From e08f626b33eb636dbf38b21618ab32b7fd8e1ec4 Mon Sep 17 00:00:00 2001
From: Bruce Allan <bruce.w.allan@intel.com>
Date: Wed, 20 Feb 2013 03:06:34 +0000
Subject: e1000e: workaround DMA unit hang on I218

At 1000Mbps link speed, one of the MAC's internal clocks can be stopped for
up to 4us when entering K1 (a power mode of the MAC-PHY interconnect).  If
the MAC is waiting for completion indications for 2 DMA write requests into
Host memory (e.g. descriptor writeback or Rx packet writing) and the
indications occur while the clock is stopped, both indications will be
missed by the MAC causing the MAC to wait for the completion indications
and be unable to generate further DMA write requests.  This results in an
apparent hardware hang.

Work-around the issue by disabling the de-assertion of the clock request
when 1000Mbps link is acquired (K1 must be disabled while doing this).

Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/e1000e/ich8lan.c | 71 ++++++++++++++++++++++++++++-
 drivers/net/ethernet/intel/e1000e/ich8lan.h |  2 +
 drivers/net/ethernet/intel/e1000e/regs.h    |  1 +
 3 files changed, 73 insertions(+), 1 deletion(-)

(limited to 'drivers/net/ethernet')

diff --git a/drivers/net/ethernet/intel/e1000e/ich8lan.c b/drivers/net/ethernet/intel/e1000e/ich8lan.c
index dff7bff8b8e0..121a865c7fbd 100644
--- a/drivers/net/ethernet/intel/e1000e/ich8lan.c
+++ b/drivers/net/ethernet/intel/e1000e/ich8lan.c
@@ -781,6 +781,59 @@ release:
 	return ret_val;
 }
 
+/**
+ *  e1000_k1_workaround_lpt_lp - K1 workaround on Lynxpoint-LP
+ *  @hw:   pointer to the HW structure
+ *  @link: link up bool flag
+ *
+ *  When K1 is enabled for 1Gbps, the MAC can miss 2 DMA completion indications
+ *  preventing further DMA write requests.  Workaround the issue by disabling
+ *  the de-assertion of the clock request when in 1Gpbs mode.
+ **/
+static s32 e1000_k1_workaround_lpt_lp(struct e1000_hw *hw, bool link)
+{
+	u32 fextnvm6 = er32(FEXTNVM6);
+	s32 ret_val = 0;
+
+	if (link && (er32(STATUS) & E1000_STATUS_SPEED_1000)) {
+		u16 kmrn_reg;
+
+		ret_val = hw->phy.ops.acquire(hw);
+		if (ret_val)
+			return ret_val;
+
+		ret_val =
+		    e1000e_read_kmrn_reg_locked(hw, E1000_KMRNCTRLSTA_K1_CONFIG,
+						&kmrn_reg);
+		if (ret_val)
+			goto release;
+
+		ret_val =
+		    e1000e_write_kmrn_reg_locked(hw,
+						 E1000_KMRNCTRLSTA_K1_CONFIG,
+						 kmrn_reg &
+						 ~E1000_KMRNCTRLSTA_K1_ENABLE);
+		if (ret_val)
+			goto release;
+
+		usleep_range(10, 20);
+
+		ew32(FEXTNVM6, fextnvm6 | E1000_FEXTNVM6_REQ_PLL_CLK);
+
+		ret_val =
+		    e1000e_write_kmrn_reg_locked(hw,
+						 E1000_KMRNCTRLSTA_K1_CONFIG,
+						 kmrn_reg);
+release:
+		hw->phy.ops.release(hw);
+	} else {
+		/* clear FEXTNVM6 bit 8 on link down or 10/100 */
+		ew32(FEXTNVM6, fextnvm6 & ~E1000_FEXTNVM6_REQ_PLL_CLK);
+	}
+
+	return ret_val;
+}
+
 /**
  *  e1000_check_for_copper_link_ich8lan - Check for link (Copper)
  *  @hw: pointer to the HW structure
@@ -818,6 +871,14 @@ static s32 e1000_check_for_copper_link_ich8lan(struct e1000_hw *hw)
 			return ret_val;
 	}
 
+	/* Work-around I218 hang issue */
+	if ((hw->adapter->pdev->device == E1000_DEV_ID_PCH_LPTLP_I218_LM) ||
+	    (hw->adapter->pdev->device == E1000_DEV_ID_PCH_LPTLP_I218_V)) {
+		ret_val = e1000_k1_workaround_lpt_lp(hw, link);
+		if (ret_val)
+			return ret_val;
+	}
+
 	/* Clear link partner's EEE ability */
 	hw->dev_spec.ich8lan.eee_lp_ability = 0;
 
@@ -3954,8 +4015,16 @@ void e1000_suspend_workarounds_ich8lan(struct e1000_hw *hw)
 
 	phy_ctrl = er32(PHY_CTRL);
 	phy_ctrl |= E1000_PHY_CTRL_GBE_DISABLE;
+
 	if (hw->phy.type == e1000_phy_i217) {
-		u16 phy_reg;
+		u16 phy_reg, device_id = hw->adapter->pdev->device;
+
+		if ((device_id == E1000_DEV_ID_PCH_LPTLP_I218_LM) ||
+		    (device_id == E1000_DEV_ID_PCH_LPTLP_I218_V)) {
+			u32 fextnvm6 = er32(FEXTNVM6);
+
+			ew32(FEXTNVM6, fextnvm6 & ~E1000_FEXTNVM6_REQ_PLL_CLK);
+		}
 
 		ret_val = hw->phy.ops.acquire(hw);
 		if (ret_val)
diff --git a/drivers/net/ethernet/intel/e1000e/ich8lan.h b/drivers/net/ethernet/intel/e1000e/ich8lan.h
index b6d3174d7d2d..8bf4655c2e17 100644
--- a/drivers/net/ethernet/intel/e1000e/ich8lan.h
+++ b/drivers/net/ethernet/intel/e1000e/ich8lan.h
@@ -92,6 +92,8 @@
 #define E1000_FEXTNVM4_BEACON_DURATION_8USEC	0x7
 #define E1000_FEXTNVM4_BEACON_DURATION_16USEC	0x3
 
+#define E1000_FEXTNVM6_REQ_PLL_CLK	0x00000100
+
 #define PCIE_ICH8_SNOOP_ALL	PCIE_NO_SNOOP_ALL
 
 #define E1000_ICH_RAR_ENTRIES	7
diff --git a/drivers/net/ethernet/intel/e1000e/regs.h b/drivers/net/ethernet/intel/e1000e/regs.h
index 794fe1497666..a7e6a3e37257 100644
--- a/drivers/net/ethernet/intel/e1000e/regs.h
+++ b/drivers/net/ethernet/intel/e1000e/regs.h
@@ -42,6 +42,7 @@
 #define E1000_FEXTNVM	0x00028	/* Future Extended NVM - RW */
 #define E1000_FEXTNVM3	0x0003C	/* Future Extended NVM 3 - RW */
 #define E1000_FEXTNVM4	0x00024	/* Future Extended NVM 4 - RW */
+#define E1000_FEXTNVM6	0x00010	/* Future Extended NVM 6 - RW */
 #define E1000_FEXTNVM7	0x000E4	/* Future Extended NVM 7 - RW */
 #define E1000_FCT	0x00030	/* Flow Control Type - RW */
 #define E1000_VET	0x00038	/* VLAN Ether Type - RW */
-- 
cgit v1.2.3-59-g8ed1b


From e4f7dbb17e797d922d72567f37de3735722034ba Mon Sep 17 00:00:00 2001
From: Alexander Duyck <alexander.h.duyck@intel.com>
Date: Thu, 21 Feb 2013 03:08:50 +0000
Subject: igb: Drop BUILD_BUG_ON check from igb_build_rx_buffer

On s390 the igb driver was throwing a build error due to the fact that a frame
built using build_skb would be larger than 2K.  Since this is not likely to
change at any point in the future we are better off just dropping the check
since we already had a check in igb_set_rx_buffer_len that will just disable
the usage of build_skb anyway.

Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/igb/igb_main.c | 7 -------
 1 file changed, 7 deletions(-)

(limited to 'drivers/net/ethernet')

diff --git a/drivers/net/ethernet/intel/igb/igb_main.c b/drivers/net/ethernet/intel/igb/igb_main.c
index ed79a1c53b59..4d53a17959fa 100644
--- a/drivers/net/ethernet/intel/igb/igb_main.c
+++ b/drivers/net/ethernet/intel/igb/igb_main.c
@@ -6227,13 +6227,6 @@ static struct sk_buff *igb_build_rx_buffer(struct igb_ring *rx_ring,
 	/* If we spanned a buffer we have a huge mess so test for it */
 	BUG_ON(unlikely(!igb_test_staterr(rx_desc, E1000_RXD_STAT_EOP)));
 
-	/* Guarantee this function can be used by verifying buffer sizes */
-	BUILD_BUG_ON(SKB_WITH_OVERHEAD(IGB_RX_BUFSZ) < (NET_SKB_PAD +
-							NET_IP_ALIGN +
-							IGB_TS_HDR_LEN +
-							ETH_FRAME_LEN +
-							ETH_FCS_LEN));
-
 	rx_buffer = &rx_ring->rx_buffer_info[rx_ring->next_to_clean];
 	page = rx_buffer->page;
 	prefetchw(page);
-- 
cgit v1.2.3-59-g8ed1b


From ed65bdd8c0086d69948e6380dba0cc279a6906de Mon Sep 17 00:00:00 2001
From: Carolyn Wyborny <carolyn.wyborny@intel.com>
Date: Wed, 6 Feb 2013 03:35:27 +0000
Subject: igb: Fix link setup for I210 devices

This patch changes the setup copper link function to use a switch
statement for the PHY id's available for the given PHY types.  It
also adds a case for the I210 PHY id, so the appropriate setup link
function is called for it.

