From 67823d9dadd4dddee4b6bd075f6852b6ade5604a Mon Sep 17 00:00:00 2001
From: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Date: Tue, 27 Apr 2021 14:07:11 +0100
Subject: regulator: Add a routine to set the current limit for QCOM PMIC VBUS

Add hooks to regulator_get_current_limit_regmap() and
regulator_set_current_limit_regmap() with an accompanying map of amperages.

This lets us use the existing helper functions to map requested current
settings to register bit-map/indicies.

This change is required to elevate the default 2 Amps set by the bootloader
to 3 Amps or indeed to constrain the value lower as the system design may
dictate.

The valid range is 500 mA to 3 A in increments of 500 mA.

Cc: Mark Brown <broonie@kernel.org>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Link: https://lore.kernel.org/r/20210427130712.2005456-2-bryan.odonoghue@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
---
 drivers/regulator/qcom_usb_vbus-regulator.c | 12 ++++++++++++
 1 file changed, 12 insertions(+)

(limited to 'drivers/regulator')

diff --git a/drivers/regulator/qcom_usb_vbus-regulator.c b/drivers/regulator/qcom_usb_vbus-regulator.c
index 457788b50572..2e627c2b6c51 100644
--- a/drivers/regulator/qcom_usb_vbus-regulator.c
+++ b/drivers/regulator/qcom_usb_vbus-regulator.c
@@ -16,13 +16,21 @@
 
 #define CMD_OTG				0x40
 #define OTG_EN				BIT(0)
+#define OTG_CURRENT_LIMIT_CFG		0x52
+#define OTG_CURRENT_LIMIT_MASK		GENMASK(2, 0)
 #define OTG_CFG				0x53
 #define OTG_EN_SRC_CFG			BIT(1)
 
+static const unsigned int curr_table[] = {
+	500000, 1000000, 1500000, 2000000, 2500000, 3000000,
+};
+
 static const struct regulator_ops qcom_usb_vbus_reg_ops = {
 	.enable = regulator_enable_regmap,
 	.disable = regulator_disable_regmap,
 	.is_enabled = regulator_is_enabled_regmap,
+	.get_current_limit = regulator_get_current_limit_regmap,
+	.set_current_limit = regulator_set_current_limit_regmap,
 };
 
 static struct regulator_desc qcom_usb_vbus_rdesc = {
@@ -30,6 +38,8 @@ static struct regulator_desc qcom_usb_vbus_rdesc = {
 	.ops = &qcom_usb_vbus_reg_ops,
 	.owner = THIS_MODULE,
 	.type = REGULATOR_VOLTAGE,
+	.curr_table = curr_table,
+	.n_current_limits = ARRAY_SIZE(curr_table),
 };
 
 static int qcom_usb_vbus_regulator_probe(struct platform_device *pdev)
@@ -61,6 +71,8 @@ static int qcom_usb_vbus_regulator_probe(struct platform_device *pdev)
 
 	qcom_usb_vbus_rdesc.enable_reg = base + CMD_OTG;
 	qcom_usb_vbus_rdesc.enable_mask = OTG_EN;
+	qcom_usb_vbus_rdesc.csel_reg = base + OTG_CURRENT_LIMIT_CFG;
+	qcom_usb_vbus_rdesc.csel_mask = OTG_CURRENT_LIMIT_MASK;
 	config.dev = dev;
 	config.init_data = init_data;
 	config.of_node = dev->of_node;
-- 
cgit v1.2.3-59-g8ed1b


From 8c816d56a2a4e757bb121d1af4c04f47ac0572d3 Mon Sep 17 00:00:00 2001
From: Bartosz Dudziak <bartosz.dudziak@snejp.pl>
Date: Sun, 2 May 2021 13:53:04 +0200
Subject: regulator: qcom_smd: Add PM8226 regulator support

Add support for PM8226 regulator which is commonly used with MSM8226 SoCs.

Signed-off-by: Bartosz Dudziak <bartosz.dudziak@snejp.pl>
Link: https://lore.kernel.org/r/20210502115304.8570-2-bartosz.dudziak@snejp.pl
Signed-off-by: Mark Brown <broonie@kernel.org>
---
 drivers/regulator/qcom_smd-regulator.c | 83 ++++++++++++++++++++++++++++++++++
 1 file changed, 83 insertions(+)

(limited to 'drivers/regulator')

diff --git a/drivers/regulator/qcom_smd-regulator.c b/drivers/regulator/qcom_smd-regulator.c
index bb944ee5fe3b..05df7b00e3b1 100644
--- a/drivers/regulator/qcom_smd-regulator.c
+++ b/drivers/regulator/qcom_smd-regulator.c
@@ -251,6 +251,50 @@ static const struct regulator_desc pma8084_switch = {
 	.ops = &rpm_switch_ops,
 };
 
+static const struct regulator_desc pm8226_hfsmps = {
+	.linear_ranges = (struct linear_range[]) {
+		REGULATOR_LINEAR_RANGE(375000,   0,  95, 12500),
+		REGULATOR_LINEAR_RANGE(1575000, 96, 158, 25000),
+	},
+	.n_linear_ranges = 2,
+	.n_voltages = 159,
+	.ops = &rpm_smps_ldo_ops,
+};
+
+static const struct regulator_desc pm8226_ftsmps = {
+	.linear_ranges = (struct linear_range[]) {
+		REGULATOR_LINEAR_RANGE(350000,    0, 184,  5000),
+		REGULATOR_LINEAR_RANGE(1280000, 185, 261, 10000),
+	},
+	.n_linear_ranges = 2,
+	.n_voltages = 262,
+	.ops = &rpm_smps_ldo_ops,
+};
+
+static const struct regulator_desc pm8226_pldo = {
+	.linear_ranges = (struct linear_range[]) {
+		REGULATOR_LINEAR_RANGE(750000,    0,  63, 12500),
+		REGULATOR_LINEAR_RANGE(1550000,  64, 126, 25000),
+		REGULATOR_LINEAR_RANGE(3100000, 127, 163, 50000),
+	},
+	.n_linear_ranges = 3,
+	.n_voltages = 164,
+	.ops = &rpm_smps_ldo_ops,
+};
+
+static const struct regulator_desc pm8226_nldo = {
+	.linear_ranges = (struct linear_range[]) {
+		REGULATOR_LINEAR_RANGE(750000, 0, 63, 12500),
+	},
+	.n_linear_ranges = 1,
+	.n_voltages = 64,
+	.ops = &rpm_smps_ldo_ops,
+};
+
+static const struct regulator_desc pm8226_switch = {
+	.ops = &rpm_switch_ops,
+};
+
 static const struct regulator_desc pm8x41_hfsmps = {
 	.linear_ranges = (struct linear_range[]) {
 		REGULATOR_LINEAR_RANGE( 375000,  0,  95, 12500),
@@ -746,6 +790,44 @@ static const struct rpm_regulator_data rpm_pm8916_regulators[] = {
 	{}
 };
 
+static const struct rpm_regulator_data rpm_pm8226_regulators[] = {
+	{ "s1", QCOM_SMD_RPM_SMPA, 1, &pm8226_hfsmps, "vdd_s1" },
+	{ "s2", QCOM_SMD_RPM_SMPA, 2, &pm8226_ftsmps, "vdd_s2" },
+	{ "s3", QCOM_SMD_RPM_SMPA, 3, &pm8226_hfsmps, "vdd_s3" },
+	{ "s4", QCOM_SMD_RPM_SMPA, 4, &pm8226_hfsmps, "vdd_s4" },
+	{ "s5", QCOM_SMD_RPM_SMPA, 5, &pm8226_hfsmps, "vdd_s5" },
+	{ "l1", QCOM_SMD_RPM_LDOA, 1, &pm8226_nldo, "vdd_l1_l2_l4_l5" },
+	{ "l2", QCOM_SMD_RPM_LDOA, 2, &pm8226_nldo, "vdd_l1_l2_l4_l5" },
+	{ "l3", QCOM_SMD_RPM_LDOA, 3, &pm8226_nldo, "vdd_l3_l24_l26" },
+	{ "l4", QCOM_SMD_RPM_LDOA, 4, &pm8226_nldo, "vdd_l1_l2_l4_l5" },
+	{ "l5", QCOM_SMD_RPM_LDOA, 5, &pm8226_nldo, "vdd_l1_l2_l4_l5" },
+	{ "l6", QCOM_SMD_RPM_LDOA, 6, &pm8226_pldo, "vdd_l6_l7_l8_l9_l27" },
+	{ "l7", QCOM_SMD_RPM_LDOA, 7, &pm8226_pldo, "vdd_l6_l7_l8_l9_l27" },
+	{ "l8", QCOM_SMD_RPM_LDOA, 8, &pm8226_pldo, "vdd_l6_l7_l8_l9_l27" },
+	{ "l9", QCOM_SMD_RPM_LDOA, 9, &pm8226_pldo, "vdd_l6_l7_l8_l9_l27" },
+	{ "l10", QCOM_SMD_RPM_LDOA, 10, &pm8226_pldo, "vdd_l10_l11_l13" },
+	{ "l11", QCOM_SMD_RPM_LDOA, 11, &pm8226_pldo, "vdd_l10_l11_l13" },
+	{ "l12", QCOM_SMD_RPM_LDOA, 12, &pm8226_pldo, "vdd_l12_l14" },
+	{ "l13", QCOM_SMD_RPM_LDOA, 13, &pm8226_pldo, "vdd_l10_l11_l13" },
+	{ "l14", QCOM_SMD_RPM_LDOA, 14, &pm8226_pldo, "vdd_l12_l14" },
+	{ "l15", QCOM_SMD_RPM_LDOA, 15, &pm8226_pldo, "vdd_l15_l16_l17_l18" },
+	{ "l16", QCOM_SMD_RPM_LDOA, 16, &pm8226_pldo, "vdd_l15_l16_l17_l18" },
+	{ "l17", QCOM_SMD_RPM_LDOA, 17, &pm8226_pldo, "vdd_l15_l16_l17_l18" },
+	{ "l18", QCOM_SMD_RPM_LDOA, 18, &pm8226_pldo, "vdd_l15_l16_l17_l18" },
+	{ "l19", QCOM_SMD_RPM_LDOA, 19, &pm8226_pldo, "vdd_l19_l20_l21_l22_l23_l28" },
+	{ "l20", QCOM_SMD_RPM_LDOA, 20, &pm8226_pldo, "vdd_l19_l20_l21_l22_l23_l28" },
+	{ "l21", QCOM_SMD_RPM_LDOA, 21, &pm8226_pldo, "vdd_l19_l20_l21_l22_l23_l28" },
+	{ "l22", QCOM_SMD_RPM_LDOA, 22, &pm8226_pldo, "vdd_l19_l20_l21_l22_l23_l28" },
+	{ "l23", QCOM_SMD_RPM_LDOA, 23, &pm8226_pldo, "vdd_l19_l20_l21_l22_l23_l28" },
+	{ "l24", QCOM_SMD_RPM_LDOA, 24, &pm8226_nldo, "vdd_l3_l24_l26" },
+	{ "l25", QCOM_SMD_RPM_LDOA, 25, &pm8226_pldo, "vdd_l25" },
+	{ "l26", QCOM_SMD_RPM_LDOA, 26, &pm8226_nldo, "vdd_l3_l24_l26" },
+	{ "l27", QCOM_SMD_RPM_LDOA, 27, &pm8226_pldo, "vdd_l6_l7_l8_l9_l27" },
+	{ "l28", QCOM_SMD_RPM_LDOA, 28, &pm8226_pldo, "vdd_l19_l20_l21_l22_l23_l28" },
+	{ "lvs1", QCOM_SMD_RPM_VSA, 1, &pm8226_switch, "vdd_lvs1" },
+	{}
+};
+
 static const struct rpm_regulator_data rpm_pm8941_regulators[] = {
 	{ "s1", QCOM_SMD_RPM_SMPA, 1, &pm8x41_hfsmps, "vdd_s1" },
 	{ "s2", QCOM_SMD_RPM_SMPA, 2, &pm8x41_hfsmps, "vdd_s2" },
@@ -1092,6 +1174,7 @@ static const struct of_device_id rpm_of_match[] = {
 	{ .compatible = "qcom,rpm-mp5496-regulators", .data = &rpm_mp5496_regulators },
 	{ .compatible = "qcom,rpm-pm8841-regulators", .data = &rpm_pm8841_regulators },
 	{ .compatible = "qcom,rpm-pm8916-regulators", .data = &rpm_pm8916_regulators },
+	{ .compatible = "qcom,rpm-pm8226-regulators", .data = &rpm_pm8226_regulators },
 	{ .compatible = "qcom,rpm-pm8941-regulators", .data = &rpm_pm8941_regulators },
 	{ .compatible = "qcom,rpm-pm8950-regulators", .data = &rpm_pm8950_regulators },
 	{ .compatible = "qcom,rpm-pm8953-regulators", .data = &rpm_pm8953_regulators },
-- 
cgit v1.2.3-59-g8ed1b


From 4446e6f3bd5c97c312833b445d0eb2ea638c7e98 Mon Sep 17 00:00:00 2001
From: Axel Lin <axel.lin@ingics.com>
Date: Fri, 30 Apr 2021 16:55:55 +0800
Subject: regulator: hi6421v600: Remove unneeded *pmic from struct
 hi6421_spmi_reg_info

Use rdev->regmap instead of pmic->regmap.
With this change, hi6421_spmi_regulator_disable can be removed and use
regulator_disable_regmap instead.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Link: https://lore.kernel.org/r/20210430085555.1127994-1-axel.lin@ingics.com
Signed-off-by: Mark Brown <broonie@kernel.org>
---
 drivers/regulator/hi6421v600-regulator.c | 22 ++++------------------
 1 file changed, 4 insertions(+), 18 deletions(-)

(limited to 'drivers/regulator')

diff --git a/drivers/regulator/hi6421v600-regulator.c b/drivers/regulator/hi6421v600-regulator.c
index f6a14e9c3cbf..feddb0b5d4f1 100644
--- a/drivers/regulator/hi6421v600-regulator.c
+++ b/drivers/regulator/hi6421v600-regulator.c
@@ -18,7 +18,6 @@
 
 struct hi6421_spmi_reg_info {
 	struct regulator_desc	desc;
-	struct hi6421_spmi_pmic *pmic;
 	u8			eco_mode_mask;
 	u32			eco_uA;
 
@@ -98,13 +97,12 @@ static const unsigned int ldo34_voltages[] = {
 static int hi6421_spmi_regulator_enable(struct regulator_dev *rdev)
 {
 	struct hi6421_spmi_reg_info *sreg = rdev_get_drvdata(rdev);
-	struct hi6421_spmi_pmic *pmic = sreg->pmic;
 	int ret;
 
 	/* cannot enable more than one regulator at one time */
 	mutex_lock(&sreg->enable_mutex);
 
-	ret = regmap_update_bits(pmic->regmap, rdev->desc->enable_reg,
+	ret = regmap_update_bits(rdev->regmap, rdev->desc->enable_reg,
 				 rdev->desc->enable_mask,
 				 rdev->desc->enable_mask);
 
@@ -116,22 +114,12 @@ static int hi6421_spmi_regulator_enable(struct regulator_dev *rdev)
 	return ret;
 }
 
-static int hi6421_spmi_regulator_disable(struct regulator_dev *rdev)
-{
-	struct hi6421_spmi_reg_info *sreg = rdev_get_drvdata(rdev);
-	struct hi6421_spmi_pmic *pmic = sreg->pmic;
-
-	return regmap_update_bits(pmic->regmap, rdev->desc->enable_reg,
-				  rdev->desc->enable_mask, 0);
-}
-
 static unsigned int hi6421_spmi_regulator_get_mode(struct regulator_dev *rdev)
 {
 	struct hi6421_spmi_reg_info *sreg = rdev_get_drvdata(rdev);
-	struct hi6421_spmi_pmic *pmic = sreg->pmic;
 	u32 reg_val;
 
-	regmap_read(pmic->regmap, rdev->desc->enable_reg, &reg_val);
+	regmap_read(rdev->regmap, rdev->desc->enable_reg, &reg_val);
 
 	if (reg_val & sreg->eco_mode_mask)
 		return REGULATOR_MODE_IDLE;
@@ -143,7 +131,6 @@ static int hi6421_spmi_regulator_set_mode(struct regulator_dev *rdev,
 					  unsigned int mode)
 {
 	struct hi6421_spmi_reg_info *sreg = rdev_get_drvdata(rdev);
-	struct hi6421_spmi_pmic *pmic = sreg->pmic;
 	u32 val;
 
 	switch (mode) {
@@ -157,7 +144,7 @@ static int hi6421_spmi_regulator_set_mode(struct regulator_dev *rdev,
 		return -EINVAL;
 	}
 
-	return regmap_update_bits(pmic->regmap, rdev->desc->enable_reg,
+	return regmap_update_bits(rdev->regmap, rdev->desc->enable_reg,
 				  sreg->eco_mode_mask, val);
 }
 
@@ -177,7 +164,7 @@ hi6421_spmi_regulator_get_optimum_mode(struct regulator_dev *rdev,
 static const struct regulator_ops hi6421_spmi_ldo_rops = {
 	.is_enabled = regulator_is_enabled_regmap,
 	.enable = hi6421_spmi_regulator_enable,
-	.disable = hi6421_spmi_regulator_disable,
+	.disable = regulator_disable_regmap,
 	.list_voltage = regulator_list_voltage_table,
 	.map_voltage = regulator_map_voltage_iterate,
 	.get_voltage_sel = regulator_get_voltage_sel_regmap,
@@ -258,7 +245,6 @@ static int hi6421_spmi_regulator_probe(struct platform_device *pdev)
 	if (!sreg)
 		return -ENOMEM;
 
-	sreg->pmic = pmic;
 	mutex_init(&sreg->enable_mutex);
 
 	for (i = 0; i < ARRAY_SIZE(regulator_info); i++) {
-- 
cgit v1.2.3-59-g8ed1b


From d019f38a1af3c6015cde6a47951a3ec43beeed80 Mon Sep 17 00:00:00 2001
From: Zou Wei <zou_wei@huawei.com>
Date: Tue, 11 May 2021 11:53:18 +0800
Subject: regulator: uniphier: Add missing MODULE_DEVICE_TABLE

This patch adds missing MODULE_DEVICE_TABLE definition which generates
correct modalias for automatic loading of this driver when it is built
as an external module.

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zou Wei <zou_wei@huawei.com>
Link: https://lore.kernel.org/r/1620705198-104566-1-git-send-email-zou_wei@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
---
 drivers/regulator/uniphier-regulator.c | 1 +
 1 file changed, 1 insertion(+)

(limited to 'drivers/regulator')

diff --git a/drivers/regulator/uniphier-regulator.c b/drivers/regulator/uniphier-regulator.c
index 2e02e26b516c..e75b0973e325 100644
--- a/drivers/regulator/uniphier-regulator.c
+++ b/drivers/regulator/uniphier-regulator.c
@@ -201,6 +201,7 @@ static const struct of_device_id uniphier_regulator_match[] = {
 	},
 	{ /* Sentinel */ },
 };
+MODULE_DEVICE_TABLE(of, uniphier_regulator_match);
 
 static struct platform_driver uniphier_regulator_driver = {
 	.probe = uniphier_regulator_probe,
-- 
cgit v1.2.3-59-g8ed1b


From d4db69eba290732357f03ba0a14350b81f778290 Mon Sep 17 00:00:00 2001
From: Peter Geis <pgwipeout@gmail.com>
Date: Tue, 11 May 2021 17:13:33 -0400
Subject: regulator: fan53555: fix TCS4525 voltage calulation

The TCS4525 has 128 voltage steps. With the calculation set to 127 the
most significant bit is disregarded which leads to a miscalculation of
the voltage by about 200mv.

Fix the calculation to end deadlock on the rk3566-quartz64 which uses
this as the cpu regulator.

Fixes: 914df8faa7d6 ("regulator: fan53555: Add TCS4525 DCDC support")
Signed-off-by: Peter Geis <pgwipeout@gmail.com>
Link: https://lore.kernel.org/r/20210511211335.2935163-2-pgwipeout@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
---
 drivers/regulator/fan53555.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

(limited to 'drivers/regulator')

diff --git a/drivers/regulator/fan53555.c b/drivers/regulator/fan53555.c
index f3918f03aaf3..26f06f685b1b 100644
--- a/drivers/regulator/fan53555.c
+++ b/drivers/regulator/fan53555.c
@@ -55,7 +55,6 @@
 
 #define FAN53555_NVOLTAGES	64	/* Numbers of voltages */
 #define FAN53526_NVOLTAGES	128
-#define TCS4525_NVOLTAGES	127	/* Numbers of voltages */
 
 #define TCS_VSEL_NSEL_MASK	0x7f
 #define TCS_VSEL0_MODE		(1 << 7)
@@ -376,7 +375,7 @@ static int fan53555_voltages_setup_tcs(struct fan53555_device_info *di)
 	/* Init voltage range and step */
 	di->vsel_min = 600000;
 	di->vsel_step = 6250;
-	di->vsel_count = TCS4525_NVOLTAGES;
+	di->vsel_count = FAN53526_NVOLTAGES;
 
 	return 0;
 }
-- 
cgit v1.2.3-59-g8ed1b


From f9028dcdf589f4ab528372088623aa4e8d324df2 Mon Sep 17 00:00:00 2001
From: Peter Geis <pgwipeout@gmail.com>
Date: Tue, 11 May 2021 17:13:34 -0400
Subject: regulator: fan53555: only bind tcs4525 to correct chip id

The tcs4525 regulator has a chip id of <12>.
Only allow the driver to bind to the correct chip id for safety, in
accordance with the other supported devices.

Signed-off-by: Peter Geis <pgwipeout@gmail.com>
Link: https://lore.kernel.org/r/20210511211335.2935163-3-pgwipeout@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
---
 drivers/regulator/fan53555.c | 25 ++++++++++++++++++-------
 1 file changed, 18 insertions(+), 7 deletions(-)

(limited to 'drivers/regulator')

diff --git a/drivers/regulator/fan53555.c b/drivers/regulator/fan53555.c
index 26f06f685b1b..16f28f9df6a1 100644
--- a/drivers/regulator/fan53555.c
+++ b/drivers/regulator/fan53555.c
@@ -89,6 +89,10 @@ enum {
 	FAN53555_CHIP_ID_08 = 8,
 };
 
+enum {
+	TCS4525_CHIP_ID_12 = 12,
+};
+
 /* IC mask revision */
 enum {
 	FAN53555_CHIP_REV_00 = 0x3,
@@ -368,14 +372,21 @@ static int fan53555_voltages_setup_silergy(struct fan53555_device_info *di)
 
 static int fan53555_voltages_setup_tcs(struct fan53555_device_info *di)
 {
-	di->slew_reg = TCS4525_TIME;
-	di->slew_mask = TCS_SLEW_MASK;
-	di->slew_shift = TCS_SLEW_MASK;
+	switch (di->chip_id) {
+	case TCS4525_CHIP_ID_12:
+		di->slew_reg = TCS4525_TIME;
+		di->slew_mask = TCS_SLEW_MASK;
+		di->slew_shift = TCS_SLEW_MASK;
 
-	/* Init voltage range and step */
-	di->vsel_min = 600000;
-	di->vsel_step = 6250;
-	di->vsel_count = FAN53526_NVOLTAGES;
+		/* Init voltage range and step */
+		di->vsel_min = 600000;
+		di->vsel_step = 6250;
+		di->vsel_count = FAN53526_NVOLTAGES;
+		break;
+	default:
+		dev_err(di->dev, "Chip ID %d not supported!\n", di->chip_id);
+		return -EINVAL;
+	}
 
 	return 0;
 }
-- 
cgit v1.2.3-59-g8ed1b


From b3cc8ec04f50d9c860534fe4e3617a8d10ed9ea9 Mon Sep 17 00:00:00 2001
From: Peter Geis <pgwipeout@gmail.com>
Date: Tue, 11 May 2021 17:13:35 -0400
Subject: regulator: fan53555: fix tcs4525 function names

The tcs4525 is based off the fan53526.
Rename the tcs4525 functions to align with this.

Signed-off-by: Peter Geis <pgwipeout@gmail.com>
Link: https://lore.kernel.org/r/20210511211335.2935163-4-pgwipeout@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
---
 drivers/regulator/fan53555.c | 18 +++++++++---------
 1 file changed, 9 insertions(+), 9 deletions(-)

(limited to 'drivers/regulator')

diff --git a/drivers/regulator/fan53555.c b/drivers/regulator/fan53555.c
index 16f28f9df6a1..2695be617373 100644
--- a/drivers/regulator/fan53555.c
+++ b/drivers/regulator/fan53555.c
@@ -67,7 +67,7 @@ enum fan53555_vendor {
 	FAN53526_VENDOR_FAIRCHILD = 0,
 	FAN53555_VENDOR_FAIRCHILD,
 	FAN53555_VENDOR_SILERGY,
-	FAN53555_VENDOR_TCS,
+	FAN53526_VENDOR_TCS,
 };
 
 enum {
@@ -233,7 +233,7 @@ static int fan53555_set_ramp(struct regulator_dev *rdev, int ramp)
 		slew_rate_t = slew_rates;
 		slew_rate_n = ARRAY_SIZE(slew_rates);
 		break;
-	case FAN53555_VENDOR_TCS:
+	case FAN53526_VENDOR_TCS:
 		slew_rate_t = tcs_slew_rates;
 		slew_rate_n = ARRAY_SIZE(tcs_slew_rates);
 		break;
@@ -370,7 +370,7 @@ static int fan53555_voltages_setup_silergy(struct fan53555_device_info *di)
 	return 0;
 }
 
-static int fan53555_voltages_setup_tcs(struct fan53555_device_info *di)
+static int fan53526_voltages_setup_tcs(struct fan53555_device_info *di)
 {
 	switch (di->chip_id) {
 	case TCS4525_CHIP_ID_12:
@@ -420,7 +420,7 @@ static int fan53555_device_setup(struct fan53555_device_info *di,
 			return -EINVAL;
 		}
 		break;
-	case FAN53555_VENDOR_TCS:
+	case FAN53526_VENDOR_TCS:
 		switch (pdata->sleep_vsel_id) {
 		case FAN53555_VSEL_ID_0:
 			di->sleep_reg = TCS4525_VSEL0;
@@ -459,7 +459,7 @@ static int fan53555_device_setup(struct fan53555_device_info *di,
 		di->mode_reg = di->vol_reg;
 		di->mode_mask = VSEL_MODE;
 		break;
-	case FAN53555_VENDOR_TCS:
+	case FAN53526_VENDOR_TCS:
 		di->mode_reg = TCS4525_COMMAND;
 
 		switch (pdata->sleep_vsel_id) {
@@ -487,8 +487,8 @@ static int fan53555_device_setup(struct fan53555_device_info *di,
 	case FAN53555_VENDOR_SILERGY:
 		ret = fan53555_voltages_setup_silergy(di);
 		break;
-	case FAN53555_VENDOR_TCS:
-		ret = fan53555_voltages_setup_tcs(di);
+	case FAN53526_VENDOR_TCS:
+		ret = fan53526_voltages_setup_tcs(di);
 		break;
 	default:
 		dev_err(di->dev, "vendor %d not supported!\n", di->vendor);
@@ -563,7 +563,7 @@ static const struct of_device_id __maybe_unused fan53555_dt_ids[] = {
 		.data = (void *)FAN53555_VENDOR_SILERGY,
 	}, {
 		.compatible = "tcs,tcs4525",
-		.data = (void *)FAN53555_VENDOR_TCS
+		.data = (void *)FAN53526_VENDOR_TCS
 	},
 	{ }
 };
@@ -671,7 +671,7 @@ static const struct i2c_device_id fan53555_id[] = {
 		.driver_data = FAN53555_VENDOR_SILERGY
 	}, {
 		.name = "tcs4525",
-		.driver_data = FAN53555_VENDOR_TCS
+		.driver_data = FAN53526_VENDOR_TCS
 	},
 	{ },
 };
-- 
cgit v1.2.3-59-g8ed1b


From 3799fa23afa4cac347739d5290df44a474a82a82 Mon Sep 17 00:00:00 2001
From: Axel Lin <axel.lin@ingics.com>
Date: Tue, 18 May 2021 19:48:43 +0800
Subject: regulator: bd71815: Fix missing include files
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Include linux/of.h and linux/gpio/consumer.h to fix below errors:
error: implicit declaration of function ‘of_match_ptr’
error: implicit declaration of function ‘devm_gpiod_get_from_of_node’

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Reviewed-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Link: https://lore.kernel.org/r/20210518114843.1495152-1-axel.lin@ingics.com
Signed-off-by: Mark Brown <broonie@kernel.org>
---
 drivers/regulator/bd71815-regulator.c | 2 ++
 1 file changed, 2 insertions(+)

(limited to 'drivers/regulator')

diff --git a/drivers/regulator/bd71815-regulator.c b/drivers/regulator/bd71815-regulator.c
index a4e8d5e36b40..a079efa80092 100644
--- a/drivers/regulator/bd71815-regulator.c
+++ b/drivers/regulator/bd71815-regulator.c
@@ -13,6 +13,8 @@
 #include <linux/init.h>
 #include <linux/err.h>
 #include <linux/platform_device.h>
+#include <linux/of.h>
+#include <linux/gpio/consumer.h>
 #include <linux/regulator/driver.h>
 #include <linux/delay.h>
 #include <linux/slab.h>
-- 
cgit v1.2.3-59-g8ed1b


From 7075359c8e0da1b01e34201b09b9ab2fd23b8a7d Mon Sep 17 00:00:00 2001
From: Axel Lin <axel.lin@ingics.com>
Date: Mon, 17 May 2021 18:53:25 +0800
Subject: regulator: fan53880: Convert to use .probe_new

Use the new .probe_new for fan53880.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Acked-by: Christoph Fritz <chf.fritz@googlemail.com>
Link: https://lore.kernel.org/r/20210517105325.1227393-2-axel.lin@ingics.com
Signed-off-by: Mark Brown <broonie@kernel.org>
---
 drivers/regulator/fan53880.c | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

(limited to 'drivers/regulator')

diff --git a/drivers/regulator/fan53880.c b/drivers/regulator/fan53880.c
index e83eb4fb1876..d49f10ac222d 100644
--- a/drivers/regulator/fan53880.c
+++ b/drivers/regulator/fan53880.c
@@ -111,8 +111,7 @@ static const struct regmap_config fan53880_regmap = {
 	.max_register = FAN53880_ENABLE_BOOST,
 };
 
-static int fan53880_i2c_probe(struct i2c_client *i2c,
-			     const struct i2c_device_id *id)
+static int fan53880_i2c_probe(struct i2c_client *i2c)
 {
 	struct regulator_config config = { };
 	struct regulator_dev *rdev;
@@ -174,7 +173,7 @@ static struct i2c_driver fan53880_regulator_driver = {
 		.name = "fan53880",
 		.of_match_table	= of_match_ptr(fan53880_dt_ids),
 	},
-	.probe = fan53880_i2c_probe,
+	.probe_new = fan53880_i2c_probe,
 	.id_table = fan53880_i2c_id,
 };
 module_i2c_driver(fan53880_regulator_driver);
-- 
cgit v1.2.3-59-g8ed1b


From a7f003147b785d9780ceeac13a8e344927a3b9ea Mon Sep 17 00:00:00 2001
From: Axel Lin <axel.lin@ingics.com>
Date: Mon, 17 May 2021 09:03:17 +0800
Subject: regulator: fan53555: Fix slew_shift setting for tcs4525

Fix trivial copy-paste mistake.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Link: https://lore.kernel.org/r/20210517010318.1027949-1-axel.lin@ingics.com
Signed-off-by: Mark Brown <broonie@kernel.org>
---
 drivers/regulator/fan53555.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/regulator')

diff --git a/drivers/regulator/fan53555.c b/drivers/regulator/fan53555.c
index 2695be617373..d582ef3a3aeb 100644
--- a/drivers/regulator/fan53555.c
+++ b/drivers/regulator/fan53555.c
@@ -376,7 +376,7 @@ static int fan53526_voltages_setup_tcs(struct fan53555_device_info *di)
 	case TCS4525_CHIP_ID_12:
 		di->slew_reg = TCS4525_TIME;
 		di->slew_mask = TCS_SLEW_MASK;
-		di->slew_shift = TCS_SLEW_MASK;
+		di->slew_shift = TCS_SLEW_SHIFT;
 
 		/* Init voltage range and step */
 		di->vsel_min = 600000;
-- 
cgit v1.2.3-59-g8ed1b


From 79c7e1447c1c998e2571191e3cad12f9285ee22e Mon Sep 17 00:00:00 2001
From: Axel Lin <axel.lin@ingics.com>
Date: Mon, 17 May 2021 09:03:18 +0800
Subject: regulator: fan53555: Cleanup unused define and redundant assignment

TCS_VSEL_NSEL_MASK is not used so remove it.
Also remove redundant assignment for di->slew_reg.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Link: https://lore.kernel.org/r/20210517010318.1027949-2-axel.lin@ingics.com
Signed-off-by: Mark Brown <broonie@kernel.org>
---
 drivers/regulator/fan53555.c | 2 --
 1 file changed, 2 deletions(-)

(limited to 'drivers/regulator')

diff --git a/drivers/regulator/fan53555.c b/drivers/regulator/fan53555.c
index d582ef3a3aeb..f3f49cf3731b 100644
--- a/drivers/regulator/fan53555.c
+++ b/drivers/regulator/fan53555.c
@@ -56,7 +56,6 @@
 #define FAN53555_NVOLTAGES	64	/* Numbers of voltages */
 #define FAN53526_NVOLTAGES	128
 
-#define TCS_VSEL_NSEL_MASK	0x7f
 #define TCS_VSEL0_MODE		(1 << 7)
 #define TCS_VSEL1_MODE		(1 << 6)
 
@@ -362,7 +361,6 @@ static int fan53555_voltages_setup_silergy(struct fan53555_device_info *di)
 		return -EINVAL;
 	}
 	di->slew_reg = FAN53555_CONTROL;
-	di->slew_reg = FAN53555_CONTROL;
 	di->slew_mask = CTL_SLEW_MASK;
 	di->slew_shift = CTL_SLEW_SHIFT;
 	di->vsel_count = FAN53555_NVOLTAGES;
-- 
cgit v1.2.3-59-g8ed1b


From 5ba3747dbc9ade2d22a8f5bff3c928cb41d35030 Mon Sep 17 00:00:00 2001
From: Randy Dunlap <rdunlap@infradead.org>
Date: Sat, 22 May 2021 17:14:27 -0700
Subject: regulator: bd71815: add select to fix build

Mend the Kconfig for REGULATOR_BD71815 to prevent build errors:

riscv32-linux-ld: drivers/regulator/bd71815-regulator.o: in function `.L0 ':
regulator.c:289: undefined reference to `rohm_regulator_set_dvs_levels'
riscv32-linux-ld: drivers/regulator/bd71815-regulator.c:370: undefined reference to `rohm_regulator_set_dvs_levels'

Fixes: 1aad39001e85 ("regulator: Support ROHM BD71815 regulators")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Cc: Lee Jones <lee.jones@linaro.org>
Cc: Mark Brown <broonie@kernel.org>
Cc: Liam Girdwood <lgirdwood@gmail.com>
Reviewed-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Link: https://lore.kernel.org/r/20210523001427.13500-1-rdunlap@infradead.org
Signed-off-by: Mark Brown <broonie@kernel.org>
---
 drivers/regulator/Kconfig | 1 +
 1 file changed, 1 insertion(+)

(limited to 'drivers/regulator')

diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
index 9d84d9245490..9aeb32c320aa 100644
--- a/drivers/regulator/Kconfig
+++ b/drivers/regulator/Kconfig
@@ -207,6 +207,7 @@ config REGULATOR_BD70528
 config REGULATOR_BD71815
 	tristate "ROHM BD71815 Power Regulator"
 	depends on MFD_ROHM_BD71828
+	select REGULATOR_ROHM
 	help
 	  This driver supports voltage regulators on ROHM BD71815 PMIC.
 	  This will enable support for the software controllable buck
-- 
cgit v1.2.3-59-g8ed1b


From 8590ccd4dfd207d89c3312cf8a8b25990acaa079 Mon Sep 17 00:00:00 2001
From: Axel Lin <axel.lin@ingics.com>
Date: Sat, 22 May 2021 12:08:14 +0800
Subject: regulator: max8973: Convert to use regulator_set_ramp_delay_regmap

Use regulator_set_ramp_delay_regmap instead of open-coded.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Link: https://lore.kernel.org/r/20210522040814.2042397-1-axel.lin@ingics.com
Signed-off-by: Mark Brown <broonie@kernel.org>
---
 drivers/regulator/max8973-regulator.c | 37 +++++++++--------------------------
 1 file changed, 9 insertions(+), 28 deletions(-)

(limited to 'drivers/regulator')

diff --git a/drivers/regulator/max8973-regulator.c b/drivers/regulator/max8973-regulator.c
index 9aee1444181d..8da8f9b6c4fd 100644
--- a/drivers/regulator/max8973-regulator.c
+++ b/drivers/regulator/max8973-regulator.c
@@ -265,33 +265,6 @@ static unsigned int max8973_dcdc_get_mode(struct regulator_dev *rdev)
 		REGULATOR_MODE_FAST : REGULATOR_MODE_NORMAL;
 }
 
-static int max8973_set_ramp_delay(struct regulator_dev *rdev,
-		int ramp_delay)
-{
-	struct max8973_chip *max = rdev_get_drvdata(rdev);
-	unsigned int control;
-	int ret;
-
-	/* Set ramp delay */
-	if (ramp_delay <= 12000)
-		control = MAX8973_RAMP_12mV_PER_US;
-	else if (ramp_delay <= 25000)
-		control = MAX8973_RAMP_25mV_PER_US;
-	else if (ramp_delay <= 50000)
-		control = MAX8973_RAMP_50mV_PER_US;
-	else if (ramp_delay <= 200000)
-		control = MAX8973_RAMP_200mV_PER_US;
-	else
-		return -EINVAL;
-
-	ret = regmap_update_bits(max->regmap, MAX8973_CONTROL1,
-			MAX8973_RAMP_MASK, control);
-	if (ret < 0)
-		dev_err(max->dev, "register %d update failed, %d",
-				MAX8973_CONTROL1, ret);
-	return ret;
-}
-
 static int max8973_set_current_limit(struct regulator_dev *rdev,
 		int min_ua, int max_ua)
 {
@@ -341,6 +314,10 @@ static int max8973_get_current_limit(struct regulator_dev *rdev)
 	return 9000000;
 }
 
+static const unsigned int max8973_buck_ramp_table[] = {
+	12000, 25000, 50000, 200000
+};
+
 static const struct regulator_ops max8973_dcdc_ops = {
 	.get_voltage_sel	= max8973_dcdc_get_voltage_sel,
 	.set_voltage_sel	= max8973_dcdc_set_voltage_sel,
@@ -348,7 +325,7 @@ static const struct regulator_ops max8973_dcdc_ops = {
 	.set_mode		= max8973_dcdc_set_mode,
 	.get_mode		= max8973_dcdc_get_mode,
 	.set_voltage_time_sel	= regulator_set_voltage_time_sel,
-	.set_ramp_delay		= max8973_set_ramp_delay,
+	.set_ramp_delay		= regulator_set_ramp_delay_regmap,
 };
 
 static int max8973_init_dcdc(struct max8973_chip *max,
@@ -694,6 +671,10 @@ static int max8973_probe(struct i2c_client *client,
 	max->desc.min_uV = MAX8973_MIN_VOLATGE;
 	max->desc.uV_step = MAX8973_VOLATGE_STEP;
 	max->desc.n_voltages = MAX8973_BUCK_N_VOLTAGE;
+	max->desc.ramp_reg = MAX8973_CONTROL1;
+	max->desc.ramp_mask = MAX8973_RAMP_MASK;
+	max->desc.ramp_delay_table = max8973_buck_ramp_table;
+	max->desc.n_ramp_values = ARRAY_SIZE(max8973_buck_ramp_table);
 
 	max->dvs_gpio = (pdata->dvs_gpio) ? pdata->dvs_gpio : -EINVAL;
 	max->enable_external_control = pdata->enable_ext_control;
-- 
cgit v1.2.3-59-g8ed1b


From 7c556aec14099c87c95bb7011c74fafe45d93679 Mon Sep 17 00:00:00 2001
From: Axel Lin <axel.lin@ingics.com>
Date: Sat, 22 May 2021 20:42:50 +0800
Subject: regulator: bd70528: Convert to use regulator_set_ramp_delay_regmap

Use regulator_set_ramp_delay_regmap instead of open-coded.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Reviewed-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Link: https://lore.kernel.org/r/20210522124250.2121076-1-axel.lin@ingics.com
Signed-off-by: Mark Brown <broonie@kernel.org>
---
 drivers/regulator/bd70528-regulator.c | 37 +++++++++++++++--------------------
 1 file changed, 16 insertions(+), 21 deletions(-)

(limited to 'drivers/regulator')

diff --git a/drivers/regulator/bd70528-regulator.c b/drivers/regulator/bd70528-regulator.c
index 1f5f9482b209..e6fec70fabfa 100644
--- a/drivers/regulator/bd70528-regulator.c
+++ b/drivers/regulator/bd70528-regulator.c
@@ -16,10 +16,6 @@
 #include <linux/regulator/of_regulator.h>
 #include <linux/slab.h>
 
-#define BUCK_RAMPRATE_250MV 0
-#define BUCK_RAMPRATE_125MV 1
-#define BUCK_RAMP_MAX 250
-
 static const struct linear_range bd70528_buck1_volts[] = {
 	REGULATOR_LINEAR_RANGE(1200000, 0x00, 0x1, 600000),
 	REGULATOR_LINEAR_RANGE(2750000, 0x2, 0xf, 50000),
@@ -47,22 +43,9 @@ static const unsigned int led_volts[] = {
 	20000, 30000
 };
 
-static int bd70528_set_ramp_delay(struct regulator_dev *rdev, int ramp_delay)
-{
-	if (ramp_delay > 0 && ramp_delay <= BUCK_RAMP_MAX) {
-		unsigned int ramp_value = BUCK_RAMPRATE_250MV;
-
-		if (ramp_delay <= 125)
-			ramp_value = BUCK_RAMPRATE_125MV;
-
-		return regmap_update_bits(rdev->regmap, rdev->desc->vsel_reg,
-				  BD70528_MASK_BUCK_RAMP,
-				  ramp_value << BD70528_SIFT_BUCK_RAMP);
-	}
-	dev_err(&rdev->dev, "%s: ramp_delay: %d not supported\n",
-		rdev->desc->name, ramp_delay);
-	return -EINVAL;
-}
+static const unsigned int bd70528_buck_ramp_table[] = {
+	250, 125
+};
 
 static int bd70528_led_set_voltage_sel(struct regulator_dev *rdev,
 				       unsigned int sel)
@@ -90,7 +73,7 @@ static const struct regulator_ops bd70528_buck_ops = {
 	.set_voltage_sel = regulator_set_voltage_sel_regmap,
 	.get_voltage_sel = regulator_get_voltage_sel_regmap,
 	.set_voltage_time_sel = regulator_set_voltage_time_sel,
-	.set_ramp_delay = bd70528_set_ramp_delay,
+	.set_ramp_delay = regulator_set_ramp_delay_regmap,
 };
 
 static const struct regulator_ops bd70528_ldo_ops = {
@@ -127,6 +110,10 @@ static const struct regulator_desc bd70528_desc[] = {
 		.enable_mask = BD70528_MASK_RUN_EN,
 		.vsel_reg = BD70528_REG_BUCK1_VOLT,
 		.vsel_mask = BD70528_MASK_BUCK_VOLT,
+		.ramp_reg = BD70528_REG_BUCK1_VOLT,
+		.ramp_mask = BD70528_MASK_BUCK_RAMP,
+		.ramp_delay_table = bd70528_buck_ramp_table,
+		.n_ramp_values = ARRAY_SIZE(bd70528_buck_ramp_table),
 		.owner = THIS_MODULE,
 	},
 	{
@@ -143,6 +130,10 @@ static const struct regulator_desc bd70528_desc[] = {
 		.enable_mask = BD70528_MASK_RUN_EN,
 		.vsel_reg = BD70528_REG_BUCK2_VOLT,
 		.vsel_mask = BD70528_MASK_BUCK_VOLT,
+		.ramp_reg = BD70528_REG_BUCK2_VOLT,
+		.ramp_mask = BD70528_MASK_BUCK_RAMP,
+		.ramp_delay_table = bd70528_buck_ramp_table,
+		.n_ramp_values = ARRAY_SIZE(bd70528_buck_ramp_table),
 		.owner = THIS_MODULE,
 	},
 	{
@@ -159,6 +150,10 @@ static const struct regulator_desc bd70528_desc[] = {
 		.enable_mask = BD70528_MASK_RUN_EN,
 		.vsel_reg = BD70528_REG_BUCK3_VOLT,
 		.vsel_mask = BD70528_MASK_BUCK_VOLT,
+		.ramp_reg = BD70528_REG_BUCK3_VOLT,
+		.ramp_mask = BD70528_MASK_BUCK_RAMP,
+		.ramp_delay_table = bd70528_buck_ramp_table,
+		.n_ramp_values = ARRAY_SIZE(bd70528_buck_ramp_table),
 		.owner = THIS_MODULE,
 	},
 	{
-- 
cgit v1.2.3-59-g8ed1b


From e0f339213c3bf1b2a8790bd6b5783e383818526b Mon Sep 17 00:00:00 2001
From: Axel Lin <axel.lin@ingics.com>
Date: Thu, 20 May 2021 19:27:19 +0800
Subject: regulator: qcom_smd: Make pm8953_lnldo linear_ranges entries properly
 sorted

For better readability, make linear_ranges entries sort by selector.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Message-Id: <20210520112719.1814396-1-axel.lin@ingics.com>
Signed-off-by: Mark Brown <broonie@sirena.org.uk>
---
 drivers/regulator/qcom_smd-regulator.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/regulator')

diff --git a/drivers/regulator/qcom_smd-regulator.c b/drivers/regulator/qcom_smd-regulator.c
index 05df7b00e3b1..198fcc6551f6 100644
--- a/drivers/regulator/qcom_smd-regulator.c
+++ b/drivers/regulator/qcom_smd-regulator.c
@@ -449,8 +449,8 @@ static const struct regulator_desc pm8950_pldo = {
 
 static const struct regulator_desc pm8953_lnldo = {
 	.linear_ranges = (struct linear_range[]) {
-		REGULATOR_LINEAR_RANGE(1380000, 8, 15, 120000),
 		REGULATOR_LINEAR_RANGE(690000, 0, 7, 60000),
+		REGULATOR_LINEAR_RANGE(1380000, 8, 15, 120000),
 	},
 	.n_linear_ranges = 2,
 	.n_voltages = 16,
-- 
cgit v1.2.3-59-g8ed1b


From e1e8d55bb90c9a07aa66a0c9fa17bd5a67d2689c Mon Sep 17 00:00:00 2001
From: Axel Lin <axel.lin@ingics.com>
Date: Tue, 25 May 2021 18:27:08 +0800
Subject: regulator: mp886x: Convert to use regulator_set_ramp_delay_regmap

Use regulator_set_ramp_delay_regmap instead of open-coded.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Message-Id: <20210525102708.2519323-1-axel.lin@ingics.com>
Signed-off-by: Mark Brown <broonie@sirena.org.uk>
---
 drivers/regulator/mp886x.c | 32 +++++++-------------------------
 1 file changed, 7 insertions(+), 25 deletions(-)

(limited to 'drivers/regulator')

diff --git a/drivers/regulator/mp886x.c b/drivers/regulator/mp886x.c
index a84fd74081de..8ad4722eca4b 100644
--- a/drivers/regulator/mp886x.c
+++ b/drivers/regulator/mp886x.c
@@ -26,7 +26,7 @@
 
 struct mp886x_cfg_info {
 	const struct regulator_ops *rops;
-	const int slew_rates[8];
+	const unsigned int slew_rates[8];
 	const int switch_freq[4];
 	const u8 fs_reg;
 	const u8 fs_shift;
@@ -42,28 +42,6 @@ struct mp886x_device_info {
 	unsigned int sel;
 };
 
-static int mp886x_set_ramp(struct regulator_dev *rdev, int ramp)
-{
-	struct mp886x_device_info *di = rdev_get_drvdata(rdev);
-	const struct mp886x_cfg_info *ci = di->ci;
-	int reg = -1, i;
-
-	for (i = 0; i < ARRAY_SIZE(ci->slew_rates); i++) {
-		if (ramp <= ci->slew_rates[i])
-			reg = i;
-		else
-			break;
-	}
-
-	if (reg < 0) {
-		dev_err(di->dev, "unsupported ramp value %d\n", ramp);
-		return -EINVAL;
-	}
-
-	return regmap_update_bits(rdev->regmap, MP886X_SYSCNTLREG1,
-				  MP886X_SLEW_MASK, reg << MP886X_SLEW_SHIFT);
-}
-
 static void mp886x_set_switch_freq(struct mp886x_device_info *di,
 				   struct regmap *regmap,
 				   u32 freq)
@@ -169,7 +147,7 @@ static const struct regulator_ops mp8869_regulator_ops = {
 	.is_enabled = regulator_is_enabled_regmap,
 	.set_mode = mp886x_set_mode,
 	.get_mode = mp886x_get_mode,
-	.set_ramp_delay = mp886x_set_ramp,
+	.set_ramp_delay = regulator_set_ramp_delay_regmap,
 };
 
 static const struct mp886x_cfg_info mp8869_ci = {
@@ -248,7 +226,7 @@ static const struct regulator_ops mp8867_regulator_ops = {
 	.is_enabled = regulator_is_enabled_regmap,
 	.set_mode = mp886x_set_mode,
 	.get_mode = mp886x_get_mode,
-	.set_ramp_delay = mp886x_set_ramp,
+	.set_ramp_delay = regulator_set_ramp_delay_regmap,
 };
 
 static const struct mp886x_cfg_info mp8867_ci = {
@@ -290,6 +268,10 @@ static int mp886x_regulator_register(struct mp886x_device_info *di,
 	rdesc->uV_step = 10000;
 	rdesc->vsel_reg = MP886X_VSEL;
 	rdesc->vsel_mask = 0x3f;
+	rdesc->ramp_reg = MP886X_SYSCNTLREG1;
+	rdesc->ramp_mask = MP886X_SLEW_MASK;
+	rdesc->ramp_delay_table = di->ci->slew_rates;
+	rdesc->n_ramp_values = ARRAY_SIZE(di->ci->slew_rates);
 	rdesc->owner = THIS_MODULE;
 
 	rdev = devm_regulator_register(di->dev, &di->desc, config);
-- 
cgit v1.2.3-59-g8ed1b


From 15413ce566c248967c96f71f824b79aa8d328e03 Mon Sep 17 00:00:00 2001
From: Axel Lin <axel.lin@ingics.com>
Date: Sat, 22 May 2021 10:30:18 +0800
Subject: regulator: mp5416: Convert to use regulator_set_ramp_delay_regmap

Use regulator_set_ramp_delay_regmap instead of open-coded.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Message-Id: <20210522023018.2025188-1-axel.lin@ingics.com>
Signed-off-by: Mark Brown <broonie@sirena.org.uk>
---
 drivers/regulator/mp5416.c | 44 +++++++++++++++-----------------------------
 1 file changed, 15 insertions(+), 29 deletions(-)

(limited to 'drivers/regulator')

diff --git a/drivers/regulator/mp5416.c b/drivers/regulator/mp5416.c
index 67ce1b52a1a1..39cebec0edb6 100644
--- a/drivers/regulator/mp5416.c
+++ b/drivers/regulator/mp5416.c
@@ -67,6 +67,10 @@
 		.vsel_mask = MP5416_MASK_VSET,				\
 		.enable_reg = MP5416_REG_BUCK ## _id,			\
 		.enable_mask = MP5416_REGULATOR_EN,			\
+		.ramp_reg = MP5416_REG_CTL2,				\
+		.ramp_mask = MP5416_MASK_DVS_SLEWRATE,			\
+		.ramp_delay_table = mp5416_buck_ramp_table,		\
+		.n_ramp_values = ARRAY_SIZE(mp5416_buck_ramp_table),	\
 		.active_discharge_on	= _dval,			\
 		.active_discharge_reg	= _dreg,			\
 		.active_discharge_mask	= _dval,			\
@@ -123,7 +127,16 @@ static const unsigned int mp5416_I_limits2[] = {
 	2200000, 3200000, 4200000, 5200000
 };
 
-static int mp5416_set_ramp_delay(struct regulator_dev *rdev, int ramp_delay);
+/*
+ * DVS ramp rate BUCK1 to BUCK4
+ * 00: 32mV/us
+ * 01: 16mV/us
+ * 10: 8mV/us
+ * 11: 4mV/us
+ */
+static const unsigned int mp5416_buck_ramp_table[] = {
+	32000, 16000, 8000, 4000
+};
 
 static const struct regulator_ops mp5416_ldo_ops = {
 	.enable			= regulator_enable_regmap,
@@ -147,7 +160,7 @@ static const struct regulator_ops mp5416_buck_ops = {
 	.set_active_discharge	= regulator_set_active_discharge_regmap,
 	.get_current_limit	= regulator_get_current_limit_regmap,
 	.set_current_limit	= regulator_set_current_limit_regmap,
-	.set_ramp_delay		= mp5416_set_ramp_delay,
+	.set_ramp_delay		= regulator_set_ramp_delay_regmap,
 };
 
 static struct regulator_desc mp5416_regulators_desc[MP5416_MAX_REGULATORS] = {
@@ -161,33 +174,6 @@ static struct regulator_desc mp5416_regulators_desc[MP5416_MAX_REGULATORS] = {
 	MP5416LDO("ldo4", 4, BIT(1)),
 };
 
-/*
- * DVS ramp rate BUCK1 to BUCK4
- * 00: 32mV/us
- * 01: 16mV/us
- * 10: 8mV/us
- * 11: 4mV/us
- */
-static int mp5416_set_ramp_delay(struct regulator_dev *rdev, int ramp_delay)
-{
-	unsigned int ramp_val;
-
-	if (ramp_delay > 32000 || ramp_delay < 0)
-		return -EINVAL;
-
-	if (ramp_delay <= 4000)
-		ramp_val = 3;
-	else if (ramp_delay <= 8000)
-		ramp_val = 2;
-	else if (ramp_delay <= 16000)
-		ramp_val = 1;
-	else
-		ramp_val = 0;
-
-	return regmap_update_bits(rdev->regmap, MP5416_REG_CTL2,
-				  MP5416_MASK_DVS_SLEWRATE, ramp_val << 6);
-}
-
 static int mp5416_i2c_probe(struct i2c_client *client)
 {
 	struct device *dev = &client->dev;
-- 
cgit v1.2.3-59-g8ed1b


From 5c42903e144b8e914ea22098f872669188680d9b Mon Sep 17 00:00:00 2001
From: Axel Lin <axel.lin@ingics.com>
Date: Mon, 24 May 2021 20:37:35 +0800
Subject: regulator: rt4831: Add missing .owner field in regulator_desc

Add missing .owner field in regulator_desc, which is used for refcounting.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Message-Id: <20210524123735.2363676-1-axel.lin@ingics.com>
Signed-off-by: Mark Brown <broonie@sirena.org.uk>
---
 drivers/regulator/rt4831-regulator.c | 3 +++
 1 file changed, 3 insertions(+)

(limited to 'drivers/regulator')

diff --git a/drivers/regulator/rt4831-regulator.c b/drivers/regulator/rt4831-regulator.c
index e3aaac90d238..676b0419e48f 100644
--- a/drivers/regulator/rt4831-regulator.c
+++ b/drivers/regulator/rt4831-regulator.c
@@ -108,6 +108,7 @@ static const struct regulator_desc rt4831_regulator_descs[] = {
 		.bypass_reg = RT4831_REG_DSVEN,
 		.bypass_val_on = DSV_MODE_BYPASS,
 		.bypass_val_off = DSV_MODE_NORMAL,
+		.owner = THIS_MODULE,
 	},
 	{
 		.name = "DSVP",
@@ -125,6 +126,7 @@ static const struct regulator_desc rt4831_regulator_descs[] = {
 		.enable_mask = RT4831_POSEN_MASK,
 		.active_discharge_reg = RT4831_REG_DSVEN,
 		.active_discharge_mask = RT4831_POSADEN_MASK,
+		.owner = THIS_MODULE,
 	},
 	{
 		.name = "DSVN",
@@ -142,6 +144,7 @@ static const struct regulator_desc rt4831_regulator_descs[] = {
 		.enable_mask = RT4831_NEGEN_MASK,
 		.active_discharge_reg = RT4831_REG_DSVEN,
 		.active_discharge_mask = RT4831_NEGADEN_MASK,
+		.owner = THIS_MODULE,
 	}
 };
 
-- 
cgit v1.2.3-59-g8ed1b


From f85ea4945a268be6b0a6373f8ef1b2450d3f394b Mon Sep 17 00:00:00 2001
From: Axel Lin <axel.lin@ingics.com>
Date: Tue, 25 May 2021 22:12:03 +0800
Subject: regulator: rk808: Convert to use regulator_set_ramp_delay_regmap

Use regulator_set_ramp_delay_regmap instead of open-coded.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Message-Id: <20210525141203.2562884-1-axel.lin@ingics.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
---
 drivers/regulator/rk808-regulator.c | 116 ++++++++++++++++--------------------
 1 file changed, 51 insertions(+), 65 deletions(-)

(limited to 'drivers/regulator')

diff --git a/drivers/regulator/rk808-regulator.c b/drivers/regulator/rk808-regulator.c
index e926c1a85846..127dc2e2e690 100644
--- a/drivers/regulator/rk808-regulator.c
+++ b/drivers/regulator/rk808-regulator.c
@@ -158,13 +158,6 @@ struct rk808_regulator_data {
 	struct gpio_desc *dvs_gpio[2];
 };
 
-static const int rk808_buck_config_regs[] = {
-	RK808_BUCK1_CONFIG_REG,
-	RK808_BUCK2_CONFIG_REG,
-	RK808_BUCK3_CONFIG_REG,
-	RK808_BUCK4_CONFIG_REG,
-};
-
 static const struct linear_range rk808_ldo3_voltage_ranges[] = {
 	REGULATOR_LINEAR_RANGE(800000, 0, 13, 100000),
 	REGULATOR_LINEAR_RANGE(2500000, 15, 15, 0),
@@ -215,6 +208,15 @@ static const struct linear_range rk817_buck3_voltage_ranges[] = {
 			       RK817_BUCK3_SEL_CNT, RK817_BUCK1_STP1),
 };
 
+static const unsigned int rk808_buck1_2_ramp_table[] = {
+	2000, 4000, 6000, 10000
+};
+
+/* RK817 RK809 */
+static const unsigned int rk817_buck1_4_ramp_table[] = {
+	3000, 6300, 12500, 25000
+};
+
 static int rk808_buck1_2_get_voltage_sel_regmap(struct regulator_dev *rdev)
 {
 	struct rk808_regulator_data *pdata = rdev_get_drvdata(rdev);
@@ -340,62 +342,6 @@ static int rk808_buck1_2_set_voltage_time_sel(struct regulator_dev *rdev,
 	return regulator_set_voltage_time_sel(rdev, old_selector, new_selector);
 }
 
-static int rk808_set_ramp_delay(struct regulator_dev *rdev, int ramp_delay)
-{
-	unsigned int ramp_value = RK808_RAMP_RATE_10MV_PER_US;
-	unsigned int reg = rk808_buck_config_regs[rdev_get_id(rdev)];
-
-	switch (ramp_delay) {
-	case 1 ... 2000:
-		ramp_value = RK808_RAMP_RATE_2MV_PER_US;
-		break;
-	case 2001 ... 4000:
-		ramp_value = RK808_RAMP_RATE_4MV_PER_US;
-		break;
-	case 4001 ... 6000:
-		ramp_value = RK808_RAMP_RATE_6MV_PER_US;
-		break;
-	case 6001 ... 10000:
-		break;
-	default:
-		pr_warn("%s ramp_delay: %d not supported, setting 10000\n",
-			rdev->desc->name, ramp_delay);
-	}
-
-	return regmap_update_bits(rdev->regmap, reg,
-				  RK808_RAMP_RATE_MASK, ramp_value);
-}
-
-/*
- * RK817 RK809
- */
-static int rk817_set_ramp_delay(struct regulator_dev *rdev, int ramp_delay)
-{
-	unsigned int ramp_value = RK817_RAMP_RATE_25MV_PER_US;
-	unsigned int reg = RK817_BUCK_CONFIG_REG(rdev_get_id(rdev));
-
-	switch (ramp_delay) {
-	case 0 ... 3000:
-		ramp_value = RK817_RAMP_RATE_3MV_PER_US;
-		break;
-	case 3001 ... 6300:
-		ramp_value = RK817_RAMP_RATE_6_3MV_PER_US;
-		break;
-	case 6301 ... 12500:
-		ramp_value = RK817_RAMP_RATE_12_5MV_PER_US;
-		break;
-	case 12501 ... 25000:
-		break;
-	default:
-		dev_warn(&rdev->dev,
-			 "%s ramp_delay: %d not supported, setting 25000\n",
-			 rdev->desc->name, ramp_delay);
-	}
-
-	return regmap_update_bits(rdev->regmap, reg,
-				  RK817_RAMP_RATE_MASK, ramp_value);
-}
-
 static int rk808_set_suspend_voltage(struct regulator_dev *rdev, int uv)
 {
 	unsigned int reg;
@@ -625,7 +571,7 @@ static const struct regulator_ops rk808_buck1_2_ops = {
 	.enable			= regulator_enable_regmap,
 	.disable		= regulator_disable_regmap,
 	.is_enabled		= regulator_is_enabled_regmap,
-	.set_ramp_delay		= rk808_set_ramp_delay,
+	.set_ramp_delay		= regulator_set_ramp_delay_regmap,
 	.set_suspend_voltage	= rk808_set_suspend_voltage,
 	.set_suspend_enable	= rk808_set_suspend_enable,
 	.set_suspend_disable	= rk808_set_suspend_disable,
@@ -722,7 +668,7 @@ static const struct regulator_ops rk817_buck_ops_range = {
 	.set_mode		= rk8xx_set_mode,
 	.get_mode		= rk8xx_get_mode,
 	.set_suspend_mode	= rk8xx_set_suspend_mode,
-	.set_ramp_delay		= rk817_set_ramp_delay,
+	.set_ramp_delay		= regulator_set_ramp_delay_regmap,
 	.set_suspend_voltage	= rk808_set_suspend_voltage_range,
 	.set_suspend_enable	= rk817_set_suspend_enable,
 	.set_suspend_disable	= rk817_set_suspend_disable,
@@ -814,6 +760,10 @@ static const struct regulator_desc rk808_reg[] = {
 		.vsel_mask = RK808_BUCK_VSEL_MASK,
 		.enable_reg = RK808_DCDC_EN_REG,
 		.enable_mask = BIT(0),
+		.ramp_reg = RK808_BUCK1_CONFIG_REG,
+		.ramp_mask = RK808_RAMP_RATE_MASK,
+		.ramp_delay_table = rk808_buck1_2_ramp_table,
+		.n_ramp_values = ARRAY_SIZE(rk808_buck1_2_ramp_table),
 		.owner = THIS_MODULE,
 	}, {
 		.name = "DCDC_REG2",
@@ -830,6 +780,10 @@ static const struct regulator_desc rk808_reg[] = {
 		.vsel_mask = RK808_BUCK_VSEL_MASK,
 		.enable_reg = RK808_DCDC_EN_REG,
 		.enable_mask = BIT(1),
+		.ramp_reg = RK808_BUCK2_CONFIG_REG,
+		.ramp_mask = RK808_RAMP_RATE_MASK,
+		.ramp_delay_table = rk808_buck1_2_ramp_table,
+		.n_ramp_values = ARRAY_SIZE(rk808_buck1_2_ramp_table),
 		.owner = THIS_MODULE,
 	}, {
 		.name = "DCDC_REG3",
@@ -910,6 +864,10 @@ static const struct regulator_desc rk809_reg[] = {
 		.enable_mask = ENABLE_MASK(RK817_ID_DCDC1),
 		.enable_val = ENABLE_MASK(RK817_ID_DCDC1),
 		.disable_val = DISABLE_VAL(RK817_ID_DCDC1),
+		.ramp_reg = RK817_BUCK_CONFIG_REG(RK817_ID_DCDC1),
+		.ramp_mask = RK817_RAMP_RATE_MASK,
+		.ramp_delay_table = rk817_buck1_4_ramp_table,
+		.n_ramp_values = ARRAY_SIZE(rk817_buck1_4_ramp_table),
 		.of_map_mode = rk8xx_regulator_of_map_mode,
 		.owner = THIS_MODULE,
 	}, {
@@ -929,6 +887,10 @@ static const struct regulator_desc rk809_reg[] = {
 		.enable_mask = ENABLE_MASK(RK817_ID_DCDC2),
 		.enable_val = ENABLE_MASK(RK817_ID_DCDC2),
 		.disable_val = DISABLE_VAL(RK817_ID_DCDC2),
+		.ramp_reg = RK817_BUCK_CONFIG_REG(RK817_ID_DCDC2),
+		.ramp_mask = RK817_RAMP_RATE_MASK,
+		.ramp_delay_table = rk817_buck1_4_ramp_table,
+		.n_ramp_values = ARRAY_SIZE(rk817_buck1_4_ramp_table),
 		.of_map_mode = rk8xx_regulator_of_map_mode,
 		.owner = THIS_MODULE,
 	}, {
@@ -948,6 +910,10 @@ static const struct regulator_desc rk809_reg[] = {
 		.enable_mask = ENABLE_MASK(RK817_ID_DCDC3),
 		.enable_val = ENABLE_MASK(RK817_ID_DCDC3),
 		.disable_val = DISABLE_VAL(RK817_ID_DCDC3),
+		.ramp_reg = RK817_BUCK_CONFIG_REG(RK817_ID_DCDC3),
+		.ramp_mask = RK817_RAMP_RATE_MASK,
+		.ramp_delay_table = rk817_buck1_4_ramp_table,
+		.n_ramp_values = ARRAY_SIZE(rk817_buck1_4_ramp_table),
 		.of_map_mode = rk8xx_regulator_of_map_mode,
 		.owner = THIS_MODULE,
 	}, {
@@ -967,6 +933,10 @@ static const struct regulator_desc rk809_reg[] = {
 		.enable_mask = ENABLE_MASK(RK817_ID_DCDC4),
 		.enable_val = ENABLE_MASK(RK817_ID_DCDC4),
 		.disable_val = DISABLE_VAL(RK817_ID_DCDC4),
+		.ramp_reg = RK817_BUCK_CONFIG_REG(RK817_ID_DCDC4),
+		.ramp_mask = RK817_RAMP_RATE_MASK,
+		.ramp_delay_table = rk817_buck1_4_ramp_table,
+		.n_ramp_values = ARRAY_SIZE(rk817_buck1_4_ramp_table),
 		.of_map_mode = rk8xx_regulator_of_map_mode,
 		.owner = THIS_MODULE,
 	},
@@ -1052,6 +1022,10 @@ static const struct regulator_desc rk817_reg[] = {
 		.enable_mask = ENABLE_MASK(RK817_ID_DCDC1),
 		.enable_val = ENABLE_MASK(RK817_ID_DCDC1),
 		.disable_val = DISABLE_VAL(RK817_ID_DCDC1),
+		.ramp_reg = RK817_BUCK_CONFIG_REG(RK817_ID_DCDC1),
+		.ramp_mask = RK817_RAMP_RATE_MASK,
+		.ramp_delay_table = rk817_buck1_4_ramp_table,
+		.n_ramp_values = ARRAY_SIZE(rk817_buck1_4_ramp_table),
 		.of_map_mode = rk8xx_regulator_of_map_mode,
 		.owner = THIS_MODULE,
 	}, {
@@ -1071,6 +1045,10 @@ static const struct regulator_desc rk817_reg[] = {
 		.enable_mask = ENABLE_MASK(RK817_ID_DCDC2),
 		.enable_val = ENABLE_MASK(RK817_ID_DCDC2),
 		.disable_val = DISABLE_VAL(RK817_ID_DCDC2),
+		.ramp_reg = RK817_BUCK_CONFIG_REG(RK817_ID_DCDC2),
+		.ramp_mask = RK817_RAMP_RATE_MASK,
+		.ramp_delay_table = rk817_buck1_4_ramp_table,
+		.n_ramp_values = ARRAY_SIZE(rk817_buck1_4_ramp_table),
 		.of_map_mode = rk8xx_regulator_of_map_mode,
 		.owner = THIS_MODULE,
 	}, {
@@ -1090,6 +1068,10 @@ static const struct regulator_desc rk817_reg[] = {
 		.enable_mask = ENABLE_MASK(RK817_ID_DCDC3),
 		.enable_val = ENABLE_MASK(RK817_ID_DCDC3),
 		.disable_val = DISABLE_VAL(RK817_ID_DCDC3),
+		.ramp_reg = RK817_BUCK_CONFIG_REG(RK817_ID_DCDC3),
+		.ramp_mask = RK817_RAMP_RATE_MASK,
+		.ramp_delay_table = rk817_buck1_4_ramp_table,
+		.n_ramp_values = ARRAY_SIZE(rk817_buck1_4_ramp_table),
 		.of_map_mode = rk8xx_regulator_of_map_mode,
 		.owner = THIS_MODULE,
 	}, {
@@ -1109,6 +1091,10 @@ static const struct regulator_desc rk817_reg[] = {
 		.enable_mask = ENABLE_MASK(RK817_ID_DCDC4),
 		.enable_val = ENABLE_MASK(RK817_ID_DCDC4),
 		.disable_val = DISABLE_VAL(RK817_ID_DCDC4),
+		.ramp_reg = RK817_BUCK_CONFIG_REG(RK817_ID_DCDC4),
+		.ramp_mask = RK817_RAMP_RATE_MASK,
+		.ramp_delay_table = rk817_buck1_4_ramp_table,
+		.n_ramp_values = ARRAY_SIZE(rk817_buck1_4_ramp_table),
 		.of_map_mode = rk8xx_regulator_of_map_mode,
 		.owner = THIS_MODULE,
 	},
-- 
cgit v1.2.3-59-g8ed1b


From d149b855b955fe92ab16ddd59c1d540f82e6a40f Mon Sep 17 00:00:00 2001
From: Zou Wei <zou_wei@huawei.com>
Date: Thu, 27 May 2021 17:54:04 +0800
Subject: regulator: bd71815: fix platform_no_drv_owner.cocci warnings

./drivers/regulator/bd71815-regulator.c:644:3-8: No need to set .owner here. The core will do it.

