From 83c6cb1ae8be6948b5fa43b2450a176dba80688b Mon Sep 17 00:00:00 2001 From: James Smart Date: Fri, 18 Oct 2019 14:18:30 -0700 Subject: scsi: lpfc: Add FC-AL support to lpe32000 models In the past, the lpe32000 models, based their main support being for 32G, and as FC-AL is not supported in the FC standards past 8G, did not support FC-AL operation. This patch adds private-loop FC-AL support for the LPE32000 adapters when a link is 8G or below. To avoid conditions where link rate may change, which would cause non-connectivity to the AL device, FC-AL mode must become a persistent setting and the link kept at a speed supporting FC-AL. The patch: - Adds a pls attribute indicating whether the adapter properly supports FC-AL. - Adds support for the adapter to indicate that topology should be fixed and the topology types to be configured. - Adds a pt attribute to report the persistent topology if present. Link: https://lore.kernel.org/r/20191018211832.7917-15-jsmart2021@gmail.com Signed-off-by: Dick Kennedy Signed-off-by: James Smart Signed-off-by: Martin K. Petersen --- drivers/scsi/lpfc/lpfc.h | 1 + drivers/scsi/lpfc/lpfc_attr.c | 38 +++++++++++++++++- drivers/scsi/lpfc/lpfc_hw4.h | 12 ++++++ drivers/scsi/lpfc/lpfc_init.c | 90 +++++++++++++++++++++++++++++++++++++++++++ drivers/scsi/lpfc/lpfc_mbox.c | 1 + drivers/scsi/lpfc/lpfc_sli4.h | 1 + 6 files changed, 142 insertions(+), 1 deletion(-) (limited to 'drivers/scsi/lpfc') diff --git a/drivers/scsi/lpfc/lpfc.h b/drivers/scsi/lpfc/lpfc.h index 884d6076d7aa..4559f1700c6d 100644 --- a/drivers/scsi/lpfc/lpfc.h +++ b/drivers/scsi/lpfc/lpfc.h @@ -731,6 +731,7 @@ struct lpfc_hba { #define HBA_FCOE_MODE 0x4 /* HBA function in FCoE Mode */ #define HBA_SP_QUEUE_EVT 0x8 /* Slow-path qevt posted to worker thread*/ #define HBA_POST_RECEIVE_BUFFER 0x10 /* Rcv buffers need to be posted */ +#define HBA_PERSISTENT_TOPO 0x20 /* Persistent topology support in hba */ #define ELS_XRI_ABORT_EVENT 0x40 #define ASYNC_EVENT 0x80 #define LINK_DISABLED 0x100 /* Link disabled by user */ diff --git a/drivers/scsi/lpfc/lpfc_attr.c b/drivers/scsi/lpfc/lpfc_attr.c index ba504cc6e8ed..e738c1529d2d 100644 --- a/drivers/scsi/lpfc/lpfc_attr.c +++ b/drivers/scsi/lpfc/lpfc_attr.c @@ -3535,6 +3535,31 @@ LPFC_ATTR_R(enable_rrq, 2, 0, 2, LPFC_ATTR_R(suppress_link_up, LPFC_INITIALIZE_LINK, LPFC_INITIALIZE_LINK, LPFC_DELAY_INIT_LINK_INDEFINITELY, "Suppress Link Up at initialization"); + +static ssize_t +lpfc_pls_show(struct device *dev, struct device_attribute *attr, char *buf) +{ + struct Scsi_Host *shost = class_to_shost(dev); + struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba; + + return scnprintf(buf, PAGE_SIZE, "%d\n", + phba->sli4_hba.pc_sli4_params.pls); +} +static DEVICE_ATTR(pls, 0444, + lpfc_pls_show, NULL); + +static ssize_t +lpfc_pt_show(struct device *dev, struct device_attribute *attr, char *buf) +{ + struct Scsi_Host *shost = class_to_shost(dev); + struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba; + + return scnprintf(buf, PAGE_SIZE, "%d\n", + (phba->hba_flag & HBA_PERSISTENT_TOPO) ? 