From 548c36e983f346621b5cb9ab031e4383e9996576 Mon Sep 17 00:00:00 2001 From: Stephen Hemminger Date: Wed, 30 Jan 2008 22:04:05 -0800 Subject: sk98lin: remove obsolete driver All the hardware supported by this driver is now supported by the skge driver. The last remaining issue was support for ancient dual port SysKonnect fiber boards, and the skge driver now does these correctly (p.s. sk98lin was always broken on these old dual port boards anyway). Signed-off-by: Stephen Hemminger Signed-off-by: Jeff Garzik --- drivers/net/sk98lin/Makefile | 87 -------------------------------------------- 1 file changed, 87 deletions(-) delete mode 100644 drivers/net/sk98lin/Makefile (limited to 'drivers/net/sk98lin/Makefile') diff --git a/drivers/net/sk98lin/Makefile b/drivers/net/sk98lin/Makefile deleted file mode 100644 index afd900d5d730..000000000000 --- a/drivers/net/sk98lin/Makefile +++ /dev/null @@ -1,87 +0,0 @@ -# -# Makefile for the SysKonnect SK-98xx device driver. -# - - -# -# Standalone driver params -# SKPARAM += -DSK_KERNEL_24 -# SKPARAM += -DSK_KERNEL_24_26 -# SKPARAM += -DSK_KERNEL_26 -# SKPARAM += -DSK_KERNEL_22_24 - -obj-$(CONFIG_SK98LIN) += sk98lin.o -sk98lin-objs := \ - skge.o \ - skethtool.o \ - skdim.o \ - skaddr.o \ - skgehwt.o \ - skgeinit.o \ - skgepnmi.o \ - skgesirq.o \ - ski2c.o \ - sklm80.o \ - skqueue.o \ - skrlmt.o \ - sktimer.o \ - skvpd.o \ - skxmac2.o - -# DBGDEF = \ -# -DDEBUG - -ifdef DEBUG -DBGDEF += \ --DSK_DEBUG_CHKMOD=0x00000000L \ --DSK_DEBUG_CHKCAT=0x00000000L -endif - - -# **** possible debug modules for SK_DEBUG_CHKMOD ***************** -# SK_DBGMOD_MERR 0x00000001L /* general module error indication */ -# SK_DBGMOD_HWM 0x00000002L /* Hardware init module */ -# SK_DBGMOD_RLMT 0x00000004L /* RLMT module */ -# SK_DBGMOD_VPD 0x00000008L /* VPD module */ -# SK_DBGMOD_I2C 0x00000010L /* I2C module */ -# SK_DBGMOD_PNMI 0x00000020L /* PNMI module */ -# SK_DBGMOD_CSUM 0x00000040L /* CSUM module */ -# SK_DBGMOD_ADDR 0x00000080L /* ADDR module */ -# SK_DBGMOD_DRV 0x00010000L /* DRV module */ - -# **** possible debug categories for SK_DEBUG_CHKCAT ************** -# *** common modules *** -# SK_DBGCAT_INIT 0x00000001L module/driver initialization -# SK_DBGCAT_CTRL 0x00000002L controlling: add/rmv MCA/MAC and other controls (IOCTL) -# SK_DBGCAT_ERR 0x00000004L error handling paths -# SK_DBGCAT_TX 0x00000008L transmit path -# SK_DBGCAT_RX 0x00000010L receive path -# SK_DBGCAT_IRQ 0x00000020L general IRQ handling -# SK_DBGCAT_QUEUE 0x00000040L any queue management -# SK_DBGCAT_DUMP 0x00000080L large data output e.g. hex dump -# SK_DBGCAT_FATAL 0x00000100L large data output e.g. hex dump - -# *** driver (file skge.c) *** -# SK_DBGCAT_DRV_ENTRY 0x00010000 entry points -# SK_DBGCAT_DRV_??? 0x00020000 not used -# SK_DBGCAT_DRV_MCA 0x00040000 multicast -# SK_DBGCAT_DRV_TX_PROGRESS 0x00080000 tx path -# SK_DBGCAT_DRV_RX_PROGRESS 0x00100000 rx path -# SK_DBGCAT_DRV_PROGRESS 0x00200000 general runtime -# SK_DBGCAT_DRV_??? 0x00400000 not used -# SK_DBGCAT_DRV_PROM 0x00800000 promiscuous mode -# SK_DBGCAT_DRV_TX_FRAME 0x01000000 display tx frames -# SK_DBGCAT_DRV_ERROR 0x02000000 error conditions -# SK_DBGCAT_DRV_INT_SRC 0x04000000 interrupts sources -# SK_DBGCAT_DRV_EVENT 0x08000000 driver events - -EXTRA_CFLAGS += -Idrivers/net/sk98lin -DSK_DIAG_SUPPORT -DGENESIS -DYUKON $(DBGDEF) $(SKPARAM) - -clean: - rm -f core *.o *.a *.s - - - - - - -- cgit v1.2.3-59-g8ed1b