 Remove .owner field if calls are used which set it automatically

Generated by: scripts/coccinelle/api/platform_no_drv_owner.cocci

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zou Wei <zou_wei@huawei.com>
Acked-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Message-Id: <1622109244-54739-1-git-send-email-zou_wei@huawei.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
---
 drivers/regulator/bd71815-regulator.c | 1 -
 1 file changed, 1 deletion(-)

(limited to 'drivers/regulator')

diff --git a/drivers/regulator/bd71815-regulator.c b/drivers/regulator/bd71815-regulator.c
index a079efa80092..4dd21ac24ddf 100644
--- a/drivers/regulator/bd71815-regulator.c
+++ b/drivers/regulator/bd71815-regulator.c
@@ -641,7 +641,6 @@ MODULE_DEVICE_TABLE(platform, bd7181x_pmic_id);
 static struct platform_driver bd7181x_regulator = {
 	.driver = {
 		.name = "bd7181x-pmic",
-		.owner = THIS_MODULE,
 	},
 	.probe = bd7181x_probe,
 	.id_table = bd7181x_pmic_id,
-- 
cgit v1.2.3-59-g8ed1b


From 380d2b2d5a0491e47dfa250b40e3d849a922871d Mon Sep 17 00:00:00 2001
From: Dmitry Osipenko <digetx@gmail.com>
Date: Fri, 28 May 2021 02:54:00 +0300
Subject: regulator: core: Add regulator_sync_voltage_rdev()

Some NVIDIA Tegra devices use a CPU soft-reset method for the reboot and
in this case we need to restore the coupled voltages to the state that is
suitable for hardware during boot. Add new regulator_sync_voltage_rdev()
helper which is needed by regulator drivers in order to sync voltage of
a coupled regulators.

Acked-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
---
 drivers/regulator/core.c         | 23 +++++++++++++++++++++++
 include/linux/regulator/driver.h |  1 +
 2 files changed, 24 insertions(+)

(limited to 'drivers/regulator')

diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c
index f192bf19492e..ead0b6d2af45 100644
--- a/drivers/regulator/core.c
+++ b/drivers/regulator/core.c
@@ -4105,6 +4105,29 @@ int regulator_set_voltage_time_sel(struct regulator_dev *rdev,
 }
 EXPORT_SYMBOL_GPL(regulator_set_voltage_time_sel);
 
+int regulator_sync_voltage_rdev(struct regulator_dev *rdev)
+{
+	int ret;
+
+	regulator_lock(rdev);
+
+	if (!rdev->desc->ops->set_voltage &&
+	    !rdev->desc->ops->set_voltage_sel) {
+		ret = -EINVAL;
+		goto out;
+	}
+
+	/* balance only, if regulator is coupled */
+	if (rdev->coupling_desc.n_coupled > 1)
+		ret = regulator_balance_voltage(rdev, PM_SUSPEND_ON);
+	else
+		ret = -EOPNOTSUPP;
+
+out:
+	regulator_unlock(rdev);
+	return ret;
+}
+
 /**
  * regulator_sync_voltage - re-apply last regulator output voltage
  * @regulator: regulator source
diff --git a/include/linux/regulator/driver.h b/include/linux/regulator/driver.h
index 4ea520c248e9..35e5a611db81 100644
--- a/include/linux/regulator/driver.h
+++ b/include/linux/regulator/driver.h
@@ -540,6 +540,7 @@ int regulator_set_current_limit_regmap(struct regulator_dev *rdev,
 int regulator_get_current_limit_regmap(struct regulator_dev *rdev);
 void *regulator_get_init_drvdata(struct regulator_init_data *reg_init_data);
 int regulator_set_ramp_delay_regmap(struct regulator_dev *rdev, int ramp_delay);
+int regulator_sync_voltage_rdev(struct regulator_dev *rdev);
 
 /*
  * Helper functions intended to be used by regulator drivers prior registering
-- 
cgit v1.2.3-59-g8ed1b


From 4c4fce171c4ca08cd98be7db350e6950630b046a Mon Sep 17 00:00:00 2001
From: Axel Lin <axel.lin@ingics.com>
Date: Wed, 26 May 2021 20:24:08 +0800
Subject: regulator: pca9450: Convert to use regulator_set_ramp_delay_regmap

Use regulator_set_ramp_delay_regmap instead of open-coded.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Link: https://lore.kernel.org/r/20210526122408.78156-1-axel.lin@ingics.com
Signed-off-by: Mark Brown <broonie@kernel.org>
---
 drivers/regulator/pca9450-regulator.c | 51 +++++++++++++++++------------------
 1 file changed, 24 insertions(+), 27 deletions(-)

(limited to 'drivers/regulator')

diff --git a/drivers/regulator/pca9450-regulator.c b/drivers/regulator/pca9450-regulator.c
index 2f7ee212cb8c..64e5f5f0cc84 100644
--- a/drivers/regulator/pca9450-regulator.c
+++ b/drivers/regulator/pca9450-regulator.c
@@ -65,32 +65,9 @@ static const struct regmap_config pca9450_regmap_config = {
  * 10: 25mV/4usec
  * 11: 25mV/8usec
  */
-static int pca9450_dvs_set_ramp_delay(struct regulator_dev *rdev,
-				      int ramp_delay)
-{
-	int id = rdev_get_id(rdev);
-	unsigned int ramp_value;
-
-	switch (ramp_delay) {
-	case 1 ... 3125:
-		ramp_value = BUCK1_RAMP_3P125MV;
-		break;
-	case 3126 ... 6250:
-		ramp_value = BUCK1_RAMP_6P25MV;
-		break;
-	case 6251 ... 12500:
-		ramp_value = BUCK1_RAMP_12P5MV;
-		break;
-	case 12501 ... 25000:
-		ramp_value = BUCK1_RAMP_25MV;
-		break;
-	default:
-		ramp_value = BUCK1_RAMP_25MV;
-	}
-
-	return regmap_update_bits(rdev->regmap, PCA9450_REG_BUCK1CTRL + id * 3,
-				  BUCK1_RAMP_MASK, ramp_value << 6);
-}
+static const unsigned int pca9450_dvs_buck_ramp_table[] = {
+	25000, 12500, 6250, 3125
+};
 
 static const struct regulator_ops pca9450_dvs_buck_regulator_ops = {
 	.enable = regulator_enable_regmap,
@@ -100,7 +77,7 @@ static const struct regulator_ops pca9450_dvs_buck_regulator_ops = {
 	.set_voltage_sel = regulator_set_voltage_sel_regmap,
 	.get_voltage_sel = regulator_get_voltage_sel_regmap,
 	.set_voltage_time_sel = regulator_set_voltage_time_sel,
-	.set_ramp_delay = pca9450_dvs_set_ramp_delay,
+	.set_ramp_delay	= regulator_set_ramp_delay_regmap,
 };
 
 static const struct regulator_ops pca9450_buck_regulator_ops = {
@@ -251,6 +228,10 @@ static const struct pca9450_regulator_desc pca9450a_regulators[] = {
 			.vsel_mask = BUCK1OUT_DVS0_MASK,
 			.enable_reg = PCA9450_REG_BUCK1CTRL,
 			.enable_mask = BUCK1_ENMODE_MASK,
+			.ramp_reg = PCA9450_REG_BUCK1CTRL,
+			.ramp_mask = BUCK1_RAMP_MASK,
+			.ramp_delay_table = pca9450_dvs_buck_ramp_table,
+			.n_ramp_values = ARRAY_SIZE(pca9450_dvs_buck_ramp_table),
 			.owner = THIS_MODULE,
 			.of_parse_cb = pca9450_set_dvs_levels,
 		},
@@ -276,6 +257,10 @@ static const struct pca9450_regulator_desc pca9450a_regulators[] = {
 			.vsel_mask = BUCK2OUT_DVS0_MASK,
 			.enable_reg = PCA9450_REG_BUCK2CTRL,
 			.enable_mask = BUCK1_ENMODE_MASK,
+			.ramp_reg = PCA9450_REG_BUCK2CTRL,
+			.ramp_mask = BUCK2_RAMP_MASK,
+			.ramp_delay_table = pca9450_dvs_buck_ramp_table,
+			.n_ramp_values = ARRAY_SIZE(pca9450_dvs_buck_ramp_table),
 			.owner = THIS_MODULE,
 			.of_parse_cb = pca9450_set_dvs_levels,
 		},
@@ -301,6 +286,10 @@ static const struct pca9450_regulator_desc pca9450a_regulators[] = {
 			.vsel_mask = BUCK3OUT_DVS0_MASK,
 			.enable_reg = PCA9450_REG_BUCK3CTRL,
 			.enable_mask = BUCK3_ENMODE_MASK,
+			.ramp_reg = PCA9450_REG_BUCK3CTRL,
+			.ramp_mask = BUCK3_RAMP_MASK,
+			.ramp_delay_table = pca9450_dvs_buck_ramp_table,
+			.n_ramp_values = ARRAY_SIZE(pca9450_dvs_buck_ramp_table),
 			.owner = THIS_MODULE,
 			.of_parse_cb = pca9450_set_dvs_levels,
 		},
@@ -477,6 +466,10 @@ static const struct pca9450_regulator_desc pca9450bc_regulators[] = {
 			.vsel_mask = BUCK1OUT_DVS0_MASK,
 			.enable_reg = PCA9450_REG_BUCK1CTRL,
 			.enable_mask = BUCK1_ENMODE_MASK,
+			.ramp_reg = PCA9450_REG_BUCK1CTRL,
+			.ramp_mask = BUCK1_RAMP_MASK,
+			.ramp_delay_table = pca9450_dvs_buck_ramp_table,
+			.n_ramp_values = ARRAY_SIZE(pca9450_dvs_buck_ramp_table),
 			.owner = THIS_MODULE,
 			.of_parse_cb = pca9450_set_dvs_levels,
 		},
@@ -502,6 +495,10 @@ static const struct pca9450_regulator_desc pca9450bc_regulators[] = {
 			.vsel_mask = BUCK2OUT_DVS0_MASK,
 			.enable_reg = PCA9450_REG_BUCK2CTRL,
 			.enable_mask = BUCK1_ENMODE_MASK,
+			.ramp_reg = PCA9450_REG_BUCK2CTRL,
+			.ramp_mask = BUCK2_RAMP_MASK,
+			.ramp_delay_table = pca9450_dvs_buck_ramp_table,
+			.n_ramp_values = ARRAY_SIZE(pca9450_dvs_buck_ramp_table),
 			.owner = THIS_MODULE,
 			.of_parse_cb = pca9450_set_dvs_levels,
 		},
-- 
cgit v1.2.3-59-g8ed1b


From 7f8c8394425fd5e1449bf0a81ab6ec718cd4346b Mon Sep 17 00:00:00 2001
From: Axel Lin <axel.lin@ingics.com>
Date: Sun, 30 May 2021 10:05:43 +0800
Subject: regulator: mt6315: Don't ignore devm_regulator_register failure

Also use dev_err instead of dev_notice for messages in error conditions.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Link: https://lore.kernel.org/r/20210530020543.418634-1-axel.lin@ingics.com
Signed-off-by: Mark Brown <broonie@kernel.org>
---
 drivers/regulator/mt6315-regulator.c | 17 +++++++++--------
 1 file changed, 9 insertions(+), 8 deletions(-)

(limited to 'drivers/regulator')

diff --git a/drivers/regulator/mt6315-regulator.c b/drivers/regulator/mt6315-regulator.c
index 9edc34981ee0..8c5d72869c2b 100644
--- a/drivers/regulator/mt6315-regulator.c
+++ b/drivers/regulator/mt6315-regulator.c
@@ -84,7 +84,7 @@ static unsigned int mt6315_regulator_get_mode(struct regulator_dev *rdev)
 	modeset_mask = init->modeset_mask[rdev_get_id(rdev)];
 	ret = regmap_read(rdev->regmap, MT6315_BUCK_TOP_4PHASE_ANA_CON42, &regval);
 	if (ret != 0) {
-		dev_notice(&rdev->dev, "Failed to get mode: %d\n", ret);
+		dev_err(&rdev->dev, "Failed to get mode: %d\n", ret);
 		return ret;
 	}
 
@@ -93,7 +93,7 @@ static unsigned int mt6315_regulator_get_mode(struct regulator_dev *rdev)
 
 	ret = regmap_read(rdev->regmap, MT6315_BUCK_TOP_CON1, &regval);
 	if (ret != 0) {
-		dev_notice(&rdev->dev, "Failed to get lp mode: %d\n", ret);
+		dev_err(&rdev->dev, "Failed to get lp mode: %d\n", ret);
 		return ret;
 	}
 
@@ -147,12 +147,12 @@ static int mt6315_regulator_set_mode(struct regulator_dev *rdev,
 		break;
 	default:
 		ret = -EINVAL;
-		dev_notice(&rdev->dev, "Unsupported mode: %d\n", mode);
+		dev_err(&rdev->dev, "Unsupported mode: %d\n", mode);
 		break;
 	}
 
 	if (ret != 0) {
-		dev_notice(&rdev->dev, "Failed to set mode: %d\n", ret);
+		dev_err(&rdev->dev, "Failed to set mode: %d\n", ret);
 		return ret;
 	}
 
@@ -168,7 +168,7 @@ static int mt6315_get_status(struct regulator_dev *rdev)
 	info = container_of(rdev->desc, struct mt6315_regulator_info, desc);
 	ret = regmap_read(rdev->regmap, info->status_reg, &regval);
 	if (ret < 0) {
-		dev_notice(&rdev->dev, "Failed to get enable reg: %d\n", ret);
+		dev_err(&rdev->dev, "Failed to get enable reg: %d\n", ret);
 		return ret;
 	}
 
@@ -260,8 +260,9 @@ static int mt6315_regulator_probe(struct spmi_device *pdev)
 		config.driver_data = init_data;
 		rdev = devm_regulator_register(dev, &mt6315_regulators[i].desc, &config);
 		if (IS_ERR(rdev)) {
-			dev_notice(dev, "Failed to register %s\n", mt6315_regulators[i].desc.name);
-			continue;
+			dev_err(dev, "Failed to register %s\n",
+				mt6315_regulators[i].desc.name);
+			return PTR_ERR(rdev);
 		}
 	}
 
@@ -279,7 +280,7 @@ static void mt6315_regulator_shutdown(struct spmi_device *pdev)
 	ret |= regmap_write(chip->regmap, MT6315_TOP_TMA_KEY, 0);
 	ret |= regmap_write(chip->regmap, MT6315_TOP_TMA_KEY_H, 0);
 	if (ret < 0)
-		dev_notice(&pdev->dev, "[%#x] Failed to enable power off sequence. %d\n",
+		dev_err(&pdev->dev, "[%#x] Failed to enable power off sequence. %d\n",
 			   pdev->usid, ret);
 }
 
-- 
cgit v1.2.3-59-g8ed1b


From fbd168cd76e4ea80fc22d361b08267664db4d905 Mon Sep 17 00:00:00 2001
From: Axel Lin <axel.lin@ingics.com>
Date: Thu, 27 May 2021 22:42:48 +0800
Subject: regulator: lp8755: Convert to use regulator_set_ramp_delay_regmap

Use regulator_set_ramp_delay_regmap instead of open-coded.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Link: https://lore.kernel.org/r/20210527144248.247992-1-axel.lin@ingics.com
Signed-off-by: Mark Brown <broonie@kernel.org>
---
 drivers/regulator/lp8755.c | 55 +++++++---------------------------------------
 1 file changed, 8 insertions(+), 47 deletions(-)

(limited to 'drivers/regulator')

diff --git a/drivers/regulator/lp8755.c b/drivers/regulator/lp8755.c
index 13c535711265..321bec6e3f8d 100644
--- a/drivers/regulator/lp8755.c
+++ b/drivers/regulator/lp8755.c
@@ -136,52 +136,9 @@ err_i2c:
 	return 0;
 }
 
-static int lp8755_buck_set_ramp(struct regulator_dev *rdev, int ramp)
-{
-	int ret;
-	unsigned int regval = 0x00;
-	enum lp8755_bucks id = rdev_get_id(rdev);
-
-	/* uV/us */
-	switch (ramp) {
-	case 0 ... 230:
-		regval = 0x07;
-		break;
-	case 231 ... 470:
-		regval = 0x06;
-		break;
-	case 471 ... 940:
-		regval = 0x05;
-		break;
-	case 941 ... 1900:
-		regval = 0x04;
-		break;
-	case 1901 ... 3800:
-		regval = 0x03;
-		break;
-	case 3801 ... 7500:
-		regval = 0x02;
-		break;
-	case 7501 ... 15000:
-		regval = 0x01;
-		break;
-	case 15001 ... 30000:
-		regval = 0x00;
-		break;
-	default:
-		dev_err(&rdev->dev,
-			"Not supported ramp value %d %s\n", ramp, __func__);
-		return -EINVAL;
-	}
-
-	ret = regmap_update_bits(rdev->regmap, 0x07 + id, 0x07, regval);
-	if (ret < 0)
-		goto err_i2c;
-	return ret;
-err_i2c:
-	dev_err(&rdev->dev, "i2c access error %s\n", __func__);
-	return ret;
-}
+static const unsigned int lp8755_buck_ramp_table[] = {
+	30000, 15000, 7500, 3800, 1900, 940, 470, 230
+};
 
 static const struct regulator_ops lp8755_buck_ops = {
 	.map_voltage = regulator_map_voltage_linear,
@@ -194,7 +151,7 @@ static const struct regulator_ops lp8755_buck_ops = {
 	.enable_time = lp8755_buck_enable_time,
 	.set_mode = lp8755_buck_set_mode,
 	.get_mode = lp8755_buck_get_mode,
-	.set_ramp_delay = lp8755_buck_set_ramp,
+	.set_ramp_delay = regulator_set_ramp_delay_regmap,
 };
 
 #define lp8755_rail(_id) "lp8755_buck"#_id
@@ -269,6 +226,10 @@ out_i2c_error:
 	.enable_mask = LP8755_BUCK_EN_M,\
 	.vsel_reg = LP8755_REG_BUCK##_id,\
 	.vsel_mask = LP8755_BUCK_VOUT_M,\
+	.ramp_reg = (LP8755_BUCK##_id) + 0x7,\
+	.ramp_mask = 0x7,\
+	.ramp_delay_table = lp8755_buck_ramp_table,\
+	.n_ramp_values = ARRAY_SIZE(lp8755_buck_ramp_table),\
 }
 
 static const struct regulator_desc lp8755_regulators[] = {
-- 
cgit v1.2.3-59-g8ed1b


From 71de5d6e63c992abe037c43bc581cff432a5a1c4 Mon Sep 17 00:00:00 2001
From: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Date: Thu, 27 May 2021 14:59:29 +0300
Subject: regulator: bd70528: Drop BD70528 support

The only known BD70528 use-cases are such that the PMIC is controlled
from separate MCU which is not running Linux. I am not aware of
any Linux driver users. Furthermore, it seems there is no demand for
this IC. Let's ease the maintenance burden and drop the driver. We can
always add it back if there is sudden need for it.

Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Link: https://lore.kernel.org/r/d7271362129edceebc512b49efed9ee7c3efcb6a.1622116622.git.matti.vaittinen@fi.rohmeurope.com
Signed-off-by: Mark Brown <broonie@kernel.org>
---
 drivers/regulator/Kconfig             |  11 --
 drivers/regulator/Makefile            |   1 -
 drivers/regulator/bd70528-regulator.c | 278 ----------------------------------
 3 files changed, 290 deletions(-)
 delete mode 100644 drivers/regulator/bd70528-regulator.c

(limited to 'drivers/regulator')

diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
index 9aeb32c320aa..bc02ea3ea2ef 100644
--- a/drivers/regulator/Kconfig
+++ b/drivers/regulator/Kconfig
@@ -193,17 +193,6 @@ config REGULATOR_BCM590XX
 	  BCM590xx PMUs. This will enable support for the software
 	  controllable LDO/Switching regulators.
 
-config REGULATOR_BD70528
-	tristate "ROHM BD70528 Power Regulator"
-	depends on MFD_ROHM_BD70528
-	help
-	  This driver supports voltage regulators on ROHM BD70528 PMIC.
-	  This will enable support for the software controllable buck
-	  and LDO regulators.
-
-	  This driver can also be built as a module. If so, the module
-	  will be called bd70528-regulator.
-
 config REGULATOR_BD71815
 	tristate "ROHM BD71815 Power Regulator"
 	depends on MFD_ROHM_BD71828
diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile
index 580b015296ea..6a5d55e209d3 100644
--- a/drivers/regulator/Makefile
+++ b/drivers/regulator/Makefile
@@ -29,7 +29,6 @@ obj-$(CONFIG_REGULATOR_AS3722) += as3722-regulator.o
 obj-$(CONFIG_REGULATOR_ATC260X) += atc260x-regulator.o
 obj-$(CONFIG_REGULATOR_AXP20X) += axp20x-regulator.o
 obj-$(CONFIG_REGULATOR_BCM590XX) += bcm590xx-regulator.o
-obj-$(CONFIG_REGULATOR_BD70528) += bd70528-regulator.o
 obj-$(CONFIG_REGULATOR_BD71815)	+= bd71815-regulator.o
 obj-$(CONFIG_REGULATOR_BD71828) += bd71828-regulator.o
 obj-$(CONFIG_REGULATOR_BD718XX) += bd718x7-regulator.o
diff --git a/drivers/regulator/bd70528-regulator.c b/drivers/regulator/bd70528-regulator.c
deleted file mode 100644
index e6fec70fabfa..000000000000
--- a/drivers/regulator/bd70528-regulator.c
+++ /dev/null
@@ -1,278 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-// Copyright (C) 2018 ROHM Semiconductors
-// bd70528-regulator.c ROHM BD70528MWV regulator driver
-
-#include <linux/delay.h>
-#include <linux/err.h>
-#include <linux/interrupt.h>
-#include <linux/kernel.h>
-#include <linux/mfd/rohm-bd70528.h>
-#include <linux/module.h>
-#include <linux/of.h>
-#include <linux/platform_device.h>
-#include <linux/regmap.h>
-#include <linux/regulator/driver.h>
-#include <linux/regulator/machine.h>
-#include <linux/regulator/of_regulator.h>
-#include <linux/slab.h>
-
-static const struct linear_range bd70528_buck1_volts[] = {
-	REGULATOR_LINEAR_RANGE(1200000, 0x00, 0x1, 600000),
-	REGULATOR_LINEAR_RANGE(2750000, 0x2, 0xf, 50000),
-};
-static const struct linear_range bd70528_buck2_volts[] = {
-	REGULATOR_LINEAR_RANGE(1200000, 0x00, 0x1, 300000),
-	REGULATOR_LINEAR_RANGE(1550000, 0x2, 0xd, 50000),
-	REGULATOR_LINEAR_RANGE(3000000, 0xe, 0xf, 300000),
-};
-static const struct linear_range bd70528_buck3_volts[] = {
-	REGULATOR_LINEAR_RANGE(800000, 0x00, 0xd, 50000),
-	REGULATOR_LINEAR_RANGE(1800000, 0xe, 0xf, 0),
-};
-
-/* All LDOs have same voltage ranges */
-static const struct linear_range bd70528_ldo_volts[] = {
-	REGULATOR_LINEAR_RANGE(1650000, 0x0, 0x07, 50000),
-	REGULATOR_LINEAR_RANGE(2100000, 0x8, 0x0f, 100000),
-	REGULATOR_LINEAR_RANGE(2850000, 0x10, 0x19, 50000),
-	REGULATOR_LINEAR_RANGE(3300000, 0x19, 0x1f, 0),
-};
-
-/* Also both LEDs support same voltages */
-static const unsigned int led_volts[] = {
-	20000, 30000
-};
-
-static const unsigned int bd70528_buck_ramp_table[] = {
-	250, 125
-};
-
-static int bd70528_led_set_voltage_sel(struct regulator_dev *rdev,
-				       unsigned int sel)
-{
-	int ret;
-
-	ret = regulator_is_enabled_regmap(rdev);
-	if (ret < 0)
-		return ret;
-
-	if (ret == 0)
-		return regulator_set_voltage_sel_regmap(rdev, sel);
-
-	dev_err(&rdev->dev,
-		"LED voltage change not allowed when led is enabled\n");
-
-	return -EBUSY;
-}
-
-static const struct regulator_ops bd70528_buck_ops = {
-	.enable = regulator_enable_regmap,
-	.disable = regulator_disable_regmap,
-	.is_enabled = regulator_is_enabled_regmap,
-	.list_voltage = regulator_list_voltage_linear_range,
-	.set_voltage_sel = regulator_set_voltage_sel_regmap,
-	.get_voltage_sel = regulator_get_voltage_sel_regmap,
-	.set_voltage_time_sel = regulator_set_voltage_time_sel,
-	.set_ramp_delay = regulator_set_ramp_delay_regmap,
-};
-
-static const struct regulator_ops bd70528_ldo_ops = {
-	.enable = regulator_enable_regmap,
-	.disable = regulator_disable_regmap,
-	.is_enabled = regulator_is_enabled_regmap,
-	.list_voltage = regulator_list_voltage_linear_range,
-	.set_voltage_sel = regulator_set_voltage_sel_regmap,
-	.get_voltage_sel = regulator_get_voltage_sel_regmap,
-	.set_voltage_time_sel = regulator_set_voltage_time_sel,
-};
-
-static const struct regulator_ops bd70528_led_ops = {
-	.enable = regulator_enable_regmap,
-	.disable = regulator_disable_regmap,
-	.is_enabled = regulator_is_enabled_regmap,
-	.list_voltage = regulator_list_voltage_table,
-	.set_voltage_sel = bd70528_led_set_voltage_sel,
-	.get_voltage_sel = regulator_get_voltage_sel_regmap,
-};
-
-static const struct regulator_desc bd70528_desc[] = {
-	{
-		.name = "buck1",
-		.of_match = of_match_ptr("BUCK1"),
-		.regulators_node = of_match_ptr("regulators"),
-		.id = BD70528_BUCK1,
-		.ops = &bd70528_buck_ops,
-		.type = REGULATOR_VOLTAGE,
-		.linear_ranges = bd70528_buck1_volts,
-		.n_linear_ranges = ARRAY_SIZE(bd70528_buck1_volts),
-		.n_voltages = BD70528_BUCK_VOLTS,
-		.enable_reg = BD70528_REG_BUCK1_EN,
-		.enable_mask = BD70528_MASK_RUN_EN,
-		.vsel_reg = BD70528_REG_BUCK1_VOLT,
-		.vsel_mask = BD70528_MASK_BUCK_VOLT,
-		.ramp_reg = BD70528_REG_BUCK1_VOLT,
-		.ramp_mask = BD70528_MASK_BUCK_RAMP,
-		.ramp_delay_table = bd70528_buck_ramp_table,
-		.n_ramp_values = ARRAY_SIZE(bd70528_buck_ramp_table),
-		.owner = THIS_MODULE,
-	},
-	{
-		.name = "buck2",
-		.of_match = of_match_ptr("BUCK2"),
-		.regulators_node = of_match_ptr("regulators"),
-		.id = BD70528_BUCK2,
-		.ops = &bd70528_buck_ops,
-		.type = REGULATOR_VOLTAGE,
-		.linear_ranges = bd70528_buck2_volts,
-		.n_linear_ranges = ARRAY_SIZE(bd70528_buck2_volts),
-		.n_voltages = BD70528_BUCK_VOLTS,
-		.enable_reg = BD70528_REG_BUCK2_EN,
-		.enable_mask = BD70528_MASK_RUN_EN,
-		.vsel_reg = BD70528_REG_BUCK2_VOLT,
-		.vsel_mask = BD70528_MASK_BUCK_VOLT,
-		.ramp_reg = BD70528_REG_BUCK2_VOLT,
-		.ramp_mask = BD70528_MASK_BUCK_RAMP,
-		.ramp_delay_table = bd70528_buck_ramp_table,
-		.n_ramp_values = ARRAY_SIZE(bd70528_buck_ramp_table),
-		.owner = THIS_MODULE,
-	},
-	{
-		.name = "buck3",
-		.of_match = of_match_ptr("BUCK3"),
-		.regulators_node = of_match_ptr("regulators"),
-		.id = BD70528_BUCK3,
-		.ops = &bd70528_buck_ops,
-		.type = REGULATOR_VOLTAGE,
-		.linear_ranges = bd70528_buck3_volts,
-		.n_linear_ranges = ARRAY_SIZE(bd70528_buck3_volts),
-		.n_voltages = BD70528_BUCK_VOLTS,
-		.enable_reg = BD70528_REG_BUCK3_EN,
-		.enable_mask = BD70528_MASK_RUN_EN,
-		.vsel_reg = BD70528_REG_BUCK3_VOLT,
-		.vsel_mask = BD70528_MASK_BUCK_VOLT,
-		.ramp_reg = BD70528_REG_BUCK3_VOLT,
-		.ramp_mask = BD70528_MASK_BUCK_RAMP,
-		.ramp_delay_table = bd70528_buck_ramp_table,
-		.n_ramp_values = ARRAY_SIZE(bd70528_buck_ramp_table),
-		.owner = THIS_MODULE,
-	},
-	{
-		.name = "ldo1",
-		.of_match = of_match_ptr("LDO1"),
-		.regulators_node = of_match_ptr("regulators"),
-		.id = BD70528_LDO1,
-		.ops = &bd70528_ldo_ops,
-		.type = REGULATOR_VOLTAGE,
-		.linear_ranges = bd70528_ldo_volts,
-		.n_linear_ranges = ARRAY_SIZE(bd70528_ldo_volts),
-		.n_voltages = BD70528_LDO_VOLTS,
-		.enable_reg = BD70528_REG_LDO1_EN,
-		.enable_mask = BD70528_MASK_RUN_EN,
-		.vsel_reg = BD70528_REG_LDO1_VOLT,
-		.vsel_mask = BD70528_MASK_LDO_VOLT,
-		.owner = THIS_MODULE,
-	},
-	{
-		.name = "ldo2",
-		.of_match = of_match_ptr("LDO2"),
-		.regulators_node = of_match_ptr("regulators"),
-		.id = BD70528_LDO2,
-		.ops = &bd70528_ldo_ops,
-		.type = REGULATOR_VOLTAGE,
-		.linear_ranges = bd70528_ldo_volts,
-		.n_linear_ranges = ARRAY_SIZE(bd70528_ldo_volts),
-		.n_voltages = BD70528_LDO_VOLTS,
-		.enable_reg = BD70528_REG_LDO2_EN,
-		.enable_mask = BD70528_MASK_RUN_EN,
-		.vsel_reg = BD70528_REG_LDO2_VOLT,
-		.vsel_mask = BD70528_MASK_LDO_VOLT,
-		.owner = THIS_MODULE,
-	},
-	{
-		.name = "ldo3",
-		.of_match = of_match_ptr("LDO3"),
-		.regulators_node = of_match_ptr("regulators"),
-		.id = BD70528_LDO3,
-		.ops = &bd70528_ldo_ops,
-		.type = REGULATOR_VOLTAGE,
-		.linear_ranges = bd70528_ldo_volts,
-		.n_linear_ranges = ARRAY_SIZE(bd70528_ldo_volts),
-		.n_voltages = BD70528_LDO_VOLTS,
-		.enable_reg = BD70528_REG_LDO3_EN,
-		.enable_mask = BD70528_MASK_RUN_EN,
-		.vsel_reg = BD70528_REG_LDO3_VOLT,
-		.vsel_mask = BD70528_MASK_LDO_VOLT,
-		.owner = THIS_MODULE,
-	},
-	{
-		.name = "ldo_led1",
-		.of_match = of_match_ptr("LDO_LED1"),
-		.regulators_node = of_match_ptr("regulators"),
-		.id = BD70528_LED1,
-		.ops = &bd70528_led_ops,
-		.type = REGULATOR_VOLTAGE,
-		.volt_table = &led_volts[0],
-		.n_voltages = ARRAY_SIZE(led_volts),
-		.enable_reg = BD70528_REG_LED_EN,
-		.enable_mask = BD70528_MASK_LED1_EN,
-		.vsel_reg = BD70528_REG_LED_VOLT,
-		.vsel_mask = BD70528_MASK_LED1_VOLT,
-		.owner = THIS_MODULE,
-	},
-	{
-		.name = "ldo_led2",
-		.of_match = of_match_ptr("LDO_LED2"),
-		.regulators_node = of_match_ptr("regulators"),
-		.id = BD70528_LED2,
-		.ops = &bd70528_led_ops,
-		.type = REGULATOR_VOLTAGE,
-		.volt_table = &led_volts[0],
-		.n_voltages = ARRAY_SIZE(led_volts),
-		.enable_reg = BD70528_REG_LED_EN,
-		.enable_mask = BD70528_MASK_LED2_EN,
-		.vsel_reg = BD70528_REG_LED_VOLT,
-		.vsel_mask = BD70528_MASK_LED2_VOLT,
-		.owner = THIS_MODULE,
-	},
-
-};
-
-static int bd70528_probe(struct platform_device *pdev)
-{
-	int i;
-	struct regulator_config config = {
-		.dev = pdev->dev.parent,
-	};
-
-	config.regmap = dev_get_regmap(pdev->dev.parent, NULL);
-	if (!config.regmap)
-		return -ENODEV;
-
-	for (i = 0; i < ARRAY_SIZE(bd70528_desc); i++) {
-		struct regulator_dev *rdev;
-
-		rdev = devm_regulator_register(&pdev->dev, &bd70528_desc[i],
-					       &config);
-		if (IS_ERR(rdev)) {
-			dev_err(&pdev->dev,
-				"failed to register %s regulator\n",
-				bd70528_desc[i].name);
-			return PTR_ERR(rdev);
-		}
-	}
-	return 0;
-}
-
-static struct platform_driver bd70528_regulator = {
-	.driver = {
-		.name = "bd70528-pmic"
-	},
-	.probe = bd70528_probe,
-};
-
-module_platform_driver(bd70528_regulator);
-
-MODULE_AUTHOR("Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>");
-MODULE_DESCRIPTION("BD70528 voltage regulator driver");
-MODULE_LICENSE("GPL");
-MODULE_ALIAS("platform:bd70528-pmic");
-- 
cgit v1.2.3-59-g8ed1b


From 1d15b3e6f9d95865450c8856401b3166ed074c83 Mon Sep 17 00:00:00 2001
From: Axel Lin <axel.lin@ingics.com>
Date: Wed, 26 May 2021 20:50:25 +0800
Subject: regulator: mcp16502: Convert to use .probe_new

Use the new .probe_new for mcp16502.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Link: https://lore.kernel.org/r/20210526125026.82549-1-axel.lin@ingics.com
Signed-off-by: Mark Brown <broonie@kernel.org>
---
 drivers/regulator/mcp16502.c | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

(limited to 'drivers/regulator')

diff --git a/drivers/regulator/mcp16502.c b/drivers/regulator/mcp16502.c
index 88c6bd5b6c78..ac1b129e33d9 100644
--- a/drivers/regulator/mcp16502.c
+++ b/drivers/regulator/mcp16502.c
@@ -522,8 +522,7 @@ static const struct regmap_config mcp16502_regmap_config = {
 	.wr_table	= &mcp16502_yes_reg_table,
 };
 
-static int mcp16502_probe(struct i2c_client *client,
-			  const struct i2c_device_id *id)
+static int mcp16502_probe(struct i2c_client *client)
 {
 	struct regulator_config config = { };
 	struct regulator_dev *rdev;
@@ -606,7 +605,7 @@ static const struct i2c_device_id mcp16502_i2c_id[] = {
 MODULE_DEVICE_TABLE(i2c, mcp16502_i2c_id);
 
 static struct i2c_driver mcp16502_drv = {
-	.probe		= mcp16502_probe,
+	.probe_new	= mcp16502_probe,
 	.driver		= {
 		.name	= "mcp16502-regulator",
 		.of_match_table	= of_match_ptr(mcp16502_ids),
-- 
cgit v1.2.3-59-g8ed1b


From 96ec5afeb3001dcb432b9c9e8738aa537c6cdb12 Mon Sep 17 00:00:00 2001
From: Axel Lin <axel.lin@ingics.com>
Date: Wed, 26 May 2021 20:50:26 +0800
Subject: regulator: mcp16502: Convert to use regulator_set_ramp_delay_regmap

Use regulator_set_ramp_delay_regmap instead of open-coded.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Link: https://lore.kernel.org/r/20210526125026.82549-2-axel.lin@ingics.com
Signed-off-by: Mark Brown <broonie@kernel.org>
---
 drivers/regulator/mcp16502.c | 74 ++++++++++++++++----------------------------
 1 file changed, 26 insertions(+), 48 deletions(-)

(limited to 'drivers/regulator')

diff --git a/drivers/regulator/mcp16502.c b/drivers/regulator/mcp16502.c
index ac1b129e33d9..042668385678 100644
--- a/drivers/regulator/mcp16502.c
+++ b/drivers/regulator/mcp16502.c
@@ -90,10 +90,14 @@ enum mcp16502_reg {
 };
 
 /* Ramp delay (uV/us) for buck1, ldo1, ldo2. */
-static const int mcp16502_ramp_b1l12[] = { 6250, 3125, 2083, 1563 };
+static const unsigned int mcp16502_ramp_b1l12[] = {
+	6250, 3125, 2083, 1563
+};
 
 /* Ramp delay (uV/us) for buck2, buck3, buck4. */
-static const int mcp16502_ramp_b234[] = { 3125, 1563, 1042, 781 };
+static const unsigned int mcp16502_ramp_b234[] = {
+	3125, 1563, 1042, 781
+};
 
 static unsigned int mcp16502_of_map_mode(unsigned int mode)
 {
@@ -103,7 +107,7 @@ static unsigned int mcp16502_of_map_mode(unsigned int mode)
 	return REGULATOR_MODE_INVALID;
 }
 
-#define MCP16502_REGULATOR(_name, _id, _ranges, _ops)			\
+#define MCP16502_REGULATOR(_name, _id, _ranges, _ops, _ramp_table)	\
 	[_id] = {							\
 		.name			= _name,			\
 		.regulators_node	= of_match_ptr("regulators"),	\
@@ -121,6 +125,10 @@ static unsigned int mcp16502_of_map_mode(unsigned int mode)
 		.vsel_mask		= MCP16502_VSEL,		\
 		.enable_reg		= (((_id) + 1) << 4),		\
 		.enable_mask		= MCP16502_EN,			\
+		.ramp_reg		= MCP16502_REG_BASE(_id, CFG),	\
+		.ramp_mask		= MCP16502_DVSR,		\
+		.ramp_delay_table	= _ramp_table,			\
+		.n_ramp_values		= ARRAY_SIZE(_ramp_table),	\
 	}
 
 enum {
@@ -314,42 +322,6 @@ static int mcp16502_set_voltage_time_sel(struct regulator_dev *rdev,
 	return ret;
 }
 
-static int mcp16502_set_ramp_delay(struct regulator_dev *rdev, int ramp_delay)
-{
-	const int *ramp;
-	int id = rdev_get_id(rdev);
-	unsigned int i, size;
-
-	switch (id) {
-	case BUCK1:
-	case LDO1:
-	case LDO2:
-		ramp = mcp16502_ramp_b1l12;
-		size = ARRAY_SIZE(mcp16502_ramp_b1l12);
-		break;
-
-	case BUCK2:
-	case BUCK3:
-	case BUCK4:
-		ramp = mcp16502_ramp_b234;
-		size = ARRAY_SIZE(mcp16502_ramp_b234);
-		break;
-
-	default:
-		return -EINVAL;
-	}
-
-	for (i = 0; i < size; i++) {
-		if (ramp[i] == ramp_delay)
-			break;
-	}
-	if (i == size)
-		return -EINVAL;
-
-	return regmap_update_bits(rdev->regmap, MCP16502_REG_BASE(id, CFG),
-				  MCP16502_DVSR, (i << 2));
-}
-
 #ifdef CONFIG_SUSPEND
 /*
  * mcp16502_suspend_get_target_reg() - get the reg of the target suspend PMIC
@@ -445,7 +417,7 @@ static const struct regulator_ops mcp16502_buck_ops = {
 	.is_enabled			= regulator_is_enabled_regmap,
 	.get_status			= mcp16502_get_status,
 	.set_voltage_time_sel		= mcp16502_set_voltage_time_sel,
-	.set_ramp_delay			= mcp16502_set_ramp_delay,
+	.set_ramp_delay			= regulator_set_ramp_delay_regmap,
 
 	.set_mode			= mcp16502_set_mode,
 	.get_mode			= mcp16502_get_mode,
@@ -471,7 +443,7 @@ static const struct regulator_ops mcp16502_ldo_ops = {
 	.is_enabled			= regulator_is_enabled_regmap,
 	.get_status			= mcp16502_get_status,
 	.set_voltage_time_sel		= mcp16502_set_voltage_time_sel,
-	.set_ramp_delay			= mcp16502_set_ramp_delay,
+	.set_ramp_delay			= regulator_set_ramp_delay_regmap,
 
 #ifdef CONFIG_SUSPEND
 	.set_suspend_voltage		= mcp16502_set_suspend_voltage,
@@ -495,13 +467,19 @@ static const struct linear_range b234_ranges[] = {
 };
 
 static const struct regulator_desc mcp16502_desc[] = {
-	/* MCP16502_REGULATOR(_name, _id, ranges, regulator_ops) */
-	MCP16502_REGULATOR("VDD_IO", BUCK1, b1l12_ranges, mcp16502_buck_ops),
-	MCP16502_REGULATOR("VDD_DDR", BUCK2, b234_ranges, mcp16502_buck_ops),
-	MCP16502_REGULATOR("VDD_CORE", BUCK3, b234_ranges, mcp16502_buck_ops),
-	MCP16502_REGULATOR("VDD_OTHER", BUCK4, b234_ranges, mcp16502_buck_ops),
-	MCP16502_REGULATOR("LDO1", LDO1, b1l12_ranges, mcp16502_ldo_ops),
-	MCP16502_REGULATOR("LDO2", LDO2, b1l12_ranges, mcp16502_ldo_ops)
+	/* MCP16502_REGULATOR(_name, _id, ranges, regulator_ops, ramp_table) */
+	MCP16502_REGULATOR("VDD_IO", BUCK1, b1l12_ranges, mcp16502_buck_ops,
+			   mcp16502_ramp_b1l12),
+	MCP16502_REGULATOR("VDD_DDR", BUCK2, b234_ranges, mcp16502_buck_ops,
+			   mcp16502_ramp_b234),
+	MCP16502_REGULATOR("VDD_CORE", BUCK3, b234_ranges, mcp16502_buck_ops,
+			   mcp16502_ramp_b234),
+	MCP16502_REGULATOR("VDD_OTHER", BUCK4, b234_ranges, mcp16502_buck_ops,
+			   mcp16502_ramp_b234),
+	MCP16502_REGULATOR("LDO1", LDO1, b1l12_ranges, mcp16502_ldo_ops,
+			   mcp16502_ramp_b1l12),
+	MCP16502_REGULATOR("LDO2", LDO2, b1l12_ranges, mcp16502_ldo_ops,
+			   mcp16502_ramp_b1l12)
 };
 
 static const struct regmap_range mcp16502_ranges[] = {
-- 
cgit v1.2.3-59-g8ed1b


From d7a58decc7049e8ca9707b63fcc2556cde3d26c5 Mon Sep 17 00:00:00 2001
From: Wen Su <wen.su@mediatek.com>
Date: Wed, 26 May 2021 14:52:05 +0800
Subject: regulator: mt6359: Add support for MT6359 regulator

The MT6359 is a regulator found on boards based on MediaTek MT6779 and
probably other SoCs. It is a so called pmic and connects as a slave to
SoC using SPI, wrapped inside the pmic-wrapper.

Signed-off-by: Wen Su <wen.su@mediatek.com>
Signed-off-by: Hsin-Hsiung Wang <hsin-hsiung.wang@mediatek.com>
Acked-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
---
 drivers/regulator/Kconfig                  |   9 +
 drivers/regulator/Makefile                 |   1 +
 drivers/regulator/mt6359-regulator.c       | 669 +++++++++++++++++++++++++++++
 include/linux/regulator/mt6359-regulator.h |  58 +++
 4 files changed, 737 insertions(+)
 create mode 100644 drivers/regulator/mt6359-regulator.c
 create mode 100644 include/linux/regulator/mt6359-regulator.h

(limited to 'drivers/regulator')

diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
index 9d84d9245490..1ef47c9fb336 100644
--- a/drivers/regulator/Kconfig
+++ b/drivers/regulator/Kconfig
@@ -779,6 +779,15 @@ config REGULATOR_MT6358
 	  This driver supports the control of different power rails of device
 	  through regulator interface.
 
