configured to drop control frames (with reserved mac addresses) but to work LACP on the VFs, it would require LACP control frames to be forwarded or transmitted successfully. This patch fixes this in such a way that trusted VFs (marked through ndo_set_vf_trust) would be allowed to pass the control frames such as LACP pdus. Signed-off-by: Manish Chopra Signed-off-by: Ariel Elior Signed-off-by: David S. Miller --- drivers/net/ethernet/qlogic/qed/qed_l2.c | 5 +++++ drivers/net/ethernet/qlogic/qed/qed_l2.h | 3 +++ drivers/net/ethernet/qlogic/qed/qed_sriov.c | 10 ++++++++-- 3 files changed, 16 insertions(+), 2 deletions(-) (limited to 'drivers/net/ethernet/qlogic') diff --git a/drivers/net/ethernet/qlogic/qed/qed_l2.c b/drivers/net/ethernet/qlogic/qed/qed_l2.c index b8baa6fcef8e..e68ca83ae915 100644 --- a/drivers/net/ethernet/qlogic/qed/qed_l2.c +++ b/drivers/net/ethernet/qlogic/qed/qed_l2.c @@ -748,6 +748,11 @@ int qed_sp_vport_update(struct qed_hwfn *p_hwfn, return rc; } + if (p_params->update_ctl_frame_check) { + p_cmn->ctl_frame_mac_check_en = p_params->mac_chk_en; + p_cmn->ctl_frame_ethtype_check_en = p_params->ethtype_chk_en; + } + /* Update mcast bins for VFs, PF doesn't use this functionality */ qed_sp_update_mcast_bin(p_hwfn, p_ramrod, p_params); diff --git a/drivers/net/ethernet/qlogic/qed/qed_l2.h b/drivers/net/ethernet/qlogic/qed/qed_l2.h index 8d80f1095d17..7127d5aaac42 100644 --- a/drivers/net/ethernet/qlogic/qed/qed_l2.h +++ b/drivers/net/ethernet/qlogic/qed/qed_l2.h @@ -219,6 +219,9 @@ struct qed_sp_vport_update_params { struct qed_rss_params *rss_params; struct qed_filter_accept_flags accept_flags; struct qed_sge_tpa_params *sge_tpa_params; + u8 update_ctl_frame_check; + u8 mac_chk_en; + u8 ethtype_chk_en; }; int qed_sp_vport_update(struct qed_hwfn *p_hwfn, diff --git a/drivers/net/ethernet/qlogic/qed/qed_sriov.c b/drivers/net/ethernet/qlogic/qed/qed_sriov.c index ca6290fa0f30..71a7af134dd8 100644 --- a/drivers/net/ethernet/qlogic/qed/qed_sriov.c +++ b/drivers/net/ethernet/qlogic/qed/qed_sriov.c @@ -1969,7 +1969,9 @@ static void qed_iov_vf_mbx_start_vport(struct qed_hwfn *p_hwfn, params.vport_id = vf->vport_id; params.max_buffers_per_cqe = start->max_buffers_per_cqe; params.mtu = vf->mtu; - params.check_mac = true; + + /* Non trusted VFs should enable control frame filtering */ + params.check_mac = !vf->p_vf_info.is_trusted_configured; rc = qed_sp_eth_vport_start(p_hwfn, ¶ms); if (rc) { @@ -5130,6 +5132,9 @@ static void qed_iov_handle_trust_change(struct qed_hwfn *hwfn) params.opaque_fid = vf->opaque_fid; params.vport_id = vf->vport_id; + params.update_ctl_frame_check = 1; + params.mac_chk_en = !vf_info->is_trusted_configured; + if (vf_info->rx_accept_mode & mask) { flags->update_rx_mode_config = 1; flags->rx_accept_filter = vf_info->rx_accept_mode; @@ -5147,7 +5152,8 @@ static void qed_iov_handle_trust_change(struct qed_hwfn *hwfn) } if (flags->update_rx_mode_config || - flags->update_tx_mode_config) + flags->update_tx_mode_config || + params.update_ctl_frame_check) qed_sp_vport_update(hwfn, ¶ms, QED_SPQ_MODE_EBLOCK, NULL); } -- cgit v1.2.3-59-g8ed1b