From 1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sat, 16 Apr 2005 15:20:36 -0700 Subject: Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip! --- drivers/net/ibm_emac/Makefile | 12 + drivers/net/ibm_emac/ibm_emac.h | 267 +++++ drivers/net/ibm_emac/ibm_emac_core.c | 2012 +++++++++++++++++++++++++++++++++ drivers/net/ibm_emac/ibm_emac_core.h | 146 +++ drivers/net/ibm_emac/ibm_emac_debug.c | 224 ++++ drivers/net/ibm_emac/ibm_emac_mal.c | 463 ++++++++ drivers/net/ibm_emac/ibm_emac_mal.h | 131 +++ drivers/net/ibm_emac/ibm_emac_phy.c | 298 +++++ drivers/net/ibm_emac/ibm_emac_phy.h | 137 +++ drivers/net/ibm_emac/ibm_emac_rgmii.h | 65 ++ drivers/net/ibm_emac/ibm_emac_tah.h | 48 + drivers/net/ibm_emac/ibm_emac_zmii.h | 93 ++ 12 files changed, 3896 insertions(+) create mode 100644 drivers/net/ibm_emac/Makefile create mode 100644 drivers/net/ibm_emac/ibm_emac.h create mode 100644 drivers/net/ibm_emac/ibm_emac_core.c create mode 100644 drivers/net/ibm_emac/ibm_emac_core.h create mode 100644 drivers/net/ibm_emac/ibm_emac_debug.c create mode 100644 drivers/net/ibm_emac/ibm_emac_mal.c create mode 100644 drivers/net/ibm_emac/ibm_emac_mal.h create mode 100644 drivers/net/ibm_emac/ibm_emac_phy.c create mode 100644 drivers/net/ibm_emac/ibm_emac_phy.h create mode 100644 drivers/net/ibm_emac/ibm_emac_rgmii.h create mode 100644 drivers/net/ibm_emac/ibm_emac_tah.h create mode 100644 drivers/net/ibm_emac/ibm_emac_zmii.h (limited to 'drivers/net/ibm_emac') diff --git a/drivers/net/ibm_emac/Makefile b/drivers/net/ibm_emac/Makefile new file mode 100644 index 000000000000..7f583a333c24 --- /dev/null +++ b/drivers/net/ibm_emac/Makefile @@ -0,0 +1,12 @@ +# +# Makefile for the IBM PPC4xx EMAC controllers +# + +obj-$(CONFIG_IBM_EMAC) += ibm_emac.o + +ibm_emac-objs := ibm_emac_mal.o ibm_emac_core.o ibm_emac_phy.o + +# Only need this if you want to see additional debug messages +ifeq ($(CONFIG_IBM_EMAC_ERRMSG), y) +ibm_emac-objs += ibm_emac_debug.o +endif diff --git a/drivers/net/ibm_emac/ibm_emac.h b/drivers/net/ibm_emac/ibm_emac.h new file mode 100644 index 000000000000..15d5a0e82862 --- /dev/null +++ b/drivers/net/ibm_emac/ibm_emac.h @@ -0,0 +1,267 @@ +/* + * ibm_emac.h + * + * + * Armin Kuster akuster@mvista.com + * June, 2002 + * + * Copyright 2002 MontaVista Softare Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#ifndef _IBM_EMAC_H_ +#define _IBM_EMAC_H_ +/* General defines needed for the driver */ + +/* Emac */ +typedef struct emac_regs { + u32 em0mr0; + u32 em0mr1; + u32 em0tmr0; + u32 em0tmr1; + u32 em0rmr; + u32 em0isr; + u32 em0iser; + u32 em0iahr; + u32 em0ialr; + u32 em0vtpid; + u32 em0vtci; + u32 em0ptr; + u32 em0iaht1; + u32 em0iaht2; + u32 em0iaht3; + u32 em0iaht4; + u32 em0gaht1; + u32 em0gaht2; + u32 em0gaht3; + u32 em0gaht4; + u32 em0lsah; + u32 em0lsal; + u32 em0ipgvr; + u32 em0stacr; + u32 em0trtr; + u32 em0rwmr; +} emac_t; + +/* MODE REG 0 */ +#define EMAC_M0_RXI 0x80000000 +#define EMAC_M0_TXI 0x40000000 +#define EMAC_M0_SRST 0x20000000 +#define EMAC_M0_TXE 0x10000000 +#define EMAC_M0_RXE 0x08000000 +#define EMAC_M0_WKE 0x04000000 + +/* MODE Reg 1 */ +#define EMAC_M1_FDE 0x80000000 +#define EMAC_M1_ILE 0x40000000 +#define EMAC_M1_VLE 0x20000000 +#define EMAC_M1_EIFC 0x10000000 +#define EMAC_M1_APP 0x08000000 +#define EMAC_M1_AEMI 0x02000000 +#define EMAC_M1_IST 0x01000000 +#define EMAC_M1_MF_1000GPCS 0x00c00000 /* Internal GPCS */ +#define EMAC_M1_MF_1000MBPS 0x00800000 /* External GPCS */ +#define EMAC_M1_MF_100MBPS 0x00400000 +#define EMAC_M1_RFS_16K 0x00280000 /* 000 for 512 byte */ +#define EMAC_M1_TR 0x00008000 +#ifdef CONFIG_IBM_EMAC4 +#define EMAC_M1_RFS_8K 0x00200000 +#define EMAC_M1_RFS_4K 0x00180000 +#define EMAC_M1_RFS_2K 0x00100000 +#define EMAC_M1_RFS_1K 0x00080000 +#define EMAC_M1_TX_FIFO_16K 0x00050000 /* 0's for 512 byte */ +#define EMAC_M1_TX_FIFO_8K 0x00040000 +#define EMAC_M1_TX_FIFO_4K 0x00030000 +#define EMAC_M1_TX_FIFO_2K 0x00020000 +#define EMAC_M1_TX_FIFO_1K 0x00010000 +#define EMAC_M1_TX_TR 0x00008000 +#define EMAC_M1_TX_MWSW 0x00001000 /* 0 wait for status */ +#define EMAC_M1_JUMBO_ENABLE 0x00000800 /* Upt to 9Kr status */ +#define EMAC_M1_OPB_CLK_66 0x00000008 /* 66Mhz */ +#define EMAC_M1_OPB_CLK_83 0x00000010 /* 83Mhz */ +#define EMAC_M1_OPB_CLK_100 0x00000018 /* 100Mhz */ +#define EMAC_M1_OPB_CLK_100P 0x00000020 /* 100Mhz+ */ +#else /* CONFIG_IBM_EMAC4 */ +#define EMAC_M1_RFS_4K 0x00300000 /* ~4k for 512 byte */ +#define EMAC_M1_RFS_2K 0x00200000 +#define EMAC_M1_RFS_1K 0x00100000 +#define EMAC_M1_TX_FIFO_2K 0x00080000 /* 0's for 512 byte */ +#define EMAC_M1_TX_FIFO_1K 0x00040000 +#define EMAC_M1_TR0_DEPEND 0x00010000 /* 0'x for single packet */ +#define EMAC_M1_TR1_DEPEND 0x00004000 +#define EMAC_M1_TR1_MULTI 0x00002000 +#define EMAC_M1_JUMBO_ENABLE 0x00001000 +#endif /* CONFIG_IBM_EMAC4 */ +#define EMAC_M1_BASE (EMAC_M1_TX_FIFO_2K | \ + EMAC_M1_APP | \ + EMAC_M1_TR | EMAC_M1_VLE) + +/* Transmit Mode Register 0 */ +#define EMAC_TMR0_GNP0 0x80000000 +#define EMAC_TMR0_GNP1 0x40000000 +#define EMAC_TMR0_GNPD 0x20000000 +#define EMAC_TMR0_FC 0x10000000 +#define EMAC_TMR0_TFAE_2_32 0x00000001 +#define EMAC_TMR0_TFAE_4_64 0x00000002 +#define EMAC_TMR0_TFAE_8_128 0x00000003 +#define EMAC_TMR0_TFAE_16_256 0x00000004 +#define EMAC_TMR0_TFAE_32_512 0x00000005 +#define EMAC_TMR0_TFAE_64_1024 0x00000006 +#define EMAC_TMR0_TFAE_128_2048 0x00000007 + +/* Receive Mode Register */ +#define EMAC_RMR_SP 0x80000000 +#define EMAC_RMR_SFCS 0x40000000 +#define EMAC_RMR_ARRP 0x20000000 +#define EMAC_RMR_ARP 0x10000000 +#define EMAC_RMR_AROP 0x08000000 +#define EMAC_RMR_ARPI 0x04000000 +#define EMAC_RMR_PPP 0x02000000 +#define EMAC_RMR_PME 0x01000000 +#define EMAC_RMR_PMME 0x00800000 +#define EMAC_RMR_IAE 0x00400000 +#define EMAC_RMR_MIAE 0x00200000 +#define EMAC_RMR_BAE 0x00100000 +#define EMAC_RMR_MAE 0x00080000 +#define EMAC_RMR_RFAF_2_32 0x00000001 +#define EMAC_RMR_RFAF_4_64 0x00000002 +#define EMAC_RMR_RFAF_8_128 0x00000003 +#define EMAC_RMR_RFAF_16_256 0x00000004 +#define EMAC_RMR_RFAF_32_512 0x00000005 +#define EMAC_RMR_RFAF_64_1024 0x00000006 +#define EMAC_RMR_RFAF_128_2048 0x00000007 +#define EMAC_RMR_BASE (EMAC_RMR_IAE | EMAC_RMR_BAE) + +/* Interrupt Status & enable Regs */ +#define EMAC_ISR_OVR 0x02000000 +#define EMAC_ISR_PP 0x01000000 +#define EMAC_ISR_BP 0x00800000 +#define EMAC_ISR_RP 0x00400000 +#define EMAC_ISR_SE 0x00200000 +#define EMAC_ISR_ALE 0x00100000 +#define EMAC_ISR_BFCS 0x00080000 +#define EMAC_ISR_PTLE 0x00040000 +#define EMAC_ISR_ORE 0x00020000 +#define EMAC_ISR_IRE 0x00010000 +#define EMAC_ISR_DBDM 0x00000200 +#define EMAC_ISR_DB0 0x00000100 +#define EMAC_ISR_SE0 0x00000080 +#define EMAC_ISR_TE0 0x00000040 +#define EMAC_ISR_DB1 0x00000020 +#define EMAC_ISR_SE1 0x00000010 +#define EMAC_ISR_TE1 0x00000008 +#define EMAC_ISR_MOS 0x00000002 +#define EMAC_ISR_MOF 0x00000001 + +/* STA CONTROL REG */ +#define EMAC_STACR_OC 0x00008000 +#define EMAC_STACR_PHYE 0x00004000 +#define EMAC_STACR_WRITE 0x00002000 +#define EMAC_STACR_READ 0x00001000 +#define EMAC_STACR_CLK_83MHZ 0x00000800 /* 0's for 50Mhz */ +#define EMAC_STACR_CLK_66MHZ 0x00000400 +#define EMAC_STACR_CLK_100MHZ 0x00000C00 + +/* Transmit Request Threshold Register */ +#define EMAC_TRTR_1600 0x18000000 /* 0's for 64 Bytes */ +#define EMAC_TRTR_1024 0x0f000000 +#define EMAC_TRTR_512 0x07000000 +#define EMAC_TRTR_256 0x03000000 +#define EMAC_TRTR_192 0x10000000 +#define EMAC_TRTR_128 0x01000000 + +#define EMAC_TX_CTRL_GFCS 0x0200 +#define EMAC_TX_CTRL_GP 0x0100 +#define EMAC_TX_CTRL_ISA 0x0080 +#define EMAC_TX_CTRL_RSA 0x0040 +#define EMAC_TX_CTRL_IVT 0x0020 +#define EMAC_TX_CTRL_RVT 0x0010 +#define EMAC_TX_CTRL_TAH_CSUM 0x000e /* TAH only */ +#define EMAC_TX_CTRL_TAH_SEG4 0x000a /* TAH only */ +#define EMAC_TX_CTRL_TAH_SEG3 0x0008 /* TAH only */ +#define EMAC_TX_CTRL_TAH_SEG2 0x0006 /* TAH only */ +#define EMAC_TX_CTRL_TAH_SEG1 0x0004 /* TAH only */ +#define EMAC_TX_CTRL_TAH_SEG0 0x0002 /* TAH only */ +#define EMAC_TX_CTRL_TAH_DIS 0x0000 /* TAH only */ + +#define EMAC_TX_CTRL_DFLT ( \ + MAL_TX_CTRL_INTR | EMAC_TX_CTRL_GFCS | EMAC_TX_CTRL_GP ) + +/* madmal transmit status / Control bits */ +#define EMAC_TX_ST_BFCS 0x0200 +#define EMAC_TX_ST_BPP 0x0100 +#define EMAC_TX_ST_LCS 0x0080 +#define EMAC_TX_ST_ED 0x0040 +#define EMAC_TX_ST_EC 0x0020 +#define EMAC_TX_ST_LC 0x0010 +#define EMAC_TX_ST_MC 0x0008 +#define EMAC_TX_ST_SC 0x0004 +#define EMAC_TX_ST_UR 0x0002 +#define EMAC_TX_ST_SQE 0x0001 + +/* madmal receive status / Control bits */ +#define EMAC_RX_ST_OE 0x0200 +#define EMAC_RX_ST_PP 0x0100 +#define EMAC_RX_ST_BP 0x0080 +#define EMAC_RX_ST_RP 0x0040 +#define EMAC_RX_ST_SE 0x0020 +#define EMAC_RX_ST_AE 0x0010 +#define EMAC_RX_ST_BFCS 0x0008 +#define EMAC_RX_ST_PTL 0x0004 +#define EMAC_RX_ST_ORE 0x0002 +#define EMAC_RX_ST_IRE 0x0001 +#define EMAC_BAD_RX_PACKET 0x02ff +#define EMAC_CSUM_VER_ERROR 0x0003 + +/* identify a bad rx packet dependent on emac features */ +#ifdef CONFIG_IBM_EMAC4 +#define EMAC_IS_BAD_RX_PACKET(desc) \ + (((desc & (EMAC_BAD_RX_PACKET & ~EMAC_CSUM_VER_ERROR)) || \ + ((desc & EMAC_CSUM_VER_ERROR) == EMAC_RX_ST_ORE) || \ + ((desc & EMAC_CSUM_VER_ERROR) == EMAC_RX_ST_IRE))) +#else +#define EMAC_IS_BAD_RX_PACKET(desc) \ + (desc & EMAC_BAD_RX_PACKET) +#endif + +/* SoC implementation specific EMAC register defaults */ +#if defined(CONFIG_440GP) +#define EMAC_RWMR_DEFAULT 0x80009000 +#define EMAC_TMR0_DEFAULT 0x00000000 +#define EMAC_TMR1_DEFAULT 0xf8640000 +#elif defined(CONFIG_440GX) +#define EMAC_RWMR_DEFAULT 0x1000a200 +#define EMAC_TMR0_DEFAULT EMAC_TMR0_TFAE_2_32 +#define EMAC_TMR1_DEFAULT 0xa00f0000 +#elif defined(CONFIG_440SP) +#define EMAC_RWMR_DEFAULT 0x08002000 +#define EMAC_TMR0_DEFAULT EMAC_TMR0_TFAE_128_2048 +#define EMAC_TMR1_DEFAULT 0xf8200000 +#else +#define EMAC_RWMR_DEFAULT 0x0f002000 +#define EMAC_TMR0_DEFAULT 0x00000000 +#define EMAC_TMR1_DEFAULT 0x380f0000 +#endif /* CONFIG_440GP */ + +/* Revision specific EMAC register defaults */ +#ifdef CONFIG_IBM_EMAC4 +#define EMAC_M1_DEFAULT (EMAC_M1_BASE | \ + EMAC_M1_OPB_CLK_83 | \ + EMAC_M1_TX_MWSW) +#define EMAC_RMR_DEFAULT (EMAC_RMR_BASE | \ + EMAC_RMR_RFAF_128_2048) +#define EMAC_TMR0_XMIT (EMAC_TMR0_GNP0 | \ + EMAC_TMR0_DEFAULT) +#define EMAC_TRTR_DEFAULT EMAC_TRTR_1024 +#else /* !CONFIG_IBM_EMAC4 */ +#define EMAC_M1_DEFAULT EMAC_M1_BASE +#define EMAC_RMR_DEFAULT EMAC_RMR_BASE +#define EMAC_TMR0_XMIT EMAC_TMR0_GNP0 +#define EMAC_TRTR_DEFAULT EMAC_TRTR_1600 +#endif /* CONFIG_IBM_EMAC4 */ + +#endif diff --git a/drivers/net/ibm_emac/ibm_emac_core.c b/drivers/net/ibm_emac/ibm_emac_core.c new file mode 100644 index 000000000000..ab44358ddbfc --- /dev/null +++ b/drivers/net/ibm_emac/ibm_emac_core.c @@ -0,0 +1,2012 @@ +/* + * ibm_emac_core.c + * + * Ethernet driver for the built in ethernet on the IBM 4xx PowerPC + * processors. + * + * (c) 2003 Benjamin Herrenschmidt + * + * Based on original work by + * + * Armin Kuster + * Johnnie Peters + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * TODO + * - Check for races in the "remove" code path + * - Add some Power Management to the MAC and the PHY + * - Audit remaining of non-rewritten code (--BenH) + * - Cleanup message display using msglevel mecanism + * - Address all errata + * - Audit all register update paths to ensure they + * are being written post soft reset if required. + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include + +#include "ibm_emac_core.h" + +//#define MDIO_DEBUG(fmt) printk fmt +#define MDIO_DEBUG(fmt) + +//#define LINK_DEBUG(fmt) printk fmt +#define LINK_DEBUG(fmt) + +//#define PKT_DEBUG(fmt) printk fmt +#define PKT_DEBUG(fmt) + +#define DRV_NAME "emac" +#define DRV_VERSION "2.0" +#define DRV_AUTHOR "Benjamin Herrenschmidt " +#define DRV_DESC "IBM EMAC Ethernet driver" + +/* + * When mdio_idx >= 0, contains a list of emac ocp_devs + * that have had their initialization deferred until the + * common MDIO controller has been initialized. + */ +LIST_HEAD(emac_init_list); + +MODULE_AUTHOR(DRV_AUTHOR); +MODULE_DESCRIPTION(DRV_DESC); +MODULE_LICENSE("GPL"); + +static int skb_res = SKB_RES; +module_param(skb_res, int, 0444); +MODULE_PARM_DESC(skb_res, "Amount of data to reserve on skb buffs\n" + "The 405 handles a misaligned IP header fine but\n" + "this can help if you are routing to a tunnel or a\n" + "device that needs aligned data. 0..2"); + +#define RGMII_PRIV(ocpdev) ((struct ibm_ocp_rgmii*)ocp_get_drvdata(ocpdev)) + +static unsigned int rgmii_enable[] = { + RGMII_RTBI, + RGMII_RGMII, + RGMII_TBI, + RGMII_GMII +}; + +static unsigned int rgmii_speed_mask[] = { + RGMII_MII2_SPDMASK, + RGMII_MII3_SPDMASK +}; + +static unsigned int rgmii_speed100[] = { + RGMII_MII2_100MB, + RGMII_MII3_100MB +}; + +static unsigned int rgmii_speed1000[] = { + RGMII_MII2_1000MB, + RGMII_MII3_1000MB +}; + +#define ZMII_PRIV(ocpdev) ((struct ibm_ocp_zmii*)ocp_get_drvdata(ocpdev)) + +static unsigned int zmii_enable[][4] = { + {ZMII_SMII0, ZMII_RMII0, ZMII_MII0, + ~(ZMII_MDI1 | ZMII_MDI2 | ZMII_MDI3)}, + {ZMII_SMII1, ZMII_RMII1, ZMII_MII1, + ~(ZMII_MDI0 | ZMII_MDI2 | ZMII_MDI3)}, + {ZMII_SMII2, ZMII_RMII2, ZMII_MII2, + ~(ZMII_MDI0 | ZMII_MDI1 | ZMII_MDI3)}, + {ZMII_SMII3, ZMII_RMII3, ZMII_MII3, ~(ZMII_MDI0 | ZMII_MDI1 | ZMII_MDI2)} +}; + +static unsigned int mdi_enable[] = { + ZMII_MDI0, + ZMII_MDI1, + ZMII_MDI2, + ZMII_MDI3 +}; + +static unsigned int zmii_speed = 0x0; +static unsigned int zmii_speed100[] = { + ZMII_MII0_100MB, + ZMII_MII1_100MB, + ZMII_MII2_100MB, + ZMII_MII3_100MB +}; + +/* Since multiple EMACs share MDIO lines in various ways, we need + * to avoid re-using the same PHY ID in cases where the arch didn't + * setup precise phy_map entries + */ +static u32 busy_phy_map = 0; + +/* If EMACs share a common MDIO device, this points to it */ +static struct net_device *mdio_ndev = NULL; + +struct emac_def_dev { + struct list_head link; + struct ocp_device *ocpdev; + struct ibm_ocp_mal *mal; +}; + +static struct net_device_stats *emac_stats(struct net_device *dev) +{ + struct ocp_enet_private *fep = dev->priv; + return &fep->stats; +}; + +static int +emac_init_rgmii(struct ocp_device *rgmii_dev, int input, int phy_mode) +{ + struct ibm_ocp_rgmii *rgmii = RGMII_PRIV(rgmii_dev); + const char *mode_name[] = { "RTBI", "RGMII", "TBI", "GMII" }; + int mode = -1; + + if (!rgmii) { + rgmii = kmalloc(sizeof(struct ibm_ocp_rgmii), GFP_KERNEL); + + if (rgmii == NULL) { + printk(KERN_ERR + "rgmii%d: Out of memory allocating RGMII structure!