From 394a10331a9e43100a8ee293255cfc428c7355ac Mon Sep 17 00:00:00 2001
From: Johan Hovold <johan@kernel.org>
Date: Thu, 19 Feb 2015 12:34:41 +0700
Subject: USB: ch341: remove redundant close from open error path

Remove redundant call to ch341_close from error path when submission of
the interrupt urb fails in open.

Signed-off-by: Johan Hovold <johan@kernel.org>
---
 drivers/usb/serial/ch341.c | 1 -
 1 file changed, 1 deletion(-)

(limited to 'drivers/usb')

diff --git a/drivers/usb/serial/ch341.c b/drivers/usb/serial/ch341.c
index 2d72aa3564a3..79c56d93d666 100644
--- a/drivers/usb/serial/ch341.c
+++ b/drivers/usb/serial/ch341.c
@@ -328,7 +328,6 @@ static int ch341_open(struct tty_struct *tty, struct usb_serial_port *port)
 	if (r) {
 		dev_err(&port->dev, "%s - failed to submit interrupt urb: %d\n",
 			__func__, r);
-		ch341_close(port);
 		goto out;
 	}
 
-- 
cgit v1.2.3-59-g8ed1b


From d5638fcf15bc65584877f00d4b0094cc4a66ad4e Mon Sep 17 00:00:00 2001
From: Felipe Balbi <balbi@ti.com>
Date: Mon, 2 Feb 2015 17:14:12 -0600
Subject: usb: musb: gadget: get rid of stop_activity()

that function is pretty close to a no-op by now,
all we need is a call to musb_stop().

Signed-off-by: Felipe Balbi <balbi@ti.com>
---
 drivers/usb/musb/musb_gadget.c | 40 +---------------------------------------
 1 file changed, 1 insertion(+), 39 deletions(-)

(limited to 'drivers/usb')

diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c
index b2d9040c7685..4c481cd66c77 100644
--- a/drivers/usb/musb/musb_gadget.c
+++ b/drivers/usb/musb/musb_gadget.c
@@ -1876,44 +1876,6 @@ err:
 	return retval;
 }
 
-static void stop_activity(struct musb *musb, struct usb_gadget_driver *driver)
-{
-	int			i;
-	struct musb_hw_ep	*hw_ep;
-
-	/* don't disconnect if it's not connected */
-	if (musb->g.speed == USB_SPEED_UNKNOWN)
-		driver = NULL;
-	else
-		musb->g.speed = USB_SPEED_UNKNOWN;
-
-	/* deactivate the hardware */
-	if (musb->softconnect) {
-		musb->softconnect = 0;
-		musb_pullup(musb, 0);
-	}
-	musb_stop(musb);
-
-	/* killing any outstanding requests will quiesce the driver;
-	 * then report disconnect
-	 */
-	if (driver) {
-		for (i = 0, hw_ep = musb->endpoints;
-				i < musb->nr_endpoints;
-				i++, hw_ep++) {
-			musb_ep_select(musb->mregs, i);
-			if (hw_ep->is_shared_fifo /* || !epnum */) {
-				nuke(&hw_ep->ep_in, -ESHUTDOWN);
-			} else {
-				if (hw_ep->max_packet_sz_tx)
-					nuke(&hw_ep->ep_in, -ESHUTDOWN);
-				if (hw_ep->max_packet_sz_rx)
-					nuke(&hw_ep->ep_out, -ESHUTDOWN);
-			}
-		}
-	}
-}
-
 /*
  * Unregister the gadget driver. Used by gadget drivers when
  * unregistering themselves from the controller.
@@ -1940,7 +1902,7 @@ static int musb_gadget_stop(struct usb_gadget *g)
 	(void) musb_gadget_vbus_draw(&musb->g, 0);
 
 	musb->xceiv->otg->state = OTG_STATE_UNDEFINED;
-	stop_activity(musb, NULL);
+	musb_stop(musb);
 	otg_set_peripheral(musb->xceiv->otg, NULL);
 
 	musb->is_active = 0;
-- 
cgit v1.2.3-59-g8ed1b


From e3c93e1a3f35be4cf1493d3ccfb0c6d9209e4922 Mon Sep 17 00:00:00 2001
From: Felipe Balbi <balbi@ti.com>
Date: Mon, 30 Dec 2013 12:33:53 -0600
Subject: usb: musb: core: fix TX/RX endpoint order

As per Mentor Graphics' documentation, we should
always handle TX endpoints before RX endpoints.

This patch fixes that error while also updating
some hard-to-read comments which were scattered
around musb_interrupt().

This patch should be backported as far back as
possible since this error has been in the driver
since it's conception.

Cc: <stable@vger.kernel.org>
Signed-off-by: Felipe Balbi <balbi@ti.com>
---
 drivers/usb/musb/musb_core.c | 44 ++++++++++++++++++++++++++------------------
 1 file changed, 26 insertions(+), 18 deletions(-)

(limited to 'drivers/usb')

diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c
index 067920f2d570..461bfe8efcf2 100644
--- a/drivers/usb/musb/musb_core.c
+++ b/drivers/usb/musb/musb_core.c
@@ -1597,16 +1597,30 @@ irqreturn_t musb_interrupt(struct musb *musb)
 		is_host_active(musb) ? "host" : "peripheral",
 		musb->int_usb, musb->int_tx, musb->int_rx);
 
-	/* the core can interrupt us for multiple reasons; docs have
-	 * a generic interrupt flowchart to follow
+	/**
+	 * According to Mentor Graphics' documentation, flowchart on page 98,
+	 * IRQ should be handled as follows:
+	 *
+	 * . Resume IRQ
+	 * . Session Request IRQ
+	 * . VBUS Error IRQ
+	 * . Suspend IRQ
+	 * . Connect IRQ
+	 * . Disconnect IRQ
+	 * . Reset/Babble IRQ
+	 * . SOF IRQ (we're not using this one)
+	 * . Endpoint 0 IRQ
+	 * . TX Endpoints
+	 * . RX Endpoints
+	 *
+	 * We will be following that flowchart in order to avoid any problems
+	 * that might arise with internal Finite State Machine.
 	 */
+
 	if (musb->int_usb)
 		retval |= musb_stage0_irq(musb, musb->int_usb,
 				devctl);
 
-	/* "stage 1" is handling endpoint irqs */
-
-	/* handle endpoint 0 first */
 	if (musb->int_tx & 1) {
 		if (is_host_active(musb))
 			retval |= musb_h_ep0_irq(musb);
@@ -1614,37 +1628,31 @@ irqreturn_t musb_interrupt(struct musb *musb)
 			retval |= musb_g_ep0_irq(musb);
 	}
 
-	/* RX on endpoints 1-15 */
-	reg = musb->int_rx >> 1;
+	reg = musb->int_tx >> 1;
 	ep_num = 1;
 	while (reg) {
 		if (reg & 1) {
-			/* musb_ep_select(musb->mregs, ep_num); */
-			/* REVISIT just retval = ep->rx_irq(...) */
 			retval = IRQ_HANDLED;
 			if (is_host_active(musb))
-				musb_host_rx(musb, ep_num);
+				musb_host_tx(musb, ep_num);
 			else
-				musb_g_rx(musb, ep_num);
+				musb_g_tx(musb, ep_num);
 		}
-
 		reg >>= 1;
 		ep_num++;
 	}
 
-	/* TX on endpoints 1-15 */
-	reg = musb->int_tx >> 1;
+	reg = musb->int_rx >> 1;
 	ep_num = 1;
 	while (reg) {
 		if (reg & 1) {
-			/* musb_ep_select(musb->mregs, ep_num); */
-			/* REVISIT just retval |= ep->tx_irq(...) */
 			retval = IRQ_HANDLED;
 			if (is_host_active(musb))
-				musb_host_tx(musb, ep_num);
+				musb_host_rx(musb, ep_num);
 			else
-				musb_g_tx(musb, ep_num);
+				musb_g_rx(musb, ep_num);
 		}
+
 		reg >>= 1;
 		ep_num++;
 	}
-- 
cgit v1.2.3-59-g8ed1b


From 31a0ede0de49a5897d7d97c68228ae79f86c38f0 Mon Sep 17 00:00:00 2001
From: Felipe Balbi <balbi@ti.com>
Date: Mon, 30 Dec 2013 12:42:38 -0600
Subject: usb: musb: core: improve musb_interrupt() a bit

instead of using manually spelled out bit-shits
and iterate over each of the 16-bits (one for
each endpoint) on each direction, we can make use
of for_each_set_bit() which internally uses
find_first_bit().

This makes the code slightly more readable while
also making we only iterate over bits which are
actually set.

Signed-off-by: Felipe Balbi <balbi@ti.com>
---
 drivers/usb/musb/musb_core.c | 52 ++++++++++++++++++++------------------------
 1 file changed, 24 insertions(+), 28 deletions(-)

(limited to 'drivers/usb')

diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c
index 461bfe8efcf2..e59ae7395ba8 100644
--- a/drivers/usb/musb/musb_core.c
+++ b/drivers/usb/musb/musb_core.c
@@ -1587,9 +1587,12 @@ static int musb_core_init(u16 musb_type, struct musb *musb)
 irqreturn_t musb_interrupt(struct musb *musb)
 {
 	irqreturn_t	retval = IRQ_NONE;
+	unsigned long	status;
+	unsigned long	epnum;
 	u8		devctl;
-	int		ep_num;
-	u32		reg;
+
+	if (!musb->int_usb && !musb->int_tx && !musb->int_rx)
+		return IRQ_NONE;
 
 	devctl = musb_readb(musb->mregs, MUSB_DEVCTL);
 
@@ -1618,43 +1621,36 @@ irqreturn_t musb_interrupt(struct musb *musb)
 	 */
 
 	if (musb->int_usb)
-		retval |= musb_stage0_irq(musb, musb->int_usb,
-				devctl);
+		retval |= musb_stage0_irq(musb, musb->int_usb, devctl);
 
 	if (musb->int_tx & 1) {
 		if (is_host_active(musb))
 			retval |= musb_h_ep0_irq(musb);
 		else
 			retval |= musb_g_ep0_irq(musb);
+
+		/* we have just handled endpoint 0 IRQ, clear it */
+		musb->int_tx &= ~BIT(0);
 	}
 
-	reg = musb->int_tx >> 1;
-	ep_num = 1;
-	while (reg) {
-		if (reg & 1) {
-			retval = IRQ_HANDLED;
-			if (is_host_active(musb))
-				musb_host_tx(musb, ep_num);
-			else
-				musb_g_tx(musb, ep_num);
-		}
-		reg >>= 1;
-		ep_num++;
+	status = musb->int_tx;
+
+	for_each_set_bit(epnum, &status, 16) {
+		retval = IRQ_HANDLED;
+		if (is_host_active(musb))
+			musb_host_tx(musb, epnum);
+		else
+			musb_g_tx(musb, epnum);
 	}
 
-	reg = musb->int_rx >> 1;
-	ep_num = 1;
-	while (reg) {
-		if (reg & 1) {
-			retval = IRQ_HANDLED;
-			if (is_host_active(musb))
-				musb_host_rx(musb, ep_num);
-			else
-				musb_g_rx(musb, ep_num);
-		}
+	status = musb->int_rx;
 
-		reg >>= 1;
-		ep_num++;
+	for_each_set_bit(epnum, &status, 16) {
+		retval = IRQ_HANDLED;
+		if (is_host_active(musb))
+			musb_host_rx(musb, epnum);
+		else
+			musb_g_rx(musb, epnum);
 	}
 
 	return retval;
-- 
cgit v1.2.3-59-g8ed1b


From 3da1f6ee3563f84395e5d334349a4c9e25d8cbcb Mon Sep 17 00:00:00 2001
From: Felipe Balbi <balbi@ti.com>
Date: Tue, 2 Sep 2014 15:19:43 -0500
Subject: usb: dwc3: core: only reset res->start in case of error

That trick is only needed if we end up with an error, so
there's no point in messing that outside of an error path.

In fact doing so causes problems when removing dwc3.ko,
problems which commit c5a1fbc (usb: dwc3: dwc3-omap: Fix
the crash on module removal) mistakenly tried to fix.

Signed-off-by: Felipe Balbi <balbi@ti.com>
---
 drivers/usb/dwc3/core.c | 56 ++++++++++++++++++++++++++++++-------------------
 1 file changed, 34 insertions(+), 22 deletions(-)

(limited to 'drivers/usb')

diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
index 9f0e209b8f6c..cd59e919e27e 100644
--- a/drivers/usb/dwc3/core.c
+++ b/drivers/usb/dwc3/core.c
@@ -774,17 +774,13 @@ static int dwc3_probe(struct platform_device *pdev)
 	 * since it will be requested by the xhci-plat driver.
 	 */
 	regs = devm_ioremap_resource(dev, res);
-	if (IS_ERR(regs))
-		return PTR_ERR(regs);
+	if (IS_ERR(regs)) {
+		ret = PTR_ERR(regs);
+		goto err0;
+	}
 
 	dwc->regs	= regs;
 	dwc->regs_size	= resource_size(res);
-	/*
-	 * restore res->start back to its original value so that,
-	 * in case the probe is deferred, we don't end up getting error in
-	 * request the memory region the next time probe is called.
-	 */
-	res->start -= DWC3_GLOBALS_REGS_START;
 
 	/* default to highest possible threshold */
 	lpm_nyet_threshold = 0xff;
@@ -878,7 +874,7 @@ static int dwc3_probe(struct platform_device *pdev)
 
 	ret = dwc3_core_get_phy(dwc);
 	if (ret)
-		return ret;
+		goto err0;
 
 	spin_lock_init(&dwc->lock);
 	platform_set_drvdata(pdev, dwc);
@@ -899,7 +895,7 @@ static int dwc3_probe(struct platform_device *pdev)
 	if (ret) {
 		dev_err(dwc->dev, "failed to allocate event buffers\n");
 		ret = -ENOMEM;
-		goto err0;
+		goto err1;
 	}
 
 	if (IS_ENABLED(CONFIG_USB_DWC3_HOST))
@@ -913,65 +909,81 @@ static int dwc3_probe(struct platform_device *pdev)
 	ret = dwc3_core_init(dwc);
 	if (ret) {
 		dev_err(dev, "failed to initialize core\n");
-		goto err0;
+		goto err1;
 	}
 
 	usb_phy_set_suspend(dwc->usb2_phy, 0);
 	usb_phy_set_suspend(dwc->usb3_phy, 0);
 	ret = phy_power_on(dwc->usb2_generic_phy);
 	if (ret < 0)
-		goto err1;
+		goto err2;
 
 	ret = phy_power_on(dwc->usb3_generic_phy);
 	if (ret < 0)
-		goto err_usb2phy_power;
+		goto err3;
 
 	ret = dwc3_event_buffers_setup(dwc);
 	if (ret) {
 		dev_err(dwc->dev, "failed to setup event buffers\n");
-		goto err_usb3phy_power;
+		goto err4;
 	}
 
 	ret = dwc3_core_init_mode(dwc);
 	if (ret)
-		goto err2;
+		goto err5;
 
 	ret = dwc3_debugfs_init(dwc);
 	if (ret) {
 		dev_err(dev, "failed to initialize debugfs\n");
-		goto err3;
+		goto err6;
 	}
 
 	pm_runtime_allow(dev);
 
 	return 0;
 
-err3:
+err6:
 	dwc3_core_exit_mode(dwc);
 
-err2:
+err5:
 	dwc3_event_buffers_cleanup(dwc);
 
-err_usb3phy_power:
+err4:
 	phy_power_off(dwc->usb3_generic_phy);
 
-err_usb2phy_power:
+err3:
 	phy_power_off(dwc->usb2_generic_phy);
 
-err1:
+err2:
 	usb_phy_set_suspend(dwc->usb2_phy, 1);
 	usb_phy_set_suspend(dwc->usb3_phy, 1);
 	dwc3_core_exit(dwc);
 
-err0:
+err1:
 	dwc3_free_event_buffers(dwc);
 
+err0:
+	/*
+	 * restore res->start back to its original value so that, in case the
+	 * probe is deferred, we don't end up getting error in request the
+	 * memory region the next time probe is called.
+	 */
+	res->start -= DWC3_GLOBALS_REGS_START;
+
 	return ret;
 }
 
 static int dwc3_remove(struct platform_device *pdev)
 {
 	struct dwc3	*dwc = platform_get_drvdata(pdev);
+	struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+
+	/*
+	 * restore res->start back to its original value so that, in case the
+	 * probe is deferred, we don't end up getting error in request the
+	 * memory region the next time probe is called.
+	 */
+	res->start -= DWC3_GLOBALS_REGS_START;
 
 	dwc3_debugfs_exit(dwc);
 	dwc3_core_exit_mode(dwc);
-- 
cgit v1.2.3-59-g8ed1b


From 3d0184d087573b7606de45a8e4f01b6222caa47a Mon Sep 17 00:00:00 2001
From: Felipe Balbi <balbi@ti.com>
Date: Tue, 2 Sep 2014 14:12:26 -0500
Subject: usb: dwc3: omap: call of_platform_depopulate() instead

This patch fixes a bug where removing dwc3-omap.ko
would not trigger removal of dwc3.ko.

of_platform_depopulate() already bakes an easy to
use API for removing all our children which were
populated during probe(); Let's use that one instead
of cooking our own solution.

Note that this is kind of a revert of commit c5a1fbc
(usb: dwc3: dwc3-omap: Fix the crash on module removal)
although we can't simply revert that because a direct
call to platform_device_unregister would also be flakey.

Signed-off-by: Felipe Balbi <balbi@ti.com>
---
 drivers/usb/dwc3/dwc3-omap.c | 11 +----------
 1 file changed, 1 insertion(+), 10 deletions(-)

(limited to 'drivers/usb')

diff --git a/drivers/usb/dwc3/dwc3-omap.c b/drivers/usb/dwc3/dwc3-omap.c
index 52e0c4e5e48e..edba5348be18 100644
--- a/drivers/usb/dwc3/dwc3-omap.c
+++ b/drivers/usb/dwc3/dwc3-omap.c
@@ -325,15 +325,6 @@ static irqreturn_t dwc3_omap_interrupt(int irq, void *_omap)
 	return IRQ_HANDLED;
 }
 
-static int dwc3_omap_remove_core(struct device *dev, void *c)
-{
-	struct platform_device *pdev = to_platform_device(dev);
-
-	of_device_unregister(pdev);
-
-	return 0;
-}
-
 static void dwc3_omap_enable_irqs(struct dwc3_omap *omap)
 {
 	u32			reg;
@@ -600,7 +591,7 @@ static int dwc3_omap_remove(struct platform_device *pdev)
 	if (omap->extcon_id_dev.edev)
 		extcon_unregister_interest(&omap->extcon_id_dev);
 	dwc3_omap_disable_irqs(omap);
-	device_for_each_child(&pdev->dev, NULL, dwc3_omap_remove_core);
+	of_platform_depopulate(omap->dev);
 	pm_runtime_put_sync(&pdev->dev);
 	pm_runtime_disable(&pdev->dev);
 
-- 
cgit v1.2.3-59-g8ed1b


From 8f2c9544aba636134303105ecb164190a39dece4 Mon Sep 17 00:00:00 2001
From: Felipe Balbi <balbi@ti.com>
Date: Thu, 4 Sep 2014 13:14:49 -0500
Subject: usb: dwc3: gadget: drop unnecessary loop when cleaning up TRBs

Now that we're using XFERINPROGRESS for all endpoint
types (except Control), we will *always* be completing
one TRB at a time, so it's safe to remove the loop
from dwc3_cleanup_done_reqs.

Signed-off-by: Felipe Balbi <balbi@ti.com>
---
 drivers/usb/dwc3/gadget.c | 37 ++++++++++++++++---------------------
 1 file changed, 16 insertions(+), 21 deletions(-)

(limited to 'drivers/usb')

diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
index a03a485205c7..8946c32047e9 100644
--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -1855,32 +1855,27 @@ static int dwc3_cleanup_done_reqs(struct dwc3 *dwc, struct dwc3_ep *dep,
 	unsigned int		i;
 	int			ret;
 
+	req = next_request(&dep->req_queued);
+	if (!req) {
+		WARN_ON_ONCE(1);
+		return 1;
+	}
+	i = 0;
 	do {
-		req = next_request(&dep->req_queued);
-		if (!req) {
-			WARN_ON_ONCE(1);
-			return 1;
-		}
-		i = 0;
-		do {
-			slot = req->start_slot + i;
-			if ((slot == DWC3_TRB_NUM - 1) &&
+		slot = req->start_slot + i;
+		if ((slot == DWC3_TRB_NUM - 1) &&
 				usb_endpoint_xfer_isoc(dep->endpoint.desc))
-				slot++;
-			slot %= DWC3_TRB_NUM;
-			trb = &dep->trb_pool[slot];
-
-			ret = __dwc3_cleanup_done_trbs(dwc, dep, req, trb,
-					event, status);
-			if (ret)
-				break;
-		}while (++i < req->request.num_mapped_sgs);
-
-		dwc3_gadget_giveback(dep, req, status);
+			slot++;
+		slot %= DWC3_TRB_NUM;
+		trb = &dep->trb_pool[slot];
 
+		ret = __dwc3_cleanup_done_trbs(dwc, dep, req, trb,
+				event, status);
 		if (ret)
 			break;
-	} while (1);
+	} while (++i < req->request.num_mapped_sgs);
+
+	dwc3_gadget_giveback(dep, req, status);
 
 	if (usb_endpoint_xfer_isoc(dep->endpoint.desc) &&
 			list_empty(&dep->req_queued)) {
-- 
cgit v1.2.3-59-g8ed1b


From 25140ce627f43df1d425d591ac3d360b48ae24e1 Mon Sep 17 00:00:00 2001
From: Joe Perches <joe@perches.com>
Date: Sat, 21 Feb 2015 18:53:37 -0800
Subject: usb: gadget: udc: pxa27x_udc: Remove use of seq_printf return value

The seq_printf return value, because it's frequently misused,
will eventually be converted to void.

See: commit 1f33c41c03da ("seq_file: Rename seq_overflow() to
     seq_has_overflowed() and make public")

While there, simplify the error handler logic by returning
immediately and remove the unnecessary labels.

Tested-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
---
 drivers/usb/gadget/udc/pxa27x_udc.c | 132 ++++++++++++++++--------------------
 1 file changed, 60 insertions(+), 72 deletions(-)

(limited to 'drivers/usb')

diff --git a/drivers/usb/gadget/udc/pxa27x_udc.c b/drivers/usb/gadget/udc/pxa27x_udc.c
index 6a855fc9bd84..486f7546de8c 100644
--- a/drivers/usb/gadget/udc/pxa27x_udc.c
+++ b/drivers/usb/gadget/udc/pxa27x_udc.c
@@ -93,50 +93,46 @@ static void handle_ep(struct pxa_ep *ep);
 static int state_dbg_show(struct seq_file *s, void *p)
 {
 	struct pxa_udc *udc = s->private;
-	int pos = 0, ret;
 	u32 tmp;
 
-	ret = -ENODEV;
 	if (!udc->driver)
-		goto out;
+		return -ENODEV;
 
 	/* basic device status */
-	pos += seq_printf(s, DRIVER_DESC "\n"
-			 "%s version: %s\nGadget driver: %s\n",
-			 driver_name, DRIVER_VERSION,
-			 udc->driver ? udc->driver->driver.name : "(none)");
+	seq_printf(s, DRIVER_DESC "\n"
+		   "%s version: %s\n"
+		   "Gadget driver: %s\n",
+		   driver_name, DRIVER_VERSION,
+		   udc->driver ? udc->driver->driver.name : "(none)");
 
 	tmp = udc_readl(udc, UDCCR);
-	pos += seq_printf(s,
-			 "udccr=0x%0x(%s%s%s%s%s%s%s%s%s%s), "
-			 "con=%d,inter=%d,altinter=%d\n", tmp,
-			 (tmp & UDCCR_OEN) ? " oen":"",
-			 (tmp & UDCCR_AALTHNP) ? " aalthnp":"",
-			 (tmp & UDCCR_AHNP) ? " rem" : "",
-			 (tmp & UDCCR_BHNP) ? " rstir" : "",
-			 (tmp & UDCCR_DWRE) ? " dwre" : "",
-			 (tmp & UDCCR_SMAC) ? " smac" : "",
-			 (tmp & UDCCR_EMCE) ? " emce" : "",
-			 (tmp & UDCCR_UDR) ? " udr" : "",
-			 (tmp & UDCCR_UDA) ? " uda" : "",
-			 (tmp & UDCCR_UDE) ? " ude" : "",
-			 (tmp & UDCCR_ACN) >> UDCCR_ACN_S,
-			 (tmp & UDCCR_AIN) >> UDCCR_AIN_S,
-			 (tmp & UDCCR_AAISN) >> UDCCR_AAISN_S);
+	seq_printf(s,
+		   "udccr=0x%0x(%s%s%s%s%s%s%s%s%s%s), con=%d,inter=%d,altinter=%d\n",
+		   tmp,
+		   (tmp & UDCCR_OEN) ? " oen":"",
+		   (tmp & UDCCR_AALTHNP) ? " aalthnp":"",
+		   (tmp & UDCCR_AHNP) ? " rem" : "",
+		   (tmp & UDCCR_BHNP) ? " rstir" : "",
+		   (tmp & UDCCR_DWRE) ? " dwre" : "",
+		   (tmp & UDCCR_SMAC) ? " smac" : "",
+		   (tmp & UDCCR_EMCE) ? " emce" : "",
+		   (tmp & UDCCR_UDR) ? " udr" : "",
+		   (tmp & UDCCR_UDA) ? " uda" : "",
+		   (tmp & UDCCR_UDE) ? " ude" : "",
+		   (tmp & UDCCR_ACN) >> UDCCR_ACN_S,
+		   (tmp & UDCCR_AIN) >> UDCCR_AIN_S,
+		   (tmp & UDCCR_AAISN) >> UDCCR_AAISN_S);
 	/* registers for device and ep0 */
-	pos += seq_printf(s, "udcicr0=0x%08x udcicr1=0x%08x\n",
-			udc_readl(udc, UDCICR0), udc_readl(udc, UDCICR1));
-	pos += seq_printf(s, "udcisr0=0x%08x udcisr1=0x%08x\n",
-			udc_readl(udc, UDCISR0), udc_readl(udc, UDCISR1));
-	pos += seq_printf(s, "udcfnr=%d\n", udc_readl(udc, UDCFNR));
-	pos += seq_printf(s, "irqs: reset=%lu, suspend=%lu, resume=%lu, "
-			"reconfig=%lu\n",
-			udc->stats.irqs_reset, udc->stats.irqs_suspend,
-			udc->stats.irqs_resume, udc->stats.irqs_reconfig);
-
-	ret = 0;
-out:
-	return ret;
+	seq_printf(s, "udcicr0=0x%08x udcicr1=0x%08x\n",
+		   udc_readl(udc, UDCICR0), udc_readl(udc, UDCICR1));
+	seq_printf(s, "udcisr0=0x%08x udcisr1=0x%08x\n",
+		   udc_readl(udc, UDCISR0), udc_readl(udc, UDCISR1));
+	seq_printf(s, "udcfnr=%d\n", udc_readl(udc, UDCFNR));
+	seq_printf(s, "irqs: reset=%lu, suspend=%lu, resume=%lu, reconfig=%lu\n",
+		   udc->stats.irqs_reset, udc->stats.irqs_suspend,
+		   udc->stats.irqs_resume, udc->stats.irqs_reconfig);
+
+	return 0;
 }
 
 static int queues_dbg_show(struct seq_file *s, void *p)
@@ -144,75 +140,67 @@ static int queues_dbg_show(struct seq_file *s, void *p)
 	struct pxa_udc *udc = s->private;
 	struct pxa_ep *ep;
 	struct pxa27x_request *req;
-	int pos = 0, i, maxpkt, ret;
+	int i, maxpkt;
 
-	ret = -ENODEV;
 	if (!udc->driver)
-		goto out;
+		return -ENODEV;
 
 	/* dump endpoint queues */
 	for (i = 0; i < NR_PXA_ENDPOINTS; i++) {
 		ep = &udc->pxa_ep[i];
 		maxpkt = ep->fifo_size;
-		pos += seq_printf(s,  "%-12s max_pkt=%d %s\n",
-				EPNAME(ep), maxpkt, "pio");
+		seq_printf(s,  "%-12s max_pkt=%d %s\n",
+			   EPNAME(ep), maxpkt, "pio");
 
 		if (list_empty(&ep->queue)) {
-			pos += seq_printf(s, "\t(nothing queued)\n");
+			seq_puts(s, "\t(nothing queued)\n");
 			continue;
 		}
 
 		list_for_each_entry(req, &ep->queue, queue) {
-			pos += seq_printf(s,  "\treq %p len %d/%d buf %p\n",
-					&req->req, req->req.actual,
-					req->req.length, req->req.buf);
+			seq_printf(s,  "\treq %p len %d/%d buf %p\n",
+				   &req->req, req->req.actual,
+				   req->req.length, req->req.buf);
 		}
 	}
 
-	ret = 0;
-out:
-	return ret;
+	return 0;
 }
 
 static int eps_dbg_show(struct seq_file *s, void *p)
 {
 	struct pxa_udc *udc = s->private;
 	struct pxa_ep *ep;
-	int pos = 0, i, ret;
+	int i;
 	u32 tmp;
 
-	ret = -ENODEV;
 	if (!udc->driver)
-		goto out;
+		return -ENODEV;
 
 	ep = &udc->pxa_ep[0];
 	tmp = udc_ep_readl(ep, UDCCSR);
-	pos += seq_printf(s, "udccsr0=0x%03x(%s%s%s%s%s%s%s)\n", tmp,
-			 (tmp & UDCCSR0_SA) ? " sa" : "",
-			 (tmp & UDCCSR0_RNE) ? " rne" : "",
-			 (tmp & UDCCSR0_FST) ? " fst" : "",
-			 (tmp & UDCCSR0_SST) ? " sst" : "",
-			 (tmp & UDCCSR0_DME) ? " dme" : "",
-			 (tmp & UDCCSR0_IPR) ? " ipr" : "",
-			 (tmp & UDCCSR0_OPC) ? " opc" : "");
+	seq_printf(s, "udccsr0=0x%03x(%s%s%s%s%s%s%s)\n",
+		   tmp,
+		   (tmp & UDCCSR0_SA) ? " sa" : "",
+		   (tmp & UDCCSR0_RNE) ? " rne" : "",
+		   (tmp & UDCCSR0_FST) ? " fst" : "",
+		   (tmp & UDCCSR0_SST) ? " sst" : "",
+		   (tmp & UDCCSR0_DME) ? " dme" : "",
+		   (tmp & UDCCSR0_IPR) ? " ipr" : "",
+		   (tmp & UDCCSR0_OPC) ? " opc" : "");
 	for (i = 0; i < NR_PXA_ENDPOINTS; i++) {
 		ep = &udc->pxa_ep[i];
 		tmp = i? udc_ep_readl(ep, UDCCR) : udc_readl(udc, UDCCR);
-		pos += seq_printf(s, "%-12s: "
-				"IN %lu(%lu reqs), OUT %lu(%lu reqs), "
-				"irqs=%lu, udccr=0x%08x, udccsr=0x%03x, "
-				"udcbcr=%d\n",
-				EPNAME(ep),
-				ep->stats.in_bytes, ep->stats.in_ops,
-				ep->stats.out_bytes, ep->stats.out_ops,
-				ep->stats.irqs,
-				tmp, udc_ep_readl(ep, UDCCSR),
-				udc_ep_readl(ep, UDCBCR));
+		seq_printf(s, "%-12s: IN %lu(%lu reqs), OUT %lu(%lu reqs), irqs=%lu, udccr=0x%08x, udccsr=0x%03x, udcbcr=%d\n",
+			   EPNAME(ep),
+			   ep->stats.in_bytes, ep->stats.in_ops,
+			   ep->stats.out_bytes, ep->stats.out_ops,
+			   ep->stats.irqs,
+			   tmp, udc_ep_readl(ep, UDCCSR),
+			   udc_ep_readl(ep, UDCBCR));
 	}
 
-	ret = 0;
-out:
-	return ret;
+	return 0;
 }
 
 static int eps_dbg_open(struct inode *inode, struct file *file)
-- 
cgit v1.2.3-59-g8ed1b


From adf9c3c85615f41c08559086e0d9ecdc6cc9db71 Mon Sep 17 00:00:00 2001
From: Joseph Kogut <joseph.kogut@gmail.com>
Date: Mon, 16 Feb 2015 19:32:46 -0700
Subject: usb: move definition of PCI_VENDOR_ID_SYNOPSYS to linux/pci_ids.h

Removed FIXME from usb/dwc3/dwc3-pci.c by moving definition of
PCI_VENDOR_ID_SYNOPSYS shared with usb/dwc2 to linux/pci_ids.h.

Signed-off-by: Joseph Kogut <joseph.kogut@gmail.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
---
 drivers/usb/dwc2/pci.c      | 1 -
 drivers/usb/dwc3/dwc3-pci.c | 2 --
 include/linux/pci_ids.h     | 2 ++
 3 files changed, 2 insertions(+), 3 deletions(-)

(limited to 'drivers/usb')

diff --git a/drivers/usb/dwc2/pci.c b/drivers/usb/dwc2/pci.c
index a4e724b0a62e..6646adb1fb17 100644
--- a/drivers/usb/dwc2/pci.c
+++ b/drivers/usb/dwc2/pci.c
@@ -54,7 +54,6 @@
 #include "core.h"
 #include "hcd.h"
 
-#define PCI_VENDOR_ID_SYNOPSYS		0x16c3
 #define PCI_PRODUCT_ID_HAPS_HSOTG	0xabc0
 
 static const char dwc2_driver_name[] = "dwc2";
diff --git a/drivers/usb/dwc3/dwc3-pci.c b/drivers/usb/dwc3/dwc3-pci.c
index 8d950569d557..b773fb53d6a7 100644
--- a/drivers/usb/dwc3/dwc3-pci.c
+++ b/drivers/usb/dwc3/dwc3-pci.c
@@ -24,8 +24,6 @@
 
 #include "platform_data.h"
 
-/* FIXME define these in <linux/pci_ids.h> */
-#define PCI_VENDOR_ID_SYNOPSYS		0x16c3
 #define PCI_DEVICE_ID_SYNOPSYS_HAPSUSB3	0xabcd
 #define PCI_DEVICE_ID_INTEL_BYT		0x0f37
 #define PCI_DEVICE_ID_INTEL_MRFLD	0x119e
diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h
index e63c02a93f6b..38cff8f6716d 100644
--- a/include/linux/pci_ids.h
+++ b/include/linux/pci_ids.h
@@ -2315,6 +2315,8 @@
 #define PCI_VENDOR_ID_CENATEK		0x16CA
 #define PCI_DEVICE_ID_CENATEK_IDE	0x0001
 
+#define PCI_VENDOR_ID_SYNOPSYS		0x16c3
+
 #define PCI_VENDOR_ID_VITESSE		0x1725
 #define PCI_DEVICE_ID_VITESSE_VSC7174	0x7174
 
-- 
cgit v1.2.3-59-g8ed1b


From ab7580c1479f9cc9d6a70a5184687a4d807fc612 Mon Sep 17 00:00:00 2001
From: Sudeep Holla <sudeep.holla@arm.com>
Date: Thu, 26 Feb 2015 11:47:57 +0000
Subject: usb: isp1760: add peripheral/device controller chip id

As per the SAF1761 data sheet[0], the DcChipID register represents
the hardware version number (0001h) and the chip ID (1582h) for the
Peripheral Controller.

However as per the ISP1761 data sheet[1], the DcChipID register
represents the hardware version number (0015h) and the chip ID (8210h)
for the Peripheral Controller.

This patch adds support for both the chip ID values.

[0] http://www.nxp.com/documents/data_sheet/SAF1761.pdf
[1] http://pdf.datasheetcatalog.com/datasheets2/74/742102_1.pdf

Cc: Felipe Balbi <balbi@ti.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
---
 drivers/usb/isp1760/isp1760-udc.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/usb')

diff --git a/drivers/usb/isp1760/isp1760-udc.c b/drivers/usb/isp1760/isp1760-udc.c
index 9612d7990565..6d618b3fab07 100644
--- a/drivers/usb/isp1760/isp1760-udc.c
+++ b/drivers/usb/isp1760/isp1760-udc.c
@@ -1411,7 +1411,7 @@ static int isp1760_udc_init(struct isp1760_udc *udc)
 		return -ENODEV;
 	}
 
-	if (chipid != 0x00011582) {
+	if (chipid != 0x00011582 && chipid != 0x00158210) {
 		dev_err(udc->isp->dev, "udc: invalid chip ID 0x%08x\n", chipid);
 		return -ENODEV;
 	}
-- 
cgit v1.2.3-59-g8ed1b


From 896f7ea37f53666a72080d0958213d12ae59deaa Mon Sep 17 00:00:00 2001
From: Felipe Balbi <balbi@ti.com>
Date: Wed, 25 Feb 2015 14:03:23 -0600
Subject: usb: musb: core: remove unnecessary logical comparison

devctl & MUSB_DEVCTL_HM represents a single bit,
just check for the bit, there's really no need
to compare the result against 0.

Tested-by: Bin Liu <b-liu@ti.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
---
 drivers/usb/musb/musb_core.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/usb')

diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c
index e59ae7395ba8..8066dbab1045 100644
--- a/drivers/usb/musb/musb_core.c
+++ b/drivers/usb/musb/musb_core.c
@@ -879,7 +879,7 @@ b_host:
 	 */
 	if (int_usb & MUSB_INTR_RESET) {
 		handled = IRQ_HANDLED;
-		if ((devctl & MUSB_DEVCTL_HM) != 0) {
+		if (devctl & MUSB_DEVCTL_HM) {
 			/*
 			 * Looks like non-HS BABBLE can be ignored, but
 			 * HS BABBLE is an error condition. For HS the solution
-- 
cgit v1.2.3-59-g8ed1b


From d57a27711939dcb289b3d17ac48fca99f0fd245d Mon Sep 17 00:00:00 2001
From: Felipe Balbi <balbi@ti.com>
Date: Wed, 25 Feb 2015 14:05:15 -0600
Subject: usb: musb: core: add missing curly braces

no functional changes, clean up only.

Tested-by: Bin Liu <b-liu@ti.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
---
 drivers/usb/musb/musb_core.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'drivers/usb')

diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c
index 8066dbab1045..21ab26636631 100644
--- a/drivers/usb/musb/musb_core.c
+++ b/drivers/usb/musb/musb_core.c
@@ -887,9 +887,9 @@ b_host:
 			 * caused BABBLE. When HS BABBLE happens we can only
 			 * stop the session.
 			 */
-			if (devctl & (MUSB_DEVCTL_FSDEV | MUSB_DEVCTL_LSDEV))
+			if (devctl & (MUSB_DEVCTL_FSDEV | MUSB_DEVCTL_LSDEV)) {
 				dev_dbg(musb->controller, "BABBLE devctl: %02x\n", devctl);
-			else {
+			} else {
 				ERR("Stopping host session -- babble\n");
 				musb_writeb(musb->mregs, MUSB_DEVCTL, 0);
 			}
-- 
cgit v1.2.3-59-g8ed1b


From 28378d5ed5ca1221479d2f94c3b346691834822f Mon Sep 17 00:00:00 2001
From: Felipe Balbi <balbi@ti.com>
Date: Thu, 26 Feb 2015 10:54:27 -0600
Subject: usb: musb: core: fix highspeed check

FSDEV is set for both HIGH and FULL speeds,
the correct HIGHSPEED check is done through
power register's HSMODE bit.