Signed-off-by: Carolyn Wyborny <carolyn.wyborny@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/igb/e1000_82575.c | 11 ++++++++---
 1 file changed, 8 insertions(+), 3 deletions(-)

(limited to 'drivers/net/ethernet')

diff --git a/drivers/net/ethernet/intel/igb/e1000_82575.c b/drivers/net/ethernet/intel/igb/e1000_82575.c
index 84e7e0909def..b64542acfa34 100644
--- a/drivers/net/ethernet/intel/igb/e1000_82575.c
+++ b/drivers/net/ethernet/intel/igb/e1000_82575.c
@@ -1361,11 +1361,16 @@ static s32 igb_setup_copper_link_82575(struct e1000_hw *hw)
 	switch (hw->phy.type) {
 	case e1000_phy_i210:
 	case e1000_phy_m88:
-		if (hw->phy.id == I347AT4_E_PHY_ID ||
-		    hw->phy.id == M88E1112_E_PHY_ID)
+		switch (hw->phy.id) {
+		case I347AT4_E_PHY_ID:
+		case M88E1112_E_PHY_ID:
+		case I210_I_PHY_ID:
 			ret_val = igb_copper_link_setup_m88_gen2(hw);
-		else
+			break;
+		default:
 			ret_val = igb_copper_link_setup_m88(hw);
+			break;
+		}
 		break;
 	case e1000_phy_igp_3:
 		ret_val = igb_copper_link_setup_igp(hw);
-- 
cgit v1.2.3-59-g8ed1b


From 603e86fa39cd48edba5ee8a4d19637bd41e2a8bf Mon Sep 17 00:00:00 2001
From: Carolyn Wyborny <carolyn.wyborny@intel.com>
Date: Wed, 20 Feb 2013 07:40:55 +0000
Subject: igb: Fix for lockdep issue in igb_get_i2c_client

This patch fixes a lockdep warning in igb_get_i2c_client by
refactoring the initialization and usage of the i2c_client
completely.  There is no on the fly allocation of the single
client needed today.

Signed-off-by: Carolyn Wyborny <carolyn.wyborny@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/igb/igb.h       |  2 +-
 drivers/net/ethernet/intel/igb/igb_hwmon.c | 14 ++++++
 drivers/net/ethernet/intel/igb/igb_main.c  | 69 +-----------------------------
 3 files changed, 17 insertions(+), 68 deletions(-)

(limited to 'drivers/net/ethernet')

diff --git a/drivers/net/ethernet/intel/igb/igb.h b/drivers/net/ethernet/intel/igb/igb.h
index d27edbc63923..25151401c2ab 100644
--- a/drivers/net/ethernet/intel/igb/igb.h
+++ b/drivers/net/ethernet/intel/igb/igb.h
@@ -447,7 +447,7 @@ struct igb_adapter {
 #endif
 	struct i2c_algo_bit_data i2c_algo;
 	struct i2c_adapter i2c_adap;
-	struct igb_i2c_client_list *i2c_clients;
+	struct i2c_client *i2c_client;
 };
 
 #define IGB_FLAG_HAS_MSI		(1 << 0)
diff --git a/drivers/net/ethernet/intel/igb/igb_hwmon.c b/drivers/net/ethernet/intel/igb/igb_hwmon.c
index 0a9b073d0b03..4623502054d5 100644
--- a/drivers/net/ethernet/intel/igb/igb_hwmon.c
+++ b/drivers/net/ethernet/intel/igb/igb_hwmon.c
@@ -39,6 +39,10 @@
 #include <linux/pci.h>
 
 #ifdef CONFIG_IGB_HWMON
+struct i2c_board_info i350_sensor_info = {
+	I2C_BOARD_INFO("i350bb", (0Xf8 >> 1)),
+};
+
 /* hwmon callback functions */
 static ssize_t igb_hwmon_show_location(struct device *dev,
 					 struct device_attribute *attr,
@@ -188,6 +192,7 @@ int igb_sysfs_init(struct igb_adapter *adapter)
 	unsigned int i;
 	int n_attrs;
 	int rc = 0;
+	struct i2c_client *client = NULL;
 
 	/* If this method isn't defined we don't support thermals */
 	if (adapter->hw.mac.ops.init_thermal_sensor_thresh == NULL)
@@ -198,6 +203,15 @@ int igb_sysfs_init(struct igb_adapter *adapter)
 		if (rc)
 			goto exit;
 
+	/* init i2c_client */
+	client = i2c_new_device(&adapter->i2c_adap, &i350_sensor_info);
+	if (client == NULL) {
+		dev_info(&adapter->pdev->dev,
+			"Failed to create new i2c device..\n");
+		goto exit;
+	}
+	adapter->i2c_client = client;
+
 	/* Allocation space for max attributes
 	 * max num sensors * values (loc, temp, max, caution)
 	 */
diff --git a/drivers/net/ethernet/intel/igb/igb_main.c b/drivers/net/ethernet/intel/igb/igb_main.c
index 4d53a17959fa..4dbd62968c7a 100644
--- a/drivers/net/ethernet/intel/igb/igb_main.c
+++ b/drivers/net/ethernet/intel/igb/igb_main.c
@@ -1923,10 +1923,6 @@ void igb_set_fw_version(struct igb_adapter *adapter)
 	return;
 }
 
-static const struct i2c_board_info i350_sensor_info = {
-	I2C_BOARD_INFO("i350bb", 0Xf8),
-};
-
 /*  igb_init_i2c - Init I2C interface
  *  @adapter: pointer to adapter structure
  *
@@ -7717,67 +7713,6 @@ static void igb_init_dmac(struct igb_adapter *adapter, u32 pba)
 	}
 }
 
-static DEFINE_SPINLOCK(i2c_clients_lock);
-
-/*  igb_get_i2c_client - returns matching client
- *  in adapters's client list.
- *  @adapter: adapter struct
- *  @dev_addr: device address of i2c needed.
- */
-static struct i2c_client *
-igb_get_i2c_client(struct igb_adapter *adapter, u8 dev_addr)
-{
-	ulong flags;
-	struct igb_i2c_client_list *client_list;
-	struct i2c_client *client = NULL;
-	struct i2c_board_info client_info = {
-		I2C_BOARD_INFO("igb", 0x00),
-	};
-
-	spin_lock_irqsave(&i2c_clients_lock, flags);
-	client_list = adapter->i2c_clients;
-
-	/* See if we already have an i2c_client */
-	while (client_list) {
-		if (client_list->client->addr == (dev_addr >> 1)) {
-			client = client_list->client;
-			goto exit;
-		} else {
-			client_list = client_list->next;
-		}
-	}
-
-	/* no client_list found, create a new one */
-	client_list = kzalloc(sizeof(*client_list), GFP_ATOMIC);
-	if (client_list == NULL)
-		goto exit;
-
-	/* dev_addr passed to us is left-shifted by 1 bit
-	 * i2c_new_device call expects it to be flush to the right.
-	 */
-	client_info.addr = dev_addr >> 1;
-	client_info.platform_data = adapter;
-	client_list->client = i2c_new_device(&adapter->i2c_adap, &client_info);
-	if (client_list->client == NULL) {
-		dev_info(&adapter->pdev->dev,
-			"Failed to create new i2c device..\n");
-		goto err_no_client;
-	}
-
-	/* insert new client at head of list */
-	client_list->next = adapter->i2c_clients;
-	adapter->i2c_clients = client_list;
-
-	client = client_list->client;
-	goto exit;
-
-err_no_client:
-	kfree(client_list);
-exit:
-	spin_unlock_irqrestore(&i2c_clients_lock, flags);
-	return client;
-}
-
 /*  igb_read_i2c_byte - Reads 8 bit word over I2C
  *  @hw: pointer to hardware structure
  *  @byte_offset: byte offset to read
@@ -7791,7 +7726,7 @@ s32 igb_read_i2c_byte(struct e1000_hw *hw, u8 byte_offset,
 				u8 dev_addr, u8 *data)
 {
 	struct igb_adapter *adapter = container_of(hw, struct igb_adapter, hw);
-	struct i2c_client *this_client = igb_get_i2c_client(adapter, dev_addr);
+	struct i2c_client *this_client = adapter->i2c_client;
 	s32 status;
 	u16 swfw_mask = 0;
 
@@ -7828,7 +7763,7 @@ s32 igb_write_i2c_byte(struct e1000_hw *hw, u8 byte_offset,
 				 u8 dev_addr, u8 data)
 {
 	struct igb_adapter *adapter = container_of(hw, struct igb_adapter, hw);
-	struct i2c_client *this_client = igb_get_i2c_client(adapter, dev_addr);
+	struct i2c_client *this_client = adapter->i2c_client;
 	s32 status;
 	u16 swfw_mask = E1000_SWFW_PHY0_SM;
 
-- 
cgit v1.2.3-59-g8ed1b


From 66d29cbc59433ba538922a9e958495156b31b83b Mon Sep 17 00:00:00 2001
From: Gavin Shan <shangw@linux.vnet.ibm.com>
Date: Sun, 3 Mar 2013 21:48:46 +0000
Subject: benet: Wait f/w POST until timeout

While PCI card faces EEH errors, reset (usually hot reset) is
expected to recover from the EEH errors. After EEH core finishes
the reset, the driver callback (be_eeh_reset) is called and wait
the firmware to complete POST successfully. The original code would
return with error once detecting failure during POST stage. That
seems not enough.

The patch forces the driver (be_eeh_reset) to wait the firmware
completes POST until timeout, instead of returning error upon
detection POST failure immediately. Also, it would improve the
reliability of the EEH funtionality of the driver.

Signed-off-by: Gavin Shan <shangw@linux.vnet.ibm.com>
Acked-by: Sathya Perla <sathya.perla@emulex.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/emulex/benet/be_cmds.c | 27 ++++++++++-----------------
 1 file changed, 10 insertions(+), 17 deletions(-)

(limited to 'drivers/net/ethernet')

diff --git a/drivers/net/ethernet/emulex/benet/be_cmds.c b/drivers/net/ethernet/emulex/benet/be_cmds.c
index 071aea79d218..813407f66c7c 100644
--- a/drivers/net/ethernet/emulex/benet/be_cmds.c
+++ b/drivers/net/ethernet/emulex/benet/be_cmds.c
@@ -473,7 +473,7 @@ static int be_mbox_notify_wait(struct be_adapter *adapter)
 	return 0;
 }
 
-static int be_POST_stage_get(struct be_adapter *adapter, u16 *stage)
+static void be_POST_stage_get(struct be_adapter *adapter, u16 *stage)
 {
 	u32 sem;
 	u32 reg = skyhawk_chip(adapter) ? SLIPORT_SEMAPHORE_OFFSET_SH :
@@ -481,11 +481,6 @@ static int be_POST_stage_get(struct be_adapter *adapter, u16 *stage)
 
 	pci_read_config_dword(adapter->pdev, reg, &sem);
 	*stage = sem & POST_STAGE_MASK;
-
-	if ((sem >> POST_ERR_SHIFT) & POST_ERR_MASK)
-		return -1;
-	else
-		return 0;
 }
 
 int lancer_wait_ready(struct be_adapter *adapter)
@@ -579,19 +574,17 @@ int be_fw_wait_ready(struct be_adapter *adapter)
 	}
 
 	do {
-		status = be_POST_stage_get(adapter, &stage);
-		if (status) {
-			dev_err(dev, "POST error; stage=0x%x\n", stage);
-			return -1;
-		} else if (stage != POST_STAGE_ARMFW_RDY) {
-			if (msleep_interruptible(2000)) {
-				dev_err(dev, "Waiting for POST aborted\n");
-				return -EINTR;
-			}
-			timeout += 2;
-		} else {
+		be_POST_stage_get(adapter, &stage);
+		if (stage == POST_STAGE_ARMFW_RDY)
 			return 0;
+
+		dev_info(dev, "Waiting for POST, %ds elapsed\n",
+			 timeout);
+		if (msleep_interruptible(2000)) {
+			dev_err(dev, "Waiting for POST aborted\n");
+			return -EINTR;
 		}
+		timeout += 2;
 	} while (timeout < 60);
 
 	dev_err(dev, "POST timeout; stage=0x%x\n", stage);
-- 
cgit v1.2.3-59-g8ed1b


From c5b3ad4c67989c778e4753be4f91dc7193a04d21 Mon Sep 17 00:00:00 2001
From: Sathya Perla <sathya.perla@emulex.com>
Date: Tue, 5 Mar 2013 22:23:20 +0000
Subject: be2net: use CSR-BAR SEMAPHORE reg for BE2/BE3

The SLIPORT_SEMAPHORE register shadowed in the
config-space may not reflect the correct POST stage after
an EEH reset in BE2/3; it may return FW_READY state even though
FW is not ready. This causes the driver to prematurely
poll the FW mailbox and fail.