\n", + rgmii_dev->def->index); + return -ENOMEM; + } + + memset(rgmii, 0, sizeof(*rgmii)); + + rgmii->base = + (struct rgmii_regs *)ioremap(rgmii_dev->def->paddr, + sizeof(*rgmii->base)); + if (rgmii->base == NULL) { + printk(KERN_ERR + "rgmii%d: Cannot ioremap bridge registers!\n", + rgmii_dev->def->index); + + kfree(rgmii); + return -ENOMEM; + } + ocp_set_drvdata(rgmii_dev, rgmii); + } + + if (phy_mode) { + switch (phy_mode) { + case PHY_MODE_GMII: + mode = GMII; + break; + case PHY_MODE_TBI: + mode = TBI; + break; + case PHY_MODE_RTBI: + mode = RTBI; + break; + case PHY_MODE_RGMII: + default: + mode = RGMII; + } + rgmii->base->fer &= ~RGMII_FER_MASK(input); + rgmii->base->fer |= rgmii_enable[mode] << (4 * input); + } else { + switch ((rgmii->base->fer & RGMII_FER_MASK(input)) >> (4 * + input)) { + case RGMII_RTBI: + mode = RTBI; + break; + case RGMII_RGMII: + mode = RGMII; + break; + case RGMII_TBI: + mode = TBI; + break; + case RGMII_GMII: + mode = GMII; + } + } + + /* Set mode to RGMII if nothing valid is detected */ + if (mode < 0) + mode = RGMII; + + printk(KERN_NOTICE "rgmii%d: input %d in %s mode\n", + rgmii_dev->def->index, input, mode_name[mode]); + + rgmii->mode[input] = mode; + rgmii->users++; + + return 0; +} + +static void +emac_rgmii_port_speed(struct ocp_device *ocpdev, int input, int speed) +{ + struct ibm_ocp_rgmii *rgmii = RGMII_PRIV(ocpdev); + unsigned int rgmii_speed; + + rgmii_speed = in_be32(&rgmii->base->ssr); + + rgmii_speed &= ~rgmii_speed_mask[input]; + + if (speed == 1000) + rgmii_speed |= rgmii_speed1000[input]; + else if (speed == 100) + rgmii_speed |= rgmii_speed100[input]; + + out_be32(&rgmii->base->ssr, rgmii_speed); +} + +static void emac_close_rgmii(struct ocp_device *ocpdev) +{ + struct ibm_ocp_rgmii *rgmii = RGMII_PRIV(ocpdev); + BUG_ON(!rgmii || rgmii->users == 0); + + if (!--rgmii->users) { + ocp_set_drvdata(ocpdev, NULL); + iounmap((void *)rgmii->base); + kfree(rgmii); + } +} + +static int emac_init_zmii(struct ocp_device *zmii_dev, int input, int phy_mode) +{ + struct ibm_ocp_zmii *zmii = ZMII_PRIV(zmii_dev); + const char *mode_name[] = { "SMII", "RMII", "MII" }; + int mode = -1; + + if (!zmii) { + zmii = kmalloc(sizeof(struct ibm_ocp_zmii), GFP_KERNEL); + if (zmii == NULL) { + printk(KERN_ERR + "zmii%d: Out of memory allocating ZMII structure!\n", + zmii_dev->def->index); + return -ENOMEM; + } + memset(zmii, 0, sizeof(*zmii)); + + zmii->base = + (struct zmii_regs *)ioremap(zmii_dev->def->paddr, + sizeof(*zmii->base)); + if (zmii->base == NULL) { + printk(KERN_ERR + "zmii%d: Cannot ioremap bridge registers!\n", + zmii_dev->def->index); + + kfree(zmii); + return -ENOMEM; + } + ocp_set_drvdata(zmii_dev, zmii); + } + + if (phy_mode) { + switch (phy_mode) { + case PHY_MODE_MII: + mode = MII; + break; + case PHY_MODE_RMII: + mode = RMII; + break; + case PHY_MODE_SMII: + default: + mode = SMII; + } + zmii->base->fer &= ~ZMII_FER_MASK(input); + zmii->base->fer |= zmii_enable[input][mode]; + } else { + switch ((zmii->base->fer & ZMII_FER_MASK(input)) << (4 * input)) { + case ZMII_MII0: + mode = MII; + break; + case ZMII_RMII0: + mode = RMII; + break; + case ZMII_SMII0: + mode = SMII; + } + } + + /* Set mode to SMII if nothing valid is detected */ + if (mode < 0) + mode = SMII; + + printk(KERN_NOTICE "zmii%d: input %d in %s mode\n", + zmii_dev->def->index, input, mode_name[mode]); + + zmii->mode[input] = mode; + zmii->users++; + + return 0; +} + +static void emac_enable_zmii_port(struct ocp_device *ocpdev, int input) +{ + u32 mask; + struct ibm_ocp_zmii *zmii = ZMII_PRIV(ocpdev); + + mask = in_be32(&zmii->base->fer); + mask &= zmii_enable[input][MDI]; /* turn all non enabled MDI's off */ + mask |= zmii_enable[input][zmii->mode[input]] | mdi_enable[input]; + out_be32(&zmii->base->fer, mask); +} + +static void +emac_zmii_port_speed(struct ocp_device *ocpdev, int input, int speed) +{ + struct ibm_ocp_zmii *zmii = ZMII_PRIV(ocpdev); + + if (speed == 100) + zmii_speed |= zmii_speed100[input]; + else + zmii_speed &= ~zmii_speed100[input]; + + out_be32(&zmii->base->ssr, zmii_speed); +} + +static void emac_close_zmii(struct ocp_device *ocpdev) +{ + struct ibm_ocp_zmii *zmii = ZMII_PRIV(ocpdev); + BUG_ON(!zmii || zmii->users == 0); + + if (!--zmii->users) { + ocp_set_drvdata(ocpdev, NULL); + iounmap((void *)zmii->base); + kfree(zmii); + } +} + +int emac_phy_read(struct net_device *dev, int mii_id, int reg) +{ + int count; + uint32_t stacr; + struct ocp_enet_private *fep = dev->priv; + emac_t *emacp = fep->emacp; + + MDIO_DEBUG(("%s: phy_read, id: 0x%x, reg: 0x%x\n", dev->name, mii_id, + reg)); + + /* Enable proper ZMII port */ + if (fep->zmii_dev) + emac_enable_zmii_port(fep->zmii_dev, fep->zmii_input); + + /* Use the EMAC that has the MDIO port */ + if (fep->mdio_dev) { + dev = fep->mdio_dev; + fep = dev->priv; + emacp = fep->emacp; + } + + count = 0; + while ((((stacr = in_be32(&emacp->em0stacr)) & EMAC_STACR_OC) == 0) + && (count++ < MDIO_DELAY)) + udelay(1); + MDIO_DEBUG((" (count was %d)\n", count)); + + if ((stacr & EMAC_STACR_OC) == 0) { + printk(KERN_WARNING "%s: PHY read timeout #1!\n", dev->name); + return -1; + } + + /* Clear the speed bits and make a read request to the PHY */ + stacr = ((EMAC_STACR_READ | (reg & 0x1f)) & ~EMAC_STACR_CLK_100MHZ); + stacr |= ((mii_id & 0x1F) << 5); + + out_be32(&emacp->em0stacr, stacr); + + count = 0; + while ((((stacr = in_be32(&emacp->em0stacr)) & EMAC_STACR_OC) == 0) + && (count++ < MDIO_DELAY)) + udelay(1); + MDIO_DEBUG((" (count was %d)\n", count)); + + if ((stacr & EMAC_STACR_OC) == 0) { + printk(KERN_WARNING "%s: PHY read timeout #2!\n", dev->name); + return -1; + } + + /* Check for a read error */ + if (stacr & EMAC_STACR_PHYE) { + MDIO_DEBUG(("EMAC MDIO PHY error !\n")); + return -1; + } + + MDIO_DEBUG((" -> 0x%x\n", stacr >> 16)); + + return (stacr >> 16); +} + +void emac_phy_write(struct net_device *dev, int mii_id, int reg, int data) +{ + int count; + uint32_t stacr; + struct ocp_enet_private *fep = dev->priv; + emac_t *emacp = fep->emacp; + + MDIO_DEBUG(("%s phy_write, id: 0x%x, reg: 0x%x, data: 0x%x\n", + dev->name, mii_id, reg, data)); + + /* Enable proper ZMII port */ + if (fep->zmii_dev) + emac_enable_zmii_port(fep->zmii_dev, fep->zmii_input); + + /* Use the EMAC that has the MDIO port */ + if (fep->mdio_dev) { + dev = fep->mdio_dev; + fep = dev->priv; + emacp = fep->emacp; + } + + count = 0; + while ((((stacr = in_be32(&emacp->em0stacr)) & EMAC_STACR_OC) == 0) + && (count++ < MDIO_DELAY)) + udelay(1); + MDIO_DEBUG((" (count was %d)\n", count)); + + if ((stacr & EMAC_STACR_OC) == 0) { + printk(KERN_WARNING "%s: PHY write timeout #2!\n", dev->name); + return; + } + + /* Clear the speed bits and make a read request to the PHY */ + + stacr = ((EMAC_STACR_WRITE | (reg & 0x1f)) & ~EMAC_STACR_CLK_100MHZ); + stacr |= ((mii_id & 0x1f) << 5) | ((data & 0xffff) << 16); + + out_be32(&emacp->em0stacr, stacr); + + count = 0; + while ((((stacr = in_be32(&emacp->em0stacr)) & EMAC_STACR_OC) == 0) + && (count++ < MDIO_DELAY)) + udelay(1); + MDIO_DEBUG((" (count was %d)\n", count)); + + if ((stacr & EMAC_STACR_OC) == 0) + printk(KERN_WARNING "%s: PHY write timeout #2!\n", dev->name); + + /* Check for a write error */ + if ((stacr & EMAC_STACR_PHYE) != 0) { + MDIO_DEBUG(("EMAC MDIO PHY error !\n")); + } +} + +static void emac_txeob_dev(void *param, u32 chanmask) +{ + struct net_device *dev = param; + struct ocp_enet_private *fep = dev->priv; + unsigned long flags; + + spin_lock_irqsave(&fep->lock, flags); + + PKT_DEBUG(("emac_txeob_dev() entry, tx_cnt: %d\n", fep->tx_cnt)); + + while (fep->tx_cnt && + !(fep->tx_desc[fep->ack_slot].ctrl & MAL_TX_CTRL_READY)) { + + if (fep->tx_desc[fep->ack_slot].ctrl & MAL_TX_CTRL_LAST) { + /* Tell the system the transmit completed. */ + dma_unmap_single(&fep->ocpdev->dev, + fep->tx_desc[fep->ack_slot].data_ptr, + fep->tx_desc[fep->ack_slot].data_len, + DMA_TO_DEVICE); + dev_kfree_skb_irq(fep->tx_skb[fep->ack_slot]); + + if (fep->tx_desc[fep->ack_slot].ctrl & + (EMAC_TX_ST_EC | EMAC_TX_ST_MC | EMAC_TX_ST_SC)) + fep->stats.collisions++; + } + + fep->tx_skb[fep->ack_slot] = (struct sk_buff *)NULL; + if (++fep->ack_slot == NUM_TX_BUFF) + fep->ack_slot = 0; + + fep->tx_cnt--; + } + if (fep->tx_cnt < NUM_TX_BUFF) + netif_wake_queue(dev); + + PKT_DEBUG(("emac_txeob_dev() exit, tx_cnt: %d\n", fep->tx_cnt)); + + spin_unlock_irqrestore(&fep->lock, flags); +} + +/* + Fill/Re-fill the rx chain with valid ctrl/ptrs. + This function will fill from rx_slot up to the parm end. + So to completely fill the chain pre-set rx_slot to 0 and + pass in an end of 0. + */ +static void emac_rx_fill(struct net_device *dev, int end) +{ + int i; + struct ocp_enet_private *fep = dev->priv; + + i = fep->rx_slot; + do { + /* We don't want the 16 bytes skb_reserve done by dev_alloc_skb, + * it breaks our cache line alignement. However, we still allocate + * +16 so that we end up allocating the exact same size as + * dev_alloc_skb() would do. + * Also, because of the skb_res, the max DMA size we give to EMAC + * is slighly wrong, causing it to potentially DMA 2 more bytes + * from a broken/oversized packet. These 16 bytes will take care + * that we don't walk on somebody else toes with that. + */ + fep->rx_skb[i] = + alloc_skb(fep->rx_buffer_size + 16, GFP_ATOMIC); + + if (fep->rx_skb[i] == NULL) { + /* Keep rx_slot here, the next time clean/fill is called + * we will try again before the MAL wraps back here + * If the MAL tries to use this descriptor with + * the EMPTY bit off it will cause the + * rxde interrupt. That is where we will + * try again to allocate an sk_buff. + */ + break; + + } + + if (skb_res) + skb_reserve(fep->rx_skb[i], skb_res); + + /* We must NOT dma_map_single the cache line right after the + * buffer, so we must crop our sync size to account for the + * reserved space + */ + fep->rx_desc[i].data_ptr = + (unsigned char *)dma_map_single(&fep->ocpdev->dev, + (void *)fep->rx_skb[i]-> + data, + fep->rx_buffer_size - + skb_res, DMA_FROM_DEVICE); + + /* + * Some 4xx implementations use the previously + * reserved bits in data_len to encode the MS + * 4-bits of a 36-bit physical address (ERPN) + * This must be initialized. + */ + fep->rx_desc[i].data_len = 0; + fep->rx_desc[i].ctrl = MAL_RX_CTRL_EMPTY | MAL_RX_CTRL_INTR | + (i == (NUM_RX_BUFF - 1) ? MAL_RX_CTRL_WRAP : 0); + + } while ((i = (i + 1) % NUM_RX_BUFF) != end); + + fep->rx_slot = i; +} + +static void +emac_rx_csum(struct net_device *dev, unsigned short ctrl, struct sk_buff *skb) +{ + struct ocp_enet_private *fep = dev->priv; + + /* Exit if interface has no TAH engine */ + if (!fep->tah_dev) { + skb->ip_summed = CHECKSUM_NONE; + return; + } + + /* Check for TCP/UDP/IP csum error */ + if (ctrl & EMAC_CSUM_VER_ERROR) { + /* Let the stack verify checksum errors */ + skb->ip_summed = CHECKSUM_NONE; +/* adapter->hw_csum_err++; */ + } else { + /* Csum is good */ + skb->ip_summed = CHECKSUM_UNNECESSARY; +/* adapter->hw_csum_good++; */ + } +} + +static int emac_rx_clean(struct net_device *dev) +{ + int i, b, bnum = 0, buf[6]; + int error, frame_length; + struct ocp_enet_private *fep = dev->priv; + unsigned short ctrl; + + i = fep->rx_slot; + + PKT_DEBUG(("emac_rx_clean() entry, rx_slot: %d\n", fep->rx_slot)); + + do { + if (fep->rx_skb[i] == NULL) + continue; /*we have already handled the packet but haved failed to alloc */ + /* + since rx_desc is in uncached mem we don't keep reading it directly + we pull out a local copy of ctrl and do the checks on the copy. + */ + ctrl = fep->rx_desc[i].ctrl; + if (ctrl & MAL_RX_CTRL_EMPTY) + break; /*we don't have any more ready