From 30647217909ea8ce4d8f4905b15fa1bb09d80859 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Tue, 31 May 2016 10:05:13 -0500 Subject: usb: musb: Remove conditional PM runtime calls for musb_gadget The conditional use of PM runtime does not work properly for musb gadget. On cable disconnect we may not get any USB_EVENT_NONE leaving the PM runtime call unpaired. Let's fix the issue by making sure the PM runtime calls are paired within the functions. The glue layer will take care of the rest. Signed-off-by: Tony Lindgren Signed-off-by: Bin Liu Signed-off-by: Greg Kroah-Hartman --- drivers/usb/musb/musb_gadget.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) (limited to 'drivers/usb') diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c index fff5a8a283e3..7ecc893ff3ba 100644 --- a/drivers/usb/musb/musb_gadget.c +++ b/drivers/usb/musb/musb_gadget.c @@ -1914,8 +1914,8 @@ static int musb_gadget_start(struct usb_gadget *g, if (musb->xceiv->last_event == USB_EVENT_ID) musb_platform_set_vbus(musb, 1); - if (musb->xceiv->last_event == USB_EVENT_NONE) - pm_runtime_put(musb->controller); + pm_runtime_mark_last_busy(musb->controller); + pm_runtime_put_autosuspend(musb->controller); return 0; @@ -1934,8 +1934,7 @@ static int musb_gadget_stop(struct usb_gadget *g) struct musb *musb = gadget_to_musb(g); unsigned long flags; - if (musb->xceiv->last_event == USB_EVENT_NONE) - pm_runtime_get_sync(musb->controller); + pm_runtime_get_sync(musb->controller); /* * REVISIT always use otg_set_peripheral() here too; -- cgit v1.2.3-59-g8ed1b