From 5a7df3c449e7db7cf4b7807862e11f11c47c2331 Mon Sep 17 00:00:00 2001 From: Lars Lindley Date: Sun, 28 Mar 2010 21:52:37 +0200 Subject: Staging: winbond: wbhal_s.h Coding style fixes. I fixed checkpatch warnings except some long lines and typedefs. I also removed versioning comments. Signed-off-by: Lars Lindley Acked-by: Pavel Machek Signed-off-by: Greg Kroah-Hartman --- drivers/staging/winbond/wbhal_s.h | 502 ++++++++++++++++++-------------------- 1 file changed, 242 insertions(+), 260 deletions(-) (limited to 'drivers/staging/winbond') diff --git a/drivers/staging/winbond/wbhal_s.h b/drivers/staging/winbond/wbhal_s.h index 372a05e3021a..33457c2e39be 100644 --- a/drivers/staging/winbond/wbhal_s.h +++ b/drivers/staging/winbond/wbhal_s.h @@ -4,179 +4,166 @@ #include #include /* for ETH_ALEN */ -//[20040722 WK] -#define HAL_LED_SET_MASK 0x001c //20060901 Extend -#define HAL_LED_SET_SHIFT 2 +#define HAL_LED_SET_MASK 0x001c +#define HAL_LED_SET_SHIFT 2 -//supported RF type +/* supported RF type */ #define RF_MAXIM_2825 0 #define RF_MAXIM_2827 1 #define RF_MAXIM_2828 2 #define RF_MAXIM_2829 3 -#define RF_MAXIM_V1 15 +#define RF_MAXIM_V1 15 #define RF_AIROHA_2230 16 #define RF_AIROHA_7230 17 -#define RF_AIROHA_2230S 18 // 20060420 Add this -// #define RF_RFMD_2959 32 // 20060626 Remove all about RFMD -#define RF_WB_242 33 -#define RF_WB_242_1 34 // 20060619.5 Add +#define RF_AIROHA_2230S 18 +#define RF_WB_242 33 +#define RF_WB_242_1 34 #define RF_DECIDE_BY_INF 255 -//---------------------------------------------------------------- -// The follow define connect to upper layer -// User must modify for connection between HAL and upper layer -//---------------------------------------------------------------- - - - - -///////////////////////////////////////////////////////////////////////////////////////////////////// -//================================================================================================ -// Common define -//================================================================================================ -#define HAL_USB_MODE_BURST( _H ) (_H->SoftwareSet & 0x20 ) // Bit 5 20060901 Modify - -// Scan interval -#define SCAN_MAX_CHNL_TIME (50) - -// For TxL2 Frame typr recognise +/* + * ---------------------------------------------------------------- + * The follow define connect to upper layer + * User must modify for connection between HAL and upper layer + * ---------------------------------------------------------------- + */ + +/* + * ============================== + * Common define + * ============================== + */ +/* Bit 5 */ +#define HAL_USB_MODE_BURST(_H) (_H->SoftwareSet & 0x20) + +/* Scan interval */ +#define SCAN_MAX_CHNL_TIME (50) + +/* For TxL2 Frame typr recognise */ #define FRAME_TYPE_802_3_DATA 0 #define FRAME_TYPE_802_11_MANAGEMENT 1 -#define FRAME_TYPE_802_11_MANAGEMENT_CHALLENGE 2 +#define FRAME_TYPE_802_11_MANAGEMENT_CHALLENGE 2 #define FRAME_TYPE_802_11_CONTROL 3 #define FRAME_TYPE_802_11_DATA 4 #define FRAME_TYPE_PROMISCUOUS 5 -// The follow definition is used for convert the frame-------------------- -#define DOT_11_SEQUENCE_OFFSET 22 //Sequence control offset +/* The follow definition is used for convert the frame------------ */ +#define DOT_11_SEQUENCE_OFFSET 22 /* Sequence control