From e72701acbe0b35e52d3f04d442837c06b4e64f1c Mon Sep 17 00:00:00 2001 From: Anton Vorontsov Date: Wed, 14 Oct 2009 14:54:52 -0700 Subject: net: Fix OF platform drivers coldplug/hotplug when compiled as modules Some OF platform drivers are missing module device tables, so they won't load automatically on boot. This patch fixes the issue by adding proper MODULE_DEVICE_TABLE() macros to the drivers. Signed-off-by: Anton Vorontsov Signed-off-by: David S. Miller --- drivers/net/can/sja1000/sja1000_of_platform.c | 1 + drivers/net/fec_mpc52xx_phy.c | 1 + drivers/net/fs_enet/fs_enet-main.c | 1 + drivers/net/fs_enet/mii-bitbang.c | 1 + drivers/net/fs_enet/mii-fec.c | 1 + drivers/net/fsl_pq_mdio.c | 1 + drivers/net/gianfar.c | 4 +--- drivers/net/ibm_newemac/core.c | 2 ++ drivers/net/phy/mdio-gpio.c | 1 + 9 files changed, 10 insertions(+), 3 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/can/sja1000/sja1000_of_platform.c b/drivers/net/can/sja1000/sja1000_of_platform.c index 3373560405ba..9dd076a626a5 100644 --- a/drivers/net/can/sja1000/sja1000_of_platform.c +++ b/drivers/net/can/sja1000/sja1000_of_platform.c @@ -213,6 +213,7 @@ static struct of_device_id __devinitdata sja1000_ofp_table[] = { {.compatible = "nxp,sja1000"}, {}, }; +MODULE_DEVICE_TABLE(of, sja1000_ofp_table); static struct of_platform_driver sja1000_ofp_driver = { .owner = THIS_MODULE, diff --git a/drivers/net/fec_mpc52xx_phy.c b/drivers/net/fec_mpc52xx_phy.c index 31e6d62b785d..ee0f3c6d3f88 100644 --- a/drivers/net/fec_mpc52xx_phy.c +++ b/drivers/net/fec_mpc52xx_phy.c @@ -155,6 +155,7 @@ static struct of_device_id mpc52xx_fec_mdio_match[] = { { .compatible = "mpc5200b-fec-phy", }, {} }; +MODULE_DEVICE_TABLE(of, mpc52xx_fec_mdio_match); struct of_platform_driver mpc52xx_fec_mdio_driver = { .name = "mpc5200b-fec-phy", diff --git a/drivers/net/fs_enet/fs_enet-main.c b/drivers/net/fs_enet/fs_enet-main.c index 2bc2d2b20644..ec2f5034457f 100644 --- a/drivers/net/fs_enet/fs_enet-main.c +++ b/drivers/net/fs_enet/fs_enet-main.c @@ -1110,6 +1110,7 @@ static struct of_device_id fs_enet_match[] = { #endif {} }; +MODULE_DEVICE_TABLE(of, fs_enet_match); static struct of_platform_driver fs_enet_driver = { .name = "fs_enet", diff --git a/drivers/net/fs_enet/mii-bitbang.c b/drivers/net/fs_enet/mii-bitbang.c index 93b481b0e3c7..24ff9f43a62b 100644 --- a/drivers/net/fs_enet/mii-bitbang.c +++ b/drivers/net/fs_enet/mii-bitbang.c @@ -221,6 +221,7 @@ static struct of_device_id fs_enet_mdio_bb_match[] = { }, {}, }; +MODULE_DEVICE_TABLE(of, fs_enet_mdio_bb_match); static struct of_platform_driver fs_enet_bb_mdio_driver = { .name = "fsl-bb-mdio", diff --git a/drivers/net/fs_enet/mii-fec.c b/drivers/net/fs_enet/mii-fec.c index a2d69c1cd07e..96eba4280c5c 100644 --- a/drivers/net/fs_enet/mii-fec.c +++ b/drivers/net/fs_enet/mii-fec.c @@ -219,6 +219,7 @@ static struct of_device_id fs_enet_mdio_fec_match[] = { #endif {}, }; +MODULE_DEVICE_TABLE(of, fs_enet_mdio_fec_match); static struct of_platform_driver fs_enet_fec_mdio_driver = { .name = "fsl-fec-mdio", diff --git a/drivers/net/fsl_pq_mdio.c b/drivers/net/fsl_pq_mdio.c index d167090248e2..6ac464866972 100644 --- a/drivers/net/fsl_pq_mdio.c +++ b/drivers/net/fsl_pq_mdio.c @@ -407,6 +407,7 @@ static struct of_device_id fsl_pq_mdio_match[] = { }, {}, }; +MODULE_DEVICE_TABLE(of, fsl_pq_mdio_match); static struct of_platform_driver fsl_pq_mdio_driver = { .name = "fsl-pq_mdio", diff --git a/drivers/net/gianfar.c b/drivers/net/gianfar.c index 1e5289ffef6f..5bf31f1509c9 100644 --- a/drivers/net/gianfar.c +++ b/drivers/net/gianfar.c @@ -2325,9 +2325,6 @@ static irqreturn_t gfar_error(int irq, void *dev_id) return IRQ_HANDLED; } -/* work with hotplug and coldplug */ -MODULE_ALIAS("platform:fsl-gianfar"); - static struct of_device_id gfar_match[] = { { @@ -2336,6 +2333,7 @@ static struct of_device_id gfar_match[] = }, {}, }; +MODULE_DEVICE_TABLE(of, gfar_match); /* Structure for a device driver */ static struct of_platform_driver gfar_driver = { diff --git a/drivers/net/ibm_newemac/core.c b/drivers/net/ibm_newemac/core.c index c6591cb0aae0..3fae87559791 100644 --- a/drivers/net/ibm_newemac/core.c +++ b/drivers/net/ibm_newemac/core.c @@ -24,6 +24,7 @@ * */ +#include #include #include #include @@ -2988,6 +2989,7 @@ static struct of_device_id emac_match[] = }, {}, }; +MODULE_DEVICE_TABLE(of, emac_match); static struct of_platform_driver emac_driver = { .name = "emac", diff --git a/drivers/net/phy/mdio-gpio.c b/drivers/net/phy/mdio-gpio.c index 250e10f2c35b..8659d341e769 100644 --- a/drivers/net/phy/mdio-gpio.c +++ b/drivers/net/phy/mdio-gpio.c @@ -238,6 +238,7 @@ static struct of_device_id mdio_ofgpio_match[] = { }, {}, }; +MODULE_DEVICE_TABLE(of, mdio_ofgpio_match); static struct of_platform_driver mdio_ofgpio_driver = { .name = "mdio-gpio", -- cgit v1.2.3-59-g8ed1b From 37ccd92f55c6c6c23f2b4a7c8830b313b70da0ed Mon Sep 17 00:00:00 2001 From: John Bonesio Date: Wed, 14 Oct 2009 15:10:19 -0700 Subject: net/fec_mpc52xx: Fix kernel panic on FEC error The MDIO bus cannot be accessed at interrupt context, but on an FEC error, the fec_mpc52xx driver reset function also tries to reset the PHY. Since the error is detected at IRQ context, and the PHY functions try to sleep, the kernel ends up panicking. Resetting the PHY on an FEC error isn't even necessary. This patch solves the problem by removing the PHY reset entirely. Signed-off-by: John Bonesio Signed-off-by: Grant Likely Signed-off-by: David S. Miller --- drivers/net/fec_mpc52xx.c | 6 ------ 1 file changed, 6 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/fec_mpc52xx.c b/drivers/net/fec_mpc52xx.c index c40113f58963..66dace6d324f 100644 --- a/drivers/net/fec_mpc52xx.c +++ b/drivers/net/fec_mpc52xx.c @@ -759,12 +759,6 @@ static void mpc52xx_fec_reset(struct net_device *dev) mpc52xx_fec_hw_init(dev); - if (priv->phydev) { - phy_stop(priv->phydev); - phy_write(priv->phydev, MII_BMCR, BMCR_RESET); - phy_start(priv->phydev); - } - bcom_fec_rx_reset(priv->rx_dmatsk); bcom_fec_tx_reset(priv->tx_dmatsk); -- cgit v1.2.3-59-g8ed1b From 47a01a0c94a3ff1716adb5f37b83975550e1ebbb Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Wed, 14 Oct 2009 15:10:58 -0700 Subject: net: ks8851_mll uses mii interfaces From: Randy Dunlap ks8851_mll uses mii interfaces so it needs to select MII. ks8851_mll.c:(.text+0xf95ac): undefined reference to `generic_mii_ioctl' ks8851_mll.c:(.text+0xf96a0): undefined reference to `mii_ethtool_gset' ks8851_mll.c:(.text+0xf96fa): undefined reference to `mii_ethtool_sset' ks8851_mll.c:(.text+0xf9754): undefined reference to `mii_link_ok' ks8851_mll.c:(.text+0xf97ae): undefined reference to `mii_nway_restart' Signed-off-by: Randy Dunlap Signed-off-by: David S. Miller --- drivers/net/Kconfig | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers/net') diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index 9789de234130..f520e3ae1941 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -1741,6 +1741,7 @@ config KS8851 config KS8851_MLL tristate "Micrel KS8851 MLL" depends on HAS_IOMEM + select MII help This platform driver is for Micrel KS8851 Address/data bus multiplexed network chip. -- cgit v1.2.3-59-g8ed1b From 47dd7a540b8a0cdc028914b7351fca0cf0a1d305 Mon Sep 17 00:00:00 2001 From: Giuseppe Cavallaro Date: Wed, 14 Oct 2009 15:13:45 -0700 Subject: net: add support for STMicroelectronics Ethernet controllers. This is the driver for the ST MAC 10/100/1000 on-chip Ethernet controllers (Synopsys IP blocks). Driver documentation: o http://stlinux.com/drupal/kernel/network/stmmac Revisions: o http://stlinux.com/drupal/kernel/network/stmmac-driver-revisions Performances: o http://stlinux.com/drupal/benchmarks/networking/stmmac Signed-off-by: Giuseppe Cavallaro Signed-off-by: David S. Miller --- drivers/net/Kconfig | 2 + drivers/net/Makefile | 1 + drivers/net/stmmac/Kconfig | 53 + drivers/net/stmmac/Makefile | 4 + drivers/net/stmmac/common.h | 330 ++++++ drivers/net/stmmac/descs.h | 163 +++ drivers/net/stmmac/gmac.c | 693 +++++++++++ drivers/net/stmmac/gmac.h | 204 ++++ drivers/net/stmmac/mac100.c | 517 ++++++++ drivers/net/stmmac/mac100.h | 116 ++ drivers/net/stmmac/stmmac.h | 98 ++ drivers/net/stmmac/stmmac_ethtool.c | 395 +++++++ drivers/net/stmmac/stmmac_main.c | 2204 +++++++++++++++++++++++++++++++++++ drivers/net/stmmac/stmmac_mdio.c | 217 ++++ drivers/net/stmmac/stmmac_timer.c | 140 +++ drivers/net/stmmac/stmmac_timer.h | 41 + 16 files changed, 5178 insertions(+) create mode 100644 drivers/net/stmmac/Kconfig create mode 100644 drivers/net/stmmac/Makefile create mode 100644 drivers/net/stmmac/common.h create mode 100644 drivers/net/stmmac/descs.h create mode 100644 drivers/net/stmmac/gmac.c create mode 100644 drivers/net/stmmac/gmac.h create mode 100644 drivers/net/stmmac/mac100.c create mode 100644 drivers/net/stmmac/mac100.h create mode 100644 drivers/net/stmmac/stmmac.h create mode 100644 drivers/net/stmmac/stmmac_ethtool.c create mode 100644 drivers/net/stmmac/stmmac_main.c create mode 100644 drivers/net/stmmac/stmmac_mdio.c create mode 100644 drivers/net/stmmac/stmmac_timer.c create mode 100644 drivers/net/stmmac/stmmac_timer.h (limited to 'drivers/net') diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index f520e3ae1941..ce2eba173865 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -2483,6 +2483,8 @@ config S6GMAC To compile this driver as a module, choose M here. The module will be called s6gmac. +source "drivers/net/stmmac/Kconfig" + endif # NETDEV_1000 # diff --git a/drivers/net/Makefile b/drivers/net/Makefile index fc6c8bb92c50..246323d7f161 100644 --- a/drivers/net/Makefile +++ b/drivers/net/Makefile @@ -100,6 +100,7 @@ obj-$(CONFIG_VIA_VELOCITY) += via-velocity.o obj-$(CONFIG_ADAPTEC_STARFIRE) += starfire.o obj-$(CONFIG_RIONET) += rionet.o obj-$(CONFIG_SH_ETH) += sh_eth.o +obj-$(CONFIG_STMMAC_ETH) += stmmac/ # # end link order section diff --git a/drivers/net/stmmac/Kconfig b/drivers/net/stmmac/Kconfig new file mode 100644 index 000000000000..35eaa5251d7f --- /dev/null +++ b/drivers/net/stmmac/Kconfig @@ -0,0 +1,53 @@ +config STMMAC_ETH + tristate "STMicroelectronics 10/100/1000 Ethernet driver" + select MII + select PHYLIB + depends on NETDEVICES && CPU_SUBTYPE_ST40 + help + This is the driver for the ST MAC 10/100/1000 on-chip Ethernet + controllers. ST Ethernet IPs are built around a Synopsys IP Core. + +if STMMAC_ETH + +config STMMAC_DA + bool "STMMAC DMA arbitration scheme" + default n + help + Selecting this option, rx has priority over Tx (only for Giga + Ethernet device). + By default, the DMA arbitration scheme is based on Round-robin + (rx:tx priority is 1:1). + +config STMMAC_DUAL_MAC + bool "STMMAC: dual mac support (EXPERIMENTAL)" + default n + depends on EXPERIMENTAL && STMMAC_ETH && !STMMAC_TIMER + help + Some ST SoCs (for example the stx7141 and stx7200c2) have two + Ethernet Controllers. This option turns on the second Ethernet + device on this kind of platforms. + +config STMMAC_TIMER + bool "STMMAC Timer optimisation" + default n + help + Use an external timer for mitigating the number of network + interrupts. + +choice + prompt "Select Timer device" + depends on STMMAC_TIMER + +config STMMAC_TMU_TIMER + bool "TMU channel 2" + depends on CPU_SH4 + help + +config STMMAC_RTC_TIMER + bool "Real time clock" + depends on RTC_CLASS + help + +endchoice + +endif diff --git a/drivers/net/stmmac/Makefile b/drivers/net/stmmac/Makefile new file mode 100644 index 000000000000..b2d7a5564dfa --- /dev/null +++ b/drivers/net/stmmac/Makefile @@ -0,0 +1,4 @@ +obj-$(CONFIG_STMMAC_ETH) += stmmac.o +stmmac-$(CONFIG_STMMAC_TIMER) += stmmac_timer.o +stmmac-objs:= stmmac_main.o stmmac_ethtool.o stmmac_mdio.o \ + mac100.o gmac.o $(stmmac-y) diff --git a/drivers/net/stmmac/common.h b/drivers/net/stmmac/common.h new file mode 100644 index 000000000000..e49e5188e887 --- /dev/null +++ b/drivers/net/stmmac/common.h @@ -0,0 +1,330 @@ +/******************************************************************************* + STMMAC Common Header File + + Copyright (C) 2007-2009 STMicroelectronics Ltd + + This program is free software; you can redistribute it and/or modify it + under the terms and conditions of the GNU General Public License, + version 2, as published by the Free Software Foundation. + + This program is distributed in the hope it will be useful, but WITHOUT + ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + more details. + + You should have received a copy of the GNU General Public License along with + this program; if not, write to the Free Software Foundation, Inc., + 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + + The full GNU General Public License is included in this distribution in + the file called "COPYING". + + Author: Giuseppe Cavallaro +*******************************************************************************/ + +#include "descs.h" +#include + +/* ********************************************* + DMA CRS Control and Status Register Mapping + * *********************************************/ +#define DMA_BUS_MODE 0x00001000 /* Bus Mode */ +#define DMA_XMT_POLL_DEMAND 0x00001004 /* Transmit Poll Demand */ +#define DMA_RCV_POLL_DEMAND 0x00001008 /* Received Poll Demand */ +#define DMA_RCV_BASE_ADDR 0x0000100c /* Receive List Base */ +#define DMA_TX_BASE_ADDR 0x00001010 /* Transmit List Base */ +#define DMA_STATUS 0x00001014 /* Status Register */ +#define DMA_CONTROL 0x00001018 /* Ctrl (Operational Mode) */ +#define DMA_INTR_ENA 0x0000101c /* Interrupt Enable */ +#define DMA_MISSED_FRAME_CTR 0x00001020 /* Missed Frame Counter */ +#define DMA_CUR_TX_BUF_ADDR 0x00001050 /* Current Host Tx Buffer */ +#define DMA_CUR_RX_BUF_ADDR 0x00001054 /* Current Host Rx Buffer */ + +/* ******************************** + DMA Control register defines + * ********************************/ +#define DMA_CONTROL_ST 0x00002000 /* Start/Stop Transmission */ +#define DMA_CONTROL_SR 0x00000002 /* Start/Stop Receive */ + +/* ************************************** + DMA Interrupt Enable register defines + * **************************************/ +/**** NORMAL INTERRUPT ****/ +#define DMA_INTR_ENA_NIE 0x00010000 /* Normal Summary */ +#define DMA_INTR_ENA_TIE 0x00000001 /* Transmit Interrupt */ +#define DMA_INTR_ENA_TUE 0x00000004 /* Transmit Buffer Unavailable */ +#define DMA_INTR_ENA_RIE 0x00000040 /* Receive Interrupt */ +#define DMA_INTR_ENA_ERE 0x00004000 /* Early Receive */ + +#define DMA_INTR_NORMAL (DMA_INTR_ENA_NIE | DMA_INTR_ENA_RIE | \ + DMA_INTR_ENA_TIE) + +/**** ABNORMAL INTERRUPT ****/ +#define DMA_INTR_ENA_AIE 0x00008000 /* Abnormal Summary */ +#define DMA_INTR_ENA_FBE 0x00002000 /* Fatal Bus Error */ +#define DMA_INTR_ENA_ETE 0x00000400 /* Early Transmit */ +#define DMA_INTR_ENA_RWE 0x00000200 /* Receive Watchdog */ +#define DMA_INTR_ENA_RSE 0x00000100 /* Receive Stopped */ +#define DMA_INTR_ENA_RUE 0x00000080 /* Receive Buffer Unavailable */ +#define DMA_INTR_ENA_UNE 0x00000020 /* Tx Underflow */ +#define DMA_INTR_ENA_OVE 0x00000010 /* Receive Overflow */ +#define DMA_INTR_ENA_TJE 0x00000008 /* Transmit Jabber */ +#define DMA_INTR_ENA_TSE 0x00000002 /* Transmit Stopped */ + +#define DMA_INTR_ABNORMAL (DMA_INTR_ENA_AIE | DMA_INTR_ENA_FBE | \ + DMA_INTR_ENA_UNE) + +/* DMA default interrupt mask */ +#define DMA_INTR_DEFAULT_MASK (DMA_INTR_NORMAL | DMA_INTR_ABNORMAL) + +/* **************************** + * DMA Status register defines + * ****************************/ +#define DMA_STATUS_GPI 0x10000000 /* PMT interrupt */ +#define DMA_STATUS_GMI 0x08000000 /* MMC interrupt */ +#define DMA_STATUS_GLI 0x04000000 /* GMAC Line interface int. */ +#define DMA_STATUS_GMI 0x08000000 +#define DMA_STATUS_GLI 0x04000000 +#define DMA_STATUS_EB_MASK 0x00380000 /* Error Bits Mask */ +#define DMA_STATUS_EB_TX_ABORT 0x00080000 /* Error Bits - TX Abort */ +#define DMA_STATUS_EB_RX_ABORT 0x00100000 /* Error Bits - RX Abort */ +#define DMA_STATUS_TS_MASK 0x00700000 /* Transmit Process State */ +#define DMA_STATUS_TS_SHIFT 20 +#define DMA_STATUS_RS_MASK 0x000e0000 /* Receive Process State */ +#define DMA_STATUS_RS_SHIFT 17 +#define DMA_STATUS_NIS 0x00010000 /* Normal Interrupt Summary */ +#define DMA_STATUS_AIS 0x00008000 /* Abnormal Interrupt Summary */ +#define DMA_STATUS_ERI 0x00004000 /* Early Receive Interrupt */ +#define DMA_STATUS_FBI 0x00002000 /* Fatal Bus Error Interrupt */ +#define DMA_STATUS_ETI 0x00000400 /* Early Transmit Interrupt */ +#define DMA_STATUS_RWT 0x00000200 /* Receive Watchdog Timeout */ +#define DMA_STATUS_RPS 0x00000100 /* Receive Process Stopped */ +#define DMA_STATUS_RU 0x00000080 /* Receive Buffer Unavailable */ +#define DMA_STATUS_RI 0x00000040 /* Receive Interrupt */ +#define DMA_STATUS_UNF 0x00000020 /* Transmit Underflow */ +#define DMA_STATUS_OVF 0x00000010 /* Receive Overflow */ +#define DMA_STATUS_TJT 0x00000008 /* Transmit Jabber Timeout */ +#define DMA_STATUS_TU 0x00000004 /* Transmit Buffer Unavailable */ +#define DMA_STATUS_TPS 0x00000002 /* Transmit Process Stopped */ +#define DMA_STATUS_TI 0x00000001 /* Transmit Interrupt */ + +/* Other defines */ +#define HASH_TABLE_SIZE 64 +#define PAUSE_TIME 0x200 + +/* Flow Control defines */ +#define FLOW_OFF 0 +#define FLOW_RX 1 +#define FLOW_TX 2 +#define FLOW_AUTO (FLOW_TX | FLOW_RX) + +/* DMA STORE-AND-FORWARD Operation Mode */ +#define SF_DMA_MODE 1 + +#define HW_CSUM 1 +#define NO_HW_CSUM 0 + +/* GMAC TX FIFO is 8K, Rx FIFO is 16K */ +#define BUF_SIZE_16KiB 16384 +#define BUF_SIZE_8KiB 8192 +#define BUF_SIZE_4KiB 4096 +#define BUF_SIZE_2KiB 2048 + +/* Power Down and WOL */ +#define PMT_NOT_SUPPORTED 0 +#define PMT_SUPPORTED 1 + +/* Common MAC defines */ +#define MAC_CTRL_REG 0x00000000 /* MAC Control */ +#define MAC_ENABLE_TX 0x00000008 /* Transmitter Enable */ +#define MAC_RNABLE_RX 0x00000004 /* Receiver Enable */ + +/* MAC Management Counters register */ +#define MMC_CONTROL 0x00000100 /* MMC Control */ +#define MMC_HIGH_INTR 0x00000104 /* MMC High Interrupt */ +#define MMC_LOW_INTR 0x00000108 /* MMC Low Interrupt */ +#define MMC_HIGH_INTR_MASK 0x0000010c /* MMC High Interrupt Mask */ +#define MMC_LOW_INTR_MASK 0x00000110 /* MMC Low Interrupt Mask */ + +#define MMC_CONTROL_MAX_FRM_MASK 0x0003ff8 /* Maximum Frame Size */ +#define MMC_CONTROL_MAX_FRM_SHIFT 3 +#define MMC_CONTROL_MAX_FRAME 0x7FF + +struct stmmac_extra_stats { + /* Transmit errors */ + unsigned long tx_underflow ____cacheline_aligned; + unsigned long tx_carrier; + unsigned long tx_losscarrier; + unsigned long tx_heartbeat; + unsigned long tx_deferred; + unsigned long tx_vlan; + unsigned long tx_jabber; + unsigned long tx_frame_flushed; + unsigned long tx_payload_error; + unsigned long tx_ip_header_error; + /* Receive errors */ + unsigned long rx_desc; + unsigned long rx_partial; + unsigned long rx_runt; + unsigned long rx_toolong; + unsigned long rx_collision; + unsigned long rx_crc; + unsigned long rx_lenght; + unsigned long rx_mii; + unsigned long rx_multicast; + unsigned long rx_gmac_overflow; + unsigned long rx_watchdog; + unsigned long da_rx_filter_fail; + unsigned long sa_rx_filter_fail; + unsigned long rx_missed_cntr; + unsigned long rx_overflow_cntr; + unsigned long rx_vlan; + /* Tx/Rx IRQ errors */ + unsigned long tx_undeflow_irq; + unsigned long tx_process_stopped_irq; + unsigned long tx_jabber_irq; + unsigned long rx_overflow_irq; + unsigned long rx_buf_unav_irq; + unsigned long rx_process_stopped_irq; + unsigned long rx_watchdog_irq; + unsigned long tx_early_irq; + unsigned long fatal_bus_error_irq; + /* Extra info */ + unsigned long threshold; + unsigned long tx_pkt_n; + unsigned long rx_pkt_n; + unsigned long poll_n; + unsigned long sched_timer_n; + unsigned long normal_irq_n; +}; + +/* GMAC core can compute the checksums in HW. */ +enum rx_frame_status { + good_frame = 0, + discard_frame = 1, + csum_none = 2, +}; + +static inline void stmmac_set_mac_addr(unsigned long ioaddr, u8 addr[6], + unsigned int high, unsigned int low) +{ + unsigned long data; + + data = (addr[5] << 8) | addr[4]; + writel(data, ioaddr + high); + data = (addr[3] << 24) | (addr[2] << 16) | (addr[1] << 8) | addr[0]; + writel(data, ioaddr + low); + + return; +} + +static inline void stmmac_get_mac_addr(unsigned long ioaddr, + unsigned char *addr, unsigned int high, + unsigned int low) +{ + unsigned int hi_addr, lo_addr; + + /* Read the MAC address from the hardware */ + hi_addr = readl(ioaddr + high); + lo_addr = readl(ioaddr + low); + + /* Extract the MAC address from the high and low words */ + addr[0] = lo_addr & 0xff; + addr[1] = (lo_addr >> 8) & 0xff; + addr[2] = (lo_addr >> 16) & 0xff; + addr[3] = (lo_addr >> 24) & 0xff; + addr[4] = hi_addr & 0xff; + addr[5] = (hi_addr >> 8) & 0xff; + + return; +} + +struct stmmac_ops { + /* MAC core initialization */ + void (*core_init) (unsigned long ioaddr) ____cacheline_aligned; + /* DMA core initialization */ + int (*dma_init) (unsigned long ioaddr, int pbl, u32 dma_tx, u32 dma_rx); + /* Dump MAC registers */ + void (*dump_mac_regs) (unsigned long ioaddr); + /* Dump DMA registers */ + void (*dump_dma_regs) (unsigned long ioaddr); + /* Set tx/rx threshold in the csr6 register + * An invalid value enables the store-and-forward mode */ + void (*dma_mode) (unsigned long ioaddr, int txmode, int rxmode); + /* To track extra statistic (if supported) */ + void (*dma_diagnostic_fr) (void *data, struct stmmac_extra_stats *x, + unsigned long ioaddr); + /* RX descriptor ring initialization */ + void (*init_rx_desc) (struct dma_desc *p, unsigned int ring_size, + int disable_rx_ic); + /* TX descriptor ring initialization */ + void (*init_tx_desc) (struct dma_desc *p, unsigned int ring_size); + + /* Invoked by the xmit function to prepare the tx descriptor */ + void (*prepare_tx_desc) (struct dma_desc *p, int is_fs, int len, + int csum_flag); + /* Set/get the owner of the descriptor */ + void (*set_tx_owner) (struct dma_desc *p); + int (*get_tx_owner) (struct dma_desc *p); + /* Invoked by the xmit function to close the tx descriptor */ + void (*close_tx_desc) (struct dma_desc *p); + /* Clean the tx descriptor as soon as the tx irq is received */ + void (*release_tx_desc) (struct dma_desc *p); + /* Clear interrupt on tx frame completion. When this bit is + * set an interrupt happens as soon as the frame is transmitted */ + void (*clear_tx_ic) (struct dma_desc *p); + /* Last tx segment reports the transmit status */ + int (*get_tx_ls) (struct dma_desc *p); + /* Return the transmit status looking at the TDES1 */ + int (*tx_status) (void *data, struct stmmac_extra_stats *x, + struct dma_desc *p, unsigned long ioaddr); + /* Get the buffer size from the descriptor */ + int (*get_tx_len) (struct dma_desc *p); + /* Handle extra events on specific interrupts hw dependent */ + void (*host_irq_status) (unsigned long ioaddr); + int (*get_rx_owner) (struct dma_desc *p); + void (*set_rx_owner) (struct dma_desc *p); + /* Get the receive frame size */ + int (*get_rx_frame_len) (struct dma_desc *p); + /* Return the reception status looking at the RDES1 */ + int (*rx_status) (void *data, struct stmmac_extra_stats *x, + struct dma_desc *p); + /* Multicast filter setting */ + void (*set_filter) (struct net_device *dev); + /* Flow control setting */ + void (*flow_ctrl) (unsigned long ioaddr, unsigned int duplex, + unsigned int fc, unsigned int pause_time); + /* Set power management mode (e.g. magic frame) */ + void (*pmt) (unsigned long ioaddr, unsigned long mode); + /* Set/Get Unicast MAC addresses */ + void (*set_umac_addr) (unsigned long ioaddr, unsigned char *addr, + unsigned int reg_n); + void (*get_umac_addr) (unsigned long ioaddr, unsigned char *addr, + unsigned int reg_n); +}; + +struct mac_link { + int port; + int duplex; + int speed; +}; + +struct mii_regs { + unsigned int addr; /* MII Address */ + unsigned int data; /* MII Data */ +}; + +struct hw_cap { + unsigned int version; /* Core Version register (GMAC) */ + unsigned int pmt; /* Power-Down mode (GMAC) */ + struct mac_link link; + struct mii_regs mii; +}; + +struct mac_device_info { + struct hw_cap hw; + struct stmmac_ops *ops; +}; + +struct mac_device_info *gmac_setup(unsigned long addr); +struct mac_device_info *mac100_setup(unsigned long addr); diff --git a/drivers/net/stmmac/descs.h b/drivers/net/stmmac/descs.h new file mode 100644 index 000000000000..6d2a0b2f5e57 --- /dev/null +++ b/drivers/net/stmmac/descs.h @@ -0,0 +1,163 @@ +/******************************************************************************* + Header File to describe the DMA descriptors + Use enhanced descriptors in case of GMAC Cores. + + This program is free software; you can redistribute it and/or modify it + under the terms and conditions of the GNU General Public License, + version 2, as published by the Free Software Foundation. + + This program is distributed in the hope it will be useful, but WITHOUT + ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + more details. + + You should have received a copy of the GNU General Public License along with + this program; if not, write to the Free Software Foundation, Inc., + 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + + The full GNU General Public License is included in this distribution in + the file called "COPYING". + + Author: Giuseppe Cavallaro +*******************************************************************************/ +struct dma_desc { + /* Receive descriptor */ + union { + struct { + /* RDES0 */ + u32 reserved1:1; + u32 crc_error:1; + u32 dribbling:1; + u32 mii_error:1; + u32 receive_watchdog:1; + u32 frame_type:1; + u32 collision:1; + u32 frame_too_long:1; + u32 last_descriptor:1; + u32 first_descriptor:1; + u32 multicast_frame:1; + u32 run_frame:1; + u32 length_error:1; + u32 partial_frame_error:1; + u32 descriptor_error:1; + u32 error_summary:1; + u32 frame_length:14; + u32 filtering_fail:1; + u32 own:1; + /* RDES1 */ + u32 buffer1_size:11; + u32 buffer2_size:11; + u32 reserved2:2; + u32 second_address_chained:1; + u32 end_ring:1; + u32 reserved3:5; + u32 disable_ic:1; + } rx; + struct { + /* RDES0 */ + u32 payload_csum_error:1; + u32 crc_error:1; + u32 dribbling:1; + u32 error_gmii:1; + u32 receive_watchdog:1; + u32 frame_type:1; + u32 late_collision:1; + u32 ipc_csum_error:1; + u32 last_descriptor:1; + u32 first_descriptor:1; + u32 vlan_tag:1; + u32 overflow_error:1; + u32 length_error:1; + u32 sa_filter_fail:1; + u32 descriptor_error:1; + u32 error_summary:1; + u32 frame_length:14; + u32 da_filter_fail:1; + u32 own:1; + /* RDES1 */ + u32 buffer1_size:13; + u32 reserved1:1; + u32 second_address_chained:1; + u32 end_ring:1; + u32 buffer2_size:13; + u32 reserved2:2; + u32 disable_ic:1; + } erx; /* -- enhanced -- */ + + /* Transmit descriptor */ + struct { + /* TDES0 */ + u32 deferred:1; + u32 underflow_error:1; + u32 excessive_deferral:1; + u32 collision_count:4; + u32 heartbeat_fail:1; + u32 excessive_collisions:1; + u32 late_collision:1; + u32 no_carrier:1; + u32 loss_carrier:1; + u32 reserved1:3; + u32 error_summary:1; + u32 reserved2:15; + u32 own:1; + /* TDES1 */ + u32 buffer1_size:11; + u32 buffer2_size:11; + u32 reserved3:1; + u32 disable_padding:1; + u32 second_address_chained:1; + u32 end_ring:1; + u32 crc_disable:1; + u32 reserved4:2; + u32 first_segment:1; + u32 last_segment:1; + u32 interrupt:1; + } tx; + struct { + /* TDES0 */ + u32 deferred:1; + u32 underflow_error:1; + u32 excessive_deferral:1; + u32 collision_count:4; + u32 vlan_frame:1; + u32 excessive_collisions:1; + u32 late_collision:1; + u32 no_carrier:1; + u32 loss_carrier:1; + u32 payload_error:1; + u32 frame_flushed:1; + u32 jabber_timeout:1; + u32 error_summary:1; + u32 ip_header_error:1; + u32 time_stamp_status:1; + u32 reserved1:2; + u32 second_address_chained:1; + u32 end_ring:1; + u32 checksum_insertion:2; + u32 reserved2:1; + u32 time_stamp_enable:1; + u32 disable_padding:1; + u32 crc_disable:1; + u32 first_segment:1; + u32 last_segment:1; + u32 interrupt:1; + u32 own:1; + /* TDES1 */ + u32 buffer1_size:13; + u32 reserved3:3; + u32 buffer2_size:13; + u32 reserved4:3; + } etx; /* -- enhanced -- */ + } des01; + unsigned int des2; + unsigned int des3; +}; + +/* Transmit checksum insertion control */ +enum tdes_csum_insertion { + cic_disabled = 0, /* Checksum Insertion Control */ + cic_only_ip = 1, /* Only IP header */ + cic_no_pseudoheader = 2, /* IP header but pseudoheader + * is not calculated */ + cic_full = 3, /* IP header and pseudoheader */ +}; diff --git a/drivers/net/stmmac/gmac.c b/drivers/net/stmmac/gmac.c new file mode 100644 index 000000000000..b624bb5bae0a --- /dev/null +++ b/drivers/net/stmmac/gmac.c @@ -0,0 +1,693 @@ +/******************************************************************************* + This is the driver for the GMAC on-chip Ethernet controller for ST SoCs. + DWC Ether MAC 10/100/1000 Universal version 3.41a has been used for + developing this code. + + Copyright (C) 2007-2009 STMicroelectronics Ltd + + This program is free software; you can redistribute it and/or modify it + under the terms and conditions of the GNU General Public License, + version 2, as published by the Free Software Foundation. + + This program is distributed in the hope it will be useful, but WITHOUT + ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + more details. + + You should have received a copy of the GNU General Public License along with + this program; if not, write to the Free Software Foundation, Inc., + 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + + The full GNU General Public License is included in this distribution in + the file called "COPYING". + + Author: Giuseppe Cavallaro +*******************************************************************************/ + +#include +#include +#include +#include + +#include "stmmac.h" +#include "gmac.h" + +#undef GMAC_DEBUG +/*#define GMAC_DEBUG*/ +#undef FRAME_FILTER_DEBUG +/*#define FRAME_FILTER_DEBUG*/ +#ifdef GMAC_DEBUG +#define DBG(fmt, args...) printk(fmt, ## args) +#else +#define DBG(fmt, args...) do { } while (0) +#endif + +static void gmac_dump_regs(unsigned long ioaddr) +{ + int i; + pr_info("\t----------------------------------------------\n" + "\t GMAC registers (base addr = 0x%8x)\n" + "\t----------------------------------------------\n", + (unsigned int)ioaddr); + + for (i = 0; i < 55; i++) { + int offset = i * 4; + pr_info("\tReg No. %d (offset 0x%x): 0x%08x\n", i, + offset, readl(ioaddr + offset)); + } + return; +} + +static int gmac_dma_init(unsigned long ioaddr, int pbl, u32 dma_tx, u32 dma_rx) +{ + u32 value = readl(ioaddr + DMA_BUS_MODE); + /* DMA SW reset */ + value |= DMA_BUS_MODE_SFT_RESET; + writel(value, ioaddr + DMA_BUS_MODE); + do {} while ((readl(ioaddr + DMA_BUS_MODE) & DMA_BUS_MODE_SFT_RESET)); + + value = /* DMA_BUS_MODE_FB | */ DMA_BUS_MODE_4PBL | + ((pbl << DMA_BUS_MODE_PBL_SHIFT) | + (pbl << DMA_BUS_MODE_RPBL_SHIFT)); + +#ifdef CONFIG_STMMAC_DA + value |= DMA_BUS_MODE_DA; /* Rx has priority over tx */ +#endif + writel(value, ioaddr + DMA_BUS_MODE); + + /* Mask interrupts by writing to CSR7 */ + writel(DMA_INTR_DEFAULT_MASK, ioaddr + DMA_INTR_ENA); + + /* The base address of the RX/TX descriptor lists must be written into + * DMA CSR3 and CSR4, respectively. */ + writel(dma_tx, ioaddr + DMA_TX_BASE_ADDR); + writel(dma_rx, ioaddr + DMA_RCV_BASE_ADDR); + + return 0; +} + +/* Transmit FIFO flush operation */ +static void gmac_flush_tx_fifo(unsigned long ioaddr) +{ + u32 csr6 = readl(ioaddr + DMA_CONTROL); + writel((csr6 | DMA_CONTROL_FTF), ioaddr + DMA_CONTROL); + + do {} while ((readl(ioaddr + DMA_CONTROL) & DMA_CONTROL_FTF)); +} + +static void gmac_dma_operation_mode(unsigned long ioaddr, int txmode, + int rxmode) +{ + u32 csr6 = readl(ioaddr + DMA_CONTROL); + + if (txmode == SF_DMA_MODE) { + DBG(KERN_DEBUG "GMAC: enabling TX store and forward mode\n"); + /* Transmit COE type 2 cannot be done in cut-through mode. */ + csr6 |= DMA_CONTROL_TSF; + /* Operating on second frame increase the performance + * especially when transmit store-and-forward is used.*/ + csr6 |= DMA_CONTROL_OSF; + } else { + DBG(KERN_DEBUG "GMAC: disabling TX store and forward mode" + " (threshold = %d)\n", txmode); + csr6 &= ~DMA_CONTROL_TSF; + csr6 &= DMA_CONTROL_TC_TX_MASK; + /* Set the transmit threashold */ + if (txmode <= 32) + csr6 |= DMA_CONTROL_TTC_32; + else if (txmode <= 64) + csr6 |= DMA_CONTROL_TTC_64; + else if (txmode <= 128) + csr6 |= DMA_CONTROL_TTC_128; + else if (txmode <= 192) + csr6 |= DMA_CONTROL_TTC_192; + else + csr6 |= DMA_CONTROL_TTC_256; + } + + if (rxmode == SF_DMA_MODE) { + DBG(KERN_DEBUG "GMAC: enabling RX store and forward mode\n"); + csr6 |= DMA_CONTROL_RSF; + } else { + DBG(KERN_DEBUG "GMAC: disabling RX store and forward mode" + " (threshold = %d)\n", rxmode); + csr6 &= ~DMA_CONTROL_RSF; + csr6 &= DMA_CONTROL_TC_RX_MASK; + if (rxmode <= 32) + csr6 |= DMA_CONTROL_RTC_32; + else if (rxmode <= 64) + csr6 |= DMA_CONTROL_RTC_64; + else if (rxmode <= 96) + csr6 |= DMA_CONTROL_RTC_96; + else + csr6 |= DMA_CONTROL_RTC_128; + } + + writel(csr6, ioaddr + DMA_CONTROL); + return; +} + +/* Not yet implemented --- no RMON module */ +static void gmac_dma_diagnostic_fr(void *data, struct stmmac_extra_stats *x, + unsigned long ioaddr) +{ + return; +} + +static void gmac_dump_dma_regs(unsigned long ioaddr) +{ + int i; + pr_info(" DMA registers\n"); + for (i = 0; i < 22; i++) { + if ((i < 9) || (i > 17)) { + int offset = i * 4; + pr_err("\t Reg No. %d (offset 0x%x): 0x%08x\n", i, + (DMA_BUS_MODE + offset), + readl(ioaddr + DMA_BUS_MODE + offset)); + } + } + return; +} + +static int gmac_get_tx_frame_status(void *data, struct stmmac_extra_stats *x, + struct dma_desc *p, unsigned long ioaddr) +{ + int ret = 0; + struct net_device_stats *stats = (struct net_device_stats *)data; + + if (unlikely(p->des01.etx.error_summary)) { + DBG(KERN_ERR "GMAC TX error... 