packets */ + + if (EMAC_IS_BAD_RX_PACKET(ctrl)) { + fep->stats.rx_errors++; + fep->stats.rx_dropped++; + + if (ctrl & EMAC_RX_ST_OE) + fep->stats.rx_fifo_errors++; + if (ctrl & EMAC_RX_ST_AE) + fep->stats.rx_frame_errors++; + if (ctrl & EMAC_RX_ST_BFCS) + fep->stats.rx_crc_errors++; + if (ctrl & (EMAC_RX_ST_RP | EMAC_RX_ST_PTL | + EMAC_RX_ST_ORE | EMAC_RX_ST_IRE)) + fep->stats.rx_length_errors++; + } else { + if ((ctrl & (MAL_RX_CTRL_FIRST | MAL_RX_CTRL_LAST)) == + (MAL_RX_CTRL_FIRST | MAL_RX_CTRL_LAST)) { + /* Single descriptor packet */ + emac_rx_csum(dev, ctrl, fep->rx_skb[i]); + /* Send the skb up the chain. */ + frame_length = fep->rx_desc[i].data_len - 4; + skb_put(fep->rx_skb[i], frame_length); + fep->rx_skb[i]->dev = dev; + fep->rx_skb[i]->protocol = + eth_type_trans(fep->rx_skb[i], dev); + error = netif_rx(fep->rx_skb[i]); + + if ((error == NET_RX_DROP) || + (error == NET_RX_BAD)) { + fep->stats.rx_dropped++; + } else { + fep->stats.rx_packets++; + fep->stats.rx_bytes += frame_length; + } + fep->rx_skb[i] = NULL; + } else { + /* Multiple descriptor packet */ + if (ctrl & MAL_RX_CTRL_FIRST) { + if (fep->rx_desc[(i + 1) % NUM_RX_BUFF]. + ctrl & MAL_RX_CTRL_EMPTY) + break; + bnum = 0; + buf[bnum] = i; + ++bnum; + continue; + } + if (((ctrl & MAL_RX_CTRL_FIRST) != + MAL_RX_CTRL_FIRST) && + ((ctrl & MAL_RX_CTRL_LAST) != + MAL_RX_CTRL_LAST)) { + if (fep->rx_desc[(i + 1) % + NUM_RX_BUFF].ctrl & + MAL_RX_CTRL_EMPTY) { + i = buf[0]; + break; + } + buf[bnum] = i; + ++bnum; + continue; + } + if (ctrl & MAL_RX_CTRL_LAST) { + buf[bnum] = i; + ++bnum; + skb_put(fep->rx_skb[buf[0]], + fep->rx_desc[buf[0]].data_len); + for (b = 1; b < bnum; b++) { + /* + * MAL is braindead, we need + * to copy the remainder + * of the packet from the + * latter descriptor buffers + * to the first skb. Then + * dispose of the source + * skbs. + * + * Once the stack is fixed + * to handle frags on most + * protocols we can generate + * a fragmented skb with + * no copies. + */ + memcpy(fep->rx_skb[buf[0]]-> + data + + fep->rx_skb[buf[0]]->len, + fep->rx_skb[buf[b]]-> + data, + fep->rx_desc[buf[b]]. + data_len); + skb_put(fep->rx_skb[buf[0]], + fep->rx_desc[buf[b]]. + data_len); + dma_unmap_single(&fep->ocpdev-> + dev, + fep-> + rx_desc[buf + [b]]. + data_ptr, + fep-> + rx_desc[buf + [b]]. + data_len, + DMA_FROM_DEVICE); + dev_kfree_skb(fep-> + rx_skb[buf[b]]); + } + emac_rx_csum(dev, ctrl, + fep->rx_skb[buf[0]]); + + fep->rx_skb[buf[0]]->dev = dev; + fep->rx_skb[buf[0]]->protocol = + eth_type_trans(fep->rx_skb[buf[0]], + dev); + error = netif_rx(fep->rx_skb[buf[0]]); + + if ((error == NET_RX_DROP) + || (error == NET_RX_BAD)) { + fep->stats.rx_dropped++; + } else { + fep->stats.rx_packets++; + fep->stats.rx_bytes += + fep->rx_skb[buf[0]]->len; + } + for (b = 0; b < bnum; b++) + fep->rx_skb[buf[b]] = NULL; + } + } + } + } while ((i = (i + 1) % NUM_RX_BUFF) != fep->rx_slot); + + PKT_DEBUG(("emac_rx_clean() exit, rx_slot: %d\n", fep->rx_slot)); + + return i; +} + +static void emac_rxeob_dev(void *param, u32 chanmask) +{ + struct net_device *dev = param; + struct ocp_enet_private *fep = dev->priv; + unsigned long flags; + int n; + + spin_lock_irqsave(&fep->lock, flags); + if ((n = emac_rx_clean(dev)) != fep->rx_slot) + emac_rx_fill(dev, n); + spin_unlock_irqrestore(&fep->lock, flags); +} + +/* + * This interrupt should never occurr, we don't program + * the MAL for contiunous mode. + */ +static void emac_txde_dev(void *param, u32 chanmask) +{ + struct net_device *dev = param; + struct ocp_enet_private *fep = dev->priv; + + printk(KERN_WARNING "%s: transmit descriptor error\n", dev->name); + + emac_mac_dump(dev); + emac_mal_dump(dev); + + /* Reenable the transmit channel */ + mal_enable_tx_channels(fep->mal, fep->commac.tx_chan_mask); +} + +/* + * This interrupt should be very rare at best. This occurs when + * the hardware has a problem with the receive descriptors. The manual + * states that it occurs when the hardware cannot the receive descriptor + * empty bit is not set. The recovery mechanism will be to + * traverse through the descriptors, handle any that are marked to be + * handled and reinitialize each along the way. At that point the driver + * will be restarted. + */ +static void emac_rxde_dev(void *param, u32 chanmask) +{ + struct net_device *dev = param; + struct ocp_enet_private *fep = dev->priv; + unsigned long flags; + + if (net_ratelimit()) { + printk(KERN_WARNING "%s: receive descriptor error\n", + fep->ndev->name); + + emac_mac_dump(dev); + emac_mal_dump(dev); + emac_desc_dump(dev); + } + + /* Disable RX channel */ + spin_lock_irqsave(&fep->lock, flags); + mal_disable_rx_channels(fep->mal, fep->commac.rx_chan_mask); + + /* For now, charge the error against all emacs */ + fep->stats.rx_errors++; + + /* so do we have any good packets still? */ + emac_rx_clean(dev); + + /* When the interface is restarted it resets processing to the + * first descriptor in the table. + */ + + fep->rx_slot = 0; + emac_rx_fill(dev, 0); + + set_mal_dcrn(fep->mal, DCRN_MALRXEOBISR, fep->commac.rx_chan_mask); + set_mal_dcrn(fep->mal, DCRN_MALRXDEIR, fep->commac.rx_chan_mask); + + /* Reenable the receive channels */ + mal_enable_rx_channels(fep->mal, fep->commac.rx_chan_mask); + spin_unlock_irqrestore(&fep->lock, flags); +} + +static irqreturn_t +emac_mac_irq(int irq, void *dev_instance, struct pt_regs *regs) +{ + struct net_device *dev = dev_instance; + struct ocp_enet_private *fep = dev->priv; + emac_t *emacp = fep->emacp; + unsigned long tmp_em0isr; + + /* EMAC interrupt */ + tmp_em0isr = in_be32(&emacp->em0isr); + if (tmp_em0isr & (EMAC_ISR_TE0 | EMAC_ISR_TE1)) { + /* This error is a hard transmit error - could retransmit */ + fep->stats.tx_errors++; + + /* Reenable the transmit channel */ + mal_enable_tx_channels(fep->mal, fep->commac.tx_chan_mask); + + } else { + fep->stats.rx_errors++; + } + + if (tmp_em0isr & EMAC_ISR_RP) + fep->stats.rx_length_errors++; + if (tmp_em0isr & EMAC_ISR_ALE) + fep->stats.rx_frame_errors++; + if (tmp_em0isr & EMAC_ISR_BFCS) + fep->stats.rx_crc_errors++; + if (tmp_em0isr & EMAC_ISR_PTLE) + fep->stats.rx_length_errors++; + if (tmp_em0isr & EMAC_ISR_ORE) + fep->stats.rx_length_errors++; + if (tmp_em0isr & EMAC_ISR_TE0) + fep->stats.tx_aborted_errors++; + + emac_err_dump(dev, tmp_em0isr); + + out_be32(&emacp->em0isr, tmp_em0isr); + + return IRQ_HANDLED; +} + +static int emac_start_xmit(struct sk_buff *skb, struct net_device *dev) +{ + unsigned short ctrl; + unsigned long flags; + struct ocp_enet_private *fep = dev->priv; + emac_t *emacp = fep->emacp; + int len = skb->len; + unsigned int offset = 0, size, f, tx_slot_first; + unsigned int nr_frags = skb_shinfo(skb)->nr_frags; + + spin_lock_irqsave(&fep->lock, flags); + + len -= skb->data_len; + + if ((fep->tx_cnt + nr_frags + len / DESC_BUF_SIZE + 1) > NUM_TX_BUFF) { + PKT_DEBUG(("emac_start_xmit() stopping queue\n")); + netif_stop_queue(dev); + spin_unlock_irqrestore(&fep->lock, flags); + return -EBUSY; + } + + tx_slot_first = fep->tx_slot; + + while (len) { + size = min(len, DESC_BUF_SIZE); + + fep->tx_desc[fep->tx_slot].data_len = (short)size; + fep->tx_desc[fep->tx_slot].data_ptr = + (unsigned char *)dma_map_single(&fep->ocpdev->dev, + (void *)((unsigned int)skb-> + data + offset), + size, DMA_TO_DEVICE); + + ctrl = EMAC_TX_CTRL_DFLT; + if (fep->tx_slot != tx_slot_first) + ctrl |= MAL_TX_CTRL_READY; + if ((NUM_TX_BUFF - 1) == fep->tx_slot) + ctrl |= MAL_TX_CTRL_WRAP; + if (!nr_frags && (len == size)) { + ctrl |= MAL_TX_CTRL_LAST; + fep->tx_skb[fep->tx_slot] = skb; + } + if (skb->ip_summed == CHECKSUM_HW) + ctrl |= EMAC_TX_CTRL_TAH_CSUM; + + fep->tx_desc[fep->tx_slot].ctrl = ctrl; + + len -= size; + offset += size; + + /* Bump tx count */ + if (++fep->tx_cnt == NUM_TX_BUFF) + netif_stop_queue(dev); + + /* Next descriptor */ + if (++fep->tx_slot == NUM_TX_BUFF) + fep->tx_slot = 0; + } + + for (f = 0; f < nr_frags; f++) { + struct skb_frag_struct *frag; + + frag = &skb_shinfo(skb)->frags[f]; + len = frag->size; + offset = 0; + + while (len) { + size = min(len, DESC_BUF_SIZE); + + dma_map_page(&fep->ocpdev->dev, + frag->page, + frag->page_offset + offset, + size, DMA_TO_DEVICE); + + ctrl = EMAC_TX_CTRL_DFLT | MAL_TX_CTRL_READY; + if ((NUM_TX_BUFF - 1) == fep->tx_slot) + ctrl |= MAL_TX_CTRL_WRAP; + if ((f == (nr_frags - 1)) && (len == size)) { + ctrl |= MAL_TX_CTRL_LAST; + fep->tx_skb[fep->tx_slot] = skb; + } + + if (skb->ip_summed == CHECKSUM_HW) + ctrl |= EMAC_TX_CTRL_TAH_CSUM; + + fep->tx_desc[fep->tx_slot].data_len = (short)size; + fep->tx_desc[fep->tx_slot].data_ptr = + (char *)((page_to_pfn(frag->page) << PAGE_SHIFT) + + frag->page_offset + offset); + fep->tx_desc[fep->tx_slot].ctrl = ctrl; + + len -= size; + offset += size; + + /* Bump tx count */ + if (++fep->tx_cnt == NUM_TX_BUFF) + netif_stop_queue(dev); + + /* Next descriptor */ + if (++fep->tx_slot == NUM_TX_BUFF) + fep->tx_slot = 0; + } + } + + /* + * Deferred set READY on first descriptor of packet to + * avoid TX MAL race. + */ + fep->tx_desc[tx_slot_first].ctrl |= MAL_TX_CTRL_READY; + + /* Send the packet out. */ + out_be32(&emacp->em0tmr0, EMAC_TMR0_XMIT); + + fep->stats.tx_packets++; + fep->stats.tx_bytes += skb->len; + + PKT_DEBUG(("emac_start_xmit() exitn")); + + spin_unlock_irqrestore(&fep->lock, flags); + + return 0; +} + +static int emac_adjust_to_link(struct ocp_enet_private *fep) +{ + emac_t *emacp = fep->emacp; + unsigned long mode_reg; + int full_duplex, speed; + + full_duplex = 0; + speed = SPEED_10; + + /* set mode register 1 defaults */ + mode_reg = EMAC_M1_DEFAULT; + + /* Read link mode on PHY */ + if (fep->phy_mii.def->ops->read_link(&fep->phy_mii) == 0) { + /* If an error occurred, we don't deal with it yet */ + full_duplex = (fep->phy_mii.duplex == DUPLEX_FULL); + speed = fep->phy_mii.speed; + } + + + /* set speed (default is 10Mb) */ + switch (speed) { + case SPEED_1000: + mode_reg |= EMAC_M1_RFS_16K; + if (fep->rgmii_dev) { + struct ibm_ocp_rgmii *rgmii = RGMII_PRIV(fep->rgmii_dev); + + if ((rgmii->mode[fep->rgmii_input] == RTBI) + || (rgmii->mode[fep->rgmii_input] == TBI)) + mode_reg |= EMAC_M1_MF_1000GPCS; + else + mode_reg |= EMAC_M1_MF_1000MBPS; + + emac_rgmii_port_speed(fep->rgmii_dev, fep->rgmii_input, + 1000); + } + break; + case SPEED_100: + mode_reg |= EMAC_M1_MF_100MBPS | EMAC_M1_RFS_4K; + if (fep->rgmii_dev) + emac_rgmii_port_speed(fep->rgmii_dev, fep->rgmii_input, + 100); + if (fep->zmii_dev) + emac_zmii_port_speed(fep->zmii_dev, fep->zmii_input, + 100); + break; + case SPEED_10: + default: + mode_reg = (mode_reg & ~EMAC_M1_MF_100MBPS) | EMAC_M1_RFS_4K; + if (fep->rgmii_dev) + emac_rgmii_port_speed(fep->rgmii_dev, fep->rgmii_input, + 10); + if (fep->zmii_dev) + emac_zmii_port_speed(fep->zmii_dev, fep->zmii_input, + 10); + } + + if (full_duplex) + mode_reg |= EMAC_M1_FDE | EMAC_M1_EIFC | EMAC_M1_IST; + else + mode_reg &= ~(EMAC_M1_FDE | EMAC_M1_EIFC | EMAC_M1_ILE); + + LINK_DEBUG(("%s: adjust to link, speed: %d, duplex: %d, opened: %d\n", + fep->ndev->name, speed, full_duplex, fep->opened)); + + printk(KERN_INFO "%s: Speed: %d, %s duplex.\n", + fep->ndev->name, speed, full_duplex ? "Full" : "Half"); + if (fep->opened) + out_be32(&emacp->em0mr1, mode_reg); + + return 0; +} + +static int emac_set_mac_address(struct net_device *ndev, void *p) +{ + struct ocp_enet_private *fep = ndev->priv; + emac_t *emacp = fep->emacp; + struct sockaddr *addr = p; + + if (!is_valid_ether_addr(addr->sa_data)) + return -EADDRNOTAVAIL; + + memcpy(ndev->dev_addr, addr->sa_data, ndev->addr_len); + + /* set the high address */ + out_be32(&emacp->em0iahr, + (fep->ndev->dev_addr[0] << 8) | fep->ndev->dev_addr[1]); + + /* set the low address */ + out_be32(&emacp->em0ialr, + (fep->ndev->dev_addr[2] << 24) | (fep->ndev->dev_addr[3] << 16) + | (fep->ndev->dev_addr[4] << 8) | fep->ndev->dev_addr[5]); + + return 0; +} + +static int emac_change_mtu(struct net_device *dev, int new_mtu) +{ + struct ocp_enet_private *fep = dev->priv; + int old_mtu = dev->mtu; + unsigned long mode_reg; + emac_t *emacp = fep->emacp; + u32 em0mr0; + int i, full; + unsigned long flags; + + if ((new_mtu < EMAC_MIN_MTU) || (new_mtu > EMAC_MAX_MTU)) { + printk(KERN_ERR + "emac: Invalid MTU setting, MTU must be between %d and %d\n", + EMAC_MIN_MTU, EMAC_MAX_MTU); + return -EINVAL; + } + + if (old_mtu != new_mtu && netif_running(dev)) { + /* Stop rx engine */ + em0mr0 = in_be32(&emacp->em0mr0); + out_be32(&emacp->em0mr0, em0mr0 & ~EMAC_M0_RXE); + + /* Wait for descriptors to be empty */ + do { + full = 0; + for (i = 0; i < NUM_RX_BUFF; i++) + if (!