From 9e4701eaef02e1192faca2d0b3529249522f6253 Mon Sep 17 00:00:00 2001 From: Brian Masney Date: Wed, 21 Mar 2018 06:29:03 -0400 Subject: staging: iio: tsl2x7x: correct interrupt handler trigger tsl2x7x_event_handler() was not called as expected when the device was asserting a hardware interrupt. This patch changes the interrupt line trigger from rising to falling. The driver was tested on a TSL2772 hooked up to a Raspberry Pi 2. The interrupt pin also had a 10K pull-up resistor per the requirements from the datasheet. The relevant device tree binding: &i2c1 { tsl2772@39 { compatible = "amstaos,tsl2772"; reg = <0x39>; interrupt-parent = <&gpio>; interrupts = <22 0x2>; }; }; With this patch, iio_event_monitor now shows the events when the channels are outside the defined interrupt thresholds. $ sudo ./iio_event_monitor tsl2772 Found IIO device with name tsl2772 with device number 0 Event: time: 1478193460053760446, type: proximity, channel: 0, evtype: thresh, direction: either ... Event: time: 1478193463020270185, type: illuminance, channel: 0, evtype: thresh, direction: either ... Signed-off-by: Brian Masney Signed-off-by: Jonathan Cameron --- drivers/staging/iio/light/tsl2x7x.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/staging/iio') diff --git a/drivers/staging/iio/light/tsl2x7x.c b/drivers/staging/iio/light/tsl2x7x.c index 82cf9d853b18..59921850a226 100644 --- a/drivers/staging/iio/light/tsl2x7x.c +++ b/drivers/staging/iio/light/tsl2x7x.c @@ -1763,7 +1763,7 @@ static int tsl2x7x_probe(struct i2c_client *clientp, ret = devm_request_threaded_irq(&clientp->dev, clientp->irq, NULL, &tsl2x7x_event_handler, - IRQF_TRIGGER_RISING | + IRQF_TRIGGER_FALLING | IRQF_ONESHOT, "TSL2X7X_event", indio_dev); -- cgit v1.2.3-59-g8ed1b