0x%08x\n", p->des01.etx); + if (unlikely(p->des01.etx.jabber_timeout)) { + DBG(KERN_ERR "\tjabber_timeout error\n"); + x->tx_jabber++; + } + + if (unlikely(p->des01.etx.frame_flushed)) { + DBG(KERN_ERR "\tframe_flushed error\n"); + x->tx_frame_flushed++; + gmac_flush_tx_fifo(ioaddr); + } + + if (unlikely(p->des01.etx.loss_carrier)) { + DBG(KERN_ERR "\tloss_carrier error\n"); + x->tx_losscarrier++; + stats->tx_carrier_errors++; + } + if (unlikely(p->des01.etx.no_carrier)) { + DBG(KERN_ERR "\tno_carrier error\n"); + x->tx_carrier++; + stats->tx_carrier_errors++; + } + if (unlikely(p->des01.etx.late_collision)) { + DBG(KERN_ERR "\tlate_collision error\n"); + stats->collisions += p->des01.etx.collision_count; + } + if (unlikely(p->des01.etx.excessive_collisions)) { + DBG(KERN_ERR "\texcessive_collisions\n"); + stats->collisions += p->des01.etx.collision_count; + } + if (unlikely(p->des01.etx.excessive_deferral)) { + DBG(KERN_INFO "\texcessive tx_deferral\n"); + x->tx_deferred++; + } + + if (unlikely(p->des01.etx.underflow_error)) { + DBG(KERN_ERR "\tunderflow error\n"); + gmac_flush_tx_fifo(ioaddr); + x->tx_underflow++; + } + + if (unlikely(p->des01.etx.ip_header_error)) { + DBG(KERN_ERR "\tTX IP header csum error\n"); + x->tx_ip_header_error++; + } + + if (unlikely(p->des01.etx.payload_error)) { + DBG(KERN_ERR "\tAddr/Payload csum error\n"); + x->tx_payload_error++; + gmac_flush_tx_fifo(ioaddr); + } + + ret = -1; + } + + if (unlikely(p->des01.etx.deferred)) { + DBG(KERN_INFO "GMAC TX status: tx deferred\n"); + x->tx_deferred++; + } +#ifdef STMMAC_VLAN_TAG_USED + if (p->des01.etx.vlan_frame) { + DBG(KERN_INFO "GMAC TX status: VLAN frame\n"); + x->tx_vlan++; + } +#endif + + return ret; +} + +static int gmac_get_tx_len(struct dma_desc *p) +{ + return p->des01.etx.buffer1_size; +} + +static int gmac_coe_rdes0(int ipc_err, int type, int payload_err) +{ + int ret = good_frame; + u32 status = (type << 2 | ipc_err << 1 | payload_err) & 0x7; + + /* bits 5 7 0 | Frame status + * ---------------------------------------------------------- + * 0 0 0 | IEEE 802.3 Type frame (lenght < 1536 octects) + * 1 0 0 | IPv4/6 No CSUM errorS. + * 1 0 1 | IPv4/6 CSUM PAYLOAD error + * 1 1 0 | IPv4/6 CSUM IP HR error + * 1 1 1 | IPv4/6 IP PAYLOAD AND HEADER errorS + * 0 0 1 | IPv4/6 unsupported IP PAYLOAD + * 0 1 1 | COE bypassed.. no IPv4/6 frame + * 0 1 0 | Reserved. + */ + if (status == 0x0) { + DBG(KERN_INFO "RX Des0 status: IEEE 802.3 Type frame.\n"); + ret = good_frame; + } else if (status == 0x4) { + DBG(KERN_INFO "RX Des0 status: IPv4/6 No CSUM errorS.\n"); + ret = good_frame; + } else if (status == 0x5) { + DBG(KERN_ERR "RX Des0 status: IPv4/6 Payload Error.\n"); + ret = csum_none; + } else if (status == 0x6) { + DBG(KERN_ERR "RX Des0 status: IPv4/6 Header Error.\n"); + ret = csum_none; + } else if (status == 0x7) { + DBG(KERN_ERR + "RX Des0 status: IPv4/6 Header and Payload Error.\n"); + ret = csum_none; + } else if (status == 0x1) { + DBG(KERN_ERR + "RX Des0 status: IPv4/6 unsupported IP PAYLOAD.\n"); + ret = discard_frame; + } else if (status == 0x3) { + DBG(KERN_ERR "RX Des0 status: No IPv4, IPv6 frame.\n"); + ret = discard_frame; + } + return ret; +} + +static int gmac_get_rx_frame_status(void *data, struct stmmac_extra_stats *x, + struct dma_desc *p) +{ + int ret = good_frame; + struct net_device_stats *stats = (struct net_device_stats *)data; + + if (unlikely(p->des01.erx.error_summary)) { + DBG(KERN_ERR "GMAC RX Error Summary... 0x%08x\n", p->des01.erx); + if (unlikely(p->des01.erx.descriptor_error)) { + DBG(KERN_ERR "\tdescriptor error\n"); + x->rx_desc++; + stats->rx_length_errors++; + } + if (unlikely(p->des01.erx.overflow_error)) { + DBG(KERN_ERR "\toverflow error\n"); + x->rx_gmac_overflow++; + } + + if (unlikely(p->des01.erx.ipc_csum_error)) + DBG(KERN_ERR "\tIPC Csum Error/Giant frame\n"); + + if (unlikely(p->des01.erx.late_collision)) { + DBG(KERN_ERR "\tlate_collision error\n"); + stats->collisions++; + stats->collisions++; + } + if (unlikely(p->des01.erx.receive_watchdog)) { + DBG(KERN_ERR "\treceive_watchdog error\n"); + x->rx_watchdog++; + } + if (unlikely(p->des01.erx.error_gmii)) { + DBG(KERN_ERR "\tReceive Error\n"); + x->rx_mii++; + } + if (unlikely(p->des01.erx.crc_error)) { + DBG(KERN_ERR "\tCRC error\n"); + x->rx_crc++; + stats->rx_crc_errors++; + } + ret = discard_frame; + } + + /* After a payload csum error, the ES bit is set. + * It doesn't match with the information reported into the databook. + * At any rate, we need to understand if the CSUM hw computation is ok + * and report this info to the upper layers. */ + ret = gmac_coe_rdes0(p->des01.erx.ipc_csum_error, + p->des01.erx.frame_type, p->des01.erx.payload_csum_error); + + if (unlikely(p->des01.erx.dribbling)) { + DBG(KERN_ERR "GMAC RX: dribbling error\n"); + ret = discard_frame; + } + if (unlikely(p->des01.erx.sa_filter_fail)) { + DBG(KERN_ERR "GMAC RX : Source Address filter fail\n"); + x->sa_rx_filter_fail++; + ret = discard_frame; + } + if (unlikely(p->des01.erx.da_filter_fail)) { + DBG(KERN_ERR "GMAC RX : Destination Address filter fail\n"); + x->da_rx_filter_fail++; + ret = discard_frame; + } + if (unlikely(p->des01.erx.length_error)) { + DBG(KERN_ERR "GMAC RX: length_error error\n"); + x->rx_lenght++; + ret = discard_frame; + } +#ifdef STMMAC_VLAN_TAG_USED + if (p->des01.erx.vlan_tag) { + DBG(KERN_INFO "GMAC RX: VLAN frame tagged\n"); + x->rx_vlan++; + } +#endif + return ret; +} + +static void gmac_irq_status(unsigned long ioaddr) +{ + u32 intr_status = readl(ioaddr + GMAC_INT_STATUS); + + /* Not used events (e.g. MMC interrupts) are not handled. */ + if ((intr_status & mmc_tx_irq)) + DBG(KERN_DEBUG "GMAC: MMC tx interrupt: 0x%08x\n", + readl(ioaddr + GMAC_MMC_TX_INTR)); + if (unlikely(intr_status & mmc_rx_irq)) + DBG(KERN_DEBUG "GMAC: MMC rx interrupt: 0x%08x\n", + readl(ioaddr + GMAC_MMC_RX_INTR)); + if (unlikely(intr_status & mmc_rx_csum_offload_irq)) + DBG(KERN_DEBUG "GMAC: MMC rx csum offload: 0x%08x\n", + readl(ioaddr + GMAC_MMC_RX_CSUM_OFFLOAD)); + if (unlikely(intr_status & pmt_irq)) { + DBG(KERN_DEBUG "GMAC: received Magic frame\n"); + /* clear the PMT bits 5 and 6 by reading the PMT + * status register. */ + readl(ioaddr + GMAC_PMT); + } + + return; +} + +static void gmac_core_init(unsigned long ioaddr) +{ + u32 value = readl(ioaddr + GMAC_CONTROL); + value |= GMAC_CORE_INIT; + writel(value, ioaddr + GMAC_CONTROL); + + /* STBus Bridge Configuration */ + /*writel(0xc5608, ioaddr + 0x00007000);*/ + + /* Freeze MMC counters */ + writel(0x8, ioaddr + GMAC_MMC_CTRL); + /* Mask GMAC interrupts */ + writel(0x207, ioaddr + GMAC_INT_MASK); + +#ifdef STMMAC_VLAN_TAG_USED + /* Tag detection without filtering */ + writel(0x0, ioaddr + GMAC_VLAN_TAG); +#endif + return; +} + +static void gmac_set_umac_addr(unsigned long ioaddr, unsigned char *addr, + unsigned int reg_n) +{ + stmmac_set_mac_addr(ioaddr, addr, GMAC_ADDR_HIGH(reg_n), + GMAC_ADDR_LOW(reg_n)); +} + +static void gmac_get_umac_addr(unsigned long ioaddr, unsigned char *addr, + unsigned int reg_n) +{ + stmmac_get_mac_addr(ioaddr, addr, GMAC_ADDR_HIGH(reg_n), + GMAC_ADDR_LOW(reg_n)); +} + +static void gmac_set_filter(struct net_device *dev) +{ + unsigned long ioaddr = dev->base_addr; + unsigned int value = 0; + + DBG(KERN_INFO "%s: # mcasts %d, # unicast %d\n", + __func__, dev->mc_count, dev->uc_count); + + if (dev->flags & IFF_PROMISC) + value = GMAC_FRAME_FILTER_PR; + else if ((dev->mc_count > HASH_TABLE_SIZE) + || (dev->flags & IFF_ALLMULTI)) { + value = GMAC_FRAME_FILTER_PM; /* pass all multi */ + writel(0xffffffff, ioaddr + GMAC_HASH_HIGH); + writel(0xffffffff, ioaddr + GMAC_HASH_LOW); + } else if (dev->mc_count > 0) { + int i; + u32 mc_filter[2]; + struct dev_mc_list *mclist; + + /* Hash filter for multicast */ + value = GMAC_FRAME_FILTER_HMC; + + memset(mc_filter, 0, sizeof(mc_filter)); + for (i = 0, mclist = dev->mc_list; + mclist && i < dev->mc_count; i++, mclist = mclist->next) { + /* The upper 6 bits of the calculated CRC are used to + index the contens of the hash table */ + int bit_nr = + bitrev32(~crc32_le(~0, mclist->dmi_addr, 6)) >> 26; + /* The most significant bit determines the register to + * use (H/L) while the other 5 bits determine the bit + * within the register. */ + mc_filter[bit_nr >> 5] |= 1 << (bit_nr & 31); + } + writel(mc_filter[0], ioaddr + GMAC_HASH_LOW); + writel(mc_filter[1], ioaddr + GMAC_HASH_HIGH); + } + + /* Handle multiple unicast addresses (perfect filtering)*/ + if (dev->uc_count > GMAC_MAX_UNICAST_ADDRESSES) + /* Switch to promiscuous mode is more than 16 addrs + are required */ + value |= GMAC_FRAME_FILTER_PR; + else { + int i; + struct dev_addr_list *uc_ptr = dev->uc_list; + + for (i = 0; i < dev->uc_count; i++) { + gmac_set_umac_addr(ioaddr, uc_ptr->da_addr, + i + 1); + + DBG(KERN_INFO "\t%d " + "- Unicast addr %02x:%02x:%02x:%02x:%02x:" + "%02x\n", i + 1, + uc_ptr->da_addr[0], uc_ptr->da_addr[1], + uc_ptr->da_addr[2], uc_ptr->da_addr[3], + uc_ptr->da_addr[4], uc_ptr->da_addr[5]); + uc_ptr = uc_ptr->next; + } + } + +#ifdef FRAME_FILTER_DEBUG + /* Enable Receive all mode (to debug filtering_fail errors) */ + value |= GMAC_FRAME_FILTER_RA; +#endif + writel(value, ioaddr + GMAC_FRAME_FILTER); + + DBG(KERN_INFO "\tFrame Filter reg: 0x%08x\n\tHash regs: " + "HI 0x%08x, LO 0x%08x\n", readl(ioaddr + GMAC_FRAME_FILTER), + readl(ioaddr + GMAC_HASH_HIGH), readl(ioaddr + GMAC_HASH_LOW)); + + return; +} + +static void gmac_flow_ctrl(unsigned long ioaddr, unsigned int duplex, + unsigned int fc, unsigned int pause_time) +{ + unsigned int flow = 0; + + DBG(KERN_DEBUG "GMAC Flow-Control:\n"); + if (fc & FLOW_RX) { + DBG(KERN_DEBUG "\tReceive Flow-Control ON\n"); + flow |= GMAC_FLOW_CTRL_RFE; + } + if (fc & FLOW_TX) { + DBG(KERN_DEBUG "\tTransmit Flow-Control ON\n"); + flow |= GMAC_FLOW_CTRL_TFE; + } + + if (duplex) { + DBG(KERN_DEBUG "\tduplex mode: pause time: %d\n", pause_time); + flow |= (pause_time << GMAC_FLOW_CTRL_PT_SHIFT); + } + + writel(flow, ioaddr + GMAC_FLOW_CTRL); + return; +} + +static void gmac_pmt(unsigned long ioaddr, unsigned long mode) +{ + unsigned int pmt = 0; + + if (mode == WAKE_MAGIC) { + DBG(KERN_DEBUG "GMAC: WOL Magic frame\n"); + pmt |= power_down | magic_pkt_en; + } else if (mode == WAKE_UCAST) { + DBG(KERN_DEBUG "GMAC: WOL on global unicast\n"); + pmt |= global_unicast; + } + + writel(pmt, ioaddr + GMAC_PMT); + return; +} + +static void gmac_init_rx_desc(struct dma_desc *p, unsigned int ring_size, + int disable_rx_ic) +{ + int i; + for (i = 0; i < ring_size; i++) { + p->des01.erx.own = 1; + p->des01.erx.buffer1_size = BUF_SIZE_8KiB - 1; + /* To support jumbo frames */ + p->des01.erx.buffer2_size = BUF_SIZE_8KiB - 1; + if (i == ring_size - 1) + p->des01.erx.end_ring = 1; + if (disable_rx_ic) + p->des01.erx.disable_ic = 1; + p++; + } + return; +} + +static void gmac_init_tx_desc(struct dma_desc *p, unsigned int ring_size) +{ + int i; + + for (i = 0; i < ring_size; i++) { + p->des01.etx.own = 0; + if (i == ring_size - 1) + p->des01.etx.end_ring = 1; + p++; + } + + return; +} + +static int gmac_get_tx_owner(struct dma_desc *p) +{ + return p->des01.etx.own; +} + +static int gmac_get_rx_owner(struct dma_desc *p) +{ + return p->des01.erx.own; +} + +static void gmac_set_tx_owner(struct dma_desc *p) +{ + p->des01.etx.own = 1; +} + +static void gmac_set_rx_owner(struct dma_desc *p) +{ + p->des01.erx.own = 1; +} + +static int gmac_get_tx_ls(struct dma_desc *p) +{ + return p->des01.etx.last_segment; +} + +static void gmac_release_tx_desc(struct dma_desc *p) +{ + int ter = p->des01.etx.end_ring; + + memset(p, 0, sizeof(struct dma_desc)); + p->des01.etx.end_ring = ter; + + return; +} + +static void gmac_prepare_tx_desc(struct dma_desc *p, int is_fs, int len, + int csum_flag) +{ + p->des01.etx.first_segment = is_fs; + if (unlikely(len > BUF_SIZE_4KiB)) { + p->des01.etx.buffer1_size = BUF_SIZE_4KiB; + p->des01.etx.buffer2_size = len - BUF_SIZE_4KiB; + } else { + p->des01.etx.buffer1_size = len; + } + if (likely(csum_flag)) + p->des01.etx.checksum_insertion = cic_full; +} + +static void gmac_clear_tx_ic(struct dma_desc *p) +{ + p->des01.etx.interrupt = 0; +} + +static void gmac_close_tx_desc(struct dma_desc *p) +{ + p->des01.etx.last_segment = 1; + p->des01.etx.interrupt = 1; +} + +static int gmac_get_rx_frame_len(struct dma_desc *p) +{ + return p->des01.erx.frame_length; +} + +struct stmmac_ops gmac_driver = { + .core_init = gmac_core_init, + .dump_mac_regs = gmac_dump_regs, + .dma_init = gmac_dma_init, + .dump_dma_regs = gmac_dump_dma_regs, + .dma_mode = gmac_dma_operation_mode, + .dma_diagnostic_fr = gmac_dma_diagnostic_fr, + .tx_status = gmac_get_tx_frame_status, + .rx_status = gmac_get_rx_frame_status, + .get_tx_len = gmac_get_tx_len, + .set_filter = gmac_set_filter, + .flow_ctrl = gmac_flow_ctrl, + .pmt = gmac_pmt, + .init_rx_desc = gmac_init_rx_desc, + .init_tx_desc = gmac_init_tx_desc, + .get_tx_owner = gmac_get_tx_owner, + .get_rx_owner = gmac_get_rx_owner, + .release_tx_desc = gmac_release_tx_desc, + .prepare_tx_desc = gmac_prepare_tx_desc, + .clear_tx_ic = gmac_clear_tx_ic, + .close_tx_desc = gmac_close_tx_desc, + .get_tx_ls = gmac_get_tx_ls, + .set_tx_owner = gmac_set_tx_owner, + .set_rx_owner = gmac_set_rx_owner, + .get_rx_frame_len = gmac_get_rx_frame_len, + .host_irq_status = gmac_irq_status, + .set_umac_addr = gmac_set_umac_addr, + .get_umac_addr = gmac_get_umac_addr, +}; + +struct mac_device_info *gmac_setup(unsigned long ioaddr) +{ + struct mac_device_info *mac; + u32 uid = readl(ioaddr + GMAC_VERSION); + + pr_info("\tGMAC - user ID: 0x%x, Synopsys ID: 0x%x\n", + ((uid & 0x0000ff00) >> 8), (uid & 0x000000ff)); + + mac = kzalloc(sizeof(const struct mac_device_info), GFP_KERNEL); + + mac->ops = &gmac_driver; + mac->hw.pmt = PMT_SUPPORTED; + mac->hw.link.port = GMAC_CONTROL_PS; + mac->hw.link.duplex = GMAC_CONTROL_DM; + mac->hw.link.speed = GMAC_CONTROL_FES; + mac->hw.mii.addr = GMAC_MII_ADDR; + mac->hw.mii.data = GMAC_MII_DATA; + + return mac; +} diff --git a/drivers/net/stmmac/gmac.h b/drivers/net/stmmac/gmac.h new file mode 100644 index 000000000000..684a363120a9 --- /dev/null +++ b/drivers/net/stmmac/gmac.h @@ -0,0 +1,204 @@ +/******************************************************************************* + Copyright (C) 2007-2009 STMicroelectronics Ltd + + This program is free software; you can redistribute it and/or modify it + under the terms and conditions of the GNU General Public License, + version 2, as published by the Free Software Foundation. + + This program is distributed in the hope it will be useful, but WITHOUT + ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + more details. + + You should have received a copy of the GNU General Public License along with + this program; if not, write to the Free Software Foundation, Inc., + 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + + The full GNU General Public License is included in this distribution in + the file called "COPYING". + + Author: Giuseppe Cavallaro +*******************************************************************************/ + +#define GMAC_CONTROL 0x00000000 /* Configuration */ +#define GMAC_FRAME_FILTER 0x00000004 /* Frame Filter */ +#define GMAC_HASH_HIGH 0x00000008 /* Multicast Hash Table High */ +#define GMAC_HASH_LOW 0x0000000c /* Multicast Hash Table Low */ +#define GMAC_MII_ADDR 0x00000010 /* MII Address */ +#define GMAC_MII_DATA 0x00000014 /* MII Data */ +#define GMAC_FLOW_CTRL 0x00000018 /* Flow Control */ +#define GMAC_VLAN_TAG 0x0000001c /* VLAN Tag */ +#define GMAC_VERSION 0x00000020 /* GMAC CORE Version */ +#define GMAC_WAKEUP_FILTER 0x00000028 /* Wake-up Frame Filter */ + +#define GMAC_INT_STATUS 0x00000038 /* interrupt status register */ +enum gmac_irq_status { + time_stamp_irq = 0x0200, + mmc_rx_csum_offload_irq = 0x0080, + mmc_tx_irq = 0x0040, + mmc_rx_irq = 0x0020, + mmc_irq = 0x0010, + pmt_irq = 0x0008, + pcs_ane_irq = 0x0004, + pcs_link_irq = 0x0002, + rgmii_irq = 0x0001, +}; +#define GMAC_INT_MASK 0x0000003c /* interrupt mask register */ + +/* PMT Control and Status */ +#define GMAC_PMT 0x0000002c +enum power_event { + pointer_reset = 0x80000000, + global_unicast = 0x00000200, + wake_up_rx_frame = 0x00000040, + magic_frame = 0x00000020, + wake_up_frame_en = 0x00000004, + magic_pkt_en = 0x00000002, + power_down = 0x00000001, +}; + +/* GMAC HW ADDR regs */ +#define GMAC_ADDR_HIGH(reg) (0x00000040+(reg * 8)) +#define GMAC_ADDR_LOW(reg) (0x00000044+(reg * 8)) +#define GMAC_MAX_UNICAST_ADDRESSES 16 + +#define GMAC_AN_CTRL 0x000000c0 /* AN control */ +#define GMAC_AN_STATUS 0x000000c4 /* AN status */ +#define GMAC_ANE_ADV 0x000000c8 /* Auto-Neg. Advertisement */ +#define GMAC_ANE_LINK 0x000000cc /* Auto-Neg. link partener ability */ +#define GMAC_ANE_EXP 0x000000d0 /* ANE expansion */ +#define GMAC_TBI 0x000000d4 /* TBI extend status */ +#define GMAC_GMII_STATUS 0x000000d8 /* S/R-GMII status */ + +/* GMAC Configuration defines */ +#define GMAC_CONTROL_TC 0x01000000 /* Transmit Conf. in RGMII/SGMII */ +#define GMAC_CONTROL_WD 0x00800000 /* Disable Watchdog on receive */ +#define GMAC_CONTROL_JD 0x00400000 /* Jabber disable */ +#define GMAC_CONTROL_BE 0x00200000 /* Frame Burst Enable */ +#define GMAC_CONTROL_JE 0x00100000 /* Jumbo frame */ +enum inter_frame_gap { + GMAC_CONTROL_IFG_88 = 0x00040000, + GMAC_CONTROL_IFG_80 = 0x00020000, + GMAC_CONTROL_IFG_40 = 0x000e0000, +}; +#define GMAC_CONTROL_DCRS 0x00010000 /* Disable carrier sense during tx */ +#define GMAC_CONTROL_PS 0x00008000 /* Port Select 0:GMI 1:MII */ +#define GMAC_CONTROL_FES 0x00004000 /* Speed 0:10 1:100 */ +#define GMAC_CONTROL_DO 0x00002000 /* Disable Rx Own */ +#define GMAC_CONTROL_LM 0x00001000 /* Loop-back mode */ +#define GMAC_CONTROL_DM 0x00000800 /* Duplex Mode */ +#define GMAC_CONTROL_IPC 0x00000400 /* Checksum Offload */ +#define GMAC_CONTROL_DR 0x00000200 /* Disable Retry */ +#define GMAC_CONTROL_LUD 0x00000100 /* Link up/down */ +#define GMAC_CONTROL_ACS 0x00000080 /* Automatic Pad Stripping */ +#define GMAC_CONTROL_DC 0x00000010 /* Deferral Check */ +#define GMAC_CONTROL_TE 0x00000008 /* Transmitter Enable */ +#define GMAC_CONTROL_RE 0x00000004 /* Receiver Enable */ + +#define GMAC_CORE_INIT (GMAC_CONTROL_JD | GMAC_CONTROL_PS | GMAC_CONTROL_ACS | \ + GMAC_CONTROL_IPC | GMAC_CONTROL_JE | GMAC_CONTROL_BE) + +/* GMAC Frame Filter defines */ +#define GMAC_FRAME_FILTER_PR 0x00000001 /* Promiscuous Mode */ +#define GMAC_FRAME_FILTER_HUC 0x00000002 /* Hash Unicast */ +#define GMAC_FRAME_FILTER_HMC 0x00000004 /* Hash Multicast */ +#define GMAC_FRAME_FILTER_DAIF 0x00000008 /* DA Inverse Filtering */ +#define GMAC_FRAME_FILTER_PM 0x00000010 /* Pass all multicast */ +#define GMAC_FRAME_FILTER_DBF 0x00000020 /* Disable Broadcast frames */ +#define GMAC_FRAME_FILTER_SAIF 0x00000100 /* Inverse Filtering */ +#define GMAC_FRAME_FILTER_SAF 0x00000200 /* Source Address Filter */ +#define GMAC_FRAME_FILTER_HPF 0x00000400 /* Hash or perfect Filter */ +#define GMAC_FRAME_FILTER_RA 0x80000000 /* Receive all mode */ +/* GMII ADDR defines */ +#define GMAC_MII_ADDR_WRITE 0x00000002 /* MII Write */ +#define GMAC_MII_ADDR_BUSY 0x00000001 /* MII Busy */ +/* GMAC FLOW CTRL defines */ +#define GMAC_FLOW_CTRL_PT_MASK 0xffff0000 /* Pause Time Mask */ +#define GMAC_FLOW_CTRL_PT_SHIFT 16 +#define GMAC_FLOW_CTRL_RFE 0x00000004 /* Rx Flow Control Enable */ +#define GMAC_FLOW_CTRL_TFE 0x00000002 /* Tx Flow Control Enable */ +#define GMAC_FLOW_CTRL_FCB_BPA 0x00000001 /* Flow Control Busy ... */ + +/*--- DMA BLOCK defines ---*/ +/* DMA Bus Mode register defines */ +#define DMA_BUS_MODE_SFT_RESET 0x00000001 /* Software Reset */ +#define DMA_BUS_MODE_DA 0x00000002 /* Arbitration scheme */ +#define DMA_BUS_MODE_DSL_MASK 0x0000007c /* Descriptor Skip Length */ +#define DMA_BUS_MODE_DSL_SHIFT 2 /* (in DWORDS) */ +/* Programmable burst length (passed thorugh platform)*/ +#define DMA_BUS_MODE_PBL_MASK 0x00003f00 /* Programmable Burst Len */ +#define DMA_BUS_MODE_PBL_SHIFT 8 + +enum rx_tx_priority_ratio { + double_ratio = 0x00004000, /*2:1 */ + triple_ratio = 0x00008000, /*3:1 */ + quadruple_ratio = 0x0000c000, /*4:1 */ +}; + +#define DMA_BUS_MODE_FB 0x00010000 /* Fixed burst */ +#define DMA_BUS_MODE_RPBL_MASK 0x003e0000 /* Rx-Programmable Burst Len */ +#define DMA_BUS_MODE_RPBL_SHIFT 17 +#define DMA_BUS_MODE_USP 0x00800000 +#define DMA_BUS_MODE_4PBL 0x01000000 +#define DMA_BUS_MODE_AAL 0x02000000 + +/* DMA CRS Control and Status Register Mapping */ +#define DMA_HOST_TX_DESC 0x00001048 /* Current Host Tx descriptor */ +#define DMA_HOST_RX_DESC 0x0000104c /* Current Host Rx descriptor */ +/* DMA Bus Mode register defines */ +#define DMA_BUS_PR_RATIO_MASK 0x0000c000 /* Rx/Tx priority ratio */ +#define DMA_BUS_PR_RATIO_SHIFT 14 +#define DMA_BUS_FB 0x00010000 /* Fixed Burst */ + +/* DMA operation mode defines (start/stop tx/rx are placed in common header)*/ +#define DMA_CONTROL_DT 0x04000000 /* Disable Drop TCP/IP csum error */ +#define DMA_CONTROL_RSF 0x02000000 /* Receive Store and Forward */ +#define DMA_CONTROL_DFF 0x01000000 /* Disaable flushing */ +/* Theshold for Activating the FC */ +enum rfa { + act_full_minus_1 = 0x00800000, + act_full_minus_2 = 0x00800200, + act_full_minus_3 = 0x00800400, + act_full_minus_4 = 0x00800600, +}; +/* Theshold for Deactivating the FC */ +enum rfd { + deac_full_minus_1 = 0x00400000, + deac_full_minus_2 = 0x00400800, + deac_full_minus_3 = 0x00401000, + deac_full_minus_4 = 0x00401800, +}; +#define DMA_CONTROL_TSF 0x00200000 /* Transmit Store and Forward */ +#define DMA_CONTROL_FTF 0x00100000 /* Flush transmit FIFO */ + +enum ttc_control { + DMA_CONTROL_TTC_64 = 0x00000000, + DMA_CONTROL_TTC_128 = 0x00004000, + DMA_CONTROL_TTC_192 = 0x00008000, + DMA_CONTROL_TTC_256 = 0x0000c000, + DMA_CONTROL_TTC_40 = 0x00010000, + DMA_CONTROL_TTC_32 = 0x00014000, + DMA_CONTROL_TTC_24 = 0x00018000, + DMA_CONTROL_TTC_16 = 0x0001c000, +}; +#define DMA_CONTROL_TC_TX_MASK 0xfffe3fff + +#define DMA_CONTROL_EFC 0x00000100 +#define DMA_CONTROL_FEF 0x00000080 +#define DMA_CONTROL_FUF 0x00000040 + +enum rtc_control { + DMA_CONTROL_RTC_64 = 0x00000000, + DMA_CONTROL_RTC_32 = 0x00000008, + DMA_CONTROL_RTC_96 = 0x00000010, + DMA_CONTROL_RTC_128 = 0x00000018, +}; +#define DMA_CONTROL_TC_RX_MASK 0xffffffe7 + +#define DMA_CONTROL_OSF 0x00000004 /* Operate on second frame */ + +/* MMC registers offset */ +#define GMAC_MMC_CTRL 0x100 +#define GMAC_MMC_RX_INTR 0x104 +#define GMAC_MMC_TX_INTR 0x108 +#define GMAC_MMC_RX_CSUM_OFFLOAD 0x208 diff --git a/drivers/net/stmmac/mac100.c b/drivers/net/stmmac/mac100.c new file mode 100644 index 000000000000..625171b6062b --- /dev/null +++ b/drivers/net/stmmac/mac100.c @@ -0,0 +1,517 @@ +/******************************************************************************* + This is the driver for the MAC 10/100 on-chip Ethernet controller + currently tested on all the ST boards based on STb7109 and stx7200 SoCs. + + DWC Ether MAC 10/100 Universal version 4.0 has been used for developing + this code. + + Copyright (C) 2007-2009 STMicroelectronics Ltd + + This program is free software; you can redistribute it and/or modify it + under the terms and conditions of the GNU General Public License, + version 2, as published by the Free Software Foundation. + + This program is distributed in the hope it will be useful, but WITHOUT + ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + more details. + + You should have received a copy of the GNU General Public License along with + this program; if not, write to the Free Software Foundation, Inc., + 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + + The full GNU General Public License is included in this distribution in + the file called "COPYING". + + Author: Giuseppe Cavallaro +*******************************************************************************/ + +#include +#include +#include +#include + +#include "common.h" +#include "mac100.h" + +#undef MAC100_DEBUG +/*#define MAC100_DEBUG*/ +#ifdef MAC100_DEBUG +#define DBG(fmt, args...) printk(fmt, ## args) +#else +#define DBG(fmt, args...) do { } while (0) +#endif + +static void mac100_core_init(unsigned long ioaddr) +{ + u32 value = readl(ioaddr + MAC_CONTROL); + + writel((value | MAC_CORE_INIT), ioaddr + MAC_CONTROL); + +#ifdef STMMAC_VLAN_TAG_USED + writel(ETH_P_8021Q, ioaddr + MAC_VLAN1); +#endif + return; +} + +static void mac100_dump_mac_regs(unsigned long ioaddr) +{ + pr_info("\t----------------------------------------------\n" + "\t MAC100 CSR (base addr = 0x%8x)\n" + "\t----------------------------------------------\n", + (unsigned int)ioaddr); + pr_info("\tcontrol reg (offset 0x%x): 0x%08x\n", MAC_CONTROL, + readl(ioaddr + MAC_CONTROL)); + pr_info("\taddr HI (offset 0x%x): 0x%08x\n ", MAC_ADDR_HIGH, + readl(ioaddr + MAC_ADDR_HIGH)); + pr_info("\taddr LO (offset 0x%x): 0x%08x\n", MAC_ADDR_LOW, + readl(ioaddr + MAC_ADDR_LOW)); + pr_info("\tmulticast hash HI (offset 0x%x): 0x%08x\n", + MAC_HASH_HIGH, readl(ioaddr + MAC_HASH_HIGH)); + pr_info("\tmulticast hash LO (offset 0x%x): 0x%08x\n", + MAC_HASH_LOW, readl(ioaddr + MAC_HASH_LOW)); + pr_info("\tflow control (offset 0x%x): 0x%08x\n", + MAC_FLOW_CTRL, readl(ioaddr + MAC_FLOW_CTRL)); + pr_info("\tVLAN1 tag (offset 0x%x): 0x%08x\n", MAC_VLAN1, + readl(ioaddr + MAC_VLAN1)); + pr_info("\tVLAN2 tag (offset 0x%x): 0x%08x\n", MAC_VLAN2, + readl(ioaddr + MAC_VLAN2)); + pr_info("\n\tMAC management counter registers\n"); + pr_info("\t MMC crtl (offset 0x%x): 0x%08x\n", + MMC_CONTROL, readl(ioaddr + MMC_CONTROL)); + pr_info("\t MMC High Interrupt (offset 0x%x): 0x%08x\n", + MMC_HIGH_INTR, readl(ioaddr + MMC_HIGH_INTR)); + pr_info("\t MMC Low Interrupt (offset 0x%x): 0x%08x\n", + MMC_LOW_INTR, readl(ioaddr + MMC_LOW_INTR)); + pr_info("\t MMC High Interrupt Mask (offset 0x%x): 0x%08x\n", + MMC_HIGH_INTR_MASK, readl(ioaddr + MMC_HIGH_INTR_MASK)); + pr_info("\t MMC Low Interrupt Mask (offset 0x%x): 0x%08x\n", + MMC_LOW_INTR_MASK, readl(ioaddr + MMC_LOW_INTR_MASK)); + return; +} + +static int mac100_dma_init(unsigned long ioaddr, int pbl, u32 dma_tx, + u32 dma_rx) +{ + u32 value = readl(ioaddr + DMA_BUS_MODE); + /* DMA SW reset */ + value |= DMA_BUS_MODE_SFT_RESET; + writel(value, ioaddr + DMA_BUS_MODE); + do {} while ((readl(ioaddr + DMA_BUS_MODE) & DMA_BUS_MODE_SFT_RESET)); + + /* Enable Application Access by writing to DMA CSR0 */ + writel(DMA_BUS_MODE_DEFAULT | (pbl << DMA_BUS_MODE_PBL_SHIFT), + ioaddr + DMA_BUS_MODE); + + /* Mask interrupts by writing to CSR7 */ + writel(DMA_INTR_DEFAULT_MASK, ioaddr + DMA_INTR_ENA); + + /* The base address of the RX/TX descriptor lists must be written into + * DMA CSR3 and CSR4, respectively. */ + writel(dma_tx, ioaddr + DMA_TX_BASE_ADDR); + writel(dma_rx, ioaddr + DMA_RCV_BASE_ADDR); + + return 0; +} + +/* Store and Forward capability is not used at all.. + * The transmit threshold can be programmed by + * setting the TTC bits in the DMA control register.*/ +static void mac100_dma_operation_mode(unsigned long ioaddr, int txmode, + int rxmode) +{ + u32 csr6 = readl(ioaddr + DMA_CONTROL); + + if (txmode <= 32) + csr6 |= DMA_CONTROL_TTC_32; + else if (txmode <= 64) + csr6 |= DMA_CONTROL_TTC_64; + else + csr6 |= DMA_CONTROL_TTC_128; + + writel(csr6, ioaddr + DMA_CONTROL); + + return; +} + +static void mac100_dump_dma_regs(unsigned long ioaddr) +{ + int i; + + DBG(KERN_DEBUG "MAC100 DMA CSR \n"); + for (i = 0; i < 9; i++) + pr_debug("\t CSR%d (offset 0x%x): 0x%08x\n", i, + (DMA_BUS_MODE + i * 4), + readl(ioaddr + DMA_BUS_MODE + i * 4)); + DBG(KERN_DEBUG "\t CSR20 (offset 0x%x): 0x%08x\n", + DMA_CUR_TX_BUF_ADDR, readl(ioaddr + DMA_CUR_TX_BUF_ADDR)); + DBG(KERN_DEBUG "\t CSR21 (offset 0x%x): 0x%08x\n", + DMA_CUR_RX_BUF_ADDR, readl(ioaddr + DMA_CUR_RX_BUF_ADDR)); + return; +} + +/* DMA controller has two counters to track the number of + the receive missed frames. */ +static void mac100_dma_diagnostic_fr(void *data, struct stmmac_extra_stats *x, + unsigned long ioaddr) +{ + struct net_device_stats *stats = (struct net_device_stats *)data; + u32 csr8 = readl(ioaddr + DMA_MISSED_FRAME_CTR); + + if (unlikely(csr8)) { + if (csr8 & DMA_MISSED_FRAME_OVE) { + stats->rx_over_errors += 0x800; + x->rx_overflow_cntr += 0x800; + } else { + unsigned int ove_cntr; + ove_cntr = ((csr8 & DMA_MISSED_FRAME_OVE_CNTR) >> 17); + stats->rx_over_errors += ove_cntr; + x->rx_overflow_cntr += ove_cntr; + } + + if (csr8 & DMA_MISSED_FRAME_OVE_M) { + stats->rx_missed_errors += 0xffff; + x->rx_missed_cntr += 0xffff; + } else { + unsigned int miss_f = (csr8 & DMA_MISSED_FRAME_M_CNTR); + stats->rx_missed_errors += miss_f; + x->rx_missed_cntr += miss_f; + } + } + return; +} + +static int mac100_get_tx_frame_status(void *data, struct stmmac_extra_stats *x, + struct dma_desc *p, unsigned long ioaddr) +{ + int ret = 0; + struct net_device_stats *stats = (struct net_device_stats *)data; + + if (unlikely(p->des01.tx.error_summary)) { + if (unlikely(p->des01.tx.underflow_error)) { + x->tx_underflow++; + stats->tx_fifo_errors++; + } + if (unlikely(p->des01.tx.no_carrier)) { + x->tx_carrier++; + stats->tx_carrier_errors++; + } + if (unlikely(p->des01.tx.loss_carrier)) { + x->tx_losscarrier++; + stats->tx_carrier_errors++; + } + if (unlikely((p->des01.tx.excessive_deferral) || + (p->des01.tx.excessive_collisions) || + (p->des01.tx.late_collision))) + stats->collisions += p->des01.tx.collision_count; + ret = -1; + } + if (unlikely(p->des01.tx.heartbeat_fail)) { + x->tx_heartbeat++; + stats->tx_heartbeat_errors++; + ret = -1; + } + if (unlikely(p->des01.tx.deferred)) + x->tx_deferred++; + + return ret; +} + +static int mac100_get_tx_len(struct dma_desc *p) +{ + return p->des01.tx.buffer1_size; +} + +/* This function verifies if each incoming frame has some errors + * and, if required, updates the multicast statistics. + * In case of success, it returns csum_none becasue the device + * is not able to compute the csum in HW. */ +static int mac100_get_rx_frame_status(void *data, struct stmmac_extra_stats *x, + struct dma_desc *p) +{ + int ret = csum_none; + struct net_device_stats *stats = (struct net_device_stats *)data; + + if (unlikely(p->des01.rx.last_descriptor == 0)) { + pr_warning("mac100 Error: Oversized Ethernet " + "frame spanned multiple buffers\n"); + stats->rx_length_errors++; + return discard_frame; + } + + if (unlikely(p->des01.rx.error_summary)) { + if (unlikely(p->des01.rx.descriptor_error)) + x->rx_desc++; + if (unlikely(p->des01.rx.partial_frame_error)) + x->rx_partial++; + if (unlikely(p->des01.rx.run_frame)) + x->rx_runt++; + if (unlikely(p->des01.rx.frame_too_long)) + x->rx_toolong++; + if (unlikely(p->des01.rx.collision)) { + x->rx_collision++; + stats->collisions++; + } + if (unlikely(p->des01.rx.crc_error)) { + x->rx_crc++; + stats->rx_crc_errors++; + } + ret = discard_frame; + } + if (unlikely(p->des01.rx.dribbling)) + ret = discard_frame; + + if (unlikely(p->des01.rx.length_error)) { + x->rx_lenght++; + ret = discard_frame; + } + if (unlikely(p->des01.rx.mii_error)) { + x->rx_mii++; + ret = discard_frame; + } + if (p->des01.rx.multicast_frame) { + x->rx_multicast++; + stats->multicast++; + } + return ret; +} + +static void mac100_irq_status(unsigned long ioaddr) +{ + return; +} + +static void mac100_set_umac_addr(unsigned long ioaddr, unsigned char *addr, + unsigned int reg_n) +{ + stmmac_set_mac_addr(ioaddr, addr, MAC_ADDR_HIGH, MAC_ADDR_LOW); +} + +static void mac100_get_umac_addr(unsigned long ioaddr, unsigned char *addr, + unsigned int reg_n) +{ + stmmac_get_mac_addr(ioaddr, addr, MAC_ADDR_HIGH, MAC_ADDR_LOW); +} + +static void mac100_set_filter(struct net_device *dev) +{ + unsigned long ioaddr = dev->base_addr; + u32 value = readl(ioaddr + MAC_CONTROL); + + if (dev->flags & IFF_PROMISC) { + value |= MAC_CONTROL_PR; + value &= ~(MAC_CONTROL_PM | MAC_CONTROL_IF | MAC_CONTROL_HO | + MAC_CONTROL_HP); + } else if ((dev->mc_count > HASH_TABLE_SIZE) + || (dev->flags & IFF_ALLMULTI)) { + value |= MAC_CONTROL_PM; + value &= ~(MAC_CONTROL_PR | MAC_CONTROL_IF | MAC_CONTROL_HO); + writel(0xffffffff, ioaddr + MAC_HASH_HIGH); + writel(0xffffffff, ioaddr + MAC_HASH_LOW); + } else if (dev->mc_count == 0) { /* no multicast */ + value &= ~(MAC_CONTROL_PM | MAC_CONTROL_PR | MAC_CONTROL_IF | + MAC_CONTROL_HO | MAC_CONTROL_HP); + } else { + int i; + u32 mc_filter[2]; + struct dev_mc_list *mclist; + + /* Perfect filter mode for physical address and Hash + filter for multicast */ + value |= MAC_CONTROL_HP; + value &= ~(MAC_CONTROL_PM | MAC_CONTROL_PR | MAC_CONTROL_IF + | MAC_CONTROL_HO); + + memset(mc_filter, 0, sizeof(mc_filter)); + for (i = 0, mclist = dev->mc_list; + mclist && i < dev->mc_count; i++, mclist = mclist->next) { + /* The upper 6 bits of the calculated CRC are used to + * index the contens of the hash table */ + int bit_nr = + ether_crc(ETH_ALEN, mclist->dmi_addr) >> 26; + /* The most significant bit determines the register to + * use (H/L) while the other 5 bits determine the bit + * within the register. */ + mc_filter[bit_nr >> 5] |= 1 << (bit_nr & 31); + } + writel(mc_filter[0], ioaddr + MAC_HASH_LOW); + writel(mc_filter[1], ioaddr + MAC_HASH_HIGH); + } + + writel(value, ioaddr + MAC_CONTROL); + + DBG(KERN_INFO "%s: CTRL reg: 0x%08x Hash regs: " + "HI 0x%08x, LO 0x%08x\n", + __func__, readl(ioaddr + MAC_CONTROL), + readl(ioaddr + MAC_HASH_HIGH), readl(ioaddr + MAC_HASH_LOW)); + return; +} + +static void mac100_flow_ctrl(unsigned long ioaddr, unsigned int duplex, + unsigned int fc, unsigned int pause_time) +{ + unsigned int flow = MAC_FLOW_CTRL_ENABLE; + + if (duplex) + flow |= (pause_time << MAC_FLOW_CTRL_PT_SHIFT); + writel(flow, ioaddr + MAC_FLOW_CTRL); + + return; +} + +/* No PMT module supported in our SoC for the Ethernet Controller. */ +static void mac100_pmt(unsigned long ioaddr, unsigned long mode) +{ + return; +} + +static void mac100_init_rx_desc(struct dma_desc *p, unsigned int ring_size, + int disable_rx_ic) +{ + int i; + for (i = 0; i < ring_size; i++) { + p->des01.rx.own = 1; + p->des01.rx.buffer1_size = BUF_SIZE_2KiB - 1; + if (i == ring_size - 1) + p->des01.rx.end_ring = 1; + if (disable_rx_ic) + p->des01.rx.disable_ic = 1; + p++; + } + return; +} + +static void mac100_init_tx_desc(struct dma_desc *p, unsigned int ring_size) +{ + int i; + for (i = 0; i < ring_size; i++) { + p->des01.tx.own = 0; + if (i == ring_size - 1) + p->des01.tx.end_ring = 1; + p++; + } + return; +} + +static int mac100_get_tx_owner(struct dma_desc *p) +{ + return p->des01.tx.own; +} + +static int mac100_get_rx_owner(struct dma_desc *p) +{ + return p->des01.rx.own; +} + +static void mac100_set_tx_owner(struct dma_desc *p) +{ + p->des01.tx.own = 1; +} + +static void mac100_set_rx_owner(struct dma_desc *p) +{ + p->des01.rx.own = 1; +} + +static int mac100_get_tx_ls(struct dma_desc *p) +{ + return p->des01.tx.last_segment; +} + +static void mac100_release_tx_desc(struct dma_desc *p) +{ + int ter = p->des01.tx.end_ring; + + /* clean field used within the xmit */ + p->des01.tx.first_segment = 0; + p->des01.tx.last_segment = 0; + p->des01.tx.buffer1_size = 0; + + /* clean status reported */ + p->des01.tx.error_summary = 0; + p->des01.tx.underflow_error = 0; + p->des01.tx.no_carrier = 0; + p->des01.tx.loss_carrier = 0; + p->des01.tx.excessive_deferral = 0; + p->des01.tx.excessive_collisions = 0; + p->des01.tx.late_collision = 0; + p->des01.tx.heartbeat_fail = 0; + p->des01.tx.deferred = 0; + + /* set termination field */ + p->des01.tx.end_ring = ter; + + return; +} + +static void mac100_prepare_tx_desc(struct dma_desc *p, int is_fs, int len, + int csum_flag) +{ + p->des01.tx.first_segment = is_fs; + p->des01.tx.buffer1_size = len; +} + +static void mac100_clear_tx_ic(struct dma_desc *p) +{ + p->des01.tx.interrupt = 0; +} + +static void mac100_close_tx_desc(struct dma_desc *p) +{ + p->des01.tx.last_segment = 1; + p->des01.tx.interrupt = 1; +} + +static int mac100_get_rx_frame_len(struct dma_desc *p) +{ + return p->des01.rx.frame_length; +} + +struct stmmac_ops mac100_driver = { + .core_init = mac100_core_init, + .dump_mac_regs = mac100_dump_mac_regs, + .dma_init = mac100_dma_init, + .dump_dma_regs = mac100_dump_dma_regs, + .dma_mode = mac100_dma_operation_mode, + .dma_diagnostic_fr = mac100_dma_diagnostic_fr, + .tx_status = mac100_get_tx_frame_status, + .rx_status = mac100_get_rx_frame_status, + .get_tx_len = mac100_get_tx_len, + .set_filter = mac100_set_filter, + .flow_ctrl = mac100_flow_ctrl, + .pmt = mac100_pmt, + .init_rx_desc = mac100_init_rx_desc, + .init_tx_desc = mac100_init_tx_desc, + .get_tx_owner = mac100_get_tx_owner, + .get_rx_owner = mac100_get_rx_owner, + .release_tx_desc = mac100_release_tx_desc, + .prepare_tx_desc = mac100_prepare_tx_desc, + .clear_tx_ic = mac100_clear_tx_ic, + .close_tx_desc = mac100_close_tx_desc, + .get_tx_ls = mac100_get_tx_ls, + .set_tx_owner = mac100_set_tx_owner, + .set_rx_owner = mac100_set_rx_owner, + .get_rx_frame_len = mac100_get_rx_frame_len, + .host_irq_status = mac100_irq_status, + .set_umac_addr = mac100_set_umac_addr, + .get_umac_addr = mac100_get_umac_addr, +}; + +struct mac_device_info *mac100_setup(unsigned long ioaddr) +{ + struct mac_device_info *mac; + + mac = kzalloc(sizeof(const struct mac_device_info), GFP_KERNEL); + + pr_info("\tMAC 10/100\n"); + + mac->ops = &mac100_driver; + mac->hw.pmt = PMT_NOT_SUPPORTED; + mac->hw.link.port = MAC_CONTROL_PS; + mac->hw.link.duplex = MAC_CONTROL_F; + mac->hw.link.speed = 0; + mac->hw.mii.addr = MAC_MII_ADDR; + mac->hw.mii.data = MAC_MII_DATA; + + return mac; +} diff --git a/drivers/net/stmmac/mac100.h b/drivers/net/stmmac/mac100.h new file mode 100644 index 000000000000..0f8f110d004a --- /dev/null +++ b/drivers/net/stmmac/mac100.h @@ -0,0 +1,116 @@ +/******************************************************************************* + MAC 10/100 Header File + + Copyright (C) 2007-2009 STMicroelectronics Ltd + + This program is free software; you can redistribute it and/or modify it + under the terms and conditions of the GNU General Public License, + version 2, as published by the Free Software Foundation. + + This program is distributed in the hope it will be useful, but WITHOUT + ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + more details. + + You should have received a copy of the GNU General Public License along with + this program; if not, write to the Free Software Foundation, Inc., + 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + + The full GNU General Public License is included in this distribution in + the file called "COPYING". + + Author: Giuseppe Cavallaro +*******************************************************************************/ + +/*---------------------------------------------------------------------------- + * MAC BLOCK defines + *---------------------------------------------------------------------------*/ +/* MAC CSR offset */ +#define MAC_CONTROL 0x00000000 /* MAC Control */ +#define MAC_ADDR_HIGH 0x00000004 /* MAC Address High */ +#define MAC_ADDR_LOW 0x00000008 /* MAC Address Low */ +#define MAC_HASH_HIGH 0x0000000c /* Multicast Hash Table High */ +#define MAC_HASH_LOW 0x00000010 /* Multicast Hash Table Low */ +#define MAC_MII_ADDR 0x00000014 /* MII Address */ +#define MAC_MII_DATA 0x00000018 /* MII Data */ +#define MAC_FLOW_CTRL 0x0000001c /* Flow Control */ +#define MAC_VLAN1 0x00000020 /* VLAN1 Tag */ +#define MAC_VLAN2 0x00000024 /* VLAN2 Tag */ + +/* MAC CTRL defines */ +#define MAC_CONTROL_RA 0x80000000 /* Receive All Mode */ +#define MAC_CONTROL_BLE 0x40000000 /* Endian Mode */ +#define MAC_CONTROL_HBD 0x10000000 /* Heartbeat Disable */ +#define MAC_CONTROL_PS 0x08000000 /* Port Select */ +#define MAC_CONTROL_DRO 0x00800000 /* Disable Receive Own */ +#define MAC_CONTROL_EXT_LOOPBACK 0x00400000 /* Reserved (ext loopback?) */ +#define MAC_CONTROL_OM 0x00200000 /* Loopback Operating Mode */ +#define MAC_CONTROL_F 0x00100000 /* Full Duplex Mode */ +#define MAC_CONTROL_PM 0x00080000 /* Pass All Multicast */ +#define MAC_CONTROL_PR 0x00040000 /* Promiscuous Mode */ +#define MAC_CONTROL_IF 0x00020000 /* Inverse Filtering */ +#define MAC_CONTROL_PB 0x00010000 /* Pass Bad Frames */ +#define MAC_CONTROL_HO 0x00008000 /* Hash Only Filtering Mode */ +#define MAC_CONTROL_HP 0x00002000 /* Hash/Perfect Filtering Mode */ +#define MAC_CONTROL_LCC 0x00001000 /* Late Collision Control */ +#define MAC_CONTROL_DBF 0x00000800 /* Disable Broadcast Frames */ +#define MAC_CONTROL_DRTY 0x00000400 /* Disable Retry */ +#define MAC_CONTROL_ASTP 0x00000100 /* Automatic Pad Stripping */ +#define MAC_CONTROL_BOLMT_10 0x00000000 /* Back Off Limit 10 */ +#define MAC_CONTROL_BOLMT_8 0x00000040 /* Back Off Limit 8 */ +#define MAC_CONTROL_BOLMT_4 0x00000080 /* Back Off Limit 4 */ +#define MAC_CONTROL_BOLMT_1 0x000000c0 /* Back Off Limit 1 */ +#define MAC_CONTROL_DC 0x00000020 /* Deferral Check */ +#define MAC_CONTROL_TE 0x00000008 /* Transmitter Enable */ +#define MAC_CONTROL_RE 0x00000004 /* Receiver Enable */ + +#define MAC_CORE_INIT (MAC_CONTROL_HBD | MAC_CONTROL_ASTP) + +/* MAC FLOW CTRL defines */ +#define MAC_FLOW_CTRL_PT_MASK 0xffff0000 /* Pause Time Mask */ +#define MAC_FLOW_CTRL_PT_SHIFT 16 +#define MAC_FLOW_CTRL_PASS 0x00000004 /* Pass Control Frames */ +#define MAC_FLOW_CTRL_ENABLE 0x00000002 /* Flow Control Enable */ +#define MAC_FLOW_CTRL_PAUSE 0x00000001 /* Flow Control Busy ... */ + +/* MII ADDR defines */ +#define MAC_MII_ADDR_WRITE 0x00000002 /* MII Write */ +#define MAC_MII_ADDR_BUSY 0x00000001 /* MII Busy */ + +/*---------------------------------------------------------------------------- + * DMA BLOCK defines + *---------------------------------------------------------------------------*/ + +/* DMA Bus Mode register defines */ +#define DMA_BUS_MODE_DBO 0x00100000 /* Descriptor Byte Ordering */ +#define DMA_BUS_MODE_BLE 0x00000080 /* Big Endian/Little Endian */ +#define DMA_BUS_MODE_PBL_MASK 0x00003f00 /* Programmable Burst Len */ +#define DMA_BUS_MODE_PBL_SHIFT 8 +#define DMA_BUS_MODE_DSL_MASK 0x0000007c /* Descriptor Skip Length */ +#define DMA_BUS_MODE_DSL_SHIFT 2 /* (in DWORDS) */ +#define DMA_BUS_MODE_BAR_BUS 0x00000002 /* Bar-Bus Arbitration */ +#define DMA_BUS_MODE_SFT_RESET 0x00000001 /* Software Reset */ +#define DMA_BUS_MODE_DEFAULT 0x00000000 + +/* DMA Control register defines */ +#define DMA_CONTROL_SF 0x00200000 /* Store And Forward */ + +/* Transmit Threshold Control */ +enum ttc_control { + DMA_CONTROL_TTC_DEFAULT = 0x00000000, /* Threshold is 32 DWORDS */ + DMA_CONTROL_TTC_64 = 0x00004000, /* Threshold is 64 DWORDS */ + DMA_CONTROL_TTC_128 = 0x00008000, /* Threshold is 128 DWORDS */ + DMA_CONTROL_TTC_256 = 0x0000c000, /* Threshold is 256 DWORDS */ + DMA_CONTROL_TTC_18 = 0x00400000, /* Threshold is 18 DWORDS */ + DMA_CONTROL_TTC_24 = 0x00404000, /* Threshold is 24 DWORDS */ + DMA_CONTROL_TTC_32 = 0x00408000, /* Threshold is 32 DWORDS */ + DMA_CONTROL_TTC_40 = 0x0040c000, /* Threshold is 40 DWORDS */ + DMA_CONTROL_SE = 0x00000008, /* Stop On Empty */ + DMA_CONTROL_OSF = 0x00000004, /* Operate On 2nd Frame */ +}; + +/* STMAC110 DMA Missed Frame Counter register defines */ +#define DMA_MISSED_FRAME_OVE 0x10000000 /* FIFO Overflow Overflow */ +#define DMA_MISSED_FRAME_OVE_CNTR 0x0ffe0000 /* Overflow Frame Counter */ +#define DMA_MISSED_FRAME_OVE_M 0x00010000 /* Missed Frame Overflow */ +#define DMA_MISSED_FRAME_M_CNTR 0x0000ffff /* Missed Frame Couinter */ diff --git a/drivers/net/stmmac/stmmac.h b/drivers/net/stmmac/stmmac.h new file mode 100644 index 000000000000..6d2eae3040e5 --- /dev/null +++ b/drivers/net/stmmac/stmmac.h @@ -0,0 +1,98 @@ +/******************************************************************************* + Copyright (C) 2007-2009 STMicroelectronics Ltd + + This program is free software; you can redistribute it and/or modify it + under the terms and conditions of the GNU General Public License, + version 2, as published by the Free Software Foundation. + + This program is distributed in the hope it will be useful, but WITHOUT + ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + more details. + + You should have received a copy of the GNU General Public License along with + this program; if not, write to the Free Software Foundation, Inc., + 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + + The full GNU General Public License is included in this distribution in + the file called "COPYING". + + Author: Giuseppe Cavallaro +*******************************************************************************/ + +#define DRV_MODULE_VERSION "Oct_09" + +#if defined(CONFIG_VLAN_8021Q) || defined(CONFIG_VLAN_8021Q_MODULE) +#define STMMAC_VLAN_TAG_USED +#include +#endif + +#include "common.h" +#ifdef CONFIG_STMMAC_TIMER +#include "stmmac_timer.h" +#endif + +struct stmmac_priv { + /* Frequently used values are kept adjacent for cache effect */ + struct dma_desc *dma_tx ____cacheline_aligned; + dma_addr_t dma_tx_phy; + struct sk_buff **tx_skbuff; + unsigned int cur_tx; + unsigned int dirty_tx; + unsigned int dma_tx_size; + int tx_coe; + int tx_coalesce; + + struct dma_desc *dma_rx ; + unsigned int cur_rx; + unsigned int dirty_rx; + struct sk_buff **rx_skbuff; + dma_addr_t *rx_skbuff_dma; + struct sk_buff_head rx_recycle; + + struct net_device *dev; + int is_gmac; + dma_addr_t dma_rx_phy; + unsigned int dma_rx_size; + int rx_csum; + unsigned int dma_buf_sz; + struct device *device; + struct mac_device_info *mac_type; + + struct stmmac_extra_stats xstats; + struct napi_struct napi; + + phy_interface_t phy_interface; + int pbl; + int bus_id; + int phy_addr; + int phy_mask; + int (*phy_reset) (void *priv); + void (*fix_mac_speed) (void *priv, unsigned int speed); + void *bsp_priv; + + int phy_irq; + struct phy_device *phydev; + int oldlink; + int speed; + int oldduplex; + unsigned int flow_ctrl; + unsigned int pause; + struct mii_bus *mii; + + u32 msg_enable; + spinlock_t lock; + int wolopts; + int wolenabled; + int shutdown; +#ifdef CONFIG_STMMAC_TIMER + struct stmmac_timer *tm; +#endif +#ifdef STMMAC_VLAN_TAG_USED + struct vlan_group *vlgrp; +#endif +}; + +extern int stmmac_mdio_unregister(struct net_device *ndev); +extern int stmmac_mdio_register(struct net_device *ndev); +extern void stmmac_set_ethtool_ops(struct net_device *netdev); diff --git a/drivers/net/stmmac/stmmac_ethtool.c b/drivers/net/stmmac/stmmac_ethtool.c new file mode 100644 index 000000000000..694ebe6a0758 --- /dev/null +++ b/drivers/net/stmmac/stmmac_ethtool.c @@ -0,0 +1,395 @@ +/******************************************************************************* + STMMAC Ethtool support + + Copyright (C) 2007-2009 STMicroelectronics Ltd + + This program is free software; you can redistribute it and/or modify it + under the terms and conditions of the GNU General Public License, + version 2, as published by the Free Software Foundation. + + This program is distributed in the hope it will be useful, but WITHOUT + ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + more details. + + You should have received a copy of the GNU General Public License along with + this program; if not, write to the Free Software Foundation, Inc., + 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + + The full GNU General Public License is included in this distribution in + the file called "COPYING". + + Author: Giuseppe Cavallaro +*******************************************************************************/ + +#include +#include +#include +#include + +#include "stmmac.h" + +#define REG_SPACE_SIZE 0x1054 +#define MAC100_ETHTOOL_NAME "st_mac100" +#define GMAC_ETHTOOL_NAME "st_gmac" + +struct stmmac_stats { + char stat_string[ETH_GSTRING_LEN]; + int sizeof_stat; + int stat_offset; +}; + +#define STMMAC_STAT(m) \ + { #m, FIELD_SIZEOF(struct stmmac_extra_stats, m), \ + offsetof(struct stmmac_priv, xstats.m)} + +static const struct stmmac_stats stmmac_gstrings_stats[] = { + STMMAC_STAT(tx_underflow), + STMMAC_STAT(tx_carrier), + STMMAC_STAT(tx_losscarrier), + STMMAC_STAT(tx_heartbeat), + STMMAC_STAT(tx_deferred), + STMMAC_STAT(tx_vlan), + STMMAC_STAT(rx_vlan), + STMMAC_STAT(tx_jabber), + STMMAC_STAT(tx_frame_flushed), + STMMAC_STAT(tx_payload_error), + STMMAC_STAT(tx_ip_header_error), + STMMAC_STAT(rx_desc), + STMMAC_STAT(rx_partial), + STMMAC_STAT(rx_runt), + STMMAC_STAT(rx_toolong), + STMMAC_STAT(rx_collision), + STMMAC_STAT(rx_crc), + STMMAC_STAT(rx_lenght), + STMMAC_STAT(rx_mii), + STMMAC_STAT(rx_multicast), + STMMAC_STAT(rx_gmac_overflow), + STMMAC_STAT(rx_watchdog), + STMMAC_STAT(da_rx_filter_fail), + STMMAC_STAT(sa_rx_filter_fail), + STMMAC_STAT(rx_missed_cntr), + STMMAC_STAT(rx_overflow_cntr), + STMMAC_STAT(tx_undeflow_irq), + STMMAC_STAT(tx_process_stopped_irq), + STMMAC_STAT(tx_jabber_irq), + STMMAC_STAT(rx_overflow_irq), + STMMAC_STAT(rx_buf_unav_irq), + STMMAC_STAT(rx_process_stopped_irq), + STMMAC_STAT(rx_watchdog_irq), + STMMAC_STAT(tx_early_irq), + STMMAC_STAT(fatal_bus_error_irq), + STMMAC_STAT(threshold), + STMMAC_STAT(tx_pkt_n), + STMMAC_STAT(rx_pkt_n), + STMMAC_STAT(poll_n), + STMMAC_STAT(sched_timer_n), + STMMAC_STAT(normal_irq_n), +}; +#define STMMAC_STATS_LEN ARRAY_SIZE(stmmac_gstrings_stats) + +void stmmac_ethtool_getdrvinfo(struct net_device *dev, + struct ethtool_drvinfo *info) +{ + struct stmmac_priv *priv = netdev_priv(dev); + + if (!priv->is_gmac) + strcpy(info->driver, MAC100_ETHTOOL_NAME); + else + strcpy(info->driver, GMAC_ETHTOOL_NAME); + + strcpy(info->version, DRV_MODULE_VERSION); + info->fw_version[0] = '\0'; + info->n_stats = STMMAC_STATS_LEN; + return; +} + +int stmmac_ethtool_getsettings(struct net_device *dev, struct ethtool_cmd *cmd) +{ + struct stmmac_priv *priv = netdev_priv(dev); + struct phy_device *phy = priv->phydev; + int rc; + if (phy == NULL) { + pr_err("%s: %s: PHY is not registered\n", + __func__, dev->name); + return -ENODEV; + } + if (!netif_running(dev)) { + pr_err("%s: interface is disabled: we cannot track " + "link speed / duplex setting\n", dev->name); + return -EBUSY; + } + cmd->transceiver = XCVR_INTERNAL; + spin_lock_irq(&priv->lock); + rc = phy_ethtool_gset(phy, cmd); + spin_unlock_irq(&priv->lock); + return rc; +} + +int stmmac_ethtool_setsettings(struct net_device *dev, struct ethtool_cmd *cmd) +{ + struct stmmac_priv *priv = netdev_priv(dev); + struct phy_device *phy = priv->phydev; + int rc; + + spin_lock(&priv->lock); + rc = phy_ethtool_sset(phy, cmd); + spin_unlock(&priv->lock); + + return rc; +} + +u32 stmmac_ethtool_getmsglevel(struct net_device *dev) +{ + struct stmmac_priv *priv = netdev_priv(dev); + return priv->msg_enable; +} + +void stmmac_ethtool_setmsglevel(struct net_device *dev, u32 level) +{ + struct stmmac_priv *priv = netdev_priv(dev); + priv->msg_enable = level; + +} + +int stmmac_check_if_running(struct net_device *dev) +{ + if (!netif_running(dev)) + return -EBUSY; + return 0; +} + +int stmmac_ethtool_get_regs_len(struct net_device *dev) +{ + return REG_SPACE_SIZE; +} + +void stmmac_ethtool_gregs(struct net_device *dev, + struct ethtool_regs *regs, void *space) +{ + int i; + u32 *reg_space = (u32 *) space; + + struct stmmac_priv *priv = netdev_priv(dev); + + memset(reg_space, 0x0, REG_SPACE_SIZE); + + if (!priv->is_gmac) { + /* MAC registers */ + for (i = 0; i < 12; i++) + reg_space[i] = readl(dev->base_addr + (i * 4)); + /* DMA registers */ + for (i = 0; i < 9; i++) + reg_space[i + 12] = + readl(dev->base_addr + (DMA_BUS_MODE + (i * 4))); + reg_space[22] = readl(dev->base_addr + DMA_CUR_TX_BUF_ADDR); + reg_space[23] = readl(dev->base_addr + DMA_CUR_RX_BUF_ADDR); + } else { + /* MAC registers */ + for (i = 0; i < 55; i++) + reg_space[i] = readl(dev->base_addr + (i * 4)); + /* DMA registers */ + for (i = 0; i < 22; i++) + reg_space[i + 55] = + readl(dev->base_addr + (DMA_BUS_MODE + (i * 4))); + } + + return; +} + +int stmmac_ethtool_set_tx_csum(struct net_device *netdev, u32 data) +{ + if (data) + netdev->features |= NETIF_F_HW_CSUM; + else + netdev->features &= ~NETIF_F_HW_CSUM; + + return 0; +} + +u32 stmmac_ethtool_get_rx_csum(struct net_device *dev) +{ + struct stmmac_priv *priv = netdev_priv(dev); + + return priv->rx_csum; +} + +static void +stmmac_get_pauseparam(struct net_device *netdev, + struct ethtool_pauseparam *pause) +{ + struct stmmac_priv *priv = netdev_priv(netdev); + + spin_lock(&priv->lock); + + pause->rx_pause = 0; + pause->tx_pause = 0; + pause->autoneg = priv->phydev->autoneg; + + if (priv->flow_ctrl & FLOW_RX) + pause->rx_pause = 1; + if (priv->flow_ctrl & FLOW_TX) + pause->tx_pause = 1; + + spin_unlock(&priv->lock); + return; +} + +static int +stmmac_set_pauseparam(struct net_device *netdev, + struct ethtool_pauseparam *pause) +{ + struct stmmac_priv *priv = netdev_priv(netdev); + struct phy_device *phy = priv->phydev; + int new_pause = FLOW_OFF; + int ret = 0; + + spin_lock(&priv->lock); + + if (pause->rx_pause) + new_pause |= FLOW_RX; + if (pause->tx_pause) + new_pause |= FLOW_TX; + + priv->flow_ctrl = new_pause; + + if (phy->autoneg) { + if (netif_running(netdev)) { + struct ethtool_cmd cmd; + /* auto-negotiation automatically restarted */ + cmd.cmd = ETHTOOL_NWAY_RST; + cmd.supported = phy->supported; + cmd.advertising = phy->advertising; + cmd.autoneg = phy->autoneg; + cmd.speed = phy->speed; + cmd.duplex = phy->duplex; + cmd.phy_address = phy->addr; + ret = phy_ethtool_sset(phy, &cmd); + } + } else { + unsigned long ioaddr = netdev->base_addr; + priv->mac_type->ops->flow_ctrl(ioaddr, phy->duplex, + priv->flow_ctrl, priv->pause); + } + spin_unlock(&priv->lock); + return ret; +} + +static void stmmac_get_ethtool_stats(struct net_device *dev, + struct ethtool_stats *dummy, u64 *data) +{ + struct stmmac_priv *priv = netdev_priv(dev); + unsigned long ioaddr = dev->base_addr; + int i; + + /* Update HW stats if supported */ + priv->mac_type->ops->dma_diagnostic_fr(&dev->stats, &priv->xstats, + ioaddr); + + for (i = 0; i < STMMAC_STATS_LEN; i++) { + char *p = (char *)priv + stmmac_gstrings_stats[i].stat_offset; + data[i] = (stmmac_gstrings_stats[i].sizeof_stat == + sizeof(u64)) ? (*(u64 *)p) : (*(u32 *)p); + } + + return; +} + +static int stmmac_get_sset_count(struct net_device *netdev, int sset) +{ + switch (sset) { + case ETH_SS_STATS: + return STMMAC_STATS_LEN; + default: + return -EOPNOTSUPP; + } +} + +static void stmmac_get_strings(struct net_device *dev, u32 stringset, u8 *data) +{ + int i; + u8 *p = data; + + switch (stringset) { + case ETH_SS_STATS: + for (i = 0; i < STMMAC_STATS_LEN; i++) { + memcpy(p, stmmac_gstrings_stats[i].stat_string, + ETH_GSTRING_LEN); + p += ETH_GSTRING_LEN; + } + break; + default: + WARN_ON(1); + break; + } + return; +} + +/* Currently only support WOL through Magic packet. */ +static void stmmac_get_wol(struct net_device *dev, struct ethtool_wolinfo *wol) +{ + struct stmmac_priv *priv = netdev_priv(dev); + + spin_lock_irq(&priv->lock); + if (priv->wolenabled == PMT_SUPPORTED) { + wol->supported = WAKE_MAGIC; + wol->wolopts = priv->wolopts; + } + spin_unlock_irq(&priv->lock); +} + +static int stmmac_set_wol(struct net_device *dev, struct ethtool_wolinfo *wol) +{ + struct stmmac_priv *priv = netdev_priv(dev); + u32 support = WAKE_MAGIC; + + if (priv->wolenabled == PMT_NOT_SUPPORTED) + return -EINVAL; + + if (wol->wolopts & ~support) + return -EINVAL; + + if (wol->wolopts == 0) + device_set_wakeup_enable(priv->device, 0); + else + device_set_wakeup_enable(priv->device, 1); + + spin_lock_irq(&priv->lock); + priv->wolopts = wol->wolopts; + spin_unlock_irq(&priv->lock); + + return 0; +} + +static struct ethtool_ops stmmac_ethtool_ops = { + .begin = stmmac_check_if_running, + .get_drvinfo = stmmac_ethtool_getdrvinfo, + .get_settings = stmmac_ethtool_getsettings, + .set_settings = stmmac_ethtool_setsettings, + .get_msglevel = stmmac_ethtool_getmsglevel, + .set_msglevel = stmmac_ethtool_setmsglevel, + .get_regs = stmmac_ethtool_gregs, + .get_regs_len = stmmac_ethtool_get_regs_len, + .get_link = ethtool_op_get_link, + .get_rx_csum = stmmac_ethtool_get_rx_csum, + .get_tx_csum = ethtool_op_get_tx_csum, + .set_tx_csum = stmmac_ethtool_set_tx_csum, + .get_sg = ethtool_op_get_sg, + .set_sg = ethtool_op_set_sg, + .get_pauseparam = stmmac_get_pauseparam, + .set_pauseparam = stmmac_set_pauseparam, + .get_ethtool_stats = stmmac_get_ethtool_stats, + .get_strings = stmmac_get_strings, + .get_wol = stmmac_get_wol, + .set_wol = stmmac_set_wol, + .get_sset_count = stmmac_get_sset_count, +#ifdef NETIF_F_TSO + .get_tso = ethtool_op_get_tso, + .set_tso = ethtool_op_set_tso, +#endif +}; + +void stmmac_set_ethtool_ops(struct net_device *netdev) +{ + SET_ETHTOOL_OPS(netdev, &stmmac_ethtool_ops); +} diff --git a/drivers/net/stmmac/stmmac_main.c b/drivers/net/stmmac/stmmac_main.c new file mode 100644 index 000000000000..c2f14dc9ba28 --- /dev/null +++ b/drivers/net/stmmac/stmmac_main.c @@ -0,0 +1,2204 @@ +/******************************************************************************* + This is the driver for the ST MAC 10/100/1000 on-chip Ethernet controllers. + ST Ethernet IPs are built around a Synopsys IP Core. + + Copyright (C) 2007-2009 STMicroelectronics Ltd + + This program is free software; you can redistribute it and/or modify it + under the terms and conditions of the GNU General Public License, + version 2, as published by the Free Software Foundation. + + This program is distributed in the hope it will be useful, but WITHOUT + ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + more details. + + You should have received a copy of the GNU General Public License along with + this program; if not, write to the Free Software Foundation, Inc., + 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + + The full GNU General Public License is included in this distribution in + the file called "COPYING". + + Author: Giuseppe Cavallaro + + Documentation available at: + http://www.stlinux.com + Support available at: + https://bugzilla.stlinux.com/ +*******************************************************************************/ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "stmmac.h" + +#define STMMAC_RESOURCE_NAME "stmmaceth" +#define PHY_RESOURCE_NAME "stmmacphy" + +#undef STMMAC_DEBUG +/*#define STMMAC_DEBUG*/ +#ifdef STMMAC_DEBUG +#define DBG(nlevel, klevel, fmt, args...) \ + ((void)(netif_msg_##nlevel(priv) && \ + printk(KERN_##klevel fmt, ## args))) +#else +#define DBG(nlevel, klevel, fmt, args...) do { } while (0) +#endif + +#undef STMMAC_RX_DEBUG +/*#define STMMAC_RX_DEBUG*/ +#ifdef STMMAC_RX_DEBUG +#define RX_DBG(fmt, args...) printk(fmt, ## args) +#else +#define RX_DBG(fmt, args...) do { } while (0) +#endif + +#undef STMMAC_XMIT_DEBUG +/*#define STMMAC_XMIT_DEBUG*/ +#ifdef STMMAC_TX_DEBUG +#define TX_DBG(fmt, args...) printk(fmt, ## args) +#else +#define TX_DBG(fmt, args...) do { } while (0) +#endif + +#define STMMAC_ALIGN(x) L1_CACHE_ALIGN(x) +#define JUMBO_LEN 9000 + +/* Module parameters */ +#define TX_TIMEO 5000 /* default 5 seconds */ +static int watchdog = TX_TIMEO; +module_param(watchdog, int, S_IRUGO | S_IWUSR); +MODULE_PARM_DESC(watchdog, "Transmit timeout in milliseconds"); + +static int debug = -1; /* -1: default, 0: no output, 16: all */ +module_param(debug, int, S_IRUGO | S_IWUSR); +MODULE_PARM_DESC(debug, "Message Level (0: no output, 16: all)"); + +static int phyaddr = -1; +module_param(phyaddr, int, S_IRUGO); +MODULE_PARM_DESC(phyaddr, "Physical device address"); + +#define DMA_TX_SIZE 256 +static int dma_txsize = DMA_TX_SIZE; +module_param(dma_txsize, int, S_IRUGO | S_IWUSR); +MODULE_PARM_DESC(dma_txsize, "Number of descriptors in the TX list"); + +#define DMA_RX_SIZE 256 +static int dma_rxsize = DMA_RX_SIZE; +module_param(dma_rxsize, int, S_IRUGO | S_IWUSR); +MODULE_PARM_DESC(dma_rxsize, "Number of descriptors in the RX list"); + +static int flow_ctrl = FLOW_OFF; +module_param(flow_ctrl, int, S_IRUGO | S_IWUSR); +MODULE_PARM_DESC(flow_ctrl, "Flow control ability [on/off]"); + +static int pause = PAUSE_TIME; +module_param(pause, int, S_IRUGO | S_IWUSR); +MODULE_PARM_DESC(pause, "Flow Control Pause Time"); + +#define TC_DEFAULT 64 +static int tc = TC_DEFAULT; +module_param(tc, int, S_IRUGO | S_IWUSR); +MODULE_PARM_DESC(tc, "DMA threshold control value"); + +#define RX_NO_COALESCE 1 /* Always interrupt on completion */ +#define TX_NO_COALESCE -1 /* No moderation by default */ + +/* Pay attention to tune this parameter; take care of both + * hardware capability and network stabitily/performance impact. + * Many tests showed that ~4ms latency seems to be good enough. */ +#ifdef CONFIG_STMMAC_TIMER +#define DEFAULT_PERIODIC_RATE 256 +static int tmrate = DEFAULT_PERIODIC_RATE; +module_param(tmrate, int, S_IRUGO | S_IWUSR); +MODULE_PARM_DESC(tmrate, "External timer freq. (default: 256Hz)"); +#endif + +#define DMA_BUFFER_SIZE BUF_SIZE_2KiB +static int buf_sz = DMA_BUFFER_SIZE; +module_param(buf_sz, int, S_IRUGO | S_IWUSR); +MODULE_PARM_DESC(buf_sz, "DMA buffer size"); + +/* In case of Giga ETH, we can enable/disable the COE for the + * transmit HW checksum computation. + * Note that, if tx csum is off in HW, SG will be still supported. */ +static int tx_coe = HW_CSUM; +module_param(tx_coe, int, S_IRUGO | S_IWUSR); +MODULE_PARM_DESC(tx_coe, "GMAC COE type 2 [on/off]"); + +static const u32 default_msg_level = (NETIF_MSG_DRV | NETIF_MSG_PROBE | + NETIF_MSG_LINK | NETIF_MSG_IFUP | + NETIF_MSG_IFDOWN | NETIF_MSG_TIMER); + +static irqreturn_t stmmac_interrupt(int irq, void *dev_id); +static netdev_tx_t stmmac_xmit(struct sk_buff *skb, struct net_device *dev); + +/** + * stmmac_verify_args - verify the driver parameters. + * Description: it verifies if some wrong parameter is passed to the driver. + * Note that wrong parameters are replaced with the default values. + */ +static void stmmac_verify_args(void) +{ + if (unlikely(watchdog < 0)) + watchdog = TX_TIMEO; + if (unlikely(dma_rxsize < 0)) + dma_rxsize = DMA_RX_SIZE; + if (unlikely(dma_txsize < 0)) + dma_txsize = DMA_TX_SIZE; + if (unlikely((buf_sz < DMA_BUFFER_SIZE) || (buf_sz > BUF_SIZE_16KiB))) + buf_sz = DMA_BUFFER_SIZE; + if (unlikely(flow_ctrl > 1)) + flow_ctrl = FLOW_AUTO; + else if (likely(flow_ctrl < 0)) + flow_ctrl = FLOW_OFF; + if (unlikely((pause < 0) || (pause > 0xffff))) + pause = PAUSE_TIME; + + return; +} + +#if defined(STMMAC_XMIT_DEBUG) || defined(STMMAC_RX_DEBUG) +static void print_pkt(unsigned char *buf, int len) +{ + int j; + pr_info("len = %d byte, buf addr: 0x%p", len, buf); + for (j = 0; j < len; j++) { + if ((j % 16) == 0) + pr_info("\n %03x:", j); + pr_info(" %02x", buf[j]); + } + pr_info("\n"); + return; +} +#endif + +/* minimum number of free TX descriptors required to wake up TX process */ +#define STMMAC_TX_THRESH(x) (x->dma_tx_size/4) + +static inline u32 stmmac_tx_avail(struct stmmac_priv *priv) +{ + return priv->dirty_tx + priv->dma_tx_size - priv->cur_tx - 1; +} + +/** + * stmmac_adjust_link + * @dev: net device structure + * Description: it adjusts the link parameters. + */ +static void stmmac_adjust_link(struct net_device *dev) +{ + struct stmmac_priv *priv = netdev_priv(dev); + struct phy_device *phydev = priv->phydev; + unsigned long ioaddr = dev->base_addr; + unsigned long flags; + int new_state = 0; + unsigned int fc = priv->flow_ctrl, pause_time = priv->pause; + + if (phydev == NULL) + return; + + DBG(probe, DEBUG, "stmmac_adjust_link: called. address %d link %d\n", + phydev->addr, phydev->link); + + spin_lock_irqsave(&priv->lock, flags); + if (phydev->link) { + u32 ctrl = readl(ioaddr + MAC_CTRL_REG); + + /* Now we make sure that we can be in full duplex mode. + * If not, we operate in half-duplex mode. */ + if (phydev->duplex != priv->oldduplex) { + new_state = 1; + if (!(phydev->duplex)) + ctrl &= ~priv->mac_type->hw.link.duplex; + else + ctrl |= priv->mac_type->hw.link.duplex; + priv->oldduplex = phydev->duplex; + } + /* Flow Control operation */ + if (phydev->pause) + priv->mac_type->ops->flow_ctrl(ioaddr, phydev->duplex, + fc, pause_time); + + if (phydev->speed != priv->speed) { + new_state = 1; + switch (phydev->speed) { + case 1000: + if (likely(priv->is_gmac)) + ctrl &= ~priv->mac_type->hw.link.port; + break; + case 100: + case 10: + if (priv->is_gmac) { + ctrl |= priv->mac_type->hw.link.port; + if (phydev->speed == SPEED_100) { + ctrl |= + priv->mac_type->hw.link. + speed; + } else { + ctrl &= + ~(priv->mac_type->hw. + link.speed); + } + } else { + ctrl &= ~priv->mac_type->hw.link.port; + } + priv->fix_mac_speed(priv->bsp_priv, + phydev->speed); + break; + default: + if (netif_msg_link(priv)) + pr_warning("%s: Speed (%d) is not 10" + " or 100!