Tested-by: Bin Liu <b-liu@ti.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
---
 drivers/usb/musb/musb_core.c | 21 ++++++++++++++-------
 1 file changed, 14 insertions(+), 7 deletions(-)

(limited to 'drivers/usb')

diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c
index 21ab26636631..cf7b10e5963e 100644
--- a/drivers/usb/musb/musb_core.c
+++ b/drivers/usb/musb/musb_core.c
@@ -880,16 +880,23 @@ b_host:
 	if (int_usb & MUSB_INTR_RESET) {
 		handled = IRQ_HANDLED;
 		if (devctl & MUSB_DEVCTL_HM) {
+			u8 power = musb_readl(musb->mregs, MUSB_POWER);
+
 			/*
 			 * Looks like non-HS BABBLE can be ignored, but
-			 * HS BABBLE is an error condition. For HS the solution
-			 * is to avoid babble in the first place and fix what
-			 * caused BABBLE. When HS BABBLE happens we can only
-			 * stop the session.
+			 * HS BABBLE is an error condition.
+			 *
+			 * For HS the solution is to avoid babble in the first
+			 * place and fix what caused BABBLE.
+			 *
+			 * When HS BABBLE happens what we can depends on which
+			 * platform MUSB is running, because some platforms
+			 * implemented proprietary means for 'recovering' from
+			 * Babble conditions. One such platform is AM335x. In
+			 * most cases, however, the only thing we can do is drop
+			 * the session.
 			 */
-			if (devctl & (MUSB_DEVCTL_FSDEV | MUSB_DEVCTL_LSDEV)) {
-				dev_dbg(musb->controller, "BABBLE devctl: %02x\n", devctl);
-			} else {
+			if (power & MUSB_POWER_HSMODE) {
 				ERR("Stopping host session -- babble\n");
 				musb_writeb(musb->mregs, MUSB_DEVCTL, 0);
 			}
-- 
cgit v1.2.3-59-g8ed1b


From d0cddae7926f39e8fd488f62496cfebf7a5e757d Mon Sep 17 00:00:00 2001
From: Felipe Balbi <balbi@ti.com>
Date: Thu, 26 Feb 2015 10:55:13 -0600
Subject: usb: musb: dsps: return error code if reset fails

if reset fails, we should return a *negative*
error code, not a positive value.

Tested-by: Bin Liu <b-liu@ti.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
---
 drivers/usb/musb/musb_dsps.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/usb')

diff --git a/drivers/usb/musb/musb_dsps.c b/drivers/usb/musb/musb_dsps.c
index a900c9877195..af614f49cd98 100644
--- a/drivers/usb/musb/musb_dsps.c
+++ b/drivers/usb/musb/musb_dsps.c
@@ -652,7 +652,7 @@ static int dsps_musb_reset(struct musb *musb)
 		session_restart = 1;
 	}
 
-	return !session_restart;
+	return session_restart ? 0 : -EPIPE;
 }
 
 static struct musb_platform_ops dsps_ops = {
-- 
cgit v1.2.3-59-g8ed1b


From d0fc0a20b5b7babe0fe1552204bd52505a4f93dd Mon Sep 17 00:00:00 2001
From: Felipe Balbi <balbi@ti.com>
Date: Wed, 25 Feb 2015 14:07:52 -0600
Subject: usb: musb: core: move babble recovery inside babble check

There was already a proper place where we were
checking for babble interrupts, move babble
recovery there.

Tested-by: Bin Liu <b-liu@ti.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
---
 drivers/usb/musb/musb_core.c | 13 ++++++-------
 1 file changed, 6 insertions(+), 7 deletions(-)

(limited to 'drivers/usb')

diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c
index cf7b10e5963e..9ea02d4cc2c2 100644
--- a/drivers/usb/musb/musb_core.c
+++ b/drivers/usb/musb/musb_core.c
@@ -899,6 +899,12 @@ b_host:
 			if (power & MUSB_POWER_HSMODE) {
 				ERR("Stopping host session -- babble\n");
 				musb_writeb(musb->mregs, MUSB_DEVCTL, 0);
+
+				if (is_host_active(musb)) {
+					musb_generic_disable(musb);
+					schedule_delayed_work(&musb->recover_work,
+							msecs_to_jiffies(100));
+				}
 			}
 		} else {
 			dev_dbg(musb->controller, "BUS RESET as %s\n",
@@ -938,13 +944,6 @@ b_host:
 		}
 	}
 
-	/* handle babble condition */
-	if (int_usb & MUSB_INTR_BABBLE && is_host_active(musb)) {
-		musb_generic_disable(musb);
-		schedule_delayed_work(&musb->recover_work,
-				      msecs_to_jiffies(100));
-	}
-
 #if 0
 /* REVISIT ... this would be for multiplexing periodic endpoints, or
  * supporting transfer phasing to prevent exceeding ISO bandwidth
-- 
cgit v1.2.3-59-g8ed1b


From 0acff6b83106ef699f17828caea6545bcc716f14 Mon Sep 17 00:00:00 2001
From: Felipe Balbi <balbi@ti.com>
Date: Wed, 25 Feb 2015 14:14:15 -0600
Subject: usb: musb: core: break long line

no functional changes, clean up only.

Tested-by: Bin Liu <b-liu@ti.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
---
 drivers/usb/musb/musb_core.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

(limited to 'drivers/usb')

diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c
index 9ea02d4cc2c2..b5dfe83dce76 100644
--- a/drivers/usb/musb/musb_core.c
+++ b/drivers/usb/musb/musb_core.c
@@ -534,7 +534,8 @@ static irqreturn_t musb_stage0_irq(struct musb *musb, u8 int_usb,
 	 */
 	if (int_usb & MUSB_INTR_RESUME) {
 		handled = IRQ_HANDLED;
-		dev_dbg(musb->controller, "RESUME (%s)\n", usb_otg_state_string(musb->xceiv->otg->state));
+		dev_dbg(musb->controller, "RESUME (%s)\n",
+				usb_otg_state_string(musb->xceiv->otg->state));
 
 		if (devctl & MUSB_DEVCTL_HM) {
 			void __iomem *mbase = musb->mregs;
-- 
cgit v1.2.3-59-g8ed1b


From 46571889ec435f1bf29d9094f062948b26630723 Mon Sep 17 00:00:00 2001
From: Felipe Balbi <balbi@ti.com>
Date: Wed, 25 Feb 2015 14:30:55 -0600
Subject: usb: musb: core: remove unnecessary reg access from resume IRQ

when musb is operating as host and a remote wakeup
fires up, a resume interrupt will be raised. At that
point SUSPENDM bit is automatically cleared and
RESUME bit is automatically set.

Remove those two from IRQ handler.

Tested-by: Bin Liu <b-liu@ti.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
---
 drivers/usb/musb/musb_core.c | 15 ---------------
 1 file changed, 15 deletions(-)

(limited to 'drivers/usb')

diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c
index b5dfe83dce76..3fb7d6e032f1 100644
--- a/drivers/usb/musb/musb_core.c
+++ b/drivers/usb/musb/musb_core.c
@@ -538,27 +538,12 @@ static irqreturn_t musb_stage0_irq(struct musb *musb, u8 int_usb,
 				usb_otg_state_string(musb->xceiv->otg->state));
 
 		if (devctl & MUSB_DEVCTL_HM) {
-			void __iomem *mbase = musb->mregs;
-			u8 power;
-
 			switch (musb->xceiv->otg->state) {
 			case OTG_STATE_A_SUSPEND:
 				/* remote wakeup?  later, GetPortStatus
 				 * will stop RESUME signaling
 				 */
 
-				power = musb_readb(musb->mregs, MUSB_POWER);
-				if (power & MUSB_POWER_SUSPENDM) {
-					/* spurious */
-					musb->int_usb &= ~MUSB_INTR_SUSPEND;
-					dev_dbg(musb->controller, "Spurious SUSPENDM\n");
-					break;
-				}
-
-				power &= ~MUSB_POWER_SUSPENDM;
-				musb_writeb(mbase, MUSB_POWER,
-						power | MUSB_POWER_RESUME);
-
 				musb->port1_status |=
 						(USB_PORT_STAT_C_SUSPEND << 16)
 						| MUSB_PORT_STAT_RESUME;
-- 
cgit v1.2.3-59-g8ed1b


From b2c7361bd07f94e6280507a20e0541870d5d7a1a Mon Sep 17 00:00:00 2001
From: Felipe Balbi <balbi@ti.com>
Date: Wed, 25 Feb 2015 14:48:50 -0600
Subject: usb: musb: core: there is no connect interrupt in peripheral mode

MUSB does not generate a connect IRQ when working
in peripheral mode.

Tested-by: Bin Liu <b-liu@ti.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
---
 drivers/usb/musb/musb_core.c | 4 ----
 1 file changed, 4 deletions(-)

(limited to 'drivers/usb')

diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c
index 3fb7d6e032f1..7ac69799a1db 100644
--- a/drivers/usb/musb/musb_core.c
+++ b/drivers/usb/musb/musb_core.c
@@ -761,10 +761,6 @@ static irqreturn_t musb_stage0_irq(struct musb *musb, u8 int_usb,
 
 		musb->ep0_stage = MUSB_EP0_START;
 
-		/* flush endpoints when transitioning from Device Mode */
-		if (is_peripheral_active(musb)) {
-			/* REVISIT HNP; just force disconnect */
-		}
 		musb->intrtxe = musb->epmask;
 		musb_writew(musb->mregs, MUSB_INTRTXE, musb->intrtxe);
 		musb->intrrxe = musb->epmask & 0xfffe;
-- 
cgit v1.2.3-59-g8ed1b


From 52b9e6eb07f739207bd7d4257fdfbb24592d096a Mon Sep 17 00:00:00 2001
From: Felipe Balbi <balbi@ti.com>
Date: Wed, 25 Feb 2015 16:04:39 -0600
Subject: usb: musb: dsps: remove babble check from dsps irq handler

musb->int_usb already contains the correct
information for musb-core to handle babble.

In fact, this very check was just causing a
nonsensical babble interrupt storm.

With this I can get test.sh to run and, even though
all tests fail with timeout, that's still better
than locking up the system due to IRQ storm.

Also, if I remove g_zero and load g_mass_storage,
then everything works fine again.

Tested-by: Bin Liu <b-liu@ti.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
---
 drivers/usb/musb/musb_core.c |  2 +-
 drivers/usb/musb/musb_dsps.c | 22 ----------------------
 2 files changed, 1 insertion(+), 23 deletions(-)

(limited to 'drivers/usb')

diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c
index 7ac69799a1db..d7730c7e7938 100644
--- a/drivers/usb/musb/musb_core.c
+++ b/drivers/usb/musb/musb_core.c
@@ -879,7 +879,7 @@ b_host:
 			 * the session.
 			 */
 			if (power & MUSB_POWER_HSMODE) {
-				ERR("Stopping host session -- babble\n");
+				dev_err(musb->controller, "Babble\n");
 				musb_writeb(musb->mregs, MUSB_DEVCTL, 0);
 
 				if (is_host_active(musb)) {
diff --git a/drivers/usb/musb/musb_dsps.c b/drivers/usb/musb/musb_dsps.c
index af614f49cd98..8f96e79dd069 100644
--- a/drivers/usb/musb/musb_dsps.c
+++ b/drivers/usb/musb/musb_dsps.c
@@ -330,28 +330,6 @@ static irqreturn_t dsps_interrupt(int irq, void *hci)
 
 	dev_dbg(musb->controller, "usbintr (%x) epintr(%x)\n",
 			usbintr, epintr);
-	/*
-	 * DRVVBUS IRQs are the only proxy we have (a very poor one!) for
-	 * DSPS IP's missing ID change IRQ.  We need an ID change IRQ to
-	 * switch appropriately between halves of the OTG state machine.
-	 * Managing DEVCTL.SESSION per Mentor docs requires that we know its
-	 * value but DEVCTL.BDEVICE is invalid without DEVCTL.SESSION set.
-	 * Also, DRVVBUS pulses for SRP (but not at 5V) ...
-	 */
-	if (is_host_active(musb) && usbintr & MUSB_INTR_BABBLE) {
-		pr_info("CAUTION: musb: Babble Interrupt Occurred\n");
-
-		/*
-		 * When a babble condition occurs, the musb controller removes
-		 * the session and is no longer in host mode. Hence, all
-		 * devices connected to its root hub get disconnected.
-		 *
-		 * Hand this error down to the musb core isr, so it can
-		 * recover.
-		 */
-		musb->int_usb = MUSB_INTR_BABBLE | MUSB_INTR_DISCONNECT;
-		musb->int_tx = musb->int_rx = 0;
-	}
 
 	if (usbintr & ((1 << wrp->drvvbus) << wrp->usb_shift)) {
 		int drvvbus = dsps_readl(reg_base, wrp->status);
-- 
cgit v1.2.3-59-g8ed1b


From f860f0b1ea76b9f15d24db8fa98823eb15273afb Mon Sep 17 00:00:00 2001
From: Felipe Balbi <balbi@ti.com>
Date: Thu, 26 Feb 2015 11:01:03 -0600
Subject: usb: musb: dsps: check for the single bit

We want to check if that particular bit is
set. It could very well be that bootloader
(or romcode) has fiddled with MUSB before
us which could leave other bits set in this
register.

Tested-by: Bin Liu <b-liu@ti.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
---
 drivers/usb/musb/musb_dsps.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/usb')

diff --git a/drivers/usb/musb/musb_dsps.c b/drivers/usb/musb/musb_dsps.c
index 8f96e79dd069..e210b75fb6f2 100644
--- a/drivers/usb/musb/musb_dsps.c
+++ b/drivers/usb/musb/musb_dsps.c
@@ -475,7 +475,7 @@ static int dsps_musb_init(struct musb *musb)
 	 * logic enabled.
 	 */
 	val = dsps_readb(musb->mregs, MUSB_BABBLE_CTL);
-	if (val == MUSB_BABBLE_RCV_DISABLE) {
+	if (val & MUSB_BABBLE_RCV_DISABLE) {
 		glue->sw_babble_enabled = true;
 		val |= MUSB_BABBLE_SW_SESSION_CTRL;
 		dsps_writeb(musb->mregs, MUSB_BABBLE_CTL, val);
-- 
cgit v1.2.3-59-g8ed1b


From a67cab72b87c7bb970bec8bc060a8946c5dfa1c5 Mon Sep 17 00:00:00 2001
From: Felipe Balbi <balbi@ti.com>
Date: Thu, 26 Feb 2015 11:09:20 -0600
Subject: usb: musb: core: controller drops session automatically

Whenever babble happens, MUSB controller will
drop session automatically.

The only case where it won't drop the session,
is when we're running on AM335x and SW_SESSION_CTRL
bit has been set. In that case, controller will
not touch session bit so SW has a chance to recover
from babble condition.

Tested-by: Bin Liu <b-liu@ti.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
---
 drivers/usb/musb/musb_core.c | 1 -
 1 file changed, 1 deletion(-)

(limited to 'drivers/usb')

diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c
index d7730c7e7938..b86e975cba2b 100644
--- a/drivers/usb/musb/musb_core.c
+++ b/drivers/usb/musb/musb_core.c
@@ -880,7 +880,6 @@ b_host:
 			 */
 			if (power & MUSB_POWER_HSMODE) {
 				dev_err(musb->controller, "Babble\n");
-				musb_writeb(musb->mregs, MUSB_DEVCTL, 0);
 
 				if (is_host_active(musb)) {
 					musb_generic_disable(musb);
-- 
cgit v1.2.3-59-g8ed1b


From 3709ffca6485bd1b03b1fe2d9eb384dcf5db87a6 Mon Sep 17 00:00:00 2001
From: Felipe Balbi <balbi@ti.com>
Date: Thu, 26 Feb 2015 11:11:33 -0600
Subject: usb: musb: dsps: add dsps_ prefix to sw_babble_control

this makes it easier to filter function traces.
No functional changes.

Tested-by: Bin Liu <b-liu@ti.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
---
 drivers/usb/musb/musb_dsps.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'drivers/usb')

diff --git a/drivers/usb/musb/musb_dsps.c b/drivers/usb/musb/musb_dsps.c
index e210b75fb6f2..85ebfa2c3858 100644
--- a/drivers/usb/musb/musb_dsps.c
+++ b/drivers/usb/musb/musb_dsps.c
@@ -549,7 +549,7 @@ static int dsps_musb_set_mode(struct musb *musb, u8 mode)
 	return 0;
 }
 
-static bool  sw_babble_control(struct musb *musb)
+static bool dsps_sw_babble_control(struct musb *musb)
 {
 	u8 babble_ctl;
 	bool session_restart =  false;
@@ -608,7 +608,7 @@ static int dsps_musb_reset(struct musb *musb)
 	int session_restart = 0, error;
 
 	if (glue->sw_babble_enabled)
-		session_restart = sw_babble_control(musb);
+		session_restart = dsps_sw_babble_control(musb);
 	/*
 	 * In case of new silicon version babble condition can be recovered
 	 * without resetting the MUSB. But for older silicon versions, MUSB
-- 
cgit v1.2.3-59-g8ed1b


From e1eb3eb8b02c5be35ea1fedccc6c9c6d2c9b0165 Mon Sep 17 00:00:00 2001
From: Felipe Balbi <balbi@ti.com>
Date: Thu, 26 Feb 2015 11:26:09 -0600
Subject: usb: musb: core: refactor IRQ enable/disable to separate functions

sometimes we want to just mask/unmask interrupts
without touching devctl register. For those
cases, let's introduce musb_enable_interrupts and
musb_disable_interrupts()

Tested-by: Bin Liu <b-liu@ti.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
---
 drivers/usb/musb/musb_core.c | 37 ++++++++++++++++++++++++++-----------
 1 file changed, 26 insertions(+), 11 deletions(-)

(limited to 'drivers/usb')

diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c
index b86e975cba2b..8ae24266f1a8 100644
--- a/drivers/usb/musb/musb_core.c
+++ b/drivers/usb/musb/musb_core.c
@@ -507,7 +507,9 @@ void musb_hnp_stop(struct musb *musb)
 	musb->port1_status &= ~(USB_PORT_STAT_C_CONNECTION << 16);
 }
 
+static void musb_disable_interrupts(struct musb *musb);
 static void musb_generic_disable(struct musb *musb);
+
 /*
  * Interrupt Service Routine to record USB "global" interrupts.
  * Since these do not happen often and signify things of
@@ -977,7 +979,7 @@ b_host:
 
 /*-------------------------------------------------------------------------*/
 
-static void musb_generic_disable(struct musb *musb)
+static void musb_disable_interrupts(struct musb *musb)
 {
 	void __iomem	*mbase = musb->mregs;
 	u16	temp;
@@ -989,16 +991,35 @@ static void musb_generic_disable(struct musb *musb)
 	musb->intrrxe = 0;
 	musb_writew(mbase, MUSB_INTRRXE, 0);
 
-	/* off */
-	musb_writeb(mbase, MUSB_DEVCTL, 0);
-
 	/*  flush pending interrupts */
 	temp = musb_readb(mbase, MUSB_INTRUSB);
 	temp = musb_readw(mbase, MUSB_INTRTX);
 	temp = musb_readw(mbase, MUSB_INTRRX);
+}
+
+static void musb_enable_interrupts(struct musb *musb)
+{
+	void __iomem    *regs = musb->mregs;
+
+	/*  Set INT enable registers, enable interrupts */
+	musb->intrtxe = musb->epmask;
+	musb_writew(regs, MUSB_INTRTXE, musb->intrtxe);
+	musb->intrrxe = musb->epmask & 0xfffe;
+	musb_writew(regs, MUSB_INTRRXE, musb->intrrxe);
+	musb_writeb(regs, MUSB_INTRUSBE, 0xf7);
 
 }
 
+static void musb_generic_disable(struct musb *musb)
+{
+	void __iomem	*mbase = musb->mregs;
+
+	musb_disable_interrupts(musb);
+
+	/* off */
+	musb_writeb(mbase, MUSB_DEVCTL, 0);
+}
+
 /*
  * Program the HDRC to start (enable interrupts, dma, etc.).
  */
@@ -1009,13 +1030,7 @@ void musb_start(struct musb *musb)
 
 	dev_dbg(musb->controller, "<== devctl %02x\n", devctl);
 
-	/*  Set INT enable registers, enable interrupts */
-	musb->intrtxe = musb->epmask;
-	musb_writew(regs, MUSB_INTRTXE, musb->intrtxe);
-	musb->intrrxe = musb->epmask & 0xfffe;
-	musb_writew(regs, MUSB_INTRRXE, musb->intrrxe);
-	musb_writeb(regs, MUSB_INTRUSBE, 0xf7);
-
+	musb_enable_interrupts(musb);
 	musb_writeb(regs, MUSB_TESTMODE, 0);
 
 	/* put into basic highspeed mode and start session */
-- 
cgit v1.2.3-59-g8ed1b


From ba7ee8bb313c4a55066c4da30292aeb9abac82d8 Mon Sep 17 00:00:00 2001
From: Felipe Balbi <balbi@ti.com>
Date: Thu, 26 Feb 2015 11:31:49 -0600
Subject: usb: musb: don't touch devctl from babble recovery

We do *not* want to touch devctl at all when
trying to recover from babble. All we want to
do is mask IRQs until we're done without our
babble recovery, at which point we will unmask
IRQs.

Tested-by: Bin Liu <b-liu@ti.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
---
 drivers/usb/musb/musb_core.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

(limited to 'drivers/usb')

diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c
index 8ae24266f1a8..a4e524cb8416 100644
--- a/drivers/usb/musb/musb_core.c
+++ b/drivers/usb/musb/musb_core.c
@@ -884,7 +884,7 @@ b_host:
 				dev_err(musb->controller, "Babble\n");
 
 				if (is_host_active(musb)) {
-					musb_generic_disable(musb);
+					musb_disable_interrupts(musb);
 					schedule_delayed_work(&musb->recover_work,
 							msecs_to_jiffies(100));
 				}
@@ -1838,8 +1838,10 @@ static void musb_recover_work(struct work_struct *data)
 	int status, ret;
 
 	ret  = musb_platform_reset(musb);
-	if (ret)
+	if (ret) {
+		musb_enable_interrupts(musb);
 		return;
+	}
 
 	usb_phy_vbus_off(musb->xceiv);
 	usleep_range(100, 200);
-- 
cgit v1.2.3-59-g8ed1b


From d5fa3e9f7398adf337f03fa3257d5e9b214078ee Mon Sep 17 00:00:00 2001
From: Felipe Balbi <balbi@ti.com>
Date: Thu, 26 Feb 2015 11:35:13 -0600
Subject: usb: musb: core: decrease delayed_work time

When babble IRQ happens, we need to wait only
5.3us (320 cycles of 60MHz clock), we will give
it some slack and schedule our work a 10 usecs into
the future.

Tested-by: Bin Liu <b-liu@ti.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
---
 drivers/usb/musb/musb_core.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/usb')

diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c
index a4e524cb8416..96d71fa2ae85 100644
--- a/drivers/usb/musb/musb_core.c
+++ b/drivers/usb/musb/musb_core.c
@@ -886,7 +886,7 @@ b_host:
 				if (is_host_active(musb)) {
 					musb_disable_interrupts(musb);
 					schedule_delayed_work(&musb->recover_work,
-							msecs_to_jiffies(100));
+							usecs_to_jiffies(10));
 				}
 			}
 		} else {
-- 
cgit v1.2.3-59-g8ed1b


From 011d0dd5400b84e593eecfc4a17fcfb6c0c5ac60 Mon Sep 17 00:00:00 2001
From: Felipe Balbi <balbi@ti.com>
Date: Thu, 26 Feb 2015 14:00:52 -0600
Subject: usb: musb: dsps: do not reset musb on babble

All we have to do is, really, drop session bit
and let the session restart.

Big thanks goes to Bin Liu <b-liu@ti.com> for
inspiring this work.

Tested-by: Bin Liu <b-liu@ti.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
---
 drivers/usb/musb/musb_dsps.c | 23 ++---------------------
 1 file changed, 2 insertions(+), 21 deletions(-)

(limited to 'drivers/usb')

diff --git a/drivers/usb/musb/musb_dsps.c b/drivers/usb/musb/musb_dsps.c
index 85ebfa2c3858..a159de1225f3 100644
--- a/drivers/usb/musb/musb_dsps.c
+++ b/drivers/usb/musb/musb_dsps.c
@@ -604,31 +604,12 @@ static int dsps_musb_reset(struct musb *musb)
 {
 	struct device *dev = musb->controller;
 	struct dsps_glue *glue = dev_get_drvdata(dev->parent);
-	const struct dsps_musb_wrapper *wrp = glue->wrp;
-	int session_restart = 0, error;
+	int session_restart = 0;
 
 	if (glue->sw_babble_enabled)
 		session_restart = dsps_sw_babble_control(musb);
-	/*
-	 * In case of new silicon version babble condition can be recovered
-	 * without resetting the MUSB. But for older silicon versions, MUSB
-	 * reset is needed
-	 */
-	if (session_restart || !glue->sw_babble_enabled) {
-		dev_info(musb->controller, "Restarting MUSB to recover from Babble\n");
-		dsps_writel(musb->ctrl_base, wrp->control, (1 << wrp->reset));
-		usleep_range(100, 200);
-		usb_phy_shutdown(musb->xceiv);
-		error = phy_power_off(musb->phy);
-		if (error)
-			dev_err(dev, "phy shutdown failed: %i\n", error);
-		usleep_range(100, 200);
-		usb_phy_init(musb->xceiv);
-		error = phy_power_on(musb->phy);
-		if (error)
-			dev_err(dev, "phy powerup failed: %i\n", error);
+	else
 		session_restart = 1;
-	}
 
 	return session_restart ? 0 : -EPIPE;
 }
-- 
cgit v1.2.3-59-g8ed1b


From b4dc38fd45b63e3da2bc98db5d283a15a637a2fa Mon Sep 17 00:00:00 2001
From: Felipe Balbi <balbi@ti.com>
Date: Thu, 26 Feb 2015 14:02:35 -0600
Subject: usb: musb: core: simplify musb_recover_work()

we're not resetting musb at all, just restarting
the session. This means we don't need to touch PHYs
or VBUS or anything like that. Just make sure session
bit is reenabled after MUSB dropped it.

while at that, make sure to tell usbcore that we're
dropping the session and, thus, disconnecting the
device.

Tested-by: Bin Liu <b-liu@ti.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
---
 drivers/usb/musb/musb_core.c | 21 ++++++++++++---------
 1 file changed, 12 insertions(+), 9 deletions(-)

(limited to 'drivers/usb')

diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c
index 96d71fa2ae85..979bc2b0550f 100644
--- a/drivers/usb/musb/musb_core.c
+++ b/drivers/usb/musb/musb_core.c
@@ -1835,7 +1835,8 @@ static void musb_irq_work(struct work_struct *data)
 static void musb_recover_work(struct work_struct *data)
 {
 	struct musb *musb = container_of(data, struct musb, recover_work.work);
-	int status, ret;
+	int ret;
+	u8 devctl;
 
 	ret  = musb_platform_reset(musb);
 	if (ret) {
@@ -1843,23 +1844,25 @@ static void musb_recover_work(struct work_struct *data)
 		return;
 	}
 
-	usb_phy_vbus_off(musb->xceiv);
-	usleep_range(100, 200);
+	/* drop session bit */
+	devctl = musb_readb(musb->mregs, MUSB_DEVCTL);
+	devctl &= ~MUSB_DEVCTL_SESSION;
+	musb_writeb(musb->mregs, MUSB_DEVCTL, devctl);
 
-	usb_phy_vbus_on(musb->xceiv);
-	usleep_range(100, 200);
+	/* tell usbcore about it */
+	musb_root_disconnect(musb);
 
 	/*
 	 * When a babble condition occurs, the musb controller
 	 * removes the session bit and the endpoint config is lost.
 	 */
 	if (musb->dyn_fifo)
-		status = ep_config_from_table(musb);
+		ret = ep_config_from_table(musb);
 	else
-		status = ep_config_from_hw(musb);
+		ret = ep_config_from_hw(musb);
 
-	/* start the session again */
-	if (status == 0)
+	/* restart session */
+	if (ret == 0)
 		musb_start(musb);
 }
 
-- 
cgit v1.2.3-59-g8ed1b


From b28a6432405ca95b3da25630d79d2463c754a79c Mon Sep 17 00:00:00 2001
From: Felipe Balbi <balbi@ti.com>
Date: Thu, 26 Feb 2015 14:20:58 -0600
Subject: usb: musb: rename ->reset() to ->recover()

recover is a much better name than reset, considering
we don't really reset the IP, just run platform-specific
babble recovery algorithm.

while at that, also fix a typo in comment and add kdoc
for recover memeber of platform_ops.

Tested-by: Bin Liu <b-liu@ti.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
---
 drivers/usb/musb/musb_core.c |  2 +-
 drivers/usb/musb/musb_core.h | 13 +++++++------
 drivers/usb/musb/musb_dsps.c |  4 ++--
 3 files changed, 10 insertions(+), 9 deletions(-)

(limited to 'drivers/usb')

diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c
index 979bc2b0550f..bf9746287d7c 100644
--- a/drivers/usb/musb/musb_core.c
+++ b/drivers/usb/musb/musb_core.c
@@ -1838,7 +1838,7 @@ static void musb_recover_work(struct work_struct *data)
 	int ret;
 	u8 devctl;
 
-	ret  = musb_platform_reset(musb);
+	ret  = musb_platform_recover(musb);
 	if (ret) {
 		musb_enable_interrupts(musb);
 		return;
diff --git a/drivers/usb/musb/musb_core.h b/drivers/usb/musb/musb_core.h
index 5e65958f7915..1e03c7ec82e4 100644
--- a/drivers/usb/musb/musb_core.h
+++ b/drivers/usb/musb/musb_core.h
@@ -160,7 +160,8 @@ struct musb_io;
  * @init:	turns on clocks, sets up platform-specific registers, etc
  * @exit:	undoes @init
  * @set_mode:	forcefully changes operating mode
- * @try_ilde:	tries to idle the IP
+ * @try_idle:	tries to idle the IP
+ * @recover:	platform-specific babble recovery
  * @vbus_status: returns vbus status if possible
  * @set_vbus:	forces vbus status
  * @adjust_channel_params: pre check for standard dma channel_program func
@@ -196,7 +197,7 @@ struct musb_platform_ops {
 	void	(*write_fifo)(struct musb_hw_ep *hw_ep, u16 len, const u8 *buf);
 	int	(*set_mode)(struct musb *musb, u8 mode);
 	void	(*try_idle)(struct musb *musb, unsigned long timeout);
-	int	(*reset)(struct musb *musb);
+	int	(*recover)(struct musb *musb);
 
 	int	(*vbus_status)(struct musb *musb);
 	void	(*set_vbus)(struct musb *musb, int on);
@@ -558,12 +559,12 @@ static inline void musb_platform_try_idle(struct musb *musb,
 		musb->ops->try_idle(musb, timeout);
 }
 
-static inline int  musb_platform_reset(struct musb *musb)
+static inline int  musb_platform_recover(struct musb *musb)
 {
-	if (!musb->ops->reset)
-		return -EINVAL;
+	if (!musb->ops->recover)
+		return 0;
 
-	return musb->ops->reset(musb);
+	return musb->ops->recover(musb);
 }
 
 static inline int musb_platform_get_vbus_status(struct musb *musb)
diff --git a/drivers/usb/musb/musb_dsps.c b/drivers/usb/musb/musb_dsps.c
index a159de1225f3..30eb6ac29b81 100644
--- a/drivers/usb/musb/musb_dsps.c
+++ b/drivers/usb/musb/musb_dsps.c
@@ -600,7 +600,7 @@ static bool dsps_sw_babble_control(struct musb *musb)
 	return session_restart;
 }
 
-static int dsps_musb_reset(struct musb *musb)
+static int dsps_musb_recover(struct musb *musb)
 {
 	struct device *dev = musb->controller;
 	struct dsps_glue *glue = dev_get_drvdata(dev->parent);
@@ -624,7 +624,7 @@ static struct musb_platform_ops dsps_ops = {
 
 	.try_idle	= dsps_musb_try_idle,
 	.set_mode	= dsps_musb_set_mode,
-	.reset		= dsps_musb_reset,
+	.recover	= dsps_musb_recover,
 };
 
 static u64 musb_dmamask = DMA_BIT_MASK(32);
-- 
cgit v1.2.3-59-g8ed1b


From 83b8f5b8c07c8cbad8c14c7b8767e7219a6c1813 Mon Sep 17 00:00:00 2001
From: Felipe Balbi <balbi@ti.com>
Date: Thu, 26 Feb 2015 14:27:12 -0600
Subject: usb: musb: core: drop recover_work

that's not needed anymore. Everything that we
call is irq-safe, so we might as well not
have a delayed work for babble recovery.

Tested-by: Bin Liu <b-liu@ti.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
---
 drivers/usb/musb/musb_core.c | 17 +++++++++--------
 drivers/usb/musb/musb_core.h |  1 -
 2 files changed, 9 insertions(+), 9 deletions(-)

(limited to 'drivers/usb')

diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c
index bf9746287d7c..b410af6b0510 100644
--- a/drivers/usb/musb/musb_core.c
+++ b/drivers/usb/musb/musb_core.c
@@ -509,6 +509,7 @@ void musb_hnp_stop(struct musb *musb)
 
 static void musb_disable_interrupts(struct musb *musb);
 static void musb_generic_disable(struct musb *musb);
+static void musb_recover_from_babble(struct musb *musb);
 
 /*
  * Interrupt Service Routine to record USB "global" interrupts.
@@ -885,8 +886,7 @@ b_host:
 
 				if (is_host_active(musb)) {
 					musb_disable_interrupts(musb);
-					schedule_delayed_work(&musb->recover_work,
-							usecs_to_jiffies(10));
+					musb_recover_from_babble(musb);
 				}
 			}
 		} else {
@@ -1831,13 +1831,17 @@ static void musb_irq_work(struct work_struct *data)
 	}
 }
 
-/* Recover from babble interrupt conditions */
-static void musb_recover_work(struct work_struct *data)
+static void musb_recover_from_babble(struct musb *musb)
 {
-	struct musb *musb = container_of(data, struct musb, recover_work.work);
 	int ret;
 	u8 devctl;
 
+	/*
+	 * wait at least 320 cycles of 60MHz clock. That's 5.3us, we will give
+	 * it some slack and wait for 10us.
+	 */
+	udelay(10);
+
 	ret  = musb_platform_recover(musb);
 	if (ret) {
 		musb_enable_interrupts(musb);
@@ -2098,7 +2102,6 @@ musb_init_controller(struct device *dev, int nIrq, void __iomem *ctrl)
 
 	/* Init IRQ workqueue before request_irq */
 	INIT_WORK(&musb->irq_work, musb_irq_work);
-	INIT_DELAYED_WORK(&musb->recover_work, musb_recover_work);
 	INIT_DELAYED_WORK(&musb->deassert_reset_work, musb_deassert_reset);
 	INIT_DELAYED_WORK(&musb->finish_resume_work, musb_host_finish_resume);
 
@@ -2194,7 +2197,6 @@ fail4:
 
 fail3:
 	cancel_work_sync(&musb->irq_work);
-	cancel_delayed_work_sync(&musb->recover_work);
 	cancel_delayed_work_sync(&musb->finish_resume_work);
 	cancel_delayed_work_sync(&musb->deassert_reset_work);
 	if (musb->dma_controller)
@@ -2260,7 +2262,6 @@ static int musb_remove(struct platform_device *pdev)
 		dma_controller_destroy(musb->dma_controller);
 
 	cancel_work_sync(&musb->irq_work);
-	cancel_delayed_work_sync(&musb->recover_work);
 	cancel_delayed_work_sync(&musb->finish_resume_work);
 	cancel_delayed_work_sync(&musb->deassert_reset_work);
 	musb_free(musb);
diff --git a/drivers/usb/musb/musb_core.h b/drivers/usb/musb/musb_core.h
index 1e03c7ec82e4..3877249a8b2d 100644
--- a/drivers/usb/musb/musb_core.h
+++ b/drivers/usb/musb/musb_core.h
@@ -301,7 +301,6 @@ struct musb {
 
 	irqreturn_t		(*isr)(int, void *);
 	struct work_struct	irq_work;
-	struct delayed_work	recover_work;
 	struct delayed_work	deassert_reset_work;
 	struct delayed_work	finish_resume_work;
 	u16			hwvers;
-- 
cgit v1.2.3-59-g8ed1b


From 06753fe115c517b715616ef7ef4f56b1b46ecc69 Mon Sep 17 00:00:00 2001
From: Felipe Balbi <balbi@ti.com>
Date: Thu, 26 Feb 2015 14:33:41 -0600
Subject: usb: musb: core: remove unnecessary forward declaration

no functional changes, cleanup only.

Tested-by: Bin Liu <b-liu@ti.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
---
 drivers/usb/musb/musb_core.c | 1 -
 1 file changed, 1 deletion(-)

(limited to 'drivers/usb')

diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c
index b410af6b0510..ecf2219ebc78 100644
--- a/drivers/usb/musb/musb_core.c
+++ b/drivers/usb/musb/musb_core.c
@@ -508,7 +508,6 @@ void musb_hnp_stop(struct musb *musb)
 }
 
 static void musb_disable_interrupts(struct musb *musb);
-static void musb_generic_disable(struct musb *musb);
 static void musb_recover_from_babble(struct musb *musb);
 
 /*
-- 
cgit v1.2.3-59-g8ed1b


From 0244336f812583299291e18b69a75be5674e819f Mon Sep 17 00:00:00 2001
From: Felipe Balbi <balbi@ti.com>
Date: Thu, 26 Feb 2015 14:42:19 -0600
Subject: usb: musb: core: disable irqs inside babble recovery

There's no point is splitting those anymore.

We're now also able to drop another forward
declaration.

Tested-by: Bin Liu <b-liu@ti.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
---
 drivers/usb/musb/musb_core.c | 7 +++----
 1 file changed, 3 insertions(+), 4 deletions(-)

(limited to 'drivers/usb')

diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c
index ecf2219ebc78..3916e73abf7d 100644
--- a/drivers/usb/musb/musb_core.c
+++ b/drivers/usb/musb/musb_core.c
@@ -507,7 +507,6 @@ void musb_hnp_stop(struct musb *musb)
 	musb->port1_status &= ~(USB_PORT_STAT_C_CONNECTION << 16);
 }
 
-static void musb_disable_interrupts(struct musb *musb);
 static void musb_recover_from_babble(struct musb *musb);
 
 /*
@@ -883,10 +882,8 @@ b_host:
 			if (power & MUSB_POWER_HSMODE) {
 				dev_err(musb->controller, "Babble\n");
 
-				if (is_host_active(musb)) {
-					musb_disable_interrupts(musb);
+				if (is_host_active(musb))
 					musb_recover_from_babble(musb);
-				}
 			}
 		} else {
 			dev_dbg(musb->controller, "BUS RESET as %s\n",
@@ -1835,6 +1832,8 @@ static void musb_recover_from_babble(struct musb *musb)
 	int ret;
 	u8 devctl;
 
+	musb_disable_interrupts(musb);
+
 	/*
 	 * wait at least 320 cycles of 60MHz clock. That's 5.3us, we will give
 	 * it some slack and wait for 10us.
-- 
cgit v1.2.3-59-g8ed1b


From 34754dec8ab83799a0a37f2a7ada8ce1e53d174b Mon Sep 17 00:00:00 2001
From: Felipe Balbi <balbi@ti.com>
Date: Thu, 26 Feb 2015 14:43:57 -0600
Subject: usb: musb: core: always try to recover from babble

we can also have babble conditions with LS/FS
and we also want to recover in that case.

Because of that we will drop the check of HSMODE
and always try to run babble recovery.

Suggested-by: Bin Liu <b-liu@ti.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
---
 drivers/usb/musb/musb_core.c | 22 ++++++----------------
 1 file changed, 6 insertions(+), 16 deletions(-)

(limited to 'drivers/usb')

diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c
index 3916e73abf7d..a48b5a9c6c47 100644
--- a/drivers/usb/musb/musb_core.c
+++ b/drivers/usb/musb/musb_core.c
@@ -863,28 +863,18 @@ b_host:
 	if (int_usb & MUSB_INTR_RESET) {
 		handled = IRQ_HANDLED;
 		if (devctl & MUSB_DEVCTL_HM) {
-			u8 power = musb_readl(musb->mregs, MUSB_POWER);
-
 			/*
-			 * Looks like non-HS BABBLE can be ignored, but
-			 * HS BABBLE is an error condition.
-			 *
-			 * For HS the solution is to avoid babble in the first
-			 * place and fix what caused BABBLE.
-			 *
-			 * When HS BABBLE happens what we can depends on which
+			 * When BABBLE happens what we can depends on which
 			 * platform MUSB is running, because some platforms
 			 * implemented proprietary means for 'recovering' from
 			 * Babble conditions. One such platform is AM335x. In
-			 * most cases, however, the only thing we can do is drop
-			 * the session.
+			 * most cases, however, the only thing we can do is
+			 * drop the session.
 			 */
-			if (power & MUSB_POWER_HSMODE) {
-				dev_err(musb->controller, "Babble\n");
+			dev_err(musb->controller, "Babble\n");
 
-				if (is_host_active(musb))
-					musb_recover_from_babble(musb);
-			}
+			if (is_host_active(musb))
+				musb_recover_from_babble(musb);
 		} else {
 			dev_dbg(musb->controller, "BUS RESET as %s\n",
 				usb_otg_state_string(musb->xceiv->otg->state));
-- 
cgit v1.2.3-59-g8ed1b


From a285f40d80d440853ac908017d6d949ae2a7f88e Mon Sep 17 00:00:00 2001
From: Mian Yousaf Kaukab <yousaf.kaukab@intel.com>
Date: Mon, 2 Feb 2015 10:55:23 +0100
Subject: usb: gadget: net2280: use ep_autoconfig compatible names in advance
 mode

Each struct usb_ep added for net2280 can be used in either direction.
Whereas, each struct usb_ep for usb3380 has fixed direction. Use
ep_autoconf compatible names so that endpoint with correct direction
can be selected.