(fep->rx_desc[i].ctrl & MAL_RX_CTRL_EMPTY)) { + printk(KERN_NOTICE + "emac: RX ring is still full\n"); + full = 1; + } + } while (full); + + spin_lock_irqsave(&fep->lock, flags); + + mal_disable_rx_channels(fep->mal, fep->commac.rx_chan_mask); + + /* Destroy all old rx skbs */ + for (i = 0; i < NUM_RX_BUFF; i++) { + dma_unmap_single(&fep->ocpdev->dev, + fep->rx_desc[i].data_ptr, + fep->rx_desc[i].data_len, + DMA_FROM_DEVICE); + dev_kfree_skb(fep->rx_skb[i]); + fep->rx_skb[i] = NULL; + } + + /* Set new rx_buffer_size, jumbo cap, and advertise new mtu */ + mode_reg = in_be32(&emacp->em0mr1); + if (new_mtu > ENET_DEF_MTU_SIZE) { + mode_reg |= EMAC_M1_JUMBO_ENABLE; + fep->rx_buffer_size = EMAC_MAX_FRAME; + } else { + mode_reg &= ~EMAC_M1_JUMBO_ENABLE; + fep->rx_buffer_size = ENET_DEF_BUF_SIZE; + } + dev->mtu = new_mtu; + out_be32(&emacp->em0mr1, mode_reg); + + /* Re-init rx skbs */ + fep->rx_slot = 0; + emac_rx_fill(dev, 0); + + /* Restart the rx engine */ + mal_enable_rx_channels(fep->mal, fep->commac.rx_chan_mask); + out_be32(&emacp->em0mr0, em0mr0 | EMAC_M0_RXE); + + spin_unlock_irqrestore(&fep->lock, flags); + } + + return 0; +} + +static void __emac_set_multicast_list(struct net_device *dev) +{ + struct ocp_enet_private *fep = dev->priv; + emac_t *emacp = fep->emacp; + u32 rmr = in_be32(&emacp->em0rmr); + + /* First clear all special bits, they can be set later */ + rmr &= ~(EMAC_RMR_PME | EMAC_RMR_PMME | EMAC_RMR_MAE); + + if (dev->flags & IFF_PROMISC) { + rmr |= EMAC_RMR_PME; + } else if (dev->flags & IFF_ALLMULTI || 32 < dev->mc_count) { + /* + * Must be setting up to use multicast + * Now check for promiscuous multicast + */ + rmr |= EMAC_RMR_PMME; + } else if (dev->flags & IFF_MULTICAST && 0 < dev->mc_count) { + unsigned short em0gaht[4] = { 0, 0, 0, 0 }; + struct dev_mc_list *dmi; + + /* Need to hash on the multicast address. */ + for (dmi = dev->mc_list; dmi; dmi = dmi->next) { + unsigned long mc_crc; + unsigned int bit_number; + + mc_crc = ether_crc(6, (char *)dmi->dmi_addr); + bit_number = 63 - (mc_crc >> 26); /* MSB: 0 LSB: 63 */ + em0gaht[bit_number >> 4] |= + 0x8000 >> (bit_number & 0x0f); + } + emacp->em0gaht1 = em0gaht[0]; + emacp->em0gaht2 = em0gaht[1]; + emacp->em0gaht3 = em0gaht[2]; + emacp->em0gaht4 = em0gaht[3]; + + /* Turn on multicast addressing */ + rmr |= EMAC_RMR_MAE; + } + out_be32(&emacp->em0rmr, rmr); +} + +static int emac_init_tah(struct ocp_enet_private *fep) +{ + tah_t *tahp; + + /* Initialize TAH and enable checksum verification */ + tahp = (tah_t *) ioremap(fep->tah_dev->def->paddr, sizeof(*tahp)); + + if (tahp == NULL) { + printk(KERN_ERR "tah%d: Cannot ioremap TAH registers!\n", + fep->tah_dev->def->index); + + return -ENOMEM; + } + + out_be32(&tahp->tah_mr, TAH_MR_SR); + + /* wait for reset to complete */ + while (in_be32(&tahp->tah_mr) & TAH_MR_SR) ; + + /* 10KB TAH TX FIFO accomodates the max MTU of 9000 */ + out_be32(&tahp->tah_mr, + TAH_MR_CVR | TAH_MR_ST_768 | TAH_MR_TFS_10KB | TAH_MR_DTFP | + TAH_MR_DIG); + + iounmap(&tahp); + + return 0; +} + +static void emac_init_rings(struct net_device *dev) +{ + struct ocp_enet_private *ep = dev->priv; + int loop; + + ep->tx_desc = (struct mal_descriptor *)((char *)ep->mal->tx_virt_addr + + (ep->mal_tx_chan * + MAL_DT_ALIGN)); + ep->rx_desc = + (struct mal_descriptor *)((char *)ep->mal->rx_virt_addr + + (ep->mal_rx_chan * MAL_DT_ALIGN)); + + /* Fill in the transmit descriptor ring. */ + for (loop = 0; loop < NUM_TX_BUFF; loop++) { + if (ep->tx_skb[loop]) { + dma_unmap_single(&ep->ocpdev->dev, + ep->tx_desc[loop].data_ptr, + ep->tx_desc[loop].data_len, + DMA_TO_DEVICE); + dev_kfree_skb_irq(ep->tx_skb[loop]); + } + ep->tx_skb[loop] = NULL; + ep->tx_desc[loop].ctrl = 0; + ep->tx_desc[loop].data_len = 0; + ep->tx_desc[loop].data_ptr = NULL; + } + ep->tx_desc[loop - 1].ctrl |= MAL_TX_CTRL_WRAP; + + /* Format the receive descriptor ring. */ + ep->rx_slot = 0; + /* Default is MTU=1500 + Ethernet overhead */ + ep->rx_buffer_size = dev->mtu + ENET_HEADER_SIZE + ENET_FCS_SIZE; + emac_rx_fill(dev, 0); + if (ep->rx_slot != 0) { + printk(KERN_ERR + "%s: Not enough mem for RxChain durning Open?\n", + dev->name); + /*We couldn't fill the ring at startup? + *We could clean up and fail to open but right now we will try to + *carry on. It may be a sign of a bad NUM_RX_BUFF value + */ + } + + ep->tx_cnt = 0; + ep->tx_slot = 0; + ep->ack_slot = 0; +} + +static void emac_reset_configure(struct ocp_enet_private *fep) +{ + emac_t *emacp = fep->emacp; + int i; + + mal_disable_tx_channels(fep->mal, fep->commac.tx_chan_mask); + mal_disable_rx_channels(fep->mal, fep->commac.rx_chan_mask); + + /* + * Check for a link, some PHYs don't provide a clock if + * no link is present. Some EMACs will not come out of + * soft reset without a PHY clock present. + */ + if (fep->phy_mii.def->ops->poll_link(&fep->phy_mii)) { + /* Reset the EMAC */ + out_be32(&emacp->em0mr0, EMAC_M0_SRST); + udelay(20); + for (i = 0; i < 100; i++) { + if ((in_be32(&emacp->em0mr0) & EMAC_M0_SRST) == 0) + break; + udelay(10); + } + + if (i >= 100) { + printk(KERN_ERR "%s: Cannot reset EMAC\n", + fep->ndev->name); + return; + } + } + + /* Switch IRQs off for now */ + out_be32(&emacp->em0iser, 0); + + /* Configure MAL rx channel */ + mal_set_rcbs(fep->mal, fep->mal_rx_chan, DESC_BUF_SIZE_REG); + + /* set the high address */ + out_be32(&emacp->em0iahr, + (fep->ndev->dev_addr[0] << 8) | fep->ndev->dev_addr[1]); + + /* set the low address */ + out_be32(&emacp->em0ialr, + (fep->ndev->dev_addr[2] << 24) | (fep->ndev->dev_addr[3] << 16) + | (fep->ndev->dev_addr[4] << 8) | fep->ndev->dev_addr[5]); + + /* Adjust to link */ + if (netif_carrier_ok(fep->ndev)) + emac_adjust_to_link(fep); + + /* enable broadcast/individual address and RX FIFO defaults */ + out_be32(&emacp->em0rmr, EMAC_RMR_DEFAULT); + + /* set transmit request threshold register */ + out_be32(&emacp->em0trtr, EMAC_TRTR_DEFAULT); + + /* Reconfigure multicast */ + __emac_set_multicast_list(fep->ndev); + + /* Set receiver/transmitter defaults */ + out_be32(&emacp->em0rwmr, EMAC_RWMR_DEFAULT); + out_be32(&emacp->em0tmr0, EMAC_TMR0_DEFAULT); + out_be32(&emacp->em0tmr1, EMAC_TMR1_DEFAULT); + + /* set frame gap */ + out_be32(&emacp->em0ipgvr, CONFIG_IBM_EMAC_FGAP); + + /* set VLAN Tag Protocol Identifier */ + out_be32(&emacp->em0vtpid, 0x8100); + + /* Init ring buffers */ + emac_init_rings(fep->ndev); +} + +static void emac_kick(struct ocp_enet_private *fep) +{ + emac_t *emacp = fep->emacp; + unsigned long emac_ier; + + emac_ier = EMAC_ISR_PP | EMAC_ISR_BP | EMAC_ISR_RP | + EMAC_ISR_SE | EMAC_ISR_PTLE | EMAC_ISR_ALE | + EMAC_ISR_BFCS | EMAC_ISR_ORE | EMAC_ISR_IRE; + + out_be32(&emacp->em0iser, emac_ier); + + /* enable all MAL transmit and receive channels */ + mal_enable_tx_channels(fep->mal, fep->commac.tx_chan_mask); + mal_enable_rx_channels(fep->mal, fep->commac.rx_chan_mask); + + /* set transmit and receive enable */ + out_be32(&emacp->em0mr0, EMAC_M0_TXE | EMAC_M0_RXE); +} + +static void +emac_start_link(struct ocp_enet_private *fep, struct ethtool_cmd *ep) +{ + u32 advertise; + int autoneg; + int forced_speed; + int forced_duplex; + + /* Default advertise */ + advertise = ADVERTISED_10baseT_Half | ADVERTISED_10baseT_Full | + ADVERTISED_100baseT_Half | ADVERTISED_100baseT_Full | + ADVERTISED_1000baseT_Half | ADVERTISED_1000baseT_Full; + autoneg = fep->want_autoneg; + forced_speed = fep->phy_mii.speed; + forced_duplex = fep->phy_mii.duplex; + + /* Setup link parameters */ + if (ep) { + if (ep->autoneg == AUTONEG_ENABLE) { + advertise = ep->advertising; + autoneg = 1; + } else { + autoneg = 0; + forced_speed = ep->speed; + forced_duplex = ep->duplex; + } + } + + /* Configure PHY & start aneg */ + fep->want_autoneg = autoneg; + if (autoneg) { + LINK_DEBUG(("%s: start link aneg, advertise: 0x%x\n", + fep->ndev->name, advertise)); + fep->phy_mii.def->ops->setup_aneg(&fep->phy_mii, advertise); + } else { + LINK_DEBUG(("%s: start link forced, speed: %d, duplex: %d\n", + fep->ndev->name, forced_speed, forced_duplex)); + fep->phy_mii.def->ops->setup_forced(&fep->phy_mii, forced_speed, + forced_duplex); + } + fep->timer_ticks = 0; + mod_timer(&fep->link_timer, jiffies + HZ); +} + +static void emac_link_timer(unsigned long data) +{ + struct ocp_enet_private *fep = (struct ocp_enet_private *)data; + int link; + + if (fep->going_away) + return; + + spin_lock_irq(&fep->lock); + + link = fep->phy_mii.def->ops->poll_link(&fep->phy_mii); + LINK_DEBUG(("%s: poll_link: %d\n", fep->ndev->name, link)); + + if (link == netif_carrier_ok(fep->ndev)) { + if (!link && fep->want_autoneg && (++fep->timer_ticks) > 10) + emac_start_link(fep, NULL); + goto out; + } + printk(KERN_INFO "%s: Link is %s\n", fep->ndev->name, + link ? "Up" : "Down"); + if (link) { + netif_carrier_on(fep->ndev); + /* Chip needs a full reset on config change. That sucks, so I + * should ultimately move that to some tasklet to limit + * latency peaks caused by this code + */ + emac_reset_configure(fep); + if (fep->opened) + emac_kick(fep); + } else { + fep->timer_ticks = 0; + netif_carrier_off(fep->ndev); + } + out: + mod_timer(&fep->link_timer, jiffies + HZ); + spin_unlock_irq(&fep->lock); +} + +static void emac_set_multicast_list(struct net_device *dev) +{ + struct ocp_enet_private *fep = dev->priv; + + spin_lock_irq(&fep->lock); + __emac_set_multicast_list(dev); + spin_unlock_irq(&fep->lock); +} + +static int emac_get_settings(struct net_device *ndev, struct ethtool_cmd *cmd) +{ + struct ocp_enet_private *fep = ndev->priv; + + cmd->supported = fep->phy_mii.def->features; + cmd->port = PORT_MII; + cmd->transceiver = XCVR_EXTERNAL; + cmd->phy_address = fep->mii_phy_addr; + spin_lock_irq(&fep->lock); + cmd->autoneg = fep->want_autoneg; + cmd->speed = fep->phy_mii.speed; + cmd->duplex = fep->phy_mii.duplex; + spin_unlock_irq(&fep->lock); + return 0; +} + +static int emac_set_settings(struct net_device *ndev, struct ethtool_cmd *cmd) +{ + struct ocp_enet_private *fep = ndev->priv; + unsigned long features = fep->phy_mii.def->features; + + if (!capable(CAP_NET_ADMIN)) + return -EPERM; + + if (cmd->autoneg != AUTONEG_ENABLE && cmd->autoneg != AUTONEG_DISABLE) + return -EINVAL; + if (cmd->autoneg == AUTONEG_ENABLE && cmd->advertising == 0) + return -EINVAL; + if (cmd->duplex != DUPLEX_HALF && cmd->duplex != DUPLEX_FULL) + return -EINVAL; + if (cmd->autoneg == AUTONEG_DISABLE) + switch (cmd->speed) { + case SPEED_10: + if (cmd->duplex == DUPLEX_HALF && + (features & SUPPORTED_10baseT_Half) == 0) + return -EINVAL; + if (cmd->duplex == DUPLEX_FULL && + (features & SUPPORTED_10baseT_Full) == 0) + return -EINVAL; + break; + case SPEED_100: + if (cmd->duplex == DUPLEX_HALF && + (features & SUPPORTED_100baseT_Half) == 0) + return -EINVAL; + if (cmd->duplex == DUPLEX_FULL && + (features & SUPPORTED_100baseT_Full) == 0) + return -EINVAL; + break; + case SPEED_1000: + if (cmd->duplex == DUPLEX_HALF && + (features & SUPPORTED_1000baseT_Half) == 0) + return -EINVAL; + if (cmd->duplex == DUPLEX_FULL && + (features & SUPPORTED_1000baseT_Full) == 0) + return -EINVAL; + break; + default: + return -EINVAL; + } else if ((features & SUPPORTED_Autoneg) == 0) + return -EINVAL; + spin_lock_irq(&fep->lock); + emac_start_link(fep, cmd); + spin_unlock_irq(&fep->lock); + return 0; +} + +static void +emac_get_drvinfo(struct net_device *ndev, struct ethtool_drvinfo *info) +{ + struct ocp_enet_private *fep = ndev->priv; + + strcpy(info->driver, DRV_NAME); + strcpy(info->version, DRV_VERSION); + info->fw_version[0] = '\0'; + sprintf(info->bus_info, "IBM EMAC %d", fep->ocpdev->def->index); + info->regdump_len = 0; +} + +static int emac_nway_reset(struct net_device *ndev) +{ + struct ocp_enet_private *fep = ndev->priv; + + if (!fep->want_autoneg) + return -EINVAL; + spin_lock_irq(&fep->lock); + emac_start_link(fep, NULL); + spin_unlock_irq(&fep->lock); + return 0; +} + +static u32 emac_get_link(struct net_device *ndev) +{ + return netif_carrier_ok(ndev); +} + +static struct ethtool_ops emac_ethtool_ops = { + .get_settings = emac_get_settings, + .set_settings = emac_set_settings, + .get_drvinfo = emac_get_drvinfo, + .nway_reset = emac_nway_reset, + .get_link = emac_get_link +}; + +static int emac_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) +{ + struct ocp_enet_private *fep = dev->priv; + uint *data = (uint *) & rq->ifr_ifru; + + switch (cmd) { + case SIOCGMIIPHY: + data[0] = fep->mii_phy_addr; + /* Fall through */ + case SIOCGMIIREG: + data[3] = emac_phy_read(dev, fep->mii_phy_addr, data[1]); + return 0; + case SIOCSMIIREG: + if (!capable(CAP_NET_ADMIN)) + return -EPERM; + + emac_phy_write(dev, fep->mii_phy_addr, data[1], data[2]); + return 0; + default: + return -EOPNOTSUPP; + } +} + +static int emac_open(struct net_device *dev) +{ + struct ocp_enet_private *fep = dev->priv; + int rc; + + spin_lock_irq(&fep->lock); + + fep->opened = 1; + netif_carrier_off(dev); + + /* Reset & configure the chip */ + emac_reset_configure(fep); + + spin_unlock_irq(&fep->lock); + + /* Request our interrupt lines */ + rc = request_irq(dev->irq, emac_mac_irq, 0, "IBM EMAC MAC", dev); + if (rc != 0) { + printk("dev->irq %d failed\n", dev->irq); + goto bail; + } + /* Kick the chip rx & tx channels into life */ + spin_lock_irq(&fep->lock); + emac_kick(fep); + spin_unlock_irq(&fep->lock); + + netif_start_queue(dev); + bail: + return rc; +} + +static int emac_close(struct net_device *dev) +{ + struct ocp_enet_private *fep = dev->priv; + emac_t *emacp = fep->emacp; + + /* XXX Stop IRQ emitting here */ + spin_lock_irq(&fep->lock); + fep->opened = 0; + mal_disable_tx_channels(fep->mal, fep->commac.tx_chan_mask); + mal_disable_rx_channels(fep->mal, fep->commac.rx_chan_mask); + netif_carrier_off(dev); + netif_stop_queue(dev); + + /* + * Check for a link, some PHYs don't provide a clock if + * no link is present. Some EMACs will not come out of + * soft reset without a PHY clock present. + */ + if (fep->phy_mii.def->ops->poll_link(&fep->phy_mii)) { + out_be32(&emacp->em0mr0, EMAC_M0_SRST); + udelay(10); + + if (emacp->em0mr0 & EMAC_M0_SRST) { + /*not sure what to do here hopefully it clears before another open */ + printk(KERN_ERR + "%s: Phy SoftReset didn't clear, no link?