From 37ef38f3f83891a2f413fb872bae7d0f9bb95b27 Mon Sep 17 00:00:00 2001 From: Timur Tabi Date: Thu, 27 Jul 2017 16:15:52 -0500 Subject: tty: pl011: fix initialization order of QDF2400 E44 The work-around for Qualcomm Technologies QDF2400 Erratum 44 hinges on a global variable defined in the pl011 driver. The ACPI SPCR parsing code determines whether the work-around is needed, and if so, it changes the console name from "pl011" to "qdf2400_e44". The expectation is that the pl011 driver will implement the work-around when it sees the console name. The global variable qdf2400_e44_present is set when that happens. The problem is that work-around needs to be enabled when the pl011 driver probes, not when the console name is queried. However, sbsa_probe() is called before pl011_console_match(). The work-around appeared to work previously because the default console on QDF2400 platforms was always ttyAMA1. The first time sbsa_probe() is called (for ttyAMA0), qdf2400_e44_present is still false. Then pl011_console_match() is called, and it sets qdf2400_e44_present to true. All subsequent calls to sbsa_probe() enable the work-around. The solution is to move the global variable into spcr.c and let the pl011 driver query it during probe time. This works because all QDF2400 platforms require SPCR, so parse_spcr() will always be called. pl011_console_match still checks for the "qdf2400_e44" console name, but it doesn't do anything else special. Fixes: 5a0722b898f8 ("tty: pl011: use "qdf2400_e44" as the earlycon name for QDF2400 E44") Tested-by: Jeffrey Hugo Signed-off-by: Timur Tabi Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/amba-pl011.c | 37 +++++++++++++++++++------------------ 1 file changed, 19 insertions(+), 18 deletions(-) (limited to 'drivers/tty') diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c index 8a857bb34fbb..1888d168a41c 100644 --- a/drivers/tty/serial/amba-pl011.c +++ b/drivers/tty/serial/amba-pl011.c @@ -142,15 +142,7 @@ static struct vendor_data vendor_sbsa = { .fixed_options = true, }; -/* - * Erratum 44 for QDF2432v1 and QDF2400v1 SoCs describes the BUSY bit as - * occasionally getting stuck as 1. To avoid the potential for a hang, check - * TXFE == 0 instead of BUSY == 1. This may not be suitable for all UART - * implementations, so only do so if an affected platform is detected in - * parse_spcr(). - */ -static bool qdf2400_e44_present = false; - +#ifdef CONFIG_ACPI_SPCR_TABLE static struct vendor_data vendor_qdt_qdf2400_e44 = { .reg_offset = pl011_std_offsets, .fr_busy = UART011_FR_TXFE, @@ -165,6 +157,7 @@ static struct vendor_data vendor_qdt_qdf2400_e44 = { .always_enabled = true, .fixed_options = true, }; +#endif static u16 pl011_st_offsets[REG_ARRAY_SIZE] = { [REG_DR] = UART01x_DR, @@ -2375,12 +2368,14 @@ static int __init pl011_console_match(struct console *co, char *name, int idx, resource_size_t addr; int i; - if (strcmp(name, "qdf2400_e44") == 0) { - pr_info_once("UART: Working around QDF2400 SoC erratum 44"); - qdf2400_e44_present = true; - } else if (strcmp(name, "pl011") != 0) { + /* + * Systems affected by the Qualcomm Technologies QDF2400 E44 erratum + * have a distinct console name, so make sure we check for that. + * The actual implementation of the erratum occurs in the probe + * function. + */ + if ((strcmp(name, "qdf2400_e44") != 0) && (strcmp(name, "pl011") != 0)) return -ENODEV; - } if (uart_parse_earlycon(options, &iotype, &addr, &options)) return -ENODEV; @@ -2734,11 +2729,17 @@ static int sbsa_uart_probe(struct platform_device *pdev) } uap->port.irq = ret; - uap->reg_offset = vendor_sbsa.reg_offset; - uap->vendor = qdf2400_e44_present ? - &vendor_qdt_qdf2400_e44 : &vendor_sbsa; +#ifdef CONFIG_ACPI_SPCR_TABLE + if (qdf2400_e44_present) { + dev_info(&pdev->dev, "working around QDF2400 SoC erratum 44\n"); + uap->vendor = &vendor_qdt_qdf2400_e44; + } else +#endif + uap->vendor = &vendor_sbsa; + + uap->reg_offset = uap->vendor->reg_offset; uap->fifosize = 32; - uap->port.iotype = vendor_sbsa.access_32b ? UPIO_MEM32 : UPIO_MEM; + uap->port.iotype = uap->vendor->access_32b ? UPIO_MEM32 : UPIO_MEM; uap->port.ops = &sbsa_uart_pops; uap->fixed_baud = baudrate; -- cgit v1.2.3-59-g8ed1b From a589e211bd74715a63f507dade294ba618259ff7 Mon Sep 17 00:00:00 2001 From: Jan Kiszka Date: Wed, 19 Jul 2017 07:31:14 +0200 