From 1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sat, 16 Apr 2005 15:20:36 -0700 Subject: Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip! --- drivers/pcmcia/sa11xx_base.h | 123 +++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 123 insertions(+) create mode 100644 drivers/pcmcia/sa11xx_base.h (limited to 'drivers/pcmcia/sa11xx_base.h') diff --git a/drivers/pcmcia/sa11xx_base.h b/drivers/pcmcia/sa11xx_base.h new file mode 100644 index 000000000000..7bc208280527 --- /dev/null +++ b/drivers/pcmcia/sa11xx_base.h @@ -0,0 +1,123 @@ +/*====================================================================== + + Device driver for the PCMCIA control functionality of StrongARM + SA-1100 microprocessors. + + The contents of this file are subject to the Mozilla Public + License Version 1.1 (the "License"); you may not use this file + except in compliance with the License. You may obtain a copy of + the License at http://www.mozilla.org/MPL/ + + Software distributed under the License is distributed on an "AS + IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or + implied. See the License for the specific language governing + rights and limitations under the License. + + The initial developer of the original code is John G. Dorsey + . Portions created by John G. Dorsey are + Copyright (C) 1999 John G. Dorsey. All Rights Reserved. + + Alternatively, the contents of this file may be used under the + terms of the GNU Public License version 2 (the "GPL"), in which + case the provisions of the GPL are applicable instead of the + above. If you wish to allow the use of your version of this file + only under the terms of the GPL and not to allow others to use + your version of this file under the MPL, indicate your decision + by deleting the provisions above and replace them with the notice + and other provisions required by the GPL. If you do not delete + the provisions above, a recipient may use your version of this + file under either the MPL or the GPL. + +======================================================================*/ + +#if !defined(_PCMCIA_SA1100_H) +# define _PCMCIA_SA1100_H + +/* SA-1100 PCMCIA Memory and I/O timing + * ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ + * The SA-1110 Developer's Manual, section 10.2.5, says the following: + * + * "To calculate the recommended BS_xx value for each address space: + * divide the command width time (the greater of twIOWR and twIORD, + * or the greater of twWE and twOE) by processor cycle time; divide + * by 2; divide again by 3 (number of BCLK's per command assertion); + * round up to the next whole number; and subtract 1." + */ + +/* MECR: Expansion Memory Configuration Register + * (SA-1100 Developers Manual, p.10-13; SA-1110 Developers Manual, p.10-24) + * + * MECR layout is: + * + * FAST1 BSM1<4:0> BSA1<4:0> BSIO1<4:0> FAST0 BSM0<4:0> BSA0<4:0> BSIO0<4:0> + * + * (This layout is actually true only for the SA-1110; the FASTn bits are + * reserved on the SA-1100.) + */ + +#define MECR_SOCKET_0_SHIFT (0) +#define MECR_SOCKET_1_SHIFT (16) + +#define MECR_BS_MASK (0x1f) +#define MECR_FAST_MODE_MASK (0x01) + +#define MECR_BSIO_SHIFT (0) +#define MECR_BSA_SHIFT (5) +#define MECR_BSM_SHIFT (10) +#define MECR_FAST_SHIFT (15) + +#define MECR_SET(mecr, sock, shift, mask, bs) \ +((mecr)=((mecr)&~(((mask)<<(shift))<<\ + ((sock)==0?MECR_SOCKET_0_SHIFT:MECR_SOCKET_1_SHIFT)))|\ + (((bs)<<(shift))<<((sock)==0?MECR_SOCKET_0_SHIFT:MECR_SOCKET_1_SHIFT))) + +#define MECR_GET(mecr, sock, shift, mask) \ +((((mecr)>>(((sock)==0)?MECR_SOCKET_0_SHIFT:MECR_SOCKET_1_SHIFT))>>\ + (shift))&(mask)) + +#define MECR_BSIO_SET(mecr, sock, bs) \ +MECR_SET((mecr), (sock), MECR_BSIO_SHIFT, MECR_BS_MASK, (bs)) + +#define MECR_BSIO_GET(mecr, sock) \ +MECR_GET((mecr), (sock), MECR_BSIO_SHIFT, MECR_BS_MASK) + +#define MECR_BSA_SET(mecr, sock, bs) \ +MECR_SET((mecr), (sock), MECR_BSA_SHIFT, MECR_BS_MASK, (bs)) + +#define MECR_BSA_GET(mecr, sock) \ +MECR_GET((mecr), (sock), MECR_BSA_SHIFT, MECR_BS_MASK) + +#define MECR_BSM_SET(mecr, sock, bs) \ +MECR_SET((mecr), (sock), MECR_BSM_SHIFT, MECR_BS_MASK, (bs)) + +#define MECR_BSM_GET(mecr, sock) \ +MECR_GET((mecr), (sock), MECR_BSM_SHIFT, MECR_BS_MASK) + +#define MECR_FAST_SET(mecr, sock, fast) \ +MECR_SET((mecr), (sock), MECR_FAST_SHIFT, MECR_FAST_MODE_MASK, (fast)) + +#define MECR_FAST_GET(mecr, sock) \ +MECR_GET((mecr), (sock), MECR_FAST_SHIFT, MECR_FAST_MODE_MASK) + + +/* This function implements the BS value calculation for setting the MECR + * using integer arithmetic: + */ +static inline unsigned int sa1100_pcmcia_mecr_bs(unsigned int pcmcia_cycle_ns, + unsigned int cpu_clock_khz){ + unsigned int t = ((pcmcia_cycle_ns * cpu_clock_khz) / 6) - 1000000; + return (t / 1000000) + (((t % 1000000) == 0) ? 0 : 1); +} + +/* This function returns the (approximate) command assertion period, in + * nanoseconds, for a given CPU clock frequency and MECR BS value: + */ +static inline unsigned int sa1100_pcmcia_cmd_time(unsigned int cpu_clock_khz, + unsigned int pcmcia_mecr_bs){ + return (((10000000 * 2) / cpu_clock_khz) * (3 * (pcmcia_mecr_bs + 1))) / 10; +} + + +extern int sa11xx_drv_pcmcia_probe(struct device *dev, struct pcmcia_low_level *ops, int first, int nr); + +#endif /* !defined(_PCMCIA_SA1100_H) */ -- cgit v1.2.3-59-g8ed1b