For BE2/3 use the CSR-BAR/0xac instead.

Reported-by: Gavin Shan <shangw@linux.vnet.ibm.com>
Signed-off-by: Sathya Perla <sathya.perla@emulex.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/emulex/benet/be.h      |  1 +
 drivers/net/ethernet/emulex/benet/be_cmds.c | 15 +++++++++------
 drivers/net/ethernet/emulex/benet/be_hw.h   |  4 ++--
 drivers/net/ethernet/emulex/benet/be_main.c | 10 ++++++++++
 4 files changed, 22 insertions(+), 8 deletions(-)

(limited to 'drivers/net/ethernet')

diff --git a/drivers/net/ethernet/emulex/benet/be.h b/drivers/net/ethernet/emulex/benet/be.h
index 28ceb8414185..29aff55f2eea 100644
--- a/drivers/net/ethernet/emulex/benet/be.h
+++ b/drivers/net/ethernet/emulex/benet/be.h
@@ -349,6 +349,7 @@ struct be_adapter {
 	struct pci_dev *pdev;
 	struct net_device *netdev;
 
+	u8 __iomem *csr;	/* CSR BAR used only for BE2/3 */
 	u8 __iomem *db;		/* Door Bell */
 
 	struct mutex mbox_lock; /* For serializing mbox cmds to BE card */
diff --git a/drivers/net/ethernet/emulex/benet/be_cmds.c b/drivers/net/ethernet/emulex/benet/be_cmds.c
index 813407f66c7c..3c9b4f12e3e5 100644
--- a/drivers/net/ethernet/emulex/benet/be_cmds.c
+++ b/drivers/net/ethernet/emulex/benet/be_cmds.c
@@ -473,14 +473,17 @@ static int be_mbox_notify_wait(struct be_adapter *adapter)
 	return 0;
 }
 
-static void be_POST_stage_get(struct be_adapter *adapter, u16 *stage)
+static u16 be_POST_stage_get(struct be_adapter *adapter)
 {
 	u32 sem;
-	u32 reg = skyhawk_chip(adapter) ? SLIPORT_SEMAPHORE_OFFSET_SH :
-					  SLIPORT_SEMAPHORE_OFFSET_BE;
 
-	pci_read_config_dword(adapter->pdev, reg, &sem);
-	*stage = sem & POST_STAGE_MASK;
+	if (BEx_chip(adapter))
+		sem  = ioread32(adapter->csr + SLIPORT_SEMAPHORE_OFFSET_BEx);
+	else
+		pci_read_config_dword(adapter->pdev,
+				      SLIPORT_SEMAPHORE_OFFSET_SH, &sem);
+
+	return sem & POST_STAGE_MASK;
 }
 
 int lancer_wait_ready(struct be_adapter *adapter)
@@ -574,7 +577,7 @@ int be_fw_wait_ready(struct be_adapter *adapter)
 	}
 
 	do {
-		be_POST_stage_get(adapter, &stage);
+		stage = be_POST_stage_get(adapter);
 		if (stage == POST_STAGE_ARMFW_RDY)
 			return 0;
 
diff --git a/drivers/net/ethernet/emulex/benet/be_hw.h b/drivers/net/ethernet/emulex/benet/be_hw.h
index 541d4530d5bf..62dc220695f7 100644
--- a/drivers/net/ethernet/emulex/benet/be_hw.h
+++ b/drivers/net/ethernet/emulex/benet/be_hw.h
@@ -32,8 +32,8 @@
 #define MPU_EP_CONTROL 		0
 
 /********** MPU semphore: used for SH & BE  *************/
-#define SLIPORT_SEMAPHORE_OFFSET_BE		0x7c
-#define SLIPORT_SEMAPHORE_OFFSET_SH		0x94
+#define SLIPORT_SEMAPHORE_OFFSET_BEx		0xac  /* CSR BAR offset */
+#define SLIPORT_SEMAPHORE_OFFSET_SH		0x94  /* PCI-CFG offset */
 #define POST_STAGE_MASK				0x0000FFFF
 #define POST_ERR_MASK				0x1
 #define POST_ERR_SHIFT				31
diff --git a/drivers/net/ethernet/emulex/benet/be_main.c b/drivers/net/ethernet/emulex/benet/be_main.c
index 3860888ac711..08e54f3d288b 100644
--- a/drivers/net/ethernet/emulex/benet/be_main.c
+++ b/drivers/net/ethernet/emulex/benet/be_main.c
@@ -3688,6 +3688,8 @@ static void be_netdev_init(struct net_device *netdev)
 
 static void be_unmap_pci_bars(struct be_adapter *adapter)
 {
+	if (adapter->csr)
+		pci_iounmap(adapter->pdev, adapter->csr);
 	if (adapter->db)
 		pci_iounmap(adapter->pdev, adapter->db);
 }
@@ -3721,6 +3723,12 @@ static int be_map_pci_bars(struct be_adapter *adapter)
 	adapter->if_type = (sli_intf & SLI_INTF_IF_TYPE_MASK) >>
 				SLI_INTF_IF_TYPE_SHIFT;
 
+	if (BEx_chip(adapter) && be_physfn(adapter)) {
+		adapter->csr = pci_iomap(adapter->pdev, 2, 0);
+		if (adapter->csr == NULL)
+			return -ENOMEM;
+	}
+
 	addr = pci_iomap(adapter->pdev, db_bar(adapter), 0);
 	if (addr == NULL)
 		goto pci_map_err;
@@ -4329,6 +4337,8 @@ static pci_ers_result_t be_eeh_reset(struct pci_dev *pdev)
 	pci_restore_state(pdev);
 
 	/* Check if card is ok and fw is ready */
+	dev_info(&adapter->pdev->dev,
+		 "Waiting for FW to be ready after EEH reset\n");
 	status = be_fw_wait_ready(adapter);
 	if (status)
 		return PCI_ERS_RESULT_DISCONNECT;
-- 
cgit v1.2.3-59-g8ed1b


From 4e0855dff094b0d56d6b5b271e0ce7851cc1e063 Mon Sep 17 00:00:00 2001
From: Konstantin Khlebnikov <khlebnikov@openvz.org>
Date: Tue, 5 Mar 2013 09:42:59 +0000
Subject: e1000e: fix pci-device enable-counter balance

This patch removes redundant and unbalanced pci_disable_device() from
__e1000_shutdown(). pci_clear_master() is enough, device can go into
suspended state with elevated enable_cnt.

Bug was introduced in commit 23606cf5d1192c2b17912cb2ef6e62f9b11de133
("e1000e / PCI / PM: Add basic runtime PM support (rev. 4)") in v2.6.35

Cc: Bruce Allan <bruce.w.allan@intel.com>
CC: Stable <stable@kernel.org>
Signed-off-by: Konstantin Khlebnikov <khlebnikov@openvz.org>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Borislav Petkov <bp@suse.de>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/e1000e/netdev.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/net/ethernet')

diff --git a/drivers/net/ethernet/intel/e1000e/netdev.c b/drivers/net/ethernet/intel/e1000e/netdev.c
index a177b8b65c44..1799021944eb 100644
--- a/drivers/net/ethernet/intel/e1000e/netdev.c
+++ b/drivers/net/ethernet/intel/e1000e/netdev.c
@@ -5986,7 +5986,7 @@ static int __e1000_shutdown(struct pci_dev *pdev, bool *enable_wake,
 	 */
 	e1000e_release_hw_control(adapter);
 
-	pci_disable_device(pdev);
+	pci_clear_master(pdev);
 
 	return 0;
 }
-- 
cgit v1.2.3-59-g8ed1b


From 66148babe728f3e00e13c56f6b0ecf325abd80da Mon Sep 17 00:00:00 2001
From: Konstantin Khlebnikov <khlebnikov@openvz.org>
Date: Tue, 5 Mar 2013 09:43:04 +0000
Subject: e1000e: fix runtime power management transitions

This patch removes redundant actions from driver and fixes its interaction
with actions in pci-bus runtime power management code.

It removes pci_save_state() from __e1000_shutdown() for normal adapters,
PCI bus callbacks pci_pm_*() will do all this for us. Now __e1000_shutdown()
switches to D3-state only quad-port adapters, because they needs quirk for
clearing false-positive error from downsteam pci-e port.

pci_save_state() now called after clearing bus-master bit, thus __e1000_resume()
and e1000_io_slot_reset() must set it back after restoring configuration space.

This patch set get_link_status before calling pm_runtime_put() in e1000_open()
to allow e1000_idle() get real link status and schedule first runtime suspend.

This patch also enables wakeup for device if management mode is enabled
(like for WoL) as result pci_prepare_to_sleep() would setup wakeup without
special actions like custom 'enable_wakeup' sign.

