From c96683798e272366866a5c0ce3073c0b5a256db7 Mon Sep 17 00:00:00 2001 From: Thinh Nguyen Date: Thu, 21 Apr 2022 19:22:50 -0700 Subject: usb: dwc3: ep0: Don't prepare beyond Setup stage Since we can't guarantee that the host won't send new Setup packet before going through the device-initiated disconnect, don't prepare beyond the Setup stage and keep the device in EP0_SETUP_PHASE. This ensures that the device-initated disconnect sequence can go through gracefully. Note that the controller won't service the End Transfer command if it can't DMA out the Setup packet. Signed-off-by: Thinh Nguyen Link: https://lore.kernel.org/r/6bacec56ecabb2c6e49a09cedfcac281fdc97de0.1650593829.git.Thinh.Nguyen@synopsys.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/dwc3/gadget.c | 29 +++++++++++++++++------------ 1 file changed, 17 insertions(+), 12 deletions(-) (limited to 'drivers/usb/dwc3/gadget.c') diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c index 3c0a6c83ea43..5e3311e3cc16 100644 --- a/drivers/usb/dwc3/gadget.c +++ b/drivers/usb/dwc3/gadget.c @@ -2514,6 +2514,23 @@ static int dwc3_gadget_soft_disconnect(struct dwc3 *dwc) spin_lock_irqsave(&dwc->lock, flags); dwc->connected = false; + /* + * Per databook, when we want to stop the gadget, if a control transfer + * is still in process, complete it and get the core into setup phase. + */ + if (dwc->ep0state != EP0_SETUP_PHASE) { + int ret; + + reinit_completion(&dwc->ep0_in_setup); + + spin_unlock_irqrestore(&dwc->lock, flags); + ret = wait_for_completion_timeout(&dwc->ep0_in_setup, + msecs_to_jiffies(DWC3_PULL_UP_TIMEOUT)); + spin_lock_irqsave(&dwc->lock, flags); + if (ret == 0) + dev_warn(dwc->dev, "timed out waiting for SETUP phase\n"); + } + /* * In the Synopsys DesignWare Cores USB3 Databook Rev. 3.30a * Section 4.1.8 Table 4-7, it states that for a device-initiated @@ -2546,18 +2563,6 @@ static int dwc3_gadget_pullup(struct usb_gadget *g, int is_on) return 0; dwc->softconnect = is_on; - /* - * Per databook, when we want to stop the gadget, if a control transfer - * is still in process, complete it and get the core into setup phase. - */ - if (!is_on && dwc->ep0state != EP0_SETUP_PHASE) { - reinit_completion(&dwc->ep0_in_setup); - - ret = wait_for_completion_timeout(&dwc->ep0_in_setup, - msecs_to_jiffies(DWC3_PULL_UP_TIMEOUT)); - if (ret == 0) - dev_warn(dwc->dev, "timed out waiting for SETUP phase\n"); - } /* * Avoid issuing a runtime resume if the device is already in the -- cgit v1.2.3-59-g8ed1b