From 66466797c7e2406579724e42eb9cfe05d53a882b Mon Sep 17 00:00:00 2001 From: Stephen Hemminger Date: Thu, 1 Oct 2009 07:11:46 +0000 Subject: sky2: irqname based on pci address This is based on Michal Schmidt fix for skge. Most network drivers request their IRQ when the interface is activated. sky2 does it in ->probe() instead, because it can work with two-port cards where the two net_devices use the same IRQ. This works fine most of the time, except in some situations when the interface gets renamed. Consider this example: 1. modprobe sky2 The card is detected as eth0 and requests IRQ 17. Directory /proc/irq/17/eth0 is created. 2. There is an udev rule which says this interface should be called eth1, so udev renames eth0 -> eth1. 3. modprobe 8139too The Realtek card is detected as eth0. It will be using IRQ 17 too. 4. ip link set eth0 up Now 8139too requests IRQ 17. The result is: WARNING: at fs/proc/generic.c:590 proc_register ... proc_dir_entry '17/eth0' already registered The fix is for sky2 to name the irq based on the pci device, as is done by some other devices DRM, infiniband, ... ie. sky2@pci:0000:00:00 Signed-off-by: Stephen Hemminger Reviewed-by: Michal Schmidt Signed-off-by: David S. Miller --- drivers/net/sky2.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) (limited to 'drivers/net/sky2.c') diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c index ef1165718dd7..2ab5c39f33ca 100644 --- a/drivers/net/sky2.c +++ b/drivers/net/sky2.c @@ -4487,13 +4487,16 @@ static int __devinit sky2_probe(struct pci_dev *pdev, wol_default = device_may_wakeup(&pdev->dev) ? WAKE_MAGIC : 0; err = -ENOMEM; - hw = kzalloc(sizeof(*hw), GFP_KERNEL); + + hw = kzalloc(sizeof(*hw) + strlen(DRV_NAME "@pci:") + + strlen(pci_name(pdev)) + 1, GFP_KERNEL); if (!hw) { dev_err(&pdev->dev, "cannot allocate hardware struct\n"); goto err_out_free_regions; } hw->pdev = pdev; + sprintf(hw->irq_name, DRV_NAME "@pci:%s", pci_name(pdev)); hw->regs = ioremap_nocache(pci_resource_start(pdev, 0), 0x4000); if (!hw->regs) { @@ -4539,7 +4542,7 @@ static int __devinit sky2_probe(struct pci_dev *pdev, err = request_irq(pdev->irq, sky2_intr, (hw->flags & SKY2_HW_USE_MSI) ? 0 : IRQF_SHARED, - dev->name, hw); + hw->irq_name, hw); if (err) { dev_err(&pdev->dev, "cannot assign irq %d\n", pdev->irq); goto err_out_unregister; -- cgit v1.2.3-59-g8ed1b