From 9a3fcf912ef7f5c6e18f9af6875dd13f7311f7aa Mon Sep 17 00:00:00 2001 From: Sara Sharon Date: Tue, 14 Mar 2017 09:50:35 +0200 Subject: iwlwifi: mvm: cleanup pending frames in DQA mode When a station is asleep, the fw will set it as "asleep". All queues that are used only by one station will be stopped by the fw. In pre-DQA mode this was relevant for aggregation queues. However, in DQA mode a queue is owned by one station only, so all queues will be stopped. As a result, we don't expect to get filtered frames back to mac80211 and don't have to maintain the entire pending_frames state logic, the same way as we do in aggregations. The correct behavior is to align DQA behavior with the aggregation queue behaviour pre-DQA: - Don't count pending frames. - Let mac80211 know we have frames in these queues so that it can properly handle trigger frames. When a trigger frame is received, mac80211 tells the driver to send frames from the queues using release_buffered_frames. The driver will tell the fw to let frames out even if the station is asleep. This is done by iwl_mvm_sta_modify_sleep_tx_count. Reported-and-tested-by: Jens Axboe Reported-by: Linus Torvalds Signed-off-by: Sara Sharon Signed-off-by: Luca Coelho Signed-off-by: Kalle Valo --- drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c | 5 +-- drivers/net/wireless/intel/iwlwifi/mvm/sta.c | 11 +++--- drivers/net/wireless/intel/iwlwifi/mvm/sta.h | 2 +- drivers/net/wireless/intel/iwlwifi/mvm/tx.c | 41 ++++++++++------------- 4 files changed, 28 insertions(+), 31 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c b/drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c index d37b1695c64e..6927caecd48e 100644 --- a/drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c +++ b/drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c @@ -2319,7 +2319,7 @@ iwl_mvm_mac_release_buffered_frames(struct ieee80211_hw *hw, { struct iwl_mvm *mvm = IWL_MAC80211_GET_MVM(hw); - /* Called when we need to transmit (a) frame(s) from agg queue */ + /* Called when we need to transmit (a) frame(s) from agg or dqa queue */ iwl_mvm_sta_modify_sleep_tx_count(mvm, sta, reason, num_frames, tids, more_data, true); @@ -2338,7 +2338,8 @@ static void __iwl_mvm_mac_sta_notify(struct ieee80211_hw *hw, for (tid = 0; tid < IWL_MAX_TID_COUNT; tid++) { struct iwl_mvm_tid_data *tid_data = &mvmsta->tid_data[tid]; - if (tid_data->state != IWL_AGG_ON && + if (!iwl_mvm_is_dqa_supported(mvm) && + tid_data->state != IWL_AGG_ON && tid_data->state != IWL_EMPTYING_HW_QUEUE_DELBA) continue; diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/sta.c b/drivers/net/wireless/intel/iwlwifi/mvm/sta.c index bd1dcc863d8f..b51a2853cc80 100644 --- a/drivers/net/wireless/intel/iwlwifi/mvm/sta.c +++ b/drivers/net/wireless/intel/iwlwifi/mvm/sta.c @@ -3135,7 +3135,7 @@ void iwl_mvm_sta_modify_sleep_tx_count(struct iwl_mvm *mvm, struct ieee80211_sta *sta, enum ieee80211_frame_release_type reason, u16 cnt, u16 tids, bool more_data, - bool agg) + bool single_sta_queue) { struct iwl_mvm_sta *mvmsta = iwl_mvm_sta_from_mac80211(sta); struct iwl_mvm_add_sta_cmd cmd = { @@ -3155,14 +3155,14 @@ void iwl_mvm_sta_modify_sleep_tx_count(struct iwl_mvm *mvm, for_each_set_bit(tid, &_tids, IWL_MAX_TID_COUNT) cmd.awake_acs |= BIT(tid_to_ucode_ac[tid]); - /* If we're releasing frames from aggregation queues then check if the - * all queues combined that we're releasing frames from have + /* If we're releasing frames from aggregation or dqa queues then check + * if all the queues that we're releasing frames from, combined, have: * - more frames than the service period, in which case more_data * needs to be set * - fewer than 'cnt' frames, in which case we need to adjust the * firmware command (but do that unconditionally) */ - if (agg) { + if (single_sta_queue) { int remaining = cnt; int sleep_tx_count; @@ -3172,7 +3172,8 @@ void iwl_mvm_sta_modify_sleep_tx_count(struct iwl_mvm *mvm, u16 n_queued; tid_data = &mvmsta->tid_data[tid]; - if (WARN(tid_data->state != IWL_AGG_ON && + if (WARN(!iwl_mvm_is_dqa_supported(mvm) && + tid_data->state != IWL_AGG_ON && tid_data->state != IWL_EMPTYING_HW_QUEUE_DELBA, "TID %d state is %d\n", tid, tid_data->state)) { diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/sta.h b/drivers/net/wireless/intel/iwlwifi/mvm/sta.h index 4be34f902278..1927ce607798 100644 --- a/drivers/net/wireless/intel/iwlwifi/mvm/sta.h +++ b/drivers/net/wireless/intel/iwlwifi/mvm/sta.h @@ -547,7 +547,7 @@ void iwl_mvm_sta_modify_sleep_tx_count(struct iwl_mvm *mvm, struct ieee80211_sta *sta, enum ieee80211_frame_release_type reason, u16 cnt, u16 tids, bool more_data, - bool agg); + bool single_sta_queue); int iwl_mvm_drain_sta(struct iwl_mvm *mvm, struct iwl_mvm_sta *mvmsta, bool drain); void iwl_mvm_sta_modify_disable_tx(struct iwl_mvm *mvm, diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/tx.c b/drivers/net/wireless/intel/iwlwifi/mvm/tx.c index dd2b4a300819..3f37075f4cde 100644 --- a/drivers/net/wireless/intel/iwlwifi/mvm/tx.c +++ b/drivers/net/wireless/intel/iwlwifi/mvm/tx.c @@ -7,7 +7,7 @@ * * Copyright(c) 2012 - 2014 Intel Corporation. All rights reserved. * Copyright(c) 2013 - 2015 Intel Mobile Communications GmbH - * Copyright(c) 2016 Intel Deutschland GmbH + * Copyright(c) 2016 - 2017 Intel Deutschland GmbH * * This program is free software; you can redistribute it and/or modify * it under the terms of version 2 of the GNU General Public License as @@ -34,6 +34,7 @@ * * Copyright(c) 2012 - 2014 Intel Corporation. All rights reserved. * Copyright(c) 2013 - 2015 Intel Mobile Communications GmbH + * Copyright(c) 2016 - 2017 Intel Deutschland GmbH * All rights reserved. * * Redistribution and use in source and binary forms, with or without @@ -628,8 +629,10 @@ int iwl_mvm_tx_skb_non_sta(struct iwl_mvm *mvm, struct sk_buff *skb) * values. * Note that we don't need to make sure it isn't agg'd, since we're * TXing non-sta + * For DQA mode - we shouldn't increase it though */ - atomic_inc(&mvm->pending_frames[sta_id]); + if (!iwl_mvm_is_dqa_supported(mvm)) + atomic_inc(&mvm->pending_frames[sta_id]); return 0; } @@ -1005,11 +1008,8 @@ static int iwl_mvm_tx_mpdu(struct iwl_mvm *mvm, struct sk_buff *skb, spin_unlock(&mvmsta->lock); - /* Increase pending frames count if this isn't AMPDU */ - if ((iwl_mvm_is_dqa_supported(mvm) && - mvmsta->tid_data[tx_cmd->tid_tspec].state != IWL_AGG_ON && - mvmsta->tid_data[tx_cmd->tid_tspec].state != IWL_AGG_STARTING) || - (!iwl_mvm_is_dqa_supported(mvm) && !is_ampdu)) + /* Increase pending frames count if this isn't AMPDU or DQA queue */ + if (!iwl_mvm_is_dqa_supported(mvm) && !is_ampdu) atomic_inc(&mvm->pending_frames[mvmsta->sta_id]); return 0; @@ -1079,12 +1079,13 @@ static void iwl_mvm_check_ratid_empty(struct iwl_mvm *mvm, lockdep_assert_held(&mvmsta->lock); if ((tid_data->state == IWL_AGG_ON || - tid_data->state == IWL_EMPTYING_HW_QUEUE_DELBA) && + tid_data->state == IWL_EMPTYING_HW_QUEUE_DELBA || + iwl_mvm_is_dqa_supported(mvm)) && iwl_mvm_tid_queued(tid_data) == 