offset */ #define DOT_3_TYPE_OFFSET 12 -#define DOT_11_MAC_HEADER_SIZE 24 +#define DOT_11_MAC_HEADER_SIZE 24 #define DOT_11_SNAP_SIZE 6 -#define DOT_11_TYPE_OFFSET 30 //The start offset of 802.11 Frame. Type encapsulatuin. +#define DOT_11_TYPE_OFFSET 30 /* The start offset of 802.11 Frame. Type encapsulation. */ #define DEFAULT_SIFSTIME 10 -#define DEFAULT_FRAGMENT_THRESHOLD 2346 // No fragment +#define DEFAULT_FRAGMENT_THRESHOLD 2346 /* No fragment */ #define DEFAULT_MSDU_LIFE_TIME 0xffff -#define LONG_PREAMBLE_PLUS_PLCPHEADER_TIME (144+48) -#define SHORT_PREAMBLE_PLUS_PLCPHEADER_TIME (72+24) -#define PREAMBLE_PLUS_SIGNAL_PLUS_SIGNALEXTENSION (16+4+6) -#define Tsym 4 +#define LONG_PREAMBLE_PLUS_PLCPHEADER_TIME (144 + 48) +#define SHORT_PREAMBLE_PLUS_PLCPHEADER_TIME (72 + 24) +#define PREAMBLE_PLUS_SIGNAL_PLUS_SIGNALEXTENSION (16 + 4 + 6) +#define Tsym 4 -// Frame Type of Bits (2, 3)--------------------------------------------- +/* Frame Type of Bits (2, 3)----------------------------------- */ #define MAC_TYPE_MANAGEMENT 0x00 #define MAC_TYPE_CONTROL 0x04 #define MAC_TYPE_DATA 0x08 -#define MASK_FRAGMENT_NUMBER 0x000F -#define SEQUENCE_NUMBER_SHIFT 4 +#define MASK_FRAGMENT_NUMBER 0x000F +#define SEQUENCE_NUMBER_SHIFT 4 #define HAL_WOL_TYPE_WAKEUP_FRAME 0x01 #define HAL_WOL_TYPE_MAGIC_PACKET 0x02 -// 20040106 ADDED -#define HAL_KEYTYPE_WEP40 0 -#define HAL_KEYTYPE_WEP104 1 -#define HAL_KEYTYPE_TKIP 2 // 128 bit key -#define HAL_KEYTYPE_AES_CCMP 3 // 128 bit key +#define HAL_KEYTYPE_WEP40 0 +#define HAL_KEYTYPE_WEP104 1 +#define HAL_KEYTYPE_TKIP 2 /* 128 bit key */ +#define HAL_KEYTYPE_AES_CCMP 3 /* 128 bit key */ -// For VM state +/* For VM state */ enum { VM_STOP = 0, VM_RUNNING, VM_COMPLETED }; -//----------------------------------------------------- -// Normal Key table format -//----------------------------------------------------- -// The order of KEY index is MAPPING_KEY_START_INDEX > GROUP_KEY_START_INDEX -#define MAX_KEY_TABLE 24 // 24 entry for storing key data +/* + * ================================ + * Normal Key table format + * ================================ + */ + +/* The order of KEY index is MAPPING_KEY_START_INDEX > GROUP_KEY_START_INDEX */ +#define MAX_KEY_TABLE 24 /* 24 entry for storing key data */ #define GROUP_KEY_START_INDEX 4 #define MAPPING_KEY_START_INDEX 8 -//-------------------------------------------------------- -// Descriptor -//-------------------------------------------------------- -#define MAX_DESCRIPTOR_BUFFER_INDEX 8 // Have to multiple of 2 -//#define FLAG_ERROR_TX_MASK cpu_to_le32(0x000000bf) //20061009 marked by anson's endian -#define FLAG_ERROR_TX_MASK 0x000000bf //20061009 anson's endian -//#define FLAG_ERROR_RX_MASK 0x00000c3f -//#define FLAG_ERROR_RX_MASK cpu_to_le32(0x0000083f) //20061009 marked by anson's endian - //Don't care replay error, - //it is handled by S/W -#define FLAG_ERROR_RX_MASK 0x0000083f //20060926 anson's endian - -#define FLAG_BAND_RX_MASK 0x10000000 //Bit 28 - -typedef struct _R00_DESCRIPTOR -{ - union - { +/* + * ========================================= + * Descriptor + * ========================================= + */ +#define MAX_DESCRIPTOR_BUFFER_INDEX 8 /* Have to multiple of 2 */ +#define FLAG_ERROR_TX_MASK 0x000000bf +#define FLAG_ERROR_RX_MASK 0x0000083f + +#define FLAG_BAND_RX_MASK 0x10000000 /* Bit 28 */ + +typedef struct _R00_DESCRIPTOR { + union { u32 value; - #ifdef _BIG_ENDIAN_ //20060926 anson's endian - struct - { +#ifdef _BIG_ENDIAN_ + struct { u32 R00_packet_or_buffer_status:1; u32 R00_packet_in_fifo:1; u32 R00_RESERVED:2; u32 R00_receive_byte_count:12; u32 R00_receive_time_index:16; }; - #else - struct - { +#else + struct { u32 R00_receive_time_index:16; u32 R00_receive_byte_count:12; u32 R00_RESERVED:2; u32 R00_packet_in_fifo:1; u32 R00_packet_or_buffer_status:1; }; - #endif +#endif }; } R00_DESCRIPTOR, *PR00_DESCRIPTOR; -typedef struct _T00_DESCRIPTOR -{ - union - { +typedef struct _T00_DESCRIPTOR { + union { u32 value; - #ifdef _BIG_ENDIAN_ //20061009 anson's endian - struct - { - u32 T00_first_mpdu:1; // for hardware use - u32 T00_last_mpdu:1; // for hardware use - u32 T00_IsLastMpdu:1;// 0: not 1:Yes for software used - u32 T00_IgnoreResult:1;// The same mechanism with T00 setting. 050111 Modify for TS - u32 T00_RESERVED_ID:2;//3 bit ID reserved - u32 T00_tx_packet_id:4;//930519.4.e 930810.3.c +#ifdef _BIG_ENDIAN_ + struct { + u32 T00_first_mpdu:1; /* for hardware use */ + u32 T00_last_mpdu:1; /* for hardware use */ + u32 T00_IsLastMpdu:1;/* 0:not 1:Yes for software used */ + u32 T00_IgnoreResult:1;/* The same mechanism with T00 setting. */ + u32 T00_RESERVED_ID:2;/* 3 bit ID reserved */ + u32 T00_tx_packet_id:4; u32 T00_RESERVED:4; u32 T00_header_length:6; u32 T00_frame_length:12; }; - #else - struct - { +#else + struct { u32 T00_frame_length:12; u32 T00_header_length:6; u32 T00_RESERVED:4; - u32 T00_tx_packet_id:4;//930519.4.e 930810.3.c - u32 T00_RESERVED_ID:2;//3 bit ID reserved - u32 T00_IgnoreResult:1;// The same mechanism with T00 setting. 050111 Modify for TS - u32 T00_IsLastMpdu:1;// 0: not 1:Yes for software used - u32 T00_last_mpdu:1; // for hardware use - u32 T00_first_mpdu:1; // for hardware use + u32 T00_tx_packet_id:4; + u32 T00_RESERVED_ID:2; /* 3 bit ID reserved */ + u32 T00_IgnoreResult:1; /* The same mechanism with T00 setting. */ + u32 T00_IsLastMpdu:1; /* 0:not 1:Yes for software used */ + u32 T00_last_mpdu:1; /* for hardware use */ + u32 T00_first_mpdu:1; /* for hardware use */ }; - #endif +#endif }; } T00_DESCRIPTOR, *PT00_DESCRIPTOR; -typedef struct _R01_DESCRIPTOR -{ - union - { +typedef struct _R01_DESCRIPTOR { + union { u32 value; - #ifdef _BIG_ENDIAN_ //20060926 add by anson's endian - struct - { +#ifdef _BIG_ENDIAN_ + struct { u32 R01_RESERVED:3; u32 R01_mod_type:1; u32 R01_pre_type:1; @@ -197,9 +184,8 @@ typedef struct _R01_DESCRIPTOR u32 R01_icv_error:1; u32 R01_crc_error:1; }; - #else - struct - { +#else + struct { u32 R01_crc_error:1; u32 R01_icv_error:1; u32 R01_null_key_to_authentication_frame:1; @@ -220,18 +206,15 @@ typedef struct _R01_DESCRIPTOR u32 R01_mod_type:1; u32 R01_RESERVED:3; }; - #endif +#endif }; } R01_DESCRIPTOR, *PR01_DESCRIPTOR; -typedef struct _T01_DESCRIPTOR -{ - union - { +typedef struct _T01_DESCRIPTOR { + union { u32 value; - #ifdef _BIG_ENDIAN_ //20061009 anson's endian - struct - { +#ifdef _BIG_ENDIAN_ + struct { u32 T01_rts_cts_duration:16; u32 T01_fall_back_rate:3; u32 T01_add_rts:1; @@ -245,9 +228,8 @@ typedef struct _T01_DESCRIPTOR u32 T01_loop_back_wep_mode:1; u32 T01_retry_abort_ebable:1; }; - #else - struct - { +#else + struct { u32 T01_retry_abort_ebable:1; u32 T01_loop_back_wep_mode:1; u32 T01_inhibit_crc:1; @@ -261,21 +243,18 @@ typedef struct _T01_DESCRIPTOR u32 T01_fall_back_rate:3; u32 T01_rts_cts_duration:16; }; - #endif +#endif }; } T01_DESCRIPTOR, *PT01_DESCRIPTOR; -typedef struct _T02_DESCRIPTOR -{ - union - { +typedef struct _T02_DESCRIPTOR { + union { u32 value; - #ifdef _BIG_ENDIAN_ //20061009 add by anson's endian - struct - { - u32 T02_IsLastMpdu:1;// The same mechanism with T00 setting - u32 T02_IgnoreResult:1;// The same mechanism with T00 setting. 050111 Modify for TS - u32 T02_RESERVED_ID:2;// The same mechanism with T00 setting +#ifdef _BIG_ENDIAN_ + struct { + u32 T02_IsLastMpdu:1; /* The same mechanism with T00 setting */ + u32 T02_IgnoreResult:1; /* The same mechanism with T00 setting. */ + u32 T02_RESERVED_ID:2; /* The same mechanism with T00 setting */ u32 T02_Tx_PktID:4; u32 T02_MPDU_Cnt:4; u32 T02_RTS_Cnt:4; @@ -290,9 +269,8 @@ typedef struct _T02_DESCRIPTOR u32 T02_transmit_abort:1; u32 T02_transmit_fail:1; }; - #else - struct - { +#else + struct { u32 T02_transmit_fail:1; u32 T02_transmit_abort:1; u32 T02_out_of_MaxTxMSDULiftTime:1; @@ -306,122 +284,120 @@ typedef struct _T02_DESCRIPTOR u32 T02_RTS_Cnt:4; u32 T02_MPDU_Cnt:4; u32 T02_Tx_PktID:4; - u32 T02_RESERVED_ID:2;// The same mechanism with T00 setting - u32 T02_IgnoreResult:1;// The same mechanism with T00 setting. 050111 Modify for TS - u32 T02_IsLastMpdu:1;// The same mechanism with T00 setting + u32 T02_RESERVED_ID:2; /* The same mechanism with T00 setting */ + u32 T02_IgnoreResult:1; /* The same mechanism with T00 setting. */ + u32 T02_IsLastMpdu:1; /* The same mechanism with T00 setting */ }; - #endif +#endif }; } T02_DESCRIPTOR, *PT02_DESCRIPTOR; -struct wb35_descriptor { // Skip length = 8 DWORD - // ID for descriptor ---, The field doesn't be cleard in the operation of Descriptor definition +struct wb35_descriptor { /* Skip length = 8 DWORD */ + /* ID for descriptor ---, The field doesn't be cleard in the operation of Descriptor definition */ u8 Descriptor_ID; - //----------------------The above region doesn't be cleared by DESCRIPTOR_RESET------ + /* ----------------------The above region doesn't be cleared by DESCRIPTOR_RESET------ */ u8 RESERVED[3]; u16 FragmentThreshold; - u8 InternalUsed;//Only can be used by operation of descriptor definition - u8 Type;// 0: 802.3 1:802.11 data frame 2:802.11 management frame + u8 InternalUsed; /* Only can be used by operation of descriptor definition */ + u8 Type; /* 0: 802.3 1:802.11 data frame 2:802.11 management frame */ - u8 PreambleMode;// 0: short 1:long + u8 PreambleMode;/* 0: short 1:long */ u8 TxRate; u8 FragmentCount; - u8 EapFix; // For speed up key install + u8 EapFix; /* For speed up key install */ - // For R00 and T00 ---------------------------------------------- - union - { + /* For R00 and T00 ------------------------------ */ + union { R00_DESCRIPTOR R00; T00_DESCRIPTOR T00; }; - // For R01 and T01 ---------------------------------------------- - union - { + /* For R01 and T01 ------------------------------ */ + union { R01_DESCRIPTOR R01; T01_DESCRIPTOR T01; }; - // For R02 and T02 ---------------------------------------------- - union - { - u32 R02; + /* For R02 and T02 ------------------------------ */ + union { + u32 R02; T02_DESCRIPTOR T02; }; - // For R03 and T03 ---------------------------------------------- - // For software used - union - { + /* For R03 and T03 ------------------------------ */ + /* For software used */ + union { u32 R03; u32 T03; - struct - { + struct { u8 buffer_number; u8 buffer_start_index; u16 buffer_total_size; }; }; - // For storing the buffer - u16 buffer_size[ MAX_DESCRIPTOR_BUFFER_INDEX ]; - void* buffer_address[ MAX_DESCRIPTOR_BUFFER_INDEX ];//931130.4.q - + /* For storing the buffer */ + u16 buffer_size[MAX_DESCRIPTOR_BUFFER_INDEX]; + void *buffer_address[MAX_DESCRIPTOR_BUFFER_INDEX]; }; -#define DEFAULT_NULL_PACKET_COUNT 180000 //20060828.1 Add. 180 seconds +#define DEFAULT_NULL_PACKET_COUNT 180000 /* 180 seconds */ -#define MAX_TXVGA_EEPROM 9 //How many word(u16) of EEPROM will be used for TxVGA -#define MAX_RF_PARAMETER 32 +#define MAX_TXVGA_EEPROM 9 /* How many word(u16) of EEPROM will be used for TxVGA */ +#define MAX_RF_PARAMETER 32 typedef struct _TXVGA_FOR_50 { - u8 ChanNo; - u8 TxVgaValue; + u8 ChanNo; + u8 TxVgaValue; } TXVGA_FOR_50; -//===================================================================== -// Device related include -//===================================================================== +/* + * ============================================== + * Device related include + * ============================================== + */ #include "wbusb_s.h" #include "wb35reg_s.h" #include "wb35tx_s.h" #include "wb35rx_s.h" -// For Hal using ================================================================== +/* For Hal using ============================================ */ struct hw_data { - // For compatible with 33 + /* For compatible with 33 */ u32 revision; - u32 BB3c_cal; // The value for Tx calibration comes from EEPROM - u32 BB54_cal; // The value for Rx calibration comes from EEPROM + u32 BB3c_cal; /* The value for Tx calibration comes from EEPROM */ + u32 BB54_cal; /* The value for Rx calibration comes from EEPROM */ - - // For surprise remove - u32 SurpriseRemove; // 0: Normal 1: Surprise remove + /* For surprise remove */ + u32 SurpriseRemove; /* 0: Normal 1: Surprise remove */ u8 IsKeyPreSet; - u8 CalOneTime; // 20060630.1 + u8 CalOneTime; u8 VCO_trim; - // For Fix 1'st DMA bug u32 FragCount; - u32 DMAFix; //V1_DMA_FIX The variable can be removed if driver want to save mem space for V2. - - //=============================================== - // Definition for MAC address - //=============================================== - u8 PermanentMacAddress[ETH_ALEN + 2]; // The Enthernet addr that are stored in EEPROM. + 2 to 8-byte alignment - u8 CurrentMacAddress[ETH_ALEN + 2]; // The Enthernet addr that are in used. + 2 to 8-byte alignment - - //===================================================================== - // Definition for 802.11 - //===================================================================== - u8 *bssid_pointer; // Used by hal_get_bssid for return value - u8 bssid[8];// Only 6 byte will be used. 8 byte is required for read buffer - u8 ssid[32];// maximum ssid length is 32 byte + u32 DMAFix; /* V1_DMA_FIX The variable can be removed if driver want to save mem space for V2. */ + + /* + * =============================================== + * Definition