From f7c05c3987dcfde9a4e8c2d533db013fabebca0d Mon Sep 17 00:00:00 2001 From: Yoshihiro Shimoda Date: Fri, 24 Sep 2021 16:55:56 +0900 Subject: can: rcar_can: fix suspend/resume If the driver was not opened, rcar_can_suspend() should not call clk_disable() because the clock was not enabled. Fixes: fd1159318e55 ("can: add Renesas R-Car CAN driver") Link: https://lore.kernel.org/all/20210924075556.223685-1-yoshihiro.shimoda.uh@renesas.com Cc: stable@vger.kernel.org Signed-off-by: Yoshihiro Shimoda Tested-by: Ayumi Nakamichi Reviewed-by: Ulrich Hecht Tested-by: Biju Das Signed-off-by: Marc Kleine-Budde --- drivers/net/can/rcar/rcar_can.c | 20 ++++++++++++-------- 1 file changed, 12 insertions(+), 8 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/can/rcar/rcar_can.c b/drivers/net/can/rcar/rcar_can.c index 00e4533c8bdd..8999ec9455ec 100644 --- a/drivers/net/can/rcar/rcar_can.c +++ b/drivers/net/can/rcar/rcar_can.c @@ -846,10 +846,12 @@ static int __maybe_unused rcar_can_suspend(struct device *dev) struct rcar_can_priv *priv = netdev_priv(ndev); u16 ctlr; - if (netif_running(ndev)) { - netif_stop_queue(ndev); - netif_device_detach(ndev); - } + if (!netif_running(ndev)) + return 0; + + netif_stop_queue(ndev); + netif_device_detach(ndev); + ctlr = readw(&priv->regs->ctlr); ctlr |= RCAR_CAN_CTLR_CANM_HALT; writew(ctlr, &priv->regs->ctlr); @@ -868,6 +870,9 @@ static int __maybe_unused rcar_can_resume(struct device *dev) u16 ctlr; int err; + if (!netif_running(ndev)) + return 0; + err = clk_enable(priv->clk); if (err) { netdev_err(ndev, "clk_enable() failed, error %d\n", err); @@ -881,10 +886,9 @@ static int __maybe_unused rcar_can_resume(struct device *dev) writew(ctlr, &priv->regs->ctlr); priv->can.state = CAN_STATE_ERROR_ACTIVE; - if (netif_running(ndev)) { - netif_device_attach(ndev); - netif_start_queue(ndev); - } + netif_device_attach(ndev); + netif_start_queue(ndev); + return 0; } -- cgit v1.3-18-gd494 From 99d173fbe8944861a00ebd1c73817a1260d21e60 Mon Sep 17 00:00:00 2001 From: Aswath Govindraju Date: Mon, 20 Sep 2021 18:03:43 +0530 Subject: can: m_can: fix iomap_read_fifo() and iomap_write_fifo() The read and writes from the fifo are from a buffer, with various fields and data at predefined offsets. So, they should not be done to the same address(or port) in case of val_count greater than 1. Therefore, fix this by using iowrite32()/ioread32() instead of ioread32_rep()/iowrite32_rep(). Also, the write into FIFO must be performed with an offset from the message ram base address. Therefore, fix the base address to mram_base. Fixes: e39381770ec9 ("can: m_can: Disable IRQs on FIFO bus errors") Link: https://lore.kernel.org/all/20210920123344.2320-1-a-govindraju@ti.com Signed-off-by: Aswath Govindraju Signed-off-by: Marc Kleine-Budde --- drivers/net/can/m_can/m_can_platform.c | 14 ++++++++++++-- 1 file changed, 12 insertions(+), 2 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/can/m_can/m_can_platform.c b/drivers/net/can/m_can/m_can_platform.c index 308d4f2fff00..eee47bad0592 100644 --- a/drivers/net/can/m_can/m_can_platform.c +++ b/drivers/net/can/m_can/m_can_platform.c @@ -32,8 +32,13 @@ static u32 iomap_read_reg(struct m_can_classdev *cdev, int reg) static int iomap_read_fifo(struct m_can_classdev *cdev, int offset, void *val, size_t val_count) { struct m_can_plat_priv *priv = cdev_to_priv(cdev); + void __iomem *src = priv->mram_base + offset; - ioread32_rep(priv->mram_base + offset, val, val_count); + while (val_count--) { + *(unsigned int *)val = ioread32(src); + val += 4; + src += 4; + } return 0; } @@ -51,8 +56,13 @@ static int iomap_write_fifo(struct m_can_classdev *cdev, int offset, const void *val, size_t val_count) { struct m_can_plat_priv *priv = cdev_to_priv(cdev); + void __iomem *dst = priv->mram_base + offset; - iowrite32_rep(priv->base + offset, val, val_count); + while (val_count--) { + iowrite32(*(unsigned int *)val, dst); + val += 4; + dst += 4; + } return 0; } -- cgit v1.3-18-gd494 From 949fe9b35570361bc6ee2652f89a0561b26eec98 Mon Sep 17 00:00:00 2001 From: Zheyu Ma Date: Thu, 14 Oct 2021 06:28:33 +0000 Subject: can: peak_pci: peak_pci_remove(): fix UAF When remove the module peek_pci, referencing 'chan' again after releasing 'dev' will cause UAF. Fix this by releasing 'dev' later. The following log reveals it: [ 35.961814 ] BUG: KASAN: use-after-free in peak_pci_remove+0x16f/0x270 [peak_pci] [ 35.963414 ] Read of size 8 at addr ffff888136998ee8 by task modprobe/5537 [ 35.965513 ] Call Trace: [ 35.965718 ] dump_stack_lvl+0xa8/0xd1 [ 35.966028 ] print_address_description+0x87/0x3b0 [ 35.966420 ] kasan_report+0x172/0x1c0 [ 35.966725 ] ? peak_pci_remove+0x16f/0x270 [peak_pci] [ 35.967137 ] ? trace_irq_enable_rcuidle+0x10/0x170 [ 35.967529 ] ? peak_pci_remove+0x16f/0x270 [peak_pci] [ 35.967945 ] __asan_report_load8_noabort+0x14/0x20 [ 35.968346 ] peak_pci_remove+0x16f/0x270 [peak_pci] [ 35.968752 ] pci_device_remove+0xa9/0x250 Fixes: e6d9c80b7ca1 ("can: peak_pci: add support of some new PEAK-System PCI cards") Link: https://lore.kernel.org/all/1634192913-15639-1-git-send-email-zheyuma97@gmail.com Cc: stable@vger.kernel.org Signed-off-by: Zheyu Ma Signed-off-by: Marc Kleine-Budde --- drivers/net/can/sja1000/peak_pci.c | 9 ++++----- 1 file changed, 4 insertions(+), 5 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/can/sja1000/peak_pci.c b/drivers/net/can/sja1000/peak_pci.c index 6db90dc4bc9d..84f34020aafb 100644 --- a/drivers/net/can/sja1000/peak_pci.c +++ b/drivers/net/can/sja1000/peak_pci.c @@ -752,16 +752,15 @@ static void peak_pci_remove(struct pci_dev *pdev) struct net_device *prev_dev = chan->prev_dev; dev_info(&pdev->dev, "removing device %s\n", dev->name); + /* do that only for first channel */ + if (!prev_dev && chan->pciec_card) + peak_pciec_remove(chan->pciec_card); unregister_sja1000dev(dev); free_sja1000dev(dev); dev = prev_dev; - if (!dev) { - /* do that only for first channel */ - if (chan->pciec_card) - peak_pciec_remove(chan->pciec_card); + if (!dev) break; - } priv = netdev_priv(dev); chan = priv->priv; } -- cgit v1.3-18-gd494 From 3d031abc7e7249573148871180c28ecedb5e27df Mon Sep 17 00:00:00 2001 From: Stephane Grosjean Date: Wed, 29 Sep 2021 16:21:10 +0200 Subject: can: peak_usb: pcan_usb_fd_decode_status(): fix back to ERROR_ACTIVE state notification This corrects the lack of notification of a return to ERROR_ACTIVE state for USB - CANFD devices from PEAK-System. Fixes: 0a25e1f4f185 ("can: peak_usb: add support for PEAK new CANFD USB adapters") Link: https://lore.kernel.org/all/20210929142111.55757-1-s.grosjean@peak-system.com Cc: stable@vger.kernel.org Signed-off-by: Stephane Grosjean Signed-off-by: Marc Kleine-Budde --- drivers/net/can/usb/peak_usb/pcan_usb_fd.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/can/usb/peak_usb/pcan_usb_fd.c b/drivers/net/can/usb/peak_usb/pcan_usb_fd.c index b11eabad575b..e206959b3d06 100644 --- a/drivers/net/can/usb/peak_usb/pcan_usb_fd.c +++ b/drivers/net/can/usb/peak_usb/pcan_usb_fd.c @@ -551,11 +551,10 @@ static int pcan_usb_fd_decode_status(struct pcan_usb_fd_if *usb_if, } else if (sm->channel_p_w_b & PUCAN_BUS_WARNING) { new_state = CAN_STATE_ERROR_WARNING; } else { - /* no error bit (so, no error skb, back to active state) */ - dev->can.state = CAN_STATE_ERROR_ACTIVE; + /* back to (or still in) ERROR_ACTIVE state */ + new_state = CAN_STATE_ERROR_ACTIVE; pdev->bec.txerr = 0; pdev->bec.rxerr = 0; - return 0; } /* state hasn't changed */ -- cgit v1.3-18-gd494 From 553715feaa9e0453bc59f6ba20e1c69346888bd5 Mon Sep 17 00:00:00 2001 From: Stephane Grosjean Date: Wed, 29 Sep 2021 16:21:11 +0200 Subject: can: peak_usb: pcan_usb_fd_decode_status(): remove unnecessary test on the nullity of a pointer Since alloc_can_err_skb() puts NULL in cf in the case when skb cannot be allocated and can_change_state() handles the case when cf is NULL, the test on the nullity of skb is now unnecessary. Link: https://lore.kernel.org/all/20210929142111.55757-2-s.grosjean@peak-system.com Signed-off-by: Stephane Grosjean Signed-off-by: Marc Kleine-Budde --- drivers/net/can/usb/peak_usb/pcan_usb_fd.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/can/usb/peak_usb/pcan_usb_fd.c b/drivers/net/can/usb/peak_usb/pcan_usb_fd.c index e206959b3d06..09029a3bad1a 100644 --- a/drivers/net/can/usb/peak_usb/pcan_usb_fd.c +++ b/drivers/net/can/usb/peak_usb/pcan_usb_fd.c @@ -567,8 +567,7 @@ static int pcan_usb_fd_decode_status(struct pcan_usb_fd_if *usb_if, /* allocate an skb to store the error frame */ skb = alloc_can_err_skb(netdev, &cf); - if (skb) - can_change_state(netdev, cf, tx_state, rx_state); + can_change_state(netdev, cf, tx_state, rx_state); /* things must be done even in case of OOM */ if (new_state == CAN_STATE_BUS_OFF) -- cgit v1.3-18-gd494