From 8a189f1288b654e45f2ec9393abfb1390b261ae9 Mon Sep 17 00:00:00 2001 From: "Maciej W. Rozycki" Date: Thu, 25 Sep 2014 11:06:39 +0100 Subject: defxx: Correct DEFEA's ESIC port I/O accesses Reverse the order of arguments to `outb', data to write comes first. Signed-off-by: Maciej W. Rozycki Signed-off-by: David S. Miller --- drivers/net/fddi/defxx.c | 30 +++++++++++++++--------------- 1 file changed, 15 insertions(+), 15 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/fddi/defxx.c b/drivers/net/fddi/defxx.c index c44eaf019dea..6068db874281 100644 --- a/drivers/net/fddi/defxx.c +++ b/drivers/net/fddi/defxx.c @@ -719,28 +719,28 @@ static void dfx_bus_init(struct net_device *dev) /* Set the decode range of the board. */ val = ((bp->base.port >> 12) << PI_IO_CMP_V_SLOT); - outb(base_addr + PI_ESIC_K_IO_ADD_CMP_0_1, val); - outb(base_addr + PI_ESIC_K_IO_ADD_CMP_0_0, 0); - outb(base_addr + PI_ESIC_K_IO_ADD_CMP_1_1, val); - outb(base_addr + PI_ESIC_K_IO_ADD_CMP_1_0, 0); + outb(val, base_addr + PI_ESIC_K_IO_ADD_CMP_0_1); + outb(0, base_addr + PI_ESIC_K_IO_ADD_CMP_0_0); + outb(val, base_addr + PI_ESIC_K_IO_ADD_CMP_1_1); + outb(0, base_addr + PI_ESIC_K_IO_ADD_CMP_1_0); val = PI_ESIC_K_CSR_IO_LEN - 1; - outb(base_addr + PI_ESIC_K_IO_ADD_MASK_0_1, (val >> 8) & 0xff); - outb(base_addr + PI_ESIC_K_IO_ADD_MASK_0_0, val & 0xff); - outb(base_addr + PI_ESIC_K_IO_ADD_MASK_1_1, (val >> 8) & 0xff); - outb(base_addr + PI_ESIC_K_IO_ADD_MASK_1_0, val & 0xff); + outb(val, base_addr + PI_ESIC_K_IO_ADD_MASK_0_1); + outb(0, base_addr + PI_ESIC_K_IO_ADD_MASK_0_0); + outb(val, base_addr + PI_ESIC_K_IO_ADD_MASK_1_1); + outb(0, base_addr + PI_ESIC_K_IO_ADD_MASK_1_0); /* Enable the decoders. */ val = PI_FUNCTION_CNTRL_M_IOCS1 | PI_FUNCTION_CNTRL_M_IOCS0; if (dfx_use_mmio) val |= PI_FUNCTION_CNTRL_M_MEMCS0; - outb(base_addr + PI_ESIC_K_FUNCTION_CNTRL, val); + outb(val, base_addr + PI_ESIC_K_FUNCTION_CNTRL); /* * Enable access to the rest of the module * (including PDQ and packet memory). */ val = PI_SLOT_CNTRL_M_ENB; - outb(base_addr + PI_ESIC_K_SLOT_CNTRL, val); + outb(val, base_addr + PI_ESIC_K_SLOT_CNTRL); /* * Map PDQ registers into memory or port space. This is @@ -751,12 +751,12 @@ static void dfx_bus_init(struct net_device *dev) val |= PI_BURST_HOLDOFF_V_MEM_MAP; else val &= ~PI_BURST_HOLDOFF_V_MEM_MAP; - outb(base_addr + PI_DEFEA_K_BURST_HOLDOFF, val); + outb(val, base_addr + PI_DEFEA_K_BURST_HOLDOFF); /* Enable interrupts at EISA bus interface chip (ESIC) */ val = inb(base_addr + PI_ESIC_K_IO_CONFIG_STAT_0); val |= PI_CONFIG_STAT_0_M_INT_ENB; - outb(base_addr + PI_ESIC_K_IO_CONFIG_STAT_0, val); + outb(val, base_addr + PI_ESIC_K_IO_CONFIG_STAT_0); } if (dfx_bus_pci) { struct pci_dev *pdev = to_pci_dev(bdev); @@ -825,7 +825,7 @@ static void dfx_bus_uninit(struct net_device *dev) /* Disable interrupts at EISA bus interface chip (ESIC) */ val = inb(base_addr + PI_ESIC_K_IO_CONFIG_STAT_0); val &= ~PI_CONFIG_STAT_0_M_INT_ENB; - outb(base_addr + PI_ESIC_K_IO_CONFIG_STAT_0, val); + outb(val, base_addr + PI_ESIC_K_IO_CONFIG_STAT_0); } if (dfx_bus_pci) { /* Disable interrupts at PCI bus interface chip (PFI) */ @@ -1917,7 +1917,7 @@ static irqreturn_t dfx_interrupt(int irq, void *dev_id) /* Disable interrupts at the ESIC */ status &= ~PI_CONFIG_STAT_0_M_INT_ENB; - outb(base_addr + PI_ESIC_K_IO_CONFIG_STAT_0, status); + outb(status, base_addr + PI_ESIC_K_IO_CONFIG_STAT_0); /* Call interrupt service routine for this adapter */ dfx_int_common(dev); @@ -1925,7 +1925,7 @@ static irqreturn_t dfx_interrupt(int irq, void *dev_id) /* Reenable interrupts at the ESIC */ status = inb(base_addr + PI_ESIC_K_IO_CONFIG_STAT_0); status |= PI_CONFIG_STAT_0_M_INT_ENB; - outb(base_addr + PI_ESIC_K_IO_CONFIG_STAT_0, status); + outb(status, base_addr + PI_ESIC_K_IO_CONFIG_STAT_0); spin_unlock(&bp->lock); } -- cgit v1.2.3-59-g8ed1b