for MAC address + * =============================================== + */ + u8 PermanentMacAddress[ETH_ALEN + 2]; /* The Ethernet addr that are stored in EEPROM. + 2 to 8-byte alignment */ + u8 CurrentMacAddress[ETH_ALEN + 2]; /* The Enthernet addr that are in used. + 2 to 8-byte alignment */ + + /* + * ========================================= + * Definition for 802.11 + * ========================================= + */ + u8 *bssid_pointer; /* Used by hal_get_bssid for return value */ + u8 bssid[8]; /* Only 6 byte will be used. 8 byte is required for read buffer */ + u8 ssid[32]; /* maximum ssid length is 32 byte */ u16 AID; u8 ssid_length; @@ -433,112 +409,118 @@ struct hw_data { u16 BeaconPeriod; u16 ProbeDelay; - u8 bss_type;// 0: IBSS_NET or 1:ESS_NET - u8 preamble;// 0: short preamble, 1: long preamble - u8 slot_time_select;// 9 or 20 value - u8 phy_type;// Phy select + u8 bss_type;/* 0: IBSS_NET or 1:ESS_NET */ + u8 preamble;/* 0: short preamble, 1: long preamble */ + u8 slot_time_select; /* 9 or 20 value */ + u8 phy_type; /* Phy select */ u32 phy_para[MAX_RF_PARAMETER]; u32 phy_number; - u32 CurrentRadioSw; // 20060320.2 0:On 1:Off - u32 CurrentRadioHw; // 20060825 0:On 1:Off + u32 CurrentRadioSw; /* 0:On 1:Off */ + u32 CurrentRadioHw; /* 0:On 1:Off */ - u8 *power_save_point; // Used by hal_get_power_save_mode for return value + u8 *power_save_point; /* Used by hal_get_power_save_mode for return value */ u8 cwmin; u8 desired_power_save; - u8 dtim;// Is running dtim - u8 mapping_key_replace_index;//In Key table, the next index be replaced 931130.4.r + u8 dtim; /* Is running dtim */ + u8 mapping_key_replace_index; /* In Key table, the next index be replaced */ u16 MaxReceiveLifeTime; u16 FragmentThreshold; u16 FragmentThreshold_tmp; u16 cwmax; - u8 Key_slot[MAX_KEY_TABLE][8]; //Ownership record for key slot. For Alignment - u32 Key_content[MAX_KEY_TABLE][12]; // 10DW for each entry + 2 for burst command( Off and On valid bit) + u8 Key_slot[MAX_KEY_TABLE][8]; /* Ownership record for key slot. For Alignment */ + u32 Key_content[MAX_KEY_TABLE][12]; /* 10DW for each entry + 2 for burst command (Off and On valid bit) */ u8 CurrentDefaultKeyIndex; u32 CurrentDefaultKeyLength; - //======================================================================== - // Variable for each module - //======================================================================== - struct wb_usb WbUsb; // Need WbUsb.h - struct wb35_reg reg; // Need Wb35Reg.h - struct wb35_tx Wb35Tx; // Need Wb35Tx.h - struct wb35_rx Wb35Rx; // Need Wb35Rx.h + /* + * ================================================== + * Variable for each module + * ================================================== + */ + struct wb_usb WbUsb; /* Need WbUsb.h */ + struct wb35_reg reg; /* Need Wb35Reg.h */ + struct wb35_tx Wb35Tx; /* Need Wb35Tx.h */ + struct wb35_rx Wb35Rx; /* Need Wb35Rx.h */ - struct timer_list LEDTimer;// For LED + struct timer_list LEDTimer; /* For LED */ - u32 LEDpoint;// For LED + u32 LEDpoint; /* For LED */ - u32 dto_tx_retry_count; // LA20040210_DTO kevin - u32 dto_tx_frag_count; // LA20040210_DTO kevin - u32 rx_ok_count[13]; // index=0: total rx ok - //u32 rx_ok_bytes[13]; // index=0, total rx ok bytes - u32 rx_err_count[13]; // index=0: total rx err + u32 dto_tx_retry_count; + u32 dto_tx_frag_count; + u32 rx_ok_count[13]; /* index=0: total rx ok */ + u32 rx_err_count[13]; /* index=0: total rx err */ - //for Tx debug + /* for Tx debug */ u32 tx_TBTT_start_count; u32 tx_ETR_count; u32 tx_WepOn_false_count; u32 tx_Null_key_count; u32 tx_retry_count[8]; - u8 PowerIndexFromEEPROM; // For 2412MHz - u8 power_index; - u8 IsWaitJoinComplete; // TRUE: set join request - u8 band; + u8 PowerIndexFromEEPROM; /* For 2412MHz */ + u8 power_index; + u8 IsWaitJoinComplete; /* TRUE: set join request */ + u8 band; - u16 SoftwareSet; - u16 Reserved_s; + u16 SoftwareSet; + u16 Reserved_s; - u32 IsInitOK; // 0: Driver starting 1: Driver init OK + u32 IsInitOK; /* 0: Driver starting 1: Driver init OK */ - // For Phy calibration - s32 iq_rsdl_gain_tx_d2; - s32 iq_rsdl_phase_tx_d2; - u32 txvga_setting_for_cal; // 20060703.1 Add + /* For Phy calibration */ + s32 iq_rsdl_gain_tx_d2; + s32 iq_rsdl_phase_tx_d2; + u32 txvga_setting_for_cal; - u8 TxVgaSettingInEEPROM[ (((MAX_TXVGA_EEPROM*2)+3) & ~0x03) ]; // 20060621 For backup EEPROM value - u8 TxVgaFor24[16]; // Max is 14, 2 for alignment - TXVGA_FOR_50 TxVgaFor50[36]; // 35 channels in 5G. 35x2 = 70 byte. 2 for alignments + u8 TxVgaSettingInEEPROM[(((MAX_TXVGA_EEPROM * 2) + 3) & ~0x03)]; /* For EEPROM value */ + u8 TxVgaFor24[16]; /* Max is 14, 2 for alignment */ + TXVGA_FOR_50 TxVgaFor50[36]; /* 35 channels in 5G. 35x2 = 70 byte. 2 for alignments */ - u16 Scan_Interval; - u16 RESERVED6; + u16 Scan_Interval; + u16 RESERVED6; - // LED control + /* LED control */ u32 LED_control; - // LED_control 4 byte: Gray_Led_1[3] Gray_Led_0[2] Led[1] Led[0] - // Gray_Led - // For Led gray setting - // Led - // 0: normal control, LED behavior will decide by EEPROM setting - // 1: Turn off specific LED - // 2: Always on specific LED - // 3: slow blinking specific LED - // 4: fast blinking specific LED - // 5: WPS led control is set. Led0 is Red, Led1 id Green - // Led[1] is parameter for WPS LED mode - // // 1:InProgress 2: Error 3: Session overlap 4: Success 20061108 control - - u32 LED_LinkOn; //Turn LED on control - u32 LED_Scanning; // Let LED in scan process control - u32 LED_Blinking; // Temp variable for shining + /* + * LED_control 4 byte: Gray_Led_1[3] Gray_Led_0[2] Led[1] Led[0] + * Gray_Led + * For Led gray setting + * Led + * 0: normal control, + * LED behavior will decide by EEPROM setting + * 1: Turn off specific LED + * 2: Always on specific LED + * 3: slow blinking specific LED + * 4: fast blinking specific LED + * 5: WPS led control is set. Led0 is Red, Led1 id Green + * + * Led[1] is parameter for WPS LED mode + * 1:InProgress + * 2: Error + * 3: Session overlap + * 4: Success control + */ + u32 LED_LinkOn; /* Turn LED on control */ + u32 LED_Scanning; /* Let LED in scan process control */ + u32 LED_Blinking; /* Temp variable for shining */ u32 RxByteCountLast; u32 TxByteCountLast; atomic_t SurpriseRemoveCount; - // For global timer - u32 time_count;//TICK_TIME_100ms 1 = 100ms + /* For global timer */ + u32 time_count; /* TICK_TIME_100ms 1 = 100ms */ - // For error recover + /* For error recover */ u32 HwStop; - // 20060828.1 for avoid AP disconnect + /* For avoid AP disconnect */ u32 NullPacketCount; - }; #endif -- cgit v1.2.3-59-g8ed1b