\n", dev->name, phydev->speed); + break; + } + + priv->speed = phydev->speed; + } + + writel(ctrl, ioaddr + MAC_CTRL_REG); + + if (!priv->oldlink) { + new_state = 1; + priv->oldlink = 1; + } + } else if (priv->oldlink) { + new_state = 1; + priv->oldlink = 0; + priv->speed = 0; + priv->oldduplex = -1; + } + + if (new_state && netif_msg_link(priv)) + phy_print_status(phydev); + + spin_unlock_irqrestore(&priv->lock, flags); + + DBG(probe, DEBUG, "stmmac_adjust_link: exiting\n"); +} + +/** + * stmmac_init_phy - PHY initialization + * @dev: net device structure + * Description: it initializes the driver's PHY state, and attaches the PHY + * to the mac driver. + * Return value: + * 0 on success + */ +static int stmmac_init_phy(struct net_device *dev) +{ + struct stmmac_priv *priv = netdev_priv(dev); + struct phy_device *phydev; + char phy_id[BUS_ID_SIZE]; /* PHY to connect */ + char bus_id[BUS_ID_SIZE]; + + priv->oldlink = 0; + priv->speed = 0; + priv->oldduplex = -1; + + if (priv->phy_addr == -1) { + /* We don't have a PHY, so do nothing */ + return 0; + } + + snprintf(bus_id, MII_BUS_ID_SIZE, "%x", priv->bus_id); + snprintf(phy_id, BUS_ID_SIZE, PHY_ID_FMT, bus_id, priv->phy_addr); + pr_debug("stmmac_init_phy: trying to attach to %s\n", phy_id); + + phydev = phy_connect(dev, phy_id, &stmmac_adjust_link, 0, + priv->phy_interface); + + if (IS_ERR(phydev)) { + pr_err("%s: Could not attach to PHY\n", dev->name); + return PTR_ERR(phydev); + } + + /* + * Broken HW is sometimes missing the pull-up resistor on the + * MDIO line, which results in reads to non-existent devices returning + * 0 rather than 0xffff. Catch this here and treat 0 as a non-existent + * device as well. + * Note: phydev->phy_id is the result of reading the UID PHY registers. + */ + if (phydev->phy_id == 0) { + phy_disconnect(phydev); + return -ENODEV; + } + pr_debug("stmmac_init_phy: %s: attached to PHY (UID 0x%x)" + " Link = %d\n", dev->name, phydev->phy_id, phydev->link); + + priv->phydev = phydev; + + return 0; +} + +static inline void stmmac_mac_enable_rx(unsigned long ioaddr) +{ + u32 value = readl(ioaddr + MAC_CTRL_REG); + value |= MAC_RNABLE_RX; + /* Set the RE (receive enable bit into the MAC CTRL register). */ + writel(value, ioaddr + MAC_CTRL_REG); +} + +static inline void stmmac_mac_enable_tx(unsigned long ioaddr) +{ + u32 value = readl(ioaddr + MAC_CTRL_REG); + value |= MAC_ENABLE_TX; + /* Set the TE (transmit enable bit into the MAC CTRL register). */ + writel(value, ioaddr + MAC_CTRL_REG); +} + +static inline void stmmac_mac_disable_rx(unsigned long ioaddr) +{ + u32 value = readl(ioaddr + MAC_CTRL_REG); + value &= ~MAC_RNABLE_RX; + writel(value, ioaddr + MAC_CTRL_REG); +} + +static inline void stmmac_mac_disable_tx(unsigned long ioaddr) +{ + u32 value = readl(ioaddr + MAC_CTRL_REG); + value &= ~MAC_ENABLE_TX; + writel(value, ioaddr + MAC_CTRL_REG); +} + +/** + * display_ring + * @p: pointer to the ring. + * @size: size of the ring. + * Description: display all the descriptors within the ring. + */ +static void display_ring(struct dma_desc *p, int size) +{ + struct tmp_s { + u64 a; + unsigned int b; + unsigned int c; + }; + int i; + for (i = 0; i < size; i++) { + struct tmp_s *x = (struct tmp_s *)(p + i); + pr_info("\t%d [0x%x]: DES0=0x%x DES1=0x%x BUF1=0x%x BUF2=0x%x", + i, (unsigned int)virt_to_phys(&p[i]), + (unsigned int)(x->a), (unsigned int)((x->a) >> 32), + x->b, x->c); + pr_info("\n"); + } +} + +/** + * init_dma_desc_rings - init the RX/TX descriptor rings + * @dev: net device structure + * Description: this function initializes the DMA RX/TX descriptors + * and allocates the socket buffers. + */ +static void init_dma_desc_rings(struct net_device *dev) +{ + int i; + struct stmmac_priv *priv = netdev_priv(dev); + struct sk_buff *skb; + unsigned int txsize = priv->dma_tx_size; + unsigned int rxsize = priv->dma_rx_size; + unsigned int bfsize = priv->dma_buf_sz; + int buff2_needed = 0; + int dis_ic = 0; + +#ifdef CONFIG_STMMAC_TIMER + /* Using Timers disable interrupts on completion for the reception */ + dis_ic = 1; +#endif + /* Set the Buffer size according to the MTU; + * indeed, in case of jumbo we need to bump-up the buffer sizes. + */ + if (unlikely(dev->mtu >= BUF_SIZE_8KiB)) + bfsize = BUF_SIZE_16KiB; + else if (unlikely(dev->mtu >= BUF_SIZE_4KiB)) + bfsize = BUF_SIZE_8KiB; + else if (unlikely(dev->mtu >= BUF_SIZE_2KiB)) + bfsize = BUF_SIZE_4KiB; + else if (unlikely(dev->mtu >= DMA_BUFFER_SIZE)) + bfsize = BUF_SIZE_2KiB; + else + bfsize = DMA_BUFFER_SIZE; + + /* If the MTU exceeds 8k so use the second buffer in the chain */ + if (bfsize >= BUF_SIZE_8KiB) + buff2_needed = 1; + + DBG(probe, INFO, "stmmac: txsize %d, rxsize %d, bfsize %d\n", + txsize, rxsize, bfsize); + + priv->rx_skbuff_dma = kmalloc(rxsize * sizeof(dma_addr_t), GFP_KERNEL); + priv->rx_skbuff = + kmalloc(sizeof(struct sk_buff *) * rxsize, GFP_KERNEL); + priv->dma_rx = + (struct dma_desc *)dma_alloc_coherent(priv->device, + rxsize * + sizeof(struct dma_desc), + &priv->dma_rx_phy, + GFP_KERNEL); + priv->tx_skbuff = kmalloc(sizeof(struct sk_buff *) * txsize, + GFP_KERNEL); + priv->dma_tx = + (struct dma_desc *)dma_alloc_coherent(priv->device, + txsize * + sizeof(struct dma_desc), + &priv->dma_tx_phy, + GFP_KERNEL); + + if ((priv->dma_rx == NULL) || (priv->dma_tx == NULL)) { + pr_err("%s:ERROR allocating the DMA Tx/Rx desc\n", __func__); + return; + } + + DBG(probe, INFO, "stmmac (%s) DMA desc rings: virt addr (Rx %p, " + "Tx %p)\n\tDMA phy addr (Rx 0x%08x, Tx 0x%08x)\n", + dev->name, priv->dma_rx, priv->dma_tx, + (unsigned int)priv->dma_rx_phy, (unsigned int)priv->dma_tx_phy); + + /* RX INITIALIZATION */ + DBG(probe, INFO, "stmmac: SKB addresses:\n" + "skb\t\tskb data\tdma data\n"); + + for (i = 0; i < rxsize; i++) { + struct dma_desc *p = priv->dma_rx + i; + + skb = netdev_alloc_skb_ip_align(dev, bfsize); + if (unlikely(skb == NULL)) { + pr_err("%s: Rx init fails; skb is NULL\n", __func__); + break; + } + priv->rx_skbuff[i] = skb; + priv->rx_skbuff_dma[i] = dma_map_single(priv->device, skb->data, + bfsize, DMA_FROM_DEVICE); + + p->des2 = priv->rx_skbuff_dma[i]; + if (unlikely(buff2_needed)) + p->des3 = p->des2 + BUF_SIZE_8KiB; + DBG(probe, INFO, "[%p]\t[%p]\t[%x]\n", priv->rx_skbuff[i], + priv->rx_skbuff[i]->data, priv->rx_skbuff_dma[i]); + } + priv->cur_rx = 0; + priv->dirty_rx = (unsigned int)(i - rxsize); + priv->dma_buf_sz = bfsize; + buf_sz = bfsize; + + /* TX INITIALIZATION */ + for (i = 0; i < txsize; i++) { + priv->tx_skbuff[i] = NULL; + priv->dma_tx[i].des2 = 0; + } + priv->dirty_tx = 0; + priv->cur_tx = 0; + + /* Clear the Rx/Tx descriptors */ + priv->mac_type->ops->init_rx_desc(priv->dma_rx, rxsize, dis_ic); + priv->mac_type->ops->init_tx_desc(priv->dma_tx, txsize); + + if (netif_msg_hw(priv)) { + pr_info("RX descriptor ring:\n"); + display_ring(priv->dma_rx, rxsize); + pr_info("TX descriptor ring:\n"); + display_ring(priv->dma_tx, txsize); + } + return; +} + +static void dma_free_rx_skbufs(struct stmmac_priv *priv) +{ + int i; + + for (i = 0; i < priv->dma_rx_size; i++) { + if (priv->rx_skbuff[i]) { + dma_unmap_single(priv->device, priv->rx_skbuff_dma[i], + priv->dma_buf_sz, DMA_FROM_DEVICE); + dev_kfree_skb_any(priv->rx_skbuff[i]); + } + priv->rx_skbuff[i] = NULL; + } + return; +} + +static void dma_free_tx_skbufs(struct stmmac_priv *priv) +{ + int i; + + for (i = 0; i < priv->dma_tx_size; i++) { + if (priv->tx_skbuff[i] != NULL) { + struct dma_desc *p = priv->dma_tx + i; + if (p->des2) + dma_unmap_single(priv->device, p->des2, + priv->mac_type->ops->get_tx_len(p), + DMA_TO_DEVICE); + dev_kfree_skb_any(priv->tx_skbuff[i]); + priv->tx_skbuff[i] = NULL; + } + } + return; +} + +static void free_dma_desc_resources(struct stmmac_priv *priv) +{ + /* Release the DMA TX/RX socket buffers */ + dma_free_rx_skbufs(priv); + dma_free_tx_skbufs(priv); + + /* Free the region of consistent memory previously allocated for + * the DMA */ + dma_free_coherent(priv->device, + priv->dma_tx_size * sizeof(struct dma_desc), + priv->dma_tx, priv->dma_tx_phy); + dma_free_coherent(priv->device, + priv->dma_rx_size * sizeof(struct dma_desc), + priv->dma_rx, priv->dma_rx_phy); + kfree(priv->rx_skbuff_dma); + kfree(priv->rx_skbuff); + kfree(priv->tx_skbuff); + + return; +} + +/** + * stmmac_dma_start_tx + * @ioaddr: device I/O address + * Description: this function starts the DMA tx process. + */ +static void stmmac_dma_start_tx(unsigned long ioaddr) +{ + u32 value = readl(ioaddr + DMA_CONTROL); + value |= DMA_CONTROL_ST; + writel(value, ioaddr + DMA_CONTROL); + return; +} + +static void stmmac_dma_stop_tx(unsigned long ioaddr) +{ + u32 value = readl(ioaddr + DMA_CONTROL); + value &= ~DMA_CONTROL_ST; + writel(value, ioaddr + DMA_CONTROL); + return; +} + +/** + * stmmac_dma_start_rx + * @ioaddr: device I/O address + * Description: this function starts the DMA rx process. + */ +static void stmmac_dma_start_rx(unsigned long ioaddr) +{ + u32 value = readl(ioaddr + DMA_CONTROL); + value |= DMA_CONTROL_SR; + writel(value, ioaddr + DMA_CONTROL); + + return; +} + +static void stmmac_dma_stop_rx(unsigned long ioaddr) +{ + u32 value = readl(ioaddr + DMA_CONTROL); + value &= ~DMA_CONTROL_SR; + writel(value, ioaddr + DMA_CONTROL); + + return; +} + +/** + * stmmac_dma_operation_mode - HW DMA operation mode + * @priv : pointer to the private device structure. + * Description: it sets the DMA operation mode: tx/rx DMA thresholds + * or Store-And-Forward capability. It also verifies the COE for the + * transmission in case of Giga ETH. + */ +static void stmmac_dma_operation_mode(struct stmmac_priv *priv) +{ + if (!priv->is_gmac) { + /* MAC 10/100 */ + priv->mac_type->ops->dma_mode(priv->dev->base_addr, tc, 0); + priv->tx_coe = NO_HW_CSUM; + } else { + if ((priv->dev->mtu <= ETH_DATA_LEN) && (tx_coe)) { + priv->mac_type->ops->dma_mode(priv->dev->base_addr, + SF_DMA_MODE, SF_DMA_MODE); + tc = SF_DMA_MODE; + priv->tx_coe = HW_CSUM; + } else { + /* Checksum computation is performed in software. */ + priv->mac_type->ops->dma_mode(priv->dev->base_addr, tc, + SF_DMA_MODE); + priv->tx_coe = NO_HW_CSUM; + } + } + tx_coe = priv->tx_coe; + + return; +} + +#ifdef STMMAC_DEBUG +/** + * show_tx_process_state + * @status: tx descriptor status field + * Description: it shows the Transmit Process State for CSR5[22:20] + */ +static void show_tx_process_state(unsigned int status) +{ + unsigned int state; + state = (status & DMA_STATUS_TS_MASK) >> DMA_STATUS_TS_SHIFT; + + switch (state) { + case 0: + pr_info("- TX (Stopped): Reset or Stop command\n"); + break; + case 1: + pr_info("- TX (Running):Fetching the Tx desc\n"); + break; + case 2: + pr_info("- TX (Running): Waiting for end of tx\n"); + break; + case 3: + pr_info("- TX (Running): Reading the data " + "and queuing the data into the Tx buf\n"); + break; + case 6: + pr_info("- TX (Suspended): Tx Buff Underflow " + "or an unavailable Transmit descriptor\n"); + break; + case 7: + pr_info("- TX (Running): Closing Tx descriptor\n"); + break; + default: + break; + } + return; +} + +/** + * show_rx_process_state + * @status: rx descriptor status field + * Description: it shows the Receive Process State for CSR5[19:17] + */ +static void show_rx_process_state(unsigned int status) +{ + unsigned int state; + state = (status & DMA_STATUS_RS_MASK) >> DMA_STATUS_RS_SHIFT; + + switch (state) { + case 0: + pr_info("- RX (Stopped): Reset or Stop command\n"); + break; + case 1: + pr_info("- RX (Running): Fetching the Rx desc\n"); + break; + case 2: + pr_info("- RX (Running):Checking for end of pkt\n"); + break; + case 3: + pr_info("- RX (Running): Waiting for Rx pkt\n"); + break; + case 4: + pr_info("- RX (Suspended): Unavailable Rx buf\n"); + break; + case 5: + pr_info("- RX (Running): Closing Rx descriptor\n"); + break; + case 6: + pr_info("- RX(Running): Flushing the current frame" + " from the Rx buf\n"); + break; + case 7: + pr_info("- RX (Running): Queuing the Rx frame" + " from the Rx buf into memory\n"); + break; + default: + break; + } + return; +} +#endif + +/** + * stmmac_tx: + * @priv: private driver structure + * Description: it reclaims resources after transmission completes. + */ +static void stmmac_tx(struct stmmac_priv *priv) +{ + unsigned int txsize = priv->dma_tx_size; + unsigned long ioaddr = priv->dev->base_addr; + + while (priv->dirty_tx != priv->cur_tx) { + int last; + unsigned int entry = priv->dirty_tx % txsize; + struct sk_buff *skb = priv->tx_skbuff[entry]; + struct dma_desc *p = priv->dma_tx + entry; + + /* Check if the descriptor is owned by the DMA. */ + if (priv->mac_type->ops->get_tx_owner(p)) + break; + + /* Verify tx error by looking at the last segment */ + last = priv->mac_type->ops->get_tx_ls(p); + if (likely(last)) { + int tx_error = + priv->mac_type->ops->tx_status(&priv->dev->stats, + &priv->xstats, + p, ioaddr); + if (likely(tx_error == 0)) { + priv->dev->stats.tx_packets++; + priv->xstats.tx_pkt_n++; + } else + priv->dev->stats.tx_errors++; + } + TX_DBG("%s: curr %d, dirty %d\n", __func__, + priv->cur_tx, priv->dirty_tx); + + if (likely(p->des2)) + dma_unmap_single(priv->device, p->des2, + priv->mac_type->ops->get_tx_len(p), + DMA_TO_DEVICE); + if (unlikely(p->des3)) + p->des3 = 0; + + if (likely(skb != NULL)) { + /* + * If there's room in the queue (limit it to size) + * we add this skb back into the pool, + * if it's the right size. + */ + if ((skb_queue_len(&priv->rx_recycle) < + priv->dma_rx_size) && + skb_recycle_check(skb, priv->dma_buf_sz)) + __skb_queue_head(&priv->rx_recycle, skb); + else + dev_kfree_skb(skb); + + priv->tx_skbuff[entry] = NULL; + } + + priv->mac_type->ops->release_tx_desc(p); + + entry = (++priv->dirty_tx) % txsize; + } + if (unlikely(netif_queue_stopped(priv->dev) && + stmmac_tx_avail(priv) > STMMAC_TX_THRESH(priv))) { + netif_tx_lock(priv->dev); + if (netif_queue_stopped(priv->dev) && + stmmac_tx_avail(priv) > STMMAC_TX_THRESH(priv)) { + TX_DBG("%s: restart transmit\n", __func__); + netif_wake_queue(priv->dev); + } + netif_tx_unlock(priv->dev); + } + return; +} + +static inline void stmmac_enable_irq(struct stmmac_priv *priv) +{ +#ifndef CONFIG_STMMAC_TIMER + writel(DMA_INTR_DEFAULT_MASK, priv->dev->base_addr + DMA_INTR_ENA); +#else + priv->tm->timer_start(tmrate); +#endif +} + +static inline void stmmac_disable_irq(struct stmmac_priv *priv) +{ +#ifndef CONFIG_STMMAC_TIMER + writel(0, priv->dev->base_addr + DMA_INTR_ENA); +#else + priv->tm->timer_stop(); +#endif +} + +static int stmmac_has_work(struct stmmac_priv *priv) +{ + unsigned int has_work = 0; + int rxret, tx_work = 0; + + rxret = priv->mac_type->ops->get_rx_owner(priv->dma_rx + + (priv->cur_rx % priv->dma_rx_size)); + + if (priv->dirty_tx != priv->cur_tx) + tx_work = 1; + + if (likely(!rxret || tx_work)) + has_work = 1; + + return has_work; +} + +static inline void _stmmac_schedule(struct stmmac_priv *priv) +{ + if (likely(stmmac_has_work(priv))) { + stmmac_disable_irq(priv); + napi_schedule(&priv->napi); + } +} + +#ifdef CONFIG_STMMAC_TIMER +void stmmac_schedule(struct net_device *dev) +{ + struct stmmac_priv *priv = netdev_priv(dev); + + priv->xstats.sched_timer_n++; + + _stmmac_schedule(priv); + + return; +} + +static void stmmac_no_timer_started(unsigned int x) +{; +}; + +static void stmmac_no_timer_stopped(void) +{; +}; +#endif + +/** + * stmmac_tx_err: + * @priv: pointer to the private device structure + * Description: it cleans the descriptors and restarts the transmission + * in case of errors. + */ +static void stmmac_tx_err(struct stmmac_priv *priv) +{ + netif_stop_queue(priv->dev); + + stmmac_dma_stop_tx(priv->dev->base_addr); + dma_free_tx_skbufs(priv); + priv->mac_type->ops->init_tx_desc(priv->dma_tx, priv->dma_tx_size); + priv->dirty_tx = 0; + priv->cur_tx = 0; + stmmac_dma_start_tx(priv->dev->base_addr); + + priv->dev->stats.tx_errors++; + netif_wake_queue(priv->dev); + + return; +} + +/** + * stmmac_dma_interrupt - Interrupt handler for the driver + * @dev: net device structure + * Description: Interrupt handler for the driver (DMA). + */ +static void stmmac_dma_interrupt(struct net_device *dev) +{ + unsigned long ioaddr = dev->base_addr; + struct stmmac_priv *priv = netdev_priv(dev); + /* read the status register (CSR5) */ + u32 intr_status = readl(ioaddr + DMA_STATUS); + + DBG(intr, INFO, "%s: [CSR5: 0x%08x]\n", __func__, intr_status); + +#ifdef STMMAC_DEBUG + /* It displays the DMA transmit process state (CSR5 register) */ + if (netif_msg_tx_done(priv)) + show_tx_process_state(intr_status); + if (netif_msg_rx_status(priv)) + show_rx_process_state(intr_status); +#endif + /* ABNORMAL interrupts */ + if (unlikely(intr_status & DMA_STATUS_AIS)) { + DBG(intr, INFO, "CSR5[15] DMA ABNORMAL IRQ: "); + if (unlikely(intr_status & DMA_STATUS_UNF)) { + DBG(intr, INFO, "transmit underflow\n"); + if (unlikely(tc != SF_DMA_MODE) + && (tc <= 256)) { + /* Try to bump up the threshold */ + tc += 64; + priv->mac_type->ops->dma_mode(ioaddr, tc, + SF_DMA_MODE); + priv->xstats.threshold = tc; + } + stmmac_tx_err(priv); + priv->xstats.tx_undeflow_irq++; + } + if (unlikely(intr_status & DMA_STATUS_TJT)) { + DBG(intr, INFO, "transmit jabber\n"); + priv->xstats.tx_jabber_irq++; + } + if (unlikely(intr_status & DMA_STATUS_OVF)) { + DBG(intr, INFO, "recv overflow\n"); + priv->xstats.rx_overflow_irq++; + } + if (unlikely(intr_status & DMA_STATUS_RU)) { + DBG(intr, INFO, "receive buffer unavailable\n"); + priv->xstats.rx_buf_unav_irq++; + } + if (unlikely(intr_status & DMA_STATUS_RPS)) { + DBG(intr, INFO, "receive process stopped\n"); + priv->xstats.rx_process_stopped_irq++; + } + if (unlikely(intr_status & DMA_STATUS_RWT)) { + DBG(intr, INFO, "receive watchdog\n"); + priv->xstats.rx_watchdog_irq++; + } + if (unlikely(intr_status & DMA_STATUS_ETI)) { + DBG(intr, INFO, "transmit early interrupt\n"); + priv->xstats.tx_early_irq++; + } + if (unlikely(intr_status & DMA_STATUS_TPS)) { + DBG(intr, INFO, "transmit process stopped\n"); + priv->xstats.tx_process_stopped_irq++; + stmmac_tx_err(priv); + } + if (unlikely(intr_status & DMA_STATUS_FBI)) { + DBG(intr, INFO, "fatal bus error\n"); + priv->xstats.fatal_bus_error_irq++; + stmmac_tx_err(priv); + } + } + + /* TX/RX NORMAL interrupts */ + if (intr_status & DMA_STATUS_NIS) { + priv->xstats.normal_irq_n++; + if (likely((intr_status & DMA_STATUS_RI) || + (intr_status & (DMA_STATUS_TI)))) + _stmmac_schedule(priv); + } + + /* Optional hardware blocks, interrupts should be disabled */ + if (unlikely(intr_status & + (DMA_STATUS_GPI | DMA_STATUS_GMI | DMA_STATUS_GLI))) + pr_info("%s: unexpected status %08x\n", __func__, intr_status); + + /* Clear the interrupt by writing a logic 1 to the CSR5[15-0] */ + writel((intr_status & 0x1ffff), ioaddr + DMA_STATUS); + + DBG(intr, INFO, "\n\n"); + + return; +} + +/** + * stmmac_open - open entry point of the driver + * @dev : pointer to the device structure. + * Description: + * This function is the open entry point of the driver. + * Return value: + * 0 on success and an appropriate (-)ve integer as defined in errno.h + * file on failure. + */ +static int stmmac_open(struct net_device *dev) +{ + struct stmmac_priv *priv = netdev_priv(dev); + unsigned long ioaddr = dev->base_addr; + int ret; + + /* Check that the MAC address is valid. If its not, refuse + * to bring the device up. The user must specify an + * address using the following linux command: + * ifconfig eth0 hw ether xx:xx:xx:xx:xx:xx */ + if (!is_valid_ether_addr(dev->dev_addr)) { + random_ether_addr(dev->dev_addr); + pr_warning("%s: generated random MAC address %pM\n", dev->name, + dev->dev_addr); + } + + stmmac_verify_args(); + + ret = stmmac_init_phy(dev); + if (unlikely(ret)) { + pr_err("%s: Cannot attach to PHY (error: %d)\n", __func__, ret); + return ret; + } + + /* Request the IRQ lines */ + ret = request_irq(dev->irq, &stmmac_interrupt, + IRQF_SHARED, dev->name, dev); + if (unlikely(ret < 0)) { + pr_err("%s: ERROR: allocating the IRQ %d (error: %d)\n", + __func__, dev->irq, ret); + return ret; + } + +#ifdef CONFIG_STMMAC_TIMER + priv->tm = kmalloc(sizeof(struct stmmac_timer *), GFP_KERNEL); + if (unlikely(priv->tm == NULL)) { + pr_err("%s: ERROR: timer memory alloc failed \n", __func__); + return -ENOMEM; + } + priv->tm->freq = tmrate; + + /* Test if the HW timer can be actually used. + * In case of failure continue with no timer. */ + if (unlikely((stmmac_open_ext_timer(dev, priv->tm)) < 0)) { + pr_warning("stmmaceth: cannot attach the HW timer\n"); + tmrate = 0; + priv->tm->freq = 0; + priv->tm->timer_start = stmmac_no_timer_started; + priv->tm->timer_stop = stmmac_no_timer_stopped; + } +#endif + + /* Create and initialize the TX/RX descriptors chains. */ + priv->dma_tx_size = STMMAC_ALIGN(dma_txsize); + priv->dma_rx_size = STMMAC_ALIGN(dma_rxsize); + priv->dma_buf_sz = STMMAC_ALIGN(buf_sz); + init_dma_desc_rings(dev); + + /* DMA initialization and SW reset */ + if (unlikely(priv->mac_type->ops->dma_init(ioaddr, + priv->pbl, priv->dma_tx_phy, priv->dma_rx_phy) < 0)) { + + pr_err("%s: DMA initialization failed\n", __func__); + return -1; + } + + /* Copy the MAC addr into the HW */ + priv->mac_type->ops->set_umac_addr(ioaddr, dev->dev_addr, 0); + /* Initialize the MAC Core */ + priv->mac_type->ops->core_init(ioaddr); + + priv->shutdown = 0; + + /* Initialise the MMC (if present) to disable all interrupts. */ + writel(0xffffffff, ioaddr + MMC_HIGH_INTR_MASK); + writel(0xffffffff, ioaddr + MMC_LOW_INTR_MASK); + + /* Enable the MAC Rx/Tx */ + stmmac_mac_enable_rx(ioaddr); + stmmac_mac_enable_tx(ioaddr); + + /* Set the HW DMA mode and the COE */ + stmmac_dma_operation_mode(priv); + + /* Extra statistics */ + memset(&priv->xstats, 0, sizeof(struct stmmac_extra_stats)); + priv->xstats.threshold = tc; + + /* Start the ball rolling... */ + DBG(probe, DEBUG, "%s: DMA RX/TX processes started...\n", dev->name); + stmmac_dma_start_tx(ioaddr); + stmmac_dma_start_rx(ioaddr); + +#ifdef CONFIG_STMMAC_TIMER + priv->tm->timer_start(tmrate); +#endif + /* Dump DMA/MAC registers */ + if (netif_msg_hw(priv)) { + priv->mac_type->ops->dump_mac_regs(ioaddr); + priv->mac_type->ops->dump_dma_regs(ioaddr); + } + + if (priv->phydev) + phy_start(priv->phydev); + + napi_enable(&priv->napi); + skb_queue_head_init(&priv->rx_recycle); + netif_start_queue(dev); + return 0; +} + +/** + * stmmac_release - close entry point of the driver + * @dev : device pointer. + * Description: + * This is the stop entry point of the driver. + */ +static int stmmac_release(struct net_device *dev) +{ + struct stmmac_priv *priv = netdev_priv(dev); + + /* Stop and disconnect the PHY */ + if (priv->phydev) { + phy_stop(priv->phydev); + phy_disconnect(priv->phydev); + priv->phydev = NULL; + } + + netif_stop_queue(dev); + +#ifdef CONFIG_STMMAC_TIMER + /* Stop and release the timer */ + stmmac_close_ext_timer(); + if (priv->tm != NULL) + kfree(priv->tm); +#endif + napi_disable(&priv->napi); + skb_queue_purge(&priv->rx_recycle); + + /* Free the IRQ lines */ + free_irq(dev->irq, dev); + + /* Stop TX/RX DMA and clear the descriptors */ + stmmac_dma_stop_tx(dev->base_addr); + stmmac_dma_stop_rx(dev->base_addr); + + /* Release and free the Rx/Tx resources */ + free_dma_desc_resources(priv); + + /* Disable the MAC core */ + stmmac_mac_disable_tx(dev->base_addr); + stmmac_mac_disable_rx(dev->base_addr); + + netif_carrier_off(dev); + + return 0; +} + +/* + * To perform emulated hardware segmentation on skb. + */ +static int stmmac_sw_tso(struct stmmac_priv *priv, struct sk_buff *skb) +{ + struct sk_buff *segs, *curr_skb; + int gso_segs = skb_shinfo(skb)->gso_segs; + + /* Estimate the number of fragments in the worst case */ + if (unlikely(stmmac_tx_avail(priv) < gso_segs)) { + netif_stop_queue(priv->dev); + TX_DBG(KERN_ERR "%s: TSO BUG! Tx Ring full when queue awake\n", + __func__); + if (stmmac_tx_avail(priv) < gso_segs) + return NETDEV_TX_BUSY; + + netif_wake_queue(priv->dev); + } + TX_DBG("\tstmmac_sw_tso: segmenting: skb %p (len %d)\n", + skb, skb->len); + + segs = skb_gso_segment(skb, priv->dev->features & ~NETIF_F_TSO); + if (unlikely(IS_ERR(segs))) + goto sw_tso_end; + + do { + curr_skb = segs; + segs = segs->next; + TX_DBG("\t\tcurrent skb->len: %d, *curr %p," + "*next %p\n", curr_skb->len, curr_skb, segs); + curr_skb->next = NULL; + stmmac_xmit(curr_skb, priv->dev); + } while (segs); + +sw_tso_end: + dev_kfree_skb(skb); + + return NETDEV_TX_OK; +} + +static unsigned int stmmac_handle_jumbo_frames(struct sk_buff *skb, + struct net_device *dev, + int csum_insertion) +{ + struct stmmac_priv *priv = netdev_priv(dev); + unsigned int nopaged_len = skb_headlen(skb); + unsigned int txsize = priv->dma_tx_size; + unsigned int entry = priv->cur_tx % txsize; + struct dma_desc *desc = priv->dma_tx + entry; + + if (nopaged_len > BUF_SIZE_8KiB) { + + int buf2_size = nopaged_len - BUF_SIZE_8KiB; + + desc->des2 = dma_map_single(priv->device, skb->data, + BUF_SIZE_8KiB, DMA_TO_DEVICE); + desc->des3 = desc->des2 + BUF_SIZE_4KiB; + priv->mac_type->ops->prepare_tx_desc(desc, 1, BUF_SIZE_8KiB, + csum_insertion); + + entry = (++priv->cur_tx) % txsize; + desc = priv->dma_tx + entry; + + desc->des2 = dma_map_single(priv->device, + skb->data + BUF_SIZE_8KiB, + buf2_size, DMA_TO_DEVICE); + desc->des3 = desc->des2 + BUF_SIZE_4KiB; + priv->mac_type->ops->prepare_tx_desc(desc, 0, + buf2_size, csum_insertion); + priv->mac_type->ops->set_tx_owner(desc); + priv->tx_skbuff[entry] = NULL; + } else { + desc->des2 = dma_map_single(priv->device, skb->data, + nopaged_len, DMA_TO_DEVICE); + desc->des3 = desc->des2 + BUF_SIZE_4KiB; + priv->mac_type->ops->prepare_tx_desc(desc, 1, nopaged_len, + csum_insertion); + } + return entry; +} + +/** + * stmmac_xmit: + * @skb : the socket buffer + * @dev : device pointer + * Description : Tx entry point of the driver. + */ +static netdev_tx_t stmmac_xmit(struct sk_buff *skb, struct net_device *dev) +{ + struct stmmac_priv *priv = netdev_priv(dev); + unsigned int txsize = priv->dma_tx_size; + unsigned int entry; + int i, csum_insertion = 0; + int nfrags = skb_shinfo(skb)->nr_frags; + struct dma_desc *desc, *first; + + if (unlikely(stmmac_tx_avail(priv) < nfrags + 1)) { + if (!netif_queue_stopped(dev)) { + netif_stop_queue(dev); + /* This is a hard error, log it. */ + pr_err("%s: BUG! Tx Ring full when queue awake\n", + __func__); + } + return NETDEV_TX_BUSY; + } + + entry = priv->cur_tx % txsize; + +#ifdef STMMAC_XMIT_DEBUG + if ((skb->len > ETH_FRAME_LEN) || nfrags) + pr_info("stmmac xmit:\n" + "\tskb addr %p - len: %d - nopaged_len: %d\n" + "\tn_frags: %d - ip_summed: %d - %s gso\n", + skb, skb->len, skb_headlen(skb), nfrags, skb->ip_summed, + !skb_is_gso(skb) ? "isn't" : "is"); +#endif + + if (unlikely(skb_is_gso(skb))) + return stmmac_sw_tso(priv, skb); + + if (likely((skb->ip_summed == CHECKSUM_PARTIAL))) { + if (likely(priv->tx_coe == NO_HW_CSUM)) + skb_checksum_help(skb); + else + csum_insertion = 1; + } + + desc = priv->dma_tx + entry; + first = desc; + +#ifdef STMMAC_XMIT_DEBUG + if ((nfrags > 0) || (skb->len > ETH_FRAME_LEN)) + pr_debug("stmmac xmit: skb len: %d, nopaged_len: %d,\n" + "\t\tn_frags: %d, ip_summed: %d\n", + skb->len, skb_headlen(skb), nfrags, skb->ip_summed); +#endif + priv->tx_skbuff[entry] = skb; + if (unlikely(skb->len >= BUF_SIZE_4KiB)) { + entry = stmmac_handle_jumbo_frames(skb, dev, csum_insertion); + desc = priv->dma_tx + entry; + } else { + unsigned int nopaged_len = skb_headlen(skb); + desc->des2 = dma_map_single(priv->device, skb->data, + nopaged_len, DMA_TO_DEVICE); + priv->mac_type->ops->prepare_tx_desc(desc, 1, nopaged_len, + csum_insertion); + } + + for (i = 0; i < nfrags; i++) { + skb_frag_t *frag = &skb_shinfo(skb)->frags[i]; + int len = frag->size; + + entry = (++priv->cur_tx) % txsize; + desc = priv->dma_tx + entry; + + TX_DBG("\t[entry %d] segment len: %d\n", entry, len); + desc->des2 = dma_map_page(priv->device, frag->page, + frag->page_offset, + len, DMA_TO_DEVICE); + priv->tx_skbuff[entry] = NULL; + priv->mac_type->ops->prepare_tx_desc(desc, 0, len, + csum_insertion); + priv->mac_type->ops->set_tx_owner(desc); + } + + /* Interrupt on completition only for the latest segment */ + priv->mac_type->ops->close_tx_desc(desc); +#ifdef CONFIG_STMMAC_TIMER + /* Clean IC while using timers */ + priv->mac_type->ops->clear_tx_ic(desc); +#endif + /* To avoid raise condition */ + priv->mac_type->ops->set_tx_owner(first); + + priv->cur_tx++; + +#ifdef STMMAC_XMIT_DEBUG + if (netif_msg_pktdata(priv)) { + pr_info("stmmac xmit: current=%d, dirty=%d, entry=%d, " + "first=%p, nfrags=%d\n", + (priv->cur_tx % txsize), (priv->dirty_tx % txsize), + entry, first, nfrags); + display_ring(priv->dma_tx, txsize); + pr_info(">>> frame to be transmitted: "); + print_pkt(skb->data, skb->len); + } +#endif + if (unlikely(stmmac_tx_avail(priv) <= (MAX_SKB_FRAGS + 1))) { + TX_DBG("%s: stop transmitted packets\n", __func__); + netif_stop_queue(dev); + } + + dev->stats.tx_bytes += skb->len; + + /* CSR1 enables the transmit DMA to check for new descriptor */ + writel(1, dev->base_addr + DMA_XMT_POLL_DEMAND); + + return NETDEV_TX_OK; +} + +static inline void stmmac_rx_refill(struct stmmac_priv *priv) +{ + unsigned int rxsize = priv->dma_rx_size; + int bfsize = priv->dma_buf_sz; + struct dma_desc *p = priv->dma_rx; + + for (; priv->cur_rx - priv->dirty_rx > 0; priv->dirty_rx++) { + unsigned int entry = priv->dirty_rx % rxsize; + if (likely(priv->rx_skbuff[entry] == NULL)) { + struct sk_buff *skb; + + skb = __skb_dequeue(&priv->rx_recycle); + if (skb == NULL) + skb = netdev_alloc_skb_ip_align(priv->dev, + bfsize); + + if (unlikely(skb == NULL)) + break; + + priv->rx_skbuff[entry] = skb; + priv->rx_skbuff_dma[entry] = + dma_map_single(priv->device, skb->data, bfsize, + DMA_FROM_DEVICE); + + (p + entry)->des2 = priv->rx_skbuff_dma[entry]; + if (unlikely(priv->is_gmac)) { + if (bfsize >= BUF_SIZE_8KiB) + (p + entry)->des3 = + (p + entry)->des2 + BUF_SIZE_8KiB; + } + RX_DBG(KERN_INFO "\trefill entry #%d\n", entry); + } + priv->mac_type->ops->set_rx_owner(p + entry); + } + return; +} + +static int stmmac_rx(struct stmmac_priv *priv, int limit) +{ + unsigned int rxsize = priv->dma_rx_size; + unsigned int entry = priv->cur_rx % rxsize; + unsigned int next_entry; + unsigned int count = 0; + struct dma_desc *p = priv->dma_rx + entry; + struct dma_desc *p_next; + +#ifdef STMMAC_RX_DEBUG + if (netif_msg_hw(priv)) { + pr_debug(">>> stmmac_rx: descriptor ring:\n"); + display_ring(priv->dma_rx, rxsize); + } +#endif + count = 0; + while (!priv->mac_type->ops->get_rx_owner(p)) { + int status; + + if (count >= limit) + break; + + count++; + + next_entry = (++priv->cur_rx) % rxsize; + p_next = priv->dma_rx + next_entry; + prefetch(p_next); + + /* read the status of the incoming frame */ + status = (priv->mac_type->ops->rx_status(&priv->dev->stats, + &priv->xstats, p)); + if (unlikely(status == discard_frame)) + priv->dev->stats.rx_errors++; + else { + struct sk_buff *skb; + /* Length should omit the CRC */ + int frame_len = + priv->mac_type->ops->get_rx_frame_len(p) - 4; + +#ifdef STMMAC_RX_DEBUG + if (frame_len > ETH_FRAME_LEN) + pr_debug("\tRX frame size %d, COE status: %d\n", + frame_len, status); + + if (netif_msg_hw(priv)) + pr_debug("\tdesc: %p [entry %d] buff=0x%x\n", + p, entry, p->des2); +#endif + skb = priv->rx_skbuff[entry]; + if (unlikely(!skb)) { + pr_err("%s: Inconsistent Rx descriptor chain\n", + priv->dev->name); + priv->dev->stats.rx_dropped++; + break; + } + prefetch(skb->data - NET_IP_ALIGN); + priv->rx_skbuff[entry] = NULL; + + skb_put(skb, frame_len); + dma_unmap_single(priv->device, + priv->rx_skbuff_dma[entry], + priv->dma_buf_sz, DMA_FROM_DEVICE); +#ifdef STMMAC_RX_DEBUG + if (netif_msg_pktdata(priv)) { + pr_info(" frame received (%dbytes)", frame_len); + print_pkt(skb->data, frame_len); + } +#endif + skb->protocol = eth_type_trans(skb, priv->dev); + + if (unlikely(status == csum_none)) { + /* always for the old mac 10/100 */ + skb->ip_summed = CHECKSUM_NONE; + netif_receive_skb(skb); + } else { + skb->ip_summed = CHECKSUM_UNNECESSARY; + napi_gro_receive(&priv->napi, skb); + } + + priv->dev->stats.rx_packets++; + priv->dev->stats.rx_bytes += frame_len; + priv->dev->last_rx = jiffies; + } + entry = next_entry; + p = p_next; /* use prefetched values */ + } + + stmmac_rx_refill(priv); + + priv->xstats.rx_pkt_n += count; + + return count; +} + +/** + * stmmac_poll - stmmac poll method (NAPI) + * @napi : pointer to the napi structure. + * @budget : maximum number of packets that the current CPU can receive from + * all interfaces. + * Description : + * This function implements the the reception process. + * Also it runs the TX completion thread + */ +static int stmmac_poll(struct napi_struct *napi, int budget) +{ + struct stmmac_priv *priv = container_of(napi, struct stmmac_priv, napi); + int work_done = 0; + + priv->xstats.poll_n++; + stmmac_tx(priv); + work_done = stmmac_rx(priv, budget); + + if (work_done < budget) { + napi_complete(napi); + stmmac_enable_irq(priv); + } + return work_done; +} + +/** + * stmmac_tx_timeout + * @dev : Pointer to net device structure + * Description: this function is called when a packet transmission fails to + * complete within a reasonable tmrate. The driver will mark the error in the + * netdev structure and arrange for the device to be reset to a sane state + * in order to transmit a new packet. + */ +static void stmmac_tx_timeout(struct net_device *dev) +{ + struct stmmac_priv *priv = netdev_priv(dev); + + /* Clear Tx resources and restart transmitting again */ + stmmac_tx_err(priv); + return; +} + +/* Configuration changes (passed on by ifconfig) */ +static int stmmac_config(struct net_device *dev, struct ifmap *map) +{ + if (dev->flags & IFF_UP) /* can't act on a running interface */ + return -EBUSY; + + /* Don't allow changing the I/O address */ + if (map->base_addr != dev->base_addr) { + pr_warning("%s: