From 2ec3ba69faf301fb599e3651515e808e8efa533e Mon Sep 17 00:00:00 2001 From: Alexandre Bounine Date: Wed, 3 Jul 2013 15:08:50 -0700 Subject: rapidio: convert switch drivers to modules Rework RapidIO switch drivers to add an option to build them as loadable kernel modules. This patch removes RapidIO-specific vmlinux section and converts switch drivers to be compatible with LDM driver registration method. To simplify registration of device-specific callback routines this patch introduces rio_switch_ops data structure. The sw_sysfs() callback is removed from the list of device-specific operations because under the new structure its functions can be handled by switch driver's probe() and remove() routines. If a specific switch device driver is not loaded the RapidIO subsystem core will use default standard-based operations to configure a switch. Because the current implementation of RapidIO enumeration/discovery method relies on availability of device-specific operations for error management, switch device drivers must be loaded before the RapidIO enumeration/discovery starts. This patch also moves several common routines from enumeration/discovery module into the RapidIO core code to make switch-specific operations accessible to all components of RapidIO subsystem. Signed-off-by: Alexandre Bounine Cc: Matt Porter Cc: Li Yang Cc: Kumar Gala Cc: Andre van Herk Cc: Micha Nelissen Cc: Stef van Os Cc: Jean Delvare Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/rapidio/Kconfig | 5 + drivers/rapidio/rio-scan.c | 171 ++------------------- drivers/rapidio/rio-sysfs.c | 4 - drivers/rapidio/rio.c | 286 ++++++++++++++++++++++++++++++------ drivers/rapidio/rio.h | 41 +----- drivers/rapidio/switches/Kconfig | 12 +- drivers/rapidio/switches/idt_gen2.c | 98 +++++++++--- drivers/rapidio/switches/idtcps.c | 86 +++++++++-- drivers/rapidio/switches/tsi568.c | 71 +++++++-- drivers/rapidio/switches/tsi57x.c | 81 ++++++++-- 10 files changed, 544 insertions(+), 311 deletions(-) (limited to 'drivers/rapidio') diff --git a/drivers/rapidio/Kconfig b/drivers/rapidio/Kconfig index 5ab056494bbe..3e3be57e9a1a 100644 --- a/drivers/rapidio/Kconfig +++ b/drivers/rapidio/Kconfig @@ -67,4 +67,9 @@ config RAPIDIO_ENUM_BASIC endchoice +menu "RapidIO Switch drivers" + depends on RAPIDIO + source "drivers/rapidio/switches/Kconfig" + +endmenu diff --git a/drivers/rapidio/rio-scan.c b/drivers/rapidio/rio-scan.c index 4b9b15ee8596..913950212605 100644 --- a/drivers/rapidio/rio-scan.c +++ b/drivers/rapidio/rio-scan.c @@ -406,6 +406,7 @@ static struct rio_dev *rio_setup_device(struct rio_net *net, rio_mport_write_config_32(port, destid, hopcount, RIO_COMPONENT_TAG_CSR, next_comptag); rdev->comp_tag = next_comptag++; + rdev->do_enum = true; } else { rio_mport_read_config_32(port, destid, hopcount, RIO_COMPONENT_TAG_CSR, @@ -434,6 +435,7 @@ static struct rio_dev *rio_setup_device(struct rio_net *net, rswitch = rdev->rswitch; rswitch->switchid = rdev->comp_tag & RIO_CTAG_UDEVID; rswitch->port_ok = 0; + spin_lock_init(&rswitch->lock); rswitch->route_table = kzalloc(sizeof(u8)* RIO_MAX_ROUTE_ENTRIES(port->sys_size), GFP_KERNEL); @@ -445,11 +447,9 @@ static struct rio_dev *rio_setup_device(struct rio_net *net, rswitch->route_table[rdid] = RIO_INVALID_ROUTE; dev_set_name(&rdev->dev, "%02x:s:%04x", rdev->net->id, rswitch->switchid); - rio_switch_init(rdev, do_enum); - if (do_enum && rswitch->clr_table) - rswitch->clr_table(port, destid, hopcount, - RIO_GLOBAL_TABLE); + if (do_enum) + rio_route_clr_table(rdev, RIO_GLOBAL_TABLE, 0); list_add_tail(&rswitch->node, &net->switches); @@ -532,156 +532,6 @@ rio_sport_is_active(struct rio_mport *port, u16 destid, u8 hopcount, int sport) return result & RIO_PORT_N_ERR_STS_PORT_OK; } -/** - * rio_lock_device - Acquires host device lock for specified device - * @port: Master port to send transaction - * @destid: Destination ID for device/switch - * @hopcount: Hopcount to reach switch - * @wait_ms: Max wait time in msec (0 = no timeout) - * - * Attepts to acquire host device lock for specified device - * Returns 0 if device lock acquired or EINVAL if timeout expires. - */ -static int -rio_lock_device(struct rio_mport *port, u16 destid, u8 hopcount, int wait_ms) -{ - u32 result; - int tcnt = 0; - - /* Attempt to acquire device lock */ - rio_mport_write_config_32(port, destid, hopcount, - RIO_HOST_DID_LOCK_CSR, port->host_deviceid); - rio_mport_read_config_32(port, destid, hopcount, - RIO_HOST_DID_LOCK_CSR, &result); - - while (result != port->host_deviceid) { - if (wait_ms != 0 && tcnt == wait_ms) { - pr_debug("RIO: timeout when locking device %x:%x\n", - destid, hopcount); - return -EINVAL; - } - - /* Delay a bit */ - mdelay(1); - tcnt++; - /* Try to acquire device lock again */ - rio_mport_write_config_32(port, destid, - hopcount, - RIO_HOST_DID_LOCK_CSR, - port->host_deviceid); - rio_mport_read_config_32(port, destid, - hopcount, - RIO_HOST_DID_LOCK_CSR, &result); - } - - return 0; -} - -/** - * rio_unlock_device - Releases host device lock for specified device - * @port: Master port to send transaction - * @destid: Destination ID for device/switch - * @hopcount: Hopcount to reach switch - * - * Returns 0 if device lock released or EINVAL if fails. - */ -static int -rio_unlock_device(struct rio_mport *port, u16 destid, u8 hopcount) -{ - u32 result; - - /* Release device lock */ - rio_mport_write_config_32(port, destid, - hopcount, - RIO_HOST_DID_LOCK_CSR, - port->host_deviceid); - rio_mport_read_config_32(port, destid, hopcount, - RIO_HOST_DID_LOCK_CSR, &result); - if ((result & 0xffff) != 0xffff) { - pr_debug("RIO: badness when releasing device lock %x:%x\n", - destid, hopcount); - return -EINVAL; - } - - return 0; -} - -/** - * rio_route_add_entry- Add a route entry to a switch routing table - * @rdev: RIO device - * @table: Routing table ID - * @route_destid: Destination ID to be routed - * @route_port: Port number to be routed - * @lock: lock switch device flag - * - * Calls the switch specific add_entry() method to add a route entry - * on a switch. The route table can be specified using the @table - * argument if a switch has per port routing tables or the normal - * use is to specific all tables (or the global table) by passing - * %RIO_GLOBAL_TABLE in @table. Returns %0 on success or %-EINVAL - * on failure. - */ -static int -rio_route_add_entry(struct rio_dev *rdev, - u16 table, u16 route_destid, u8 route_port, int lock) -{ - int rc; - - if (lock) { - rc = rio_lock_device(rdev->net->hport, rdev->destid, - rdev->hopcount, 1000); - if (rc) - return rc; - } - - rc = rdev->rswitch->add_entry(rdev->net->hport, rdev->destid, - rdev->hopcount, table, - route_destid, route_port); - if (lock) - rio_unlock_device(rdev->net->hport, rdev->destid, - rdev->hopcount); - - return rc; -} - -/** - * rio_route_get_entry- Read a route entry in a switch routing table - * @rdev: RIO device - * @table: Routing table ID - * @route_destid: Destination ID to be routed - * @route_port: Pointer to read port number into - * @lock: lock switch device flag - * - * Calls the switch specific get_entry() method to read a route entry - * in a switch. The route table can be specified using the @table - * argument if a switch has per port routing tables or the normal - * use is to specific all tables (or the global table) by passing - * %RIO_GLOBAL_TABLE in @table. Returns %0 on success or %-EINVAL - * on failure. - */ -static int -rio_route_get_entry(struct rio_dev *rdev, u16 table, - u16 route_destid, u8 *route_port, int lock) -{ - int rc; - - if (lock) { - rc = rio_lock_device(rdev->net->hport, rdev->destid, - rdev->hopcount, 1000); - if (rc) - return rc; - } - - rc = rdev->rswitch->get_entry(rdev->net->hport, rdev->destid, - rdev->hopcount, table, - route_destid, route_port); - if (lock) - rio_unlock_device(rdev->net->hport, rdev->destid, - rdev->hopcount); - - return rc; -} - /** * rio_get_host_deviceid_lock- Reads the Host Device ID Lock CSR on a device * @port: Master port to send transaction @@ -1094,12 +944,9 @@ static void rio_update_route_tables(struct rio_net *net) sport = RIO_GET_PORT_NUM(swrdev->swpinfo); - if (rswitch->add_entry) { - rio_route_add_entry(swrdev, - RIO_GLOBAL_TABLE, destid, - sport, 0); - rswitch->route_table[destid] = sport; - } + rio_route_add_entry(swrdev, RIO_GLOBAL_TABLE, + destid, sport, 0); + rswitch->route_table[destid] = sport; } } } @@ -1115,8 +962,8 @@ static void rio_update_route_tables(struct rio_net *net) static void rio_init_em(struct rio_dev *rdev) { if (rio_is_switch(rdev) && (rdev->em_efptr) && - (rdev->rswitch->em_init)) { - rdev->rswitch->em_init(rdev); + rdev->rswitch->ops && rdev->rswitch->ops->em_init) { + rdev->rswitch->ops->em_init(rdev); } } diff --git a/drivers/rapidio/rio-sysfs.c b/drivers/rapidio/rio-sysfs.c index 66d4acd5e18f..864e52f193e1 100644 --- a/drivers/rapidio/rio-sysfs.c +++ b/drivers/rapidio/rio-sysfs.c @@ -257,8 +257,6 @@ int rio_create_sysfs_dev_files(struct rio_dev *rdev) err |= device_create_file(&rdev->dev, &dev_attr_routes); err |= device_create_file(&rdev->dev, &dev_attr_lnext); err |= device_create_file(&rdev->dev, &dev_attr_hopcount); - if (!err && rdev->rswitch->sw_sysfs) - err = rdev->rswitch->sw_sysfs(rdev, RIO_SW_SYSFS_CREATE); } if (err) @@ -281,8 +279,6 @@ void rio_remove_sysfs_dev_files(struct