+config REGULATOR_MT6359
+	tristate "MediaTek MT6359 PMIC"
+	depends on MFD_MT6397
+	help
+	  Say y here to select this option to enable the power regulator of
+	  MediaTek MT6359 PMIC.
+	  This driver supports the control of different power rails of device
+	  through regulator interface.
+
 config REGULATOR_MT6360
 	tristate "MT6360 SubPMIC Regulator"
 	depends on MFD_MT6360
diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile
index 580b015296ea..4f4d99622db8 100644
--- a/drivers/regulator/Makefile
+++ b/drivers/regulator/Makefile
@@ -94,6 +94,7 @@ obj-$(CONFIG_REGULATOR_MT6311) += mt6311-regulator.o
 obj-$(CONFIG_REGULATOR_MT6315) += mt6315-regulator.o
 obj-$(CONFIG_REGULATOR_MT6323)	+= mt6323-regulator.o
 obj-$(CONFIG_REGULATOR_MT6358)	+= mt6358-regulator.o
+obj-$(CONFIG_REGULATOR_MT6359)	+= mt6359-regulator.o
 obj-$(CONFIG_REGULATOR_MT6360) += mt6360-regulator.o
 obj-$(CONFIG_REGULATOR_MT6380)	+= mt6380-regulator.o
 obj-$(CONFIG_REGULATOR_MT6397)	+= mt6397-regulator.o
diff --git a/drivers/regulator/mt6359-regulator.c b/drivers/regulator/mt6359-regulator.c
new file mode 100644
index 000000000000..994d3f67f73d
--- /dev/null
+++ b/drivers/regulator/mt6359-regulator.c
@@ -0,0 +1,669 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (c) 2021 MediaTek Inc.
+
+#include <linux/platform_device.h>
+#include <linux/mfd/mt6359/registers.h>
+#include <linux/mfd/mt6397/core.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/regmap.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/machine.h>
+#include <linux/regulator/mt6359-regulator.h>
+#include <linux/regulator/of_regulator.h>
+
+#define MT6359_BUCK_MODE_AUTO		0
+#define MT6359_BUCK_MODE_FORCE_PWM	1
+#define MT6359_BUCK_MODE_NORMAL		0
+#define MT6359_BUCK_MODE_LP		2
+
+/*
+ * MT6359 regulators' information
+ *
+ * @desc: standard fields of regulator description.
+ * @status_reg: for query status of regulators.
+ * @qi: Mask for query enable signal status of regulators.
+ * @modeset_reg: for operating AUTO/PWM mode register.
+ * @modeset_mask: MASK for operating modeset register.
+ * @modeset_shift: SHIFT for operating modeset register.
+ */
+struct mt6359_regulator_info {
+	struct regulator_desc desc;
+	u32 status_reg;
+	u32 qi;
+	u32 modeset_reg;
+	u32 modeset_mask;
+	u32 modeset_shift;
+	u32 lp_mode_reg;
+	u32 lp_mode_mask;
+	u32 lp_mode_shift;
+};
+
+#define MT6359_BUCK(match, _name, min, max, step, min_sel,	\
+	volt_ranges, _enable_reg, _status_reg,			\
+	_vsel_reg, _vsel_mask,					\
+	_lp_mode_reg, _lp_mode_shift,				\
+	_modeset_reg, _modeset_shift)				\
+[MT6359_ID_##_name] = {						\
+	.desc = {						\
+		.name = #_name,					\
+		.of_match = of_match_ptr(match),		\
+		.regulators_node = of_match_ptr("regulators"),	\
+		.ops = &mt6359_volt_range_ops,			\
+		.type = REGULATOR_VOLTAGE,			\
+		.id = MT6359_ID_##_name,			\
+		.owner = THIS_MODULE,				\
+		.uV_step = (step),				\
+		.linear_min_sel = (min_sel),			\
+		.n_voltages = ((max) - (min)) / (step) + 1,	\
+		.min_uV = (min),				\
+		.linear_ranges = volt_ranges,			\
+		.n_linear_ranges = ARRAY_SIZE(volt_ranges),	\
+		.vsel_reg = _vsel_reg,				\
+		.vsel_mask = _vsel_mask,			\
+		.enable_reg = _enable_reg,			\
+		.enable_mask = BIT(0),				\
+		.of_map_mode = mt6359_map_mode,			\
+	},							\
+	.status_reg = _status_reg,				\
+	.qi = BIT(0),						\
+	.lp_mode_reg = _lp_mode_reg,				\
+	.lp_mode_mask = BIT(_lp_mode_shift),			\
+	.lp_mode_shift = _lp_mode_shift,			\
+	.modeset_reg = _modeset_reg,				\
+	.modeset_mask = BIT(_modeset_shift),			\
+	.modeset_shift = _modeset_shift				\
+}
+
+#define MT6359_LDO_LINEAR(match, _name, min, max, step, min_sel,\
+	volt_ranges, _enable_reg, _status_reg,			\
+	_vsel_reg, _vsel_mask)					\
+[MT6359_ID_##_name] = {						\
+	.desc = {						\
+		.name = #_name,					\
+		.of_match = of_match_ptr(match),		\
+		.regulators_node = of_match_ptr("regulators"),	\
+		.ops = &mt6359_volt_range_ops,			\
+		.type = REGULATOR_VOLTAGE,			\
+		.id = MT6359_ID_##_name,			\
+		.owner = THIS_MODULE,				\
+		.uV_step = (step),				\
+		.linear_min_sel = (min_sel),			\
+		.n_voltages = ((max) - (min)) / (step) + 1,	\
+		.min_uV = (min),				\
+		.linear_ranges = volt_ranges,			\
+		.n_linear_ranges = ARRAY_SIZE(volt_ranges),	\
+		.vsel_reg = _vsel_reg,				\
+		.vsel_mask = _vsel_mask,			\
+		.enable_reg = _enable_reg,			\
+		.enable_mask = BIT(0),				\
+	},							\
+	.status_reg = _status_reg,				\
+	.qi = BIT(0),						\
+}
+
+#define MT6359_LDO(match, _name, _volt_table,			\
+	_enable_reg, _enable_mask, _status_reg,			\
+	_vsel_reg, _vsel_mask, _en_delay)			\
+[MT6359_ID_##_name] = {						\
+	.desc = {						\
+		.name = #_name,					\
+		.of_match = of_match_ptr(match),		\
+		.regulators_node = of_match_ptr("regulators"),	\
+		.ops = &mt6359_volt_table_ops,			\
+		.type = REGULATOR_VOLTAGE,			\
+		.id = MT6359_ID_##_name,			\
+		.owner = THIS_MODULE,				\
+		.n_voltages = ARRAY_SIZE(_volt_table),		\
+		.volt_table = _volt_table,			\
+		.vsel_reg = _vsel_reg,				\
+		.vsel_mask = _vsel_mask,			\
+		.enable_reg = _enable_reg,			\
+		.enable_mask = BIT(_enable_mask),		\
+		.enable_time = _en_delay,			\
+	},							\
+	.status_reg = _status_reg,				\
+	.qi = BIT(0),						\
+}
+
+#define MT6359_REG_FIXED(match, _name, _enable_reg,	\
+	_status_reg, _fixed_volt)			\
+[MT6359_ID_##_name] = {					\
+	.desc = {					\
+		.name = #_name,				\
+		.of_match = of_match_ptr(match),	\
+		.regulators_node = of_match_ptr("regulators"),	\
+		.ops = &mt6359_volt_fixed_ops,		\
+		.type = REGULATOR_VOLTAGE,		\
+		.id = MT6359_ID_##_name,		\
+		.owner = THIS_MODULE,			\
+		.n_voltages = 1,			\
+		.enable_reg = _enable_reg,		\
+		.enable_mask = BIT(0),			\
+		.fixed_uV = (_fixed_volt),		\
+	},						\
+	.status_reg = _status_reg,			\
+	.qi = BIT(0),					\
+}
+
+static const struct linear_range mt_volt_range1[] = {
+	REGULATOR_LINEAR_RANGE(800000, 0, 0x70, 12500),
+};
+
+static const struct linear_range mt_volt_range2[] = {
+	REGULATOR_LINEAR_RANGE(400000, 0, 0x7f, 6250),
+};
+
+static const struct linear_range mt_volt_range3[] = {
+	REGULATOR_LINEAR_RANGE(400000, 0, 0x70, 6250),
+};
+
+static const struct linear_range mt_volt_range4[] = {
+	REGULATOR_LINEAR_RANGE(800000, 0, 0x40, 12500),
+};
+
+static const struct linear_range mt_volt_range5[] = {
+	REGULATOR_LINEAR_RANGE(500000, 0, 0x3F, 50000),
+};
+
+static const struct linear_range mt_volt_range6[] = {
+	REGULATOR_LINEAR_RANGE(500000, 0, 0x7f, 6250),
+};
+
+static const struct linear_range mt_volt_range7[] = {
+	REGULATOR_LINEAR_RANGE(500000, 0, 0x7f, 6250),
+};
+
+static const u32 vsim1_voltages[] = {
+	0, 0, 0, 1700000, 1800000, 0, 0, 0, 2700000, 0, 0, 3000000, 3100000,
+};
+
+static const u32 vibr_voltages[] = {
+	1200000, 1300000, 1500000, 0, 1800000, 2000000, 0, 0, 2700000, 2800000,
+	0, 3000000, 0, 3300000,
+};
+
+static const u32 vrf12_voltages[] = {
+	0, 0, 1100000, 1200000,	1300000,
+};
+
+static const u32 volt18_voltages[] = {
+	0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1700000, 1800000, 1900000,
+};
+
+static const u32 vcn13_voltages[] = {
+	900000, 1000000, 0, 1200000, 1300000,
+};
+
+static const u32 vcn33_voltages[] = {
+	0, 0, 0, 0, 0, 0, 0, 0, 0, 2800000, 0, 0, 0, 3300000, 3400000, 3500000,
+};
+
+static const u32 vefuse_voltages[] = {
+	0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1700000, 1800000, 1900000, 2000000,
+};
+
+static const u32 vxo22_voltages[] = {
+	1800000, 0, 0, 0, 2200000,
+};
+
+static const u32 vrfck_voltages[] = {
+	0, 0, 1500000, 0, 0, 0, 0, 1600000, 0, 0, 0, 0, 1700000,
+};
+
+static const u32 vio28_voltages[] = {
+	0, 0, 0, 0, 0, 0, 0, 0, 0, 2800000, 2900000, 3000000, 3100000, 3300000,
+};
+
+static const u32 vemc_voltages[] = {
+	0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 2900000, 3000000, 0, 3300000,
+};
+
+static const u32 va12_voltages[] = {
+	0, 0, 0, 0, 0, 0, 1200000, 1300000,
+};
+
+static const u32 va09_voltages[] = {
+	0, 0, 800000, 900000, 0, 0, 1200000,
+};
+
+static const u32 vrf18_voltages[] = {
+	0, 0, 0, 0, 0, 1700000, 1800000, 1810000,
+};
+
+static const u32 vbbck_voltages[] = {
+	0, 0, 0, 0, 1100000, 0, 0, 0, 1150000, 0, 0, 0, 1200000,
+};
+
+static const u32 vsim2_voltages[] = {
+	0, 0, 0, 1700000, 1800000, 0, 0, 0, 2700000, 0, 0, 3000000, 3100000,
+};
+
+static inline unsigned int mt6359_map_mode(unsigned int mode)
+{
+	switch (mode) {
+	case MT6359_BUCK_MODE_NORMAL:
+		return REGULATOR_MODE_NORMAL;
+	case MT6359_BUCK_MODE_FORCE_PWM:
+		return REGULATOR_MODE_FAST;
+	case MT6359_BUCK_MODE_LP:
+		return REGULATOR_MODE_IDLE;
+	default:
+		return REGULATOR_MODE_INVALID;
+	}
+}
+
+static int mt6359_get_status(struct regulator_dev *rdev)
+{
+	int ret;
+	u32 regval;
+	struct mt6359_regulator_info *info = rdev_get_drvdata(rdev);
+
+	ret = regmap_read(rdev->regmap, info->status_reg, &regval);
+	if (ret != 0) {
+		dev_err(&rdev->dev, "Failed to get enable reg: %d\n", ret);
+		return ret;
+	}
+
+	if (regval & info->qi)
+		return REGULATOR_STATUS_ON;
+	else
+		return REGULATOR_STATUS_OFF;
+}
+
+static unsigned int mt6359_regulator_get_mode(struct regulator_dev *rdev)
+{
+	struct mt6359_regulator_info *info = rdev_get_drvdata(rdev);
+	int ret, regval;
+
+	ret = regmap_read(rdev->regmap, info->modeset_reg, &regval);
+	if (ret != 0) {
+		dev_err(&rdev->dev,
+			"Failed to get mt6359 buck mode: %d\n", ret);
+		return ret;
+	}
+
+	if ((regval & info->modeset_mask) >> info->modeset_shift ==
+		MT6359_BUCK_MODE_FORCE_PWM)
+		return REGULATOR_MODE_FAST;
+
+	ret = regmap_read(rdev->regmap, info->lp_mode_reg, &regval);
+	if (ret != 0) {
+		dev_err(&rdev->dev,
+			"Failed to get mt6359 buck lp mode: %d\n", ret);
+		return ret;
+	}
+
+	if (regval & info->lp_mode_mask)
+		return REGULATOR_MODE_IDLE;
+	else
+		return REGULATOR_MODE_NORMAL;
+}
+
+static int mt6359_regulator_set_mode(struct regulator_dev *rdev,
+				     unsigned int mode)
+{
+	struct mt6359_regulator_info *info = rdev_get_drvdata(rdev);
+	int ret = 0, val;
+	int curr_mode;
+
+	curr_mode = mt6359_regulator_get_mode(rdev);
+	switch (mode) {
+	case REGULATOR_MODE_FAST:
+		val = MT6359_BUCK_MODE_FORCE_PWM;
+		val <<= info->modeset_shift;
+		ret = regmap_update_bits(rdev->regmap,
+					 info->modeset_reg,
+					 info->modeset_mask,
+					 val);
+		break;
+	case REGULATOR_MODE_NORMAL:
+		if (curr_mode == REGULATOR_MODE_FAST) {
+			val = MT6359_BUCK_MODE_AUTO;
+			val <<= info->modeset_shift;
+			ret = regmap_update_bits(rdev->regmap,
+						 info->modeset_reg,
+						 info->modeset_mask,
+						 val);
+		} else if (curr_mode == REGULATOR_MODE_IDLE) {
+			val = MT6359_BUCK_MODE_NORMAL;
+			val <<= info->lp_mode_shift;
+			ret = regmap_update_bits(rdev->regmap,
+						 info->lp_mode_reg,
+						 info->lp_mode_mask,
+						 val);
+			udelay(100);
+		}
+		break;
+	case REGULATOR_MODE_IDLE:
+		val = MT6359_BUCK_MODE_LP >> 1;
+		val <<= info->lp_mode_shift;
+		ret = regmap_update_bits(rdev->regmap,
+					 info->lp_mode_reg,
+					 info->lp_mode_mask,
+					 val);
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	if (ret != 0) {
+		dev_err(&rdev->dev,
+			"Failed to set mt6359 buck mode: %d\n", ret);
+	}
+
+	return ret;
+}
+
+static const struct regulator_ops mt6359_volt_range_ops = {
+	.list_voltage = regulator_list_voltage_linear_range,
+	.map_voltage = regulator_map_voltage_linear_range,
+	.set_voltage_sel = regulator_set_voltage_sel_regmap,
+	.get_voltage_sel = regulator_get_voltage_sel_regmap,
+	.set_voltage_time_sel = regulator_set_voltage_time_sel,
+	.enable = regulator_enable_regmap,
+	.disable = regulator_disable_regmap,
+	.is_enabled = regulator_is_enabled_regmap,
+	.get_status = mt6359_get_status,
+	.set_mode = mt6359_regulator_set_mode,
+	.get_mode = mt6359_regulator_get_mode,
+};
+
+static const struct regulator_ops mt6359_volt_table_ops = {
+	.list_voltage = regulator_list_voltage_table,
+	.map_voltage = regulator_map_voltage_iterate,
+	.set_voltage_sel = regulator_set_voltage_sel_regmap,
+	.get_voltage_sel = regulator_get_voltage_sel_regmap,
+	.set_voltage_time_sel = regulator_set_voltage_time_sel,
+	.enable = regulator_enable_regmap,
+	.disable = regulator_disable_regmap,
+	.is_enabled = regulator_is_enabled_regmap,
+	.get_status = mt6359_get_status,
+};
+
+static const struct regulator_ops mt6359_volt_fixed_ops = {
+	.enable = regulator_enable_regmap,
+	.disable = regulator_disable_regmap,
+	.is_enabled = regulator_is_enabled_regmap,
+	.get_status = mt6359_get_status,
+};
+
+/* The array is indexed by id(MT6359_ID_XXX) */
+static struct mt6359_regulator_info mt6359_regulators[] = {
+	MT6359_BUCK("buck_vs1", VS1, 800000, 2200000, 12500, 0,
+		    mt_volt_range1, MT6359_RG_BUCK_VS1_EN_ADDR,
+		    MT6359_DA_VS1_EN_ADDR, MT6359_RG_BUCK_VS1_VOSEL_ADDR,
+		    MT6359_RG_BUCK_VS1_VOSEL_MASK <<
+		    MT6359_RG_BUCK_VS1_VOSEL_SHIFT,
+		    MT6359_RG_BUCK_VS1_LP_ADDR, MT6359_RG_BUCK_VS1_LP_SHIFT,
+		    MT6359_RG_VS1_FPWM_ADDR, MT6359_RG_VS1_FPWM_SHIFT),
+	MT6359_BUCK("buck_vgpu11", VGPU11, 400000, 1193750, 6250, 0,
+		    mt_volt_range2, MT6359_RG_BUCK_VGPU11_EN_ADDR,
+		    MT6359_DA_VGPU11_EN_ADDR, MT6359_RG_BUCK_VGPU11_VOSEL_ADDR,
+		    MT6359_RG_BUCK_VGPU11_VOSEL_MASK <<
+		    MT6359_RG_BUCK_VGPU11_VOSEL_SHIFT,
+		    MT6359_RG_BUCK_VGPU11_LP_ADDR,
+		    MT6359_RG_BUCK_VGPU11_LP_SHIFT,
+		    MT6359_RG_VGPU11_FCCM_ADDR, MT6359_RG_VGPU11_FCCM_SHIFT),
+	MT6359_BUCK("buck_vmodem", VMODEM, 400000, 1100000, 6250, 0,
+		    mt_volt_range3, MT6359_RG_BUCK_VMODEM_EN_ADDR,
+		    MT6359_DA_VMODEM_EN_ADDR, MT6359_RG_BUCK_VMODEM_VOSEL_ADDR,
+		    MT6359_RG_BUCK_VMODEM_VOSEL_MASK <<
+		    MT6359_RG_BUCK_VMODEM_VOSEL_SHIFT,
+		    MT6359_RG_BUCK_VMODEM_LP_ADDR,
+		    MT6359_RG_BUCK_VMODEM_LP_SHIFT,
+		    MT6359_RG_VMODEM_FCCM_ADDR, MT6359_RG_VMODEM_FCCM_SHIFT),
+	MT6359_BUCK("buck_vpu", VPU, 400000, 1193750, 6250, 0,
+		    mt_volt_range2, MT6359_RG_BUCK_VPU_EN_ADDR,
+		    MT6359_DA_VPU_EN_ADDR, MT6359_RG_BUCK_VPU_VOSEL_ADDR,
+		    MT6359_RG_BUCK_VPU_VOSEL_MASK <<
+		    MT6359_RG_BUCK_VPU_VOSEL_SHIFT,
+		    MT6359_RG_BUCK_VPU_LP_ADDR, MT6359_RG_BUCK_VPU_LP_SHIFT,
+		    MT6359_RG_VPU_FCCM_ADDR, MT6359_RG_VPU_FCCM_SHIFT),
+	MT6359_BUCK("buck_vcore", VCORE, 400000, 1193750, 6250, 0,
+		    mt_volt_range2, MT6359_RG_BUCK_VCORE_EN_ADDR,
+		    MT6359_DA_VCORE_EN_ADDR, MT6359_RG_BUCK_VCORE_VOSEL_ADDR,
+		    MT6359_RG_BUCK_VCORE_VOSEL_MASK <<
+		    MT6359_RG_BUCK_VCORE_VOSEL_SHIFT,
+		    MT6359_RG_BUCK_VCORE_LP_ADDR, MT6359_RG_BUCK_VCORE_LP_SHIFT,
+		    MT6359_RG_VCORE_FCCM_ADDR, MT6359_RG_VCORE_FCCM_SHIFT),
+	MT6359_BUCK("buck_vs2", VS2, 800000, 1600000, 12500, 0,
+		    mt_volt_range4, MT6359_RG_BUCK_VS2_EN_ADDR,
+		    MT6359_DA_VS2_EN_ADDR, MT6359_RG_BUCK_VS2_VOSEL_ADDR,
+		    MT6359_RG_BUCK_VS2_VOSEL_MASK <<
+		    MT6359_RG_BUCK_VS2_VOSEL_SHIFT,
+		    MT6359_RG_BUCK_VS2_LP_ADDR, MT6359_RG_BUCK_VS2_LP_SHIFT,
+		    MT6359_RG_VS2_FPWM_ADDR, MT6359_RG_VS2_FPWM_SHIFT),
+	MT6359_BUCK("buck_vpa", VPA, 500000, 3650000, 50000, 0,
+		    mt_volt_range5, MT6359_RG_BUCK_VPA_EN_ADDR,
+		    MT6359_DA_VPA_EN_ADDR, MT6359_RG_BUCK_VPA_VOSEL_ADDR,
+		    MT6359_RG_BUCK_VPA_VOSEL_MASK <<
+		    MT6359_RG_BUCK_VPA_VOSEL_SHIFT,
+		    MT6359_RG_BUCK_VPA_LP_ADDR, MT6359_RG_BUCK_VPA_LP_SHIFT,
+		    MT6359_RG_VPA_MODESET_ADDR, MT6359_RG_VPA_MODESET_SHIFT),
+	MT6359_BUCK("buck_vproc2", VPROC2, 400000, 1193750, 6250, 0,
+		    mt_volt_range2, MT6359_RG_BUCK_VPROC2_EN_ADDR,
+		    MT6359_DA_VPROC2_EN_ADDR, MT6359_RG_BUCK_VPROC2_VOSEL_ADDR,
+		    MT6359_RG_BUCK_VPROC2_VOSEL_MASK <<
+		    MT6359_RG_BUCK_VPROC2_VOSEL_SHIFT,
+		    MT6359_RG_BUCK_VPROC2_LP_ADDR,
+		    MT6359_RG_BUCK_VPROC2_LP_SHIFT,
+		    MT6359_RG_VPROC2_FCCM_ADDR, MT6359_RG_VPROC2_FCCM_SHIFT),
+	MT6359_BUCK("buck_vproc1", VPROC1, 400000, 1193750, 6250, 0,
+		    mt_volt_range2, MT6359_RG_BUCK_VPROC1_EN_ADDR,
+		    MT6359_DA_VPROC1_EN_ADDR, MT6359_RG_BUCK_VPROC1_VOSEL_ADDR,
+		    MT6359_RG_BUCK_VPROC1_VOSEL_MASK <<
+		    MT6359_RG_BUCK_VPROC1_VOSEL_SHIFT,
+		    MT6359_RG_BUCK_VPROC1_LP_ADDR,
+		    MT6359_RG_BUCK_VPROC1_LP_SHIFT,
+		    MT6359_RG_VPROC1_FCCM_ADDR, MT6359_RG_VPROC1_FCCM_SHIFT),
+	MT6359_BUCK("buck_vcore_sshub", VCORE_SSHUB, 400000, 1193750, 6250, 0,
+		    mt_volt_range2, MT6359_RG_BUCK_VCORE_SSHUB_EN_ADDR,
+		    MT6359_DA_VCORE_EN_ADDR,
+		    MT6359_RG_BUCK_VCORE_SSHUB_VOSEL_ADDR,
+		    MT6359_RG_BUCK_VCORE_SSHUB_VOSEL_MASK <<
+		    MT6359_RG_BUCK_VCORE_SSHUB_VOSEL_SHIFT,
+		    MT6359_RG_BUCK_VCORE_LP_ADDR, MT6359_RG_BUCK_VCORE_LP_SHIFT,
+		    MT6359_RG_VCORE_FCCM_ADDR, MT6359_RG_VCORE_FCCM_SHIFT),
+	MT6359_REG_FIXED("ldo_vaud18", VAUD18, MT6359_RG_LDO_VAUD18_EN_ADDR,
+			 MT6359_DA_VAUD18_B_EN_ADDR, 1800000),
+	MT6359_LDO("ldo_vsim1", VSIM1, vsim1_voltages,
+		   MT6359_RG_LDO_VSIM1_EN_ADDR, MT6359_RG_LDO_VSIM1_EN_SHIFT,
+		   MT6359_DA_VSIM1_B_EN_ADDR, MT6359_RG_VSIM1_VOSEL_ADDR,
+		   MT6359_RG_VSIM1_VOSEL_MASK << MT6359_RG_VSIM1_VOSEL_SHIFT,
+		   480),
+	MT6359_LDO("ldo_vibr", VIBR, vibr_voltages,
+		   MT6359_RG_LDO_VIBR_EN_ADDR, MT6359_RG_LDO_VIBR_EN_SHIFT,
+		   MT6359_DA_VIBR_B_EN_ADDR, MT6359_RG_VIBR_VOSEL_ADDR,
+		   MT6359_RG_VIBR_VOSEL_MASK << MT6359_RG_VIBR_VOSEL_SHIFT,
+		   240),
+	MT6359_LDO("ldo_vrf12", VRF12, vrf12_voltages,
+		   MT6359_RG_LDO_VRF12_EN_ADDR, MT6359_RG_LDO_VRF12_EN_SHIFT,
+		   MT6359_DA_VRF12_B_EN_ADDR, MT6359_RG_VRF12_VOSEL_ADDR,
+		   MT6359_RG_VRF12_VOSEL_MASK << MT6359_RG_VRF12_VOSEL_SHIFT,
+		   120),
+	MT6359_REG_FIXED("ldo_vusb", VUSB, MT6359_RG_LDO_VUSB_EN_0_ADDR,
+			 MT6359_DA_VUSB_B_EN_ADDR, 3000000),
+	MT6359_LDO_LINEAR("ldo_vsram_proc2", VSRAM_PROC2, 500000, 1293750, 6250,
+			  0, mt_volt_range6, MT6359_RG_LDO_VSRAM_PROC2_EN_ADDR,
+			  MT6359_DA_VSRAM_PROC2_B_EN_ADDR,
+			  MT6359_RG_LDO_VSRAM_PROC2_VOSEL_ADDR,
+			  MT6359_RG_LDO_VSRAM_PROC2_VOSEL_MASK <<
+			  MT6359_RG_LDO_VSRAM_PROC2_VOSEL_SHIFT),
+	MT6359_LDO("ldo_vio18", VIO18, volt18_voltages,
+		   MT6359_RG_LDO_VIO18_EN_ADDR, MT6359_RG_LDO_VIO18_EN_SHIFT,
+		   MT6359_DA_VIO18_B_EN_ADDR, MT6359_RG_VIO18_VOSEL_ADDR,
+		   MT6359_RG_VIO18_VOSEL_MASK << MT6359_RG_VIO18_VOSEL_SHIFT,
+		   960),
+	MT6359_LDO("ldo_vcamio", VCAMIO, volt18_voltages,
+		   MT6359_RG_LDO_VCAMIO_EN_ADDR, MT6359_RG_LDO_VCAMIO_EN_SHIFT,
+		   MT6359_DA_VCAMIO_B_EN_ADDR, MT6359_RG_VCAMIO_VOSEL_ADDR,
+		   MT6359_RG_VCAMIO_VOSEL_MASK << MT6359_RG_VCAMIO_VOSEL_SHIFT,
+		   1290),
+	MT6359_REG_FIXED("ldo_vcn18", VCN18, MT6359_RG_LDO_VCN18_EN_ADDR,
+			 MT6359_DA_VCN18_B_EN_ADDR, 1800000),
+	MT6359_REG_FIXED("ldo_vfe28", VFE28, MT6359_RG_LDO_VFE28_EN_ADDR,
+			 MT6359_DA_VFE28_B_EN_ADDR, 2800000),
+	MT6359_LDO("ldo_vcn13", VCN13, vcn13_voltages,
+		   MT6359_RG_LDO_VCN13_EN_ADDR, MT6359_RG_LDO_VCN13_EN_SHIFT,
+		   MT6359_DA_VCN13_B_EN_ADDR, MT6359_RG_VCN13_VOSEL_ADDR,
+		   MT6359_RG_VCN13_VOSEL_MASK << MT6359_RG_VCN13_VOSEL_SHIFT,
+		   240),
+	MT6359_LDO("ldo_vcn33_1_bt", VCN33_1_BT, vcn33_voltages,
+		   MT6359_RG_LDO_VCN33_1_EN_0_ADDR,
+		   MT6359_RG_LDO_VCN33_1_EN_0_SHIFT,
+		   MT6359_DA_VCN33_1_B_EN_ADDR, MT6359_RG_VCN33_1_VOSEL_ADDR,
+		   MT6359_RG_VCN33_1_VOSEL_MASK <<
+		   MT6359_RG_VCN33_1_VOSEL_SHIFT, 240),
+	MT6359_LDO("ldo_vcn33_1_wifi", VCN33_1_WIFI, vcn33_voltages,
+		   MT6359_RG_LDO_VCN33_1_EN_1_ADDR,
+		   MT6359_RG_LDO_VCN33_1_EN_1_SHIFT,
+		   MT6359_DA_VCN33_1_B_EN_ADDR, MT6359_RG_VCN33_1_VOSEL_ADDR,
+		   MT6359_RG_VCN33_1_VOSEL_MASK <<
+		   MT6359_RG_VCN33_1_VOSEL_SHIFT, 240),
+	MT6359_REG_FIXED("ldo_vaux18", VAUX18, MT6359_RG_LDO_VAUX18_EN_ADDR,
+			 MT6359_DA_VAUX18_B_EN_ADDR, 1800000),
+	MT6359_LDO_LINEAR("ldo_vsram_others", VSRAM_OTHERS, 500000, 1293750,
+			  6250, 0, mt_volt_range6,
+			  MT6359_RG_LDO_VSRAM_OTHERS_EN_ADDR,
+			  MT6359_DA_VSRAM_OTHERS_B_EN_ADDR,
+			  MT6359_RG_LDO_VSRAM_OTHERS_VOSEL_ADDR,
+			  MT6359_RG_LDO_VSRAM_OTHERS_VOSEL_MASK <<
+			  MT6359_RG_LDO_VSRAM_OTHERS_VOSEL_SHIFT),
+	MT6359_LDO("ldo_vefuse", VEFUSE, vefuse_voltages,
+		   MT6359_RG_LDO_VEFUSE_EN_ADDR, MT6359_RG_LDO_VEFUSE_EN_SHIFT,
+		   MT6359_DA_VEFUSE_B_EN_ADDR, MT6359_RG_VEFUSE_VOSEL_ADDR,
+		   MT6359_RG_VEFUSE_VOSEL_MASK << MT6359_RG_VEFUSE_VOSEL_SHIFT,
+		   240),
+	MT6359_LDO("ldo_vxo22", VXO22, vxo22_voltages,
+		   MT6359_RG_LDO_VXO22_EN_ADDR, MT6359_RG_LDO_VXO22_EN_SHIFT,
+		   MT6359_DA_VXO22_B_EN_ADDR, MT6359_RG_VXO22_VOSEL_ADDR,
+		   MT6359_RG_VXO22_VOSEL_MASK << MT6359_RG_VXO22_VOSEL_SHIFT,
+		   120),
+	MT6359_LDO("ldo_vrfck", VRFCK, vrfck_voltages,
+		   MT6359_RG_LDO_VRFCK_EN_ADDR, MT6359_RG_LDO_VRFCK_EN_SHIFT,
+		   MT6359_DA_VRFCK_B_EN_ADDR, MT6359_RG_VRFCK_VOSEL_ADDR,
+		   MT6359_RG_VRFCK_VOSEL_MASK << MT6359_RG_VRFCK_VOSEL_SHIFT,
+		   480),
+	MT6359_REG_FIXED("ldo_vbif28", VBIF28, MT6359_RG_LDO_VBIF28_EN_ADDR,
+			 MT6359_DA_VBIF28_B_EN_ADDR, 2800000),
+	MT6359_LDO("ldo_vio28", VIO28, vio28_voltages,
+		   MT6359_RG_LDO_VIO28_EN_ADDR, MT6359_RG_LDO_VIO28_EN_SHIFT,
+		   MT6359_DA_VIO28_B_EN_ADDR, MT6359_RG_VIO28_VOSEL_ADDR,
+		   MT6359_RG_VIO28_VOSEL_MASK << MT6359_RG_VIO28_VOSEL_SHIFT,
+		   240),
+	MT6359_LDO("ldo_vemc", VEMC, vemc_voltages,
+		   MT6359_RG_LDO_VEMC_EN_ADDR, MT6359_RG_LDO_VEMC_EN_SHIFT,
+		   MT6359_DA_VEMC_B_EN_ADDR, MT6359_RG_VEMC_VOSEL_ADDR,
+		   MT6359_RG_VEMC_VOSEL_MASK << MT6359_RG_VEMC_VOSEL_SHIFT,
+		   240),
+	MT6359_LDO("ldo_vcn33_2_bt", VCN33_2_BT, vcn33_voltages,
+		   MT6359_RG_LDO_VCN33_2_EN_0_ADDR,
+		   MT6359_RG_LDO_VCN33_2_EN_0_SHIFT,
+		   MT6359_DA_VCN33_2_B_EN_ADDR, MT6359_RG_VCN33_2_VOSEL_ADDR,
+		   MT6359_RG_VCN33_2_VOSEL_MASK <<
+		   MT6359_RG_VCN33_2_VOSEL_SHIFT, 240),
+	MT6359_LDO("ldo_vcn33_2_wifi", VCN33_2_WIFI, vcn33_voltages,
+		   MT6359_RG_LDO_VCN33_2_EN_1_ADDR,
+		   MT6359_RG_LDO_VCN33_2_EN_1_SHIFT,
+		   MT6359_DA_VCN33_2_B_EN_ADDR, MT6359_RG_VCN33_2_VOSEL_ADDR,
+		   MT6359_RG_VCN33_2_VOSEL_MASK <<
+		   MT6359_RG_VCN33_2_VOSEL_SHIFT, 240),
+	MT6359_LDO("ldo_va12", VA12, va12_voltages,
+		   MT6359_RG_LDO_VA12_EN_ADDR, MT6359_RG_LDO_VA12_EN_SHIFT,
+		   MT6359_DA_VA12_B_EN_ADDR, MT6359_RG_VA12_VOSEL_ADDR,
+		   MT6359_RG_VA12_VOSEL_MASK << MT6359_RG_VA12_VOSEL_SHIFT,
+		   240),
+	MT6359_LDO("ldo_va09", VA09, va09_voltages,
+		   MT6359_RG_LDO_VA09_EN_ADDR, MT6359_RG_LDO_VA09_EN_SHIFT,
+		   MT6359_DA_VA09_B_EN_ADDR, MT6359_RG_VA09_VOSEL_ADDR,
+		   MT6359_RG_VA09_VOSEL_MASK << MT6359_RG_VA09_VOSEL_SHIFT,
+		   240),
+	MT6359_LDO("ldo_vrf18", VRF18, vrf18_voltages,
+		   MT6359_RG_LDO_VRF18_EN_ADDR, MT6359_RG_LDO_VRF18_EN_SHIFT,
+		   MT6359_DA_VRF18_B_EN_ADDR, MT6359_RG_VRF18_VOSEL_ADDR,
+		   MT6359_RG_VRF18_VOSEL_MASK << MT6359_RG_VRF18_VOSEL_SHIFT,
+		   120),
+	MT6359_LDO_LINEAR("ldo_vsram_md", VSRAM_MD, 500000, 1100000, 6250,
+			  0, mt_volt_range7, MT6359_RG_LDO_VSRAM_MD_EN_ADDR,
+			  MT6359_DA_VSRAM_MD_B_EN_ADDR,
+			  MT6359_RG_LDO_VSRAM_MD_VOSEL_ADDR,
+			  MT6359_RG_LDO_VSRAM_MD_VOSEL_MASK <<
+			  MT6359_RG_LDO_VSRAM_MD_VOSEL_SHIFT),
+	MT6359_LDO("ldo_vufs", VUFS, volt18_voltages,
+		   MT6359_RG_LDO_VUFS_EN_ADDR, MT6359_RG_LDO_VUFS_EN_SHIFT,
+		   MT6359_DA_VUFS_B_EN_ADDR, MT6359_RG_VUFS_VOSEL_ADDR,
+		   MT6359_RG_VUFS_VOSEL_MASK << MT6359_RG_VUFS_VOSEL_SHIFT,
+		   1920),
+	MT6359_LDO("ldo_vm18", VM18, volt18_voltages,
+		   MT6359_RG_LDO_VM18_EN_ADDR, MT6359_RG_LDO_VM18_EN_SHIFT,
+		   MT6359_DA_VM18_B_EN_ADDR, MT6359_RG_VM18_VOSEL_ADDR,
+		   MT6359_RG_VM18_VOSEL_MASK << MT6359_RG_VM18_VOSEL_SHIFT,
+		   1920),
+	MT6359_LDO("ldo_vbbck", VBBCK, vbbck_voltages,
+		   MT6359_RG_LDO_VBBCK_EN_ADDR, MT6359_RG_LDO_VBBCK_EN_SHIFT,
+		   MT6359_DA_VBBCK_B_EN_ADDR, MT6359_RG_VBBCK_VOSEL_ADDR,
+		   MT6359_RG_VBBCK_VOSEL_MASK << MT6359_RG_VBBCK_VOSEL_SHIFT,
+		   240),
+	MT6359_LDO_LINEAR("ldo_vsram_proc1", VSRAM_PROC1, 500000, 1293750, 6250,
+			  0, mt_volt_range6, MT6359_RG_LDO_VSRAM_PROC1_EN_ADDR,
+			  MT6359_DA_VSRAM_PROC1_B_EN_ADDR,
+			  MT6359_RG_LDO_VSRAM_PROC1_VOSEL_ADDR,
+			  MT6359_RG_LDO_VSRAM_PROC1_VOSEL_MASK <<
+			  MT6359_RG_LDO_VSRAM_PROC1_VOSEL_SHIFT),
+	MT6359_LDO("ldo_vsim2", VSIM2, vsim2_voltages,
+		   MT6359_RG_LDO_VSIM2_EN_ADDR, MT6359_RG_LDO_VSIM2_EN_SHIFT,
+		   MT6359_DA_VSIM2_B_EN_ADDR, MT6359_RG_VSIM2_VOSEL_ADDR,
+		   MT6359_RG_VSIM2_VOSEL_MASK << MT6359_RG_VSIM2_VOSEL_SHIFT,
+		   480),
+	MT6359_LDO_LINEAR("ldo_vsram_others_sshub", VSRAM_OTHERS_SSHUB,
+			  500000, 1293750, 6250, 0, mt_volt_range6,
+			  MT6359_RG_LDO_VSRAM_OTHERS_SSHUB_EN_ADDR,
+			  MT6359_DA_VSRAM_OTHERS_B_EN_ADDR,
+			  MT6359_RG_LDO_VSRAM_OTHERS_SSHUB_VOSEL_ADDR,
+			  MT6359_RG_LDO_VSRAM_OTHERS_SSHUB_VOSEL_MASK <<
+			  MT6359_RG_LDO_VSRAM_OTHERS_SSHUB_VOSEL_SHIFT),
+};
+
+static int mt6359_regulator_probe(struct platform_device *pdev)
+{
+	struct mt6397_chip *mt6397 = dev_get_drvdata(pdev->dev.parent);
+	struct regulator_config config = {};
+	struct regulator_dev *rdev;
+	int i;
+
+	config.dev = mt6397->dev;
+	config.regmap = mt6397->regmap;
+	for (i = 0; i < MT6359_MAX_REGULATOR; i++) {
+		config.driver_data = &mt6359_regulators[i];
+		rdev = devm_regulator_register(&pdev->dev, &mt6359_regulators[i].desc, &config);
+		if (IS_ERR(rdev)) {
+			dev_err(&pdev->dev, "failed to register %s\n",
+				mt6359_regulators[i].desc.name);
+			return PTR_ERR(rdev);
+		}
+	}
+
+	return 0;
+}
+
+static const struct platform_device_id mt6359_platform_ids[] = {
+	{"mt6359-regulator", 0},
+	{ /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(platform, mt6359_platform_ids);
+
+static struct platform_driver mt6359_regulator_driver = {
+	.driver = {
+		.name = "mt6359-regulator",
+	},
+	.probe = mt6359_regulator_probe,
+	.id_table = mt6359_platform_ids,
+};
+
+module_platform_driver(mt6359_regulator_driver);
+
+MODULE_AUTHOR("Wen Su <wen.su@mediatek.com>");
+MODULE_DESCRIPTION("Regulator Driver for MediaTek MT6359 PMIC");
+MODULE_LICENSE("GPL");
diff --git a/include/linux/regulator/mt6359-regulator.h b/include/linux/regulator/mt6359-regulator.h
new file mode 100644
index 000000000000..14c4b715613e
--- /dev/null
+++ b/include/linux/regulator/mt6359-regulator.h
@@ -0,0 +1,58 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2021 MediaTek Inc.
+ */
+
+#ifndef __LINUX_REGULATOR_MT6359_H
+#define __LINUX_REGULATOR_MT6359_H
+
+enum {
+	MT6359_ID_VS1 = 0,
+	MT6359_ID_VGPU11,
+	MT6359_ID_VMODEM,
+	MT6359_ID_VPU,
+	MT6359_ID_VCORE,
+	MT6359_ID_VS2,
+	MT6359_ID_VPA,
+	MT6359_ID_VPROC2,
+	MT6359_ID_VPROC1,
+	MT6359_ID_VCORE_SSHUB,
+	MT6359_ID_VAUD18 = 10,
+	MT6359_ID_VSIM1,
+	MT6359_ID_VIBR,
+	MT6359_ID_VRF12,
+	MT6359_ID_VUSB,
+	MT6359_ID_VSRAM_PROC2,
+	MT6359_ID_VIO18,
+	MT6359_ID_VCAMIO,
+	MT6359_ID_VCN18,
+	MT6359_ID_VFE28,
+	MT6359_ID_VCN13,
+	MT6359_ID_VCN33_1_BT,
+	MT6359_ID_VCN33_1_WIFI,
+	MT6359_ID_VAUX18,
+	MT6359_ID_VSRAM_OTHERS,
+	MT6359_ID_VEFUSE,
+	MT6359_ID_VXO22,
+	MT6359_ID_VRFCK,
+	MT6359_ID_VBIF28,
+	MT6359_ID_VIO28,
+	MT6359_ID_VEMC,
+	MT6359_ID_VCN33_2_BT,
+	MT6359_ID_VCN33_2_WIFI,
+	MT6359_ID_VA12,
+	MT6359_ID_VA09,
+	MT6359_ID_VRF18,
+	MT6359_ID_VSRAM_MD,
+	MT6359_ID_VUFS,
+	MT6359_ID_VM18,
+	MT6359_ID_VBBCK,
+	MT6359_ID_VSRAM_PROC1,
+	MT6359_ID_VSIM2,
+	MT6359_ID_VSRAM_OTHERS_SSHUB,
+	MT6359_ID_RG_MAX,
+};
+
+#define MT6359_MAX_REGULATOR	MT6359_ID_RG_MAX
+
+#endif /* __LINUX_REGULATOR_MT6359_H */
-- 
cgit v1.2.3-59-g8ed1b


From 4cfc965475124c4eed2b7b5d8b6fc5048a21ecfd Mon Sep 17 00:00:00 2001
From: Hsin-Hsiung Wang <hsin-hsiung.wang@mediatek.com>
Date: Wed, 26 May 2021 14:52:06 +0800
Subject: regulator: mt6359: Add support for MT6359P regulator

The MT6359P is a eco version for MT6359 regulator.
We add support based on MT6359 regulator driver.

Signed-off-by: Hsin-Hsiung Wang <hsin-hsiung.wang@mediatek.com>
Acked-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
---
 drivers/regulator/mt6359-regulator.c       | 379 ++++++++++++++++++++++++++++-
 include/linux/mfd/mt6359p/registers.h      | 249 +++++++++++++++++++
 include/linux/regulator/mt6359-regulator.h |   1 +
 3 files changed, 623 insertions(+), 6 deletions(-)
 create mode 100644 include/linux/mfd/mt6359p/registers.h

(limited to 'drivers/regulator')

diff --git a/drivers/regulator/mt6359-regulator.c b/drivers/regulator/mt6359-regulator.c
index 994d3f67f73d..4f517c9fd6c4 100644
--- a/drivers/regulator/mt6359-regulator.c
+++ b/drivers/regulator/mt6359-regulator.c
@@ -4,6 +4,7 @@
 
 #include <linux/platform_device.h>
 #include <linux/mfd/mt6359/registers.h>
+#include <linux/mfd/mt6359p/registers.h>
 #include <linux/mfd/mt6397/core.h>
 #include <linux/module.h>
 #include <linux/of_device.h>
@@ -147,6 +148,29 @@ struct mt6359_regulator_info {
 	.qi = BIT(0),					\
 }
 
+#define MT6359P_LDO1(match, _name, _ops, _volt_table,	\
+	_enable_reg, _enable_mask, _status_reg,		\
+	_vsel_reg, _vsel_mask)				\
+[MT6359_ID_##_name] = {					\
+	.desc = {					\
+		.name = #_name,				\
+		.of_match = of_match_ptr(match),	\
+		.regulators_node = of_match_ptr("regulators"),	\
+		.ops = &_ops,				\
+		.type = REGULATOR_VOLTAGE,		\
+		.id = MT6359_ID_##_name,		\
+		.owner = THIS_MODULE,			\
+		.n_voltages = ARRAY_SIZE(_volt_table),	\
+		.volt_table = _volt_table,		\
+		.vsel_reg = _vsel_reg,			\
+		.vsel_mask = _vsel_mask,		\
+		.enable_reg = _enable_reg,		\
+		.enable_mask = BIT(_enable_mask),	\
+	},						\
+	.status_reg = _status_reg,			\
+	.qi = BIT(0),					\
+}
+
 static const struct linear_range mt_volt_range1[] = {
 	REGULATOR_LINEAR_RANGE(800000, 0, 0x70, 12500),
 };
@@ -175,6 +199,10 @@ static const struct linear_range mt_volt_range7[] = {
 	REGULATOR_LINEAR_RANGE(500000, 0, 0x7f, 6250),
 };
 
+static const struct linear_range mt_volt_range8[] = {
+	REGULATOR_LINEAR_RANGE(506250, 0, 0x7f, 6250),
+};
+
 static const u32 vsim1_voltages[] = {
 	0, 0, 0, 1700000, 1800000, 0, 0, 0, 2700000, 0, 0, 3000000, 3100000,
 };
@@ -212,6 +240,10 @@ static const u32 vrfck_voltages[] = {
 	0, 0, 1500000, 0, 0, 0, 0, 1600000, 0, 0, 0, 0, 1700000,
 };
 
+static const u32 vrfck_voltages_1[] = {
+	1240000, 1600000,
+};
+
 static const u32 vio28_voltages[] = {
 	0, 0, 0, 0, 0, 0, 0, 0, 0, 2800000, 2900000, 3000000, 3100000, 3300000,
 };
@@ -220,6 +252,11 @@ static const u32 vemc_voltages[] = {
 	0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 2900000, 3000000, 0, 3300000,
 };
 
+static const u32 vemc_voltages_1[] = {
+	0, 0, 0, 0, 0, 0, 0, 0, 2500000, 2800000, 2900000, 3000000, 3100000,
+	3300000,
+};
+
 static const u32 va12_voltages[] = {
 	0, 0, 0, 0, 0, 0, 1200000, 1300000,
 };
@@ -356,6 +393,78 @@ static int mt6359_regulator_set_mode(struct regulator_dev *rdev,
 	return ret;
 }
 
+static int mt6359p_vemc_set_voltage_sel(struct regulator_dev *rdev,
+					u32 sel)
+{
+	struct mt6359_regulator_info *info = rdev_get_drvdata(rdev);
+	int ret;
+	u32 val = 0;
+
+	sel <<= ffs(info->desc.vsel_mask) - 1;
+	ret = regmap_write(rdev->regmap, MT6359P_TMA_KEY_ADDR, TMA_KEY);
+	if (ret)
+		return ret;
+
+	ret = regmap_read(rdev->regmap, MT6359P_VM_MODE_ADDR, &val);
+	if (ret)
+		return ret;
+
+	switch (val) {
+	case 0:
+		/* If HW trapping is 0, use VEMC_VOSEL_0 */
+		ret = regmap_update_bits(rdev->regmap,
+					 info->desc.vsel_reg,
+					 info->desc.vsel_mask, sel);
+		break;
+	case 1:
+		/* If HW trapping is 1, use VEMC_VOSEL_1 */
+		ret = regmap_update_bits(rdev->regmap,
+					 info->desc.vsel_reg + 0x2,
+					 info->desc.vsel_mask, sel);
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	if (ret)
+		return ret;
+
+	ret = regmap_write(rdev->regmap, MT6359P_TMA_KEY_ADDR, 0);
+	return ret;
+}
+
+static int mt6359p_vemc_get_voltage_sel(struct regulator_dev *rdev)
+{
+	struct mt6359_regulator_info *info = rdev_get_drvdata(rdev);
+	int ret;
+	u32 val = 0;
+
+	ret = regmap_read(rdev->regmap, MT6359P_VM_MODE_ADDR, &val);
+	if (ret)
+		return ret;
+	switch (val) {
+	case 0:
+		/* If HW trapping is 0, use VEMC_VOSEL_0 */
+		ret = regmap_read(rdev->regmap,
+				  info->desc.vsel_reg, &val);
+		break;
+	case 1:
+		/* If HW trapping is 1, use VEMC_VOSEL_1 */
+		ret = regmap_read(rdev->regmap,
+				  info->desc.vsel_reg + 0x2, &val);
+		break;
+	default:
+		return -EINVAL;
+	}
+	if (ret)
+		return ret;
+
+	val &= info->desc.vsel_mask;
+	val >>= ffs(info->desc.vsel_mask) - 1;
+
+	return val;
+}
+
 static const struct regulator_ops mt6359_volt_range_ops = {
 	.list_voltage = regulator_list_voltage_linear_range,
 	.map_voltage = regulator_map_voltage_linear_range,
@@ -389,6 +498,18 @@ static const struct regulator_ops mt6359_volt_fixed_ops = {
 	.get_status = mt6359_get_status,
 };
 
+static const struct regulator_ops mt6359p_vemc_ops = {
+	.list_voltage = regulator_list_voltage_table,
+	.map_voltage = regulator_map_voltage_iterate,
+	.set_voltage_sel = mt6359p_vemc_set_voltage_sel,
+	.get_voltage_sel = mt6359p_vemc_get_voltage_sel,
+	.set_voltage_time_sel = regulator_set_voltage_time_sel,
+	.enable = regulator_enable_regmap,
+	.disable = regulator_disable_regmap,
+	.is_enabled = regulator_is_enabled_regmap,
+	.get_status = mt6359_get_status,
+};
+
 /* The array is indexed by id(MT6359_ID_XXX) */
 static struct mt6359_regulator_info mt6359_regulators[] = {
 	MT6359_BUCK("buck_vs1", VS1, 800000, 2200000, 12500, 0,
@@ -626,21 +747,267 @@ static struct mt6359_regulator_info mt6359_regulators[] = {
 			  MT6359_RG_LDO_VSRAM_OTHERS_SSHUB_VOSEL_SHIFT),
 };
 
+static struct mt6359_regulator_info mt6359p_regulators[] = {
+	MT6359_BUCK("buck_vs1", VS1, 800000, 2200000, 12500, 0,
+		    mt_volt_range1, MT6359_RG_BUCK_VS1_EN_ADDR,
+		    MT6359_DA_VS1_EN_ADDR, MT6359_RG_BUCK_VS1_VOSEL_ADDR,
+		    MT6359_RG_BUCK_VS1_VOSEL_MASK <<
+		    MT6359_RG_BUCK_VS1_VOSEL_SHIFT,
+		    MT6359_RG_BUCK_VS1_LP_ADDR, MT6359_RG_BUCK_VS1_LP_SHIFT,
+		    MT6359_RG_VS1_FPWM_ADDR, MT6359_RG_VS1_FPWM_SHIFT),
+	MT6359_BUCK("buck_vgpu11", VGPU11, 400000, 1193750, 6250, 0,
+		    mt_volt_range2, MT6359_RG_BUCK_VGPU11_EN_ADDR,
+		    MT6359_DA_VGPU11_EN_ADDR, MT6359P_RG_BUCK_VGPU11_VOSEL_ADDR,
+		    MT6359_RG_BUCK_VGPU11_VOSEL_MASK <<
+		    MT6359_RG_BUCK_VGPU11_VOSEL_SHIFT,
+		    MT6359_RG_BUCK_VGPU11_LP_ADDR,
+		    MT6359_RG_BUCK_VGPU11_LP_SHIFT,
+		    MT6359_RG_VGPU11_FCCM_ADDR, MT6359_RG_VGPU11_FCCM_SHIFT),
+	MT6359_BUCK("buck_vmodem", VMODEM, 400000, 1100000, 6250, 0,
+		    mt_volt_range3, MT6359_RG_BUCK_VMODEM_EN_ADDR,
+		    MT6359_DA_VMODEM_EN_ADDR, MT6359_RG_BUCK_VMODEM_VOSEL_ADDR,
+		    MT6359_RG_BUCK_VMODEM_VOSEL_MASK <<
+		    MT6359_RG_BUCK_VMODEM_VOSEL_SHIFT,
+		    MT6359_RG_BUCK_VMODEM_LP_ADDR,
+		    MT6359_RG_BUCK_VMODEM_LP_SHIFT,
+		    MT6359_RG_VMODEM_FCCM_ADDR, MT6359_RG_VMODEM_FCCM_SHIFT),
+	MT6359_BUCK("buck_vpu", VPU, 400000, 1193750, 6250, 0,
+		    mt_volt_range2, MT6359_RG_BUCK_VPU_EN_ADDR,
+		    MT6359_DA_VPU_EN_ADDR, MT6359_RG_BUCK_VPU_VOSEL_ADDR,
+		    MT6359_RG_BUCK_VPU_VOSEL_MASK <<
+		    MT6359_RG_BUCK_VPU_VOSEL_SHIFT,
+		    MT6359_RG_BUCK_VPU_LP_ADDR, MT6359_RG_BUCK_VPU_LP_SHIFT,
+		    MT6359_RG_VPU_FCCM_ADDR, MT6359_RG_VPU_FCCM_SHIFT),
+	MT6359_BUCK("buck_vcore", VCORE, 506250, 1300000, 6250, 0,
+		    mt_volt_range8, MT6359_RG_BUCK_VCORE_EN_ADDR,
+		    MT6359_DA_VCORE_EN_ADDR, MT6359P_RG_BUCK_VCORE_VOSEL_ADDR,
+		    MT6359_RG_BUCK_VCORE_VOSEL_MASK <<
+		    MT6359_RG_BUCK_VCORE_VOSEL_SHIFT,
+		    MT6359_RG_BUCK_VCORE_LP_ADDR, MT6359_RG_BUCK_VCORE_LP_SHIFT,
+		    MT6359_RG_VCORE_FCCM_ADDR, MT6359_RG_VCORE_FCCM_SHIFT),
+	MT6359_BUCK("buck_vs2", VS2, 800000, 1600000, 12500, 0,
+		    mt_volt_range4, MT6359_RG_BUCK_VS2_EN_ADDR,
+		    MT6359_DA_VS2_EN_ADDR, MT6359_RG_BUCK_VS2_VOSEL_ADDR,
+		    MT6359_RG_BUCK_VS2_VOSEL_MASK <<
+		    MT6359_RG_BUCK_VS2_VOSEL_SHIFT,
+		    MT6359_RG_BUCK_VS2_LP_ADDR, MT6359_RG_BUCK_VS2_LP_SHIFT,
+		    MT6359_RG_VS2_FPWM_ADDR, MT6359_RG_VS2_FPWM_SHIFT),
+	MT6359_BUCK("buck_vpa", VPA, 500000, 3650000, 50000, 0,
+		    mt_volt_range5, MT6359_RG_BUCK_VPA_EN_ADDR,
+		    MT6359_DA_VPA_EN_ADDR, MT6359_RG_BUCK_VPA_VOSEL_ADDR,
+		    MT6359_RG_BUCK_VPA_VOSEL_MASK <<
+		    MT6359_RG_BUCK_VPA_VOSEL_SHIFT,
+		    MT6359_RG_BUCK_VPA_LP_ADDR, MT6359_RG_BUCK_VPA_LP_SHIFT,
+		    MT6359_RG_VPA_MODESET_ADDR, MT6359_RG_VPA_MODESET_SHIFT),
+	MT6359_BUCK("buck_vproc2", VPROC2, 400000, 1193750, 6250, 0,
+		    mt_volt_range2, MT6359_RG_BUCK_VPROC2_EN_ADDR,
+		    MT6359_DA_VPROC2_EN_ADDR, MT6359_RG_BUCK_VPROC2_VOSEL_ADDR,
+		    MT6359_RG_BUCK_VPROC2_VOSEL_MASK <<
+		    MT6359_RG_BUCK_VPROC2_VOSEL_SHIFT,
+		    MT6359_RG_BUCK_VPROC2_LP_ADDR,
+		    MT6359_RG_BUCK_VPROC2_LP_SHIFT,
+		    MT6359_RG_VPROC2_FCCM_ADDR, MT6359_RG_VPROC2_FCCM_SHIFT),
+	MT6359_BUCK("buck_vproc1", VPROC1, 400000, 1193750, 6250, 0,
+		    mt_volt_range2, MT6359_RG_BUCK_VPROC1_EN_ADDR,
+		    MT6359_DA_VPROC1_EN_ADDR, MT6359_RG_BUCK_VPROC1_VOSEL_ADDR,
+		    MT6359_RG_BUCK_VPROC1_VOSEL_MASK <<
+		    MT6359_RG_BUCK_VPROC1_VOSEL_SHIFT,
+		    MT6359_RG_BUCK_VPROC1_LP_ADDR,
+		    MT6359_RG_BUCK_VPROC1_LP_SHIFT,
+		    MT6359_RG_VPROC1_FCCM_ADDR, MT6359_RG_VPROC1_FCCM_SHIFT),
+	MT6359_BUCK("buck_vgpu11_sshub", VGPU11_SSHUB, 400000, 1193750, 6250, 0,
+		    mt_volt_range2, MT6359P_RG_BUCK_VGPU11_SSHUB_EN_ADDR,
+		    MT6359_DA_VGPU11_EN_ADDR,
+		    MT6359P_RG_BUCK_VGPU11_SSHUB_VOSEL_ADDR,
+		    MT6359P_RG_BUCK_VGPU11_SSHUB_VOSEL_MASK <<
+		    MT6359P_RG_BUCK_VGPU11_SSHUB_VOSEL_SHIFT,
+		    MT6359_RG_BUCK_VGPU11_LP_ADDR,
+		    MT6359_RG_BUCK_VGPU11_LP_SHIFT,
+		    MT6359_RG_VGPU11_FCCM_ADDR, MT6359_RG_VGPU11_FCCM_SHIFT),
+	MT6359_REG_FIXED("ldo_vaud18", VAUD18, MT6359P_RG_LDO_VAUD18_EN_ADDR,
+			 MT6359P_DA_VAUD18_B_EN_ADDR, 1800000),
+	MT6359_LDO("ldo_vsim1", VSIM1, vsim1_voltages,
+		   MT6359P_RG_LDO_VSIM1_EN_ADDR, MT6359P_RG_LDO_VSIM1_EN_SHIFT,
+		   MT6359P_DA_VSIM1_B_EN_ADDR, MT6359P_RG_VSIM1_VOSEL_ADDR,
+		   MT6359_RG_VSIM1_VOSEL_MASK << MT6359_RG_VSIM1_VOSEL_SHIFT,
+		   480),
+	MT6359_LDO("ldo_vibr", VIBR, vibr_voltages,
+		   MT6359P_RG_LDO_VIBR_EN_ADDR, MT6359P_RG_LDO_VIBR_EN_SHIFT,
+		   MT6359P_DA_VIBR_B_EN_ADDR, MT6359P_RG_VIBR_VOSEL_ADDR,
+		   MT6359_RG_VIBR_VOSEL_MASK << MT6359_RG_VIBR_VOSEL_SHIFT,
+		   240),
+	MT6359_LDO("ldo_vrf12", VRF12, vrf12_voltages,
+		   MT6359P_RG_LDO_VRF12_EN_ADDR, MT6359P_RG_LDO_VRF12_EN_SHIFT,
+		   MT6359P_DA_VRF12_B_EN_ADDR, MT6359P_RG_VRF12_VOSEL_ADDR,
+		   MT6359_RG_VRF12_VOSEL_MASK << MT6359_RG_VRF12_VOSEL_SHIFT,
+		   480),
+	MT6359_REG_FIXED("ldo_vusb", VUSB, MT6359P_RG_LDO_VUSB_EN_0_ADDR,
+			 MT6359P_DA_VUSB_B_EN_ADDR, 3000000),
+	MT6359_LDO_LINEAR("ldo_vsram_proc2", VSRAM_PROC2, 500000, 1293750, 6250,
+			  0, mt_volt_range6, MT6359P_RG_LDO_VSRAM_PROC2_EN_ADDR,
+			  MT6359P_DA_VSRAM_PROC2_B_EN_ADDR,
+			  MT6359P_RG_LDO_VSRAM_PROC2_VOSEL_ADDR,
+			  MT6359_RG_LDO_VSRAM_PROC2_VOSEL_MASK <<
+			  MT6359_RG_LDO_VSRAM_PROC2_VOSEL_SHIFT),
+	MT6359_LDO("ldo_vio18", VIO18, volt18_voltages,
+		   MT6359P_RG_LDO_VIO18_EN_ADDR, MT6359P_RG_LDO_VIO18_EN_SHIFT,
+		   MT6359P_DA_VIO18_B_EN_ADDR, MT6359P_RG_VIO18_VOSEL_ADDR,
+		   MT6359_RG_VIO18_VOSEL_MASK << MT6359_RG_VIO18_VOSEL_SHIFT,
+		   960),
+	MT6359_LDO("ldo_vcamio", VCAMIO, volt18_voltages,
+		   MT6359P_RG_LDO_VCAMIO_EN_ADDR,
+		   MT6359P_RG_LDO_VCAMIO_EN_SHIFT,
+		   MT6359P_DA_VCAMIO_B_EN_ADDR, MT6359P_RG_VCAMIO_VOSEL_ADDR,
+		   MT6359_RG_VCAMIO_VOSEL_MASK << MT6359_RG_VCAMIO_VOSEL_SHIFT,
+		   1290),
+	MT6359_REG_FIXED("ldo_vcn18", VCN18, MT6359P_RG_LDO_VCN18_EN_ADDR,
+			 MT6359P_DA_VCN18_B_EN_ADDR, 1800000),
+	MT6359_REG_FIXED("ldo_vfe28", VFE28, MT6359P_RG_LDO_VFE28_EN_ADDR,
+			 MT6359P_DA_VFE28_B_EN_ADDR, 2800000),
+	MT6359_LDO("ldo_vcn13", VCN13, vcn13_voltages,
+		   MT6359P_RG_LDO_VCN13_EN_ADDR, MT6359P_RG_LDO_VCN13_EN_SHIFT,
+		   MT6359P_DA_VCN13_B_EN_ADDR, MT6359P_RG_VCN13_VOSEL_ADDR,
+		   MT6359_RG_VCN13_VOSEL_MASK << MT6359_RG_VCN13_VOSEL_SHIFT,
+		   240),
+	MT6359_LDO("ldo_vcn33_1_bt", VCN33_1_BT, vcn33_voltages,
+		   MT6359P_RG_LDO_VCN33_1_EN_0_ADDR,
+		   MT6359_RG_LDO_VCN33_1_EN_0_SHIFT,
+		   MT6359P_DA_VCN33_1_B_EN_ADDR, MT6359P_RG_VCN33_1_VOSEL_ADDR,
+		   MT6359_RG_VCN33_1_VOSEL_MASK <<
+		   MT6359_RG_VCN33_1_VOSEL_SHIFT, 240),
+	MT6359_LDO("ldo_vcn33_1_wifi", VCN33_1_WIFI, vcn33_voltages,
+		   MT6359P_RG_LDO_VCN33_1_EN_1_ADDR,
+		   MT6359P_RG_LDO_VCN33_1_EN_1_SHIFT,
+		   MT6359P_DA_VCN33_1_B_EN_ADDR, MT6359P_RG_VCN33_1_VOSEL_ADDR,
+		   MT6359_RG_VCN33_1_VOSEL_MASK <<
+		   MT6359_RG_VCN33_1_VOSEL_SHIFT, 240),
+	MT6359_REG_FIXED("ldo_vaux18", VAUX18, MT6359P_RG_LDO_VAUX18_EN_ADDR,
+			 MT6359P_DA_VAUX18_B_EN_ADDR, 1800000),
+	MT6359_LDO_LINEAR("ldo_vsram_others", VSRAM_OTHERS, 500000, 1293750,
+			  6250, 0, mt_volt_range6,
+			  MT6359P_RG_LDO_VSRAM_OTHERS_EN_ADDR,
+			  MT6359P_DA_VSRAM_OTHERS_B_EN_ADDR,
+			  MT6359P_RG_LDO_VSRAM_OTHERS_VOSEL_ADDR,
+			  MT6359_RG_LDO_VSRAM_OTHERS_VOSEL_MASK <<
+			  MT6359_RG_LDO_VSRAM_OTHERS_VOSEL_SHIFT),
+	MT6359_LDO("ldo_vefuse", VEFUSE, vefuse_voltages,
+		   MT6359P_RG_LDO_VEFUSE_EN_ADDR,
+		   MT6359P_RG_LDO_VEFUSE_EN_SHIFT,
+		   MT6359P_DA_VEFUSE_B_EN_ADDR, MT6359P_RG_VEFUSE_VOSEL_ADDR,
+		   MT6359_RG_VEFUSE_VOSEL_MASK << MT6359_RG_VEFUSE_VOSEL_SHIFT,
+		   240),
+	MT6359_LDO("ldo_vxo22", VXO22, vxo22_voltages,
+		   MT6359P_RG_LDO_VXO22_EN_ADDR, MT6359P_RG_LDO_VXO22_EN_SHIFT,
+		   MT6359P_DA_VXO22_B_EN_ADDR, MT6359P_RG_VXO22_VOSEL_ADDR,
+		   MT6359_RG_VXO22_VOSEL_MASK << MT6359_RG_VXO22_VOSEL_SHIFT,
+		   480),
+	MT6359_LDO("ldo_vrfck_1", VRFCK, vrfck_voltages_1,
+		   MT6359P_RG_LDO_VRFCK_EN_ADDR, MT6359P_RG_LDO_VRFCK_EN_SHIFT,
+		   MT6359P_DA_VRFCK_B_EN_ADDR, MT6359P_RG_VRFCK_VOSEL_ADDR,
+		   MT6359_RG_VRFCK_VOSEL_MASK << MT6359_RG_VRFCK_VOSEL_SHIFT,
+		   480),
+	MT6359_REG_FIXED("ldo_vbif28", VBIF28, MT6359P_RG_LDO_VBIF28_EN_ADDR,
+			 MT6359P_DA_VBIF28_B_EN_ADDR, 2800000),
+	MT6359_LDO("ldo_vio28", VIO28, vio28_voltages,
+		   MT6359P_RG_LDO_VIO28_EN_ADDR, MT6359P_RG_LDO_VIO28_EN_SHIFT,
+		   MT6359P_DA_VIO28_B_EN_ADDR, MT6359P_RG_VIO28_VOSEL_ADDR,
+		   MT6359_RG_VIO28_VOSEL_MASK << MT6359_RG_VIO28_VOSEL_SHIFT,
+		   1920),
+	MT6359P_LDO1("ldo_vemc_1", VEMC, mt6359p_vemc_ops, vemc_voltages_1,
+		     MT6359P_RG_LDO_VEMC_EN_ADDR, MT6359P_RG_LDO_VEMC_EN_SHIFT,
+		     MT6359P_DA_VEMC_B_EN_ADDR,
+		     MT6359P_RG_LDO_VEMC_VOSEL_0_ADDR,
+		     MT6359P_RG_LDO_VEMC_VOSEL_0_MASK <<
+		     MT6359P_RG_LDO_VEMC_VOSEL_0_SHIFT),
+	MT6359_LDO("ldo_vcn33_2_bt", VCN33_2_BT, vcn33_voltages,
+		   MT6359P_RG_LDO_VCN33_2_EN_0_ADDR,
+		   MT6359P_RG_LDO_VCN33_2_EN_0_SHIFT,
+		   MT6359P_DA_VCN33_2_B_EN_ADDR, MT6359P_RG_VCN33_2_VOSEL_ADDR,
+		   MT6359_RG_VCN33_2_VOSEL_MASK <<
+		   MT6359_RG_VCN33_2_VOSEL_SHIFT, 240),
+	MT6359_LDO("ldo_vcn33_2_wifi", VCN33_2_WIFI, vcn33_voltages,
+		   MT6359P_RG_LDO_VCN33_2_EN_1_ADDR,
+		   MT6359_RG_LDO_VCN33_2_EN_1_SHIFT,
+		   MT6359P_DA_VCN33_2_B_EN_ADDR, MT6359P_RG_VCN33_2_VOSEL_ADDR,
+		   MT6359_RG_VCN33_2_VOSEL_MASK <<
+		   MT6359_RG_VCN33_2_VOSEL_SHIFT, 240),
+	MT6359_LDO("ldo_va12", VA12, va12_voltages,
+		   MT6359P_RG_LDO_VA12_EN_ADDR, MT6359P_RG_LDO_VA12_EN_SHIFT,
+		   MT6359P_DA_VA12_B_EN_ADDR, MT6359P_RG_VA12_VOSEL_ADDR,
+		   MT6359_RG_VA12_VOSEL_MASK << MT6359_RG_VA12_VOSEL_SHIFT,
+		   960),
+	MT6359_LDO("ldo_va09", VA09, va09_voltages,
+		   MT6359P_RG_LDO_VA09_EN_ADDR, MT6359P_RG_LDO_VA09_EN_SHIFT,
+		   MT6359P_DA_VA09_B_EN_ADDR, MT6359P_RG_VA09_VOSEL_ADDR,
+		   MT6359_RG_VA09_VOSEL_MASK << MT6359_RG_VA09_VOSEL_SHIFT,
+		   960),
+	MT6359_LDO("ldo_vrf18", VRF18, vrf18_voltages,
+		   MT6359P_RG_LDO_VRF18_EN_ADDR, MT6359P_RG_LDO_VRF18_EN_SHIFT,
+		   MT6359P_DA_VRF18_B_EN_ADDR, MT6359P_RG_VRF18_VOSEL_ADDR,
+		   MT6359_RG_VRF18_VOSEL_MASK << MT6359_RG_VRF18_VOSEL_SHIFT,
+		   240),
+	MT6359_LDO_LINEAR("ldo_vsram_md", VSRAM_MD, 500000, 1293750, 6250,
+			  0, mt_volt_range7, MT6359P_RG_LDO_VSRAM_MD_EN_ADDR,
+			  MT6359P_DA_VSRAM_MD_B_EN_ADDR,
+			  MT6359P_RG_LDO_VSRAM_MD_VOSEL_ADDR,
+			  MT6359_RG_LDO_VSRAM_MD_VOSEL_MASK <<
+			  MT6359_RG_LDO_VSRAM_MD_VOSEL_SHIFT),
+	MT6359_LDO("ldo_vufs", VUFS, volt18_voltages,
+		   MT6359P_RG_LDO_VUFS_EN_ADDR, MT6359P_RG_LDO_VUFS_EN_SHIFT,
+		   MT6359P_DA_VUFS_B_EN_ADDR, MT6359P_RG_VUFS_VOSEL_ADDR,
+		   MT6359_RG_VUFS_VOSEL_MASK << MT6359_RG_VUFS_VOSEL_SHIFT,
+		   1920),
+	MT6359_LDO("ldo_vm18", VM18, volt18_voltages,
+		   MT6359P_RG_LDO_VM18_EN_ADDR, MT6359P_RG_LDO_VM18_EN_SHIFT,
+		   MT6359P_DA_VM18_B_EN_ADDR, MT6359P_RG_VM18_VOSEL_ADDR,
+		   MT6359_RG_VM18_VOSEL_MASK << MT6359_RG_VM18_VOSEL_SHIFT,
+		   1920),
+	MT6359_LDO("ldo_vbbck", VBBCK, vbbck_voltages,
+		   MT6359P_RG_LDO_VBBCK_EN_ADDR, MT6359P_RG_LDO_VBBCK_EN_SHIFT,
+		   MT6359P_DA_VBBCK_B_EN_ADDR, MT6359P_RG_VBBCK_VOSEL_ADDR,
+		   MT6359P_RG_VBBCK_VOSEL_MASK << MT6359P_RG_VBBCK_VOSEL_SHIFT,
+		   480),
+	MT6359_LDO_LINEAR("ldo_vsram_proc1", VSRAM_PROC1, 500000, 1293750, 6250,
+			  0, mt_volt_range6, MT6359P_RG_LDO_VSRAM_PROC1_EN_ADDR,
+			  MT6359P_DA_VSRAM_PROC1_B_EN_ADDR,
+			  MT6359P_RG_LDO_VSRAM_PROC1_VOSEL_ADDR,
+			  MT6359_RG_LDO_VSRAM_PROC1_VOSEL_MASK <<
+			  MT6359_RG_LDO_VSRAM_PROC1_VOSEL_SHIFT),
+	MT6359_LDO("ldo_vsim2", VSIM2, vsim2_voltages,
+		   MT6359P_RG_LDO_VSIM2_EN_ADDR, MT6359P_RG_LDO_VSIM2_EN_SHIFT,
+		   MT6359P_DA_VSIM2_B_EN_ADDR, MT6359P_RG_VSIM2_VOSEL_ADDR,
+		   MT6359_RG_VSIM2_VOSEL_MASK << MT6359_RG_VSIM2_VOSEL_SHIFT,
+		   480),
+	MT6359_LDO_LINEAR("ldo_vsram_others_sshub", VSRAM_OTHERS_SSHUB,
+			  500000, 1293750, 6250, 0, mt_volt_range6,
+			  MT6359P_RG_LDO_VSRAM_OTHERS_SSHUB_EN_ADDR,
+			  MT6359P_DA_VSRAM_OTHERS_B_EN_ADDR,
+			  MT6359P_RG_LDO_VSRAM_OTHERS_SSHUB_VOSEL_ADDR,
+			  MT6359_RG_LDO_VSRAM_OTHERS_SSHUB_VOSEL_MASK <<
+			  MT6359_RG_LDO_VSRAM_OTHERS_SSHUB_VOSEL_SHIFT),
+};
+
 static int mt6359_regulator_probe(struct platform_device *pdev)
 {
 	struct mt6397_chip *mt6397 = dev_get_drvdata(pdev->dev.parent);
 	struct regulator_config config = {};
 	struct regulator_dev *rdev;
-	int i;
+	struct mt6359_regulator_info *mt6359_info;
+	int i, hw_ver;
+
+	regmap_read(mt6397->regmap, MT6359P_HWCID, &hw_ver);
+	if (hw_ver >= MT6359P_CHIP_VER)
+		mt6359_info = mt6359p_regulators;
+	else
+		mt6359_info = mt6359_regulators;
 
