From a05d7dfc51417f6437ff35e4682fe547fb665286 Mon Sep 17 00:00:00 2001 From: Timur Tabi Date: Tue, 26 Apr 2016 12:44:18 -0500 Subject: net: phy: at803x: only the AT8030 needs a hardware reset on link change Commit 13a56b44 ("at803x: Add support for hardware reset") added a work-around for a hardware bug on the AT8030. However, the work-around was being called for all 803x PHYs, even those that don't need it. Function at803x_link_change_notify() checks to make sure that it only resets the PHY on the 8030, but it makes more sense to not call that function at all if it isn't needed. Signed-off-by: Timur Tabi Reviewed-by: Florian Fainelli Signed-off-by: David S. Miller --- drivers/net/phy/at803x.c | 40 ++++++++++++++++++---------------------- 1 file changed, 18 insertions(+), 22 deletions(-) (limited to 'drivers/net/phy/at803x.c') diff --git a/drivers/net/phy/at803x.c b/drivers/net/phy/at803x.c index b3ffaee30858..f279a897a5c7 100644 --- a/drivers/net/phy/at803x.c +++ b/drivers/net/phy/at803x.c @@ -359,27 +359,25 @@ static void at803x_link_change_notify(struct phy_device *phydev) * in the FIFO. In such cases, the FIFO enters an error mode it * cannot recover from by software. */ - if (phydev->drv->phy_id == ATH8030_PHY_ID) { - if (phydev->state == PHY_NOLINK) { - if (priv->gpiod_reset && !priv->phy_reset) { - struct at803x_context context; - - at803x_context_save(phydev, &context); - - gpiod_set_value(priv->gpiod_reset, 1); - msleep(1); - gpiod_set_value(priv->gpiod_reset, 0); - msleep(1); - - at803x_context_restore(phydev, &context); - - phydev_dbg(phydev, "%s(): phy was reset\n", - __func__); - priv->phy_reset = true; - } - } else { - priv->phy_reset = false; + if (phydev->state == PHY_NOLINK) { + if (priv->gpiod_reset && !priv->phy_reset) { + struct at803x_context context; + + at803x_context_save(phydev, &context); + + gpiod_set_value(priv->gpiod_reset, 1); + msleep(1); + gpiod_set_value(priv->gpiod_reset, 0); + msleep(1); + + at803x_context_restore(phydev, &context); + + phydev_dbg(phydev, "%s(): phy was reset\n", + __func__); + priv->phy_reset = true; } + } else { + priv->phy_reset = false; } } @@ -391,7 +389,6 @@ static struct phy_driver at803x_driver[] = { .phy_id_mask = 0xffffffef, .probe = at803x_probe, .config_init = at803x_config_init, - .link_change_notify = at803x_link_change_notify, .set_wol = at803x_set_wol, .get_wol = at803x_get_wol, .suspend = at803x_suspend, @@ -427,7 +424,6 @@ static struct phy_driver at803x_driver[] = { .phy_id_mask = 0xffffffef, .probe = at803x_probe, .config_init = at803x_config_init, - .link_change_notify = at803x_link_change_notify, .set_wol = at803x_set_wol, .get_wol = at803x_get_wol, .suspend = at803x_suspend, -- cgit v1.2.3-59-g8ed1b