From 0721914a3d2bc31b5c6bd4b0c10cecab939b315e Mon Sep 17 00:00:00 2001 From: Heiner Kallweit Date: Sat, 9 Nov 2019 22:01:36 +0100 Subject: r8169: add helper r8168d_modify_extpage Certain integrated PHY's from RTL8168d support extended pages. On page 0x0007 the number of the extended page is written to register 0x1e, then the registers on the extended page can be accessed. Add a helper for this to improve readability and simplify the code. Signed-off-by: Heiner Kallweit Signed-off-by: David S. Miller --- drivers/net/ethernet/realtek/r8169_main.c | 121 ++++++++++-------------------- 1 file changed, 39 insertions(+), 82 deletions(-) (limited to 'drivers/net/ethernet/realtek') diff --git a/drivers/net/ethernet/realtek/r8169_main.c b/drivers/net/ethernet/realtek/r8169_main.c index b3263a8870ba..8aa681dfeac6 100644 --- a/drivers/net/ethernet/realtek/r8169_main.c +++ b/drivers/net/ethernet/realtek/r8169_main.c @@ -1086,6 +1086,17 @@ static void rtl_w0w1_phy(struct rtl8169_private *tp, int reg_addr, int p, int m) rtl_writephy(tp, reg_addr, (val & ~m) | p); } +static void r8168d_modify_extpage(struct phy_device *phydev, int extpage, + int reg, u16 mask, u16 val) +{ + int oldpage = phy_select_page(phydev, 0x0007); + + __phy_write(phydev, 0x1e, extpage); + __phy_modify(phydev, reg, mask, val); + + phy_restore_page(phydev, oldpage, 0); +} + static void r8168d_phy_param(struct phy_device *phydev, u16 parm, u16 mask, u16 val) { @@ -2830,30 +2841,18 @@ static void rtl8168d_3_hw_phy_config(struct rtl8169_private *tp) { 0x04, 0xf800 }, { 0x04, 0xf000 }, { 0x1f, 0x0000 }, - - { 0x1f, 0x0007 }, - { 0x1e, 0x0023 }, - { 0x16, 0x0000 }, - { 0x1f, 0x0000 } }; rtl_writephy_batch(tp, phy_reg_init); + + r8168d_modify_extpage(tp->phydev, 0x0023, 0x16, 0xffff, 0x0000); } static void rtl8168d_4_hw_phy_config(struct rtl8169_private *tp) { - static const struct phy_reg phy_reg_init[] = { - { 0x1f, 0x0001 }, - { 0x17, 0x0cc0 }, - - { 0x1f, 0x0007 }, - { 0x1e, 0x002d }, - { 0x18, 0x0040 }, - { 0x1f, 0x0000 } - }; - - rtl_writephy_batch(tp, phy_reg_init); - rtl_patchphy(tp, 0x0d, 1 << 5); + phy_write_paged(tp->phydev, 0x0001, 0x17, 0x0cc0); + r8168d_modify_extpage(tp->phydev, 0x002d, 0x18, 0xffff, 0x0040); + phy_set_bits(tp->phydev, 0x0d, BIT(5)); } static void rtl8168e_1_hw_phy_config(struct rtl8169_private *tp) @@ -2867,17 +2866,6 @@ static void rtl8168e_1_hw_phy_config(struct rtl8169_private *tp) { 0x1f, 0x0003 }, { 0x14, 0x6420 }, { 0x1f, 0x0000 }, - - /* Update PFM & 10M TX idle timer */ - { 0x1f, 0x0007 }, - { 0x1e, 0x002f }, - { 0x15, 0x1919 }, - { 0x1f, 0x0000 }, - - { 0x1f, 0x0007 }, - { 0x1e, 0x00ac }, - { 0x18, 0x0006 }, - { 0x1f, 0x0000 } }; struct phy_device *phydev = tp->phydev; @@ -2888,31 +2876,26 @@ static void rtl8168e_1_hw_phy_config(struct rtl8169_private *tp) rtl_writephy_batch(tp, phy_reg_init); + /* Update PFM & 10M TX idle timer */ + r8168d_modify_extpage(phydev, 0x002f, 0x15, 0xffff, 0x1919); + + r8168d_modify_extpage(phydev, 0x00ac, 0x18, 0xffff, 0x0006); + /* DCO enable for 10M IDLE Power */ - rtl_writephy(tp, 0x1f, 0x0007); - rtl_writephy(tp, 0x1e, 0x0023); - rtl_w0w1_phy(tp, 0x17, 0x0006, 0x0000); - rtl_writephy(tp, 0x1f, 0x0000); + r8168d_modify_extpage(phydev, 0x0023, 0x17, 0x0000, 0x0006); /* For impedance matching */ phy_modify_paged(phydev, 0x0002, 0x08, 0x7f00, 0x8000); /* PHY auto speed down */ - rtl_writephy(tp, 0x1f, 0x0007); - rtl_writephy(tp, 0x1e, 0x002d); - rtl_w0w1_phy(tp, 0x18, 0x0050, 0x0000); - rtl_writephy(tp, 0x1f, 0x0000); - rtl_w0w1_phy(tp, 0x14, 0x8000, 0x0000); + r8168d_modify_extpage(phydev, 0x002d, 0x18, 0x0000, 0x0050); + phy_set_bits(phydev, 0x14, BIT(15)); r8168d_phy_param(phydev, 0x8b86, 