can't change I/O address\n", dev->name); + return -EOPNOTSUPP; + } + + /* Don't allow changing the IRQ */ + if (map->irq != dev->irq) { + pr_warning("%s: can't change IRQ number %d\n", + dev->name, dev->irq); + return -EOPNOTSUPP; + } + + /* ignore other fields */ + return 0; +} + +/** + * stmmac_multicast_list - entry point for multicast addressing + * @dev : pointer to the device structure + * Description: + * This function is a driver entry point which gets called by the kernel + * whenever multicast addresses must be enabled/disabled. + * Return value: + * void. + */ +static void stmmac_multicast_list(struct net_device *dev) +{ + struct stmmac_priv *priv = netdev_priv(dev); + + spin_lock(&priv->lock); + priv->mac_type->ops->set_filter(dev); + spin_unlock(&priv->lock); + return; +} + +/** + * stmmac_change_mtu - entry point to change MTU size for the device. + * @dev : device pointer. + * @new_mtu : the new MTU size for the device. + * Description: the Maximum Transfer Unit (MTU) is used by the network layer + * to drive packet transmission. Ethernet has an MTU of 1500 octets + * (ETH_DATA_LEN). This value can be changed with ifconfig. + * Return value: + * 0 on success and an appropriate (-)ve integer as defined in errno.h + * file on failure. + */ +static int stmmac_change_mtu(struct net_device *dev, int new_mtu) +{ + struct stmmac_priv *priv = netdev_priv(dev); + int max_mtu; + + if (netif_running(dev)) { + pr_err("%s: must be stopped to change its MTU\n", dev->name); + return -EBUSY; + } + + if (priv->is_gmac) + max_mtu = JUMBO_LEN; + else + max_mtu = ETH_DATA_LEN; + + if ((new_mtu < 46) || (new_mtu > max_mtu)) { + pr_err("%s: invalid MTU, max MTU is: %d\n", dev->name, max_mtu); + return -EINVAL; + } + + dev->mtu = new_mtu; + + return 0; +} + +static irqreturn_t stmmac_interrupt(int irq, void *dev_id) +{ + struct net_device *dev = (struct net_device *)dev_id; + struct stmmac_priv *priv = netdev_priv(dev); + + if (unlikely(!dev)) { + pr_err("%s: invalid dev pointer\n", __func__); + return IRQ_NONE; + } + + if (priv->is_gmac) { + unsigned long ioaddr = dev->base_addr; + /* To handle GMAC own interrupts */ + priv->mac_type->ops->host_irq_status(ioaddr); + } + stmmac_dma_interrupt(dev); + + return IRQ_HANDLED; +} + +#ifdef CONFIG_NET_POLL_CONTROLLER +/* Polling receive - used by NETCONSOLE and other diagnostic tools + * to allow network I/O with interrupts disabled. */ +static void stmmac_poll_controller(struct net_device *dev) +{ + disable_irq(dev->irq); + stmmac_interrupt(dev->irq, dev); + enable_irq(dev->irq); +} +#endif + +/** + * stmmac_ioctl - Entry point for the Ioctl + * @dev: Device pointer. + * @rq: An IOCTL specefic structure, that can contain a pointer to + * a proprietary structure used to pass information to the driver. + * @cmd: IOCTL command + * Description: + * Currently there are no special functionality supported in IOCTL, just the + * phy_mii_ioctl(...) can be invoked. + */ +static int stmmac_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) +{ + struct stmmac_priv *priv = netdev_priv(dev); + int ret = -EOPNOTSUPP; + + if (!netif_running(dev)) + return -EINVAL; + + switch (cmd) { + case SIOCGMIIPHY: + case SIOCGMIIREG: + case SIOCSMIIREG: + if (!priv->phydev) + return -EINVAL; + + spin_lock(&priv->lock); + ret = phy_mii_ioctl(priv->phydev, if_mii(rq), cmd); + spin_unlock(&priv->lock); + default: + break; + } + return ret; +} + +#ifdef STMMAC_VLAN_TAG_USED +static void stmmac_vlan_rx_register(struct net_device *dev, + struct vlan_group *grp) +{ + struct stmmac_priv *priv = netdev_priv(dev); + + DBG(probe, INFO, "%s: Setting vlgrp to %p\n", dev->name, grp); + + spin_lock(&priv->lock); + priv->vlgrp = grp; + spin_unlock(&priv->lock); + + return; +} +#endif + +static const struct net_device_ops stmmac_netdev_ops = { + .ndo_open = stmmac_open, + .ndo_start_xmit = stmmac_xmit, + .ndo_stop = stmmac_release, + .ndo_change_mtu = stmmac_change_mtu, + .ndo_set_multicast_list = stmmac_multicast_list, + .ndo_tx_timeout = stmmac_tx_timeout, + .ndo_do_ioctl = stmmac_ioctl, + .ndo_set_config = stmmac_config, +#ifdef STMMAC_VLAN_TAG_USED + .ndo_vlan_rx_register = stmmac_vlan_rx_register, +#endif +#ifdef CONFIG_NET_POLL_CONTROLLER + .ndo_poll_controller = stmmac_poll_controller, +#endif + .ndo_set_mac_address = eth_mac_addr, +}; + +/** + * stmmac_probe - Initialization of the adapter . + * @dev : device pointer + * Description: The function initializes the network device structure for + * the STMMAC driver. It also calls the low level routines + * in order to init the HW (i.e. the DMA engine) + */ +static int stmmac_probe(struct net_device *dev) +{ + int ret = 0; + struct stmmac_priv *priv = netdev_priv(dev); + + ether_setup(dev); + + dev->netdev_ops = &stmmac_netdev_ops; + stmmac_set_ethtool_ops(dev); + + dev->features |= (NETIF_F_SG | NETIF_F_HW_CSUM | NETIF_F_HIGHDMA); + dev->watchdog_timeo = msecs_to_jiffies(watchdog); +#ifdef STMMAC_VLAN_TAG_USED + /* Both mac100 and gmac support receive VLAN tag detection */ + dev->features |= NETIF_F_HW_VLAN_RX; +#endif + priv->msg_enable = netif_msg_init(debug, default_msg_level); + + if (priv->is_gmac) + priv->rx_csum = 1; + + if (flow_ctrl) + priv->flow_ctrl = FLOW_AUTO; /* RX/TX pause on */ + + priv->pause = pause; + netif_napi_add(dev, &priv->napi, stmmac_poll, 64); + + /* Get the MAC address */ + priv->mac_type->ops->get_umac_addr(dev->base_addr, dev->dev_addr, 0); + + if (!is_valid_ether_addr(dev->dev_addr)) + pr_warning("\tno valid MAC address;" + "please, use ifconfig or nwhwconfig!\n"); + + ret = register_netdev(dev); + if (ret) { + pr_err("%s: ERROR %i registering the device\n", + __func__, ret); + return -ENODEV; + } + + DBG(probe, DEBUG, "%s: Scatter/Gather: %s - HW checksums: %s\n", + dev->name, (dev->features & NETIF_F_SG) ? "on" : "off", + (dev->features & NETIF_F_HW_CSUM) ? "on" : "off"); + + spin_lock_init(&priv->lock); + + return ret; +} + +/** + * stmmac_mac_device_setup + * @dev : device pointer + * Description: select and initialise the mac device (mac100 or Gmac). + */ +static int stmmac_mac_device_setup(struct net_device *dev) +{ + struct stmmac_priv *priv = netdev_priv(dev); + unsigned long ioaddr = dev->base_addr; + + struct mac_device_info *device; + + if (priv->is_gmac) + device = gmac_setup(ioaddr); + else + device = mac100_setup(ioaddr); + + if (!device) + return -ENOMEM; + + priv->mac_type = device; + + priv->wolenabled = priv->mac_type->hw.pmt; /* PMT supported */ + if (priv->wolenabled == PMT_SUPPORTED) + priv->wolopts = WAKE_MAGIC; /* Magic Frame */ + + return 0; +} + +static int stmmacphy_dvr_probe(struct platform_device *pdev) +{ + struct plat_stmmacphy_data *plat_dat; + plat_dat = (struct plat_stmmacphy_data *)((pdev->dev).platform_data); + + pr_debug("stmmacphy_dvr_probe: added phy for bus %d\n", + plat_dat->bus_id); + + return 0; +} + +static int stmmacphy_dvr_remove(struct platform_device *pdev) +{ + return 0; +} + +static struct platform_driver stmmacphy_driver = { + .driver = { + .name = PHY_RESOURCE_NAME, + }, + .probe = stmmacphy_dvr_probe, + .remove = stmmacphy_dvr_remove, +}; + +/** + * stmmac_associate_phy + * @dev: pointer to device structure + * @data: points to the private structure. + * Description: Scans through all the PHYs we have registered and checks if + * any are associated with our MAC. If so, then just fill in + * the blanks in our local context structure + */ +static int stmmac_associate_phy(struct device *dev, void *data) +{ + struct stmmac_priv *priv = (struct stmmac_priv *)data; + struct plat_stmmacphy_data *plat_dat; + + plat_dat = (struct plat_stmmacphy_data *)(dev->platform_data); + + DBG(probe, DEBUG, "%s: checking phy for bus %d\n", __func__, + plat_dat->bus_id); + + /* Check that this phy is for the MAC being initialised */ + if (priv->bus_id != plat_dat->bus_id) + return 0; + + /* OK, this PHY is connected to the MAC. + Go ahead and get the parameters */ + DBG(probe, DEBUG, "%s: OK. Found PHY config\n", __func__); + priv->phy_irq = + platform_get_irq_byname(to_platform_device(dev), "phyirq"); + DBG(probe, DEBUG, "%s: PHY irq on bus %d is %d\n", __func__, + plat_dat->bus_id, priv->phy_irq); + + /* Override with kernel parameters if supplied XXX CRS XXX + * this needs to have multiple instances */ + if ((phyaddr >= 0) && (phyaddr <= 31)) + plat_dat->phy_addr = phyaddr; + + priv->phy_addr = plat_dat->phy_addr; + priv->phy_mask = plat_dat->phy_mask; + priv->phy_interface = plat_dat->interface; + priv->phy_reset = plat_dat->phy_reset; + + DBG(probe, DEBUG, "%s: exiting\n", __func__); + return 1; /* forces exit of driver_for_each_device() */ +} + +/** + * stmmac_dvr_probe + * @pdev: platform device pointer + * Description: the driver is initialized through platform_device. + */ +static int stmmac_dvr_probe(struct platform_device *pdev) +{ + int ret = 0; + struct resource *res; + unsigned int *addr = NULL; + struct net_device *ndev = NULL; + struct stmmac_priv *priv; + struct plat_stmmacenet_data *plat_dat; + + pr_info("STMMAC driver:\n\tplatform registration... "); + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) { + ret = -ENODEV; + goto out; + } + pr_info("done!\n"); + + if (!request_mem_region(res->start, (res->end - res->start), + pdev->name)) { + pr_err("%s: ERROR: memory allocation failed" + "cannot get the I/O addr 0x%x\n", + __func__, (unsigned int)res->start); + ret = -EBUSY; + goto out; + } + + addr = ioremap(res->start, (res->end - res->start)); + if (!addr) { + pr_err("%s: ERROR: memory mapping failed \n", __func__); + ret = -ENOMEM; + goto out; + } + + ndev = alloc_etherdev(sizeof(struct stmmac_priv)); + if (!ndev) { + pr_err("%s: ERROR: allocating the device\n", __func__); + ret = -ENOMEM; + goto out; + } + + SET_NETDEV_DEV(ndev, &pdev->dev); + + /* Get the MAC information */ + ndev->irq = platform_get_irq_byname(pdev, "macirq"); + if (ndev->irq == -ENXIO) { + pr_err("%s: ERROR: MAC IRQ configuration " + "information not found\n", __func__); + ret = -ENODEV; + goto out; + } + + priv = netdev_priv(ndev); + priv->device = &(pdev->dev); + priv->dev = ndev; + plat_dat = (struct plat_stmmacenet_data *)((pdev->dev).platform_data); + priv->bus_id = plat_dat->bus_id; + priv->pbl = plat_dat->pbl; /* TLI */ + priv->is_gmac = plat_dat->has_gmac; /* GMAC is on board */ + + platform_set_drvdata(pdev, ndev); + + /* Set the I/O base addr */ + ndev->base_addr = (unsigned long)addr; + + /* MAC HW revice detection */ + ret = stmmac_mac_device_setup(ndev); + if (ret < 0) + goto out; + + /* Network Device Registration */ + ret = stmmac_probe(ndev); + if (ret < 0) + goto out; + + /* associate a PHY - it is provided by another platform bus */ + if (!driver_for_each_device + (&(stmmacphy_driver.driver), NULL, (void *)priv, + stmmac_associate_phy)) { + pr_err("No PHY device is associated with this MAC!\n"); + ret = -ENODEV; + goto out; + } + + priv->fix_mac_speed = plat_dat->fix_mac_speed; + priv->bsp_priv = plat_dat->bsp_priv; + + pr_info("\t%s - (dev. name: %s - id: %d, IRQ #%d\n" + "\tIO base addr: 0x%08x)\n", ndev->name, pdev->name, + pdev->id, ndev->irq, (unsigned int)addr); + + /* MDIO bus Registration */ + pr_debug("\tMDIO bus (id: %d)...", priv->bus_id); + ret = stmmac_mdio_register(ndev); + if (ret < 0) + goto out; + pr_debug("registered!\n"); + +out: + if (ret < 0) { + platform_set_drvdata(pdev, NULL); + release_mem_region(res->start, (res->end - res->start)); + if (addr != NULL) + iounmap(addr); + } + + return ret; +} + +/** + * stmmac_dvr_remove + * @pdev: platform device pointer + * Description: this function resets the TX/RX processes, disables the MAC RX/TX + * changes the link status, releases the DMA descriptor rings, + * unregisters the MDIO bus and unmaps the allocated memory. + */ +static int stmmac_dvr_remove(struct platform_device *pdev) +{ + struct net_device *ndev = platform_get_drvdata(pdev); + struct resource *res; + + pr_info("%s:\n\tremoving driver", __func__); + + stmmac_dma_stop_rx(ndev->base_addr); + stmmac_dma_stop_tx(ndev->base_addr); + + stmmac_mac_disable_rx(ndev->base_addr); + stmmac_mac_disable_tx(ndev->base_addr); + + netif_carrier_off(ndev); + + stmmac_mdio_unregister(ndev); + + platform_set_drvdata(pdev, NULL); + unregister_netdev(ndev); + + iounmap((void *)ndev->base_addr); + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + release_mem_region(res->start, (res->end - res->start)); + + free_netdev(ndev); + + return 0; +} + +#ifdef CONFIG_PM +static int stmmac_suspend(struct platform_device *pdev, pm_message_t state) +{ + struct net_device *dev = platform_get_drvdata(pdev); + struct stmmac_priv *priv = netdev_priv(dev); + int dis_ic = 0; + + if (!dev || !netif_running(dev)) + return 0; + + spin_lock(&priv->lock); + + if (state.event == PM_EVENT_SUSPEND) { + netif_device_detach(dev); + netif_stop_queue(dev); + if (priv->phydev) + phy_stop(priv->phydev); + +#ifdef CONFIG_STMMAC_TIMER + priv->tm->timer_stop(); + dis_ic = 1; +#endif + napi_disable(&priv->napi); + + /* Stop TX/RX DMA */ + stmmac_dma_stop_tx(dev->base_addr); + stmmac_dma_stop_rx(dev->base_addr); + /* Clear the Rx/Tx descriptors */ + priv->mac_type->ops->init_rx_desc(priv->dma_rx, + priv->dma_rx_size, dis_ic); + priv->mac_type->ops->init_tx_desc(priv->dma_tx, + priv->dma_tx_size); + + stmmac_mac_disable_tx(dev->base_addr); + + if (device_may_wakeup(&(pdev->dev))) { + /* Enable Power down mode by programming the PMT regs */ + if (priv->wolenabled == PMT_SUPPORTED) + priv->mac_type->ops->pmt(dev->base_addr, + priv->wolopts); + } else { + stmmac_mac_disable_rx(dev->base_addr); + } + } else { + priv->shutdown = 1; + /* Although this can appear slightly redundant it actually + * makes fast the standby operation and guarantees the driver + * working if hibernation is on media. */ + stmmac_release(dev); + } + + spin_unlock(&priv->lock); + return 0; +} + +static int stmmac_resume(struct platform_device *pdev) +{ + struct net_device *dev = platform_get_drvdata(pdev); + struct stmmac_priv *priv = netdev_priv(dev); + unsigned long ioaddr = dev->base_addr; + + if (!netif_running(dev)) + return 0; + + spin_lock(&priv->lock); + + if (priv->shutdown) { + /* Re-open the interface and re-init the MAC/DMA + and the rings. */ + stmmac_open(dev); + goto out_resume; + } + + /* Power Down bit, into the PM register, is cleared + * automatically as soon as a magic packet or a Wake-up frame + * is received. Anyway, it's better to manually clear + * this bit because it can generate problems while resuming + * from another devices (e.g. serial console). */ + if (device_may_wakeup(&(pdev->dev))) + if (priv->wolenabled == PMT_SUPPORTED) + priv->mac_type->ops->pmt(dev->base_addr, 0); + + netif_device_attach(dev); + + /* Enable the MAC and DMA */ + stmmac_mac_enable_rx(ioaddr); + stmmac_mac_enable_tx(ioaddr); + stmmac_dma_start_tx(ioaddr); + stmmac_dma_start_rx(ioaddr); + +#ifdef CONFIG_STMMAC_TIMER + priv->tm->timer_start(tmrate); +#endif + napi_enable(&priv->napi); + + if (priv->phydev) + phy_start(priv->phydev); + + netif_start_queue(dev); + +out_resume: + spin_unlock(&priv->lock); + return 0; +} +#endif + +static struct platform_driver stmmac_driver = { + .driver = { + .name = STMMAC_RESOURCE_NAME, + }, + .probe = stmmac_dvr_probe, + .remove = stmmac_dvr_remove, +#ifdef CONFIG_PM + .suspend = stmmac_suspend, + .resume = stmmac_resume, +#endif + +}; + +/** + * stmmac_init_module - Entry point for the driver + * Description: This function is the entry point for the driver. + */ +static int __init stmmac_init_module(void) +{ + int ret; + + if (platform_driver_register(&stmmacphy_driver)) { + pr_err("No PHY devices registered!\n"); + return -ENODEV; + } + + ret = platform_driver_register(&stmmac_driver); + return ret; +} + +/** + * stmmac_cleanup_module - Cleanup routine for the driver + * Description: This function is the cleanup routine for the driver. + */ +static void __exit stmmac_cleanup_module(void) +{ + platform_driver_unregister(&stmmacphy_driver); + platform_driver_unregister(&stmmac_driver); +} + +#ifndef MODULE +static int __init stmmac_cmdline_opt(char *str) +{ + char *opt; + + if (!str || !*str) + return -EINVAL; + while ((opt = strsep(&str, ",")) != NULL) { + if (!strncmp(opt, "debug:", 6)) + strict_strtoul(opt + 6, 0, (unsigned long *)&debug); + else if (!strncmp(opt, "phyaddr:", 8)) + strict_strtoul(opt + 8, 0, (unsigned long *)&phyaddr); + else if (!strncmp(opt, "dma_txsize:", 11)) + strict_strtoul(opt + 11, 0, + (unsigned long *)&dma_txsize); + else if (!strncmp(opt, "dma_rxsize:", 11)) + strict_strtoul(opt + 11, 0, + (unsigned long *)&dma_rxsize); + else if (!strncmp(opt, "buf_sz:", 7)) + strict_strtoul(opt + 7, 0, (unsigned long *)&buf_sz); + else if (!strncmp(opt, "tc:", 3)) + strict_strtoul(opt + 3, 0, (unsigned long *)&tc); + else if (!strncmp(opt, "tx_coe:", 7)) + strict_strtoul(opt + 7, 0, (unsigned long *)&tx_coe); + else if (!strncmp(opt, "watchdog:", 9)) + strict_strtoul(opt + 9, 0, (unsigned long *)&watchdog); + else if (!strncmp(opt, "flow_ctrl:", 10)) + strict_strtoul(opt + 10, 0, + (unsigned long *)&flow_ctrl); + else if (!strncmp(opt, "pause:", 6)) + strict_strtoul(opt + 6, 0, (unsigned long *)&pause); +#ifdef CONFIG_STMMAC_TIMER + else if (!strncmp(opt, "tmrate:", 7)) + strict_strtoul(opt + 7, 0, (unsigned long *)&tmrate); +#endif + } + return 0; +} + +__setup("stmmaceth=", stmmac_cmdline_opt); +#endif + +module_init(stmmac_init_module); +module_exit(stmmac_cleanup_module); + +MODULE_DESCRIPTION("STMMAC 10/100/1000 Ethernet driver"); +MODULE_AUTHOR("Giuseppe Cavallaro "); +MODULE_LICENSE("GPL"); diff --git a/drivers/net/stmmac/stmmac_mdio.c b/drivers/net/stmmac/stmmac_mdio.c new file mode 100644 index 000000000000..8498552a22fc --- /dev/null +++ b/drivers/net/stmmac/stmmac_mdio.c @@ -0,0 +1,217 @@ +/******************************************************************************* + STMMAC Ethernet Driver -- MDIO bus implementation + Provides Bus interface for MII registers + + Copyright (C) 2007-2009 STMicroelectronics Ltd + + This program is free software; you can redistribute it and/or modify it + under the terms and conditions of the GNU General Public License, + version 2, as published by the Free Software Foundation. + + This program is distributed in the hope it will be useful, but WITHOUT + ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + more details. + + You should have received a copy of the GNU General Public License along with + this program; if not, write to the Free Software Foundation, Inc., + 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + + The full GNU General Public License is included in this distribution in + the file called "COPYING". + + Author: Carl Shaw + Maintainer: Giuseppe Cavallaro +*******************************************************************************/ + +#include +#include +#include + +#include "stmmac.h" + +#define MII_BUSY 0x00000001 +#define MII_WRITE 0x00000002 + +/** + * stmmac_mdio_read + * @bus: points to the mii_bus structure + * @phyaddr: MII addr reg bits 15-11 + * @phyreg: MII addr reg bits 10-6 + * Description: it reads data from the MII register from within the phy device. + * For the 7111 GMAC, we must set the bit 0 in the MII address register while + * accessing the PHY registers. + * Fortunately, it seems this has no drawback for the 7109 MAC. + */ +static int stmmac_mdio_read(struct mii_bus *bus, int phyaddr, int phyreg) +{ + struct net_device *ndev = bus->priv; + struct stmmac_priv *priv = netdev_priv(ndev); + unsigned long ioaddr = ndev->base_addr; + unsigned int mii_address = priv->mac_type->hw.mii.addr; + unsigned int mii_data = priv->mac_type->hw.mii.data; + + int data; + u16 regValue = (((phyaddr << 11) & (0x0000F800)) | + ((phyreg << 6) & (0x000007C0))); + regValue |= MII_BUSY; /* in case of GMAC */ + + do {} while (((readl(ioaddr + mii_address)) & MII_BUSY) == 1); + writel(regValue, ioaddr + mii_address); + do {} while (((readl(ioaddr + mii_address)) & MII_BUSY) == 1); + + /* Read the data from the MII data register */ + data = (int)readl(ioaddr + mii_data); + + return data; +} + +/** + * stmmac_mdio_write + * @bus: points to the mii_bus structure + * @phyaddr: MII addr reg bits 15-11 + * @phyreg: MII addr reg bits 10-6 + * @phydata: phy data + * Description: it writes the data into the MII register from within the device. + */ +static int stmmac_mdio_write(struct mii_bus *bus, int phyaddr, int phyreg, + u16 phydata) +{ + struct net_device *ndev = bus->priv; + struct stmmac_priv *priv = netdev_priv(ndev); + unsigned long ioaddr = ndev->base_addr; + unsigned int mii_address = priv->mac_type->hw.mii.addr; + unsigned int mii_data = priv->mac_type->hw.mii.data; + + u16 value = + (((phyaddr << 11) & (0x0000F800)) | ((phyreg << 6) & (0x000007C0))) + | MII_WRITE; + + value |= MII_BUSY; + + /* Wait until any existing MII operation is complete */ + do {} while (((readl(ioaddr + mii_address)) & MII_BUSY) == 1); + + /* Set the MII address register to write */ + writel(phydata, ioaddr + mii_data); + writel(value, ioaddr + mii_address); + + /* Wait until any existing MII operation is complete */ + do {} while (((readl(ioaddr + mii_address)) & MII_BUSY) == 1); + + return 0; +} + +/** + * stmmac_mdio_reset + * @bus: points to the mii_bus structure + * Description: reset the MII bus + */ +static int stmmac_mdio_reset(struct mii_bus *bus) +{ + struct net_device *ndev = bus->priv; + struct stmmac_priv *priv = netdev_priv(ndev); + unsigned long ioaddr = ndev->base_addr; + unsigned int mii_address = priv->mac_type->hw.mii.addr; + + if (priv->phy_reset) { + pr_debug("stmmac_mdio_reset: calling phy_reset\n"); + priv->phy_reset(priv->bsp_priv); + } + + /* This is a workaround for problems with the STE101P PHY. + * It doesn't complete its reset until at least one clock cycle + * on MDC, so perform a dummy mdio read. + */ + writel(0, ioaddr + mii_address); + + return 0; +} + +/** + * stmmac_mdio_register + * @ndev: net device structure + * Description: it registers the MII bus + */ +int stmmac_mdio_register(struct net_device *ndev) +{ + int err = 0; + struct mii_bus *new_bus; + int *irqlist; + struct stmmac_priv *priv = netdev_priv(ndev); + int addr, found; + + new_bus = mdiobus_alloc(); + if (new_bus == NULL) + return -ENOMEM; + + irqlist = kzalloc(sizeof(int) * PHY_MAX_ADDR, GFP_KERNEL); + if (irqlist == NULL) { + err = -ENOMEM; + goto irqlist_alloc_fail; + } + + /* Assign IRQ to phy at address phy_addr */ + if (priv->phy_addr != -1) + irqlist[priv->phy_addr] = priv->phy_irq; + + new_bus->name = "STMMAC MII Bus"; + new_bus->read = &stmmac_mdio_read; + new_bus->write = &stmmac_mdio_write; + new_bus->reset = &stmmac_mdio_reset; + snprintf(new_bus->id, MII_BUS_ID_SIZE, "%x", priv->bus_id); + new_bus->priv = ndev; + new_bus->irq = irqlist; + new_bus->phy_mask = priv->phy_mask; + new_bus->parent = priv->device; + err = mdiobus_register(new_bus); + if (err != 0) { + pr_err("%s: Cannot register as MDIO bus\n", new_bus->name); + goto bus_register_fail; + } + + priv->mii = new_bus; + + found = 0; + for (addr = 0; addr < 32; addr++) { + struct phy_device *phydev = new_bus->phy_map[addr]; + if (phydev) { + if (priv->phy_addr == -1) { + priv->phy_addr = addr; + phydev->irq = priv->phy_irq; + irqlist[addr] = priv->phy_irq; + } + pr_info("%s: PHY ID %08x at %d IRQ %d (%s)%s\n", + ndev->name, phydev->phy_id, addr, + phydev->irq, dev_name(&phydev->dev), + (addr == priv->phy_addr) ? " active" : ""); + found = 1; + } + } + + if (!found) + pr_warning("%s: No PHY found\n", ndev->name); + + return 0; +bus_register_fail: + kfree(irqlist); +irqlist_alloc_fail: + kfree(new_bus); + return err; +} + +/** + * stmmac_mdio_unregister + * @ndev: net device structure + * Description: it unregisters the MII bus + */ +int stmmac_mdio_unregister(struct net_device *ndev) +{ + struct stmmac_priv *priv = netdev_priv(ndev); + + mdiobus_unregister(priv->mii); + priv->mii->priv = NULL; + kfree(priv->mii); + + return 0; +} diff --git a/drivers/net/stmmac/stmmac_timer.c b/drivers/net/stmmac/stmmac_timer.c new file mode 100644 index 000000000000..b838c6582077 --- /dev/null +++ b/drivers/net/stmmac/stmmac_timer.c @@ -0,0 +1,140 @@ +/******************************************************************************* + STMMAC external timer support. + + Copyright (C) 2007-2009 STMicroelectronics Ltd + + This program is free software; you can redistribute it and/or modify it + under the terms and conditions of the GNU General Public License, + version 2, as published by the Free Software Foundation. + + This program is distributed in the hope it will be useful, but WITHOUT + ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + more details. + + You should have received a copy of the GNU General Public License along with + this program; if not, write to the Free Software Foundation, Inc., + 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + + The full GNU General Public License is included in this distribution in + the file called "COPYING". + + Author: Giuseppe Cavallaro +*******************************************************************************/ + +#include +#include +#include "stmmac_timer.h" + +static void stmmac_timer_handler(void *data) +{ + struct net_device *dev = (struct net_device *)data; + + stmmac_schedule(dev); + + return; +} + +#define STMMAC_TIMER_MSG(timer, freq) \ +printk(KERN_INFO "stmmac_timer: %s Timer ON (freq %dHz)\n", timer, freq); + +#if defined(CONFIG_STMMAC_RTC_TIMER) +#include +static struct rtc_device *stmmac_rtc; +static rtc_task_t stmmac_task; + +static void stmmac_rtc_start(unsigned int new_freq) +{ + rtc_irq_set_freq(stmmac_rtc, &stmmac_task, new_freq); + rtc_irq_set_state(stmmac_rtc, &stmmac_task, 1); + return; +} + +static void stmmac_rtc_stop(void) +{ + rtc_irq_set_state(stmmac_rtc, &stmmac_task, 0); + return; +} + +int stmmac_open_ext_timer(struct net_device *dev, struct stmmac_timer *tm) +{ + stmmac_task.private_data = dev; + stmmac_task.func = stmmac_timer_handler; + + stmmac_rtc = rtc_class_open(CONFIG_RTC_HCTOSYS_DEVICE); + if (stmmac_rtc == NULL) { + pr_error("open rtc device failed\n"); + return -ENODEV; + } + + rtc_irq_register(stmmac_rtc, &stmmac_task); + + /* Periodic mode is not supported */ + if ((rtc_irq_set_freq(stmmac_rtc, &stmmac_task, tm->freq) < 0)) { + pr_error("set periodic failed\n"); + rtc_irq_unregister(stmmac_rtc, &stmmac_task); + rtc_class_close(stmmac_rtc); + return -1; + } + + STMMAC_TIMER_MSG(CONFIG_RTC_HCTOSYS_DEVICE, tm->freq); + + tm->timer_start = stmmac_rtc_start; + tm->timer_stop = stmmac_rtc_stop; + + return 0; +} + +int stmmac_close_ext_timer(void) +{ + rtc_irq_set_state(stmmac_rtc, &stmmac_task, 0); + rtc_irq_unregister(stmmac_rtc, &stmmac_task); + rtc_class_close(stmmac_rtc); + return 0; +} + +#elif defined(CONFIG_STMMAC_TMU_TIMER) +#include +#define TMU_CHANNEL "tmu2_clk" +static struct clk *timer_clock; + +static void stmmac_tmu_start(unsigned int new_freq) +{ + clk_set_rate(timer_clock, new_freq); + clk_enable(timer_clock); + return; +} + +static void stmmac_tmu_stop(void) +{ + clk_disable(timer_clock); + return; +} + +int stmmac_open_ext_timer(struct net_device *dev, struct stmmac_timer *tm) +{ + timer_clock = clk_get(NULL, TMU_CHANNEL); + + if (timer_clock == NULL) + return -1; + + if (tmu2_register_user(stmmac_timer_handler, (void *)dev) < 0) { + timer_clock = NULL; + return -1; + } + + STMMAC_TIMER_MSG("TMU2", tm->freq); + tm->timer_start = stmmac_tmu_start; + tm->timer_stop = stmmac_tmu_stop; + + return 0; +} + +int stmmac_close_ext_timer(void) +{ + clk_disable(timer_clock); + tmu2_unregister_user(); + clk_put(timer_clock); + return 0; +} +#endif diff --git a/drivers/net/stmmac/stmmac_timer.h b/drivers/net/stmmac/stmmac_timer.h new file mode 100644 index 000000000000..f795cae33725 --- /dev/null +++ b/drivers/net/stmmac/stmmac_timer.h @@ -0,0 +1,41 @@ +/******************************************************************************* + STMMAC external timer Header File. + + Copyright (C) 2007-2009 STMicroelectronics Ltd + + This program is free software; you can redistribute it and/or modify it + under the terms and conditions of the GNU General Public License, + version 2, as published by the Free Software Foundation. + + This program is distributed in the hope it will be useful, but WITHOUT + ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + more details. + + You should have received a copy of the GNU General Public License along with + this program; if not, write to the Free Software Foundation, Inc., + 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + + The full GNU General Public License is included in this distribution in + the file called "COPYING". + + Author: Giuseppe Cavallaro +*******************************************************************************/ + +struct stmmac_timer { + void (*timer_start) (unsigned int new_freq); + void (*timer_stop) (void); + unsigned int freq; +}; + +/* Open the HW timer device and return 0 in case of success */ +int stmmac_open_ext_timer(struct net_device *dev, struct stmmac_timer *tm); +/* Stop the timer and release it */ +int stmmac_close_ext_timer(void); +/* Function used for scheduling task within the stmmac */ +void stmmac_schedule(struct net_device *dev); + +#if defined(CONFIG_STMMAC_TMU_TIMER) +extern int tmu2_register_user(void *fnt, void *data); +extern void tmu2_unregister_user(void); +#endif -- cgit v1.2.3-59-g8ed1b From 8f7e524ce33ca81b663711404709396165da3cbd Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Wed, 14 Oct 2009 20:38:58 -0700 Subject: vmxnet: fix 2 build problems vmxnet3 uses in_dev* interfaces so it should depend on INET. Also fix so that the driver builds when CONFIG_PCI_MSI is disabled. vmxnet3_drv.c:(.text+0x2a88cb): undefined reference to `in_dev_finish_destroy' drivers/net/vmxnet3/vmxnet3_drv.c:1335: error: 'struct vmxnet3_intr' has no member named 'msix_entries' drivers/net/vmxnet3/vmxnet3_drv.c:1384: error: 'struct vmxnet3_intr' has no member named 'msix_entries' drivers/net/vmxnet3/vmxnet3_drv.c:2137: error: 'struct vmxnet3_intr' has no member named 'msix_entries' drivers/net/vmxnet3/vmxnet3_drv.c:2138: error: 'struct vmxnet3_intr' has no member named 'msix_entries' Signed-off-by: Randy Dunlap Signed-off-by: Bhavesh davda Signed-off-by: David S. Miller --- drivers/net/Kconfig | 2 +- drivers/net/vmxnet3/vmxnet3_drv.c | 11 ++++++++++- 2 files changed, 11 insertions(+), 2 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index ce2eba173865..e19ca4bb7510 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -3235,7 +3235,7 @@ config VIRTIO_NET config VMXNET3 tristate "VMware VMXNET3 ethernet driver" - depends on PCI && X86 + depends on PCI && X86 && INET help This driver supports VMware's vmxnet3 virtual ethernet NIC. To compile this driver as a module, choose M here: the diff --git a/drivers/net/vmxnet3/vmxnet3_drv.c b/drivers/net/vmxnet3/vmxnet3_drv.c index 44fb0c5a2800..6a16f76f277e 100644 --- a/drivers/net/vmxnet3/vmxnet3_drv.c +++ b/drivers/net/vmxnet3/vmxnet3_drv.c @@ -1314,9 +1314,11 @@ vmxnet3_netpoll(struct net_device *netdev) struct vmxnet3_adapter *adapter = netdev_priv(netdev); int irq; +#ifdef CONFIG_PCI_MSI if (adapter->intr.type == VMXNET3_IT_MSIX) irq = adapter->intr.msix_entries[0].vector; else +#endif irq = adapter->pdev->irq; disable_irq(irq); @@ -1330,12 +1332,15 @@ vmxnet3_request_irqs(struct vmxnet3_adapter *adapter) { int err; +#ifdef CONFIG_PCI_MSI if (adapter->intr.type == VMXNET3_IT_MSIX) { /* we only use 1 MSI-X vector */ err = request_irq(adapter->intr.msix_entries[0].vector, vmxnet3_intr, 0, adapter->netdev->name, adapter->netdev); - } else if (adapter->intr.type == VMXNET3_IT_MSI) { + } else +#endif + if (adapter->intr.type == VMXNET3_IT_MSI) { err = request_irq(adapter->pdev->irq, vmxnet3_intr, 0, adapter->netdev->name, adapter->netdev); } else { @@ -1376,6 +1381,7 @@ vmxnet3_free_irqs(struct vmxnet3_adapter *adapter) adapter->intr.num_intrs <= 0); switch (adapter->intr.type) { +#ifdef CONFIG_PCI_MSI case VMXNET3_IT_MSIX: { int i; @@ -1385,6 +1391,7 @@ vmxnet3_free_irqs(struct vmxnet3_adapter *adapter) adapter->netdev); break; } +#endif case VMXNET3_IT_MSI: free_irq(adapter->pdev->irq, adapter->netdev); break; @@ -2134,6 +2141,7 @@ vmxnet3_alloc_intr_resources(struct vmxnet3_adapter *adapter) if (adapter->intr.type == VMXNET3_IT_AUTO) { int err; +#ifdef CONFIG_PCI_MSI adapter->intr.msix_entries[0].entry = 0; err = pci_enable_msix(adapter->pdev, adapter->intr.msix_entries, VMXNET3_LINUX_MAX_MSIX_VECT); @@ -2142,6 +2150,7 @@ vmxnet3_alloc_intr_resources(struct vmxnet3_adapter *adapter) adapter->intr.type = VMXNET3_IT_MSIX; return; } +#endif err = pci_enable_msi(adapter->pdev); if (!err) { -- cgit v1.2.3-59-g8ed1b From 73d540f282c0d8ce48fafd7fcc844e91f31d4103 Mon Sep 17 00:00:00 2001 From: Sathya Perla Date: Wed, 14 Oct 2009 20:20:42 +0000 Subject: be2net: fix promiscuous and multicast promiscuous modes being enabled always Signed-off-by: Sathya Perla Signed-off-by: David S. Miller --- drivers/net/benet/be_cmds.c | 8 ++++---- drivers/net/benet/be_cmds.h | 5 +++-- drivers/net/benet/be_main.c | 19 +++++++++++-------- 3 files changed, 18 insertions(+), 14 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/benet/be_cmds.c b/drivers/net/benet/be_cmds.c index 89876ade5e33..b57abc0c9f48 100644 --- a/drivers/net/benet/be_cmds.c +++ b/drivers/net/benet/be_cmds.c @@ -729,8 +729,8 @@ int be_cmd_q_destroy(struct be_adapter *adapter, struct be_queue_info *q, /* Create an rx filtering policy configuration on an i/f * Uses mbox */ -int be_cmd_if_create(struct be_adapter *adapter, u32 flags, u8 *mac, - bool pmac_invalid, u32 *if_handle, u32 *pmac_id) +int be_cmd_if_create(struct be_adapter *adapter, u32 cap_flags, u32 en_flags, + u8 *mac, bool pmac_invalid, u32 *if_handle, u32 *pmac_id) { struct be_mcc_wrb *wrb; struct be_cmd_req_if_create *req; @@ -746,8 +746,8 @@ int be_cmd_if_create(struct be_adapter *adapter, u32 flags, u8 *mac, be_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_COMMON, OPCODE_COMMON_NTWK_INTERFACE_CREATE, sizeof(*req)); - req->capability_flags = cpu_to_le32(flags); - req->enable_flags = cpu_to_le32(flags); + req->capability_flags = cpu_to_le32(cap_flags); + req->enable_flags = cpu_to_le32(en_flags); req->pmac_invalid = pmac_invalid; if (!pmac_invalid) memcpy(req->mac_addr, mac, ETH_ALEN); diff --git a/drivers/net/benet/be_cmds.h b/drivers/net/benet/be_cmds.h index a86f917f85f4..49953787e41c 100644 --- a/drivers/net/benet/be_cmds.h +++ b/drivers/net/benet/be_cmds.h @@ -720,8 +720,9 @@ extern int be_cmd_mac_addr_query(struct be_adapter *adapter, u8 *mac_addr, extern int be_cmd_pmac_add(struct be_adapter *adapter, u8 *mac_addr, u32 if_id, u32 *pmac_id); extern int be_cmd_pmac_del(struct be_adapter *adapter, u32 if_id, u32 pmac_id); -extern int be_cmd_if_create(struct be_adapter *adapter, u32 if_flags, u8 *mac, - bool pmac_invalid, u32 *if_handle, u32 *pmac_id); +extern int be_cmd_if_create(struct be_adapter *adapter, u32 cap_flags, + u32 en_flags, u8 *mac, bool pmac_invalid, + u32 *if_handle, u32 *pmac_id); extern int be_cmd_if_destroy(struct be_adapter *adapter, u32 if_handle); extern int be_cmd_eq_create(struct be_adapter *adapter, struct be_queue_info *eq, int eq_delay); diff --git a/drivers/net/benet/be_main.c b/drivers/net/benet/be_main.c index 6d5e81f7046f..36cb94869b01 100644 --- a/drivers/net/benet/be_main.c +++ b/drivers/net/benet/be_main.c @@ -1620,19 +1620,22 @@ static int be_open(struct net_device *netdev) static int be_setup(struct be_adapter *adapter) { struct net_device *netdev = adapter->netdev; - u32 if_flags; + u32 cap_flags, en_flags; int status; - if_flags = BE_IF_FLAGS_BROADCAST | BE_IF_FLAGS_PROMISCUOUS | - BE_IF_FLAGS_MCAST_PROMISCUOUS | BE_IF_FLAGS_UNTAGGED | - BE_IF_FLAGS_PASS_L3L4_ERRORS; - status = be_cmd_if_create(adapter, if_flags, netdev->dev_addr, - false/* pmac_invalid */, &adapter->if_handle, - &adapter->pmac_id); + cap_flags = BE_IF_FLAGS_UNTAGGED | BE_IF_FLAGS_BROADCAST | + BE_IF_FLAGS_MCAST_PROMISCUOUS | + BE_IF_FLAGS_PROMISCUOUS | + BE_IF_FLAGS_PASS_L3L4_ERRORS; + en_flags = BE_IF_FLAGS_UNTAGGED | BE_IF_FLAGS_BROADCAST | + BE_IF_FLAGS_PASS_L3L4_ERRORS; + + status = be_cmd_if_create(adapter, cap_flags, en_flags, + netdev->dev_addr, false/* pmac_invalid */, + &adapter->if_handle, &adapter->pmac_id); if (status != 0) goto do_none; - status = be_tx_queues_create(adapter); if (status != 0) goto if_destroy; -- cgit v1.2.3-59-g8ed1b From 43a04fdc369ce4fb6718b95e1c930ff8661e65c1 Mon Sep 17 00:00:00 2001 From: Sathya Perla Date: Wed, 14 Oct 2009 20:21:17 +0000 Subject: be2net: fix support for PCI hot plug Before issuing any cmds to the FW, the driver must first wait till the fW becomes ready. This is needed for PCI hot plug when the driver can be probed while the card fw is being initialized. Signed-off-by: Sathya Perla Signed-off-by: David S. Miller --- drivers/net/benet/be_cmds.c | 25 ++++++++++++++++++------- drivers/net/benet/be_main.c | 8 ++++---- 2 files changed, 22 insertions(+), 11 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/benet/be_cmds.c b/drivers/net/benet/be_cmds.c index b57abc0c9f48..28a0eda92680 100644 --- a/drivers/net/benet/be_cmds.c +++ b/drivers/net/benet/be_cmds.c @@ -243,15 +243,26 @@ static int be_POST_stage_get(struct be_adapter *adapter, u16 *stage) int be_cmd_POST(struct be_adapter *adapter) { - u16 stage, error; + u16 stage; + int status, timeout = 0; - error = be_POST_stage_get(adapter, &stage); - if (error || stage != POST_STAGE_ARMFW_RDY) { - dev_err(&adapter->pdev->dev, "POST failed.