 	config.dev = mt6397->dev;
 	config.regmap = mt6397->regmap;
-	for (i = 0; i < MT6359_MAX_REGULATOR; i++) {
-		config.driver_data = &mt6359_regulators[i];
-		rdev = devm_regulator_register(&pdev->dev, &mt6359_regulators[i].desc, &config);
+	for (i = 0; i < MT6359_MAX_REGULATOR; i++, mt6359_info++) {
+		config.driver_data = mt6359_info;
+		rdev = devm_regulator_register(&pdev->dev, &mt6359_info->desc, &config);
 		if (IS_ERR(rdev)) {
-			dev_err(&pdev->dev, "failed to register %s\n",
-				mt6359_regulators[i].desc.name);
+			dev_err(&pdev->dev, "failed to register %s\n", mt6359_info->desc.name);
 			return PTR_ERR(rdev);
 		}
 	}
diff --git a/include/linux/mfd/mt6359p/registers.h b/include/linux/mfd/mt6359p/registers.h
new file mode 100644
index 000000000000..3d97c1885171
--- /dev/null
+++ b/include/linux/mfd/mt6359p/registers.h
@@ -0,0 +1,249 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2021 MediaTek Inc.
+ */
+
+#ifndef __MFD_MT6359P_REGISTERS_H__
+#define __MFD_MT6359P_REGISTERS_H__
+
+#define MT6359P_CHIP_VER 0x5930
+
+/* PMIC Registers */
+#define MT6359P_HWCID                         0x8
+#define MT6359P_TOP_TRAP                      0x50
+#define MT6359P_TOP_TMA_KEY                   0x3a8
+#define MT6359P_BUCK_VCORE_ELR_NUM            0x152a
+#define MT6359P_BUCK_VCORE_ELR0               0x152c
+#define MT6359P_BUCK_VGPU11_SSHUB_CON0        0x15aa
+#define MT6359P_BUCK_VGPU11_ELR0              0x15b4
+#define MT6359P_LDO_VSRAM_PROC1_ELR           0x1b44
+#define MT6359P_LDO_VSRAM_PROC2_ELR           0x1b46
+#define MT6359P_LDO_VSRAM_OTHERS_ELR          0x1b48
+#define MT6359P_LDO_VSRAM_MD_ELR              0x1b4a
+#define MT6359P_LDO_VEMC_ELR_0                0x1b4c
+#define MT6359P_LDO_VFE28_CON0                0x1b88
+#define MT6359P_LDO_VFE28_MON                 0x1b8c
+#define MT6359P_LDO_VXO22_CON0                0x1b9a
+#define MT6359P_LDO_VXO22_MON                 0x1b9e
+#define MT6359P_LDO_VRF18_CON0                0x1bac
+#define MT6359P_LDO_VRF18_MON                 0x1bb0
+#define MT6359P_LDO_VRF12_CON0                0x1bbe
+#define MT6359P_LDO_VRF12_MON                 0x1bc2
+#define MT6359P_LDO_VEFUSE_CON0               0x1bd0
+#define MT6359P_LDO_VEFUSE_MON                0x1bd4
+#define MT6359P_LDO_VCN33_1_CON0              0x1be2
+#define MT6359P_LDO_VCN33_1_MON               0x1be6
+#define MT6359P_LDO_VCN33_1_MULTI_SW          0x1bf4
+#define MT6359P_LDO_VCN33_2_CON0              0x1c08
+#define MT6359P_LDO_VCN33_2_MON               0x1c0c
+#define MT6359P_LDO_VCN33_2_MULTI_SW          0x1c1a
+#define MT6359P_LDO_VCN13_CON0                0x1c1c
+#define MT6359P_LDO_VCN13_MON                 0x1c20
+#define MT6359P_LDO_VCN18_CON0                0x1c2e
+#define MT6359P_LDO_VCN18_MON                 0x1c32
+#define MT6359P_LDO_VA09_CON0                 0x1c40
+#define MT6359P_LDO_VA09_MON                  0x1c44
+#define MT6359P_LDO_VCAMIO_CON0               0x1c52
+#define MT6359P_LDO_VCAMIO_MON                0x1c56
+#define MT6359P_LDO_VA12_CON0                 0x1c64
+#define MT6359P_LDO_VA12_MON                  0x1c68
+#define MT6359P_LDO_VAUX18_CON0               0x1c88
+#define MT6359P_LDO_VAUX18_MON                0x1c8c
+#define MT6359P_LDO_VAUD18_CON0               0x1c9a
+#define MT6359P_LDO_VAUD18_MON                0x1c9e
+#define MT6359P_LDO_VIO18_CON0                0x1cac
+#define MT6359P_LDO_VIO18_MON                 0x1cb0
+#define MT6359P_LDO_VEMC_CON0                 0x1cbe
+#define MT6359P_LDO_VEMC_MON                  0x1cc2
+#define MT6359P_LDO_VSIM1_CON0                0x1cd0
+#define MT6359P_LDO_VSIM1_MON                 0x1cd4
+#define MT6359P_LDO_VSIM2_CON0                0x1ce2
+#define MT6359P_LDO_VSIM2_MON                 0x1ce6
+#define MT6359P_LDO_VUSB_CON0                 0x1d08
+#define MT6359P_LDO_VUSB_MON                  0x1d0c
+#define MT6359P_LDO_VUSB_MULTI_SW             0x1d1a
+#define MT6359P_LDO_VRFCK_CON0                0x1d1c
+#define MT6359P_LDO_VRFCK_MON                 0x1d20
+#define MT6359P_LDO_VBBCK_CON0                0x1d2e
+#define MT6359P_LDO_VBBCK_MON                 0x1d32
+#define MT6359P_LDO_VBIF28_CON0               0x1d40
+#define MT6359P_LDO_VBIF28_MON                0x1d44
+#define MT6359P_LDO_VIBR_CON0                 0x1d52
+#define MT6359P_LDO_VIBR_MON                  0x1d56
+#define MT6359P_LDO_VIO28_CON0                0x1d64
+#define MT6359P_LDO_VIO28_MON                 0x1d68
+#define MT6359P_LDO_VM18_CON0                 0x1d88
+#define MT6359P_LDO_VM18_MON                  0x1d8c
+#define MT6359P_LDO_VUFS_CON0                 0x1d9a
+#define MT6359P_LDO_VUFS_MON                  0x1d9e
+#define MT6359P_LDO_VSRAM_PROC1_CON0          0x1e88
+#define MT6359P_LDO_VSRAM_PROC1_MON           0x1e8c
+#define MT6359P_LDO_VSRAM_PROC1_VOSEL1        0x1e90
+#define MT6359P_LDO_VSRAM_PROC2_CON0          0x1ea8
+#define MT6359P_LDO_VSRAM_PROC2_MON           0x1eac
+#define MT6359P_LDO_VSRAM_PROC2_VOSEL1        0x1eb0
+#define MT6359P_LDO_VSRAM_OTHERS_CON0         0x1f08
+#define MT6359P_LDO_VSRAM_OTHERS_MON          0x1f0c
+#define MT6359P_LDO_VSRAM_OTHERS_VOSEL1       0x1f10
+#define MT6359P_LDO_VSRAM_OTHERS_SSHUB        0x1f28
+#define MT6359P_LDO_VSRAM_MD_CON0             0x1f2e
+#define MT6359P_LDO_VSRAM_MD_MON              0x1f32
+#define MT6359P_LDO_VSRAM_MD_VOSEL1           0x1f36
+#define MT6359P_VFE28_ANA_CON0                0x1f88
+#define MT6359P_VAUX18_ANA_CON0               0x1f8c
+#define MT6359P_VUSB_ANA_CON0                 0x1f90
+#define MT6359P_VBIF28_ANA_CON0               0x1f94
+#define MT6359P_VCN33_1_ANA_CON0              0x1f98
+#define MT6359P_VCN33_2_ANA_CON0              0x1f9c
+#define MT6359P_VEMC_ANA_CON0                 0x1fa0
+#define MT6359P_VSIM1_ANA_CON0                0x1fa2
+#define MT6359P_VSIM2_ANA_CON0                0x1fa6
+#define MT6359P_VIO28_ANA_CON0                0x1faa
+#define MT6359P_VIBR_ANA_CON0                 0x1fae
+#define MT6359P_VFE28_ELR_4                   0x1fc0
+#define MT6359P_VRF18_ANA_CON0                0x2008
+#define MT6359P_VEFUSE_ANA_CON0               0x200c
+#define MT6359P_VCN18_ANA_CON0                0x2010
+#define MT6359P_VCAMIO_ANA_CON0               0x2014
+#define MT6359P_VAUD18_ANA_CON0               0x2018
+#define MT6359P_VIO18_ANA_CON0                0x201c
+#define MT6359P_VM18_ANA_CON0                 0x2020
+#define MT6359P_VUFS_ANA_CON0                 0x2024
+#define MT6359P_VRF12_ANA_CON0                0x202a
+#define MT6359P_VCN13_ANA_CON0                0x202e
+#define MT6359P_VA09_ANA_CON0                 0x2032
+#define MT6359P_VRF18_ELR_3                   0x204e
+#define MT6359P_VXO22_ANA_CON0                0x2088
+#define MT6359P_VRFCK_ANA_CON0                0x208c
+#define MT6359P_VBBCK_ANA_CON0                0x2096
+
+#define MT6359P_RG_BUCK_VCORE_VOSEL_ADDR         MT6359P_BUCK_VCORE_ELR0
+#define MT6359P_RG_BUCK_VGPU11_SSHUB_EN_ADDR     MT6359P_BUCK_VGPU11_SSHUB_CON0
+#define MT6359P_RG_BUCK_VGPU11_VOSEL_ADDR        MT6359P_BUCK_VGPU11_ELR0
+#define MT6359P_RG_BUCK_VGPU11_SSHUB_VOSEL_ADDR  MT6359P_BUCK_VGPU11_SSHUB_CON0
+#define MT6359P_RG_BUCK_VGPU11_SSHUB_VOSEL_MASK  0x7F
+#define MT6359P_RG_BUCK_VGPU11_SSHUB_VOSEL_SHIFT 4
+#define MT6359P_RG_LDO_VSRAM_PROC1_VOSEL_ADDR    MT6359P_LDO_VSRAM_PROC1_ELR
+#define MT6359P_RG_LDO_VSRAM_PROC2_VOSEL_ADDR    MT6359P_LDO_VSRAM_PROC2_ELR
+#define MT6359P_RG_LDO_VSRAM_OTHERS_VOSEL_ADDR   MT6359P_LDO_VSRAM_OTHERS_ELR
+#define MT6359P_RG_LDO_VSRAM_MD_VOSEL_ADDR       MT6359P_LDO_VSRAM_MD_ELR
+#define MT6359P_RG_LDO_VEMC_VOSEL_0_ADDR         MT6359P_LDO_VEMC_ELR_0
+#define MT6359P_RG_LDO_VEMC_VOSEL_0_MASK         0xF
+#define MT6359P_RG_LDO_VEMC_VOSEL_0_SHIFT        0
+#define MT6359P_RG_LDO_VFE28_EN_ADDR             MT6359P_LDO_VFE28_CON0
+#define MT6359P_DA_VFE28_B_EN_ADDR               MT6359P_LDO_VFE28_MON
+#define MT6359P_RG_LDO_VXO22_EN_ADDR             MT6359P_LDO_VXO22_CON0
+#define MT6359P_RG_LDO_VXO22_EN_SHIFT            0
+#define MT6359P_DA_VXO22_B_EN_ADDR               MT6359P_LDO_VXO22_MON
+#define MT6359P_RG_LDO_VRF18_EN_ADDR             MT6359P_LDO_VRF18_CON0
+#define MT6359P_RG_LDO_VRF18_EN_SHIFT            0
+#define MT6359P_DA_VRF18_B_EN_ADDR               MT6359P_LDO_VRF18_MON
+#define MT6359P_RG_LDO_VRF12_EN_ADDR             MT6359P_LDO_VRF12_CON0
+#define MT6359P_RG_LDO_VRF12_EN_SHIFT            0
+#define MT6359P_DA_VRF12_B_EN_ADDR               MT6359P_LDO_VRF12_MON
+#define MT6359P_RG_LDO_VEFUSE_EN_ADDR            MT6359P_LDO_VEFUSE_CON0
+#define MT6359P_RG_LDO_VEFUSE_EN_SHIFT           0
+#define MT6359P_DA_VEFUSE_B_EN_ADDR              MT6359P_LDO_VEFUSE_MON
+#define MT6359P_RG_LDO_VCN33_1_EN_0_ADDR         MT6359P_LDO_VCN33_1_CON0
+#define MT6359P_DA_VCN33_1_B_EN_ADDR             MT6359P_LDO_VCN33_1_MON
+#define MT6359P_RG_LDO_VCN33_1_EN_1_ADDR         MT6359P_LDO_VCN33_1_MULTI_SW
+#define MT6359P_RG_LDO_VCN33_1_EN_1_SHIFT        15
+#define MT6359P_RG_LDO_VCN33_2_EN_0_ADDR         MT6359P_LDO_VCN33_2_CON0
+#define MT6359P_RG_LDO_VCN33_2_EN_0_SHIFT        0
+#define MT6359P_DA_VCN33_2_B_EN_ADDR             MT6359P_LDO_VCN33_2_MON
+#define MT6359P_RG_LDO_VCN33_2_EN_1_ADDR         MT6359P_LDO_VCN33_2_MULTI_SW
+#define MT6359P_RG_LDO_VCN13_EN_ADDR             MT6359P_LDO_VCN13_CON0
+#define MT6359P_RG_LDO_VCN13_EN_SHIFT            0
+#define MT6359P_DA_VCN13_B_EN_ADDR               MT6359P_LDO_VCN13_MON
+#define MT6359P_RG_LDO_VCN18_EN_ADDR             MT6359P_LDO_VCN18_CON0
+#define MT6359P_DA_VCN18_B_EN_ADDR               MT6359P_LDO_VCN18_MON
+#define MT6359P_RG_LDO_VA09_EN_ADDR              MT6359P_LDO_VA09_CON0
+#define MT6359P_RG_LDO_VA09_EN_SHIFT             0
+#define MT6359P_DA_VA09_B_EN_ADDR                MT6359P_LDO_VA09_MON
+#define MT6359P_RG_LDO_VCAMIO_EN_ADDR            MT6359P_LDO_VCAMIO_CON0
+#define MT6359P_RG_LDO_VCAMIO_EN_SHIFT           0
+#define MT6359P_DA_VCAMIO_B_EN_ADDR              MT6359P_LDO_VCAMIO_MON
+#define MT6359P_RG_LDO_VA12_EN_ADDR              MT6359P_LDO_VA12_CON0
+#define MT6359P_RG_LDO_VA12_EN_SHIFT             0
+#define MT6359P_DA_VA12_B_EN_ADDR                MT6359P_LDO_VA12_MON
+#define MT6359P_RG_LDO_VAUX18_EN_ADDR            MT6359P_LDO_VAUX18_CON0
+#define MT6359P_DA_VAUX18_B_EN_ADDR              MT6359P_LDO_VAUX18_MON
+#define MT6359P_RG_LDO_VAUD18_EN_ADDR            MT6359P_LDO_VAUD18_CON0
+#define MT6359P_DA_VAUD18_B_EN_ADDR              MT6359P_LDO_VAUD18_MON
+#define MT6359P_RG_LDO_VIO18_EN_ADDR             MT6359P_LDO_VIO18_CON0
+#define MT6359P_RG_LDO_VIO18_EN_SHIFT            0
+#define MT6359P_DA_VIO18_B_EN_ADDR               MT6359P_LDO_VIO18_MON
+#define MT6359P_RG_LDO_VEMC_EN_ADDR              MT6359P_LDO_VEMC_CON0
+#define MT6359P_RG_LDO_VEMC_EN_SHIFT             0
+#define MT6359P_DA_VEMC_B_EN_ADDR                MT6359P_LDO_VEMC_MON
+#define MT6359P_RG_LDO_VSIM1_EN_ADDR             MT6359P_LDO_VSIM1_CON0
+#define MT6359P_RG_LDO_VSIM1_EN_SHIFT            0
+#define MT6359P_DA_VSIM1_B_EN_ADDR               MT6359P_LDO_VSIM1_MON
+#define MT6359P_RG_LDO_VSIM2_EN_ADDR             MT6359P_LDO_VSIM2_CON0
+#define MT6359P_RG_LDO_VSIM2_EN_SHIFT            0
+#define MT6359P_DA_VSIM2_B_EN_ADDR               MT6359P_LDO_VSIM2_MON
+#define MT6359P_RG_LDO_VUSB_EN_0_ADDR            MT6359P_LDO_VUSB_CON0
+#define MT6359P_DA_VUSB_B_EN_ADDR                MT6359P_LDO_VUSB_MON
+#define MT6359P_RG_LDO_VUSB_EN_1_ADDR            MT6359P_LDO_VUSB_MULTI_SW
+#define MT6359P_RG_LDO_VRFCK_EN_ADDR             MT6359P_LDO_VRFCK_CON0
+#define MT6359P_RG_LDO_VRFCK_EN_SHIFT            0
+#define MT6359P_DA_VRFCK_B_EN_ADDR               MT6359P_LDO_VRFCK_MON
+#define MT6359P_RG_LDO_VBBCK_EN_ADDR             MT6359P_LDO_VBBCK_CON0
+#define MT6359P_RG_LDO_VBBCK_EN_SHIFT            0
+#define MT6359P_DA_VBBCK_B_EN_ADDR               MT6359P_LDO_VBBCK_MON
+#define MT6359P_RG_LDO_VBIF28_EN_ADDR            MT6359P_LDO_VBIF28_CON0
+#define MT6359P_DA_VBIF28_B_EN_ADDR              MT6359P_LDO_VBIF28_MON
+#define MT6359P_RG_LDO_VIBR_EN_ADDR              MT6359P_LDO_VIBR_CON0
+#define MT6359P_RG_LDO_VIBR_EN_SHIFT             0
+#define MT6359P_DA_VIBR_B_EN_ADDR                MT6359P_LDO_VIBR_MON
+#define MT6359P_RG_LDO_VIO28_EN_ADDR             MT6359P_LDO_VIO28_CON0
+#define MT6359P_RG_LDO_VIO28_EN_SHIFT            0
+#define MT6359P_DA_VIO28_B_EN_ADDR               MT6359P_LDO_VIO28_MON
+#define MT6359P_RG_LDO_VM18_EN_ADDR              MT6359P_LDO_VM18_CON0
+#define MT6359P_RG_LDO_VM18_EN_SHIFT             0
+#define MT6359P_DA_VM18_B_EN_ADDR                MT6359P_LDO_VM18_MON
+#define MT6359P_RG_LDO_VUFS_EN_ADDR              MT6359P_LDO_VUFS_CON0
+#define MT6359P_RG_LDO_VUFS_EN_SHIFT             0
+#define MT6359P_DA_VUFS_B_EN_ADDR                MT6359P_LDO_VUFS_MON
+#define MT6359P_RG_LDO_VSRAM_PROC1_EN_ADDR       MT6359P_LDO_VSRAM_PROC1_CON0
+#define MT6359P_DA_VSRAM_PROC1_B_EN_ADDR         MT6359P_LDO_VSRAM_PROC1_MON
+#define MT6359P_DA_VSRAM_PROC1_VOSEL_ADDR        MT6359P_LDO_VSRAM_PROC1_VOSEL1
+#define MT6359P_RG_LDO_VSRAM_PROC2_EN_ADDR       MT6359P_LDO_VSRAM_PROC2_CON0
+#define MT6359P_DA_VSRAM_PROC2_B_EN_ADDR         MT6359P_LDO_VSRAM_PROC2_MON
+#define MT6359P_DA_VSRAM_PROC2_VOSEL_ADDR        MT6359P_LDO_VSRAM_PROC2_VOSEL1
+#define MT6359P_RG_LDO_VSRAM_OTHERS_EN_ADDR      MT6359P_LDO_VSRAM_OTHERS_CON0
+#define MT6359P_DA_VSRAM_OTHERS_B_EN_ADDR        MT6359P_LDO_VSRAM_OTHERS_MON
+#define MT6359P_DA_VSRAM_OTHERS_VOSEL_ADDR       MT6359P_LDO_VSRAM_OTHERS_VOSEL1
+#define MT6359P_RG_LDO_VSRAM_OTHERS_SSHUB_EN_ADDR    MT6359P_LDO_VSRAM_OTHERS_SSHUB
+#define MT6359P_RG_LDO_VSRAM_OTHERS_SSHUB_VOSEL_ADDR MT6359P_LDO_VSRAM_OTHERS_SSHUB
+#define MT6359P_RG_LDO_VSRAM_MD_EN_ADDR          MT6359P_LDO_VSRAM_MD_CON0
+#define MT6359P_DA_VSRAM_MD_B_EN_ADDR            MT6359P_LDO_VSRAM_MD_MON
+#define MT6359P_DA_VSRAM_MD_VOSEL_ADDR           MT6359P_LDO_VSRAM_MD_VOSEL1
+#define MT6359P_RG_VCN33_1_VOSEL_ADDR            MT6359P_VCN33_1_ANA_CON0
+#define MT6359P_RG_VCN33_2_VOSEL_ADDR            MT6359P_VCN33_2_ANA_CON0
+#define MT6359P_RG_VEMC_VOSEL_ADDR               MT6359P_VEMC_ANA_CON0
+#define MT6359P_RG_VSIM1_VOSEL_ADDR              MT6359P_VSIM1_ANA_CON0
+#define MT6359P_RG_VSIM2_VOSEL_ADDR              MT6359P_VSIM2_ANA_CON0
+#define MT6359P_RG_VIO28_VOSEL_ADDR              MT6359P_VIO28_ANA_CON0
+#define MT6359P_RG_VIBR_VOSEL_ADDR               MT6359P_VIBR_ANA_CON0
+#define MT6359P_RG_VRF18_VOSEL_ADDR              MT6359P_VRF18_ANA_CON0
+#define MT6359P_RG_VEFUSE_VOSEL_ADDR             MT6359P_VEFUSE_ANA_CON0
+#define MT6359P_RG_VCAMIO_VOSEL_ADDR             MT6359P_VCAMIO_ANA_CON0
+#define MT6359P_RG_VIO18_VOSEL_ADDR              MT6359P_VIO18_ANA_CON0
+#define MT6359P_RG_VM18_VOSEL_ADDR               MT6359P_VM18_ANA_CON0
+#define MT6359P_RG_VUFS_VOSEL_ADDR               MT6359P_VUFS_ANA_CON0
+#define MT6359P_RG_VRF12_VOSEL_ADDR              MT6359P_VRF12_ANA_CON0
+#define MT6359P_RG_VCN13_VOSEL_ADDR              MT6359P_VCN13_ANA_CON0
+#define MT6359P_RG_VA09_VOSEL_ADDR               MT6359P_VRF18_ELR_3
+#define MT6359P_RG_VA12_VOSEL_ADDR               MT6359P_VFE28_ELR_4
+#define MT6359P_RG_VXO22_VOSEL_ADDR              MT6359P_VXO22_ANA_CON0
+#define MT6359P_RG_VRFCK_VOSEL_ADDR              MT6359P_VRFCK_ANA_CON0
+#define MT6359P_RG_VBBCK_VOSEL_ADDR              MT6359P_VBBCK_ANA_CON0
+#define MT6359P_RG_VBBCK_VOSEL_MASK              0xF
+#define MT6359P_RG_VBBCK_VOSEL_SHIFT             4
+#define MT6359P_VM_MODE_ADDR                     MT6359P_TOP_TRAP
+#define MT6359P_TMA_KEY_ADDR                     MT6359P_TOP_TMA_KEY
+
+#define TMA_KEY 0x9CA6
+
+#endif /* __MFD_MT6359P_REGISTERS_H__ */
diff --git a/include/linux/regulator/mt6359-regulator.h b/include/linux/regulator/mt6359-regulator.h
index 14c4b715613e..6d6e5a58f482 100644
--- a/include/linux/regulator/mt6359-regulator.h
+++ b/include/linux/regulator/mt6359-regulator.h
@@ -17,6 +17,7 @@ enum {
 	MT6359_ID_VPROC2,
 	MT6359_ID_VPROC1,
 	MT6359_ID_VCORE_SSHUB,
+	MT6359_ID_VGPU11_SSHUB = MT6359_ID_VCORE_SSHUB,
 	MT6359_ID_VAUD18 = 10,
 	MT6359_ID_VSIM1,
 	MT6359_ID_VIBR,
-- 
cgit v1.2.3-59-g8ed1b


From a277a2622ca9609de09c18f660f0d10f1ddbb379 Mon Sep 17 00:00:00 2001
From: YueHaibing <yuehaibing@huawei.com>
Date: Sat, 29 May 2021 19:52:26 +0800
Subject: regulator: core: Use DEVICE_ATTR_RO macro

Use DEVICE_ATTR_RO() helper instead of plain DEVICE_ATTR(),
which makes the code a bit shorter and easier to read.

Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Link: https://lore.kernel.org/r/20210529115226.25376-1-yuehaibing@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
---
 drivers/regulator/core.c | 130 ++++++++++++++++++++++-------------------------
 1 file changed, 60 insertions(+), 70 deletions(-)

(limited to 'drivers/regulator')

diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c
index f192bf19492e..47f2d9a3707c 100644
--- a/drivers/regulator/core.c
+++ b/drivers/regulator/core.c
@@ -591,8 +591,8 @@ regulator_get_suspend_state_check(struct regulator_dev *rdev, suspend_state_t st
 	return rstate;
 }
 
-static ssize_t regulator_uV_show(struct device *dev,
-				struct device_attribute *attr, char *buf)
+static ssize_t microvolts_show(struct device *dev,
+			       struct device_attribute *attr, char *buf)
 {
 	struct regulator_dev *rdev = dev_get_drvdata(dev);
 	int uV;
@@ -605,16 +605,16 @@ static ssize_t regulator_uV_show(struct device *dev,
 		return uV;
 	return sprintf(buf, "%d\n", uV);
 }
-static DEVICE_ATTR(microvolts, 0444, regulator_uV_show, NULL);
+static DEVICE_ATTR_RO(microvolts);
 
-static ssize_t regulator_uA_show(struct device *dev,
-				struct device_attribute *attr, char *buf)
+static ssize_t microamps_show(struct device *dev,
+			      struct device_attribute *attr, char *buf)
 {
 	struct regulator_dev *rdev = dev_get_drvdata(dev);
 
 	return sprintf(buf, "%d\n", _regulator_get_current_limit(rdev));
 }
-static DEVICE_ATTR(microamps, 0444, regulator_uA_show, NULL);
+static DEVICE_ATTR_RO(microamps);
 
 static ssize_t name_show(struct device *dev, struct device_attribute *attr,
 			 char *buf)
@@ -645,14 +645,14 @@ static ssize_t regulator_print_opmode(char *buf, int mode)
 	return sprintf(buf, "%s\n", regulator_opmode_to_str(mode));
 }
 
-static ssize_t regulator_opmode_show(struct device *dev,
-				    struct device_attribute *attr, char *buf)
+static ssize_t opmode_show(struct device *dev,
+			   struct device_attribute *attr, char *buf)
 {
 	struct regulator_dev *rdev = dev_get_drvdata(dev);
 
 	return regulator_print_opmode(buf, _regulator_get_mode(rdev));
 }
-static DEVICE_ATTR(opmode, 0444, regulator_opmode_show, NULL);
+static DEVICE_ATTR_RO(opmode);
 
 static ssize_t regulator_print_state(char *buf, int state)
 {
@@ -664,8 +664,8 @@ static ssize_t regulator_print_state(char *buf, int state)
 		return sprintf(buf, "unknown\n");
 }
 
-static ssize_t regulator_state_show(struct device *dev,
-				   struct device_attribute *attr, char *buf)
+static ssize_t state_show(struct device *dev,
+			  struct device_attribute *attr, char *buf)
 {
 	struct regulator_dev *rdev = dev_get_drvdata(dev);
 	ssize_t ret;
@@ -676,10 +676,10 @@ static ssize_t regulator_state_show(struct device *dev,
 
 	return ret;
 }
-static DEVICE_ATTR(state, 0444, regulator_state_show, NULL);
+static DEVICE_ATTR_RO(state);
 
-static ssize_t regulator_status_show(struct device *dev,
-				   struct device_attribute *attr, char *buf)
+static ssize_t status_show(struct device *dev,
+			   struct device_attribute *attr, char *buf)
 {
 	struct regulator_dev *rdev = dev_get_drvdata(dev);
 	int status;
@@ -723,10 +723,10 @@ static ssize_t regulator_status_show(struct device *dev,
 
 	return sprintf(buf, "%s\n", label);
 }
-static DEVICE_ATTR(status, 0444, regulator_status_show, NULL);
+static DEVICE_ATTR_RO(status);
 
-static ssize_t regulator_min_uA_show(struct device *dev,
-				    struct device_attribute *attr, char *buf)
+static ssize_t min_microamps_show(struct device *dev,
+				  struct device_attribute *attr, char *buf)
 {
 	struct regulator_dev *rdev = dev_get_drvdata(dev);
 
@@ -735,10 +735,10 @@ static ssize_t regulator_min_uA_show(struct device *dev,
 
 	return sprintf(buf, "%d\n", rdev->constraints->min_uA);
 }
-static DEVICE_ATTR(min_microamps, 0444, regulator_min_uA_show, NULL);
+static DEVICE_ATTR_RO(min_microamps);
 
-static ssize_t regulator_max_uA_show(struct device *dev,
-				    struct device_attribute *attr, char *buf)
+static ssize_t max_microamps_show(struct device *dev,
+				  struct device_attribute *attr, char *buf)
 {
 	struct regulator_dev *rdev = dev_get_drvdata(dev);
 
@@ -747,10 +747,10 @@ static ssize_t regulator_max_uA_show(struct device *dev,
 
 	return sprintf(buf, "%d\n", rdev->constraints->max_uA);
 }
-static DEVICE_ATTR(max_microamps, 0444, regulator_max_uA_show, NULL);
+static DEVICE_ATTR_RO(max_microamps);
 
-static ssize_t regulator_min_uV_show(struct device *dev,
-				    struct device_attribute *attr, char *buf)
+static ssize_t min_microvolts_show(struct device *dev,
+				   struct device_attribute *attr, char *buf)
 {
 	struct regulator_dev *rdev = dev_get_drvdata(dev);
 
@@ -759,10 +759,10 @@ static ssize_t regulator_min_uV_show(struct device *dev,
 
 	return sprintf(buf, "%d\n", rdev->constraints->min_uV);
 }
-static DEVICE_ATTR(min_microvolts, 0444, regulator_min_uV_show, NULL);
+static DEVICE_ATTR_RO(min_microvolts);
 
-static ssize_t regulator_max_uV_show(struct device *dev,
-				    struct device_attribute *attr, char *buf)
+static ssize_t max_microvolts_show(struct device *dev,
+				   struct device_attribute *attr, char *buf)
 {
 	struct regulator_dev *rdev = dev_get_drvdata(dev);
 
@@ -771,10 +771,10 @@ static ssize_t regulator_max_uV_show(struct device *dev,
 
 	return sprintf(buf, "%d\n", rdev->constraints->max_uV);
 }
-static DEVICE_ATTR(max_microvolts, 0444, regulator_max_uV_show, NULL);
+static DEVICE_ATTR_RO(max_microvolts);
 
-static ssize_t regulator_total_uA_show(struct device *dev,
-				      struct device_attribute *attr, char *buf)
+static ssize_t requested_microamps_show(struct device *dev,
+					struct device_attribute *attr, char *buf)
 {
 	struct regulator_dev *rdev = dev_get_drvdata(dev);
 	struct regulator *regulator;
@@ -788,7 +788,7 @@ static ssize_t regulator_total_uA_show(struct device *dev,
 	regulator_unlock(rdev);
 	return sprintf(buf, "%d\n", uA);
 }
-static DEVICE_ATTR(requested_microamps, 0444, regulator_total_uA_show, NULL);
+static DEVICE_ATTR_RO(requested_microamps);
 
 static ssize_t num_users_show(struct device *dev, struct device_attribute *attr,
 			      char *buf)
@@ -813,104 +813,95 @@ static ssize_t type_show(struct device *dev, struct device_attribute *attr,
 }
 static DEVICE_ATTR_RO(type);
 
-static ssize_t regulator_suspend_mem_uV_show(struct device *dev,
-				struct device_attribute *attr, char *buf)
+static ssize_t suspend_mem_microvolts_show(struct device *dev,
+					   struct device_attribute *attr, char *buf)
 {
 	struct regulator_dev *rdev = dev_get_drvdata(dev);
 
 	return sprintf(buf, "%d\n", rdev->constraints->state_mem.uV);
 }
-static DEVICE_ATTR(suspend_mem_microvolts, 0444,
-		regulator_suspend_mem_uV_show, NULL);
+static DEVICE_ATTR_RO(suspend_mem_microvolts);
 
-static ssize_t regulator_suspend_disk_uV_show(struct device *dev,
-				struct device_attribute *attr, char *buf)
+static ssize_t suspend_disk_microvolts_show(struct device *dev,
+					    struct device_attribute *attr, char *buf)
 {
 	struct regulator_dev *rdev = dev_get_drvdata(dev);
 
 	return sprintf(buf, "%d\n", rdev->constraints->state_disk.uV);
 }
-static DEVICE_ATTR(suspend_disk_microvolts, 0444,
-		regulator_suspend_disk_uV_show, NULL);
+static DEVICE_ATTR_RO(suspend_disk_microvolts);
 
-static ssize_t regulator_suspend_standby_uV_show(struct device *dev,
-				struct device_attribute *attr, char *buf)
+static ssize_t suspend_standby_microvolts_show(struct device *dev,
+					       struct device_attribute *attr, char *buf)
 {
 	struct regulator_dev *rdev = dev_get_drvdata(dev);
 
 	return sprintf(buf, "%d\n", rdev->constraints->state_standby.uV);
 }
-static DEVICE_ATTR(suspend_standby_microvolts, 0444,
-		regulator_suspend_standby_uV_show, NULL);
+static DEVICE_ATTR_RO(suspend_standby_microvolts);
 
-static ssize_t regulator_suspend_mem_mode_show(struct device *dev,
-				struct device_attribute *attr, char *buf)
+static ssize_t suspend_mem_mode_show(struct device *dev,
+				     struct device_attribute *attr, char *buf)
 {
 	struct regulator_dev *rdev = dev_get_drvdata(dev);
 
 	return regulator_print_opmode(buf,
 		rdev->constraints->state_mem.mode);
 }
-static DEVICE_ATTR(suspend_mem_mode, 0444,
-		regulator_suspend_mem_mode_show, NULL);
+static DEVICE_ATTR_RO(suspend_mem_mode);
 
-static ssize_t regulator_suspend_disk_mode_show(struct device *dev,
-				struct device_attribute *attr, char *buf)
+static ssize_t suspend_disk_mode_show(struct device *dev,
+				      struct device_attribute *attr, char *buf)
 {
 	struct regulator_dev *rdev = dev_get_drvdata(dev);
 
 	return regulator_print_opmode(buf,
 		rdev->constraints->state_disk.mode);
 }
-static DEVICE_ATTR(suspend_disk_mode, 0444,
-		regulator_suspend_disk_mode_show, NULL);
+static DEVICE_ATTR_RO(suspend_disk_mode);
 
-static ssize_t regulator_suspend_standby_mode_show(struct device *dev,
-				struct device_attribute *attr, char *buf)
+static ssize_t suspend_standby_mode_show(struct device *dev,
+					 struct device_attribute *attr, char *buf)
 {
 	struct regulator_dev *rdev = dev_get_drvdata(dev);
 
 	return regulator_print_opmode(buf,
 		rdev->constraints->state_standby.mode);
 }
-static DEVICE_ATTR(suspend_standby_mode, 0444,
-		regulator_suspend_standby_mode_show, NULL);
+static DEVICE_ATTR_RO(suspend_standby_mode);
 
-static ssize_t regulator_suspend_mem_state_show(struct device *dev,
-				   struct device_attribute *attr, char *buf)
+static ssize_t suspend_mem_state_show(struct device *dev,
+				      struct device_attribute *attr, char *buf)
 {
 	struct regulator_dev *rdev = dev_get_drvdata(dev);
 
 	return regulator_print_state(buf,
 			rdev->constraints->state_mem.enabled);
 }
-static DEVICE_ATTR(suspend_mem_state, 0444,
-		regulator_suspend_mem_state_show, NULL);
+static DEVICE_ATTR_RO(suspend_mem_state);
 
-static ssize_t regulator_suspend_disk_state_show(struct device *dev,
-				   struct device_attribute *attr, char *buf)
+static ssize_t suspend_disk_state_show(struct device *dev,
+				       struct device_attribute *attr, char *buf)
 {
 	struct regulator_dev *rdev = dev_get_drvdata(dev);
 
 	return regulator_print_state(buf,
 			rdev->constraints->state_disk.enabled);
 }
-static DEVICE_ATTR(suspend_disk_state, 0444,
-		regulator_suspend_disk_state_show, NULL);
+static DEVICE_ATTR_RO(suspend_disk_state);
 
-static ssize_t regulator_suspend_standby_state_show(struct device *dev,
-				   struct device_attribute *attr, char *buf)
+static ssize_t suspend_standby_state_show(struct device *dev,
+					  struct device_attribute *attr, char *buf)
 {
 	struct regulator_dev *rdev = dev_get_drvdata(dev);
 
 	return regulator_print_state(buf,
 			rdev->constraints->state_standby.enabled);
 }
-static DEVICE_ATTR(suspend_standby_state, 0444,
-		regulator_suspend_standby_state_show, NULL);
+static DEVICE_ATTR_RO(suspend_standby_state);
 
-static ssize_t regulator_bypass_show(struct device *dev,
-				     struct device_attribute *attr, char *buf)
+static ssize_t bypass_show(struct device *dev,
+			   struct device_attribute *attr, char *buf)
 {
 	struct regulator_dev *rdev = dev_get_drvdata(dev);
 	const char *report;
@@ -928,8 +919,7 @@ static ssize_t regulator_bypass_show(struct device *dev,
 
 	return sprintf(buf, "%s\n", report);
 }
-static DEVICE_ATTR(bypass, 0444,
-		   regulator_bypass_show, NULL);
+static DEVICE_ATTR_RO(bypass);
 
 /* Calculate the new optimum regulator operating mode based on the new total
  * consumer load. All locks held by caller
-- 
cgit v1.2.3-59-g8ed1b


From de20b747c5836ffc6768914b95d7617139fac4f4 Mon Sep 17 00:00:00 2001
From: ChiYuan Huang <cy_huang@richtek.com>
Date: Wed, 2 Jun 2021 13:31:46 +0800
Subject: regulator: rt6160: Add support for Richtek RT6160

Add support for Richtek RT6160 voltage regulator. It can provide up
to 3A output current within the adjustable voltage from 2025mV
to 5200mV. It integrate a buckboost converter to support wide input
voltage range from 2200mV to 5500mV.

Signed-off-by: ChiYuan Huang <cy_huang@richtek.com>
Link: https://lore.kernel.org/r/1622611906-2403-2-git-send-email-u0084500@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
---
 drivers/regulator/Kconfig            |  11 ++
 drivers/regulator/Makefile           |   1 +
 drivers/regulator/rt6160-regulator.c | 332 +++++++++++++++++++++++++++++++++++
 3 files changed, 344 insertions(+)
 create mode 100644 drivers/regulator/rt6160-regulator.c

(limited to 'drivers/regulator')

diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
index bc02ea3ea2ef..50c608e6d006 100644
--- a/drivers/regulator/Kconfig
+++ b/drivers/regulator/Kconfig
@@ -1020,6 +1020,17 @@ config REGULATOR_RT5033
 	  RT5033 PMIC. The device supports multiple regulators like
 	  current source, LDO and Buck.
 
+config REGULATOR_RT6160
+	tristate "Richtek RT6160 BuckBoost voltage regulator"
+	depends on I2C
+	select REGMAP_I2C
+	help
+	  This adds support for voltage regulator in Richtek RT6160.
+	  This device automatically change voltage output mode from
+	  Buck or Boost. The mode transistion depend on the input source voltage.
+	  The wide output range is from 2025mV to 5200mV and can be used on most
+	  common application scenario.
+
 config REGULATOR_RTMV20
 	tristate "RTMV20 Laser Diode Regulator"
 	depends on I2C
diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile
index 6a5d55e209d3..4aa5533bd8ee 100644
--- a/drivers/regulator/Makefile
+++ b/drivers/regulator/Makefile
@@ -123,6 +123,7 @@ obj-$(CONFIG_REGULATOR_ROHM)	+= rohm-regulator.o
 obj-$(CONFIG_REGULATOR_RT4801)	+= rt4801-regulator.o
 obj-$(CONFIG_REGULATOR_RT4831)	+= rt4831-regulator.o
 obj-$(CONFIG_REGULATOR_RT5033)	+= rt5033-regulator.o
+obj-$(CONFIG_REGULATOR_RT6160)	+= rt6160-regulator.o
 obj-$(CONFIG_REGULATOR_RTMV20)	+= rtmv20-regulator.o
 obj-$(CONFIG_REGULATOR_S2MPA01) += s2mpa01.o
 obj-$(CONFIG_REGULATOR_S2MPS11) += s2mps11.o
diff --git a/drivers/regulator/rt6160-regulator.c b/drivers/regulator/rt6160-regulator.c
new file mode 100644
index 000000000000..4588ae0748a5
--- /dev/null
+++ b/drivers/regulator/rt6160-regulator.c
@@ -0,0 +1,332 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+#include <linux/delay.h>
+#include <linux/gpio/consumer.h>
+#include <linux/i2c.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/property.h>
+#include <linux/regmap.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/of_regulator.h>
+
+#define RT6160_MODE_AUTO	0
+#define RT6160_MODE_FPWM	1
+
+#define RT6160_REG_CNTL		0x01
+#define RT6160_REG_STATUS	0x02
+#define RT6160_REG_DEVID	0x03
+#define RT6160_REG_VSELL	0x04
+#define RT6160_REG_VSELH	0x05
+#define RT6160_NUM_REGS		(RT6160_REG_VSELH + 1)
+
+#define RT6160_FPWM_MASK	BIT(3)
+#define RT6160_RAMPRATE_MASK	GENMASK(1, 0)
+#define RT6160_VID_MASK		GENMASK(7, 4)
+#define RT6160_VSEL_MASK	GENMASK(6, 0)
+#define RT6160_HDSTAT_MASK	BIT(4)
+#define RT6160_UVSTAT_MASK	BIT(3)
+#define RT6160_OCSTAT_MASK	BIT(2)
+#define RT6160_TSDSTAT_MASK	BIT(1)
+#define RT6160_PGSTAT_MASK	BIT(0)
+
+#define RT6160_VENDOR_ID	0xA0
+#define RT6160_VOUT_MINUV	2025000
+#define RT6160_VOUT_MAXUV	5200000
+#define RT6160_VOUT_STPUV	25000
+#define RT6160_N_VOUTS		((RT6160_VOUT_MAXUV - RT6160_VOUT_MINUV) / RT6160_VOUT_STPUV + 1)
+
+#define RT6160_I2CRDY_TIMEUS	100
+
+struct rt6160_priv {
+	struct regulator_desc desc;
+	struct gpio_desc *enable_gpio;
+	struct regmap *regmap;
+	bool vsel_active_low;
+	bool enable_state;
+};
+
+static int rt6160_enable(struct regulator_dev *rdev)
+{
+	struct rt6160_priv *priv = rdev_get_drvdata(rdev);
+
+	if (!priv->enable_gpio)
+		return 0;
+
+	gpiod_set_value_cansleep(priv->enable_gpio, 1);
+	priv->enable_state = true;
+
+	usleep_range(RT6160_I2CRDY_TIMEUS, RT6160_I2CRDY_TIMEUS + 100);
+
+	regcache_cache_only(priv->regmap, false);
+	return regcache_sync(priv->regmap);
+}
+
+static int rt6160_disable(struct regulator_dev *rdev)
+{
+	struct rt6160_priv *priv = rdev_get_drvdata(rdev);
+
+	if (!priv->enable_gpio)
+		return -EINVAL;
+
+	/* Mark regcache as dirty and cache only before HW disabled */
+	regcache_cache_only(priv->regmap, true);
+	regcache_mark_dirty(priv->regmap);
+
+	priv->enable_state = false;
+	gpiod_set_value_cansleep(priv->enable_gpio, 0);
+
+	return 0;
+
+}
+
+static int rt6160_is_enabled(struct regulator_dev *rdev)
+{
+	struct rt6160_priv *priv = rdev_get_drvdata(rdev);
+
+	return priv->enable_state ? 1 : 0;
+}
+
+static int rt6160_set_mode(struct regulator_dev *rdev, unsigned int mode)
+{
+	struct regmap *regmap = rdev_get_regmap(rdev);
+	unsigned int mode_val;
+
+	switch (mode) {
+	case REGULATOR_MODE_FAST:
+		mode_val = RT6160_FPWM_MASK;
+		break;
+	case REGULATOR_MODE_NORMAL:
+		mode_val = 0;
+		break;
+	default:
+		dev_err(&rdev->dev, "mode not supported\n");
+		return -EINVAL;
+	}
+
+	return regmap_update_bits(regmap, RT6160_REG_CNTL, RT6160_FPWM_MASK, mode_val);
+}
+
+static unsigned int rt6160_get_mode(struct regulator_dev *rdev)
+{
+	struct regmap *regmap = rdev_get_regmap(rdev);
+	unsigned int val;
+	int ret;
+
+	ret = regmap_read(regmap, RT6160_REG_CNTL, &val);
+	if (ret)
+		return ret;
+
+	if (val & RT6160_FPWM_MASK)
+		return REGULATOR_MODE_FAST;
+
+	return REGULATOR_MODE_NORMAL;
+}
+
+static int rt6160_set_suspend_voltage(struct regulator_dev *rdev, int uV)
+{
+	struct rt6160_priv *priv = rdev_get_drvdata(rdev);
+	struct regmap *regmap = rdev_get_regmap(rdev);
+	unsigned int reg = RT6160_REG_VSELH;
+	int vsel;
+
+	vsel = regulator_map_voltage_linear(rdev, uV, uV);
+	if (vsel < 0)
+		return vsel;
+
+	if (priv->vsel_active_low)
+		reg = RT6160_REG_VSELL;
+
+	return regmap_update_bits(regmap, reg, RT6160_VSEL_MASK, vsel);
+}
+
+static int rt6160_set_ramp_delay(struct regulator_dev *rdev, int target)
+{
+	struct regmap *regmap = rdev_get_regmap(rdev);
+	const int ramp_tables[] = { 1000, 2500, 5000, 10000 };
+	unsigned int i, sel;
+
+	/* Find closest larger or equal */
+	for (i = 0; i < ARRAY_SIZE(ramp_tables); i++) {
+		sel = i;
+
+		/* If ramp delay is equal to 0, directly set ramp speed to fastest */
+		if (target == 0) {
+			sel = ARRAY_SIZE(ramp_tables) - 1;
+			break;
+		}
+
+		if (target <= ramp_tables[i])
+			break;
+	}
+
+	sel <<= ffs(RT6160_RAMPRATE_MASK) - 1;
+
+	return regmap_update_bits(regmap, RT6160_REG_CNTL, RT6160_RAMPRATE_MASK, sel);
+}
+
+static int rt6160_get_error_flags(struct regulator_dev *rdev, unsigned int *flags)
+{
+	struct regmap *regmap = rdev_get_regmap(rdev);
+	unsigned int val, events = 0;
+	int ret;
+
+	ret = regmap_read(regmap, RT6160_REG_STATUS, &val);
+	if (ret)
+		return ret;
+
+	if (val & (RT6160_HDSTAT_MASK | RT6160_TSDSTAT_MASK))
+		events |= REGULATOR_ERROR_OVER_TEMP;
+
+	if (val & RT6160_UVSTAT_MASK)
+		events |= REGULATOR_ERROR_UNDER_VOLTAGE;
+
+	if (val & RT6160_OCSTAT_MASK)
+		events |= REGULATOR_ERROR_OVER_CURRENT;
+
+	if (val & RT6160_PGSTAT_MASK)
+		events |= REGULATOR_ERROR_FAIL;
+
+	*flags = events;
+	return 0;
+}
+
+static const struct regulator_ops rt6160_regulator_ops = {
+	.list_voltage = regulator_list_voltage_linear,
+	.set_voltage_sel = regulator_set_voltage_sel_regmap,
+	.get_voltage_sel = regulator_get_voltage_sel_regmap,
+
+	.enable = rt6160_enable,
+	.disable = rt6160_disable,
+	.is_enabled = rt6160_is_enabled,
+
+	.set_mode = rt6160_set_mode,
+	.get_mode = rt6160_get_mode,
+	.set_suspend_voltage = rt6160_set_suspend_voltage,
+	.set_ramp_delay = rt6160_set_ramp_delay,
+	.get_error_flags = rt6160_get_error_flags,
+};
+
+static unsigned int rt6160_of_map_mode(unsigned int mode)
+{
+	switch (mode) {
+	case RT6160_MODE_FPWM:
+		return REGULATOR_MODE_FAST;
+	case RT6160_MODE_AUTO:
+		return REGULATOR_MODE_NORMAL;
+	}
+
+	return REGULATOR_MODE_INVALID;
+}
+
+static bool rt6160_is_accessible_reg(struct device *dev, unsigned int reg)
+{
+	if (reg >= RT6160_REG_CNTL && reg <= RT6160_REG_VSELH)
+		return true;
+	return false;
+}
+
+static bool rt6160_is_volatile_reg(struct device *dev, unsigned int reg)
+{
+	if (reg == RT6160_REG_STATUS)
+		return true;
+	return false;
+}
+
+static const struct regmap_config rt6160_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+	.max_register = RT6160_REG_VSELH,
+	.num_reg_defaults_raw = RT6160_NUM_REGS,
+	.cache_type = REGCACHE_FLAT,
+
+	.writeable_reg = rt6160_is_accessible_reg,
+	.readable_reg = rt6160_is_accessible_reg,
+	.volatile_reg = rt6160_is_volatile_reg,
+};
+
+static int rt6160_probe(struct i2c_client *i2c)
+{
+	struct rt6160_priv *priv;
+	struct regulator_config regulator_cfg = {};
+	struct regulator_dev *rdev;
+	unsigned int devid;
+	int ret;
+
+	priv = devm_kzalloc(&i2c->dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	priv->vsel_active_low = device_property_present(&i2c->dev, "richtek,vsel-active-low");
+
+	priv->enable_gpio = devm_gpiod_get_optional(&i2c->dev, "enable", GPIOD_OUT_HIGH);
+	if (IS_ERR(priv->enable_gpio)) {
+		dev_err(&i2c->dev, "Failed to get 'enable' gpio\n");
+		return PTR_ERR(priv->enable_gpio);
+	}
+	priv->enable_state = true;
+
+	usleep_range(RT6160_I2CRDY_TIMEUS, RT6160_I2CRDY_TIMEUS + 100);
+
+	priv->regmap = devm_regmap_init_i2c(i2c, &rt6160_regmap_config);
+	if (IS_ERR(priv->regmap)) {
+		ret = PTR_ERR(priv->regmap);
+		dev_err(&i2c->dev, "Failed to init regmap (%d)\n", ret);
+		return ret;
+	}
+
+	ret = regmap_read(priv->regmap, RT6160_REG_DEVID, &devid);
+	if (ret)
+		return ret;
+
+	if ((devid & RT6160_VID_MASK) != RT6160_VENDOR_ID) {
+		dev_err(&i2c->dev, "VID not correct [0x%02x]\n", devid);
+		return -ENODEV;
+	}
+
+	priv->desc.name = "rt6160-buckboost";
+	priv->desc.type = REGULATOR_VOLTAGE;
+	priv->desc.owner = THIS_MODULE;
+	priv->desc.min_uV = RT6160_VOUT_MINUV;
+	priv->desc.uV_step = RT6160_VOUT_STPUV;
+	priv->desc.vsel_reg = RT6160_REG_VSELH;
+	priv->desc.vsel_mask = RT6160_VSEL_MASK;
+	priv->desc.n_voltages = RT6160_N_VOUTS;
+	priv->desc.of_map_mode = rt6160_of_map_mode;
+	priv->desc.ops = &rt6160_regulator_ops;
+	if (priv->vsel_active_low)
+		priv->desc.vsel_reg = RT6160_REG_VSELL;
+
+	regulator_cfg.dev = &i2c->dev;
+	regulator_cfg.of_node = i2c->dev.of_node;
+	regulator_cfg.regmap = priv->regmap;
+	regulator_cfg.driver_data = priv;
+	regulator_cfg.init_data = of_get_regulator_init_data(&i2c->dev, i2c->dev.of_node,
+							     &priv->desc);
+
+	rdev = devm_regulator_register(&i2c->dev, &priv->desc, &regulator_cfg);
+	if (IS_ERR(rdev)) {
+		dev_err(&i2c->dev, "Failed to register regulator\n");
+		return PTR_ERR(rdev);
+	}
+
+	return 0;
+}
+
+static const struct of_device_id __maybe_unused rt6160_of_match_table[] = {
+	{ .compatible = "richtek,rt6160", },
+	{}
+};
+MODULE_DEVICE_TABLE(of, rt6160_of_match_table);
+
+static struct i2c_driver rt6160_driver = {
+	.driver = {
+		.name = "rt6160",
+		.of_match_table = rt6160_of_match_table,
+	},
+	.probe_new = rt6160_probe,
+};
+module_i2c_driver(rt6160_driver);
+
+MODULE_AUTHOR("ChiYuan Huang <cy_huang@richtek.com>");
+MODULE_LICENSE("GPL v2");
-- 
cgit v1.2.3-59-g8ed1b


From ba499a50ce5846dd6f7a6df92c1f01d4201b5cce Mon Sep 17 00:00:00 2001
From: Zhen Lei <thunder.leizhen@huawei.com>
Date: Wed, 2 Jun 2021 16:05:26 +0800
Subject: regulator: userspace-consumer: use DEVICE_ATTR_RO/RW macro

Use DEVICE_ATTR_RO/RW macro helper instead of plain DEVICE_ATTR, which
makes the code a bit shorter and easier to read.

Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Link: https://lore.kernel.org/r/20210602080526.11117-1-thunder.leizhen@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
---
 drivers/regulator/userspace-consumer.c | 14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)

(limited to 'drivers/regulator')

diff --git a/drivers/regulator/userspace-consumer.c b/drivers/regulator/userspace-consumer.c
index 8e3b5a67cfd8..8ca28664776e 100644
--- a/drivers/regulator/userspace-consumer.c
+++ b/drivers/regulator/userspace-consumer.c
@@ -29,15 +29,15 @@ struct userspace_consumer_data {
 	struct regulator_bulk_data *supplies;
 };
 
-static ssize_t reg_show_name(struct device *dev,
-			  struct device_attribute *attr, char *buf)
+static ssize_t name_show(struct device *dev,
+			 struct device_attribute *attr, char *buf)
 {
 	struct userspace_consumer_data *data = dev_get_drvdata(dev);
 
 	return sprintf(buf, "%s\n", data->name);
 }
 
-static ssize_t reg_show_state(struct device *dev,
+static ssize_t state_show(struct device *dev,
 			  struct device_attribute *attr, char *buf)
 {
 	struct userspace_consumer_data *data = dev_get_drvdata(dev);
@@ -48,8 +48,8 @@ static ssize_t reg_show_state(struct device *dev,
 	return sprintf(buf, "disabled\n");
 }
 
-static ssize_t reg_set_state(struct device *dev, struct device_attribute *attr,
-			 const char *buf, size_t count)
+static ssize_t state_store(struct device *dev, struct device_attribute *attr,
+			   const char *buf, size_t count)
 {
 	struct userspace_consumer_data *data = dev_get_drvdata(dev);
 	bool enabled;
@@ -87,8 +87,8 @@ static ssize_t reg_set_state(struct device *dev, struct device_attribute *attr,
 	return count;
 }
 
-static DEVICE_ATTR(name, 0444, reg_show_name, NULL);
-static DEVICE_ATTR(state, 0644, reg_show_state, reg_set_state);
+static DEVICE_ATTR_RO(name);
+static DEVICE_ATTR_RW(state);
 
 static struct attribute *attributes[] = {
 	&dev_attr_name.attr,
-- 
cgit v1.2.3-59-g8ed1b


From 8f4ef0788c68bf99370a91df5cb83f90d707583e Mon Sep 17 00:00:00 2001
From: Axel Lin <axel.lin@ingics.com>
Date: Sun, 23 May 2021 15:23:19 +0800
Subject: regulator: max77802: Remove .set_ramp_delay from
 max77802_buck_dvs_ops

max77802_set_ramp_delay_2bit() returns -EINVAL when id > MAX77802_BUCK4.
This was a leftover in commit b0615f1da543
("regulator: max77802: Split regulator operations for BUCKs").

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Link: https://lore.kernel.org/r/20210523072320.2174443-1-axel.lin@ingics.com
Signed-off-by: Mark Brown <broonie@kernel.org>
---
 drivers/regulator/max77802-regulator.c | 1 -
 1 file changed, 1 deletion(-)

(limited to 'drivers/regulator')

diff --git a/drivers/regulator/max77802-regulator.c b/drivers/regulator/max77802-regulator.c
index 7b8ec8c0bd15..903c6fc10efb 100644
--- a/drivers/regulator/max77802-regulator.c
+++ b/drivers/regulator/max77802-regulator.c
@@ -345,7 +345,6 @@ static const struct regulator_ops max77802_buck_dvs_ops = {
 	.get_voltage_sel	= regulator_get_voltage_sel_regmap,
 	.set_voltage_sel	= regulator_set_voltage_sel_regmap,
 	.set_voltage_time_sel	= regulator_set_voltage_time_sel,
-	.set_ramp_delay		= max77802_set_ramp_delay_2bit,
 	.set_suspend_disable	= max77802_set_suspend_disable,
 };
 
-- 
cgit v1.2.3-59-g8ed1b


From 8cdded982a6cf95d5ed7e3a014fb3d8dde6b3a94 Mon Sep 17 00:00:00 2001
From: Axel Lin <axel.lin@ingics.com>
Date: Sun, 23 May 2021 15:23:20 +0800
Subject: regulator: max77802: Convert to use regulator_set_ramp_delay_regmap

Use regulator_set_ramp_delay_regmap instead of open-coded.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Link: https://lore.kernel.org/r/20210523072320.2174443-2-axel.lin@ingics.com
Signed-off-by: Mark Brown <broonie@kernel.org>
---
 drivers/regulator/max77802-regulator.c | 69 ++++++----------------------------
 1 file changed, 12 insertions(+), 57 deletions(-)

(limited to 'drivers/regulator')

diff --git a/drivers/regulator/max77802-regulator.c b/drivers/regulator/max77802-regulator.c
index 903c6fc10efb..21e0eb0f43f9 100644
--- a/drivers/regulator/max77802-regulator.c
+++ b/drivers/regulator/max77802-regulator.c
@@ -43,15 +43,14 @@
 #define MAX77802_OFF_PWRREQ		0x1
 #define MAX77802_LP_PWRREQ		0x2
 
-/* MAX77802 has two register formats: 2-bit and 4-bit */
-static const unsigned int ramp_table_77802_2bit[] = {
+static const unsigned int max77802_buck234_ramp_table[] = {
 	12500,
 	25000,
 	50000,
 	100000,
 };
 
-static unsigned int ramp_table_77802_4bit[] = {
+static const unsigned int max77802_buck16_ramp_table[] = {
 	1000,	2000,	3030,	4000,
 	5000,	5880,	7140,	8330,
 	9090,	10000,	11110,	12500,
@@ -221,58 +220,6 @@ static int max77802_enable(struct regulator_dev *rdev)
 				  max77802->opmode[id] << shift);
 }
 
-static int max77802_find_ramp_value(struct regulator_dev *rdev,
-				    const unsigned int limits[], int size,
-				    unsigned int ramp_delay)
-{
-	int i;
-
-	for (i = 0; i < size; i++) {
-		if (ramp_delay <= limits[i])
-			return i;
-	}
-
-	/* Use maximum value for no ramp control */
-	dev_warn(&rdev->dev, "%s: ramp_delay: %d not supported, setting 100000\n",
-		 rdev->desc->name, ramp_delay);
-	return size - 1;
-}
-
-/* Used for BUCKs 2-4 */
-static int max77802_set_ramp_delay_2bit(struct regulator_dev *rdev,
-					int ramp_delay)
-{
-	int id = rdev_get_id(rdev);
-	unsigned int ramp_value;
-
-	if (id > MAX77802_BUCK4) {
-		dev_warn(&rdev->dev,
-			 "%s: regulator: ramp delay not supported\n",
-			 rdev->desc->name);
-		return -EINVAL;
-	}
-	ramp_value = max77802_find_ramp_value(rdev, ramp_table_77802_2bit,
-				ARRAY_SIZE(ramp_table_77802_2bit), ramp_delay);
-
-	return regmap_update_bits(rdev->regmap, rdev->desc->enable_reg,
-				  MAX77802_RAMP_RATE_MASK_2BIT,
-				  ramp_value << MAX77802_RAMP_RATE_SHIFT_2BIT);
-}
-
-/* For BUCK1, 6 */
-static int max77802_set_ramp_delay_4bit(struct regulator_dev *rdev,
-					    int ramp_delay)
-{
-	unsigned int ramp_value;
-
-	ramp_value = max77802_find_ramp_value(rdev, ramp_table_77802_4bit,
-				ARRAY_SIZE(ramp_table_77802_4bit), ramp_delay);
-
-	return regmap_update_bits(rdev->regmap, rdev->desc->enable_reg,
-				  MAX77802_RAMP_RATE_MASK_4BIT,
-				  ramp_value << MAX77802_RAMP_RATE_SHIFT_4BIT);
-}
-
 /*
  * LDOs 2, 4-19, 22-35
  */
@@ -316,7 +263,7 @@ static const struct regulator_ops max77802_buck_16_dvs_ops = {
 	.get_voltage_sel	= regulator_get_voltage_sel_regmap,
 	.set_voltage_sel	= regulator_set_voltage_sel_regmap,
 	.set_voltage_time_sel	= regulator_set_voltage_time_sel,
-	.set_ramp_delay		= max77802_set_ramp_delay_4bit,
+	.set_ramp_delay		= regulator_set_ramp_delay_regmap,
 	.set_suspend_disable	= max77802_set_suspend_disable,
 };
 
@@ -330,7 +277,7 @@ static const struct regulator_ops max77802_buck_234_ops = {
 	.get_voltage_sel	= regulator_get_voltage_sel_regmap,
 	.set_voltage_sel	= regulator_set_voltage_sel_regmap,
 	.set_voltage_time_sel	= regulator_set_voltage_time_sel,
-	.set_ramp_delay		= max77802_set_ramp_delay_2bit,
+	.set_ramp_delay		= regulator_set_ramp_delay_regmap,
 	.set_suspend_disable	= max77802_set_suspend_disable,
 	.set_suspend_mode	= max77802_set_suspend_mode,
 };
@@ -408,6 +355,10 @@ static const struct regulator_ops max77802_buck_dvs_ops = {
 	.vsel_mask	= MAX77802_DVS_VSEL_MASK,			\
 	.enable_reg	= MAX77802_REG_BUCK ## num ## CTRL,		\
 	.enable_mask	= MAX77802_OPMODE_MASK,				\
+	.ramp_reg	= MAX77802_REG_BUCK ## num ## CTRL,		\
+	.ramp_mask	= MAX77802_RAMP_RATE_MASK_4BIT,			\
+	.ramp_delay_table = max77802_buck16_ramp_table,			\
+	.n_ramp_values	= ARRAY_SIZE(max77802_buck16_ramp_table),	\
 	.of_map_mode	= max77802_map_mode,				\
 }
 
@@ -430,6 +381,10 @@ static const struct regulator_ops max77802_buck_dvs_ops = {
 	.enable_reg	= MAX77802_REG_BUCK ## num ## CTRL1,		\
 	.enable_mask	= MAX77802_OPMODE_MASK <<			\
 				MAX77802_OPMODE_BUCK234_SHIFT,		\
+	.ramp_reg	= MAX77802_REG_BUCK ## num ## CTRL1,		\
+	.ramp_mask	= MAX77802_RAMP_RATE_MASK_2BIT,			\
+	.ramp_delay_table = max77802_buck234_ramp_table,		\
+	.n_ramp_values	= ARRAY_SIZE(max77802_buck234_ramp_table),	\
 	.of_map_mode	= max77802_map_mode,				\
 }
 
-- 
cgit v1.2.3-59-g8ed1b


From 30b38b805b36c03db3703ef62397111c783b5f3b Mon Sep 17 00:00:00 2001
From: Axel Lin <axel.lin@ingics.com>
Date: Tue, 25 May 2021 20:40:16 +0800
Subject: regulator: fan53555: Fix missing slew_reg/mask/shift settings for
 FAN53526

The di->slew_reg/di->slew_mask/di->slew_shift was not set in current code,
fix it.