Cc: Bruce Allan <bruce.w.allan@intel.com>
Signed-off-by: Konstantin Khlebnikov <khlebnikov@openvz.org>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Borislav Petkov <bp@suse.de>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/e1000e/netdev.c | 78 +++++++-----------------------
 1 file changed, 18 insertions(+), 60 deletions(-)

(limited to 'drivers/net/ethernet')

diff --git a/drivers/net/ethernet/intel/e1000e/netdev.c b/drivers/net/ethernet/intel/e1000e/netdev.c
index 1799021944eb..2954cc7352e1 100644
--- a/drivers/net/ethernet/intel/e1000e/netdev.c
+++ b/drivers/net/ethernet/intel/e1000e/netdev.c
@@ -4303,6 +4303,7 @@ static int e1000_open(struct net_device *netdev)
 	netif_start_queue(netdev);
 
 	adapter->idle_check = true;
+	hw->mac.get_link_status = true;
 	pm_runtime_put(&pdev->dev);
 
 	/* fire a link status change interrupt to start the watchdog */
@@ -5887,8 +5888,7 @@ release:
 	return retval;
 }
 
-static int __e1000_shutdown(struct pci_dev *pdev, bool *enable_wake,
-			    bool runtime)
+static int __e1000_shutdown(struct pci_dev *pdev, bool runtime)
 {
 	struct net_device *netdev = pci_get_drvdata(pdev);
 	struct e1000_adapter *adapter = netdev_priv(netdev);
@@ -5912,10 +5912,6 @@ static int __e1000_shutdown(struct pci_dev *pdev, bool *enable_wake,
 	}
 	e1000e_reset_interrupt_capability(adapter);
 
-	retval = pci_save_state(pdev);
-	if (retval)
-		return retval;
-
 	status = er32(STATUS);
 	if (status & E1000_STATUS_LU)
 		wufc &= ~E1000_WUFC_LNKC;
@@ -5971,13 +5967,6 @@ static int __e1000_shutdown(struct pci_dev *pdev, bool *enable_wake,
 		ew32(WUFC, 0);
 	}
 
-	*enable_wake = !!wufc;
-
-	/* make sure adapter isn't asleep if manageability is enabled */
-	if ((adapter->flags & FLAG_MNG_PT_ENABLED) ||
-	    (hw->mac.ops.check_mng_mode(hw)))
-		*enable_wake = true;
-
 	if (adapter->hw.phy.type == e1000_phy_igp_3)
 		e1000e_igp3_phy_powerdown_workaround_ich8lan(&adapter->hw);
 
@@ -5988,26 +5977,6 @@ static int __e1000_shutdown(struct pci_dev *pdev, bool *enable_wake,
 
 	pci_clear_master(pdev);
 
-	return 0;
-}
-
-static void e1000_power_off(struct pci_dev *pdev, bool sleep, bool wake)
-{
-	if (sleep && wake) {
-		pci_prepare_to_sleep(pdev);
-		return;
-	}
-
-	pci_wake_from_d3(pdev, wake);
-	pci_set_power_state(pdev, PCI_D3hot);
-}
-
-static void e1000_complete_shutdown(struct pci_dev *pdev, bool sleep,
-                                    bool wake)
-{
-	struct net_device *netdev = pci_get_drvdata(pdev);
-	struct e1000_adapter *adapter = netdev_priv(netdev);
-
 	/* The pci-e switch on some quad port adapters will report a
 	 * correctable error when the MAC transitions from D0 to D3.  To
 	 * prevent this we need to mask off the correctable errors on the
@@ -6021,12 +5990,13 @@ static void e1000_complete_shutdown(struct pci_dev *pdev, bool sleep,
 		pcie_capability_write_word(us_dev, PCI_EXP_DEVCTL,
 					   (devctl & ~PCI_EXP_DEVCTL_CERE));
 
-		e1000_power_off(pdev, sleep, wake);
+		pci_save_state(pdev);
+		pci_prepare_to_sleep(pdev);
 
 		pcie_capability_write_word(us_dev, PCI_EXP_DEVCTL, devctl);
-	} else {
-		e1000_power_off(pdev, sleep, wake);
 	}
+
+	return 0;
 }
 
 #ifdef CONFIG_PCIEASPM
@@ -6084,9 +6054,7 @@ static int __e1000_resume(struct pci_dev *pdev)
 	if (aspm_disable_flag)
 		e1000e_disable_aspm(pdev, aspm_disable_flag);
 
-	pci_set_power_state(pdev, PCI_D0);
-	pci_restore_state(pdev);
-	pci_save_state(pdev);
+	pci_set_master(pdev);
 
 	e1000e_set_interrupt_capability(adapter);
 	if (netif_running(netdev)) {
@@ -6152,14 +6120,8 @@ static int __e1000_resume(struct pci_dev *pdev)
 static int e1000_suspend(struct device *dev)
 {
 	struct pci_dev *pdev = to_pci_dev(dev);
-	int retval;
-	bool wake;
-
-	retval = __e1000_shutdown(pdev, &wake, false);
-	if (!retval)
-		e1000_complete_shutdown(pdev, true, wake);
 
-	return retval;
+	return __e1000_shutdown(pdev, false);
 }
 
 static int e1000_resume(struct device *dev)
@@ -6182,13 +6144,10 @@ static int e1000_runtime_suspend(struct device *dev)
 	struct net_device *netdev = pci_get_drvdata(pdev);
 	struct e1000_adapter *adapter = netdev_priv(netdev);
 
-	if (e1000e_pm_ready(adapter)) {
-		bool wake;
-
-		__e1000_shutdown(pdev, &wake, true);
-	}
+	if (!e1000e_pm_ready(adapter))
+		return 0;
 
-	return 0;
+	return __e1000_shutdown(pdev, true);
 }
 
 static int e1000_idle(struct device *dev)
@@ -6226,12 +6185,7 @@ static int e1000_runtime_resume(struct device *dev)
 
 static void e1000_shutdown(struct pci_dev *pdev)
 {
-	bool wake = false;
-
-	__e1000_shutdown(pdev, &wake, false);
-
-	if (system_state == SYSTEM_POWER_OFF)
-		e1000_complete_shutdown(pdev, false, wake);
+	__e1000_shutdown(pdev, false);
 }
 
 #ifdef CONFIG_NET_POLL_CONTROLLER
@@ -6352,9 +6306,9 @@ static pci_ers_result_t e1000_io_slot_reset(struct pci_dev *pdev)
 			"Cannot re-enable PCI device after reset.\n");
 		result = PCI_ERS_RESULT_DISCONNECT;
 	} else {
-		pci_set_master(pdev);
 		pdev->state_saved = true;
 		pci_restore_state(pdev);
+		pci_set_master(pdev);
 
 		pci_enable_wake(pdev, PCI_D3hot, 0);
 		pci_enable_wake(pdev, PCI_D3cold, 0);
@@ -6783,7 +6737,11 @@ static int e1000_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 
 	/* initialize the wol settings based on the eeprom settings */
 	adapter->wol = adapter->eeprom_wol;
-	device_set_wakeup_enable(&adapter->pdev->dev, adapter->wol);
+
+	/* make sure adapter isn't asleep if manageability is enabled */
+	if (adapter->wol || (adapter->flags & FLAG_MNG_PT_ENABLED) ||
+	    (hw->mac.ops.check_mng_mode(hw)))
+		device_wakeup_enable(&pdev->dev);
 
 	/* save off EEPROM version number */
 	e1000_read_nvm(&adapter->hw, 5, 1, &adapter->eeprom_vers);
-- 
cgit v1.2.3-59-g8ed1b


From e60b22c5b7e59db09a7c9490b1e132c7e49ae904 Mon Sep 17 00:00:00 2001
From: Konstantin Khlebnikov <khlebnikov@openvz.org>
Date: Tue, 5 Mar 2013 09:43:09 +0000
Subject: e1000e: fix accessing to suspended device

This patch fixes some annoying messages like 'Error reading PHY register' and
'Hardware Erorr' and saves several seconds on reboot.

Cc: Bruce Allan <bruce.w.allan@intel.com>
Signed-off-by: Konstantin Khlebnikov <khlebnikov@openvz.org>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Borislav Petkov <bp@suse.de>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/e1000e/ethtool.c | 13 +++++++++++++
 drivers/net/ethernet/intel/e1000e/netdev.c  |  2 ++
 2 files changed, 15 insertions(+)

(limited to 'drivers/net/ethernet')

diff --git a/drivers/net/ethernet/intel/e1000e/ethtool.c b/drivers/net/ethernet/intel/e1000e/ethtool.c
index 2c1813737f6d..f91a8f3f9d48 100644
--- a/drivers/net/ethernet/intel/e1000e/ethtool.c
+++ b/drivers/net/ethernet/intel/e1000e/ethtool.c
@@ -36,6 +36,7 @@
 #include <linux/delay.h>
 #include <linux/vmalloc.h>
 #include <linux/mdio.h>
+#include <linux/pm_runtime.h>
 
 #include "e1000.h"
 
@@ -2229,7 +2230,19 @@ static int e1000e_get_ts_info(struct net_device *netdev,
 	return 0;
 }
 
+static int e1000e_ethtool_begin(struct net_device *netdev)
+{
+	return pm_runtime_get_sync(netdev->dev.parent);
+}
+
+static void e1000e_ethtool_complete(struct net_device *netdev)
+{
+	pm_runtime_put_sync(netdev->dev.parent);
+}
+
 static const struct ethtool_ops e1000_ethtool_ops = {
+	.begin			= e1000e_ethtool_begin,
+	.complete		= e1000e_ethtool_complete,
 	.get_settings		= e1000_get_settings,
 	.set_settings		= e1000_set_settings,
 	.get_drvinfo		= e1000_get_drvinfo,
diff --git a/drivers/net/ethernet/intel/e1000e/netdev.c b/drivers/net/ethernet/intel/e1000e/netdev.c
index 2954cc7352e1..948b86ffa4f0 100644
--- a/drivers/net/ethernet/intel/e1000e/netdev.c
+++ b/drivers/net/ethernet/intel/e1000e/netdev.c
@@ -4663,6 +4663,7 @@ static void e1000_phy_read_status(struct e1000_adapter *adapter)
 	    (adapter->hw.phy.media_type == e1000_media_type_copper)) {
 		int ret_val;
 
+		pm_runtime_get_sync(&adapter->pdev->dev);
 		ret_val = e1e_rphy(hw, MII_BMCR, &phy->bmcr);
 		ret_val |= e1e_rphy(hw, MII_BMSR, &phy->bmsr);
 		ret_val |= e1e_rphy(hw, MII_ADVERTISE, &phy->advertise);
@@ -4673,6 +4674,7 @@ static void e1000_phy_read_status(struct e1000_adapter *adapter)
 		ret_val |= e1e_rphy(hw, MII_ESTATUS, &phy->estatus);
 		if (ret_val)
 			e_warn("Error reading PHY register\n");
+		pm_runtime_put_sync(&adapter->pdev->dev);
 	} else {
 		/* Do not read PHY registers if link is not up
 		 * Set values to typical power-on defaults
-- 
cgit v1.2.3-59-g8ed1b


From 3fb817f1cd54bedd23e8913051473d574a0f1717 Mon Sep 17 00:00:00 2001
From: Jack Morgenstein <jackm@dev.mellanox.co.il>
Date: Thu, 7 Mar 2013 03:46:52 +0000
Subject: net/mlx4_core: Disable mlx4_QP_ATTACH calls from guests if the host
 uses flow steering

Guests kernels may not correctly detect if DMFS (device-enabled flow steering) is
activated by the host. If DMFS is activated, the master should return error to guests
which try to use the B0-steering flow calls (mlx4_QP_ATTACH).

Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/mellanox/mlx4/resource_tracker.c | 3 +++
 1 file changed, 3 insertions(+)

(limited to 'drivers/net/ethernet')

diff --git a/drivers/net/ethernet/mellanox/mlx4/resource_tracker.c b/drivers/net/ethernet/mellanox/mlx4/resource_tracker.c
index 083fb48dc3d7..2995687f1aee 100644
--- a/drivers/net/ethernet/mellanox/mlx4/resource_tracker.c
+++ b/drivers/net/ethernet/mellanox/mlx4/resource_tracker.c
@@ -2990,6 +2990,9 @@ int mlx4_QP_ATTACH_wrapper(struct mlx4_dev *dev, int slave,
 	u8 steer_type_mask = 2;
 	enum mlx4_steer_type type = (gid[7] & steer_type_mask) >> 1;
 
+	if (dev->caps.steering_mode != MLX4_STEERING_MODE_B0)
+		return -EINVAL;
+
 	qpn = vhcr->in_modifier & 0xffffff;
 	err = get_res(dev, slave, qpn, RES_QP, &rqp);
 	if (err)
-- 
cgit v1.2.3-59-g8ed1b


From 0081c8f3814a8344ca975c085d987ec6c90499ae Mon Sep 17 00:00:00 2001
From: Jack Morgenstein <jackm@dev.mellanox.co.il>
Date: Thu, 7 Mar 2013 03:46:53 +0000
Subject: net/mlx4_core: Turn off device-managed FS bit in dev-cap wrapper if
 DMFS is not enabled

Older kernels detect DMFS (device-managed flow steering) from the HCA
device capability directly, regardless of whether the capability was
enabled in INIT_HCA, this is fixed by commit 7b8157bed "mlx4_core: Adjustments
to Flow Steering activation logic for SR-IOV"

To protect against guests running kernels without this fix, the host driver
should turn off the DMFS capability bit in mlx4_QUERY_DEV_CAP_wrapper.

Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/mellanox/mlx4/fw.c | 8 ++++++++
 1 file changed, 8 insertions(+)

(limited to 'drivers/net/ethernet')

diff --git a/drivers/net/ethernet/mellanox/mlx4/fw.c b/drivers/net/ethernet/mellanox/mlx4/fw.c
index 50917eb3013e..f6245579962d 100644
--- a/drivers/net/ethernet/mellanox/mlx4/fw.c
+++ b/drivers/net/ethernet/mellanox/mlx4/fw.c
@@ -787,6 +787,14 @@ int mlx4_QUERY_DEV_CAP_wrapper(struct mlx4_dev *dev, int slave,
 	bmme_flags &= ~MLX4_BMME_FLAG_TYPE_2_WIN;
 	MLX4_PUT(outbox->buf, bmme_flags, QUERY_DEV_CAP_BMME_FLAGS_OFFSET);
 
+	/* turn off device-managed steering capability if not enabled */
+	if (dev->caps.steering_mode != MLX4_STEERING_MODE_DEVICE_MANAGED) {
+		MLX4_GET(field, outbox->buf,
+			 QUERY_DEV_CAP_FLOW_STEERING_RANGE_EN_OFFSET);
+		field &= 0x7f;
+		MLX4_PUT(outbox->buf, field,
+			 QUERY_DEV_CAP_FLOW_STEERING_RANGE_EN_OFFSET);
+	}
 	return 0;
 }
 
-- 
cgit v1.2.3-59-g8ed1b


From e7dbeba85600aa2c8daf99f8f53d9ad27e88b810 Mon Sep 17 00:00:00 2001
From: Jack Morgenstein <jackm@dev.mellanox.co.il>
Date: Thu, 7 Mar 2013 03:46:54 +0000
Subject: net/mlx4_core: Fix endianness bug in set_param_l

The set_param_l function assumes casting a u64 pointer to a u32 pointer
allows to access the lower 32bits, but it results in writing the upper
32 bits on big endian systems.

The fixed function reads the upper 32 bits of the 64 argument, and or's
them with the 32 bits of the 32-bit value passed to the function.

Since this is now a "read-modify-write" operation, we got many
"unintialized variable" warnings which needed to be fixed as well.

Reported-by: Alexander Schmidt <alexschm@de.ibm.com>.
Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/mellanox/mlx4/cq.c   |  2 +-
 drivers/net/ethernet/mellanox/mlx4/main.c |  2 +-
 drivers/net/ethernet/mellanox/mlx4/mlx4.h |  2 +-
 drivers/net/ethernet/mellanox/mlx4/mr.c   | 10 +++++-----
 drivers/net/ethernet/mellanox/mlx4/pd.c   |  2 +-
 drivers/net/ethernet/mellanox/mlx4/port.c |  8 ++++----
 drivers/net/ethernet/mellanox/mlx4/qp.c   |  8 ++++----
 drivers/net/ethernet/mellanox/mlx4/srq.c  |  2 +-
 8 files changed, 18 insertions(+), 18 deletions(-)

(limited to 'drivers/net/ethernet')

diff --git a/drivers/net/ethernet/mellanox/mlx4/cq.c b/drivers/net/ethernet/mellanox/mlx4/cq.c
index 7e64033d7de3..0706623cfb96 100644
--- a/drivers/net/ethernet/mellanox/mlx4/cq.c
+++ b/drivers/net/ethernet/mellanox/mlx4/cq.c
@@ -226,7 +226,7 @@ void __mlx4_cq_free_icm(struct mlx4_dev *dev, int cqn)
 
 static void mlx4_cq_free_icm(struct mlx4_dev *dev, int cqn)
 {
-	u64 in_param;
+	u64 in_param = 0;
 	int err;
 
 	if (mlx4_is_mfunc(dev)) {
diff --git a/drivers/net/ethernet/mellanox/mlx4/main.c b/drivers/net/ethernet/mellanox/mlx4/main.c
index d180bc46826a..16abde20e1fc 100644
--- a/drivers/net/ethernet/mellanox/mlx4/main.c
+++ b/drivers/net/ethernet/mellanox/mlx4/main.c
@@ -1555,7 +1555,7 @@ void __mlx4_counter_free(struct mlx4_dev *dev, u32 idx)
 
 void mlx4_counter_free(struct mlx4_dev *dev, u32 idx)
 {
-	u64 in_param;
+	u64 in_param = 0;
 
 	if (mlx4_is_mfunc(dev)) {
 		set_param_l(&in_param, idx);
diff --git a/drivers/net/ethernet/mellanox/mlx4/mlx4.h b/drivers/net/ethernet/mellanox/mlx4/mlx4.h
index cf883345af88..d738454116a0 100644
--- a/drivers/net/ethernet/mellanox/mlx4/mlx4.h
+++ b/drivers/net/ethernet/mellanox/mlx4/mlx4.h
@@ -1235,7 +1235,7 @@ int mlx4_get_qp_per_mgm(struct mlx4_dev *dev);
 
 static inline void set_param_l(u64 *arg, u32 val)
 {
-	*((u32 *)arg) = val;
+	*arg = (*arg & 0xffffffff00000000ULL) | (u64) val;
 }
 
 static inline void set_param_h(u64 *arg, u32 val)
diff --git a/drivers/net/ethernet/mellanox/mlx4/mr.c b/drivers/net/ethernet/mellanox/mlx4/mr.c
index 602ca9bf78e4..f91719a08cba 100644
--- a/drivers/net/ethernet/mellanox/mlx4/mr.c
+++ b/drivers/net/ethernet/mellanox/mlx4/mr.c
@@ -183,7 +183,7 @@ u32 __mlx4_alloc_mtt_range(struct mlx4_dev *dev, int order)
 
 static u32 mlx4_alloc_mtt_range(struct mlx4_dev *dev, int order)
 {
-	u64 in_param;
+	u64 in_param = 0;
 	u64 out_param;
 	int err;
 
@@ -240,7 +240,7 @@ void __mlx4_free_mtt_range(struct mlx4_dev *dev, u32 offset, int order)
 
 static void mlx4_free_mtt_range(struct mlx4_dev *dev, u32 offset, int order)
 {
-	u64 in_param;
+	u64 in_param = 0;
 	int err;
 
 	if (mlx4_is_mfunc(dev)) {
@@ -351,7 +351,7 @@ void __mlx4_mpt_release(struct mlx4_dev *dev, u32 index)
 
 static void mlx4_mpt_release(struct mlx4_dev *dev, u32 index)
 {
-	u64 in_param;
+	u64 in_param = 0;
 
 	if (mlx4_is_mfunc(dev)) {
 		set_param_l(&in_param, index);
@@ -374,7 +374,7 @@ int __mlx4_mpt_alloc_icm(struct mlx4_dev *dev, u32 index)
 
 static int mlx4_mpt_alloc_icm(struct mlx4_dev *dev, u32 index)
 {
-	u64 param;
+	u64 param = 0;
 
 	if (mlx4_is_mfunc(dev)) {
 		set_param_l(&param, index);
@@ -395,7 +395,7 @@ void __mlx4_mpt_free_icm(struct mlx4_dev *dev, u32 index)
 
 static void mlx4_mpt_free_icm(struct mlx4_dev *dev, u32 index)
 {
-	u64 in_param;
+	u64 in_param = 0;
 
 	if (mlx4_is_mfunc(dev)) {
 		set_param_l(&in_param, index);
diff --git a/drivers/net/ethernet/mellanox/mlx4/pd.c b/drivers/net/ethernet/mellanox/mlx4/pd.c
index 1ac88637ad9d..00f223acada7 100644
--- a/drivers/net/ethernet/mellanox/mlx4/pd.c
+++ b/drivers/net/ethernet/mellanox/mlx4/pd.c
@@ -101,7 +101,7 @@ void __mlx4_xrcd_free(struct mlx4_dev *dev, u32 xrcdn)
 
 void mlx4_xrcd_free(struct mlx4_dev *dev, u32 xrcdn)
 {
-	u64 in_param;
+	u64 in_param = 0;
 	int err;
 
 	if (mlx4_is_mfunc(dev)) {
diff --git a/drivers/net/ethernet/mellanox/mlx4/port.c b/drivers/net/ethernet/mellanox/mlx4/port.c
index 719ead15e491..10c57c86388b 100644
--- a/drivers/net/ethernet/mellanox/mlx4/port.c
+++ b/drivers/net/ethernet/mellanox/mlx4/port.c
@@ -175,7 +175,7 @@ EXPORT_SYMBOL_GPL(__mlx4_register_mac);
 
