From 1546e6aecb2490c4510bcd953cbb522d85957791 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Thu, 21 Aug 2014 19:33:25 +0200 Subject: USB: serial: refactor and clean up endpoint handling Refactor and clean up endpoint handling. This specifically moves the endpoint-descriptor arrays of the stack. Note that an err_free_epds label is not yet added to avoid a compilation warning when neither CONFIG_USB_SERIAL_PL2303 or CONFIG_USB_SERIAL_GENERIC is selected. Signed-off-by: Johan Hovold --- drivers/usb/serial/usb-serial.c | 154 +++++++++++++++++++++------------------- 1 file changed, 80 insertions(+), 74 deletions(-) (limited to 'drivers/usb/serial') diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c index e5b859ad15c6..09eb639298c8 100644 --- a/drivers/usb/serial/usb-serial.c +++ b/drivers/usb/serial/usb-serial.c @@ -710,6 +710,53 @@ static const struct tty_port_operations serial_port_ops = { .shutdown = serial_port_shutdown, }; +struct usb_serial_endpoints { + unsigned char num_bulk_in; + unsigned char num_bulk_out; + unsigned char num_interrupt_in; + unsigned char num_interrupt_out; + struct usb_endpoint_descriptor *bulk_in[MAX_NUM_PORTS]; + struct usb_endpoint_descriptor *bulk_out[MAX_NUM_PORTS]; + struct usb_endpoint_descriptor *interrupt_in[MAX_NUM_PORTS]; + struct usb_endpoint_descriptor *interrupt_out[MAX_NUM_PORTS]; +}; + +static void find_endpoints(struct usb_serial *serial, + struct usb_serial_endpoints *epds) +{ + struct device *dev = &serial->interface->dev; + struct usb_host_interface *iface_desc; + struct usb_endpoint_descriptor *epd; + unsigned int i; + + iface_desc = serial->interface->cur_altsetting; + for (i = 0; i < iface_desc->desc.bNumEndpoints; ++i) { + epd = &iface_desc->endpoint[i].desc; + + if (usb_endpoint_is_bulk_in(epd)) { + dev_dbg(dev, "found bulk in on endpoint %u\n", i); + if (epds->num_bulk_in == MAX_NUM_PORTS) + continue; + epds->bulk_in[epds->num_bulk_in++] = epd; + } else if (usb_endpoint_is_bulk_out(epd)) { + dev_dbg(dev, "found bulk out on endpoint %u\n", i); + if (epds->num_bulk_out == MAX_NUM_PORTS) + continue; + epds->bulk_out[epds->num_bulk_out++] = epd; + } else if (usb_endpoint_is_int_in(epd)) { + dev_dbg(dev, "found interrupt in on endpoint %u\n", i); + if (epds->num_interrupt_in == MAX_NUM_PORTS) + continue; + epds->interrupt_in[epds->num_interrupt_in++] = epd; + } else if (usb_endpoint_is_int_out(epd)) { + dev_dbg(dev, "found interrupt out on endpoint %u\n", i); + if (epds->num_interrupt_out == MAX_NUM_PORTS) + continue; + epds->interrupt_out[epds->num_interrupt_out++] = epd; + } + } +} + static int usb_serial_probe(struct usb_interface *interface, const struct usb_device_id *id) { @@ -717,21 +764,13 @@ static int usb_serial_probe(struct usb_interface *interface, struct usb_device *dev = interface_to_usbdev(interface); struct usb_serial *serial = NULL; struct usb_serial_port *port; - struct usb_host_interface *iface_desc; struct usb_endpoint_descriptor *endpoint; - struct usb_endpoint_descriptor *interrupt_in_endpoint[MAX_NUM_PORTS]; - struct usb_endpoint_descriptor *interrupt_out_endpoint[MAX_NUM_PORTS]; - struct usb_endpoint_descriptor *bulk_in_endpoint[MAX_NUM_PORTS]; - struct usb_endpoint_descriptor *bulk_out_endpoint[MAX_NUM_PORTS]; + struct usb_serial_endpoints *epds; struct usb_serial_driver *type = NULL; int retval; int buffer_size; int i; int j; - unsigned char num_interrupt_in = 0; - unsigned char num_interrupt_out = 0; - unsigned char num_bulk_in = 0; - unsigned char num_bulk_out = 0; int num_ports = 0; unsigned char max_endpoints; @@ -770,50 +809,14 @@ static int usb_serial_probe(struct usb_interface *interface, } /* descriptor matches, let's find the endpoints needed */ - /* check out the endpoints */ - iface_desc = interface->cur_altsetting; - for (i = 0; i < iface_desc->desc.bNumEndpoints; ++i) { - endpoint = &iface_desc->endpoint[i].desc; - - if (usb_endpoint_is_bulk_in(endpoint)) { - /* we found a bulk in endpoint */ - dev_dbg(ddev, "found bulk in on endpoint %d\n", i); - if (num_bulk_in < MAX_NUM_PORTS) { - bulk_in_endpoint[num_bulk_in] = endpoint; - ++num_bulk_in; - } - } - - if (usb_endpoint_is_bulk_out(endpoint)) { - /* we found a bulk out endpoint */ - dev_dbg(ddev, "found bulk out on endpoint %d\n", i); - if (num_bulk_out < MAX_NUM_PORTS) { - bulk_out_endpoint[num_bulk_out] = endpoint; - ++num_bulk_out; - } - } - - if (usb_endpoint_is_int_in(endpoint)) { - /* we found a interrupt in endpoint */ - dev_dbg(ddev, "found interrupt in on endpoint %d\n", i); - if (num_interrupt_in < MAX_NUM_PORTS) { - interrupt_in_endpoint[num_interrupt_in] = - endpoint; - ++num_interrupt_in; - } - } - - if (usb_endpoint_is_int_out(endpoint)) { - /* we found an interrupt out endpoint */ - dev_dbg(ddev, "found interrupt out on endpoint %d\n", i); - if (num_interrupt_out < MAX_NUM_PORTS) { - interrupt_out_endpoint[num_interrupt_out] = - endpoint; - ++num_interrupt_out; - } - } + epds = kzalloc(sizeof(*epds), GFP_KERNEL); + if (!epds) { + retval = -ENOMEM; + goto err_put_serial; } + find_endpoints(serial, epds); + #if IS_ENABLED(CONFIG_USB_SERIAL_PL2303) /* BEGIN HORRIBLE HACK FOR PL2303 */ /* this is needed due to the looney way its endpoints are set up */ @@ -826,6 +829,8 @@ static int usb_serial_probe(struct usb_interface *interface, ((le16_to_cpu(dev->descriptor.idVendor) == SIEMENS_VENDOR_ID) && (le16_to_cpu(dev->descriptor.idProduct) == SIEMENS_PRODUCT_ID_EF81))) { if (interface != dev->actconfig->interface[0]) { + struct usb_host_interface *iface_desc; + /* check out the endpoints of the other interface*/ iface_desc = dev->actconfig->interface[0]->cur_altsetting; for (i = 0; i < iface_desc->desc.bNumEndpoints; ++i) { @@ -833,10 +838,8 @@ static int usb_serial_probe(struct usb_interface *interface, if (usb_endpoint_is_int_in(endpoint)) { /* we found a interrupt in endpoint */ dev_dbg(ddev, "found interrupt in for Prolific device on separate interface\n"); - if (num_interrupt_in < MAX_NUM_PORTS) { - interrupt_in_endpoint[num_interrupt_in] = endpoint; - ++num_interrupt_in; - } + if (epds->num_interrupt_in < ARRAY_SIZE(epds->interrupt_in)) + epds->interrupt_in[epds->num_interrupt_in++] = endpoint; } } } @@ -845,9 +848,10 @@ static int usb_serial_probe(struct usb_interface *interface, * If not, give up now and hope this hack will work * properly during a later invocation of usb_serial_probe */ - if (num_bulk_in == 0 || num_bulk_out == 0) { + if (epds->num_bulk_in == 0 || epds->num_bulk_out == 0) { dev_info(ddev, "PL-2303 hack: descriptors matched but endpoints did not\n"); retval = -ENODEV; + kfree(epds); goto err_put_serial; } } @@ -856,10 +860,11 @@ static int usb_serial_probe(struct usb_interface *interface, #ifdef CONFIG_USB_SERIAL_GENERIC if (type == &usb_serial_generic_device) { - num_ports = num_bulk_out; + num_ports = epds->num_bulk_out; if (num_ports == 0) { dev_err(ddev, "Generic device with no bulk out, not allowed.\n"); retval = -EIO; + kfree(epds); goto err_put_serial; } dev_info(ddev, "The \"generic\" usb-serial driver is only for testing and one-off prototypes.