From 8c29bebb1f8a68556db70088fd8f5938527a7346 Mon Sep 17 00:00:00 2001 From: Tristram Ha Date: Thu, 28 Feb 2019 19:57:24 -0800 Subject: net: dsa: microchip: add KSZ9893 switch support Add KSZ9893 switch support in KSZ9477 driver. This switch is similar to KSZ9477 except the ingress tail tag has 1 byte instead of 2 bytes, so KSZ9893 tagging will be used. The XMII register that governs how the host port communicates with the MAC also has different register definitions. Signed-off-by: Tristram Ha Signed-off-by: David S. Miller --- drivers/net/dsa/microchip/ksz9477.c | 242 ++++++++++++++++++++++++++++++-- drivers/net/dsa/microchip/ksz9477_spi.c | 4 +- drivers/net/dsa/microchip/ksz_common.c | 4 +- 3 files changed, 235 insertions(+), 15 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/dsa/microchip/ksz9477.c b/drivers/net/dsa/microchip/ksz9477.c index 03de50e62beb..f16e1d7d8615 100644 --- a/drivers/net/dsa/microchip/ksz9477.c +++ b/drivers/net/dsa/microchip/ksz9477.c @@ -18,6 +18,11 @@ #include "ksz9477_reg.h" #include "ksz_common.h" +/* Used with variable features to indicate capabilities. */ +#define GBIT_SUPPORT BIT(0) +#define NEW_XMII BIT(1) +#define IS_9893 BIT(2) + static const struct { int index; char string[ETH_GSTRING_LEN]; @@ -328,7 +333,12 @@ static void ksz9477_port_init_cnt(struct ksz_device *dev, int port) static enum dsa_tag_protocol ksz9477_get_tag_protocol(struct dsa_switch *ds, int port) { - return DSA_TAG_PROTO_KSZ9477; + enum dsa_tag_protocol proto = DSA_TAG_PROTO_KSZ9477; + struct ksz_device *dev = ds->priv; + + if (dev->features & IS_9893) + proto = DSA_TAG_PROTO_KSZ9893; + return proto; } static int ksz9477_phy_read16(struct dsa_switch *ds, int addr, int reg) @@ -389,6 +399,10 @@ static int ksz9477_phy_write16(struct dsa_switch *ds, int addr, int reg, /* No real PHY after this. */ if (addr >= dev->phy_port_cnt) return 0; + + /* No gigabit support. Do not write to this register. */ + if (!(dev->features & GBIT_SUPPORT) && reg == MII_CTRL1000) + return 0; ksz_pwrite16(dev, addr, 0x100 + (reg << 1), val); return 0; @@ -998,11 +1012,156 @@ static void ksz9477_port_mirror_del(struct dsa_switch *ds, int port, static void ksz9477_phy_setup(struct ksz_device *dev, int port, struct phy_device *phy) { - if (port < dev->phy_port_cnt) { - /* The MAC actually cannot run in 1000 half-duplex mode. */ + /* Only apply to port with PHY. */ + if (port >= dev->phy_port_cnt) + return; + + /* The MAC actually cannot run in 1000 half-duplex mode. */ + phy_remove_link_mode(phy, + ETHTOOL_LINK_MODE_1000baseT_Half_BIT); + + /* PHY does not support gigabit. */ + if (!(dev->features & GBIT_SUPPORT)) phy_remove_link_mode(phy, - ETHTOOL_LINK_MODE_1000baseT_Half_BIT); + ETHTOOL_LINK_MODE_1000baseT_Full_BIT); +} + +static bool ksz9477_get_gbit(struct ksz_device *dev, u8 data) +{ + bool gbit; + + if (dev->features & NEW_XMII) + gbit = !(data & PORT_MII_NOT_1GBIT); + else + gbit = !!(data & PORT_MII_1000MBIT_S1); + return gbit; +} + +static void ksz9477_set_gbit(struct ksz_device *dev, bool gbit, u8 *data) +{ + if (dev->features & NEW_XMII) { + if (gbit) + *data &= ~PORT_MII_NOT_1GBIT; + else + *data |= PORT_MII_NOT_1GBIT; + } else { + if (gbit) + *data |= PORT_MII_1000MBIT_S1; + else + *data &= ~PORT_MII_1000MBIT_S1; + } +} + +static int ksz9477_get_xmii(struct ksz_device *dev, u8 data) +{ + int mode; + + if (dev->features & NEW_XMII) { + switch (data & PORT_MII_SEL_M) { + case PORT_MII_SEL: + mode = 0; + break; + case PORT_RMII_SEL: + mode = 1; + break; + case PORT_GMII_SEL: + mode = 2; + break; + default: + mode = 3; + } + } else { + switch (data & PORT_MII_SEL_M) { + case PORT_MII_SEL_S1: + mode = 0; + break; + case PORT_RMII_SEL_S1: + mode = 1; + break; + case