From 45a91e8f767afbbffff46bf7251f81d15d121136 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Tue, 29 Mar 2016 16:33:42 -0700 Subject: regulator: core: Log when we bring constraints into range This aids in debugging problems triggered by the regulator core applying its constraints, we could potentially crash immediately after updating the voltage if the constraints are buggy. Signed-off-by: Mark Brown --- drivers/regulator/core.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers/regulator/core.c') diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c index 881c37e61f75..18dd7ee61455 100644 --- a/drivers/regulator/core.c +++ b/drivers/regulator/core.c @@ -935,6 +935,8 @@ static int machine_constraints_voltage(struct regulator_dev *rdev, } if (target_min != current_uV || target_max != current_uV) { + rdev_info(rdev, "Bringing %duV into %d-%duV\n", + current_uV, target_min, target_max); ret = _regulator_do_set_voltage( rdev, target_min, target_max); if (ret < 0) { -- cgit v1.2.3-59-g8ed1b From 2d80a91b2f2a96f38877bc328dac135d69564911 Mon Sep 17 00:00:00 2001 From: Richard Fitzgerald Date: Thu, 21 Apr 2016 17:23:21 +0100 Subject: regulator: core: Add debugfs to show constraint flags There are debugfs entries for voltage and current, but not for the constraint flags. It's useful for debugging to be able to see what these flags are so this patch adds a new debugfs file. We can't use debugfs_create_bool for this because the flags are bitfields, so as this needs a special read callback they have been collected into a single file that lists all the flags. Signed-off-by: Richard Fitzgerald Signed-off-by: Mark Brown --- drivers/regulator/core.c | 52 ++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 52 insertions(+) (limited to 'drivers/regulator/core.c') diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c index e0b764284773..73381752ff78 100644 --- a/drivers/regulator/core.c +++ b/drivers/regulator/core.c @@ -1272,6 +1272,55 @@ static void unset_regulator_supplies(struct regulator_dev *rdev) } } +#ifdef CONFIG_DEBUG_FS +static ssize_t constraint_flags_read_file(struct file *file, + char __user *user_buf, + size_t count, loff_t *ppos) +{ + const struct regulator *regulator = file->private_data; + const struct regulation_constraints *c = regulator->rdev->constraints; + char *buf; + ssize_t ret; + + if (!c) + return 0; + + buf = kmalloc(PAGE_SIZE, GFP_KERNEL); + if (!buf) + return -ENOMEM; + + ret = snprintf(buf, PAGE_SIZE, + "always_on: %u\n" + "boot_on: %u\n" + "apply_uV: %u\n" + "ramp_disable: %u\n" + "soft_start: %u\n" + "pull_down: %u\n" + "over_current_protection: %u\n", + c->always_on, + c->boot_on, + c->apply_uV, + c->ramp_disable, + c->soft_start, + c->pull_down, + c->over_current_protection); + + ret = simple_read_from_buffer(user_buf, count, ppos, buf, ret); + kfree(buf); + + return ret; +} + +#endif + +static const struct file_operations constraint_flags_fops = { +#ifdef CONFIG_DEBUG_FS + .open = simple_open, + .read = constraint_flags_read_file, + .llseek = default_llseek, +#endif +}; + #define REG_STR_SIZE 64 static struct regulator *create_regulator(struct regulator_dev *rdev, @@ -1327,6 +1376,9 @@ static struct regulator *create_regulator(struct regulator_dev *rdev, ®ulator->min_uV); debugfs_create_u32("max_uV", 0444, regulator->debugfs, ®ulator->max_uV); + debugfs_create_file("constraint_flags", 0444, + regulator->debugfs, regulator, + &constraint_flags_fops); } /* -- cgit v1.2.3-59-g8ed1b From 8a34e979f684aa13e6c4bf23b394cca9dfabf4a9 Mon Sep 17 00:00:00 2001 From: WEN Pingbo Date: Sat, 23 Apr 2016 15:11:05 +0800 Subject: regulator: refactor valid_ops_mask checking code To make the code more