rio_dev *rdev) device_remove_file(&rdev->dev, &dev_attr_routes); device_remove_file(&rdev->dev, &dev_attr_lnext); device_remove_file(&rdev->dev, &dev_attr_hopcount); - if (rdev->rswitch->sw_sysfs) - rdev->rswitch->sw_sysfs(rdev, RIO_SW_SYSFS_REMOVE); } } diff --git a/drivers/rapidio/rio.c b/drivers/rapidio/rio.c index cb1c08996fbb..b17d5218005e 100644 --- a/drivers/rapidio/rio.c +++ b/drivers/rapidio/rio.c @@ -7,7 +7,6 @@ * * Copyright 2009 Integrated Device Technology, Inc. * Alex Bounine - * - Added Port-Write/Error Management initialization and handling * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the @@ -579,44 +578,6 @@ int rio_set_port_lockout(struct rio_dev *rdev, u32 pnum, int lock) } EXPORT_SYMBOL_GPL(rio_set_port_lockout); -/** - * rio_switch_init - Sets switch operations for a particular vendor switch - * @rdev: RIO device - * @do_enum: Enumeration/Discovery mode flag - * - * Searches the RIO switch ops table for known switch types. If the vid - * and did match a switch table entry, then call switch initialization - * routine to setup switch-specific routines. - */ -void rio_switch_init(struct rio_dev *rdev, int do_enum) -{ - struct rio_switch_ops *cur = __start_rio_switch_ops; - struct rio_switch_ops *end = __end_rio_switch_ops; - - while (cur < end) { - if ((cur->vid == rdev->vid) && (cur->did == rdev->did)) { - pr_debug("RIO: calling init routine for %s\n", - rio_name(rdev)); - cur->init_hook(rdev, do_enum); - break; - } - cur++; - } - - if ((cur >= end) && (rdev->pef & RIO_PEF_STD_RT)) { - pr_debug("RIO: adding STD routing ops for %s\n", - rio_name(rdev)); - rdev->rswitch->add_entry = rio_std_route_add_entry; - rdev->rswitch->get_entry = rio_std_route_get_entry; - rdev->rswitch->clr_table = rio_std_route_clr_table; - } - - if (!rdev->rswitch->add_entry || !rdev->rswitch->get_entry) - printk(KERN_ERR "RIO: missing routing ops for %s\n", - rio_name(rdev)); -} -EXPORT_SYMBOL_GPL(rio_switch_init); - /** * rio_enable_rx_tx_port - enable input receiver and output transmitter of * given port @@ -970,8 +931,8 @@ int rio_inb_pwrite_handler(union rio_pw_msg *pw_msg) /* * Process the port-write notification from switch */ - if (rdev->rswitch->em_handle) - rdev->rswitch->em_handle(rdev, portnum); + if (rdev->rswitch->ops && rdev->rswitch->ops->em_handle) + rdev->rswitch->ops->em_handle(rdev, portnum); rio_read_config_32(rdev, rdev->phys_efptr + RIO_PORT_N_ERR_STS_CSR(portnum), @@ -1207,8 +1168,9 @@ struct rio_dev *rio_get_device(u16 vid, u16 did, struct rio_dev *from) * @route_destid: destID entry in the RT * @route_port: destination port for specified destID */ -int rio_std_route_add_entry(struct rio_mport *mport, u16 destid, u8 hopcount, - u16 table, u16 route_destid, u8 route_port) +static int +rio_std_route_add_entry(struct rio_mport *mport, u16 destid, u8 hopcount, + u16 table, u16 route_destid, u8 route_port) { if (table == RIO_GLOBAL_TABLE) { rio_mport_write_config_32(mport, destid, hopcount, @@ -1234,8 +1196,9 @@ int rio_std_route_add_entry(struct rio_mport *mport, u16 destid, u8 hopcount, * @route_destid: destID entry in the RT * @route_port: returned destination port for specified destID */ -int rio_std_route_get_entry(struct rio_mport *mport, u16 destid, u8 hopcount, - u16 table, u16 route_destid, u8 *route_port) +static int +rio_std_route_get_entry(struct rio_mport *mport, u16 destid, u8 hopcount, + u16 table, u16 route_destid, u8 *route_port) { u32 result; @@ -1259,8 +1222,9 @@ int rio_std_route_get_entry(struct rio_mport *mport, u16 destid, u8 hopcount, * @hopcount: Number of switch hops to the device * @table: routing table ID (global or port-specific) */ -int rio_std_route_clr_table(struct rio_mport *mport, u16 destid, u8 hopcount, - u16 table) +static int +rio_std_route_clr_table(struct rio_mport *mport, u16 destid, u8 hopcount, + u16 table) { u32 max_destid = 0xff; u32 i, pef, id_inc = 1, ext_cfg = 0; @@ -1301,6 +1265,234 @@ int rio_std_route_clr_table(struct rio_mport *mport, u16 destid, u8 hopcount, return 0; } +/** + * rio_lock_device - Acquires host device lock for specified device + * @port: Master port to send transaction + * @destid: Destination ID for device/switch + * @hopcount: Hopcount to reach switch + * @wait_ms: Max wait time in msec (0 = no timeout) + * + * Attepts to acquire host device lock for specified device + * Returns 0 if device lock acquired or EINVAL if timeout expires. + */ +int rio_lock_device(struct rio_mport *port, u16 destid, + u8 hopcount, int wait_ms) +{ + u32 result; + int tcnt = 0; + + /* Attempt to acquire device lock */ + rio_mport_write_config_32(port, destid, hopcount, + RIO_HOST_DID_LOCK_CSR, port->host_deviceid); + rio_mport_read_config_32(port, destid, hopcount, + RIO_HOST_DID_LOCK_CSR, &result); + + while (result != port->host_deviceid) { + if (wait_ms != 0 && tcnt == wait_ms) { + pr_debug("RIO: timeout when locking device %x:%x\n", + destid, hopcount); + return -EINVAL; + } + + /* Delay a bit */ + mdelay(1); + tcnt++; + /* Try to acquire device lock again */ + rio_mport_write_config_32(port, destid, + hopcount, + RIO_HOST_DID_LOCK_CSR, + port->host_deviceid); + rio_mport_read_config_32(port, destid, + hopcount, + RIO_HOST_DID_LOCK_CSR, &result); + } + + return 0; +} +EXPORT_SYMBOL_GPL(rio_lock_device); + +/** + * rio_unlock_device - Releases host device lock for specified device + * @port: Master port to send transaction + * @destid: Destination ID for device/switch + * @hopcount: Hopcount to reach switch + * + * Returns 0 if device lock released or EINVAL if fails. + */ +int rio_unlock_device(struct rio_mport *port, u16 destid, u8 hopcount) +{ + u32 result; + + /* Release device lock */ + rio_mport_write_config_32(port, destid, + hopcount, + RIO_HOST_DID_LOCK_CSR, + port->host_deviceid); + rio_mport_read_config_32(port, destid, hopcount, + RIO_HOST_DID_LOCK_CSR, &result); + if ((result & 0xffff) != 0xffff) { + pr_debug("RIO: badness when releasing device lock %x:%x\n", + destid, hopcount); + return -EINVAL; + } + + return 0; +} +EXPORT_SYMBOL_GPL(rio_unlock_device); + +/** + * rio_route_add_entry- Add a route entry to a switch routing table + * @rdev: RIO device + * @table: Routing table ID + * @route_destid: Destination ID to be routed + * @route_port: Port number to be routed + * @lock: apply a hardware lock on switch device flag (1=lock, 0=no_lock) + * + * If available calls the switch specific add_entry() method to add a route + * entry into a switch routing table. Otherwise uses standard RT update method + * as defined by RapidIO specification. A specific routing table can be selected + * using the @table argument if a switch has per port routing tables or + * the standard (or global) table may be used by passing + * %RIO_GLOBAL_TABLE in @table. + * + * Returns %0 on success or %-EINVAL on failure. + */ +int rio_route_add_entry(struct rio_dev *rdev, + u16 table, u16 route_destid, u8 route_port, int lock) +{ + int rc = -EINVAL; + struct rio_switch_ops *ops = rdev->rswitch->ops; + + if (lock) { + rc = rio_lock_device(rdev->net->hport, rdev->destid, + rdev->hopcount, 1000); + if (rc) + return rc; + } + + spin_lock(&rdev->rswitch->lock); + + if (ops == NULL || ops->add_entry == NULL) { + rc = rio_std_route_add_entry(rdev->net->hport, rdev->destid, + rdev->hopcount, table, + route_destid, route_port); + } else if (try_module_get(ops->owner)) { + rc = ops->add_entry(rdev->net->hport, rdev->destid, + rdev->hopcount, table, route_destid, + route_port); + module_put(ops->owner); + } + + spin_unlock(&rdev->rswitch->lock); + + if (lock) + rio_unlock_device(rdev->net->hport, rdev->destid, + rdev->hopcount); + + return rc; +} +EXPORT_SYMBOL_GPL(rio_route_add_entry); + +/** + * rio_route_get_entry- Read an entry from a switch routing table + * @rdev: RIO device + * @table: Routing table ID + * @route_destid: Destination ID to be routed + * @route_port: Pointer to read port number into + * @lock: apply a hardware lock on switch device flag (1=lock, 0=no_lock) + * + * If available calls the switch specific get_entry() method to fetch a route + * entry from a switch routing table. Otherwise uses standard RT read method + * as defined by RapidIO specification. A specific routing table can be selected + * using the @table argument if a switch has per port routing tables or + * the standard (or global) table may be used by passing + * %RIO_GLOBAL_TABLE in @table. + * + * Returns %0 on success or %-EINVAL on failure. + */ +int rio_route_get_entry(struct rio_dev *rdev, u16 table, + u16 route_destid, u8 *route_port, int lock) +{ + int rc = -EINVAL; + struct rio_switch_ops *ops = rdev->rswitch->ops; + + if (lock) { + rc = rio_lock_device(rdev->net->hport, rdev->destid, + rdev->hopcount, 1000); + if (rc) + return rc; + } + + spin_lock(&rdev->rswitch->lock); + + if (ops == NULL || ops->get_entry == NULL) { + rc = rio_std_route_get_entry(rdev->net->hport, rdev->destid, + rdev->hopcount, table, + route_destid, route_port); + } else if (try_module_get(ops->owner)) { + rc = ops->get_entry(rdev->net->hport, rdev->destid, + rdev->hopcount, table, route_destid, + route_port); + module_put(ops->owner); + } + + spin_unlock(&rdev->rswitch->lock); + + if (lock) + rio_unlock_device(rdev->net->hport, rdev->destid, + rdev->hopcount); + return rc; +} +EXPORT_SYMBOL_GPL(rio_route_get_entry); + +/** + * rio_route_clr_table - Clear a switch routing table + * @rdev: RIO device + * @table: Routing table ID + * @lock: apply a hardware lock on switch device flag (1=lock, 0=no_lock) + * + * If available calls the switch specific clr_table() method to clear a switch + * routing table. Otherwise uses standard RT write method as defined by RapidIO + * specification. A specific routing table can be selected using the @table + * argument if a switch has per port routing tables or the standard (or global) + * table may be used by passing %RIO_GLOBAL_TABLE in @table. + * + * Returns %0 on success or %-EINVAL on failure. + */ +int rio_route_clr_table(struct rio_dev *rdev, u16 table, int lock) +{ + int rc = -EINVAL; + struct rio_switch_ops *ops = rdev->rswitch->ops; + + if (lock) { + rc = rio_lock_device(rdev->net->hport, rdev->destid, + rdev->hopcount, 1000); + if (rc) + return rc; + } + + spin_lock(&rdev->rswitch->lock); + + if (ops == NULL || ops->clr_table == NULL) { + rc = rio_std_route_clr_table(rdev->net->hport, rdev->destid, + rdev->hopcount, table); + } else if (try_module_get(ops->owner)) { + rc = ops->clr_table(rdev->net->hport, rdev->destid, + rdev->hopcount, table); + + module_put(ops->owner); + } + + spin_unlock(&rdev->rswitch->lock); + + if (lock) + rio_unlock_device(rdev->net->hport, rdev->destid, + rdev->hopcount); + + return rc; +} +EXPORT_SYMBOL_GPL(rio_route_clr_table); + #ifdef CONFIG_RAPIDIO_DMA_ENGINE static bool rio_chan_filter(struct dma_chan *chan, void *arg) diff --git a/drivers/rapidio/rio.h b/drivers/rapidio/rio.h index c14f864dea5c..d59587762c76 100644 --- a/drivers/rapidio/rio.h +++ b/drivers/rapidio/rio.h @@ -28,18 +28,17 @@ extern u32 rio_mport_get_efb(struct rio_mport *port, int local, u16 destid, extern int rio_mport_chk_dev_access(struct rio_mport *mport, u16 destid, u8 hopcount); extern int rio_create_sysfs_dev_files(struct rio_dev *rdev); -extern int rio_std_route_add_entry(struct rio_mport *mport, u16 destid, - u8 hopcount, u16 table, u16 route_destid, - u8 route_port); -extern int rio_std_route_get_entry(struct rio_mport *mport, u16 destid, - u8 hopcount, u16 table, u16 route_destid, - u8 *route_port); -extern int rio_std_route_clr_table(struct rio_mport *mport, u16 destid, - u8 hopcount, u16 table); +extern int rio_lock_device(struct rio_mport *port, u16 destid, + u8 hopcount, int wait_ms); +extern int rio_unlock_device(struct rio_mport *port, u16 destid, u8 hopcount); +extern int rio_route_add_entry(struct rio_dev *rdev, + u16 table, u16 route_destid, u8 route_port, int lock); +extern int rio_route_get_entry(struct rio_dev *rdev, u16 table, + u16 route_destid, u8 *route_port, int lock); +extern int rio_route_clr_table(struct rio_dev *rdev, u16 table, int lock); extern int rio_set_port_lockout(struct rio_dev *rdev, u32 pnum, int lock); extern struct rio_dev *rio_get_comptag(u32 comp_tag, struct rio_dev *from); extern int rio_add_device(struct rio_dev *rdev); -extern void rio_switch_init(struct rio_dev *rdev, int do_enum); extern int rio_enable_rx_tx_port(struct rio_mport *port, int local, u16 destid, u8 hopcount, u8 port_num); extern int rio_register_scan(int mport_id, struct rio_scan *scan_ops); @@ -51,29 +50,5 @@ extern struct rio_mport *rio_find_mport(int mport_id); extern struct device_attribute rio_dev_attrs[]; extern struct bus_attribute rio_bus_attrs[]; -extern struct rio_switch_ops __start_rio_switch_ops[]; -extern struct rio_switch_ops __end_rio_switch_ops[]; - -/* Helpers internal to the RIO core code */ -#define DECLARE_RIO_SWITCH_SECTION(section, name, vid, did, init_hook) \ - static const struct rio_switch_ops __rio_switch_##name __used \ - __section(section) = { vid, did, init_hook }; - -/** - * DECLARE_RIO_SWITCH_INIT - Registers switch initialization routine - * @vid: RIO vendor ID - * @did: RIO device ID - * @init_hook: Callback that performs switch-specific initialization - * - * Manipulating switch route tables and error management in RIO - * is switch specific. This registers a switch by vendor and device ID with - * initialization callback for setting up switch operations and (if required) - * hardware initialization. A &struct rio_switch_ops is initialized with - * pointer to the init routine and placed into a RIO-specific kernel section. - */ -#define DECLARE_RIO_SWITCH_INIT(vid, did, init_hook) \ - DECLARE_RIO_SWITCH_SECTION(.rio_switch_ops, vid##did, \ - vid, did, init_hook) - #define RIO_GET_DID(size, x) (size ? (x & 0xffff) : ((x & 0x00ff0000) >> 16)) #define RIO_SET_DID(size, x) (size ? (x & 0xffff) : ((x & 0x000000ff) << 16)) diff --git a/drivers/rapidio/switches/Kconfig b/drivers/rapidio/switches/Kconfig