 int mlx4_register_mac(struct mlx4_dev *dev, u8 port, u64 mac)
 {
-	u64 out_param;
+	u64 out_param = 0;
 	int err;
 
 	if (mlx4_is_mfunc(dev)) {
@@ -222,7 +222,7 @@ EXPORT_SYMBOL_GPL(__mlx4_unregister_mac);
 
 void mlx4_unregister_mac(struct mlx4_dev *dev, u8 port, u64 mac)
 {
-	u64 out_param;
+	u64 out_param = 0;
 
 	if (mlx4_is_mfunc(dev)) {
 		set_param_l(&out_param, port);
@@ -361,7 +361,7 @@ out:
 
 int mlx4_register_vlan(struct mlx4_dev *dev, u8 port, u16 vlan, int *index)
 {
-	u64 out_param;
+	u64 out_param = 0;
 	int err;
 
 	if (mlx4_is_mfunc(dev)) {
@@ -406,7 +406,7 @@ out:
 
 void mlx4_unregister_vlan(struct mlx4_dev *dev, u8 port, int index)
 {
-	u64 in_param;
+	u64 in_param = 0;
 	int err;
 
 	if (mlx4_is_mfunc(dev)) {
diff --git a/drivers/net/ethernet/mellanox/mlx4/qp.c b/drivers/net/ethernet/mellanox/mlx4/qp.c
index 81e2abe07bbb..e891b058c1be 100644
--- a/drivers/net/ethernet/mellanox/mlx4/qp.c
+++ b/drivers/net/ethernet/mellanox/mlx4/qp.c
@@ -222,7 +222,7 @@ int __mlx4_qp_reserve_range(struct mlx4_dev *dev, int cnt, int align,
 
 int mlx4_qp_reserve_range(struct mlx4_dev *dev, int cnt, int align, int *base)
 {
-	u64 in_param;
+	u64 in_param = 0;
 	u64 out_param;
 	int err;
 
@@ -255,7 +255,7 @@ void __mlx4_qp_release_range(struct mlx4_dev *dev, int base_qpn, int cnt)
 
 void mlx4_qp_release_range(struct mlx4_dev *dev, int base_qpn, int cnt)
 {
-	u64 in_param;
+	u64 in_param = 0;
 	int err;
 
 	if (mlx4_is_mfunc(dev)) {
@@ -319,7 +319,7 @@ err_out:
 
 static int mlx4_qp_alloc_icm(struct mlx4_dev *dev, int qpn)
 {
-	u64 param;
+	u64 param = 0;
 
 	if (mlx4_is_mfunc(dev)) {
 		set_param_l(&param, qpn);
@@ -344,7 +344,7 @@ void __mlx4_qp_free_icm(struct mlx4_dev *dev, int qpn)
 
 static void mlx4_qp_free_icm(struct mlx4_dev *dev, int qpn)
 {
-	u64 in_param;
+	u64 in_param = 0;
 
 	if (mlx4_is_mfunc(dev)) {
 		set_param_l(&in_param, qpn);
diff --git a/drivers/net/ethernet/mellanox/mlx4/srq.c b/drivers/net/ethernet/mellanox/mlx4/srq.c
index feda6c00829f..e329fe1f11b7 100644
--- a/drivers/net/ethernet/mellanox/mlx4/srq.c
+++ b/drivers/net/ethernet/mellanox/mlx4/srq.c
@@ -149,7 +149,7 @@ void __mlx4_srq_free_icm(struct mlx4_dev *dev, int srqn)
 
 static void mlx4_srq_free_icm(struct mlx4_dev *dev, int srqn)
 {
-	u64 in_param;
+	u64 in_param = 0;
 
 	if (mlx4_is_mfunc(dev)) {
 		set_param_l(&in_param, srqn);
-- 
cgit v1.2.3-59-g8ed1b


From bfa8ab47415a87c6c93a9e54e16f2f8cc6de79af Mon Sep 17 00:00:00 2001
From: Yan Burman <yanb@mellanox.com>
Date: Thu, 7 Mar 2013 03:46:55 +0000
Subject: net/mlx4_en: Fix race when setting the device MAC address

Remove unnecessary use of workqueue for the device MAC address setting
flow, and fix a race when setting MAC address which was introduced by
commit c07cb4b0a "net/mlx4_en: Manage hash of MAC addresses per port"

The race happened when mlx4_en_replace_mac was being executed in parallel
with a successive call to ndo_set_mac_address, e.g witn an A/B/A MAC
setting configuration test, the third set fails.

With this change we also properly report an error if set MAC fails.

Signed-off-by: Yan Burman <yanb@mellanox.com>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/mellanox/mlx4/en_netdev.c | 42 +++++++++++++-------------
 drivers/net/ethernet/mellanox/mlx4/mlx4_en.h   |  1 -
 2 files changed, 21 insertions(+), 22 deletions(-)

(limited to 'drivers/net/ethernet')

diff --git a/drivers/net/ethernet/mellanox/mlx4/en_netdev.c b/drivers/net/ethernet/mellanox/mlx4/en_netdev.c
index bb4d8d99f36d..217e618fd712 100644
--- a/drivers/net/ethernet/mellanox/mlx4/en_netdev.c
+++ b/drivers/net/ethernet/mellanox/mlx4/en_netdev.c
@@ -650,28 +650,10 @@ u64 mlx4_en_mac_to_u64(u8 *addr)
 	return mac;
 }
 
-static int mlx4_en_set_mac(struct net_device *dev, void *addr)
+static int mlx4_en_do_set_mac(struct mlx4_en_priv *priv)
 {
-	struct mlx4_en_priv *priv = netdev_priv(dev);
-	struct mlx4_en_dev *mdev = priv->mdev;
-	struct sockaddr *saddr = addr;
-
-	if (!is_valid_ether_addr(saddr->sa_data))
-		return -EADDRNOTAVAIL;
-
-	memcpy(dev->dev_addr, saddr->sa_data, ETH_ALEN);
-	queue_work(mdev->workqueue, &priv->mac_task);
-	return 0;
-}
-
-static void mlx4_en_do_set_mac(struct work_struct *work)
-{
-	struct mlx4_en_priv *priv = container_of(work, struct mlx4_en_priv,
-						 mac_task);
-	struct mlx4_en_dev *mdev = priv->mdev;
 	int err = 0;
 
-	mutex_lock(&mdev->state_lock);
 	if (priv->port_up) {
 		/* Remove old MAC and insert the new one */
 		err = mlx4_en_replace_mac(priv, priv->base_qpn,
@@ -683,7 +665,26 @@ static void mlx4_en_do_set_mac(struct work_struct *work)
 	} else
 		en_dbg(HW, priv, "Port is down while registering mac, exiting...\n");
 
+	return err;
+}
+
+static int mlx4_en_set_mac(struct net_device *dev, void *addr)
+{
+	struct mlx4_en_priv *priv = netdev_priv(dev);
+	struct mlx4_en_dev *mdev = priv->mdev;
+	struct sockaddr *saddr = addr;
+	int err;
+
+	if (!is_valid_ether_addr(saddr->sa_data))
+		return -EADDRNOTAVAIL;
+
+	memcpy(dev->dev_addr, saddr->sa_data, ETH_ALEN);
+
+	mutex_lock(&mdev->state_lock);
+	err = mlx4_en_do_set_mac(priv);
 	mutex_unlock(&mdev->state_lock);
+
+	return err;
 }
 
 static void mlx4_en_clear_list(struct net_device *dev)
@@ -1348,7 +1349,7 @@ static void mlx4_en_do_get_stats(struct work_struct *work)
 		queue_delayed_work(mdev->workqueue, &priv->stats_task, STATS_DELAY);
 	}
 	if (mdev->mac_removed[MLX4_MAX_PORTS + 1 - priv->port]) {
-		queue_work(mdev->workqueue, &priv->mac_task);
+		mlx4_en_do_set_mac(priv);
 		mdev->mac_removed[MLX4_MAX_PORTS + 1 - priv->port] = 0;
 	}
 	mutex_unlock(&mdev->state_lock);
@@ -2078,7 +2079,6 @@ int mlx4_en_init_netdev(struct mlx4_en_dev *mdev, int port,
 	priv->msg_enable = MLX4_EN_MSG_LEVEL;
 	spin_lock_init(&priv->stats_lock);
 	INIT_WORK(&priv->rx_mode_task, mlx4_en_do_set_rx_mode);
-	INIT_WORK(&priv->mac_task, mlx4_en_do_set_mac);
 	INIT_WORK(&priv->watchdog_task, mlx4_en_restart);
 	INIT_WORK(&priv->linkstate_task, mlx4_en_linkstate);
 	INIT_DELAYED_WORK(&priv->stats_task, mlx4_en_do_get_stats);
diff --git a/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h b/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h
index c313d7e943a9..f710b7ce0dcb 100644
--- a/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h
+++ b/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h
@@ -509,7 +509,6 @@ struct mlx4_en_priv {
 	struct mlx4_en_cq rx_cq[MAX_RX_RINGS];
 	struct mlx4_qp drop_qp;
 	struct work_struct rx_mode_task;
-	struct work_struct mac_task;
 	struct work_struct watchdog_task;
 	struct work_struct linkstate_task;
 	struct delayed_work stats_task;
-- 
cgit v1.2.3-59-g8ed1b


From 83a5a6cef40616d19a388f560447e99c2ca04d1e Mon Sep 17 00:00:00 2001
From: Yan Burman <yanb@mellanox.com>
Date: Thu, 7 Mar 2013 03:46:56 +0000
Subject: net/mlx4_en: Cleanup MAC resources on module unload or port stop

Make sure we cleanup all MAC related resources (entries in the port MAC
table and steering rules) when stopping a port or when the driver is unloaded.

The leak was introduced by commit 07cb4b0a "net/mlx4_en: Manage hash of MAC
addresses per port".