Name sequence is due to the logic in usb_reinit_338x() in ne[] and
ep_reg_addr[].

Signed-off-by: Mian Yousaf Kaukab <yousaf.kaukab@intel.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
---
 drivers/usb/gadget/udc/net2280.c | 9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

(limited to 'drivers/usb')

diff --git a/drivers/usb/gadget/udc/net2280.c b/drivers/usb/gadget/udc/net2280.c
index d2c0bf65e345..b7024dcce83a 100644
--- a/drivers/usb/gadget/udc/net2280.c
+++ b/drivers/usb/gadget/udc/net2280.c
@@ -80,6 +80,13 @@ static const char *const ep_name[] = {
 	"ep-e", "ep-f", "ep-g", "ep-h",
 };
 
+/* Endpoint names for usb3380 advance mode */
+static const char *const ep_name_adv[] = {
+	ep0name,
+	"ep1in", "ep2out", "ep3in", "ep4out",
+	"ep1out", "ep2in", "ep3out", "ep4in",
+};
+
 /* mode 0 == ep-{a,b,c,d} 1K fifo each
  * mode 1 == ep-{a,b} 2K fifo each, ep-{c,d} unavailable
  * mode 2 == ep-a 2K fifo, ep-{b,c} 1K each, ep-d unavailable
@@ -1977,7 +1984,7 @@ static void usb_reinit_338x(struct net2280 *dev)
 	for (i = 0; i < dev->n_ep; i++) {
 		struct net2280_ep *ep = &dev->ep[i];
 
-		ep->ep.name = ep_name[i];
+		ep->ep.name = dev->enhanced_mode ? ep_name_adv[i] : ep_name[i];
 		ep->dev = dev;
 		ep->num = i;
 
-- 
cgit v1.2.3-59-g8ed1b


From fb2a85dd933c2793f5aabeb84af8b3bc00c0c968 Mon Sep 17 00:00:00 2001
From: Mian Yousaf Kaukab <yousaf.kaukab@intel.com>
Date: Mon, 2 Feb 2015 10:55:24 +0100
Subject: usb: gadget: net2280: remove fiforegs as it is unused

Remove fiforegs from struct net2280 and net2280_ep as it is unused.
By the way, ep->fiforegs = &dev->fiforegs[i] assignment is incorrect.
It should be ep->fiforegs = &dev->fiforegs[ne[i]], but it doesn't
matter now.

Signed-off-by: Mian Yousaf Kaukab <yousaf.kaukab@intel.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
---
 drivers/usb/gadget/udc/net2280.c | 4 ----
 drivers/usb/gadget/udc/net2280.h | 2 --
 2 files changed, 6 deletions(-)

(limited to 'drivers/usb')

diff --git a/drivers/usb/gadget/udc/net2280.c b/drivers/usb/gadget/udc/net2280.c
index b7024dcce83a..d51430f26ecf 100644
--- a/drivers/usb/gadget/udc/net2280.c
+++ b/drivers/usb/gadget/udc/net2280.c
@@ -1996,11 +1996,9 @@ static void usb_reinit_338x(struct net2280 *dev)
 			ep->regs = (struct net2280_ep_regs __iomem *)
 				(((void __iomem *)&dev->epregs[ne[i]]) +
 				ep_reg_addr[i]);
-			ep->fiforegs = &dev->fiforegs[i];
 		} else {
 			ep->cfg = &dev->epregs[i];
 			ep->regs = &dev->epregs[i];
-			ep->fiforegs = &dev->fiforegs[i];
 		}
 
 		ep->fifo_size = (i != 0) ? 2048 : 512;
@@ -3380,8 +3378,6 @@ static int net2280_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 		u32 usbstat;
 		dev->usb_ext = (struct usb338x_usb_ext_regs __iomem *)
 							(base + 0x00b4);
-		dev->fiforegs = (struct usb338x_fifo_regs __iomem *)
-							(base + 0x0500);
 		dev->llregs = (struct usb338x_ll_regs __iomem *)
 							(base + 0x0700);
 		dev->ll_lfps_regs = (struct usb338x_ll_lfps_regs __iomem *)
diff --git a/drivers/usb/gadget/udc/net2280.h b/drivers/usb/gadget/udc/net2280.h
index ac8d5a20a378..4dff60d34f73 100644
--- a/drivers/usb/gadget/udc/net2280.h
+++ b/drivers/usb/gadget/udc/net2280.h
@@ -96,7 +96,6 @@ struct net2280_ep {
 	struct net2280_ep_regs			__iomem *regs;
 	struct net2280_dma_regs			__iomem *dma;
 	struct net2280_dma			*dummy;
-	struct usb338x_fifo_regs __iomem *fiforegs;
 	dma_addr_t				td_dma;	/* of dummy */
 	struct net2280				*dev;
 	unsigned long				irqs;
@@ -181,7 +180,6 @@ struct net2280 {
 	struct net2280_dma_regs		__iomem *dma;
 	struct net2280_dep_regs		__iomem *dep;
 	struct net2280_ep_regs		__iomem *epregs;
-	struct usb338x_fifo_regs	__iomem *fiforegs;
 	struct usb338x_ll_regs		__iomem *llregs;
 	struct usb338x_ll_lfps_regs	__iomem *ll_lfps_regs;
 	struct usb338x_ll_tsn_regs	__iomem *ll_tsn_regs;
-- 
cgit v1.2.3-59-g8ed1b


From 9ceafcc2b3ad48ad2ef42608f1505ecad515d144 Mon Sep 17 00:00:00 2001
From: Mian Yousaf Kaukab <yousaf.kaukab@intel.com>
Date: Mon, 2 Feb 2015 10:55:25 +0100
Subject: usb: gadget: net2280: print error in ep_ops error paths

Hopefully, these prints will help localize the problems faster.

[ balbi@ti.com: removed 2 unnecessary OOM error messages ]

Signed-off-by: Mian Yousaf Kaukab <yousaf.kaukab@intel.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
---
 drivers/usb/gadget/udc/net2280.c | 166 ++++++++++++++++++++++++++++-----------
 1 file changed, 119 insertions(+), 47 deletions(-)

(limited to 'drivers/usb')

diff --git a/drivers/usb/gadget/udc/net2280.c b/drivers/usb/gadget/udc/net2280.c
index d51430f26ecf..5a8f6b6f7c8d 100644
--- a/drivers/usb/gadget/udc/net2280.c
+++ b/drivers/usb/gadget/udc/net2280.c
@@ -145,31 +145,44 @@ net2280_enable(struct usb_ep *_ep, const struct usb_endpoint_descriptor *desc)
 	u32			max, tmp;
 	unsigned long		flags;
 	static const u32 ep_key[9] = { 1, 0, 1, 0, 1, 1, 0, 1, 0 };
+	int ret = 0;
 
 	ep = container_of(_ep, struct net2280_ep, ep);
 	if (!_ep || !desc || ep->desc || _ep->name == ep0name ||
-			desc->bDescriptorType != USB_DT_ENDPOINT)
+			desc->bDescriptorType != USB_DT_ENDPOINT) {
+		pr_err("%s: failed at line=%d\n", __func__, __LINE__);
 		return -EINVAL;
+	}
 	dev = ep->dev;
-	if (!dev->driver || dev->gadget.speed == USB_SPEED_UNKNOWN)
-		return -ESHUTDOWN;
+	if (!dev->driver || dev->gadget.speed == USB_SPEED_UNKNOWN) {
+		ret = -ESHUTDOWN;
+		goto print_err;
+	}
 
 	/* erratum 0119 workaround ties up an endpoint number */
-	if ((desc->bEndpointAddress & 0x0f) == EP_DONTUSE)
-		return -EDOM;
+	if ((desc->bEndpointAddress & 0x0f) == EP_DONTUSE) {
+		ret = -EDOM;
+		goto print_err;
+	}
 
 	if (dev->quirks & PLX_SUPERSPEED) {
-		if ((desc->bEndpointAddress & 0x0f) >= 0x0c)
-			return -EDOM;
+		if ((desc->bEndpointAddress & 0x0f) >= 0x0c) {
+			ret = -EDOM;
+			goto print_err;
+		}
 		ep->is_in = !!usb_endpoint_dir_in(desc);
-		if (dev->enhanced_mode && ep->is_in && ep_key[ep->num])
-			return -EINVAL;
+		if (dev->enhanced_mode && ep->is_in && ep_key[ep->num]) {
+			ret = -EINVAL;
+			goto print_err;
+		}
 	}
 
 	/* sanity check ep-e/ep-f since their fifos are small */
 	max = usb_endpoint_maxp(desc) & 0x1fff;
-	if (ep->num > 4 && max > 64 && (dev->quirks & PLX_LEGACY))
-		return -ERANGE;
+	if (ep->num > 4 && max > 64 && (dev->quirks & PLX_LEGACY)) {
+		ret = -ERANGE;
+		goto print_err;
+	}
 
 	spin_lock_irqsave(&dev->lock, flags);
 	_ep->maxpacket = max & 0x7ff;
@@ -199,7 +212,8 @@ net2280_enable(struct usb_ep *_ep, const struct usb_endpoint_descriptor *desc)
 		    (dev->gadget.speed == USB_SPEED_HIGH && max != 512) ||
 		    (dev->gadget.speed == USB_SPEED_FULL && max > 64)) {
 			spin_unlock_irqrestore(&dev->lock, flags);
-			return -ERANGE;
+			ret = -ERANGE;
+			goto print_err;
 		}
 	}
 	ep->is_iso = (tmp == USB_ENDPOINT_XFER_ISOC);
@@ -278,7 +292,11 @@ net2280_enable(struct usb_ep *_ep, const struct usb_endpoint_descriptor *desc)
 
 	/* pci writes may still be posted */
 	spin_unlock_irqrestore(&dev->lock, flags);
-	return 0;
+	return ret;
+
+print_err:
+	dev_err(&ep->dev->pdev->dev, "%s: error=%d\n", __func__, ret);
+	return ret;
 }
 
 static int handshake(u32 __iomem *ptr, u32 mask, u32 done, int usec)
@@ -433,9 +451,10 @@ static int net2280_disable(struct usb_ep *_ep)
 	unsigned long		flags;
 
 	ep = container_of(_ep, struct net2280_ep, ep);
-	if (!_ep || !ep->desc || _ep->name == ep0name)
+	if (!_ep || !ep->desc || _ep->name == ep0name) {
+		pr_err("%s: Invalid ep=%p or ep->desc\n", __func__, _ep);
 		return -EINVAL;
-
+	}
 	spin_lock_irqsave(&ep->dev->lock, flags);
 	nuke(ep);
 
@@ -465,8 +484,10 @@ static struct usb_request
 	struct net2280_ep	*ep;
 	struct net2280_request	*req;
 
-	if (!_ep)
+	if (!_ep) {
+		pr_err("%s: Invalid ep\n", __func__);
 		return NULL;
+	}
 	ep = container_of(_ep, struct net2280_ep, ep);
 
 	req = kzalloc(sizeof(*req), gfp_flags);
@@ -498,8 +519,11 @@ static void net2280_free_request(struct usb_ep *_ep, struct usb_request *_req)
 	struct net2280_request	*req;
 
 	ep = container_of(_ep, struct net2280_ep, ep);
-	if (!_ep || !_req)
+	if (!_ep || !_req) {
+		dev_err(&ep->dev->pdev->dev, "%s: Inavlid ep=%p or req=%p\n",
+							__func__, _ep, _req);
 		return;
+	}
 
 	req = container_of(_req, struct net2280_request, req);
 	WARN_ON(!list_empty(&req->queue));
@@ -903,35 +927,44 @@ net2280_queue(struct usb_ep *_ep, struct usb_request *_req, gfp_t gfp_flags)
 	struct net2280_ep	*ep;
 	struct net2280		*dev;
 	unsigned long		flags;
+	int ret = 0;
 
 	/* we always require a cpu-view buffer, so that we can
 	 * always use pio (as fallback or whatever).
 	 */
-	req = container_of(_req, struct net2280_request, req);
-	if (!_req || !_req->complete || !_req->buf ||
-				!list_empty(&req->queue))
-		return -EINVAL;
-	if (_req->length > (~0 & DMA_BYTE_COUNT_MASK))
-		return -EDOM;
 	ep = container_of(_ep, struct net2280_ep, ep);
-	if (!_ep || (!ep->desc && ep->num != 0))
+	if (!_ep || (!ep->desc && ep->num != 0)) {
+		pr_err("%s: Invalid ep=%p or ep->desc\n", __func__, _ep);
 		return -EINVAL;
+	}
+	req = container_of(_req, struct net2280_request, req);
+	if (!_req || !_req->complete || !_req->buf ||
+				!list_empty(&req->queue)) {
+		ret = -EINVAL;
+		goto print_err;
+	}
+	if (_req->length > (~0 & DMA_BYTE_COUNT_MASK)) {
+		ret = -EDOM;
+		goto print_err;
+	}
 	dev = ep->dev;
-	if (!dev->driver || dev->gadget.speed == USB_SPEED_UNKNOWN)
-		return -ESHUTDOWN;
+	if (!dev->driver || dev->gadget.speed == USB_SPEED_UNKNOWN) {
+		ret = -ESHUTDOWN;
+		goto print_err;
+	}
 
 	/* FIXME implement PIO fallback for ZLPs with DMA */
-	if (ep->dma && _req->length == 0)
-		return -EOPNOTSUPP;
+	if (ep->dma && _req->length == 0) {
+		ret = -EOPNOTSUPP;
+		goto print_err;
+	}
 
 	/* set up dma mapping in case the caller didn't */
 	if (ep->dma) {
-		int ret;
-
 		ret = usb_gadget_map_request(&dev->gadget, _req,
 				ep->is_in);
 		if (ret)
-			return ret;
+			goto print_err;
 	}
 
 	ep_vdbg(dev, "%s queue req %p, len %d buf %p\n",
@@ -1020,7 +1053,11 @@ done:
 	spin_unlock_irqrestore(&dev->lock, flags);
 
 	/* pci writes may still be posted */
-	return 0;
+	return ret;
+
+print_err:
+	dev_err(&ep->dev->pdev->dev, "%s: error=%d\n", __func__, ret);
+	return ret;
 }
 
 static inline void
@@ -1141,8 +1178,11 @@ static int net2280_dequeue(struct usb_ep *_ep, struct usb_request *_req)
 	int			stopped;
 
 	ep = container_of(_ep, struct net2280_ep, ep);
-	if (!_ep || (!ep->desc && ep->num != 0) || !_req)
+	if (!_ep || (!ep->desc && ep->num != 0) || !_req) {
+		pr_err("%s: Invalid ep=%p or ep->desc or req=%p\n",
+						__func__, _ep, _req);
 		return -EINVAL;
+	}
 
 	spin_lock_irqsave(&ep->dev->lock, flags);
 	stopped = ep->stopped;
@@ -1164,6 +1204,8 @@ static int net2280_dequeue(struct usb_ep *_ep, struct usb_request *_req)
 	}
 	if (&req->req != _req) {
 		spin_unlock_irqrestore(&ep->dev->lock, flags);
+		dev_err(&ep->dev->pdev->dev, "%s: Request mismatch\n",
+								__func__);
 		return -EINVAL;
 	}
 
@@ -1221,20 +1263,28 @@ net2280_set_halt_and_wedge(struct usb_ep *_ep, int value, int wedged)
 	int			retval = 0;
 
 	ep = container_of(_ep, struct net2280_ep, ep);
-	if (!_ep || (!ep->desc && ep->num != 0))
+	if (!_ep || (!ep->desc && ep->num != 0)) {
+		pr_err("%s: Invalid ep=%p or ep->desc\n", __func__, _ep);
 		return -EINVAL;
-	if (!ep->dev->driver || ep->dev->gadget.speed == USB_SPEED_UNKNOWN)
-		return -ESHUTDOWN;
+	}
+	if (!ep->dev->driver || ep->dev->gadget.speed == USB_SPEED_UNKNOWN) {
+		retval = -ESHUTDOWN;
+		goto print_err;
+	}
 	if (ep->desc /* not ep0 */ && (ep->desc->bmAttributes & 0x03)
-						== USB_ENDPOINT_XFER_ISOC)
-		return -EINVAL;
+						== USB_ENDPOINT_XFER_ISOC) {
+		retval = -EINVAL;
+		goto print_err;
+	}
 
 	spin_lock_irqsave(&ep->dev->lock, flags);
-	if (!list_empty(&ep->queue))
+	if (!list_empty(&ep->queue)) {
 		retval = -EAGAIN;
-	else if (ep->is_in && value && net2280_fifo_status(_ep) != 0)
+		goto print_unlock;
+	} else if (ep->is_in && value && net2280_fifo_status(_ep) != 0) {
 		retval = -EAGAIN;
-	else {
+		goto print_unlock;
+	} else {
 		ep_vdbg(ep->dev, "%s %s %s\n", _ep->name,
 				value ? "set" : "clear",
 				wedged ? "wedge" : "halt");
@@ -1258,6 +1308,12 @@ net2280_set_halt_and_wedge(struct usb_ep *_ep, int value, int wedged)
 	spin_unlock_irqrestore(&ep->dev->lock, flags);
 
 	return retval;
+
+print_unlock:
+	spin_unlock_irqrestore(&ep->dev->lock, flags);
+print_err:
+	dev_err(&ep->dev->pdev->dev, "%s: error=%d\n", __func__, retval);
+	return retval;
 }
 
 static int net2280_set_halt(struct usb_ep *_ep, int value)
@@ -1267,8 +1323,10 @@ static int net2280_set_halt(struct usb_ep *_ep, int value)
 
 static int net2280_set_wedge(struct usb_ep *_ep)
 {
-	if (!_ep || _ep->name == ep0name)
+	if (!_ep || _ep->name == ep0name) {
+		pr_err("%s: Invalid ep=%p or ep0\n", __func__, _ep);
 		return -EINVAL;
+	}
 	return net2280_set_halt_and_wedge(_ep, 1, 1);
 }
 
@@ -1278,14 +1336,22 @@ static int net2280_fifo_status(struct usb_ep *_ep)
 	u32			avail;
 
 	ep = container_of(_ep, struct net2280_ep, ep);
-	if (!_ep || (!ep->desc && ep->num != 0))
+	if (!_ep || (!ep->desc && ep->num != 0)) {
+		pr_err("%s: Invalid ep=%p or ep->desc\n", __func__, _ep);
 		return -ENODEV;
-	if (!ep->dev->driver || ep->dev->gadget.speed == USB_SPEED_UNKNOWN)
+	}
+	if (!ep->dev->driver || ep->dev->gadget.speed == USB_SPEED_UNKNOWN) {
+		dev_err(&ep->dev->pdev->dev,
+			"%s: Invalid driver=%p or speed=%d\n",
+			__func__, ep->dev->driver, ep->dev->gadget.speed);
 		return -ESHUTDOWN;
+	}
 
 	avail = readl(&ep->regs->ep_avail) & (BIT(12) - 1);
-	if (avail > ep->fifo_size)
+	if (avail > ep->fifo_size) {
+		dev_err(&ep->dev->pdev->dev, "%s: Fifo overflow\n", __func__);
 		return -EOVERFLOW;
+	}
 	if (ep->is_in)
 		avail = ep->fifo_size - avail;
 	return avail;
@@ -1296,10 +1362,16 @@ static void net2280_fifo_flush(struct usb_ep *_ep)
 	struct net2280_ep	*ep;
 
 	ep = container_of(_ep, struct net2280_ep, ep);
-	if (!_ep || (!ep->desc && ep->num != 0))
+	if (!_ep || (!ep->desc && ep->num != 0)) {
+		pr_err("%s: Invalid ep=%p or ep->desc\n", __func__, _ep);
 		return;
-	if (!ep->dev->driver || ep->dev->gadget.speed == USB_SPEED_UNKNOWN)
+	}
+	if (!ep->dev->driver || ep->dev->gadget.speed == USB_SPEED_UNKNOWN) {
+		dev_err(&ep->dev->pdev->dev,
+			"%s: Invalid driver=%p or speed=%d\n",
+			__func__, ep->dev->driver, ep->dev->gadget.speed);
 		return;
+	}
 
 	writel(BIT(FIFO_FLUSH), &ep->regs->ep_stat);
 	(void) readl(&ep->regs->ep_rsp);
-- 
cgit v1.2.3-59-g8ed1b


From 12366ef1942128d9bd8baa77e7eb4010b18fd676 Mon Sep 17 00:00:00 2001
From: Mian Yousaf Kaukab <yousaf.kaukab@intel.com>
Date: Mon, 2 Feb 2015 10:55:26 +0100
Subject: usb: gadget: net2280: don't connect from udc_start

net2280_start can be called with pullup disabled. Don't set
softconnect flag in it. Let net2280_pullup handle the connection part.

Signed-off-by: Mian Yousaf Kaukab <yousaf.kaukab@intel.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
---
 drivers/usb/gadget/udc/net2280.c | 1 -
 1 file changed, 1 deletion(-)

(limited to 'drivers/usb')

diff --git a/drivers/usb/gadget/udc/net2280.c b/drivers/usb/gadget/udc/net2280.c
index 5a8f6b6f7c8d..5041e218a302 100644
--- a/drivers/usb/gadget/udc/net2280.c
+++ b/drivers/usb/gadget/udc/net2280.c
@@ -2263,7 +2263,6 @@ static int net2280_start(struct usb_gadget *_gadget,
 		dev->ep[i].irqs = 0;
 
 	/* hook up the driver ... */
-	dev->softconnect = 1;
 	driver->driver.bus = NULL;
 	dev->driver = driver;
 
-- 
cgit v1.2.3-59-g8ed1b


From ccf5fb698155ee289b9257b0f1d6be3c7900ba0a Mon Sep 17 00:00:00 2001
From: Felipe Balbi <balbi@ti.com>
Date: Fri, 27 Feb 2015 09:44:51 -0600
Subject: usb: gadget: net2280: silence sparse warning

Silence the following warning:

drivers/usb/gadget/udc/net2280.c:3176:33: warning: context imbalance in
'handle_stat1_irqs' - unexpected unlock

Signed-off-by: Felipe Balbi <balbi@ti.com>
---
 drivers/usb/gadget/udc/net2280.c | 2 ++
 1 file changed, 2 insertions(+)

(limited to 'drivers/usb')

diff --git a/drivers/usb/gadget/udc/net2280.c b/drivers/usb/gadget/udc/net2280.c
index 5041e218a302..9871b90195ad 100644
--- a/drivers/usb/gadget/udc/net2280.c
+++ b/drivers/usb/gadget/udc/net2280.c
@@ -3128,6 +3128,8 @@ next_endpoints:
 		BIT(PCI_RETRY_ABORT_INTERRUPT))
 
 static void handle_stat1_irqs(struct net2280 *dev, u32 stat)
+__releases(dev->lock)
+__acquires(dev->lock)
 {
 	struct net2280_ep	*ep;
 	u32			tmp, num, mask, scratch;
-- 
cgit v1.2.3-59-g8ed1b


From 1b61625f8b5d87caf9633d7dbfbaf1ea8270036d Mon Sep 17 00:00:00 2001
From: Felipe Balbi <balbi@ti.com>
Date: Fri, 27 Feb 2015 13:19:39 -0600
Subject: usb: musb: cppi41: decrease indentation level

no functional changes, clean up only.

Signed-off-by: Felipe Balbi <balbi@ti.com>
---
 drivers/usb/musb/musb_cppi41.c | 88 +++++++++++++++++++++---------------------
 1 file changed, 45 insertions(+), 43 deletions(-)

(limited to 'drivers/usb')

diff --git a/drivers/usb/musb/musb_cppi41.c b/drivers/usb/musb/musb_cppi41.c
index be84562d021b..73ac9835485d 100644
--- a/drivers/usb/musb/musb_cppi41.c
+++ b/drivers/usb/musb/musb_cppi41.c
@@ -225,10 +225,12 @@ static void cppi41_dma_callback(void *private_data)
 	struct dma_channel *channel = private_data;
 	struct cppi41_dma_channel *cppi41_channel = channel->private_data;
 	struct musb_hw_ep *hw_ep = cppi41_channel->hw_ep;
+	struct cppi41_dma_controller *controller;
 	struct musb *musb = hw_ep->musb;
 	unsigned long flags;
 	struct dma_tx_state txstate;
 	u32 transferred;
+	int is_hs = 0;
 	bool empty;
 
 	spin_lock_irqsave(&musb->lock, flags);
@@ -251,58 +253,58 @@ static void cppi41_dma_callback(void *private_data)
 	empty = musb_is_tx_fifo_empty(hw_ep);
 	if (empty) {
 		cppi41_trans_done(cppi41_channel);
-	} else {
-		struct cppi41_dma_controller *controller;
-		int is_hs = 0;
-		/*
-		 * On AM335x it has been observed that the TX interrupt fires
-		 * too early that means the TXFIFO is not yet empty but the DMA
-		 * engine says that it is done with the transfer. We don't
-		 * receive a FIFO empty interrupt so the only thing we can do is
-		 * to poll for the bit. On HS it usually takes 2us, on FS around
-		 * 110us - 150us depending on the transfer size.
-		 * We spin on HS (no longer than than 25us and setup a timer on
-		 * FS to check for the bit and complete the transfer.
-		 */
-		controller = cppi41_channel->controller;
+		goto out;
+	}
 
-		if (is_host_active(musb)) {
-			if (musb->port1_status & USB_PORT_STAT_HIGH_SPEED)
-				is_hs = 1;
-		} else {
-			if (musb->g.speed == USB_SPEED_HIGH)
-				is_hs = 1;
-		}
-		if (is_hs) {
-			unsigned wait = 25;
-
-			do {
-				empty = musb_is_tx_fifo_empty(hw_ep);
-				if (empty)
-					break;
-				wait--;
-				if (!wait)
-					break;
-				udelay(1);
-			} while (1);
+	/*
+	 * On AM335x it has been observed that the TX interrupt fires
+	 * too early that means the TXFIFO is not yet empty but the DMA
+	 * engine says that it is done with the transfer. We don't
+	 * receive a FIFO empty interrupt so the only thing we can do is
+	 * to poll for the bit. On HS it usually takes 2us, on FS around
+	 * 110us - 150us depending on the transfer size.
+	 * We spin on HS (no longer than than 25us and setup a timer on
+	 * FS to check for the bit and complete the transfer.
+	 */
+	controller = cppi41_channel->controller;
+
+	if (is_host_active(musb)) {
+		if (musb->port1_status & USB_PORT_STAT_HIGH_SPEED)
+			is_hs = 1;
+	} else {
+		if (musb->g.speed == USB_SPEED_HIGH)
+			is_hs = 1;
+	}
+	if (is_hs) {
+		unsigned wait = 25;
 
+		do {
 			empty = musb_is_tx_fifo_empty(hw_ep);
-			if (empty) {
-				cppi41_trans_done(cppi41_channel);
-				goto out;
-			}
+			if (empty)
+				break;
+			wait--;
+			if (!wait)
+				break;
+			udelay(1);
+		} while (1);
+
+		empty = musb_is_tx_fifo_empty(hw_ep);
+		if (empty) {
+			cppi41_trans_done(cppi41_channel);
+			goto out;
 		}
-		list_add_tail(&cppi41_channel->tx_check,
-				&controller->early_tx_list);
-		if (!hrtimer_is_queued(&controller->early_tx)) {
-			unsigned long usecs = cppi41_channel->total_len / 10;
+	}
+	list_add_tail(&cppi41_channel->tx_check,
+			&controller->early_tx_list);
+	if (!hrtimer_is_queued(&controller->early_tx)) {
+		unsigned long usecs = cppi41_channel->total_len / 10;
 
-			hrtimer_start_range_ns(&controller->early_tx,
+		hrtimer_start_range_ns(&controller->early_tx,
 				ktime_set(0, usecs * NSEC_PER_USEC),
 				20 * NSEC_PER_USEC,
 				HRTIMER_MODE_REL);
-		}
 	}
+
 out:
 	spin_unlock_irqrestore(&musb->lock, flags);
 }
-- 
cgit v1.2.3-59-g8ed1b


From af63429cf046210d7313805b579dd779d10ad1c0 Mon Sep 17 00:00:00 2001
From: Felipe Balbi <balbi@ti.com>
Date: Fri, 27 Feb 2015 13:21:14 -0600
Subject: usb: musb: cppi41: exit early when tx fifo is empty

as soon as we find out tx fifo is empty, there's
no need to break out of the loop just to have another
branch to complete the transfer. We can just complete
transfer and exit early.

Signed-off-by: Felipe Balbi <balbi@ti.com>
---
 drivers/usb/musb/musb_cppi41.c | 12 ++++--------
 1 file changed, 4 insertions(+), 8 deletions(-)

(limited to 'drivers/usb')

diff --git a/drivers/usb/musb/musb_cppi41.c b/drivers/usb/musb/musb_cppi41.c
index 73ac9835485d..4407f30d0b86 100644
--- a/drivers/usb/musb/musb_cppi41.c
+++ b/drivers/usb/musb/musb_cppi41.c
@@ -280,19 +280,15 @@ static void cppi41_dma_callback(void *private_data)
 
 		do {
 			empty = musb_is_tx_fifo_empty(hw_ep);
-			if (empty)
-				break;
+			if (empty) {
+				cppi41_trans_done(cppi41_channel);
+				goto out;
+			}
 			wait--;
 			if (!wait)
 				break;
 			udelay(1);
 		} while (1);
-
-		empty = musb_is_tx_fifo_empty(hw_ep);
-		if (empty) {
-			cppi41_trans_done(cppi41_channel);
-			goto out;
-		}
 	}
 	list_add_tail(&cppi41_channel->tx_check,
 			&controller->early_tx_list);
-- 
cgit v1.2.3-59-g8ed1b


From 043f5b75dd2b1fbd45d5f367d50e5ae5b4afa955 Mon Sep 17 00:00:00 2001
From: Felipe Balbi <balbi@ti.com>
Date: Fri, 27 Feb 2015 13:22:27 -0600
Subject: usb: musb: cppi41: do not call udelay()

according to comment in code, HS completion
will happen pretty fast, instead of using
udelay(), let's just busy loop and drop a
cpu_relax() where udelay() was.

Signed-off-by: Felipe Balbi <balbi@ti.com>
---
 drivers/usb/musb/musb_cppi41.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/usb')

diff --git a/drivers/usb/musb/musb_cppi41.c b/drivers/usb/musb/musb_cppi41.c
index 4407f30d0b86..9dc45a4a9fa8 100644
--- a/drivers/usb/musb/musb_cppi41.c
+++ b/drivers/usb/musb/musb_cppi41.c
@@ -287,7 +287,7 @@ static void cppi41_dma_callback(void *private_data)
 			wait--;
 			if (!wait)
 				break;
-			udelay(1);
+			cpu_relax();
 		} while (1);
 	}
 	list_add_tail(&cppi41_channel->tx_check,
-- 
cgit v1.2.3-59-g8ed1b


From 9e204d885a6d0ae3696284bacd86e2b94dd936c8 Mon Sep 17 00:00:00 2001
From: Felipe Balbi <balbi@ti.com>
Date: Fri, 27 Feb 2015 19:02:41 -0600
Subject: usb: musb: dsps: use msecs_to_jiffies instead

when polling, we were using n * HZ (where n is
an integer in seconds), however HZ isn't always
correct if we're using cpufreq. A better way
is to use msecs_to_jiffies(n) (where n is now
an integer in miliseconds).

while at that, also rename poll_seconds to poll_timeout
and  change its type to unsigned int.

Signed-off-by: Felipe Balbi <balbi@ti.com>
---
 drivers/usb/musb/musb_dsps.c | 17 ++++++++++-------
 1 file changed, 10 insertions(+), 7 deletions(-)

(limited to 'drivers/usb')

diff --git a/drivers/usb/musb/musb_dsps.c b/drivers/usb/musb/musb_dsps.c
index 30eb6ac29b81..9271450ebacd 100644
--- a/drivers/usb/musb/musb_dsps.c
+++ b/drivers/usb/musb/musb_dsps.c
@@ -119,7 +119,7 @@ struct dsps_musb_wrapper {
 	unsigned	iddig:5;
 	unsigned	iddig_mux:5;
 	/* miscellaneous stuff */
-	u8		poll_seconds;
+	unsigned	poll_timeout;
 };
 
 /*
@@ -285,7 +285,8 @@ static void otg_timer(unsigned long _musb)
 		}
 		if (!(devctl & MUSB_DEVCTL_SESSION) && !skip_session)
 			dsps_writeb(mregs, MUSB_DEVCTL, MUSB_DEVCTL_SESSION);
-		mod_timer(&glue->timer, jiffies + wrp->poll_seconds * HZ);
+		mod_timer(&glue->timer, jiffies +
+				msecs_to_jiffies(wrp->poll_timeout));
 		break;
 	case OTG_STATE_A_WAIT_VFALL:
 		musb->xceiv->otg->state = OTG_STATE_A_WAIT_VRISE;
@@ -352,8 +353,8 @@ static irqreturn_t dsps_interrupt(int irq, void *hci)
 			 */
 			musb->int_usb &= ~MUSB_INTR_VBUSERROR;
 			musb->xceiv->otg->state = OTG_STATE_A_WAIT_VFALL;
-			mod_timer(&glue->timer,
-					jiffies + wrp->poll_seconds * HZ);
+			mod_timer(&glue->timer, jiffies +
+					msecs_to_jiffies(wrp->poll_timeout));
 			WARNING("VBUS error workaround (delay coming)\n");
 		} else if (drvvbus) {
 			MUSB_HST_MODE(musb);
@@ -382,7 +383,8 @@ static irqreturn_t dsps_interrupt(int irq, void *hci)
 	/* Poll for ID change in OTG port mode */
 	if (musb->xceiv->otg->state == OTG_STATE_B_IDLE &&
 			musb->port_mode == MUSB_PORT_MODE_DUAL_ROLE)
-		mod_timer(&glue->timer, jiffies + wrp->poll_seconds * HZ);
+		mod_timer(&glue->timer, jiffies +
+				msecs_to_jiffies(wrp->poll_timeout));
 out:
 	spin_unlock_irqrestore(&musb->lock, flags);
 
@@ -832,7 +834,7 @@ static const struct dsps_musb_wrapper am33xx_driver_data = {
 	.rxep_shift		= 16,
 	.rxep_mask		= 0xfffe,
 	.rxep_bitmap		= (0xfffe << 16),
-	.poll_seconds		= 2,
+	.poll_timeout		= 2000, /* ms */
 };
 
 static const struct of_device_id musb_dsps_of_match[] = {
@@ -888,7 +890,8 @@ static int dsps_resume(struct device *dev)
 	dsps_writel(mbase, wrp->rx_mode, glue->context.rx_mode);
 	if (musb->xceiv->otg->state == OTG_STATE_B_IDLE &&
 	    musb->port_mode == MUSB_PORT_MODE_DUAL_ROLE)
-		mod_timer(&glue->timer, jiffies + wrp->poll_seconds * HZ);
+		mod_timer(&glue->timer, jiffies +
+				msecs_to_jiffies(wrp->poll_timeout));
 
 	return 0;
 }
-- 
cgit v1.2.3-59-g8ed1b


From ad78c918602cb7cce0fab5d5813213853a6f351d Mon Sep 17 00:00:00 2001
From: Felipe Balbi <balbi@ti.com>
Date: Fri, 27 Feb 2015 19:07:49 -0600
Subject: usb: musb: dsps: just start polling already

there's no need to fake an IRQ, just check
if VBUS is valid already.

Signed-off-by: Felipe Balbi <balbi@ti.com>
---
 drivers/usb/musb/musb_dsps.c | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

(limited to 'drivers/usb')

diff --git a/drivers/usb/musb/musb_dsps.c b/drivers/usb/musb/musb_dsps.c
index 9271450ebacd..baa757ba1353 100644
--- a/drivers/usb/musb/musb_dsps.c
+++ b/drivers/usb/musb/musb_dsps.c
@@ -225,9 +225,8 @@ static void dsps_musb_enable(struct musb *musb)
 
 	dsps_writel(reg_base, wrp->epintr_set, epmask);
 	dsps_writel(reg_base, wrp->coreintr_set, coremask);
-	/* Force the DRVVBUS IRQ so we can start polling for ID change. */
-	dsps_writel(reg_base, wrp->coreintr_set,
-		    (1 << wrp->drvvbus) << wrp->usb_shift);
+	/* start polling for ID change. */
+	mod_timer(&glue->timer, jiffies + msecs_to_jiffies(wrp->poll_timeout));
 	dsps_musb_try_idle(musb, 0);
 }
 
-- 
cgit v1.2.3-59-g8ed1b


From eac68e8f979b82d257eea0a4bbcda7b169d330bf Mon Sep 17 00:00:00 2001
From: Robert Baldyga <r.baldyga@samsung.com>
Date: Mon, 9 Mar 2015 15:06:12 +0100
Subject: usb: dwc3: make LPM configurable in DT

This patch removes "Enable USB3 LPM Capability" option from Kconfig
and adds snps,usb3_lpm_capable devicetree property instead of it.

USB3 LPM (Link Power Management) capability is hardware property, and
it's platform dependent, so if our hardware supports this feature, we
want rather to configure it in devicetree than having it as Kconfig option.

Signed-off-by: Robert Baldyga <r.baldyga@samsung.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
---
 Documentation/devicetree/bindings/usb/dwc3.txt | 1 +
 drivers/usb/dwc3/Kconfig                       | 7 -------
 drivers/usb/dwc3/core.c                        | 3 +++
 drivers/usb/dwc3/core.h                        | 2 ++
 drivers/usb/dwc3/host.c                        | 4 +---
 drivers/usb/dwc3/platform_data.h               | 1 +
 6 files changed, 8 insertions(+), 10 deletions(-)

(limited to 'drivers/usb')

diff --git a/Documentation/devicetree/bindings/usb/dwc3.txt b/Documentation/devicetree/bindings/usb/dwc3.txt
index cd7f0454e13a..5cc364309edb 100644
--- a/Documentation/devicetree/bindings/usb/dwc3.txt
+++ b/Documentation/devicetree/bindings/usb/dwc3.txt
@@ -14,6 +14,7 @@ Optional properties:
  - phys: from the *Generic PHY* bindings
  - phy-names: from the *Generic PHY* bindings
  - tx-fifo-resize: determines if the FIFO *has* to be reallocated.
+ - snps,usb3_lpm_capable: determines if platform is USB3 LPM capable
  - snps,disable_scramble_quirk: true when SW should disable data scrambling.
 	Only really useful for FPGA builds.
  - snps,has-lpm-erratum: true when DWC3 was configured with LPM Erratum enabled
diff --git a/drivers/usb/dwc3/Kconfig b/drivers/usb/dwc3/Kconfig
index edbf9c85af7e..827c4f80379f 100644
--- a/drivers/usb/dwc3/Kconfig
+++ b/drivers/usb/dwc3/Kconfig
@@ -104,11 +104,4 @@ config USB_DWC3_DEBUG
 	help
 	  Say Y here to enable debugging messages on DWC3 Driver.
 