\n"); - return -1; - } + do { + status = be_POST_stage_get(adapter, &stage); + if (status) { + dev_err(&adapter->pdev->dev, "POST error; stage=0x%x\n", + stage); + return -1; + } else if (stage != POST_STAGE_ARMFW_RDY) { + set_current_state(TASK_INTERRUPTIBLE); + schedule_timeout(2 * HZ); + timeout += 2; + } else { + return 0; + } + } while (timeout < 20); - return 0; + dev_err(&adapter->pdev->dev, "POST timeout; stage=0x%x\n", stage); + return -1; } static inline void *embedded_payload(struct be_mcc_wrb *wrb) diff --git a/drivers/net/benet/be_main.c b/drivers/net/benet/be_main.c index 36cb94869b01..1f941f027718 100644 --- a/drivers/net/benet/be_main.c +++ b/drivers/net/benet/be_main.c @@ -2058,6 +2058,10 @@ static int be_hw_up(struct be_adapter *adapter) if (status) return status; + status = be_cmd_reset_function(adapter); + if (status) + return status; + status = be_cmd_get_fw_ver(adapter, adapter->fw_ver); if (status) return status; @@ -2111,10 +2115,6 @@ static int __devinit be_probe(struct pci_dev *pdev, if (status) goto free_netdev; - status = be_cmd_reset_function(adapter); - if (status) - goto ctrl_clean; - status = be_stats_init(adapter); if (status) goto ctrl_clean; -- cgit v1.2.3-59-g8ed1b From ed79bab847d8e5a2986d8ff43c49c6fb8ee3265f Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Wed, 14 Oct 2009 14:36:43 +0000 Subject: virtio_net: use dev_kfree_skb_any() in free_old_xmit_skbs() Because netpoll can call netdevice start_xmit() method with irqs disabled, drivers should not call kfree_skb() from their start_xmit(), but use dev_kfree_skb_any() instead. Oct 8 11:16:52 172.30.1.31 [113074.791813] ------------[ cut here ]------------ Oct 8 11:16:52 172.30.1.31 [113074.791813] WARNING: at net/core/skbuff.c:398 \ skb_release_head_state+0x64/0xc8() Oct 8 11:16:52 172.30.1.31 [113074.791813] Hardware name: Oct 8 11:16:52 172.30.1.31 [113074.791813] Modules linked in: netconsole ocfs2 jbd2 quota_tree \ ocfs2_dlmfs ocfs2_stack_o2cb ocfs2_dlm ocfs2_nodemanager ocfs2_stackglue configfs crc32c drbd cn loop \ serio_raw psmouse snd_pcm snd_timer snd soundcore snd_page_alloc virtio_net pcspkr parport_pc parport \ i2c_piix4 i2c_core button processor evdev ext3 jbd mbcache dm_mirror dm_region_hash dm_log dm_snapshot \ dm_mod ide_cd_mod cdrom ata_generic ata_piix virtio_blk libata scsi_mod piix ide_pci_generic ide_core \ virtio_pci virtio_ring virtio floppy thermal fan thermal_sys [last unloaded: netconsole] Oct 8 11:16:52 172.30.1.31 [113074.791813] Pid: 11132, comm: php5-cgi Tainted: G W \ 2.6.31.2-vserver #1 Oct 8 11:16:52 172.30.1.31 [113074.791813] Call Trace: Oct 8 11:16:52 172.30.1.31 [113074.791813] [] ? \ skb_release_head_state+0x64/0xc8 Oct 8 11:16:52 172.30.1.31 [113074.791813] [] ? skb_release_head_state+0x64/0xc8 Oct 8 11:16:52 172.30.1.31 [113074.791813] [] ? warn_slowpath_common+0x77/0xa3 Oct 8 11:16:52 172.30.1.31 [113074.791813] [] ? skb_release_head_state+0x64/0xc8 Oct 8 11:16:52 172.30.1.31 [113074.791813] [] ? __kfree_skb+0x9/0x7d Oct 8 11:16:52 172.30.1.31 [113074.791813] [] ? free_old_xmit_skbs+0x51/0x6e \ [virtio_net] Oct 8 11:16:52 172.30.1.31 [113074.791813] [] ? start_xmit+0x26/0xf2 [virtio_net] Oct 8 11:16:52 172.30.1.31 [113074.791813] [] ? netpoll_send_skb+0xd2/0x205 Oct 8 11:16:52 172.30.1.31 [113074.791813] [] ? write_msg+0x90/0xeb [netconsole] Oct 8 11:16:52 172.30.1.31 [113074.791813] [] ? __call_console_drivers+0x5e/0x6f Oct 8 11:16:52 172.30.1.31 [113074.791813] [] ? kvm_clock_read+0x4d/0x52 Oct 8 11:16:52 172.30.1.31 [113074.791813] [] ? release_console_sem+0x115/0x1ba Oct 8 11:16:52 172.30.1.31 [113074.791813] [] ? vprintk+0x2f2/0x34b Oct 8 11:16:52 172.30.1.31 [113074.791813] [] ? vx_update_load+0x18/0x13e Oct 8 11:16:52 172.30.1.31 [113074.791813] [] ? printk+0x4e/0x5d Oct 8 11:16:52 172.30.1.31 [113074.791813] [] ? kvm_clock_read+0x4d/0x52 Oct 8 11:16:52 172.30.1.31 [113074.791813] [] ? getnstimeofday+0x55/0xaf Oct 8 11:16:52 172.30.1.31 [113074.791813] [] ? ktime_get_ts+0x21/0x49 Oct 8 11:16:52 172.30.1.31 [113074.791813] [] ? ktime_get+0xc/0x41 Oct 8 11:16:52 172.30.1.31 [113074.791813] [] ? hrtimer_interrupt+0x9c/0x146 Oct 8 11:16:52 172.30.1.31 [113074.791813] [] ? smp_apic_timer_interrupt+0x80/0x93 Oct 8 11:16:52 172.30.1.31 [113074.791813] [] ? apic_timer_interrupt+0x13/0x20 Oct 8 11:16:52 172.30.1.31 [113074.791813] [] ? _spin_unlock_irq+0xd/0x31 Reported-and-tested-by: Massimo Cetra Signed-off-by: Eric Dumazet Bug-Entry: http://bugzilla.kernel.org/show_bug.cgi?id=14378 Signed-off-by: David S. Miller --- drivers/net/virtio_net.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c index 8d009760277c..54bf0912b737 100644 --- a/drivers/net/virtio_net.c +++ b/drivers/net/virtio_net.c @@ -454,7 +454,7 @@ static unsigned int free_old_xmit_skbs(struct virtnet_info *vi) vi->dev->stats.tx_bytes += skb->len; vi->dev->stats.tx_packets++; tot_sgs += skb_vnet_hdr(skb)->num_sg; - kfree_skb(skb); + dev_kfree_skb_any(skb); } return tot_sgs; } -- cgit v1.2.3-59-g8ed1b From f6965582ac9b87d875aac8e23afdb03fe35ee33d Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Fri, 16 Oct 2009 17:54:34 -0700 Subject: vmxnet3: use dev_dbg, fix build for CONFIG_BLOCK=n vmxnet3 was using dprintk() for debugging output. This was defined in and was the only thing that was used from that header file. This caused compile errors when CONFIG_BLOCK was not enabled due to bio* and BIO* uses in the header file, so change this driver to use dev_dbg() for debugging output. include/linux/dst.h:520: error: dereferencing pointer to incomplete type include/linux/dst.h:520: error: 'BIO_POOL_BITS' undeclared (first use in this function) include/linux/dst.h:521: error: dereferencing pointer to incomplete type include/linux/dst.h:522: error: dereferencing pointer to incomplete type include/linux/dst.h:525: error: dereferencing pointer to incomplete type make[4]: *** [drivers/net/vmxnet3/vmxnet3_drv.o] Error 1 Signed-off-by: Randy Dunlap Signed-off-by: Bhavesh Davda Signed-off-by: David S. Miller --- drivers/net/vmxnet3/vmxnet3_drv.c | 27 ++++++++++++++++++--------- drivers/net/vmxnet3/vmxnet3_int.h | 2 +- 2 files changed, 19 insertions(+), 10 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/vmxnet3/vmxnet3_drv.c b/drivers/net/vmxnet3/vmxnet3_drv.c index 6a16f76f277e..004353a46af0 100644 --- a/drivers/net/vmxnet3/vmxnet3_drv.c +++ b/drivers/net/vmxnet3/vmxnet3_drv.c @@ -481,7 +481,8 @@ vmxnet3_rq_alloc_rx_buf(struct vmxnet3_rx_queue *rq, u32 ring_idx, } rq->uncommitted[ring_idx] += num_allocated; - dprintk(KERN_ERR "alloc_rx_buf: %d allocated, next2fill %u, next2comp " + dev_dbg(&adapter->netdev->dev, + "alloc_rx_buf: %d allocated, next2fill %u, next2comp " "%u, uncommited %u\n", num_allocated, ring->next2fill, ring->next2comp, rq->uncommitted[ring_idx]); @@ -539,7 +540,8 @@ vmxnet3_map_pkt(struct sk_buff *skb, struct vmxnet3_tx_ctx *ctx, tbi = tq->buf_info + tq->tx_ring.next2fill; tbi->map_type = VMXNET3_MAP_NONE; - dprintk(KERN_ERR "txd[%u]: 0x%Lx 0x%x 0x%x\n", + dev_dbg(&adapter->netdev->dev, + "txd[%u]: 0x%Lx 0x%x 0x%x\n", tq->tx_ring.next2fill, ctx->sop_txd->txd.addr, ctx->sop_txd->dword[2], ctx->sop_txd->dword[3]); vmxnet3_cmd_ring_adv_next2fill(&tq->tx_ring); @@ -572,7 +574,8 @@ vmxnet3_map_pkt(struct sk_buff *skb, struct vmxnet3_tx_ctx *ctx, gdesc->dword[2] = dw2 | buf_size; gdesc->dword[3] = 0; - dprintk(KERN_ERR "txd[%u]: 0x%Lx 0x%x 0x%x\n", + dev_dbg(&adapter->netdev->dev, + "txd[%u]: 0x%Lx 0x%x 0x%x\n", tq->tx_ring.next2fill, gdesc->txd.addr, gdesc->dword[2], gdesc->dword[3]); vmxnet3_cmd_ring_adv_next2fill(&tq->tx_ring); @@ -600,7 +603,8 @@ vmxnet3_map_pkt(struct sk_buff *skb, struct vmxnet3_tx_ctx *ctx, gdesc->dword[2] = dw2 | frag->size; gdesc->dword[3] = 0; - dprintk(KERN_ERR "txd[%u]: 0x%llu %u %u\n", + dev_dbg(&adapter->netdev->dev, + "txd[%u]: 0x%llu %u %u\n", tq->tx_ring.next2fill, gdesc->txd.addr, gdesc->dword[2], gdesc->dword[3]); vmxnet3_cmd_ring_adv_next2fill(&tq->tx_ring); @@ -697,7 +701,8 @@ vmxnet3_parse_and_copy_hdr(struct sk_buff *skb, struct vmxnet3_tx_queue *tq, tdd = tq->data_ring.base + tq->tx_ring.next2fill; memcpy(tdd->data, skb->data, ctx->copy_size); - dprintk(KERN_ERR "copy %u bytes to dataRing[%u]\n", + dev_dbg(&adapter->netdev->dev, + "copy %u bytes to dataRing[%u]\n", ctx->copy_size, tq->tx_ring.next2fill); return 1; @@ -808,7 +813,8 @@ vmxnet3_tq_xmit(struct sk_buff *skb, struct vmxnet3_tx_queue *tq, if (count > vmxnet3_cmd_ring_desc_avail(&tq->tx_ring)) { tq->stats.tx_ring_full++; - dprintk(KERN_ERR "tx queue stopped on %s, next2comp %u" + dev_dbg(&adapter->netdev->dev, + "tx queue stopped on %s, next2comp %u" " next2fill %u\n", adapter->netdev->name, tq->tx_ring.next2comp, tq->tx_ring.next2fill); @@ -853,7 +859,8 @@ vmxnet3_tq_xmit(struct sk_buff *skb, struct vmxnet3_tx_queue *tq, /* finally flips the GEN bit of the SOP desc */ gdesc->dword[2] ^= VMXNET3_TXD_GEN; - dprintk(KERN_ERR "txd[%u]: SOP 0x%Lx 0x%x 0x%x\n", + dev_dbg(&adapter->netdev->dev, + "txd[%u]: SOP 0x%Lx 0x%x 0x%x\n", (u32)((union Vmxnet3_GenericDesc *)ctx.sop_txd - tq->tx_ring.base), gdesc->txd.addr, gdesc->dword[2], gdesc->dword[3]); @@ -990,7 +997,8 @@ vmxnet3_rq_rx_complete(struct vmxnet3_rx_queue *rq, if (unlikely(rcd->len == 0)) { /* Pretend the rx buffer is skipped. */ BUG_ON(!(rcd->sop && rcd->eop)); - dprintk(KERN_ERR "rxRing[%u][%u] 0 length\n", + dev_dbg(&adapter->netdev->dev, + "rxRing[%u][%u] 0 length\n", ring_idx, idx); goto rcd_done; } @@ -1683,7 +1691,8 @@ vmxnet3_activate_dev(struct vmxnet3_adapter *adapter) int err; u32 ret; - dprintk(KERN_ERR "%s: skb_buf_size %d, rx_buf_per_pkt %d, ring sizes" + dev_dbg(&adapter->netdev->dev, + "%s: skb_buf_size %d, rx_buf_per_pkt %d, ring sizes" " %u %u %u\n", adapter->netdev->name, adapter->skb_buf_size, adapter->rx_buf_per_pkt, adapter->tx_queue.tx_ring.size, adapter->rx_queue.rx_ring[0].size, diff --git a/drivers/net/vmxnet3/vmxnet3_int.h b/drivers/net/vmxnet3/vmxnet3_int.h index 6bb91576e999..3c0d70d58111 100644 --- a/drivers/net/vmxnet3/vmxnet3_int.h +++ b/drivers/net/vmxnet3/vmxnet3_int.h @@ -30,6 +30,7 @@ #include #include #include +#include #include #include #include @@ -59,7 +60,6 @@ #include #include #include -#include #include "vmxnet3_defs.h" -- cgit v1.2.3-59-g8ed1b From 16dd18b0837dee46f1a6b0c01830c5f2b7187266 Mon Sep 17 00:00:00 2001 From: Thomas Chou Date: Wed, 7 Oct 2009 14:16:42 +0000 Subject: ethoc: inline regs access Signed-off-by: Thomas Chou Signed-off-by: David S. Miller --- drivers/net/ethoc.c | 19 ++++++++++--------- 1 file changed, 10 insertions(+), 9 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethoc.c b/drivers/net/ethoc.c index 1d338c6f5314..88a1c5223069 100644 --- a/drivers/net/ethoc.c +++ b/drivers/net/ethoc.c @@ -222,24 +222,25 @@ struct ethoc_bd { u32 addr; }; -static u32 ethoc_read(struct ethoc *dev, loff_t offset) +static inline u32 ethoc_read(struct ethoc *dev, loff_t offset) { return ioread32(dev->iobase + offset); } -static void ethoc_write(struct ethoc *dev, loff_t offset, u32 data) +static inline void ethoc_write(struct ethoc *dev, loff_t offset, u32 data) { iowrite32(data, dev->iobase + offset); } -static void ethoc_read_bd(struct ethoc *dev, int index, struct ethoc_bd *bd) +static inline void ethoc_read_bd(struct ethoc *dev, int index, + struct ethoc_bd *bd) { loff_t offset = ETHOC_BD_BASE + (index * sizeof(struct ethoc_bd)); bd->stat = ethoc_read(dev, offset + 0); bd->addr = ethoc_read(dev, offset + 4); } -static void ethoc_write_bd(struct ethoc *dev, int index, +static inline void ethoc_write_bd(struct ethoc *dev, int index, const struct ethoc_bd *bd) { loff_t offset = ETHOC_BD_BASE + (index * sizeof(struct ethoc_bd)); @@ -247,33 +248,33 @@ static void ethoc_write_bd(struct ethoc *dev, int index, ethoc_write(dev, offset + 4, bd->addr); } -static void ethoc_enable_irq(struct ethoc *dev, u32 mask) +static inline void ethoc_enable_irq(struct ethoc *dev, u32 mask) { u32 imask = ethoc_read(dev, INT_MASK); imask |= mask; ethoc_write(dev, INT_MASK, imask); } -static void ethoc_disable_irq(struct ethoc *dev, u32 mask) +static inline void ethoc_disable_irq(struct ethoc *dev, u32 mask) { u32 imask = ethoc_read(dev, INT_MASK); imask &= ~mask; ethoc_write(dev, INT_MASK, imask); } -static void ethoc_ack_irq(struct ethoc *dev, u32 mask) +static inline void ethoc_ack_irq(struct ethoc *dev, u32 mask) { ethoc_write(dev, INT_SOURCE, mask); } -static void ethoc_enable_rx_and_tx(struct ethoc *dev) +static inline void ethoc_enable_rx_and_tx(struct ethoc *dev) { u32 mode = ethoc_read(dev, MODER); mode |= MODER_RXEN | MODER_TXEN; ethoc_write(dev, MODER, mode); } -static void ethoc_disable_rx_and_tx(struct ethoc *dev) +static inline void ethoc_disable_rx_and_tx(struct ethoc *dev) { u32 mode = ethoc_read(dev, MODER); mode &= ~(MODER_RXEN | MODER_TXEN); -- cgit v1.2.3-59-g8ed1b From 50c54a57dfbd392e17f1473717b8e125afcb01a3 Mon Sep 17 00:00:00 2001 From: Thomas Chou Date: Wed, 7 Oct 2009 14:16:43 +0000 Subject: ethoc: clear only pending irqs This patch fixed the problem of dropped packets due to lost of interrupt requests. We should only clear what was pending at the moment we read the irq source reg. Signed-off-by: Thomas Chou Signed-off-by: David S. Miller --- drivers/net/ethoc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/ethoc.c b/drivers/net/ethoc.c index 88a1c5223069..590473afb3dc 100644 --- a/drivers/net/ethoc.c +++ b/drivers/net/ethoc.c @@ -508,7 +508,7 @@ static irqreturn_t ethoc_interrupt(int irq, void *dev_id) return IRQ_NONE; } - ethoc_ack_irq(priv, INT_MASK_ALL); + ethoc_ack_irq(priv, pending); if (pending & INT_MASK_BUSY) { dev_err(&dev->dev, "packet dropped\n"); -- cgit v1.2.3-59-g8ed1b From 78abcb13dd573f80d76d12007b36200a86f1e494 Mon Sep 17 00:00:00 2001 From: Steven King Date: Tue, 20 Oct 2009 18:51:37 -0700 Subject: net: fix section mismatch in fec.c fec_enet_init is called by both fec_probe and fec_resume, so it shouldn't be marked as __init. Signed-off-by: Steven King Signed-off-by: David S. Miller --- drivers/net/fec.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/fec.c b/drivers/net/fec.c index 29234380e6c6..16a1d58419d9 100644 --- a/drivers/net/fec.c +++ b/drivers/net/fec.c @@ -1654,7 +1654,7 @@ static const struct net_device_ops fec_netdev_ops = { * * index is only used in legacy code */ -int __init fec_enet_init(struct net_device *dev, int index) +static int fec_enet_init(struct net_device *dev, int index) { struct fec_enet_private *fep = netdev_priv(dev); struct bufdesc *cbd_base; -- cgit v1.2.3-59-g8ed1b From 57dada6819160eb08f2945fb847045f173d3218d Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Mon, 19 Oct 2009 23:49:03 +0000 Subject: KS8851: Add soft reset at probe time Issue a full soft reset at probe time. This was reported by Doong Ping of Micrel, but no explanation of why this is necessary or what bug it is fixing. Add it as it does not seem to hurt the current driver and ensures that the device is in a known state when we start setting it up. Signed-off-by: Ben Dooks Signed-off-by: David S. Miller --- drivers/net/ks8851.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers/net') diff --git a/drivers/net/ks8851.c b/drivers/net/ks8851.c index 237835864357..18b17a1deb11 100644 --- a/drivers/net/ks8851.c +++ b/drivers/net/ks8851.c @@ -1239,6 +1239,9 @@ static int __devinit ks8851_probe(struct spi_device *spi) ndev->netdev_ops = &ks8851_netdev_ops; ndev->irq = spi->irq; + /* issue a global soft reset to reset the device. */ + ks8851_soft_reset(ks, GRR_GSR); + /* simple check for a valid chip being connected to the bus */ if ((ks8851_rdreg16(ks, KS_CIDER) & ~CIDER_REV_MASK) != CIDER_ID) { -- cgit v1.2.3-59-g8ed1b From 160d0fadaf7ce20e5bad26c8a955504b93c6a5ba Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Mon, 19 Oct 2009 23:49:04 +0000 Subject: KS8851: Fix MAC address write order The MAC address register was being written in the wrong order, so add a new address macro to convert mac-address byte to register address and a ks8851_wrreg8() function to write each byte without having to worry about any difficult byte swapping. Fixes a bug reported by Doong, Ping of Micrel. Signed-off-by: Ben Dooks Signed-off-by: David S. Miller --- drivers/net/ks8851.c | 37 +++++++++++++++++++++++++++++++++---- drivers/net/ks8851.h | 1 + 2 files changed, 34 insertions(+), 4 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ks8851.c b/drivers/net/ks8851.c index 18b17a1deb11..29fa19a076bd 100644 --- a/drivers/net/ks8851.c +++ b/drivers/net/ks8851.c @@ -170,6 +170,36 @@ static void ks8851_wrreg16(struct ks8851_net *ks, unsigned reg, unsigned val) ks_err(ks, "spi_sync() failed\n"); } +/** + * ks8851_wrreg8 - write 8bit register value to chip + * @ks: The chip state + * @reg: The register address + * @val: The value to write + * + * Issue a write to put the value @val into the register specified in @reg. + */ +static void ks8851_wrreg8(struct ks8851_net *ks, unsigned reg, unsigned val) +{ + struct spi_transfer *xfer = &ks->spi_xfer1; + struct spi_message *msg = &ks->spi_msg1; + __le16 txb[2]; + int ret; + int bit; + + bit = 1 << (reg & 3); + + txb[0] = cpu_to_le16(MK_OP(bit, reg) | KS_SPIOP_WR); + txb[1] = val; + + xfer->tx_buf = txb; + xfer->rx_buf = NULL; + xfer->len = 3; + + ret = spi_sync(ks->spidev, msg); + if (ret < 0) + ks_err(ks, "spi_sync() failed\n"); +} + /** * ks8851_rx_1msg - select whether to use one or two messages for spi read * @ks: The device structure @@ -322,13 +352,12 @@ static void ks8851_soft_reset(struct ks8851_net *ks, unsigned op) static int ks8851_write_mac_addr(struct net_device *dev) { struct ks8851_net *ks = netdev_priv(dev); - u16 *mcp = (u16 *)dev->dev_addr; + int i; mutex_lock(&ks->lock); - ks8851_wrreg16(ks, KS_MARL, mcp[0]); - ks8851_wrreg16(ks, KS_MARM, mcp[1]); - ks8851_wrreg16(ks, KS_MARH, mcp[2]); + for (i = 0; i < ETH_ALEN; i++) + ks8851_wrreg8(ks, KS_MAR(i), dev->dev_addr[i]); mutex_unlock(&ks->lock); diff --git a/drivers/net/ks8851.h b/drivers/net/ks8851.h index 85abe147afbf..f52c312cc356 100644 --- a/drivers/net/ks8851.h +++ b/drivers/net/ks8851.h @@ -16,6 +16,7 @@ #define CCR_32PIN (1 << 0) /* MAC address registers */ +#define KS_MAR(_m) 0x15 - (_m) #define KS_MARL 0x10 #define KS_MARM 0x12 #define KS_MARH 0x14 -- cgit v1.2.3-59-g8ed1b From b6a71bfa00eb110c8a2e38f85572ed361f8bf3a5 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Mon, 19 Oct 2009 23:49:05 +0000 Subject: KS8851: Fix ks8851_set_rx_mode() for IFF_MULTICAST In ks8851_set_rx_mode() the case handling IFF_MULTICAST was also setting the RXCR1_AE bit by accident. This meant that all unicast frames where being accepted by the device. Remove RXCR1_AE from this case. Note, RXCR1_AE was also masking a problem with setting the MAC address properly, so needs to be applied after fixing the MAC write order. Fixes a bug reported by Doong, Ping of Micrel. This version of the patch avoids setting RXCR1_ME for all cases. Signed-off-by: Ben Dooks Signed-off-by: David S. Miller --- drivers/net/ks8851.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/ks8851.c b/drivers/net/ks8851.c index 29fa19a076bd..a23f739d222f 100644 --- a/drivers/net/ks8851.c +++ b/drivers/net/ks8851.c @@ -980,7 +980,7 @@ static void ks8851_set_rx_mode(struct net_device *dev) mcptr = mcptr->next; } - rxctrl.rxcr1 = RXCR1_RXME | RXCR1_RXAE | RXCR1_RXPAFMA; + rxctrl.rxcr1 = RXCR1_RXME | RXCR1_RXPAFMA; } else { /* just accept broadcast / unicast */ rxctrl.rxcr1 = RXCR1_RXPAFMA; -- cgit v1.2.3-59-g8ed1b From 845de8afa66550331dca164ab77fa49de930b699 Mon Sep 17 00:00:00 2001 From: Joyce Yu Date: Wed, 21 Oct 2009 17:21:10 -0700 Subject: niu: VLAN_ETH_HLEN should be used to make sure that the whole MAC header was copied to the head buffer in the Vlan packets case Signed-off-by: Joyce Yu Signed-off-by: David S. Miller --- drivers/net/niu.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/niu.c b/drivers/net/niu.c index f9364d0678f2..d6c7ac68f6ea 100644 --- a/drivers/net/niu.c +++ b/drivers/net/niu.c @@ -3545,7 +3545,7 @@ static int niu_process_rx_pkt(struct napi_struct *napi, struct niu *np, rp->rcr_index = index; skb_reserve(skb, NET_IP_ALIGN); - __pskb_pull_tail(skb, min(len, NIU_RXPULL_MAX)); + __pskb_pull_tail(skb, min(len, VLAN_ETH_HLEN)); rp->rx_packets++; rp->rx_bytes += skb->len; -- cgit v1.2.3-59-g8ed1b From 8bee0a91dd2f472d51dc107288c988ae0a0f371a Mon Sep 17 00:00:00 2001 From: Dhananjay Phadke Date: Wed, 21 Oct 2009 19:39:01 +0000 Subject: netxen: fix i2c init Avoid resetting subsys ID in i2c block. Also remove duplicate check for address tranlsation error. Signed-off-by: Dhananjay Phadke Signed-off-by: David S. Miller --- drivers/net/netxen/netxen_nic_hdr.h | 1 + drivers/net/netxen/netxen_nic_init.c | 8 ++------ 2 files changed, 3 insertions(+), 6 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/netxen/netxen_nic_hdr.h b/drivers/net/netxen/netxen_nic_hdr.h index 7a7177421d7c..1c46da632125 100644 --- a/drivers/net/netxen/netxen_nic_hdr.h +++ b/drivers/net/netxen/netxen_nic_hdr.h @@ -419,6 +419,7 @@ enum { #define NETXEN_CRB_ROMUSB \ NETXEN_PCI_CRB_WINDOW(NETXEN_HW_PX_MAP_CRB_ROMUSB) #define NETXEN_CRB_I2Q NETXEN_PCI_CRB_WINDOW(NETXEN_HW_PX_MAP_CRB_I2Q) +#define NETXEN_CRB_I2C0 NETXEN_PCI_CRB_WINDOW(NETXEN_HW_PX_MAP_CRB_I2C0) #define NETXEN_CRB_SMB NETXEN_PCI_CRB_WINDOW(NETXEN_HW_PX_MAP_CRB_SMB) #define NETXEN_CRB_MAX NETXEN_PCI_CRB_WINDOW(64) diff --git a/drivers/net/netxen/netxen_nic_init.c b/drivers/net/netxen/netxen_nic_init.c index 91c2bc61c8eb..e40b914d6faf 100644 --- a/drivers/net/netxen/netxen_nic_init.c +++ b/drivers/net/netxen/netxen_nic_init.c @@ -531,6 +531,8 @@ int netxen_pinit_from_rom(struct netxen_adapter *adapter, int verbose) continue; if (NX_IS_REVISION_P3(adapter->ahw.revision_id)) { + if (off == (NETXEN_CRB_I2C0 + 0x1c)) + continue; /* do not reset PCI */ if (off == (ROMUSB_GLB + 0xbc)) continue; @@ -553,12 +555,6 @@ int netxen_pinit_from_rom(struct netxen_adapter *adapter, int verbose) continue; } - if (off == NETXEN_ADDR_ERROR) { - printk(KERN_ERR "%s: Err: Unknown addr: 0x%08x\n", - netxen_nic_driver_name, buf[i].addr); - continue; - } - init_delay = 1; /* After writing this register, HW needs time for CRB */ /* to quiet down (else crb_window returns 0xffffffff) */ -- cgit v1.2.3-59-g8ed1b From ff8a306d63a01f15f166039de94c448c76140d1d Mon Sep 17 00:00:00 2001 From: Amit Kumar Salecha Date: Wed, 21 Oct 2009 19:39:02 +0000 Subject: netxen: fix tx timeout handling on firmware hang Clear NX_RESETING bit in netxen_tx_timeout_task() so that the firmware watchdog task can catch need_reset request from tx timeout. Signed-off-by: Amit Kumar Salecha Signed-off-by: Dhananjay Phadke Signed-off-by: David S. Miller --- drivers/net/netxen/netxen_nic_main.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers/net') diff --git a/drivers/net/netxen/netxen_nic_main.c b/drivers/net/netxen/netxen_nic_main.c index 7fc15e9e8adb..0b4a56a8c8d5 100644 --- a/drivers/net/netxen/netxen_nic_main.c +++ b/drivers/net/netxen/netxen_nic_main.c @@ -1919,6 +1919,7 @@ static void netxen_tx_timeout_task(struct work_struct *work) request_reset: adapter->need_fw_reset = 1; + clear_bit(__NX_RESETTING, &adapter->state); } struct net_device_stats *netxen_nic_get_stats(struct net_device *netdev) -- cgit v1.2.3-59-g8ed1b From 0dc6d9cbe7df4d2c3cdf17cd2f78733102b0fea6 Mon Sep 17 00:00:00 2001 From: Dhananjay Phadke Date: Wed, 21 Oct 2009 19:39:03 +0000 Subject: netxen: avoid undue board config check Old code assumed board config version in the flash to be 1. When this will get changed by tools, driver just refuses to attach. This is unnecessary since driver does not have to parse board config structure directly (maintained by firmware). Signed-off-by: Dhananjay Phadke Signed-off-by: David S. Miller --- drivers/net/netxen/netxen_nic_hw.c | 14 ++++---------- 1 file changed, 4 insertions(+), 10 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/netxen/netxen_nic_hw.c b/drivers/net/netxen/netxen_nic_hw.c index 32314000dfcd..3185a98b0917 100644 --- a/drivers/net/netxen/netxen_nic_hw.c +++ b/drivers/net/netxen/netxen_nic_hw.c @@ -1901,22 +1901,16 @@ netxen_setup_hwops(struct netxen_adapter *adapter) int netxen_nic_get_board_info(struct netxen_adapter *adapter) { - int offset, board_type, magic, header_version; + int offset, board_type, magic; struct pci_dev *pdev = adapter->pdev; offset = NX_FW_MAGIC_OFFSET; if (netxen_rom_fast_read(adapter, offset, &magic)) return -EIO; - offset = NX_HDR_VERSION_OFFSET; - if (netxen_rom_fast_read(adapter, offset, &header_version)) - return -EIO; - - if (magic != NETXEN_BDINFO_MAGIC || - header_version != NETXEN_BDINFO_VERSION) { - dev_err(&pdev->dev, - "invalid board config, magic=%08x, version=%08x\n", - magic, header_version); + if (magic != NETXEN_BDINFO_MAGIC) { + dev_err(&pdev->dev, "invalid board config, magic=%08x\n", + magic); return -EIO; } -- cgit v1.2.3-59-g8ed1b From 74eee2e8d08048c847d1998c686e12a477ff939a Mon Sep 17 00:00:00 2001 From: Bruce Allan Date: Thu, 22 Oct 2009 21:22:18 -0700 Subject: e1000e: reset the PHY on 82577/82578 when going to Sx The PHY on 82577/82578 parts needs a soft reset when transitioning to Sx state in order for the PHY write which disables gigabit speed to take effect. Gigabit speed must be disabled in order for the PHY writes to registers on page 800 (the wakeup control registers) to work as expected otherwise the system might not wake via WoL. Signed-off-by: Bruce Allan Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller --- drivers/net/e1000e/ich8lan.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/e1000e/ich8lan.c b/drivers/net/e1000e/ich8lan.c index 99df2abf82a9..aa0ab0eb8c7d 100644 --- a/drivers/net/e1000e/ich8lan.c +++ b/drivers/net/e1000e/ich8lan.c @@ -2843,9 +2843,8 @@ void e1000e_disable_gig_wol_ich8lan(struct e1000_hw *hw) E1000_PHY_CTRL_GBE_DISABLE; ew32(PHY_CTRL, phy_ctrl); - /* Workaround SWFLAG unexpectedly set during S0->Sx */ if (hw->mac.type == e1000_pchlan) - udelay(500); + e1000_phy_hw_reset_ich8lan(hw); default: break; } -- cgit v1.2.3-59-g8ed1b From 196f17eb1754381cf4c68c117a5ddd96cccc1366 Mon Sep 17 00:00:00 2001 From: Brice Goglin Date: Thu, 22 Oct 2009 21:43:43 -0700 Subject: myri10ge: improve port type reporting in ethtool Improve the reporting of myri10ge port type in ethtool, and update for new boards. Signed-off-by: Brice Goglin Signed-off-by: Andrew Gallatin Signed-off-by: David S. Miller --- drivers/net/myri10ge/myri10ge.c | 17 ++++++++++++++--- 1 file changed, 14 insertions(+), 3 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/myri10ge/myri10ge.c b/drivers/net/myri10ge/myri10ge.c index 6930c87f362e..f3624517cb0e 100644 --- a/drivers/net/myri10ge/myri10ge.c +++ b/drivers/net/myri10ge/myri10ge.c @@ -75,7 +75,7 @@ #include "myri10ge_mcp.h" #include "myri10ge_mcp_gen_header.h" -#define MYRI10GE_VERSION_STR "1.5.0-1.432" +#define MYRI10GE_VERSION_STR "1.5.1-1.451" MODULE_DESCRIPTION("Myricom 10G driver (10GbE)"); MODULE_AUTHOR("Maintainer: help@myri.com"); @@ -1624,10 +1624,21 @@ myri10ge_get_settings(struct net_device *netdev, struct ethtool_cmd *cmd) return 0; } } - if (*ptr == 'R' || *ptr == 'Q') { - /* We've found either an XFP or quad ribbon fiber */ + if (*ptr == '2') + ptr++; + if (*ptr == 'R' || *ptr == 'Q' || *ptr == 'S') { + /* We've found either an XFP, quad ribbon fiber, or SFP+ */ cmd->port = PORT_FIBRE; + cmd->supported |= SUPPORTED_FIBRE; + cmd->advertising |= ADVERTISED_FIBRE; + } else { + cmd->port = PORT_OTHER; } + if (*ptr == 'R' || *ptr == 'S') + cmd->transceiver = XCVR_EXTERNAL; + else + cmd->transceiver = XCVR_INTERNAL; + return 0; } -- cgit v1.2.3-59-g8ed1b From bc36b4285136bcc8dd43e91ffe34df6a52a0cfaf Mon Sep 17 00:00:00 2001 From: Manuel Lauss Date: Sat, 17 Oct 2009 02:00:07 +0000 Subject: net: au1000_eth: add missing capability.h fixes the following build failure: CC drivers/net/au1000_eth.o /drivers/net/au1000_eth.c: In function 'au1000_set_settings': /drivers/net/au1000_eth.c:623: error: implicit declaration of function 'capable' /drivers/net/au1000_eth.c:623: error: 'CAP_NET_ADMIN' undeclared (first use in this function) /drivers/net/au1000_eth.c:623: error: (Each undeclared identifier is reported only once /drivers/net/au1000_eth.c:623: error: for each function it appears in. Signed-off-by: Manuel Lauss Signed-off-by: David S. Miller --- drivers/net/au1000_eth.