From 6666cebc5e306f49a25bd20aa8c1cb8ef8950df5 Mon Sep 17 00:00:00 2001 From: Vladimir Oltean Date: Thu, 2 May 2019 23:23:34 +0300 Subject: net: dsa: sja1105: Add support for VLAN operations VLAN filtering cannot be properly disabled in SJA1105. So in order to emulate the "no VLAN awareness" behavior (not dropping traffic that is tagged with a VID that isn't configured on the port), we need to hack another switch feature: programmable TPID (which is 0x8100 for 802.1Q). We are reprogramming the TPID to a bogus value which leaves the switch thinking that all traffic is untagged, and therefore accepts it. Under a vlan_filtering bridge, the proper TPID of ETH_P_8021Q is installed again, and the switch starts identifying 802.1Q-tagged traffic. Signed-off-by: Vladimir Oltean Reviewed-by: Florian Fainelli Signed-off-by: David S. Miller --- drivers/net/dsa/sja1105/sja1105_main.c | 248 +++++++++++++++++++++++- drivers/net/dsa/sja1105/sja1105_static_config.c | 38 ++++ drivers/net/dsa/sja1105/sja1105_static_config.h | 3 + 3 files changed, 287 insertions(+), 2 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/dsa/sja1105/sja1105_main.c b/drivers/net/dsa/sja1105/sja1105_main.c index d27b9c178cba..f7b1525b388a 100644 --- a/drivers/net/dsa/sja1105/sja1105_main.c +++ b/drivers/net/dsa/sja1105/sja1105_main.c @@ -251,6 +251,13 @@ static int sja1105_init_static_vlan(struct sja1105_private *priv) table = &priv->static_config.tables[BLK_IDX_VLAN_LOOKUP]; /* The static VLAN table will only contain the initial pvid of 0. + * All other VLANs are to be configured through dynamic entries, + * and kept in the static configuration table as backing memory. + * The pvid of 0 is sufficient to pass traffic while the ports are + * standalone and when vlan_filtering is disabled. When filtering + * gets enabled, the switchdev core sets up the VLAN ID 1 and sets + * it as the new pvid. Actually 'pvid 1' still comes up in 'bridge + * vlan' even when vlan_filtering is off, but it has no effect. */ if (table->entry_count) { kfree(table->entries); @@ -391,8 +398,11 @@ static int sja1105_init_general_params(struct sja1105_private *priv) .vlmask = 0, /* Only update correctionField for 1-step PTP (L2 transport) */ .ignore2stf = 0, - .tpid = ETH_P_8021Q, - .tpid2 = ETH_P_8021Q, + /* Forcefully disable VLAN filtering by telling + * the switch that VLAN has a different EtherType. + */ + .tpid = ETH_P_SJA1105, + .tpid2 = ETH_P_SJA1105, }; struct sja1105_table *table; int i; @@ -954,12 +964,233 @@ static void sja1105_bridge_leave(struct dsa_switch *ds, int port, sja1105_bridge_member(ds, port, br, false); } +/* For situations where we need to change a setting at runtime that is only + * available through the static configuration, resetting the switch in order + * to upload the new static config is unavoidable. Back up the settings we + * modify at runtime (currently only MAC) and restore them after uploading, + * such that this operation is relatively seamless. + */ +static int sja1105_static_config_reload(struct sja1105_private *priv) +{ + struct sja1105_mac_config_entry *mac; + int speed_mbps[SJA1105_NUM_PORTS]; + int rc, i; + + mac = priv->static_config.tables[BLK_IDX_MAC_CONFIG].entries; + + /* Back up settings changed by sja1105_adjust_port_config and + * and restore their defaults. + */ + for (i = 0; i < SJA1105_NUM_PORTS; i++) { + speed_mbps[i] = sja1105_speed[mac[i].speed]; + mac[i].speed = SJA1105_SPEED_AUTO; + } + + /* Reset switch and send updated static configuration */ + rc = sja1105_static_config_upload(priv); + if (rc < 0) + goto out; + + /* Configure the CGU (PLLs) for MII and RMII PHYs. + * For these interfaces there is no dynamic configuration + * needed, since PLLs have same settings at all speeds. + */ + rc = sja1105_clocking_setup(priv); + if (rc < 0) + goto out; + + for (i = 0; i < SJA1105_NUM_PORTS; i++) { + bool enabled = (speed_mbps[i] != 0); + + rc = sja1105_adjust_port_config(priv, i, speed_mbps[i], + enabled); + if (rc < 0) + goto out; + } +out: + return rc; +} + +/* The TPID setting belongs to the General Parameters