\n", + dev->name); + } + } + + /* Free the irq's */ + free_irq(dev->irq, dev); + + spin_unlock_irq(&fep->lock); + + return 0; +} + +static void emac_remove(struct ocp_device *ocpdev) +{ + struct net_device *dev = ocp_get_drvdata(ocpdev); + struct ocp_enet_private *ep = dev->priv; + + /* FIXME: locking, races, ... */ + ep->going_away = 1; + ocp_set_drvdata(ocpdev, NULL); + if (ep->rgmii_dev) + emac_close_rgmii(ep->rgmii_dev); + if (ep->zmii_dev) + emac_close_zmii(ep->zmii_dev); + + unregister_netdev(dev); + del_timer_sync(&ep->link_timer); + mal_unregister_commac(ep->mal, &ep->commac); + iounmap((void *)ep->emacp); + kfree(dev); +} + +struct mal_commac_ops emac_commac_ops = { + .txeob = &emac_txeob_dev, + .txde = &emac_txde_dev, + .rxeob = &emac_rxeob_dev, + .rxde = &emac_rxde_dev, +}; + +#ifdef CONFIG_NET_POLL_CONTROLLER +static int emac_netpoll(struct net_device *ndev) +{ + emac_rxeob_dev((void *)ndev, 0); + emac_txeob_dev((void *)ndev, 0); + return 0; +} +#endif + +static int emac_init_device(struct ocp_device *ocpdev, struct ibm_ocp_mal *mal) +{ + int deferred_init = 0; + int rc = 0, i; + struct net_device *ndev; + struct ocp_enet_private *ep; + struct ocp_func_emac_data *emacdata; + int commac_reg = 0; + u32 phy_map; + + emacdata = (struct ocp_func_emac_data *)ocpdev->def->additions; + if (!emacdata) { + printk(KERN_ERR "emac%d: Missing additional data!\n", + ocpdev->def->index); + return -ENODEV; + } + + /* Allocate our net_device structure */ + ndev = alloc_etherdev(sizeof(struct ocp_enet_private)); + if (ndev == NULL) { + printk(KERN_ERR + "emac%d: Could not allocate ethernet device.\n", + ocpdev->def->index); + return -ENOMEM; + } + ep = ndev->priv; + ep->ndev = ndev; + ep->ocpdev = ocpdev; + ndev->irq = ocpdev->def->irq; + ep->wol_irq = emacdata->wol_irq; + if (emacdata->mdio_idx >= 0) { + if (emacdata->mdio_idx == ocpdev->def->index) { + /* Set the common MDIO net_device */ + mdio_ndev = ndev; + deferred_init = 1; + } + ep->mdio_dev = mdio_ndev; + } else { + ep->mdio_dev = ndev; + } + + ocp_set_drvdata(ocpdev, ndev); + + spin_lock_init(&ep->lock); + + /* Fill out MAL informations and register commac */ + ep->mal = mal; + ep->mal_tx_chan = emacdata->mal_tx_chan; + ep->mal_rx_chan = emacdata->mal_rx_chan; + ep->commac.ops = &emac_commac_ops; + ep->commac.dev = ndev; + ep->commac.tx_chan_mask = MAL_CHAN_MASK(ep->mal_tx_chan); + ep->commac.rx_chan_mask = MAL_CHAN_MASK(ep->mal_rx_chan); + rc = mal_register_commac(ep->mal, &ep->commac); + if (rc != 0) + goto bail; + commac_reg = 1; + + /* Map our MMIOs */ + ep->emacp = (emac_t *) ioremap(ocpdev->def->paddr, sizeof(emac_t)); + + /* Check if we need to attach to a ZMII */ + if (emacdata->zmii_idx >= 0) { + ep->zmii_input = emacdata->zmii_mux; + ep->zmii_dev = + ocp_find_device(OCP_ANY_ID, OCP_FUNC_ZMII, + emacdata->zmii_idx); + if (ep->zmii_dev == NULL) + printk(KERN_WARNING + "emac%d: ZMII %d requested but not found !\n", + ocpdev->def->index, emacdata->zmii_idx); + else if ((rc = + emac_init_zmii(ep->zmii_dev, ep->zmii_input, + emacdata->phy_mode)) != 0) + goto bail; + } + + /* Check if we need to attach to a RGMII */ + if (emacdata->rgmii_idx >= 0) { + ep->rgmii_input = emacdata->rgmii_mux; + ep->rgmii_dev = + ocp_find_device(OCP_ANY_ID, OCP_FUNC_RGMII, + emacdata->rgmii_idx); + if (ep->rgmii_dev == NULL) + printk(KERN_WARNING + "emac%d: RGMII %d requested but not found !\n", + ocpdev->def->index, emacdata->rgmii_idx); + else if ((rc = + emac_init_rgmii(ep->rgmii_dev, ep->rgmii_input, + emacdata->phy_mode)) != 0) + goto bail; + } + + /* Check if we need to attach to a TAH */ + if (emacdata->tah_idx >= 0) { + ep->tah_dev = + ocp_find_device(OCP_ANY_ID, OCP_FUNC_TAH, + emacdata->tah_idx); + if (ep->tah_dev == NULL) + printk(KERN_WARNING + "emac%d: TAH %d requested but not found !\n", + ocpdev->def->index, emacdata->tah_idx); + else if ((rc = emac_init_tah(ep)) != 0) + goto bail; + } + + if (deferred_init) { + if (!list_empty(&emac_init_list)) { + struct list_head *entry; + struct emac_def_dev *ddev; + + list_for_each(entry, &emac_init_list) { + ddev = + list_entry(entry, struct emac_def_dev, + link); + emac_init_device(ddev->ocpdev, ddev->mal); + } + } + } + + /* Init link monitoring timer */ + init_timer(&ep->link_timer); + ep->link_timer.function = emac_link_timer; + ep->link_timer.data = (unsigned long)ep; + ep->timer_ticks = 0; + + /* Fill up the mii_phy structure */ + ep->phy_mii.dev = ndev; + ep->phy_mii.mdio_read = emac_phy_read; + ep->phy_mii.mdio_write = emac_phy_write; + ep->phy_mii.mode = emacdata->phy_mode; + + /* Find PHY */ + phy_map = emacdata->phy_map | busy_phy_map; + for (i = 0; i <= 0x1f; i++, phy_map >>= 1) { + if ((phy_map & 0x1) == 0) { + int val = emac_phy_read(ndev, i, MII_BMCR); + if (val != 0xffff && val != -1) + break; + } + } + if (i == 0x20) { + printk(KERN_WARNING "emac%d: Can't find PHY.\n", + ocpdev->def->index); + rc = -ENODEV; + goto bail; + } + busy_phy_map |= 1 << i; + ep->mii_phy_addr = i; + rc = mii_phy_probe(&ep->phy_mii, i); + if (rc) { + printk(KERN_WARNING "emac%d: Failed to probe PHY type.\n", + ocpdev->def->index); + rc = -ENODEV; + goto bail; + } + + /* Setup initial PHY config & startup aneg */ + if (ep->phy_mii.def->ops->init) + ep->phy_mii.def->ops->init(&ep->phy_mii); + netif_carrier_off(ndev); + if (ep->phy_mii.def->features & SUPPORTED_Autoneg) + ep->want_autoneg = 1; + emac_start_link(ep, NULL); + + /* read the MAC Address */ + for (i = 0; i < 6; i++) + ndev->dev_addr[i] = emacdata->mac_addr[i]; + + /* Fill in the driver function table */ + ndev->open = &emac_open; + ndev->hard_start_xmit = &emac_start_xmit; + ndev->stop = &emac_close; + ndev->get_stats = &emac_stats; + if (emacdata->jumbo) + ndev->change_mtu = &emac_change_mtu; + ndev->set_mac_address = &emac_set_mac_address; + ndev->set_multicast_list = &emac_set_multicast_list; + ndev->do_ioctl = &emac_ioctl; + SET_ETHTOOL_OPS(ndev, &emac_ethtool_ops); + if (emacdata->tah_idx >= 0) + ndev->features = NETIF_F_IP_CSUM | NETIF_F_SG; +#ifdef CONFIG_NET_POLL_CONTROLLER + ndev->poll_controller = emac_netpoll; +#endif + + SET_MODULE_OWNER(ndev); + + rc = register_netdev(ndev); + if (rc != 0) + goto bail; + + printk("%s: IBM emac, MAC %02x:%02x:%02x:%02x:%02x:%02x\n", + ndev->name, + ndev->dev_addr[0], ndev->dev_addr[1], ndev->dev_addr[2], + ndev->dev_addr[3], ndev->dev_addr[4], ndev->dev_addr[5]); + printk(KERN_INFO "%s: Found %s PHY (0x%02x)\n", + ndev->name, ep->phy_mii.def->name, ep->mii_phy_addr); + + bail: + if (rc && commac_reg) + mal_unregister_commac(ep->mal, &ep->commac); + if (rc && ndev) + kfree(ndev); + + return rc; +} + +static int emac_probe(struct ocp_device *ocpdev) +{ + struct ocp_device *maldev; + struct ibm_ocp_mal *mal; + struct ocp_func_emac_data *emacdata; + + emacdata = (struct ocp_func_emac_data *)ocpdev->def->additions; + if (emacdata == NULL) { + printk(KERN_ERR "emac%d: Missing additional datas !\n", + ocpdev->def->index); + return -ENODEV; + } + + /* Get the MAL device */ + maldev = ocp_find_device(OCP_ANY_ID, OCP_FUNC_MAL, emacdata->mal_idx); + if (maldev == NULL) { + printk("No maldev\n"); + return -ENODEV; + } + /* + * Get MAL driver data, it must be here due to link order. + * When the driver is modularized, symbol dependencies will + * ensure the MAL driver is already present if built as a + * module. + */ + mal = (struct ibm_ocp_mal *)ocp_get_drvdata(maldev); + if (mal == NULL) { + printk("No maldrv\n"); + return -ENODEV; + } + + /* If we depend on another EMAC for MDIO, wait for it to show up */ + if (emacdata->mdio_idx >= 0 && + (emacdata->mdio_idx != ocpdev->def->index) && !mdio_ndev) { + struct emac_def_dev *ddev; + /* Add this index to the deferred init table */ + ddev = kmalloc(sizeof(struct emac_def_dev), GFP_KERNEL); + ddev->ocpdev = ocpdev; + ddev->mal = mal; + list_add_tail(&ddev->link, &emac_init_list); + } else { + emac_init_device(ocpdev, mal); + } + + return 0; +} + +/* Structure for a device driver */ +static struct ocp_device_id emac_ids[] = { + {.vendor = OCP_ANY_ID,.function = OCP_FUNC_EMAC}, + {.vendor = OCP_VENDOR_INVALID} +}; + +static struct ocp_driver emac_driver = { + .name = "emac", + .id_table = emac_ids, + + .probe = emac_probe, + .remove = emac_remove, +}; + +static int __init emac_init(void) +{ + printk(KERN_INFO DRV_NAME ": " DRV_DESC ", version " DRV_VERSION "\n"); + printk(KERN_INFO "Maintained by " DRV_AUTHOR "\n"); + + if (skb_res > 2) { + printk(KERN_WARNING "Invalid skb_res: %d, cropping to 2\n", + skb_res); + skb_res = 2; + } + + return ocp_register_driver(&emac_driver); +} + +static void __exit emac_exit(void) +{ + ocp_unregister_driver(&emac_driver); +} + +module_init(emac_init); +module_exit(emac_exit); diff --git a/drivers/net/ibm_emac/ibm_emac_core.h b/drivers/net/ibm_emac/ibm_emac_core.h new file mode 100644 index 000000000000..97e6e1ea8c89 --- /dev/null +++ b/drivers/net/ibm_emac/ibm_emac_core.h @@ -0,0 +1,146 @@ +/* + * ibm_emac_core.h + * + * Ethernet driver for the built in ethernet on the IBM 405 PowerPC + * processor. + * + * Armin Kuster akuster@mvista.com + * Sept, 2001 + * + * Orignial driver + * Johnnie Peters + * jpeters@mvista.com + * + * Copyright 2000 MontaVista Softare Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#ifndef _IBM_EMAC_CORE_H_ +#define _IBM_EMAC_CORE_H_ + +#include +#include +#include /* For phys_addr_t */ + +#include "ibm_emac.h" +#include "ibm_emac_phy.h" +#include "ibm_emac_rgmii.h" +#include "ibm_emac_zmii.h" +#include "ibm_emac_mal.h" +#include "ibm_emac_tah.h" + +#ifndef CONFIG_IBM_EMAC_TXB +#define NUM_TX_BUFF 64 +#define NUM_RX_BUFF 64 +#else +#define NUM_TX_BUFF CONFIG_IBM_EMAC_TXB +#define NUM_RX_BUFF CONFIG_IBM_EMAC_RXB +#endif + +/* This does 16 byte alignment, exactly what we need. + * The packet length includes FCS, but we don't want to + * include that when passing upstream as it messes up + * bridging applications. + */ +#ifndef CONFIG_IBM_EMAC_SKBRES +#define SKB_RES 2 +#else +#define SKB_RES CONFIG_IBM_EMAC_SKBRES +#endif + +/* Note about alignement. alloc_skb() returns a cache line + * aligned buffer. However, dev_alloc_skb() will add 16 more + * bytes and "reserve" them, so our buffer will actually end + * on a half cache line. What we do is to use directly + * alloc_skb, allocate 16 more bytes to match the total amount + * allocated by dev_alloc_skb(), but we don't reserve. + */ +#define MAX_NUM_BUF_DESC 255 +#define DESC_BUF_SIZE 4080 /* max 4096-16 */ +#define DESC_BUF_SIZE_REG (DESC_BUF_SIZE / 16) + +/* Transmitter timeout. */ +#define TX_TIMEOUT (2*HZ) + +/* MDIO latency delay */ +#define MDIO_DELAY 250 + +/* Power managment shift registers */ +#define IBM_CPM_EMMII 0 /* Shift value for MII */ +#define IBM_CPM_EMRX 1 /* Shift value for recv */ +#define IBM_CPM_EMTX 2 /* Shift value for MAC */ +#define IBM_CPM_EMAC(x) (((x)>>IBM_CPM_EMMII) | ((x)>>IBM_CPM_EMRX) | ((x)>>IBM_CPM_EMTX)) + +#define ENET_HEADER_SIZE 14 +#define ENET_FCS_SIZE 4 +#define ENET_DEF_MTU_SIZE 1500 +#define ENET_DEF_BUF_SIZE (ENET_DEF_MTU_SIZE + ENET_HEADER_SIZE + ENET_FCS_SIZE) +#define EMAC_MIN_FRAME 64 +#define EMAC_MAX_FRAME 9018 +#define EMAC_MIN_MTU (EMAC_MIN_FRAME - ENET_HEADER_SIZE - ENET_FCS_SIZE) +#define EMAC_MAX_MTU (EMAC_MAX_FRAME - ENET_HEADER_SIZE - ENET_FCS_SIZE) + +#ifdef CONFIG_IBM_EMAC_ERRMSG +void emac_serr_dump_0(struct net_device *dev); +void emac_serr_dump_1(struct net_device *dev); +void emac_err_dump(struct net_device *dev, int em0isr); +void emac_phy_dump(struct net_device *); +void emac_desc_dump(struct net_device *); +void emac_mac_dump(struct net_device *); +void emac_mal_dump(struct net_device *); +#else +#define emac_serr_dump_0(dev) do { } while (0) +#define emac_serr_dump_1(dev) do { } while (0) +#define emac_err_dump(dev,x) do { } while (0) +#define emac_phy_dump(dev) do { } while (0) +#define emac_desc_dump(dev) do { } while (0) +#define emac_mac_dump(dev) do { } while (0) +#define emac_mal_dump(dev) do { } while (0) +#endif + +struct ocp_enet_private { + struct sk_buff *tx_skb[NUM_TX_BUFF]; + struct sk_buff *rx_skb[NUM_RX_BUFF]; + struct mal_descriptor *tx_desc; + struct mal_descriptor *rx_desc; + struct mal_descriptor *rx_dirty; + struct net_device_stats stats; + int tx_cnt; + int rx_slot; + int dirty_rx; + int tx_slot; + int ack_slot; + int rx_buffer_size; + + struct mii_phy phy_mii; + int mii_phy_addr; + int want_autoneg; + int timer_ticks; + struct timer_list link_timer; + struct net_device *mdio_dev; + + struct ocp_device *rgmii_dev; + int rgmii_input; + + struct ocp_device *zmii_dev; + int zmii_input; + + struct ibm_ocp_mal *mal; + int mal_tx_chan, mal_rx_chan; + struct mal_commac commac; + + struct ocp_device *tah_dev; + + int opened; + int going_away; + int wol_irq; + emac_t *emacp; + struct ocp_device *ocpdev; + struct net_device *ndev; + spinlock_t lock; +}; +#endif /* _IBM_EMAC_CORE_H_ */ diff --git a/drivers/net/ibm_emac/ibm_emac_debug.c b/drivers/net/ibm_emac/ibm_emac_debug.c new file mode 100644 index 000000000000..c8512046cf84 --- /dev/null +++ b/drivers/net/ibm_emac/ibm_emac_debug.c @@ -0,0 +1,224 @@ +/* + * ibm_ocp_debug.c + * + * This has all the debug routines that where in *_enet.c + * + * Armin Kuster akuster@mvista.com + * April , 2002 + * + * Copyright 2002 MontaVista Softare Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include +#include +#include +#include +#include "ibm_ocp_mal.h" +#include "ibm_ocp_zmii.h" +#include "ibm_ocp_enet.h" + +extern int emac_phy_read(struct net_device *dev, int mii_id, int reg); + +void emac_phy_dump(struct net_device *dev) +{ + struct ocp_enet_private *fep = dev->priv; + unsigned long i; + uint data; + + printk(KERN_DEBUG " Prepare for Phy dump....