1 : 0); +} +static DEVICE_ATTR(pt, 0444, + lpfc_pt_show, NULL); + /* # lpfc_cnt: Number of IOCBs allocated for ELS, CT, and ABTS # 1 - (1024) @@ -4095,7 +4120,16 @@ lpfc_topology_store(struct device *dev, struct device_attribute *attr, val); return -EINVAL; } - if ((phba->pcidev->device == PCI_DEVICE_ID_LANCER_G6_FC || + /* + * The 'topology' is not a configurable parameter if : + * - persistent topology enabled + * - G7 adapters + * - G6 with no private loop support + */ + + if (((phba->hba_flag & HBA_PERSISTENT_TOPO) || + (!phba->sli4_hba.pc_sli4_params.pls && + phba->pcidev->device == PCI_DEVICE_ID_LANCER_G6_FC) || phba->pcidev->device == PCI_DEVICE_ID_LANCER_G7_FC) && val == 4) { lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT, @@ -6117,6 +6151,8 @@ struct device_attribute *lpfc_hba_attrs[] = { &dev_attr_lpfc_req_fw_upgrade, &dev_attr_lpfc_suppress_link_up, &dev_attr_iocb_hw, + &dev_attr_pls, + &dev_attr_pt, &dev_attr_txq_hw, &dev_attr_txcmplq_hw, &dev_attr_lpfc_fips_level, diff --git a/drivers/scsi/lpfc/lpfc_hw4.h b/drivers/scsi/lpfc/lpfc_hw4.h index 818a0f4325af..d40bfe5aa21f 100644 --- a/drivers/scsi/lpfc/lpfc_hw4.h +++ b/drivers/scsi/lpfc/lpfc_hw4.h @@ -2809,6 +2809,15 @@ struct lpfc_mbx_read_config { #define lpfc_mbx_rd_conf_trunk_SHIFT 12 #define lpfc_mbx_rd_conf_trunk_MASK 0x0000000F #define lpfc_mbx_rd_conf_trunk_WORD word2 +#define lpfc_mbx_rd_conf_pt_SHIFT 20 +#define lpfc_mbx_rd_conf_pt_MASK 0x00000003 +#define lpfc_mbx_rd_conf_pt_WORD word2 +#define lpfc_mbx_rd_conf_tf_SHIFT 22 +#define lpfc_mbx_rd_conf_tf_MASK 0x00000001 +#define lpfc_mbx_rd_conf_tf_WORD word2 +#define lpfc_mbx_rd_conf_ptv_SHIFT 23 +#define lpfc_mbx_rd_conf_ptv_MASK 0x00000001 +#define lpfc_mbx_rd_conf_ptv_WORD word2 #define lpfc_mbx_rd_conf_topology_SHIFT 24 #define lpfc_mbx_rd_conf_topology_MASK 0x000000FF #define lpfc_mbx_rd_conf_topology_WORD word2 @@ -3479,6 +3488,9 @@ struct lpfc_sli4_parameters { #define cfg_bv1s_SHIFT 10 #define cfg_bv1s_MASK 0x00000001 #define cfg_bv1s_WORD word19 +#define cfg_pvl_SHIFT 13 +#define cfg_pvl_MASK 0x00000001 +#define cfg_pvl_WORD word19 #define cfg_nsler_SHIFT 12 #define cfg_nsler_MASK 0x00000001 diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c index d821adbb0047..686677dd52a4 100644 --- a/drivers/scsi/lpfc/lpfc_init.c +++ b/drivers/scsi/lpfc/lpfc_init.c @@ -8239,6 +8239,94 @@ lpfc_destroy_bootstrap_mbox(struct lpfc_hba *phba) memset(&phba->sli4_hba.bmbx, 0, sizeof(struct lpfc_bmbx)); } +static const char * const lpfc_topo_to_str[] = { + "Loop then P2P", + "Loopback", + "P2P Only", + "Unsupported", + "Loop Only", + "Unsupported", + "P2P then Loop", +}; + +/** + * lpfc_map_topology - Map the topology read from READ_CONFIG + * @phba: pointer to lpfc hba data structure. + * @rdconf: pointer to read config data + * + * This routine is invoked to map the topology values as read + * from the read config mailbox command. If the persistent + * topology feature is supported, the firmware will provide the + * saved topology information to be used in INIT_LINK + * + **/ +#define LINK_FLAGS_DEF 0x0 +#define LINK_FLAGS_P2P 0x1 +#define LINK_FLAGS_LOOP 0x2 +static void +lpfc_map_topology(struct lpfc_hba *phba, struct lpfc_mbx_read_config *rd_config) +{ + u8 ptv, tf, pt; + + ptv = bf_get(lpfc_mbx_rd_conf_ptv, rd_config); + tf = bf_get(lpfc_mbx_rd_conf_tf, rd_config); + pt = bf_get(lpfc_mbx_rd_conf_pt, rd_config); + + lpfc_printf_log(phba, KERN_INFO, LOG_SLI, + "2027 Read Config Data : ptv:0x%x, tf:0x%x pt:0x%x", + ptv, tf, pt); + if (!ptv) { + lpfc_printf_log(phba, KERN_WARNING, LOG_SLI, + "2019 FW does not support