From e41a6f6d9cb7404420d596f27609a3f4f55dcaf5 Mon Sep 17 00:00:00 2001 From: Stewart Robertson Date: Sun, 21 Feb 2010 10:13:21 +0000 Subject: Staging: comedi: fix coding style issues in ni_labpc.c This is a patch to the ni_labpc.c file that fixes the brace warnings and comments over 80 characters found by the checkpatch.pl tool. Some code still goes over 80 characters because I didn't know what to do with it. Signed-off-by: Stewart Robertson Signed-off-by: Greg Kroah-Hartman --- drivers/staging/comedi/drivers/ni_labpc.c | 231 +++++++++++++++++++----------- 1 file changed, 145 insertions(+), 86 deletions(-) (limited to 'drivers/staging') diff --git a/drivers/staging/comedi/drivers/ni_labpc.c b/drivers/staging/comedi/drivers/ni_labpc.c index 566b791e00c7..bc5662e2a9bf 100644 --- a/drivers/staging/comedi/drivers/ni_labpc.c +++ b/drivers/staging/comedi/drivers/ni_labpc.c @@ -90,8 +90,10 @@ NI manuals: #define DRV_NAME "ni_labpc" -#define LABPC_SIZE 32 /* size of io region used by board */ -#define LABPC_TIMER_BASE 500 /* 2 MHz master clock */ +/* size of io region used by board */ +#define LABPC_SIZE 32 +/* 2 MHz master clock */ +#define LABPC_TIMER_BASE 500 /* Registers for the lab-pc+ */ @@ -99,69 +101,110 @@ NI manuals: #define COMMAND1_REG 0x0 #define ADC_GAIN_MASK (0x7 << 4) #define ADC_CHAN_BITS(x) ((x) & 0x7) -#define ADC_SCAN_EN_BIT 0x80 /* enables multi channel scans */ +/* enables multi channel scans */ +#define ADC_SCAN_EN_BIT 0x80 #define COMMAND2_REG 0x1 -#define PRETRIG_BIT 0x1 /* enable pretriggering (used in conjunction with SWTRIG) */ -#define HWTRIG_BIT 0x2 /* enable paced conversions on external trigger */ -#define SWTRIG_BIT 0x4 /* enable paced conversions */ -#define CASCADE_BIT 0x8 /* use two cascaded counters for pacing */ +/* enable pretriggering (used in conjunction with SWTRIG) */ +#define PRETRIG_BIT 0x1 +/* enable paced conversions on external trigger */ +#define HWTRIG_BIT 0x2 +/* enable paced conversions */ +#define SWTRIG_BIT 0x4 +/* use two cascaded counters for pacing */ +#define CASCADE_BIT 0x8 #define DAC_PACED_BIT(channel) (0x40 << ((channel) & 0x1)) #define COMMAND3_REG 0x2 -#define DMA_EN_BIT 0x1 /* enable dma transfers */ -#define DIO_INTR_EN_BIT 0x2 /* enable interrupts for 8255 */ -#define DMATC_INTR_EN_BIT 0x4 /* enable dma terminal count interrupt */ -#define TIMER_INTR_EN_BIT 0x8 /* enable timer interrupt */ -#define ERR_INTR_EN_BIT 0x10 /* enable error interrupt */ -#define ADC_FNE_INTR_EN_BIT 0x20 /* enable fifo not empty interrupt */ +/* enable dma transfers */ +#define DMA_EN_BIT 0x1 +/* enable interrupts for 8255 */ +#define DIO_INTR_EN_BIT 0x2 +/* enable dma terminal count interrupt */ +#define DMATC_INTR_EN_BIT 0x4 +/* enable timer interrupt */ +#define TIMER_INTR_EN_BIT 0x8 +/* enable error interrupt */ +#define ERR_INTR_EN_BIT 0x10 +/* enable fifo not empty interrupt */ +#define ADC_FNE_INTR_EN_BIT 0x20 #define ADC_CONVERT_REG 0x3 #define DAC_LSB_REG(channel) (0x4 + 2 * ((channel) & 0x1)) #define DAC_MSB_REG(channel) (0x5 + 2 * ((channel) & 0x1)) #define ADC_CLEAR_REG 0x8 #define DMATC_CLEAR_REG 0xa #define TIMER_CLEAR_REG 0xc -#define COMMAND6_REG 0xe /* 1200 boards only */ -#define ADC_COMMON_BIT 0x1 /* select ground or common-mode reference */ -#define ADC_UNIP_BIT 0x2 /* adc unipolar */ -#define DAC_UNIP_BIT(channel) (0x4 << ((channel) & 0x1)) /* dac unipolar */ -#define ADC_FHF_INTR_EN_BIT 0x20 /* enable fifo half full interrupt */ -#define