Fixes: f2a9eb975ab2 ("regulator: fan53555: Add support for FAN53526")
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Link: https://lore.kernel.org/r/20210525124017.2550029-1-axel.lin@ingics.com
Signed-off-by: Mark Brown <broonie@kernel.org>
---
 drivers/regulator/fan53555.c | 3 +++
 1 file changed, 3 insertions(+)

(limited to 'drivers/regulator')

diff --git a/drivers/regulator/fan53555.c b/drivers/regulator/fan53555.c
index f3f49cf3731b..9770a4df83d4 100644
--- a/drivers/regulator/fan53555.c
+++ b/drivers/regulator/fan53555.c
@@ -296,6 +296,9 @@ static int fan53526_voltages_setup_fairchild(struct fan53555_device_info *di)
 		return -EINVAL;
 	}
 
+	di->slew_reg = FAN53555_CONTROL;
+	di->slew_mask = CTL_SLEW_MASK;
+	di->slew_shift = CTL_SLEW_SHIFT;
 	di->vsel_count = FAN53526_NVOLTAGES;
 
 	return 0;
-- 
cgit v1.2.3-59-g8ed1b


From b61ac767db4d62540732cdac9f1820e56b9a5008 Mon Sep 17 00:00:00 2001
From: Axel Lin <axel.lin@ingics.com>
Date: Tue, 25 May 2021 20:40:17 +0800
Subject: regulator: fan53555: Convert to use regulator_set_ramp_delay_regmap

Use regulator_set_ramp_delay_regmap instead of open-coded.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Link: https://lore.kernel.org/r/20210525124017.2550029-2-axel.lin@ingics.com
Signed-off-by: Mark Brown <broonie@kernel.org>
---
 drivers/regulator/fan53555.c | 63 ++++++++++++--------------------------------
 1 file changed, 17 insertions(+), 46 deletions(-)

(limited to 'drivers/regulator')

diff --git a/drivers/regulator/fan53555.c b/drivers/regulator/fan53555.c
index 9770a4df83d4..eb67500ad279 100644
--- a/drivers/regulator/fan53555.c
+++ b/drivers/regulator/fan53555.c
@@ -126,7 +126,8 @@ struct fan53555_device_info {
 	/* Slew rate */
 	unsigned int slew_reg;
 	unsigned int slew_mask;
-	unsigned int slew_shift;
+	const unsigned int *ramp_delay_table;
+	unsigned int n_ramp_values;
 	unsigned int slew_rate;
 };
 
@@ -200,7 +201,7 @@ static unsigned int fan53555_get_mode(struct regulator_dev *rdev)
 		return REGULATOR_MODE_NORMAL;
 }
 
-static const int slew_rates[] = {
+static const unsigned int slew_rates[] = {
 	64000,
 	32000,
 	16000,
@@ -211,51 +212,13 @@ static const int slew_rates[] = {
 	  500,
 };
 
-static const int tcs_slew_rates[] = {
+static const unsigned int tcs_slew_rates[] = {
 	18700,
 	 9300,
 	 4600,
 	 2300,
 };
 
-static int fan53555_set_ramp(struct regulator_dev *rdev, int ramp)
-{
-	struct fan53555_device_info *di = rdev_get_drvdata(rdev);
-	int regval = -1, i;
-	const int *slew_rate_t;
-	int slew_rate_n;
-
-	switch (di->vendor) {
-	case FAN53526_VENDOR_FAIRCHILD:
-	case FAN53555_VENDOR_FAIRCHILD:
-	case FAN53555_VENDOR_SILERGY:
-		slew_rate_t = slew_rates;
-		slew_rate_n = ARRAY_SIZE(slew_rates);
-		break;
-	case FAN53526_VENDOR_TCS:
-		slew_rate_t = tcs_slew_rates;
-		slew_rate_n = ARRAY_SIZE(tcs_slew_rates);
-		break;
-	default:
-		return -EINVAL;
-	}
-
-	for (i = 0; i < slew_rate_n; i++) {
-		if (ramp <= slew_rate_t[i])
-			regval = i;
-		else
-			break;
-	}
-
-	if (regval < 0) {
-		dev_err(di->dev, "unsupported ramp value %d\n", ramp);
-		return -EINVAL;
-	}
-
-	return regmap_update_bits(rdev->regmap, di->slew_reg,
-				  di->slew_mask, regval << di->slew_shift);
-}
-
 static const struct regulator_ops fan53555_regulator_ops = {
 	.set_voltage_sel = regulator_set_voltage_sel_regmap,
 	.get_voltage_sel = regulator_get_voltage_sel_regmap,
@@ -268,7 +231,7 @@ static const struct regulator_ops fan53555_regulator_ops = {
 	.is_enabled = regulator_is_enabled_regmap,
 	.set_mode = fan53555_set_mode,
 	.get_mode = fan53555_get_mode,
-	.set_ramp_delay = fan53555_set_ramp,
+	.set_ramp_delay = regulator_set_ramp_delay_regmap,
 	.set_suspend_enable = fan53555_set_suspend_enable,
 	.set_suspend_disable = fan53555_set_suspend_disable,
 };
@@ -298,7 +261,8 @@ static int fan53526_voltages_setup_fairchild(struct fan53555_device_info *di)
 
 	di->slew_reg = FAN53555_CONTROL;
 	di->slew_mask = CTL_SLEW_MASK;
-	di->slew_shift = CTL_SLEW_SHIFT;
+	di->ramp_delay_table = slew_rates;
+	di->n_ramp_values = ARRAY_SIZE(slew_rates);
 	di->vsel_count = FAN53526_NVOLTAGES;
 
 	return 0;
@@ -343,7 +307,8 @@ static int fan53555_voltages_setup_fairchild(struct fan53555_device_info *di)
 	}
 	di->slew_reg = FAN53555_CONTROL;
 	di->slew_mask = CTL_SLEW_MASK;
-	di->slew_shift = CTL_SLEW_SHIFT;
+	di->ramp_delay_table = slew_rates;
+	di->n_ramp_values = ARRAY_SIZE(slew_rates);
 	di->vsel_count = FAN53555_NVOLTAGES;
 
 	return 0;
@@ -365,7 +330,8 @@ static int fan53555_voltages_setup_silergy(struct fan53555_device_info *di)
 	}
 	di->slew_reg = FAN53555_CONTROL;
 	di->slew_mask = CTL_SLEW_MASK;
-	di->slew_shift = CTL_SLEW_SHIFT;
+	di->ramp_delay_table = slew_rates;
+	di->n_ramp_values = ARRAY_SIZE(slew_rates);
 	di->vsel_count = FAN53555_NVOLTAGES;
 
 	return 0;
@@ -377,7 +343,8 @@ static int fan53526_voltages_setup_tcs(struct fan53555_device_info *di)
 	case TCS4525_CHIP_ID_12:
 		di->slew_reg = TCS4525_TIME;
 		di->slew_mask = TCS_SLEW_MASK;
-		di->slew_shift = TCS_SLEW_SHIFT;
+		di->ramp_delay_table = tcs_slew_rates;
+		di->n_ramp_values = ARRAY_SIZE(tcs_slew_rates);
 
 		/* Init voltage range and step */
 		di->vsel_min = 600000;
@@ -516,6 +483,10 @@ static int fan53555_regulator_register(struct fan53555_device_info *di,
 	rdesc->uV_step = di->vsel_step;
 	rdesc->vsel_reg = di->vol_reg;
 	rdesc->vsel_mask = di->vsel_count - 1;
+	rdesc->ramp_reg = di->slew_reg;
+	rdesc->ramp_mask = di->slew_mask;
+	rdesc->ramp_delay_table = di->ramp_delay_table;
+	rdesc->n_ramp_values = di->n_ramp_values;
 	rdesc->owner = THIS_MODULE;
 
 	rdev = devm_regulator_register(di->dev, &di->desc, config);
-- 
cgit v1.2.3-59-g8ed1b


From 6041d5fe512cd6ceaf730cdfa1786f2bc9b5b1b5 Mon Sep 17 00:00:00 2001
From: Axel Lin <axel.lin@ingics.com>
Date: Tue, 25 May 2021 18:04:05 +0800
Subject: regulator: bd9576: Constify the voltage tables

Also use unsigned int instead of int for the voltage tables.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Link: https://lore.kernel.org/r/20210525100405.2506483-1-axel.lin@ingics.com
Signed-off-by: Mark Brown <broonie@kernel.org>
---
 drivers/regulator/bd9576-regulator.c | 34 ++++++++++++++++++++--------------
 1 file changed, 20 insertions(+), 14 deletions(-)

(limited to 'drivers/regulator')

diff --git a/drivers/regulator/bd9576-regulator.c b/drivers/regulator/bd9576-regulator.c
index 204a2da054f5..8e63169eebae 100644
--- a/drivers/regulator/bd9576-regulator.c
+++ b/drivers/regulator/bd9576-regulator.c
@@ -21,20 +21,26 @@
 #define BD957X_VOUTS4_BASE_VOLT	1030000
 #define BD957X_VOUTS34_NUM_VOLT	32
 
-static int vout1_volt_table[] = {5000000, 4900000, 4800000, 4700000, 4600000,
-				 4500000, 4500000, 4500000, 5000000, 5100000,
-				 5200000, 5300000, 5400000, 5500000, 5500000,
-				 5500000};
-
-static int vout2_volt_table[] = {1800000, 1780000, 1760000, 1740000, 1720000,
-				 1700000, 1680000, 1660000, 1800000, 1820000,
-				 1840000, 1860000, 1880000, 1900000, 1920000,
-				 1940000};
-
-static int voutl1_volt_table[] = {2500000, 2540000, 2580000, 2620000, 2660000,
-				  2700000, 2740000, 2780000, 2500000, 2460000,
-				  2420000, 2380000, 2340000, 2300000, 2260000,
-				  2220000};
+static const unsigned int vout1_volt_table[] = {
+	5000000, 4900000, 4800000, 4700000, 4600000,
+	4500000, 4500000, 4500000, 5000000, 5100000,
+	5200000, 5300000, 5400000, 5500000, 5500000,
+	5500000
+};
+
+static const unsigned int vout2_volt_table[] = {
+	1800000, 1780000, 1760000, 1740000, 1720000,
+	1700000, 1680000, 1660000, 1800000, 1820000,
+	1840000, 1860000, 1880000, 1900000, 1920000,
+	1940000
+};
+
+static const unsigned int voutl1_volt_table[] = {
+	2500000, 2540000, 2580000, 2620000, 2660000,
+	2700000, 2740000, 2780000, 2500000, 2460000,
+	2420000, 2380000, 2340000, 2300000, 2260000,
+	2220000
+};
 
 struct bd957x_regulator_data {
 	struct regulator_desc desc;
-- 
cgit v1.2.3-59-g8ed1b


From a747070e9b629eeb70118651dfbd500bf8bb5ebe Mon Sep 17 00:00:00 2001
From: ChiYuan Huang <cy_huang@richtek.com>
Date: Thu, 3 Jun 2021 13:57:24 +0800
Subject: regulator: rt6245: Add support for Richtek RT6245

Richtek RT6245 is a high-performance, synchronous step-down converter
that can deliver up to 14A output current with an input supply voltage
range of 4.5V to 17V.

Signed-off-by: ChiYuan Huang <cy_huang@richtek.com>
Link: https://lore.kernel.org/r/1622699844-19203-2-git-send-email-u0084500@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
---
 drivers/regulator/Kconfig            |   9 ++
 drivers/regulator/Makefile           |   1 +
 drivers/regulator/rt6245-regulator.c | 254 +++++++++++++++++++++++++++++++++++
 3 files changed, 264 insertions(+)
 create mode 100644 drivers/regulator/rt6245-regulator.c

(limited to 'drivers/regulator')

diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
index 50c608e6d006..ef493f1d712d 100644
--- a/drivers/regulator/Kconfig
+++ b/drivers/regulator/Kconfig
@@ -1031,6 +1031,15 @@ config REGULATOR_RT6160
 	  The wide output range is from 2025mV to 5200mV and can be used on most
 	  common application scenario.
 
+config REGULATOR_RT6245
+	tristate "Richtek RT6245 voltage regulator"
+	depends on I2C
+	select REGMAP_I2C
+	help
+	  This adds supprot for Richtek RT6245 voltage regulator.
+	  It can support up to 14A output current and adjustable output voltage
+	  from 0.4375V to 1.3875V, per step 12.5mV.
+
 config REGULATOR_RTMV20
 	tristate "RTMV20 Laser Diode Regulator"
 	depends on I2C
diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile
index 4aa5533bd8ee..4143a418ff64 100644
--- a/drivers/regulator/Makefile
+++ b/drivers/regulator/Makefile
@@ -124,6 +124,7 @@ obj-$(CONFIG_REGULATOR_RT4801)	+= rt4801-regulator.o
 obj-$(CONFIG_REGULATOR_RT4831)	+= rt4831-regulator.o
 obj-$(CONFIG_REGULATOR_RT5033)	+= rt5033-regulator.o
 obj-$(CONFIG_REGULATOR_RT6160)	+= rt6160-regulator.o
+obj-$(CONFIG_REGULATOR_RT6245)	+= rt6245-regulator.o
 obj-$(CONFIG_REGULATOR_RTMV20)	+= rtmv20-regulator.o
 obj-$(CONFIG_REGULATOR_S2MPA01) += s2mpa01.o
 obj-$(CONFIG_REGULATOR_S2MPS11) += s2mps11.o
diff --git a/drivers/regulator/rt6245-regulator.c b/drivers/regulator/rt6245-regulator.c
new file mode 100644
index 000000000000..d3299a72fd10
--- /dev/null
+++ b/drivers/regulator/rt6245-regulator.c
@@ -0,0 +1,254 @@
+// SPDX-License-Identifier: GPL-2.0+
+
+#include <linux/bitops.h>
+#include <linux/delay.h>
+#include <linux/gpio/consumer.h>
+#include <linux/i2c.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/regmap.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/of_regulator.h>
+
+#define RT6245_VIRT_OCLIMIT	0x00
+#define RT6245_VIRT_OTLEVEL	0x01
+#define RT6245_VIRT_PGDLYTIME	0x02
+#define RT6245_VIRT_SLEWRATE	0x03
+#define RT6245_VIRT_SWFREQ	0x04
+#define RT6245_VIRT_VOUT	0x05
+
+#define RT6245_VOUT_MASK	GENMASK(6, 0)
+#define RT6245_SLEW_MASK	GENMASK(2, 0)
+#define RT6245_CHKSUM_MASK	BIT(7)
+#define RT6245_CODE_MASK	GENMASK(6, 0)
+
+/* HW Enable + Soft start time */
+#define RT6245_ENTIME_IN_US	5000
+
+#define RT6245_VOUT_MINUV	437500
+#define RT6245_VOUT_MAXUV	1387500
+#define RT6245_VOUT_STEPUV	12500
+#define RT6245_NUM_VOUT		((RT6245_VOUT_MAXUV - RT6245_VOUT_MINUV) / RT6245_VOUT_STEPUV + 1)
+
+struct rt6245_priv {
+	struct gpio_desc *enable_gpio;
+	bool enable_state;
+};
+
+static int rt6245_enable(struct regulator_dev *rdev)
+{
+	struct rt6245_priv *priv = rdev_get_drvdata(rdev);
+	struct regmap *regmap = rdev_get_regmap(rdev);
+	int ret;
+
+	if (!priv->enable_gpio)
+		return 0;
+
+	gpiod_direction_output(priv->enable_gpio, 1);
+	usleep_range(RT6245_ENTIME_IN_US, RT6245_ENTIME_IN_US + 1000);
+
+	regcache_cache_only(regmap, false);
+	ret = regcache_sync(regmap);
+	if (ret)
+		return ret;
+
+	priv->enable_state = true;
+	return 0;
+}
+
+static int rt6245_disable(struct regulator_dev *rdev)
+{
+	struct rt6245_priv *priv = rdev_get_drvdata(rdev);
+	struct regmap *regmap = rdev_get_regmap(rdev);
+
+	if (!priv->enable_gpio)
+		return -EINVAL;
+
+	regcache_cache_only(regmap, true);
+	regcache_mark_dirty(regmap);
+
+	gpiod_direction_output(priv->enable_gpio, 0);
+
+	priv->enable_state = false;
+	return 0;
+}
+
+static int rt6245_is_enabled(struct regulator_dev *rdev)
+{
+	struct rt6245_priv *priv = rdev_get_drvdata(rdev);
+
+	return priv->enable_state ? 1 : 0;
+}
+
+static const struct regulator_ops rt6245_regulator_ops = {
+	.list_voltage = regulator_list_voltage_linear,
+	.set_voltage_sel = regulator_set_voltage_sel_regmap,
+	.get_voltage_sel = regulator_get_voltage_sel_regmap,
+	.set_ramp_delay = regulator_set_ramp_delay_regmap,
+	.enable = rt6245_enable,
+	.disable = rt6245_disable,
+	.is_enabled = rt6245_is_enabled,
+};
+
+/* ramp delay dividend is 12500 uV/uS, and divisor from 1 to 8 */
+static const unsigned int rt6245_ramp_delay_table[] = {
+	12500, 6250, 4167, 3125, 2500, 2083, 1786, 1562
+};
+
+static const struct regulator_desc rt6245_regulator_desc = {
+	.name = "rt6245-regulator",
+	.ops = &rt6245_regulator_ops,
+	.type = REGULATOR_VOLTAGE,
+	.min_uV = RT6245_VOUT_MINUV,
+	.uV_step = RT6245_VOUT_STEPUV,
+	.n_voltages = RT6245_NUM_VOUT,
+	.ramp_delay_table = rt6245_ramp_delay_table,
+	.n_ramp_values = ARRAY_SIZE(rt6245_ramp_delay_table),
+	.owner = THIS_MODULE,
+	.vsel_reg = RT6245_VIRT_VOUT,
+	.vsel_mask = RT6245_VOUT_MASK,
+	.ramp_reg = RT6245_VIRT_SLEWRATE,
+	.ramp_mask = RT6245_SLEW_MASK,
+};
+
+static int rt6245_init_device_properties(struct device *dev)
+{
+	const struct {
+		const char *name;
+		unsigned int reg;
+	} rt6245_props[] = {
+		{ "richtek,oc-level-select",  RT6245_VIRT_OCLIMIT },
+		{ "richtek,ot-level-select", RT6245_VIRT_OTLEVEL },
+		{ "richtek,pgdly-time-select", RT6245_VIRT_PGDLYTIME },
+		{ "richtek,switch-freq-select", RT6245_VIRT_SWFREQ }
+	};
+	struct regmap *regmap = dev_get_regmap(dev, NULL);
+	u8 propval;
+	int i, ret;
+
+	for (i = 0; i < ARRAY_SIZE(rt6245_props); i++) {
+		ret = device_property_read_u8(dev, rt6245_props[i].name, &propval);
+		if (ret)
+			continue;
+
+		ret = regmap_write(regmap, rt6245_props[i].reg, propval);
+		if (ret) {
+			dev_err(dev, "Fail to apply [%s:%d]\n", rt6245_props[i].name, propval);
+			return ret;
+		}
+	}
+
+	return 0;
+}
+
+static int rt6245_reg_write(void *context, unsigned int reg, unsigned int val)
+{
+	struct i2c_client *i2c = context;
+	const u8 func_base[] = { 0x6F, 0x73, 0x78, 0x61, 0x7C, 0 };
+	unsigned int code, bit_count;
+
+	code = func_base[reg];
+	code += val;
+
+	/* xor checksum for bit 6 to 0 */
+	bit_count = hweight8(code & RT6245_CODE_MASK);
+	if (bit_count % 2)
+		code |= RT6245_CHKSUM_MASK;
+	else
+		code &= ~RT6245_CHKSUM_MASK;
+
+	return i2c_smbus_write_byte(i2c, code);
+}
+
+static const struct reg_default rt6245_reg_defaults[] = {
+	/* Default over current 14A */
+	{ RT6245_VIRT_OCLIMIT, 2 },
+	/* Default over temperature 150'c */
+	{ RT6245_VIRT_OTLEVEL, 0 },
+	/* Default power good delay time 10us */
+	{ RT6245_VIRT_PGDLYTIME, 1 },
+	/* Default slewrate 12.5mV/uS */
+	{ RT6245_VIRT_SLEWRATE, 0 },
+	/* Default switch frequency 800KHz */
+	{ RT6245_VIRT_SWFREQ, 1 },
+	/* Default voltage 750mV */
+	{ RT6245_VIRT_VOUT, 0x19 }
+};
+
+static const struct regmap_config rt6245_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+	.max_register = RT6245_VIRT_VOUT,
+	.cache_type = REGCACHE_FLAT,
+	.reg_defaults = rt6245_reg_defaults,
+	.num_reg_defaults = ARRAY_SIZE(rt6245_reg_defaults),
+	.reg_write = rt6245_reg_write,
+};
+
+static int rt6245_probe(struct i2c_client *i2c)
+{
+	struct rt6245_priv *priv;
+	struct regmap *regmap;
+	struct regulator_config regulator_cfg = {};
+	struct regulator_dev *rdev;
+	int ret;
+
+	priv = devm_kzalloc(&i2c->dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	priv->enable_state = true;
+
+	priv->enable_gpio = devm_gpiod_get_optional(&i2c->dev, "enable", GPIOD_OUT_HIGH);
+	if (IS_ERR(priv->enable_gpio)) {
+		dev_err(&i2c->dev, "Failed to get 'enable' gpio\n");
+		return PTR_ERR(priv->enable_gpio);
+	}
+
+	usleep_range(RT6245_ENTIME_IN_US, RT6245_ENTIME_IN_US + 1000);
+
+	regmap = devm_regmap_init(&i2c->dev, NULL, i2c, &rt6245_regmap_config);
+	if (IS_ERR(regmap)) {
+		dev_err(&i2c->dev, "Failed to initialize the regmap\n");
+		return PTR_ERR(regmap);
+	}
+
+	ret = rt6245_init_device_properties(&i2c->dev);
+	if (ret) {
+		dev_err(&i2c->dev, "Failed to initialize device properties\n");
+		return ret;
+	}
+
+	regulator_cfg.dev = &i2c->dev;
+	regulator_cfg.of_node = i2c->dev.of_node;
+	regulator_cfg.regmap = regmap;
+	regulator_cfg.driver_data = priv;
+	regulator_cfg.init_data = of_get_regulator_init_data(&i2c->dev, i2c->dev.of_node,
+							     &rt6245_regulator_desc);
+	rdev = devm_regulator_register(&i2c->dev, &rt6245_regulator_desc, &regulator_cfg);
+	if (IS_ERR(rdev)) {
+		dev_err(&i2c->dev, "Failed to register regulator\n");
+		return PTR_ERR(rdev);
+	}
+
+	return 0;
+}
+
+static const struct of_device_id __maybe_unused rt6245_of_match_table[] = {
+	{ .compatible = "richtek,rt6245", },
+	{}
+};
+MODULE_DEVICE_TABLE(of, rt6245_of_match_table);
+
+static struct i2c_driver rt6245_driver = {
+	.driver = {
+		.name = "rt6245",
+		.of_match_table = rt6245_of_match_table,
+	},
+	.probe_new = rt6245_probe,
+};
+module_i2c_driver(rt6245_driver);
+
+MODULE_AUTHOR("ChiYuan Huang <cy_huang@richtek.com>");
+MODULE_DESCRIPTION("Richtek RT6245 Regulator Driver");
+MODULE_LICENSE("GPL v2");
-- 
cgit v1.2.3-59-g8ed1b


From 5eee5eced95f1b35c8567688ed52932b7e58deee Mon Sep 17 00:00:00 2001
From: Rudi Heitbaum <rudi@heitbaum.com>
Date: Wed, 2 Jun 2021 11:29:47 +0000
Subject: regulator: fan53555: add tcs4526

For rk3399pro boards the tcs4526 regulator supports the vdd_gpu
regulator. The tcs4526 regulator has a chip id of <0>.
Add the compatibile tcs,tcs4526

without this patch, the dmesg output is:
  fan53555-regulator 0-0010: Chip ID 0 not supported!
  fan53555-regulator 0-0010: Failed to setup device!
  fan53555-regulator: probe of 0-0010 failed with error -22
with this patch, the dmesg output is:
  vdd_gpu: supplied by vcc5v0_sys

The regulators are described as:
- Dedicated power management IC TCS4525
- Lithium battery protection chip TCS4526

This has been tested with a Radxa Rock Pi N10.

Signed-off-by: Rudi Heitbaum <rudi@heitbaum.com>
Link: https://lore.kernel.org/r/20210602112943.GA119@5f9be87369f8
Signed-off-by: Mark Brown <broonie@kernel.org>
---
 drivers/regulator/fan53555.c | 11 +++++++++++
 1 file changed, 11 insertions(+)

(limited to 'drivers/regulator')

diff --git a/drivers/regulator/fan53555.c b/drivers/regulator/fan53555.c
index eb67500ad279..dac1fb584fa3 100644
--- a/drivers/regulator/fan53555.c
+++ b/drivers/regulator/fan53555.c
@@ -92,6 +92,10 @@ enum {
 	TCS4525_CHIP_ID_12 = 12,
 };
 
+enum {
+	TCS4526_CHIP_ID_00 = 0,
+};
+
 /* IC mask revision */
 enum {
 	FAN53555_CHIP_REV_00 = 0x3,
@@ -341,6 +345,7 @@ static int fan53526_voltages_setup_tcs(struct fan53555_device_info *di)
 {
 	switch (di->chip_id) {
 	case TCS4525_CHIP_ID_12:
+	case TCS4526_CHIP_ID_00:
 		di->slew_reg = TCS4525_TIME;
 		di->slew_mask = TCS_SLEW_MASK;
 		di->ramp_delay_table = tcs_slew_rates;
@@ -536,6 +541,9 @@ static const struct of_device_id __maybe_unused fan53555_dt_ids[] = {
 	}, {
 		.compatible = "tcs,tcs4525",
 		.data = (void *)FAN53526_VENDOR_TCS
+	}, {
+		.compatible = "tcs,tcs4526",
+		.data = (void *)FAN53526_VENDOR_TCS
 	},
 	{ }
 };
@@ -644,6 +652,9 @@ static const struct i2c_device_id fan53555_id[] = {
 	}, {
 		.name = "tcs4525",
 		.driver_data = FAN53526_VENDOR_TCS
+	}, {
+		.name = "tcs4526",
+		.driver_data = FAN53526_VENDOR_TCS
 	},
 	{ },
 };
-- 
cgit v1.2.3-59-g8ed1b


From 3c37d899ef8bd9940f9eee551c6c0b16b36aa1e2 Mon Sep 17 00:00:00 2001
From: Axel Lin <axel.lin@ingics.com>
Date: Sat, 5 Jun 2021 09:34:24 +0800
Subject: regulator: max77686: Convert to use regulator_set_ramp_delay_regmap

Use regulator_set_ramp_delay_regmap instead of open-coded.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Link: https://lore.kernel.org/r/20210605013424.1298773-1-axel.lin@ingics.com
Signed-off-by: Mark Brown <broonie@kernel.org>
---
 drivers/regulator/max77686-regulator.c | 42 ++++++++--------------------------
 1 file changed, 9 insertions(+), 33 deletions(-)

(limited to 'drivers/regulator')

diff --git a/drivers/regulator/max77686-regulator.c b/drivers/regulator/max77686-regulator.c
index 9089ec608fcc..55a07d3f3ee2 100644
--- a/drivers/regulator/max77686-regulator.c
+++ b/drivers/regulator/max77686-regulator.c
@@ -67,13 +67,6 @@
 #define MAX77686_REGULATORS	MAX77686_REG_MAX
 #define MAX77686_LDOS		26
 
-enum max77686_ramp_rate {
-	RAMP_RATE_13P75MV,
-	RAMP_RATE_27P5MV,
-	RAMP_RATE_55MV,
-	RAMP_RATE_NO_CTRL,	/* 100mV/us */
-};
-
 struct max77686_data {
 	struct device *dev;
 	DECLARE_BITMAP(gpio_enabled, MAX77686_REGULATORS);
@@ -220,31 +213,6 @@ static int max77686_enable(struct regulator_dev *rdev)
 				  max77686->opmode[id] << shift);
 }
 
-static int max77686_set_ramp_delay(struct regulator_dev *rdev, int ramp_delay)
-{
-	unsigned int ramp_value = RAMP_RATE_NO_CTRL;
-
-	switch (ramp_delay) {
-	case 1 ... 13750:
-		ramp_value = RAMP_RATE_13P75MV;
-		break;
-	case 13751 ... 27500:
-		ramp_value = RAMP_RATE_27P5MV;
-		break;
-	case 27501 ... 55000:
-		ramp_value = RAMP_RATE_55MV;
-		break;
-	case 55001 ... 100000:
-		break;
-	default:
-		pr_warn("%s: ramp_delay: %d not supported, setting 100000\n",
-			rdev->desc->name, ramp_delay);
-	}
-
-	return regmap_update_bits(rdev->regmap, rdev->desc->enable_reg,
-				  MAX77686_RAMP_RATE_MASK, ramp_value << 6);
-}
-
 static int max77686_of_parse_cb(struct device_node *np,
 		const struct regulator_desc *desc,
 		struct regulator_config *config)
@@ -284,6 +252,10 @@ static int max77686_of_parse_cb(struct device_node *np,
 	return 0;
 }
 
+static const unsigned int max77686_buck_dvs_ramp_table[] = {
+	13750, 27500, 55000, 100000
+};
+
 static const struct regulator_ops max77686_ops = {
 	.list_voltage		= regulator_list_voltage_linear,
 	.map_voltage		= regulator_map_voltage_linear,
@@ -330,7 +302,7 @@ static const struct regulator_ops max77686_buck_dvs_ops = {
 	.get_voltage_sel	= regulator_get_voltage_sel_regmap,
 	.set_voltage_sel	= regulator_set_voltage_sel_regmap,
 	.set_voltage_time_sel	= regulator_set_voltage_time_sel,
-	.set_ramp_delay		= max77686_set_ramp_delay,
+	.set_ramp_delay		= regulator_set_ramp_delay_regmap,
 	.set_suspend_disable	= max77686_set_suspend_disable,
 };
 
@@ -462,6 +434,10 @@ static const struct regulator_ops max77686_buck_dvs_ops = {
 	.enable_reg	= MAX77686_REG_BUCK2CTRL1 + (num - 2) * 10,	\
 	.enable_mask	= MAX77686_OPMODE_MASK				\
 			<< MAX77686_OPMODE_BUCK234_SHIFT,		\
+	.ramp_reg	= MAX77686_REG_BUCK2CTRL1 + (num - 2) * 10,	\
+	.ramp_mask	= MAX77686_RAMP_RATE_MASK,			\
+	.ramp_delay_table = max77686_buck_dvs_ramp_table,		\
+	.n_ramp_values	= ARRAY_SIZE(max77686_buck_dvs_ramp_table),	\
 }
 
 static const struct regulator_desc regulators[] = {
-- 
cgit v1.2.3-59-g8ed1b


From 431ea63b647fb35a0ff7f40f19c2bbd22abeb564 Mon Sep 17 00:00:00 2001
From: Axel Lin <axel.lin@ingics.com>
Date: Sun, 6 Jun 2021 14:50:50 +0800
Subject: regulator: mt6358: Use unsigned int for volt_tables

The regulator_desc expects "const unsigned int *volt_table", thus use
unsigned int instead of u32.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Link: https://lore.kernel.org/r/20210606065052.1417111-1-axel.lin@ingics.com
Signed-off-by: Mark Brown <broonie@kernel.org>
---
 drivers/regulator/mt6358-regulator.c | 22 +++++++++++-----------
 1 file changed, 11 insertions(+), 11 deletions(-)

(limited to 'drivers/regulator')

diff --git a/drivers/regulator/mt6358-regulator.c b/drivers/regulator/mt6358-regulator.c
index 13cb6ac9a892..7c68d27d52bb 100644
--- a/drivers/regulator/mt6358-regulator.c
+++ b/drivers/regulator/mt6358-regulator.c
@@ -153,50 +153,50 @@ static const struct linear_range buck_volt_range4[] = {
 	REGULATOR_LINEAR_RANGE(1000000, 0, 0x7f, 12500),
 };
 
-static const u32 vdram2_voltages[] = {
+static const unsigned int vdram2_voltages[] = {
 	600000, 1800000,
 };
 
-static const u32 vsim_voltages[] = {
+static const unsigned int vsim_voltages[] = {
 	1700000, 1800000, 2700000, 3000000, 3100000,
 };
 
-static const u32 vibr_voltages[] = {
+static const unsigned int vibr_voltages[] = {
 	1200000, 1300000, 1500000, 1800000,
 	2000000, 2800000, 3000000, 3300000,
 };
 
-static const u32 vusb_voltages[] = {
+static const unsigned int vusb_voltages[] = {
 	3000000, 3100000,
 };
 
-static const u32 vcamd_voltages[] = {
+static const unsigned int vcamd_voltages[] = {
 	900000, 1000000, 1100000, 1200000,
 	1300000, 1500000, 1800000,
 };
 
-static const u32 vefuse_voltages[] = {
+static const unsigned int vefuse_voltages[] = {
 	1700000, 1800000, 1900000,
 };
 
-static const u32 vmch_vemc_voltages[] = {
+static const unsigned int vmch_vemc_voltages[] = {
 	2900000, 3000000, 3300000,
 };
 
-static const u32 vcama_voltages[] = {
+static const unsigned int vcama_voltages[] = {
 	1800000, 2500000, 2700000,
 	2800000, 2900000, 3000000,
 };
 
-static const u32 vcn33_bt_wifi_voltages[] = {
+static const unsigned int vcn33_bt_wifi_voltages[] = {
 	3300000, 3400000, 3500000,
 };
 
-static const u32 vmc_voltages[] = {
+static const unsigned int vmc_voltages[] = {
 	1800000, 2900000, 3000000, 3300000,
 };
 
-static const u32 vldo28_voltages[] = {
+static const unsigned int vldo28_voltages[] = {
 	2800000, 3000000,
 };
 
-- 
cgit v1.2.3-59-g8ed1b


From 5a5e31150c9ecdb76d3f87ed852f5c650d70c7d2 Mon Sep 17 00:00:00 2001
From: Axel Lin <axel.lin@ingics.com>
Date: Sun, 6 Jun 2021 14:50:51 +0800
Subject: regulator: mt6359: Use unsigned int for volt_tables

The regulator_desc expects "const unsigned int *volt_table", thus use
unsigned int instead of u32.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Link: https://lore.kernel.org/r/20210606065052.1417111-2-axel.lin@ingics.com
Signed-off-by: Mark Brown <broonie@kernel.org>
---
 drivers/regulator/mt6359-regulator.c | 36 ++++++++++++++++++------------------
 1 file changed, 18 insertions(+), 18 deletions(-)

(limited to 'drivers/regulator')

diff --git a/drivers/regulator/mt6359-regulator.c b/drivers/regulator/mt6359-regulator.c
index 4f517c9fd6c4..8003c363cdfd 100644
--- a/drivers/regulator/mt6359-regulator.c
+++ b/drivers/regulator/mt6359-regulator.c
@@ -203,77 +203,77 @@ static const struct linear_range mt_volt_range8[] = {
 	REGULATOR_LINEAR_RANGE(506250, 0, 0x7f, 6250),
 };
 
-static const u32 vsim1_voltages[] = {
+static const unsigned int vsim1_voltages[] = {
 	0, 0, 0, 1700000, 1800000, 0, 0, 0, 2700000, 0, 0, 3000000, 3100000,
 };
 
-static const u32 vibr_voltages[] = {
+static const unsigned int vibr_voltages[] = {
 	1200000, 1300000, 1500000, 0, 1800000, 2000000, 0, 0, 2700000, 2800000,
 	0, 3000000, 0, 3300000,
 };
 
-static const u32 vrf12_voltages[] = {
+static const unsigned int vrf12_voltages[] = {
 	0, 0, 1100000, 1200000,	1300000,
 };
 
-static const u32 volt18_voltages[] = {
+static const unsigned int volt18_voltages[] = {
 	0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1700000, 1800000, 1900000,
 };
 
-static const u32 vcn13_voltages[] = {
+static const unsigned int vcn13_voltages[] = {
 	900000, 1000000, 0, 1200000, 1300000,
 };
 
-static const u32 vcn33_voltages[] = {
+static const unsigned int vcn33_voltages[] = {
 	0, 0, 0, 0, 0, 0, 0, 0, 0, 2800000, 0, 0, 0, 3300000, 3400000, 3500000,
 };
 
-static const u32 vefuse_voltages[] = {
+static const unsigned int vefuse_voltages[] = {
 	0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1700000, 1800000, 1900000, 2000000,
 };
 
-static const u32 vxo22_voltages[] = {
+static const unsigned int vxo22_voltages[] = {
 	1800000, 0, 0, 0, 2200000,
 };
 
-static const u32 vrfck_voltages[] = {
+static const unsigned int vrfck_voltages[] = {
 	0, 0, 1500000, 0, 0, 0, 0, 1600000, 0, 0, 0, 0, 1700000,
 };
 
-static const u32 vrfck_voltages_1[] = {
+static const unsigned int vrfck_voltages_1[] = {
 	1240000, 1600000,
 };
 
-static const u32 vio28_voltages[] = {
+static const unsigned int vio28_voltages[] = {
 	0, 0, 0, 0, 0, 0, 0, 0, 0, 2800000, 2900000, 3000000, 3100000, 3300000,
 };
 
-static const u32 vemc_voltages[] = {
+static const unsigned int vemc_voltages[] = {
 	0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 2900000, 3000000, 0, 3300000,
 };
 
-static const u32 vemc_voltages_1[] = {
+static const unsigned int vemc_voltages_1[] = {
 	0, 0, 0, 0, 0, 0, 0, 0, 2500000, 2800000, 2900000, 3000000, 3100000,
 	3300000,
 };
 
-static const u32 va12_voltages[] = {
+static const unsigned int va12_voltages[] = {
 	0, 0, 0, 0, 0, 0, 1200000, 1300000,
 };
 
-static const u32 va09_voltages[] = {
+static const unsigned int va09_voltages[] = {
 	0, 0, 800000, 900000, 0, 0, 1200000,
 };
 
-static const u32 vrf18_voltages[] = {
+static const unsigned int vrf18_voltages[] = {
 	0, 0, 0, 0, 0, 1700000, 1800000, 1810000,
 };
 
-static const u32 vbbck_voltages[] = {
+static const unsigned int vbbck_voltages[] = {
 	0, 0, 0, 0, 1100000, 0, 0, 0, 1150000, 0, 0, 0, 1200000,
 };
 
-static const u32 vsim2_voltages[] = {
+static const unsigned int vsim2_voltages[] = {
 	0, 0, 0, 1700000, 1800000, 0, 0, 0, 2700000, 0, 0, 3000000, 3100000,
 };
 
-- 
cgit v1.2.3-59-g8ed1b


From 73d4ae57f82ec1e5fc92b9acd25bb1db2f8cf8e3 Mon Sep 17 00:00:00 2001
From: Axel Lin <axel.lin@ingics.com>
Date: Sun, 6 Jun 2021 14:50:52 +0800
Subject: regulator: mt6359: Get rid of linear_range tables

The MT6359_BUCK and MT6359_LDO_LINEAR macros setup both
linear settings (min_uV, uV_step, linear_min_sel) and linar_range
(linear_ranges, n_linear_ranges) settings.
All the linear range tables actually only has one entry.
Let's simplify it by using linear instead of linear range.

The linear_min_sel setting is 0 for all cases, remove it
from the macros.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Link: https://lore.kernel.org/r/20210606065052.1417111-3-axel.lin@ingics.com
Signed-off-by: Mark Brown <broonie@kernel.org>
---
 drivers/regulator/mt6359-regulator.c | 157 +++++++++++++----------------------
 1 file changed, 59 insertions(+), 98 deletions(-)

(limited to 'drivers/regulator')

diff --git a/drivers/regulator/mt6359-regulator.c b/drivers/regulator/mt6359-regulator.c
index 8003c363cdfd..7ce0bd377a08 100644
--- a/drivers/regulator/mt6359-regulator.c
+++ b/drivers/regulator/mt6359-regulator.c
@@ -41,8 +41,8 @@ struct mt6359_regulator_info {
 	u32 lp_mode_shift;
 };
 
-#define MT6359_BUCK(match, _name, min, max, step, min_sel,	\
-	volt_ranges, _enable_reg, _status_reg,			\
+#define MT6359_BUCK(match, _name, min, max, step,		\
+	_enable_reg, _status_reg,				\
 	_vsel_reg, _vsel_mask,					\
 	_lp_mode_reg, _lp_mode_shift,				\
 	_modeset_reg, _modeset_shift)				\
@@ -51,16 +51,13 @@ struct mt6359_regulator_info {
 		.name = #_name,					\
 		.of_match = of_match_ptr(match),		\
 		.regulators_node = of_match_ptr("regulators"),	\
-		.ops = &mt6359_volt_range_ops,			\
+		.ops = &mt6359_volt_linear_ops,			\
 		.type = REGULATOR_VOLTAGE,			\
 		.id = MT6359_ID_##_name,			\
 		.owner = THIS_MODULE,				\
 		.uV_step = (step),				\
-		.linear_min_sel = (min_sel),			\
 		.n_voltages = ((max) - (min)) / (step) + 1,	\
 		.min_uV = (min),				\
-		.linear_ranges = volt_ranges,			\
-		.n_linear_ranges = ARRAY_SIZE(volt_ranges),	\
 		.vsel_reg = _vsel_reg,				\
 		.vsel_mask = _vsel_mask,			\
 		.enable_reg = _enable_reg,			\
@@ -77,24 +74,20 @@ struct mt6359_regulator_info {
 	.modeset_shift = _modeset_shift				\
 }
 
-#define MT6359_LDO_LINEAR(match, _name, min, max, step, min_sel,\
-	volt_ranges, _enable_reg, _status_reg,			\
-	_vsel_reg, _vsel_mask)					\
+#define MT6359_LDO_LINEAR(match, _name, min, max, step,		\
+	_enable_reg, _status_reg, _vsel_reg, _vsel_mask)	\
 [MT6359_ID_##_name] = {						\
 	.desc = {						\
 		.name = #_name,					\
 		.of_match = of_match_ptr(match),		\
 		.regulators_node = of_match_ptr("regulators"),	\
-		.ops = &mt6359_volt_range_ops,			\
+		.ops = &mt6359_volt_linear_ops,			\
 		.type = REGULATOR_VOLTAGE,			\
 		.id = MT6359_ID_##_name,			\
 		.owner = THIS_MODULE,				\
 		.uV_step = (step),				\
-		.linear_min_sel = (min_sel),			\
 		.n_voltages = ((max) - (min)) / (step) + 1,	\
 		.min_uV = (min),				\
-		.linear_ranges = volt_ranges,			\
-		.n_linear_ranges = ARRAY_SIZE(volt_ranges),	\
 		.vsel_reg = _vsel_reg,				\
 		.vsel_mask = _vsel_mask,			\
 		.enable_reg = _enable_reg,			\
@@ -171,38 +164,6 @@ struct mt6359_regulator_info {
 	.qi = BIT(0),					\
 }
 
-static const struct linear_range mt_volt_range1[] = {
-	REGULATOR_LINEAR_RANGE(800000, 0, 0x70, 12500),
-};
-
-static const struct linear_range mt_volt_range2[] = {
-	REGULATOR_LINEAR_RANGE(400000, 0, 0x7f, 6250),
-};
-
-static const struct linear_range mt_volt_range3[] = {
-	REGULATOR_LINEAR_RANGE(400000, 0, 0x70, 6250),
-};
-
-static const struct linear_range mt_volt_range4[] = {
-	REGULATOR_LINEAR_RANGE(800000, 0, 0x40, 12500),
-};
-
-static const struct linear_range mt_volt_range5[] = {
-	REGULATOR_LINEAR_RANGE(500000, 0, 0x3F, 50000),
-};
-
-static const struct linear_range mt_volt_range6[] = {
-	REGULATOR_LINEAR_RANGE(500000, 0, 0x7f, 6250),
-};
-
-static const struct linear_range mt_volt_range7[] = {
-	REGULATOR_LINEAR_RANGE(500000, 0, 0x7f, 6250),
-};
-
-static const struct linear_range mt_volt_range8[] = {
-	REGULATOR_LINEAR_RANGE(506250, 0, 0x7f, 6250),
-};
-
 static const unsigned int vsim1_voltages[] = {
 	0, 0, 0, 1700000, 1800000, 0, 0, 0, 2700000, 0, 0, 3000000, 3100000,
 };
@@ -465,9 +426,9 @@ static int mt6359p_vemc_get_voltage_sel(struct regulator_dev *rdev)
 	return val;
 }
 
-static const struct regulator_ops mt6359_volt_range_ops = {
-	.list_voltage = regulator_list_voltage_linear_range,
-	.map_voltage = regulator_map_voltage_linear_range,
+static const struct regulator_ops mt6359_volt_linear_ops = {
+	.list_voltage = regulator_list_voltage_linear,
+	.map_voltage = regulator_map_voltage_linear,
 	.set_voltage_sel = regulator_set_voltage_sel_regmap,
 	.get_voltage_sel = regulator_get_voltage_sel_regmap,
 	.set_voltage_time_sel = regulator_set_voltage_time_sel,
@@ -512,75 +473,75 @@ static const struct regulator_ops mt6359p_vemc_ops = {
 
 /* The array is indexed by id(MT6359_ID_XXX) */
 static struct mt6359_regulator_info mt6359_regulators[] = {
-	MT6359_BUCK("buck_vs1", VS1, 800000, 2200000, 12500, 0,
-		    mt_volt_range1, MT6359_RG_BUCK_VS1_EN_ADDR,
+	MT6359_BUCK("buck_vs1", VS1, 800000, 2200000, 12500,
+		    MT6359_RG_BUCK_VS1_EN_ADDR,
 		    MT6359_DA_VS1_EN_ADDR, MT6359_RG_BUCK_VS1_VOSEL_ADDR,
 		    MT6359_RG_BUCK_VS1_VOSEL_MASK <<
 		    MT6359_RG_BUCK_VS1_VOSEL_SHIFT,
 		    MT6359_RG_BUCK_VS1_LP_ADDR, MT6359_RG_BUCK_VS1_LP_SHIFT,
 		    MT6359_RG_VS1_FPWM_ADDR, MT6359_RG_VS1_FPWM_SHIFT),
-	MT6359_BUCK("buck_vgpu11", VGPU11, 400000, 1193750, 6250, 0,
-		    mt_volt_range2, MT6359_RG_BUCK_VGPU11_EN_ADDR,
+	MT6359_BUCK("buck_vgpu11", VGPU11, 400000, 1193750, 6250,
+		    MT6359_RG_BUCK_VGPU11_EN_ADDR,
 		    MT6359_DA_VGPU11_EN_ADDR, MT6359_RG_BUCK_VGPU11_VOSEL_ADDR,
 		    MT6359_RG_BUCK_VGPU11_VOSEL_MASK <<
 		    MT6359_RG_BUCK_VGPU11_VOSEL_SHIFT,
 		    MT6359_RG_BUCK_VGPU11_LP_ADDR,
 		    MT6359_RG_BUCK_VGPU11_LP_SHIFT,
 		    MT6359_RG_VGPU11_FCCM_ADDR, MT6359_RG_VGPU11_FCCM_SHIFT),
-	MT6359_BUCK("buck_vmodem", VMODEM, 400000, 1100000, 6250, 0,
-		    mt_volt_range3, MT6359_RG_BUCK_VMODEM_EN_ADDR,
+	MT6359_BUCK("buck_vmodem", VMODEM, 400000, 1100000, 6250,
+		    MT6359_RG_BUCK_VMODEM_EN_ADDR,
 		    MT6359_DA_VMODEM_EN_ADDR, MT6359_RG_BUCK_VMODEM_VOSEL_ADDR,
 		    MT6359_RG_BUCK_VMODEM_VOSEL_MASK <<
 		    MT6359_RG_BUCK_VMODEM_VOSEL_SHIFT,
 		    MT6359_RG_BUCK_VMODEM_LP_ADDR,
 		    MT6359_RG_BUCK_VMODEM_LP_SHIFT,
 		    MT6359_RG_VMODEM_FCCM_ADDR, MT6359_RG_VMODEM_FCCM_SHIFT),
-	MT6359_BUCK("buck_vpu", VPU, 400000, 1193750, 6250, 0,
-		    mt_volt_range2, MT6359_RG_BUCK_VPU_EN_ADDR,
+	MT6359_BUCK("buck_vpu", VPU, 400000, 1193750, 6250,
+		    MT6359_RG_BUCK_VPU_EN_ADDR,
 		    MT6359_DA_VPU_EN_ADDR, MT6359_RG_BUCK_VPU_VOSEL_ADDR,
 		    MT6359_RG_BUCK_VPU_VOSEL_MASK <<
 		    MT6359_RG_BUCK_VPU_VOSEL_SHIFT,
 		    MT6359_RG_BUCK_VPU_LP_ADDR, MT6359_RG_BUCK_VPU_LP_SHIFT,
 		    MT6359_RG_VPU_FCCM_ADDR, MT6359_RG_VPU_FCCM_SHIFT),
-	MT6359_BUCK("buck_vcore", VCORE, 400000, 1193750, 6250, 0,
-		    mt_volt_range2, MT6359_RG_BUCK_VCORE_EN_ADDR,
+	MT6359_BUCK("buck_vcore", VCORE, 400000, 1193750, 6250,
+		    MT6359_RG_BUCK_VCORE_EN_ADDR,
 		    MT6359_DA_VCORE_EN_ADDR, MT6359_RG_BUCK_VCORE_VOSEL_ADDR,
 		    MT6359_RG_BUCK_VCORE_VOSEL_MASK <<
 		    MT6359_RG_BUCK_VCORE_VOSEL_SHIFT,
 		    MT6359_RG_BUCK_VCORE_LP_ADDR, MT6359_RG_BUCK_VCORE_LP_SHIFT,
 		    MT6359_RG_VCORE_FCCM_ADDR, MT6359_RG_VCORE_FCCM_SHIFT),
-	MT6359_BUCK("buck_vs2", VS2, 800000, 1600000, 12500, 0,
-		    mt_volt_range4, MT6359_RG_BUCK_VS2_EN_ADDR,
+	MT6359_BUCK("buck_vs2", VS2, 800000, 1600000, 12500,
+		    MT6359_RG_BUCK_VS2_EN_ADDR,
 		    MT6359_DA_VS2_EN_ADDR, MT6359_RG_BUCK_VS2_VOSEL_ADDR,
 		    MT6359_RG_BUCK_VS2_VOSEL_MASK <<
 		    MT6359_RG_BUCK_VS2_VOSEL_SHIFT,
 		    MT6359_RG_BUCK_VS2_LP_ADDR, MT6359_RG_BUCK_VS2_LP_SHIFT,
 		    MT6359_RG_VS2_FPWM_ADDR, MT6359_RG_VS2_FPWM_SHIFT),
-	MT6359_BUCK("buck_vpa", VPA, 500000, 3650000, 50000, 0,
-		    mt_volt_range5, MT6359_RG_BUCK_VPA_EN_ADDR,
+	MT6359_BUCK("buck_vpa", VPA, 500000, 3650000, 50000,
+		    MT6359_RG_BUCK_VPA_EN_ADDR,
 		    MT6359_DA_VPA_EN_ADDR, MT6359_RG_BUCK_VPA_VOSEL_ADDR,
 		    MT6359_RG_BUCK_VPA_VOSEL_MASK <<
 		    MT6359_RG_BUCK_VPA_VOSEL_SHIFT,
 		    MT6359_RG_BUCK_VPA_LP_ADDR, MT6359_RG_BUCK_VPA_LP_SHIFT,
 		    MT6359_RG_VPA_MODESET_ADDR, MT6359_RG_VPA_MODESET_SHIFT),
-	MT6359_BUCK("buck_vproc2", VPROC2, 400000, 1193750, 6250, 0,
-		    mt_volt_range2, MT6359_RG_BUCK_VPROC2_EN_ADDR,
+	MT6359_BUCK("buck_vproc2", VPROC2, 400000, 1193750, 6250,
+		    MT6359_RG_BUCK_VPROC2_EN_ADDR,
 		    MT6359_DA_VPROC2_EN_ADDR, MT6359_RG_BUCK_VPROC2_VOSEL_ADDR,
 		    MT6359_RG_BUCK_VPROC2_VOSEL_MASK <<
 		    MT6359_RG_BUCK_VPROC2_VOSEL_SHIFT,
 		    MT6359_RG_BUCK_VPROC2_LP_ADDR,
 		    MT6359_RG_BUCK_VPROC2_LP_SHIFT,
 		    MT6359_RG_VPROC2_FCCM_ADDR, MT6359_RG_VPROC2_FCCM_SHIFT),
-	MT6359_BUCK("buck_vproc1", VPROC1, 400000, 1193750, 6250, 0,
-		    mt_volt_range2, MT6359_RG_BUCK_VPROC1_EN_ADDR,
+	MT6359_BUCK("buck_vproc1", VPROC1, 400000, 1193750, 6250,
+		    MT6359_RG_BUCK_VPROC1_EN_ADDR,
 		    MT6359_DA_VPROC1_EN_ADDR, MT6359_RG_BUCK_VPROC1_VOSEL_ADDR,
 		    MT6359_RG_BUCK_VPROC1_VOSEL_MASK <<
 		    MT6359_RG_BUCK_VPROC1_VOSEL_SHIFT,
 		    MT6359_RG_BUCK_VPROC1_LP_ADDR,
 		    MT6359_RG_BUCK_VPROC1_LP_SHIFT,
 		    MT6359_RG_VPROC1_FCCM_ADDR, MT6359_RG_VPROC1_FCCM_SHIFT),
-	MT6359_BUCK("buck_vcore_sshub", VCORE_SSHUB, 400000, 1193750, 6250, 0,
-		    mt_volt_range2, MT6359_RG_BUCK_VCORE_SSHUB_EN_ADDR,
+	MT6359_BUCK("buck_vcore_sshub", VCORE_SSHUB, 400000, 1193750, 6250,
+		    MT6359_RG_BUCK_VCORE_SSHUB_EN_ADDR,
 		    MT6359_DA_VCORE_EN_ADDR,
 		    MT6359_RG_BUCK_VCORE_SSHUB_VOSEL_ADDR,
 		    MT6359_RG_BUCK_VCORE_SSHUB_VOSEL_MASK <<
@@ -607,7 +568,7 @@ static struct mt6359_regulator_info mt6359_regulators[] = {
 	MT6359_REG_FIXED("ldo_vusb", VUSB, MT6359_RG_LDO_VUSB_EN_0_ADDR,
 			 MT6359_DA_VUSB_B_EN_ADDR, 3000000),
 	MT6359_LDO_LINEAR("ldo_vsram_proc2", VSRAM_PROC2, 500000, 1293750, 6250,
-			  0, mt_volt_range6, MT6359_RG_LDO_VSRAM_PROC2_EN_ADDR,
+			  MT6359_RG_LDO_VSRAM_PROC2_EN_ADDR,
 			  MT6359_DA_VSRAM_PROC2_B_EN_ADDR,
 			  MT6359_RG_LDO_VSRAM_PROC2_VOSEL_ADDR,
 			  MT6359_RG_LDO_VSRAM_PROC2_VOSEL_MASK <<
@@ -646,7 +607,7 @@ static struct mt6359_regulator_info mt6359_regulators[] = {
 	MT6359_REG_FIXED("ldo_vaux18", VAUX18, MT6359_RG_LDO_VAUX18_EN_ADDR,
 			 MT6359_DA_VAUX18_B_EN_ADDR, 1800000),
 	MT6359_LDO_LINEAR("ldo_vsram_others", VSRAM_OTHERS, 500000, 1293750,
-			  6250, 0, mt_volt_range6,
+			  6250,
 			  MT6359_RG_LDO_VSRAM_OTHERS_EN_ADDR,
 			  MT6359_DA_VSRAM_OTHERS_B_EN_ADDR,
 			  MT6359_RG_LDO_VSRAM_OTHERS_VOSEL_ADDR,
@@ -707,7 +668,7 @@ static struct mt6359_regulator_info mt6359_regulators[] = {
 		   MT6359_RG_VRF18_VOSEL_MASK << MT6359_RG_VRF18_VOSEL_SHIFT,
 		   120),
 	MT6359_LDO_LINEAR("ldo_vsram_md", VSRAM_MD, 500000, 1100000, 6250,
-			  0, mt_volt_range7, MT6359_RG_LDO_VSRAM_MD_EN_ADDR,
+			  MT6359_RG_LDO_VSRAM_MD_EN_ADDR,
 			  MT6359_DA_VSRAM_MD_B_EN_ADDR,
 			  MT6359_RG_LDO_VSRAM_MD_VOSEL_ADDR,
 			  MT6359_RG_LDO_VSRAM_MD_VOSEL_MASK <<
@@ -728,7 +689,7 @@ static struct mt6359_regulator_info mt6359_regulators[] = {
 		   MT6359_RG_VBBCK_VOSEL_MASK << MT6359_RG_VBBCK_VOSEL_SHIFT,
 		   240),
 	MT6359_LDO_LINEAR("ldo_vsram_proc1", VSRAM_PROC1, 500000, 1293750, 6250,
-			  0, mt_volt_range6, MT6359_RG_LDO_VSRAM_PROC1_EN_ADDR,
+			  MT6359_RG_LDO_VSRAM_PROC1_EN_ADDR,
 			  MT6359_DA_VSRAM_PROC1_B_EN_ADDR,
 			  MT6359_RG_LDO_VSRAM_PROC1_VOSEL_ADDR,
 			  MT6359_RG_LDO_VSRAM_PROC1_VOSEL_MASK <<
@@ -739,7 +700,7 @@ static struct mt6359_regulator_info mt6359_regulators[] = {
 		   MT6359_RG_VSIM2_VOSEL_MASK << MT6359_RG_VSIM2_VOSEL_SHIFT,
 		   480),
 	MT6359_LDO_LINEAR("ldo_vsram_others_sshub", VSRAM_OTHERS_SSHUB,
-			  500000, 1293750, 6250, 0, mt_volt_range6,
+			  500000, 1293750, 6250,
 			  MT6359_RG_LDO_VSRAM_OTHERS_SSHUB_EN_ADDR,
 			  MT6359_DA_VSRAM_OTHERS_B_EN_ADDR,
 			  MT6359_RG_LDO_VSRAM_OTHERS_SSHUB_VOSEL_ADDR,
@@ -748,75 +709,75 @@ static struct mt6359_regulator_info mt6359_regulators[] = {
 };
 
 static struct mt6359_regulator_info mt6359p_regulators[] = {
-	MT6359_BUCK("buck_vs1", VS1, 800000, 2200000, 12500, 0,
-		    mt_volt_range1, MT6359_RG_BUCK_VS1_EN_ADDR,
+	MT6359_BUCK("buck_vs1", VS1, 800000, 2200000, 12500,
+		    MT6359_RG_BUCK_VS1_EN_ADDR,
 		    MT6359_DA_VS1_EN_ADDR, MT6359_RG_BUCK_VS1_VOSEL_ADDR,
 		    MT6359_RG_BUCK_VS1_VOSEL_MASK <<
 		    MT6359_RG_BUCK_VS1_VOSEL_SHIFT,
 		    MT6359_RG_BUCK_VS1_LP_ADDR, MT6359_RG_BUCK_VS1_LP_SHIFT,
 		    MT6359_RG_VS1_FPWM_ADDR, MT6359_RG_VS1_FPWM_SHIFT),
-	MT6359_BUCK("buck_vgpu11", VGPU11, 400000, 1193750, 6250, 0,
-		    mt_volt_range2, MT6359_RG_BUCK_VGPU11_EN_ADDR,
+	MT6359_BUCK("buck_vgpu11", VGPU11, 400000, 1193750, 6250,
+		    MT6359_RG_BUCK_VGPU11_EN_ADDR,
 		    MT6359_DA_VGPU11_EN_ADDR, MT6359P_RG_BUCK_VGPU11_VOSEL_ADDR,
 		    MT6359_RG_BUCK_VGPU11_VOSEL_MASK <<
 		    MT6359_RG_BUCK_VGPU11_VOSEL_SHIFT,
 		    MT6359_RG_BUCK_VGPU11_LP_ADDR,
 		    MT6359_RG_BUCK_VGPU11_LP_SHIFT,
 		    MT6359_RG_VGPU11_FCCM_ADDR, MT6359_RG_VGPU11_FCCM_SHIFT),
-	MT6359_BUCK("buck_vmodem", VMODEM, 400000, 1100000, 6250, 0,
-		    mt_volt_range3, MT6359_RG_BUCK_VMODEM_EN_ADDR,
+	MT6359_BUCK("buck_vmodem", VMODEM, 400000, 1100000, 6250,
+		    MT6359_RG_BUCK_VMODEM_EN_ADDR,
 		    MT6359_DA_VMODEM_EN_ADDR, MT6359_RG_BUCK_VMODEM_VOSEL_ADDR,
 		    MT6359_RG_BUCK_VMODEM_VOSEL_MASK <<
 		    MT6359_RG_BUCK_VMODEM_VOSEL_SHIFT,
 		    MT6359_RG_BUCK_VMODEM_LP_ADDR,
 		    MT6359_RG_BUCK_VMODEM_LP_SHIFT,
 		    MT6359_RG_VMODEM_FCCM_ADDR, MT6359_RG_VMODEM_FCCM_SHIFT),
-	MT6359_BUCK("buck_vpu", VPU, 400000, 1193750, 6250, 0,
-		    mt_volt_range2, MT6359_RG_BUCK_VPU_EN_ADDR,
+	MT6359_BUCK("buck_vpu", VPU, 400000, 1193750, 6250,
+		    MT6359_RG_BUCK_VPU_EN_ADDR,
 		    MT6359_DA_VPU_EN_ADDR, MT6359_RG_BUCK_VPU_VOSEL_ADDR,
 		    MT6359_RG_BUCK_VPU_VOSEL_MASK <<
 		    MT6359_RG_BUCK_VPU_VOSEL_SHIFT,
 		    MT6359_RG_BUCK_VPU_LP_ADDR, MT6359_RG_BUCK_VPU_LP_SHIFT,
 		    MT6359_RG_VPU_FCCM_ADDR, MT6359_RG_VPU_FCCM_SHIFT),
-	MT6359_BUCK("buck_vcore", VCORE, 506250, 1300000, 6250, 0,
-		    mt_volt_range8, MT6359_RG_BUCK_VCORE_EN_ADDR,
+	MT6359_BUCK("buck_vcore", VCORE, 506250, 1300000, 6250,
+		    MT6359_RG_BUCK_VCORE_EN_ADDR,
 		    MT6359_DA_VCORE_EN_ADDR, MT6359P_RG_BUCK_VCORE_VOSEL_ADDR,
 		    MT6359_RG_BUCK_VCORE_VOSEL_MASK <<
 		    MT6359_RG_BUCK_VCORE_VOSEL_SHIFT,
 		    MT6359_RG_BUCK_VCORE_LP_ADDR, MT6359_RG_BUCK_VCORE_LP_SHIFT,
 		    MT6359_RG_VCORE_FCCM_ADDR, MT6359_RG_VCORE_FCCM_SHIFT),
-	MT6359_BUCK("buck_vs2", VS2, 800000, 1600000, 12500, 0,
-		    mt_volt_range4, MT6359_RG_BUCK_VS2_EN_ADDR,
+	MT6359_BUCK("buck_vs2", VS2, 800000, 1600000, 12500,
+		    MT6359_RG_BUCK_VS2_EN_ADDR,
 		    MT6359_DA_VS2_EN_ADDR, MT6359_RG_BUCK_VS2_VOSEL_ADDR,
 		    MT6359_RG_BUCK_VS2_VOSEL_MASK <<
 		    MT6359_RG_BUCK_VS2_VOSEL_SHIFT,
 		    MT6359_RG_BUCK_VS2_LP_ADDR, MT6359_RG_BUCK_VS2_LP_SHIFT,
 		    MT6359_RG_VS2_FPWM_ADDR, MT6359_RG_VS2_FPWM_SHIFT),
-	MT6359_BUCK("buck_vpa", VPA, 500000, 3650000, 50000, 0,
-		    mt_volt_range5, MT6359_RG_BUCK_VPA_EN_ADDR,
+	MT6359_BUCK("buck_vpa", VPA, 500000, 3650000, 50000,
+		    MT6359_RG_BUCK_VPA_EN_ADDR,
 		    MT6359_DA_VPA_EN_ADDR, MT6359_RG_BUCK_VPA_VOSEL_ADDR,
 		    MT6359_RG_BUCK_VPA_VOSEL_MASK <<
 		    MT6359_RG_BUCK_VPA_VOSEL_SHIFT,
 		    MT6359_RG_BUCK_VPA_LP_ADDR, MT6359_RG_BUCK_VPA_LP_SHIFT,
 		    MT6359_RG_VPA_MODESET_ADDR, MT6359_RG_VPA_MODESET_SHIFT),
-	MT6359_BUCK("buck_vproc2", VPROC2, 400000, 1193750, 6250, 0,
-		    mt_volt_range2, MT6359_RG_BUCK_VPROC2_EN_ADDR,
+	MT6359_BUCK("buck_vproc2", VPROC2, 400000, 1193750, 6250,
+		    MT6359_RG_BUCK_VPROC2_EN_ADDR,
 		    MT6359_DA_VPROC2_EN_ADDR, MT6359_RG_BUCK_VPROC2_VOSEL_ADDR,
 		    MT6359_RG_BUCK_VPROC2_VOSEL_MASK <<
 		    MT6359_RG_BUCK_VPROC2_VOSEL_SHIFT,
 		    MT6359_RG_BUCK_VPROC2_LP_ADDR,
 		    MT6359_RG_BUCK_VPROC2_LP_SHIFT,
 		    MT6359_RG_VPROC2_FCCM_ADDR, MT6359_RG_VPROC2_FCCM_SHIFT),
-	MT6359_BUCK("buck_vproc1", VPROC1, 400000, 1193750, 6250, 0,
-		    mt_volt_range2, MT6359_RG_BUCK_VPROC1_EN_ADDR,
+	MT6359_BUCK("buck_vproc1", VPROC1, 400000, 1193750, 6250,
+		    MT6359_RG_BUCK_VPROC1_EN_ADDR,
 		    MT6359_DA_VPROC1_EN_ADDR, MT6359_RG_BUCK_VPROC1_VOSEL_ADDR,
 		    MT6359_RG_BUCK_VPROC1_VOSEL_MASK <<
 		    MT6359_RG_BUCK_VPROC1_VOSEL_SHIFT,
 		    MT6359_RG_BUCK_VPROC1_LP_ADDR,
 		    MT6359_RG_BUCK_VPROC1_LP_SHIFT,
 		    MT6359_RG_VPROC1_FCCM_ADDR, MT6359_RG_VPROC1_FCCM_SHIFT),
-	MT6359_BUCK("buck_vgpu11_sshub", VGPU11_SSHUB, 400000, 1193750, 6250, 0,
-		    mt_volt_range2, MT6359P_RG_BUCK_VGPU11_SSHUB_EN_ADDR,
+	MT6359_BUCK("buck_vgpu11_sshub", VGPU11_SSHUB, 400000, 1193750, 6250,
+		    MT6359P_RG_BUCK_VGPU11_SSHUB_EN_ADDR,
 		    MT6359_DA_VGPU11_EN_ADDR,
 		    MT6359P_RG_BUCK_VGPU11_SSHUB_VOSEL_ADDR,
 		    MT6359P_RG_BUCK_VGPU11_SSHUB_VOSEL_MASK <<
@@ -844,7 +805,7 @@ static struct mt6359_regulator_info mt6359p_regulators[] = {
 	MT6359_REG_FIXED("ldo_vusb", VUSB, MT6359P_RG_LDO_VUSB_EN_0_ADDR,
 			 MT6359P_DA_VUSB_B_EN_ADDR, 3000000),
 	MT6359_LDO_LINEAR("ldo_vsram_proc2", VSRAM_PROC2, 500000, 1293750, 6250,
-			  0, mt_volt_range6, MT6359P_RG_LDO_VSRAM_PROC2_EN_ADDR,
+			  MT6359P_RG_LDO_VSRAM_PROC2_EN_ADDR,
 			  MT6359P_DA_VSRAM_PROC2_B_EN_ADDR,
 			  MT6359P_RG_LDO_VSRAM_PROC2_VOSEL_ADDR,
 			  MT6359_RG_LDO_VSRAM_PROC2_VOSEL_MASK <<
@@ -884,7 +845,7 @@ static struct mt6359_regulator_info mt6359p_regulators[] = {
 	MT6359_REG_FIXED("ldo_vaux18", VAUX18, MT6359P_RG_LDO_VAUX18_EN_ADDR,
 			 MT6359P_DA_VAUX18_B_EN_ADDR, 1800000),
 	MT6359_LDO_LINEAR("ldo_vsram_others", VSRAM_OTHERS, 500000, 1293750,
-			  6250, 0, mt_volt_range6,
+			  6250,
 			  MT6359P_RG_LDO_VSRAM_OTHERS_EN_ADDR,
 			  MT6359P_DA_VSRAM_OTHERS_B_EN_ADDR,
 			  MT6359P_RG_LDO_VSRAM_OTHERS_VOSEL_ADDR,
@@ -947,7 +908,7 @@ static struct mt6359_regulator_info mt6359p_regulators[] = {
 		   MT6359_RG_VRF18_VOSEL_MASK << MT6359_RG_VRF18_VOSEL_SHIFT,
 		   240),
 	MT6359_LDO_LINEAR("ldo_vsram_md", VSRAM_MD, 500000, 1293750, 6250,
-			  0, mt_volt_range7, MT6359P_RG_LDO_VSRAM_MD_EN_ADDR,
+			  MT6359P_RG_LDO_VSRAM_MD_EN_ADDR,
 			  MT6359P_DA_VSRAM_MD_B_EN_ADDR,
 			  MT6359P_RG_LDO_VSRAM_MD_VOSEL_ADDR,
 			  MT6359_RG_LDO_VSRAM_MD_VOSEL_MASK <<
@@ -968,7 +929,7 @@ static struct mt6359_regulator_info mt6359p_regulators[] = {
 		   MT6359P_RG_VBBCK_VOSEL_MASK << MT6359P_RG_VBBCK_VOSEL_SHIFT,
 		   480),
 	MT6359_LDO_LINEAR("ldo_vsram_proc1", VSRAM_PROC1, 500000, 1293750, 6250,
-			  0, mt_volt_range6, MT6359P_RG_LDO_VSRAM_PROC1_EN_ADDR,
+			  MT6359P_RG_LDO_VSRAM_PROC1_EN_ADDR,
 			  MT6359P_DA_VSRAM_PROC1_B_EN_ADDR,
 			  MT6359P_RG_LDO_VSRAM_PROC1_VOSEL_ADDR,
 			  MT6359_RG_LDO_VSRAM_PROC1_VOSEL_MASK <<
@@ -979,7 +940,7 @@ static struct mt6359_regulator_info mt6359p_regulators[] = {
 		   MT6359_RG_VSIM2_VOSEL_MASK << MT6359_RG_VSIM2_VOSEL_SHIFT,
 		   480),
 	MT6359_LDO_LINEAR("ldo_vsram_others_sshub", VSRAM_OTHERS_SSHUB,
-			  500000, 1293750, 6250, 0, mt_volt_range6,
+			  500000, 1293750, 6250,
 			  MT6359P_RG_LDO_VSRAM_OTHERS_SSHUB_EN_ADDR,
 			  MT6359P_DA_VSRAM_OTHERS_B_EN_ADDR,
 			  MT6359P_RG_LDO_VSRAM_OTHERS_SSHUB_VOSEL_ADDR,
-- 
cgit v1.2.3-59-g8ed1b