From 327852ec64205bb651be391a069784872098a3b2 Mon Sep 17 00:00:00 2001 From: Manish Chopra Date: Mon, 28 Jan 2019 10:05:06 -0800 Subject: qed: Fix VF probe failure while FLR VFs may hit VF-PF channel timeout while probing, as in some cases it was observed that VF FLR and VF "acquire" message transaction (i.e first message from VF to PF in VF's probe flow) could occur simultaneously which could lead VF to fail sending "acquire" message to PF as VF is marked disabled from HW perspective due to FLR, which will result into channel timeout and VF probe failure. In such cases, try retrying VF "acquire" message so that in later attempts it could be successful to pass message to PF after the VF FLR is completed and can be probed successfully. Signed-off-by: Manish Chopra Signed-off-by: Ariel Elior Signed-off-by: David S. Miller --- drivers/net/ethernet/qlogic/qed/qed_vf.c | 10 ++++++++++ 1 file changed, 10 insertions(+) (limited to 'drivers/net/ethernet/qlogic') diff --git a/drivers/net/ethernet/qlogic/qed/qed_vf.c b/drivers/net/ethernet/qlogic/qed/qed_vf.c index b6cccf44bf40..5dda547772c1 100644 --- a/drivers/net/ethernet/qlogic/qed/qed_vf.c +++ b/drivers/net/ethernet/qlogic/qed/qed_vf.c @@ -261,6 +261,7 @@ static int qed_vf_pf_acquire(struct qed_hwfn *p_hwfn) struct pfvf_acquire_resp_tlv *resp = &p_iov->pf2vf_reply->acquire_resp; struct pf_vf_pfdev_info *pfdev_info = &resp->pfdev_info; struct vf_pf_resc_request *p_resc; + u8 retry_cnt = VF_ACQUIRE_THRESH; bool resources_acquired = false; struct vfpf_acquire_tlv *req; int rc = 0, attempts = 0; @@ -314,6 +315,15 @@ static int qed_vf_pf_acquire(struct qed_hwfn *p_hwfn) /* send acquire request */ rc = qed_send_msg2pf(p_hwfn, &resp->hdr.status, sizeof(*resp)); + + /* Re-try acquire in case of vf-pf hw channel timeout */ + if (retry_cnt && rc == -EBUSY) { + DP_VERBOSE(p_hwfn, QED_MSG_IOV, + "VF retrying to acquire due to VPC timeout\n"); + retry_cnt--; + continue; + } + if (rc) goto exit; -- cgit v1.2.3-59-g8ed1b From 7c81626a3c37e4ac320b8ad785694ba498f24794 Mon Sep 17 00:00:00 2001 From: Manish Chopra Date: Mon, 28 Jan 2019 10:05:07 -0800 Subject: qed: Fix system crash in ll2 xmit Cache number of fragments in the skb locally as in case of linear skb (with zero fragments), tx completion (or freeing of skb) may happen before driver tries to get number of frgaments from the skb which could lead to stale access to an already freed skb. Signed-off-by: Manish Chopra Signed-off-by: Ariel Elior Signed-off-by: David S. Miller --- drivers/net/ethernet/qlogic/qed/qed_ll2.c | 20 +++++++++++++++----- 1 file changed, 15 insertions(+), 5 deletions(-) (limited to 'drivers/net/ethernet/qlogic') diff --git a/drivers/net/ethernet/qlogic/qed/qed_ll2.c b/drivers/net/ethernet/qlogic/qed/qed_ll2.c index d9237c65a838..b5f419b71287 100644 --- a/drivers/net/ethernet/qlogic/qed/qed_ll2.c +++ b/drivers/net/ethernet/qlogic/qed/qed_ll2.c @@ -2451,19 +2451,24 @@ static int qed_ll2_start_xmit(struct qed_dev *cdev, struct sk_buff *skb, { struct qed_ll2_tx_pkt_info pkt; const skb_frag_t *frag; + u8 flags = 0, nr_frags; int rc = -EINVAL, i; dma_addr_t