A1_INTR_EN_BIT 0x40 /* enable interrupt on end of hardware count */ -#define ADC_SCAN_UP_BIT 0x80 /* scan up from channel zero instead of down to zero */ +/* 1200 boards only */ +#define COMMAND6_REG 0xe +/* select ground or common-mode reference */ +#define ADC_COMMON_BIT 0x1 +/* adc unipolar */ +#define ADC_UNIP_BIT 0x2 +/* dac unipolar */ +#define DAC_UNIP_BIT(channel) (0x4 << ((channel) & 0x1)) +/* enable fifo half full interrupt */ +#define ADC_FHF_INTR_EN_BIT 0x20 +/* enable interrupt on end of hardware count */ +#define A1_INTR_EN_BIT 0x40 +/* scan up from channel zero instead of down to zero */ +#define ADC_SCAN_UP_BIT 0x80 #define COMMAND4_REG 0xf -#define INTERVAL_SCAN_EN_BIT 0x1 /* enables 'interval' scanning */ -#define EXT_SCAN_EN_BIT 0x2 /* enables external signal on counter b1 output to trigger scan */ -#define EXT_CONVERT_OUT_BIT 0x4 /* chooses direction (output or input) for EXTCONV* line */ -#define ADC_DIFF_BIT 0x8 /* chooses differential inputs for adc (in conjunction with board jumper) */ +/* enables 'interval' scanning */ +#define INTERVAL_SCAN_EN_BIT 0x1 +/* enables external signal on counter b1 output to trigger scan */ +#define EXT_SCAN_EN_BIT 0x2 +/* chooses direction (output or input) for EXTCONV* line */ +#define EXT_CONVERT_OUT_BIT 0x4 +/* chooses differential inputs for adc (in conjunction with board jumper) */ +#define ADC_DIFF_BIT 0x8 #define EXT_CONVERT_DISABLE_BIT 0x10 -#define COMMAND5_REG 0x1c /* 1200 boards only, calibration stuff */ -#define EEPROM_WRITE_UNPROTECT_BIT 0x4 /* enable eeprom for write */ -#define DITHER_EN_BIT 0x8 /* enable dithering */ -#define CALDAC_LOAD_BIT 0x10 /* load calibration dac */ -#define SCLOCK_BIT 0x20 /* serial clock - rising edge writes, falling edge reads */ -#define SDATA_BIT 0x40 /* serial data bit for writing to eeprom or calibration dacs */ -#define EEPROM_EN_BIT 0x80 /* enable eeprom for read/write */ +/* 1200 boards only, calibration stuff */ +#define COMMAND5_REG 0x1c +/* enable eeprom for write */ +#define EEPROM_WRITE_UNPROTECT_BIT 0x4 +/* enable dithering */ +#define DITHER_EN_BIT 0x8 +/* load calibration dac */ +#define CALDAC_LOAD_BIT 0x10 +/* serial clock - rising edge writes, falling edge reads */ +#define SCLOCK_BIT 0x20 +/* serial data bit for writing to eeprom or calibration dacs */ +#define SDATA_BIT 0x40 +/* enable eeprom for read/write */ +#define EEPROM_EN_BIT 0x80 #define INTERVAL_COUNT_REG 0x1e #define INTERVAL_LOAD_REG 0x1f #define INTERVAL_LOAD_BITS 0x1 /* read-only registers */ #define STATUS1_REG 0x0 -#define DATA_AVAIL_BIT 0x1 /* data is available in fifo */ -#define OVERRUN_BIT 0x2 /* overrun has occurred */ -#define OVERFLOW_BIT 0x4 /* fifo overflow */ -#define TIMER_BIT 0x8 /* timer interrupt has occured */ -#define DMATC_BIT 0x10 /* dma terminal count has occured */ -#define EXT_TRIG_BIT 0x40 /* external trigger has occured */ -#define STATUS2_REG 0x1d /* 1200 boards only */ -#define EEPROM_OUT_BIT 0x1 /* programmable eeprom serial output */ -#define A1_TC_BIT 0x2 /* counter A1 terminal count */ -#define FNHF_BIT 0x4 /* fifo not half full */ +/* data is available in fifo */ +#define DATA_AVAIL_BIT 0x1 +/* overrun has occurred */ +#define OVERRUN_BIT 0x2 +/* fifo overflow */ +#define OVERFLOW_BIT 0x4 +/* timer interrupt has occured */ +#define TIMER_BIT 0x8 +/* dma terminal count has occured */ +#define DMATC_BIT 0x10 +/* external trigger has occured */ +#define EXT_TRIG_BIT 0x40 +/* 1200 boards