From ba6622c43381e7045f8bc5438089ae53054fdf83 Mon Sep 17 00:00:00 2001
From: Axel Lin <axel.lin@ingics.com>
Date: Fri, 4 Jun 2021 19:58:03 +0800
Subject: regulator: ltc3589: Convert to use regulator_set_ramp_delay_regmap

Use regulator_set_ramp_delay_regmap instead of open-coded

LTC3589_LINEAR_REG() no longer call LTC3589_REG() now.
Only LTC3589_LINEAR_REG() needs to set go_bit, thus remove go_bit
parameter from LTC3589_REG() macro.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Link: https://lore.kernel.org/r/20210604115803.1260976-1-axel.lin@ingics.com
Signed-off-by: Mark Brown <broonie@kernel.org>
---
 drivers/regulator/ltc3589.c | 73 +++++++++++++++++++++++----------------------
 1 file changed, 38 insertions(+), 35 deletions(-)

(limited to 'drivers/regulator')

diff --git a/drivers/regulator/ltc3589.c b/drivers/regulator/ltc3589.c
index 38f7ccb63b52..5e0b669c3a01 100644
--- a/drivers/regulator/ltc3589.c
+++ b/drivers/regulator/ltc3589.c
@@ -54,6 +54,11 @@
 #define LTC3589_VCCR_SW3_GO		BIT(4)
 #define LTC3589_VCCR_LDO2_GO		BIT(6)
 
+#define LTC3589_VRRCR_SW1_RAMP_MASK	GENMASK(1, 0)
+#define LTC3589_VRRCR_SW2_RAMP_MASK	GENMASK(3, 2)
+#define LTC3589_VRRCR_SW3_RAMP_MASK	GENMASK(5, 4)
+#define LTC3589_VRRCR_LDO2_RAMP_MASK	GENMASK(7, 6)
+
 enum ltc3589_variant {
 	LTC3589,
 	LTC3589_1,
@@ -88,27 +93,9 @@ static const int ltc3589_12_ldo4[] = {
 	1200000, 1800000, 2500000, 3200000,
 };
 
-static int ltc3589_set_ramp_delay(struct regulator_dev *rdev, int ramp_delay)
-{
-	struct ltc3589 *ltc3589 = rdev_get_drvdata(rdev);
-	int sel, shift;
-
-	if (unlikely(ramp_delay <= 0))
-		return -EINVAL;
-
-	/* VRRCR slew rate offsets are the same as VCCR go bit offsets */
-	shift = ffs(rdev->desc->apply_bit) - 1;
-
-	/* The slew rate can be set to 0.88, 1.75, 3.5, or 7 mV/uS */
-	for (sel = 0; sel < 4; sel++) {
-		if ((880 << sel) >= ramp_delay) {
-			return regmap_update_bits(ltc3589->regmap,
-						  LTC3589_VRRCR,
-						  0x3 << shift, sel << shift);
-		}
-	}
-	return -EINVAL;
-}
+static const unsigned int ltc3589_ramp_table[] = {
+	880, 1750, 3500, 7000
+};
 
 static int ltc3589_set_suspend_voltage(struct regulator_dev *rdev, int uV)
 {
@@ -149,7 +136,7 @@ static const struct regulator_ops ltc3589_linear_regulator_ops = {
 	.list_voltage = regulator_list_voltage_linear,
 	.set_voltage_sel = regulator_set_voltage_sel_regmap,
 	.get_voltage_sel = regulator_get_voltage_sel_regmap,
-	.set_ramp_delay = ltc3589_set_ramp_delay,
+	.set_ramp_delay = regulator_set_ramp_delay_regmap,
 	.set_voltage_time_sel = regulator_set_voltage_time_sel,
 	.set_suspend_voltage = ltc3589_set_suspend_voltage,
 	.set_suspend_mode = ltc3589_set_suspend_mode,
@@ -218,16 +205,13 @@ static int ltc3589_of_parse_cb(struct device_node *np,
 	return 0;
 }
 
-#define LTC3589_REG(_name, _of_name, _ops, en_bit, dtv1_reg, dtv_mask, go_bit)\
+#define LTC3589_REG(_name, _of_name, _ops, en_bit, dtv1_reg, dtv_mask)	\
 	[LTC3589_ ## _name] = {						\
 		.name = #_name,						\
 		.of_match = of_match_ptr(#_of_name),			\
 		.regulators_node = of_match_ptr("regulators"),		\
 		.of_parse_cb = ltc3589_of_parse_cb,			\
 		.n_voltages = (dtv_mask) + 1,				\
-		.min_uV = (go_bit) ? 362500 : 0,			\
-		.uV_step = (go_bit) ? 12500 : 0,			\
-		.ramp_delay = (go_bit) ? 1750 : 0,			\
 		.fixed_uV = (dtv_mask) ? 0 : 800000,			\
 		.ops = &ltc3589_ ## _ops ## _regulator_ops,		\
 		.type = REGULATOR_VOLTAGE,				\
@@ -235,30 +219,49 @@ static int ltc3589_of_parse_cb(struct device_node *np,
 		.owner = THIS_MODULE,					\
 		.vsel_reg = (dtv1_reg),					\
 		.vsel_mask = (dtv_mask),				\
-		.apply_reg = (go_bit) ? LTC3589_VCCR : 0,		\
-		.apply_bit = (go_bit),					\
 		.enable_reg = (en_bit) ? LTC3589_OVEN : 0,		\
 		.enable_mask = (en_bit),				\
 	}
 
 #define LTC3589_LINEAR_REG(_name, _of_name, _dtv1)			\
-	LTC3589_REG(_name, _of_name, linear, LTC3589_OVEN_ ## _name,	\
-		    LTC3589_ ## _dtv1, 0x1f,				\
-		    LTC3589_VCCR_ ## _name ## _GO)
+	[LTC3589_ ## _name] = {						\
+		.name = #_name,						\
+		.of_match = of_match_ptr(#_of_name),			\
+		.regulators_node = of_match_ptr("regulators"),		\
+		.of_parse_cb = ltc3589_of_parse_cb,			\
+		.n_voltages = 32,					\
+		.min_uV = 362500,					\
+		.uV_step = 12500,					\
+		.ramp_delay = 1750,					\
+		.ops = &ltc3589_linear_regulator_ops,			\
+		.type = REGULATOR_VOLTAGE,				\
+		.id = LTC3589_ ## _name,				\
+		.owner = THIS_MODULE,					\
+		.vsel_reg = LTC3589_ ## _dtv1,				\
+		.vsel_mask = 0x1f,					\
+		.apply_reg = LTC3589_VCCR,				\
+		.apply_bit = LTC3589_VCCR_ ## _name ## _GO,		\
+		.enable_reg = LTC3589_OVEN,				\
+		.enable_mask = (LTC3589_OVEN_ ## _name),		\
+		.ramp_reg = LTC3589_VRRCR,				\
+		.ramp_mask = LTC3589_VRRCR_ ## _name ## _RAMP_MASK,	\
+		.ramp_delay_table = ltc3589_ramp_table,			\
+		.n_ramp_values = ARRAY_SIZE(ltc3589_ramp_table),	\
+	}
+
 
 #define LTC3589_FIXED_REG(_name, _of_name)				\
-	LTC3589_REG(_name, _of_name, fixed, LTC3589_OVEN_ ## _name, 0, 0, 0)
+	LTC3589_REG(_name, _of_name, fixed, LTC3589_OVEN_ ## _name, 0, 0)
 
 static const struct regulator_desc ltc3589_regulators[] = {
 	LTC3589_LINEAR_REG(SW1, sw1, B1DTV1),
 	LTC3589_LINEAR_REG(SW2, sw2, B2DTV1),
 	LTC3589_LINEAR_REG(SW3, sw3, B3DTV1),
 	LTC3589_FIXED_REG(BB_OUT, bb-out),
-	LTC3589_REG(LDO1, ldo1, fixed_standby, 0, 0, 0, 0),
+	LTC3589_REG(LDO1, ldo1, fixed_standby, 0, 0, 0),
 	LTC3589_LINEAR_REG(LDO2, ldo2, L2DTV1),
 	LTC3589_FIXED_REG(LDO3, ldo3),
-	LTC3589_REG(LDO4, ldo4, table, LTC3589_OVEN_LDO4, LTC3589_L2DTV2,
-		    0x60, 0),
+	LTC3589_REG(LDO4, ldo4, table, LTC3589_OVEN_LDO4, LTC3589_L2DTV2, 0x60),
 };
 
 static bool ltc3589_writeable_reg(struct device *dev, unsigned int reg)
-- 
cgit v1.2.3-59-g8ed1b


From 0ea461b4f229739345870a086aa4647a16ff42ff Mon Sep 17 00:00:00 2001
From: Axel Lin <axel.lin@ingics.com>
Date: Mon, 7 Jun 2021 22:30:02 +0800
Subject: regulator: bd71815: Get rid of struct bd71815_pmic

The content of bd71815_regulators is never changed, no need to duplicate
it, thus remove descs[BD71815_REGULATOR_CNT].
The *regmap, *dev and *rdev[BD71815_REGULATOR_CNT] are not really needed.
The *gps is unused.

Thus the struct bd71815_pmic can be removed.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Reviewed-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Link: https://lore.kernel.org/r/20210607143002.1600017-1-axel.lin@ingics.com
Signed-off-by: Mark Brown <broonie@kernel.org>
---
 drivers/regulator/bd71815-regulator.c | 57 ++++++++++++-----------------------
 1 file changed, 19 insertions(+), 38 deletions(-)

(limited to 'drivers/regulator')

diff --git a/drivers/regulator/bd71815-regulator.c b/drivers/regulator/bd71815-regulator.c
index 4dd21ac24ddf..16edd9062ca9 100644
--- a/drivers/regulator/bd71815-regulator.c
+++ b/drivers/regulator/bd71815-regulator.c
@@ -28,14 +28,6 @@ struct bd71815_regulator {
 	const struct rohm_dvs_config *dvs;
 };
 
-struct bd71815_pmic {
-	struct bd71815_regulator descs[BD71815_REGULATOR_CNT];
-	struct regmap *regmap;
-	struct device *dev;
-	struct gpio_descs *gps;
-	struct regulator_dev *rdev[BD71815_REGULATOR_CNT];
-};
-
 static const int bd7181x_wled_currents[] = {
 	10, 20, 30, 50, 70, 100, 200, 300, 500, 700, 1000, 2000, 3000, 4000,
 	5000, 6000, 7000, 8000, 9000, 10000, 11000, 12000, 13000, 14000, 15000,
@@ -302,14 +294,13 @@ static int bd7181x_led_set_current_limit(struct regulator_dev *rdev,
 
 static int bd7181x_buck12_get_voltage_sel(struct regulator_dev *rdev)
 {
-	struct bd71815_pmic *pmic = rdev_get_drvdata(rdev);
 	int rid = rdev_get_id(rdev);
 	int ret, regh, regl, val;
 
 	regh = BD71815_REG_BUCK1_VOLT_H + rid * 0x2;
 	regl = BD71815_REG_BUCK1_VOLT_L + rid * 0x2;
 
-	ret = regmap_read(pmic->regmap, regh, &val);
+	ret = regmap_read(rdev->regmap, regh, &val);
 	if (ret)
 		return ret;
 
@@ -321,7 +312,7 @@ static int bd7181x_buck12_get_voltage_sel(struct regulator_dev *rdev)
 	 * by BD71815_BUCK_DVSSEL bit
 	 */
 	if ((!(val & BD71815_BUCK_STBY_DVS)) && (!(val & BD71815_BUCK_DVSSEL)))
-		ret = regmap_read(pmic->regmap, regl, &val);
+		ret = regmap_read(rdev->regmap, regl, &val);
 
 	if (ret)
 		return ret;
@@ -335,14 +326,13 @@ static int bd7181x_buck12_get_voltage_sel(struct regulator_dev *rdev)
 static int bd7181x_buck12_set_voltage_sel(struct regulator_dev *rdev,
 					  unsigned int sel)
 {
-	struct bd71815_pmic *pmic = rdev_get_drvdata(rdev);
 	int rid = rdev_get_id(rdev);
 	int ret, val, reg, regh, regl;
 
 	regh = BD71815_REG_BUCK1_VOLT_H + rid*0x2;
 	regl = BD71815_REG_BUCK1_VOLT_L + rid*0x2;
 
-	ret = regmap_read(pmic->regmap, regh, &val);
+	ret = regmap_read(rdev->regmap, regh, &val);
 	if (ret)
 		return ret;
 
@@ -352,7 +342,7 @@ static int bd7181x_buck12_set_voltage_sel(struct regulator_dev *rdev,
 	 * voltages at runtime is not supported by this driver.
 	 */
 	if (((val & BD71815_BUCK_STBY_DVS))) {
-		return regmap_update_bits(pmic->regmap, regh, BD71815_VOLT_MASK,
+		return regmap_update_bits(rdev->regmap, regh, BD71815_VOLT_MASK,
 					  sel);
 	}
 	/* Update new voltage to the register which is not selected now */
@@ -361,12 +351,13 @@ static int bd7181x_buck12_set_voltage_sel(struct regulator_dev *rdev,
 	else
 		reg = regh;
 
-	ret = regmap_update_bits(pmic->regmap, reg, BD71815_VOLT_MASK, sel);
+	ret = regmap_update_bits(rdev->regmap, reg, BD71815_VOLT_MASK, sel);
 	if (ret)
 		return ret;
 
 	/* Select the other DVS register to be used */
-	return regmap_update_bits(pmic->regmap, regh, BD71815_BUCK_DVSSEL, ~val);
+	return regmap_update_bits(rdev->regmap, regh, BD71815_BUCK_DVSSEL,
+				  ~val);
 }
 
 static const struct regulator_ops bd7181x_ldo_regulator_ops = {
@@ -524,7 +515,7 @@ static const struct regulator_ops bd7181x_led_regulator_ops = {
 		.dvs = (_dvs),						\
 	}
 
-static struct bd71815_regulator bd71815_regulators[] = {
+static const struct bd71815_regulator bd71815_regulators[] = {
 	BD71815_BUCK12_REG(buck1, BD71815_BUCK1, BD71815_REG_BUCK1_VOLT_H,
 			   BD71815_REG_BUCK1_MODE, 800000, 2000000, 25000,
 			   &buck1_dvs),
@@ -570,24 +561,16 @@ static struct bd71815_regulator bd71815_regulators[] = {
 
 static int bd7181x_probe(struct platform_device *pdev)
 {
-	struct bd71815_pmic *pmic;
 	struct regulator_config config = {};
 	int i, ret;
 	struct gpio_desc *ldo4_en;
+	struct regmap *regmap;
 
-	pmic = devm_kzalloc(&pdev->dev, sizeof(*pmic), GFP_KERNEL);
-	if (!pmic)
-		return -ENOMEM;
-
-	memcpy(pmic->descs, bd71815_regulators,	sizeof(pmic->descs));
-
-	pmic->dev = &pdev->dev;
-	pmic->regmap = dev_get_regmap(pdev->dev.parent, NULL);
-	if (!pmic->regmap) {
-		dev_err(pmic->dev, "No parent regmap\n");
+	regmap = dev_get_regmap(pdev->dev.parent, NULL);
+	if (!regmap) {
+		dev_err(&pdev->dev, "No parent regmap\n");
 		return -ENODEV;
 	}
-	platform_set_drvdata(pdev, pmic);
 	ldo4_en = devm_gpiod_get_from_of_node(&pdev->dev,
 					      pdev->dev.parent->of_node,
 						 "rohm,vsel-gpios", 0,
@@ -601,23 +584,23 @@ static int bd7181x_probe(struct platform_device *pdev)
 	}
 
 	/* Disable to go to ship-mode */
-	ret = regmap_update_bits(pmic->regmap, BD71815_REG_PWRCTRL,
-				 RESTARTEN, 0);
+	ret = regmap_update_bits(regmap, BD71815_REG_PWRCTRL, RESTARTEN, 0);
 	if (ret)
 		return ret;
 
 	config.dev = pdev->dev.parent;
-	config.regmap = pmic->regmap;
+	config.regmap = regmap;
 
 	for (i = 0; i < BD71815_REGULATOR_CNT; i++) {
-		struct regulator_desc *desc;
+		const struct regulator_desc *desc;
 		struct regulator_dev *rdev;
 
-		desc = &pmic->descs[i].desc;
+		desc = &bd71815_regulators[i].desc;
+
 		if (i == BD71815_LDO4)
 			config.ena_gpiod = ldo4_en;
-
-		config.driver_data = pmic;
+		else
+			config.ena_gpiod = NULL;
 
 		rdev = devm_regulator_register(&pdev->dev, desc, &config);
 		if (IS_ERR(rdev)) {
@@ -626,8 +609,6 @@ static int bd7181x_probe(struct platform_device *pdev)
 				desc->name);
 			return PTR_ERR(rdev);
 		}
-		config.ena_gpiod = NULL;
-		pmic->rdev[i] = rdev;
 	}
 	return 0;
 }
-- 
cgit v1.2.3-59-g8ed1b


From 2e11737a772b95c6587df73f216eec1762431432 Mon Sep 17 00:00:00 2001
From: Axel Lin <axel.lin@ingics.com>
Date: Mon, 7 Jun 2021 22:29:07 +0800
Subject: regulator: fan53880: Fix vsel_mask setting for FAN53880_BUCK
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

According to the datasheet:
REGISTER DETAILS − 0x02 BUCK, BUCK_OUT is BIT0 ~ BIT7.

So vsel_mask for FAN53880_BUCK should be 0xFF.

Fixes: e6dea51e2d41 ("regulator: fan53880: Add initial support")
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Link: https://lore.kernel.org/r/20210607142907.1599905-1-axel.lin@ingics.com
Signed-off-by: Mark Brown <broonie@kernel.org>
---
 drivers/regulator/fan53880.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/regulator')

diff --git a/drivers/regulator/fan53880.c b/drivers/regulator/fan53880.c
index d49f10ac222d..d7e34e9188c7 100644
--- a/drivers/regulator/fan53880.c
+++ b/drivers/regulator/fan53880.c
@@ -77,7 +77,7 @@ static const struct regulator_desc fan53880_regulators[] = {
 		},
 		.n_linear_ranges = 2,
 		.vsel_reg =	   FAN53880_BUCKVOUT,
-		.vsel_mask =	   0x7f,
+		.vsel_mask =	   0xff,
 		.enable_reg =	   FAN53880_ENABLE,
 		.enable_mask =	   0x10,
 		.enable_time =	   480,
-- 
cgit v1.2.3-59-g8ed1b


From b113ec2d8562f5f3e0359c547cba53686ee805e9 Mon Sep 17 00:00:00 2001
From: Axel Lin <axel.lin@ingics.com>
Date: Thu, 3 Jun 2021 17:38:09 +0800
Subject: regulator: rt6160: Convert to use regulator_set_ramp_delay_regmap

Use regulator_set_ramp_delay_regmap instead of open-coded.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Link: https://lore.kernel.org/r/20210603093809.1108629-1-axel.lin@ingics.com
Signed-off-by: Mark Brown <broonie@kernel.org>
---
 drivers/regulator/rt6160-regulator.c | 35 +++++++++--------------------------
 1 file changed, 9 insertions(+), 26 deletions(-)

(limited to 'drivers/regulator')

diff --git a/drivers/regulator/rt6160-regulator.c b/drivers/regulator/rt6160-regulator.c
index 4588ae0748a5..69550284083d 100644
--- a/drivers/regulator/rt6160-regulator.c
+++ b/drivers/regulator/rt6160-regulator.c
@@ -46,6 +46,10 @@ struct rt6160_priv {
 	bool enable_state;
 };
 
+static const unsigned int rt6160_ramp_tables[] = {
+	1000, 2500, 5000, 10000
+};
+
 static int rt6160_enable(struct regulator_dev *rdev)
 {
 	struct rt6160_priv *priv = rdev_get_drvdata(rdev);
@@ -140,31 +144,6 @@ static int rt6160_set_suspend_voltage(struct regulator_dev *rdev, int uV)
 	return regmap_update_bits(regmap, reg, RT6160_VSEL_MASK, vsel);
 }
 
-static int rt6160_set_ramp_delay(struct regulator_dev *rdev, int target)
-{
-	struct regmap *regmap = rdev_get_regmap(rdev);
-	const int ramp_tables[] = { 1000, 2500, 5000, 10000 };
-	unsigned int i, sel;
-
-	/* Find closest larger or equal */
-	for (i = 0; i < ARRAY_SIZE(ramp_tables); i++) {
-		sel = i;
-
-		/* If ramp delay is equal to 0, directly set ramp speed to fastest */
-		if (target == 0) {
-			sel = ARRAY_SIZE(ramp_tables) - 1;
-			break;
-		}
-
-		if (target <= ramp_tables[i])
-			break;
-	}
-
-	sel <<= ffs(RT6160_RAMPRATE_MASK) - 1;
-
-	return regmap_update_bits(regmap, RT6160_REG_CNTL, RT6160_RAMPRATE_MASK, sel);
-}
-
 static int rt6160_get_error_flags(struct regulator_dev *rdev, unsigned int *flags)
 {
 	struct regmap *regmap = rdev_get_regmap(rdev);
@@ -203,7 +182,7 @@ static const struct regulator_ops rt6160_regulator_ops = {
 	.set_mode = rt6160_set_mode,
 	.get_mode = rt6160_get_mode,
 	.set_suspend_voltage = rt6160_set_suspend_voltage,
-	.set_ramp_delay = rt6160_set_ramp_delay,
+	.set_ramp_delay = regulator_set_ramp_delay_regmap,
 	.get_error_flags = rt6160_get_error_flags,
 };
 
@@ -292,6 +271,10 @@ static int rt6160_probe(struct i2c_client *i2c)
 	priv->desc.vsel_reg = RT6160_REG_VSELH;
 	priv->desc.vsel_mask = RT6160_VSEL_MASK;
 	priv->desc.n_voltages = RT6160_N_VOUTS;
+	priv->desc.ramp_reg = RT6160_REG_CNTL;
+	priv->desc.ramp_mask = RT6160_RAMPRATE_MASK;
+	priv->desc.ramp_delay_table = rt6160_ramp_tables;
+	priv->desc.n_ramp_values = ARRAY_SIZE(rt6160_ramp_tables);
 	priv->desc.of_map_mode = rt6160_of_map_mode;
 	priv->desc.ops = &rt6160_regulator_ops;
 	if (priv->vsel_active_low)
-- 
cgit v1.2.3-59-g8ed1b


From 23f95199b6446f828bf879ca316f388893435faa Mon Sep 17 00:00:00 2001
From: ChiYuan Huang <cy_huang@richtek.com>
Date: Thu, 10 Jun 2021 22:38:30 +0800
Subject: regulator: rt6160: Remove dummy line and add module description

Remove dummy line and add module description.

Signed-off-by: ChiYuan Huang <cy_huang@richtek.com>
Link: https://lore.kernel.org/r/1623335910-5385-1-git-send-email-u0084500@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
---
 drivers/regulator/rt6160-regulator.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/regulator')

diff --git a/drivers/regulator/rt6160-regulator.c b/drivers/regulator/rt6160-regulator.c
index 69550284083d..b6b53868050f 100644
--- a/drivers/regulator/rt6160-regulator.c
+++ b/drivers/regulator/rt6160-regulator.c
@@ -81,7 +81,6 @@ static int rt6160_disable(struct regulator_dev *rdev)
 	gpiod_set_value_cansleep(priv->enable_gpio, 0);
 
 	return 0;
-
 }
 
 static int rt6160_is_enabled(struct regulator_dev *rdev)
@@ -311,5 +310,6 @@ static struct i2c_driver rt6160_driver = {
 };
 module_i2c_driver(rt6160_driver);
 
+MODULE_DESCRIPTION("Richtek RT6160 voltage regulator driver");
 MODULE_AUTHOR("ChiYuan Huang <cy_huang@richtek.com>");
 MODULE_LICENSE("GPL v2");
-- 
cgit v1.2.3-59-g8ed1b


From 00430f71b2b18e42ba3d733cbd2d725ec5b2ca80 Mon Sep 17 00:00:00 2001
From: Axel Lin <axel.lin@ingics.com>
Date: Thu, 10 Jun 2021 21:41:28 +0800
Subject: regulator: hi6421v600: Use regulator_map_voltage_ascend

All the voltage tables have entries in ascendant order, so use
regulator_map_voltage_ascend to speed up the mapping.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Link: https://lore.kernel.org/r/20210610134128.2477821-1-axel.lin@ingics.com
Signed-off-by: Mark Brown <broonie@kernel.org>
---
 drivers/regulator/hi6421v600-regulator.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/regulator')

diff --git a/drivers/regulator/hi6421v600-regulator.c b/drivers/regulator/hi6421v600-regulator.c
index feddb0b5d4f1..417cf5b4a1c3 100644
--- a/drivers/regulator/hi6421v600-regulator.c
+++ b/drivers/regulator/hi6421v600-regulator.c
@@ -166,7 +166,7 @@ static const struct regulator_ops hi6421_spmi_ldo_rops = {
 	.enable = hi6421_spmi_regulator_enable,
 	.disable = regulator_disable_regmap,
 	.list_voltage = regulator_list_voltage_table,
-	.map_voltage = regulator_map_voltage_iterate,
+	.map_voltage = regulator_map_voltage_ascend,
 	.get_voltage_sel = regulator_get_voltage_sel_regmap,
 	.set_voltage_sel = regulator_set_voltage_sel_regmap,
 	.get_mode = hi6421_spmi_regulator_get_mode,
-- 
cgit v1.2.3-59-g8ed1b


From f3f4f37d53be578c65dd32a1ffad432b33aef236 Mon Sep 17 00:00:00 2001
From: Axel Lin <axel.lin@ingics.com>
Date: Tue, 15 Jun 2021 18:39:47 +0800
Subject: regulator: rt6160: Remove vsel_active_low from struct rt6160_priv

Use a local variable instead is enough, this simplifies the code.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Link: https://lore.kernel.org/r/20210615103947.3387994-1-axel.lin@ingics.com
Signed-off-by: Mark Brown <broonie@kernel.org>
---
 drivers/regulator/rt6160-regulator.c | 20 +++++++++-----------
 1 file changed, 9 insertions(+), 11 deletions(-)

(limited to 'drivers/regulator')

diff --git a/drivers/regulator/rt6160-regulator.c b/drivers/regulator/rt6160-regulator.c
index b6b53868050f..ccd023da4318 100644
--- a/drivers/regulator/rt6160-regulator.c
+++ b/drivers/regulator/rt6160-regulator.c
@@ -42,7 +42,6 @@ struct rt6160_priv {
 	struct regulator_desc desc;
 	struct gpio_desc *enable_gpio;
 	struct regmap *regmap;
-	bool vsel_active_low;
 	bool enable_state;
 };
 
@@ -128,19 +127,15 @@ static unsigned int rt6160_get_mode(struct regulator_dev *rdev)
 
 static int rt6160_set_suspend_voltage(struct regulator_dev *rdev, int uV)
 {
-	struct rt6160_priv *priv = rdev_get_drvdata(rdev);
 	struct regmap *regmap = rdev_get_regmap(rdev);
-	unsigned int reg = RT6160_REG_VSELH;
 	int vsel;
 
 	vsel = regulator_map_voltage_linear(rdev, uV, uV);
 	if (vsel < 0)
 		return vsel;
 
-	if (priv->vsel_active_low)
-		reg = RT6160_REG_VSELL;
-
-	return regmap_update_bits(regmap, reg, RT6160_VSEL_MASK, vsel);
+	return regmap_update_bits(regmap, rdev->desc->vsel_reg,
+				  RT6160_VSEL_MASK, vsel);
 }
 
 static int rt6160_get_error_flags(struct regulator_dev *rdev, unsigned int *flags)
@@ -228,6 +223,7 @@ static int rt6160_probe(struct i2c_client *i2c)
 	struct rt6160_priv *priv;
 	struct regulator_config regulator_cfg = {};
 	struct regulator_dev *rdev;
+	bool vsel_active_low;
 	unsigned int devid;
 	int ret;
 
@@ -235,7 +231,8 @@ static int rt6160_probe(struct i2c_client *i2c)
 	if (!priv)
 		return -ENOMEM;
 
-	priv->vsel_active_low = device_property_present(&i2c->dev, "richtek,vsel-active-low");
+	vsel_active_low =
+		device_property_present(&i2c->dev, "richtek,vsel-active-low");
 
 	priv->enable_gpio = devm_gpiod_get_optional(&i2c->dev, "enable", GPIOD_OUT_HIGH);
 	if (IS_ERR(priv->enable_gpio)) {
@@ -267,7 +264,10 @@ static int rt6160_probe(struct i2c_client *i2c)
 	priv->desc.owner = THIS_MODULE;
 	priv->desc.min_uV = RT6160_VOUT_MINUV;
 	priv->desc.uV_step = RT6160_VOUT_STPUV;
-	priv->desc.vsel_reg = RT6160_REG_VSELH;
+	if (vsel_active_low)
+		priv->desc.vsel_reg = RT6160_REG_VSELL;
+	else
+		priv->desc.vsel_reg = RT6160_REG_VSELH;
 	priv->desc.vsel_mask = RT6160_VSEL_MASK;
 	priv->desc.n_voltages = RT6160_N_VOUTS;
 	priv->desc.ramp_reg = RT6160_REG_CNTL;
@@ -276,8 +276,6 @@ static int rt6160_probe(struct i2c_client *i2c)
 	priv->desc.n_ramp_values = ARRAY_SIZE(rt6160_ramp_tables);
 	priv->desc.of_map_mode = rt6160_of_map_mode;
 	priv->desc.ops = &rt6160_regulator_ops;
-	if (priv->vsel_active_low)
-		priv->desc.vsel_reg = RT6160_REG_VSELL;
 
 	regulator_cfg.dev = &i2c->dev;
 	regulator_cfg.of_node = i2c->dev.of_node;
-- 
cgit v1.2.3-59-g8ed1b


From 8c485bedfb7852fa4de2a34aac2a6fd911f539f4 Mon Sep 17 00:00:00 2001
From: Alistair Francis <alistair@alistair23.me>
Date: Tue, 15 Jun 2021 20:33:58 +1000
Subject: regulator: sy7636a: Initial commit

Initial support for the Silergy SY7636A-regulator Power Management chip.

Signed-off-by: Alistair Francis <alistair@alistair23.me>
Link: https://lore.kernel.org/r/20210615103400.946-3-alistair@alistair23.me
Signed-off-by: Mark Brown <broonie@kernel.org>
---
 drivers/regulator/Kconfig             |   6 ++
 drivers/regulator/Makefile            |   1 +
 drivers/regulator/sy7636a-regulator.c | 127 ++++++++++++++++++++++++++++++++++
 3 files changed, 134 insertions(+)
 create mode 100644 drivers/regulator/sy7636a-regulator.c

(limited to 'drivers/regulator')

diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
index 3134211b9498..a69b546872c1 100644
--- a/drivers/regulator/Kconfig
+++ b/drivers/regulator/Kconfig
@@ -1169,6 +1169,12 @@ config REGULATOR_STW481X_VMMC
 	  This driver supports the internal VMMC regulator in the STw481x
 	  PMIC chips.
 
+config REGULATOR_SY7636A
+	tristate "Silergy SY7636A voltage regulator"
+	depends on MFD_SY7636A
+	help
+	  This driver supports Silergy SY3686A voltage regulator.
+
 config REGULATOR_SY8106A
 	tristate "Silergy SY8106A regulator"
 	depends on I2C && (OF || COMPILE_TEST)
diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile
index 59ce3359a84a..028f2b8788db 100644
--- a/drivers/regulator/Makefile
+++ b/drivers/regulator/Makefile
@@ -138,6 +138,7 @@ obj-$(CONFIG_REGULATOR_STM32_VREFBUF) += stm32-vrefbuf.o
 obj-$(CONFIG_REGULATOR_STM32_PWR) += stm32-pwr.o
 obj-$(CONFIG_REGULATOR_STPMIC1) += stpmic1_regulator.o
 obj-$(CONFIG_REGULATOR_STW481X_VMMC) += stw481x-vmmc.o
+obj-$(CONFIG_REGULATOR_SY7636A) += sy7636a-regulator.o
 obj-$(CONFIG_REGULATOR_SY8106A) += sy8106a-regulator.o
 obj-$(CONFIG_REGULATOR_SY8824X) += sy8824x.o
 obj-$(CONFIG_REGULATOR_SY8827N) += sy8827n.o
diff --git a/drivers/regulator/sy7636a-regulator.c b/drivers/regulator/sy7636a-regulator.c
new file mode 100644
index 000000000000..c384c2b6ac46
--- /dev/null
+++ b/drivers/regulator/sy7636a-regulator.c
@@ -0,0 +1,127 @@
+// SPDX-License-Identifier: GPL-2.0+
+//
+// Functions to access SY3686A power management chip voltages
+//
+// Copyright (C) 2019 reMarkable AS - http://www.remarkable.com/
+//
+// Authors: Lars Ivar Miljeteig <lars.ivar.miljeteig@remarkable.com>
+//          Alistair Francis <alistair@alistair23.me>
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/gpio/consumer.h>
+#include <linux/mfd/sy7636a.h>
+
+#define SY7636A_POLL_ENABLED_TIME 500
+
+static int sy7636a_get_vcom_voltage_op(struct regulator_dev *rdev)
+{
+	int ret;
+	unsigned int val, val_h;
+
+	ret = regmap_read(rdev->regmap, SY7636A_REG_VCOM_ADJUST_CTRL_L, &val);
+	if (ret)
+		return ret;
+
+	ret = regmap_read(rdev->regmap, SY7636A_REG_VCOM_ADJUST_CTRL_H, &val_h);
+	if (ret)
+		return ret;
+
+	val |= (val_h << VCOM_ADJUST_CTRL_SHIFT);
+
+	return (val & VCOM_ADJUST_CTRL_MASK) * VCOM_ADJUST_CTRL_SCAL;
+}
+
+static int sy7636a_get_status(struct regulator_dev *rdev)
+{
+	struct sy7636a *sy7636a = dev_get_drvdata(rdev->dev.parent);
+	int ret = 0;
+
+	ret = gpiod_get_value_cansleep(sy7636a->pgood_gpio);
+	if (ret < 0)
+		dev_err(&rdev->dev, "Failed to read pgood gpio: %d\n", ret);
+
+	return ret;
+}
+
+static const struct regulator_ops sy7636a_vcom_volt_ops = {
+	.get_voltage = sy7636a_get_vcom_voltage_op,
+	.enable = regulator_enable_regmap,
+	.disable = regulator_disable_regmap,
+	.is_enabled = regulator_is_enabled_regmap,
+	.get_status = sy7636a_get_status,
+};
+
+struct regulator_desc desc = {
+	.name = "vcom",
+	.id = 0,
+	.ops = &sy7636a_vcom_volt_ops,
+	.type = REGULATOR_VOLTAGE,
+	.owner = THIS_MODULE,
+	.enable_reg = SY7636A_REG_OPERATION_MODE_CRL,
+	.enable_mask = SY7636A_OPERATION_MODE_CRL_ONOFF,
+	.poll_enabled_time	= SY7636A_POLL_ENABLED_TIME,
+	.regulators_node = of_match_ptr("regulators"),
+	.of_match = of_match_ptr("vcom"),
+};
+
+static int sy7636a_regulator_probe(struct platform_device *pdev)
+{
+	struct sy7636a *sy7636a = dev_get_drvdata(pdev->dev.parent);
+	struct regulator_config config = { };
+	struct regulator_dev *rdev;
+	struct gpio_desc *gdp;
+	int ret;
+
+	if (!sy7636a)
+		return -EPROBE_DEFER;
+
+	platform_set_drvdata(pdev, sy7636a);
+
+	gdp = devm_gpiod_get(sy7636a->dev, "epd-pwr-good", GPIOD_IN);
+	if (IS_ERR(gdp)) {
+		dev_err(sy7636a->dev, "Power good GPIO fault %ld\n", PTR_ERR(gdp));
+		return PTR_ERR(gdp);
+	}
+
+	sy7636a->pgood_gpio = gdp;
+
+	ret = regmap_write(sy7636a->regmap, SY7636A_REG_POWER_ON_DELAY_TIME, 0x0);
+	if (ret) {
+		dev_err(sy7636a->dev, "Failed to initialize regulator: %d\n", ret);
+		return ret;
+	}
+
+	config.dev = &pdev->dev;
+	config.dev->of_node = sy7636a->dev->of_node;
+	config.driver_data = sy7636a;
+	config.regmap = sy7636a->regmap;
+
+	rdev = devm_regulator_register(&pdev->dev, &desc, &config);
+	if (IS_ERR(rdev)) {
+		dev_err(sy7636a->dev, "Failed to register %s regulator\n",
+			pdev->name);
+		return PTR_ERR(rdev);
+	}
+
+	return 0;
+}
+
+static const struct platform_device_id sy7636a_regulator_id_table[] = {
+	{ "sy7636a-regulator", },
+};
+MODULE_DEVICE_TABLE(platform, sy7636a_regulator_id_table);
+
+static struct platform_driver sy7636a_regulator_driver = {
+	.driver = {
+		.name = "sy7636a-regulator",
+	},
+	.probe = sy7636a_regulator_probe,
+	.id_table = sy7636a_regulator_id_table,
+};
+module_platform_driver(sy7636a_regulator_driver);
+
+MODULE_AUTHOR("Lars Ivar Miljeteig <lars.ivar.miljeteig@remarkable.com>");
+MODULE_DESCRIPTION("SY7636A voltage regulator driver");
+MODULE_LICENSE("GPL v2");
-- 
cgit v1.2.3-59-g8ed1b


From 70d654ea3de937d7754c107bb8eeb20e30262c89 Mon Sep 17 00:00:00 2001
From: Axel Lin <axel.lin@ingics.com>
Date: Tue, 15 Jun 2021 21:29:34 +0800
Subject: regulator: mt6315: Fix checking return value of
 devm_regmap_init_spmi_ext

devm_regmap_init_spmi_ext() returns ERR_PTR() on error.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Link: https://lore.kernel.org/r/20210615132934.3453965-1-axel.lin@ingics.com
Signed-off-by: Mark Brown <broonie@kernel.org>
---
 drivers/regulator/mt6315-regulator.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'drivers/regulator')

diff --git a/drivers/regulator/mt6315-regulator.c b/drivers/regulator/mt6315-regulator.c
index 8c5d72869c2b..ebb68d3b5390 100644
--- a/drivers/regulator/mt6315-regulator.c
+++ b/drivers/regulator/mt6315-regulator.c
@@ -223,8 +223,8 @@ static int mt6315_regulator_probe(struct spmi_device *pdev)
 	int i;
 
 	regmap = devm_regmap_init_spmi_ext(pdev, &mt6315_regmap_config);
-	if (!regmap)
-		return -ENODEV;
+	if (IS_ERR(regmap))
+		return PTR_ERR(regmap);
 
 	chip = devm_kzalloc(dev, sizeof(struct mt6315_chip), GFP_KERNEL);
 	if (!chip)
-- 
cgit v1.2.3-59-g8ed1b


From 512d895664a318d57de0ca3655d2bf1c280767a0 Mon Sep 17 00:00:00 2001
From: Axel Lin <axel.lin@ingics.com>
Date: Wed, 16 Jun 2021 09:18:16 +0800
Subject: regulator: rt6160: Fix setting suspend voltage

The vsel active level is for the normal voltage, the opposite level is
the suspend voltage.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Reviewed-by: ChiYuan Huang <cy_huang@richtek.com>
Link: https://lore.kernel.org/r/20210616011816.3479406-1-axel.lin@ingics.com
Signed-off-by: Mark Brown <broonie@kernel.org>
---
 drivers/regulator/rt6160-regulator.c | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

(limited to 'drivers/regulator')

diff --git a/drivers/regulator/rt6160-regulator.c b/drivers/regulator/rt6160-regulator.c
index ccd023da4318..5d7b0e7ad69a 100644
--- a/drivers/regulator/rt6160-regulator.c
+++ b/drivers/regulator/rt6160-regulator.c
@@ -128,13 +128,19 @@ static unsigned int rt6160_get_mode(struct regulator_dev *rdev)
 static int rt6160_set_suspend_voltage(struct regulator_dev *rdev, int uV)
 {
 	struct regmap *regmap = rdev_get_regmap(rdev);
+	unsigned int suspend_vsel_reg;
 	int vsel;
 
 	vsel = regulator_map_voltage_linear(rdev, uV, uV);
 	if (vsel < 0)
 		return vsel;
 
-	return regmap_update_bits(regmap, rdev->desc->vsel_reg,
+	if (rdev->desc->vsel_reg == RT6160_REG_VSELL)
+		suspend_vsel_reg = RT6160_REG_VSELH;
+	else
+		suspend_vsel_reg = RT6160_REG_VSELL;
+
+	return regmap_update_bits(regmap, suspend_vsel_reg,
 				  RT6160_VSEL_MASK, vsel);
 }
 
-- 
cgit v1.2.3-59-g8ed1b


From 686f6b31bf6cea71ca941b6dbf9e1388d54222b6 Mon Sep 17 00:00:00 2001
From: Axel Lin <axel.lin@ingics.com>
Date: Wed, 16 Jun 2021 11:44:56 +0800
Subject: regulator: sy7636a: Add terminating entry for platform_device_id
 table

The platform_device_id table is supposed to be zero-terminated.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Reviewed-by: Alistair Francis <alistair@alistair23.me>
Link: https://lore.kernel.org/r/20210616034458.3499522-1-axel.lin@ingics.com
Signed-off-by: Mark Brown <broonie@kernel.org>
---
 drivers/regulator/sy7636a-regulator.c | 1 +
 1 file changed, 1 insertion(+)

(limited to 'drivers/regulator')

diff --git a/drivers/regulator/sy7636a-regulator.c b/drivers/regulator/sy7636a-regulator.c
index c384c2b6ac46..54ab1be1001e 100644
--- a/drivers/regulator/sy7636a-regulator.c
+++ b/drivers/regulator/sy7636a-regulator.c
@@ -110,6 +110,7 @@ static int sy7636a_regulator_probe(struct platform_device *pdev)
 
 static const struct platform_device_id sy7636a_regulator_id_table[] = {
 	{ "sy7636a-regulator", },
+	{ }
 };
 MODULE_DEVICE_TABLE(platform, sy7636a_regulator_id_table);
 
-- 
cgit v1.2.3-59-g8ed1b


From 31a89d297e196472875dc7d4a8f5dd0aaefcc0b4 Mon Sep 17 00:00:00 2001
From: Axel Lin <axel.lin@ingics.com>
Date: Wed, 16 Jun 2021 11:44:57 +0800
Subject: regulator: sy7636a: Make regulator_desc static const

It's only used in this file and never changed, make it static const.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Reviewed-by: Alistair Francis <alistair@alistair23.me>
Link: https://lore.kernel.org/r/20210616034458.3499522-2-axel.lin@ingics.com
Signed-off-by: Mark Brown <broonie@kernel.org>
---
 drivers/regulator/sy7636a-regulator.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'drivers/regulator')

diff --git a/drivers/regulator/sy7636a-regulator.c b/drivers/regulator/sy7636a-regulator.c
index 54ab1be1001e..c71c0a007d95 100644
--- a/drivers/regulator/sy7636a-regulator.c
+++ b/drivers/regulator/sy7636a-regulator.c
@@ -53,7 +53,7 @@ static const struct regulator_ops sy7636a_vcom_volt_ops = {
 	.get_status = sy7636a_get_status,
 };
 
-struct regulator_desc desc = {
+static const struct regulator_desc desc = {
 	.name = "vcom",
 	.id = 0,
 	.ops = &sy7636a_vcom_volt_ops,
@@ -61,7 +61,7 @@ struct regulator_desc desc = {
 	.owner = THIS_MODULE,
 	.enable_reg = SY7636A_REG_OPERATION_MODE_CRL,
 	.enable_mask = SY7636A_OPERATION_MODE_CRL_ONOFF,
-	.poll_enabled_time	= SY7636A_POLL_ENABLED_TIME,
+	.poll_enabled_time = SY7636A_POLL_ENABLED_TIME,
 	.regulators_node = of_match_ptr("regulators"),
 	.of_match = of_match_ptr("vcom"),
 };
-- 
cgit v1.2.3-59-g8ed1b


From 830c364f4a2299e8215c40f0a2ba9229c0fdeede Mon Sep 17 00:00:00 2001
From: Axel Lin <axel.lin@ingics.com>
Date: Wed, 16 Jun 2021 11:44:58 +0800
Subject: regulator: sy7636a: Use rdev_get_drvdata at proper place

At the context with *rdev, use rdev_get_drvdata() is more intuitive.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Reviewed-by: Alistair Francis <alistair@alistair23.me>
Link: https://lore.kernel.org/r/20210616034458.3499522-3-axel.lin@ingics.com
Signed-off-by: Mark Brown <broonie@kernel.org>
---
 drivers/regulator/sy7636a-regulator.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/regulator')

diff --git a/drivers/regulator/sy7636a-regulator.c b/drivers/regulator/sy7636a-regulator.c
index c71c0a007d95..e021ae08cbaa 100644
--- a/drivers/regulator/sy7636a-regulator.c
+++ b/drivers/regulator/sy7636a-regulator.c
@@ -35,7 +35,7 @@ static int sy7636a_get_vcom_voltage_op(struct regulator_dev *rdev)
 
 static int sy7636a_get_status(struct regulator_dev *rdev)
 {
-	struct sy7636a *sy7636a = dev_get_drvdata(rdev->dev.parent);
+	struct sy7636a *sy7636a = rdev_get_drvdata(rdev);
 	int ret = 0;
 
 	ret = gpiod_get_value_cansleep(sy7636a->pgood_gpio);
-- 
cgit v1.2.3-59-g8ed1b


From 7740ab84c13e32002742106afd443a4ca7fe3918 Mon Sep 17 00:00:00 2001
From: Rouven Czerwinski <r.czerwinski@pengutronix.de>
Date: Wed, 16 Jun 2021 14:53:31 +0200
Subject: regulator: fixed: use dev_err_probe for gpio

Instead of returning the the PTR_ERR directly, use dev_err_probe which
will also correctly set the deferred probe reason in
/sys/kernel/debug/deferred_devices, making it easier to debug missing
devices on the system.

Signed-off-by: Rouven Czerwinski <r.czerwinski@pengutronix.de>
Link: https://lore.kernel.org/r/20210616125331.153414-1-r.czerwinski@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
---
 drivers/regulator/fixed.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

(limited to 'drivers/regulator')

diff --git a/drivers/regulator/fixed.c b/drivers/regulator/fixed.c
index 02ad83153e19..78f3a938b39b 100644
--- a/drivers/regulator/fixed.c
+++ b/drivers/regulator/fixed.c
@@ -271,7 +271,8 @@ static int reg_fixed_voltage_probe(struct platform_device *pdev)
 	 */
 	cfg.ena_gpiod = gpiod_get_optional(&pdev->dev, NULL, gflags);
 	if (IS_ERR(cfg.ena_gpiod))
-		return PTR_ERR(cfg.ena_gpiod);
+		return dev_err_probe(&pdev->dev, PTR_ERR(cfg.ena_gpiod),
+				     "can't get GPIO\n");
 
 	cfg.dev = &pdev->dev;
 	cfg.init_data = config->init_data;
-- 
cgit v1.2.3-59-g8ed1b


From ba5dabf40e9143ff6c48943b76a532d5ab34d0e8 Mon Sep 17 00:00:00 2001
From: Bhupesh Sharma <bhupesh.sharma@linaro.org>
Date: Thu, 17 Jun 2021 10:47:10 +0530
Subject: regulator: qcom-rpmh: Cleanup terminator line commas

Cleanup the qcom-rpmh regulator driver to remove comma(s)
at the end of the terminator line(s).

Cc: Mark Brown <broonie@kernel.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
Link: https://lore.kernel.org/r/20210617051712.345372-4-bhupesh.sharma@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
---
 drivers/regulator/qcom-rpmh-regulator.c | 24 ++++++++++++------------
 1 file changed, 12 insertions(+), 12 deletions(-)

(limited to 'drivers/regulator')

diff --git a/drivers/regulator/qcom-rpmh-regulator.c b/drivers/regulator/qcom-rpmh-regulator.c
index 22fec370fa61..6a8b7ac67bbe 100644
--- a/drivers/regulator/qcom-rpmh-regulator.c
+++ b/drivers/regulator/qcom-rpmh-regulator.c
@@ -811,12 +811,12 @@ static const struct rpmh_vreg_init_data pm8998_vreg_data[] = {
 	RPMH_VREG("ldo28",  "ldo%s28", &pmic4_pldo,      "vdd-l16-l28"),
 	RPMH_VREG("lvs1",   "vs%s1",   &pmic4_lvs,       "vin-lvs-1-2"),
 	RPMH_VREG("lvs2",   "vs%s2",   &pmic4_lvs,       "vin-lvs-1-2"),
-	{},
+	{}
 };
 
 static const struct rpmh_vreg_init_data pmi8998_vreg_data[] = {
 	RPMH_VREG("bob",    "bob%s1",  &pmic4_bob,       "vdd-bob"),
-	{},
+	{}
 };
 
 static const struct rpmh_vreg_init_data pm8005_vreg_data[] = {
@@ -824,7 +824,7 @@ static const struct rpmh_vreg_init_data pm8005_vreg_data[] = {
 	RPMH_VREG("smps2",  "smp%s2",  &pmic4_ftsmps426, "vdd-s2"),
 	RPMH_VREG("smps3",  "smp%s3",  &pmic4_ftsmps426, "vdd-s3"),
 	RPMH_VREG("smps4",  "smp%s4",  &pmic4_ftsmps426, "vdd-s4"),
-	{},
+	{}
 };
 
 static const struct rpmh_vreg_init_data pm8150_vreg_data[] = {
@@ -856,7 +856,7 @@ static const struct rpmh_vreg_init_data pm8150_vreg_data[] = {
 	RPMH_VREG("ldo16",  "ldo%s16", &pmic5_pldo,      "vdd-l13-l16-l17"),
 	RPMH_VREG("ldo17",  "ldo%s17", &pmic5_pldo,      "vdd-l13-l16-l17"),
 	RPMH_VREG("ldo18",  "ldo%s18", &pmic5_nldo,      "vdd-l3-l4-l5-l18"),
-	{},
+	{}
 };
 
 static const struct rpmh_vreg_init_data pm8150l_vreg_data[] = {
@@ -880,7 +880,7 @@ static const struct rpmh_vreg_init_data pm8150l_vreg_data[] = {
 	RPMH_VREG("ldo10",  "ldo%s10", &pmic5_pldo,      "vdd-l9-l10"),
 	RPMH_VREG("ldo11",  "ldo%s11", &pmic5_pldo,      "vdd-l7-l11"),
 	RPMH_VREG("bob",    "bob%s1",  &pmic5_bob,       "vdd-bob"),
-	{},
+	{}
 };
 
 static const struct rpmh_vreg_init_data pm8350_vreg_data[] = {
@@ -906,7 +906,7 @@ static const struct rpmh_vreg_init_data pm8350_vreg_data[] = {
 	RPMH_VREG("ldo8",   "ldo%s8",  &pmic5_nldo,      "vdd-l8"),
 	RPMH_VREG("ldo9",   "ldo%s9",  &pmic5_nldo,      "vdd-l6-l9-l10"),
 	RPMH_VREG("ldo10",  "ldo%s10", &pmic5_nldo,      "vdd-l6-l9-l10"),
-	{},
+	{}
 };
 
 static const struct rpmh_vreg_init_data pm8350c_vreg_data[] = {
@@ -934,7 +934,7 @@ static const struct rpmh_vreg_init_data pm8350c_vreg_data[] = {
 	RPMH_VREG("ldo12",  "ldo%s12", &pmic5_pldo_lv,   "vdd-l1-l12"),
 	RPMH_VREG("ldo13",  "ldo%s13", &pmic5_pldo,      "vdd-l3-l4-l5-l7-l13"),
 	RPMH_VREG("bob",    "bob%s1",  &pmic5_bob,       "vdd-bob"),
-	{},
+	{}
 };
 
 static const struct rpmh_vreg_init_data pm8009_vreg_data[] = {
@@ -947,7 +947,7 @@ static const struct rpmh_vreg_init_data pm8009_vreg_data[] = {
 	RPMH_VREG("ldo5",   "ldo%s5",  &pmic5_pldo,      "vdd-l5-l6"),
 	RPMH_VREG("ldo6",   "ldo%s6",  &pmic5_pldo,      "vdd-l5-l6"),
 	RPMH_VREG("ldo7",   "ldo%s7",  &pmic5_pldo_lv,   "vdd-l7"),
-	{},
+	{}
 };
 
 static const struct rpmh_vreg_init_data pm8009_1_vreg_data[] = {
@@ -960,7 +960,7 @@ static const struct rpmh_vreg_init_data pm8009_1_vreg_data[] = {
 	RPMH_VREG("ldo5",   "ldo%s5",  &pmic5_pldo,      "vdd-l5-l6"),
 	RPMH_VREG("ldo6",   "ldo%s6",  &pmic5_pldo,      "vdd-l5-l6"),
 	RPMH_VREG("ldo7",   "ldo%s6",  &pmic5_pldo_lv,   "vdd-l7"),
-	{},
+	{}
 };
 
 static const struct rpmh_vreg_init_data pm6150_vreg_data[] = {
@@ -988,7 +988,7 @@ static const struct rpmh_vreg_init_data pm6150_vreg_data[] = {
 	RPMH_VREG("ldo17",  "ldo%s17", &pmic5_pldo,   "vdd-l5-l16-l17-l18-l19"),
 	RPMH_VREG("ldo18",  "ldo%s18", &pmic5_pldo,   "vdd-l5-l16-l17-l18-l19"),
 	RPMH_VREG("ldo19",  "ldo%s19", &pmic5_pldo,   "vdd-l5-l16-l17-l18-l19"),
-	{},
+	{}
 };
 
 static const struct rpmh_vreg_init_data pm6150l_vreg_data[] = {
@@ -1012,7 +1012,7 @@ static const struct rpmh_vreg_init_data pm6150l_vreg_data[] = {
 	RPMH_VREG("ldo10",  "ldo%s10", &pmic5_pldo,      "vdd-l9-l10"),
 	RPMH_VREG("ldo11",  "ldo%s11", &pmic5_pldo,      "vdd-l7-l11"),
 	RPMH_VREG("bob",    "bob%s1",  &pmic5_bob,       "vdd-bob"),
-	{},
+	{}
 };
 
 static const struct rpmh_vreg_init_data pmx55_vreg_data[] = {
@@ -1039,7 +1039,7 @@ static const struct rpmh_vreg_init_data pmx55_vreg_data[] = {
 	RPMH_VREG("ldo14",   "ldo%s14",   &pmic5_nldo,      "vdd-l14"),
 	RPMH_VREG("ldo15",   "ldo%s15",   &pmic5_nldo,      "vdd-l15"),
 	RPMH_VREG("ldo16",   "ldo%s16",   &pmic5_pldo,      "vdd-l16"),
-	{},
+	{}
 };
 
 static const struct rpmh_vreg_init_data pm7325_vreg_data[] = {
-- 
cgit v1.2.3-59-g8ed1b


From f26cdadad729743888eb4ac2c17eac3cf845b493 Mon Sep 17 00:00:00 2001
From: Bhupesh Sharma <bhupesh.sharma@linaro.org>
Date: Thu, 17 Jun 2021 10:47:11 +0530
Subject: regulator: qcom-rpmh: Add terminator at the end of
 pm7325x_vreg_data[] array

Add missing terminator(s) at the end of pm7325x_vreg_data[]
array instances.

Fixes: c4e5aa3dbee5 ("regulator: qcom-rpmh: Add PM7325/PMR735A regulator support")
Cc: Mark Brown <broonie@kernel.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
Link: https://lore.kernel.org/r/20210617051712.345372-5-bhupesh.sharma@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
---
 drivers/regulator/qcom-rpmh-regulator.c | 2 ++
 1 file changed, 2 insertions(+)

(limited to 'drivers/regulator')

diff --git a/drivers/regulator/qcom-rpmh-regulator.c b/drivers/regulator/qcom-rpmh-regulator.c
index 6a8b7ac67bbe..af41a517da99 100644
--- a/drivers/regulator/qcom-rpmh-regulator.c
+++ b/drivers/regulator/qcom-rpmh-regulator.c
@@ -1070,6 +1070,7 @@ static const struct rpmh_vreg_init_data pm7325_vreg_data[] = {
 	RPMH_VREG("ldo17",  "ldo%s17", &pmic5_pldo_lv,   "vdd-l11-l17-l18-l19"),
 	RPMH_VREG("ldo18",  "ldo%s18", &pmic5_pldo_lv,   "vdd-l11-l17-l18-l19"),
 	RPMH_VREG("ldo19",  "ldo%s19", &pmic5_pldo_lv,   "vdd-l11-l17-l18-l19"),
+	{}
 };
 
 static const struct rpmh_vreg_init_data pmr735a_vreg_data[] = {
@@ -1083,6 +1084,7 @@ static const struct rpmh_vreg_init_data pmr735a_vreg_data[] = {
 	RPMH_VREG("ldo5",   "ldo%s5",  &pmic5_nldo,      "vdd-l5-l6"),
 	RPMH_VREG("ldo6",   "ldo%s6",  &pmic5_nldo,      "vdd-l5-l6"),
 	RPMH_VREG("ldo7",   "ldo%s7",  &pmic5_pldo,      "vdd-l7-bob"),
+	{}
 };
 
 static int rpmh_regulator_probe(struct platform_device *pdev)
-- 
cgit v1.2.3-59-g8ed1b


From 9a336ed97d00bb69547272fc7d0439802bece375 Mon Sep 17 00:00:00 2001
From: Bhupesh Sharma <bhupesh.sharma@linaro.org>
Date: Thu, 17 Jun 2021 10:47:12 +0530
Subject: regulator: qcom-rpmh: Add new regulator found on SA8155p adp board

SA8155p-adp board supports a new regulator - pmm8155au.

The output power management circuits in this regulator include:
- FTS510 smps,
- HFS510 smps, and
- LDO510 linear regulators

Add support for the same.