Signed-off-by: Yan Burman <yanb@mellanox.com>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/mellanox/mlx4/en_netdev.c | 36 ++++++++++++++------------
 1 file changed, 20 insertions(+), 16 deletions(-)

(limited to 'drivers/net/ethernet')

diff --git a/drivers/net/ethernet/mellanox/mlx4/en_netdev.c b/drivers/net/ethernet/mellanox/mlx4/en_netdev.c
index 217e618fd712..7fd0936967c4 100644
--- a/drivers/net/ethernet/mellanox/mlx4/en_netdev.c
+++ b/drivers/net/ethernet/mellanox/mlx4/en_netdev.c
@@ -565,34 +565,38 @@ static void mlx4_en_put_qp(struct mlx4_en_priv *priv)
 	struct mlx4_en_dev *mdev = priv->mdev;
 	struct mlx4_dev *dev = mdev->dev;
 	int qpn = priv->base_qpn;
-	u64 mac = mlx4_en_mac_to_u64(priv->dev->dev_addr);
-
-	en_dbg(DRV, priv, "Registering MAC: %pM for deleting\n",
-	       priv->dev->dev_addr);
-	mlx4_unregister_mac(dev, priv->port, mac);
+	u64 mac;
 
-	if (dev->caps.steering_mode != MLX4_STEERING_MODE_A0) {
+	if (dev->caps.steering_mode == MLX4_STEERING_MODE_A0) {
+		mac = mlx4_en_mac_to_u64(priv->dev->dev_addr);
+		en_dbg(DRV, priv, "Registering MAC: %pM for deleting\n",
+		       priv->dev->dev_addr);
+		mlx4_unregister_mac(dev, priv->port, mac);
+	} else {
 		struct mlx4_mac_entry *entry;
 		struct hlist_node *tmp;
 		struct hlist_head *bucket;
-		unsigned int mac_hash;
+		unsigned int i;
 
-		mac_hash = priv->dev->dev_addr[MLX4_EN_MAC_HASH_IDX];
-		bucket = &priv->mac_hash[mac_hash];
-		hlist_for_each_entry_safe(entry, tmp, bucket, hlist) {
-			if (ether_addr_equal_64bits(entry->mac,
-						    priv->dev->dev_addr)) {
-				en_dbg(DRV, priv, "Releasing qp: port %d, MAC %pM, qpn %d\n",
-				       priv->port, priv->dev->dev_addr, qpn);
+		for (i = 0; i < MLX4_EN_MAC_HASH_SIZE; ++i) {
+			bucket = &priv->mac_hash[i];
+			hlist_for_each_entry_safe(entry, tmp, bucket, hlist) {
+				mac = mlx4_en_mac_to_u64(entry->mac);
+				en_dbg(DRV, priv, "Registering MAC: %pM for deleting\n",
+				       entry->mac);
 				mlx4_en_uc_steer_release(priv, entry->mac,
 							 qpn, entry->reg_id);
-				mlx4_qp_release_range(dev, qpn, 1);
 
+				mlx4_unregister_mac(dev, priv->port, mac);
 				hlist_del_rcu(&entry->hlist);
 				kfree_rcu(entry, rcu);
-				break;
 			}
 		}
+
+		en_dbg(DRV, priv, "Releasing qp: port %d, qpn %d\n",
+		       priv->port, qpn);
+		mlx4_qp_release_range(dev, qpn, 1);
+		priv->flags &= ~MLX4_EN_FLAG_FORCE_PROMISC;
 	}
 }
 
-- 
cgit v1.2.3-59-g8ed1b


From a229e488ac3f904d06c20d8d3f47831db3c7a15a Mon Sep 17 00:00:00 2001
From: Amir Vadai <amirv@mellanox.com>
Date: Thu, 7 Mar 2013 03:46:57 +0000
Subject: net/mlx4_en: Disable RFS when running in SRIOV mode

Commit 37706996 "mlx4_en: fix allocation of CPU affinity reverse-map" fixed
a bug when mlx4_dev->caps.comp_pool is larger from the device rx rings, but
introduced a regression.

When the mlx4_core is activating its "legacy mode" (e.g when running in SRIOV
mode) w.r.t to EQs/IRQs usage, comp_pool becomes zero and we're crashing on
divide by zero alloc_cpu_rmap.

Fix that by enabling RFS only when running in non-legacy mode.

Reported-by: Yan Burman <yanb@mellanox.com>
Cc: Kleber Sacilotto de Souza <klebers@linux.vnet.ibm.com>
Signed-off-by: Amir Vadai <amirv@mellanox.com>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/mellanox/mlx4/en_netdev.c | 8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)

(limited to 'drivers/net/ethernet')

diff --git a/drivers/net/ethernet/mellanox/mlx4/en_netdev.c b/drivers/net/ethernet/mellanox/mlx4/en_netdev.c
index 7fd0936967c4..995d4b6d5c1e 100644
--- a/drivers/net/ethernet/mellanox/mlx4/en_netdev.c
+++ b/drivers/net/ethernet/mellanox/mlx4/en_netdev.c
@@ -1833,9 +1833,11 @@ int mlx4_en_alloc_resources(struct mlx4_en_priv *priv)
 	}
 
 #ifdef CONFIG_RFS_ACCEL
-	priv->dev->rx_cpu_rmap = alloc_irq_cpu_rmap(priv->mdev->dev->caps.comp_pool);
-	if (!priv->dev->rx_cpu_rmap)
-		goto err;
+	if (priv->mdev->dev->caps.comp_pool) {
+		priv->dev->rx_cpu_rmap = alloc_irq_cpu_rmap(priv->mdev->dev->caps.comp_pool);
+		if (!priv->dev->rx_cpu_rmap)
+			goto err;
+	}
 #endif
 
 	return 0;
-- 
cgit v1.2.3-59-g8ed1b


From 260055bb1f1f8b5328601816c50fd7e0dfda7dff Mon Sep 17 00:00:00 2001
From: Phil Sutter <phil.sutter@viprinet.com>
Date: Wed, 6 Mar 2013 07:49:02 +0000
Subject: mv643xx_eth: fix for disabled autoneg

When autoneg has been disabled in the PHY (Marvell 88E1118 here), auto
negotiation between MAC and PHY seem non-functional anymore. The only
way I found to workaround this is to manually configure the MAC with the
settings sent to the PHY earlier.

Signed-off-by: Phil Sutter <phil.sutter@viprinet.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/marvell/mv643xx_eth.c | 55 +++++++++++++++++++++++++++---
 1 file changed, 51 insertions(+), 4 deletions(-)

(limited to 'drivers/net/ethernet')

diff --git a/drivers/net/ethernet/marvell/mv643xx_eth.c b/drivers/net/ethernet/marvell/mv643xx_eth.c
index 29140502b71a..6562c736a1d8 100644
--- a/drivers/net/ethernet/marvell/mv643xx_eth.c
+++ b/drivers/net/ethernet/marvell/mv643xx_eth.c
@@ -1081,6 +1081,45 @@ static void txq_set_fixed_prio_mode(struct tx_queue *txq)
 
 
 /* mii management interface *************************************************/
+static void mv643xx_adjust_pscr(struct mv643xx_eth_private *mp)
+{
+	u32 pscr = rdlp(mp, PORT_SERIAL_CONTROL);
+	u32 autoneg_disable = FORCE_LINK_PASS |
+	             DISABLE_AUTO_NEG_SPEED_GMII |
+		     DISABLE_AUTO_NEG_FOR_FLOW_CTRL |
+		     DISABLE_AUTO_NEG_FOR_DUPLEX;
+
+	if (mp->phy->autoneg == AUTONEG_ENABLE) {
+		/* enable auto negotiation */
+		pscr &= ~autoneg_disable;
+		goto out_write;
+	}
+
+	pscr |= autoneg_disable;
+
+	if (mp->phy->speed == SPEED_1000) {
+		/* force gigabit, half duplex not supported */
+		pscr |= SET_GMII_SPEED_TO_1000;
+		pscr |= SET_FULL_DUPLEX_MODE;
+		goto out_write;
+	}
+
+	pscr &= ~SET_GMII_SPEED_TO_1000;
+
+	if (mp->phy->speed == SPEED_100)
+		pscr |= SET_MII_SPEED_TO_100;
+	else
+		pscr &= ~SET_MII_SPEED_TO_100;
+
+	if (mp->phy->duplex == DUPLEX_FULL)
+		pscr |= SET_FULL_DUPLEX_MODE;
+	else
+		pscr &= ~SET_FULL_DUPLEX_MODE;
+
+out_write:
+	wrlp(mp, PORT_SERIAL_CONTROL, pscr);
+}
+
 static irqreturn_t mv643xx_eth_err_irq(int irq, void *dev_id)
 {
 	struct mv643xx_eth_shared_private *msp = dev_id;
@@ -1499,6 +1538,7 @@ static int
 mv643xx_eth_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
 {
 	struct mv643xx_eth_private *mp = netdev_priv(dev);
+	int ret;
 
 	if (mp->phy == NULL)
 		return -EINVAL;
@@ -1508,7 +1548,10 @@ mv643xx_eth_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
 	 */
 	cmd->advertising &= ~ADVERTISED_1000baseT_Half;
 
-	return phy_ethtool_sset(mp->phy, cmd);
+	ret = phy_ethtool_sset(mp->phy, cmd);
+	if (!ret)
+		mv643xx_adjust_pscr(mp);
+	return ret;
 }
 
 static void mv643xx_eth_get_drvinfo(struct net_device *dev,
@@ -2442,11 +2485,15 @@ static int mv643xx_eth_stop(struct net_device *dev)
 static int mv643xx_eth_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
 {
 	struct mv643xx_eth_private *mp = netdev_priv(dev);
+	int ret;
 
-	if (mp->phy != NULL)
-		return phy_mii_ioctl(mp->phy, ifr, cmd);
+	if (mp->phy == NULL)
+		return -ENOTSUPP;
 
-	return -EOPNOTSUPP;
+	ret = phy_mii_ioctl(mp->phy, ifr, cmd);
+	if (!ret)
+		mv643xx_adjust_pscr(mp);
+	return ret;
 }
 
 static int mv643xx_eth_change_mtu(struct net_device *dev, int new_mtu)
-- 
cgit v1.2.3-59-g8ed1b


From 5f3347e6e75768985a088d959c49fb66263087b6 Mon Sep 17 00:00:00 2001
From: Yaniv Rosner <yanivr@broadcom.com>
Date: Thu, 7 Mar 2013 13:27:33 +0000
Subject: bnx2x: Fix intermittent long KR2 link up time

When a KR2 device is connected to a KR link-partner, sometimes it requires
disabling KR2 for the link to come up. To get a KR2 link up later, in case no
base pages are seen, the KR2 is restored. The problem was that some link
partners cleared their advertised BP/NP after around two seconds, causing the
driver to disable/enable KR2 link all the time.
The fix was to wait at least 5 seconds before checking KR2 recovery.