compat and centralized, this patch add a unified function - regulator_ops_is_valid. So we can add some extra checking code easily later. Signed-off-by: WEN Pingbo Signed-off-by: Mark Brown --- drivers/regulator/core.c | 88 ++++++++++++++++-------------------------------- 1 file changed, 29 insertions(+), 59 deletions(-) (limited to 'drivers/regulator/core.c') diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c index 18dd7ee61455..bca9167d8c43 100644 --- a/drivers/regulator/core.c +++ b/drivers/regulator/core.c @@ -132,6 +132,19 @@ static bool have_full_constraints(void) return has_full_constraints || of_have_populated_dt(); } +static bool regulator_ops_is_valid(struct regulator_dev *rdev, int ops) +{ + if (!rdev->constraints) { + rdev_err(rdev, "no constraints\n"); + return false; + } + + if (rdev->constraints->valid_ops_mask & ops) + return true; + + return false; +} + static inline struct regulator_dev *rdev_get_supply(struct regulator_dev *rdev) { if (rdev && rdev->supply) @@ -198,28 +211,13 @@ static struct device_node *of_get_regulator(struct device *dev, const char *supp return regnode; } -static int _regulator_can_change_status(struct regulator_dev *rdev) -{ - if (!rdev->constraints) - return 0; - - if (rdev->constraints->valid_ops_mask & REGULATOR_CHANGE_STATUS) - return 1; - else - return 0; -} - /* Platform voltage constraint check */ static int regulator_check_voltage(struct regulator_dev *rdev, int *min_uV, int *max_uV) { BUG_ON(*min_uV > *max_uV); - if (!rdev->constraints) { - rdev_err(rdev, "no constraints\n"); - return -ENODEV; - } - if (!(rdev->constraints->valid_ops_mask & REGULATOR_CHANGE_VOLTAGE)) { + if (!regulator_ops_is_valid(rdev, REGULATOR_CHANGE_VOLTAGE)) { rdev_err(rdev, "voltage operation not allowed\n"); return -EPERM; } @@ -275,11 +273,7 @@ static int regulator_check_current_limit(struct regulator_dev *rdev, { BUG_ON(*min_uA > *max_uA); - if (!rdev->constraints) { - rdev_err(rdev, "no constraints\n"); - return -ENODEV; - } - if (!(rdev->constraints->valid_ops_mask & REGULATOR_CHANGE_CURRENT)) { + if (!regulator_ops_is_valid(rdev, REGULATOR_CHANGE_CURRENT)) { rdev_err(rdev, "current operation not allowed\n"); return -EPERM; } @@ -312,11 +306,7 @@ static int regulator_mode_constrain(struct regulator_dev *rdev, int *mode) return -EINVAL; } - if (!rdev->constraints) { - rdev_err(rdev, "no constraints\n"); - return -ENODEV; - } - if (!(rdev->constraints->valid_ops_mask & REGULATOR_CHANGE_MODE)) { + if (!regulator_ops_is_valid(rdev, REGULATOR_CHANGE_MODE)) { rdev_err(rdev, "mode operation not allowed\n"); return -EPERM; } @@ -333,20 +323,6 @@ static int regulator_mode_constrain(struct regulator_dev *rdev, int *mode) return -EINVAL; } -/* dynamic regulator mode switching constraint check */ -static int regulator_check_drms(struct regulator_dev *rdev) -{ - if (!rdev->constraints) { - rdev_err(rdev, "no constraints\n"); - return -ENODEV; - } - if (!(rdev->constraints->valid_ops_mask & REGULATOR_CHANGE_DRMS)) { - rdev_dbg(rdev, "drms operation not allowed\n"); - return -EPERM; - } - return 0; -} - static ssize_t regulator_uV_show(struct device *dev, struct device_attribute *attr, char *buf) { @@ -692,8 +668,7 @@ static int drms_uA_update(struct regulator_dev *rdev) * first check to see if we can set modes at all, otherwise just * tell the consumer everything is OK. */ - err = regulator_check_drms(rdev); - if (err < 0) + if (!regulator_ops_is_valid(rdev, REGULATOR_CHANGE_DRMS)) return 0; if (!rdev->desc->ops->get_optimum_mode && @@ -893,7 +868,7 @@ static void print_constraints(struct regulator_dev *rdev) rdev_dbg(rdev, "%s\n", buf); if ((constraints->min_uV != constraints->max_uV) && - !