only */ +#define STATUS2_REG 0x1d +/* programmable eeprom serial output */ +#define EEPROM_OUT_BIT 0x1 +/* counter A1 terminal count */ +#define A1_TC_BIT 0x2 +/* fifo not half full */ +#define FNHF_BIT 0x4 #define ADC_FIFO_REG 0xa #define DIO_BASE_REG 0x10 #define COUNTER_A_BASE_REG 0x14 #define COUNTER_A_CONTROL_REG (COUNTER_A_BASE_REG + 0x3) -#define INIT_A0_BITS 0x14 /* check modes put conversion pacer output in harmless state (a0 mode 2) */ -#define INIT_A1_BITS 0x70 /* put hardware conversion counter output in harmless state (a1 mode 0) */ +/* check modes put conversion pacer output in harmless state (a0 mode 2) */ +#define INIT_A0_BITS 0x14 +/* put hardware conversion counter output in harmless state (a1 mode 0) */ +#define INIT_A1_BITS 0x70 #define COUNTER_B_BASE_REG 0x18 static int labpc_attach(struct comedi_device *dev, struct comedi_devconfig *it); @@ -423,7 +466,7 @@ static const struct labpc_board_struct labpc_boards[] = { .ai_scan_up = 1, .memory_mapped_io = 1, }, - /* dummy entry so pci board works when comedi_config is passed driver name */ +/* dummy entry so pci board works when comedi_config is passed driver name */ { .name = DRV_NAME, .bustype = pci_bustype, @@ -436,8 +479,10 @@ static const struct labpc_board_struct labpc_boards[] = { */ #define thisboard ((struct labpc_board_struct *)dev->board_ptr) -static const int dma_buffer_size = 0xff00; /* size in bytes of dma buffer */ -static const int sample_size = 2; /* 2 bytes per sample */ +/* size in bytes of dma buffer */ +static const int dma_buffer_size = 0xff00; +/* 2 bytes per sample */ +static const int sample_size = 2; #define devpriv ((struct labpc_private *)dev->private) @@ -511,7 +556,7 @@ int labpc_common_attach(struct comedi_device *dev, unsigned long iobase, devpriv->read_byte = labpc_inb; devpriv->write_byte = labpc_outb; } - /* initialize board's command registers */ + /* initialize board's command registers */ devpriv->write_byte(devpriv->command1_bits, dev->iobase + COMMAND1_REG); devpriv->write_byte(devpriv->command2_bits, dev->iobase + COMMAND2_REG); devpriv->write_byte(devpriv->command3_bits, dev->iobase + COMMAND3_REG); @@ -536,12 +581,12 @@ int labpc_common_attach(struct comedi_device *dev, unsigned long iobase, } dev->irq = irq; - /* grab dma channel */ + /* grab dma channel */ if (dma_chan > 3) { printk(" invalid dma channel %u\n", dma_chan); return -EINVAL; } else if (dma_chan) { - /* allocate dma buffer */ + /* allocate dma buffer */ devpriv->dma_buffer = kmalloc(dma_buffer_size, GFP_KERNEL | GFP_DMA); if (devpriv->dma_buffer == NULL) { @@ -573,7 +618,7 @@ int labpc_common_attach(struct comedi_device *dev, unsigned long iobase, SDF_READABLE | SDF_GROUND | SDF_COMMON | SDF_DIFF | SDF_CMD_READ; s->n_chan = 8; s->len_chanlist = 8; - s->maxdata = (1 << 12) - 1; /* 12 bit resolution */ + s->maxdata = (1 << 12) - 1; /* 12 bit resolution */ s->range_table = thisboard->ai_range_table; s->do_cmd = labpc_ai_cmd; s->do_cmdtest = labpc_ai_cmdtest; @@ -667,7 +712,7 @@ static int labpc_attach(struct comedi_device *dev, struct comedi_devconfig *it) if (alloc_private(dev, sizeof(struct labpc_private)) < 0) return -ENOMEM; - /* get base address, irq etc. based on bustype */ + /* get base address, irq etc. based on bustype */ switch (thisboard->bustype) { case isa_bustype: iobase = it->options[0]; @@ -712,7 +757,7 @@ static int labpc_find_device(struct comedi_device *dev, int bus, int slot) for (mite = mite_devices; mite; mite = mite->next) { if (mite->used) continue; - /* if bus/slot are specified then make sure we have the right bus/slot */ +/* if bus/slot are specified then make sure we have the right bus/slot */ if (bus || slot) { if (bus != mite->pcidev->bus->number || slot != PCI_SLOT(mite->pcidev->devfn)) @@ -723,7 +768,7 @@ static int labpc_find_device(struct comedi_device *dev, int bus, int slot) continue; if (mite_device_id(mite) == labpc_boards[i].device_id) { devpriv->mite = mite; - /* fixup board pointer, in case we were using the dummy "ni_labpc" entry */ +/* fixup board pointer, in case we were using the dummy "ni_labpc" entry */ dev->board_ptr = &labpc_boards[i]; return 0; } @@ -991,7 +1036,7 @@ static int labpc_ai_cmdtest(struct comedi_device *dev, cmd->stop_src != TRIG_EXT && cmd->stop_src != TRIG_NONE) err++; - /* can't have external stop and start triggers at once */ + /* can't have external stop and start triggers at once */ if (cmd->start_src == TRIG_EXT && cmd->stop_src == TRIG_EXT) err++; @@ -1019,7 +1064,7 @@ static int labpc_ai_cmdtest(struct comedi_device *dev, err++; } } - /* make sure scan timing is not too fast */ + /* make sure scan timing is not too fast */ if (cmd->scan_begin_src == TRIG_TIMER) { if (cmd->convert_src == TRIG_TIMER && cmd->scan_begin_arg < @@ -1035,7 +1080,7 @@ static int labpc_ai_cmdtest(struct comedi_device *dev, err++; } } - /* stop source */ + /* stop source */ switch (cmd->stop_src) { case TRIG_COUNT: if (!cmd->stop_arg) { @@ -1092,7 +1137,7 @@ static int labpc_ai_cmd(struct comedi_device *dev, struct comedi_subdevice *s) range = CR_RANGE(cmd->chanlist[0]); aref = CR_AREF(cmd->chanlist[0]); - /* make sure board is disabled before setting up aquisition */ + /* make sure board is disabled before setting up aquisition */ spin_lock_irqsave(&dev->spinlock, flags); devpriv->command2_bits &= ~SWTRIG_BIT & ~HWTRIG_BIT & ~PRETRIG_BIT; devpriv->write_byte(devpriv->command2_bits, dev->iobase + COMMAND2_REG); @@ -1172,17 +1217,18 @@ static int labpc_ai_cmd(struct comedi_device *dev, struct comedi_subdevice *s) channel = CR_CHAN(cmd->chanlist[cmd->chanlist_len - 1]); else channel = CR_CHAN(cmd->chanlist[0]); - /* munge channel bits for differential / scan disabled mode */ + /* munge channel bits for differential / scan disabled mode */ if (labpc_ai_scan_mode(cmd) != MODE_SINGLE_CHAN && aref == AREF_DIFF) channel *= 2; devpriv->command1_bits |= ADC_CHAN_BITS(channel); devpriv->command1_bits |= thisboard->ai_range_code[range]; devpriv->write_byte(devpriv->command1_bits, dev->iobase + COMMAND1_REG); - /* manual says to set scan enable bit on second pass */ + /* manual says to set scan enable bit on second pass */ if (labpc_ai_scan_mode(cmd) == MODE_MULT_CHAN_UP || labpc_ai_scan_mode(cmd) == MODE_MULT_CHAN_DOWN) { devpriv->command1_bits |= ADC_SCAN_EN_BIT; - /* need a brief delay before enabling scan, or scan list will get screwed when you switch + /* need a brief delay before enabling scan, or scan + * list will get screwed when you switch * between scan up to scan down mode - dunno why */ udelay(1); devpriv->write_byte(devpriv->command1_bits, @@ -1334,7 +1380,7 @@ static irqreturn_t labpc_interrupt(int irq, void *d) cmd = &async->cmd; async->events = 0; - /* read board status */ + /* read board status */ devpriv->status1_bits = devpriv->read_byte(dev->iobase + STATUS1_REG); if (thisboard->register_layout == labpc_1200_layout) devpriv->status2_bits = @@ -1348,7 +1394,7 @@ static irqreturn_t labpc_interrupt(int irq, void *d) } if (devpriv->status1_bits & OVERRUN_BIT) { - /* clear error interrupt */ + /* clear error interrupt */ devpriv->write_byte(0x1, dev->iobase + ADC_CLEAR_REG); async->events |= COMEDI_CB_ERROR | COMEDI_CB_EOA; comedi_event(dev, s); @@ -1357,7 +1403,7 @@ static irqreturn_t labpc_interrupt(int irq, void *d) } if (devpriv->current_transfer == isa_dma_transfer) { - /* if a dma terminal count of external stop trigger has occurred */ + /* if a dma terminal count of external stop trigger has occurred */ if (devpriv->status1_bits & DMATC_BIT || (thisboard->register_layout == labpc_1200_layout && devpriv->status2_bits & A1_TC_BIT)) { @@ -1532,41 +1578,41 @@ static int labpc_ai_rinsn(struct comedi_device *dev, struct comedi_subdevice *s, chan = CR_CHAN(insn->chanspec); range = CR_RANGE(insn->chanspec); devpriv->command1_bits |= thisboard->ai_range_code[range]; - /* munge channel bits for differential/scan disabled mode */ + /* munge channel bits for differential/scan disabled mode */ if (CR_AREF(insn->chanspec) == AREF_DIFF) chan *= 2; devpriv->command1_bits |= ADC_CHAN_BITS(chan); devpriv->write_byte(devpriv->command1_bits, dev->iobase + COMMAND1_REG); - /* setup command6 register for 1200 boards */ + /* setup command6 register for 1200 boards */ if (thisboard->register_layout == labpc_1200_layout) { /* reference inputs to ground or common? */ if (CR_AREF(insn->chanspec) != AREF_GROUND) devpriv->command6_bits |= ADC_COMMON_BIT; else devpriv->command6_bits &= ~ADC_COMMON_BIT; - /* bipolar or unipolar range? */ + /* bipolar or unipolar range? */ if (thisboard->ai_range_is_unipolar[range]) devpriv->command6_bits |= ADC_UNIP_BIT; else devpriv->command6_bits &= ~ADC_UNIP_BIT; - /* don't interrupt on fifo half full */ + /* don't interrupt on fifo half full */ devpriv->command6_bits &= ~ADC_FHF_INTR_EN_BIT; - /* don't enable interrupt on counter a1 terminal count? */ + /* don't enable interrupt on counter a1 terminal count? */ devpriv->command6_bits &= ~A1_INTR_EN_BIT; - /* write to register */ + /* write to register */ devpriv->write_byte(devpriv->command6_bits, dev->iobase + COMMAND6_REG); } - /* setup command4 register */ + /* setup command4 register */ devpriv->command4_bits = 0; devpriv->command4_bits |= EXT_CONVERT_DISABLE_BIT; - /* single-ended/differential */ + /* single-ended/differential */ if (CR_AREF(insn->chanspec) == AREF_DIFF) devpriv->command4_bits |= ADC_DIFF_BIT; devpriv->write_byte(devpriv->command4_bits, dev->iobase + COMMAND4_REG); - /* initialize pacer counter output to make sure it doesn't cause any problems */ + /* initialize pacer counter output to make sure it doesn't cause any problems */ devpriv->write_byte(INIT_A0_BITS, dev->iobase + COUNTER_A_CONTROL_REG); labpc_clear_adc_fifo(dev); @@ -1603,7 +1649,7 @@ static int labpc_ao_winsn(struct comedi_device *dev, struct comedi_subdevice *s, channel = CR_CHAN(insn->chanspec); - /* turn off pacing of analog output channel */ + /* turn off pacing of analog output channel */ /* note: hardware bug in daqcard-1200 means pacing cannot * be independently enabled/disabled for its the two channels */ spin_lock_irqsave(&dev->spinlock, flags); @@ -1611,7 +1657,7 @@ static int labpc_ao_winsn(struct comedi_device *dev, struct comedi_subdevice *s, devpriv->write_byte(devpriv->command2_bits, dev->iobase + COMMAND2_REG); spin_unlock_irqrestore(&dev->spinlock, flags); - /* set range */ + /* set range */ if (thisboard->register_layout == labpc_1200_layout) { range = CR_RANGE(insn->chanspec); if (range & AO_RANGE_IS_UNIPOLAR) @@ -1622,13 +1668,13 @@ static int labpc_ao_winsn(struct comedi_device *dev, struct comedi_subdevice *s, devpriv->write_byte(devpriv->command6_bits, dev->iobase + COMMAND6_REG); } - /* send data */ + /* send data */ lsb = data[0] & 0xff; msb = (data[0] >> 8) & 0xff; devpriv->write_byte(lsb, dev->iobase + DAC_LSB_REG(channel)); devpriv->write_byte(msb, dev->iobase + DAC_MSB_REG(channel)); - /* remember value for readback */ + /* remember value for readback */ devpriv->ao_value[channel] = data[0]; return 1; @@ -1700,14 +1746,14 @@ static unsigned int labpc_suggest_transfer_size(struct comedi_cmd cmd) if (cmd.convert_src == TRIG_TIMER) freq = 1000000000 / cmd.convert_arg; - /* return some default value */ + /* return some default value */ else freq = 0xffffffff; - /* make buffer fill in no more than 1/3 second */ + /* make buffer fill in no more than 1/3 second */ size = (freq / 3) * sample_size; - /* set a minimum and maximum size allowed */ + /* set a minimum and maximum size allowed */ if (size > dma_buffer_size) size = dma_buffer_size - dma_buffer_size % sample_size; else if (size < sample_size) @@ -1719,13 +1765,21 @@ static unsigned int labpc_suggest_transfer_size(struct comedi_cmd cmd) /* figures out what counter values to use based on command */ static void labpc_adc_timing(struct comedi_device *dev, struct comedi_cmd *cmd) { - const int max_counter_value = 0x10000; /* max value for 16 bit counter in mode 2 */ - const int min_counter_value = 2; /* min value for 16 bit counter in mode 2 */ + /* max value for 16 bit counter in mode 2 */ + const int max_counter_value = 0x10000; + /* min value for 16 bit counter in mode 2 */ + const int min_counter_value = 2; unsigned int base_period; - /* if both convert and scan triggers are TRIG_TIMER, then they both rely on counter b0 */ + /* + * if both convert and scan triggers are TRIG_TIMER, then they + * both rely on counter b0 + */ if (labpc_ai_convert_period(cmd) && labpc_ai_scan_period(cmd)) { - /* pick the lowest b0 divisor value we can (for maximum input clock speed on convert and scan counters) */ + /* + * pick the lowest b0 divisor value we can (for maximum input + * clock speed on convert and scan counters) + */ devpriv->divisor_b0 = (labpc_ai_scan_period(cmd) - 1) / (LABPC_TIMER_BASE * max_counter_value) + 1; if (devpriv->divisor_b0 < min_counter_value) @@ -1775,7 +1829,10 @@ static void labpc_adc_timing(struct comedi_device *dev, struct comedi_cmd *cmd) base_period * devpriv->divisor_a0); labpc_set_ai_scan_period(cmd, base_period * devpriv->divisor_b1); - /* if only one TRIG_TIMER is used, we can employ the generic cascaded timing functions */ + /* + * if only one TRIG_TIMER is used, we can employ the generic + * cascaded timing functions + */ } else if (labpc_ai_scan_period(cmd)) { unsigned int scan_period; @@ -1870,8 +1927,10 @@ static unsigned int labpc_eeprom_read(struct comedi_device *dev, unsigned int address) { unsigned int value; - const int read_instruction = 0x3; /* bits to tell eeprom to expect a read */ - const int write_length = 8; /* 8 bit write lengths to eeprom */ + /* bits to tell eeprom to expect a read */ + const int read_instruction = 0x3; + /* 8 bit write lengths to eeprom */ + const int write_length = 8; /* enable read/write to eeprom */ devpriv->command5_bits &= ~EEPROM_EN_BIT; -- cgit v1.2.3-59-g8ed1b