persistent topology " + "Using driver parameter defined value [%s]", + lpfc_topo_to_str[phba->cfg_topology]); + return; + } + /* FW supports persistent topology - override module parameter value */ + phba->hba_flag |= HBA_PERSISTENT_TOPO; + switch (phba->pcidev->device) { + case PCI_DEVICE_ID_LANCER_G7_FC: + if (tf || (pt == LINK_FLAGS_LOOP)) { + /* Invalid values from FW - use driver params */ + phba->hba_flag &= ~HBA_PERSISTENT_TOPO; + } else { + /* Prism only supports PT2PT topology */ + phba->cfg_topology = FLAGS_TOPOLOGY_MODE_PT_PT; + } + break; + case PCI_DEVICE_ID_LANCER_G6_FC: + if (!tf) { + phba->cfg_topology = ((pt == LINK_FLAGS_LOOP) + ? FLAGS_TOPOLOGY_MODE_LOOP + : FLAGS_TOPOLOGY_MODE_PT_PT); + } else { + phba->hba_flag &= ~HBA_PERSISTENT_TOPO; + } + break; + default: /* G5 */ + if (tf) { + /* If topology failover set - pt is '0' or '1' */ + phba->cfg_topology = (pt ? FLAGS_TOPOLOGY_MODE_PT_LOOP : + FLAGS_TOPOLOGY_MODE_LOOP_PT); + } else { + phba->cfg_topology = ((pt == LINK_FLAGS_P2P) + ? FLAGS_TOPOLOGY_MODE_PT_PT + : FLAGS_TOPOLOGY_MODE_LOOP); + } + break; + } + if (phba->hba_flag & HBA_PERSISTENT_TOPO) { + lpfc_printf_log(phba, KERN_INFO, LOG_SLI, + "2020 Using persistent topology value [%s]", + lpfc_topo_to_str[phba->cfg_topology]); + } else { + lpfc_printf_log(phba, KERN_WARNING, LOG_SLI, + "2021 Invalid topology values from FW " + "Using driver parameter defined value [%s]", + lpfc_topo_to_str[phba->cfg_topology]); + } +} + /** * lpfc_sli4_read_config - Get the config parameters. * @phba: pointer to lpfc hba data structure. @@ -8350,6 +8438,7 @@ lpfc_sli4_read_config(struct lpfc_hba *phba) phba->max_vpi = (phba->sli4_hba.max_cfg_param.max_vpi > 0) ? (phba->sli4_hba.max_cfg_param.max_vpi - 1) : 0; phba->max_vports = phba->max_vpi; + lpfc_map_topology(phba, rd_config); lpfc_printf_log(phba, KERN_INFO, LOG_SLI, "2003 cfg params Extents? %d " "XRI(B:%d M:%d), " @@ -11542,6 +11631,7 @@ lpfc_get_sli4_parameters(struct lpfc_hba *phba, LPFC_MBOXQ_t *mboxq) sli4_params->cqav = bf_get(cfg_cqav, mbx_sli4_parameters); sli4_params->wqsize = bf_get(cfg_wqsize, mbx_sli4_parameters); sli4_params->bv1s = bf_get(cfg_bv1s, mbx_sli4_parameters); + sli4_params->pls = bf_get(cfg_pvl, mbx_sli4_parameters); sli4_params->sgl_pages_max = bf_get(cfg_sgl_page_cnt, mbx_sli4_parameters); sli4_params->wqpcnt = bf_get(cfg_wqpcnt, mbx_sli4_parameters); diff --git a/drivers/scsi/lpfc/lpfc_mbox.c b/drivers/scsi/lpfc/lpfc_mbox.c index 8abe933bad09..d1773c01d2b3 100644 --- a/drivers/scsi/lpfc/lpfc_mbox.c +++ b/drivers/scsi/lpfc/lpfc_mbox.c @@ -515,6 +515,7 @@ lpfc_init_link(struct lpfc_hba * phba, if ((phba->pcidev->device == PCI_DEVICE_ID_LANCER_G6_FC || phba->pcidev->device == PCI_DEVICE_ID_LANCER_G7_FC) && + !(phba->sli4_hba.pc_sli4_params.pls) && mb->un.varInitLnk.link_flags & FLAGS_TOPOLOGY_MODE_LOOP) { mb->un.varInitLnk.link_flags = FLAGS_TOPOLOGY_MODE_PT_PT; phba->cfg_topology = FLAGS_TOPOLOGY_MODE_PT_PT; diff --git a/drivers/scsi/lpfc/lpfc_sli4.h b/drivers/scsi/lpfc/lpfc_sli4.h index c9e068ca0fec..bbe24c19b1d9 100644 --- a/drivers/scsi/lpfc/lpfc_sli4.h +++ b/drivers/scsi/lpfc/lpfc_sli4.h @@ -514,6 +514,7 @@ struct lpfc_pc_sli4_params { uint8_t cqav; uint8_t wqsize; uint8_t bv1s; + uint8_t pls; #define LPFC_WQ_SZ64_SUPPORT 1 #define LPFC_WQ_SZ128_SUPPORT 2 uint8_t wqpcnt; -- cgit v1.2.3-59-g8ed1b