Subject: gpio: exar: Use correct property prefix and document bindings The device-specific property should be prefixed with the vendor name, not "linux,", as Linus Walleij pointed out. Change this and document the bindings of this platform device. We didn't ship the old binding in a release yet. So we can still change it without breaking an official API. Fixes: 380b1e2f3a2f ("gpio-exar/8250-exar: Make set of exported GPIOs configurable") Signed-off-by: Jan Kiszka Acked-by: Rob Herring Signed-off-by: Linus Walleij --- Documentation/devicetree/bindings/gpio/gpio-exar.txt | 5 +++++ drivers/gpio/gpio-exar.c | 2 +- drivers/tty/serial/8250/8250_exar.c | 4 ++-- 3 files changed, 8 insertions(+), 3 deletions(-) create mode 100644 Documentation/devicetree/bindings/gpio/gpio-exar.txt (limited to 'drivers/tty') diff --git a/Documentation/devicetree/bindings/gpio/gpio-exar.txt b/Documentation/devicetree/bindings/gpio/gpio-exar.txt new file mode 100644 index 000000000000..4540d61824af --- /dev/null +++ b/Documentation/devicetree/bindings/gpio/gpio-exar.txt @@ -0,0 +1,5 @@ +Exportable MPIO interface of Exar UART chips + +Required properties of the device: + - exar,first-pin: first exportable pins (0..15) + - ngpios: number of exportable pins (1..16) diff --git a/drivers/gpio/gpio-exar.c b/drivers/gpio/gpio-exar.c index fb8d304cfa17..0ecd2369c2ca 100644 --- a/drivers/gpio/gpio-exar.c +++ b/drivers/gpio/gpio-exar.c @@ -132,7 +132,7 @@ static int gpio_exar_probe(struct platform_device *pdev) if (!p) return -ENOMEM; - ret = device_property_read_u32(&pdev->dev, "linux,first-pin", + ret = device_property_read_u32(&pdev->dev, "exar,first-pin", &first_pin); if (ret) return ret; diff --git a/drivers/tty/serial/8250/8250_exar.c b/drivers/tty/serial/8250/8250_exar.c index b5c98e5bf524..c6360fbdf808 100644 --- a/drivers/tty/serial/8250/8250_exar.c +++ b/drivers/tty/serial/8250/8250_exar.c @@ -261,7 +261,7 @@ __xr17v35x_register_gpio(struct pci_dev *pcidev, } static const struct property_entry exar_gpio_properties[] = { - PROPERTY_ENTRY_U32("linux,first-pin", 0), + PROPERTY_ENTRY_U32("exar,first-pin", 0), PROPERTY_ENTRY_U32("ngpios", 16), { } }; @@ -326,7 +326,7 @@ static int iot2040_rs485_config(struct uart_port *port, } static const struct property_entry iot2040_gpio_properties[] = { - PROPERTY_ENTRY_U32("linux,first-pin", 10), + PROPERTY_ENTRY_U32("exar,first-pin", 10), PROPERTY_ENTRY_U32("ngpios", 1), { } }; -- cgit v1.2.3-59-g8ed1b From 9527b82ae3af1ebf465506868fb55e7f862cd9da Mon Sep 17 00:00:00 2001 From: Sean Young Date: Tue, 1 Aug 2017 12:24:17 +0100 Subject: Revert "serial: Delete dead code for CIR serial ports" This reverts commit 1104321a7b3bb670dc614ffa7958c553e7b3b836. The code is not dead at all and breaks winbond-cir. Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A 00:03: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a CIR port lirc lirc0: lirc_dev: driver ir-lirc-codec (winbond-cir) registered at minor = 0 winbond-cir 00:03: Region 0x2f8-0x2ff already in use! winbond-cir: probe of 00:03 failed with error -16 Signed-off-by: Sean Young Reviewed-by: Matthias Brugger Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/8250/8250_core.c | 23 +++++++++++++++++------ 1 file changed, 17 insertions(+), 6 deletions(-) (limited to 'drivers/tty') diff --git a/drivers/tty/serial/8250/8250_core.c b/drivers/tty/serial/8250/8250_core.c index b5def356af63..1aab3010fbfa 100644 --- a/drivers/tty/serial/8250/8250_core.c +++ b/drivers/tty/serial/8250/8250_core.c @@ -1043,13 +1043,24 @@ int serial8250_register_8250_port(struct uart_8250_port *up) if (up->dl_write) uart->dl_write = up->dl_write; - if (serial8250_isa_config != NULL) - serial8250_isa_config(0, &uart->port, - &uart->capabilities); + if (uart->port.type != PORT_8250_CIR) { + if (serial8250_isa_config != NULL) + serial8250_isa_config(0, &uart->port, + &uart->capabilities); + + ret = uart_add_one_port(&serial8250_reg, + &uart->port); + if (ret == 0) + ret = uart->port.line; + } else { + dev_info(uart->port.dev, + "skipping CIR port at 0x%lx / 0x%llx, IRQ %d\n", + uart->port.iobase, + (unsigned long long)uart->port.mapbase, + uart->port.irq); - ret = uart_add_one_port(&serial8250_reg, &uart->port); - if (ret == 0) - ret = uart->port.line; + ret = 0; + } } mutex_unlock(&serial_mutex); -- cgit v1.2.3-59-g8ed1b