mapping; u16 vlan = 0; - u8 flags = 0; if (unlikely(skb->ip_summed != CHECKSUM_NONE)) { DP_INFO(cdev, "Cannot transmit a checksummed packet\n"); return -EINVAL; } - if (1 + skb_shinfo(skb)->nr_frags > CORE_LL2_TX_MAX_BDS_PER_PACKET) { + /* Cache number of fragments from SKB since SKB may be freed by + * the completion routine after calling qed_ll2_prepare_tx_packet() + */ + nr_frags = skb_shinfo(skb)->nr_frags; + + if (1 + nr_frags > CORE_LL2_TX_MAX_BDS_PER_PACKET) { DP_ERR(cdev, "Cannot transmit a packet with %d fragments\n", - 1 + skb_shinfo(skb)->nr_frags); + 1 + nr_frags); return -EINVAL; } @@ -2485,7 +2490,7 @@ static int qed_ll2_start_xmit(struct qed_dev *cdev, struct sk_buff *skb, } memset(&pkt, 0, sizeof(pkt)); - pkt.num_of_bds = 1 + skb_shinfo(skb)->nr_frags; + pkt.num_of_bds = 1 + nr_frags; pkt.vlan = vlan; pkt.bd_flags = flags; pkt.tx_dest = QED_LL2_TX_DEST_NW; @@ -2496,12 +2501,17 @@ static int qed_ll2_start_xmit(struct qed_dev *cdev, struct sk_buff *skb, test_bit(QED_LL2_XMIT_FLAGS_FIP_DISCOVERY, &xmit_flags)) pkt.remove_stag = true; + /* qed_ll2_prepare_tx_packet() may actually send the packet if + * there are no fragments in the skb and subsequently the completion + * routine may run and free the SKB, so no dereferencing the SKB + * beyond this point unless skb has any fragments. + */ rc = qed_ll2_prepare_tx_packet(&cdev->hwfns[0], cdev->ll2->handle, &pkt, 1); if (rc) goto err; - for (i = 0; i < skb_shinfo(skb)->nr_frags; i++) { + for (i = 0; i < nr_frags; i++) { frag = &skb_shinfo(skb)->frags[i]; mapping = skb_frag_dma_map(&cdev->pdev->dev, frag, 0, -- cgit v1.2.3-59-g8ed1b From ffb057f98928aa099b08e419bbe5afc26ec9f448 Mon Sep 17 00:00:00 2001 From: Manish Chopra Date: Mon, 28 Jan 2019 10:05:08 -0800 Subject: qed: Fix stack out of bounds bug KASAN reported following bug in qed_init_qm_get_idx_from_flags due to inappropriate casting of "pq_flags". Fix the type of "pq_flags". [ 196.624707] BUG: KASAN: stack-out-of-bounds in qed_init_qm_get_idx_from_flags+0x1a4/0x1b8 [qed] [ 196.624712] Read of size 8 at addr ffff809b00bc7360 by task kworker/0:9/1712 [ 196.624714] [ 196.624720] CPU: 0 PID: 1712 Comm: kworker/0:9 Not tainted 4.18.0-60.el8.aarch64+debug #1 [ 196.624723] Hardware name: To be filled by O.E.M. Saber/Saber, BIOS 0ACKL024 09/26/2018 [ 196.624733] Workqueue: events work_for_cpu_fn [ 196.624738] Call trace: [ 196.624742] dump_backtrace+0x0/0x2f8 [ 196.624745] show_stack+0x24/0x30 [ 196.624749] dump_stack+0xe0/0x11c [ 196.624755] print_address_description+0x68/0x260 [ 196.624759] kasan_report+0x178/0x340 [ 196.624762] __asan_report_load_n_noabort+0x38/0x48 [ 196.624786] qed_init_qm_get_idx_from_flags+0x1a4/0x1b8 [qed] [ 196.624808] qed_init_qm_info+0xec0/0x2200 [qed] [ 196.624830] qed_resc_alloc+0x284/0x7e8 [qed] [ 196.624853] qed_slowpath_start+0x6cc/0x1ae8 [qed] [ 196.624864] __qede_probe.isra.10+0x1cc/0x12c0 [qede] [ 196.624874] qede_probe+0x78/0xf0 [qede] [ 196.624879] local_pci_probe+0xc4/0x180 [ 196.624882] work_for_cpu_fn+0x54/0x98 [ 196.624885] process_one_work+0x758/0x1900 [ 196.624888] worker_thread+0x4e0/0xd18 [ 