From 9eb13f65c305ec6687d7666abce14e6c047fa872 Mon Sep 17 00:00:00 2001 From: Sebastian Frias Date: Wed, 23 Mar 2016 11:49:09 +0100 Subject: net: phy: at803x: Request 'reset' GPIO only for AT8030 PHY This removes the dependency on GPIOLIB for non faulty PHYs. Indeed, without this patch, if GPIOLIB is not selected devm_gpiod_get_optional() will return -ENOSYS and the driver probe call will fail, regardless of the actual PHY hardware. Out of the 3 PHYs supported by this driver (AT8030, AT8031, AT8035), only AT8030 presents the issues that commit 13a56b449325 ("net: phy: at803x: Add support for hardware reset") attempts to work-around by using a 'reset' GPIO line. Hence, only AT8030 should depend on GPIOLIB operating properly. Fixes: 13a56b449325 ("net: phy: at803x: Add support for hardware reset") Signed-off-by: Sebastian Frias Signed-off-by: David S. Miller --- drivers/net/phy/at803x.c | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'drivers/net/phy/at803x.c') diff --git a/drivers/net/phy/at803x.c b/drivers/net/phy/at803x.c index d7f03fa4ba8f..b3ffaee30858 100644 --- a/drivers/net/phy/at803x.c +++ b/drivers/net/phy/at803x.c @@ -277,12 +277,16 @@ static int at803x_probe(struct phy_device *phydev) if (!priv) return -ENOMEM; + if (phydev->drv->phy_id != ATH8030_PHY_ID) + goto does_not_require_reset_workaround; + gpiod_reset = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_LOW); if (IS_ERR(gpiod_reset)) return PTR_ERR(gpiod_reset); priv->gpiod_reset = gpiod_reset; +does_not_require_reset_workaround: phydev->priv = priv; return 0; -- cgit v1.2.3-59-g8ed1b