From 1758bde2e4aa5ff188d53e7d9d388bbb7e12eebb Mon Sep 17 00:00:00 2001 From: Lukas Wunner Date: Tue, 28 Jun 2022 12:15:08 +0200 Subject: net: phy: Don't trigger state machine while in suspend Upon system sleep, mdio_bus_phy_suspend() stops the phy_state_machine(), but subsequent interrupts may retrigger it: They may have been left enabled to facilitate wakeup and are not quiesced until the ->suspend_noirq() phase. Unwanted interrupts may hence occur between mdio_bus_phy_suspend() and dpm_suspend_noirq(), as well as between dpm_resume_noirq() and mdio_bus_phy_resume(). Retriggering the phy_state_machine() through an interrupt is not only undesirable for the reason given in mdio_bus_phy_suspend() (freezing it midway with phydev->lock held), but also because the PHY may be inaccessible after it's suspended: Accesses to USB-attached PHYs are blocked once usb_suspend_both() clears the can_submit flag and PHYs on PCI network cards may become inaccessible upon suspend as well. Amend phy_interrupt() to avoid triggering the state machine if the PHY is suspended. Signal wakeup instead if the attached net_device or its parent has been configured as a wakeup source. (Those conditions are identical to mdio_bus_phy_may_suspend().) Postpone handling of the interrupt until the PHY has resumed. Before stopping the phy_state_machine() in mdio_bus_phy_suspend(), wait for a concurrent phy_interrupt() to run to completion. That is necessary because phy_interrupt() may have checked the PHY's suspend status before the system sleep transition commenced and it may thus retrigger the state machine after it was stopped. Likewise, after re-enabling interrupt handling in mdio_bus_phy_resume(), wait for a concurrent phy_interrupt() to complete to ensure that interrupts which it postponed are properly rerun. The issue was exposed by commit 1ce8b37241ed ("usbnet: smsc95xx: Forward PHY interrupts to PHY driver to avoid polling"), but has existed since forever. Fixes: 541cd3ee00a4 ("phylib: Fix deadlock on resume") Link: https://lore.kernel.org/netdev/a5315a8a-32c2-962f-f696-de9a26d30091@samsung.com/ Reported-by: Marek Szyprowski Tested-by: Marek Szyprowski Signed-off-by: Lukas Wunner Acked-by: Rafael J. Wysocki Cc: stable@vger.kernel.org # v2.6.33+ Reviewed-by: Andrew Lunn Link: https://lore.kernel.org/r/b7f386d04e9b5b0e2738f0125743e30676f309ef.1656410895.git.lukas@wunner.de Signed-off-by: Jakub Kicinski --- drivers/net/phy/phy_device.c | 23 +++++++++++++++++++++++ 1 file changed, 23 insertions(+) (limited to 'drivers/net/phy/phy_device.c') diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c index 431a8719c635..46acddd865a7 100644 --- a/drivers/net/phy/phy_device.c +++ b/drivers/net/phy/phy_device.c @@ -278,6 +278,15 @@ static __maybe_unused int mdio_bus_phy_suspend(struct device *dev) if (phydev->mac_managed_pm) return 0; + /* Wakeup interrupts may occur during the system sleep transition when + * the PHY is inaccessible. Set flag to postpone handling until the PHY + * has resumed. Wait for concurrent interrupt handler to complete. + */ + if (phy_interrupt_is_valid(phydev)) { + phydev->irq_suspended = 1; + synchronize_irq(phydev->irq); + } + /* We must stop the state machine manually, otherwise it stops out of * control, possibly with the phydev->lock held. Upon resume, netdev * may call phy routines that try to grab the same lock, and that may @@ -315,6 +324,20 @@ static __maybe_unused int mdio_bus_phy_resume(struct device *dev) if (ret < 0) return ret; no_resume: + if (phy_interrupt_is_valid(phydev)) { + phydev->irq_suspended = 0; + synchronize_irq(phydev->irq); + + /* Rerun interrupts which were postponed by phy_interrupt() + * because they occurred during the system sleep transition. + */ + if (phydev->irq_rerun) { + phydev->irq_rerun = 0; + enable_irq(phydev->irq); + irq_wake_thread(phydev->irq, phydev); + } + } + if (phydev->attached_dev && phydev->adjust_link) phy_start_machine(phydev); -- cgit v1.2.3-59-g8ed1b