From 9c1029818c713eccdce945e45cd8fb927d6a3d6e Mon Sep 17 00:00:00 2001 From: Alexandru Ardelean Date: Fri, 16 Aug 2019 16:09:59 +0300 Subject: net: phy: adin: add support for Analog Devices PHYs This change adds support for Analog Devices Industrial Ethernet PHYs. Particularly the PHYs this driver adds support for: * ADIN1200 - Robust, Industrial, Low Power 10/100 Ethernet PHY * ADIN1300 - Robust, Industrial, Low Latency 10/100/1000 Gigabit Ethernet PHY The 2 chips are register compatible with one another. The main difference being that ADIN1200 doesn't operate in gigabit mode. The chips can be operated by the Generic PHY driver as well via the standard IEEE PHY registers (0x0000 - 0x000F) which are supported by the kernel as well. This assumes that configuration of the PHY has been done completely in HW, according to spec. Configuration can also be done via registers, which will be supported by this driver. Datasheets: https://www.analog.com/media/en/technical-documentation/data-sheets/ADIN1300.pdf https://www.analog.com/media/en/technical-documentation/data-sheets/ADIN1200.pdf Reviewed-by: Florian Fainelli Reviewed-by: Andrew Lunn Signed-off-by: Alexandru Ardelean Signed-off-by: David S. Miller --- drivers/net/phy/Makefile | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers/net/phy/Makefile') diff --git a/drivers/net/phy/Makefile b/drivers/net/phy/Makefile index ba07c27e4208..a03437e091f3 100644 --- a/drivers/net/phy/Makefile +++ b/drivers/net/phy/Makefile @@ -47,6 +47,7 @@ obj-$(CONFIG_SFP) += sfp.o sfp-obj-$(CONFIG_SFP) += sfp-bus.o obj-y += $(sfp-obj-y) $(sfp-obj-m) +obj-$(CONFIG_ADIN_PHY) += adin.o obj-$(CONFIG_AMD_PHY) += amd.o aquantia-objs += aquantia_main.o ifdef CONFIG_HWMON -- cgit v1.2.3-59-g8ed1b