-config DWC3_HOST_USB3_LPM_ENABLE
-	bool "Enable USB3 LPM Capability"
-	depends on USB_DWC3_HOST=y || USB_DWC3_DUAL_ROLE=y
-	default n
-	help
-	  Select this when you want to enable USB3 LPM with dwc3 xhci host.
-
 endif
diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
index cd59e919e27e..2bbab3d86fff 100644
--- a/drivers/usb/dwc3/core.c
+++ b/drivers/usb/dwc3/core.c
@@ -804,6 +804,8 @@ static int dwc3_probe(struct platform_device *pdev)
 				"snps,is-utmi-l1-suspend");
 		of_property_read_u8(node, "snps,hird-threshold",
 				&hird_threshold);
+		dwc->usb3_lpm_capable = of_property_read_bool(node,
+				"snps,usb3_lpm_capable");
 
 		dwc->needs_fifo_resize = of_property_read_bool(node,
 				"tx-fifo-resize");
@@ -844,6 +846,7 @@ static int dwc3_probe(struct platform_device *pdev)
 			hird_threshold = pdata->hird_threshold;
 
 		dwc->needs_fifo_resize = pdata->tx_fifo_resize;
+		dwc->usb3_lpm_capable = pdata->usb3_lpm_capable;
 		dwc->dr_mode = pdata->dr_mode;
 
 		dwc->disable_scramble_quirk = pdata->disable_scramble_quirk;
diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h
index d201910b892f..fdab715a0631 100644
--- a/drivers/usb/dwc3/core.h
+++ b/drivers/usb/dwc3/core.h
@@ -689,6 +689,7 @@ struct dwc3_scratchpad_array {
  * @setup_packet_pending: true when there's a Setup Packet in FIFO. Workaround
  * @start_config_issued: true when StartConfig command has been issued
  * @three_stage_setup: set if we perform a three phase setup
+ * @usb3_lpm_capable: set if hadrware supports Link Power Management
  * @disable_scramble_quirk: set if we enable the disable scramble quirk
  * @u2exit_lfps_quirk: set if we enable u2exit lfps quirk
  * @u2ss_inp3_quirk: set if we enable P3 OK for U2/SS Inactive quirk
@@ -812,6 +813,7 @@ struct dwc3 {
 	unsigned		setup_packet_pending:1;
 	unsigned		start_config_issued:1;
 	unsigned		three_stage_setup:1;
+	unsigned		usb3_lpm_capable:1;
 
 	unsigned		disable_scramble_quirk:1;
 	unsigned		u2exit_lfps_quirk:1;
diff --git a/drivers/usb/dwc3/host.c b/drivers/usb/dwc3/host.c
index 12bfd3c5405e..c679f63783ae 100644
--- a/drivers/usb/dwc3/host.c
+++ b/drivers/usb/dwc3/host.c
@@ -49,9 +49,7 @@ int dwc3_host_init(struct dwc3 *dwc)
 
 	memset(&pdata, 0, sizeof(pdata));
 
-#ifdef CONFIG_DWC3_HOST_USB3_LPM_ENABLE
-	pdata.usb3_lpm_capable = 1;
-#endif
+	pdata.usb3_lpm_capable = dwc->usb3_lpm_capable;
 
 	ret = platform_device_add_data(xhci, &pdata, sizeof(pdata));
 	if (ret) {
diff --git a/drivers/usb/dwc3/platform_data.h b/drivers/usb/dwc3/platform_data.h
index a3a3b6d5668c..a2bd464be828 100644
--- a/drivers/usb/dwc3/platform_data.h
+++ b/drivers/usb/dwc3/platform_data.h
@@ -24,6 +24,7 @@ struct dwc3_platform_data {
 	enum usb_device_speed maximum_speed;
 	enum usb_dr_mode dr_mode;
 	bool tx_fifo_resize;
+	bool usb3_lpm_capable;
 
 	unsigned is_utmi_l1_suspend:1;
 	u8 hird_threshold;
-- 
cgit v1.2.3-59-g8ed1b


From 232c0102e84b7fce634c8902a5fa30ca2b3342ac Mon Sep 17 00:00:00 2001
From: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
Date: Tue, 3 Mar 2015 10:52:04 +0100
Subject: usb: gadget: composite: don't try standard handling for non-standard
 requests

If a non-standard request is processed and its parameters just happen
to match those of some standard request, the logic of composite_setup()
can be fooled, so don't even try any switch cases, just go to the
proper place where unknown requests are handled.

Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
---
 drivers/usb/gadget/composite.c | 7 +++++++
 1 file changed, 7 insertions(+)

(limited to 'drivers/usb')

diff --git a/drivers/usb/gadget/composite.c b/drivers/usb/gadget/composite.c
index 13adfd1a3f54..9fb92310fb2b 100644
--- a/drivers/usb/gadget/composite.c
+++ b/drivers/usb/gadget/composite.c
@@ -1472,6 +1472,13 @@ composite_setup(struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl)
 	req->length = 0;
 	gadget->ep0->driver_data = cdev;
 
+	/*
+	 * Don't let non-standard requests match any of the cases below
+	 * by accident.
+	 */
+	if ((ctrl->bRequestType & USB_TYPE_MASK) != USB_TYPE_STANDARD)
+		goto unknown;
+
 	switch (ctrl->bRequest) {
 
 	/* we handle all standard USB descriptors */
-- 
cgit v1.2.3-59-g8ed1b


From eb132ccbdec5df46e29c9814adf76075ce83576b Mon Sep 17 00:00:00 2001
From: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
Date: Tue, 3 Mar 2015 10:52:05 +0100
Subject: usb: gadget: printer: enqueue printer's response for setup request

Function-specific setup requests should be handled in such a way, that
apart from filling in the data buffer, the requests are also actually
enqueued: if function-specific setup is called from composte_setup(),
the "usb_ep_queue()" block of code in composite_setup() is skipped.

The printer function lacks this part and it results in e.g. get device id
requests failing: the host expects some response, the device prepares it
but does not equeue it for sending to the host, so the host finally asserts
timeout.

This patch adds enqueueing the prepared responses.

Cc: <stable@vger.kernel.org> # v3.4+
Fixes: 2e87edf49227: "usb: gadget: make g_printer use composite"
Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
---
 drivers/usb/gadget/legacy/printer.c | 9 +++++++++
 1 file changed, 9 insertions(+)

(limited to 'drivers/usb')

diff --git a/drivers/usb/gadget/legacy/printer.c b/drivers/usb/gadget/legacy/printer.c
index 90545980542f..6385c198c134 100644
--- a/drivers/usb/gadget/legacy/printer.c
+++ b/drivers/usb/gadget/legacy/printer.c
@@ -1031,6 +1031,15 @@ unknown:
 		break;
 	}
 	/* host either stalls (value < 0) or reports success */
+	if (value >= 0) {
+		req->length = value;
+		req->zero = value < wLength;
+		value = usb_ep_queue(cdev->gadget->ep0, req, GFP_ATOMIC);
+		if (value < 0) {
+			ERROR(dev, "%s:%d Error!\n", __func__, __LINE__);
+			req->status = 0;
+		}
+	}
 	return value;
 }
 
-- 
cgit v1.2.3-59-g8ed1b


From 050f571264154b2f5b4c3c4c1581ab365064ff28 Mon Sep 17 00:00:00 2001
From: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
Date: Tue, 3 Mar 2015 10:52:06 +0100
Subject: usb: gadget: printer: remove unused and empty printer_unbind

The unbind() method is optional is usb_composite_driver.
In this particular driver the method does nothing so it can be removed.

Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
---
 drivers/usb/gadget/legacy/printer.c | 6 ------
 1 file changed, 6 deletions(-)

(limited to 'drivers/usb')

diff --git a/drivers/usb/gadget/legacy/printer.c b/drivers/usb/gadget/legacy/printer.c
index 6385c198c134..21ea317d2a43 100644
--- a/drivers/usb/gadget/legacy/printer.c
+++ b/drivers/usb/gadget/legacy/printer.c
@@ -1288,11 +1288,6 @@ fail:
 	return status;
 }
 
-static int printer_unbind(struct usb_composite_dev *cdev)
-{
-	return 0;
-}
-
 static int __init printer_bind(struct usb_composite_dev *cdev)
 {
 	int ret;
@@ -1317,7 +1312,6 @@ static __refdata struct usb_composite_driver printer_driver = {
 	.strings        = dev_strings,
 	.max_speed      = USB_SPEED_SUPER,
 	.bind		= printer_bind,
-	.unbind		= printer_unbind,
 };
 
 static int __init
-- 
cgit v1.2.3-59-g8ed1b


From c69b8186945c10d245586e9f9703486e9574170c Mon Sep 17 00:00:00 2001
From: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
Date: Tue, 3 Mar 2015 10:52:07 +0100
Subject: usb: gadget: printer: eliminate random pointer dereference

struct printer_dev contains 3 list heads: tx_reqs, rx_reqs and rx_buffers.
There is just one instance of this structure in the driver and it is
file static, and as such initialized with all zeros.

If device_create() or cdev_add() fails then "goto fail" branch is taken,
which results in printer_cfg_unbind() call. The latter checks if
tx_reqs, rx_reqs and rx_buffers lists are empty. The check for emptiness
is in fact a check whether the "next" member of struct list_head points
to the head of the list. But the heads of the lists in question have
not been initialized yet and, as mentioned above, contain all zeros,
so list_empty() returns false and respective "while" loop body starts
executing. Here, container_of() just subtracts the offset of a struct
usb_request member from an address of this same member, which results in
a value somewhere near 0 or 0xfff...ff. And the argument to list_del()
dereferences such a pointer which causes a disaster.

This patch moves respective INIT_LIST_HEAD() invocations to a point before
"goto fail" branch can be taken.

Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
---
 drivers/usb/gadget/legacy/printer.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

(limited to 'drivers/usb')

diff --git a/drivers/usb/gadget/legacy/printer.c b/drivers/usb/gadget/legacy/printer.c
index 21ea317d2a43..12247d3fe768 100644
--- a/drivers/usb/gadget/legacy/printer.c
+++ b/drivers/usb/gadget/legacy/printer.c
@@ -1190,6 +1190,9 @@ static int __init printer_bind_config(struct usb_configuration *c)
 	dev->function.unbind = printer_func_unbind;
 	dev->function.set_alt = printer_func_set_alt;
 	dev->function.disable = printer_func_disable;
+	INIT_LIST_HEAD(&dev->tx_reqs);
+	INIT_LIST_HEAD(&dev->rx_reqs);
+	INIT_LIST_HEAD(&dev->rx_buffers);
 
 	status = usb_add_function(c, &dev->function);
 	if (status)
@@ -1233,11 +1236,8 @@ static int __init printer_bind_config(struct usb_configuration *c)
 
 	spin_lock_init(&dev->lock);
 	mutex_init(&dev->lock_printer_io);
-	INIT_LIST_HEAD(&dev->tx_reqs);
 	INIT_LIST_HEAD(&dev->tx_reqs_active);
-	INIT_LIST_HEAD(&dev->rx_reqs);
 	INIT_LIST_HEAD(&dev->rx_reqs_active);
-	INIT_LIST_HEAD(&dev->rx_buffers);
 	init_waitqueue_head(&dev->rx_wait);
 	init_waitqueue_head(&dev->tx_wait);
 	init_waitqueue_head(&dev->tx_flush_wait);
-- 
cgit v1.2.3-59-g8ed1b


From f5bda0034fba942adf5555246e248ddb66c76052 Mon Sep 17 00:00:00 2001
From: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
Date: Tue, 3 Mar 2015 10:52:08 +0100
Subject: usb: gadget: printer: revert usb_add_function() effect in error
 recovery

Whenever the "goto fail" branch is taken, the effect of usb_add_function()
should be reverted.

Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
---
 drivers/usb/gadget/legacy/printer.c | 1 +
 1 file changed, 1 insertion(+)

(limited to 'drivers/usb')

diff --git a/drivers/usb/gadget/legacy/printer.c b/drivers/usb/gadget/legacy/printer.c
index 12247d3fe768..eb02a6b8da08 100644
--- a/drivers/usb/gadget/legacy/printer.c
+++ b/drivers/usb/gadget/legacy/printer.c
@@ -1285,6 +1285,7 @@ static int __init printer_bind_config(struct usb_configuration *c)
 
 fail:
 	printer_cfg_unbind(c);
+	usb_remove_function(c, &dev->function);
 	return status;
 }
 
-- 
cgit v1.2.3-59-g8ed1b


From 44b316525986252bb95d356419fc9e75f0532112 Mon Sep 17 00:00:00 2001
From: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
Date: Tue, 3 Mar 2015 10:52:09 +0100
Subject: usb: gadget: printer: add missing error handling

If cdev_add() in printer_bind_config() fails, care is taken to
reverse the effects of initializations completed until the fail
happens. But if printer_req_alloc() fails, it is just one of the
two lists that is cleaned up while the effects of cdev_add()
and device_create() are not reverted.

This patch changes error handling so that at least as much cleanup is done
as when a failure happens before printer_req_alloc() invocations.

Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
---
 drivers/usb/gadget/legacy/printer.c | 23 +++++------------------
 1 file changed, 5 insertions(+), 18 deletions(-)

(limited to 'drivers/usb')

diff --git a/drivers/usb/gadget/legacy/printer.c b/drivers/usb/gadget/legacy/printer.c
index eb02a6b8da08..bbcd6aa9abd1 100644
--- a/drivers/usb/gadget/legacy/printer.c
+++ b/drivers/usb/gadget/legacy/printer.c
@@ -1249,31 +1249,18 @@ static int __init printer_bind_config(struct usb_configuration *c)
 	dev->current_rx_bytes = 0;
 	dev->current_rx_buf = NULL;
 
+	status = -ENOMEM;
 	for (i = 0; i < QLEN; i++) {
 		req = printer_req_alloc(dev->in_ep, USB_BUFSIZE, GFP_KERNEL);
-		if (!req) {
-			while (!list_empty(&dev->tx_reqs)) {
-				req = container_of(dev->tx_reqs.next,
-						struct usb_request, list);
-				list_del(&req->list);
-				printer_req_free(dev->in_ep, req);
-			}
-			return -ENOMEM;
-		}
+		if (!req)
+			goto fail;
 		list_add(&req->list, &dev->tx_reqs);
 	}
 
 	for (i = 0; i < QLEN; i++) {
 		req = printer_req_alloc(dev->out_ep, USB_BUFSIZE, GFP_KERNEL);
-		if (!req) {
-			while (!list_empty(&dev->rx_reqs)) {
-				req = container_of(dev->rx_reqs.next,
-						struct usb_request, list);
-				list_del(&req->list);
-				printer_req_free(dev->out_ep, req);
-			}
-			return -ENOMEM;
-		}
+		if (!req)
+			goto fail;
 		list_add(&req->list, &dev->rx_reqs);
 	}
 
-- 
cgit v1.2.3-59-g8ed1b


From 44eccced2b9aafd1eced9fb4821f26b6dff26a25 Mon Sep 17 00:00:00 2001
From: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
Date: Tue, 3 Mar 2015 10:52:10 +0100
Subject: usb: gadget: printer: eliminate pdev member of struct printer_dev

The pdev member of struct printer_dev is not used outside
printer_bind_config(), so it can just as well be a local variable there.

Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
---
 drivers/usb/gadget/legacy/printer.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

(limited to 'drivers/usb')

diff --git a/drivers/usb/gadget/legacy/printer.c b/drivers/usb/gadget/legacy/printer.c
index bbcd6aa9abd1..a9c3e5782462 100644
--- a/drivers/usb/gadget/legacy/printer.c
+++ b/drivers/usb/gadget/legacy/printer.c
@@ -83,7 +83,6 @@ struct printer_dev {
 	u8			printer_status;
 	u8			reset_printer;
 	struct cdev		printer_cdev;
-	struct device		*pdev;
 	u8			printer_cdev_open;
 	wait_queue_head_t	wait;
 	struct usb_function	function;
@@ -1175,6 +1174,7 @@ static int __init printer_bind_config(struct usb_configuration *c)
 {
 	struct usb_gadget	*gadget = c->cdev->gadget;
 	struct printer_dev	*dev;
+	struct device		*pdev;
 	int			status = -ENOMEM;
 	size_t			len;
 	u32			i;
@@ -1199,11 +1199,11 @@ static int __init printer_bind_config(struct usb_configuration *c)
 		return status;
 
 	/* Setup the sysfs files for the printer gadget. */
-	dev->pdev = device_create(usb_gadget_class, NULL, g_printer_devno,
+	pdev = device_create(usb_gadget_class, NULL, g_printer_devno,
 				  NULL, "g_printer");
-	if (IS_ERR(dev->pdev)) {
+	if (IS_ERR(pdev)) {
 		ERROR(dev, "Failed to create device: g_printer\n");
-		status = PTR_ERR(dev->pdev);
+		status = PTR_ERR(pdev);
 		goto fail;
 	}
 
-- 
cgit v1.2.3-59-g8ed1b


From 406be2ccbadb5652f5894078d0e025d90683b3e9 Mon Sep 17 00:00:00 2001
From: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
Date: Tue, 3 Mar 2015 10:52:11 +0100
Subject: usb: gadget: printer: follow the naming convention for usb_add_config
 callback

Legacy gadgets, before converting them to the new function framework,
used to use the name <something>_do_config() for usb_add_config()'s
callback.

This patch changes the name so that it is easier to follow
the convention.

Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
---
 drivers/usb/gadget/legacy/printer.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'drivers/usb')

diff --git a/drivers/usb/gadget/legacy/printer.c b/drivers/usb/gadget/legacy/printer.c
index a9c3e5782462..c86583317431 100644
--- a/drivers/usb/gadget/legacy/printer.c
+++ b/drivers/usb/gadget/legacy/printer.c
@@ -1170,7 +1170,7 @@ static struct usb_configuration printer_cfg_driver = {
 	.bmAttributes		= USB_CONFIG_ATT_ONE | USB_CONFIG_ATT_SELFPOWER,
 };
 
-static int __init printer_bind_config(struct usb_configuration *c)
+static int __init printer_do_config(struct usb_configuration *c)
 {
 	struct usb_gadget	*gadget = c->cdev->gadget;
 	struct printer_dev	*dev;
@@ -1287,7 +1287,7 @@ static int __init printer_bind(struct usb_composite_dev *cdev)
 	device_desc.iProduct = strings[USB_GADGET_PRODUCT_IDX].id;
 	device_desc.iSerialNumber = strings[USB_GADGET_SERIAL_IDX].id;
 
-	ret = usb_add_config(cdev, &printer_cfg_driver, printer_bind_config);
+	ret = usb_add_config(cdev, &printer_cfg_driver, printer_do_config);
 	if (ret)
 		return ret;
 	usb_composite_overwrite_options(cdev, &coverwrite);
-- 
cgit v1.2.3-59-g8ed1b


From ae2dd0de57a3f6b12e30e5552033a492d6d206f7 Mon Sep 17 00:00:00 2001
From: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
Date: Tue, 3 Mar 2015 10:52:12 +0100
Subject: usb: gadget: printer: standardize printer_do_config

Follow the convention of distributing source code between
<something>_do_config() and <something>_bind_config().

Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
---
 drivers/usb/gadget/legacy/printer.c | 39 +++++++++++++++++++++++--------------
 1 file changed, 24 insertions(+), 15 deletions(-)

(limited to 'drivers/usb')

diff --git a/drivers/usb/gadget/legacy/printer.c b/drivers/usb/gadget/legacy/printer.c
index c86583317431..494cd8a5aca4 100644
--- a/drivers/usb/gadget/legacy/printer.c
+++ b/drivers/usb/gadget/legacy/printer.c
@@ -1170,7 +1170,8 @@ static struct usb_configuration printer_cfg_driver = {
 	.bmAttributes		= USB_CONFIG_ATT_ONE | USB_CONFIG_ATT_SELFPOWER,
 };
 
-static int __init printer_do_config(struct usb_configuration *c)
+static int f_printer_bind_config(struct usb_configuration *c, char *pnp_str,
+				 unsigned q_len)
 {
 	struct usb_gadget	*gadget = c->cdev->gadget;
 	struct printer_dev	*dev;
@@ -1180,8 +1181,6 @@ static int __init printer_do_config(struct usb_configuration *c)
 	u32			i;
 	struct usb_request	*req;
 
-	usb_ep_autoconfig_reset(gadget);
-
 	dev = &usb_printer_gadget;
 
 	dev->function.name = shortname;
@@ -1219,21 +1218,13 @@ static int __init printer_do_config(struct usb_configuration *c)
 		goto fail;
 	}
 
-	if (iPNPstring)
-		strlcpy(&pnp_string[2], iPNPstring, (sizeof pnp_string)-2);
+	if (pnp_str)
+		strlcpy(&pnp_string[2], pnp_str, sizeof(pnp_string) - 2);
 
 	len = strlen(pnp_string);
 	pnp_string[0] = (len >> 8) & 0xFF;
 	pnp_string[1] = len & 0xFF;
 
-	usb_gadget_set_selfpowered(gadget);
-
-	if (gadget_is_otg(gadget)) {
-		otg_descriptor.bmAttributes |= USB_OTG_HNP;
-		printer_cfg_driver.descriptors = otg_desc;
-		printer_cfg_driver.bmAttributes |= USB_CONFIG_ATT_WAKEUP;
-	}
-
 	spin_lock_init(&dev->lock);
 	mutex_init(&dev->lock_printer_io);
 	INIT_LIST_HEAD(&dev->tx_reqs_active);
@@ -1250,14 +1241,14 @@ static int __init printer_do_config(struct usb_configuration *c)
 	dev->current_rx_buf = NULL;
 
 	status = -ENOMEM;
-	for (i = 0; i < QLEN; i++) {
+	for (i = 0; i < q_len; i++) {
 		req = printer_req_alloc(dev->in_ep, USB_BUFSIZE, GFP_KERNEL);
 		if (!req)
 			goto fail;
 		list_add(&req->list, &dev->tx_reqs);
 	}
 
-	for (i = 0; i < QLEN; i++) {
+	for (i = 0; i < q_len; i++) {
 		req = printer_req_alloc(dev->out_ep, USB_BUFSIZE, GFP_KERNEL);
 		if (!req)
 			goto fail;
@@ -1276,6 +1267,24 @@ fail:
 	return status;
 }
 
+static int __init printer_do_config(struct usb_configuration *c)
+{
+	struct usb_gadget	*gadget = c->cdev->gadget;
+
+	usb_ep_autoconfig_reset(gadget);
+
+	usb_gadget_set_selfpowered(gadget);
+
+	if (gadget_is_otg(gadget)) {
+		otg_descriptor.bmAttributes |= USB_OTG_HNP;
+		printer_cfg_driver.descriptors = otg_desc;
+		printer_cfg_driver.bmAttributes |= USB_CONFIG_ATT_WAKEUP;
+	}
+
+	return f_printer_bind_config(c, iPNPstring, QLEN);
+
+}
+
 static int __init printer_bind(struct usb_composite_dev *cdev)
 {
 	int ret;
-- 
cgit v1.2.3-59-g8ed1b


From 4504b5a0b22e26a7213d9e08706303a790f5a400 Mon Sep 17 00:00:00 2001
From: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
Date: Tue, 3 Mar 2015 10:52:13 +0100
Subject: usb: gadget: printer: move function-related bind code to function's
 bind

In order to factor out a reusable f_printer.c, the code related to the
function should be placed in functions related to the function.

Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
---
 drivers/usb/gadget/legacy/printer.c | 114 +++++++++++++++++++++---------------
 1 file changed, 66 insertions(+), 48 deletions(-)

(limited to 'drivers/usb')

diff --git a/drivers/usb/gadget/legacy/printer.c b/drivers/usb/gadget/legacy/printer.c
index 494cd8a5aca4..c8570441a303 100644
--- a/drivers/usb/gadget/legacy/printer.c
+++ b/drivers/usb/gadget/legacy/printer.c
@@ -85,6 +85,7 @@ struct printer_dev {
 	struct cdev		printer_cdev;
 	u8			printer_cdev_open;
 	wait_queue_head_t	wait;
+	unsigned		q_len;
 	struct usb_function	function;
 };
 
@@ -1045,18 +1046,25 @@ unknown:
 static int __init printer_func_bind(struct usb_configuration *c,
 		struct usb_function *f)
 {
+	struct usb_gadget *gadget = c->cdev->gadget;
 	struct printer_dev *dev = container_of(f, struct printer_dev, function);
+	struct device *pdev;
 	struct usb_composite_dev *cdev = c->cdev;
 	struct usb_ep *in_ep;
 	struct usb_ep *out_ep = NULL;
+	struct usb_request *req;
 	int id;
 	int ret;
+	u32 i;
 
 	id = usb_interface_id(c, f);
 	if (id < 0)
 		return id;
 	intf_desc.bInterfaceNumber = id;
 
+	/* finish hookup to lower layer ... */
+	dev->gadget = gadget;
+
 	/* all we really need is bulk IN/OUT */
 	in_ep = usb_ep_autoconfig(cdev->gadget, &fs_ep_in_desc);
 	if (!in_ep) {
@@ -1085,7 +1093,64 @@ autoconf_fail:
 
 	dev->in_ep = in_ep;
 	dev->out_ep = out_ep;
+
+	ret = -ENOMEM;
+	for (i = 0; i < dev->q_len; i++) {
+		req = printer_req_alloc(dev->in_ep, USB_BUFSIZE, GFP_KERNEL);
+		if (!req)
+			goto fail_tx_reqs;
+		list_add(&req->list, &dev->tx_reqs);
+	}
+
+	for (i = 0; i < dev->q_len; i++) {
+		req = printer_req_alloc(dev->out_ep, USB_BUFSIZE, GFP_KERNEL);
+		if (!req)
+			goto fail_rx_reqs;
+		list_add(&req->list, &dev->rx_reqs);
+	}
+
+	/* Setup the sysfs files for the printer gadget. */
+	pdev = device_create(usb_gadget_class, NULL, g_printer_devno,
+				  NULL, "g_printer");
+	if (IS_ERR(pdev)) {
+		ERROR(dev, "Failed to create device: g_printer\n");
+		ret = PTR_ERR(pdev);
+		goto fail_rx_reqs;
+	}
+
+	/*
+	 * Register a character device as an interface to a user mode
+	 * program that handles the printer specific functionality.
+	 */
+	cdev_init(&dev->printer_cdev, &printer_io_operations);
+	dev->printer_cdev.owner = THIS_MODULE;
+	ret = cdev_add(&dev->printer_cdev, g_printer_devno, 1);
+	if (ret) {
+		ERROR(dev, "Failed to open char device\n");
+		goto fail_cdev_add;
+	}
+
 	return 0;
+
+fail_cdev_add:
+	device_destroy(usb_gadget_class, g_printer_devno);
+
+fail_rx_reqs:
+	while (!list_empty(&dev->rx_reqs)) {
+		req = container_of(dev->rx_reqs.next, struct usb_request, list);
+		list_del(&req->list);
+		printer_req_free(dev->out_ep, req);
+	}
+
+fail_tx_reqs:
+	while (!list_empty(&dev->tx_reqs)) {
+		req = container_of(dev->tx_reqs.next, struct usb_request, list);
+		list_del(&req->list);
+		printer_req_free(dev->in_ep, req);
+	}
+
+	return ret;
+
 }
 
 static void printer_func_unbind(struct usb_configuration *c,
@@ -1173,13 +1238,9 @@ static struct usb_configuration printer_cfg_driver = {
 static int f_printer_bind_config(struct usb_configuration *c, char *pnp_str,
 				 unsigned q_len)
 {
-	struct usb_gadget	*gadget = c->cdev->gadget;
 	struct printer_dev	*dev;
-	struct device		*pdev;
 	int			status = -ENOMEM;
 	size_t			len;
-	u32			i;
-	struct usb_request	*req;
 
 	dev = &usb_printer_gadget;
 
@@ -1193,31 +1254,11 @@ static int f_printer_bind_config(struct usb_configuration *c, char *pnp_str,
 	INIT_LIST_HEAD(&dev->rx_reqs);
 	INIT_LIST_HEAD(&dev->rx_buffers);
 
+	dev->q_len = q_len;
 	status = usb_add_function(c, &dev->function);
 	if (status)
 		return status;
 
-	/* Setup the sysfs files for the printer gadget. */
-	pdev = device_create(usb_gadget_class, NULL, g_printer_devno,
-				  NULL, "g_printer");
-	if (IS_ERR(pdev)) {
-		ERROR(dev, "Failed to create device: g_printer\n");
-		status = PTR_ERR(pdev);
-		goto fail;
-	}
-
-	/*
-	 * Register a character device as an interface to a user mode
-	 * program that handles the printer specific functionality.
-	 */
-	cdev_init(&dev->printer_cdev, &printer_io_operations);
-	dev->printer_cdev.owner = THIS_MODULE;
-	status = cdev_add(&dev->printer_cdev, g_printer_devno, 1);
-	if (status) {
-		ERROR(dev, "Failed to open char device\n");
-		goto fail;
-	}
-
 	if (pnp_str)
 		strlcpy(&pnp_string[2], pnp_str, sizeof(pnp_string) - 2);
 
@@ -1240,31 +1281,8 @@ static int f_printer_bind_config(struct usb_configuration *c, char *pnp_str,
 	dev->current_rx_bytes = 0;
 	dev->current_rx_buf = NULL;
 
-	status = -ENOMEM;
-	for (i = 0; i < q_len; i++) {
-		req = printer_req_alloc(dev->in_ep, USB_BUFSIZE, GFP_KERNEL);
-		if (!req)
-			goto fail;
-		list_add(&req->list, &dev->tx_reqs);
-	}
-
-	for (i = 0; i < q_len; i++) {
-		req = printer_req_alloc(dev->out_ep, USB_BUFSIZE, GFP_KERNEL);
-		if (!req)
-			goto fail;
-		list_add(&req->list, &dev->rx_reqs);
-	}
-
-	/* finish hookup to lower layer ... */
-	dev->gadget = gadget;
-
 	INFO(dev, "%s, version: " DRIVER_VERSION "\n", driver_desc);
 	return 0;
-
-fail:
-	printer_cfg_unbind(c);
-	usb_remove_function(c, &dev->function);
-	return status;
 }
 
 static int __init printer_do_config(struct usb_configuration *c)
-- 
cgit v1.2.3-59-g8ed1b


From cee5cbff8d80ec2d10fe8070f229e95cc42443bf Mon Sep 17 00:00:00 2001
From: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
Date: Tue, 3 Mar 2015 10:52:14 +0100
Subject: usb: gadget: printer: call usb_add_function() last

Conversion to the new function interface requires splitting a
<something>_bind_config() function into two parts: allocation of
container_of struct usb_function and invocation of usb_add_function().
This patch moves the latter to the end of the f_printer_bind_config()
in order to enable conversion to the new interface.

Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
---
 drivers/usb/gadget/legacy/printer.c | 9 ++++-----
 1 file changed, 4 insertions(+), 5 deletions(-)

(limited to 'drivers/usb')

diff --git a/drivers/usb/gadget/legacy/printer.c b/drivers/usb/gadget/legacy/printer.c
index c8570441a303..5dbb93a91512 100644
--- a/drivers/usb/gadget/legacy/printer.c
+++ b/drivers/usb/gadget/legacy/printer.c
@@ -1254,11 +1254,6 @@ static int f_printer_bind_config(struct usb_configuration *c, char *pnp_str,
 	INIT_LIST_HEAD(&dev->rx_reqs);
 	INIT_LIST_HEAD(&dev->rx_buffers);
 
-	dev->q_len = q_len;
-	status = usb_add_function(c, &dev->function);
-	if (status)
-		return status;
-
 	if (pnp_str)
 		strlcpy(&pnp_string[2], pnp_str, sizeof(pnp_string) - 2);
 
@@ -1280,7 +1275,11 @@ static int f_printer_bind_config(struct usb_configuration *c, char *pnp_str,
 	dev->current_rx_req = NULL;
 	dev->current_rx_bytes = 0;
 	dev->current_rx_buf = NULL;
+	dev->q_len = q_len;
 
+	status = usb_add_function(c, &dev->function);
+	if (status)
+		return status;
 	INFO(dev, "%s, version: " DRIVER_VERSION "\n", driver_desc);
 	return 0;
 }
-- 
cgit v1.2.3-59-g8ed1b


From 991cd26249e775c07347ab4d62adfbc3284e7704 Mon Sep 17 00:00:00 2001
From: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
Date: Tue, 3 Mar 2015 10:52:15 +0100
Subject: usb: gadget: printer: move function-related unbind code to function's
 unbind

In order to factor out a reusable f_printer.c, the code related to the
function should be placed in functions related to the function.

printer_cfg_unbind() becomes empty, so it is removed.

Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
---
 drivers/usb/gadget/legacy/printer.c | 58 ++++++++++++++++---------------------
 1 file changed, 25 insertions(+), 33 deletions(-)

(limited to 'drivers/usb')

diff --git a/drivers/usb/gadget/legacy/printer.c b/drivers/usb/gadget/legacy/printer.c
index 5dbb93a91512..84e6cdd72137 100644
--- a/drivers/usb/gadget/legacy/printer.c
+++ b/drivers/usb/gadget/legacy/printer.c
@@ -1155,44 +1155,12 @@ fail_tx_reqs:
 
 static void printer_func_unbind(struct usb_configuration *c,
 		struct usb_function *f)
-{
-	usb_free_all_descriptors(f);
-}
-
-static int printer_func_set_alt(struct usb_function *f,
-		unsigned intf, unsigned alt)
-{
-	struct printer_dev *dev = container_of(f, struct printer_dev, function);
-	int ret = -ENOTSUPP;
-
-	if (!alt)
-		ret = set_interface(dev, intf);
-
-	return ret;
-}
-
-static void printer_func_disable(struct usb_function *f)
-{
-	struct printer_dev *dev = container_of(f, struct printer_dev, function);
-	unsigned long		flags;
-
-	DBG(dev, "%s\n", __func__);
-
-	spin_lock_irqsave(&dev->lock, flags);
-	printer_reset_interface(dev);
-	spin_unlock_irqrestore(&dev->lock, flags);
-}
-
-static void printer_cfg_unbind(struct usb_configuration *c)
 {
 	struct printer_dev	*dev;
 	struct usb_request	*req;
 
 	dev = &usb_printer_gadget;
 
-	DBG(dev, "%s\n", __func__);
-
-	/* Remove sysfs files */
 	device_destroy(usb_gadget_class, g_printer_devno);
 
 	/* Remove Character Device */
@@ -1226,11 +1194,35 @@ static void printer_cfg_unbind(struct usb_configuration *c)
 		list_del(&req->list);
 		printer_req_free(dev->out_ep, req);
 	}
+	usb_free_all_descriptors(f);
+}
+
+static int printer_func_set_alt(struct usb_function *f,
+		unsigned intf, unsigned alt)
+{
+	struct printer_dev *dev = container_of(f, struct printer_dev, function);
+	int ret = -ENOTSUPP;
+
+	if (!alt)
+		ret = set_interface(dev, intf);
+
+	return ret;
+}
+
+static void printer_func_disable(struct usb_function *f)
+{
+	struct printer_dev *dev = container_of(f, struct printer_dev, function);
+	unsigned long		flags;
+
+	DBG(dev, "%s\n", __func__);
+
+	spin_lock_irqsave(&dev->lock, flags);
+	printer_reset_interface(dev);
+	spin_unlock_irqrestore(&dev->lock, flags);
 }
 
 static struct usb_configuration printer_cfg_driver = {
 	.label			= "printer",
-	.unbind			= printer_cfg_unbind,
 	.bConfigurationValue	= 1,
 	.bmAttributes		= USB_CONFIG_ATT_ONE | USB_CONFIG_ATT_SELFPOWER,
 };
-- 
cgit v1.2.3-59-g8ed1b


From 085617a1eb865c2987c05652bf82d35f500ac4b4 Mon Sep 17 00:00:00 2001
From: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
Date: Tue, 3 Mar 2015 10:52:16 +0100
Subject: usb: gadget: printer: define pnp string buffer length

Avoid using magic numbers.

Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
---
 drivers/usb/gadget/legacy/printer.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

(limited to 'drivers/usb')

diff --git a/drivers/usb/gadget/legacy/printer.c b/drivers/usb/gadget/legacy/printer.c
index 84e6cdd72137..db5e2f0681c7 100644
--- a/drivers/usb/gadget/legacy/printer.c
+++ b/drivers/usb/gadget/legacy/printer.c
@@ -276,9 +276,11 @@ static inline struct usb_endpoint_descriptor *ep_desc(struct usb_gadget *gadget,
 
 /* descriptors that are built on-demand */
 
+#define PNP_STRING_LEN			1024
+
 static char				product_desc [40] = DRIVER_DESC;
 static char				serial_num [40] = "1";
-static char				pnp_string [1024] =
+static char				pnp_string[PNP_STRING_LEN] =
 	"XXMFG:linux;MDL:g_printer;CLS:PRINTER;SN:1;";
 
 /* static strings, in UTF-8 */
@@ -1247,7 +1249,7 @@ static int f_printer_bind_config(struct usb_configuration *c, char *pnp_str,
 	INIT_LIST_HEAD(&dev->rx_buffers);
 
 	if (pnp_str)
-		strlcpy(&pnp_string[2], pnp_str, sizeof(pnp_string) - 2);
+		strlcpy(&pnp_string[2], pnp_str, PNP_STRING_LEN - 2);
 
 	len = strlen(pnp_string);
 	pnp_string[0] = (len >> 8) & 0xFF;
-- 
cgit v1.2.3-59-g8ed1b


From 5a84e6f608598dd691c0024eab50fffb96aca43b Mon Sep 17 00:00:00 2001
From: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
Date: Tue, 3 Mar 2015 10:52:17 +0100
Subject: usb: gadget: printer: don't access file global pnp_string in
 function's code

In order to factor out a reusable f_printer, the function's code should
not use file global variables related to legacy printer gadget's
implementation.

Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
---
 drivers/usb/gadget/legacy/printer.c | 14 ++++++++------
 1 file changed, 8 insertions(+), 6 deletions(-)

(limited to 'drivers/usb')

diff --git a/drivers/usb/gadget/legacy/printer.c b/drivers/usb/gadget/legacy/printer.c
index db5e2f0681c7..42c46da6f59f 100644
--- a/drivers/usb/gadget/legacy/printer.c
+++ b/drivers/usb/gadget/legacy/printer.c
@@ -86,6 +86,7 @@ struct printer_dev {
 	u8			printer_cdev_open;
 	wait_queue_head_t	wait;
 	unsigned		q_len;
+	char			*pnp_string;	/* We don't own memory! */
 	struct usb_function	function;
 };
 
@@ -994,10 +995,10 @@ static int printer_func_setup(struct usb_function *f,
 			if ((wIndex>>8) != dev->interface)
 				break;
 
-			value = (pnp_string[0]<<8)|pnp_string[1];
-			memcpy(req->buf, pnp_string, value);
+			value = (dev->pnp_string[0] << 8) | dev->pnp_string[1];
+			memcpy(req->buf, dev->pnp_string, value);
 			DBG(dev, "1284 PNP String: %x %s\n", value,
-					&pnp_string[2]);
+					&dev->pnp_string[2]);
 			break;
 
 		case 1: /* Get Port Status */
@@ -1230,13 +1231,14 @@ static struct usb_configuration printer_cfg_driver = {
 };
 
 static int f_printer_bind_config(struct usb_configuration *c, char *pnp_str,
-				 unsigned q_len)
+				 char *pnp_string, unsigned q_len)
 {
 	struct printer_dev	*dev;
 	int			status = -ENOMEM;
 	size_t			len;
 
 	dev = &usb_printer_gadget;
+	dev->pnp_string = pnp_string;
 
 	dev->function.name = shortname;
 	dev->function.bind = printer_func_bind;
@@ -1249,7 +1251,7 @@ static int f_printer_bind_config(struct usb_configuration *c, char *pnp_str,
 	INIT_LIST_HEAD(&dev->rx_buffers);
 
 	if (pnp_str)
-		strlcpy(&pnp_string[2], pnp_str, PNP_STRING_LEN - 2);
+		strlcpy(&dev->pnp_string[2], pnp_str, PNP_STRING_LEN - 2);
 
 	len = strlen(pnp_string);
 	pnp_string[0] = (len >> 8) & 0xFF;
@@ -1292,7 +1294,7 @@ static int __init printer_do_config(struct usb_configuration *c)
 		printer_cfg_driver.bmAttributes |= USB_CONFIG_ATT_WAKEUP;
 	}
 
-	return f_printer_bind_config(c, iPNPstring, QLEN);
+	return f_printer_bind_config(c, iPNPstring, pnp_string, QLEN);
 
 }
 
-- 
cgit v1.2.3-59-g8ed1b


From d82cd82edb98d727c6a0804a6e271e3081559404 Mon Sep 17 00:00:00 2001
From: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
Date: Tue, 3 Mar 2015 10:52:18 +0100
Subject: usb: gadget: printer: add setup and cleanup functions

Factor out gprinter_setup() and gprinter_cleanup() so that it is
easy to change the place they are called from.

Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
---
 drivers/usb/gadget/legacy/printer.c | 46 +++++++++++++++++++++++++------------
 1 file changed, 31 insertions(+), 15 deletions(-)

(limited to 'drivers/usb')

diff --git a/drivers/usb/gadget/legacy/printer.c b/drivers/usb/gadget/legacy/printer.c
index 42c46da6f59f..83cea9a5c75e 100644
--- a/drivers/usb/gadget/legacy/printer.c
+++ b/drivers/usb/gadget/legacy/printer.c
@@ -1298,6 +1298,34 @@ static int __init printer_do_config(struct usb_configuration *c)
 
 }
 
+static int gprinter_setup(void)
+{
+	int status;
+
+	usb_gadget_class = class_create(THIS_MODULE, "usb_printer_gadget");
+	if (IS_ERR(usb_gadget_class)) {
+		status = PTR_ERR(usb_gadget_class);
+		pr_err("unable to create usb_gadget class %d\n", status);
+		return status;
+	}
+
+	status = alloc_chrdev_region(&g_printer_devno, 0, 1,
+			"USB printer gadget");
+	if (status) {
+		pr_err("alloc_chrdev_region %d\n", status);
+		class_destroy(usb_gadget_class);
+	}
+
+	return status;
+}
+
+/* must be called with struct printer_dev's lock_printer_io held */
+static void gprinter_cleanup(void)
+{
+	unregister_chrdev_region(g_printer_devno, 1);
+	class_destroy(usb_gadget_class);
+}
+
 static int __init printer_bind(struct usb_composite_dev *cdev)
 {
 	int ret;
@@ -1329,20 +1357,9 @@ init(void)
 {
 	int status;
 
-	usb_gadget_class = class_create(THIS_MODULE, "usb_printer_gadget");
-	if (IS_ERR(usb_gadget_class)) {
-		status = PTR_ERR(usb_gadget_class);
-		pr_err("unable to create usb_gadget class %d\n", status);
-		return status;
-	}
-
-	status = alloc_chrdev_region(&g_printer_devno, 0, 1,
-			"USB printer gadget");
-	if (status) {
-		pr_err("alloc_chrdev_region %d\n", status);
-		class_destroy(usb_gadget_class);
+	status = gprinter_setup();
+	if (status)
 		return status;
-	}
 
 	status = usb_composite_probe(&printer_driver);
 	if (status) {
@@ -1360,8 +1377,7 @@ cleanup(void)
 {
 	mutex_lock(&usb_printer_gadget.lock_printer_io);
 	usb_composite_unregister(&printer_driver);
-	unregister_chrdev_region(g_printer_devno, 1);
-	class_destroy(usb_gadget_class);
+	gprinter_cleanup();
 	mutex_unlock(&usb_printer_gadget.lock_printer_io);
 }
 module_exit(cleanup);
-- 
cgit v1.2.3-59-g8ed1b


From a844715d2fc44adc2da17f90b34cc0d0c1e81596 Mon Sep 17 00:00:00 2001
From: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
Date: Tue, 3 Mar 2015 10:52:19 +0100
Subject: usb: gadget: printer: call gprinter_setup() from gadget's bind

Call gprinter_setup() from gadget's bind instead of module's init.
Call gprinter_cleaup() corerspondingly. This detaches printer function's
logic from legacy printer gadget's implementation.

Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
---
 drivers/usb/gadget/legacy/printer.c | 35 ++++++++++++++++++-----------------
 1 file changed, 18 insertions(+), 17 deletions(-)

(limited to 'drivers/usb')

diff --git a/drivers/usb/gadget/legacy/printer.c b/drivers/usb/gadget/legacy/printer.c
index 83cea9a5c75e..b7889b1f7afa 100644
--- a/drivers/usb/gadget/legacy/printer.c
+++ b/drivers/usb/gadget/legacy/printer.c
@@ -1330,45 +1330,47 @@ static int __init printer_bind(struct usb_composite_dev *cdev)
 {
 	int ret;
 
+	ret = gprinter_setup();
+	if (ret)
+		return ret;
+
 	ret = usb_string_ids_tab(cdev, strings);
-	if (ret < 0)
+	if (ret < 0) {
+		gprinter_cleanup();
 		return ret;
+	}
 	device_desc.iManufacturer = strings[USB_GADGET_MANUFACTURER_IDX].id;
 	device_desc.iProduct = strings[USB_GADGET_PRODUCT_IDX].id;
 	device_desc.iSerialNumber = strings[USB_GADGET_SERIAL_IDX].id;
 
 	ret = usb_add_config(cdev, &printer_cfg_driver, printer_do_config);
-	if (ret)
+	if (ret) {
+		gprinter_cleanup();
 		return ret;
+	}
 	usb_composite_overwrite_options(cdev, &coverwrite);
 	return ret;
 }
 
+static int __exit printer_unbind(struct usb_composite_dev *cdev)
+{
+	gprinter_cleanup();
+	return 0;
+}
+
 static __refdata struct usb_composite_driver printer_driver = {
 	.name           = shortname,
 	.dev            = &device_desc,
 	.strings        = dev_strings,
 	.max_speed      = USB_SPEED_SUPER,
 	.bind		= printer_bind,
+	.unbind		= printer_unbind,
 };
 
 static int __init
 init(void)
 {
-	int status;
-
-	status = gprinter_setup();
-	if (status)
-		return status;
-
-	status = usb_composite_probe(&printer_driver);
-	if (status) {
-		class_destroy(usb_gadget_class);
-		unregister_chrdev_region(g_printer_devno, 1);
-		pr_err("usb_gadget_probe_driver %x\n", status);
-	}
-
-	return status;
+	return usb_composite_probe(&printer_driver);
 }
 module_init(init);
 
@@ -1377,7 +1379,6 @@ cleanup(void)
 {
 	mutex_lock(&usb_printer_gadget.lock_printer_io);
 	usb_composite_unregister(&printer_driver);
-	gprinter_cleanup();
 	mutex_unlock(&usb_printer_gadget.lock_printer_io);
 }
 module_exit(cleanup);
-- 
cgit v1.2.3-59-g8ed1b


From dec81cf1dcaac5b91de7cd32c96aadcb94840c7f Mon Sep 17 00:00:00 2001
From: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
Date: Tue, 3 Mar 2015 10:52:20 +0100
Subject: usb: gadget: printer: eliminate file global printer_mutex

The mutex is a legacy after semi-automatic Big Kernel Lock removal.
printer_open() does its own locking, so no need to duplicate it.

Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
---
 drivers/usb/gadget/legacy/printer.c | 3 ---
 1 file changed, 3 deletions(-)

(limited to 'drivers/usb')

diff --git a/drivers/usb/gadget/legacy/printer.c b/drivers/usb/gadget/legacy/printer.c
index b7889b1f7afa..3206ebcdd7a6 100644
--- a/drivers/usb/gadget/legacy/printer.c
+++ b/drivers/usb/gadget/legacy/printer.c
@@ -48,7 +48,6 @@ USB_GADGET_COMPOSITE_OPTIONS();
 #define DRIVER_DESC		"Printer Gadget"
 #define DRIVER_VERSION		"2007 OCT 06"
 
-static DEFINE_MUTEX(printer_mutex);
 static const char shortname [] = "printer";
 static const char driver_desc [] = DRIVER_DESC;
 
@@ -420,7 +419,6 @@ printer_open(struct inode *inode, struct file *fd)
 	unsigned long		flags;
 	int			ret = -EBUSY;
 
-	mutex_lock(&printer_mutex);
 	dev = container_of(inode->i_cdev, struct printer_dev, printer_cdev);
 
 	spin_lock_irqsave(&dev->lock, flags);
@@ -436,7 +434,6 @@ printer_open(struct inode *inode, struct file *fd)
 	spin_unlock_irqrestore(&dev->lock, flags);
 
 	DBG(dev, "printer_open returned %x\n", ret);
-	mutex_unlock(&printer_mutex);
 	return ret;
 }
 
-- 
cgit v1.2.3-59-g8ed1b


From 8fe20f661f3cfbb6778368eb3c73f8a6438ac640 Mon Sep 17 00:00:00 2001
From: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
Date: Tue, 3 Mar 2015 10:52:21 +0100
Subject: usb: gadget: printer: don't access file global usb_printer_gadget in
 function's code

The printer_dev can be recovered from printer_func_unbind() function's
parameters.

Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
---
 drivers/usb/gadget/legacy/printer.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/usb')

diff --git a/drivers/usb/gadget/legacy/printer.c b/drivers/usb/gadget/legacy/printer.c
index 3206ebcdd7a6..806475c19934 100644
--- a/drivers/usb/gadget/legacy/printer.c
+++ b/drivers/usb/gadget/legacy/printer.c
@@ -1159,7 +1159,7 @@ static void printer_func_unbind(struct usb_configuration *c,
 	struct printer_dev	*dev;
 	struct usb_request	*req;
 
-	dev = &usb_printer_gadget;
+	dev = container_of(f, struct printer_dev, function);
 
 	device_destroy(usb_gadget_class, g_printer_devno);
 
-- 
cgit v1.2.3-59-g8ed1b


From 143d53e10ecfeee7245341aa9c50515b5680ffd4 Mon Sep 17 00:00:00 2001
From: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
Date: Tue, 3 Mar 2015 10:52:22 +0100
Subject: usb: gadget: printer: add container_of helper for printer_dev

5 uses of container_of() in the same context justify wrapping it
in a static inline function.

Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
---
 drivers/usb/gadget/legacy/printer.c | 15 ++++++++++-----
 1 file changed, 10 insertions(+), 5 deletions(-)

(limited to 'drivers/usb')

diff --git a/drivers/usb/gadget/legacy/printer.c b/drivers/usb/gadget/legacy/printer.c
index 806475c19934..955847fe8092 100644
--- a/drivers/usb/gadget/legacy/printer.c
+++ b/drivers/usb/gadget/legacy/printer.c
@@ -89,6 +89,11 @@ struct printer_dev {
 	struct usb_function	function;
 };
 
+static inline struct printer_dev *func_to_printer(struct usb_function *f)
+{
+	return container_of(f, struct printer_dev, function);
+}
+
 static struct printer_dev usb_printer_gadget;
 
 /*-------------------------------------------------------------------------*/
@@ -973,7 +978,7 @@ static void printer_soft_reset(struct printer_dev *dev)
 static int printer_func_setup(struct usb_function *f,
 		const struct usb_ctrlrequest *ctrl)
 {
-	struct printer_dev *dev = container_of(f, struct printer_dev, function);
+	struct printer_dev *dev = func_to_printer(f);
 	struct usb_composite_dev *cdev = f->config->cdev;
 	struct usb_request	*req = cdev->req;
 	int			value = -EOPNOTSUPP;
@@ -1047,7 +1052,7 @@ static int __init printer_func_bind(struct usb_configuration *c,
 		struct usb_function *f)
 {
 	struct usb_gadget *gadget = c->cdev->gadget;
-	struct printer_dev *dev = container_of(f, struct printer_dev, function);
+	struct printer_dev *dev = func_to_printer(f);
 	struct device *pdev;
 	struct usb_composite_dev *cdev = c->cdev;
 	struct usb_ep *in_ep;
@@ -1159,7 +1164,7 @@ static void printer_func_unbind(struct usb_configuration *c,
 	struct printer_dev	*dev;
 	struct usb_request	*req;
 
-	dev = container_of(f, struct printer_dev, function);
+	dev = func_to_printer(f);
 
 	device_destroy(usb_gadget_class, g_printer_devno);
 
@@ -1200,7 +1205,7 @@ static void printer_func_unbind(struct usb_configuration *c,
 static int printer_func_set_alt(struct usb_function *f,
 		unsigned intf, unsigned alt)
 {
-	struct printer_dev *dev = container_of(f, struct printer_dev, function);
+	struct printer_dev *dev = func_to_printer(f);
 	int ret = -ENOTSUPP;
 
 	if (!alt)
@@ -1211,7 +1216,7 @@ static int printer_func_set_alt(struct usb_function *f,
 
 static void printer_func_disable(struct usb_function *f)
 {
-	struct printer_dev *dev = container_of(f, struct printer_dev, function);
+	struct printer_dev *dev = func_to_printer(f);
 	unsigned long		flags;
 
 	DBG(dev, "%s\n", __func__);
-- 
cgit v1.2.3-59-g8ed1b


From f563d230903210acc2336af58e422216b68ded76 Mon Sep 17 00:00:00 2001
From: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
Date: Tue, 3 Mar 2015 10:52:23 +0100
Subject: usb: gadget: composite: add req_match method to usb_function

Non-standard requests can encode the actual interface number in a
non-standard way. For example composite_setup() assumes
that it is w_index && 0xFF, but the printer function encodes the interface
number in a context-dependet way (either w_index or w_index >> 8).
This can lead to such requests being directed to wrong functions.

This patch adds req_match() method to usb_function. Its purpose is to
verify that a given request can be handled by a given function.
If any function within a configuration provides the method and it returns
true, then it is assumed that the right function is found.

If a function uses req_match(), it should try as hard as possible to
determine if the request is meant for it.

If no functions in a configuration provide req_match or none of them
returns true, then fall back to the usual approach.

Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
---
 drivers/usb/gadget/composite.c | 6 +++++-
 include/linux/usb/composite.h  | 3 +++
 2 files changed, 8 insertions(+), 1 deletion(-)

(limited to 'drivers/usb')

diff --git a/drivers/usb/gadget/composite.c b/drivers/usb/gadget/composite.c
index 9fb92310fb2b..4d25e11b1f72 100644
--- a/drivers/usb/gadget/composite.c
+++ b/drivers/usb/gadget/composite.c
@@ -1758,6 +1758,10 @@ unknown:
 		 * take such requests too, if that's ever needed:  to work
 		 * in config 0, etc.
 		 */
+		list_for_each_entry(f, &cdev->config->functions, list)
+			if (f->req_match && f->req_match(f, ctrl))
+				goto try_fun_setup;
+		f = NULL;
 		switch (ctrl->bRequestType & USB_RECIP_MASK) {
 		case USB_RECIP_INTERFACE:
 			if (!cdev->config || intf >= MAX_CONFIG_INTERFACES)
@@ -1775,7 +1779,7 @@ unknown:
 				f = NULL;
 			break;
 		}
-
+try_fun_setup:
 		if (f && f->setup)
 			value = f->setup(f, ctrl);
 		else {
diff --git a/include/linux/usb/composite.h b/include/linux/usb/composite.h
index 3d87defcc527..2511469a9904 100644
--- a/include/linux/usb/composite.h
+++ b/include/linux/usb/composite.h
@@ -148,6 +148,7 @@ struct usb_os_desc_table {
  * @disable: (REQUIRED) Indicates the function should be disabled.  Reasons
  *	include host resetting or reconfiguring the gadget, and disconnection.
  * @setup: Used for interface-specific control requests.
+ * @req_match: Tests if a given class request can be handled by this function.
  * @suspend: Notifies functions when the host stops sending USB traffic.
  * @resume: Notifies functions when the host restarts USB traffic.
  * @get_status: Returns function status as a reply to
@@ -213,6 +214,8 @@ struct usb_function {
 	void			(*disable)(struct usb_function *);
 	int			(*setup)(struct usb_function *,
 					const struct usb_ctrlrequest *);
+	bool			(*req_match)(struct usb_function *,
+					const struct usb_ctrlrequest *);
 	void			(*suspend)(struct usb_function *);
 	void			(*resume)(struct usb_function *);
 
-- 
cgit v1.2.3-59-g8ed1b


From d7239f4c6daeb7a987a0e6f37a3ea24b37f7c208 Mon Sep 17 00:00:00 2001
From: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
Date: Tue, 3 Mar 2015 10:52:24 +0100
Subject: usb: gadget: printer: name class specific requests

Avoid using magic numbers.

Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
---
 drivers/usb/gadget/legacy/printer.c | 9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)

(limited to 'drivers/usb')

diff --git a/drivers/usb/gadget/legacy/printer.c b/drivers/usb/gadget/legacy/printer.c
index 955847fe8092..78f515413e3b 100644
--- a/drivers/usb/gadget/legacy/printer.c
+++ b/drivers/usb/gadget/legacy/printer.c
@@ -47,6 +47,9 @@ USB_GADGET_COMPOSITE_OPTIONS();
 
 #define DRIVER_DESC		"Printer Gadget"
 #define DRIVER_VERSION		"2007 OCT 06"
+#define GET_DEVICE_ID		0
+#define GET_PORT_STATUS		1
+#define SOFT_RESET		2
 
 static const char shortname [] = "printer";
 static const char driver_desc [] = DRIVER_DESC;
@@ -992,7 +995,7 @@ static int printer_func_setup(struct usb_function *f,
 	switch (ctrl->bRequestType&USB_TYPE_MASK) {
 	case USB_TYPE_CLASS:
 		switch (ctrl->bRequest) {
-		case 0: /* Get the IEEE-1284 PNP String */
+		case GET_DEVICE_ID: /* Get the IEEE-1284 PNP String */
 			/* Only one printer interface is supported. */
 			if ((wIndex>>8) != dev->interface)
 				break;
@@ -1003,7 +1006,7 @@ static int printer_func_setup(struct usb_function *f,
 					&dev->pnp_string[2]);
 			break;
 
-		case 1: /* Get Port Status */
+		case GET_PORT_STATUS: /* Get Port Status */
 			/* Only one printer interface is supported. */
 			if (wIndex != dev->interface)
 				break;
@@ -1012,7 +1015,7 @@ static int printer_func_setup(struct usb_function *f,
 			value = min(wLength, (u16) 1);
 			break;
 
-		case 2: /* Soft Reset */
+		case SOFT_RESET: /* Soft Reset */
 			/* Only one printer interface is supported. */
 			if (wIndex != dev->interface)
 				break;
-- 
cgit v1.2.3-59-g8ed1b


From 636bc0ed271d996e18365345e9c00fc712edc610 Mon Sep 17 00:00:00 2001
From: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
Date: Tue, 3 Mar 2015 10:52:25 +0100
Subject: usb: gadget: printer: add req_match for printer function

Verify that a given usb_ctrlrequest is meant for printer function.
The following parts of the request are tested:

- bmRequestType:Data transfer direction
- bmRequestType:Type
- bmRequestType:Recipient
- bRequest
- wValue for bRequest 1 and 2
- wLength

Additionally, the request is considered meant for this function
iff the decoded interface number matches dev->interface.

Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
---
 drivers/usb/gadget/legacy/printer.c | 36 ++++++++++++++++++++++++++++++++++++
 1 file changed, 36 insertions(+)

(limited to 'drivers/usb')

diff --git a/drivers/usb/gadget/legacy/printer.c b/drivers/usb/gadget/legacy/printer.c
index 78f515413e3b..c059af1aa454 100644
--- a/drivers/usb/gadget/legacy/printer.c
+++ b/drivers/usb/gadget/legacy/printer.c
@@ -974,6 +974,41 @@ static void printer_soft_reset(struct printer_dev *dev)
 
 /*-------------------------------------------------------------------------*/
 
+static bool gprinter_req_match(struct usb_function *f,
+			       const struct usb_ctrlrequest *ctrl)
+{
+	struct printer_dev	*dev = func_to_printer(f);
+	u16			w_index = le16_to_cpu(ctrl->wIndex);
+	u16			w_value = le16_to_cpu(ctrl->wValue);
+	u16			w_length = le16_to_cpu(ctrl->wLength);
+
+	if ((ctrl->bRequestType & USB_RECIP_MASK) != USB_RECIP_INTERFACE ||
+	    (ctrl->bRequestType & USB_TYPE_MASK) != USB_TYPE_CLASS)
+		return false;
+
+	switch (ctrl->bRequest) {
+	case GET_DEVICE_ID:
+		w_index >>= 8;
+		if (w_length <= PNP_STRING_LEN &&
+		    (USB_DIR_IN & ctrl->bRequestType))
+			break;
+		return false;
+	case GET_PORT_STATUS:
+		if (!w_value && w_length == 1 &&
+		    (USB_DIR_IN & ctrl->bRequestType))
+			break;
+		return false;
+	case SOFT_RESET:
+		if (!w_value && !w_length &&
+		   (USB_DIR_OUT & ctrl->bRequestType))
+			break;
+		/* fall through */
+	default:
+		return false;
+	}
+	return w_index == dev->interface;
+}
+
 /*
  * The setup() callback implements all the ep0 functionality that's not
  * handled lower down.
@@ -1251,6 +1286,7 @@ static int f_printer_bind_config(struct usb_configuration *c, char *pnp_str,
 	dev->function.unbind = printer_func_unbind;
 	dev->function.set_alt = printer_func_set_alt;
 	dev->function.disable = printer_func_disable;
+	dev->function.req_match = gprinter_req_match;
 	INIT_LIST_HEAD(&dev->tx_reqs);
 	INIT_LIST_HEAD(&dev->rx_reqs);
 	INIT_LIST_HEAD(&dev->rx_buffers);
-- 
cgit v1.2.3-59-g8ed1b


From 6dd8c2e69521ec9d7b23a741294702f844353f1a Mon Sep 17 00:00:00 2001
From: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
Date: Tue, 3 Mar 2015 10:52:26 +0100
Subject: usb: gadget: printer: allocate printer_dev instances dynamically

With all the obstacles removed it is possible to allow more than one
instance of the printer function. Since the function requires allocating
character device region, a maximum number of allowed instances is defined.
Such an approach is used in f_acm and in f_hid.
With multiple instances it does not make sense to depend on a
lock_printer_io member of a dynamically allocated (and destroyed) struct
printer_dev to clean up after all instances of the printer function.

Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
---
 drivers/usb/gadget/legacy/printer.c | 62 ++++++++++++++++++++++++-------------
 1 file changed, 40 insertions(+), 22 deletions(-)

(limited to 'drivers/usb')

diff --git a/drivers/usb/gadget/legacy/printer.c b/drivers/usb/gadget/legacy/printer.c
index c059af1aa454..d1f85f81975f 100644
--- a/drivers/usb/gadget/legacy/printer.c
+++ b/drivers/usb/gadget/legacy/printer.c
@@ -51,11 +51,12 @@ USB_GADGET_COMPOSITE_OPTIONS();
 #define GET_PORT_STATUS		1
 #define SOFT_RESET		2
 
+#define PRINTER_MINORS		4
+
 static const char shortname [] = "printer";
 static const char driver_desc [] = DRIVER_DESC;
 
-static dev_t g_printer_devno;
-
+static int major, minors;
 static struct class *usb_gadget_class;
 
 /*-------------------------------------------------------------------------*/
@@ -84,6 +85,7 @@ struct printer_dev {
 	u8			*current_rx_buf;
 	u8			printer_status;
 	u8			reset_printer;
+	int			minor;
 	struct cdev		printer_cdev;
 	u8			printer_cdev_open;
 	wait_queue_head_t	wait;
@@ -97,8 +99,6 @@ static inline struct printer_dev *func_to_printer(struct usb_function *f)
 	return container_of(f, struct printer_dev, function);
 }
 
-static struct printer_dev usb_printer_gadget;
-
 /*-------------------------------------------------------------------------*/
 
 /* DO NOT REUSE THESE IDs with a protocol-incompatible driver!!  Ever!!
@@ -1096,6 +1096,7 @@ static int __init printer_func_bind(struct usb_configuration *c,
 	struct usb_ep *in_ep;
 	struct usb_ep *out_ep = NULL;
 	struct usb_request *req;
+	dev_t devt;
 	int id;
 	int ret;
 	u32 i;
@@ -1153,8 +1154,9 @@ autoconf_fail:
 	}
 
 	/* Setup the sysfs files for the printer gadget. */
-	pdev = device_create(usb_gadget_class, NULL, g_printer_devno,
-				  NULL, "g_printer");
+	devt = MKDEV(major, dev->minor);
+	pdev = device_create(usb_gadget_class, NULL, devt,
+				  NULL, "g_printer%d", dev->minor);
 	if (IS_ERR(pdev)) {
 		ERROR(dev, "Failed to create device: g_printer\n");
 		ret = PTR_ERR(pdev);
@@ -1167,7 +1169,7 @@ autoconf_fail:
 	 */
 	cdev_init(&dev->printer_cdev, &printer_io_operations);
 	dev->printer_cdev.owner = THIS_MODULE;
-	ret = cdev_add(&dev->printer_cdev, g_printer_devno, 1);
+	ret = cdev_add(&dev->printer_cdev, devt, 1);
 	if (ret) {
 		ERROR(dev, "Failed to open char device\n");
 		goto fail_cdev_add;
@@ -1176,7 +1178,7 @@ autoconf_fail:
 	return 0;
 
 fail_cdev_add:
-	device_destroy(usb_gadget_class, g_printer_devno);
+	device_destroy(usb_gadget_class, devt);
 
 fail_rx_reqs:
 	while (!list_empty(&dev->rx_reqs)) {
@@ -1204,7 +1206,7 @@ static void printer_func_unbind(struct usb_configuration *c,
 
 	dev = func_to_printer(f);
 
-	device_destroy(usb_gadget_class, g_printer_devno);
+	device_destroy(usb_gadget_class, MKDEV(major, dev->minor));
 
 	/* Remove Character Device */
 	cdev_del(&dev->printer_cdev);
@@ -1238,6 +1240,7 @@ static void printer_func_unbind(struct usb_configuration *c,
 		printer_req_free(dev->out_ep, req);
 	}
 	usb_free_all_descriptors(f);
+	kfree(dev);
 }
 
 static int printer_func_set_alt(struct usb_function *f,
@@ -1271,14 +1274,21 @@ static struct usb_configuration printer_cfg_driver = {
 };
 
 static int f_printer_bind_config(struct usb_configuration *c, char *pnp_str,
-				 char *pnp_string, unsigned q_len)
+				 char *pnp_string, unsigned q_len, int minor)
 {
 	struct printer_dev	*dev;
 	int			status = -ENOMEM;
 	size_t			len;
 
-	dev = &usb_printer_gadget;
+	if (minor >= minors)
+		return -ENOENT;
+
+	dev = kzalloc(sizeof(*dev), GFP_KERNEL);
+	if (!dev)
+		return -ENOMEM;
+
 	dev->pnp_string = pnp_string;
+	dev->minor = minor;
 
 	dev->function.name = shortname;
 	dev->function.bind = printer_func_bind;
@@ -1315,8 +1325,10 @@ static int f_printer_bind_config(struct usb_configuration *c, char *pnp_str,
 	dev->q_len = q_len;
 
 	status = usb_add_function(c, &dev->function);
-	if (status)
+	if (status) {
+		kfree(dev);
 		return status;
+	}
 	INFO(dev, "%s, version: " DRIVER_VERSION "\n", driver_desc);
 	return 0;
 }
@@ -1335,43 +1347,51 @@ static int __init printer_do_config(struct usb_configuration *c)
 		printer_cfg_driver.bmAttributes |= USB_CONFIG_ATT_WAKEUP;
 	}
 
-	return f_printer_bind_config(c, iPNPstring, pnp_string, QLEN);
-
+	return f_printer_bind_config(c, iPNPstring, pnp_string, QLEN, 0);
 }
 
-static int gprinter_setup(void)
+static int gprinter_setup(int count)
 {
 	int status;
+	dev_t devt;
 
 	usb_gadget_class = class_create(THIS_MODULE, "usb_printer_gadget");
 	if (IS_ERR(usb_gadget_class)) {
 		status = PTR_ERR(usb_gadget_class);
+		usb_gadget_class = NULL;
 		pr_err("unable to create usb_gadget class %d\n", status);
 		return status;
 	}
 
-	status = alloc_chrdev_region(&g_printer_devno, 0, 1,
-			"USB printer gadget");
+	status = alloc_chrdev_region(&devt, 0, count, "USB printer gadget");
 	if (status) {
 		pr_err("alloc_chrdev_region %d\n", status);
 		class_destroy(usb_gadget_class);
+		usb_gadget_class = NULL;
+		return status;
 	}
 
+	major = MAJOR(devt);
+	minors = count;
+
 	return status;
 }
 
-/* must be called with struct printer_dev's lock_printer_io held */
 static void gprinter_cleanup(void)
 {
-	unregister_chrdev_region(g_printer_devno, 1);
+	if (major) {
+		unregister_chrdev_region(MKDEV(major, 0), minors);
+		major = minors = 0;
+	}
 	class_destroy(usb_gadget_class);
+	usb_gadget_class = NULL;
 }
 
 static int __init printer_bind(struct usb_composite_dev *cdev)
 {
 	int ret;
 
-	ret = gprinter_setup();
+	ret = gprinter_setup(PRINTER_MINORS);
 	if (ret)
 		return ret;
 
@@ -1418,9 +1438,7 @@ module_init(init);
 static void __exit
 cleanup(void)
 {
-	mutex_lock(&usb_printer_gadget.lock_printer_io);
 	usb_composite_unregister(&printer_driver);
-	mutex_unlock(&usb_printer_gadget.lock_printer_io);
 }
 module_exit(cleanup);
 
-- 
cgit v1.2.3-59-g8ed1b


From b185f01a9ab7af586133be2555298e960237359b Mon Sep 17 00:00:00 2001
From: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
Date: Tue, 3 Mar 2015 10:52:27 +0100
Subject: usb: gadget: printer: factor out f_printer

The legacy printer gadget now contains both a reusable printer function
and legacy gadget proper implementations interwoven, but logically
separate. This patch factors out a reusable f_printer.

Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
---
 drivers/usb/gadget/function/f_printer.c | 1279 +++++++++++++++++++++++++++++++
 drivers/usb/gadget/legacy/printer.c     | 1255 +-----------------------------
 2 files changed, 1285 insertions(+), 1249 deletions(-)
 create mode 100644 drivers/usb/gadget/function/f_printer.c

(limited to 'drivers/usb')