index 62d4a065230f..345841562f95 100644 --- a/drivers/rapidio/switches/Kconfig +++ b/drivers/rapidio/switches/Kconfig @@ -2,27 +2,23 @@ # RapidIO switches configuration # config RAPIDIO_TSI57X - bool "IDT Tsi57x SRIO switches support" - depends on RAPIDIO + tristate "IDT Tsi57x SRIO switches support" ---help--- Includes support for IDT Tsi57x family of serial RapidIO switches. config RAPIDIO_CPS_XX - bool "IDT CPS-xx SRIO switches support" - depends on RAPIDIO + tristate "IDT CPS-xx SRIO switches support" ---help--- Includes support for IDT CPS-16/12/10/8 serial RapidIO switches. config RAPIDIO_TSI568 - bool "Tsi568 SRIO switch support" - depends on RAPIDIO + tristate "Tsi568 SRIO switch support" default n ---help--- Includes support for IDT Tsi568 serial RapidIO switch. config RAPIDIO_CPS_GEN2 - bool "IDT CPS Gen.2 SRIO switch support" - depends on RAPIDIO + tristate "IDT CPS Gen.2 SRIO switch support" default n ---help--- Includes support for ITD CPS Gen.2 serial RapidIO switches. diff --git a/drivers/rapidio/switches/idt_gen2.c b/drivers/rapidio/switches/idt_gen2.c index 809b7a3336ba..00a71ebb5cac 100644 --- a/drivers/rapidio/switches/idt_gen2.c +++ b/drivers/rapidio/switches/idt_gen2.c @@ -11,6 +11,7 @@ */ #include +#include #include #include #include @@ -387,12 +388,12 @@ idtg2_show_errlog(struct device *dev, struct device_attribute *attr, char *buf) static DEVICE_ATTR(errlog, S_IRUGO, idtg2_show_errlog, NULL); -static int idtg2_sysfs(struct rio_dev *rdev, int create) +static int idtg2_sysfs(struct rio_dev *rdev, bool create) { struct device *dev = &rdev->dev; int err = 0; - if (create == RIO_SW_SYSFS_CREATE) { + if (create) { /* Initialize sysfs entries */ err = device_create_file(dev, &dev_attr_errlog); if (err) @@ -403,29 +404,90 @@ static int idtg2_sysfs(struct rio_dev *rdev, int create) return err; } -static int idtg2_switch_init(struct rio_dev *rdev, int do_enum) +static struct rio_switch_ops idtg2_switch_ops = { + .owner = THIS_MODULE, + .add_entry = idtg2_route_add_entry, + .get_entry = idtg2_route_get_entry, + .clr_table = idtg2_route_clr_table, + .set_domain = idtg2_set_domain, + .get_domain = idtg2_get_domain, + .em_init = idtg2_em_init, + .em_handle = idtg2_em_handler, +}; + +static int idtg2_probe(struct rio_dev *rdev, const struct rio_device_id *id) { pr_debug("RIO: %s for %s\n", __func__, rio_name(rdev)); - rdev->rswitch->add_entry = idtg2_route_add_entry; - rdev->rswitch->get_entry = idtg2_route_get_entry; - rdev->rswitch->clr_table = idtg2_route_clr_table; - rdev->rswitch->set_domain = idtg2_set_domain; - rdev->rswitch->get_domain = idtg2_get_domain; - rdev->rswitch->em_init = idtg2_em_init; - rdev->rswitch->em_handle = idtg2_em_handler; - rdev->rswitch->sw_sysfs = idtg2_sysfs; - - if (do_enum) { + + spin_lock(&rdev->rswitch->lock); + + if (rdev->rswitch->ops) { + spin_unlock(&rdev->rswitch->lock); + return -EINVAL; + } + + rdev->rswitch->ops = &idtg2_switch_ops; + + if (rdev->do_enum) { /* Ensure that default routing is disabled on startup */ rio_write_config_32(rdev, RIO_STD_RTE_DEFAULT_PORT, IDT_NO_ROUTE); } + /* Create device-specific sysfs attributes */ + idtg2_sysfs(rdev, true); + + spin_unlock(&rdev->rswitch->lock); return 0; } -DECLARE_RIO_SWITCH_INIT(RIO_VID_IDT, RIO_DID_IDTCPS1848, idtg2_switch_init); -DECLARE_RIO_SWITCH_INIT(RIO_VID_IDT, RIO_DID_IDTCPS1616, idtg2_switch_init); -DECLARE_RIO_SWITCH_INIT(RIO_VID_IDT, RIO_DID_IDTVPS1616, idtg2_switch_init); -DECLARE_RIO_SWITCH_INIT(RIO_VID_IDT, RIO_DID_IDTSPS1616, idtg2_switch_init); -DECLARE_RIO_SWITCH_INIT(RIO_VID_IDT, RIO_DID_IDTCPS1432, idtg2_switch_init); +static void idtg2_remove(struct rio_dev *rdev) +{ + pr_debug("RIO: %s for %s\n", __func__, rio_name(rdev)); + spin_lock(&rdev->rswitch->lock); + if (rdev->rswitch->ops != &idtg2_switch_ops) { + spin_unlock(&rdev->rswitch->lock); + return; + } + rdev->rswitch->ops = NULL; + + /* Remove device-specific sysfs attributes */ + idtg2_sysfs(rdev, false); + + spin_unlock(&rdev->rswitch->lock); +} + +static struct rio_device_id idtg2_id_table[] = { + {RIO_DEVICE(RIO_DID_IDTCPS1848, RIO_VID_IDT)}, + {RIO_DEVICE(RIO_DID_IDTCPS1616, RIO_VID_IDT)}, + {RIO_DEVICE(RIO_DID_IDTVPS1616, RIO_VID_IDT)}, + {RIO_DEVICE(RIO_DID_IDTSPS1616, RIO_VID_IDT)}, + {RIO_DEVICE(RIO_DID_IDTCPS1432, RIO_VID_IDT)}, + { 0, } /* terminate list */ +}; + +static struct rio_driver idtg2_driver = { + .name = "idt_gen2", + .id_table = idtg2_id_table, + .probe = idtg2_probe, + .remove = idtg2_remove, +}; + +static int __init idtg2_init(void) +{ + return rio_register_driver(&idtg2_driver); +} + +static void __exit idtg2_exit(void) +{ + pr_debug("RIO: %s\n", __func__); + rio_unregister_driver(&idtg2_driver); + pr_debug("RIO: %s done\n", __func__); +} + +device_initcall(idtg2_init); +module_exit(idtg2_exit); + +MODULE_DESCRIPTION("IDT CPS Gen.2 Serial RapidIO switch family driver"); +MODULE_AUTHOR("Integrated Device Technology, Inc."); +MODULE_LICENSE("GPL"); diff --git a/drivers/rapidio/switches/idtcps.c b/drivers/rapidio/switches/idtcps.c index d06ee2d44b44..7fbb60d31796 100644 --- a/drivers/rapidio/switches/idtcps.c +++ b/drivers/rapidio/switches/idtcps.c @@ -13,6 +13,7 @@ #include #include #include +#include #include "../rio.h" #define CPS_DEFAULT_ROUTE 0xde @@ -118,18 +119,31 @@ idtcps_get_domain(struct rio_mport *mport, u16 destid, u8 hopcount, return 0; } -static int idtcps_switch_init(struct rio_dev *rdev, int do_enum) +static struct rio_switch_ops idtcps_switch_ops = { + .owner = THIS_MODULE, + .add_entry = idtcps_route_add_entry, + .get_entry = idtcps_route_get_entry, + .clr_table = idtcps_route_clr_table, + .set_domain = idtcps_set_domain, + .get_domain = idtcps_get_domain, + .em_init = NULL, + .em_handle = NULL, +}; + +static int idtcps_probe(struct rio_dev *rdev, const struct rio_device_id *id) { pr_debug("RIO: %s for %s\n", __func__, rio_name(rdev)); - rdev->rswitch->add_entry = idtcps_route_add_entry; - rdev->rswitch->get_entry = idtcps_route_get_entry; - rdev->rswitch->clr_table = idtcps_route_clr_table; - rdev->rswitch->set_domain = idtcps_set_domain; - rdev->rswitch->get_domain = idtcps_get_domain; - rdev->rswitch->em_init = NULL; - rdev->rswitch->em_handle = NULL; - - if (do_enum) { + + spin_lock(&rdev->rswitch->lock); + + if (rdev->rswitch->ops) { + spin_unlock(&rdev->rswitch->lock); + return -EINVAL; + } + + rdev->rswitch->ops = &idtcps_switch_ops; + + if (rdev->do_enum) { /* set TVAL = ~50us */ rio_write_config_32(rdev, rdev->phys_efptr + RIO_PORT_LINKTO_CTL_CSR, 0x8e << 8); @@ -138,12 +152,52 @@ static int idtcps_switch_init(struct rio_dev *rdev, int do_enum) RIO_STD_RTE_DEFAULT_PORT, CPS_NO_ROUTE); } + spin_unlock(&rdev->rswitch->lock); return 0; } -DECLARE_RIO_SWITCH_INIT(RIO_VID_IDT, RIO_DID_IDTCPS6Q, idtcps_switch_init); -DECLARE_RIO_SWITCH_INIT(RIO_VID_IDT, RIO_DID_IDTCPS8, idtcps_switch_init); -DECLARE_RIO_SWITCH_INIT(RIO_VID_IDT, RIO_DID_IDTCPS10Q, idtcps_switch_init); -DECLARE_RIO_SWITCH_INIT(RIO_VID_IDT, RIO_DID_IDTCPS12, idtcps_switch_init); -DECLARE_RIO_SWITCH_INIT(RIO_VID_IDT, RIO_DID_IDTCPS16, idtcps_switch_init); -DECLARE_RIO_SWITCH_INIT(RIO_VID_IDT, RIO_DID_IDT70K200, idtcps_switch_init); +static void idtcps_remove(struct rio_dev *rdev) +{ + pr_debug("RIO: %s for %s\n", __func__, rio_name(rdev)); + spin_lock(&rdev->rswitch->lock); + if (rdev->rswitch->ops != &idtcps_switch_ops) { + spin_unlock(&rdev->rswitch->lock); + return; + } + rdev->rswitch->ops = NULL; + spin_unlock(&rdev->rswitch->lock); +} + +static struct rio_device_id idtcps_id_table[] = { + {RIO_DEVICE(RIO_DID_IDTCPS6Q, RIO_VID_IDT)}, + {RIO_DEVICE(RIO_DID_IDTCPS8, RIO_VID_IDT)}, + {RIO_DEVICE(RIO_DID_IDTCPS10Q, RIO_VID_IDT)}, + {RIO_DEVICE(RIO_DID_IDTCPS12, RIO_VID_IDT)}, + {RIO_DEVICE(RIO_DID_IDTCPS16, RIO_VID_IDT)}, + {RIO_DEVICE(RIO_DID_IDT70K200, RIO_VID_IDT)}, + { 0, } /* terminate list */ +}; + +static struct rio_driver idtcps_driver = { + .name = "idtcps", + .id_table = idtcps_id_table, + .probe = idtcps_probe, + .remove = idtcps_remove, +}; + +static int __init idtcps_init(void) +{ + return rio_register_driver(&idtcps_driver); +} + +static void __exit idtcps_exit(void) +{ + rio_unregister_driver(&idtcps_driver); +} + +device_initcall(idtcps_init); +module_exit(idtcps_exit); + +MODULE_DESCRIPTION("IDT CPS Gen.1 Serial RapidIO switch family driver"); +MODULE_AUTHOR("Integrated Device Technology, Inc."); +MODULE_LICENSE("GPL"); diff --git a/drivers/rapidio/switches/tsi568.c b/drivers/rapidio/switches/tsi568.c index 3994c00aa01f..8a43561b9d17 100644 --- a/drivers/rapidio/switches/tsi568.c +++ b/drivers/rapidio/switches/tsi568.c @@ -19,6 +19,7 @@ #include #include #include +#include #include "../rio.h" /* Global (broadcast) route registers */ @@ -129,18 +130,70 @@ tsi568_em_init(struct rio_dev *rdev) return 0; } -static int tsi568_switch_init(struct rio_dev *rdev, int do_enum) +static struct rio_switch_ops tsi568_switch_ops = { + .owner = THIS_MODULE, + .add_entry = tsi568_route_add_entry, + .get_entry = tsi568_route_get_entry, + .clr_table = tsi568_route_clr_table, + .set_domain = NULL, + .get_domain = NULL, + .em_init = tsi568_em_init, + .em_handle = NULL, +}; + +static int tsi568_probe(struct rio_dev *rdev, const struct rio_device_id *id) { pr_debug("RIO: %s for %s\n", __func__, rio_name(rdev)); - rdev->rswitch->add_entry = tsi568_route_add_entry; - rdev->rswitch->get_entry = tsi568_route_get_entry; - rdev->rswitch->clr_table = tsi568_route_clr_table; - rdev->rswitch->set_domain = NULL; - rdev->rswitch->get_domain = NULL; - rdev->rswitch->em_init = tsi568_em_init; - rdev->rswitch->em_handle = NULL; + spin_lock(&rdev->rswitch->lock); + + if (rdev->rswitch->ops) { + spin_unlock(&rdev->rswitch->lock); + return -EINVAL; + } + + rdev->rswitch->ops = &tsi568_switch_ops; + spin_unlock(&rdev->rswitch->lock); return 0; } -DECLARE_RIO_SWITCH_INIT(RIO_VID_TUNDRA, RIO_DID_TSI568, tsi568_switch_init); +static void tsi568_remove(struct rio_dev *rdev) +{ + pr_debug("RIO: %s for %s\n", __func__, rio_name(rdev)); + spin_lock(&rdev->rswitch->lock); + if (rdev->rswitch->ops != &tsi568_switch_ops) { + spin_unlock(&rdev->rswitch->lock); + return; + } + rdev->rswitch->ops = NULL; + spin_unlock(&rdev->rswitch->lock); +} + +static struct rio_device_id tsi568_id_table[] = { + {RIO_DEVICE(RIO_DID_TSI568, RIO_VID_TUNDRA)}, + { 0, } /* terminate list */ +}; + +static struct rio_driver tsi568_driver = { + .name = "tsi568", + .id_table = tsi568_id_table, + .probe = tsi568_probe, + .remove = tsi568_remove, +}; + +static int __init tsi568_init(void) +{ + return rio_register_driver(&tsi568_driver); +} + +static void __exit tsi568_exit(void) +{ + rio_unregister_driver(&tsi568_driver); +} + +device_initcall(tsi568_init); +module_exit(tsi568_exit); + +MODULE_DESCRIPTION("IDT Tsi568 Serial RapidIO switch driver"); +MODULE_AUTHOR("Integrated Device Technology, Inc."); +MODULE_LICENSE("GPL"); diff --git a/drivers/rapidio/switches/tsi57x.c b/drivers/rapidio/switches/tsi57x.c index db8b8028988d..42c8b014fe15 100644 --- a/drivers/rapidio/switches/tsi57x.c +++ b/drivers/rapidio/switches/tsi57x.c @@ -19,6 +19,7 @@ #include #include #include +#include #include "../rio.h" /* Global (broadcast) route registers */ @@ -292,27 +293,79 @@ exit_es: return 0; } -static int tsi57x_switch_init(struct rio_dev *rdev, int do_enum) +static struct rio_switch_ops tsi57x_switch_ops = { + .owner = THIS_MODULE, + .add_entry = tsi57x_route_add_entry, + .get_entry = tsi57x_route_get_entry, + .clr_table = tsi57x_route_clr_table, + .set_domain = tsi57x_set_domain, + .get_domain = tsi57x_get_domain, + .em_init = tsi57x_em_init, + .em_handle = tsi57x_em_handler, +}; + +static int tsi57x_probe(struct rio_dev *rdev, const struct rio_device_id *id) { pr_debug("RIO: %s for %s\n", __func__, rio_name(rdev)); - rdev->rswitch->add_entry = tsi57x_route_add_entry; - rdev->rswitch->get_entry = tsi57x_route_get_entry; - rdev->rswitch->clr_table = tsi57x_route_clr_table; - rdev->rswitch->set_domain = tsi57x_set_domain; - rdev->rswitch->get_domain = tsi57x_get_domain; - rdev->rswitch->em_init = tsi57x_em_init; - rdev->rswitch->em_handle = tsi57x_em_handler; - - if (do_enum) { + + spin_lock(&rdev->rswitch->lock); + + if (rdev->rswitch->ops) { + spin_unlock(&rdev->rswitch->lock); + return -EINVAL; + } + rdev->rswitch->ops = &tsi57x_switch_ops; + + if (rdev->do_enum) { /* Ensure that default routing is disabled on startup */ rio_write_config_32(rdev, RIO_STD_RTE_DEFAULT_PORT, RIO_INVALID_ROUTE); } + spin_unlock(&rdev->rswitch->lock); return 0; } -DECLARE_RIO_SWITCH_INIT(RIO_VID_TUNDRA, RIO_DID_TSI572, tsi57x_switch_init); -DECLARE_RIO_SWITCH_INIT(RIO_VID_TUNDRA, RIO_DID_TSI574, tsi57x_switch_init); -DECLARE_RIO_SWITCH_INIT(RIO_VID_TUNDRA, RIO_DID_TSI577, tsi57x_switch_init); -DECLARE_RIO_SWITCH_INIT(RIO_VID_TUNDRA, RIO_DID_TSI578, tsi57x_switch_init); +static void tsi57x_remove(struct rio_dev *rdev) +{ + pr_debug("RIO: %s for %s\n", __func__, rio_name(rdev)); + spin_lock(&rdev->rswitch->lock); + if (rdev->rswitch->ops != &tsi57x_switch_ops) { + spin_unlock(&rdev->rswitch->lock); + return; + } + rdev->rswitch->ops = NULL; + spin_unlock(&rdev->rswitch->lock); +} + +static struct rio_device_id tsi57x_id_table[] = { + {RIO_DEVICE(RIO_DID_TSI572, RIO_VID_TUNDRA)}, + {RIO_DEVICE(RIO_DID_TSI574, RIO_VID_TUNDRA)}, + {RIO_DEVICE(RIO_DID_TSI577, RIO_VID_TUNDRA)}, + {RIO_DEVICE(RIO_DID_TSI578, RIO_VID_TUNDRA)}, + { 0, } /* terminate list */ +}; + +static struct rio_driver tsi57x_driver = { + .name = "tsi57x", + .id_table = tsi57x_id_table, + .probe = tsi57x_probe, + .remove = tsi57x_remove, +}; + +static int __init tsi57x_init(void) +{ + return rio_register_driver(&tsi57x_driver); +} + +static void __exit tsi57x_exit(void) +{ + rio_unregister_driver(&tsi57x_driver); +} + +device_initcall(tsi57x_init); +module_exit(tsi57x_exit); + +MODULE_DESCRIPTION("IDT Tsi57x Serial RapidIO switch family driver"); +MODULE_AUTHOR("Integrated Device Technology, Inc."); +MODULE_LICENSE("GPL"); -- cgit v1.2.3-59-g8ed1b