0) { /* - * Now that this aggregation queue is empty tell mac80211 so it - * knows we no longer have frames buffered for the station on - * this TID (for the TIM bitmap calculation.) + * Now that this aggregation or DQA queue is empty tell + * mac80211 so it knows we no longer have frames buffered for + * the station on this TID (for the TIM bitmap calculation.) */ ieee80211_sta_set_buffered(sta, tid, false); } @@ -1257,7 +1258,6 @@ static void iwl_mvm_rx_tx_cmd_single(struct iwl_mvm *mvm, u8 skb_freed = 0; u16 next_reclaimed, seq_ctl; bool is_ndp = false; - bool txq_agg = false; /* Is this TXQ aggregated */ __skb_queue_head_init(&skbs); @@ -1283,6 +1283,10 @@ static void iwl_mvm_rx_tx_cmd_single(struct iwl_mvm *mvm, info->flags |= IEEE80211_TX_STAT_ACK; break; case TX_STATUS_FAIL_DEST_PS: + /* In DQA, the FW should have stopped the queue and not + * return this status + */ + WARN_ON(iwl_mvm_is_dqa_supported(mvm)); info->flags |= IEEE80211_TX_STAT_TX_FILTERED; break; default: @@ -1387,15 +1391,6 @@ static void iwl_mvm_rx_tx_cmd_single(struct iwl_mvm *mvm, bool send_eosp_ndp = false; spin_lock_bh(&mvmsta->lock); - if (iwl_mvm_is_dqa_supported(mvm)) { - enum iwl_mvm_agg_state state; - - state = mvmsta->tid_data[tid].state; - txq_agg = (state == IWL_AGG_ON || - state == IWL_EMPTYING_HW_QUEUE_DELBA); - } else { - txq_agg = txq_id >= mvm->first_agg_queue; - } if (!is_ndp) { tid_data->next_reclaimed = next_reclaimed; @@ -1452,11 +1447,11 @@ static void iwl_mvm_rx_tx_cmd_single(struct iwl_mvm *mvm, * If the txq is not an AMPDU queue, there is no chance we freed * several skbs. Check that out... */ - if (txq_agg) + if (iwl_mvm_is_dqa_supported(mvm) || txq_id >= mvm->first_agg_queue) goto out; /* We can't free more than one frame at once on a shared queue */ - WARN_ON(!iwl_mvm_is_dqa_supported(mvm) && (skb_freed > 1)); + WARN_ON(skb_freed > 1); /* If we have still frames for this STA nothing to do here */ if (!atomic_sub_and_test(skb_freed, &mvm->pending_frames[sta_id])) -- cgit v1.2.3-59-g8ed1b From 4e841d3eb9294ce4137fdb5d0a88f1bceab9c212 Mon Sep 17 00:00:00 2001 From: Brian Norris Date: Fri, 10 Mar 2017 17:39:21 -0800 Subject: mwifiex: pcie: don't leak DMA buffers when removing When PCIe FLR support was added, much of the remove/release code for PCIe was migrated to ->down_dev(), but ->down_dev() is never called for device removal. Let's refactor the cleanup to be done in both cases. Also, drop the comments above mwifiex_cleanup_pcie(), because they were clearly wrong, and it's better to have clear and obvious code than to detail the code steps in comments anyway. Fixes: 4c5dae59d2e9 ("mwifiex: add PCIe function level reset support") Cc: Signed-off-by: Brian Norris Signed-off-by: Kalle Valo --- drivers/net/wireless/marvell/mwifiex/pcie.c | 38 ++++++++++++++--------------- 1 file changed, 19 insertions(+), 19 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/marvell/mwifiex/pcie.c b/drivers/net/wireless/marvell/mwifiex/pcie.c index a0d918094889..b8c990d10d6e 100644 --- a/drivers/net/wireless/marvell/mwifiex/pcie.c +++ b/drivers/net/wireless/marvell/mwifiex/pcie.c @@ -2739,6 +2739,21 @@ static void mwifiex_pcie_device_dump(struct mwifiex_adapter *adapter) schedule_work(&card->work); } +static void mwifiex_pcie_free_buffers(struct mwifiex_adapter *adapter) +{ + struct pcie_service_card *card = adapter->card; + const struct mwifiex_pcie_card_reg *reg = card->pcie.reg; + + if (reg->sleep_cookie) + mwifiex_pcie_delete_sleep_cookie_buf(adapter); + + mwifiex_pcie_delete_cmdrsp_buf(adapter); + mwifiex_pcie_delete_evtbd_ring(adapter); + mwifiex_pcie_delete_rxbd_ring(adapter); + mwifiex_pcie_delete_txbd_ring(adapter); + card->cmdrsp_buf = NULL; +} + /* * This function initializes the PCI-E host memory space, WCB rings, etc. * @@ -2850,13 +2865,6 @@ err_enable_dev: /* * This function cleans up the allocated card buffers. - * - * The following are freed by this function - - * - TXBD ring buffers - * - RXBD ring buffers - * - Event BD ring buffers - * - Command response ring buffer - * - Sleep cookie buffer */ static void mwifiex_cleanup_pcie(struct mwifiex_adapter *adapter) { @@ -2875,6 +2883,8 @@ static void mwifiex_cleanup_pcie(struct mwifiex_adapter *adapter) "Failed to write driver not-ready signature\n"); } + mwifiex_pcie_free_buffers(adapter); + if (pdev) { pci_iounmap(pdev, card->pci_mmap); pci_iounmap(pdev, card->pci_mmap1); @@ -3126,10 +3136,7 @@ err_cre_txbd: pci_iounmap(pdev, card->pci_mmap1); } -/* This function cleans up the PCI-E host memory space. - * Some code is extracted from mwifiex_unregister_dev() - * - */ +/* This function cleans up the PCI-E host memory space. */ static void mwifiex_pcie_down_dev(struct mwifiex_adapter *adapter) { struct pcie_service_card *card = adapter->card; @@ -3140,14 +3147,7 @@ static void mwifiex_pcie_down_dev(struct mwifiex_adapter *adapter) adapter->seq_num = 0; - if (reg->sleep_cookie) - mwifiex_pcie_delete_sleep_cookie_buf(adapter); - - mwifiex_pcie_delete_cmdrsp_buf(adapter); - mwifiex_pcie_delete_evtbd_ring(adapter); - mwifiex_pcie_delete_rxbd_ring(adapter); - mwifiex_pcie_delete_txbd_ring(adapter); - card->cmdrsp_buf = NULL; + mwifiex_pcie_free_buffers(adapter); } static struct mwifiex_if_ops pcie_ops = { -- cgit v1.2.3-59-g8ed1b From ba1c7e45ec224cc8d2df33ecaee1946d48e79231 Mon Sep 17 00:00:00 2001 From: Brian Norris Date: Fri, 10 Mar 2017 17:39:22 -0800 Subject: mwifiex: set adapter->dev before starting to use mwifiex_dbg() The mwifiex_dbg() log handler utilizes the struct device in adapter->dev. Without it, it decides not to print anything. As of commit 2e02b5814217 ("mwifiex: Allow mwifiex early access to device structure"), we started assigning that pointer only after we finished mwifiex_register() -- this effectively neuters any mwifiex_dbg() logging done before this point. Let's move the device assignment into mwifiex_register(). Fixes: 2e02b5814217 ("mwifiex: Allow mwifiex early access to device structure") Cc: Rajat Jain Signed-off-by: Brian Norris Signed-off-by: Kalle Valo --- drivers/net/wireless/marvell/mwifiex/main.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/marvell/mwifiex/main.c b/drivers/net/wireless/marvell/mwifiex/main.c index 5ebca1d0cfc7..43d040e02e4d 100644 --- a/drivers/net/wireless/marvell/mwifiex/main.c +++ b/drivers/net/wireless/marvell/mwifiex/main.c @@ -57,8 +57,8 @@ MODULE_PARM_DESC(mfg_mode, "manufacturing mode enable:1, disable:0"); * In case of any errors during inittialization, this function also ensures * proper cleanup before exiting. */ -static int mwifiex_register(void *card, struct mwifiex_if_ops *if_ops, - void **padapter) +static int mwifiex_register(void *card, struct device *dev, + struct mwifiex_if_ops *if_ops, void **padapter) { struct mwifiex_adapter *adapter; int i; @@ -68,6 +68,7 @@ static int mwifiex_register(void *card, struct mwifiex_if_ops *if_ops, return -ENOMEM; *padapter = adapter; + adapter->dev = dev; adapter->card = card; /* Save interface specific operations in