From fac6bf87c55f7f0733efb0375565fb6a50cf2caf Mon Sep 17 00:00:00 2001 From: Amelie Delaunay Date: Tue, 7 Dec 2021 13:45:10 +0100 Subject: usb: dwc2: fix STM ID/VBUS detection startup delay in dwc2_driver_probe When activate_stm_id_vb_detection is enabled, ID and Vbus detection relies on sensing comparators. This detection needs time to stabilize. A delay was already applied in dwc2_resume() when reactivating the detection, but it wasn't done in dwc2_probe(). This patch adds delay after enabling STM ID/VBUS detection. Then, ID state is good when initializing gadget and host, and avoid to get a wrong Connector ID Status Change interrupt. Fixes: a415083a11cc ("usb: dwc2: add support for STM32MP15 SoCs USB OTG HS and FS") Cc: stable Acked-by: Minas Harutyunyan Signed-off-by: Amelie Delaunay Link: https://lore.kernel.org/r/20211207124510.268841-1-amelie.delaunay@foss.st.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/dwc2/platform.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers/usb/dwc2/platform.c') diff --git a/drivers/usb/dwc2/platform.c b/drivers/usb/dwc2/platform.c index c8f18f3ba9e3..c331a5128c2c 100644 --- a/drivers/usb/dwc2/platform.c +++ b/drivers/usb/dwc2/platform.c @@ -575,6 +575,9 @@ static int dwc2_driver_probe(struct platform_device *dev) ggpio |= GGPIO_STM32_OTG_GCCFG_IDEN; ggpio |= GGPIO_STM32_OTG_GCCFG_VBDEN; dwc2_writel(hsotg, ggpio, GGPIO); + + /* ID/VBUS detection startup time */ + usleep_range(5000, 7000); } retval = dwc2_drd_init(hsotg); -- cgit v1.2.3-59-g8ed1b