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers/net') diff --git a/drivers/net/au1000_eth.c b/drivers/net/au1000_eth.c index 04f63c77071d..ce6f1ac25df8 100644 --- a/drivers/net/au1000_eth.c +++ b/drivers/net/au1000_eth.c @@ -34,6 +34,7 @@ * * */ +#include #include #include #include -- cgit v1.2.3-59-g8ed1b From db519144243de6b17ff0c56c26f06059743110a7 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Tue, 20 Oct 2009 02:35:50 +0000 Subject: ifb: should not use __dev_get_by_index() without locks At this point (ri_tasklet()), RTNL or dev_base_lock are not held, we must use dev_get_by_index() instead of __dev_get_by_index() Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller --- drivers/net/ifb.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/ifb.c b/drivers/net/ifb.c index 801f088c134f..030913f8bd26 100644 --- a/drivers/net/ifb.c +++ b/drivers/net/ifb.c @@ -98,12 +98,13 @@ static void ri_tasklet(unsigned long dev) stats->tx_packets++; stats->tx_bytes +=skb->len; - skb->dev = __dev_get_by_index(&init_net, skb->iif); + skb->dev = dev_get_by_index(&init_net, skb->iif); if (!skb->dev) { dev_kfree_skb(skb); stats->tx_dropped++; break; } + dev_put(skb->dev); skb->iif = _dev->ifindex; if (from & AT_EGRESS) { -- cgit v1.2.3-59-g8ed1b From 05af2142d09845de2f4ae34181c72addd72d5ef9 Mon Sep 17 00:00:00 2001 From: Simon Wunderlich Date: Sat, 24 Oct 2009 06:47:33 -0700 Subject: r8169: fix Ethernet Hangup for RTL8110SC rev d The 8110SC rev d chip on our board shows a regression which the 8110SB chip did not have. When inbound traffic is overflowing the receive descriptor queue, "holes" in the ring buffer may occur which lead to a hangup until the buffer is filled again. The packets are than completely processed, but the ring remains porous and no packets are processed until the next overflow. Setting the interface down and up can fix the problem temporary from userspace. For some reason we don't know, this behaviour is not occuring if the RxVlan bit for hardware VLAN untagging is set. There is another "Work around for AMD plateform" in the current code which checks the VLAN status word in receive descriptors, but does never come to effect when hardware VLAN support is enabled. We assume that this is a bug in the chip. The following patch fixes the problem. Without the patch we could reproduce the hang within minutes (given other devices also generating lots of interrupts), without we couldn't reproduce within a few days of long term testing. This version contains minor style adjustments and is sent with mutt which will hopefully not destroy the formatting again. Signed-off-by: Bernhard Schmidt Signed-off-by: Simon Wunderlich Acked-by: Francois Romieu Signed-off-by: David S. Miller --- drivers/net/r8169.c | 13 ++++++++++++- 1 file changed, 12 insertions(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/r8169.c b/drivers/net/r8169.c index 83c47d95c3aa..f98ef523f525 100644 --- a/drivers/net/r8169.c +++ b/drivers/net/r8169.c @@ -1029,7 +1029,10 @@ static void rtl8169_vlan_rx_register(struct net_device *dev, spin_lock_irqsave(&tp->lock, flags); tp->vlgrp = grp; - if (tp->vlgrp) + /* + * Do not disable RxVlan on 8110SCd. + */ + if (tp->vlgrp || (tp->mac_version == RTL_GIGA_MAC_VER_05)) tp->cp_cmd |= RxVlan; else tp->cp_cmd &= ~RxVlan; @@ -3197,6 +3200,14 @@ rtl8169_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) } rtl8169_init_phy(dev, tp); + + /* + * Pretend we are using VLANs; This bypasses a nasty bug where + * Interrupts stop flowing on high load on 8110SCd controllers. + */ + if (tp->mac_version == RTL_GIGA_MAC_VER_05) + RTL_W16(CPlusCmd, RTL_R16(CPlusCmd) | RxVlan); + device_set_wakeup_enable(&pdev->dev, tp->features & RTL_FEATURE_WOL); out: -- cgit v1.2.3-59-g8ed1b From 62e20a624b18e135870ae781087bc63fdda829ba Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Sat, 24 Oct 2009 06:53:07 -0700 Subject: DM9000: Fix revision ID for DM9000B The DM9000B revision ID is 0x1A, not 0x1B as set in the curernt dm9000.h header. Fix bug reported by Paolo Zebelloni. Signed-off-by: Ben Dooks Signed-off-by: Simtec Linux Team Signed-off-by: David S. Miller --- drivers/net/dm9000.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/dm9000.h b/drivers/net/dm9000.h index 80817c2edfb3..fb1c924d79b4 100644 --- a/drivers/net/dm9000.h +++ b/drivers/net/dm9000.h @@ -50,7 +50,7 @@ #define DM9000_RCSR 0x32 #define CHIPR_DM9000A 0x19 -#define CHIPR_DM9000B 0x1B +#define CHIPR_DM9000B 0x1A #define DM9000_MRCMDX 0xF0 #define DM9000_MRCMD 0xF2 -- cgit v1.2.3-59-g8ed1b From d3da68310a2cf934c2ea8a99a519d8b1ccca4c56 Mon Sep 17 00:00:00 2001 From: Jasper Spaans Date: Fri, 23 Oct 2009 04:08:46 +0000 Subject: bonding: Modify hash transmit policies to use the packet's source MAC address Modify bonding hash transmit policies to use the psource MAC address of the packet instead of the MAC address configured for the bonding device. The old sitation conflicts with the documentation. Signed-off-by: Jasper Spaans Acked-by: Eric Dumazet Signed-off-by: Jay Vosburgh Signed-off-by: David S. Miller --- drivers/net/bonding/bond_main.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c index 69c5b15e22da..3f05267b2cfd 100644 --- a/drivers/net/bonding/bond_main.c +++ b/drivers/net/bonding/bond_main.c @@ -3665,10 +3665,10 @@ static int bond_xmit_hash_policy_l23(struct sk_buff *skb, if (skb->protocol == htons(ETH_P_IP)) { return ((ntohl(iph->saddr ^ iph->daddr) & 0xffff) ^ - (data->h_dest[5] ^ bond_dev->dev_addr[5])) % count; + (data->h_dest[5] ^ data->h_source[5])) % count; } - return (data->h_dest[5] ^ bond_dev->dev_addr[5]) % count; + return (data->h_dest[5] ^ data->h_source[5]) % count; } /* @@ -3695,7 +3695,7 @@ static int bond_xmit_hash_policy_l34(struct sk_buff *skb, } - return (data->h_dest[5] ^ bond_dev->dev_addr[5]) % count; + return (data->h_dest[5] ^ data->h_source[5]) % count; } /* @@ -3706,7 +3706,7 @@ static int bond_xmit_hash_policy_l2(struct sk_buff *skb, { struct ethhdr *data = (struct ethhdr *)skb->data; - return (data->h_dest[5] ^ bond_dev->dev_addr[5]) % count; + return (data->h_dest[5] ^ data->h_source[5]) % count; } /*-------------------------- Device entry points ----------------------------*/ -- cgit v1.2.3-59-g8ed1b From 6d9f4fc420571ab67c962ef0d94449127218f66e Mon Sep 17 00:00:00 2001 From: Alexander Duyck Date: Mon, 26 Oct 2009 11:31:47 +0000 Subject: igb: fix memory leak when setting ring size while interface is down Changing ring sizes while the interface was down was causing a double allocation of the receive and transmit rings. This issue is amplified when there are multiple rings enabled. To prevent this we need to add an additional check which will just update the ring counts when the interface is not up and skip the allocation steps. Signed-off-by: Alexander Duyck Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller --- drivers/net/igb/igb_ethtool.c | 35 ++++++++++++++++++++++------------- 1 file changed, 22 insertions(+), 13 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/igb/igb_ethtool.c b/drivers/net/igb/igb_ethtool.c index d004c359244c..aab3d971af51 100644 --- a/drivers/net/igb/igb_ethtool.c +++ b/drivers/net/igb/igb_ethtool.c @@ -731,7 +731,7 @@ static int igb_set_ringparam(struct net_device *netdev, { struct igb_adapter *adapter = netdev_priv(netdev); struct igb_ring *temp_ring; - int i, err; + int i, err = 0; u32 new_rx_count, new_tx_count; if ((ring->rx_mini_pending) || (ring->rx_jumbo_pending)) @@ -751,18 +751,30 @@ static int igb_set_ringparam(struct net_device *netdev, return 0; } + while (test_and_set_bit(__IGB_RESETTING, &adapter->state)) + msleep(1); + + if (!netif_running(adapter->netdev)) { + for (i = 0; i < adapter->num_tx_queues; i++) + adapter->tx_ring[i].count = new_tx_count; + for (i = 0; i < adapter->num_rx_queues; i++) + adapter->rx_ring[i].count = new_rx_count; + adapter->tx_ring_count = new_tx_count; + adapter->rx_ring_count = new_rx_count; + goto clear_reset; + } + if (adapter->num_tx_queues > adapter->num_rx_queues) temp_ring = vmalloc(adapter->num_tx_queues * sizeof(struct igb_ring)); else temp_ring = vmalloc(adapter->num_rx_queues * sizeof(struct igb_ring)); - if (!temp_ring) - return -ENOMEM; - while (test_and_set_bit(__IGB_RESETTING, &adapter->state)) - msleep(1); + if (!temp_ring) { + err = -ENOMEM; + goto clear_reset; + } - if (netif_running(adapter->netdev)) - igb_down(adapter); + igb_down(adapter); /* * We can't just free everything and then setup again, @@ -819,14 +831,11 @@ static int igb_set_ringparam(struct net_device *netdev, adapter->rx_ring_count = new_rx_count; } - - err = 0; err_setup: - if (netif_running(adapter->netdev)) - igb_up(adapter); - - clear_bit(__IGB_RESETTING, &adapter->state); + igb_up(adapter); vfree(temp_ring); +clear_reset: + clear_bit(__IGB_RESETTING, &adapter->state); return err; } -- cgit v1.2.3-59-g8ed1b From 759884b4d4cbafcd3f222b29cd6e0c2cbc542d2b Mon Sep 17 00:00:00 2001 From: Alexander Duyck Date: Mon, 26 Oct 2009 11:32:05 +0000 Subject: ixgbe: fix memory leak when resizing rings while interface is down This patch resolves a memory leak that occurs when you resize the rings via the ethtool -G option while the interface is down. Signed-off-by: Alexander Duyck Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller --- drivers/net/ixgbe/ixgbe_ethtool.c | 22 +++++++++++++--------- 1 file changed, 13 insertions(+), 9 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ixgbe/ixgbe_ethtool.c b/drivers/net/ixgbe/ixgbe_ethtool.c index fa314cb005a4..856c18c207f3 100644 --- a/drivers/net/ixgbe/ixgbe_ethtool.c +++ b/drivers/net/ixgbe/ixgbe_ethtool.c @@ -798,7 +798,7 @@ static int ixgbe_set_ringparam(struct net_device *netdev, { struct ixgbe_adapter *adapter = netdev_priv(netdev); struct ixgbe_ring *temp_tx_ring, *temp_rx_ring; - int i, err; + int i, err = 0; u32 new_rx_count, new_tx_count; bool need_update = false; @@ -822,6 +822,16 @@ static int ixgbe_set_ringparam(struct net_device *netdev, while (test_and_set_bit(__IXGBE_RESETTING, &adapter->state)) msleep(1); + if (!netif_running(adapter->netdev)) { + for (i = 0; i < adapter->num_tx_queues; i++) + adapter->tx_ring[i].count = new_tx_count; + for (i = 0; i < adapter->num_rx_queues; i++) + adapter->rx_ring[i].count = new_rx_count; + adapter->tx_ring_count = new_tx_count; + adapter->rx_ring_count = new_rx_count; + goto err_setup; + } + temp_tx_ring = kcalloc(adapter->num_tx_queues, sizeof(struct ixgbe_ring), GFP_KERNEL); if (!temp_tx_ring) { @@ -879,8 +889,7 @@ static int ixgbe_set_ringparam(struct net_device *netdev, /* if rings need to be updated, here's the place to do it in one shot */ if (need_update) { - if (netif_running(netdev)) - ixgbe_down(adapter); + ixgbe_down(adapter); /* tx */ if (new_tx_count != adapter->tx_ring_count) { @@ -897,13 +906,8 @@ static int ixgbe_set_ringparam(struct net_device *netdev, temp_rx_ring = NULL; adapter->rx_ring_count = new_rx_count; } - } - - /* success! */ - err = 0; - if (netif_running(netdev)) ixgbe_up(adapter); - + } err_setup: clear_bit(__IXGBE_RESETTING, &adapter->state); return err; -- cgit v1.2.3-59-g8ed1b From 39305965f31e080d6ed96e0ff51ed11e7639d52e Mon Sep 17 00:00:00 2001 From: Alexander Duyck Date: Mon, 26 Oct 2009 11:32:25 +0000 Subject: igbvf: fix memory leak when ring size changed while interface down This patch resolves a memory leak which occurs while changing the ring size while the interface is down. Signed-off-by: Alexander Duyck Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller --- drivers/net/igbvf/ethtool.c | 30 +++++++++++++++++------------- 1 file changed, 17 insertions(+), 13 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/igbvf/ethtool.c b/drivers/net/igbvf/ethtool.c index ee17a097d1ca..c68265bd0d1a 100644 --- a/drivers/net/igbvf/ethtool.c +++ b/drivers/net/igbvf/ethtool.c @@ -279,7 +279,7 @@ static int igbvf_set_ringparam(struct net_device *netdev, { struct igbvf_adapter *adapter = netdev_priv(netdev); struct igbvf_ring *temp_ring; - int err; + int err = 0; u32 new_rx_count, new_tx_count; if ((ring->rx_mini_pending) || (ring->rx_jumbo_pending)) @@ -299,15 +299,22 @@ static int igbvf_set_ringparam(struct net_device *netdev, return 0; } - temp_ring = vmalloc(sizeof(struct igbvf_ring)); - if (!temp_ring) - return -ENOMEM; - while (test_and_set_bit(__IGBVF_RESETTING, &adapter->state)) msleep(1); - if (netif_running(adapter->netdev)) - igbvf_down(adapter); + if (!netif_running(adapter->netdev)) { + adapter->tx_ring->count = new_tx_count; + adapter->rx_ring->count = new_rx_count; + goto clear_reset; + } + + temp_ring = vmalloc(sizeof(struct igbvf_ring)); + if (!temp_ring) { + err = -ENOMEM; + goto clear_reset; + } + + igbvf_down(adapter); /* * We can't just free everything and then setup again, @@ -339,14 +346,11 @@ static int igbvf_set_ringparam(struct net_device *netdev, memcpy(adapter->rx_ring, temp_ring,sizeof(struct igbvf_ring)); } - - err = 0; err_setup: - if (netif_running(adapter->netdev)) - igbvf_up(adapter); - - clear_bit(__IGBVF_RESETTING, &adapter->state); + igbvf_up(adapter); vfree(temp_ring); +clear_reset: + clear_bit(__IGBVF_RESETTING, &adapter->state); return err; } -- cgit v1.2.3-59-g8ed1b From db2932ecf8dc07f65b410e921f96c5c51170c0ae Mon Sep 17 00:00:00 2001 From: Bruce Allan Date: Mon, 26 Oct 2009 11:22:47 +0000 Subject: e1000e: clear PHY wakeup bit after LCD reset on 82577/82578 Performing a dummy read of the PHY Wakeup Control (WUC) register clears the wakeup enable bit set by an PHY reset. If this bit remains set, link problems may occur. Signed-off-by: Bruce Allan Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller --- drivers/net/e1000e/ich8lan.c | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/e1000e/ich8lan.c b/drivers/net/e1000e/ich8lan.c index aa0ab0eb8c7d..ead66510e22f 100644 --- a/drivers/net/e1000e/ich8lan.c +++ b/drivers/net/e1000e/ich8lan.c @@ -844,7 +844,7 @@ static s32 e1000_phy_hw_reset_ich8lan(struct e1000_hw *hw) u32 i; u32 data, cnf_size, cnf_base_addr, sw_cfg_mask; s32 ret_val; - u16 word_addr, reg_data, reg_addr, phy_page = 0; + u16 reg, word_addr, reg_data, reg_addr, phy_page = 0; ret_val = e1000e_phy_hw_reset_generic(hw); if (ret_val) @@ -859,6 +859,10 @@ static s32 e1000_phy_hw_reset_ich8lan(struct e1000_hw *hw) return ret_val; } + /* Dummy read to clear the phy wakeup bit after lcd reset */ + if (hw->mac.type == e1000_pchlan) + e1e_rphy(hw, BM_WUC, ®); + /* * Initialize the PHY from the NVM on ICH platforms. This * is needed due to an issue where the NVM configuration is @@ -2229,6 +2233,7 @@ static s32 e1000_get_bus_info_ich8lan(struct e1000_hw *hw) **/ static s32 e1000_reset_hw_ich8lan(struct e1000_hw *hw) { + u16 reg; u32 ctrl, icr, kab; s32 ret_val; @@ -2304,6 +2309,9 @@ static s32 e1000_reset_hw_ich8lan(struct e1000_hw *hw) hw_dbg(hw, "Auto Read Done did not complete\n"); } } + /* Dummy read to clear the phy wakeup bit after lcd reset */ + if (hw->mac.type == e1000_pchlan) + e1e_rphy(hw, BM_WUC, ®); /* * For PCH, this write will make sure that any noise -- cgit v1.2.3-59-g8ed1b From 53ac5a887519f0c3fc94a6acdfc22aa4e97f64f7 Mon Sep 17 00:00:00 2001 From: Bruce Allan Date: Mon, 26 Oct 2009 11:23:06 +0000 Subject: e1000e: increase swflag acquisition timeout for ICHx/PCH In some conditions (e.g. when AMT is enabled on the system), it is possible to take an extended period of time to for the driver to acquire the sw/fw/hw hardware semaphore used to protect against concurrent access of a shared resource (e.g. PHY registers). This could cause PHY registers to not get configured properly resulting in link issues. Signed-off-by: Bruce Allan Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller --- drivers/net/e1000e/ich8lan.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/e1000e/ich8lan.c b/drivers/net/e1000e/ich8lan.c index ead66510e22f..fb2222d60a79 100644 --- a/drivers/net/e1000e/ich8lan.c +++ b/drivers/net/e1000e/ich8lan.c @@ -122,6 +122,8 @@ #define HV_LED_CONFIG PHY_REG(768, 30) /* LED Configuration */ +#define SW_FLAG_TIMEOUT 1000 /* SW Semaphore flag timeout in milliseconds */ + /* ICH GbE Flash Hardware Sequencing Flash Status Register bit breakdown */ /* Offset 04h HSFSTS */ union ich8_hws_flash_status { @@ -599,7 +601,7 @@ static s32 e1000_acquire_swflag_ich8lan(struct e1000_hw *hw) goto out; } - timeout = PHY_CFG_TIMEOUT * 2; + timeout = SW_FLAG_TIMEOUT; extcnf_ctrl |= E1000_EXTCNF_CTRL_SWFLAG; ew32(EXTCNF_CTRL, extcnf_ctrl); -- cgit v1.2.3-59-g8ed1b From fa2ce13ca7a415332181adf2eb06d39e8e5054f7 Mon Sep 17 00:00:00 2001 From: Bruce Allan Date: Mon, 26 Oct 2009 11:23:25 +0000 Subject: e1000e: 82577/82578 requires a different method to configure LPLU Unlike previous ICHx-based parts, the PCH-based parts (82577/82578) require LPLU (Low Power Link Up, or "reverse auto-negotiation") to be configured in the PHY rather than the MAC. Signed-off-by: Bruce Allan Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller --- drivers/net/e1000e/ich8lan.c | 40 ++++++++++++++++++++++++++++++++++++++++ 1 file changed, 40 insertions(+) (limited to 'drivers/net') diff --git a/drivers/net/e1000e/ich8lan.c b/drivers/net/e1000e/ich8lan.c index fb2222d60a79..2451dc8aef70 100644 --- a/drivers/net/e1000e/ich8lan.c +++ b/drivers/net/e1000e/ich8lan.c @@ -124,6 +124,11 @@ #define SW_FLAG_TIMEOUT 1000 /* SW Semaphore flag timeout in milliseconds */ +/* OEM Bits Phy Register */ +#define HV_OEM_BITS PHY_REG(768, 25) +#define HV_OEM_BITS_LPLU 0x0004 /* Low Power Link Up */ +#define HV_OEM_BITS_RESTART_AN 0x0400 /* Restart Auto-negotiation */ + /* ICH GbE Flash Hardware Sequencing Flash Status Register bit breakdown */ /* Offset 04h HSFSTS */ union ich8_hws_flash_status { @@ -202,6 +207,7 @@ static s32 e1000_setup_led_pchlan(struct e1000_hw *hw); static s32 e1000_cleanup_led_pchlan(struct e1000_hw *hw); static s32 e1000_led_on_pchlan(struct e1000_hw *hw); static s32 e1000_led_off_pchlan(struct e1000_hw *hw); +static s32 e1000_set_lplu_state_pchlan(struct e1000_hw *hw, bool active); static inline u16 __er16flash(struct e1000_hw *hw, unsigned long reg) { @@ -244,6 +250,8 @@ static s32 e1000_init_phy_params_pchlan(struct e1000_hw *hw) phy->ops.check_polarity = e1000_check_polarity_ife_ich8lan; phy->ops.read_phy_reg = e1000_read_phy_reg_hv; + phy->ops.set_d0_lplu_state = e1000_set_lplu_state_pchlan; + phy->ops.set_d3_lplu_state = e1000_set_lplu_state_pchlan; phy->ops.write_phy_reg = e1000_write_phy_reg_hv; phy->autoneg_mask = AUTONEG_ADVERTISE_SPEED_DEFAULT; @@ -1059,6 +1067,38 @@ static s32 e1000_check_polarity_ife_ich8lan(struct e1000_hw *hw) return ret_val; } +/** + * e1000_set_lplu_state_pchlan - Set Low Power Link Up state + * @hw: pointer to the HW structure + * @active: true to enable LPLU, false to disable + * + * Sets the LPLU state according to the active flag. For PCH, if OEM write + * bit are disabled in the NVM, writing the LPLU bits in the MAC will not set + * the phy speed. This function will manually set the LPLU bit and restart + * auto-neg as hw would do. D3 and D0 LPLU will call the same function + * since it configures the same bit. + **/ +static s32 e1000_set_lplu_state_pchlan(struct e1000_hw *hw, bool active) +{ + s32 ret_val = 0; + u16 oem_reg; + + ret_val = e1e_rphy(hw, HV_OEM_BITS, &oem_reg); + if (ret_val) + goto out; + + if (active) + oem_reg |= HV_OEM_BITS_LPLU; + else + oem_reg &= ~HV_OEM_BITS_LPLU; + + oem_reg |= HV_OEM_BITS_RESTART_AN; + ret_val = e1e_wphy(hw, HV_OEM_BITS, oem_reg); + +out: + return ret_val; +} + /** * e1000_set_d0_lplu_state_ich8lan - Set Low Power Linkup D0 state * @hw: pointer to the HW structure -- cgit v1.2.3-59-g8ed1b From ca15df58b1b98f073393eef3704674b45d1cb474 Mon Sep 17 00:00:00 2001 From: Bruce Allan Date: Mon, 26 Oct 2009 11:23:43 +0000 Subject: e1000e: separate mutex usage between NVM and PHY/CSR register for ICHx/PCH Accesses to NVM and PHY/CSR registers on ICHx/PCH-based parts are protected from concurrent accesses with a mutex that is acquired when the access is initiated and released when the access has completed. However, the two types of accesses should not be protected by the same mutex because the driver may have to access the NVM while already holding the mutex over several consecutive PHY/CSR accesses which would result in livelock. Signed-off-by: Bruce Allan Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller --- drivers/net/e1000e/ich8lan.c | 89 +++++++++++++++++++++++++++++--------------- 1 file changed, 58 insertions(+), 31 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/e1000e/ich8lan.c b/drivers/net/e1000e/ich8lan.c index 2451dc8aef70..aaaaf2ca4084 100644 --- a/drivers/net/e1000e/ich8lan.c +++ b/drivers/net/e1000e/ich8lan.c @@ -577,13 +577,40 @@ static s32 e1000_get_variants_ich8lan(struct e1000_adapter *adapter) static DEFINE_MUTEX(nvm_mutex); +/** + * e1000_acquire_nvm_ich8lan - Acquire NVM mutex + * @hw: pointer to the HW structure + * + * Acquires the mutex for performing NVM operations. + **/ +static s32 e1000_acquire_nvm_ich8lan(struct e1000_hw *hw) +{ + mutex_lock(&nvm_mutex); + + return 0; +} + +/** + * e1000_release_nvm_ich8lan - Release NVM mutex + * @hw: pointer to the HW structure + * + * Releases the mutex used while performing NVM operations. + **/ +static void e1000_release_nvm_ich8lan(struct e1000_hw *hw) +{ + mutex_unlock(&nvm_mutex); + + return; +} + +static DEFINE_MUTEX(swflag_mutex); + /** * e1000_acquire_swflag_ich8lan - Acquire software control flag * @hw: pointer to the HW structure * - * Acquires the software control flag for performing NVM and PHY - * operations. This is a function pointer entry point only called by - * read/write routines for the PHY and NVM parts. + * Acquires the software control flag for performing PHY and select + * MAC CSR accesses. **/ static s32 e1000_acquire_swflag_ich8lan(struct e1000_hw *hw) { @@ -592,7 +619,7 @@ static s32 e1000_acquire_swflag_ich8lan(struct e1000_hw *hw) might_sleep(); - mutex_lock(&nvm_mutex); + mutex_lock(&swflag_mutex); while (timeout) { extcnf_ctrl = er32(EXTCNF_CTRL); @@ -633,7 +660,7 @@ static s32 e1000_acquire_swflag_ich8lan(struct e1000_hw *hw) out: if (ret_val) - mutex_unlock(&nvm_mutex); + mutex_unlock(&swflag_mutex); return ret_val; } @@ -642,9 +669,8 @@ out: * e1000_release_swflag_ich8lan - Release software control flag * @hw: pointer to the HW structure * - * Releases the software control flag for performing NVM and PHY operations. - * This is a function pointer entry point only called by read/write - * routines for the PHY and NVM parts. + * Releases the software control flag for performing PHY and select + * MAC CSR accesses. **/ static void e1000_release_swflag_ich8lan(struct e1000_hw *hw) { @@ -654,7 +680,9 @@ static void e1000_release_swflag_ich8lan(struct e1000_hw *hw) extcnf_ctrl &= ~E1000_EXTCNF_CTRL_SWFLAG; ew32(EXTCNF_CTRL, extcnf_ctrl); - mutex_unlock(&nvm_mutex); + mutex_unlock(&swflag_mutex); + + return; } /** @@ -1360,12 +1388,11 @@ static s32 e1000_read_nvm_ich8lan(struct e1000_hw *hw, u16 offset, u16 words, if ((offset >= nvm->word_size) || (words > nvm->word_size - offset) || (words == 0)) { hw_dbg(hw, "nvm parameter(s) out of bounds\n"); - return -E1000_ERR_NVM; + ret_val = -E1000_ERR_NVM; + goto out; } - ret_val = e1000_acquire_swflag_ich8lan(hw); - if (ret_val) - goto out; + nvm->ops.acquire_nvm(hw); ret_val = e1000_valid_nvm_bank_detect_ich8lan(hw, &bank); if (ret_val) { @@ -1391,7 +1418,7 @@ static s32 e1000_read_nvm_ich8lan(struct e1000_hw *hw, u16 offset, u16 words, } } - e1000_release_swflag_ich8lan(hw); + nvm->ops.release_nvm(hw); out: if (ret_val) @@ -1649,11 +1676,15 @@ static s32 e1000_write_nvm_ich8lan(struct e1000_hw *hw, u16 offset, u16 words, return -E1000_ERR_NVM; } + nvm->ops.acquire_nvm(hw); + for (i = 0; i < words; i++) { dev_spec->shadow_ram[offset+i].modified = 1; dev_spec->shadow_ram[offset+i].value = data[i]; } + nvm->ops.release_nvm(hw); + return 0; } @@ -1683,9 +1714,7 @@ static s32 e1000_update_nvm_checksum_ich8lan(struct e1000_hw *hw) if (nvm->type != e1000_nvm_flash_sw) goto out; - ret_val = e1000_acquire_swflag_ich8lan(hw); - if (ret_val) - goto out; + nvm->ops.acquire_nvm(hw); /* * We're writing to the opposite bank so if we're on bank 1, @@ -1703,7 +1732,7 @@ static s32 e1000_update_nvm_checksum_ich8lan(struct e1000_hw *hw) old_bank_offset = 0; ret_val = e1000_erase_flash_bank_ich8lan(hw, 1); if (ret_val) { - e1000_release_swflag_ich8lan(hw); + nvm->ops.release_nvm(hw); goto out; } } else { @@ -1711,7 +1740,7 @@ static s32 e1000_update_nvm_checksum_ich8lan(struct e1000_hw *hw) new_bank_offset = 0; ret_val = e1000_erase_flash_bank_ich8lan(hw, 0); if (ret_val) { - e1000_release_swflag_ich8lan(hw); + nvm->ops.release_nvm(hw); goto out; } } @@ -1769,7 +1798,7 @@ static s32 e1000_update_nvm_checksum_ich8lan(struct e1000_hw *hw) if (ret_val) { /* Possibly read-only, see e1000e_write_protect_nvm_ich8lan() */ hw_dbg(hw, "Flash commit failed.\n"); - e1000_release_swflag_ich8lan(hw); + nvm->ops.release_nvm(hw); goto out; } @@ -1782,7 +1811,7 @@ static s32 e1000_update_nvm_checksum_ich8lan(struct e1000_hw *hw) act_offset = new_bank_offset + E1000_ICH_NVM_SIG_WORD; ret_val = e1000_read_flash_word_ich8lan(hw, act_offset, &data); if (ret_val) { - e1000_release_swflag_ich8lan(hw); + nvm->ops.release_nvm(hw); goto out; } data &= 0xBFFF; @@ -1790,7 +1819,7 @@ static s32 e1000_update_nvm_checksum_ich8lan(struct e1000_hw *hw) act_offset * 2 + 1, (u8)(data >> 8)); if (ret_val) { - e1000_release_swflag_ich8lan(hw); + nvm->ops.release_nvm(hw); goto out; } @@ -1803,7 +1832,7 @@ static s32 e1000_update_nvm_checksum_ich8lan(struct e1000_hw *hw) act_offset = (old_bank_offset + E1000_ICH_NVM_SIG_WORD) * 2 + 1; ret_val = e1000_retry_write_flash_byte_ich8lan(hw, act_offset, 0); if (ret_val) { - e1000_release_swflag_ich8lan(hw); + nvm->ops.release_nvm(hw); goto out; } @@ -1813,7 +1842,7 @@ static s32 e1000_update_nvm_checksum_ich8lan(struct e1000_hw *hw) dev_spec->shadow_ram[i].value = 0xFFFF; } - e1000_release_swflag_ich8lan(hw); + nvm->ops.release_nvm(hw); /* * Reload the EEPROM, or else modifications will not appear @@ -1877,14 +1906,12 @@ static s32 e1000_validate_nvm_checksum_ich8lan(struct e1000_hw *hw) **/ void e1000e_write_protect_nvm_ich8lan(struct e1000_hw *hw) { + struct e1000_nvm_info *nvm = &hw->nvm; union ich8_flash_protected_range pr0; union ich8_hws_flash_status hsfsts; u32 gfpreg; - s32 ret_val; - ret_val = e1000_acquire_swflag_ich8lan(hw); - if (ret_val) - return; + nvm->ops.acquire_nvm(hw); gfpreg = er32flash(ICH_FLASH_GFPREG); @@ -1905,7 +1932,7 @@ void e1000e_write_protect_nvm_ich8lan(struct e1000_hw *hw) hsfsts.hsf_status.flockdn = true; ew32flash(ICH_FLASH_HSFSTS, hsfsts.regval); - e1000_release_swflag_ich8lan(hw); + nvm->ops.release_nvm(hw); } /** @@ -3162,9 +3189,9 @@ static struct e1000_phy_operations ich8_phy_ops = { }; static struct e1000_nvm_operations ich8_nvm_ops = { - .acquire_nvm = e1000_acquire_swflag_ich8lan, + .acquire_nvm = e1000_acquire_nvm_ich8lan, .read_nvm = e1000_read_nvm_ich8lan, - .release_nvm = e1000_release_swflag_ich8lan, + .release_nvm = e1000_release_nvm_ich8lan, .update_nvm = e1000_update_nvm_checksum_ich8lan, .valid_led_default = e1000_valid_led_default_ich8lan, .validate_nvm = e1000_validate_nvm_checksum_ich8lan, -- cgit v1.2.3-59-g8ed1b From 5ccdcecb72692d46d7a9264e62751241c7eca559 Mon Sep 17 00:00:00 2001 From: Bruce Allan Date: Mon, 26 Oct 2009 11:24:02 +0000 Subject: e1000e: allow for swflag to be held over consecutive PHY accesses PCH-based parts (82577/82578) and some ICH8-based parts (82566) need to hold the swflag (sw/fw/hw hardware semaphore) over consecutive PHY accesses in order to perform sw-driven PHY configuration during initialization to workaround known hardware issues (see follow-on patch). This patch provides new PHY read/write functions (and function pointers) that will allow accessing the PHY registers assuming the swflag has already been acquired. The actual PHY register access code has moved into helper functions that are called with a flag indicating whether or not the swflag has already been acquired and acquires/releases it if not. The functions called from within the updated PHY access functions had to be updated to assume the swflag was already acquired, and other functions that called those functions were also updated to acquire/release the swflag. Signed-off-by: Bruce Allan Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller --- drivers/net/e1000e/e1000.h | 12 ++ drivers/net/e1000e/hw.h | 2 + drivers/net/e1000e/ich8lan.c | 4 + drivers/net/e1000e/phy.c | 469 ++++++++++++++++++++++++++++++------------- 4 files changed, 346 insertions(+), 141 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/e1000e/e1000.h b/drivers/net/e1000e/e1000.h index 981936c1fb46..405a144ebcad 100644 --- a/drivers/net/e1000e/e1000.h +++ b/drivers/net/e1000e/e1000.h @@ -519,9 +519,13 @@ extern s32 e1000e_phy_force_speed_duplex_igp(struct e1000_hw *hw); extern s32 e1000e_get_cable_length_igp_2(struct e1000_hw *hw); extern s32 e1000e_get_phy_info_igp(struct e1000_hw *hw); extern s32 e1000e_read_phy_reg_igp(struct e1000_hw *hw, u32 offset, u16 *data); +extern s32 e1000e_read_phy_reg_igp_locked(struct e1000_hw *hw, u32 offset, + u16 *data); extern s32 e1000e_phy_hw_reset_generic(struct e1000_hw *hw); extern s32 e1000e_set_d3_lplu_state(struct e1000_hw *hw, bool active); extern s32 e1000e_write_phy_reg_igp(struct e1000_hw *hw, u32 offset, u16 data); +extern s32 e1000e_write_phy_reg_igp_locked(struct e1000_hw *hw, u32 offset, + u16 data); extern s32 e1000e_phy_sw_reset(struct e1000_hw *hw); extern s32 e1000e_phy_force_speed_duplex_m88(struct e1000_hw *hw); extern s32 e1000e_get_cfg_done(struct e1000_hw *hw); @@ -538,7 +542,11 @@ extern s32 e1000e_read_phy_reg_bm2(struct e1000_hw *hw, u32 offset, u16 *data); extern s32 e1000e_write_phy_reg_bm2(struct e1000_hw *hw, u32 offset, u16 data); extern void e1000e_phy_force_speed_duplex_setup(struct e1000_hw *hw, u16 *phy_ctrl); extern s32 e1000e_write_kmrn_reg(struct e1000_hw *hw, u32 offset, u16 data); +extern s32 e1000e_write_kmrn_reg_locked(struct e1000_hw *hw, u32 offset, + u16 data); extern s32 e1000e_read_kmrn_reg(struct e1000_hw *hw, u32 offset, u16 *data); +extern s32 e1000e_read_kmrn_reg_locked(struct e1000_hw *hw, u32 offset, + u16 *data); extern s32 e1000e_phy_has_link_generic(struct e1000_hw *hw, u32 iterations, u32 usec_interval, bool *success); extern s32 e1000e_phy_reset_dsp(struct e1000_hw *hw); @@ -546,7 +554,11 @@ extern s32 e1000e_read_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 *data); extern s32 e1000e_write_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 data); extern s32 e1000e_check_downshift(struct e1000_hw *hw); extern s32 e1000_read_phy_reg_hv(struct e1000_hw *hw, u32 offset, u16 *data); +extern s32 e1000_read_phy_reg_hv_locked(struct e1000_hw *hw, u32 offset, + u16 *data); extern s32 e1000_write_phy_reg_hv(struct e1000_hw *hw, u32 offset, u16 data); +extern s32 e1000_write_phy_reg_hv_locked(struct e1000_hw *hw, u32 offset, + u16 data); extern s32 e1000_set_mdio_slow_mode_hv(struct e1000_hw *hw, bool slow); extern s32 e1000_link_stall_workaround_hv(struct e1000_hw *hw); extern s32 e1000_copper_link_setup_82577(struct e1000_hw *hw); diff --git a/drivers/net/e1000e/hw.h b/drivers/net/e1000e/hw.h index fd44d9f90769..7b05cf47f7f5 100644 --- a/drivers/net/e1000e/hw.h +++ b/drivers/net/e1000e/hw.h @@ -764,11 +764,13 @@ struct e1000_phy_operations { s32 (*get_cable_length)(struct e1000_hw *); s32 (*get_phy_info)(struct e1000_hw *); s32 (*read_phy_reg)(struct e1000_hw *, u32, u16 *); + s32 (*read_phy_reg_locked)(struct e1000_hw *, u32, u16 *); void (*release_phy)(struct e1000_hw *); s32 (*reset_phy)(struct e1000_hw *); s32 (*set_d0_lplu_state)(struct e1000_hw *, bool); s32 (*set_d3_lplu_state)(struct e1000_hw *, bool); s32 (*write_phy_reg)(struct e1000_hw *, u32, u16); + s32 (*write_phy_reg_locked)(struct e1000_hw *, u32, u16); s32 (*cfg_on_link_up)(struct e1000_hw *); }; diff --git a/drivers/net/e1000e/ich8lan.c b/drivers/net/e1000e/ich8lan.c index aaaaf2ca4084..b6388b9535fd 100644 --- a/drivers/net/e1000e/ich8lan.c +++ b/drivers/net/e1000e/ich8lan.c @@ -250,9 +250,11 @@ static s32 e1000_init_phy_params_pchlan(struct e1000_hw *hw) phy->ops.check_polarity = e1000_check_polarity_ife_ich8lan; phy->ops.read_phy_reg = e1000_read_phy_reg_hv; + phy->ops.read_phy_reg_locked = e1000_read_phy_reg_hv_locked; phy->ops.set_d0_lplu_state = e1000_set_lplu_state_pchlan; phy->ops.set_d3_lplu_state = e1000_set_lplu_state_pchlan; phy->ops.write_phy_reg = e1000_write_phy_reg_hv; + phy->ops.write_phy_reg_locked = e1000_write_phy_reg_hv_locked; phy->autoneg_mask = AUTONEG_ADVERTISE_SPEED_DEFAULT; phy->id = e1000_phy_unknown; @@ -313,6 +315,8 @@ static s32 e1000_init_phy_params_ich8lan(struct e1000_hw *hw) case IGP03E1000_E_PHY_ID: phy->type = e1000_phy_igp_3; phy->autoneg_mask = AUTONEG_ADVERTISE_SPEED_DEFAULT; + phy->ops.read_phy_reg_locked = e1000e_read_phy_reg_igp_locked; + phy->ops.write_phy_reg_locked = e1000e_write_phy_reg_igp_locked; break; case IFE_E_PHY_ID: case IFE_PLUS_E_PHY_ID: diff --git a/drivers/net/e1000e/phy.c b/drivers/net/e1000e/phy.c index 994401fd0664..f9d33ab05e97 100644 --- a/drivers/net/e1000e/phy.c +++ b/drivers/net/e1000e/phy.c @@ -164,16 +164,25 @@ s32 e1000e_get_phy_id(struct e1000_hw *hw) * MDIC mode. No harm in trying again in this case since * the PHY ID is unknown at this point anyway */ + ret_val = phy->ops.acquire_phy(hw); + if (ret_val) + goto out; ret_val = e1000_set_mdio_slow_mode_hv(hw, true); if (ret_val) goto out; + phy->ops.release_phy(hw); retry_count++; } out: /* Revert to MDIO fast mode, if applicable */ - if (retry_count) + if (retry_count) { + ret_val = phy->ops.acquire_phy(hw); + if (ret_val) + return ret_val; ret_val = e1000_set_mdio_slow_mode_hv(hw, false); + phy->ops.release_phy(hw); + } return ret_val; } @@ -354,94 +363,173 @@ s32 e1000e_write_phy_reg_m88(struct e1000_hw *hw, u32 offset, u16 data) } /** - * e1000e_read_phy_reg_igp - Read igp PHY register + * __e1000e_read_phy_reg_igp - Read igp PHY register * @hw: pointer to the HW structure * @offset: register offset to be read * @data: pointer to the read data + * @locked: semaphore has already been acquired or not * * Acquires semaphore, if necessary, then reads the PHY register at offset - * and storing the retrieved information in data. Release any acquired + * and stores the retrieved information in data. Release any acquired * semaphores before exiting. **/ -s32 e1000e_read_phy_reg_igp(struct e1000_hw *hw, u32 offset, u16 *data) +static s32 __e1000e_read_phy_reg_igp(struct e1000_hw *hw, u32 offset, u16 *data, + bool locked) { - s32 ret_val; + s32 ret_val = 0; - ret_val = hw->phy.ops.acquire_phy(hw); - if (ret_val) - return ret_val; + if (!locked) { + if (!