From 7df4a3a76d34fe1f550e82c6ef368c7c40f0aaa4 Mon Sep 17 00:00:00 2001 From: Jose Abreu Date: Wed, 6 Nov 2019 16:03:05 +0100 Subject: net: stmmac: Fix the TX IOC in xmit path IOC bit must be only set in the last descriptor. Move the logic up a little bit to make sure it's set in the correct descriptor. Signed-off-by: Jose Abreu Signed-off-by: David S. Miller --- drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 64 ++++++++++++----------- 1 file changed, 34 insertions(+), 30 deletions(-) (limited to 'drivers/net/ethernet/stmicro') diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c index b0a16d7c6e3d..f826365c979d 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c @@ -3024,6 +3024,19 @@ static netdev_tx_t stmmac_tso_xmit(struct sk_buff *skb, struct net_device *dev) /* Only the last descriptor gets to point to the skb. */ tx_q->tx_skbuff[tx_q->cur_tx] = skb; + /* Manage tx mitigation */ + tx_q->tx_count_frames += nfrags + 1; + if (likely(priv->tx_coal_frames > tx_q->tx_count_frames) && + !((skb_shinfo(skb)->tx_flags & SKBTX_HW_TSTAMP) && + priv->hwts_tx_en)) { + stmmac_tx_timer_arm(priv, queue); + } else { + desc = &tx_q->dma_tx[tx_q->cur_tx]; + tx_q->tx_count_frames = 0; + stmmac_set_tx_ic(priv, desc); + priv->xstats.tx_set_ic_bit++; + } + /* We've used all descriptors we need for this skb, however, * advance cur_tx so that it references a fresh descriptor. * ndo_start_xmit will fill this descriptor the next time it's @@ -3041,19 +3054,6 @@ static netdev_tx_t stmmac_tso_xmit(struct sk_buff *skb, struct net_device *dev) priv->xstats.tx_tso_frames++; priv->xstats.tx_tso_nfrags += nfrags; - /* Manage tx mitigation */ - tx_q->tx_count_frames += nfrags + 1; - if (likely(priv->tx_coal_frames > tx_q->tx_count_frames) && - !(priv->synopsys_id >= DWMAC_CORE_4_00 && - (skb_shinfo(skb)->tx_flags & SKBTX_HW_TSTAMP) && - priv->hwts_tx_en)) { - stmmac_tx_timer_arm(priv, queue); - } else { - tx_q->tx_count_frames = 0; - stmmac_set_tx_ic(priv, desc); - priv->xstats.tx_set_ic_bit++; - } - if (priv->sarc_type) stmmac_set_desc_sarc(priv, first, priv->sarc_type); @@ -3225,6 +3225,27 @@ static netdev_tx_t stmmac_xmit(struct sk_buff *skb, struct net_device *dev) /* Only the last descriptor gets to point to the skb. */ tx_q->tx_skbuff[entry] = skb; + /* According to the coalesce parameter the IC bit for the latest + * segment is reset and the timer re-started to clean the tx status. + * This approach takes care about the fragments: desc is the first + * element in case of no SG. + */ + tx_q->tx_count_frames += nfrags + 1; + if (likely(priv->tx_coal_frames > tx_q->tx_count_frames) && + !((skb_shinfo(skb)->tx_flags & SKBTX_HW_TSTAMP) && + priv->hwts_tx_en)) { + stmmac_tx_timer_arm(priv, queue); + } else { + if (likely(priv->extend_desc)) + desc = &tx_q->dma_etx[entry].basic; + else + desc = &tx_q->dma_tx[entry]; + + tx_q->tx_count_frames = 0; + stmmac_set_tx_ic(priv, desc); + priv->xstats.tx_set_ic_bit++; + } + /* We've used all descriptors we need for this skb, however, * advance cur_tx so that it references a fresh descriptor. * ndo_start_xmit will fill this descriptor the next time it's @@ -3260,23 +3281,6 @@ static netdev_tx_t stmmac_xmit(struct sk_buff *skb, struct net_device *dev) dev->stats.tx_bytes += skb->len; - /* According to the coalesce parameter the IC bit for the latest - * segment is reset and the timer re-started to clean the tx status. - * This approach takes care about the fragments: desc is the first - * element in case of no SG. - */ - tx_q->tx_count_frames += nfrags + 1; - if (likely(priv->tx_coal_frames > tx_q->tx_count_frames) && - !(priv->synopsys_id >= DWMAC_CORE_4_00 && - (skb_shinfo(skb)->tx_flags & SKBTX_HW_TSTAMP) && - priv->hwts_tx_en)) { - stmmac_tx_timer_arm(priv, queue); - } else { - tx_q->tx_count_frames = 0; - stmmac_set_tx_ic(priv, desc); - priv->xstats.tx_set_ic_bit++; - } - if (priv->sarc_type) stmmac_set_desc_sarc(priv, first, priv->sarc_type); -- cgit v1.2.3-59-g8ed1b