PORT_GMII_SEL_S1: + mode = 2; + break; + default: + mode = 3; + } + } + return mode; +} + +static void ksz9477_set_xmii(struct ksz_device *dev, int mode, u8 *data) +{ + u8 xmii; + + if (dev->features & NEW_XMII) { + switch (mode) { + case 0: + xmii = PORT_MII_SEL; + break; + case 1: + xmii = PORT_RMII_SEL; + break; + case 2: + xmii = PORT_GMII_SEL; + break; + default: + xmii = PORT_RGMII_SEL; + break; + } + } else { + switch (mode) { + case 0: + xmii = PORT_MII_SEL_S1; + break; + case 1: + xmii = PORT_RMII_SEL_S1; + break; + case 2: + xmii = PORT_GMII_SEL_S1; + break; + default: + xmii = PORT_RGMII_SEL_S1; + break; + } + } + *data &= ~PORT_MII_SEL_M; + *data |= xmii; +} + +static phy_interface_t ksz9477_get_interface(struct ksz_device *dev, int port) +{ + phy_interface_t interface; + bool gbit; + int mode; + u8 data8; + + if (port < dev->phy_port_cnt) + return PHY_INTERFACE_MODE_NA; + ksz_pread8(dev, port, REG_PORT_XMII_CTRL_1, &data8); + gbit = ksz9477_get_gbit(dev, data8); + mode = ksz9477_get_xmii(dev, data8); + switch (mode) { + case 2: + interface = PHY_INTERFACE_MODE_GMII; + if (gbit) + break; + case 0: + interface = PHY_INTERFACE_MODE_MII; + break; + case 1: + interface = PHY_INTERFACE_MODE_RMII; + break; + default: + interface = PHY_INTERFACE_MODE_RGMII; + if (data8 & PORT_RGMII_ID_EG_ENABLE) + interface = PHY_INTERFACE_MODE_RGMII_TXID; + if (data8 & PORT_RGMII_ID_IG_ENABLE) { + interface = PHY_INTERFACE_MODE_RGMII_RXID; + if (data8 & PORT_RGMII_ID_EG_ENABLE) + interface = PHY_INTERFACE_MODE_RGMII_ID; + } + break; } + return interface; } static void ksz9477_port_setup(struct ksz_device *dev, int port, bool cpu_port) @@ -1051,24 +1210,25 @@ static void ksz9477_port_setup(struct ksz_device *dev, int port, bool cpu_port) /* configure MAC to 1G & RGMII mode */ ksz_pread8(dev, port, REG_PORT_XMII_CTRL_1, &data8); - data8 &= ~PORT_MII_NOT_1GBIT; - data8 &= ~PORT_MII_SEL_M; switch (dev->interface) { case PHY_INTERFACE_MODE_MII: - data8 |= PORT_MII_NOT_1GBIT; - data8 |= PORT_MII_SEL; + ksz9477_set_xmii(dev, 0, &data8); + ksz9477_set_gbit(dev, false, &data8); p->phydev.speed = SPEED_100; break; case PHY_INTERFACE_MODE_RMII: - data8 |= PORT_MII_NOT_1GBIT; - data8 |= PORT_RMII_SEL; + ksz9477_set_xmii(dev, 1, &data8); + ksz9477_set_gbit(dev, false, &data8); p->phydev.speed = SPEED_100; break; case PHY_INTERFACE_MODE_GMII: - data8 |= PORT_GMII_SEL; + ksz9477_set_xmii(dev, 2, &data8); + ksz9477_set_gbit(dev, true, &data8); p->phydev.speed = SPEED_1000; break; default: + ksz9477_set_xmii(dev, 3, &data8); + ksz9477_set_gbit(dev, true, &data8); data8 &= ~PORT_RGMII_ID_IG_ENABLE; data8 &= ~PORT_RGMII_ID_EG_ENABLE; if (dev->interface == PHY_INTERFACE_MODE_RGMII_ID || @@ -1077,7 +1237,6 @@ static void ksz9477_port_setup(struct ksz_device *dev, int port, bool cpu_port) if (dev->interface == PHY_INTERFACE_MODE_RGMII_ID || dev->interface == PHY_INTERFACE_MODE_RGMII_TXID) data8 |= PORT_RGMII_ID_EG_ENABLE; - data8 |= PORT_RGMII_SEL; p->phydev.speed = SPEED_1000; break; } @@ -1115,10 +1274,25 @@ static void ksz9477_config_cpu_port(struct dsa_switch *ds) for (i = 0; i < dev->port_cnt; i++) { if (dsa_is_cpu_port(ds, i) && (dev->cpu_ports & (1 << i))) { + phy_interface_t interface; + dev->cpu_port = i; dev->host_mask = (1 << dev->cpu_port); dev->port_mask |= dev->host_mask; + /* Read from XMII register to determine host port + * interface. If set specifically in device tree + * note the difference to help debugging. + */ + interface = ksz9477_get_interface(dev, i); + if (!dev->interface) + dev->interface = interface; + if (interface && interface != dev->interface) + dev_info(dev->dev, + "use %s instead of %s\n", + phy_modes(dev->interface), + phy_modes(interface)); + /* enable