diff --git a/drivers/usb/gadget/function/f_printer.c b/drivers/usb/gadget/function/f_printer.c
new file mode 100644
index 000000000000..0847972b9686
--- /dev/null
+++ b/drivers/usb/gadget/function/f_printer.c
@@ -0,0 +1,1279 @@
+/*
+ * f_printer.c - USB printer function driver
+ *
+ * Copied from drivers/usb/gadget/legacy/printer.c,
+ * which was:
+ *
+ * printer.c -- Printer gadget driver
+ *
+ * Copyright (C) 2003-2005 David Brownell
+ * Copyright (C) 2006 Craig W. Nadler
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/ioport.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include <linux/mutex.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/timer.h>
+#include <linux/list.h>
+#include <linux/interrupt.h>
+#include <linux/device.h>
+#include <linux/moduleparam.h>
+#include <linux/fs.h>
+#include <linux/poll.h>
+#include <linux/types.h>
+#include <linux/ctype.h>
+#include <linux/cdev.h>
+
+#include <asm/byteorder.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/uaccess.h>
+#include <asm/unaligned.h>
+
+#include <linux/usb/ch9.h>
+#include <linux/usb/composite.h>
+#include <linux/usb/gadget.h>
+#include <linux/usb/g_printer.h>
+
+#define PNP_STRING_LEN		1024
+#define PRINTER_MINORS		4
+#define GET_DEVICE_ID		0
+#define GET_PORT_STATUS		1
+#define SOFT_RESET		2
+
+static int major, minors;
+static struct class *usb_gadget_class;
+
+/*-------------------------------------------------------------------------*/
+
+struct printer_dev {
+	spinlock_t		lock;		/* lock this structure */
+	/* lock buffer lists during read/write calls */
+	struct mutex		lock_printer_io;
+	struct usb_gadget	*gadget;
+	s8			interface;
+	struct usb_ep		*in_ep, *out_ep;
+
+	struct list_head	rx_reqs;	/* List of free RX structs */
+	struct list_head	rx_reqs_active;	/* List of Active RX xfers */
+	struct list_head	rx_buffers;	/* List of completed xfers */
+	/* wait until there is data to be read. */
+	wait_queue_head_t	rx_wait;
+	struct list_head	tx_reqs;	/* List of free TX structs */
+	struct list_head	tx_reqs_active; /* List of Active TX xfers */
+	/* Wait until there are write buffers available to use. */
+	wait_queue_head_t	tx_wait;
+	/* Wait until all write buffers have been sent. */
+	wait_queue_head_t	tx_flush_wait;
+	struct usb_request	*current_rx_req;
+	size_t			current_rx_bytes;
+	u8			*current_rx_buf;
+	u8			printer_status;
+	u8			reset_printer;
+	int			minor;
+	struct cdev		printer_cdev;
+	u8			printer_cdev_open;
+	wait_queue_head_t	wait;
+	unsigned		q_len;
+	char			*pnp_string;	/* We don't own memory! */
+	struct usb_function	function;
+};
+
+static inline struct printer_dev *func_to_printer(struct usb_function *f)
+{
+	return container_of(f, struct printer_dev, function);
+}
+
+/*-------------------------------------------------------------------------*/
+
+/*
+ * DESCRIPTORS ... most are static, but strings and (full) configuration
+ * descriptors are built on demand.
+ */
+
+/* holds our biggest descriptor */
+#define USB_DESC_BUFSIZE		256
+#define USB_BUFSIZE			8192
+
+static struct usb_interface_descriptor intf_desc = {
+	.bLength =		sizeof(intf_desc),
+	.bDescriptorType =	USB_DT_INTERFACE,
+	.bNumEndpoints =	2,
+	.bInterfaceClass =	USB_CLASS_PRINTER,
+	.bInterfaceSubClass =	1,	/* Printer Sub-Class */
+	.bInterfaceProtocol =	2,	/* Bi-Directional */
+	.iInterface =		0
+};
+
+static struct usb_endpoint_descriptor fs_ep_in_desc = {
+	.bLength =		USB_DT_ENDPOINT_SIZE,
+	.bDescriptorType =	USB_DT_ENDPOINT,
+	.bEndpointAddress =	USB_DIR_IN,
+	.bmAttributes =		USB_ENDPOINT_XFER_BULK
+};
+
+static struct usb_endpoint_descriptor fs_ep_out_desc = {
+	.bLength =		USB_DT_ENDPOINT_SIZE,
+	.bDescriptorType =	USB_DT_ENDPOINT,
+	.bEndpointAddress =	USB_DIR_OUT,
+	.bmAttributes =		USB_ENDPOINT_XFER_BULK
+};
+
+static struct usb_descriptor_header *fs_printer_function[] = {
+	(struct usb_descriptor_header *) &intf_desc,
+	(struct usb_descriptor_header *) &fs_ep_in_desc,
+	(struct usb_descriptor_header *) &fs_ep_out_desc,
+	NULL
+};
+
+/*
+ * usb 2.0 devices need to expose both high speed and full speed
+ * descriptors, unless they only run at full speed.
+ */
+
+static struct usb_endpoint_descriptor hs_ep_in_desc = {
+	.bLength =		USB_DT_ENDPOINT_SIZE,
+	.bDescriptorType =	USB_DT_ENDPOINT,
+	.bmAttributes =		USB_ENDPOINT_XFER_BULK,
+	.wMaxPacketSize =	cpu_to_le16(512)
+};
+
+static struct usb_endpoint_descriptor hs_ep_out_desc = {
+	.bLength =		USB_DT_ENDPOINT_SIZE,
+	.bDescriptorType =	USB_DT_ENDPOINT,
+	.bmAttributes =		USB_ENDPOINT_XFER_BULK,
+	.wMaxPacketSize =	cpu_to_le16(512)
+};
+
+static struct usb_qualifier_descriptor dev_qualifier = {
+	.bLength =		sizeof(dev_qualifier),
+	.bDescriptorType =	USB_DT_DEVICE_QUALIFIER,
+	.bcdUSB =		cpu_to_le16(0x0200),
+	.bDeviceClass =		USB_CLASS_PRINTER,
+	.bNumConfigurations =	1
+};
+
+static struct usb_descriptor_header *hs_printer_function[] = {
+	(struct usb_descriptor_header *) &intf_desc,
+	(struct usb_descriptor_header *) &hs_ep_in_desc,
+	(struct usb_descriptor_header *) &hs_ep_out_desc,
+	NULL
+};
+
+/*
+ * Added endpoint descriptors for 3.0 devices
+ */
+
+static struct usb_endpoint_descriptor ss_ep_in_desc = {
+	.bLength =              USB_DT_ENDPOINT_SIZE,
+	.bDescriptorType =      USB_DT_ENDPOINT,
+	.bmAttributes =         USB_ENDPOINT_XFER_BULK,
+	.wMaxPacketSize =       cpu_to_le16(1024),
+};
+
+static struct usb_ss_ep_comp_descriptor ss_ep_in_comp_desc = {
+	.bLength =              sizeof(ss_ep_in_comp_desc),
+	.bDescriptorType =      USB_DT_SS_ENDPOINT_COMP,
+};
+
+static struct usb_endpoint_descriptor ss_ep_out_desc = {
+	.bLength =              USB_DT_ENDPOINT_SIZE,
+	.bDescriptorType =      USB_DT_ENDPOINT,
+	.bmAttributes =         USB_ENDPOINT_XFER_BULK,
+	.wMaxPacketSize =       cpu_to_le16(1024),
+};
+
+static struct usb_ss_ep_comp_descriptor ss_ep_out_comp_desc = {
+	.bLength =              sizeof(ss_ep_out_comp_desc),
+	.bDescriptorType =      USB_DT_SS_ENDPOINT_COMP,
+};
+
+static struct usb_descriptor_header *ss_printer_function[] = {
+	(struct usb_descriptor_header *) &intf_desc,
+	(struct usb_descriptor_header *) &ss_ep_in_desc,
+	(struct usb_descriptor_header *) &ss_ep_in_comp_desc,
+	(struct usb_descriptor_header *) &ss_ep_out_desc,
+	(struct usb_descriptor_header *) &ss_ep_out_comp_desc,
+	NULL
+};
+
+/* maxpacket and other transfer characteristics vary by speed. */
+static inline struct usb_endpoint_descriptor *ep_desc(struct usb_gadget *gadget,
+					struct usb_endpoint_descriptor *fs,
+					struct usb_endpoint_descriptor *hs,
+					struct usb_endpoint_descriptor *ss)
+{
+	switch (gadget->speed) {
+	case USB_SPEED_SUPER:
+		return ss;
+	case USB_SPEED_HIGH:
+		return hs;
+	default:
+		return fs;
+	}
+}
+
+/*-------------------------------------------------------------------------*/
+
+static struct usb_request *
+printer_req_alloc(struct usb_ep *ep, unsigned len, gfp_t gfp_flags)
+{
+	struct usb_request	*req;
+
+	req = usb_ep_alloc_request(ep, gfp_flags);
+
+	if (req != NULL) {
+		req->length = len;
+		req->buf = kmalloc(len, gfp_flags);
+		if (req->buf == NULL) {
+			usb_ep_free_request(ep, req);
+			return NULL;
+		}
+	}
+
+	return req;
+}
+
+static void
+printer_req_free(struct usb_ep *ep, struct usb_request *req)
+{
+	if (ep != NULL && req != NULL) {
+		kfree(req->buf);
+		usb_ep_free_request(ep, req);
+	}
+}
+
+/*-------------------------------------------------------------------------*/
+
+static void rx_complete(struct usb_ep *ep, struct usb_request *req)
+{
+	struct printer_dev	*dev = ep->driver_data;
+	int			status = req->status;
+	unsigned long		flags;
+
+	spin_lock_irqsave(&dev->lock, flags);
+
+	list_del_init(&req->list);	/* Remode from Active List */
+
+	switch (status) {
+
+	/* normal completion */
+	case 0:
+		if (req->actual > 0) {
+			list_add_tail(&req->list, &dev->rx_buffers);
+			DBG(dev, "G_Printer : rx length %d\n", req->actual);
+		} else {
+			list_add(&req->list, &dev->rx_reqs);
+		}
+		break;
+
+	/* software-driven interface shutdown */
+	case -ECONNRESET:		/* unlink */
+	case -ESHUTDOWN:		/* disconnect etc */
+		VDBG(dev, "rx shutdown, code %d\n", status);
+		list_add(&req->list, &dev->rx_reqs);
+		break;
+
+	/* for hardware automagic (such as pxa) */
+	case -ECONNABORTED:		/* endpoint reset */
+		DBG(dev, "rx %s reset\n", ep->name);
+		list_add(&req->list, &dev->rx_reqs);
+		break;
+
+	/* data overrun */
+	case -EOVERFLOW:
+		/* FALLTHROUGH */
+
+	default:
+		DBG(dev, "rx status %d\n", status);
+		list_add(&req->list, &dev->rx_reqs);
+		break;
+	}
+
+	wake_up_interruptible(&dev->rx_wait);
+	spin_unlock_irqrestore(&dev->lock, flags);
+}
+
+static void tx_complete(struct usb_ep *ep, struct usb_request *req)
+{
+	struct printer_dev	*dev = ep->driver_data;
+
+	switch (req->status) {
+	default:
+		VDBG(dev, "tx err %d\n", req->status);
+		/* FALLTHROUGH */
+	case -ECONNRESET:		/* unlink */
+	case -ESHUTDOWN:		/* disconnect etc */
+		break;
+	case 0:
+		break;
+	}
+
+	spin_lock(&dev->lock);
+	/* Take the request struct off the active list and put it on the
+	 * free list.
+	 */
+	list_del_init(&req->list);
+	list_add(&req->list, &dev->tx_reqs);
+	wake_up_interruptible(&dev->tx_wait);
+	if (likely(list_empty(&dev->tx_reqs_active)))
+		wake_up_interruptible(&dev->tx_flush_wait);
+
+	spin_unlock(&dev->lock);
+}
+
+/*-------------------------------------------------------------------------*/
+
+static int
+printer_open(struct inode *inode, struct file *fd)
+{
+	struct printer_dev	*dev;
+	unsigned long		flags;
+	int			ret = -EBUSY;
+
+	dev = container_of(inode->i_cdev, struct printer_dev, printer_cdev);
+
+	spin_lock_irqsave(&dev->lock, flags);
+
+	if (!dev->printer_cdev_open) {
+		dev->printer_cdev_open = 1;
+		fd->private_data = dev;
+		ret = 0;
+		/* Change the printer status to show that it's on-line. */
+		dev->printer_status |= PRINTER_SELECTED;
+	}
+
+	spin_unlock_irqrestore(&dev->lock, flags);
+
+	DBG(dev, "printer_open returned %x\n", ret);
+	return ret;
+}
+
+static int
+printer_close(struct inode *inode, struct file *fd)
+{
+	struct printer_dev	*dev = fd->private_data;
+	unsigned long		flags;
+
+	spin_lock_irqsave(&dev->lock, flags);
+	dev->printer_cdev_open = 0;
+	fd->private_data = NULL;
+	/* Change printer status to show that the printer is off-line. */
+	dev->printer_status &= ~PRINTER_SELECTED;
+	spin_unlock_irqrestore(&dev->lock, flags);
+
+	DBG(dev, "printer_close\n");
+
+	return 0;
+}
+
+/* This function must be called with interrupts turned off. */
+static void
+setup_rx_reqs(struct printer_dev *dev)
+{
+	struct usb_request              *req;
+
+	while (likely(!list_empty(&dev->rx_reqs))) {
+		int error;
+
+		req = container_of(dev->rx_reqs.next,
+				struct usb_request, list);
+		list_del_init(&req->list);
+
+		/* The USB Host sends us whatever amount of data it wants to
+		 * so we always set the length field to the full USB_BUFSIZE.
+		 * If the amount of data is more than the read() caller asked
+		 * for it will be stored in the request buffer until it is
+		 * asked for by read().
+		 */
+		req->length = USB_BUFSIZE;
+		req->complete = rx_complete;
+
+		/* here, we unlock, and only unlock, to avoid deadlock. */
+		spin_unlock(&dev->lock);
+		error = usb_ep_queue(dev->out_ep, req, GFP_ATOMIC);
+		spin_lock(&dev->lock);
+		if (error) {
+			DBG(dev, "rx submit --> %d\n", error);
+			list_add(&req->list, &dev->rx_reqs);
+			break;
+		}
+		/* if the req is empty, then add it into dev->rx_reqs_active. */
+		else if (list_empty(&req->list))
+			list_add(&req->list, &dev->rx_reqs_active);
+	}
+}
+
+static ssize_t
+printer_read(struct file *fd, char __user *buf, size_t len, loff_t *ptr)
+{
+	struct printer_dev		*dev = fd->private_data;
+	unsigned long			flags;
+	size_t				size;
+	size_t				bytes_copied;
+	struct usb_request		*req;
+	/* This is a pointer to the current USB rx request. */
+	struct usb_request		*current_rx_req;
+	/* This is the number of bytes in the current rx buffer. */
+	size_t				current_rx_bytes;
+	/* This is a pointer to the current rx buffer. */
+	u8				*current_rx_buf;
+
+	if (len == 0)
+		return -EINVAL;
+
+	DBG(dev, "printer_read trying to read %d bytes\n", (int)len);
+
+	mutex_lock(&dev->lock_printer_io);
+	spin_lock_irqsave(&dev->lock, flags);
+
+	/* We will use this flag later to check if a printer reset happened
+	 * after we turn interrupts back on.
+	 */
+	dev->reset_printer = 0;
+
+	setup_rx_reqs(dev);
+
+	bytes_copied = 0;
+	current_rx_req = dev->current_rx_req;
+	current_rx_bytes = dev->current_rx_bytes;
+	current_rx_buf = dev->current_rx_buf;
+	dev->current_rx_req = NULL;
+	dev->current_rx_bytes = 0;
+	dev->current_rx_buf = NULL;
+
+	/* Check if there is any data in the read buffers. Please note that
+	 * current_rx_bytes is the number of bytes in the current rx buffer.
+	 * If it is zero then check if there are any other rx_buffers that
+	 * are on the completed list. We are only out of data if all rx
+	 * buffers are empty.
+	 */
+	if ((current_rx_bytes == 0) &&
+			(likely(list_empty(&dev->rx_buffers)))) {
+		/* Turn interrupts back on before sleeping. */
+		spin_unlock_irqrestore(&dev->lock, flags);
+
+		/*
+		 * If no data is available check if this is a NON-Blocking
+		 * call or not.
+		 */
+		if (fd->f_flags & (O_NONBLOCK|O_NDELAY)) {
+			mutex_unlock(&dev->lock_printer_io);
+			return -EAGAIN;
+		}
+
+		/* Sleep until data is available */
+		wait_event_interruptible(dev->rx_wait,
+				(likely(!list_empty(&dev->rx_buffers))));
+		spin_lock_irqsave(&dev->lock, flags);
+	}
+
+	/* We have data to return then copy it to the caller's buffer.*/
+	while ((current_rx_bytes || likely(!list_empty(&dev->rx_buffers)))
+			&& len) {
+		if (current_rx_bytes == 0) {
+			req = container_of(dev->rx_buffers.next,
+					struct usb_request, list);
+			list_del_init(&req->list);
+
+			if (req->actual && req->buf) {
+				current_rx_req = req;
+				current_rx_bytes = req->actual;
+				current_rx_buf = req->buf;
+			} else {
+				list_add(&req->list, &dev->rx_reqs);
+				continue;
+			}
+		}
+
+		/* Don't leave irqs off while doing memory copies */
+		spin_unlock_irqrestore(&dev->lock, flags);
+
+		if (len > current_rx_bytes)
+			size = current_rx_bytes;
+		else
+			size = len;
+
+		size -= copy_to_user(buf, current_rx_buf, size);
+		bytes_copied += size;
+		len -= size;
+		buf += size;
+
+		spin_lock_irqsave(&dev->lock, flags);
+
+		/* We've disconnected or reset so return. */
+		if (dev->reset_printer) {
+			list_add(&current_rx_req->list, &dev->rx_reqs);
+			spin_unlock_irqrestore(&dev->lock, flags);
+			mutex_unlock(&dev->lock_printer_io);
+			return -EAGAIN;
+		}
+
+		/* If we not returning all the data left in this RX request
+		 * buffer then adjust the amount of data left in the buffer.
+		 * Othewise if we are done with this RX request buffer then
+		 * requeue it to get any incoming data from the USB host.
+		 */
+		if (size < current_rx_bytes) {
+			current_rx_bytes -= size;
+			current_rx_buf += size;
+		} else {
+			list_add(&current_rx_req->list, &dev->rx_reqs);
+			current_rx_bytes = 0;
+			current_rx_buf = NULL;
+			current_rx_req = NULL;
+		}
+	}
+
+	dev->current_rx_req = current_rx_req;
+	dev->current_rx_bytes = current_rx_bytes;
+	dev->current_rx_buf = current_rx_buf;
+
+	spin_unlock_irqrestore(&dev->lock, flags);
+	mutex_unlock(&dev->lock_printer_io);
+
+	DBG(dev, "printer_read returned %d bytes\n", (int)bytes_copied);
+
+	if (bytes_copied)
+		return bytes_copied;
+	else
+		return -EAGAIN;
+}
+
+static ssize_t
+printer_write(struct file *fd, const char __user *buf, size_t len, loff_t *ptr)
+{
+	struct printer_dev	*dev = fd->private_data;
+	unsigned long		flags;
+	size_t			size;	/* Amount of data in a TX request. */
+	size_t			bytes_copied = 0;
+	struct usb_request	*req;
+
+	DBG(dev, "printer_write trying to send %d bytes\n", (int)len);
+
+	if (len == 0)
+		return -EINVAL;
+
+	mutex_lock(&dev->lock_printer_io);
+	spin_lock_irqsave(&dev->lock, flags);
+
+	/* Check if a printer reset happens while we have interrupts on */
+	dev->reset_printer = 0;
+
+	/* Check if there is any available write buffers */
+	if (likely(list_empty(&dev->tx_reqs))) {
+		/* Turn interrupts back on before sleeping. */
+		spin_unlock_irqrestore(&dev->lock, flags);
+
+		/*
+		 * If write buffers are available check if this is
+		 * a NON-Blocking call or not.
+		 */
+		if (fd->f_flags & (O_NONBLOCK|O_NDELAY)) {
+			mutex_unlock(&dev->lock_printer_io);
+			return -EAGAIN;
+		}
+
+		/* Sleep until a write buffer is available */
+		wait_event_interruptible(dev->tx_wait,
+				(likely(!list_empty(&dev->tx_reqs))));
+		spin_lock_irqsave(&dev->lock, flags);
+	}
+
+	while (likely(!list_empty(&dev->tx_reqs)) && len) {
+
+		if (len > USB_BUFSIZE)
+			size = USB_BUFSIZE;
+		else
+			size = len;
+
+		req = container_of(dev->tx_reqs.next, struct usb_request,
+				list);
+		list_del_init(&req->list);
+
+		req->complete = tx_complete;
+		req->length = size;
+
+		/* Check if we need to send a zero length packet. */
+		if (len > size)
+			/* They will be more TX requests so no yet. */
+			req->zero = 0;
+		else
+			/* If the data amount is not a multiple of the
+			 * maxpacket size then send a zero length packet.
+			 */
+			req->zero = ((len % dev->in_ep->maxpacket) == 0);
+
+		/* Don't leave irqs off while doing memory copies */
+		spin_unlock_irqrestore(&dev->lock, flags);
+
+		if (copy_from_user(req->buf, buf, size)) {
+			list_add(&req->list, &dev->tx_reqs);
+			mutex_unlock(&dev->lock_printer_io);
+			return bytes_copied;
+		}
+
+		bytes_copied += size;
+		len -= size;
+		buf += size;
+
+		spin_lock_irqsave(&dev->lock, flags);
+
+		/* We've disconnected or reset so free the req and buffer */
+		if (dev->reset_printer) {
+			list_add(&req->list, &dev->tx_reqs);
+			spin_unlock_irqrestore(&dev->lock, flags);
+			mutex_unlock(&dev->lock_printer_io);
+			return -EAGAIN;
+		}
+
+		if (usb_ep_queue(dev->in_ep, req, GFP_ATOMIC)) {
+			list_add(&req->list, &dev->tx_reqs);
+			spin_unlock_irqrestore(&dev->lock, flags);
+			mutex_unlock(&dev->lock_printer_io);
+			return -EAGAIN;
+		}
+
+		list_add(&req->list, &dev->tx_reqs_active);
+
+	}
+
+	spin_unlock_irqrestore(&dev->lock, flags);
+	mutex_unlock(&dev->lock_printer_io);
+
+	DBG(dev, "printer_write sent %d bytes\n", (int)bytes_copied);
+
+	if (bytes_copied)
+		return bytes_copied;
+	else
+		return -EAGAIN;
+}
+
+static int
+printer_fsync(struct file *fd, loff_t start, loff_t end, int datasync)
+{
+	struct printer_dev	*dev = fd->private_data;
+	struct inode *inode = file_inode(fd);
+	unsigned long		flags;
+	int			tx_list_empty;
+
+	mutex_lock(&inode->i_mutex);
+	spin_lock_irqsave(&dev->lock, flags);
+	tx_list_empty = (likely(list_empty(&dev->tx_reqs)));
+	spin_unlock_irqrestore(&dev->lock, flags);
+
+	if (!tx_list_empty) {
+		/* Sleep until all data has been sent */
+		wait_event_interruptible(dev->tx_flush_wait,
+				(likely(list_empty(&dev->tx_reqs_active))));
+	}
+	mutex_unlock(&inode->i_mutex);
+
+	return 0;
+}
+
+static unsigned int
+printer_poll(struct file *fd, poll_table *wait)
+{
+	struct printer_dev	*dev = fd->private_data;
+	unsigned long		flags;
+	int			status = 0;
+
+	mutex_lock(&dev->lock_printer_io);
+	spin_lock_irqsave(&dev->lock, flags);
+	setup_rx_reqs(dev);
+	spin_unlock_irqrestore(&dev->lock, flags);
+	mutex_unlock(&dev->lock_printer_io);
+
+	poll_wait(fd, &dev->rx_wait, wait);
+	poll_wait(fd, &dev->tx_wait, wait);
+
+	spin_lock_irqsave(&dev->lock, flags);
+	if (likely(!list_empty(&dev->tx_reqs)))
+		status |= POLLOUT | POLLWRNORM;
+
+	if (likely(dev->current_rx_bytes) ||
+			likely(!list_empty(&dev->rx_buffers)))
+		status |= POLLIN | POLLRDNORM;
+
+	spin_unlock_irqrestore(&dev->lock, flags);
+
+	return status;
+}
+
+static long
+printer_ioctl(struct file *fd, unsigned int code, unsigned long arg)
+{
+	struct printer_dev	*dev = fd->private_data;
+	unsigned long		flags;
+	int			status = 0;
+
+	DBG(dev, "printer_ioctl: cmd=0x%4.4x, arg=%lu\n", code, arg);
+
+	/* handle ioctls */
+
+	spin_lock_irqsave(&dev->lock, flags);
+
+	switch (code) {
+	case GADGET_GET_PRINTER_STATUS:
+		status = (int)dev->printer_status;
+		break;
+	case GADGET_SET_PRINTER_STATUS:
+		dev->printer_status = (u8)arg;
+		break;
+	default:
+		/* could not handle ioctl */
+		DBG(dev, "printer_ioctl: ERROR cmd=0x%4.4xis not supported\n",
+				code);
+		status = -ENOTTY;
+	}
+
+	spin_unlock_irqrestore(&dev->lock, flags);
+
+	return status;
+}
+
+/* used after endpoint configuration */
+static const struct file_operations printer_io_operations = {
+	.owner =	THIS_MODULE,
+	.open =		printer_open,
+	.read =		printer_read,
+	.write =	printer_write,
+	.fsync =	printer_fsync,
+	.poll =		printer_poll,
+	.unlocked_ioctl = printer_ioctl,
+	.release =	printer_close,
+	.llseek =	noop_llseek,
+};
+
+/*-------------------------------------------------------------------------*/
+
+static int
+set_printer_interface(struct printer_dev *dev)
+{
+	int			result = 0;
+
+	dev->in_ep->desc = ep_desc(dev->gadget, &fs_ep_in_desc, &hs_ep_in_desc,
+				&ss_ep_in_desc);
+	dev->in_ep->driver_data = dev;
+
+	dev->out_ep->desc = ep_desc(dev->gadget, &fs_ep_out_desc,
+				    &hs_ep_out_desc, &ss_ep_out_desc);
+	dev->out_ep->driver_data = dev;
+
+	result = usb_ep_enable(dev->in_ep);
+	if (result != 0) {
+		DBG(dev, "enable %s --> %d\n", dev->in_ep->name, result);
+		goto done;
+	}
+
+	result = usb_ep_enable(dev->out_ep);
+	if (result != 0) {
+		DBG(dev, "enable %s --> %d\n", dev->in_ep->name, result);
+		goto done;
+	}
+
+done:
+	/* on error, disable any endpoints  */
+	if (result != 0) {
+		(void) usb_ep_disable(dev->in_ep);
+		(void) usb_ep_disable(dev->out_ep);
+		dev->in_ep->desc = NULL;
+		dev->out_ep->desc = NULL;
+	}
+
+	/* caller is responsible for cleanup on error */
+	return result;
+}
+
+static void printer_reset_interface(struct printer_dev *dev)
+{
+	if (dev->interface < 0)
+		return;
+
+	DBG(dev, "%s\n", __func__);
+
+	if (dev->in_ep->desc)
+		usb_ep_disable(dev->in_ep);
+
+	if (dev->out_ep->desc)
+		usb_ep_disable(dev->out_ep);
+
+	dev->in_ep->desc = NULL;
+	dev->out_ep->desc = NULL;
+	dev->interface = -1;
+}
+
+/* Change our operational Interface. */
+static int set_interface(struct printer_dev *dev, unsigned number)
+{
+	int			result = 0;
+
+	/* Free the current interface */
+	printer_reset_interface(dev);
+
+	result = set_printer_interface(dev);
+	if (result)
+		printer_reset_interface(dev);
+	else
+		dev->interface = number;
+
+	if (!result)
+		INFO(dev, "Using interface %x\n", number);
+
+	return result;
+}
+
+static void printer_soft_reset(struct printer_dev *dev)
+{
+	struct usb_request	*req;
+
+	INFO(dev, "Received Printer Reset Request\n");
+
+	if (usb_ep_disable(dev->in_ep))
+		DBG(dev, "Failed to disable USB in_ep\n");
+	if (usb_ep_disable(dev->out_ep))
+		DBG(dev, "Failed to disable USB out_ep\n");
+
+	if (dev->current_rx_req != NULL) {
+		list_add(&dev->current_rx_req->list, &dev->rx_reqs);
+		dev->current_rx_req = NULL;
+	}
+	dev->current_rx_bytes = 0;
+	dev->current_rx_buf = NULL;
+	dev->reset_printer = 1;
+
+	while (likely(!(list_empty(&dev->rx_buffers)))) {
+		req = container_of(dev->rx_buffers.next, struct usb_request,
+				list);
+		list_del_init(&req->list);
+		list_add(&req->list, &dev->rx_reqs);
+	}
+
+	while (likely(!(list_empty(&dev->rx_reqs_active)))) {
+		req = container_of(dev->rx_buffers.next, struct usb_request,
+				list);
+		list_del_init(&req->list);
+		list_add(&req->list, &dev->rx_reqs);
+	}
+
+	while (likely(!(list_empty(&dev->tx_reqs_active)))) {
+		req = container_of(dev->tx_reqs_active.next,
+				struct usb_request, list);
+		list_del_init(&req->list);
+		list_add(&req->list, &dev->tx_reqs);
+	}
+
+	if (usb_ep_enable(dev->in_ep))
+		DBG(dev, "Failed to enable USB in_ep\n");
+	if (usb_ep_enable(dev->out_ep))
+		DBG(dev, "Failed to enable USB out_ep\n");
+
+	wake_up_interruptible(&dev->rx_wait);
+	wake_up_interruptible(&dev->tx_wait);
+	wake_up_interruptible(&dev->tx_flush_wait);
+}
+
+/*-------------------------------------------------------------------------*/
+
+static bool gprinter_req_match(struct usb_function *f,
+			       const struct usb_ctrlrequest *ctrl)
+{
+	struct printer_dev	*dev = func_to_printer(f);
+	u16			w_index = le16_to_cpu(ctrl->wIndex);
+	u16			w_value = le16_to_cpu(ctrl->wValue);
+	u16			w_length = le16_to_cpu(ctrl->wLength);
+
+	if ((ctrl->bRequestType & USB_RECIP_MASK) != USB_RECIP_INTERFACE ||
+	    (ctrl->bRequestType & USB_TYPE_MASK) != USB_TYPE_CLASS)
+		return false;
+
+	switch (ctrl->bRequest) {
+	case GET_DEVICE_ID:
+		w_index >>= 8;
+		if (w_length <= PNP_STRING_LEN &&
+		    (USB_DIR_IN & ctrl->bRequestType))
+			break;
+		return false;
+	case GET_PORT_STATUS:
+		if (!w_value && w_length == 1 &&
+		    (USB_DIR_IN & ctrl->bRequestType))
+			break;
+		return false;
+	case SOFT_RESET:
+		if (!w_value && !w_length &&
+		   (USB_DIR_OUT & ctrl->bRequestType))
+			break;
+		/* fall through */
+	default:
+		return false;
+	}
+	return w_index == dev->interface;
+}
+
+/*
+ * The setup() callback implements all the ep0 functionality that's not
+ * handled lower down.
+ */
+static int printer_func_setup(struct usb_function *f,
+		const struct usb_ctrlrequest *ctrl)
+{
+	struct printer_dev *dev = func_to_printer(f);
+	struct usb_composite_dev *cdev = f->config->cdev;
+	struct usb_request	*req = cdev->req;
+	int			value = -EOPNOTSUPP;
+	u16			wIndex = le16_to_cpu(ctrl->wIndex);
+	u16			wValue = le16_to_cpu(ctrl->wValue);
+	u16			wLength = le16_to_cpu(ctrl->wLength);
+
+	DBG(dev, "ctrl req%02x.%02x v%04x i%04x l%d\n",
+		ctrl->bRequestType, ctrl->bRequest, wValue, wIndex, wLength);
+
+	switch (ctrl->bRequestType&USB_TYPE_MASK) {
+	case USB_TYPE_CLASS:
+		switch (ctrl->bRequest) {
+		case GET_DEVICE_ID: /* Get the IEEE-1284 PNP String */
+			/* Only one printer interface is supported. */
+			if ((wIndex>>8) != dev->interface)
+				break;
+
+			value = (dev->pnp_string[0] << 8) | dev->pnp_string[1];
+			memcpy(req->buf, dev->pnp_string, value);
+			DBG(dev, "1284 PNP String: %x %s\n", value,
+					&dev->pnp_string[2]);
+			break;
+
+		case GET_PORT_STATUS: /* Get Port Status */
+			/* Only one printer interface is supported. */
+			if (wIndex != dev->interface)
+				break;
+
+			*(u8 *)req->buf = dev->printer_status;
+			value = min_t(u16, wLength, 1);
+			break;
+
+		case SOFT_RESET: /* Soft Reset */
+			/* Only one printer interface is supported. */
+			if (wIndex != dev->interface)
+				break;
+
+			printer_soft_reset(dev);
+
+			value = 0;
+			break;
+
+		default:
+			goto unknown;
+		}
+		break;
+
+	default:
+unknown:
+		VDBG(dev,
+			"unknown ctrl req%02x.%02x v%04x i%04x l%d\n",
+			ctrl->bRequestType, ctrl->bRequest,
+			wValue, wIndex, wLength);
+		break;
+	}
+	/* host either stalls (value < 0) or reports success */
+	if (value >= 0) {
+		req->length = value;
+		req->zero = value < wLength;
+		value = usb_ep_queue(cdev->gadget->ep0, req, GFP_ATOMIC);
+		if (value < 0) {
+			ERROR(dev, "%s:%d Error!\n", __func__, __LINE__);
+			req->status = 0;
+		}
+	}
+	return value;
+}
+
+static int __init printer_func_bind(struct usb_configuration *c,
+		struct usb_function *f)
+{
+	struct usb_gadget *gadget = c->cdev->gadget;
+	struct printer_dev *dev = func_to_printer(f);
+	struct device *pdev;
+	struct usb_composite_dev *cdev = c->cdev;
+	struct usb_ep *in_ep;
+	struct usb_ep *out_ep = NULL;
+	struct usb_request *req;
+	dev_t devt;
+	int id;
+	int ret;
+	u32 i;
+
+	id = usb_interface_id(c, f);
+	if (id < 0)
+		return id;
+	intf_desc.bInterfaceNumber = id;
+
+	/* finish hookup to lower layer ... */
+	dev->gadget = gadget;
+
+	/* all we really need is bulk IN/OUT */
+	in_ep = usb_ep_autoconfig(cdev->gadget, &fs_ep_in_desc);
+	if (!in_ep) {
+autoconf_fail:
+		dev_err(&cdev->gadget->dev, "can't autoconfigure on %s\n",
+			cdev->gadget->name);
+		return -ENODEV;
+	}
+	in_ep->driver_data = in_ep;	/* claim */
+
+	out_ep = usb_ep_autoconfig(cdev->gadget, &fs_ep_out_desc);
+	if (!out_ep)
+		goto autoconf_fail;
+	out_ep->driver_data = out_ep;	/* claim */
+
+	/* assumes that all endpoints are dual-speed */
+	hs_ep_in_desc.bEndpointAddress = fs_ep_in_desc.bEndpointAddress;
+	hs_ep_out_desc.bEndpointAddress = fs_ep_out_desc.bEndpointAddress;
+	ss_ep_in_desc.bEndpointAddress = fs_ep_in_desc.bEndpointAddress;
+	ss_ep_out_desc.bEndpointAddress = fs_ep_out_desc.bEndpointAddress;
+
+	ret = usb_assign_descriptors(f, fs_printer_function,
+			hs_printer_function, ss_printer_function);
+	if (ret)
+		return ret;
+
+	dev->in_ep = in_ep;
+	dev->out_ep = out_ep;
+
+	ret = -ENOMEM;
+	for (i = 0; i < dev->q_len; i++) {
+		req = printer_req_alloc(dev->in_ep, USB_BUFSIZE, GFP_KERNEL);
+		if (!req)
+			goto fail_tx_reqs;
+		list_add(&req->list, &dev->tx_reqs);
+	}
+
+	for (i = 0; i < dev->q_len; i++) {
+		req = printer_req_alloc(dev->out_ep, USB_BUFSIZE, GFP_KERNEL);
+		if (!req)
+			goto fail_rx_reqs;
+		list_add(&req->list, &dev->rx_reqs);
+	}
+
+	/* Setup the sysfs files for the printer gadget. */
+	devt = MKDEV(major, dev->minor);
+	pdev = device_create(usb_gadget_class, NULL, devt,
+				  NULL, "g_printer%d", dev->minor);
+	if (IS_ERR(pdev)) {
+		ERROR(dev, "Failed to create device: g_printer\n");
+		ret = PTR_ERR(pdev);
+		goto fail_rx_reqs;
+	}
+
+	/*
+	 * Register a character device as an interface to a user mode
+	 * program that handles the printer specific functionality.
+	 */
+	cdev_init(&dev->printer_cdev, &printer_io_operations);
+	dev->printer_cdev.owner = THIS_MODULE;
+	ret = cdev_add(&dev->printer_cdev, devt, 1);
+	if (ret) {
+		ERROR(dev, "Failed to open char device\n");
+		goto fail_cdev_add;
+	}
+
+	return 0;
+
+fail_cdev_add:
+	device_destroy(usb_gadget_class, devt);
+
+fail_rx_reqs:
+	while (!list_empty(&dev->rx_reqs)) {
+		req = container_of(dev->rx_reqs.next, struct usb_request, list);
+		list_del(&req->list);
+		printer_req_free(dev->out_ep, req);
+	}
+
+fail_tx_reqs:
+	while (!list_empty(&dev->tx_reqs)) {
+		req = container_of(dev->tx_reqs.next, struct usb_request, list);
+		list_del(&req->list);
+		printer_req_free(dev->in_ep, req);
+	}
+
+	return ret;
+
+}
+
+static void printer_func_unbind(struct usb_configuration *c,
+		struct usb_function *f)
+{
+	struct printer_dev	*dev;
+	struct usb_request	*req;
+
+	dev = func_to_printer(f);
+
+	device_destroy(usb_gadget_class, MKDEV(major, dev->minor));
+
+	/* Remove Character Device */
+	cdev_del(&dev->printer_cdev);
+
+	/* we must already have been disconnected ... no i/o may be active */
+	WARN_ON(!list_empty(&dev->tx_reqs_active));
+	WARN_ON(!list_empty(&dev->rx_reqs_active));
+
+	/* Free all memory for this driver. */
+	while (!list_empty(&dev->tx_reqs)) {
+		req = container_of(dev->tx_reqs.next, struct usb_request,
+				list);
+		list_del(&req->list);
+		printer_req_free(dev->in_ep, req);
+	}
+
+	if (dev->current_rx_req != NULL)
+		printer_req_free(dev->out_ep, dev->current_rx_req);
+
+	while (!list_empty(&dev->rx_reqs)) {
+		req = container_of(dev->rx_reqs.next,
+				struct usb_request, list);
+		list_del(&req->list);
+		printer_req_free(dev->out_ep, req);
+	}
+
+	while (!list_empty(&dev->rx_buffers)) {
+		req = container_of(dev->rx_buffers.next,
+				struct usb_request, list);
+		list_del(&req->list);
+		printer_req_free(dev->out_ep, req);
+	}
+	usb_free_all_descriptors(f);
+	kfree(dev);
+}
+
+static int printer_func_set_alt(struct usb_function *f,
+		unsigned intf, unsigned alt)
+{
+	struct printer_dev *dev = func_to_printer(f);
+	int ret = -ENOTSUPP;
+
+	if (!alt)
+		ret = set_interface(dev, intf);
+
+	return ret;
+}
+
+static void printer_func_disable(struct usb_function *f)
+{
+	struct printer_dev *dev = func_to_printer(f);
+	unsigned long		flags;
+
+	DBG(dev, "%s\n", __func__);
+
+	spin_lock_irqsave(&dev->lock, flags);
+	printer_reset_interface(dev);
+	spin_unlock_irqrestore(&dev->lock, flags);
+}
+
+static int f_printer_bind_config(struct usb_configuration *c, char *pnp_str,
+				 char *pnp_string, unsigned q_len, int minor)
+{
+	struct printer_dev	*dev;
+	int			status = -ENOMEM;
+	size_t			len;
+
+	if (minor >= minors)
+		return -ENOENT;
+
+	dev = kzalloc(sizeof(*dev), GFP_KERNEL);
+	if (!dev)
+		return -ENOMEM;
+
+	dev->pnp_string = pnp_string;
+	dev->minor = minor;
+
+	dev->function.name = shortname;
+	dev->function.bind = printer_func_bind;
+	dev->function.setup = printer_func_setup;
+	dev->function.unbind = printer_func_unbind;
+	dev->function.set_alt = printer_func_set_alt;
+	dev->function.disable = printer_func_disable;
+	dev->function.req_match = gprinter_req_match;
+	INIT_LIST_HEAD(&dev->tx_reqs);
+	INIT_LIST_HEAD(&dev->rx_reqs);
+	INIT_LIST_HEAD(&dev->rx_buffers);
+
+	if (pnp_str)
+		strlcpy(&dev->pnp_string[2], pnp_str, PNP_STRING_LEN - 2);
+
+	len = strlen(pnp_string);
+	pnp_string[0] = (len >> 8) & 0xFF;
+	pnp_string[1] = len & 0xFF;
+
+	spin_lock_init(&dev->lock);
+	mutex_init(&dev->lock_printer_io);
+	INIT_LIST_HEAD(&dev->tx_reqs_active);
+	INIT_LIST_HEAD(&dev->rx_reqs_active);
+	init_waitqueue_head(&dev->rx_wait);
+	init_waitqueue_head(&dev->tx_wait);
+	init_waitqueue_head(&dev->tx_flush_wait);
+
+	dev->interface = -1;
+	dev->printer_cdev_open = 0;
+	dev->printer_status = PRINTER_NOT_ERROR;
+	dev->current_rx_req = NULL;
+	dev->current_rx_bytes = 0;
+	dev->current_rx_buf = NULL;
+	dev->q_len = q_len;
+
+	status = usb_add_function(c, &dev->function);
+	if (status) {
+		kfree(dev);
+		return status;
+	}
+
+	INFO(dev, "%s, version: " DRIVER_VERSION "\n", driver_desc);
+	return 0;
+}
+
+static int gprinter_setup(int count)
+{
+	int status;
+	dev_t devt;
+
+	usb_gadget_class = class_create(THIS_MODULE, "usb_printer_gadget");
+	if (IS_ERR(usb_gadget_class)) {
+		status = PTR_ERR(usb_gadget_class);
+		usb_gadget_class = NULL;
+		pr_err("unable to create usb_gadget class %d\n", status);
+		return status;
+	}
+
+	status = alloc_chrdev_region(&devt, 0, count, "USB printer gadget");
+	if (status) {
+		pr_err("alloc_chrdev_region %d\n", status);
+		class_destroy(usb_gadget_class);
+		usb_gadget_class = NULL;
+		return status;
+	}
+
+	major = MAJOR(devt);
+	minors = count;
+
+	return status;
+}
+
+static void gprinter_cleanup(void)
+{
+	if (major) {
+		unregister_chrdev_region(MKDEV(major, 0), minors);
+		major = minors = 0;
+	}
+	class_destroy(usb_gadget_class);
+	usb_gadget_class = NULL;
+}
diff --git a/drivers/usb/gadget/legacy/printer.c b/drivers/usb/gadget/legacy/printer.c
index d1f85f81975f..4d926d08df02 100644
--- a/drivers/usb/gadget/legacy/printer.c
+++ b/drivers/usb/gadget/legacy/printer.c
@@ -12,29 +12,7 @@
 
 #include <linux/module.h>
 #include <linux/kernel.h>
-#include <linux/delay.h>
-#include <linux/ioport.h>
-#include <linux/sched.h>
-#include <linux/slab.h>
-#include <linux/mutex.h>
-#include <linux/errno.h>
-#include <linux/init.h>
-#include <linux/timer.h>
-#include <linux/list.h>
-#include <linux/interrupt.h>
-#include <linux/device.h>
-#include <linux/moduleparam.h>
-#include <linux/fs.h>
-#include <linux/poll.h>
-#include <linux/types.h>
-#include <linux/ctype.h>
-#include <linux/cdev.h>
-
 #include <asm/byteorder.h>
-#include <linux/io.h>
-#include <linux/irq.h>
-#include <linux/uaccess.h>
-#include <asm/unaligned.h>
 
 #include <linux/usb/ch9.h>
 #include <linux/usb/composite.h>
@@ -46,58 +24,16 @@
 USB_GADGET_COMPOSITE_OPTIONS();
 
 #define DRIVER_DESC		"Printer Gadget"
-#define DRIVER_VERSION		"2007 OCT 06"
-#define GET_DEVICE_ID		0
-#define GET_PORT_STATUS		1
-#define SOFT_RESET		2
-
-#define PRINTER_MINORS		4
+#define DRIVER_VERSION		"2015 FEB 17"
 
 static const char shortname [] = "printer";
 static const char driver_desc [] = DRIVER_DESC;
 
-static int major, minors;
-static struct class *usb_gadget_class;
-
-/*-------------------------------------------------------------------------*/
-
-struct printer_dev {
-	spinlock_t		lock;		/* lock this structure */
-	/* lock buffer lists during read/write calls */
-	struct mutex		lock_printer_io;
-	struct usb_gadget	*gadget;
-	s8			interface;
-	struct usb_ep		*in_ep, *out_ep;
-
-	struct list_head	rx_reqs;	/* List of free RX structs */
-	struct list_head	rx_reqs_active;	/* List of Active RX xfers */
-	struct list_head	rx_buffers;	/* List of completed xfers */
-	/* wait until there is data to be read. */
-	wait_queue_head_t	rx_wait;
-	struct list_head	tx_reqs;	/* List of free TX structs */
-	struct list_head	tx_reqs_active; /* List of Active TX xfers */
-	/* Wait until there are write buffers available to use. */
-	wait_queue_head_t	tx_wait;
-	/* Wait until all write buffers have been sent. */
-	wait_queue_head_t	tx_flush_wait;
-	struct usb_request	*current_rx_req;
-	size_t			current_rx_bytes;
-	u8			*current_rx_buf;
-	u8			printer_status;
-	u8			reset_printer;
-	int			minor;
-	struct cdev		printer_cdev;
-	u8			printer_cdev_open;
-	wait_queue_head_t	wait;
-	unsigned		q_len;
-	char			*pnp_string;	/* We don't own memory! */
-	struct usb_function	function;
-};
-
-static inline struct printer_dev *func_to_printer(struct usb_function *f)
-{
-	return container_of(f, struct printer_dev, function);
-}
+/*
+ * This will be changed when f_printer is converted
+ * to the new function interface.
+ */
+#include "f_printer.c"
 
 /*-------------------------------------------------------------------------*/
 
@@ -135,10 +71,6 @@ module_param(qlen, uint, S_IRUGO|S_IWUSR);
  * descriptors are built on demand.
  */
 
-/* holds our biggest descriptor */
-#define USB_DESC_BUFSIZE		256
-#define USB_BUFSIZE			8192
-
 static struct usb_device_descriptor device_desc = {
 	.bLength =		sizeof device_desc,
 	.bDescriptorType =	USB_DT_DEVICE,
@@ -151,108 +83,6 @@ static struct usb_device_descriptor device_desc = {
 	.bNumConfigurations =	1
 };
 
-static struct usb_interface_descriptor intf_desc = {
-	.bLength =		sizeof intf_desc,
-	.bDescriptorType =	USB_DT_INTERFACE,
-	.bNumEndpoints =	2,
-	.bInterfaceClass =	USB_CLASS_PRINTER,
-	.bInterfaceSubClass =	1,	/* Printer Sub-Class */
-	.bInterfaceProtocol =	2,	/* Bi-Directional */
-	.iInterface =		0
-};
-
-static struct usb_endpoint_descriptor fs_ep_in_desc = {
-	.bLength =		USB_DT_ENDPOINT_SIZE,
-	.bDescriptorType =	USB_DT_ENDPOINT,
-	.bEndpointAddress =	USB_DIR_IN,
-	.bmAttributes =		USB_ENDPOINT_XFER_BULK
-};
-
-static struct usb_endpoint_descriptor fs_ep_out_desc = {
-	.bLength =		USB_DT_ENDPOINT_SIZE,
-	.bDescriptorType =	USB_DT_ENDPOINT,
-	.bEndpointAddress =	USB_DIR_OUT,
-	.bmAttributes =		USB_ENDPOINT_XFER_BULK
-};
-
-static struct usb_descriptor_header *fs_printer_function[] = {
-	(struct usb_descriptor_header *) &intf_desc,
-	(struct usb_descriptor_header *) &fs_ep_in_desc,
-	(struct usb_descriptor_header *) &fs_ep_out_desc,
-	NULL
-};
-
-/*
- * usb 2.0 devices need to expose both high speed and full speed
- * descriptors, unless they only run at full speed.
- */
-
-static struct usb_endpoint_descriptor hs_ep_in_desc = {
-	.bLength =		USB_DT_ENDPOINT_SIZE,
-	.bDescriptorType =	USB_DT_ENDPOINT,
-	.bmAttributes =		USB_ENDPOINT_XFER_BULK,
-	.wMaxPacketSize =	cpu_to_le16(512)
-};
-
-static struct usb_endpoint_descriptor hs_ep_out_desc = {
-	.bLength =		USB_DT_ENDPOINT_SIZE,
-	.bDescriptorType =	USB_DT_ENDPOINT,
-	.bmAttributes =		USB_ENDPOINT_XFER_BULK,
-	.wMaxPacketSize =	cpu_to_le16(512)
-};
-
-static struct usb_qualifier_descriptor dev_qualifier = {
-	.bLength =		sizeof dev_qualifier,
-	.bDescriptorType =	USB_DT_DEVICE_QUALIFIER,
-	.bcdUSB =		cpu_to_le16(0x0200),
-	.bDeviceClass =		USB_CLASS_PRINTER,
-	.bNumConfigurations =	1
-};
-
-static struct usb_descriptor_header *hs_printer_function[] = {
-	(struct usb_descriptor_header *) &intf_desc,
-	(struct usb_descriptor_header *) &hs_ep_in_desc,
-	(struct usb_descriptor_header *) &hs_ep_out_desc,
-	NULL
-};
-
-/*
- * Added endpoint descriptors for 3.0 devices
- */
-
-static struct usb_endpoint_descriptor ss_ep_in_desc = {
-	.bLength =              USB_DT_ENDPOINT_SIZE,
-	.bDescriptorType =      USB_DT_ENDPOINT,
-	.bmAttributes =         USB_ENDPOINT_XFER_BULK,
-	.wMaxPacketSize =       cpu_to_le16(1024),
-};
-
-static struct usb_ss_ep_comp_descriptor ss_ep_in_comp_desc = {
-	.bLength =              sizeof(ss_ep_in_comp_desc),
-	.bDescriptorType =      USB_DT_SS_ENDPOINT_COMP,
-};
-
-static struct usb_endpoint_descriptor ss_ep_out_desc = {
-	.bLength =              USB_DT_ENDPOINT_SIZE,
-	.bDescriptorType =      USB_DT_ENDPOINT,
-	.bmAttributes =         USB_ENDPOINT_XFER_BULK,
-	.wMaxPacketSize =       cpu_to_le16(1024),
-};
-
-static struct usb_ss_ep_comp_descriptor ss_ep_out_comp_desc = {
-	.bLength =              sizeof(ss_ep_out_comp_desc),
-	.bDescriptorType =      USB_DT_SS_ENDPOINT_COMP,
-};
-
-static struct usb_descriptor_header *ss_printer_function[] = {
-	(struct usb_descriptor_header *) &intf_desc,
-	(struct usb_descriptor_header *) &ss_ep_in_desc,
-	(struct usb_descriptor_header *) &ss_ep_in_comp_desc,
-	(struct usb_descriptor_header *) &ss_ep_out_desc,
-	(struct usb_descriptor_header *) &ss_ep_out_comp_desc,
-	NULL
-};
-
 static struct usb_otg_descriptor otg_descriptor = {
 	.bLength =              sizeof otg_descriptor,
 	.bDescriptorType =      USB_DT_OTG,
@@ -264,28 +94,10 @@ static const struct usb_descriptor_header *otg_desc[] = {
 	NULL,
 };
 