adapter */ @@ -1568,12 +1569,11 @@ mwifiex_add_card(void *card, struct completion *fw_done, { struct mwifiex_adapter *adapter; - if (mwifiex_register(card, if_ops, (void **)&adapter)) { + if (mwifiex_register(card, dev, if_ops, (void **)&adapter)) { pr_err("%s: software init failed\n", __func__); goto err_init_sw; } - adapter->dev = dev; mwifiex_probe_of(adapter); adapter->iface_type = iface_type; -- cgit v1.2.3-59-g8ed1b From 36908c4e5b1063eff3e11336fab544a76c625b69 Mon Sep 17 00:00:00 2001 From: Brian Norris Date: Fri, 10 Mar 2017 17:39:23 -0800 Subject: mwifiex: uninit wakeup info when removing device We manually init wakeup info, but we don't detach it on device removal. This means that if we (for example) rmmod + modprobe the driver, the device framework might return -EEXIST the second time, and we'll complain in the logs: [ 839.311881] mwifiex_pcie 0000:01:00.0: fail to init wakeup for mwifiex AFAICT, there's no other negative effect. But we can fix this by disabling wakeup on remove, similar to what a few other drivers do (e.g., the power supply framework). This code (and bug) has existed on SDIO for a while, but it got moved around and enabled for PCIe with commit 853402a00823 ("mwifiex: Enable WoWLAN for both sdio and pcie"). Signed-off-by: Brian Norris Signed-off-by: Kalle Valo --- drivers/net/wireless/marvell/mwifiex/main.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers/net') diff --git a/drivers/net/wireless/marvell/mwifiex/main.c b/drivers/net/wireless/marvell/mwifiex/main.c index 43d040e02e4d..b62e03d11c2e 100644 --- a/drivers/net/wireless/marvell/mwifiex/main.c +++ b/drivers/net/wireless/marvell/mwifiex/main.c @@ -1718,6 +1718,9 @@ int mwifiex_remove_card(struct mwifiex_adapter *adapter) wiphy_unregister(adapter->wiphy); wiphy_free(adapter->wiphy); + if (adapter->irq_wakeup >= 0) + device_init_wakeup(adapter->dev, false); + /* Unregister device */ mwifiex_dbg(adapter, INFO, "info: unregister device\n"); -- cgit v1.2.3-59-g8ed1b From 6be3b6cce1e225f189b68b4e84fc711d19b4277b Mon Sep 17 00:00:00 2001 From: Ryan Hsu Date: Mon, 13 Mar 2017 15:49:03 -0700 Subject: ath10k: fix incorrect wlan_mac_base in qca6174_regs In the 'commit ebee76f7fa46 ("ath10k: allow setting coverage class")', it inherits the design and the address offset from ath9k, but the address is not applicable to QCA6174, which leads to a random crash while doing the resume() operation, since the set_coverage_class.ops will be called from ieee80211_reconfig() when resume() (if the wow is not configured). Fix the incorrect address offset here to avoid the random crash. Verified on QCA6174/hw3.0 with firmware WLAN.RM.4.4-00022-QCARMSWPZ-2. kvalo: this also seems to fix a regression with firmware restart. Fixes: ebee76f7fa46 ("ath10k: allow setting coverage class") Cc: # v4.10 Signed-off-by: Ryan Hsu Signed-off-by: Kalle Valo --- drivers/net/wireless/ath/ath10k/hw.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/ath/ath10k/hw.c b/drivers/net/wireless/ath/ath10k/hw.c index 33fb26833cd0..d9f37ee4bfdd 100644 --- a/drivers/net/wireless/ath/ath10k/hw.c +++ b/drivers/net/wireless/ath/ath10k/hw.c @@ -51,7 +51,7 @@ const struct ath10k_hw_regs qca6174_regs = { .rtc_soc_base_address = 0x00000800, .rtc_wmac_base_address = 0x00001000, .soc_core_base_address = 0x0003a000, - .wlan_mac_base_address = 0x00020000, + .wlan_mac_base_address = 0x00010000, .ce_wrapper_base_address = 0x00034000, .ce0_base_address = 0x00034400, .ce1_base_address = 0x00034800, -- cgit v1.2.3-59-g8ed1b