cpu port */ ksz9477_port_setup(dev, i, true); p = &dev->ports[dev->cpu_port]; @@ -1172,6 +1346,9 @@ static int ksz9477_setup(struct dsa_switch *ds) ksz9477_cfg32(dev, REG_SW_QM_CTRL__4, UNICAST_VLAN_BOUNDARY, true); + /* Do not work correctly with tail tagging. */ + ksz_cfg(dev, REG_SW_MAC_CTRL_0, SW_CHECK_LENGTH, false); + /* accept packet up to 2000bytes */ ksz_cfg(dev, REG_SW_MAC_CTRL_1, SW_LEGAL_PACKET_DISABLE, true); @@ -1230,6 +1407,8 @@ static u32 ksz9477_get_port_addr(int port, int offset) static int ksz9477_switch_detect(struct ksz_device *dev) { u8 data8; + u8 id_hi; + u8 id_lo; u32 id32; int ret; @@ -1245,6 +1424,9 @@ static int ksz9477_switch_detect(struct ksz_device *dev) /* read chip id */ ret = ksz_read32(dev, REG_CHIP_ID0__1, &id32); + if (ret) + return ret; + ret = ksz_read8(dev, REG_GLOBAL_OPTIONS, &data8); if (ret) return ret; @@ -1252,6 +1434,32 @@ static int ksz9477_switch_detect(struct ksz_device *dev) dev->mib_port_cnt = TOTAL_PORT_NUM; dev->phy_port_cnt = 5; + /* Default capability is gigabit capable. */ + dev->features = GBIT_SUPPORT; + + id_hi = (u8)(id32 >> 16); + id_lo = (u8)(id32 >> 8); + if ((id_lo & 0xf) == 3) { + /* Chip is from KSZ9893 design. */ + dev->features |= IS_9893; + + /* Chip does not support gigabit. */ + if (data8 & SW_QW_ABLE) + dev->features &= ~GBIT_SUPPORT; + dev->mib_port_cnt = 3; + dev->phy_port_cnt = 2; + } else { + /* Chip uses new XMII register definitions. */ + dev->features |= NEW_XMII; + + /* Chip does not support gigabit. */ + if (!(data8 & SW_GIGABIT_ABLE)) + dev->features &= ~GBIT_SUPPORT; + } + + /* Change chip id to known ones so it can be matched against them. */ + id32 = (id_hi << 16) | (id_lo << 8); + dev->chip_id = id32; return 0; @@ -1286,6 +1494,15 @@ static const struct ksz_chip_data ksz9477_switch_chips[] = { .cpu_ports = 0x7F, /* can be configured as cpu port */ .port_cnt = 7, /* total physical port count */ }, + { + .chip_id = 0x00989300, + .dev_name = "KSZ9893", + .num_vlans = 4096, + .num_alus = 4096, + .num_statics = 16, + .cpu_ports = 0x07, /* can be configured as cpu port */ + .port_cnt = 3, /* total port count */ + }, }; static int ksz9477_switch_init(struct ksz_device *dev) @@ -1333,7 +1550,6 @@ static int ksz9477_switch_init(struct ksz_device *dev) if (!dev->ports[i].mib.counters) return -ENOMEM; } - dev->interface = PHY_INTERFACE_MODE_RGMII_TXID; return 0; } diff --git a/drivers/net/dsa/microchip/ksz9477_spi.c b/drivers/net/dsa/microchip/ksz9477_spi.c index d757ba151cb1..75178624d3f5 100644 --- a/drivers/net/dsa/microchip/ksz9477_spi.c +++ b/drivers/net/dsa/microchip/ksz9477_spi.c @@ -2,7 +2,7 @@ /* * Microchip KSZ9477 series register access through SPI * - * Copyright (C) 2017-2018 Microchip Technology Inc. + * Copyright (C) 2017-2019 Microchip Technology Inc. */ #include @@ -155,6 +155,8 @@ static void ksz9477_spi_shutdown(struct spi_device *spi) static const struct of_device_id ksz9477_dt_ids[] = { { .compatible = "microchip,ksz9477" }, { .compatible = "microchip,ksz9897" }, + { .compatible = "microchip,ksz9893" }, + { .compatible = "microchip,ksz9563" }, {}, }; MODULE_DEVICE_TABLE(of, ksz9477_dt_ids); diff --git a/drivers/net/dsa/microchip/ksz_common.c b/drivers/net/dsa/microchip/ksz_common.c index 9328b88849d2..39dace8e3512 100644 --- a/drivers/net/dsa/microchip/ksz_common.c +++ b/drivers/net/dsa/microchip/ksz_common.c @@ -453,7 +453,9 @@ int ksz_switch_register(struct ksz_device *dev, if (ret) return ret; - dev->interface = PHY_INTERFACE_MODE_MII; + /* Host port interface will be self detected, or specifically set in + * device tree. + */ if (dev->dev->of_node) { ret = of_get_phy_mode(dev->dev->of_node); if (ret >= 0) -- cgit v1.2.3-59-g8ed1b