\n"); + for (i = 0; i < 0x1A; i++) { + data = emac_phy_read(dev, fep->mii_phy_addr, i); + printk(KERN_DEBUG "Phy reg 0x%lx ==> %4x\n", i, data); + if (i == 0x07) + i = 0x0f; + } +} + +void emac_desc_dump(struct net_device *dev) +{ + struct ocp_enet_private *fep = dev->priv; + int curr_slot; + + printk(KERN_DEBUG + "dumping the receive descriptors: current slot is %d\n", + fep->rx_slot); + for (curr_slot = 0; curr_slot < NUM_RX_BUFF; curr_slot++) { + printk(KERN_DEBUG + "Desc %02d: status 0x%04x, length %3d, addr 0x%x\n", + curr_slot, fep->rx_desc[curr_slot].ctrl, + fep->rx_desc[curr_slot].data_len, + (unsigned int)fep->rx_desc[curr_slot].data_ptr); + } +} + +void emac_mac_dump(struct net_device *dev) +{ + struct ocp_enet_private *fep = dev->priv; + volatile emac_t *emacp = fep->emacp; + + printk(KERN_DEBUG "EMAC DEBUG ********** \n"); + printk(KERN_DEBUG "EMAC_M0 ==> 0x%x\n", in_be32(&emacp->em0mr0)); + printk(KERN_DEBUG "EMAC_M1 ==> 0x%x\n", in_be32(&emacp->em0mr1)); + printk(KERN_DEBUG "EMAC_TXM0==> 0x%x\n", in_be32(&emacp->em0tmr0)); + printk(KERN_DEBUG "EMAC_TXM1==> 0x%x\n", in_be32(&emacp->em0tmr1)); + printk(KERN_DEBUG "EMAC_RXM ==> 0x%x\n", in_be32(&emacp->em0rmr)); + printk(KERN_DEBUG "EMAC_ISR ==> 0x%x\n", in_be32(&emacp->em0isr)); + printk(KERN_DEBUG "EMAC_IER ==> 0x%x\n", in_be32(&emacp->em0iser)); + printk(KERN_DEBUG "EMAC_IAH ==> 0x%x\n", in_be32(&emacp->em0iahr)); + printk(KERN_DEBUG "EMAC_IAL ==> 0x%x\n", in_be32(&emacp->em0ialr)); + printk(KERN_DEBUG "EMAC_VLAN_TPID_REG ==> 0x%x\n", + in_be32(&emacp->em0vtpid)); +} + +void emac_mal_dump(struct net_device *dev) +{ + struct ibm_ocp_mal *mal = ((struct ocp_enet_private *)dev->priv)->mal; + + printk(KERN_DEBUG " MAL DEBUG ********** \n"); + printk(KERN_DEBUG " MCR ==> 0x%x\n", + (unsigned int)get_mal_dcrn(mal, DCRN_MALCR)); + printk(KERN_DEBUG " ESR ==> 0x%x\n", + (unsigned int)get_mal_dcrn(mal, DCRN_MALESR)); + printk(KERN_DEBUG " IER ==> 0x%x\n", + (unsigned int)get_mal_dcrn(mal, DCRN_MALIER)); +#ifdef CONFIG_40x + printk(KERN_DEBUG " DBR ==> 0x%x\n", + (unsigned int)get_mal_dcrn(mal, DCRN_MALDBR)); +#endif /* CONFIG_40x */ + printk(KERN_DEBUG " TXCASR ==> 0x%x\n", + (unsigned int)get_mal_dcrn(mal, DCRN_MALTXCASR)); + printk(KERN_DEBUG " TXCARR ==> 0x%x\n", + (unsigned int)get_mal_dcrn(mal, DCRN_MALTXCARR)); + printk(KERN_DEBUG " TXEOBISR ==> 0x%x\n", + (unsigned int)get_mal_dcrn(mal, DCRN_MALTXEOBISR)); + printk(KERN_DEBUG " TXDEIR ==> 0x%x\n", + (unsigned int)get_mal_dcrn(mal, DCRN_MALTXDEIR)); + printk(KERN_DEBUG " RXCASR ==> 0x%x\n", + (unsigned int)get_mal_dcrn(mal, DCRN_MALRXCASR)); + printk(KERN_DEBUG " RXCARR ==> 0x%x\n", + (unsigned int)get_mal_dcrn(mal, DCRN_MALRXCARR)); + printk(KERN_DEBUG " RXEOBISR ==> 0x%x\n", + (unsigned int)get_mal_dcrn(mal, DCRN_MALRXEOBISR)); + printk(KERN_DEBUG " RXDEIR ==> 0x%x\n", + (unsigned int)get_mal_dcrn(mal, DCRN_MALRXDEIR)); + printk(KERN_DEBUG " TXCTP0R ==> 0x%x\n", + (unsigned int)get_mal_dcrn(mal, DCRN_MALTXCTP0R)); + printk(KERN_DEBUG " TXCTP1R ==> 0x%x\n", + (unsigned int)get_mal_dcrn(mal, DCRN_MALTXCTP1R)); + printk(KERN_DEBUG " TXCTP2R ==> 0x%x\n", + (unsigned int)get_mal_dcrn(mal, DCRN_MALTXCTP2R)); + printk(KERN_DEBUG " TXCTP3R ==> 0x%x\n", + (unsigned int)get_mal_dcrn(mal, DCRN_MALTXCTP3R)); + printk(KERN_DEBUG " RXCTP0R ==> 0x%x\n", + (unsigned int)get_mal_dcrn(mal, DCRN_MALRXCTP0R)); + printk(KERN_DEBUG " RXCTP1R ==> 0x%x\n", + (unsigned int)get_mal_dcrn(mal, DCRN_MALRXCTP1R)); + printk(KERN_DEBUG " RCBS0 ==> 0x%x\n", + (unsigned int)get_mal_dcrn(mal, DCRN_MALRCBS0)); + printk(KERN_DEBUG " RCBS1 ==> 0x%x\n", + (unsigned int)get_mal_dcrn(mal, DCRN_MALRCBS1)); +} + +void emac_serr_dump_0(struct net_device *dev) +{ + struct ibm_ocp_mal *mal = ((struct ocp_enet_private *)dev->priv)->mal; + unsigned long int mal_error, plb_error, plb_addr; + + mal_error = get_mal_dcrn(mal, DCRN_MALESR); + printk(KERN_DEBUG "ppc405_eth_serr: %s channel %ld \n", + (mal_error & 0x40000000) ? "Receive" : + "Transmit", (mal_error & 0x3e000000) >> 25); + printk(KERN_DEBUG " ----- latched error -----\n"); + if (mal_error & MALESR_DE) + printk(KERN_DEBUG " DE: descriptor error\n"); + if (mal_error & MALESR_OEN) + printk(KERN_DEBUG " ONE: OPB non-fullword error\n"); + if (mal_error & MALESR_OTE) + printk(KERN_DEBUG " OTE: OPB timeout error\n"); + if (mal_error & MALESR_OSE) + printk(KERN_DEBUG " OSE: OPB slave error\n"); + + if (mal_error & MALESR_PEIN) { + plb_error = mfdcr(DCRN_PLB0_BESR); + printk(KERN_DEBUG + " PEIN: PLB error, PLB0_BESR is 0x%x\n", + (unsigned int)plb_error); + plb_addr = mfdcr(DCRN_PLB0_BEAR); + printk(KERN_DEBUG + " PEIN: PLB error, PLB0_BEAR is 0x%x\n", + (unsigned int)plb_addr); + } +} + +void emac_serr_dump_1(struct net_device *dev) +{ + struct ibm_ocp_mal *mal = ((struct ocp_enet_private *)dev->priv)->mal; + int mal_error = get_mal_dcrn(mal, DCRN_MALESR); + + printk(KERN_DEBUG " ----- cumulative errors -----\n"); + if (mal_error & MALESR_DEI) + printk(KERN_DEBUG " DEI: descriptor error interrupt\n"); + if (mal_error & MALESR_ONEI) + printk(KERN_DEBUG " OPB non-fullword error interrupt\n"); + if (mal_error & MALESR_OTEI) + printk(KERN_DEBUG " OTEI: timeout error interrupt\n"); + if (mal_error & MALESR_OSEI) + printk(KERN_DEBUG " OSEI: slave error interrupt\n"); + if (mal_error & MALESR_PBEI) + printk(KERN_DEBUG " PBEI: PLB bus error interrupt\n"); +} + +void emac_err_dump(struct net_device *dev, int em0isr) +{ + printk(KERN_DEBUG "%s: on-chip ethernet error:\n", dev->name); + + if (em0isr & EMAC_ISR_OVR) + printk(KERN_DEBUG " OVR: overrun\n"); + if (em0isr & EMAC_ISR_PP) + printk(KERN_DEBUG " PP: control pause packet\n"); + if (em0isr & EMAC_ISR_BP) + printk(KERN_DEBUG " BP: packet error\n"); + if (em0isr & EMAC_ISR_RP) + printk(KERN_DEBUG " RP: runt packet\n"); + if (em0isr & EMAC_ISR_SE) + printk(KERN_DEBUG " SE: short event\n"); + if (em0isr & EMAC_ISR_ALE) + printk(KERN_DEBUG " ALE: odd number of nibbles in packet\n"); + if (em0isr & EMAC_ISR_BFCS) + printk(KERN_DEBUG " BFCS: bad FCS\n"); + if (em0isr & EMAC_ISR_PTLE) + printk(KERN_DEBUG " PTLE: oversized packet\n"); + if (em0isr & EMAC_ISR_ORE) + printk(KERN_DEBUG + " ORE: packet length field > max allowed LLC\n"); + if (em0isr & EMAC_ISR_IRE) + printk(KERN_DEBUG " IRE: In Range error\n"); + if (em0isr & EMAC_ISR_DBDM) + printk(KERN_DEBUG " DBDM: xmit error or SQE\n"); + if (em0isr & EMAC_ISR_DB0) + printk(KERN_DEBUG " DB0: xmit error or SQE on TX channel 0\n"); + if (em0isr & EMAC_ISR_SE0) + printk(KERN_DEBUG + " SE0: Signal Quality Error test failure from TX channel 0\n"); + if (em0isr & EMAC_ISR_TE0) + printk(KERN_DEBUG " TE0: xmit channel 0 aborted\n"); + if (em0isr & EMAC_ISR_DB1) + printk(KERN_DEBUG " DB1: xmit error or SQE on TX channel \n"); + if (em0isr & EMAC_ISR_SE1) + printk(KERN_DEBUG + " SE1: Signal Quality Error test failure from TX channel 1\n"); + if (em0isr & EMAC_ISR_TE1) + printk(KERN_DEBUG " TE1: xmit channel 1 aborted\n"); + if (em0isr & EMAC_ISR_MOS) + printk(KERN_DEBUG " MOS\n"); + if (em0isr & EMAC_ISR_MOF) + printk(KERN_DEBUG " MOF\n"); + + emac_mac_dump(dev); + emac_mal_dump(dev); +} diff --git a/drivers/net/ibm_emac/ibm_emac_mal.c b/drivers/net/ibm_emac/ibm_emac_mal.c new file mode 100644 index 000000000000..e59f57f363ca --- /dev/null +++ b/drivers/net/ibm_emac/ibm_emac_mal.c @@ -0,0 +1,463 @@ +/* + * ibm_ocp_mal.c + * + * Armin Kuster akuster@mvista.com + * Juen, 2002 + * + * Copyright 2002 MontaVista Softare Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +#include "ibm_emac_mal.h" + +// Locking: Should we share a lock with the client ? The client could provide +// a lock pointer (optionally) in the commac structure... I don't think this is +// really necessary though + +/* This lock protects the commac list. On today UP implementations, it's + * really only used as IRQ protection in mal_{register,unregister}_commac() + */ +static DEFINE_RWLOCK(mal_list_lock); + +int mal_register_commac(struct ibm_ocp_mal *mal, struct mal_commac *commac) +{ + unsigned long flags; + + write_lock_irqsave(&mal_list_lock, flags); + + /* Don't let multiple commacs claim the same channel */ + if ((mal->tx_chan_mask & commac->tx_chan_mask) || + (mal->rx_chan_mask & commac->rx_chan_mask)) { + write_unlock_irqrestore(&mal_list_lock, flags); + return -EBUSY; + } + + mal->tx_chan_mask |= commac->tx_chan_mask; + mal->rx_chan_mask |= commac->rx_chan_mask; + + list_add(&commac->list, &mal->commac); + + write_unlock_irqrestore(&mal_list_lock, flags); + + return 0; +} + +int mal_unregister_commac(struct ibm_ocp_mal *mal, struct mal_commac *commac) +{ + unsigned long flags; + + write_lock_irqsave(&mal_list_lock, flags); + + mal->tx_chan_mask &= ~commac->tx_chan_mask; + mal->rx_chan_mask &= ~commac->rx_chan_mask; + + list_del_init(&commac->list); + + write_unlock_irqrestore(&mal_list_lock, flags); + + return 0; +} + +int mal_set_rcbs(struct ibm_ocp_mal *mal, int channel, unsigned long size) +{ + switch (channel) { + case 0: + set_mal_dcrn(mal, DCRN_MALRCBS0, size); + break; +#ifdef DCRN_MALRCBS1 + case 1: + set_mal_dcrn(mal, DCRN_MALRCBS1, size); + break; +#endif +#ifdef DCRN_MALRCBS2 + case 2: + set_mal_dcrn(mal, DCRN_MALRCBS2, size); + break; +#endif +#ifdef DCRN_MALRCBS3 + case 3: + set_mal_dcrn(mal, DCRN_MALRCBS3, size); + break; +#endif + default: + return -EINVAL; + } + + return 0; +} + +static irqreturn_t mal_serr(int irq, void *dev_instance, struct pt_regs *regs) +{ + struct ibm_ocp_mal *mal = dev_instance; + unsigned long mal_error; + + /* + * This SERR applies to one of the devices on the MAL, here we charge + * it against the first EMAC registered for the MAL. + */ + + mal_error = get_mal_dcrn(mal, DCRN_MALESR); + + printk(KERN_ERR "%s: System Error (MALESR=%lx)\n", + "MAL" /* FIXME: get the name right */ , mal_error); + + /* FIXME: decipher error */ + /* DIXME: distribute to commacs, if possible */ + + /* Clear the error status register */ + set_mal_dcrn(mal, DCRN_MALESR, mal_error); + + return IRQ_HANDLED; +} + +static irqreturn_t mal_txeob(int irq, void *dev_instance, struct pt_regs *regs) +{ + struct ibm_ocp_mal *mal = dev_instance; + struct list_head *l; + unsigned long isr; + + isr = get_mal_dcrn(mal, DCRN_MALTXEOBISR); + set_mal_dcrn(mal, DCRN_MALTXEOBISR, isr); + + read_lock(&mal_list_lock); + list_for_each(l, &mal->commac) { + struct mal_commac *mc = list_entry(l, struct mal_commac, list); + + if (isr & mc->tx_chan_mask) { + mc->ops->txeob(mc->dev, isr & mc->tx_chan_mask); + } + } + read_unlock(&mal_list_lock); + + return IRQ_HANDLED; +} + +static irqreturn_t mal_rxeob(int irq, void *dev_instance, struct pt_regs *regs) +{ + struct ibm_ocp_mal *mal = dev_instance; + struct list_head *l; + unsigned long isr; + + isr = get_mal_dcrn(mal, DCRN_MALRXEOBISR); + set_mal_dcrn(mal, DCRN_MALRXEOBISR, isr); + + read_lock(&mal_list_lock); + list_for_each(l, &mal->commac) { + struct mal_commac *mc = list_entry(l, struct mal_commac, list); + + if (isr & mc->rx_chan_mask) { + mc->ops->rxeob(mc->dev, isr & mc->rx_chan_mask); + } + } + read_unlock(&mal_list_lock); + + return IRQ_HANDLED; +} + +static irqreturn_t mal_txde(int irq, void *dev_instance, struct pt_regs *regs) +{ + struct ibm_ocp_mal *mal = dev_instance; + struct list_head *l; + unsigned long deir; + + deir = get_mal_dcrn(mal, DCRN_MALTXDEIR); + + /* FIXME: print which MAL correctly */ + printk(KERN_WARNING "%s: Tx descriptor error (MALTXDEIR=%lx)\n", + "MAL", deir); + + read_lock(&mal_list_lock); + list_for_each(l, &mal->commac) { + struct mal_commac *mc = list_entry(l, struct mal_commac, list); + + if (deir & mc->tx_chan_mask) { + mc->ops->txde(mc->dev, deir & mc->tx_chan_mask); + } + } + read_unlock(&mal_list_lock); + + return IRQ_HANDLED; +} + +/* + * This interrupt should be very rare at best. This occurs when + * the hardware has a problem with the receive descriptors. The manual + * states that it occurs when the hardware cannot the receive descriptor + * empty bit is not set. The recovery mechanism will be to + * traverse through the descriptors, handle any that are marked to be + * handled and reinitialize each along the way. At that point the driver + * will be restarted. + */ +static irqreturn_t mal_rxde(int irq, void *dev_instance, struct pt_regs *regs) +{ + struct ibm_ocp_mal *mal = dev_instance; + struct list_head *l; + unsigned long deir; + + deir = get_mal_dcrn(mal, DCRN_MALRXDEIR); + + /* + * This really is needed. This case encountered in stress testing. + */ + if (deir == 0) + return IRQ_HANDLED; + + /* FIXME: print which MAL correctly */ + printk(KERN_WARNING "%s: Rx descriptor error (MALRXDEIR=%lx)\n", + "MAL", deir); + + read_lock(&mal_list_lock); + list_for_each(l, &mal->commac) { + struct mal_commac *mc = list_entry(l, struct mal_commac, list); + + if (deir & mc->rx_chan_mask) { + mc->ops->rxde(mc->dev, deir & mc->rx_chan_mask); + } + } + read_unlock(&mal_list_lock); + + return IRQ_HANDLED; +} + +static int __init mal_probe(struct ocp_device *ocpdev) +{ + struct ibm_ocp_mal *mal = NULL; + struct ocp_func_mal_data *maldata; + int err = 0; + + maldata = (struct ocp_func_mal_data *)ocpdev->def->additions; + if (maldata == NULL) { + printk(KERN_ERR "mal%d: Missing additional datas !