From 7d6da453efce17fae35707fa7e5757e7ade8b3cc Mon Sep 17 00:00:00 2001 From: Akinobu Mita Date: Sat, 14 May 2016 14:55:49 +0900 Subject: net: w5100: increase TX timeout period This increases TX timeout period from one second to 5 seconds which is the default value if the driver doesn't explicitly set net_device->watchdog_timeo. The one second timeout is too short for W5100 with SPI interface mode which doesn't support burst READ/WRITE processing in the SPI transfer. If the packet is transmitted while RX packets are being received at a very high rate, the TX transmittion work in the workqueue is delayed and the watchdog timer is expired. Signed-off-by: Akinobu Mita Cc: Mike Sinkovsky Cc: David S. Miller Signed-off-by: David S. Miller --- drivers/net/ethernet/wiznet/w5100.c | 1 - 1 file changed, 1 deletion(-) (limited to 'drivers/net/ethernet/wiznet') diff --git a/drivers/net/ethernet/wiznet/w5100.c b/drivers/net/ethernet/wiznet/w5100.c index 7c6d5081242e..21bef2ca2ac0 100644 --- a/drivers/net/ethernet/wiznet/w5100.c +++ b/drivers/net/ethernet/wiznet/w5100.c @@ -1142,7 +1142,6 @@ int w5100_probe(struct device *dev, const struct w5100_ops *ops, ndev->netdev_ops = &w5100_netdev_ops; ndev->ethtool_ops = &w5100_ethtool_ops; - ndev->watchdog_timeo = HZ; netif_napi_add(ndev, &priv->napi, w5100_napi_poll, 16); /* This chip doesn't support VLAN packets with normal MTU, -- cgit v1.2.3-59-g8ed1b