Cc: Mark Brown <broonie@kernel.org>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210617051712.345372-6-bhupesh.sharma@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
---
 drivers/regulator/qcom-rpmh-regulator.c | 36 +++++++++++++++++++++++++++++++++
 1 file changed, 36 insertions(+)

(limited to 'drivers/regulator')

diff --git a/drivers/regulator/qcom-rpmh-regulator.c b/drivers/regulator/qcom-rpmh-regulator.c
index af41a517da99..6cca910a76de 100644
--- a/drivers/regulator/qcom-rpmh-regulator.c
+++ b/drivers/regulator/qcom-rpmh-regulator.c
@@ -883,6 +883,38 @@ static const struct rpmh_vreg_init_data pm8150l_vreg_data[] = {
 	{}
 };
 
+static const struct rpmh_vreg_init_data pmm8155au_vreg_data[] = {
+	RPMH_VREG("smps1",  "smp%s1",  &pmic5_ftsmps510, "vdd-s1"),
+	RPMH_VREG("smps2",  "smp%s2",  &pmic5_ftsmps510, "vdd-s2"),
+	RPMH_VREG("smps3",  "smp%s3",  &pmic5_ftsmps510, "vdd-s3"),
+	RPMH_VREG("smps4",  "smp%s4",  &pmic5_hfsmps510, "vdd-s4"),
+	RPMH_VREG("smps5",  "smp%s5",  &pmic5_hfsmps510, "vdd-s5"),
+	RPMH_VREG("smps6",  "smp%s6",  &pmic5_ftsmps510, "vdd-s6"),
+	RPMH_VREG("smps7",  "smp%s7",  &pmic5_ftsmps510, "vdd-s7"),
+	RPMH_VREG("smps8",  "smp%s8",  &pmic5_ftsmps510, "vdd-s8"),
+	RPMH_VREG("smps9",  "smp%s9",  &pmic5_ftsmps510, "vdd-s9"),
+	RPMH_VREG("smps10", "smp%s10", &pmic5_ftsmps510, "vdd-s10"),
+	RPMH_VREG("ldo1",   "ldo%s1",  &pmic5_nldo,      "vdd-l1-l8-l11"),
+	RPMH_VREG("ldo2",   "ldo%s2",  &pmic5_pldo,      "vdd-l2-l10"),
+	RPMH_VREG("ldo3",   "ldo%s3",  &pmic5_nldo,      "vdd-l3-l4-l5-l18"),
+	RPMH_VREG("ldo4",   "ldo%s4",  &pmic5_nldo,      "vdd-l3-l4-l5-l18"),
+	RPMH_VREG("ldo5",   "ldo%s5",  &pmic5_nldo,      "vdd-l3-l4-l5-l18"),
+	RPMH_VREG("ldo6",   "ldo%s6",  &pmic5_nldo,      "vdd-l6-l9"),
+	RPMH_VREG("ldo7",   "ldo%s7",  &pmic5_pldo_lv,   "vdd-l7-l12-l14-l15"),
+	RPMH_VREG("ldo8",   "ldo%s8",  &pmic5_nldo,      "vdd-l1-l8-l11"),
+	RPMH_VREG("ldo9",   "ldo%s9",  &pmic5_nldo,      "vdd-l6-l9"),
+	RPMH_VREG("ldo10",  "ldo%s10", &pmic5_pldo,      "vdd-l2-l10"),
+	RPMH_VREG("ldo11",  "ldo%s11", &pmic5_nldo,      "vdd-l1-l8-l11"),
+	RPMH_VREG("ldo12",  "ldo%s12", &pmic5_pldo_lv,   "vdd-l7-l12-l14-l15"),
+	RPMH_VREG("ldo13",  "ldo%s13", &pmic5_pldo,      "vdd-l13-l16-l17"),
+	RPMH_VREG("ldo14",  "ldo%s14", &pmic5_pldo_lv,   "vdd-l7-l12-l14-l15"),
+	RPMH_VREG("ldo15",  "ldo%s15", &pmic5_pldo_lv,   "vdd-l7-l12-l14-l15"),
+	RPMH_VREG("ldo16",  "ldo%s16", &pmic5_pldo,      "vdd-l13-l16-l17"),
+	RPMH_VREG("ldo17",  "ldo%s17", &pmic5_pldo,      "vdd-l13-l16-l17"),
+	RPMH_VREG("ldo18",  "ldo%s18", &pmic5_nldo,      "vdd-l3-l4-l5-l18"),
+	{}
+};
+
 static const struct rpmh_vreg_init_data pm8350_vreg_data[] = {
 	RPMH_VREG("smps1",  "smp%s1",  &pmic5_ftsmps510, "vdd-s1"),
 	RPMH_VREG("smps2",  "smp%s2",  &pmic5_ftsmps510, "vdd-s2"),
@@ -1177,6 +1209,10 @@ static const struct of_device_id __maybe_unused rpmh_regulator_match_table[] = {
 		.compatible = "qcom,pmc8180c-rpmh-regulators",
 		.data = pm8150l_vreg_data,
 	},
+	{
+		.compatible = "qcom,pmm8155au-rpmh-regulators",
+		.data = pmm8155au_vreg_data,
+	},
 	{
 		.compatible = "qcom,pmx55-rpmh-regulators",
 		.data = pmx55_vreg_data,
-- 
cgit v1.2.3-59-g8ed1b


From ae60e6a9d24e89a74e2512204ad04de94921bdd2 Mon Sep 17 00:00:00 2001
From: Axel Lin <axel.lin@ingics.com>
Date: Sat, 19 Jun 2021 20:41:33 +0800
Subject: regulator: hi6421: Use correct variable type for regmap api val
 argument

Use unsigned int instead of u32 for regmap_read/regmap_update_bits val
argument.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Link: https://lore.kernel.org/r/20210619124133.4096683-1-axel.lin@ingics.com
Signed-off-by: Mark Brown <broonie@kernel.org>
---
 drivers/regulator/hi6421-regulator.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

(limited to 'drivers/regulator')

diff --git a/drivers/regulator/hi6421-regulator.c b/drivers/regulator/hi6421-regulator.c
index dc631c1a46b4..bff8c515dcde 100644
--- a/drivers/regulator/hi6421-regulator.c
+++ b/drivers/regulator/hi6421-regulator.c
@@ -386,7 +386,7 @@ static int hi6421_regulator_enable(struct regulator_dev *rdev)
 static unsigned int hi6421_regulator_ldo_get_mode(struct regulator_dev *rdev)
 {
 	struct hi6421_regulator_info *info = rdev_get_drvdata(rdev);
-	u32 reg_val;
+	unsigned int reg_val;
 
 	regmap_read(rdev->regmap, rdev->desc->enable_reg, &reg_val);
 	if (reg_val & info->mode_mask)
@@ -398,7 +398,7 @@ static unsigned int hi6421_regulator_ldo_get_mode(struct regulator_dev *rdev)
 static unsigned int hi6421_regulator_buck_get_mode(struct regulator_dev *rdev)
 {
 	struct hi6421_regulator_info *info = rdev_get_drvdata(rdev);
-	u32 reg_val;
+	unsigned int reg_val;
 
 	regmap_read(rdev->regmap, rdev->desc->enable_reg, &reg_val);
 	if (reg_val & info->mode_mask)
@@ -411,7 +411,7 @@ static int hi6421_regulator_ldo_set_mode(struct regulator_dev *rdev,
 						unsigned int mode)
 {
 	struct hi6421_regulator_info *info = rdev_get_drvdata(rdev);
-	u32 new_mode;
+	unsigned int new_mode;
 
 	switch (mode) {
 	case REGULATOR_MODE_NORMAL:
@@ -435,7 +435,7 @@ static int hi6421_regulator_buck_set_mode(struct regulator_dev *rdev,
 						unsigned int mode)
 {
 	struct hi6421_regulator_info *info = rdev_get_drvdata(rdev);
-	u32 new_mode;
+	unsigned int new_mode;
 
 	switch (mode) {
 	case REGULATOR_MODE_NORMAL:
-- 
cgit v1.2.3-59-g8ed1b


From d83f778c627ad4e80bd82dbc88ffa1b1b18876bb Mon Sep 17 00:00:00 2001
From: Sergey Larin <cerg2010cerg2010@mail.ru>
Date: Fri, 18 Jun 2021 17:16:06 +0300
Subject: regulator: max8893: add regulator driver

MAX8893 is a simple regulator which can be found on some of Sasmsung
phones.

Signed-off-by: Sergey Larin <cerg2010cerg2010@mail.ru>
Link: https://lore.kernel.org/r/20210618141607.884-1-cerg2010cerg2010@mail.ru
Signed-off-by: Mark Brown <broonie@kernel.org>
---
 drivers/regulator/Kconfig   |   7 ++
 drivers/regulator/Makefile  |   1 +
 drivers/regulator/max8893.c | 183 ++++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 191 insertions(+)
 create mode 100644 drivers/regulator/max8893.c

(limited to 'drivers/regulator')

diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
index a69b546872c1..7c39570b99b0 100644
--- a/drivers/regulator/Kconfig
+++ b/drivers/regulator/Kconfig
@@ -578,6 +578,13 @@ config REGULATOR_MAX8660
 	  This driver controls a Maxim 8660/8661 voltage output
 	  regulator via I2C bus.
 
+config REGULATOR_MAX8893
+	tristate "Maxim 8893 voltage regulator"
+	depends on I2C
+	help
+	  This driver controls a Maxim 8893 voltage output
+	  regulator via I2C bus.
+
 config REGULATOR_MAX8907
 	tristate "Maxim 8907 voltage regulator"
 	depends on MFD_MAX8907 || COMPILE_TEST
diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile
index 028f2b8788db..2f072544285a 100644
--- a/drivers/regulator/Makefile
+++ b/drivers/regulator/Makefile
@@ -71,6 +71,7 @@ obj-$(CONFIG_REGULATOR_MAX77620) += max77620-regulator.o
 obj-$(CONFIG_REGULATOR_MAX77650) += max77650-regulator.o
 obj-$(CONFIG_REGULATOR_MAX8649)	+= max8649.o
 obj-$(CONFIG_REGULATOR_MAX8660) += max8660.o
+obj-$(CONFIG_REGULATOR_MAX8893) += max8893.o
 obj-$(CONFIG_REGULATOR_MAX8907) += max8907-regulator.o
 obj-$(CONFIG_REGULATOR_MAX8925) += max8925-regulator.o
 obj-$(CONFIG_REGULATOR_MAX8952) += max8952.o
diff --git a/drivers/regulator/max8893.c b/drivers/regulator/max8893.c
new file mode 100644
index 000000000000..1519bf760da7
--- /dev/null
+++ b/drivers/regulator/max8893.c
@@ -0,0 +1,183 @@
+// SPDX-License-Identifier: GPL-2.0+
+#include <linux/module.h>
+#include <linux/i2c.h>
+#include <linux/of.h>
+#include <linux/regmap.h>
+#include <linux/regulator/driver.h>
+
+static const struct regulator_ops max8893_ops = {
+	.is_enabled		= regulator_is_enabled_regmap,
+	.enable			= regulator_enable_regmap,
+	.disable		= regulator_disable_regmap,
+	.get_voltage_sel	= regulator_get_voltage_sel_regmap,
+	.set_voltage_sel	= regulator_set_voltage_sel_regmap,
+	.list_voltage		= regulator_list_voltage_linear,
+	.map_voltage		= regulator_map_voltage_linear,
+};
+
+static const struct regulator_desc max8893_regulators[] = {
+	{
+		.name = "BUCK",
+		.supply_name = "in-buck",
+		.of_match = of_match_ptr("buck"),
+		.regulators_node = of_match_ptr("regulators"),
+		.n_voltages = 0x11,
+		.id = 6,
+		.ops = &max8893_ops,
+		.type = REGULATOR_VOLTAGE,
+		.owner = THIS_MODULE,
+		.min_uV = 800000,
+		.uV_step = 100000,
+		.vsel_reg = 0x4,
+		.vsel_mask = 0x1f,
+		.enable_reg = 0x0,
+		.enable_mask = BIT(7),
+	},
+	{
+		.name = "LDO1",
+		.supply_name = "in-ldo1",
+		.of_match = of_match_ptr("ldo1"),
+		.regulators_node = of_match_ptr("regulators"),
+		.n_voltages = 0x12,
+		.id = 1,
+		.ops = &max8893_ops,
+		.type = REGULATOR_VOLTAGE,
+		.owner = THIS_MODULE,
+		.min_uV = 1600000,
+		.uV_step = 100000,
+		.vsel_reg = 0x5,
+		.vsel_mask = 0x1f,
+		.enable_reg = 0x0,
+		.enable_mask = BIT(5),
+	},
+	{
+		.name = "LDO2",
+		.supply_name = "in-ldo2",
+		.of_match = of_match_ptr("ldo2"),
+		.regulators_node = of_match_ptr("regulators"),
+		.n_voltages = 0x16,
+		.id = 2,
+		.ops = &max8893_ops,
+		.type = REGULATOR_VOLTAGE,
+		.owner = THIS_MODULE,
+		.min_uV = 1200000,
+		.uV_step = 100000,
+		.vsel_reg = 0x6,
+		.vsel_mask = 0x1f,
+		.enable_reg = 0x0,
+		.enable_mask = BIT(4),
+	},
+	{
+		.name = "LDO3",
+		.supply_name = "in-ldo3",
+		.of_match = of_match_ptr("ldo3"),
+		.regulators_node = of_match_ptr("regulators"),
+		.n_voltages = 0x12,
+		.id = 3,
+		.ops = &max8893_ops,
+		.type = REGULATOR_VOLTAGE,
+		.owner = THIS_MODULE,
+		.min_uV = 1600000,
+		.uV_step = 100000,
+		.vsel_reg = 0x7,
+		.vsel_mask = 0x1f,
+		.enable_reg = 0x0,
+		.enable_mask = BIT(3),
+	},
+	{
+		.name = "LDO4",
+		.supply_name = "in-ldo4",
+		.of_match = of_match_ptr("ldo4"),
+		.regulators_node = of_match_ptr("regulators"),
+		.n_voltages = 0x1a,
+		.id = 4,
+		.ops = &max8893_ops,
+		.type = REGULATOR_VOLTAGE,
+		.owner = THIS_MODULE,
+		.min_uV = 800000,
+		.uV_step = 100000,
+		.vsel_reg = 0x8,
+		.vsel_mask = 0x1f,
+		.enable_reg = 0x0,
+		.enable_mask = BIT(2),
+	},
+	{
+		.name = "LDO5",
+		.supply_name = "in-ldo5",
+		.of_match = of_match_ptr("ldo5"),
+		.regulators_node = of_match_ptr("regulators"),
+		.n_voltages = 0x1a,
+		.id = 5,
+		.ops = &max8893_ops,
+		.type = REGULATOR_VOLTAGE,
+		.owner = THIS_MODULE,
+		.min_uV = 800000,
+		.uV_step = 100000,
+		.vsel_reg = 0x9,
+		.vsel_mask = 0x1f,
+		.enable_reg = 0x0,
+		.enable_mask = BIT(1),
+	}
+};
+
+static const struct regmap_config max8893_regmap = {
+	.reg_bits = 8,
+	.val_bits = 8,
+};
+
+static int max8893_probe_new(struct i2c_client *i2c)
+{
+	int id, ret;
+	struct regulator_config config = {.dev = &i2c->dev};
+	struct regmap *regmap = devm_regmap_init_i2c(i2c, &max8893_regmap);
+
+	if (IS_ERR(regmap)) {
+		ret = PTR_ERR(regmap);
+		dev_err(&i2c->dev, "regmap init failed: %d\n", ret);
+		return ret;
+	}
+
+	for (id = 0; id < ARRAY_SIZE(max8893_regulators); id++) {
+		struct regulator_dev *rdev;
+		rdev = devm_regulator_register(&i2c->dev,
+					       &max8893_regulators[id],
+					       &config);
+		if (IS_ERR(rdev)) {
+			ret = PTR_ERR(rdev);
+			dev_err(&i2c->dev, "failed to register %s: %d\n",
+				max8893_regulators[id].name, ret);
+			return ret;
+		}
+	}
+
+	return 0;
+}
+
+#ifdef CONFIG_OF
+static const struct of_device_id max8893_dt_match[] = {
+	{ .compatible = "maxim,max8893" },
+	{ /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(of, max8893_dt_match);
+#endif
+
+static const struct i2c_device_id max8893_ids[] = {
+	{ "max8893", 0 },
+	{ },
+};
+MODULE_DEVICE_TABLE(i2c, max8893_ids);
+
+static struct i2c_driver max8893_driver = {
+	.probe_new	= max8893_probe_new,
+	.driver		= {
+		.name	= "max8893",
+		.of_match_table = of_match_ptr(max8893_dt_match),
+	},
+	.id_table	= max8893_ids,
+};
+
+module_i2c_driver(max8893_driver);
+
+MODULE_DESCRIPTION("Maxim MAX8893 PMIC driver");
+MODULE_AUTHOR("Sergey Larin <cerg2010cerg2010@mail.ru>");
+MODULE_LICENSE("GPL");
-- 
cgit v1.2.3-59-g8ed1b


From 57c045bc727001c43b6a65adb0418aa7b3e6dbd0 Mon Sep 17 00:00:00 2001
From: Axel Lin <axel.lin@ingics.com>
Date: Sat, 19 Jun 2021 20:34:23 +0800
Subject: regulator: hi6421v600: Fix setting idle mode

commit db27f8294cd7 changed eco_mode << (ffs(sreg->eco_mode_mask) - 1)
to sreg->eco_mode_mask << (ffs(sreg->eco_mode_mask) - 1) which is wrong.
Fix it by simply set val = sreg->eco_mode_mask.

In additional, sreg->eco_mode_mask can be 0 (LDO3, LDO33, LDO34).
Return -EINVAL if idle mode is not supported when sreg->eco_mode_mask is 0.

While at it, also use unsigned int for reg_val/val which is the expected
type for regmap_read and regmap_update_bits.

Fixes: db27f8294cd7 ("staging: regulator: hi6421v600-regulator: use shorter names for OF properties")
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Link: https://lore.kernel.org/r/20210619123423.4091429-1-axel.lin@ingics.com
Signed-off-by: Mark Brown <broonie@kernel.org>
---
 drivers/regulator/hi6421v600-regulator.c | 9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)

(limited to 'drivers/regulator')

diff --git a/drivers/regulator/hi6421v600-regulator.c b/drivers/regulator/hi6421v600-regulator.c
index 417cf5b4a1c3..cf14109d486f 100644
--- a/drivers/regulator/hi6421v600-regulator.c
+++ b/drivers/regulator/hi6421v600-regulator.c
@@ -117,7 +117,7 @@ static int hi6421_spmi_regulator_enable(struct regulator_dev *rdev)
 static unsigned int hi6421_spmi_regulator_get_mode(struct regulator_dev *rdev)
 {
 	struct hi6421_spmi_reg_info *sreg = rdev_get_drvdata(rdev);
-	u32 reg_val;
+	unsigned int reg_val;
 
 	regmap_read(rdev->regmap, rdev->desc->enable_reg, &reg_val);
 
@@ -131,14 +131,17 @@ static int hi6421_spmi_regulator_set_mode(struct regulator_dev *rdev,
 					  unsigned int mode)
 {
 	struct hi6421_spmi_reg_info *sreg = rdev_get_drvdata(rdev);
-	u32 val;
+	unsigned int val;
 
 	switch (mode) {
 	case REGULATOR_MODE_NORMAL:
 		val = 0;
 		break;
 	case REGULATOR_MODE_IDLE:
-		val = sreg->eco_mode_mask << (ffs(sreg->eco_mode_mask) - 1);
+		if (!sreg->eco_mode_mask)
+			return -EINVAL;
+
+		val = sreg->eco_mode_mask;
 		break;
 	default:
 		return -EINVAL;
-- 
cgit v1.2.3-59-g8ed1b


From 157d2230193ae683fcffcc1cd0a2c3aa4479955f Mon Sep 17 00:00:00 2001
From: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Date: Thu, 3 Jun 2021 08:41:37 +0300
Subject: regulator: move rdev_print helpers to internal.h

The rdev print helpers are a nice way to print messages related to a
specific regulator device. Move them from core.c to internal.h

As the rdev print helpers use rdev_get_name() export it from core.c. Also
move the declaration from coupler.h to driver.h because the rdev name is
not just a coupled regulator property. I guess the main audience for
rdev_get_name() will be the regulator core and drivers.

Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Link: https://lore.kernel.org/r/dc7fd70dc31de4d0e820b7646bb78eeb04f80735.1622628333.git.matti.vaittinen@fi.rohmeurope.com
Signed-off-by: Mark Brown <broonie@kernel.org>
---
 drivers/regulator/core.c          | 12 +-----------
 drivers/regulator/internal.h      | 11 +++++++++++
 include/linux/regulator/coupler.h |  5 -----
 include/linux/regulator/driver.h  | 10 ++++++++++
 4 files changed, 22 insertions(+), 16 deletions(-)

(limited to 'drivers/regulator')

diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c
index f192bf19492e..a8188f7e5072 100644
--- a/drivers/regulator/core.c
+++ b/drivers/regulator/core.c
@@ -33,17 +33,6 @@
 #include "dummy.h"
 #include "internal.h"
 
-#define rdev_crit(rdev, fmt, ...)					\
-	pr_crit("%s: " fmt, rdev_get_name(rdev), ##__VA_ARGS__)
-#define rdev_err(rdev, fmt, ...)					\
-	pr_err("%s: " fmt, rdev_get_name(rdev), ##__VA_ARGS__)
-#define rdev_warn(rdev, fmt, ...)					\
-	pr_warn("%s: " fmt, rdev_get_name(rdev), ##__VA_ARGS__)
-#define rdev_info(rdev, fmt, ...)					\
-	pr_info("%s: " fmt, rdev_get_name(rdev), ##__VA_ARGS__)
-#define rdev_dbg(rdev, fmt, ...)					\
-	pr_debug("%s: " fmt, rdev_get_name(rdev), ##__VA_ARGS__)
-
 static DEFINE_WW_CLASS(regulator_ww_class);
 static DEFINE_MUTEX(regulator_nesting_mutex);
 static DEFINE_MUTEX(regulator_list_mutex);
@@ -117,6 +106,7 @@ const char *rdev_get_name(struct regulator_dev *rdev)
 	else
 		return "";
 }
+EXPORT_SYMBOL_GPL(rdev_get_name);
 
 static bool have_full_constraints(void)
 {
diff --git a/drivers/regulator/internal.h b/drivers/regulator/internal.h
index 2391b565ef11..1e9c71642143 100644
--- a/drivers/regulator/internal.h
+++ b/drivers/regulator/internal.h
@@ -15,6 +15,17 @@
 
 #define REGULATOR_STATES_NUM	(PM_SUSPEND_MAX + 1)
 
+#define rdev_crit(rdev, fmt, ...)					\
+	pr_crit("%s: " fmt, rdev_get_name(rdev), ##__VA_ARGS__)
+#define rdev_err(rdev, fmt, ...)					\
+	pr_err("%s: " fmt, rdev_get_name(rdev), ##__VA_ARGS__)
+#define rdev_warn(rdev, fmt, ...)					\
+	pr_warn("%s: " fmt, rdev_get_name(rdev), ##__VA_ARGS__)
+#define rdev_info(rdev, fmt, ...)					\
+	pr_info("%s: " fmt, rdev_get_name(rdev), ##__VA_ARGS__)
+#define rdev_dbg(rdev, fmt, ...)					\
+	pr_debug("%s: " fmt, rdev_get_name(rdev), ##__VA_ARGS__)
+
 struct regulator_voltage {
 	int min_uV;
 	int max_uV;
diff --git a/include/linux/regulator/coupler.h b/include/linux/regulator/coupler.h
index 5f86824bd117..73291f280a23 100644
--- a/include/linux/regulator/coupler.h
+++ b/include/linux/regulator/coupler.h
@@ -52,7 +52,6 @@ struct regulator_coupler {
 
 #ifdef CONFIG_REGULATOR
 int regulator_coupler_register(struct regulator_coupler *coupler);
-const char *rdev_get_name(struct regulator_dev *rdev);
 int regulator_check_consumers(struct regulator_dev *rdev,
 			      int *min_uV, int *max_uV,
 			      suspend_state_t state);
@@ -69,10 +68,6 @@ static inline int regulator_coupler_register(struct regulator_coupler *coupler)
 {
 	return 0;
 }
-static inline const char *rdev_get_name(struct regulator_dev *rdev)
-{
-	return NULL;
-}
 static inline int regulator_check_consumers(struct regulator_dev *rdev,
 					    int *min_uV, int *max_uV,
 					    suspend_state_t state)
diff --git a/include/linux/regulator/driver.h b/include/linux/regulator/driver.h
index 4ea520c248e9..7ec0fa79d1a8 100644
--- a/include/linux/regulator/driver.h
+++ b/include/linux/regulator/driver.h
@@ -550,4 +550,14 @@ int regulator_desc_list_voltage_linear_range(const struct regulator_desc *desc,
 
 int regulator_desc_list_voltage_linear(const struct regulator_desc *desc,
 				       unsigned int selector);
+
+#ifdef CONFIG_REGULATOR
+const char *rdev_get_name(struct regulator_dev *rdev);
+#else
+static inline const char *rdev_get_name(struct regulator_dev *rdev)
+{
+	return NULL;
+}
+#endif
+
 #endif
-- 
cgit v1.2.3-59-g8ed1b


From 7111c6d1b31b42c8c758f6681e895a5116e3bad6 Mon Sep 17 00:00:00 2001
From: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Date: Thu, 3 Jun 2021 08:41:55 +0300
Subject: regulator: IRQ based event/error notification helpers

Provide helper function for IC's implementing regulator notifications
when an IRQ fires. The helper also works for IRQs which can not be acked.
Helper can be set to disable the IRQ at handler and then re-enabling it
on delayed work later. The helper also adds regulator_get_error_flags()
errors in cache for the duration of IRQ disabling.

Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/ebdf86d8c22b924667ec2385330e30fcbfac0119.1622628334.git.matti.vaittinen@fi.rohmeurope.com
Signed-off-by: Mark Brown <broonie@kernel.org>
---
 drivers/regulator/Makefile       |   2 +-
 drivers/regulator/core.c         |  29 ++-
 drivers/regulator/devres.c       |  52 +++++
 drivers/regulator/irq_helpers.c  | 397 +++++++++++++++++++++++++++++++++++++++
 include/linux/regulator/driver.h | 135 +++++++++++++
 5 files changed, 607 insertions(+), 8 deletions(-)
 create mode 100644 drivers/regulator/irq_helpers.c

(limited to 'drivers/regulator')

diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile
index 580b015296ea..534fc0163bc4 100644
--- a/drivers/regulator/Makefile
+++ b/drivers/regulator/Makefile
@@ -4,7 +4,7 @@
 #
 
 
-obj-$(CONFIG_REGULATOR) += core.o dummy.o fixed-helper.o helpers.o devres.o
+obj-$(CONFIG_REGULATOR) += core.o dummy.o fixed-helper.o helpers.o devres.o irq_helpers.o
 obj-$(CONFIG_OF) += of_regulator.o
 obj-$(CONFIG_REGULATOR_FIXED_VOLTAGE) += fixed.o
 obj-$(CONFIG_REGULATOR_VIRTUAL_CONSUMER) += virtual.o
diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c
index a8188f7e5072..85b6d3960369 100644
--- a/drivers/regulator/core.c
+++ b/drivers/regulator/core.c
@@ -4370,22 +4370,36 @@ unsigned int regulator_get_mode(struct regulator *regulator)
 }
 EXPORT_SYMBOL_GPL(regulator_get_mode);
 
+static int rdev_get_cached_err_flags(struct regulator_dev *rdev)
+{
+	int ret = 0;
+
+	if (rdev->use_cached_err) {
+		spin_lock(&rdev->err_lock);
+		ret = rdev->cached_err;
+		spin_unlock(&rdev->err_lock);
+	}
+	return ret;
+}
+
 static int _regulator_get_error_flags(struct regulator_dev *rdev,
 					unsigned int *flags)
 {
-	int ret;
+	int cached_flags, ret = 0;
 
 	regulator_lock(rdev);
 
-	/* sanity check */
-	if (!rdev->desc->ops->get_error_flags) {
+	cached_flags = rdev_get_cached_err_flags(rdev);
+
+	if (rdev->desc->ops->get_error_flags)
+		ret = rdev->desc->ops->get_error_flags(rdev, flags);
+	else if (!rdev->use_cached_err)
 		ret = -EINVAL;
-		goto out;
-	}
 
-	ret = rdev->desc->ops->get_error_flags(rdev, flags);
-out:
+	*flags |= cached_flags;
+
 	regulator_unlock(rdev);
+
 	return ret;
 }
 
@@ -5218,6 +5232,7 @@ regulator_register(const struct regulator_desc *regulator_desc,
 		goto rinse;
 	}
 	device_initialize(&rdev->dev);
+	spin_lock_init(&rdev->err_lock);
 
 	/*
 	 * Duplicate the config so the driver could override it after
diff --git a/drivers/regulator/devres.c b/drivers/regulator/devres.c
index 3091210889e3..a8de0aa88bad 100644
--- a/drivers/regulator/devres.c
+++ b/drivers/regulator/devres.c
@@ -481,3 +481,55 @@ void devm_regulator_unregister_notifier(struct regulator *regulator,
 		WARN_ON(rc);
 }
 EXPORT_SYMBOL_GPL(devm_regulator_unregister_notifier);
+
+static void regulator_irq_helper_drop(void *res)
+{
+	regulator_irq_helper_cancel(&res);
+}
+
+/**
+ * devm_regulator_irq_helper - resource managed registration of IRQ based
+ * regulator event/error notifier
+ *
+ * @dev:		device to which lifetime the helper's lifetime is
+ *			bound.
+ * @d:			IRQ helper descriptor.
+ * @irq:		IRQ used to inform events/errors to be notified.
+ * @irq_flags:		Extra IRQ flags to be OR'ed with the default
+ *			IRQF_ONESHOT when requesting the (threaded) irq.
+ * @common_errs:	Errors which can be flagged by this IRQ for all rdevs.
+ *			When IRQ is re-enabled these errors will be cleared
+ *			from all associated regulators
+ * @per_rdev_errs:	Optional error flag array describing errors specific
+ *			for only some of the regulators. These errors will be
+ *			or'ed with common errors. If this is given the array
+ *			should contain rdev_amount flags. Can be set to NULL
+ *			if there is no regulator specific error flags for this
+ *			IRQ.
+ * @rdev:		Array of pointers to regulators associated with this
+ *			IRQ.
+ * @rdev_amount:	Amount of regulators associated with this IRQ.
+ *
+ * Return: handle to irq_helper or an ERR_PTR() encoded error code.
+ */
+void *devm_regulator_irq_helper(struct device *dev,
+				const struct regulator_irq_desc *d, int irq,
+				int irq_flags, int common_errs,
+				int *per_rdev_errs,
+				struct regulator_dev **rdev, int rdev_amount)
+{
+	void *ptr;
+	int ret;
+
+	ptr = regulator_irq_helper(dev, d, irq, irq_flags, common_errs,
+				    per_rdev_errs, rdev, rdev_amount);
+	if (IS_ERR(ptr))
+		return ptr;
+
+	ret = devm_add_action_or_reset(dev, regulator_irq_helper_drop, ptr);
+	if (ret)
+		return ERR_PTR(ret);
+
+	return ptr;
+}
+EXPORT_SYMBOL_GPL(devm_regulator_irq_helper);
diff --git a/drivers/regulator/irq_helpers.c b/drivers/regulator/irq_helpers.c
new file mode 100644
index 000000000000..fabe2e53093e
--- /dev/null
+++ b/drivers/regulator/irq_helpers.c
@@ -0,0 +1,397 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (C) 2021 ROHM Semiconductors
+// regulator IRQ based event notification helpers
+//
+// Logic has been partially adapted from qcom-labibb driver.
+//
+// Author: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
+
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/reboot.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+#include <linux/regulator/driver.h>
+
+#include "internal.h"
+
+#define REGULATOR_FORCED_SAFETY_SHUTDOWN_WAIT_MS 10000
+
+struct regulator_irq {
+	struct regulator_irq_data rdata;
+	struct regulator_irq_desc desc;
+	int irq;
+	int retry_cnt;
+	struct delayed_work isr_work;
+};
+
+/*
+ * Should only be called from threaded handler to prevent potential deadlock
+ */
+static void rdev_flag_err(struct regulator_dev *rdev, int err)
+{
+	spin_lock(&rdev->err_lock);
+	rdev->cached_err |= err;
+	spin_unlock(&rdev->err_lock);
+}
+
+static void rdev_clear_err(struct regulator_dev *rdev, int err)
+{
+	spin_lock(&rdev->err_lock);
+	rdev->cached_err &= ~err;
+	spin_unlock(&rdev->err_lock);
+}
+
+static void regulator_notifier_isr_work(struct work_struct *work)
+{
+	struct regulator_irq *h;
+	struct regulator_irq_desc *d;
+	struct regulator_irq_data *rid;
+	int ret = 0;
+	int tmo, i;
+	int num_rdevs;
+
+	h = container_of(work, struct regulator_irq,
+			    isr_work.work);
+	d = &h->desc;
+	rid = &h->rdata;
+	num_rdevs = rid->num_states;
+
+reread:
+	if (d->fatal_cnt && h->retry_cnt > d->fatal_cnt) {
+		if (!d->die)
+			return hw_protection_shutdown("Regulator HW failure? - no IC recovery",
+						      REGULATOR_FORCED_SAFETY_SHUTDOWN_WAIT_MS);
+		ret = d->die(rid);
+		/*
+		 * If the 'last resort' IC recovery failed we will have
+		 * nothing else left to do...
+		 */
+		if (ret)
+			return hw_protection_shutdown("Regulator HW failure. IC recovery failed",
+						      REGULATOR_FORCED_SAFETY_SHUTDOWN_WAIT_MS);
+
+		/*
+		 * If h->die() was implemented we assume recovery has been
+		 * attempted (probably regulator was shut down) and we
+		 * just enable IRQ and bail-out.
+		 */
+		goto enable_out;
+	}
+	if (d->renable) {
+		ret = d->renable(rid);
+
+		if (ret == REGULATOR_FAILED_RETRY) {
+			/* Driver could not get current status */
+			h->retry_cnt++;
+			if (!d->reread_ms)
+				goto reread;
+
+			tmo = d->reread_ms;
+			goto reschedule;
+		}
+
+		if (ret) {
+			/*
+			 * IC status reading succeeded. update error info
+			 * just in case the renable changed it.
+			 */
+			for (i = 0; i < num_rdevs; i++) {
+				struct regulator_err_state *stat;
+				struct regulator_dev *rdev;
+
+				stat = &rid->states[i];
+				rdev = stat->rdev;
+				rdev_clear_err(rdev, (~stat->errors) &
+						      stat->possible_errs);
+			}
+			h->retry_cnt++;
+			/*
+			 * The IC indicated problem is still ON - no point in
+			 * re-enabling the IRQ. Retry later.
+			 */
+			tmo = d->irq_off_ms;
+			goto reschedule;
+		}
+	}
+
+	/*
+	 * Either IC reported problem cleared or no status checker was provided.
+	 * If problems are gone - good. If not - then the IRQ will fire again
+	 * and we'll have a new nice loop. In any case we should clear error
+	 * flags here and re-enable IRQs.
+	 */
+	for (i = 0; i < num_rdevs; i++) {
+		struct regulator_err_state *stat;
+		struct regulator_dev *rdev;
+
+		stat = &rid->states[i];
+		rdev = stat->rdev;
+		rdev_clear_err(rdev, stat->possible_errs);
+	}
+
+	/*
+	 * Things have been seemingly successful => zero retry-counter.
+	 */
+	h->retry_cnt = 0;
+
+enable_out:
+	enable_irq(h->irq);
+
+	return;
+
+reschedule:
+	if (!d->high_prio)
+		mod_delayed_work(system_wq, &h->isr_work,
+				 msecs_to_jiffies(tmo));
+	else
+		mod_delayed_work(system_highpri_wq, &h->isr_work,
+				 msecs_to_jiffies(tmo));
+}
+
+static irqreturn_t regulator_notifier_isr(int irq, void *data)
+{
+	struct regulator_irq *h = data;
+	struct regulator_irq_desc *d;
+	struct regulator_irq_data *rid;
+	unsigned long rdev_map = 0;
+	int num_rdevs;
+	int ret, i;
+
+	d = &h->desc;
+	rid = &h->rdata;
+	num_rdevs = rid->num_states;
+
+	if (d->fatal_cnt)
+		h->retry_cnt++;
+
+	/*
+	 * we spare a few cycles by not clearing statuses prior to this call.
+	 * The IC driver must initialize the status buffers for rdevs
+	 * which it indicates having active events via rdev_map.
+	 *
+	 * Maybe we should just to be on a safer side(?)
+	 */
+	ret = d->map_event(irq, rid, &rdev_map);
+
+	/*
+	 * If status reading fails (which is unlikely) we don't ack/disable
+	 * IRQ but just increase fail count and retry when IRQ fires again.
+	 * If retry_count exceeds the given safety limit we call IC specific die
+	 * handler which can try disabling regulator(s).
+	 *
+	 * If no die handler is given we will just bug() as a last resort.
+	 *
+	 * We could try disabling all associated rdevs - but we might shoot
+	 * ourselves in the head and leave the problematic regulator enabled. So
+	 * if IC has no die-handler populated we just assume the regulator
+	 * can't be disabled.
+	 */
+	if (unlikely(ret == REGULATOR_FAILED_RETRY))
+		goto fail_out;
+
+	h->retry_cnt = 0;
+	/*
+	 * Let's not disable IRQ if there were no status bits for us. We'd
+	 * better leave spurious IRQ handling to genirq
+	 */
+	if (ret || !rdev_map)
+		return IRQ_NONE;
+
+	/*
+	 * Some events are bogus if the regulator is disabled. Skip such events
+	 * if all relevant regulators are disabled
+	 */
+	if (d->skip_off) {
+		for_each_set_bit(i, &rdev_map, num_rdevs) {
+			struct regulator_dev *rdev;
+			const struct regulator_ops *ops;
+
+			rdev = rid->states[i].rdev;
+			ops = rdev->desc->ops;
+
+			/*
+			 * If any of the flagged regulators is enabled we do
+			 * handle this
+			 */
+			if (ops->is_enabled(rdev))
+				break;
+		}
+		if (i == num_rdevs)
+			return IRQ_NONE;
+	}
+
+	/* Disable IRQ if HW keeps line asserted */
+	if (d->irq_off_ms)
+		disable_irq_nosync(irq);
+
+	/*
+	 * IRQ seems to be for us. Let's fire correct notifiers / store error
+	 * flags
+	 */
+	for_each_set_bit(i, &rdev_map, num_rdevs) {
+		struct regulator_err_state *stat;
+		struct regulator_dev *rdev;
+
+		stat = &rid->states[i];
+		rdev = stat->rdev;
+
+		rdev_dbg(rdev, "Sending regulator notification EVT 0x%lx\n",
+			 stat->notifs);
+
+		regulator_notifier_call_chain(rdev, stat->notifs, NULL);
+		rdev_flag_err(rdev, stat->errors);
+	}
+
+	if (d->irq_off_ms) {
+		if (!d->high_prio)
+			schedule_delayed_work(&h->isr_work,
+					      msecs_to_jiffies(d->irq_off_ms));
+		else
+			mod_delayed_work(system_highpri_wq,
+					 &h->isr_work,
+					 msecs_to_jiffies(d->irq_off_ms));
+	}
+
+	return IRQ_HANDLED;
+
+fail_out:
+	if (d->fatal_cnt && h->retry_cnt > d->fatal_cnt) {
+		/* If we have no recovery, just try shut down straight away */
+		if (!d->die) {
+			hw_protection_shutdown("Regulator failure. Retry count exceeded",
+					       REGULATOR_FORCED_SAFETY_SHUTDOWN_WAIT_MS);
+		} else {
+			ret = d->die(rid);
+			/* If die() failed shut down as a last attempt to save the HW */
+			if (ret)
+				hw_protection_shutdown("Regulator failure. Recovery failed",
+						       REGULATOR_FORCED_SAFETY_SHUTDOWN_WAIT_MS);
+		}
+	}
+
+	return IRQ_NONE;
+}
+
+static int init_rdev_state(struct device *dev, struct regulator_irq *h,
+			   struct regulator_dev **rdev, int common_err,
+			   int *rdev_err, int rdev_amount)
+{
+	int i;
+
+	h->rdata.states = devm_kzalloc(dev, sizeof(*h->rdata.states) *
+				       rdev_amount, GFP_KERNEL);
+	if (!h->rdata.states)
+		return -ENOMEM;
+
+	h->rdata.num_states = rdev_amount;
+	h->rdata.data = h->desc.data;
+
+	for (i = 0; i < rdev_amount; i++) {
+		h->rdata.states[i].possible_errs = common_err;
+		if (rdev_err)
+			h->rdata.states[i].possible_errs |= *rdev_err++;
+		h->rdata.states[i].rdev = *rdev++;
+	}
+
+	return 0;
+}
+
+static void init_rdev_errors(struct regulator_irq *h)
+{
+	int i;
+
+	for (i = 0; i < h->rdata.num_states; i++)
+		if (h->rdata.states[i].possible_errs)
+			h->rdata.states[i].rdev->use_cached_err = true;
+}
+
+/**
+ * regulator_irq_helper - register IRQ based regulator event/error notifier
+ *
+ * @dev:		device providing the IRQs
+ * @d:			IRQ helper descriptor.
+ * @irq:		IRQ used to inform events/errors to be notified.
+ * @irq_flags:		Extra IRQ flags to be OR'ed with the default
+ *			IRQF_ONESHOT when requesting the (threaded) irq.
+ * @common_errs:	Errors which can be flagged by this IRQ for all rdevs.
+ *			When IRQ is re-enabled these errors will be cleared
+ *			from all associated regulators
+ * @per_rdev_errs:	Optional error flag array describing errors specific
+ *			for only some of the regulators. These errors will be
+ *			or'ed with common errors. If this is given the array
+ *			should contain rdev_amount flags. Can be set to NULL
+ *			if there is no regulator specific error flags for this
+ *			IRQ.
+ * @rdev:		Array of pointers to regulators associated with this
+ *			IRQ.
+ * @rdev_amount:	Amount of regulators associated with this IRQ.
+ *
+ * Return: handle to irq_helper or an ERR_PTR() encoded error code.
+ */
+void *regulator_irq_helper(struct device *dev,
+			   const struct regulator_irq_desc *d, int irq,
+			   int irq_flags, int common_errs, int *per_rdev_errs,
+			   struct regulator_dev **rdev, int rdev_amount)
+{
+	struct regulator_irq *h;
+	int ret;
+
+	if (!rdev_amount || !d || !d->map_event || !d->name)
+		return ERR_PTR(-EINVAL);
+
+	h = devm_kzalloc(dev, sizeof(*h), GFP_KERNEL);
+	if (!h)
+		return ERR_PTR(-ENOMEM);
+
+	h->irq = irq;
+	h->desc = *d;
+
+	ret = init_rdev_state(dev, h, rdev, common_errs, per_rdev_errs,
+			      rdev_amount);
+	if (ret)
+		return ERR_PTR(ret);
+
+	init_rdev_errors(h);
+
+	if (h->desc.irq_off_ms)
+		INIT_DELAYED_WORK(&h->isr_work, regulator_notifier_isr_work);
+
+	ret = request_threaded_irq(h->irq, NULL, regulator_notifier_isr,
+				   IRQF_ONESHOT | irq_flags, h->desc.name, h);
+	if (ret) {
+		dev_err(dev, "Failed to request IRQ %d\n", irq);
+
+		return ERR_PTR(ret);
+	}
+
+	return h;
+}
+EXPORT_SYMBOL_GPL(regulator_irq_helper);
+
+/**
+ * regulator_irq_helper_cancel - drop IRQ based regulator event/error notifier
+ *
+ * @handle:		Pointer to handle returned by a successful call to
+ *			regulator_irq_helper(). Will be NULLed upon return.
+ *
+ * The associated IRQ is released and work is cancelled when the function
+ * returns.
+ */
+void regulator_irq_helper_cancel(void **handle)
+{
+	if (handle && *handle) {
+		struct regulator_irq *h = *handle;
+
+		free_irq(h->irq, h);
+		if (h->desc.irq_off_ms)
+			cancel_delayed_work_sync(&h->isr_work);
+
+		h = NULL;
+	}
+}
+EXPORT_SYMBOL_GPL(regulator_irq_helper_cancel);
diff --git a/include/linux/regulator/driver.h b/include/linux/regulator/driver.h
index 7ec0fa79d1a8..1d1a8951e740 100644
--- a/include/linux/regulator/driver.h
+++ b/include/linux/regulator/driver.h
@@ -413,6 +413,128 @@ struct regulator_config {
 	struct gpio_desc *ena_gpiod;
 };
 
+/**
+ * struct regulator_err_state - regulator error/notification status
+ *
+ * @rdev:		Regulator which status the struct indicates.
+ * @notifs:		Events which have occurred on the regulator.
+ * @errors:		Errors which are active on the regulator.
+ * @possible_errs:	Errors which can be signaled (by given IRQ).
+ */
+struct regulator_err_state {
+	struct regulator_dev *rdev;
+	unsigned long notifs;
+	unsigned long errors;
+	int possible_errs;
+};
+
+/**
+ * struct regulator_irq_data - regulator error/notification status date
+ *
+ * @states:	Status structs for each of the associated regulators.
+ * @num_states:	Amount of associated regulators.
+ * @data:	Driver data pointer given at regulator_irq_desc.
+ * @opaque:	Value storage for IC driver. Core does not update this. ICs
+ *		may want to store status register value here at map_event and
+ *		compare contents at 'renable' callback to see if new problems
+ *		have been added to status. If that is the case it may be
+ *		desirable to return REGULATOR_ERROR_CLEARED and not
+ *		REGULATOR_ERROR_ON to allow IRQ fire again and to generate
+ *		notifications also for the new issues.
+ *
+ * This structure is passed to 'map_event' and 'renable' callbacks for
+ * reporting regulator status to core.
+ */
+struct regulator_irq_data {
+	struct regulator_err_state *states;
+	int num_states;
+	void *data;
+	long opaque;
+};
+
+/**
+ * struct regulator_irq_desc - notification sender for IRQ based events.
+ *
+ * @name:	The visible name for the IRQ
+ * @fatal_cnt:	If this IRQ is used to signal HW damaging condition it may be
+ *		best to shut-down regulator(s) or reboot the SOC if error
+ *		handling is repeatedly failing. If fatal_cnt is given the IRQ
+ *		handling is aborted if it fails for fatal_cnt times and die()
+ *		callback (if populated) or BUG() is called to try to prevent
+ *		further damage.
+ * @reread_ms:	The time which is waited before attempting to re-read status
+ *		at the worker if IC reading fails. Immediate re-read is done
+ *		if time is not specified.
+ * @irq_off_ms:	The time which IRQ is kept disabled before re-evaluating the
+ *		status for devices which keep IRQ disabled for duration of the
+ *		error. If this is not given the IRQ is left enabled and renable
+ *		is not called.
+ * @skip_off:	If set to true the IRQ handler will attempt to check if any of
+ *		the associated regulators are enabled prior to taking other
+ *		actions. If no regulators are enabled and this is set to true
+ *		a spurious IRQ is assumed and IRQ_NONE is returned.
+ * @high_prio:	Boolean to indicate that high priority WQ should be used.
+ * @data:	Driver private data pointer which will be passed as such to
+ *		the renable, map_event and die callbacks in regulator_irq_data.
+ * @die:	Protection callback. If IC status reading or recovery actions
+ *		fail fatal_cnt times this callback or BUG() is called. This
+ *		callback should implement a final protection attempt like
+ *		disabling the regulator. If protection succeeded this may
+ *		return 0. If anything else is returned the core assumes final
+ *		protection failed and calls BUG() as a last resort.
+ * @map_event:	Driver callback to map IRQ status into regulator devices with
+ *		events / errors. NOTE: callback MUST initialize both the
+ *		errors and notifs for all rdevs which it signals having
+ *		active events as core does not clean the map data.
+ *		REGULATOR_FAILED_RETRY can be returned to indicate that the
+ *		status reading from IC failed. If this is repeated for
+ *		fatal_cnt times the core will call die() callback or BUG()
+ *		as a last resort to protect the HW.
+ * @renable:	Optional callback to check status (if HW supports that) before
+ *		re-enabling IRQ. If implemented this should clear the error
+ *		flags so that errors fetched by regulator_get_error_flags()
+ *		are updated. If callback is not implemented then errors are
+ *		assumed to be cleared and IRQ is re-enabled.
+ *		REGULATOR_FAILED_RETRY can be returned to
+ *		indicate that the status reading from IC failed. If this is
+ *		repeated for 'fatal_cnt' times the core will call die()
+ *		callback or BUG() as a last resort to protect the HW.
+ *		Returning zero indicates that the problem in HW has been solved
+ *		and IRQ will be re-enabled. Returning REGULATOR_ERROR_ON
+ *		indicates the error condition is still active and keeps IRQ
+ *		disabled. Please note that returning REGULATOR_ERROR_ON does
+ *		not retrigger evaluating what events are active or resending
+ *		notifications. If this is needed you probably want to return
+ *		zero and allow IRQ to retrigger causing events to be
+ *		re-evaluated and re-sent.
+ *
+ * This structure is used for registering regulator IRQ notification helper.
+ */
+struct regulator_irq_desc {
+	const char *name;
+	int irq_flags;
+	int fatal_cnt;
+	int reread_ms;
+	int irq_off_ms;
+	bool skip_off;
+	bool high_prio;
+	void *data;
+
+	int (*die)(struct regulator_irq_data *rid);
+	int (*map_event)(int irq, struct regulator_irq_data *rid,
+			  unsigned long *dev_mask);
+	int (*renable)(struct regulator_irq_data *rid);
+};
+
+/*
+ * Return values for regulator IRQ helpers.
+ */
+enum {
+	REGULATOR_ERROR_CLEARED,
+	REGULATOR_FAILED_RETRY,
+	REGULATOR_ERROR_ON,
+};
+
 /*
  * struct coupling_desc
  *
@@ -477,6 +599,9 @@ struct regulator_dev {
 
 	/* time when this regulator was disabled last time */
 	ktime_t last_off;
+	int cached_err;
+	bool use_cached_err;
+	spinlock_t err_lock;
 };
 
 struct regulator_dev *
@@ -491,6 +616,16 @@ void devm_regulator_unregister(struct device *dev, struct regulator_dev *rdev);
 
 int regulator_notifier_call_chain(struct regulator_dev *rdev,
 				  unsigned long event, void *data);
+void *devm_regulator_irq_helper(struct device *dev,
+				const struct regulator_irq_desc *d, int irq,
+				int irq_flags, int common_errs,
+				int *per_rdev_errs, struct regulator_dev **rdev,
+				int rdev_amount);
+void *regulator_irq_helper(struct device *dev,
+			   const struct regulator_irq_desc *d, int irq,
+			   int irq_flags, int common_errs, int *per_rdev_errs,
+			   struct regulator_dev **rdev, int rdev_amount);
+void regulator_irq_helper_cancel(void **handle);
 
 void *rdev_get_drvdata(struct regulator_dev *rdev);
 struct device *rdev_get_dev(struct regulator_dev *rdev);
-- 
cgit v1.2.3-59-g8ed1b


From 89a6a5e56c8248a077d12424a1383a6b18ea840b Mon Sep 17 00:00:00 2001
From: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Date: Thu, 3 Jun 2021 08:42:12 +0300
Subject: regulator: add property parsing and callbacks to set protection
 limits

Add DT property parsing code and setting callback for regulator over/under
voltage, over-current and temperature error limits.

Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Link: https://lore.kernel.org/r/e7b8007ba9eae7076178bf3363fb942ccb1cc9a5.1622628334.git.matti.vaittinen@fi.rohmeurope.com
Signed-off-by: Mark Brown <broonie@kernel.org>
---
 drivers/regulator/core.c                  | 122 +++++++++++++++++++++++++++++-
 drivers/regulator/of_regulator.c          |  58 ++++++++++++++
 drivers/regulator/qcom-labibb-regulator.c |  10 ++-
 drivers/regulator/qcom_spmi-regulator.c   |   6 +-
 drivers/regulator/stpmic1_regulator.c     |  20 ++++-
 include/linux/regulator/driver.h          |  41 +++++++++-
 include/linux/regulator/machine.h         |  26 +++++++
 7 files changed, 274 insertions(+), 9 deletions(-)

(limited to 'drivers/regulator')

diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c
index 85b6d3960369..92fe05178249 100644
--- a/drivers/regulator/core.c
+++ b/drivers/regulator/core.c
@@ -1305,6 +1305,52 @@ static int machine_constraints_current(struct regulator_dev *rdev,
 
 static int _regulator_do_enable(struct regulator_dev *rdev);
 
+static int notif_set_limit(struct regulator_dev *rdev,
+			   int (*set)(struct regulator_dev *, int, int, bool),
+			   int limit, int severity)
+{
+	bool enable;
+
+	if (limit == REGULATOR_NOTIF_LIMIT_DISABLE) {
+		enable = false;
+		limit = 0;
+	} else {
+		enable = true;
+	}
+
+	if (limit == REGULATOR_NOTIF_LIMIT_ENABLE)
+		limit = 0;
+
+	return set(rdev, limit, severity, enable);
+}
+
+static int handle_notify_limits(struct regulator_dev *rdev,
+			int (*set)(struct regulator_dev *, int, int, bool),
+			struct notification_limit *limits)
+{
+	int ret = 0;
+
+	if (!set)
+		return -EOPNOTSUPP;
+
+	if (limits->prot)
+		ret = notif_set_limit(rdev, set, limits->prot,
+				      REGULATOR_SEVERITY_PROT);
+	if (ret)
+		return ret;
+
+	if (limits->err)
+		ret = notif_set_limit(rdev, set, limits->err,
+				      REGULATOR_SEVERITY_ERR);
+	if (ret)
+		return ret;
+
+	if (limits->warn)
+		ret = notif_set_limit(rdev, set, limits->warn,
+				      REGULATOR_SEVERITY_WARN);
+
+	return ret;
+}
 /**
  * set_machine_constraints - sets regulator constraints
  * @rdev: regulator source
@@ -1390,9 +1436,27 @@ static int set_machine_constraints(struct regulator_dev *rdev)
 		}
 	}
 
+	/*
+	 * Existing logic does not warn if over_current_protection is given as
+	 * a constraint but driver does not support that. I think we should
+	 * warn about this type of issues as it is possible someone changes
+	 * PMIC on board to another type - and the another PMIC's driver does
+	 * not support setting protection. Board composer may happily believe
+	 * the DT limits are respected - especially if the new PMIC HW also
+	 * supports protection but the driver does not. I won't change the logic
+	 * without hearing more experienced opinion on this though.
+	 *
+	 * If warning is seen as a good idea then we can merge handling the
+	 * over-curret protection and detection and get rid of this special
+	 * handling.
+	 */
 	if (rdev->constraints->over_current_protection
 		&& ops->set_over_current_protection) {
-		ret = ops->set_over_current_protection(rdev);
+		int lim = rdev->constraints->over_curr_limits.prot;
+
+		ret = ops->set_over_current_protection(rdev, lim,
+						       REGULATOR_SEVERITY_PROT,
+						       true);
 		if (ret < 0) {
 			rdev_err(rdev, "failed to set over current protection: %pe\n",
 				 ERR_PTR(ret));
@@ -1400,6 +1464,62 @@ static int set_machine_constraints(struct regulator_dev *rdev)
 		}
 	}
 
+	if (rdev->constraints->over_current_detection)
+		ret = handle_notify_limits(rdev,
+					   ops->set_over_current_protection,
+					   &rdev->constraints->over_curr_limits);
+	if (ret) {
+		if (ret != -EOPNOTSUPP) {
+			rdev_err(rdev, "failed to set over current limits: %pe\n",
+				 ERR_PTR(ret));
+			return ret;
+		}
+		rdev_warn(rdev,
+			  "IC does not support requested over-current limits\n");
+	}
+
+	if (rdev->constraints->over_voltage_detection)
+		ret = handle_notify_limits(rdev,
+					   ops->set_over_voltage_protection,
+					   &rdev->constraints->over_voltage_limits);
+	if (ret) {
+		if (ret != -EOPNOTSUPP) {
+			rdev_err(rdev, "failed to set over voltage limits %pe\n",
+				 ERR_PTR(ret));
+			return ret;
+		}
+		rdev_warn(rdev,
+			  "IC does not support requested over voltage limits\n");
+	}
+
+	if (rdev->constraints->under_voltage_detection)
+		ret = handle_notify_limits(rdev,
+					   ops->set_under_voltage_protection,
+					   &rdev->constraints->under_voltage_limits);
+	if (ret) {
+		if (ret != -EOPNOTSUPP) {
+			rdev_err(rdev, "failed to set under voltage limits %pe\n",
+				 ERR_PTR(ret));
+			return ret;
+		}
+		rdev_warn(rdev,
+			  "IC does not support requested under voltage limits\n");
+	}
+
+	if (rdev->constraints->over_temp_detection)
+		ret = handle_notify_limits(rdev,
+					   ops->set_thermal_protection,
+					   &rdev->constraints->temp_limits);
+	if (ret) {
+		if (ret != -EOPNOTSUPP) {
+			rdev_err(rdev, "failed to set temperature limits %pe\n",
+				 ERR_PTR(ret));
+			return ret;
+		}
+		rdev_warn(rdev,
+			  "IC does not support requested temperature limits\n");
+	}
+
 	if (rdev->constraints->active_discharge && ops->set_active_discharge) {
 		bool ad_state = (rdev->constraints->active_discharge ==
 			      REGULATOR_ACTIVE_DISCHARGE_ENABLE) ? true : false;
diff --git a/drivers/regulator/of_regulator.c b/drivers/regulator/of_regulator.c
index 49f6c05fee34..f54d4f176882 100644
--- a/drivers/regulator/of_regulator.c
+++ b/drivers/regulator/of_regulator.c
@@ -21,6 +21,62 @@ static const char *const regulator_states[PM_SUSPEND_MAX + 1] = {
 	[PM_SUSPEND_MAX]	= "regulator-state-disk",
 };
 
+static void fill_limit(int *limit, int val)
+{
+	if (val)
+		if (val == 1)
+			*limit = REGULATOR_NOTIF_LIMIT_ENABLE;
+		else
+			*limit = val;
+	else
+		*limit = REGULATOR_NOTIF_LIMIT_DISABLE;
+}
+
+static void of_get_regulator_prot_limits(struct device_node *np,
+				struct regulation_constraints *constraints)
+{
+	u32 pval;
+	int i;
+	static const char *const props[] = {
+		"regulator-oc-%s-microamp",
+		"regulator-ov-%s-microvolt",
+		"regulator-temp-%s-kelvin",
+		"regulator-uv-%s-microvolt",
+	};
+	struct notification_limit *limits[] = {
+		&constraints->over_curr_limits,
+		&constraints->over_voltage_limits,
+		&constraints->temp_limits,
+		&constraints->under_voltage_limits,
+	};
+	bool set[4] = {0};
+
+	/* Protection limits: */
+	for (i = 0; i < ARRAY_SIZE(props); i++) {
+		char prop[255];
+		bool found;
+		int j;
+		static const char *const lvl[] = {
+			"protection", "error", "warn"
+		};
+		int *l[] = {
+			&limits[i]->prot, &limits[i]->err, &limits[i]->warn,
+		};
+
+		for (j = 0; j < ARRAY_SIZE(lvl); j++) {
+			snprintf(prop, 255, props[i], lvl[j]);
+			found = !of_property_read_u32(np, prop, &pval);
+			if (found)
+				fill_limit(l[j], pval);
+			set[i] |= found;
+		}
+	}
+	constraints->over_current_detection = set[0];
+	constraints->over_voltage_detection = set[1];
+	constraints->over_temp_detection = set[2];
+	constraints->under_voltage_detection = set[3];
+}
+
 static int of_get_regulation_constraints(struct device *dev,
 					struct device_node *np,
 					struct regulator_init_data **init_data,
@@ -188,6 +244,8 @@ static int of_get_regulation_constraints(struct device *dev,
 	constraints->over_current_protection = of_property_read_bool(np,
 					"regulator-over-current-protection");
 
+	of_get_regulator_prot_limits(np, constraints);
+
 	for (i = 0; i < ARRAY_SIZE(regulator_states); i++) {
 		switch (i) {
 		case PM_SUSPEND_MEM:
diff --git a/drivers/regulator/qcom-labibb-regulator.c b/drivers/regulator/qcom-labibb-regulator.c
index de25e3279b4b..b3da0dc58782 100644
--- a/drivers/regulator/qcom-labibb-regulator.c
+++ b/drivers/regulator/qcom-labibb-regulator.c
@@ -307,13 +307,21 @@ end:
 	return IRQ_HANDLED;
 }
 
-static int qcom_labibb_set_ocp(struct regulator_dev *rdev)
+static int qcom_labibb_set_ocp(struct regulator_dev *rdev, int lim,
+			       int severity, bool enable)
 {
 	struct labibb_regulator *vreg = rdev_get_drvdata(rdev);
 	char *ocp_irq_name;
 	u32 irq_flags = IRQF_ONESHOT;
 	int irq_trig_low, ret;
 
+	/*
+	 * labibb supports only protection - and does not support setting
+	 * limit. Furthermore, we don't support disabling protection.
+	 */
+	if (lim || severity != REGULATOR_SEVERITY_PROT || !enable)
+		return -EINVAL;
+
 	/* If there is no OCP interrupt, there's nothing to set */
 	if (vreg->ocp_irq <= 0)
 		return -EINVAL;
diff --git a/drivers/regulator/qcom_spmi-regulator.c b/drivers/regulator/qcom_spmi-regulator.c
index 95677c51c1fa..41424a3366d0 100644
--- a/drivers/regulator/qcom_spmi-regulator.c
+++ b/drivers/regulator/qcom_spmi-regulator.c
@@ -595,11 +595,15 @@ static int spmi_regulator_vs_enable(struct regulator_dev *rdev)
 	return regulator_enable_regmap(rdev);
 }
 
-static int spmi_regulator_vs_ocp(struct regulator_dev *rdev)
+static int spmi_regulator_vs_ocp(struct regulator_dev *rdev, int lim_uA,
+				 int severity, bool enable)
 {
 	struct spmi_regulator *vreg = rdev_get_drvdata(rdev);
 	u8 reg = SPMI_VS_OCP_OVERRIDE;
 
+	if (lim_uA || !enable || severity != REGULATOR_SEVERITY_PROT)
+		return -EINVAL;
+
 	return spmi_vreg_write(vreg, SPMI_VS_REG_OCP, &reg, 1);
 }
 
diff --git a/drivers/regulator/stpmic1_regulator.c b/drivers/regulator/stpmic1_regulator.c
index cf10fdb72e32..2d7597c76e4a 100644
--- a/drivers/regulator/stpmic1_regulator.c
+++ b/drivers/regulator/stpmic1_regulator.c
@@ -32,7 +32,8 @@ struct stpmic1_regulator_cfg {
 
 static int stpmic1_set_mode(struct regulator_dev *rdev, unsigned int mode);
 static unsigned int stpmic1_get_mode(struct regulator_dev *rdev);
-static int stpmic1_set_icc(struct regulator_dev *rdev);
+static int stpmic1_set_icc(struct regulator_dev *rdev, int lim, int severity,
+			   bool enable);
 static unsigned int stpmic1_map_mode(unsigned int mode);
 
 enum {
@@ -491,11 +492,26 @@ static int stpmic1_set_mode(struct regulator_dev *rdev, unsigned int mode)
 				  STPMIC1_BUCK_MODE_LP, value);
 }
 
-static int stpmic1_set_icc(struct regulator_dev *rdev)
+static int stpmic1_set_icc(struct regulator_dev *rdev, int lim, int severity,
+			   bool enable)
 {
 	struct stpmic1_regulator_cfg *cfg = rdev_get_drvdata(rdev);
 	struct regmap *regmap = rdev_get_regmap(rdev);
 
+	/*
+	 * The code seems like one bit in a register controls whether OCP is
+	 * enabled. So we might be able to turn it off here is if that
+	 * was requested. I won't support this because I don't have the HW.
+	 * Feel free to try and implement if you have the HW and need kernel
+	 * to disable this.
+	 *
+	 * Also, I don't know if limit can be configured or if we support
+	 * error/warning instead of protect. So I just keep existing logic
+	 * and assume no.
+	 */
+	if (lim || severity != REGULATOR_SEVERITY_PROT || !enable)
+		return -EINVAL;
+
 	/* enable switch off in case of over current */
 	return regmap_update_bits(regmap, cfg->icc_reg, cfg->icc_mask,
 				  cfg->icc_mask);
diff --git a/include/linux/regulator/driver.h b/include/linux/regulator/driver.h
index 1d1a8951e740..4ebfaacf42b7 100644
--- a/include/linux/regulator/driver.h
+++ b/include/linux/regulator/driver.h
@@ -40,6 +40,15 @@ enum regulator_status {
 	REGULATOR_STATUS_UNDEFINED,
 };
 
+enum regulator_detection_severity {
+	/* Hardware shut down voltage outputs if condition is detected */
+	REGULATOR_SEVERITY_PROT,
+	/* Hardware is probably damaged/inoperable */
+	REGULATOR_SEVERITY_ERR,
+	/* Hardware is still recoverable but recovery action must be taken */
+	REGULATOR_SEVERITY_WARN,
+};
+
 /* Initialize struct linear_range for regulators */
 #define REGULATOR_LINEAR_RANGE(_min_uV, _min_sel, _max_sel, _step_uV)	\
 {									\
@@ -78,8 +87,25 @@ enum regulator_status {
  * @get_current_limit: Get the configured limit for a current-limited regulator.
  * @set_input_current_limit: Configure an input limit.
  *
- * @set_over_current_protection: Support capability of automatically shutting
- *                               down when detecting an over current event.
+ * @set_over_current_protection: Support enabling of and setting limits for over
+ *	current situation detection. Detection can be configured for three
+ *	levels of severity.
+ *	REGULATOR_SEVERITY_PROT should automatically shut down the regulator(s).
+ *	REGULATOR_SEVERITY_ERR should indicate that over-current situation is
+ *		caused by an unrecoverable error but HW does not perform
+ *		automatic shut down.
+ *	REGULATOR_SEVERITY_WARN should indicate situation where hardware is
+ *		still believed to not be damaged but that a board sepcific
+ *		recovery action is needed. If lim_uA is 0 the limit should not
+ *		be changed but the detection should just be enabled/disabled as
+ *		is requested.
+ * @set_over_voltage_protection: Support enabling of and setting limits for over
+ *	voltage situation detection. Detection can be configured for same
+ *	severities as over current protection.
+ * @set_under_voltage_protection: Support enabling of and setting limits for
+ *	under situation detection.
+ * @set_thermal_protection: Support enabling of and setting limits for over
+ *	temperature situation detection.
  *
  * @set_active_discharge: Set active discharge enable/disable of regulators.
  *
@@ -143,8 +169,15 @@ struct regulator_ops {
 	int (*get_current_limit) (struct regulator_dev *);
 
 	int (*set_input_current_limit) (struct regulator_dev *, int lim_uA);
-	int (*set_over_current_protection) (struct regulator_dev *);
-	int (*set_active_discharge) (struct regulator_dev *, bool enable);
+	int (*set_over_current_protection)(struct regulator_dev *, int lim_uA,
+					   int severity, bool enable);
+	int (*set_over_voltage_protection)(struct regulator_dev *, int lim_uV,
+					   int severity, bool enable);
+	int (*set_under_voltage_protection)(struct regulator_dev *, int lim_uV,
+					    int severity, bool enable);
+	int (*set_thermal_protection)(struct regulator_dev *, int lim,
+				      int severity, bool enable);
+	int (*set_active_discharge)(struct regulator_dev *, bool enable);
 
 	/* enable/disable regulator */
 	int (*enable) (struct regulator_dev *);
diff --git a/include/linux/regulator/machine.h b/include/linux/regulator/machine.h
index 8a56f033b6cd..68b4a514a410 100644
--- a/include/linux/regulator/machine.h
+++ b/include/linux/regulator/machine.h
@@ -83,6 +83,14 @@ struct regulator_state {
 	bool changeable;
 };
 
+#define REGULATOR_NOTIF_LIMIT_DISABLE -1
+#define REGULATOR_NOTIF_LIMIT_ENABLE -2
+struct notification_limit {
+	int prot;
+	int err;
+	int warn;
+};
+
 /**
  * struct regulation_constraints - regulator operating constraints.
  *
@@ -100,6 +108,11 @@ struct regulator_state {
  * @ilim_uA: Maximum input current.
  * @system_load: Load that isn't captured by any consumer requests.
  *
+ * @over_curr_limits:		Limits for acting on over current.
+ * @over_voltage_limits:	Limits for acting on over voltage.
+ * @under_voltage_limits:	Limits for acting on under voltage.
+ * @temp_limits:		Limits for acting on over temperature.
+
  * @max_spread: Max possible spread between coupled regulators
  * @max_uV_step: Max possible step change in voltage
  * @valid_modes_mask: Mask of modes which may be configured by consumers.
@@ -116,6 +129,11 @@ struct regulator_state {
  * @pull_down: Enable pull down when regulator is disabled.
  * @over_current_protection: Auto disable on over current event.
  *
+ * @over_current_detection: Configure over current limits.
+ * @over_voltage_detection: Configure over voltage limits.
+ * @under_voltage_detection: Configure under voltage limits.
+ * @over_temp_detection: Configure over temperature limits.
+ *
  * @input_uV: Input voltage for regulator when supplied by another regulator.
  *
  * @state_disk: State for regulator when system is suspended in disk mode.
@@ -172,6 +190,10 @@ struct regulation_constraints {
 	struct regulator_state state_disk;
 	struct regulator_state state_mem;
 	struct regulator_state state_standby;
+	struct notification_limit over_curr_limits;
+	struct notification_limit over_voltage_limits;
+	struct notification_limit under_voltage_limits;
+	struct notification_limit temp_limits;
 	suspend_state_t initial_state; /* suspend state to set at init */
 
 	/* mode to set on startup */
@@ -193,6 +215,10 @@ struct regulation_constraints {
 	unsigned soft_start:1;	/* ramp voltage slowly */
 	unsigned pull_down:1;	/* pull down resistor when regulator off */
 	unsigned over_current_protection:1; /* auto disable on over current */
+	unsigned over_current_detection:1; /* notify on over current */
+	unsigned over_voltage_detection:1; /* notify on over voltage */
+	unsigned under_voltage_detection:1; /* notify on under voltage */
+	unsigned over_temp_detection:1; /* notify on over temperature */
 };
 
 /**
-- 
cgit v1.2.3-59-g8ed1b


From e7bf1fa58c46db9f72220c4472272d6da0a54c91 Mon Sep 17 00:00:00 2001
From: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Date: Thu, 3 Jun 2021 08:42:46 +0300
Subject: regulator: bd9576: Support error reporting

BD9573 and BD9576 support set of "protection" interrupts for "fatal"
issues. Those lead to SOC reset as PMIC shuts the power outputs. Thus
there is no relevant IRQ handling for them.