\n", + ocpdev->def->index); + return -ENODEV; + } + + mal = kmalloc(sizeof(struct ibm_ocp_mal), GFP_KERNEL); + if (mal == NULL) { + printk(KERN_ERR + "mal%d: Out of memory allocating MAL structure !\n", + ocpdev->def->index); + return -ENOMEM; + } + memset(mal, 0, sizeof(*mal)); + + switch (ocpdev->def->index) { + case 0: + mal->dcrbase = DCRN_MAL_BASE; + break; +#ifdef DCRN_MAL1_BASE + case 1: + mal->dcrbase = DCRN_MAL1_BASE; + break; +#endif + default: + BUG(); + } + + /**************************/ + + INIT_LIST_HEAD(&mal->commac); + + set_mal_dcrn(mal, DCRN_MALRXCARR, 0xFFFFFFFF); + set_mal_dcrn(mal, DCRN_MALTXCARR, 0xFFFFFFFF); + + set_mal_dcrn(mal, DCRN_MALCR, MALCR_MMSR); /* 384 */ + /* FIXME: Add delay */ + + /* Set the MAL configuration register */ + set_mal_dcrn(mal, DCRN_MALCR, + MALCR_PLBB | MALCR_OPBBL | MALCR_LEA | + MALCR_PLBLT_DEFAULT); + + /* It would be nice to allocate buffers separately for each + * channel, but we can't because the channels share the upper + * 13 bits of address lines. Each channels buffer must also + * be 4k aligned, so we allocate 4k for each channel. This is + * inefficient FIXME: do better, if possible */ + mal->tx_virt_addr = dma_alloc_coherent(&ocpdev->dev, + MAL_DT_ALIGN * + maldata->num_tx_chans, + &mal->tx_phys_addr, GFP_KERNEL); + if (mal->tx_virt_addr == NULL) { + printk(KERN_ERR + "mal%d: Out of memory allocating MAL descriptors !\n", + ocpdev->def->index); + err = -ENOMEM; + goto fail; + } + + /* God, oh, god, I hate DCRs */ + set_mal_dcrn(mal, DCRN_MALTXCTP0R, mal->tx_phys_addr); +#ifdef DCRN_MALTXCTP1R + if (maldata->num_tx_chans > 1) + set_mal_dcrn(mal, DCRN_MALTXCTP1R, + mal->tx_phys_addr + MAL_DT_ALIGN); +#endif /* DCRN_MALTXCTP1R */ +#ifdef DCRN_MALTXCTP2R + if (maldata->num_tx_chans > 2) + set_mal_dcrn(mal, DCRN_MALTXCTP2R, + mal->tx_phys_addr + 2 * MAL_DT_ALIGN); +#endif /* DCRN_MALTXCTP2R */ +#ifdef DCRN_MALTXCTP3R + if (maldata->num_tx_chans > 3) + set_mal_dcrn(mal, DCRN_MALTXCTP3R, + mal->tx_phys_addr + 3 * MAL_DT_ALIGN); +#endif /* DCRN_MALTXCTP3R */ +#ifdef DCRN_MALTXCTP4R + if (maldata->num_tx_chans > 4) + set_mal_dcrn(mal, DCRN_MALTXCTP4R, + mal->tx_phys_addr + 4 * MAL_DT_ALIGN); +#endif /* DCRN_MALTXCTP4R */ +#ifdef DCRN_MALTXCTP5R + if (maldata->num_tx_chans > 5) + set_mal_dcrn(mal, DCRN_MALTXCTP5R, + mal->tx_phys_addr + 5 * MAL_DT_ALIGN); +#endif /* DCRN_MALTXCTP5R */ +#ifdef DCRN_MALTXCTP6R + if (maldata->num_tx_chans > 6) + set_mal_dcrn(mal, DCRN_MALTXCTP6R, + mal->tx_phys_addr + 6 * MAL_DT_ALIGN); +#endif /* DCRN_MALTXCTP6R */ +#ifdef DCRN_MALTXCTP7R + if (maldata->num_tx_chans > 7) + set_mal_dcrn(mal, DCRN_MALTXCTP7R, + mal->tx_phys_addr + 7 * MAL_DT_ALIGN); +#endif /* DCRN_MALTXCTP7R */ + + mal->rx_virt_addr = dma_alloc_coherent(&ocpdev->dev, + MAL_DT_ALIGN * + maldata->num_rx_chans, + &mal->rx_phys_addr, GFP_KERNEL); + + set_mal_dcrn(mal, DCRN_MALRXCTP0R, mal->rx_phys_addr); +#ifdef DCRN_MALRXCTP1R + if (maldata->num_rx_chans > 1) + set_mal_dcrn(mal, DCRN_MALRXCTP1R, + mal->rx_phys_addr + MAL_DT_ALIGN); +#endif /* DCRN_MALRXCTP1R */ +#ifdef DCRN_MALRXCTP2R + if (maldata->num_rx_chans > 2) + set_mal_dcrn(mal, DCRN_MALRXCTP2R, + mal->rx_phys_addr + 2 * MAL_DT_ALIGN); +#endif /* DCRN_MALRXCTP2R */ +#ifdef DCRN_MALRXCTP3R + if (maldata->num_rx_chans > 3) + set_mal_dcrn(mal, DCRN_MALRXCTP3R, + mal->rx_phys_addr + 3 * MAL_DT_ALIGN); +#endif /* DCRN_MALRXCTP3R */ + + err = request_irq(maldata->serr_irq, mal_serr, 0, "MAL SERR", mal); + if (err) + goto fail; + err = request_irq(maldata->txde_irq, mal_txde, 0, "MAL TX DE ", mal); + if (err) + goto fail; + err = request_irq(maldata->txeob_irq, mal_txeob, 0, "MAL TX EOB", mal); + if (err) + goto fail; + err = request_irq(maldata->rxde_irq, mal_rxde, 0, "MAL RX DE", mal); + if (err) + goto fail; + err = request_irq(maldata->rxeob_irq, mal_rxeob, 0, "MAL RX EOB", mal); + if (err) + goto fail; + + set_mal_dcrn(mal, DCRN_MALIER, + MALIER_DE | MALIER_NE | MALIER_TE | + MALIER_OPBE | MALIER_PLBE); + + /* Advertise me to the rest of the world */ + ocp_set_drvdata(ocpdev, mal); + + printk(KERN_INFO "mal%d: Initialized, %d tx channels, %d rx channels\n", + ocpdev->def->index, maldata->num_tx_chans, + maldata->num_rx_chans); + + return 0; + + fail: + /* FIXME: dispose requested IRQs ! */ + if (err && mal) + kfree(mal); + return err; +} + +static void __exit mal_remove(struct ocp_device *ocpdev) +{ + struct ibm_ocp_mal *mal = ocp_get_drvdata(ocpdev); + struct ocp_func_mal_data *maldata = ocpdev->def->additions; + + BUG_ON(!maldata); + + ocp_set_drvdata(ocpdev, NULL); + + /* FIXME: shut down the MAL, deal with dependency with emac */ + free_irq(maldata->serr_irq, mal); + free_irq(maldata->txde_irq, mal); + free_irq(maldata->txeob_irq, mal); + free_irq(maldata->rxde_irq, mal); + free_irq(maldata->rxeob_irq, mal); + + if (mal->tx_virt_addr) + dma_free_coherent(&ocpdev->dev, + MAL_DT_ALIGN * maldata->num_tx_chans, + mal->tx_virt_addr, mal->tx_phys_addr); + + if (mal->rx_virt_addr) + dma_free_coherent(&ocpdev->dev, + MAL_DT_ALIGN * maldata->num_rx_chans, + mal->rx_virt_addr, mal->rx_phys_addr); + + kfree(mal); +} + +/* Structure for a device driver */ +static struct ocp_device_id mal_ids[] = { + {.vendor = OCP_ANY_ID,.function = OCP_FUNC_MAL}, + {.vendor = OCP_VENDOR_INVALID} +}; + +static struct ocp_driver mal_driver = { + .name = "mal", + .id_table = mal_ids, + + .probe = mal_probe, + .remove = mal_remove, +}; + +static int __init init_mals(void) +{ + int rc; + + rc = ocp_register_driver(&mal_driver); + if (rc < 0) { + ocp_unregister_driver(&mal_driver); + return -ENODEV; + } + + return 0; +} + +static void __exit exit_mals(void) +{ + ocp_unregister_driver(&mal_driver); +} + +module_init(init_mals); +module_exit(exit_mals); diff --git a/drivers/net/ibm_emac/ibm_emac_mal.h b/drivers/net/ibm_emac/ibm_emac_mal.h new file mode 100644 index 000000000000..dd9f0dabc6e0 --- /dev/null +++ b/drivers/net/ibm_emac/ibm_emac_mal.h @@ -0,0 +1,131 @@ +#ifndef _IBM_EMAC_MAL_H +#define _IBM_EMAC_MAL_H + +#include + +#define MAL_DT_ALIGN (4096) /* Alignment for each channel's descriptor table */ + +#define MAL_CHAN_MASK(chan) (0x80000000 >> (chan)) + +/* MAL Buffer Descriptor structure */ +struct mal_descriptor { + unsigned short ctrl; /* MAL / Commac status control bits */ + short data_len; /* Max length is 4K-1 (12 bits) */ + unsigned char *data_ptr; /* pointer to actual data buffer */ +} __attribute__ ((packed)); + +/* the following defines are for the MadMAL status and control registers. */ +/* MADMAL transmit and receive status/control bits */ +#define MAL_RX_CTRL_EMPTY 0x8000 +#define MAL_RX_CTRL_WRAP 0x4000 +#define MAL_RX_CTRL_CM 0x2000 +#define MAL_RX_CTRL_LAST 0x1000 +#define MAL_RX_CTRL_FIRST 0x0800 +#define MAL_RX_CTRL_INTR 0x0400 + +#define MAL_TX_CTRL_READY 0x8000 +#define MAL_TX_CTRL_WRAP 0x4000 +#define MAL_TX_CTRL_CM 0x2000 +#define MAL_TX_CTRL_LAST 0x1000 +#define MAL_TX_CTRL_INTR 0x0400 + +struct mal_commac_ops { + void (*txeob) (void *dev, u32 chanmask); + void (*txde) (void *dev, u32 chanmask); + void (*rxeob) (void *dev, u32 chanmask); + void (*rxde) (void *dev, u32 chanmask); +}; + +struct mal_commac { + struct mal_commac_ops *ops; + void *dev; + u32 tx_chan_mask, rx_chan_mask; + struct list_head list; +}; + +struct ibm_ocp_mal { + int dcrbase; + + struct list_head commac; + u32 tx_chan_mask, rx_chan_mask; + + dma_addr_t tx_phys_addr; + struct mal_descriptor *tx_virt_addr; + + dma_addr_t rx_phys_addr; + struct mal_descriptor *rx_virt_addr; +}; + +#define GET_MAL_STANZA(base,dcrn) \ + case base: \ + x = mfdcr(dcrn(base)); \ + break; + +#define SET_MAL_STANZA(base,dcrn, val) \ + case base: \ + mtdcr(dcrn(base), (val)); \ + break; + +#define GET_MAL0_STANZA(dcrn) GET_MAL_STANZA(DCRN_MAL_BASE,dcrn) +#define SET_MAL0_STANZA(dcrn,val) SET_MAL_STANZA(DCRN_MAL_BASE,dcrn,val) + +#ifdef DCRN_MAL1_BASE +#define GET_MAL1_STANZA(dcrn) GET_MAL_STANZA(DCRN_MAL1_BASE,dcrn) +#define SET_MAL1_STANZA(dcrn,val) SET_MAL_STANZA(DCRN_MAL1_BASE,dcrn,val) +#else /* ! DCRN_MAL1_BASE */ +#define GET_MAL1_STANZA(dcrn) +#define SET_MAL1_STANZA(dcrn,val) +#endif + +#define get_mal_dcrn(mal, dcrn) ({ \ + u32 x; \ + switch ((mal)->dcrbase) { \ + GET_MAL0_STANZA(dcrn) \ + GET_MAL1_STANZA(dcrn) \ + default: \ + x = 0; \ + BUG(); \ + } \ +x; }) + +#define set_mal_dcrn(mal, dcrn, val) do { \ + switch ((mal)->dcrbase) { \ + SET_MAL0_STANZA(dcrn,val) \ + SET_MAL1_STANZA(dcrn,val) \ + default: \ + BUG(); \ + } } while (0) + +static inline void mal_enable_tx_channels(struct ibm_ocp_mal *mal, u32 chanmask) +{ + set_mal_dcrn(mal, DCRN_MALTXCASR, + get_mal_dcrn(mal, DCRN_MALTXCASR) | chanmask); +} + +static inline void mal_disable_tx_channels(struct ibm_ocp_mal *mal, + u32 chanmask) +{ + set_mal_dcrn(mal, DCRN_MALTXCARR, chanmask); +} + +static inline void mal_enable_rx_channels(struct ibm_ocp_mal *mal, u32 chanmask) +{ + set_mal_dcrn(mal, DCRN_MALRXCASR, + get_mal_dcrn(mal, DCRN_MALRXCASR) | chanmask); +} + +static inline void mal_disable_rx_channels(struct ibm_ocp_mal *mal, + u32 chanmask) +{ + set_mal_dcrn(mal, DCRN_MALRXCARR, chanmask); +} + +extern int mal_register_commac(struct ibm_ocp_mal *mal, + struct mal_commac *commac); +extern int mal_unregister_commac(struct ibm_ocp_mal *mal, + struct mal_commac *commac); + +extern int mal_set_rcbs(struct ibm_ocp_mal *mal, int channel, + unsigned long size); + +#endif /* _IBM_EMAC_MAL_H */ diff --git a/drivers/net/ibm_emac/ibm_emac_phy.c b/drivers/net/ibm_emac/ibm_emac_phy.c new file mode 100644 index 000000000000..14213f090e91 --- /dev/null +++ b/drivers/net/ibm_emac/ibm_emac_phy.c @@ -0,0 +1,298 @@ +/* + * ibm_ocp_phy.c + * + * PHY drivers for the ibm ocp ethernet driver. Borrowed + * from sungem_phy.c, though I only kept the generic MII + * driver for now. + * + * This file should be shared with other drivers or eventually + * merged as the "low level" part of miilib + * + * (c) 2003, Benjamin Herrenscmidt (benh@kernel.crashing.org) + * + */ + +#include + +#include + +#include +#include +#include +#include +#include +#include +#include +#include + +#include "ibm_emac_phy.h" + +static int reset_one_mii_phy(struct mii_phy *phy, int phy_id) +{ + u16 val; + int limit = 10000; + + val = __phy_read(phy, phy_id, MII_BMCR); + val &= ~BMCR_ISOLATE; + val |= BMCR_RESET; + __phy_write(phy, phy_id, MII_BMCR, val); + + udelay(100); + + while (limit--) { + val = __phy_read(phy, phy_id, MII_BMCR); + if ((val & BMCR_RESET) == 0) + break; + udelay(10); + } + if ((val & BMCR_ISOLATE) && limit > 0) + __phy_write(phy, phy_id, MII_BMCR, val & ~BMCR_ISOLATE); + + return (limit <= 0); +} + +static int cis8201_init(struct mii_phy *phy) +{ + u16 epcr; + + epcr = phy_read(phy, MII_CIS8201_EPCR); + epcr &= ~EPCR_MODE_MASK; + + switch (phy->mode) { + case PHY_MODE_TBI: + epcr |= EPCR_TBI_MODE; + break; + case PHY_MODE_RTBI: + epcr |= EPCR_RTBI_MODE; + break; + case PHY_MODE_GMII: + epcr |= EPCR_GMII_MODE; + break; + case PHY_MODE_RGMII: + default: + epcr |= EPCR_RGMII_MODE; + } + + phy_write(phy, MII_CIS8201_EPCR, epcr); + + return 0; +} + +static int genmii_setup_aneg(struct mii_phy *phy, u32 advertise) +{ + u16 ctl, adv; + + phy->autoneg = 1; + phy->speed = SPEED_10; + phy->duplex = DUPLEX_HALF; + phy->pause = 0; + phy->advertising = advertise; + + /* Setup standard advertise */ + adv = phy_read(phy, MII_ADVERTISE); + adv &= ~(ADVERTISE_ALL | ADVERTISE_100BASE4); + if (advertise & ADVERTISED_10baseT_Half) + adv |= ADVERTISE_10HALF; + if (advertise & ADVERTISED_10baseT_Full) + adv |= ADVERTISE_10FULL; + if (advertise & ADVERTISED_100baseT_Half) + adv |= ADVERTISE_100HALF; + if (advertise & ADVERTISED_100baseT_Full) + adv |= ADVERTISE_100FULL; + phy_write(phy, MII_ADVERTISE, adv); + + /* Start/Restart aneg */ + ctl = phy_read(phy, MII_BMCR); + ctl |= (BMCR_ANENABLE | BMCR_ANRESTART); + phy_write(phy, MII_BMCR, ctl); + + return 0; +} + +static int genmii_setup_forced(struct mii_phy *phy, int speed, int fd) +{ + u16 ctl; + + phy->autoneg = 0; + phy->speed = speed; + phy->duplex = fd; + phy->pause = 0; + + ctl = phy_read(phy, MII_BMCR); + ctl &= ~(BMCR_FULLDPLX | BMCR_SPEED100 | BMCR_ANENABLE); + + /* First reset the PHY */ + phy_write(phy, MII_BMCR, ctl | BMCR_RESET); + + /* Select speed & duplex */ + switch (speed) { + case SPEED_10: + break; + case SPEED_100: + ctl |= BMCR_SPEED100; + break; + case SPEED_1000: + default: + return -EINVAL; + } + if (fd == DUPLEX_FULL) + ctl |= BMCR_FULLDPLX; + phy_write(phy, MII_BMCR, ctl); + + return 0; +} + +static int genmii_poll_link(struct mii_phy *phy) +{ + u16 status; + + (void)phy_read(phy, MII_BMSR); + status = phy_read(phy, MII_BMSR); + if ((status & BMSR_LSTATUS) == 0) + return 0; + if (phy->autoneg && !