From f55d84b07c4e7340473a25dc82b462607578402c Mon Sep 17 00:00:00 2001 From: Vincent Palatin Date: Wed, 1 Jun 2016 08:53:48 -0700 Subject: stmmac: do not sleep in atomic context for mdio_reset stmmac_mdio_reset() has been updated to use msleep rather udelay (as some PHY requires a one second delay there). It called from stmmac_resume() within the spin_lock_irqsave block atomic context triggering 'scheduling while atomic'. The stmmac_priv lock usage is not fully documented, but it seems to protect the access to the MAC registers / DMA structures rather than the MDIO bus or the PHY (which have separate locking), so we can push the spin_lock after the stmmac_mdio_reset call. Signed-off-by: Vincent Palatin Signed-off-by: David S. Miller --- drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) (limited to 'drivers/net/ethernet/stmicro/stmmac') diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c index eac45d0c75e2..a473c182c91d 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c @@ -3450,8 +3450,6 @@ int stmmac_resume(struct device *dev) if (!netif_running(ndev)) return 0; - spin_lock_irqsave(&priv->lock, flags); - /* Power Down bit, into the PM register, is cleared * automatically as soon as a magic packet or a Wake-up frame * is received. Anyway, it's better to manually clear @@ -3459,7 +3457,9 @@ int stmmac_resume(struct device *dev) * from another devices (e.g. serial console). */ if (device_may_wakeup(priv->device)) { + spin_lock_irqsave(&priv->lock, flags); priv->hw->mac->pmt(priv->hw, 0); + spin_unlock_irqrestore(&priv->lock, flags); priv->irq_wake = 0; } else { pinctrl_pm_select_default_state(priv->device); @@ -3473,6 +3473,8 @@ int stmmac_resume(struct device *dev) netif_device_attach(ndev); + spin_lock_irqsave(&priv->lock, flags); + priv->cur_rx = 0; priv->dirty_rx = 0; priv->dirty_tx = 0; -- cgit v1.2.3-59-g8ed1b