From b24a7267709bb0adb694364572478f919e9c7390 Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Fri, 23 Mar 2012 15:02:37 -0700 Subject: rtc: ds1307: simplify irq setup code No need to have two seperate if-blocks for setting up the irq. Signed-off-by: Wolfram Sang Tested-by: David Anders Cc: Austin Boyle Cc: Alessandro Zummo Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/rtc/rtc-ds1307.c | 11 +++++------ 1 file changed, 5 insertions(+), 6 deletions(-) (limited to 'drivers/rtc/rtc-ds1307.c') diff --git a/drivers/rtc/rtc-ds1307.c b/drivers/rtc/rtc-ds1307.c index 5098e1ad3a3e..d4543e8730cb 100644 --- a/drivers/rtc/rtc-ds1307.c +++ b/drivers/rtc/rtc-ds1307.c @@ -646,11 +646,6 @@ static int __devinit ds1307_probe(struct i2c_client *client, case ds_1337: case ds_1339: case ds_3231: - /* has IRQ? */ - if (ds1307->client->irq > 0 && chip->alarm) { - INIT_WORK(&ds1307->work, ds1307_work); - want_irq = true; - } /* get registers that the "rtc" read below won't read... */ tmp = ds1307->read_block_data(ds1307->client, DS1337_REG_CONTROL, 2, buf); @@ -668,10 +663,14 @@ static int __devinit ds1307_probe(struct i2c_client *client, * For some variants, be sure alarms can trigger when we're * running on Vbackup (BBSQI/BBSQW) */ - if (want_irq) { + if (ds1307->client->irq > 0 && chip->alarm) { + INIT_WORK(&ds1307->work, ds1307_work); + ds1307->regs[0] |= DS1337_BIT_INTCN | bbsqi_bitpos[ds1307->type]; ds1307->regs[0] &= ~(DS1337_BIT_A2IE | DS1337_BIT_A1IE); + + want_irq = true; } i2c_smbus_write_byte_data(client, DS1337_REG_CONTROL, -- cgit v1.2.3-59-g8ed1b