Signed-off-by: Yaniv Rosner <yanivr@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c | 11 +++++++++++
 drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.h |  3 ++-
 2 files changed, 13 insertions(+), 1 deletion(-)

(limited to 'drivers/net/ethernet')

diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c
index 31c5787970db..00ac4932f4c4 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c
@@ -12527,6 +12527,7 @@ int bnx2x_phy_init(struct link_params *params, struct link_vars *vars)
 	vars->flow_ctrl = BNX2X_FLOW_CTRL_NONE;
 	vars->mac_type = MAC_TYPE_NONE;
 	vars->phy_flags = 0;
+	vars->check_kr2_recovery_cnt = 0;
 	/* Driver opens NIG-BRB filters */
 	bnx2x_set_rx_filter(params, 1);
 	/* Check if link flap can be avoided */
@@ -13411,6 +13412,7 @@ static void bnx2x_disable_kr2(struct link_params *params,
 	vars->link_attr_sync &= ~LINK_ATTR_SYNC_KR2_ENABLE;
 	bnx2x_update_link_attr(params, vars->link_attr_sync);
 
+	vars->check_kr2_recovery_cnt = CHECK_KR2_RECOVERY_CNT;
 	/* Restart AN on leading lane */
 	bnx2x_warpcore_restart_AN_KR(phy, params);
 }
@@ -13439,6 +13441,15 @@ static void bnx2x_check_kr2_wa(struct link_params *params,
 		return;
 	}
 
+	/* Once KR2 was disabled, wait 5 seconds before checking KR2 recovery
+	 * since some switches tend to reinit the AN process and clear the
+	 * advertised BP/NP after ~2 seconds causing the KR2 to be disabled
+	 * and recovered many times
+	 */
+	if (vars->check_kr2_recovery_cnt > 0) {
+		vars->check_kr2_recovery_cnt--;
+		return;
+	}
 	lane = bnx2x_get_warpcore_lane(phy, params);
 	CL22_WR_OVER_CL45(bp, phy, MDIO_REG_BANK_AER_BLOCK,
 			  MDIO_AER_BLOCK_AER_REG, lane);
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.h
index be5c195d03dd..f92fcf71be04 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.h
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.h
@@ -342,7 +342,8 @@ struct link_vars {
 	u32 link_status;
 	u32 eee_status;
 	u8 fault_detected;
-	u8 rsrv1;
+	u8 check_kr2_recovery_cnt;
+#define CHECK_KR2_RECOVERY_CNT	5
 	u16 periodic_flags;
 #define PERIODIC_FLAGS_LINK_EVENT	0x0001
 
-- 
cgit v1.2.3-59-g8ed1b


From d9169323308a63fdd967920b9c63a00394ae7c85 Mon Sep 17 00:00:00 2001
From: Yaniv Rosner <yanivr@broadcom.com>
Date: Thu, 7 Mar 2013 13:27:34 +0000
Subject: bnx2x: Fix SFP+ misconfiguration in iSCSI boot scenario

Fix a problem in which iSCSI-boot installation fails when switching SFP+ boot
port and moving the SFP+ module prior to boot. The SFP+ insertion triggers an
interrupt which configures the SFP+ module wrongly before interface is loaded.

Signed-off-by: Yaniv Rosner <yanivr@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c | 6 +++++-
 drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.h | 1 +
 2 files changed, 6 insertions(+), 1 deletion(-)

(limited to 'drivers/net/ethernet')

diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c
index 00ac4932f4c4..77ebae0ac64a 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c
@@ -8647,7 +8647,9 @@ void bnx2x_handle_module_detect_int(struct link_params *params)
 						MDIO_WC_DEVAD,
 						MDIO_WC_REG_DIGITAL5_MISC6,
 						&rx_tx_in_reset);
-				if (!rx_tx_in_reset) {
+				if ((!rx_tx_in_reset) &&
+				    (params->link_flags &
+				     PHY_INITIALIZED)) {
 					bnx2x_warpcore_reset_lane(bp, phy, 1);
 					bnx2x_warpcore_config_sfi(phy, params);
 					bnx2x_warpcore_reset_lane(bp, phy, 0);
@@ -12528,6 +12530,7 @@ int bnx2x_phy_init(struct link_params *params, struct link_vars *vars)
 	vars->mac_type = MAC_TYPE_NONE;
 	vars->phy_flags = 0;
 	vars->check_kr2_recovery_cnt = 0;
+	params->link_flags = PHY_INITIALIZED;
 	/* Driver opens NIG-BRB filters */
 	bnx2x_set_rx_filter(params, 1);
 	/* Check if link flap can be avoided */
@@ -12692,6 +12695,7 @@ int bnx2x_lfa_reset(struct link_params *params,
 	struct bnx2x *bp = params->bp;
 	vars->link_up = 0;
 	vars->phy_flags = 0;
+	params->link_flags &= ~PHY_INITIALIZED;
 	if (!params->lfa_base)
 		return bnx2x_link_reset(params, vars, 1);
 	/*
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.h
index f92fcf71be04..56c2aae4e2c8 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.h
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.h
@@ -309,6 +309,7 @@ struct link_params {
 				req_flow_ctrl is set to AUTO */
 	u16 link_flags;
 #define LINK_FLAGS_INT_DISABLED		(1<<0)
+#define PHY_INITIALIZED		(1<<1)
 	u32 lfa_base;
 };
 
-- 
cgit v1.2.3-59-g8ed1b


From 84421b99cedc3443e76d2a594f3c815d5cb9a8e1 Mon Sep 17 00:00:00 2001
From: Nithin Sujir <nsujir@broadcom.com>
Date: Fri, 8 Mar 2013 08:01:24 +0000
Subject: tg3: Update link_up flag for phylib devices

Commit f4a46d1f46a8fece34edd2023e054072b02e110d introduced a bug where
the ifconfig stats would remain 0 for phylib devices. This is due to
tp->link_up flag never becoming true causing tg3_periodic_fetch_stats()
to return.

The link_up flag was being updated in tg3_test_and_report_link_chg()
after setting up the phy. This function however, is not called for
phylib devices since the driver does not do the phy setup.

This patch moves the link_up flag update into the common
tg3_link_report() function that gets called for phylib devices as well
for non phylib devices when the link state changes.

To avoid updating link_up twice, we replace tg3_carrier_...() calls that
are followed by tg3_link_report(), with netif_carrier_...(). We can then
remove the unused tg3_carrier_on() function.

CC: <stable@vger.kernel.org>
Reported-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Signed-off-by: Nithin Nayak Sujir <nsujir@broadcom.com>
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/broadcom/tg3.c | 14 +++++---------
 1 file changed, 5 insertions(+), 9 deletions(-)

(limited to 'drivers/net/ethernet')

diff --git a/drivers/net/ethernet/broadcom/tg3.c b/drivers/net/ethernet/broadcom/tg3.c
index fdb9b5655414..93729f942358 100644
--- a/drivers/net/ethernet/broadcom/tg3.c
+++ b/drivers/net/ethernet/broadcom/tg3.c
@@ -1869,6 +1869,8 @@ static void tg3_link_report(struct tg3 *tp)
 
 		tg3_ump_link_report(tp);
 	}
+
+	tp->link_up = netif_carrier_ok(tp->dev);
 }
 
 static u16 tg3_advert_flowctrl_1000X(u8 flow_ctrl)
@@ -2522,12 +2524,6 @@ static int tg3_phy_reset_5703_4_5(struct tg3 *tp)
 	return err;
 }
 
-static void tg3_carrier_on(struct tg3 *tp)
-{
-	netif_carrier_on(tp->dev);
-	tp->link_up = true;
-}
-
 static void tg3_carrier_off(struct tg3 *tp)
 {
 	netif_carrier_off(tp->dev);
@@ -2553,7 +2549,7 @@ static int tg3_phy_reset(struct tg3 *tp)
 		return -EBUSY;
 
 	if (netif_running(tp->dev) && tp->link_up) {
-		tg3_carrier_off(tp);
+		netif_carrier_off(tp->dev);
 		tg3_link_report(tp);
 	}
 
@@ -4262,9 +4258,9 @@ static bool tg3_test_and_report_link_chg(struct tg3 *tp, int curr_link_up)
 {
 	if (curr_link_up != tp->link_up) {
 		if (curr_link_up) {
-			tg3_carrier_on(tp);
+			netif_carrier_on(tp->dev);
 		} else {
-			tg3_carrier_off(tp);
+			netif_carrier_off(tp->dev);
 			if (tp->phy_flags & TG3_PHYFLG_MII_SERDES)
 				tp->phy_flags &= ~TG3_PHYFLG_PARALLEL_DETECT;
 		}
-- 
cgit v1.2.3-59-g8ed1b


From 47ce9c4821fa41ef72c1004e1a362d08334cd717 Mon Sep 17 00:00:00 2001
From: Santosh Rastapur <santosh@chelsio.com>
Date: Fri, 8 Mar 2013 03:35:29 +0000
Subject: cxgb4: Allow for backward compatibility with new VPD scheme.

New scheme calls for 3rd party VPD at offset 0x0 and Chelsio VPD at offset
0x400 of the function.  If no 3rd party VPD is present, then a copy of
Chelsio's VPD will be at offset 0x0 to keep in line with PCI spec which
requires the VPD to be present at offset 0x0.

Signed-off-by: Santosh Rastapur <santosh@chelsio.com>
Signed-off-by: Vipul Pandya <vipul@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/chelsio/cxgb4/t4_hw.c | 12 +++++++++---
 1 file changed, 9 insertions(+), 3 deletions(-)

(limited to 'drivers/net/ethernet')

diff --git a/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c b/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c
index 4ce62031f62f..8049268ce0f2 100644
--- a/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c
+++ b/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c
@@ -497,8 +497,9 @@ int t4_memory_write(struct adapter *adap, int mtype, u32 addr, u32 len,
 }
 
 #define EEPROM_STAT_ADDR   0x7bfc
-#define VPD_BASE           0
 #define VPD_LEN            512
+#define VPD_BASE           0x400
+#define VPD_BASE_OLD       0
 
 /**
  *	t4_seeprom_wp - enable/disable EEPROM write protection
@@ -524,7 +525,7 @@ int t4_seeprom_wp(struct adapter *adapter, bool enable)
 int get_vpd_params(struct adapter *adapter, struct vpd_params *p)
 {
 	u32 cclk_param, cclk_val;
-	int i, ret;
+	int i, ret, addr;
 	int ec, sn;
 	u8 *vpd, csum;
 	unsigned int vpdr_len, kw_offset, id_len;
@@ -533,7 +534,12 @@ int get_vpd_params(struct adapter *adapter, struct vpd_params *p)
 	if (!vpd)
 		return -ENOMEM;
 
-	ret = pci_read_vpd(adapter->pdev, VPD_BASE, VPD_LEN, vpd);
+	ret = pci_read_vpd(adapter->pdev, VPD_BASE, sizeof(u32), vpd);
+	if (ret < 0)
+		goto out;
+	addr = *vpd == 0x82 ? VPD_BASE : VPD_BASE_OLD;
+
+	ret = pci_read_vpd(adapter->pdev, addr, VPD_LEN, vpd);
 	if (ret < 0)
 		goto out;
 
-- 
cgit v1.2.3-59-g8ed1b