From bdff549ebeff92b1a6952e5501caf16a6f8898c8 Mon Sep 17 00:00:00 2001 From: David Brownell Date: Mon, 13 Apr 2009 14:39:57 -0700 Subject: spi: spi_write_then_read() bugfixes The "simplify spi_write_then_read()" patch included two regressions from the 2.6.27 behaviors: - The data it wrote out during the (full duplex) read side of the transfer was not zeroed. - It fails completely on half duplex hardware, such as Microwire and most "3-wire" SPI variants. So, revert that patch. A revised version should be submitted at some point, which can get the speedup on standard hardware (full duplex) without breaking on less-capable half-duplex stuff. Signed-off-by: David Brownell Cc: [2.6.28.x, 2.6.29.x] Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/spi/spi.c | 22 ++++++++++++++-------- 1 file changed, 14 insertions(+), 8 deletions(-) (limited to 'drivers/spi/spi.c') diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c index 643908b74bc0..8eba98c8ed1e 100644 --- a/drivers/spi/spi.c +++ b/drivers/spi/spi.c @@ -658,7 +658,7 @@ int spi_write_then_read(struct spi_device *spi, int status; struct spi_message message; - struct spi_transfer x; + struct spi_transfer x[2]; u8 *local_buf; /* Use preallocated DMA-safe buffer. We can't avoid copying here, @@ -669,9 +669,15 @@ int spi_write_then_read(struct spi_device *spi, return -EINVAL; spi_message_init(&message); - memset(&x, 0, sizeof x); - x.len = n_tx + n_rx; - spi_message_add_tail(&x, &message); + memset(x, 0, sizeof x); + if (n_tx) { + x[0].len = n_tx; + spi_message_add_tail(&x[0], &message); + } + if (n_rx) { + x[1].len = n_rx; + spi_message_add_tail(&x[1], &message); + } /* ... unless someone else is using the pre-allocated buffer */ if (!mutex_trylock(&lock)) { @@ -682,15 +688,15 @@ int spi_write_then_read(struct spi_device *spi, local_buf = buf; memcpy(local_buf, txbuf, n_tx); - x.tx_buf = local_buf; - x.rx_buf = local_buf; + x[0].tx_buf = local_buf; + x[1].rx_buf = local_buf + n_tx; /* do the i/o */ status = spi_sync(spi, &message); if (status == 0) - memcpy(rxbuf, x.rx_buf + n_tx, n_rx); + memcpy(rxbuf, x[1].rx_buf, n_rx); - if (x.tx_buf == buf) + if (x[0].tx_buf == buf) mutex_unlock(&lock); else kfree(local_buf); -- cgit v1.2.3-59-g8ed1b