\n"); @@ -880,10 +885,10 @@ static int usb_serial_probe(struct usb_interface *interface, } serial->num_ports = (unsigned char)num_ports; - serial->num_bulk_in = num_bulk_in; - serial->num_bulk_out = num_bulk_out; - serial->num_interrupt_in = num_interrupt_in; - serial->num_interrupt_out = num_interrupt_out; + serial->num_bulk_in = epds->num_bulk_in; + serial->num_bulk_out = epds->num_bulk_out; + serial->num_interrupt_in = epds->num_interrupt_in; + serial->num_interrupt_out = epds->num_interrupt_out; /* found all that we need */ dev_info(ddev, "%s converter detected\n", type->description); @@ -891,9 +896,9 @@ static int usb_serial_probe(struct usb_interface *interface, /* create our ports, we need as many as the max endpoints */ /* we don't use num_ports here because some devices have more endpoint pairs than ports */ - max_endpoints = max(num_bulk_in, num_bulk_out); - max_endpoints = max(max_endpoints, num_interrupt_in); - max_endpoints = max(max_endpoints, num_interrupt_out); + max_endpoints = max(epds->num_bulk_in, epds->num_bulk_out); + max_endpoints = max(max_endpoints, epds->num_interrupt_in); + max_endpoints = max(max_endpoints, epds->num_interrupt_out); max_endpoints = max(max_endpoints, serial->num_ports); serial->num_port_pointers = max_endpoints; @@ -919,8 +924,8 @@ static int usb_serial_probe(struct usb_interface *interface, } /* set up the endpoint information */ - for (i = 0; i < num_bulk_in; ++i) { - endpoint = bulk_in_endpoint[i]; + for (i = 0; i < epds->num_bulk_in; ++i) { + endpoint = epds->bulk_in[i]; port = serial->port[i]; buffer_size = max_t(int, serial->type->bulk_in_size, usb_endpoint_maxp(endpoint)); @@ -948,8 +953,8 @@ static int usb_serial_probe(struct usb_interface *interface, port->bulk_in_buffer = port->bulk_in_buffers[0]; } - for (i = 0; i < num_bulk_out; ++i) { - endpoint = bulk_out_endpoint[i]; + for (i = 0; i < epds->num_bulk_out; ++i) { + endpoint = epds->bulk_out[i]; port = serial->port[i]; if (kfifo_alloc(&port->write_fifo, PAGE_SIZE, GFP_KERNEL)) goto probe_error; @@ -981,8 +986,8 @@ static int usb_serial_probe(struct usb_interface *interface, } if (serial->type->read_int_callback) { - for (i = 0; i < num_interrupt_in; ++i) { - endpoint = interrupt_in_endpoint[i]; + for (i = 0; i < epds->num_interrupt_in; ++i) { + endpoint = epds->interrupt_in[i]; port = serial->port[i]; port->interrupt_in_urb = usb_alloc_urb(0, GFP_KERNEL); if (!port->interrupt_in_urb) @@ -1001,13 +1006,13 @@ static int usb_serial_probe(struct usb_interface *interface, serial->type->read_int_callback, port, endpoint->bInterval); } - } else if (num_interrupt_in) { + } else if (epds->num_interrupt_in) { dev_dbg(ddev, "The device claims to support interrupt in transfers, but read_int_callback is not defined\n"); } if (serial->type->write_int_callback) { - for (i = 0; i < num_interrupt_out; ++i) { - endpoint = interrupt_out_endpoint[i]; + for (i = 0; i < epds->num_interrupt_out; ++i) { + endpoint = epds->interrupt_out[i]; port = serial->port[i]; port->interrupt_out_urb = usb_alloc_urb(0, GFP_KERNEL); if (!port->interrupt_out_urb) @@ -1027,7 +1032,7 @@ static int usb_serial_probe(struct usb_interface *interface, serial->type->write_int_callback, port, endpoint->bInterval); } - } else if (num_interrupt_out) { + } else if (epds->num_interrupt_out) { dev_dbg(ddev, "The device claims to support interrupt out transfers, but write_int_callback is not defined\n"); } @@ -1077,6 +1082,7 @@ static int usb_serial_probe(struct usb_interface *interface, if (num_ports > 0) usb_serial_console_init(serial->port[0]->minor); exit: + kfree(epds); module_put(type->driver.owner); return 0; -- cgit v1.2.3-59-g8ed1b