From fa6e98cee558622565c97924e922b97340aeabd8 Mon Sep 17 00:00:00 2001 From: Heiner Kallweit Date: Tue, 22 Oct 2019 11:31:07 -0700 Subject: net: phy: add support for clause 37 auto-negotiation MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This patch adds support for clause 37 1000Base-X auto-negotiation. Signed-off-by: Heiner Kallweit Signed-off-by: Tao Ren Tested-by: René van Dorst Reviewed-by: Andrew Lunn Signed-off-by: David S. Miller --- drivers/net/phy/phy_device.c | 139 +++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 139 insertions(+) (limited to 'drivers/net') diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c index f1f60bd4865a..fa71998fea51 100644 --- a/drivers/net/phy/phy_device.c +++ b/drivers/net/phy/phy_device.c @@ -1607,6 +1607,40 @@ static int genphy_config_advert(struct phy_device *phydev) return changed; } +/** + * genphy_c37_config_advert - sanitize and advertise auto-negotiation parameters + * @phydev: target phy_device struct + * + * Description: Writes MII_ADVERTISE with the appropriate values, + * after sanitizing the values to make sure we only advertise + * what is supported. Returns < 0 on error, 0 if the PHY's advertisement + * hasn't changed, and > 0 if it has changed. This function is intended + * for Clause 37 1000Base-X mode. + */ +static int genphy_c37_config_advert(struct phy_device *phydev) +{ + u16 adv = 0; + + /* Only allow advertising what this PHY supports */ + linkmode_and(phydev->advertising, phydev->advertising, + phydev->supported); + + if (linkmode_test_bit(ETHTOOL_LINK_MODE_1000baseX_Full_BIT, + phydev->advertising)) + adv |= ADVERTISE_1000XFULL; + if (linkmode_test_bit(ETHTOOL_LINK_MODE_Pause_BIT, + phydev->advertising)) + adv |= ADVERTISE_1000XPAUSE; + if (linkmode_test_bit(ETHTOOL_LINK_MODE_Asym_Pause_BIT, + phydev->advertising)) + adv |= ADVERTISE_1000XPSE_ASYM; + + return phy_modify_changed(phydev, MII_ADVERTISE, + ADVERTISE_1000XFULL | ADVERTISE_1000XPAUSE | + ADVERTISE_1000XHALF | ADVERTISE_1000XPSE_ASYM, + adv); +} + /** * genphy_config_eee_advert - disable unwanted eee mode advertisement * @phydev: target phy_device struct @@ -1715,6 +1749,54 @@ int __genphy_config_aneg(struct phy_device *phydev, bool changed) } EXPORT_SYMBOL(__genphy_config_aneg); +/** + * genphy_c37_config_aneg - restart auto-negotiation or write BMCR + * @phydev: target phy_device struct + * + * Description: If auto-negotiation is enabled, we configure the + * advertising, and then restart auto-negotiation. If it is not + * enabled, then we write the BMCR. This function is intended + * for use with Clause 37 1000Base-X mode. + */ +int genphy_c37_config_aneg(struct phy_device *phydev) +{ + int err, changed; + + if (phydev->autoneg != AUTONEG_ENABLE) + return genphy_setup_forced(phydev); + + err = phy_modify(phydev, MII_BMCR, BMCR_SPEED1000 | BMCR_SPEED100, + BMCR_SPEED1000); + if (err) + return err; + + changed = genphy_c37_config_advert(phydev); + if (changed < 0) /* error */ + return changed; + + if (!changed) { + /* Advertisement hasn't changed, but maybe aneg was never on to + * begin with? Or maybe phy was isolated? + */ + int ctl = phy_read(phydev, MII_BMCR); + + if (ctl < 0) + return ctl; + + if (!(ctl & BMCR_ANENABLE) || (ctl & BMCR_ISOLATE)) + changed = 1; /* do restart aneg */ + } + + /* Only restart aneg if we are advertising something different + * than we were before. + */ + if (changed > 0) + return genphy_restart_aneg(phydev); + + return 0; +} +EXPORT_SYMBOL(genphy_c37_config_aneg); + /** * genphy_aneg_done - return auto-negotiation status * @phydev: target phy_device struct @@ -1886,6 +1968,63 @@ int genphy_read_status(struct phy_device *phydev) } EXPORT_SYMBOL(genphy_read_status); +/** + * genphy_c37_read_status - check the link status and update current link state + * @phydev: target phy_device struct + * + * Description: Check the link, then figure out the current state + * by comparing what we advertise with what the link partner + * advertises. This function is for Clause 37 1000Base-X mode. + */ +int genphy_c37_read_status(struct phy_device *phydev) +{ + int lpa, err, old_link = phydev->link; + + /* Update the link, but return if there was an error */ + err = genphy_update_link(phydev); + if (err) + return err; + + /* why bother the PHY if nothing can have changed */ + if (phydev->autoneg == AUTONEG_ENABLE && old_link && phydev->link) + return 0; + + phydev->duplex = DUPLEX_UNKNOWN; + phydev->pause = 0; + phydev->asym_pause = 0; + + if (phydev->autoneg == AUTONEG_ENABLE && phydev->autoneg_complete) { + lpa = phy_read(phydev, MII_LPA); + if (lpa < 0) + return lpa; + + linkmode_mod_bit(ETHTOOL_LINK_MODE_Autoneg_BIT, + phydev->lp_advertising, lpa & LPA_LPACK); + linkmode_mod_bit(ETHTOOL_LINK_MODE_1000baseX_Full_BIT, + phydev->lp_advertising, lpa & LPA_1000XFULL); + linkmode_mod_bit(ETHTOOL_LINK_MODE_Pause_BIT, + phydev->lp_advertising, lpa & LPA_1000XPAUSE); + linkmode_mod_bit(ETHTOOL_LINK_MODE_Asym_Pause_BIT, + phydev->lp_advertising, + lpa & LPA_1000XPAUSE_ASYM); + + phy_resolve_aneg_linkmode(phydev); + } else if (phydev->autoneg == AUTONEG_DISABLE) { + int bmcr = phy_read(phydev, MII_BMCR); + + if (bmcr < 0) + return bmcr; + + if (bmcr & BMCR_FULLDPLX) + phydev->duplex = DUPLEX_FULL; + else + phydev->duplex = DUPLEX_HALF; + } + + return 0; +} +EXPORT_SYMBOL(genphy_c37_read_status); + /** * genphy_soft_reset - software reset the PHY via BMCR_RESET bit * @phydev: target phy_device struct -- cgit v1.2.3-59-g8ed1b