(constraints->valid_ops_mask & REGULATOR_CHANGE_VOLTAGE)) + !regulator_ops_is_valid(rdev, REGULATOR_CHANGE_VOLTAGE)) rdev_warn(rdev, "Voltage range but no REGULATOR_CHANGE_VOLTAGE\n"); } @@ -1354,7 +1329,7 @@ static struct regulator *create_regulator(struct regulator_dev *rdev, * it is then we don't need to do nearly so much work for * enable/disable calls. */ - if (!_regulator_can_change_status(rdev) && + if (!regulator_ops_is_valid(rdev, REGULATOR_CHANGE_STATUS) && _regulator_is_enabled(rdev)) regulator->always_on = true; @@ -2131,15 +2106,15 @@ static int _regulator_enable(struct regulator_dev *rdev) lockdep_assert_held_once(&rdev->mutex); /* check voltage and requested load before enabling */ - if (rdev->constraints && - (rdev->constraints->valid_ops_mask & REGULATOR_CHANGE_DRMS)) + if (regulator_ops_is_valid(rdev, REGULATOR_CHANGE_DRMS)) drms_uA_update(rdev); if (rdev->use_count == 0) { /* The regulator may on if it's not switchable or left on */ ret = _regulator_is_enabled(rdev); if (ret == -EINVAL || ret == 0) { - if (!_regulator_can_change_status(rdev)) + if (!regulator_ops_is_valid(rdev, + REGULATOR_CHANGE_STATUS)) return -EPERM; ret = _regulator_do_enable(rdev); @@ -2241,7 +2216,7 @@ static int _regulator_disable(struct regulator_dev *rdev) (rdev->constraints && !rdev->constraints->always_on)) { /* we are last user */ - if (_regulator_can_change_status(rdev)) { + if (regulator_ops_is_valid(rdev, REGULATOR_CHANGE_STATUS)) { ret = _notifier_call_chain(rdev, REGULATOR_EVENT_PRE_DISABLE, NULL); @@ -2262,10 +2237,7 @@ static int _regulator_disable(struct regulator_dev *rdev) rdev->use_count = 0; } else if (rdev->use_count > 1) { - - if (rdev->constraints && - (rdev->constraints->valid_ops_mask & - REGULATOR_CHANGE_DRMS)) + if (regulator_ops_is_valid(rdev, REGULATOR_CHANGE_DRMS)) drms_uA_update(rdev); rdev->use_count--; @@ -2509,8 +2481,7 @@ int regulator_can_change_voltage(struct regulator *regulator) { struct regulator_dev *rdev = regulator->rdev; - if (rdev->constraints && - (rdev->constraints->valid_ops_mask & REGULATOR_CHANGE_VOLTAGE)) { + if (regulator_ops_is_valid(rdev, REGULATOR_CHANGE_VOLTAGE)) { if (rdev->desc->n_voltages - rdev->desc->linear_min_sel > 1) return 1; @@ -2664,7 +2635,7 @@ int regulator_is_supported_voltage(struct regulator *regulator, int i, voltages, ret; /* If we can't change voltage check the current voltage */ - if (!(rdev->constraints->valid_ops_mask & REGULATOR_CHANGE_VOLTAGE)) { + if (!regulator_ops_is_valid(rdev, REGULATOR_CHANGE_VOLTAGE)) { ret = regulator_get_voltage(regulator); if (ret >= 0) return min_uV <= ret && ret <= max_uV; @@ -2870,7 +2841,7 @@ static int regulator_set_voltage_unlocked(struct regulator *regulator, * return successfully even though the regulator does not support * changing the voltage. */ - if (!(rdev->constraints->valid_ops_mask & REGULATOR_CHANGE_VOLTAGE)) { + if (!regulator_ops_is_valid(rdev, REGULATOR_CHANGE_VOLTAGE)) { current_uV = _regulator_get_voltage(rdev); if (min_uV <= current_uV && current_uV <= max_uV) { regulator->min_uV = min_uV; @@ -3385,8 +3356,7 @@ int regulator_allow_bypass(struct regulator *regulator, bool enable) if (!rdev->desc->ops->set_bypass) return 0; - if (rdev->constraints && - !(rdev->constraints->valid_ops_mask & REGULATOR_CHANGE_BYPASS)) + if (!regulator_ops_is_valid(rdev, REGULATOR_CHANGE_BYPASS)) return 0; mutex_lock(&rdev->mutex); @@ -4406,7 +4376,7 @@ static int __init regulator_late_cleanup(struct device *dev, void *data) if (c && c->always_on) return 0; - if (c && !(c->valid_ops_mask & REGULATOR_CHANGE_STATUS)) + if (!regulator_ops_is_valid(rdev, REGULATOR_CHANGE_STATUS)) return 0; mutex_lock(&rdev->mutex); -- cgit v1.2.3-59-g8ed1b