Few "detection" interrupts were added to the BD9576 with the idea that
SOC could take some recovery-action before error gets unrecoverable.

Add support for over and under voltage detection for Vout1 ... Vout4
and VoutL1. Add over-current detection for VoutS1 and finally a
thermal warning (common for all regulators) which alerts 30 C
before temperature reaches the thermal shutdown point. This way
consumer drivers can build error-recovery mechanisms.

Unfortunately the BD9576 interrupt logic was not re-evaluated. IRQs
are not designed to be properly acknowleged - and IRQ line is kept
active for whole duration of error condition (in comparison to
informing only about state change).

Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Link: https://lore.kernel.org/r/05c4f7a8e30ef1d4d5f3ceab07da4ebe68f5b4ed.1622628334.git.matti.vaittinen@fi.rohmeurope.com
Signed-off-by: Mark Brown <broonie@kernel.org>
---
 drivers/regulator/bd9576-regulator.c | 1050 ++++++++++++++++++++++++++++++----
 1 file changed, 926 insertions(+), 124 deletions(-)

(limited to 'drivers/regulator')

diff --git a/drivers/regulator/bd9576-regulator.c b/drivers/regulator/bd9576-regulator.c
index 204a2da054f5..6ba12af4c632 100644
--- a/drivers/regulator/bd9576-regulator.c
+++ b/drivers/regulator/bd9576-regulator.c
@@ -2,10 +2,10 @@
 // Copyright (C) 2020 ROHM Semiconductors
 // ROHM BD9576MUF/BD9573MUF regulator driver
 
-#include <linux/delay.h>
 #include <linux/err.h>
 #include <linux/gpio/consumer.h>
 #include <linux/interrupt.h>
+#include <linux/jiffies.h>
 #include <linux/kernel.h>
 #include <linux/mfd/rohm-bd957x.h>
 #include <linux/mfd/rohm-generic.h>
@@ -16,11 +16,18 @@
 #include <linux/regulator/machine.h>
 #include <linux/regulator/of_regulator.h>
 #include <linux/slab.h>
+#include <linux/spinlock.h>
+#include <linux/workqueue.h>
 
 #define BD957X_VOUTS1_VOLT	3300000
 #define BD957X_VOUTS4_BASE_VOLT	1030000
 #define BD957X_VOUTS34_NUM_VOLT	32
 
+#define BD9576_THERM_IRQ_MASK_TW	BIT(5)
+#define BD9576_xVD_IRQ_MASK_VOUTL1	BIT(5)
+#define BD9576_UVD_IRQ_MASK_VOUTS1_OCW	BIT(6)
+#define BD9576_xVD_IRQ_MASK_VOUT1TO4	0x0F
+
 static int vout1_volt_table[] = {5000000, 4900000, 4800000, 4700000, 4600000,
 				 4500000, 4500000, 4500000, 5000000, 5100000,
 				 5200000, 5300000, 5400000, 5500000, 5500000,
@@ -36,9 +43,85 @@ static int voutl1_volt_table[] = {2500000, 2540000, 2580000, 2620000, 2660000,
 				  2420000, 2380000, 2340000, 2300000, 2260000,
 				  2220000};
 
+static const struct linear_range vout1_xvd_ranges[] = {
+	REGULATOR_LINEAR_RANGE(225000, 0x01, 0x2b, 0),
+	REGULATOR_LINEAR_RANGE(225000, 0x2c, 0x54, 5000),
+	REGULATOR_LINEAR_RANGE(425000, 0x55, 0x7f, 0),
+};
+
+static const struct linear_range vout234_xvd_ranges[] = {
+	REGULATOR_LINEAR_RANGE(17000, 0x01, 0x0f, 0),
+	REGULATOR_LINEAR_RANGE(17000, 0x10, 0x6d, 1000),
+	REGULATOR_LINEAR_RANGE(110000, 0x6e, 0x7f, 0),
+};
+
+static const struct linear_range voutL1_xvd_ranges[] = {
+	REGULATOR_LINEAR_RANGE(34000, 0x01, 0x0f, 0),
+	REGULATOR_LINEAR_RANGE(34000, 0x10, 0x6d, 2000),
+	REGULATOR_LINEAR_RANGE(220000, 0x6e, 0x7f, 0),
+};
+
+static struct linear_range voutS1_ocw_ranges_internal[] = {
+	REGULATOR_LINEAR_RANGE(200000, 0x01, 0x04, 0),
+	REGULATOR_LINEAR_RANGE(250000, 0x05, 0x18, 50000),
+	REGULATOR_LINEAR_RANGE(1200000, 0x19, 0x3f, 0),
+};
+
+static struct linear_range voutS1_ocw_ranges[] = {
+	REGULATOR_LINEAR_RANGE(50000, 0x01, 0x04, 0),
+	REGULATOR_LINEAR_RANGE(60000, 0x05, 0x18, 10000),
+	REGULATOR_LINEAR_RANGE(250000, 0x19, 0x3f, 0),
+};
+
+static struct linear_range voutS1_ocp_ranges_internal[] = {
+	REGULATOR_LINEAR_RANGE(300000, 0x01, 0x06, 0),
+	REGULATOR_LINEAR_RANGE(350000, 0x7, 0x1b, 50000),
+	REGULATOR_LINEAR_RANGE(1350000, 0x1c, 0x3f, 0),
+};
+
+static struct linear_range voutS1_ocp_ranges[] = {
+	REGULATOR_LINEAR_RANGE(70000, 0x01, 0x06, 0),
+	REGULATOR_LINEAR_RANGE(80000, 0x7, 0x1b, 10000),
+	REGULATOR_LINEAR_RANGE(280000, 0x1c, 0x3f, 0),
+};
+
 struct bd957x_regulator_data {
 	struct regulator_desc desc;
 	int base_voltage;
+	struct regulator_dev *rdev;
+	int ovd_notif;
+	int uvd_notif;
+	int temp_notif;
+	int ovd_err;
+	int uvd_err;
+	int temp_err;
+	const struct linear_range *xvd_ranges;
+	int num_xvd_ranges;
+	bool oc_supported;
+	unsigned int ovd_reg;
+	unsigned int uvd_reg;
+	unsigned int xvd_mask;
+	unsigned int ocp_reg;
+	unsigned int ocp_mask;
+	unsigned int ocw_reg;
+	unsigned int ocw_mask;
+	unsigned int ocw_rfet;
+};
+
+#define BD9576_NUM_REGULATORS 6
+#define BD9576_NUM_OVD_REGULATORS 5
+
+struct bd957x_data {
+	struct bd957x_regulator_data regulator_data[BD9576_NUM_REGULATORS];
+	struct regmap *regmap;
+	struct delayed_work therm_irq_suppress;
+	struct delayed_work ovd_irq_suppress;
+	struct delayed_work uvd_irq_suppress;
+	unsigned int therm_irq;
+	unsigned int ovd_irq;
+	unsigned int uvd_irq;
+	spinlock_t err_lock;
+	int regulator_global_err;
 };
 
 static int bd957x_vout34_list_voltage(struct regulator_dev *rdev,
@@ -72,151 +155,784 @@ static int bd957x_list_voltage(struct regulator_dev *rdev,
 	return desc->volt_table[index];
 }
 
-static const struct regulator_ops bd957x_vout34_ops = {
+static void bd9576_fill_ovd_flags(struct bd957x_regulator_data *data,
+				  bool warn)
+{
+	if (warn) {
+		data->ovd_notif = REGULATOR_EVENT_OVER_VOLTAGE_WARN;
+		data->ovd_err = REGULATOR_ERROR_OVER_VOLTAGE_WARN;
+	} else {
+		data->ovd_notif = REGULATOR_EVENT_REGULATION_OUT;
+		data->ovd_err = REGULATOR_ERROR_REGULATION_OUT;
+	}
+}
+
+static void bd9576_fill_ocp_flags(struct bd957x_regulator_data *data,
+				  bool warn)
+{
+	if (warn) {
+		data->uvd_notif = REGULATOR_EVENT_OVER_CURRENT_WARN;
+		data->uvd_err = REGULATOR_ERROR_OVER_CURRENT_WARN;
+	} else {
+		data->uvd_notif = REGULATOR_EVENT_OVER_CURRENT;
+		data->uvd_err = REGULATOR_ERROR_OVER_CURRENT;
+	}
+}
+
+static void bd9576_fill_uvd_flags(struct bd957x_regulator_data *data,
+				  bool warn)
+{
+	if (warn) {
+		data->uvd_notif = REGULATOR_EVENT_UNDER_VOLTAGE_WARN;
+		data->uvd_err = REGULATOR_ERROR_UNDER_VOLTAGE_WARN;
+	} else {
+		data->uvd_notif = REGULATOR_EVENT_UNDER_VOLTAGE;
+		data->uvd_err = REGULATOR_ERROR_UNDER_VOLTAGE;
+	}
+}
+
+static void bd9576_fill_temp_flags(struct bd957x_regulator_data *data,
+				   bool enable, bool warn)
+{
+	if (!enable) {
+		data->temp_notif = 0;
+		data->temp_err = 0;
+	} else if (warn) {
+		data->temp_notif = REGULATOR_EVENT_OVER_TEMP_WARN;
+		data->temp_err = REGULATOR_ERROR_OVER_TEMP_WARN;
+	} else {
+		data->temp_notif = REGULATOR_EVENT_OVER_TEMP;
+		data->temp_err = REGULATOR_ERROR_OVER_TEMP;
+	}
+}
+
+static int bd9576_set_limit(const struct linear_range *r, int num_ranges,
+			    struct regmap *regmap, int reg, int mask, int lim)
+{
+	int ret;
+	bool found;
+	int sel = 0;
+
+	if (lim) {
+
+		ret = linear_range_get_selector_low_array(r, num_ranges,
+							  lim, &sel, &found);
+		if (ret)
+			return ret;
+
+		if (!found)
+			dev_warn(regmap_get_device(regmap),
+				 "limit %d out of range. Setting lower\n",
+				 lim);
+	}
+
+	return regmap_update_bits(regmap, reg, mask, sel);
+}
+
+static bool check_ocp_flag_mismatch(struct regulator_dev *rdev, int severity,
+				    struct bd957x_regulator_data *r)
+{
+	if ((severity == REGULATOR_SEVERITY_ERR &&
+	    r->uvd_notif != REGULATOR_EVENT_OVER_CURRENT) ||
+	    (severity == REGULATOR_SEVERITY_WARN &&
+	    r->uvd_notif != REGULATOR_EVENT_OVER_CURRENT_WARN)) {
+		dev_warn(rdev_get_dev(rdev),
+			 "Can't support both OCP WARN and ERR\n");
+		/* Do not overwrite ERR config with WARN */
+		if (severity == REGULATOR_SEVERITY_WARN)
+			return true;
+
+		bd9576_fill_ocp_flags(r, 0);
+	}
+
+	return false;
+}
+
+static bool check_uvd_flag_mismatch(struct regulator_dev *rdev, int severity,
+				    struct bd957x_regulator_data *r)
+{
+	if ((severity == REGULATOR_SEVERITY_ERR &&
+	     r->uvd_notif != REGULATOR_EVENT_UNDER_VOLTAGE) ||
+	     (severity == REGULATOR_SEVERITY_WARN &&
+	     r->uvd_notif != REGULATOR_EVENT_UNDER_VOLTAGE_WARN)) {
+		dev_warn(rdev_get_dev(rdev),
+			 "Can't support both UVD WARN and ERR\n");
+		if (severity == REGULATOR_SEVERITY_WARN)
+			return true;
+
+		bd9576_fill_uvd_flags(r, 0);
+	}
+
+	return false;
+}
+
+static bool check_ovd_flag_mismatch(struct regulator_dev *rdev, int severity,
+				    struct bd957x_regulator_data *r)
+{
+	if ((severity == REGULATOR_SEVERITY_ERR &&
+	     r->ovd_notif != REGULATOR_EVENT_REGULATION_OUT) ||
+	     (severity == REGULATOR_SEVERITY_WARN &&
+	     r->ovd_notif != REGULATOR_EVENT_OVER_VOLTAGE_WARN)) {
+		dev_warn(rdev_get_dev(rdev),
+			 "Can't support both OVD WARN and ERR\n");
+		if (severity == REGULATOR_SEVERITY_WARN)
+			return true;
+
+		bd9576_fill_ovd_flags(r, 0);
+	}
+
+	return false;
+}
+
+static bool check_temp_flag_mismatch(struct regulator_dev *rdev, int severity,
+				    struct bd957x_regulator_data *r)
+{
+	if ((severity == REGULATOR_SEVERITY_ERR &&
+	     r->ovd_notif != REGULATOR_EVENT_OVER_TEMP) ||
+	     (severity == REGULATOR_SEVERITY_WARN &&
+	     r->ovd_notif != REGULATOR_EVENT_OVER_TEMP_WARN)) {
+		dev_warn(rdev_get_dev(rdev),
+			 "Can't support both thermal WARN and ERR\n");
+		if (severity == REGULATOR_SEVERITY_WARN)
+			return true;
+	}
+
+	return false;
+}
+
+static int bd9576_set_ocp(struct regulator_dev *rdev, int lim_uA, int severity,
+			  bool enable)
+{
+	struct bd957x_data *d;
+	struct bd957x_regulator_data *r;
+	int reg, mask;
+	int Vfet, rfet;
+	const struct linear_range *range;
+	int num_ranges;
+
+	if ((lim_uA && !enable) || (!lim_uA && enable))
+		return -EINVAL;
+
+	r = container_of(rdev->desc, struct bd957x_regulator_data, desc);
+	if (!r->oc_supported)
+		return -EINVAL;
+
+	d = rdev_get_drvdata(rdev);
+
+	if (severity == REGULATOR_SEVERITY_PROT) {
+		reg = r->ocp_reg;
+		mask = r->ocp_mask;
+		if (r->ocw_rfet) {
+			range = voutS1_ocp_ranges;
+			num_ranges = ARRAY_SIZE(voutS1_ocp_ranges);
+			rfet = r->ocw_rfet / 1000;
+		} else {
+			range = voutS1_ocp_ranges_internal;
+			num_ranges = ARRAY_SIZE(voutS1_ocp_ranges_internal);
+			/* Internal values are already micro-amperes */
+			rfet = 1000;
+		}
+	} else {
+		reg = r->ocw_reg;
+		mask = r->ocw_mask;
+
+		if (r->ocw_rfet) {
+			range = voutS1_ocw_ranges;
+			num_ranges = ARRAY_SIZE(voutS1_ocw_ranges);
+			rfet = r->ocw_rfet / 1000;
+		} else {
+			range = voutS1_ocw_ranges_internal;
+			num_ranges = ARRAY_SIZE(voutS1_ocw_ranges_internal);
+			/* Internal values are already micro-amperes */
+			rfet = 1000;
+		}
+
+		/* We abuse uvd fields for OCW on VoutS1 */
+		if (r->uvd_notif) {
+			/*
+			 * If both warning and error are requested, prioritize
+			 * ERROR configuration
+			 */
+			if (check_ocp_flag_mismatch(rdev, severity, r))
+				return 0;
+		} else {
+			bool warn = severity == REGULATOR_SEVERITY_WARN;
+
+			bd9576_fill_ocp_flags(r, warn);
+		}
+	}
+
+	/*
+	 * limits are given in uA, rfet is mOhm
+	 * Divide lim_uA by 1000 to get Vfet in uV.
+	 * (We expect both Rfet and limit uA to be magnitude of hundreds of
+	 * milli Amperes & milli Ohms => we should still have decent accuracy)
+	 */
+	Vfet = lim_uA/1000 * rfet;
+
+	return bd9576_set_limit(range, num_ranges, d->regmap,
+				reg, mask, Vfet);
+}
+
+static int bd9576_set_uvp(struct regulator_dev *rdev, int lim_uV, int severity,
+			  bool enable)
+{
+	struct bd957x_data *d;
+	struct bd957x_regulator_data *r;
+	int mask, reg;
+
+	if (severity == REGULATOR_SEVERITY_PROT) {
+		if (!enable || lim_uV)
+			return -EINVAL;
+		return 0;
+	}
+
+	/*
+	 * BD9576 has enable control as a special value in limit reg. Can't
+	 * set limit but keep feature disabled or enable W/O given limit.
+	 */
+	if ((lim_uV && !enable) || (!lim_uV && enable))
+		return -EINVAL;
+
+	r = container_of(rdev->desc, struct bd957x_regulator_data, desc);
+	d = rdev_get_drvdata(rdev);
+
+	mask = r->xvd_mask;
+	reg = r->uvd_reg;
+	/*
+	 * Check that there is no mismatch for what the detection IRQs are to
+	 * be used.
+	 */
+	if (r->uvd_notif) {
+		if (check_uvd_flag_mismatch(rdev, severity, r))
+			return 0;
+	} else {
+		bd9576_fill_uvd_flags(r, severity == REGULATOR_SEVERITY_WARN);
+	}
+
+	return bd9576_set_limit(r->xvd_ranges, r->num_xvd_ranges, d->regmap,
+				reg, mask, lim_uV);
+}
+
+static int bd9576_set_ovp(struct regulator_dev *rdev, int lim_uV, int severity,
+			  bool enable)
+{
+	struct bd957x_data *d;
+	struct bd957x_regulator_data *r;
+	int mask, reg;
+
+	if (severity == REGULATOR_SEVERITY_PROT) {
+		if (!enable || lim_uV)
+			return -EINVAL;
+		return 0;
+	}
+
+	/*
+	 * BD9576 has enable control as a special value in limit reg. Can't
+	 * set limit but keep feature disabled or enable W/O given limit.
+	 */
+	if ((lim_uV && !enable) || (!lim_uV && enable))
+		return -EINVAL;
+
+	r = container_of(rdev->desc, struct bd957x_regulator_data, desc);
+	d = rdev_get_drvdata(rdev);
+
+	mask = r->xvd_mask;
+	reg = r->ovd_reg;
+	/*
+	 * Check that there is no mismatch for what the detection IRQs are to
+	 * be used.
+	 */
+	if (r->ovd_notif) {
+		if (check_ovd_flag_mismatch(rdev, severity, r))
+			return 0;
+	} else {
+		bd9576_fill_ovd_flags(r, severity == REGULATOR_SEVERITY_WARN);
+	}
+
+	return bd9576_set_limit(r->xvd_ranges, r->num_xvd_ranges, d->regmap,
+				reg, mask, lim_uV);
+}
+
+
+static int bd9576_set_tw(struct regulator_dev *rdev, int lim, int severity,
+			  bool enable)
+{
+	struct bd957x_data *d;
+	struct bd957x_regulator_data *r;
+	int i;
+
+	/*
+	 * BD9576MUF has fixed temperature limits
+	 * The detection can only be enabled/disabled
+	 */
+	if (lim)
+		return -EINVAL;
+
+	/* Protection can't be disabled */
+	if (severity == REGULATOR_SEVERITY_PROT) {
+		if (!enable)
+			return -EINVAL;
+		else
+			return 0;
+	}
+
+	r = container_of(rdev->desc, struct bd957x_regulator_data, desc);
+	d = rdev_get_drvdata(rdev);
+
+	/*
+	 * Check that there is no mismatch for what the detection IRQs are to
+	 * be used.
+	 */
+	if (r->temp_notif)
+		if (check_temp_flag_mismatch(rdev, severity, r))
+			return 0;
+
+	bd9576_fill_temp_flags(r, enable, severity == REGULATOR_SEVERITY_WARN);
+
+	if (enable)
+		return regmap_update_bits(d->regmap, BD957X_REG_INT_THERM_MASK,
+					 BD9576_THERM_IRQ_MASK_TW, 0);
+
+	/*
+	 * If any of the regulators is interested in thermal warning we keep IRQ
+	 * enabled.
+	 */
+	for (i = 0; i < BD9576_NUM_REGULATORS; i++)
+		if (d->regulator_data[i].temp_notif)
+			return 0;
+
+	return regmap_update_bits(d->regmap, BD957X_REG_INT_THERM_MASK,
+				  BD9576_THERM_IRQ_MASK_TW,
+				  BD9576_THERM_IRQ_MASK_TW);
+}
+
+static const struct regulator_ops bd9573_vout34_ops = {
 	.is_enabled = regulator_is_enabled_regmap,
 	.list_voltage = bd957x_vout34_list_voltage,
 	.get_voltage_sel = regulator_get_voltage_sel_regmap,
 };
 
-static const struct regulator_ops bd957X_vouts1_regulator_ops = {
+static const struct regulator_ops bd9576_vout34_ops = {
+	.is_enabled = regulator_is_enabled_regmap,
+	.list_voltage = bd957x_vout34_list_voltage,
+	.get_voltage_sel = regulator_get_voltage_sel_regmap,
+	.set_over_voltage_protection = bd9576_set_ovp,
+	.set_under_voltage_protection = bd9576_set_uvp,
+	.set_thermal_protection = bd9576_set_tw,
+};
+
+static const struct regulator_ops bd9573_vouts1_regulator_ops = {
+	.is_enabled = regulator_is_enabled_regmap,
+};
+
+static const struct regulator_ops bd9576_vouts1_regulator_ops = {
+	.is_enabled = regulator_is_enabled_regmap,
+	.set_over_current_protection = bd9576_set_ocp,
+};
+
+static const struct regulator_ops bd9573_ops = {
 	.is_enabled = regulator_is_enabled_regmap,
+	.list_voltage = bd957x_list_voltage,
+	.get_voltage_sel = regulator_get_voltage_sel_regmap,
 };
 
-static const struct regulator_ops bd957x_ops = {
+static const struct regulator_ops bd9576_ops = {
 	.is_enabled = regulator_is_enabled_regmap,
 	.list_voltage = bd957x_list_voltage,
 	.get_voltage_sel = regulator_get_voltage_sel_regmap,
+	.set_over_voltage_protection = bd9576_set_ovp,
+	.set_under_voltage_protection = bd9576_set_uvp,
+	.set_thermal_protection = bd9576_set_tw,
+};
+
+static const struct regulator_ops  *bd9573_ops_arr[] = {
+	[BD957X_VD50]	= &bd9573_ops,
+	[BD957X_VD18]	= &bd9573_ops,
+	[BD957X_VDDDR]	= &bd9573_vout34_ops,
+	[BD957X_VD10]	= &bd9573_vout34_ops,
+	[BD957X_VOUTL1]	= &bd9573_ops,
+	[BD957X_VOUTS1]	= &bd9573_vouts1_regulator_ops,
 };
 
-static struct bd957x_regulator_data bd9576_regulators[] = {
-	{
-		.desc = {
-			.name = "VD50",
-			.of_match = of_match_ptr("regulator-vd50"),
-			.regulators_node = of_match_ptr("regulators"),
-			.id = BD957X_VD50,
-			.type = REGULATOR_VOLTAGE,
-			.ops = &bd957x_ops,
-			.volt_table = &vout1_volt_table[0],
-			.n_voltages = ARRAY_SIZE(vout1_volt_table),
-			.vsel_reg = BD957X_REG_VOUT1_TUNE,
-			.vsel_mask = BD957X_MASK_VOUT1_TUNE,
-			.enable_reg = BD957X_REG_POW_TRIGGER1,
-			.enable_mask = BD957X_REGULATOR_EN_MASK,
-			.enable_val = BD957X_REGULATOR_DIS_VAL,
-			.enable_is_inverted = true,
-			.owner = THIS_MODULE,
+static const struct regulator_ops  *bd9576_ops_arr[] = {
+	[BD957X_VD50]	= &bd9576_ops,
+	[BD957X_VD18]	= &bd9576_ops,
+	[BD957X_VDDDR]	= &bd9576_vout34_ops,
+	[BD957X_VD10]	= &bd9576_vout34_ops,
+	[BD957X_VOUTL1]	= &bd9576_ops,
+	[BD957X_VOUTS1]	= &bd9576_vouts1_regulator_ops,
+};
+
+static int vouts1_get_fet_res(struct device_node *np,
+				const struct regulator_desc *desc,
+				struct regulator_config *cfg)
+{
+	struct bd957x_regulator_data *data;
+	int ret;
+	u32 uohms;
+
+	data = container_of(desc, struct bd957x_regulator_data, desc);
+
+	ret = of_property_read_u32(np, "rohm,ocw-fet-ron-micro-ohms", &uohms);
+	if (ret) {
+		if (ret != -EINVAL)
+			return ret;
+
+		return 0;
+	}
+	data->ocw_rfet = uohms;
+	return 0;
+}
+
+static struct bd957x_data bd957x_regulators = {
+	.regulator_data = {
+		{
+			.desc = {
+				.name = "VD50",
+				.of_match = of_match_ptr("regulator-vd50"),
+				.regulators_node = of_match_ptr("regulators"),
+				.id = BD957X_VD50,
+				.type = REGULATOR_VOLTAGE,
+				.volt_table = &vout1_volt_table[0],
+				.n_voltages = ARRAY_SIZE(vout1_volt_table),
+				.vsel_reg = BD957X_REG_VOUT1_TUNE,
+				.vsel_mask = BD957X_MASK_VOUT1_TUNE,
+				.enable_reg = BD957X_REG_POW_TRIGGER1,
+				.enable_mask = BD957X_REGULATOR_EN_MASK,
+				.enable_val = BD957X_REGULATOR_DIS_VAL,
+				.enable_is_inverted = true,
+				.owner = THIS_MODULE,
+			},
+			.xvd_ranges = vout1_xvd_ranges,
+			.num_xvd_ranges = ARRAY_SIZE(vout1_xvd_ranges),
+			.ovd_reg = BD9576_REG_VOUT1_OVD,
+			.uvd_reg = BD9576_REG_VOUT1_UVD,
+			.xvd_mask = BD9576_MASK_XVD,
 		},
-	},
-	{
-		.desc = {
-			.name = "VD18",
-			.of_match = of_match_ptr("regulator-vd18"),
-			.regulators_node = of_match_ptr("regulators"),
-			.id = BD957X_VD18,
-			.type = REGULATOR_VOLTAGE,
-			.ops = &bd957x_ops,
-			.volt_table = &vout2_volt_table[0],
-			.n_voltages = ARRAY_SIZE(vout2_volt_table),
-			.vsel_reg = BD957X_REG_VOUT2_TUNE,
-			.vsel_mask = BD957X_MASK_VOUT2_TUNE,
-			.enable_reg = BD957X_REG_POW_TRIGGER2,
-			.enable_mask = BD957X_REGULATOR_EN_MASK,
-			.enable_val = BD957X_REGULATOR_DIS_VAL,
-			.enable_is_inverted = true,
-			.owner = THIS_MODULE,
+		{
+			.desc = {
+				.name = "VD18",
+				.of_match = of_match_ptr("regulator-vd18"),
+				.regulators_node = of_match_ptr("regulators"),
+				.id = BD957X_VD18,
+				.type = REGULATOR_VOLTAGE,
+				.volt_table = &vout2_volt_table[0],
+				.n_voltages = ARRAY_SIZE(vout2_volt_table),
+				.vsel_reg = BD957X_REG_VOUT2_TUNE,
+				.vsel_mask = BD957X_MASK_VOUT2_TUNE,
+				.enable_reg = BD957X_REG_POW_TRIGGER2,
+				.enable_mask = BD957X_REGULATOR_EN_MASK,
+				.enable_val = BD957X_REGULATOR_DIS_VAL,
+				.enable_is_inverted = true,
+				.owner = THIS_MODULE,
+			},
+			.xvd_ranges = vout234_xvd_ranges,
+			.num_xvd_ranges = ARRAY_SIZE(vout234_xvd_ranges),
+			.ovd_reg = BD9576_REG_VOUT2_OVD,
+			.uvd_reg = BD9576_REG_VOUT2_UVD,
+			.xvd_mask = BD9576_MASK_XVD,
 		},
-	},
-	{
-		.desc = {
-			.name = "VDDDR",
-			.of_match = of_match_ptr("regulator-vdddr"),
-			.regulators_node = of_match_ptr("regulators"),
-			.id = BD957X_VDDDR,
-			.ops = &bd957x_vout34_ops,
-			.type = REGULATOR_VOLTAGE,
-			.n_voltages = BD957X_VOUTS34_NUM_VOLT,
-			.vsel_reg = BD957X_REG_VOUT3_TUNE,
-			.vsel_mask = BD957X_MASK_VOUT3_TUNE,
-			.enable_reg = BD957X_REG_POW_TRIGGER3,
-			.enable_mask = BD957X_REGULATOR_EN_MASK,
-			.enable_val = BD957X_REGULATOR_DIS_VAL,
-			.enable_is_inverted = true,
-			.owner = THIS_MODULE,
+		{
+			.desc = {
+				.name = "VDDDR",
+				.of_match = of_match_ptr("regulator-vdddr"),
+				.regulators_node = of_match_ptr("regulators"),
+				.id = BD957X_VDDDR,
+				.type = REGULATOR_VOLTAGE,
+				.n_voltages = BD957X_VOUTS34_NUM_VOLT,
+				.vsel_reg = BD957X_REG_VOUT3_TUNE,
+				.vsel_mask = BD957X_MASK_VOUT3_TUNE,
+				.enable_reg = BD957X_REG_POW_TRIGGER3,
+				.enable_mask = BD957X_REGULATOR_EN_MASK,
+				.enable_val = BD957X_REGULATOR_DIS_VAL,
+				.enable_is_inverted = true,
+				.owner = THIS_MODULE,
+			},
+			.ovd_reg = BD9576_REG_VOUT3_OVD,
+			.uvd_reg = BD9576_REG_VOUT3_UVD,
+			.xvd_mask = BD9576_MASK_XVD,
+			.xvd_ranges = vout234_xvd_ranges,
+			.num_xvd_ranges = ARRAY_SIZE(vout234_xvd_ranges),
 		},
-	},
-	{
-		.desc = {
-			.name = "VD10",
-			.of_match = of_match_ptr("regulator-vd10"),
-			.regulators_node = of_match_ptr("regulators"),
-			.id = BD957X_VD10,
-			.ops = &bd957x_vout34_ops,
-			.type = REGULATOR_VOLTAGE,
-			.fixed_uV = BD957X_VOUTS4_BASE_VOLT,
-			.n_voltages = BD957X_VOUTS34_NUM_VOLT,
-			.vsel_reg = BD957X_REG_VOUT4_TUNE,
-			.vsel_mask = BD957X_MASK_VOUT4_TUNE,
-			.enable_reg = BD957X_REG_POW_TRIGGER4,
-			.enable_mask = BD957X_REGULATOR_EN_MASK,
-			.enable_val = BD957X_REGULATOR_DIS_VAL,
-			.enable_is_inverted = true,
-			.owner = THIS_MODULE,
+		{
+			.desc = {
+				.name = "VD10",
+				.of_match = of_match_ptr("regulator-vd10"),
+				.regulators_node = of_match_ptr("regulators"),
+				.id = BD957X_VD10,
+				.type = REGULATOR_VOLTAGE,
+				.fixed_uV = BD957X_VOUTS4_BASE_VOLT,
+				.n_voltages = BD957X_VOUTS34_NUM_VOLT,
+				.vsel_reg = BD957X_REG_VOUT4_TUNE,
+				.vsel_mask = BD957X_MASK_VOUT4_TUNE,
+				.enable_reg = BD957X_REG_POW_TRIGGER4,
+				.enable_mask = BD957X_REGULATOR_EN_MASK,
+				.enable_val = BD957X_REGULATOR_DIS_VAL,
+				.enable_is_inverted = true,
+				.owner = THIS_MODULE,
+			},
+			.xvd_ranges = vout234_xvd_ranges,
+			.num_xvd_ranges = ARRAY_SIZE(vout234_xvd_ranges),
+			.ovd_reg = BD9576_REG_VOUT4_OVD,
+			.uvd_reg = BD9576_REG_VOUT4_UVD,
+			.xvd_mask = BD9576_MASK_XVD,
 		},
-	},
-	{
-		.desc = {
-			.name = "VOUTL1",
-			.of_match = of_match_ptr("regulator-voutl1"),
-			.regulators_node = of_match_ptr("regulators"),
-			.id = BD957X_VOUTL1,
-			.ops = &bd957x_ops,
-			.type = REGULATOR_VOLTAGE,
-			.volt_table = &voutl1_volt_table[0],
-			.n_voltages = ARRAY_SIZE(voutl1_volt_table),
-			.vsel_reg = BD957X_REG_VOUTL1_TUNE,
-			.vsel_mask = BD957X_MASK_VOUTL1_TUNE,
-			.enable_reg = BD957X_REG_POW_TRIGGERL1,
-			.enable_mask = BD957X_REGULATOR_EN_MASK,
-			.enable_val = BD957X_REGULATOR_DIS_VAL,
-			.enable_is_inverted = true,
-			.owner = THIS_MODULE,
+		{
+			.desc = {
+				.name = "VOUTL1",
+				.of_match = of_match_ptr("regulator-voutl1"),
+				.regulators_node = of_match_ptr("regulators"),
+				.id = BD957X_VOUTL1,
+				.type = REGULATOR_VOLTAGE,
+				.volt_table = &voutl1_volt_table[0],
+				.n_voltages = ARRAY_SIZE(voutl1_volt_table),
+				.vsel_reg = BD957X_REG_VOUTL1_TUNE,
+				.vsel_mask = BD957X_MASK_VOUTL1_TUNE,
+				.enable_reg = BD957X_REG_POW_TRIGGERL1,
+				.enable_mask = BD957X_REGULATOR_EN_MASK,
+				.enable_val = BD957X_REGULATOR_DIS_VAL,
+				.enable_is_inverted = true,
+				.owner = THIS_MODULE,
+			},
+			.xvd_ranges = voutL1_xvd_ranges,
+			.num_xvd_ranges = ARRAY_SIZE(voutL1_xvd_ranges),
+			.ovd_reg = BD9576_REG_VOUTL1_OVD,
+			.uvd_reg = BD9576_REG_VOUTL1_UVD,
+			.xvd_mask = BD9576_MASK_XVD,
 		},
-	},
-	{
-		.desc = {
-			.name = "VOUTS1",
-			.of_match = of_match_ptr("regulator-vouts1"),
-			.regulators_node = of_match_ptr("regulators"),
-			.id = BD957X_VOUTS1,
-			.ops = &bd957X_vouts1_regulator_ops,
-			.type = REGULATOR_VOLTAGE,
-			.n_voltages = 1,
-			.fixed_uV = BD957X_VOUTS1_VOLT,
-			.enable_reg = BD957X_REG_POW_TRIGGERS1,
-			.enable_mask = BD957X_REGULATOR_EN_MASK,
-			.enable_val = BD957X_REGULATOR_DIS_VAL,
-			.enable_is_inverted = true,
-			.owner = THIS_MODULE,
+		{
+			.desc = {
+				.name = "VOUTS1",
+				.of_match = of_match_ptr("regulator-vouts1"),
+				.regulators_node = of_match_ptr("regulators"),
+				.id = BD957X_VOUTS1,
+				.type = REGULATOR_VOLTAGE,
+				.n_voltages = 1,
+				.fixed_uV = BD957X_VOUTS1_VOLT,
+				.enable_reg = BD957X_REG_POW_TRIGGERS1,
+				.enable_mask = BD957X_REGULATOR_EN_MASK,
+				.enable_val = BD957X_REGULATOR_DIS_VAL,
+				.enable_is_inverted = true,
+				.owner = THIS_MODULE,
+				.of_parse_cb = vouts1_get_fet_res,
+			},
+			.oc_supported = true,
+			.ocw_reg = BD9576_REG_VOUT1S_OCW,
+			.ocw_mask = BD9576_MASK_VOUT1S_OCW,
+			.ocp_reg = BD9576_REG_VOUT1S_OCP,
+			.ocp_mask = BD9576_MASK_VOUT1S_OCP,
 		},
 	},
 };
 
+static int bd9576_renable(struct regulator_irq_data *rid, int reg, int mask)
+{
+	int val, ret;
+	struct bd957x_data *d = (struct bd957x_data *)rid->data;
+
+	ret = regmap_read(d->regmap, reg, &val);
+	if (ret)
+		return REGULATOR_FAILED_RETRY;
+
+	if (rid->opaque && rid->opaque == (val & mask)) {
+		/*
+		 * It seems we stil have same status. Ack and return
+		 * information that we are still out of limits and core
+		 * should not enable IRQ
+		 */
+		regmap_write(d->regmap, reg, mask & val);
+		return REGULATOR_ERROR_ON;
+	}
+	rid->opaque = 0;
+	/*
+	 * Status was changed. Either prolem was solved or we have new issues.
+	 * Let's re-enable IRQs and be prepared to report problems again
+	 */
+	return REGULATOR_ERROR_CLEARED;
+}
+
+static int bd9576_uvd_renable(struct regulator_irq_data *rid)
+{
+	return bd9576_renable(rid, BD957X_REG_INT_UVD_STAT, UVD_IRQ_VALID_MASK);
+}
+
+static int bd9576_ovd_renable(struct regulator_irq_data *rid)
+{
+	return bd9576_renable(rid, BD957X_REG_INT_OVD_STAT, OVD_IRQ_VALID_MASK);
+}
+
+static int bd9576_temp_renable(struct regulator_irq_data *rid)
+{
+	return bd9576_renable(rid, BD957X_REG_INT_THERM_STAT,
+			      BD9576_THERM_IRQ_MASK_TW);
+}
+
+static int bd9576_uvd_handler(int irq, struct regulator_irq_data *rid,
+			      unsigned long *dev_mask)
+{
+	int val, ret, i;
+	struct bd957x_data *d = (struct bd957x_data *)rid->data;
+
+	ret = regmap_read(d->regmap, BD957X_REG_INT_UVD_STAT, &val);
+	if (ret)
+		return REGULATOR_FAILED_RETRY;
+
+	*dev_mask = 0;
+
+	rid->opaque = val & UVD_IRQ_VALID_MASK;
+
+	/*
+	 * Go through the set status bits and report either error or warning
+	 * to the notifier depending on what was flagged in DT
+	 */
+	*dev_mask = val & BD9576_xVD_IRQ_MASK_VOUT1TO4;
+	/* There is 1 bit gap in register after Vout1 .. Vout4 statuses */
+	*dev_mask |= ((val & BD9576_xVD_IRQ_MASK_VOUTL1) >> 1);
+	/*
+	 * We (ab)use the uvd for OCW notification. DT parsing should
+	 * have added correct OCW flag to uvd_notif and uvd_err for S1
+	 */
+	*dev_mask |= ((val & BD9576_UVD_IRQ_MASK_VOUTS1_OCW) >> 1);
+
+	for_each_set_bit(i, dev_mask, 6) {
+		struct bd957x_regulator_data *rdata;
+		struct regulator_err_state *stat;
+
+		rdata = &d->regulator_data[i];
+		stat  = &rid->states[i];
+
+		stat->notifs	= rdata->uvd_notif;
+		stat->errors	= rdata->uvd_err;
+	}
+
+	ret = regmap_write(d->regmap, BD957X_REG_INT_UVD_STAT,
+			   UVD_IRQ_VALID_MASK & val);
+
+	return 0;
+}
+
+static int bd9576_ovd_handler(int irq, struct regulator_irq_data *rid,
+			      unsigned long *dev_mask)
+{
+	int val, ret, i;
+	struct bd957x_data *d = (struct bd957x_data *)rid->data;
+
+	ret = regmap_read(d->regmap, BD957X_REG_INT_OVD_STAT, &val);
+	if (ret)
+		return REGULATOR_FAILED_RETRY;
+
+	rid->opaque = val & OVD_IRQ_VALID_MASK;
+	*dev_mask = 0;
+
+	if (!(val & OVD_IRQ_VALID_MASK))
+		return 0;
+
+	*dev_mask = val & BD9576_xVD_IRQ_MASK_VOUT1TO4;
+	/* There is 1 bit gap in register after Vout1 .. Vout4 statuses */
+	*dev_mask |= ((val & BD9576_xVD_IRQ_MASK_VOUTL1) >> 1);
+
+	for_each_set_bit(i, dev_mask, 5) {
+		struct bd957x_regulator_data *rdata;
+		struct regulator_err_state *stat;
+
+		rdata = &d->regulator_data[i];
+		stat  = &rid->states[i];
+
+		stat->notifs	= rdata->ovd_notif;
+		stat->errors	= rdata->ovd_err;
+	}
+
+	/* Clear the sub-IRQ status */
+	regmap_write(d->regmap, BD957X_REG_INT_OVD_STAT,
+		     OVD_IRQ_VALID_MASK & val);
+
+	return 0;
+}
+
+#define BD9576_DEV_MASK_ALL_REGULATORS 0x3F
+
+static int bd9576_thermal_handler(int irq, struct regulator_irq_data *rid,
+				  unsigned long *dev_mask)
+{
+	int val, ret, i;
+	struct bd957x_data *d = (struct bd957x_data *)rid->data;
+
+	ret = regmap_read(d->regmap, BD957X_REG_INT_THERM_STAT, &val);
+	if (ret)
+		return REGULATOR_FAILED_RETRY;
+
+	if (!(val & BD9576_THERM_IRQ_MASK_TW)) {
+		*dev_mask = 0;
+		return 0;
+	}
+
+	*dev_mask = BD9576_DEV_MASK_ALL_REGULATORS;
+
+	for (i = 0; i < BD9576_NUM_REGULATORS; i++) {
+		struct bd957x_regulator_data *rdata;
+		struct regulator_err_state *stat;
+
+		rdata = &d->regulator_data[i];
+		stat  = &rid->states[i];
+
+		stat->notifs	= rdata->temp_notif;
+		stat->errors	= rdata->temp_err;
+	}
+
+	/* Clear the sub-IRQ status */
+	regmap_write(d->regmap, BD957X_REG_INT_THERM_STAT,
+		     BD9576_THERM_IRQ_MASK_TW);
+
+	return 0;
+}
+
 static int bd957x_probe(struct platform_device *pdev)
 {
+	int i;
+	unsigned int num_reg_data;
+	bool vout_mode, ddr_sel, may_have_irqs;
 	struct regmap *regmap;
+	struct bd957x_data *ic_data;
 	struct regulator_config config = { 0 };
-	int i;
-	bool vout_mode, ddr_sel;
-	const struct bd957x_regulator_data *reg_data = &bd9576_regulators[0];
-	unsigned int num_reg_data = ARRAY_SIZE(bd9576_regulators);
+	/* All regulators are related to UVD and thermal IRQs... */
+	struct regulator_dev *rdevs[BD9576_NUM_REGULATORS];
+	/* ...But VoutS1 is not flagged by OVD IRQ */
+	struct regulator_dev *ovd_devs[BD9576_NUM_OVD_REGULATORS];
+	static const struct regulator_irq_desc bd9576_notif_uvd = {
+		.name = "bd9576-uvd",
+		.irq_off_ms = 1000,
+		.map_event = bd9576_uvd_handler,
+		.renable = bd9576_uvd_renable,
+		.data = &bd957x_regulators,
+	};
+	static const struct regulator_irq_desc bd9576_notif_ovd = {
+		.name = "bd9576-ovd",
+		.irq_off_ms = 1000,
+		.map_event = bd9576_ovd_handler,
+		.renable = bd9576_ovd_renable,
+		.data = &bd957x_regulators,
+	};
+	static const struct regulator_irq_desc bd9576_notif_temp = {
+		.name = "bd9576-temp",
+		.irq_off_ms = 1000,
+		.map_event = bd9576_thermal_handler,
+		.renable = bd9576_temp_renable,
+		.data = &bd957x_regulators,
+	};
 	enum rohm_chip_type chip = platform_get_device_id(pdev)->driver_data;
 
+	num_reg_data = ARRAY_SIZE(bd957x_regulators.regulator_data);
+
+	ic_data = &bd957x_regulators;
+
 	regmap = dev_get_regmap(pdev->dev.parent, NULL);
 	if (!regmap) {
 		dev_err(&pdev->dev, "No regmap\n");
 		return -EINVAL;
 	}
+
+	ic_data->regmap = regmap;
 	vout_mode = of_property_read_bool(pdev->dev.parent->of_node,
 					 "rohm,vout1-en-low");
 	if (vout_mode) {
@@ -263,15 +979,17 @@ static int bd957x_probe(struct platform_device *pdev)
 	 * bytes and use bd9576_regulators directly for non-constant configs
 	 * like DDR voltage selection.
 	 */
+	platform_set_drvdata(pdev, ic_data);
 	ddr_sel =  of_property_read_bool(pdev->dev.parent->of_node,
 					 "rohm,ddr-sel-low");
 	if (ddr_sel)
-		bd9576_regulators[2].desc.fixed_uV = 1350000;
+		ic_data->regulator_data[2].desc.fixed_uV = 1350000;
 	else
-		bd9576_regulators[2].desc.fixed_uV = 1500000;
+		ic_data->regulator_data[2].desc.fixed_uV = 1500000;
 
 	switch (chip) {
 	case ROHM_CHIP_TYPE_BD9576:
+		may_have_irqs = true;
 		dev_dbg(&pdev->dev, "Found BD9576MUF\n");
 		break;
 	case ROHM_CHIP_TYPE_BD9573:
@@ -282,32 +1000,116 @@ static int bd957x_probe(struct platform_device *pdev)
 		return -EINVAL;
 	}
 
+	for (i = 0; i < num_reg_data; i++) {
+		struct regulator_desc *d;
+
+		d = &ic_data->regulator_data[i].desc;
+
+
+		if (may_have_irqs) {
+			if (d->id >= ARRAY_SIZE(bd9576_ops_arr))
+				return -EINVAL;
+
+			d->ops = bd9576_ops_arr[d->id];
+		} else {
+			if (d->id >= ARRAY_SIZE(bd9573_ops_arr))
+				return -EINVAL;
+
+			d->ops = bd9573_ops_arr[d->id];
+		}
+	}
+
 	config.dev = pdev->dev.parent;
 	config.regmap = regmap;
+	config.driver_data = ic_data;
 
 	for (i = 0; i < num_reg_data; i++) {
 
-		const struct regulator_desc *desc;
-		struct regulator_dev *rdev;
-		const struct bd957x_regulator_data *r;
+		struct bd957x_regulator_data *r = &ic_data->regulator_data[i];
+		const struct regulator_desc *desc = &r->desc;
 
-		r = &reg_data[i];
-		desc = &r->desc;
-
-		rdev = devm_regulator_register(&pdev->dev, desc, &config);
-		if (IS_ERR(rdev)) {
+		r->rdev = devm_regulator_register(&pdev->dev, desc,
+							   &config);
+		if (IS_ERR(r->rdev)) {
 			dev_err(&pdev->dev,
 				"failed to register %s regulator\n",
 				desc->name);
-			return PTR_ERR(rdev);
+			return PTR_ERR(r->rdev);
 		}
 		/*
 		 * Clear the VOUT1 GPIO setting - rest of the regulators do not
 		 * support GPIO control
 		 */
 		config.ena_gpiod = NULL;
+
+		if (!may_have_irqs)
+			continue;
+
+		rdevs[i] = r->rdev;
+		if (i < BD957X_VOUTS1)
+			ovd_devs[i] = r->rdev;
 	}
+	if (may_have_irqs) {
+		void *ret;
+		/*
+		 * We can add both the possible error and warning flags here
+		 * because the core uses these only for status clearing and
+		 * if we use warnings - errors are always clear and the other
+		 * way around. We can also add CURRENT flag for all regulators
+		 * because it is never set if it is not supported. Same applies
+		 * to setting UVD for VoutS1 - it is not accidentally cleared
+		 * as it is never set.
+		 */
+		int uvd_errs = REGULATOR_ERROR_UNDER_VOLTAGE |
+			       REGULATOR_ERROR_UNDER_VOLTAGE_WARN |
+			       REGULATOR_ERROR_OVER_CURRENT |
+			       REGULATOR_ERROR_OVER_CURRENT_WARN;
+		int ovd_errs = REGULATOR_ERROR_OVER_VOLTAGE_WARN |
+			       REGULATOR_ERROR_REGULATION_OUT;
+		int temp_errs = REGULATOR_ERROR_OVER_TEMP |
+				REGULATOR_ERROR_OVER_TEMP_WARN;
+		int irq;
+
+		irq = platform_get_irq_byname(pdev, "bd9576-uvd");
+
+		/* Register notifiers - can fail if IRQ is not given */
+		ret = devm_regulator_irq_helper(&pdev->dev, &bd9576_notif_uvd,
+						irq, 0, uvd_errs, NULL,
+						&rdevs[0],
+						BD9576_NUM_REGULATORS);
+		if (IS_ERR(ret)) {
+			if (PTR_ERR(ret) == -EPROBE_DEFER)
+				return -EPROBE_DEFER;
+
+			dev_warn(&pdev->dev, "UVD disabled %pe\n", ret);
+		}
+
+		irq = platform_get_irq_byname(pdev, "bd9576-ovd");
+
+		ret = devm_regulator_irq_helper(&pdev->dev, &bd9576_notif_ovd,
+						irq, 0, ovd_errs, NULL,
+						&ovd_devs[0],
+						BD9576_NUM_OVD_REGULATORS);
+		if (IS_ERR(ret)) {
+			if (PTR_ERR(ret) == -EPROBE_DEFER)
+				return -EPROBE_DEFER;
+
+			dev_warn(&pdev->dev, "OVD disabled %pe\n", ret);
+		}
+		irq = platform_get_irq_byname(pdev, "bd9576-temp");
+
+		ret = devm_regulator_irq_helper(&pdev->dev, &bd9576_notif_temp,
+						irq, 0, temp_errs, NULL,
+						&rdevs[0],
+						BD9576_NUM_REGULATORS);
+		if (IS_ERR(ret)) {
+			if (PTR_ERR(ret) == -EPROBE_DEFER)
+				return -EPROBE_DEFER;
 
+			dev_warn(&pdev->dev, "Thermal warning disabled %pe\n",
+				 ret);
+		}
+	}
 	return 0;
 }
 
-- 
cgit v1.2.3-59-g8ed1b


From e71e7d3df7eb712fc29b609bd712a63d60b81b5f Mon Sep 17 00:00:00 2001
From: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Date: Thu, 3 Jun 2021 08:43:04 +0300
Subject: regulator: bd9576: Fix the driver name in id table

Driver name was changed in MFD cell:
https://lore.kernel.org/lkml/560b9748094392493ebf7af11b6cc558776c4fd5.1613031055.git.matti.vaittinen@fi.rohmeurope.com/
Fix the ID table to match this.

Fixes: b1b3ced38979 ("mfd: Support ROHM BD9576MUF and BD9573MUF")
Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Link: https://lore.kernel.org/r/e0483149333626b3bea298f305cf2809429d1822.1622628334.git.matti.vaittinen@fi.rohmeurope.com
Signed-off-by: Mark Brown <broonie@kernel.org>
---
 drivers/regulator/bd9576-regulator.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'drivers/regulator')

diff --git a/drivers/regulator/bd9576-regulator.c b/drivers/regulator/bd9576-regulator.c
index 6ba12af4c632..d78d6127c573 100644
--- a/drivers/regulator/bd9576-regulator.c
+++ b/drivers/regulator/bd9576-regulator.c
@@ -1114,8 +1114,8 @@ static int bd957x_probe(struct platform_device *pdev)
 }
 
 static const struct platform_device_id bd957x_pmic_id[] = {
-	{ "bd9573-pmic", ROHM_CHIP_TYPE_BD9573 },
-	{ "bd9576-pmic", ROHM_CHIP_TYPE_BD9576 },
+	{ "bd9573-regulator", ROHM_CHIP_TYPE_BD9573 },
+	{ "bd9576-regulator", ROHM_CHIP_TYPE_BD9576 },
 	{ },
 };
 MODULE_DEVICE_TABLE(platform, bd957x_pmic_id);
-- 
cgit v1.2.3-59-g8ed1b


From 9bc146acc33125cd9f365b92f1c02ec89f639977 Mon Sep 17 00:00:00 2001
From: Axel Lin <axel.lin@ingics.com>
Date: Tue, 22 Jun 2021 12:33:29 +0800
Subject: regulator: hi6421v600: Fix setting wrong driver_data

Current code set "config.driver_data = sreg" but sreg only init the mutex,
the othere fields are just zero. Fix it by pass *info to config.driver_data
so each regulator can get corresponding data by rdev_get_drvdata().

Separate enable_mutex from struct hi6421_spmi_reg_info since only need one
mutex for the driver.

Fixes: d2dfd50a0b57 ("staging: hikey9xx: hi6421v600-regulator: move LDO config from DT")
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Link: https://lore.kernel.org/r/20210622043329.392072-1-axel.lin@ingics.com
Signed-off-by: Mark Brown <broonie@kernel.org>
---
 drivers/regulator/hi6421v600-regulator.c | 26 +++++++++++++++-----------
 1 file changed, 15 insertions(+), 11 deletions(-)

(limited to 'drivers/regulator')

diff --git a/drivers/regulator/hi6421v600-regulator.c b/drivers/regulator/hi6421v600-regulator.c
index cf14109d486f..48922704f0e1 100644
--- a/drivers/regulator/hi6421v600-regulator.c
+++ b/drivers/regulator/hi6421v600-regulator.c
@@ -16,13 +16,15 @@
 #include <linux/regulator/driver.h>
 #include <linux/spmi.h>
 
+struct hi6421_spmi_reg_priv {
+	/* Serialize regulator enable logic */
+	struct mutex enable_mutex;
+};
+
 struct hi6421_spmi_reg_info {
 	struct regulator_desc	desc;
 	u8			eco_mode_mask;
 	u32			eco_uA;
-
-	/* Serialize regulator enable logic */
-	struct mutex enable_mutex;
 };
 
 static const unsigned int ldo3_voltages[] = {
@@ -96,11 +98,12 @@ static const unsigned int ldo34_voltages[] = {
 
 static int hi6421_spmi_regulator_enable(struct regulator_dev *rdev)
 {
-	struct hi6421_spmi_reg_info *sreg = rdev_get_drvdata(rdev);
+	struct hi6421_spmi_reg_priv *priv;
 	int ret;
 
+	priv = dev_get_drvdata(rdev->dev.parent);
 	/* cannot enable more than one regulator at one time */
-	mutex_lock(&sreg->enable_mutex);
+	mutex_lock(&priv->enable_mutex);
 
 	ret = regmap_update_bits(rdev->regmap, rdev->desc->enable_reg,
 				 rdev->desc->enable_mask,
@@ -109,7 +112,7 @@ static int hi6421_spmi_regulator_enable(struct regulator_dev *rdev)
 	/* Avoid powering up multiple devices at the same time */
 	usleep_range(rdev->desc->off_on_delay, rdev->desc->off_on_delay + 60);
 
-	mutex_unlock(&sreg->enable_mutex);
+	mutex_unlock(&priv->enable_mutex);
 
 	return ret;
 }
@@ -228,7 +231,7 @@ static int hi6421_spmi_regulator_probe(struct platform_device *pdev)
 {
 	struct device *pmic_dev = pdev->dev.parent;
 	struct regulator_config config = { };
-	struct hi6421_spmi_reg_info *sreg;
+	struct hi6421_spmi_reg_priv *priv;
 	struct hi6421_spmi_reg_info *info;
 	struct device *dev = &pdev->dev;
 	struct hi6421_spmi_pmic *pmic;
@@ -244,17 +247,18 @@ static int hi6421_spmi_regulator_probe(struct platform_device *pdev)
 	if (WARN_ON(!pmic))
 		return -ENODEV;
 
-	sreg = devm_kzalloc(dev, sizeof(*sreg), GFP_KERNEL);
-	if (!sreg)
+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
 		return -ENOMEM;
 
-	mutex_init(&sreg->enable_mutex);
+	mutex_init(&priv->enable_mutex);
+	platform_set_drvdata(pdev, priv);
 
 	for (i = 0; i < ARRAY_SIZE(regulator_info); i++) {
 		info = &regulator_info[i];
 
 		config.dev = pdev->dev.parent;
-		config.driver_data = sreg;
+		config.driver_data = info;
 		config.regmap = pmic->regmap;
 
 		rdev = devm_regulator_register(dev, &info->desc, &config);
-- 
cgit v1.2.3-59-g8ed1b


From a336dc8f683e5be794186b5643cd34cb28dd2c53 Mon Sep 17 00:00:00 2001
From: Axel Lin <axel.lin@ingics.com>
Date: Fri, 18 Jun 2021 22:14:11 +0800
Subject: regulator: da9052: Ensure enough delay time for .set_voltage_time_sel

Use DIV_ROUND_UP to prevent truncation by integer division issue.
This ensures we return enough delay time.

Also fix returning negative value when new_sel < old_sel.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Link: https://lore.kernel.org/r/20210618141412.4014912-1-axel.lin@ingics.com
Signed-off-by: Mark Brown <broonie@kernel.org>
---
 drivers/regulator/da9052-regulator.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

(limited to 'drivers/regulator')

diff --git a/drivers/regulator/da9052-regulator.c b/drivers/regulator/da9052-regulator.c
index e18d291c7f21..23fa429ebe76 100644
--- a/drivers/regulator/da9052-regulator.c
+++ b/drivers/regulator/da9052-regulator.c
@@ -250,7 +250,8 @@ static int da9052_regulator_set_voltage_time_sel(struct regulator_dev *rdev,
 	case DA9052_ID_BUCK3:
 	case DA9052_ID_LDO2:
 	case DA9052_ID_LDO3:
-		ret = (new_sel - old_sel) * info->step_uV / 6250;
+		ret = DIV_ROUND_UP(abs(new_sel - old_sel) * info->step_uV,
+				   6250);
 		break;
 	}
 
-- 
cgit v1.2.3-59-g8ed1b


From 1aeb1a72f330a0fa21610fb44769cd0e68379418 Mon Sep 17 00:00:00 2001
From: Axel Lin <axel.lin@ingics.com>
Date: Tue, 22 Jun 2021 22:15:26 +0800
Subject: regulator: max8893: Select REGMAP_I2C to fix build error

Fix build error if REGMAP_I2C is not set.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Link: https://lore.kernel.org/r/20210622141526.472175-1-axel.lin@ingics.com
Signed-off-by: Mark Brown <broonie@kernel.org>
---
 drivers/regulator/Kconfig | 1 +
 1 file changed, 1 insertion(+)

(limited to 'drivers/regulator')

diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
index 7c39570b99b0..3a71b020ea1c 100644
--- a/drivers/regulator/Kconfig
+++ b/drivers/regulator/Kconfig
@@ -581,6 +581,7 @@ config REGULATOR_MAX8660
 config REGULATOR_MAX8893
 	tristate "Maxim 8893 voltage regulator"
 	depends on I2C
+	select REGMAP_I2C
 	help
 	  This driver controls a Maxim 8893 voltage output
 	  regulator via I2C bus.
-- 
cgit v1.2.3-59-g8ed1b


From ddf275b219ab22bc07c14ac88c290694089dced0 Mon Sep 17 00:00:00 2001
From: Colin Ian King <colin.king@canonical.com>
Date: Tue, 22 Jun 2021 15:47:30 +0100
Subject: regulator: bd9576: Fix uninitializes variable may_have_irqs

The boolean variable may_have_irqs is not ininitialized and is
only being set to true in the case where chip is ROHM_CHIP_TYPE_BD9576.
Fix this by ininitialized may_have_irqs to false.

Addresses-Coverity: ("Uninitialized scalar variable")
Fixes: e7bf1fa58c46 ("regulator: bd9576: Support error reporting")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Link: https://lore.kernel.org/r/20210622144730.22821-1-colin.king@canonical.com
Signed-off-by: Mark Brown <broonie@kernel.org>
---
 drivers/regulator/bd9576-regulator.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/regulator')

diff --git a/drivers/regulator/bd9576-regulator.c b/drivers/regulator/bd9576-regulator.c
index 8b54d88827be..e16c3727db7a 100644
--- a/drivers/regulator/bd9576-regulator.c
+++ b/drivers/regulator/bd9576-regulator.c
@@ -897,7 +897,7 @@ static int bd957x_probe(struct platform_device *pdev)
 {
 	int i;
 	unsigned int num_reg_data;
-	bool vout_mode, ddr_sel, may_have_irqs;
+	bool vout_mode, ddr_sel, may_have_irqs = false;
 	struct regmap *regmap;
 	struct bd957x_data *ic_data;
 	struct regulator_config config = { 0 };
-- 
cgit v1.2.3-59-g8ed1b