(status & BMSR_ANEGCOMPLETE)) + return 0; + return 1; +} + +#define MII_CIS8201_ACSR 0x1c +#define ACSR_DUPLEX_STATUS 0x0020 +#define ACSR_SPEED_1000BASET 0x0010 +#define ACSR_SPEED_100BASET 0x0008 + +static int cis8201_read_link(struct mii_phy *phy) +{ + u16 acsr; + + if (phy->autoneg) { + acsr = phy_read(phy, MII_CIS8201_ACSR); + + if (acsr & ACSR_DUPLEX_STATUS) + phy->duplex = DUPLEX_FULL; + else + phy->duplex = DUPLEX_HALF; + if (acsr & ACSR_SPEED_1000BASET) { + phy->speed = SPEED_1000; + } else if (acsr & ACSR_SPEED_100BASET) + phy->speed = SPEED_100; + else + phy->speed = SPEED_10; + phy->pause = 0; + } + /* On non-aneg, we assume what we put in BMCR is the speed, + * though magic-aneg shouldn't prevent this case from occurring + */ + + return 0; +} + +static int genmii_read_link(struct mii_phy *phy) +{ + u16 lpa; + + if (phy->autoneg) { + lpa = phy_read(phy, MII_LPA) & phy_read(phy, MII_ADVERTISE); + + phy->speed = SPEED_10; + phy->duplex = DUPLEX_HALF; + phy->pause = 0; + + if (lpa & (LPA_100FULL | LPA_100HALF)) { + phy->speed = SPEED_100; + if (lpa & LPA_100FULL) + phy->duplex = DUPLEX_FULL; + } else if (lpa & LPA_10FULL) + phy->duplex = DUPLEX_FULL; + } + /* On non-aneg, we assume what we put in BMCR is the speed, + * though magic-aneg shouldn't prevent this case from occurring + */ + + return 0; +} + +#define MII_BASIC_FEATURES (SUPPORTED_10baseT_Half | SUPPORTED_10baseT_Full | \ + SUPPORTED_100baseT_Half | SUPPORTED_100baseT_Full | \ + SUPPORTED_Autoneg | SUPPORTED_TP | SUPPORTED_MII) +#define MII_GBIT_FEATURES (MII_BASIC_FEATURES | \ + SUPPORTED_1000baseT_Half | SUPPORTED_1000baseT_Full) + +/* CIS8201 phy ops */ +static struct mii_phy_ops cis8201_phy_ops = { + init:cis8201_init, + setup_aneg:genmii_setup_aneg, + setup_forced:genmii_setup_forced, + poll_link:genmii_poll_link, + read_link:cis8201_read_link +}; + +/* Generic implementation for most 10/100 PHYs */ +static struct mii_phy_ops generic_phy_ops = { + setup_aneg:genmii_setup_aneg, + setup_forced:genmii_setup_forced, + poll_link:genmii_poll_link, + read_link:genmii_read_link +}; + +static struct mii_phy_def cis8201_phy_def = { + phy_id:0x000fc410, + phy_id_mask:0x000ffff0, + name:"CIS8201 Gigabit Ethernet", + features:MII_GBIT_FEATURES, + magic_aneg:0, + ops:&cis8201_phy_ops +}; + +static struct mii_phy_def genmii_phy_def = { + phy_id:0x00000000, + phy_id_mask:0x00000000, + name:"Generic MII", + features:MII_BASIC_FEATURES, + magic_aneg:0, + ops:&generic_phy_ops +}; + +static struct mii_phy_def *mii_phy_table[] = { + &cis8201_phy_def, + &genmii_phy_def, + NULL +}; + +int mii_phy_probe(struct mii_phy *phy, int mii_id) +{ + int rc; + u32 id; + struct mii_phy_def *def; + int i; + + phy->autoneg = 0; + phy->advertising = 0; + phy->mii_id = mii_id; + phy->speed = 0; + phy->duplex = 0; + phy->pause = 0; + + /* Take PHY out of isloate mode and reset it. */ + rc = reset_one_mii_phy(phy, mii_id); + if (rc) + return -ENODEV; + + /* Read ID and find matching entry */ + id = (phy_read(phy, MII_PHYSID1) << 16 | phy_read(phy, MII_PHYSID2)) + & 0xfffffff0; + for (i = 0; (def = mii_phy_table[i]) != NULL; i++) + if ((id & def->phy_id_mask) == def->phy_id) + break; + /* Should never be NULL (we have a generic entry), but... */ + if (def == NULL) + return -ENODEV; + + phy->def = def; + + /* Setup default advertising */ + phy->advertising = def->features; + + return 0; +} + +MODULE_LICENSE("GPL"); diff --git a/drivers/net/ibm_emac/ibm_emac_phy.h b/drivers/net/ibm_emac/ibm_emac_phy.h new file mode 100644 index 000000000000..61afbea96563 --- /dev/null +++ b/drivers/net/ibm_emac/ibm_emac_phy.h @@ -0,0 +1,137 @@ + +/* + * ibm_emac_phy.h + * + * + * Benjamin Herrenschmidt + * February 2003 + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + * + * + * This file basically duplicates sungem_phy.{c,h} with different PHYs + * supported. I'm looking into merging that in a single mii layer more + * flexible than mii.c + */ + +#ifndef _IBM_EMAC_PHY_H_ +#define _IBM_EMAC_PHY_H_ + +/* + * PHY mode settings + * Used for multi-mode capable PHYs + */ +#define PHY_MODE_NA 0 +#define PHY_MODE_MII 1 +#define PHY_MODE_RMII 2 +#define PHY_MODE_SMII 3 +#define PHY_MODE_RGMII 4 +#define PHY_MODE_TBI 5 +#define PHY_MODE_GMII 6 +#define PHY_MODE_RTBI 7 +#define PHY_MODE_SGMII 8 + +/* + * PHY specific registers/values + */ + +/* CIS8201 */ +#define MII_CIS8201_EPCR 0x17 +#define EPCR_MODE_MASK 0x3000 +#define EPCR_GMII_MODE 0x0000 +#define EPCR_RGMII_MODE 0x1000 +#define EPCR_TBI_MODE 0x2000 +#define EPCR_RTBI_MODE 0x3000 + +struct mii_phy; + +/* Operations supported by any kind of PHY */ +struct mii_phy_ops { + int (*init) (struct mii_phy * phy); + int (*suspend) (struct mii_phy * phy, int wol_options); + int (*setup_aneg) (struct mii_phy * phy, u32 advertise); + int (*setup_forced) (struct mii_phy * phy, int speed, int fd); + int (*poll_link) (struct mii_phy * phy); + int (*read_link) (struct mii_phy * phy); +}; + +/* Structure used to statically define an mii/gii based PHY */ +struct mii_phy_def { + u32 phy_id; /* Concatenated ID1 << 16 | ID2 */ + u32 phy_id_mask; /* Significant bits */ + u32 features; /* Ethtool SUPPORTED_* defines */ + int magic_aneg; /* Autoneg does all speed test for us */ + const char *name; + const struct mii_phy_ops *ops; +}; + +/* An instance of a PHY, partially borrowed from mii_if_info */ +struct mii_phy { + struct mii_phy_def *def; + int advertising; + int mii_id; + + /* 1: autoneg enabled, 0: disabled */ + int autoneg; + + /* forced speed & duplex (no autoneg) + * partner speed & duplex & pause (autoneg) + */ + int speed; + int duplex; + int pause; + + /* PHY mode - if needed */ + int mode; + + /* Provided by host chip */ + struct net_device *dev; + int (*mdio_read) (struct net_device * dev, int mii_id, int reg); + void (*mdio_write) (struct net_device * dev, int mii_id, int reg, + int val); +}; + +/* Pass in a struct mii_phy with dev, mdio_read and mdio_write + * filled, the remaining fields will be filled on return + */ +extern int mii_phy_probe(struct mii_phy *phy, int mii_id); + +static inline int __phy_read(struct mii_phy *phy, int id, int reg) +{ + return phy->mdio_read(phy->dev, id, reg); +} + +static inline void __phy_write(struct mii_phy *phy, int id, int reg, int val) +{ + phy->mdio_write(phy->dev, id, reg, val); +} + +static inline int phy_read(struct mii_phy *phy, int reg) +{ + return phy->mdio_read(phy->dev, phy->mii_id, reg); +} + +static inline void phy_write(struct mii_phy *phy, int reg, int val) +{ + phy->mdio_write(phy->dev, phy->mii_id, reg, val); +} + +#endif /* _IBM_EMAC_PHY_H_ */ diff --git a/drivers/net/ibm_emac/ibm_emac_rgmii.h b/drivers/net/ibm_emac/ibm_emac_rgmii.h new file mode 100644 index 000000000000..49f188f4ea6e --- /dev/null +++ b/drivers/net/ibm_emac/ibm_emac_rgmii.h @@ -0,0 +1,65 @@ +/* + * Defines for the IBM RGMII bridge + * + * Based on ocp_zmii.h/ibm_emac_zmii.h + * Armin Kuster akuster@mvista.com + * + * Copyright 2004 MontaVista Software, Inc. + * Matt Porter + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#ifndef _IBM_EMAC_RGMII_H_ +#define _IBM_EMAC_RGMII_H_ + +#include + +/* RGMII bridge */ +typedef struct rgmii_regs { + u32 fer; /* Function enable register */ + u32 ssr; /* Speed select register */ +} rgmii_t; + +#define RGMII_INPUTS 4 + +/* RGMII device */ +struct ibm_ocp_rgmii { + struct rgmii_regs *base; + int mode[RGMII_INPUTS]; + int users; /* number of EMACs using this RGMII bridge */ +}; + +/* Fuctional Enable Reg */ +#define RGMII_FER_MASK(x) (0x00000007 << (4*x)) +#define RGMII_RTBI 0x00000004 +#define RGMII_RGMII 0x00000005 +#define RGMII_TBI 0x00000006 +#define RGMII_GMII 0x00000007 + +/* Speed Selection reg */ + +#define RGMII_SP2_100 0x00000002 +#define RGMII_SP2_1000 0x00000004 +#define RGMII_SP3_100 0x00000200 +#define RGMII_SP3_1000 0x00000400 + +#define RGMII_MII2_SPDMASK 0x00000007 +#define RGMII_MII3_SPDMASK 0x00000700 + +#define RGMII_MII2_100MB RGMII_SP2_100 & ~RGMII_SP2_1000 +#define RGMII_MII2_1000MB RGMII_SP2_1000 & ~RGMII_SP2_100 +#define RGMII_MII2_10MB ~(RGMII_SP2_100 | RGMII_SP2_1000) +#define RGMII_MII3_100MB RGMII_SP3_100 & ~RGMII_SP3_1000 +#define RGMII_MII3_1000MB RGMII_SP3_1000 & ~RGMII_SP3_100 +#define RGMII_MII3_10MB ~(RGMII_SP3_100 | RGMII_SP3_1000) + +#define RTBI 0 +#define RGMII 1 +#define TBI 2 +#define GMII 3 + +#endif /* _IBM_EMAC_RGMII_H_ */ diff --git a/drivers/net/ibm_emac/ibm_emac_tah.h b/drivers/net/ibm_emac/ibm_emac_tah.h new file mode 100644 index 000000000000..ecfc69805521 --- /dev/null +++ b/drivers/net/ibm_emac/ibm_emac_tah.h @@ -0,0 +1,48 @@ +/* + * Defines for the IBM TAH + * + * Copyright 2004 MontaVista Software, Inc. + * Matt Porter + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#ifndef _IBM_EMAC_TAH_H +#define _IBM_EMAC_TAH_H + +/* TAH */ +typedef struct tah_regs { + u32 tah_revid; + u32 pad[3]; + u32 tah_mr; + u32 tah_ssr0; + u32 tah_ssr1; + u32 tah_ssr2; + u32 tah_ssr3; + u32 tah_ssr4; + u32 tah_ssr5; + u32 tah_tsr; +} tah_t; + +/* TAH engine */ +#define TAH_MR_CVR 0x80000000 +#define TAH_MR_SR 0x40000000 +#define TAH_MR_ST_256 0x01000000 +#define TAH_MR_ST_512 0x02000000 +#define TAH_MR_ST_768 0x03000000 +#define TAH_MR_ST_1024 0x04000000 +#define TAH_MR_ST_1280 0x05000000 +#define TAH_MR_ST_1536 0x06000000 +#define TAH_MR_TFS_16KB 0x00000000 +#define TAH_MR_TFS_2KB 0x00200000 +#define TAH_MR_TFS_4KB 0x00400000 +#define TAH_MR_TFS_6KB 0x00600000 +#define TAH_MR_TFS_8KB 0x00800000 +#define TAH_MR_TFS_10KB 0x00a00000 +#define TAH_MR_DTFP 0x00100000 +#define TAH_MR_DIG 0x00080000 + +#endif /* _IBM_EMAC_TAH_H */ diff --git a/drivers/net/ibm_emac/ibm_emac_zmii.h b/drivers/net/ibm_emac/ibm_emac_zmii.h new file mode 100644 index 000000000000..6f6cd2a39e38 --- /dev/null +++ b/drivers/net/ibm_emac/ibm_emac_zmii.h @@ -0,0 +1,93 @@ +/* + * ocp_zmii.h + * + * Defines for the IBM ZMII bridge + * + * Armin Kuster akuster@mvista.com + * Dec, 2001 + * + * Copyright 2001 MontaVista Softare Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#ifndef _IBM_EMAC_ZMII_H_ +#define _IBM_EMAC_ZMII_H_ + +#include + +/* ZMII bridge registers */ +struct zmii_regs { + u32 fer; /* Function enable reg */ + u32 ssr; /* Speed select reg */ + u32 smiirs; /* SMII status reg */ +}; + +#define ZMII_INPUTS 4 + +/* ZMII device */ +struct ibm_ocp_zmii { + struct zmii_regs *base; + int mode[ZMII_INPUTS]; + int users; /* number of EMACs using this ZMII bridge */ +}; + +/* Fuctional Enable Reg */ + +#define ZMII_FER_MASK(x) (0xf0000000 >> (4*x)) + +#define ZMII_MDI0 0x80000000 +#define ZMII_SMII0 0x40000000 +#define ZMII_RMII0 0x20000000 +#define ZMII_MII0 0x10000000 +#define ZMII_MDI1 0x08000000 +#define ZMII_SMII1 0x04000000 +#define ZMII_RMII1 0x02000000 +#define ZMII_MII1 0x01000000 +#define ZMII_MDI2 0x00800000 +#define ZMII_SMII2 0x00400000 +#define ZMII_RMII2 0x00200000 +#define ZMII_MII2 0x00100000 +#define ZMII_MDI3 0x00080000 +#define ZMII_SMII3 0x00040000 +#define ZMII_RMII3 0x00020000 +#define ZMII_MII3 0x00010000 + +/* Speed Selection reg */ + +#define ZMII_SCI0 0x40000000 +#define ZMII_FSS0 0x20000000 +#define ZMII_SP0 0x10000000 +#define ZMII_SCI1 0x04000000 +#define ZMII_FSS1 0x02000000 +#define ZMII_SP1 0x01000000 +#define ZMII_SCI2 0x00400000 +#define ZMII_FSS2 0x00200000 +#define ZMII_SP2 0x00100000 +#define ZMII_SCI3 0x00040000 +#define ZMII_FSS3 0x00020000 +#define ZMII_SP3 0x00010000 + +#define ZMII_MII0_100MB ZMII_SP0 +#define ZMII_MII0_10MB ~ZMII_SP0 +#define ZMII_MII1_100MB ZMII_SP1 +#define ZMII_MII1_10MB ~ZMII_SP1 +#define ZMII_MII2_100MB ZMII_SP2 +#define ZMII_MII2_10MB ~ZMII_SP2 +#define ZMII_MII3_100MB ZMII_SP3 +#define ZMII_MII3_10MB ~ZMII_SP3 + +/* SMII Status reg */ + +#define ZMII_STS0 0xFF000000 /* EMAC0 smii status mask */ +#define ZMII_STS1 0x00FF0000 /* EMAC1 smii status mask */ + +#define SMII 0 +#define RMII 1 +#define MII 2 +#define MDI 3 + +#endif /* _IBM_EMAC_ZMII_H_ */ -- cgit v1.2.3-59-g8ed1b