(hw->phy.ops.acquire_phy)) + goto out; + + ret_val = hw->phy.ops.acquire_phy(hw); + if (ret_val) + goto out; + } if (offset > MAX_PHY_MULTI_PAGE_REG) { ret_val = e1000e_write_phy_reg_mdic(hw, IGP01E1000_PHY_PAGE_SELECT, (u16)offset); - if (ret_val) { - hw->phy.ops.release_phy(hw); - return ret_val; - } + if (ret_val) + goto release; } ret_val = e1000e_read_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & offset, - data); - - hw->phy.ops.release_phy(hw); + data); +release: + if (!locked) + hw->phy.ops.release_phy(hw); +out: return ret_val; } +/** + * e1000e_read_phy_reg_igp - Read igp PHY register + * @hw: pointer to the HW structure + * @offset: register offset to be read + * @data: pointer to the read data + * + * Acquires semaphore then reads the PHY register at offset and stores the + * retrieved information in data. + * Release the acquired semaphore before exiting. + **/ +s32 e1000e_read_phy_reg_igp(struct e1000_hw *hw, u32 offset, u16 *data) +{ + return __e1000e_read_phy_reg_igp(hw, offset, data, false); +} + +/** + * e1000e_read_phy_reg_igp_locked - Read igp PHY register + * @hw: pointer to the HW structure + * @offset: register offset to be read + * @data: pointer to the read data + * + * Reads the PHY register at offset and stores the retrieved information + * in data. Assumes semaphore already acquired. + **/ +s32 e1000e_read_phy_reg_igp_locked(struct e1000_hw *hw, u32 offset, u16 *data) +{ + return __e1000e_read_phy_reg_igp(hw, offset, data, true); +} + /** * e1000e_write_phy_reg_igp - Write igp PHY register * @hw: pointer to the HW structure * @offset: register offset to write to * @data: data to write at register offset + * @locked: semaphore has already been acquired or not * * Acquires semaphore, if necessary, then writes the data to PHY register * at the offset. Release any acquired semaphores before exiting. **/ -s32 e1000e_write_phy_reg_igp(struct e1000_hw *hw, u32 offset, u16 data) +static s32 __e1000e_write_phy_reg_igp(struct e1000_hw *hw, u32 offset, u16 data, + bool locked) { - s32 ret_val; + s32 ret_val = 0; - ret_val = hw->phy.ops.acquire_phy(hw); - if (ret_val) - return ret_val; + if (!locked) { + if (!(hw->phy.ops.acquire_phy)) + goto out; + + ret_val = hw->phy.ops.acquire_phy(hw); + if (ret_val) + goto out; + } if (offset > MAX_PHY_MULTI_PAGE_REG) { ret_val = e1000e_write_phy_reg_mdic(hw, IGP01E1000_PHY_PAGE_SELECT, (u16)offset); - if (ret_val) { - hw->phy.ops.release_phy(hw); - return ret_val; - } + if (ret_val) + goto release; } ret_val = e1000e_write_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & offset, data); - hw->phy.ops.release_phy(hw); +release: + if (!locked) + hw->phy.ops.release_phy(hw); +out: return ret_val; } /** - * e1000e_read_kmrn_reg - Read kumeran register + * e1000e_write_phy_reg_igp - Write igp PHY register + * @hw: pointer to the HW structure + * @offset: register offset to write to + * @data: data to write at register offset + * + * Acquires semaphore then writes the data to PHY register + * at the offset. Release any acquired semaphores before exiting. + **/ +s32 e1000e_write_phy_reg_igp(struct e1000_hw *hw, u32 offset, u16 data) +{ + return __e1000e_write_phy_reg_igp(hw, offset, data, false); +} + +/** + * e1000e_write_phy_reg_igp_locked - Write igp PHY register + * @hw: pointer to the HW structure + * @offset: register offset to write to + * @data: data to write at register offset + * + * Writes the data to PHY register at the offset. + * Assumes semaphore already acquired. + **/ +s32 e1000e_write_phy_reg_igp_locked(struct e1000_hw *hw, u32 offset, u16 data) +{ + return __e1000e_write_phy_reg_igp(hw, offset, data, true); +} + +/** + * __e1000_read_kmrn_reg - Read kumeran register * @hw: pointer to the HW structure * @offset: register offset to be read * @data: pointer to the read data + * @locked: semaphore has already been acquired or not * * Acquires semaphore, if necessary. Then reads the PHY register at offset * using the kumeran interface. The information retrieved is stored in data. * Release any acquired semaphores before exiting. **/ -s32 e1000e_read_kmrn_reg(struct e1000_hw *hw, u32 offset, u16 *data) +static s32 __e1000_read_kmrn_reg(struct e1000_hw *hw, u32 offset, u16 *data, + bool locked) { u32 kmrnctrlsta; - s32 ret_val; + s32 ret_val = 0; - ret_val = hw->phy.ops.acquire_phy(hw); - if (ret_val) - return ret_val; + if (!locked) { + if (!(hw->phy.ops.acquire_phy)) + goto out; + + ret_val = hw->phy.ops.acquire_phy(hw); + if (ret_val) + goto out; + } kmrnctrlsta = ((offset << E1000_KMRNCTRLSTA_OFFSET_SHIFT) & E1000_KMRNCTRLSTA_OFFSET) | E1000_KMRNCTRLSTA_REN; @@ -452,40 +540,110 @@ s32 e1000e_read_kmrn_reg(struct e1000_hw *hw, u32 offset, u16 *data) kmrnctrlsta = er32(KMRNCTRLSTA); *data = (u16)kmrnctrlsta; - hw->phy.ops.release_phy(hw); + if (!locked) + hw->phy.ops.release_phy(hw); +out: return ret_val; } /** - * e1000e_write_kmrn_reg - Write kumeran register + * e1000e_read_kmrn_reg - Read kumeran register + * @hw: pointer to the HW structure + * @offset: register offset to be read + * @data: pointer to the read data + * + * Acquires semaphore then reads the PHY register at offset using the + * kumeran interface. The information retrieved is stored in data. + * Release the acquired semaphore before exiting. + **/ +s32 e1000e_read_kmrn_reg(struct e1000_hw *hw, u32 offset, u16 *data) +{ + return __e1000_read_kmrn_reg(hw, offset, data, false); +} + +/** + * e1000_read_kmrn_reg_locked - Read kumeran register + * @hw: pointer to the HW structure + * @offset: register offset to be read + * @data: pointer to the read data + * + * Reads the PHY register at offset using the kumeran interface. The + * information retrieved is stored in data. + * Assumes semaphore already acquired. + **/ +s32 e1000_read_kmrn_reg_locked(struct e1000_hw *hw, u32 offset, u16 *data) +{ + return __e1000_read_kmrn_reg(hw, offset, data, true); +} + +/** + * __e1000_write_kmrn_reg - Write kumeran register * @hw: pointer to the HW structure * @offset: register offset to write to * @data: data to write at register offset + * @locked: semaphore has already been acquired or not * * Acquires semaphore, if necessary. Then write the data to PHY register * at the offset using the kumeran interface. Release any acquired semaphores * before exiting. **/ -s32 e1000e_write_kmrn_reg(struct e1000_hw *hw, u32 offset, u16 data) +static s32 __e1000_write_kmrn_reg(struct e1000_hw *hw, u32 offset, u16 data, + bool locked) { u32 kmrnctrlsta; - s32 ret_val; + s32 ret_val = 0; - ret_val = hw->phy.ops.acquire_phy(hw); - if (ret_val) - return ret_val; + if (!locked) { + if (!(hw->phy.ops.acquire_phy)) + goto out; + + ret_val = hw->phy.ops.acquire_phy(hw); + if (ret_val) + goto out; + } kmrnctrlsta = ((offset << E1000_KMRNCTRLSTA_OFFSET_SHIFT) & E1000_KMRNCTRLSTA_OFFSET) | data; ew32(KMRNCTRLSTA, kmrnctrlsta); udelay(2); - hw->phy.ops.release_phy(hw); + if (!locked) + hw->phy.ops.release_phy(hw); + +out: return ret_val; } +/** + * e1000e_write_kmrn_reg - Write kumeran register + * @hw: pointer to the HW structure + * @offset: register offset to write to + * @data: data to write at register offset + * + * Acquires semaphore then writes the data to the PHY register at the offset + * using the kumeran interface. Release the acquired semaphore before exiting. + **/ +s32 e1000e_write_kmrn_reg(struct e1000_hw *hw, u32 offset, u16 data) +{ + return __e1000_write_kmrn_reg(hw, offset, data, false); +} + +/** + * e1000_write_kmrn_reg_locked - Write kumeran register + * @hw: pointer to the HW structure + * @offset: register offset to write to + * @data: data to write at register offset + * + * Write the data to PHY register at the offset using the kumeran interface. + * Assumes semaphore already acquired. + **/ +s32 e1000_write_kmrn_reg_locked(struct e1000_hw *hw, u32 offset, u16 data) +{ + return __e1000_write_kmrn_reg(hw, offset, data, true); +} + /** * e1000_copper_link_setup_82577 - Setup 82577 PHY for copper link * @hw: pointer to the HW structure @@ -2105,6 +2263,10 @@ s32 e1000e_write_phy_reg_bm(struct e1000_hw *hw, u32 offset, u16 data) u32 page = offset >> IGP_PAGE_SHIFT; u32 page_shift = 0; + ret_val = hw->phy.ops.acquire_phy(hw); + if (ret_val) + return ret_val; + /* Page 800 works differently than the rest so it has its own func */ if (page == BM_WUC_PAGE) { ret_val = e1000_access_phy_wakeup_reg_bm(hw, offset, &data, @@ -2112,10 +2274,6 @@ s32 e1000e_write_phy_reg_bm(struct e1000_hw *hw, u32 offset, u16 data) goto out; } - ret_val = hw->phy.ops.acquire_phy(hw); - if (ret_val) - goto out; - hw->phy.addr = e1000_get_phy_addr_for_bm_page(page, offset); if (offset > MAX_PHY_MULTI_PAGE_REG) { @@ -2135,18 +2293,15 @@ s32 e1000e_write_phy_reg_bm(struct e1000_hw *hw, u32 offset, u16 data) /* Page is shifted left, PHY expects (page x 32) */ ret_val = e1000e_write_phy_reg_mdic(hw, page_select, (page << page_shift)); - if (ret_val) { - hw->phy.ops.release_phy(hw); + if (ret_val) goto out; - } } ret_val = e1000e_write_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & offset, data); - hw->phy.ops.release_phy(hw); - out: + hw->phy.ops.release_phy(hw); return ret_val; } @@ -2167,6 +2322,10 @@ s32 e1000e_read_phy_reg_bm(struct e1000_hw *hw, u32 offset, u16 *data) u32 page = offset >> IGP_PAGE_SHIFT; u32 page_shift = 0; + ret_val = hw->phy.ops.acquire_phy(hw); + if (ret_val) + return ret_val; + /* Page 800 works differently than the rest so it has its own func */ if (page == BM_WUC_PAGE) { ret_val = e1000_access_phy_wakeup_reg_bm(hw, offset, data, @@ -2174,10 +2333,6 @@ s32 e1000e_read_phy_reg_bm(struct e1000_hw *hw, u32 offset, u16 *data) goto out; } - ret_val = hw->phy.ops.acquire_phy(hw); - if (ret_val) - goto out; - hw->phy.addr = e1000_get_phy_addr_for_bm_page(page, offset); if (offset > MAX_PHY_MULTI_PAGE_REG) { @@ -2197,17 +2352,14 @@ s32 e1000e_read_phy_reg_bm(struct e1000_hw *hw, u32 offset, u16 *data) /* Page is shifted left, PHY expects (page x 32) */ ret_val = e1000e_write_phy_reg_mdic(hw, page_select, (page << page_shift)); - if (ret_val) { - hw->phy.ops.release_phy(hw); + if (ret_val) goto out; - } } ret_val = e1000e_read_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & offset, data); - hw->phy.ops.release_phy(hw); - out: + hw->phy.ops.release_phy(hw); return ret_val; } @@ -2226,17 +2378,17 @@ s32 e1000e_read_phy_reg_bm2(struct e1000_hw *hw, u32 offset, u16 *data) s32 ret_val; u16 page = (u16)(offset >> IGP_PAGE_SHIFT); + ret_val = hw->phy.ops.acquire_phy(hw); + if (ret_val) + return ret_val; + /* Page 800 works differently than the rest so it has its own func */ if (page == BM_WUC_PAGE) { ret_val = e1000_access_phy_wakeup_reg_bm(hw, offset, data, true); - return ret_val; + goto out; } - ret_val = hw->phy.ops.acquire_phy(hw); - if (ret_val) - return ret_val; - hw->phy.addr = 1; if (offset > MAX_PHY_MULTI_PAGE_REG) { @@ -2245,16 +2397,14 @@ s32 e1000e_read_phy_reg_bm2(struct e1000_hw *hw, u32 offset, u16 *data) ret_val = e1000e_write_phy_reg_mdic(hw, BM_PHY_PAGE_SELECT, page); - if (ret_val) { - hw->phy.ops.release_phy(hw); - return ret_val; - } + if (ret_val) + goto out; } ret_val = e1000e_read_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & offset, data); +out: hw->phy.ops.release_phy(hw); - return ret_val; } @@ -2272,17 +2422,17 @@ s32 e1000e_write_phy_reg_bm2(struct e1000_hw *hw, u32 offset, u16 data) s32 ret_val; u16 page = (u16)(offset >> IGP_PAGE_SHIFT); + ret_val = hw->phy.ops.acquire_phy(hw); + if (ret_val) + return ret_val; + /* Page 800 works differently than the rest so it has its own func */ if (page == BM_WUC_PAGE) { ret_val = e1000_access_phy_wakeup_reg_bm(hw, offset, &data, false); - return ret_val; + goto out; } - ret_val = hw->phy.ops.acquire_phy(hw); - if (ret_val) - return ret_val; - hw->phy.addr = 1; if (offset > MAX_PHY_MULTI_PAGE_REG) { @@ -2290,17 +2440,15 @@ s32 e1000e_write_phy_reg_bm2(struct e1000_hw *hw, u32 offset, u16 data) ret_val = e1000e_write_phy_reg_mdic(hw, BM_PHY_PAGE_SELECT, page); - if (ret_val) { - hw->phy.ops.release_phy(hw); - return ret_val; - } + if (ret_val) + goto out; } ret_val = e1000e_write_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & offset, data); +out: hw->phy.ops.release_phy(hw); - return ret_val; } @@ -2320,6 +2468,8 @@ s32 e1000e_write_phy_reg_bm2(struct e1000_hw *hw, u32 offset, u16 data) * 3) Write the address using the address opcode (0x11) * 4) Read or write the data using the data opcode (0x12) * 5) Restore 769_17.2 to its original value + * + * Assumes semaphore already acquired. **/ static s32 e1000_access_phy_wakeup_reg_bm(struct e1000_hw *hw, u32 offset, u16 *data, bool read) @@ -2327,20 +2477,12 @@ static s32 e1000_access_phy_wakeup_reg_bm(struct e1000_hw *hw, u32 offset, s32 ret_val; u16 reg = BM_PHY_REG_NUM(offset); u16 phy_reg = 0; - u8 phy_acquired = 1; - /* Gig must be disabled for MDIO accesses to page 800 */ if ((hw->mac.type == e1000_pchlan) && (!(er32(PHY_CTRL) & E1000_PHY_CTRL_GBE_DISABLE))) hw_dbg(hw, "Attempting to access page 800 while gig enabled\n"); - ret_val = hw->phy.ops.acquire_phy(hw); - if (ret_val) { - phy_acquired = 0; - goto out; - } - /* All operations in this function are phy address 1 */ hw->phy.addr = 1; @@ -2397,8 +2539,6 @@ static s32 e1000_access_phy_wakeup_reg_bm(struct e1000_hw *hw, u32 offset, ret_val = e1000e_write_phy_reg_mdic(hw, BM_WUC_ENABLE_REG, phy_reg); out: - if (phy_acquired == 1) - hw->phy.ops.release_phy(hw); return ret_val; } @@ -2439,52 +2579,63 @@ static s32 e1000_set_d0_lplu_state(struct e1000_hw *hw, bool active) return 0; } +/** + * e1000_set_mdio_slow_mode_hv - Set slow MDIO access mode + * @hw: pointer to the HW structure + * @slow: true for slow mode, false for normal mode + * + * Assumes semaphore already acquired. + **/ s32 e1000_set_mdio_slow_mode_hv(struct e1000_hw *hw, bool slow) { s32 ret_val = 0; u16 data = 0; - ret_val = hw->phy.ops.acquire_phy(hw); - if (ret_val) - return ret_val; - /* Set MDIO mode - page 769, register 16: 0x2580==slow, 0x2180==fast */ hw->phy.addr = 1; ret_val = e1000e_write_phy_reg_mdic(hw, IGP01E1000_PHY_PAGE_SELECT, (BM_PORT_CTRL_PAGE << IGP_PAGE_SHIFT)); - if (ret_val) { - hw->phy.ops.release_phy(hw); - return ret_val; - } + if (ret_val) + goto out; + ret_val = e1000e_write_phy_reg_mdic(hw, BM_CS_CTRL1, (0x2180 | (slow << 10))); + if (ret_val) + goto out; /* dummy read when reverting to fast mode - throw away result */ if (!slow) - e1000e_read_phy_reg_mdic(hw, BM_CS_CTRL1, &data); - - hw->phy.ops.release_phy(hw); + ret_val = e1000e_read_phy_reg_mdic(hw, BM_CS_CTRL1, &data); +out: return ret_val; } /** - * e1000_read_phy_reg_hv - Read HV PHY register + * __e1000_read_phy_reg_hv - Read HV PHY register * @hw: pointer to the HW structure * @offset: register offset to be read * @data: pointer to the read data + * @locked: semaphore has already been acquired or not * * Acquires semaphore, if necessary, then reads the PHY register at offset - * and storing the retrieved information in data. Release any acquired + * and stores the retrieved information in data. Release any acquired * semaphore before exiting. **/ -s32 e1000_read_phy_reg_hv(struct e1000_hw *hw, u32 offset, u16 *data) +static s32 __e1000_read_phy_reg_hv(struct e1000_hw *hw, u32 offset, u16 *data, + bool locked) { s32 ret_val; u16 page = BM_PHY_REG_PAGE(offset); u16 reg = BM_PHY_REG_NUM(offset); bool in_slow_mode = false; + if (!locked) { + ret_val = hw->phy.ops.acquire_phy(hw); + if (ret_val) + return ret_val; + } + /* Workaround failure in MDIO access while cable is disconnected */ if ((hw->phy.type == e1000_phy_82577) && !(er32(STATUS) & E1000_STATUS_LU)) { @@ -2508,10 +2659,6 @@ s32 e1000_read_phy_reg_hv(struct e1000_hw *hw, u32 offset, u16 *data) goto out; } - ret_val = hw->phy.ops.acquire_phy(hw); - if (ret_val) - goto out; - hw->phy.addr = e1000_get_phy_addr_for_hv_page(page); if (page == HV_INTC_FC_PAGE_START) @@ -2529,42 +2676,76 @@ s32 e1000_read_phy_reg_hv(struct e1000_hw *hw, u32 offset, u16 *data) ret_val = e1000e_write_phy_reg_mdic(hw, IGP01E1000_PHY_PAGE_SELECT, (page << IGP_PAGE_SHIFT)); - if (ret_val) { - hw->phy.ops.release_phy(hw); - goto out; - } hw->phy.addr = phy_addr; } } ret_val = e1000e_read_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & reg, data); - hw->phy.ops.release_phy(hw); - out: /* Revert to MDIO fast mode, if applicable */ if ((hw->phy.type == e1000_phy_82577) && in_slow_mode) ret_val = e1000_set_mdio_slow_mode_hv(hw, false); + if (!locked) + hw->phy.ops.release_phy(hw); + return ret_val; } /** - * e1000_write_phy_reg_hv - Write HV PHY register + * e1000_read_phy_reg_hv - Read HV PHY register + * @hw: pointer to the HW structure + * @offset: register offset to be read + * @data: pointer to the read data + * + * Acquires semaphore then reads the PHY register at offset and stores + * the retrieved information in data. Release the acquired semaphore + * before exiting. + **/ +s32 e1000_read_phy_reg_hv(struct e1000_hw *hw, u32 offset, u16 *data) +{ + return __e1000_read_phy_reg_hv(hw, offset, data, false); +} + +/** + * e1000_read_phy_reg_hv_locked - Read HV PHY register + * @hw: pointer to the HW structure + * @offset: register offset to be read + * @data: pointer to the read data + * + * Reads the PHY register at offset and stores the retrieved information + * in data. Assumes semaphore already acquired. + **/ +s32 e1000_read_phy_reg_hv_locked(struct e1000_hw *hw, u32 offset, u16 *data) +{ + return __e1000_read_phy_reg_hv(hw, offset, data, true); +} + +/** + * __e1000_write_phy_reg_hv - Write HV PHY register * @hw: pointer to the HW structure * @offset: register offset to write to * @data: data to write at register offset + * @locked: semaphore has already been acquired or not * * Acquires semaphore, if necessary, then writes the data to PHY register * at the offset. Release any acquired semaphores before exiting. **/ -s32 e1000_write_phy_reg_hv(struct e1000_hw *hw, u32 offset, u16 data) +static s32 __e1000_write_phy_reg_hv(struct e1000_hw *hw, u32 offset, u16 data, + bool locked) { s32 ret_val; u16 page = BM_PHY_REG_PAGE(offset); u16 reg = BM_PHY_REG_NUM(offset); bool in_slow_mode = false; + if (!locked) { + ret_val = hw->phy.ops.acquire_phy(hw); + if (ret_val) + return ret_val; + } + /* Workaround failure in MDIO access while cable is disconnected */ if ((hw->phy.type == e1000_phy_82577) && !(er32(STATUS) & E1000_STATUS_LU)) { @@ -2588,10 +2769,6 @@ s32 e1000_write_phy_reg_hv(struct e1000_hw *hw, u32 offset, u16 data) goto out; } - ret_val = hw->phy.ops.acquire_phy(hw); - if (ret_val) - goto out; - hw->phy.addr = e1000_get_phy_addr_for_hv_page(page); if (page == HV_INTC_FC_PAGE_START) @@ -2607,15 +2784,10 @@ s32 e1000_write_phy_reg_hv(struct e1000_hw *hw, u32 offset, u16 data) ((MAX_PHY_REG_ADDRESS & reg) == 0) && (data & (1 << 11))) { u16 data2 = 0x7EFF; - hw->phy.ops.release_phy(hw); ret_val = e1000_access_phy_debug_regs_hv(hw, (1 << 6) | 0x3, &data2, false); if (ret_val) goto out; - - ret_val = hw->phy.ops.acquire_phy(hw); - if (ret_val) - goto out; } if (reg > MAX_PHY_MULTI_PAGE_REG) { @@ -2630,26 +2802,52 @@ s32 e1000_write_phy_reg_hv(struct e1000_hw *hw, u32 offset, u16 data) ret_val = e1000e_write_phy_reg_mdic(hw, IGP01E1000_PHY_PAGE_SELECT, (page << IGP_PAGE_SHIFT)); - if (ret_val) { - hw->phy.ops.release_phy(hw); - goto out; - } hw->phy.addr = phy_addr; } } ret_val = e1000e_write_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & reg, data); - hw->phy.ops.release_phy(hw); out: /* Revert to MDIO fast mode, if applicable */ if ((hw->phy.type == e1000_phy_82577) && in_slow_mode) ret_val = e1000_set_mdio_slow_mode_hv(hw, false); + if (!locked) + hw->phy.ops.release_phy(hw); + return ret_val; } +/** + * e1000_write_phy_reg_hv - Write HV PHY register + * @hw: pointer to the HW structure + * @offset: register offset to write to + * @data: data to write at register offset + * + * Acquires semaphore then writes the data to PHY register at the offset. + * Release the acquired semaphores before exiting. + **/ +s32 e1000_write_phy_reg_hv(struct e1000_hw *hw, u32 offset, u16 data) +{ + return __e1000_write_phy_reg_hv(hw, offset, data, false); +} + +/** + * e1000_write_phy_reg_hv_locked - Write HV PHY register + * @hw: pointer to the HW structure + * @offset: register offset to write to + * @data: data to write at register offset + * + * Writes the data to PHY register at the offset. Assumes semaphore + * already acquired. + **/ +s32 e1000_write_phy_reg_hv_locked(struct e1000_hw *hw, u32 offset, u16 data) +{ + return __e1000_write_phy_reg_hv(hw, offset, data, true); +} + /** * e1000_get_phy_addr_for_hv_page - Get PHY adrress based on page * @page: page to be accessed @@ -2671,10 +2869,9 @@ static u32 e1000_get_phy_addr_for_hv_page(u32 page) * @data: pointer to the data to be read or written * @read: determines if operation is read or written * - * Acquires semaphore, if necessary, then reads the PHY register at offset - * and storing the retreived information in data. Release any acquired - * semaphores before exiting. Note that the procedure to read these regs - * uses the address port and data port to read/write. + * Reads the PHY register at offset and stores the retreived information + * in data. Assumes semaphore already acquired. Note that the procedure + * to read these regs uses the address port and data port to read/write. **/ static s32 e1000_access_phy_debug_regs_hv(struct e1000_hw *hw, u32 offset, u16 *data, bool read) @@ -2682,20 +2879,12 @@ static s32 e1000_access_phy_debug_regs_hv(struct e1000_hw *hw, u32 offset, s32 ret_val; u32 addr_reg = 0; u32 data_reg = 0; - u8 phy_acquired = 1; /* This takes care of the difference with desktop vs mobile phy */ addr_reg = (hw->phy.type == e1000_phy_82578) ? I82578_ADDR_REG : I82577_ADDR_REG; data_reg = addr_reg + 1; - ret_val = hw->phy.ops.acquire_phy(hw); - if (ret_val) { - hw_dbg(hw, "Could not acquire PHY\n"); - phy_acquired = 0; - goto out; - } - /* All operations in this function are phy address 2 */ hw->phy.addr = 2; @@ -2718,8 +2907,6 @@ static s32 e1000_access_phy_debug_regs_hv(struct e1000_hw *hw, u32 offset, } out: - if (phy_acquired == 1) - hw->phy.ops.release_phy(hw); return ret_val; } -- cgit v1.2.3-59-g8ed1b From fb64bb560e181363c29ed4fe12a0d82765d61733 Mon Sep 17 00:00:00 2001 From: Michal Ostrowski Date: Mon, 26 Oct 2009 16:23:20 -0700 Subject: PPPoE: Fix flush/close races. Be more careful about the state of pointers during tear-down. The "pppoe_dev" field can only be looked at safely while holding socket locks. This subsequently allows for the flush_lock to be killed. We depend on the PPPOX_CONNECTED state to tell us that that those fields are valid, so whoever clears that state (pppox_unbind_sock()) is responsible for the dev_put() call. We also have to ensure that we delete_item() on all sockets before they are cleaned up. The need for these changes has been exposed by scenarios wherein namespace bindings of ethernet devices change while there are ongoing PPPoE sessions, which resulted in oopses due to unusual socket connection termination paths, exposing these issues. Signed-off-by: Michal Ostrowski Reviewed-by: Cyril Gorcunov Reported-by: Denys Fedoryschenko Tested-by: Denys Fedoryschenko --- drivers/net/pppoe.c | 129 +++++++++++++++++++++++++++------------------------- 1 file changed, 68 insertions(+), 61 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/pppoe.c b/drivers/net/pppoe.c index 7cbf6f9b51de..2559991eea6a 100644 --- a/drivers/net/pppoe.c +++ b/drivers/net/pppoe.c @@ -111,9 +111,6 @@ struct pppoe_net { rwlock_t hash_lock; }; -/* to eliminate a race btw pppoe_flush_dev and pppoe_release */ -static DEFINE_SPINLOCK(flush_lock); - /* * PPPoE could be in the following stages: * 1) Discovery stage (to obtain remote MAC and Session ID) @@ -303,45 +300,48 @@ static void pppoe_flush_dev(struct net_device *dev) write_lock_bh(&pn->hash_lock); for (i = 0; i < PPPOE_HASH_SIZE; i++) { struct pppox_sock *po = pn->hash_table[i]; + struct sock *sk; - while (po != NULL) { - struct sock *sk; - if (po->pppoe_dev != dev) { + while (po) { + while (po && po->pppoe_dev != dev) { po = po->next; - continue; } + + if (!po) + break; + sk = sk_pppox(po); - spin_lock(&flush_lock); - po->pppoe_dev = NULL; - spin_unlock(&flush_lock); - dev_put(dev); /* We always grab the socket lock, followed by the - * hash_lock, in that order. Since we should - * hold the sock lock while doing any unbinding, - * we need to release the lock we're holding. - * Hold a reference to the sock so it doesn't disappear - * as we're jumping between locks. + * hash_lock, in that order. Since we should hold the + * sock lock while doing any unbinding, we need to + * release the lock we're holding. Hold a reference to + * the sock so it doesn't disappear as we're jumping + * between locks. */ sock_hold(sk); - write_unlock_bh(&pn->hash_lock); lock_sock(sk); - if (sk->sk_state & (PPPOX_CONNECTED | PPPOX_BOUND)) { + if (po->pppoe_dev == dev + && sk->sk_state & (PPPOX_CONNECTED | PPPOX_BOUND)) { pppox_unbind_sock(sk); sk->sk_state = PPPOX_ZOMBIE; sk->sk_state_change(sk); + po->pppoe_dev = NULL; + dev_put(dev); } release_sock(sk); sock_put(sk); - /* Restart scan at the beginning of this hash chain. - * While the lock was dropped the chain contents may - * have changed. + /* Restart the process from the start of the current + * hash chain. We dropped locks so the world may have + * change from underneath us. */ + + BUG_ON(pppoe_pernet(dev_net(dev)) == NULL); write_lock_bh(&pn->hash_lock); po = pn->hash_table[i]; } @@ -388,11 +388,16 @@ static int pppoe_rcv_core(struct sock *sk, struct sk_buff *skb) struct pppox_sock *po = pppox_sk(sk); struct pppox_sock *relay_po; + /* Backlog receive. Semantics of backlog rcv preclude any code from + * executing in lock_sock()/release_sock() bounds; meaning sk->sk_state + * can't change. + */ + if (sk->sk_state & PPPOX_BOUND) { ppp_input(&po->chan, skb); } else if (sk->sk_state & PPPOX_RELAY) { - relay_po = get_item_by_addr(dev_net(po->pppoe_dev), - &po->pppoe_relay); + relay_po = get_item_by_addr(sock_net(sk), + &po->pppoe_relay); if (relay_po == NULL) goto abort_kfree; @@ -447,6 +452,10 @@ static int pppoe_rcv(struct sk_buff *skb, struct net_device *dev, goto drop; pn = pppoe_pernet(dev_net(dev)); + + /* Note that get_item does a sock_hold(), so sk_pppox(po) + * is known to be safe. + */ po = get_item(pn, ph->sid, eth_hdr(skb)->h_source, dev->ifindex); if (!po) goto drop; @@ -561,6 +570,7 @@ static int pppoe_release(struct socket *sock) struct sock *sk = sock->sk; struct pppox_sock *po; struct pppoe_net *pn; + struct net *net = NULL; if (!sk) return 0; @@ -571,44 +581,28 @@ static int pppoe_release(struct socket *sock) return -EBADF; } + po = pppox_sk(sk); + + if (sk->sk_state & (PPPOX_CONNECTED | PPPOX_BOUND)) { + dev_put(po->pppoe_dev); + po->pppoe_dev = NULL; + } + pppox_unbind_sock(sk); /* Signal the death of the socket. */ sk->sk_state = PPPOX_DEAD; - /* - * pppoe_flush_dev could lead to a race with - * this routine so we use flush_lock to eliminate - * such a case (we only need per-net specific data) - */ - spin_lock(&flush_lock); - po = pppox_sk(sk); - if (!po->pppoe_dev) { - spin_unlock(&flush_lock); - goto out; - } - pn = pppoe_pernet(dev_net(po->pppoe_dev)); - spin_unlock(&flush_lock); + net = sock_net(sk); + pn = pppoe_pernet(net); /* * protect "po" from concurrent updates * on pppoe_flush_dev */ - write_lock_bh(&pn->hash_lock); + delete_item(pn, po->pppoe_pa.sid, po->pppoe_pa.remote, + po->pppoe_ifindex); - po = pppox_sk(sk); - if (stage_session(po->pppoe_pa.sid)) - __delete_item(pn, po->pppoe_pa.sid, po->pppoe_pa.remote, - po->pppoe_ifindex); - - if (po->pppoe_dev) { - dev_put(po->pppoe_dev); - po->pppoe_dev = NULL; - } - - write_unlock_bh(&pn->hash_lock); - -out: sock_orphan(sk); sock->sk = NULL; @@ -625,8 +619,9 @@ static int pppoe_connect(struct socket *sock, struct sockaddr *uservaddr, struct sock *sk = sock->sk; struct sockaddr_pppox *sp = (struct sockaddr_pppox *)uservaddr; struct pppox_sock *po = pppox_sk(sk); - struct net_device *dev; + struct net_device *dev = NULL; struct pppoe_net *pn; + struct net *net = NULL; int error; lock_sock(sk); @@ -652,12 +647,14 @@ static int pppoe_connect(struct socket *sock, struct sockaddr *uservaddr, /* Delete the old binding */ if (stage_session(po->pppoe_pa.sid)) { pppox_unbind_sock(sk); + pn = pppoe_pernet(sock_net(sk)); + delete_item(pn, po->pppoe_pa.sid, + po->pppoe_pa.remote, po->pppoe_ifindex); if (po->pppoe_dev) { - pn = pppoe_pernet(dev_net(po->pppoe_dev)); - delete_item(pn, po->pppoe_pa.sid, - po->pppoe_pa.remote, po->pppoe_ifindex); dev_put(po->pppoe_dev); + po->pppoe_dev = NULL; } + memset(sk_pppox(po) + 1, 0, sizeof(struct pppox_sock) - sizeof(struct sock)); sk->sk_state = PPPOX_NONE; @@ -666,16 +663,15 @@ static int pppoe_connect(struct socket *sock, struct sockaddr *uservaddr, /* Re-bind in session stage only */ if (stage_session(sp->sa_addr.pppoe.sid)) { error = -ENODEV; - dev = dev_get_by_name(sock_net(sk), sp->sa_addr.pppoe.dev); + net = sock_net(sk); + dev = dev_get_by_name(net, sp->sa_addr.pppoe.dev); if (!dev) - goto end; + goto err_put; po->pppoe_dev = dev; po->pppoe_ifindex = dev->ifindex; - pn = pppoe_pernet(dev_net(dev)); - write_lock_bh(&pn->hash_lock); + pn = pppoe_pernet(net); if (!(dev->flags & IFF_UP)) { - write_unlock_bh(&pn->hash_lock); goto err_put; } @@ -683,6 +679,7 @@ static int pppoe_connect(struct socket *sock, struct sockaddr *uservaddr, &sp->sa_addr.pppoe, sizeof(struct pppoe_addr)); + write_lock_bh(&pn->hash_lock); error = __set_item(pn, po); write_unlock_bh(&pn->hash_lock); if (error < 0) @@ -696,8 +693,11 @@ static int pppoe_connect(struct socket *sock, struct sockaddr *uservaddr, po->chan.ops = &pppoe_chan_ops; error = ppp_register_net_channel(dev_net(dev), &po->chan); - if (error) + if (error) { + delete_item(pn, po->pppoe_pa.sid, + po->pppoe_pa.remote, po->pppoe_ifindex); goto err_put; + } sk->sk_state = PPPOX_CONNECTED; } @@ -915,6 +915,14 @@ static int __pppoe_xmit(struct sock *sk, struct sk_buff *skb) struct pppoe_hdr *ph; int data_len = skb->len; + /* The higher-level PPP code (ppp_unregister_channel()) ensures the PPP + * xmit operations conclude prior to an unregistration call. Thus + * sk->sk_state cannot change, so we don't need to do lock_sock(). + * But, we also can't do a lock_sock since that introduces a potential + * deadlock as we'd reverse the lock ordering used when calling + * ppp_unregister_channel(). + */ + if (sock_flag(sk, SOCK_DEAD) || !(sk->sk_state & PPPOX_CONNECTED)) goto abort; @@ -944,7 +952,6 @@ static int __pppoe_xmit(struct sock *sk, struct sk_buff *skb) po->pppoe_pa.remote, NULL, data_len); dev_queue_xmit(skb); - return 1; abort: -- cgit v1.2.3-59-g8ed1b From f568a926a353d6816b3704d7367f34371df44ce7 Mon Sep 17 00:00:00 2001 From: Nobuhiro Iwamatsu Date: Mon, 26 Oct 2009 13:49:50 +0000 Subject: sh_eth: Add asm/cacheflush.h Add include asm/cacheflush.h, because declaration of __flush_purge_region moved to asm/cacheflush.h. Signed-off-by: Nobuhiro Iwamatsu Signed-off-by: David S. Miller --- drivers/net/sh_eth.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers/net') diff --git a/drivers/net/sh_eth.c b/drivers/net/sh_eth.c index f49d0800c1d1..528b912a4b0d 100644 --- a/drivers/net/sh_eth.c +++ b/drivers/net/sh_eth.c @@ -30,6 +30,7 @@ #include #include #include +#include #include "sh_eth.h" -- cgit v1.2.3-59-g8ed1b