0x0000, 0x0001); r8168d_phy_param(phydev, 0x8b85, 0x2000, 0x0000); - rtl_writephy(tp, 0x1f, 0x0007); - rtl_writephy(tp, 0x1e, 0x0020); - rtl_w0w1_phy(tp, 0x15, 0x0000, 0x1100); - rtl_writephy(tp, 0x1f, 0x0006); - rtl_writephy(tp, 0x00, 0x5a00); - rtl_writephy(tp, 0x1f, 0x0000); + r8168d_modify_extpage(phydev, 0x0020, 0x15, 0x1100, 0x0000); + phy_write_paged(phydev, 0x0006, 0x00, 0x5a00); phy_write_mmd(phydev, MDIO_MMD_AN, MDIO_AN_EEE_ADV, 0x0000); } @@ -2933,27 +2916,15 @@ static void rtl_rar_exgmac_set(struct rtl8169_private *tp, u8 *addr) static void rtl8168e_2_hw_phy_config(struct rtl8169_private *tp) { - static const struct phy_reg phy_reg_init[] = { - /* Enable Delay cap */ - { 0x1f, 0x0004 }, - { 0x1f, 0x0007 }, - { 0x1e, 0x00ac }, - { 0x18, 0x0006 }, - { 0x1f, 0x0002 }, - { 0x1f, 0x0000 }, - { 0x1f, 0x0000 }, - - /* Channel estimation fine tune */ - { 0x1f, 0x0003 }, - { 0x09, 0xa20f }, - { 0x1f, 0x0000 }, - { 0x1f, 0x0000 }, - }; struct phy_device *phydev = tp->phydev; rtl_apply_firmware(tp); - rtl_writephy_batch(tp, phy_reg_init); + /* Enable Delay cap */ + r8168d_modify_extpage(phydev, 0x00ac, 0x18, 0xffff, 0x0006); + + /* Channel estimation fine tune */ + phy_write_paged(phydev, 0x0003, 0x09, 0xa20f); /* Green Setting */ r8168d_phy_param(phydev, 0x8b5b, 0xffff, 0x9222); @@ -2967,13 +2938,8 @@ static void rtl8168e_2_hw_phy_config(struct rtl8169_private *tp) rtl_writephy(tp, 0x1f, 0x0000); /* PHY auto speed down */ - rtl_writephy(tp, 0x1f, 0x0004); - rtl_writephy(tp, 0x1f, 0x0007); - rtl_writephy(tp, 0x1e, 0x002d); - rtl_w0w1_phy(tp, 0x18, 0x0010, 0x0000); - rtl_writephy(tp, 0x1f, 0x0002); - rtl_writephy(tp, 0x1f, 0x0000); - rtl_w0w1_phy(tp, 0x14, 0x8000, 0x0000); + r8168d_modify_extpage(phydev, 0x002d, 0x18, 0x0000, 0x0010); + phy_set_bits(phydev, 0x14, BIT(15)); /* improve 10M EEE waveform */ r8168d_phy_param(phydev, 0x8b86, 0x0000, 0x0001); @@ -3005,11 +2971,8 @@ static void rtl8168f_hw_phy_config(struct rtl8169_private *tp) r8168d_phy_param(phydev, 0x8b80, 0x0000, 0x0006); /* PHY auto speed down */ - rtl_writephy(tp, 0x1f, 0x0007); - rtl_writephy(tp, 0x1e, 0x002d); - rtl_w0w1_phy(tp, 0x18, 0x0010, 0x0000); - rtl_writephy(tp, 0x1f, 0x0000); - rtl_w0w1_phy(tp, 0x14, 0x8000, 0x0000); + r8168d_modify_extpage(phydev, 0x002d, 0x18, 0x0000, 0x0010); + phy_set_bits(phydev, 0x14, BIT(15)); /* Improve 10M EEE waveform */ r8168d_phy_param(phydev, 0x8b86, 0x0000, 0x0001); @@ -3032,11 +2995,8 @@ static void rtl8168f_1_hw_phy_config(struct rtl8169_private *tp) r8168d_phy_param(phydev, 0x8b5e, 0xffff, 0x0000); r8168d_phy_param(phydev, 0x8b67, 0xffff, 0x0000); r8168d_phy_param(phydev, 0x8b70, 0xffff, 0x0000); - phy_write(phydev, 0x1f, 0x0007); - phy_write(phydev, 0x1e, 0x0078); - phy_write(phydev, 0x17, 0x0000); - phy_write(phydev, 0x19, 0x00fb); - phy_write(phydev, 0x1f, 0x0000); + r8168d_modify_extpage(phydev, 0x0078, 0x17, 0xffff, 0x0000); + r8168d_modify_extpage(phydev, 0x0078, 0x19, 0xffff, 0x00fb); /* Modify green table for 10M */ r8168d_phy_param(phydev, 0x8b79, 0xffff, 0xaa00); @@ -3076,11 +3036,8 @@ static void rtl8411_hw_phy_config(struct rtl8169_private *tp) r8168d_phy_param(phydev, 0x8b5e, 0xffff, 0x0000); r8168d_phy_param(phydev, 0x8b67, 0xffff, 0x0000); r8168d_phy_param(phydev, 0x8b70, 0xffff, 0x0000); - phy_write(phydev, 0x1f, 0x0007); - phy_write(phydev, 0x1e, 0x0078); - phy_write(phydev, 0x17, 0x0000); - phy_write(phydev, 0x19, 0x00aa); - phy_write(phydev, 0x1f, 0x0000); + r8168d_modify_extpage(phydev, 0x0078, 0x17, 0xffff, 0x0000); + r8168d_modify_extpage(phydev, 0x0078, 0x19, 0xffff, 0x00aa); /* Modify green table for 10M */ r8168d_phy_param(phydev, 0x8b79, 0xffff, 0xaa00); -- cgit v1.2.3-59-g8ed1b