196.624892] kthread+0x2c8/0x350 [ 196.624897] ret_from_fork+0x10/0x18 [ 196.624899] [ 196.624902] Allocated by task 2: [ 196.624906] kasan_kmalloc.part.1+0x40/0x108 [ 196.624909] kasan_kmalloc+0xb4/0xc8 [ 196.624913] kasan_slab_alloc+0x14/0x20 [ 196.624916] kmem_cache_alloc_node+0x1dc/0x480 [ 196.624921] copy_process.isra.1.part.2+0x1d8/0x4a98 [ 196.624924] _do_fork+0x150/0xfa0 [ 196.624926] kernel_thread+0x48/0x58 [ 196.624930] kthreadd+0x3a4/0x5a0 [ 196.624932] ret_from_fork+0x10/0x18 [ 196.624934] [ 196.624937] Freed by task 0: [ 196.624938] (stack is not available) [ 196.624940] [ 196.624943] The buggy address belongs to the object at ffff809b00bc0000 [ 196.624943] which belongs to the cache thread_stack of size 32768 [ 196.624946] The buggy address is located 29536 bytes inside of [ 196.624946] 32768-byte region [ffff809b00bc0000, ffff809b00bc8000) [ 196.624948] The buggy address belongs to the page: [ 196.624952] page:ffff7fe026c02e00 count:1 mapcount:0 mapping:ffff809b4001c000 index:0x0 compound_mapcount: 0 [ 196.624960] flags: 0xfffff8000008100(slab|head) [ 196.624967] raw: 0fffff8000008100 dead000000000100 dead000000000200 ffff809b4001c000 [ 196.624970] raw: 0000000000000000 0000000000080008 00000001ffffffff 0000000000000000 [ 196.624973] page dumped because: kasan: bad access detected [ 196.624974] [ 196.624976] Memory state around the buggy address: [ 196.624980] ffff809b00bc7200: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 196.624983] ffff809b00bc7280: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 196.624985] >ffff809b00bc7300: 00 00 00 00 00 00 00 00 f1 f1 f1 f1 04 f2 f2 f2 [ 196.624988] ^ [ 196.624990] ffff809b00bc7380: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 196.624993] ffff809b00bc7400: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 196.624995] ================================================================== Signed-off-by: Manish Chopra Signed-off-by: Ariel Elior Signed-off-by: David S. Miller --- drivers/net/ethernet/qlogic/qed/qed_dev.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'drivers/net/ethernet/qlogic') diff --git a/drivers/net/ethernet/qlogic/qed/qed_dev.c b/drivers/net/ethernet/qlogic/qed/qed_dev.c index 8f6551421945..2ecaaaa4469a 100644 --- a/drivers/net/ethernet/qlogic/qed/qed_dev.c +++ b/drivers/net/ethernet/qlogic/qed/qed_dev.c @@ -795,19 +795,19 @@ static void qed_init_qm_pq(struct qed_hwfn *p_hwfn, /* get pq index according to PQ_FLAGS */ static u16 *qed_init_qm_get_idx_from_flags(struct qed_hwfn *p_hwfn, - u32 pq_flags) + unsigned long pq_flags) { struct qed_qm_info *qm_info = &p_hwfn->qm_info; /* Can't have multiple flags set here */ - if (bitmap_weight((unsigned long *)&pq_flags, + if (bitmap_weight(&pq_flags, sizeof(pq_flags) * BITS_PER_BYTE) > 1) { - DP_ERR(p_hwfn, "requested multiple pq flags 0x%x\n", pq_flags); + DP_ERR(p_hwfn, "requested multiple pq flags 0x%lx\n", pq_flags); goto err; } if (!(qed_get_pq_flags(p_hwfn) & pq_flags)) { - DP_ERR(p_hwfn, "pq flag 0x%x is not set\n", pq_flags); + DP_ERR(p_hwfn, "pq flag 0x%lx is not set\n", pq_flags); goto err; } -- cgit v1.2.3-59-g8ed1b