table, + * which can only be partially reconfigured at runtime (and not the TPID). + * So a switch reset is required. + */ +static int sja1105_change_tpid(struct sja1105_private *priv, + u16 tpid, u16 tpid2) +{ + struct sja1105_general_params_entry *general_params; + struct sja1105_table *table; + + table = &priv->static_config.tables[BLK_IDX_GENERAL_PARAMS]; + general_params = table->entries; + general_params->tpid = tpid; + general_params->tpid2 = tpid2; + return sja1105_static_config_reload(priv); +} + +static int sja1105_pvid_apply(struct sja1105_private *priv, int port, u16 pvid) +{ + struct sja1105_mac_config_entry *mac; + + mac = priv->static_config.tables[BLK_IDX_MAC_CONFIG].entries; + + mac[port].vlanid = pvid; + + return sja1105_dynamic_config_write(priv, BLK_IDX_MAC_CONFIG, port, + &mac[port], true); +} + +static int sja1105_is_vlan_configured(struct sja1105_private *priv, u16 vid) +{ + struct sja1105_vlan_lookup_entry *vlan; + int count, i; + + vlan = priv->static_config.tables[BLK_IDX_VLAN_LOOKUP].entries; + count = priv->static_config.tables[BLK_IDX_VLAN_LOOKUP].entry_count; + + for (i = 0; i < count; i++) + if (vlan[i].vlanid == vid) + return i; + + /* Return an invalid entry index if not found */ + return -1; +} + +static int sja1105_vlan_apply(struct sja1105_private *priv, int port, u16 vid, + bool enabled, bool untagged) +{ + struct sja1105_vlan_lookup_entry *vlan; + struct sja1105_table *table; + bool keep = true; + int match, rc; + + table = &priv->static_config.tables[BLK_IDX_VLAN_LOOKUP]; + + match = sja1105_is_vlan_configured(priv, vid); + if (match < 0) { + /* Can't delete a missing entry. */ + if (!enabled) + return 0; + rc = sja1105_table_resize(table, table->entry_count + 1); + if (rc) + return rc; + match = table->entry_count - 1; + } + /* Assign pointer after the resize (it's new memory) */ + vlan = table->entries; + vlan[match].vlanid = vid; + if (enabled) { + vlan[match].vlan_bc |= BIT(port); + vlan[match].vmemb_port |= BIT(port); + } else { + vlan[match].vlan_bc &= ~BIT(port); + vlan[match].vmemb_port &= ~BIT(port); + } + /* Also unset tag_port if removing this VLAN was requested, + * just so we don't have a confusing bitmap (no practical purpose). + */ + if (untagged || !enabled) + vlan[match].tag_port &= ~BIT(port); + else + vlan[match].tag_port |= BIT(port); + /* If there's no port left as member of this VLAN, + * it's time for it to go. + */ + if (!vlan[match].vmemb_port) + keep = false; + + dev_dbg(priv->ds->dev, + "%s: port %d, vid %llu, broadcast domain 0x%llx, " + "port members 0x%llx, tagged ports 0x%llx, keep %d\n", + __func__, port, vlan[match].vlanid, vlan[match].vlan_bc, + vlan[match].vmemb_port, vlan[match].tag_port, keep); + + rc = sja1105_dynamic_config_write(priv, BLK_IDX_VLAN_LOOKUP, vid, + &vlan[match], keep); + if (rc < 0) + return rc; + + if (!keep) + return sja1105_table_delete_entry(table, match); + + return 0; +} + static enum dsa_tag_protocol sja1105_get_tag_protocol(struct dsa_switch *ds, int port) { return DSA_TAG_PROTO_NONE; } +/* This callback needs to be present */ +static int sja1105_vlan_prepare(struct dsa_switch *ds, int port, + const struct switchdev_obj_port_vlan *vlan) +{ + return 0; +} + +static int sja1105_vlan_filtering(struct dsa_switch *ds, int port, bool enabled) +{ + struct sja1105_private *priv = ds->priv; + int rc; + + if (enabled) + /* Enable VLAN filtering. */ + rc = sja1105_change_tpid(priv, ETH_P_8021Q, ETH_P_8021AD); + else + /* Disable VLAN filtering. */ + rc = sja1105_change_tpid(priv, ETH_P_SJA1105, ETH_P_SJA1105); + if (rc) + dev_err(ds->dev, "Failed to change VLAN Ethertype\n"); + + return rc; +} + +static void sja1105_vlan_add(struct dsa_switch *ds, int port, + const struct switchdev_obj_port_vlan *vlan) +{ + struct sja1105_private *priv = ds->priv; + u16 vid; + int rc; + + for (vid = vlan->vid_begin; vid <= vlan->vid_end; vid++) { + rc = sja1105_vlan_apply(priv, port, vid, true, vlan->flags & + BRIDGE_VLAN_INFO_UNTAGGED); + if (rc < 0) { + dev_err(ds->dev, "Failed to add VLAN %d to port %d: %d\n", + vid, port, rc); + return; + } + if (vlan->flags & BRIDGE_VLAN_INFO_PVID) { + rc = sja1105_pvid_apply(ds->priv, port, vid); + if (rc < 0) { + dev_err(ds->dev, "Failed to set pvid %d on port %d: %d\n", + vid, port, rc); + return; + } + } + } +} + +static int sja1105_vlan_del(struct dsa_switch *ds, int port, + const struct switchdev_obj_port_vlan *vlan) +{ + struct sja1105_private *priv = ds->priv; + u16 vid; + int rc; + + for (vid = vlan->vid_begin; vid <= vlan->vid_end; vid++) { + rc = sja1105_vlan_apply(priv, port, vid, false, vlan->flags & + BRIDGE_VLAN_INFO_UNTAGGED); + if (rc < 0) { + dev_err(ds->dev, "Failed to remove VLAN %d from port %d: %d\n", + vid, port, rc); + return rc; + } + } + return 0; +} + /* The programming model for the SJA1105 switch is "all-at-once" via static * configuration tables. Some of these can be dynamically modified at runtime, * but not the xMII mode parameters table. @@ -1005,6 +1236,15 @@ static int sja1105_setup(struct dsa_switch *ds) dev_err(ds->dev, "Failed to configure MII clocking: %d\n", rc); return rc; } + /* On SJA1105, VLAN filtering per se is always enabled in hardware. + * The only thing we can do to disable it is lie about what the 802.1Q + * EtherType is. + * So it will still try to apply VLAN filtering, but all ingress + * traffic (except frames received with EtherType of ETH_P_SJA1105) + * will be internally tagged with a distorted VLAN header where the + * TPID is ETH_P_SJA1105, and the VLAN ID is the port pvid. + */ + ds->vlan_filtering_is_global = true; return 0; } @@ -1018,6 +1258,10 @@ static const struct dsa_switch_ops sja1105_switch_ops = { .port_fdb_del = sja1105_fdb_del, .port_bridge_join = sja1105_bridge_join, .port_bridge_leave = sja1105_bridge_leave, + .port_vlan_prepare = sja1105_vlan_prepare, + .port_vlan_filtering = sja1105_vlan_filtering, + .port_vlan_add = sja1105_vlan_add, + .port_vlan_del = sja1105_vlan_del, .port_mdb_prepare = sja1105_mdb_prepare, .port_mdb_add = sja1105_mdb_add, .port_mdb_del = sja1105_mdb_del, diff --git a/drivers/net/dsa/sja1105/sja1105_static_config.c b/drivers/net/dsa/sja1105/sja1105_static_config.c index 84ee623c6336..b3c992b0abb0 100644 --- a/drivers/net/dsa/sja1105/sja1105_static_config.c +++ b/drivers/net/dsa/sja1105/sja1105_static_config.c @@ -947,3 +947,41 @@ void sja1105_static_config_free(struct sja1105_static_config *config) } } } + +int sja1105_table_delete_entry(struct sja1105_table *table, int i) +{ + size_t entry_size = table->ops->unpacked_entry_size; + u8 *entries = table->entries; + + if (i > table->entry_count) + return -ERANGE; + + memmove(entries + i * entry_size, entries + (i + 1) * entry_size, + (table->entry_count - i) * entry_size); + + table->entry_count--; + + return 0; +} + +/* No pointers to table->entries should be kept when this is called. */ +int sja1105_table_resize(struct sja1105_table *table, size_t new_count) +{ + size_t entry_size = table->ops->unpacked_entry_size; + void *new_entries, *old_entries = table->entries; + + if (new_count > table->ops->max_entry_count) + return -ERANGE; + + new_entries = kcalloc(new_count, entry_size, GFP_KERNEL); + if (!new_entries) + return -ENOMEM; + + memcpy(new_entries, old_entries, min(new_count, table->entry_count) * + entry_size); + + table->entries = new_entries; + table->entry_count = new_count; + kfree(old_entries); + return 0; +} diff --git a/drivers/net/dsa/sja1105/sja1105_static_config.h b/drivers/net/dsa/sja1105/sja1105_static_config.h index 7b0a02fe3147..069ca8fd059c 100644 --- a/drivers/net/dsa/sja1105/sja1105_static_config.h +++ b/drivers/net/dsa/sja1105/sja1105_static_config.h @@ -240,6 +240,9 @@ int sja1105_static_config_init(struct sja1105_static_config *config, u64 device_id); void sja1105_static_config_free(struct sja1105_static_config *config); +int sja1105_table_delete_entry(struct sja1105_table *table, int i); +int sja1105_table_resize(struct sja1105_table *table, size_t new_count); + u32 sja1105_crc32(const void *buf, size_t len); void sja1105_pack(void *buf, const u64 *val, int start, int end, size_t len); -- cgit v1.2.3-59-g8ed1b