-/* maxpacket and other transfer characteristics vary by speed. */
-static inline struct usb_endpoint_descriptor *ep_desc(struct usb_gadget *gadget,
-					struct usb_endpoint_descriptor *fs,
-					struct usb_endpoint_descriptor *hs,
-					struct usb_endpoint_descriptor *ss)
-{
-	switch (gadget->speed) {
-	case USB_SPEED_SUPER:
-		return ss;
-	case USB_SPEED_HIGH:
-		return hs;
-	default:
-		return fs;
-	}
-}
-
 /*-------------------------------------------------------------------------*/
 
 /* descriptors that are built on-demand */
 
-#define PNP_STRING_LEN			1024
-
 static char				product_desc [40] = DRIVER_DESC;
 static char				serial_num [40] = "1";
 static char				pnp_string[PNP_STRING_LEN] =
@@ -309,1030 +121,12 @@ static struct usb_gadget_strings *dev_strings[] = {
 	NULL,
 };
 
-/*-------------------------------------------------------------------------*/
-
-static struct usb_request *
-printer_req_alloc(struct usb_ep *ep, unsigned len, gfp_t gfp_flags)
-{
-	struct usb_request	*req;
-
-	req = usb_ep_alloc_request(ep, gfp_flags);
-
-	if (req != NULL) {
-		req->length = len;
-		req->buf = kmalloc(len, gfp_flags);
-		if (req->buf == NULL) {
-			usb_ep_free_request(ep, req);
-			return NULL;
-		}
-	}
-
-	return req;
-}
-
-static void
-printer_req_free(struct usb_ep *ep, struct usb_request *req)
-{
-	if (ep != NULL && req != NULL) {
-		kfree(req->buf);
-		usb_ep_free_request(ep, req);
-	}
-}
-
-/*-------------------------------------------------------------------------*/
-
-static void rx_complete(struct usb_ep *ep, struct usb_request *req)
-{
-	struct printer_dev	*dev = ep->driver_data;
-	int			status = req->status;
-	unsigned long		flags;
-
-	spin_lock_irqsave(&dev->lock, flags);
-
-	list_del_init(&req->list);	/* Remode from Active List */
-
-	switch (status) {
-
-	/* normal completion */
-	case 0:
-		if (req->actual > 0) {
-			list_add_tail(&req->list, &dev->rx_buffers);
-			DBG(dev, "G_Printer : rx length %d\n", req->actual);
-		} else {
-			list_add(&req->list, &dev->rx_reqs);
-		}
-		break;
-
-	/* software-driven interface shutdown */
-	case -ECONNRESET:		/* unlink */
-	case -ESHUTDOWN:		/* disconnect etc */
-		VDBG(dev, "rx shutdown, code %d\n", status);
-		list_add(&req->list, &dev->rx_reqs);
-		break;
-
-	/* for hardware automagic (such as pxa) */
-	case -ECONNABORTED:		/* endpoint reset */
-		DBG(dev, "rx %s reset\n", ep->name);
-		list_add(&req->list, &dev->rx_reqs);
-		break;
-
-	/* data overrun */
-	case -EOVERFLOW:
-		/* FALLTHROUGH */
-
-	default:
-		DBG(dev, "rx status %d\n", status);
-		list_add(&req->list, &dev->rx_reqs);
-		break;
-	}
-
-	wake_up_interruptible(&dev->rx_wait);
-	spin_unlock_irqrestore(&dev->lock, flags);
-}
-
-static void tx_complete(struct usb_ep *ep, struct usb_request *req)
-{
-	struct printer_dev	*dev = ep->driver_data;
-
-	switch (req->status) {
-	default:
-		VDBG(dev, "tx err %d\n", req->status);
-		/* FALLTHROUGH */
-	case -ECONNRESET:		/* unlink */
-	case -ESHUTDOWN:		/* disconnect etc */
-		break;
-	case 0:
-		break;
-	}
-
-	spin_lock(&dev->lock);
-	/* Take the request struct off the active list and put it on the
-	 * free list.
-	 */
-	list_del_init(&req->list);
-	list_add(&req->list, &dev->tx_reqs);
-	wake_up_interruptible(&dev->tx_wait);
-	if (likely(list_empty(&dev->tx_reqs_active)))
-		wake_up_interruptible(&dev->tx_flush_wait);
-
-	spin_unlock(&dev->lock);
-}
-
-/*-------------------------------------------------------------------------*/
-
-static int
-printer_open(struct inode *inode, struct file *fd)
-{
-	struct printer_dev	*dev;
-	unsigned long		flags;
-	int			ret = -EBUSY;
-
-	dev = container_of(inode->i_cdev, struct printer_dev, printer_cdev);
-
-	spin_lock_irqsave(&dev->lock, flags);
-
-	if (!dev->printer_cdev_open) {
-		dev->printer_cdev_open = 1;
-		fd->private_data = dev;
-		ret = 0;
-		/* Change the printer status to show that it's on-line. */
-		dev->printer_status |= PRINTER_SELECTED;
-	}
-
-	spin_unlock_irqrestore(&dev->lock, flags);
-
-	DBG(dev, "printer_open returned %x\n", ret);
-	return ret;
-}
-
-static int
-printer_close(struct inode *inode, struct file *fd)
-{
-	struct printer_dev	*dev = fd->private_data;
-	unsigned long		flags;
-
-	spin_lock_irqsave(&dev->lock, flags);
-	dev->printer_cdev_open = 0;
-	fd->private_data = NULL;
-	/* Change printer status to show that the printer is off-line. */
-	dev->printer_status &= ~PRINTER_SELECTED;
-	spin_unlock_irqrestore(&dev->lock, flags);
-
-	DBG(dev, "printer_close\n");
-
-	return 0;
-}
-
-/* This function must be called with interrupts turned off. */
-static void
-setup_rx_reqs(struct printer_dev *dev)
-{
-	struct usb_request              *req;
-
-	while (likely(!list_empty(&dev->rx_reqs))) {
-		int error;
-
-		req = container_of(dev->rx_reqs.next,
-				struct usb_request, list);
-		list_del_init(&req->list);
-
-		/* The USB Host sends us whatever amount of data it wants to
-		 * so we always set the length field to the full USB_BUFSIZE.
-		 * If the amount of data is more than the read() caller asked
-		 * for it will be stored in the request buffer until it is
-		 * asked for by read().
-		 */
-		req->length = USB_BUFSIZE;
-		req->complete = rx_complete;
-
-		/* here, we unlock, and only unlock, to avoid deadlock. */
-		spin_unlock(&dev->lock);
-		error = usb_ep_queue(dev->out_ep, req, GFP_ATOMIC);
-		spin_lock(&dev->lock);
-		if (error) {
-			DBG(dev, "rx submit --> %d\n", error);
-			list_add(&req->list, &dev->rx_reqs);
-			break;
-		}
-		/* if the req is empty, then add it into dev->rx_reqs_active. */
-		else if (list_empty(&req->list)) {
-			list_add(&req->list, &dev->rx_reqs_active);
-		}
-	}
-}
-
-static ssize_t
-printer_read(struct file *fd, char __user *buf, size_t len, loff_t *ptr)
-{
-	struct printer_dev		*dev = fd->private_data;
-	unsigned long			flags;
-	size_t				size;
-	size_t				bytes_copied;
-	struct usb_request		*req;
-	/* This is a pointer to the current USB rx request. */
-	struct usb_request		*current_rx_req;
-	/* This is the number of bytes in the current rx buffer. */
-	size_t				current_rx_bytes;
-	/* This is a pointer to the current rx buffer. */
-	u8				*current_rx_buf;
-
-	if (len == 0)
-		return -EINVAL;
-
-	DBG(dev, "printer_read trying to read %d bytes\n", (int)len);
-
-	mutex_lock(&dev->lock_printer_io);
-	spin_lock_irqsave(&dev->lock, flags);
-
-	/* We will use this flag later to check if a printer reset happened
-	 * after we turn interrupts back on.
-	 */
-	dev->reset_printer = 0;
-
-	setup_rx_reqs(dev);
-
-	bytes_copied = 0;
-	current_rx_req = dev->current_rx_req;
-	current_rx_bytes = dev->current_rx_bytes;
-	current_rx_buf = dev->current_rx_buf;
-	dev->current_rx_req = NULL;
-	dev->current_rx_bytes = 0;
-	dev->current_rx_buf = NULL;
-
-	/* Check if there is any data in the read buffers. Please note that
-	 * current_rx_bytes is the number of bytes in the current rx buffer.
-	 * If it is zero then check if there are any other rx_buffers that
-	 * are on the completed list. We are only out of data if all rx
-	 * buffers are empty.
-	 */
-	if ((current_rx_bytes == 0) &&
-			(likely(list_empty(&dev->rx_buffers)))) {
-		/* Turn interrupts back on before sleeping. */
-		spin_unlock_irqrestore(&dev->lock, flags);
-
-		/*
-		 * If no data is available check if this is a NON-Blocking
-		 * call or not.
-		 */
-		if (fd->f_flags & (O_NONBLOCK|O_NDELAY)) {
-			mutex_unlock(&dev->lock_printer_io);
-			return -EAGAIN;
-		}
-
-		/* Sleep until data is available */
-		wait_event_interruptible(dev->rx_wait,
-				(likely(!list_empty(&dev->rx_buffers))));
-		spin_lock_irqsave(&dev->lock, flags);
-	}
-
-	/* We have data to return then copy it to the caller's buffer.*/
-	while ((current_rx_bytes || likely(!list_empty(&dev->rx_buffers)))
-			&& len) {
-		if (current_rx_bytes == 0) {
-			req = container_of(dev->rx_buffers.next,
-					struct usb_request, list);
-			list_del_init(&req->list);
-
-			if (req->actual && req->buf) {
-				current_rx_req = req;
-				current_rx_bytes = req->actual;
-				current_rx_buf = req->buf;
-			} else {
-				list_add(&req->list, &dev->rx_reqs);
-				continue;
-			}
-		}
-
-		/* Don't leave irqs off while doing memory copies */
-		spin_unlock_irqrestore(&dev->lock, flags);
-
-		if (len > current_rx_bytes)
-			size = current_rx_bytes;
-		else
-			size = len;
-
-		size -= copy_to_user(buf, current_rx_buf, size);
-		bytes_copied += size;
-		len -= size;
-		buf += size;
-
-		spin_lock_irqsave(&dev->lock, flags);
-
-		/* We've disconnected or reset so return. */
-		if (dev->reset_printer) {
-			list_add(&current_rx_req->list, &dev->rx_reqs);
-			spin_unlock_irqrestore(&dev->lock, flags);
-			mutex_unlock(&dev->lock_printer_io);
-			return -EAGAIN;
-		}
-
-		/* If we not returning all the data left in this RX request
-		 * buffer then adjust the amount of data left in the buffer.
-		 * Othewise if we are done with this RX request buffer then
-		 * requeue it to get any incoming data from the USB host.
-		 */
-		if (size < current_rx_bytes) {
-			current_rx_bytes -= size;
-			current_rx_buf += size;
-		} else {
-			list_add(&current_rx_req->list, &dev->rx_reqs);
-			current_rx_bytes = 0;
-			current_rx_buf = NULL;
-			current_rx_req = NULL;
-		}
-	}
-
-	dev->current_rx_req = current_rx_req;
-	dev->current_rx_bytes = current_rx_bytes;
-	dev->current_rx_buf = current_rx_buf;
-
-	spin_unlock_irqrestore(&dev->lock, flags);
-	mutex_unlock(&dev->lock_printer_io);
-
-	DBG(dev, "printer_read returned %d bytes\n", (int)bytes_copied);
-
-	if (bytes_copied)
-		return bytes_copied;
-	else
-		return -EAGAIN;
-}
-
-static ssize_t
-printer_write(struct file *fd, const char __user *buf, size_t len, loff_t *ptr)
-{
-	struct printer_dev	*dev = fd->private_data;
-	unsigned long		flags;
-	size_t			size;	/* Amount of data in a TX request. */
-	size_t			bytes_copied = 0;
-	struct usb_request	*req;
-
-	DBG(dev, "printer_write trying to send %d bytes\n", (int)len);
-
-	if (len == 0)
-		return -EINVAL;
-
-	mutex_lock(&dev->lock_printer_io);
-	spin_lock_irqsave(&dev->lock, flags);
-
-	/* Check if a printer reset happens while we have interrupts on */
-	dev->reset_printer = 0;
-
-	/* Check if there is any available write buffers */
-	if (likely(list_empty(&dev->tx_reqs))) {
-		/* Turn interrupts back on before sleeping. */
-		spin_unlock_irqrestore(&dev->lock, flags);
-
-		/*
-		 * If write buffers are available check if this is
-		 * a NON-Blocking call or not.
-		 */
-		if (fd->f_flags & (O_NONBLOCK|O_NDELAY)) {
-			mutex_unlock(&dev->lock_printer_io);
-			return -EAGAIN;
-		}
-
-		/* Sleep until a write buffer is available */
-		wait_event_interruptible(dev->tx_wait,
-				(likely(!list_empty(&dev->tx_reqs))));
-		spin_lock_irqsave(&dev->lock, flags);
-	}
-
-	while (likely(!list_empty(&dev->tx_reqs)) && len) {
-
-		if (len > USB_BUFSIZE)
-			size = USB_BUFSIZE;
-		else
-			size = len;
-
-		req = container_of(dev->tx_reqs.next, struct usb_request,
-				list);
-		list_del_init(&req->list);
-
-		req->complete = tx_complete;
-		req->length = size;
-
-		/* Check if we need to send a zero length packet. */
-		if (len > size)
-			/* They will be more TX requests so no yet. */
-			req->zero = 0;
-		else
-			/* If the data amount is not a multple of the
-			 * maxpacket size then send a zero length packet.
-			 */
-			req->zero = ((len % dev->in_ep->maxpacket) == 0);
-
-		/* Don't leave irqs off while doing memory copies */
-		spin_unlock_irqrestore(&dev->lock, flags);
-
-		if (copy_from_user(req->buf, buf, size)) {
-			list_add(&req->list, &dev->tx_reqs);
-			mutex_unlock(&dev->lock_printer_io);
-			return bytes_copied;
-		}
-
-		bytes_copied += size;
-		len -= size;
-		buf += size;
-
-		spin_lock_irqsave(&dev->lock, flags);
-
-		/* We've disconnected or reset so free the req and buffer */
-		if (dev->reset_printer) {
-			list_add(&req->list, &dev->tx_reqs);
-			spin_unlock_irqrestore(&dev->lock, flags);
-			mutex_unlock(&dev->lock_printer_io);
-			return -EAGAIN;
-		}
-
-		if (usb_ep_queue(dev->in_ep, req, GFP_ATOMIC)) {
-			list_add(&req->list, &dev->tx_reqs);
-			spin_unlock_irqrestore(&dev->lock, flags);
-			mutex_unlock(&dev->lock_printer_io);
-			return -EAGAIN;
-		}
-
-		list_add(&req->list, &dev->tx_reqs_active);
-
-	}
-
-	spin_unlock_irqrestore(&dev->lock, flags);
-	mutex_unlock(&dev->lock_printer_io);
-
-	DBG(dev, "printer_write sent %d bytes\n", (int)bytes_copied);
-
-	if (bytes_copied) {
-		return bytes_copied;
-	} else {
-		return -EAGAIN;
-	}
-}
-
-static int
-printer_fsync(struct file *fd, loff_t start, loff_t end, int datasync)
-{
-	struct printer_dev	*dev = fd->private_data;
-	struct inode *inode = file_inode(fd);
-	unsigned long		flags;
-	int			tx_list_empty;
-
-	mutex_lock(&inode->i_mutex);
-	spin_lock_irqsave(&dev->lock, flags);
-	tx_list_empty = (likely(list_empty(&dev->tx_reqs)));
-	spin_unlock_irqrestore(&dev->lock, flags);
-
-	if (!tx_list_empty) {
-		/* Sleep until all data has been sent */
-		wait_event_interruptible(dev->tx_flush_wait,
-				(likely(list_empty(&dev->tx_reqs_active))));
-	}
-	mutex_unlock(&inode->i_mutex);
-
-	return 0;
-}
-
-static unsigned int
-printer_poll(struct file *fd, poll_table *wait)
-{
-	struct printer_dev	*dev = fd->private_data;
-	unsigned long		flags;
-	int			status = 0;
-
-	mutex_lock(&dev->lock_printer_io);
-	spin_lock_irqsave(&dev->lock, flags);
-	setup_rx_reqs(dev);
-	spin_unlock_irqrestore(&dev->lock, flags);
-	mutex_unlock(&dev->lock_printer_io);
-
-	poll_wait(fd, &dev->rx_wait, wait);
-	poll_wait(fd, &dev->tx_wait, wait);
-
-	spin_lock_irqsave(&dev->lock, flags);
-	if (likely(!list_empty(&dev->tx_reqs)))
-		status |= POLLOUT | POLLWRNORM;
-
-	if (likely(dev->current_rx_bytes) ||
-			likely(!list_empty(&dev->rx_buffers)))
-		status |= POLLIN | POLLRDNORM;
-
-	spin_unlock_irqrestore(&dev->lock, flags);
-
-	return status;
-}
-
-static long
-printer_ioctl(struct file *fd, unsigned int code, unsigned long arg)
-{
-	struct printer_dev	*dev = fd->private_data;
-	unsigned long		flags;
-	int			status = 0;
-
-	DBG(dev, "printer_ioctl: cmd=0x%4.4x, arg=%lu\n", code, arg);
-
-	/* handle ioctls */
-
-	spin_lock_irqsave(&dev->lock, flags);
-
-	switch (code) {
-	case GADGET_GET_PRINTER_STATUS:
-		status = (int)dev->printer_status;
-		break;
-	case GADGET_SET_PRINTER_STATUS:
-		dev->printer_status = (u8)arg;
-		break;
-	default:
-		/* could not handle ioctl */
-		DBG(dev, "printer_ioctl: ERROR cmd=0x%4.4xis not supported\n",
-				code);
-		status = -ENOTTY;
-	}
-
-	spin_unlock_irqrestore(&dev->lock, flags);
-
-	return status;
-}
-
-/* used after endpoint configuration */
-static const struct file_operations printer_io_operations = {
-	.owner =	THIS_MODULE,
-	.open =		printer_open,
-	.read =		printer_read,
-	.write =	printer_write,
-	.fsync =	printer_fsync,
-	.poll =		printer_poll,
-	.unlocked_ioctl = printer_ioctl,
-	.release =	printer_close,
-	.llseek =	noop_llseek,
-};
-
-/*-------------------------------------------------------------------------*/
-
-static int
-set_printer_interface(struct printer_dev *dev)
-{
-	int			result = 0;
-
-	dev->in_ep->desc = ep_desc(dev->gadget, &fs_ep_in_desc, &hs_ep_in_desc,
-				&ss_ep_in_desc);
-	dev->in_ep->driver_data = dev;
-
-	dev->out_ep->desc = ep_desc(dev->gadget, &fs_ep_out_desc,
-				    &hs_ep_out_desc, &ss_ep_out_desc);
-	dev->out_ep->driver_data = dev;
-
-	result = usb_ep_enable(dev->in_ep);
-	if (result != 0) {
-		DBG(dev, "enable %s --> %d\n", dev->in_ep->name, result);
-		goto done;
-	}
-
-	result = usb_ep_enable(dev->out_ep);
-	if (result != 0) {
-		DBG(dev, "enable %s --> %d\n", dev->in_ep->name, result);
-		goto done;
-	}
-
-done:
-	/* on error, disable any endpoints  */
-	if (result != 0) {
-		(void) usb_ep_disable(dev->in_ep);
-		(void) usb_ep_disable(dev->out_ep);
-		dev->in_ep->desc = NULL;
-		dev->out_ep->desc = NULL;
-	}
-
-	/* caller is responsible for cleanup on error */
-	return result;
-}
-
-static void printer_reset_interface(struct printer_dev *dev)
-{
-	if (dev->interface < 0)
-		return;
-
-	DBG(dev, "%s\n", __func__);
-
-	if (dev->in_ep->desc)
-		usb_ep_disable(dev->in_ep);
-
-	if (dev->out_ep->desc)
-		usb_ep_disable(dev->out_ep);
-
-	dev->in_ep->desc = NULL;
-	dev->out_ep->desc = NULL;
-	dev->interface = -1;
-}
-
-/* Change our operational Interface. */
-static int set_interface(struct printer_dev *dev, unsigned number)
-{
-	int			result = 0;
-
-	/* Free the current interface */
-	printer_reset_interface(dev);
-
-	result = set_printer_interface(dev);
-	if (result)
-		printer_reset_interface(dev);
-	else
-		dev->interface = number;
-
-	if (!result)
-		INFO(dev, "Using interface %x\n", number);
-
-	return result;
-}
-
-static void printer_soft_reset(struct printer_dev *dev)
-{
-	struct usb_request	*req;
-
-	INFO(dev, "Received Printer Reset Request\n");
-
-	if (usb_ep_disable(dev->in_ep))
-		DBG(dev, "Failed to disable USB in_ep\n");
-	if (usb_ep_disable(dev->out_ep))
-		DBG(dev, "Failed to disable USB out_ep\n");
-
-	if (dev->current_rx_req != NULL) {
-		list_add(&dev->current_rx_req->list, &dev->rx_reqs);
-		dev->current_rx_req = NULL;
-	}
-	dev->current_rx_bytes = 0;
-	dev->current_rx_buf = NULL;
-	dev->reset_printer = 1;
-
-	while (likely(!(list_empty(&dev->rx_buffers)))) {
-		req = container_of(dev->rx_buffers.next, struct usb_request,
-				list);
-		list_del_init(&req->list);
-		list_add(&req->list, &dev->rx_reqs);
-	}
-
-	while (likely(!(list_empty(&dev->rx_reqs_active)))) {
-		req = container_of(dev->rx_buffers.next, struct usb_request,
-				list);
-		list_del_init(&req->list);
-		list_add(&req->list, &dev->rx_reqs);
-	}
-
-	while (likely(!(list_empty(&dev->tx_reqs_active)))) {
-		req = container_of(dev->tx_reqs_active.next,
-				struct usb_request, list);
-		list_del_init(&req->list);
-		list_add(&req->list, &dev->tx_reqs);
-	}
-
-	if (usb_ep_enable(dev->in_ep))
-		DBG(dev, "Failed to enable USB in_ep\n");
-	if (usb_ep_enable(dev->out_ep))
-		DBG(dev, "Failed to enable USB out_ep\n");
-
-	wake_up_interruptible(&dev->rx_wait);
-	wake_up_interruptible(&dev->tx_wait);
-	wake_up_interruptible(&dev->tx_flush_wait);
-}
-
-/*-------------------------------------------------------------------------*/
-
-static bool gprinter_req_match(struct usb_function *f,
-			       const struct usb_ctrlrequest *ctrl)
-{
-	struct printer_dev	*dev = func_to_printer(f);
-	u16			w_index = le16_to_cpu(ctrl->wIndex);
-	u16			w_value = le16_to_cpu(ctrl->wValue);
-	u16			w_length = le16_to_cpu(ctrl->wLength);
-
-	if ((ctrl->bRequestType & USB_RECIP_MASK) != USB_RECIP_INTERFACE ||
-	    (ctrl->bRequestType & USB_TYPE_MASK) != USB_TYPE_CLASS)
-		return false;
-
-	switch (ctrl->bRequest) {
-	case GET_DEVICE_ID:
-		w_index >>= 8;
-		if (w_length <= PNP_STRING_LEN &&
-		    (USB_DIR_IN & ctrl->bRequestType))
-			break;
-		return false;
-	case GET_PORT_STATUS:
-		if (!w_value && w_length == 1 &&
-		    (USB_DIR_IN & ctrl->bRequestType))
-			break;
-		return false;
-	case SOFT_RESET:
-		if (!w_value && !w_length &&
-		   (USB_DIR_OUT & ctrl->bRequestType))
-			break;
-		/* fall through */
-	default:
-		return false;
-	}
-	return w_index == dev->interface;
-}
-
-/*
- * The setup() callback implements all the ep0 functionality that's not
- * handled lower down.
- */
-static int printer_func_setup(struct usb_function *f,
-		const struct usb_ctrlrequest *ctrl)
-{
-	struct printer_dev *dev = func_to_printer(f);
-	struct usb_composite_dev *cdev = f->config->cdev;
-	struct usb_request	*req = cdev->req;
-	int			value = -EOPNOTSUPP;
-	u16			wIndex = le16_to_cpu(ctrl->wIndex);
-	u16			wValue = le16_to_cpu(ctrl->wValue);
-	u16			wLength = le16_to_cpu(ctrl->wLength);
-
-	DBG(dev, "ctrl req%02x.%02x v%04x i%04x l%d\n",
-		ctrl->bRequestType, ctrl->bRequest, wValue, wIndex, wLength);
-
-	switch (ctrl->bRequestType&USB_TYPE_MASK) {
-	case USB_TYPE_CLASS:
-		switch (ctrl->bRequest) {
-		case GET_DEVICE_ID: /* Get the IEEE-1284 PNP String */
-			/* Only one printer interface is supported. */
-			if ((wIndex>>8) != dev->interface)
-				break;
-
-			value = (dev->pnp_string[0] << 8) | dev->pnp_string[1];
-			memcpy(req->buf, dev->pnp_string, value);
-			DBG(dev, "1284 PNP String: %x %s\n", value,
-					&dev->pnp_string[2]);
-			break;
-
-		case GET_PORT_STATUS: /* Get Port Status */
-			/* Only one printer interface is supported. */
-			if (wIndex != dev->interface)
-				break;
-
-			*(u8 *)req->buf = dev->printer_status;
-			value = min(wLength, (u16) 1);
-			break;
-
-		case SOFT_RESET: /* Soft Reset */
-			/* Only one printer interface is supported. */
-			if (wIndex != dev->interface)
-				break;
-
-			printer_soft_reset(dev);
-
-			value = 0;
-			break;
-
-		default:
-			goto unknown;
-		}
-		break;
-
-	default:
-unknown:
-		VDBG(dev,
-			"unknown ctrl req%02x.%02x v%04x i%04x l%d\n",
-			ctrl->bRequestType, ctrl->bRequest,
-			wValue, wIndex, wLength);
-		break;
-	}
-	/* host either stalls (value < 0) or reports success */
-	if (value >= 0) {
-		req->length = value;
-		req->zero = value < wLength;
-		value = usb_ep_queue(cdev->gadget->ep0, req, GFP_ATOMIC);
-		if (value < 0) {
-			ERROR(dev, "%s:%d Error!\n", __func__, __LINE__);
-			req->status = 0;
-		}
-	}
-	return value;
-}
-
-static int __init printer_func_bind(struct usb_configuration *c,
-		struct usb_function *f)
-{
-	struct usb_gadget *gadget = c->cdev->gadget;
-	struct printer_dev *dev = func_to_printer(f);
-	struct device *pdev;
-	struct usb_composite_dev *cdev = c->cdev;
-	struct usb_ep *in_ep;
-	struct usb_ep *out_ep = NULL;
-	struct usb_request *req;
-	dev_t devt;
-	int id;
-	int ret;
-	u32 i;
-
-	id = usb_interface_id(c, f);
-	if (id < 0)
-		return id;
-	intf_desc.bInterfaceNumber = id;
-
-	/* finish hookup to lower layer ... */
-	dev->gadget = gadget;
-
-	/* all we really need is bulk IN/OUT */
-	in_ep = usb_ep_autoconfig(cdev->gadget, &fs_ep_in_desc);
-	if (!in_ep) {
-autoconf_fail:
-		dev_err(&cdev->gadget->dev, "can't autoconfigure on %s\n",
-			cdev->gadget->name);
-		return -ENODEV;
-	}
-	in_ep->driver_data = in_ep;	/* claim */
-
-	out_ep = usb_ep_autoconfig(cdev->gadget, &fs_ep_out_desc);
-	if (!out_ep)
-		goto autoconf_fail;
-	out_ep->driver_data = out_ep;	/* claim */
-
-	/* assumes that all endpoints are dual-speed */
-	hs_ep_in_desc.bEndpointAddress = fs_ep_in_desc.bEndpointAddress;
-	hs_ep_out_desc.bEndpointAddress = fs_ep_out_desc.bEndpointAddress;
-	ss_ep_in_desc.bEndpointAddress = fs_ep_in_desc.bEndpointAddress;
-	ss_ep_out_desc.bEndpointAddress = fs_ep_out_desc.bEndpointAddress;
-
-	ret = usb_assign_descriptors(f, fs_printer_function,
-			hs_printer_function, ss_printer_function);
-	if (ret)
-		return ret;
-
-	dev->in_ep = in_ep;
-	dev->out_ep = out_ep;
-
-	ret = -ENOMEM;
-	for (i = 0; i < dev->q_len; i++) {
-		req = printer_req_alloc(dev->in_ep, USB_BUFSIZE, GFP_KERNEL);
-		if (!req)
-			goto fail_tx_reqs;
-		list_add(&req->list, &dev->tx_reqs);
-	}
-
-	for (i = 0; i < dev->q_len; i++) {
-		req = printer_req_alloc(dev->out_ep, USB_BUFSIZE, GFP_KERNEL);
-		if (!req)
-			goto fail_rx_reqs;
-		list_add(&req->list, &dev->rx_reqs);
-	}
-
-	/* Setup the sysfs files for the printer gadget. */
-	devt = MKDEV(major, dev->minor);
-	pdev = device_create(usb_gadget_class, NULL, devt,
-				  NULL, "g_printer%d", dev->minor);
-	if (IS_ERR(pdev)) {
-		ERROR(dev, "Failed to create device: g_printer\n");
-		ret = PTR_ERR(pdev);
-		goto fail_rx_reqs;
-	}
-
-	/*
-	 * Register a character device as an interface to a user mode
-	 * program that handles the printer specific functionality.
-	 */
-	cdev_init(&dev->printer_cdev, &printer_io_operations);
-	dev->printer_cdev.owner = THIS_MODULE;
-	ret = cdev_add(&dev->printer_cdev, devt, 1);
-	if (ret) {
-		ERROR(dev, "Failed to open char device\n");
-		goto fail_cdev_add;
-	}
-
-	return 0;
-
-fail_cdev_add:
-	device_destroy(usb_gadget_class, devt);
-
-fail_rx_reqs:
-	while (!list_empty(&dev->rx_reqs)) {
-		req = container_of(dev->rx_reqs.next, struct usb_request, list);
-		list_del(&req->list);
-		printer_req_free(dev->out_ep, req);
-	}
-
-fail_tx_reqs:
-	while (!list_empty(&dev->tx_reqs)) {
-		req = container_of(dev->tx_reqs.next, struct usb_request, list);
-		list_del(&req->list);
-		printer_req_free(dev->in_ep, req);
-	}
-
-	return ret;
-
-}
-
-static void printer_func_unbind(struct usb_configuration *c,
-		struct usb_function *f)
-{
-	struct printer_dev	*dev;
-	struct usb_request	*req;
-
-	dev = func_to_printer(f);
-
-	device_destroy(usb_gadget_class, MKDEV(major, dev->minor));
-
-	/* Remove Character Device */
-	cdev_del(&dev->printer_cdev);
-
-	/* we must already have been disconnected ... no i/o may be active */
-	WARN_ON(!list_empty(&dev->tx_reqs_active));
-	WARN_ON(!list_empty(&dev->rx_reqs_active));
-
-	/* Free all memory for this driver. */
-	while (!list_empty(&dev->tx_reqs)) {
-		req = container_of(dev->tx_reqs.next, struct usb_request,
-				list);
-		list_del(&req->list);
-		printer_req_free(dev->in_ep, req);
-	}
-
-	if (dev->current_rx_req != NULL)
-		printer_req_free(dev->out_ep, dev->current_rx_req);
-
-	while (!list_empty(&dev->rx_reqs)) {
-		req = container_of(dev->rx_reqs.next,
-				struct usb_request, list);
-		list_del(&req->list);
-		printer_req_free(dev->out_ep, req);
-	}
-
-	while (!list_empty(&dev->rx_buffers)) {
-		req = container_of(dev->rx_buffers.next,
-				struct usb_request, list);
-		list_del(&req->list);
-		printer_req_free(dev->out_ep, req);
-	}
-	usb_free_all_descriptors(f);
-	kfree(dev);
-}
-
-static int printer_func_set_alt(struct usb_function *f,
-		unsigned intf, unsigned alt)
-{
-	struct printer_dev *dev = func_to_printer(f);
-	int ret = -ENOTSUPP;
-
-	if (!alt)
-		ret = set_interface(dev, intf);
-
-	return ret;
-}
-
-static void printer_func_disable(struct usb_function *f)
-{
-	struct printer_dev *dev = func_to_printer(f);
-	unsigned long		flags;
-
-	DBG(dev, "%s\n", __func__);
-
-	spin_lock_irqsave(&dev->lock, flags);
-	printer_reset_interface(dev);
-	spin_unlock_irqrestore(&dev->lock, flags);
-}
-
 static struct usb_configuration printer_cfg_driver = {
 	.label			= "printer",
 	.bConfigurationValue	= 1,
 	.bmAttributes		= USB_CONFIG_ATT_ONE | USB_CONFIG_ATT_SELFPOWER,
 };
 
-static int f_printer_bind_config(struct usb_configuration *c, char *pnp_str,
-				 char *pnp_string, unsigned q_len, int minor)
-{
-	struct printer_dev	*dev;
-	int			status = -ENOMEM;
-	size_t			len;
-
-	if (minor >= minors)
-		return -ENOENT;
-
-	dev = kzalloc(sizeof(*dev), GFP_KERNEL);
-	if (!dev)
-		return -ENOMEM;
-
-	dev->pnp_string = pnp_string;
-	dev->minor = minor;
-
-	dev->function.name = shortname;
-	dev->function.bind = printer_func_bind;
-	dev->function.setup = printer_func_setup;
-	dev->function.unbind = printer_func_unbind;
-	dev->function.set_alt = printer_func_set_alt;
-	dev->function.disable = printer_func_disable;
-	dev->function.req_match = gprinter_req_match;
-	INIT_LIST_HEAD(&dev->tx_reqs);
-	INIT_LIST_HEAD(&dev->rx_reqs);
-	INIT_LIST_HEAD(&dev->rx_buffers);
-
-	if (pnp_str)
-		strlcpy(&dev->pnp_string[2], pnp_str, PNP_STRING_LEN - 2);
-
-	len = strlen(pnp_string);
-	pnp_string[0] = (len >> 8) & 0xFF;
-	pnp_string[1] = len & 0xFF;
-
-	spin_lock_init(&dev->lock);
-	mutex_init(&dev->lock_printer_io);
-	INIT_LIST_HEAD(&dev->tx_reqs_active);
-	INIT_LIST_HEAD(&dev->rx_reqs_active);
-	init_waitqueue_head(&dev->rx_wait);
-	init_waitqueue_head(&dev->tx_wait);
-	init_waitqueue_head(&dev->tx_flush_wait);
-
-	dev->interface = -1;
-	dev->printer_cdev_open = 0;
-	dev->printer_status = PRINTER_NOT_ERROR;
-	dev->current_rx_req = NULL;
-	dev->current_rx_bytes = 0;
-	dev->current_rx_buf = NULL;
-	dev->q_len = q_len;
-
-	status = usb_add_function(c, &dev->function);
-	if (status) {
-		kfree(dev);
-		return status;
-	}
-	INFO(dev, "%s, version: " DRIVER_VERSION "\n", driver_desc);
-	return 0;
-}
-
 static int __init printer_do_config(struct usb_configuration *c)
 {
 	struct usb_gadget	*gadget = c->cdev->gadget;
@@ -1350,43 +144,6 @@ static int __init printer_do_config(struct usb_configuration *c)
 	return f_printer_bind_config(c, iPNPstring, pnp_string, QLEN, 0);
 }
 
-static int gprinter_setup(int count)
-{
-	int status;
-	dev_t devt;
-
-	usb_gadget_class = class_create(THIS_MODULE, "usb_printer_gadget");
-	if (IS_ERR(usb_gadget_class)) {
-		status = PTR_ERR(usb_gadget_class);
-		usb_gadget_class = NULL;
-		pr_err("unable to create usb_gadget class %d\n", status);
-		return status;
-	}
-
-	status = alloc_chrdev_region(&devt, 0, count, "USB printer gadget");
-	if (status) {
-		pr_err("alloc_chrdev_region %d\n", status);
-		class_destroy(usb_gadget_class);
-		usb_gadget_class = NULL;
-		return status;
-	}
-
-	major = MAJOR(devt);
-	minors = count;
-
-	return status;
-}
-
-static void gprinter_cleanup(void)
-{
-	if (major) {
-		unregister_chrdev_region(MKDEV(major, 0), minors);
-		major = minors = 0;
-	}
-	class_destroy(usb_gadget_class);
-	usb_gadget_class = NULL;
-}
-
 static int __init printer_bind(struct usb_composite_dev *cdev)
 {
 	int ret;
-- 
cgit v1.2.3-59-g8ed1b


From b26394bd567e5ebe57ec4dee7fe6cd14023c96e9 Mon Sep 17 00:00:00 2001
From: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
Date: Tue, 3 Mar 2015 10:52:28 +0100
Subject: usb: gadget: f_printer: convert to new function interface with
 backward compatibility

In order to add configfs support, a usb function must be converted to use
the new interface. This patch converts the function to the new interface
and provides backward compatiblity layer, which can be removed after
all its users are converted to use the new interface.

Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
---
 drivers/usb/gadget/Kconfig              |   3 +
 drivers/usb/gadget/function/Makefile    |   2 +
 drivers/usb/gadget/function/f_printer.c | 185 +++++++++++++++++++++++++++++++-
 drivers/usb/gadget/function/u_printer.h |  30 ++++++
 drivers/usb/gadget/legacy/printer.c     |   1 +
 5 files changed, 220 insertions(+), 1 deletion(-)
 create mode 100644 drivers/usb/gadget/function/u_printer.h

(limited to 'drivers/usb')

diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig
index b454d05be583..9d507cf98f94 100644
--- a/drivers/usb/gadget/Kconfig
+++ b/drivers/usb/gadget/Kconfig
@@ -196,6 +196,9 @@ config USB_F_MIDI
 config USB_F_HID
 	tristate
 
+config USB_F_PRINTER
+	tristate
+
 choice
 	tristate "USB Gadget Drivers"
 	default USB_ETH
diff --git a/drivers/usb/gadget/function/Makefile b/drivers/usb/gadget/function/Makefile
index f71b1aaa0edf..bd7def576955 100644
--- a/drivers/usb/gadget/function/Makefile
+++ b/drivers/usb/gadget/function/Makefile
@@ -42,3 +42,5 @@ usb_f_midi-y			:= f_midi.o
 obj-$(CONFIG_USB_F_MIDI)	+= usb_f_midi.o
 usb_f_hid-y			:= f_hid.o
 obj-$(CONFIG_USB_F_HID)		+= usb_f_hid.o
+usb_f_printer-y			:= f_printer.o
+obj-$(CONFIG_USB_F_PRINTER)	+= usb_f_printer.o
diff --git a/drivers/usb/gadget/function/f_printer.c b/drivers/usb/gadget/function/f_printer.c
index 0847972b9686..93f4d4e61fef 100644
--- a/drivers/usb/gadget/function/f_printer.c
+++ b/drivers/usb/gadget/function/f_printer.c
@@ -24,6 +24,7 @@
 #include <linux/mutex.h>
 #include <linux/errno.h>
 #include <linux/init.h>
+#include <linux/idr.h>
 #include <linux/timer.h>
 #include <linux/list.h>
 #include <linux/interrupt.h>
@@ -46,6 +47,8 @@
 #include <linux/usb/gadget.h>
 #include <linux/usb/g_printer.h>
 
+#include "u_printer.h"
+
 #define PNP_STRING_LEN		1024
 #define PRINTER_MINORS		4
 #define GET_DEVICE_ID		0
@@ -54,6 +57,10 @@
 
 static int major, minors;
 static struct class *usb_gadget_class;
+#ifndef USBF_PRINTER_INCLUDED
+static DEFINE_IDA(printer_ida);
+static DEFINE_MUTEX(printer_ida_lock); /* protects access do printer_ida */
+#endif
 
 /*-------------------------------------------------------------------------*/
 
@@ -999,7 +1006,7 @@ unknown:
 	return value;
 }
 
-static int __init printer_func_bind(struct usb_configuration *c,
+static int printer_func_bind(struct usb_configuration *c,
 		struct usb_function *f)
 {
 	struct usb_gadget *gadget = c->cdev->gadget;
@@ -1111,6 +1118,7 @@ fail_tx_reqs:
 
 }
 
+#ifdef USBF_PRINTER_INCLUDED
 static void printer_func_unbind(struct usb_configuration *c,
 		struct usb_function *f)
 {
@@ -1155,6 +1163,7 @@ static void printer_func_unbind(struct usb_configuration *c,
 	usb_free_all_descriptors(f);
 	kfree(dev);
 }
+#endif
 
 static int printer_func_set_alt(struct usb_function *f,
 		unsigned intf, unsigned alt)
@@ -1180,6 +1189,7 @@ static void printer_func_disable(struct usb_function *f)
 	spin_unlock_irqrestore(&dev->lock, flags);
 }
 
+#ifdef USBF_PRINTER_INCLUDED
 static int f_printer_bind_config(struct usb_configuration *c, char *pnp_str,
 				 char *pnp_string, unsigned q_len, int minor)
 {
@@ -1240,6 +1250,179 @@ static int f_printer_bind_config(struct usb_configuration *c, char *pnp_str,
 	INFO(dev, "%s, version: " DRIVER_VERSION "\n", driver_desc);
 	return 0;
 }
+#else
+static inline int gprinter_get_minor(void)
+{
+	return ida_simple_get(&printer_ida, 0, 0, GFP_KERNEL);
+}
+
+static inline void gprinter_put_minor(int minor)
+{
+	ida_simple_remove(&printer_ida, minor);
+}
+
+static int gprinter_setup(int);
+static void gprinter_cleanup(void);
+
+static void gprinter_free_inst(struct usb_function_instance *f)
+{
+	struct f_printer_opts *opts;
+
+	opts = container_of(f, struct f_printer_opts, func_inst);
+
+	mutex_lock(&printer_ida_lock);
+
+	gprinter_put_minor(opts->minor);
+	if (idr_is_empty(&printer_ida.idr))
+		gprinter_cleanup();
+
+	mutex_unlock(&printer_ida_lock);
+
+	kfree(opts);
+}
+
+static struct usb_function_instance *gprinter_alloc_inst(void)
+{
+	struct f_printer_opts *opts;
+	struct usb_function_instance *ret;
+	int status = 0;
+
+	opts = kzalloc(sizeof(*opts), GFP_KERNEL);
+	if (!opts)
+		return ERR_PTR(-ENOMEM);
+
+	opts->func_inst.free_func_inst = gprinter_free_inst;
+	ret = &opts->func_inst;
+
+	mutex_lock(&printer_ida_lock);
+
+	if (idr_is_empty(&printer_ida.idr)) {
+		status = gprinter_setup(PRINTER_MINORS);
+		if (status) {
+			ret = ERR_PTR(status);
+			kfree(opts);
+			goto unlock;
+		}
+	}
+
+	opts->minor = gprinter_get_minor();
+	if (opts->minor < 0) {
+		ret = ERR_PTR(opts->minor);
+		kfree(opts);
+		if (idr_is_empty(&printer_ida.idr))
+			gprinter_cleanup();
+	}
+
+unlock:
+	mutex_unlock(&printer_ida_lock);
+	return ret;
+}
+
+static void gprinter_free(struct usb_function *f)
+{
+	struct printer_dev *dev = func_to_printer(f);
+
+	kfree(dev);
+}
+
+static void printer_func_unbind(struct usb_configuration *c,
+		struct usb_function *f)
+{
+	struct printer_dev	*dev;
+	struct usb_request	*req;
+
+	dev = func_to_printer(f);
+
+	device_destroy(usb_gadget_class, MKDEV(major, dev->minor));
+
+	/* Remove Character Device */
+	cdev_del(&dev->printer_cdev);
+
+	/* we must already have been disconnected ... no i/o may be active */
+	WARN_ON(!list_empty(&dev->tx_reqs_active));
+	WARN_ON(!list_empty(&dev->rx_reqs_active));
+
+	/* Free all memory for this driver. */
+	while (!list_empty(&dev->tx_reqs)) {
+		req = container_of(dev->tx_reqs.next, struct usb_request,
+				list);
+		list_del(&req->list);
+		printer_req_free(dev->in_ep, req);
+	}
+
+	if (dev->current_rx_req != NULL)
+		printer_req_free(dev->out_ep, dev->current_rx_req);
+
+	while (!list_empty(&dev->rx_reqs)) {
+		req = container_of(dev->rx_reqs.next,
+				struct usb_request, list);
+		list_del(&req->list);
+		printer_req_free(dev->out_ep, req);
+	}
+
+	while (!list_empty(&dev->rx_buffers)) {
+		req = container_of(dev->rx_buffers.next,
+				struct usb_request, list);
+		list_del(&req->list);
+		printer_req_free(dev->out_ep, req);
+	}
+	usb_free_all_descriptors(f);
+}
+
+static struct usb_function *gprinter_alloc(struct usb_function_instance *fi)
+{
+	struct printer_dev	*dev;
+	struct f_printer_opts	*opts;
+
+	opts = container_of(fi, struct f_printer_opts, func_inst);
+
+	if (opts->minor >= minors)
+		return ERR_PTR(-ENOENT);
+
+	dev = kzalloc(sizeof(*dev), GFP_KERNEL);
+	if (!dev)
+		return ERR_PTR(-ENOMEM);
+
+	dev->minor = opts->minor;
+	dev->pnp_string = opts->pnp_string;
+	dev->q_len = opts->q_len;
+
+	dev->function.name = "printer";
+	dev->function.bind = printer_func_bind;
+	dev->function.setup = printer_func_setup;
+	dev->function.unbind = printer_func_unbind;
+	dev->function.set_alt = printer_func_set_alt;
+	dev->function.disable = printer_func_disable;
+	dev->function.req_match = gprinter_req_match;
+	dev->function.free_func = gprinter_free;
+
+	INIT_LIST_HEAD(&dev->tx_reqs);
+	INIT_LIST_HEAD(&dev->rx_reqs);
+	INIT_LIST_HEAD(&dev->rx_buffers);
+	INIT_LIST_HEAD(&dev->tx_reqs_active);
+	INIT_LIST_HEAD(&dev->rx_reqs_active);
+
+	spin_lock_init(&dev->lock);
+	mutex_init(&dev->lock_printer_io);
+	init_waitqueue_head(&dev->rx_wait);
+	init_waitqueue_head(&dev->tx_wait);
+	init_waitqueue_head(&dev->tx_flush_wait);
+
+	dev->interface = -1;
+	dev->printer_cdev_open = 0;
+	dev->printer_status = PRINTER_NOT_ERROR;
+	dev->current_rx_req = NULL;
+	dev->current_rx_bytes = 0;
+	dev->current_rx_buf = NULL;
+
+	return &dev->function;
+}
+
+DECLARE_USB_FUNCTION_INIT(printer, gprinter_alloc_inst, gprinter_alloc);
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Craig Nadler");
+
+#endif
 
 static int gprinter_setup(int count)
 {
diff --git a/drivers/usb/gadget/function/u_printer.h b/drivers/usb/gadget/function/u_printer.h
new file mode 100644
index 000000000000..b2338cacdfe4
--- /dev/null
+++ b/drivers/usb/gadget/function/u_printer.h
@@ -0,0 +1,30 @@
+/*
+ * u_printer.h
+ *
+ * Utility definitions for the printer function
+ *
+ * Copyright (c) 2015 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * Author: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef U_PRINTER_H
+#define U_PRINTER_H
+
+#include <linux/usb/composite.h>
+
+#define PNP_STRING_LEN			1024
+
+struct f_printer_opts {
+	struct usb_function_instance	func_inst;
+	int				minor;
+	char				pnp_string[PNP_STRING_LEN];
+	unsigned			q_len;
+};
+
+#endif /* U_PRINTER_H */
diff --git a/drivers/usb/gadget/legacy/printer.c b/drivers/usb/gadget/legacy/printer.c
index 4d926d08df02..770b5041323e 100644
--- a/drivers/usb/gadget/legacy/printer.c
+++ b/drivers/usb/gadget/legacy/printer.c
@@ -33,6 +33,7 @@ static const char driver_desc [] = DRIVER_DESC;
  * This will be changed when f_printer is converted
  * to the new function interface.
  */
+#define USBF_PRINTER_INCLUDED
 #include "f_printer.c"
 
 /*-------------------------------------------------------------------------*/
-- 
cgit v1.2.3-59-g8ed1b


From 69504f808d6770940f1404b6f6f43c50cfe0be72 Mon Sep 17 00:00:00 2001
From: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
Date: Tue, 3 Mar 2015 10:52:29 +0100
Subject: usb: gadget: printer: convert to new interface of f_printer

The goal is to remove the old function interface, so its (only) user
must be converted to the new interface.

Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
---
 drivers/usb/gadget/legacy/Kconfig   |  1 +
 drivers/usb/gadget/legacy/printer.c | 50 ++++++++++++++++++++++++++-----------
 2 files changed, 37 insertions(+), 14 deletions(-)

(limited to 'drivers/usb')

diff --git a/drivers/usb/gadget/legacy/Kconfig b/drivers/usb/gadget/legacy/Kconfig
index 113c87e22117..d5a7102de696 100644
--- a/drivers/usb/gadget/legacy/Kconfig
+++ b/drivers/usb/gadget/legacy/Kconfig
@@ -301,6 +301,7 @@ config USB_MIDI_GADGET
 config USB_G_PRINTER
 	tristate "Printer Gadget"
 	select USB_LIBCOMPOSITE
+	select USB_F_PRINTER
 	help
 	  The Printer Gadget channels data between the USB host and a
 	  userspace program driving the print engine. The user space
diff --git a/drivers/usb/gadget/legacy/printer.c b/drivers/usb/gadget/legacy/printer.c
index 770b5041323e..a8050f8cbe11 100644
--- a/drivers/usb/gadget/legacy/printer.c
+++ b/drivers/usb/gadget/legacy/printer.c
@@ -29,12 +29,7 @@ USB_GADGET_COMPOSITE_OPTIONS();
 static const char shortname [] = "printer";
 static const char driver_desc [] = DRIVER_DESC;
 
-/*
- * This will be changed when f_printer is converted
- * to the new function interface.
- */
-#define USBF_PRINTER_INCLUDED
-#include "f_printer.c"
+#include "u_printer.h"
 
 /*-------------------------------------------------------------------------*/
 
@@ -65,6 +60,9 @@ module_param(qlen, uint, S_IRUGO|S_IWUSR);
 
 #define QLEN	qlen
 
+static struct usb_function_instance *fi_printer;
+static struct usb_function *f_printer;
+
 /*-------------------------------------------------------------------------*/
 
 /*
@@ -131,6 +129,7 @@ static struct usb_configuration printer_cfg_driver = {
 static int __init printer_do_config(struct usb_configuration *c)
 {
 	struct usb_gadget	*gadget = c->cdev->gadget;
+	int			status = 0;
 
 	usb_ep_autoconfig_reset(gadget);
 
@@ -142,20 +141,41 @@ static int __init printer_do_config(struct usb_configuration *c)
 		printer_cfg_driver.bmAttributes |= USB_CONFIG_ATT_WAKEUP;
 	}
 
-	return f_printer_bind_config(c, iPNPstring, pnp_string, QLEN, 0);
+	f_printer = usb_get_function(fi_printer);
+	if (IS_ERR(f_printer))
+		return PTR_ERR(f_printer);
+
+	status = usb_add_function(c, f_printer);
+	if (status < 0)
+		usb_put_function(f_printer);
+
+	return status;
 }
 
 static int __init printer_bind(struct usb_composite_dev *cdev)
 {
-	int ret;
+	struct f_printer_opts *opts;
+	int ret, len;
 
-	ret = gprinter_setup(PRINTER_MINORS);
-	if (ret)
-		return ret;
+	fi_printer = usb_get_function_instance("printer");
+	if (IS_ERR(fi_printer))
+		return PTR_ERR(fi_printer);
+
+	if (iPNPstring)
+		strlcpy(&pnp_string[2], iPNPstring, PNP_STRING_LEN - 2);
+
+	len = strlen(pnp_string);
+	pnp_string[0] = (len >> 8) & 0xFF;
+	pnp_string[1] = len & 0xFF;
+
+	opts = container_of(fi_printer, struct f_printer_opts, func_inst);
+	opts->minor = 0;
+	memcpy(opts->pnp_string, pnp_string, PNP_STRING_LEN);
+	opts->q_len = QLEN;
 
 	ret = usb_string_ids_tab(cdev, strings);
 	if (ret < 0) {
-		gprinter_cleanup();
+		usb_put_function_instance(fi_printer);
 		return ret;
 	}
 	device_desc.iManufacturer = strings[USB_GADGET_MANUFACTURER_IDX].id;
@@ -164,7 +184,7 @@ static int __init printer_bind(struct usb_composite_dev *cdev)
 
 	ret = usb_add_config(cdev, &printer_cfg_driver, printer_do_config);
 	if (ret) {
-		gprinter_cleanup();
+		usb_put_function_instance(fi_printer);
 		return ret;
 	}
 	usb_composite_overwrite_options(cdev, &coverwrite);
@@ -173,7 +193,9 @@ static int __init printer_bind(struct usb_composite_dev *cdev)
 
 static int __exit printer_unbind(struct usb_composite_dev *cdev)
 {
-	gprinter_cleanup();
+	usb_put_function(f_printer);
+	usb_put_function_instance(fi_printer);
+
 	return 0;
 }
 
-- 
cgit v1.2.3-59-g8ed1b


From d85dc4824c5793f4b71225d7ba5b50e737045830 Mon Sep 17 00:00:00 2001
From: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
Date: Tue, 3 Mar 2015 10:52:30 +0100
Subject: usb: gadget: f_printer: remove compatibility layer

There are no old interface users left, so it can be removed.

Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
---
 drivers/usb/gadget/function/f_printer.c | 113 --------------------------------
 1 file changed, 113 deletions(-)

(limited to 'drivers/usb')

diff --git a/drivers/usb/gadget/function/f_printer.c b/drivers/usb/gadget/function/f_printer.c
index 93f4d4e61fef..7afe17d76f17 100644
--- a/drivers/usb/gadget/function/f_printer.c
+++ b/drivers/usb/gadget/function/f_printer.c
@@ -57,10 +57,8 @@
 
 static int major, minors;
 static struct class *usb_gadget_class;
-#ifndef USBF_PRINTER_INCLUDED
 static DEFINE_IDA(printer_ida);
 static DEFINE_MUTEX(printer_ida_lock); /* protects access do printer_ida */
-#endif
 
 /*-------------------------------------------------------------------------*/
 
@@ -1118,53 +1116,6 @@ fail_tx_reqs:
 
 }
 
-#ifdef USBF_PRINTER_INCLUDED
-static void printer_func_unbind(struct usb_configuration *c,
-		struct usb_function *f)
-{
-	struct printer_dev	*dev;
-	struct usb_request	*req;
-
-	dev = func_to_printer(f);
-
-	device_destroy(usb_gadget_class, MKDEV(major, dev->minor));
-
-	/* Remove Character Device */
-	cdev_del(&dev->printer_cdev);
-
-	/* we must already have been disconnected ... no i/o may be active */
-	WARN_ON(!list_empty(&dev->tx_reqs_active));
-	WARN_ON(!list_empty(&dev->rx_reqs_active));
-
-	/* Free all memory for this driver. */
-	while (!list_empty(&dev->tx_reqs)) {
-		req = container_of(dev->tx_reqs.next, struct usb_request,
-				list);
-		list_del(&req->list);
-		printer_req_free(dev->in_ep, req);
-	}
-
-	if (dev->current_rx_req != NULL)
-		printer_req_free(dev->out_ep, dev->current_rx_req);
-
-	while (!list_empty(&dev->rx_reqs)) {
-		req = container_of(dev->rx_reqs.next,
-				struct usb_request, list);
-		list_del(&req->list);
-		printer_req_free(dev->out_ep, req);
-	}
-
-	while (!list_empty(&dev->rx_buffers)) {
-		req = container_of(dev->rx_buffers.next,
-				struct usb_request, list);
-		list_del(&req->list);
-		printer_req_free(dev->out_ep, req);
-	}
-	usb_free_all_descriptors(f);
-	kfree(dev);
-}
-#endif
-
 static int printer_func_set_alt(struct usb_function *f,
 		unsigned intf, unsigned alt)
 {
@@ -1189,68 +1140,6 @@ static void printer_func_disable(struct usb_function *f)
 	spin_unlock_irqrestore(&dev->lock, flags);
 }
 
-#ifdef USBF_PRINTER_INCLUDED
-static int f_printer_bind_config(struct usb_configuration *c, char *pnp_str,
-				 char *pnp_string, unsigned q_len, int minor)
-{
-	struct printer_dev	*dev;
-	int			status = -ENOMEM;
-	size_t			len;
-
-	if (minor >= minors)
-		return -ENOENT;
-
-	dev = kzalloc(sizeof(*dev), GFP_KERNEL);
-	if (!dev)
-		return -ENOMEM;
-
-	dev->pnp_string = pnp_string;
-	dev->minor = minor;
-
-	dev->function.name = shortname;
-	dev->function.bind = printer_func_bind;
-	dev->function.setup = printer_func_setup;
-	dev->function.unbind = printer_func_unbind;
-	dev->function.set_alt = printer_func_set_alt;
-	dev->function.disable = printer_func_disable;
-	dev->function.req_match = gprinter_req_match;
-	INIT_LIST_HEAD(&dev->tx_reqs);
-	INIT_LIST_HEAD(&dev->rx_reqs);
-	INIT_LIST_HEAD(&dev->rx_buffers);
-
-	if (pnp_str)
-		strlcpy(&dev->pnp_string[2], pnp_str, PNP_STRING_LEN - 2);
-
-	len = strlen(pnp_string);
-	pnp_string[0] = (len >> 8) & 0xFF;
-	pnp_string[1] = len & 0xFF;
-
-	spin_lock_init(&dev->lock);
-	mutex_init(&dev->lock_printer_io);
-	INIT_LIST_HEAD(&dev->tx_reqs_active);
-	INIT_LIST_HEAD(&dev->rx_reqs_active);
-	init_waitqueue_head(&dev->rx_wait);
-	init_waitqueue_head(&dev->tx_wait);
-	init_waitqueue_head(&dev->tx_flush_wait);
-
-	dev->interface = -1;
-	dev->printer_cdev_open = 0;
-	dev->printer_status = PRINTER_NOT_ERROR;
-	dev->current_rx_req = NULL;
-	dev->current_rx_bytes = 0;
-	dev->current_rx_buf = NULL;
-	dev->q_len = q_len;
-
-	status = usb_add_function(c, &dev->function);
-	if (status) {
-		kfree(dev);
-		return status;
-	}
-
-	INFO(dev, "%s, version: " DRIVER_VERSION "\n", driver_desc);
-	return 0;
-}
-#else
 static inline int gprinter_get_minor(void)
 {
 	return ida_simple_get(&printer_ida, 0, 0, GFP_KERNEL);
@@ -1422,8 +1311,6 @@ DECLARE_USB_FUNCTION_INIT(printer, gprinter_alloc_inst, gprinter_alloc);
 MODULE_LICENSE("GPL");
 MODULE_AUTHOR("Craig Nadler");
 
-#endif
-
 static int gprinter_setup(int count)
 {
 	int status;
-- 
cgit v1.2.3-59-g8ed1b


From a2a8e48a94c78c72b5dd1e4c8d190c5c54aca7a4 Mon Sep 17 00:00:00 2001
From: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
Date: Tue, 3 Mar 2015 10:52:31 +0100
Subject: usb: gadget: printer: use module_usb_composite_driver helper macro

Substitute some boilerplate code with a dedicated macro.

Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
---
 drivers/usb/gadget/legacy/printer.c | 14 +-------------
 1 file changed, 1 insertion(+), 13 deletions(-)

(limited to 'drivers/usb')

diff --git a/drivers/usb/gadget/legacy/printer.c b/drivers/usb/gadget/legacy/printer.c
index a8050f8cbe11..d5b6ee725a2a 100644
--- a/drivers/usb/gadget/legacy/printer.c
+++ b/drivers/usb/gadget/legacy/printer.c
@@ -208,19 +208,7 @@ static __refdata struct usb_composite_driver printer_driver = {
 	.unbind		= printer_unbind,
 };
 
-static int __init
-init(void)
-{
-	return usb_composite_probe(&printer_driver);
-}
-module_init(init);
-
-static void __exit
-cleanup(void)
-{
-	usb_composite_unregister(&printer_driver);
-}
-module_exit(cleanup);
+module_usb_composite_driver(printer_driver);
 
 MODULE_DESCRIPTION(DRIVER_DESC);
 MODULE_AUTHOR("Craig Nadler");
-- 
cgit v1.2.3-59-g8ed1b


From ee1cd515e889d222f5a7397fead0a9db1214edea Mon Sep 17 00:00:00 2001
From: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
Date: Tue, 3 Mar 2015 10:52:32 +0100
Subject: usb: gadget: printer: add configfs support

Add support for configfs interface so that f_printer can be used as a
component of usb gadgets composed with it.

Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
---
 .../ABI/testing/configfs-usb-gadget-printer        |   9 ++
 Documentation/usb/gadget-testing.txt               |  47 ++++++++
 drivers/usb/gadget/Kconfig                         |  13 +++
 drivers/usb/gadget/function/f_printer.c            | 130 ++++++++++++++++++++-
 drivers/usb/gadget/function/u_printer.h            |   7 ++
 5 files changed, 204 insertions(+), 2 deletions(-)
 create mode 100644 Documentation/ABI/testing/configfs-usb-gadget-printer

(limited to 'drivers/usb')

diff --git a/Documentation/ABI/testing/configfs-usb-gadget-printer b/Documentation/ABI/testing/configfs-usb-gadget-printer
new file mode 100644
index 000000000000..6b0714e3c605
--- /dev/null
+++ b/Documentation/ABI/testing/configfs-usb-gadget-printer
@@ -0,0 +1,9 @@
+What:		/config/usb-gadget/gadget/functions/printer.name
+Date:		Apr 2015
+KernelVersion:	4.1
+Description:
+		The attributes:
+
+		pnp_string	- Data to be passed to the host in pnp string
+		q_len		- Number of requests per endpoint
+
diff --git a/Documentation/usb/gadget-testing.txt b/Documentation/usb/gadget-testing.txt
index 076ac7ba7f93..f45b2bf4b41d 100644
--- a/Documentation/usb/gadget-testing.txt
+++ b/Documentation/usb/gadget-testing.txt
@@ -19,6 +19,7 @@ provided by gadgets.
 16. UAC1 function
 17. UAC2 function
 18. UVC function
+19. PRINTER function
 
 
 1. ACM function
@@ -726,3 +727,49 @@ with these patches:
 http://www.spinics.net/lists/linux-usb/msg99220.html
 
 host: luvcview -f yuv
+
+19. PRINTER function
+====================
+
+The function is provided by usb_f_printer.ko module.
+
+Function-specific configfs interface
+------------------------------------
+
+The function name to use when creating the function directory is "printer".
+The printer function provides these attributes in its function directory:
+
+	pnp_string	- Data to be passed to the host in pnp string
+	q_len		- Number of requests per endpoint
+
+Testing the PRINTER function
+----------------------------
+
+The most basic testing:
+
+device: run the gadget
+# ls -l /devices/virtual/usb_printer_gadget/
+
+should show g_printer<number>.
+
+If udev is active, then /dev/g_printer<number> should appear automatically.
+
+host:
+
+If udev is active, then e.g. /dev/usb/lp0 should appear.
+
+host->device transmission:
+
+device:
+# cat /dev/g_printer<number>
+host:
+# cat > /dev/usb/lp0
+
+device->host transmission:
+
+# cat > /dev/g_printer<number>
+host:
+# cat /dev/usb/lp0
+
+More advanced testing can be done with the prn_example
+described in Documentation/usb/gadget-printer.txt.
diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig
index 9d507cf98f94..3bb0e67fded2 100644
--- a/drivers/usb/gadget/Kconfig
+++ b/drivers/usb/gadget/Kconfig
@@ -437,6 +437,19 @@ config USB_CONFIGFS_F_UVC
 	  device. It provides a userspace API to process UVC control requests
 	  and stream video data to the host.
 
+config USB_CONFIGFS_F_PRINTER
+	bool "Printer function"
+	select USB_F_PRINTER
+	help
+	  The Printer function channels data between the USB host and a
+	  userspace program driving the print engine. The user space
+	  program reads and writes the device file /dev/g_printer<X> to
+	  receive or send printer data. It can use ioctl calls to
+	  the device file to get or set printer status.
+
+	  For more information, see Documentation/usb/gadget_printer.txt
+	  which includes sample code for accessing the device file.
+
 source "drivers/usb/gadget/legacy/Kconfig"
 
 endchoice
diff --git a/drivers/usb/gadget/function/f_printer.c b/drivers/usb/gadget/function/f_printer.c
index 7afe17d76f17..757fcf070013 100644
--- a/drivers/usb/gadget/function/f_printer.c
+++ b/drivers/usb/gadget/function/f_printer.c
@@ -1140,6 +1140,117 @@ static void printer_func_disable(struct usb_function *f)
 	spin_unlock_irqrestore(&dev->lock, flags);
 }
 
+static inline struct f_printer_opts
+*to_f_printer_opts(struct config_item *item)
+{
+	return container_of(to_config_group(item), struct f_printer_opts,
+			    func_inst.group);
+}
+
+CONFIGFS_ATTR_STRUCT(f_printer_opts);
+CONFIGFS_ATTR_OPS(f_printer_opts);
+
+static void printer_attr_release(struct config_item *item)
+{
+	struct f_printer_opts *opts = to_f_printer_opts(item);
+
+	usb_put_function_instance(&opts->func_inst);
+}
+
+static struct configfs_item_operations printer_item_ops = {
+	.release	= printer_attr_release,
+	.show_attribute	= f_printer_opts_attr_show,
+	.store_attribute = f_printer_opts_attr_store,
+};
+
+static ssize_t f_printer_opts_pnp_string_show(struct f_printer_opts *opts,
+					      char *page)
+{
+	int result;
+
+	mutex_lock(&opts->lock);
+	result = strlcpy(page, opts->pnp_string + 2, PNP_STRING_LEN - 2);
+	mutex_unlock(&opts->lock);
+
+	return result;
+}
+
+static ssize_t f_printer_opts_pnp_string_store(struct f_printer_opts *opts,
+					       const char *page, size_t len)
+{
+	int result, l;
+
+	mutex_lock(&opts->lock);
+	result = strlcpy(opts->pnp_string + 2, page, PNP_STRING_LEN - 2);
+	l = strlen(opts->pnp_string + 2) + 2;
+	opts->pnp_string[0] = (l >> 8) & 0xFF;
+	opts->pnp_string[1] = l & 0xFF;
+	mutex_unlock(&opts->lock);
+
+	return result;
+}
+
+static struct f_printer_opts_attribute f_printer_opts_pnp_string =
+	__CONFIGFS_ATTR(pnp_string, S_IRUGO | S_IWUSR,
+			f_printer_opts_pnp_string_show,
+			f_printer_opts_pnp_string_store);
+
+static ssize_t f_printer_opts_q_len_show(struct f_printer_opts *opts,
+					 char *page)
+{
+	int result;
+
+	mutex_lock(&opts->lock);
+	result = sprintf(page, "%d\n", opts->q_len);
+	mutex_unlock(&opts->lock);
+
+	return result;
+}
+
+static ssize_t f_printer_opts_q_len_store(struct f_printer_opts *opts,
+					  const char *page, size_t len)
+{
+	int ret;
+	u16 num;
+
+	mutex_lock(&opts->lock);
+	if (opts->refcnt) {
+		ret = -EBUSY;
+		goto end;
+	}
+
+	ret = kstrtou16(page, 0, &num);
+	if (ret)
+		goto end;
+
+	if (num > 65535) {
+		ret = -EINVAL;
+		goto end;
+	}
+
+	opts->q_len = (unsigned)num;
+	ret = len;
+end:
+	mutex_unlock(&opts->lock);
+	return ret;
+}
+
+static struct f_printer_opts_attribute f_printer_opts_q_len =
+	__CONFIGFS_ATTR(q_len, S_IRUGO | S_IWUSR, f_printer_opts_q_len_show,
+			f_printer_opts_q_len_store);
+
+static struct configfs_attribute *printer_attrs[] = {
+	&f_printer_opts_pnp_string.attr,
+	&f_printer_opts_q_len.attr,
+	NULL,
+};
+
+static struct config_item_type printer_func_type = {
+	.ct_item_ops	= &printer_item_ops,
+	.ct_attrs	= printer_attrs,
+	.ct_owner	= THIS_MODULE,
+};
+
 static inline int gprinter_get_minor(void)
 {
 	return ida_simple_get(&printer_ida, 0, 0, GFP_KERNEL);
@@ -1180,6 +1291,7 @@ static struct usb_function_instance *gprinter_alloc_inst(void)
 	if (!opts)
 		return ERR_PTR(-ENOMEM);
 
+	mutex_init(&opts->lock);
 	opts->func_inst.free_func_inst = gprinter_free_inst;
 	ret = &opts->func_inst;
 
@@ -1201,6 +1313,8 @@ static struct usb_function_instance *gprinter_alloc_inst(void)
 		if (idr_is_empty(&printer_ida.idr))
 			gprinter_cleanup();
 	}
+	config_group_init_type_name(&opts->func_inst.group, "",
+				    &printer_func_type);
 
 unlock:
 	mutex_unlock(&printer_ida_lock);
@@ -1210,8 +1324,13 @@ unlock:
 static void gprinter_free(struct usb_function *f)
 {
 	struct printer_dev *dev = func_to_printer(f);
+	struct f_printer_opts *opts;
 
+	opts = container_of(f->fi, struct f_printer_opts, func_inst);
 	kfree(dev);
+	mutex_lock(&opts->lock);
+	--opts->refcnt;
+	mutex_unlock(&opts->lock);
 }
 
 static void printer_func_unbind(struct usb_configuration *c,
@@ -1265,16 +1384,23 @@ static struct usb_function *gprinter_alloc(struct usb_function_instance *fi)
 
 	opts = container_of(fi, struct f_printer_opts, func_inst);
 
-	if (opts->minor >= minors)
+	mutex_lock(&opts->lock);
+	if (opts->minor >= minors) {
+		mutex_unlock(&opts->lock);
 		return ERR_PTR(-ENOENT);
+	}
 
 	dev = kzalloc(sizeof(*dev), GFP_KERNEL);
-	if (!dev)
+	if (!dev) {
+		mutex_unlock(&opts->lock);
 		return ERR_PTR(-ENOMEM);
+	}
 
+	++opts->refcnt;
 	dev->minor = opts->minor;
 	dev->pnp_string = opts->pnp_string;
 	dev->q_len = opts->q_len;
+	mutex_unlock(&opts->lock);
 
 	dev->function.name = "printer";
 	dev->function.bind = printer_func_bind;
diff --git a/drivers/usb/gadget/function/u_printer.h b/drivers/usb/gadget/function/u_printer.h
index b2338cacdfe4..0e2c49d4274e 100644
--- a/drivers/usb/gadget/function/u_printer.h
+++ b/drivers/usb/gadget/function/u_printer.h
@@ -25,6 +25,13 @@ struct f_printer_opts {
 	int				minor;
 	char				pnp_string[PNP_STRING_LEN];
 	unsigned			q_len;
+
+	/*
+	 * Protect the data from concurrent access by read/write
+	 * and create symlink/remove symlink
+	 */
+	struct mutex			lock;
+	int				refcnt;
 };
 
 #endif /* U_PRINTER_H */
-- 
cgit v1.2.3-59-g8ed1b


From 983f3cabf6677340dd5b9aec5440b427b8c47ad9 Mon Sep 17 00:00:00 2001
From: Felipe Balbi <balbi@ti.com>
Date: Wed, 11 Mar 2015 10:18:40 -0500
Subject: usb: musb: dsps: request phy using our device pointer

musb shouldn't have of_node and phy phandle is passed
to dsps device, not musb's.

Signed-off-by: Felipe Balbi <balbi@ti.com>
---
 drivers/usb/musb/musb_dsps.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/usb')

diff --git a/drivers/usb/musb/musb_dsps.c b/drivers/usb/musb/musb_dsps.c
index baa757ba1353..a528d3be70c5 100644
--- a/drivers/usb/musb/musb_dsps.c
+++ b/drivers/usb/musb/musb_dsps.c
@@ -432,7 +432,7 @@ static int dsps_musb_init(struct musb *musb)
 	musb->ctrl_base = reg_base;
 
 	/* NOP driver needs change if supporting dual instance */
-	musb->xceiv = devm_usb_get_phy_by_phandle(dev, "phys", 0);
+	musb->xceiv = devm_usb_get_phy_by_phandle(dev->parent, "phys", 0);
 	if (IS_ERR(musb->xceiv))
 		return PTR_ERR(musb->xceiv);
 
-- 
cgit v1.2.3-59-g8ed1b


From 33c300cb90a6c0072507a949f78c4728238a81f0 Mon Sep 17 00:00:00 2001
From: Felipe Balbi <balbi@ti.com>
Date: Tue, 10 Mar 2015 10:42:12 -0500
Subject: usb: musb: dsps: don't fake of_node to musb core

If we pass our own of_node to musb_core, at least
pinctrl settings will be duplicated, meaning that
pinctrl framework will try to select default pin
state for musb_core when they were already requested
by musb-dsps.

A Warning will be printed however things will still
work.

Reported-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
---
 drivers/usb/musb/musb_dsps.c | 1 -
 1 file changed, 1 deletion(-)

(limited to 'drivers/usb')

diff --git a/drivers/usb/musb/musb_dsps.c b/drivers/usb/musb/musb_dsps.c
index a528d3be70c5..09648b4e40c2 100644
--- a/drivers/usb/musb/musb_dsps.c
+++ b/drivers/usb/musb/musb_dsps.c
@@ -697,7 +697,6 @@ static int dsps_create_musb_pdev(struct dsps_glue *glue,
 	musb->dev.parent		= dev;
 	musb->dev.dma_mask		= &musb_dmamask;
 	musb->dev.coherent_dma_mask	= musb_dmamask;
-	musb->dev.of_node		= of_node_get(dn);
 
 	glue->musb = musb;
 
-- 
cgit v1.2.3-59-g8ed1b


From 06ed0de5188c9ef6553b2824b6cdd767ad46ece5 Mon Sep 17 00:00:00 2001
From: Masanari Iida <standby24x7@gmail.com>
Date: Tue, 10 Mar 2015 22:37:46 +0900
Subject: usb: gadget: Fix typo fond in Documentation/Docbook/gadget.xml

This patch fix some spelling typo found in gadget.xml.
It is because this file is generated from comments in sources,
I had to fix comments in the source, instead of xml file itself.

Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
---
 drivers/usb/gadget/composite.c | 4 ++--
 include/linux/usb/gadget.h     | 2 +-
 2 files changed, 3 insertions(+), 3 deletions(-)

(limited to 'drivers/usb')

diff --git a/drivers/usb/gadget/composite.c b/drivers/usb/gadget/composite.c
index 4d25e11b1f72..4e3447bbd097 100644
--- a/drivers/usb/gadget/composite.c
+++ b/drivers/usb/gadget/composite.c
@@ -1161,11 +1161,11 @@ static struct usb_gadget_string_container *copy_gadget_strings(
  * This function will create a deep copy of usb_gadget_strings and usb_string
  * and attach it to the cdev. The actual string (usb_string.s) will not be
  * copied but only a referenced will be made. The struct usb_gadget_strings
- * array may contain multiple languges and should be NULL terminated.
+ * array may contain multiple languages and should be NULL terminated.
  * The ->language pointer of each struct usb_gadget_strings has to contain the
  * same amount of entries.
  * For instance: sp[0] is en-US, sp[1] is es-ES. It is expected that the first
- * usb_string entry of es-ES containts the translation of the first usb_string
+ * usb_string entry of es-ES contains the translation of the first usb_string
  * entry of en-US. Therefore both entries become the same id assign.
  */
 struct usb_string *usb_gstrings_attach(struct usb_composite_dev *cdev,
diff --git a/include/linux/usb/gadget.h b/include/linux/usb/gadget.h
index e2f00fd8cd47..02476b3a1109 100644
--- a/include/linux/usb/gadget.h
+++ b/include/linux/usb/gadget.h
@@ -190,7 +190,7 @@ struct usb_ep {
  * @ep:the endpoint being configured
  * @maxpacket_limit:value of maximum packet size limit
  *
- * This function shoud be used only in UDC drivers to initialize endpoint
+ * This function should be used only in UDC drivers to initialize endpoint
  * (usually in probe function).
  */
 static inline void usb_ep_set_maxpacket_limit(struct usb_ep *ep,
-- 
cgit v1.2.3-59-g8ed1b


From fddc26f573e28dde62013cd5d8d5c60aa85e74a4 Mon Sep 17 00:00:00 2001
From: Tal Shorer <tal.shorer@gmail.com>
Date: Fri, 6 Mar 2015 21:53:32 +0200
Subject: usb: gadget: f_mass_storage: use defined constant instead of numeric
 value

replace numeric value with TYPE_NO_LUN (defined in <scsi/scsi.h>)

Signed-off-by: Tal Shorer <tal.shorer@gmail.com>
Acked-by: Michal Nazarewicz <mina86@mina86.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
---
 drivers/usb/gadget/function/f_mass_storage.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/usb')

diff --git a/drivers/usb/gadget/function/f_mass_storage.c b/drivers/usb/gadget/function/f_mass_storage.c
index 811929cd4c9e..6d5ca2b2d052 100644
--- a/drivers/usb/gadget/function/f_mass_storage.c
+++ b/drivers/usb/gadget/function/f_mass_storage.c
@@ -1085,7 +1085,7 @@ static int do_inquiry(struct fsg_common *common, struct fsg_buffhd *bh)
 	if (!curlun) {		/* Unsupported LUNs are okay */
 		common->bad_lun_okay = 1;
 		memset(buf, 0, 36);
-		buf[0] = 0x7f;		/* Unsupported, no device-type */
+		buf[0] = TYPE_NO_LUN;	/* Unsupported, no device-type */
 		buf[4] = 31;		/* Additional length */
 		return 36;
 	}
-- 
cgit v1.2.3-59-g8ed1b


From 2b08977b8dcb18c75b4972184c9ab54937119cba Mon Sep 17 00:00:00 2001
From: Mickael Maison <mickael.maison@gmail.com>
Date: Sun, 8 Mar 2015 19:24:02 +0000
Subject: usb: phy: ab8500: fixed comment typo

Fixed a comment typo in drivers/usb/phy/phy-ab8500-usb.c

Signed-off-by: Mickael Maison <mickael.maison@gmail.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
---
 drivers/usb/phy/phy-ab8500-usb.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/usb')

diff --git a/drivers/usb/phy/phy-ab8500-usb.c b/drivers/usb/phy/phy-ab8500-usb.c
index 0b1bd2369293..59cccfadae96 100644
--- a/drivers/usb/phy/phy-ab8500-usb.c
+++ b/drivers/usb/phy/phy-ab8500-usb.c
@@ -893,7 +893,7 @@ static int abx500_usb_link_status_update(struct ab8500_usb *ab)
 
 /*
  * Disconnection Sequence:
- *   1. Disconect Interrupt
+ *   1. Disconnect Interrupt
  *   2. Disable regulators
  *   3. Disable AB clock
  *   4. Disable the Phy
-- 
cgit v1.2.3-59-g8ed1b


From 656e7c36bd70e115266cf280e0ff049506ceb16c Mon Sep 17 00:00:00 2001
From: Mickael Maison <mickael.maison@gmail.com>
Date: Sun, 8 Mar 2015 19:26:52 +0000
Subject: usb: phy: fixed comment typo

Fixed a comment typo in drivers/usb/phy/of.c

Signed-off-by: Mickael Maison <mickael.maison@gmail.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
---
 drivers/usb/phy/of.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/usb')

diff --git a/drivers/usb/phy/of.c b/drivers/usb/phy/of.c
index 7ea0154da9d5..66ffa82457a8 100644
--- a/drivers/usb/phy/of.c
+++ b/drivers/usb/phy/of.c
@@ -27,7 +27,7 @@ static const char *const usbphy_modes[] = {
  * @np:	Pointer to the given device_node
  *
  * The function gets phy interface string from property 'phy_type',
- * and returns the correspondig enum usb_phy_interface
+ * and returns the corresponding enum usb_phy_interface
  */
 enum usb_phy_interface of_usb_get_phy_mode(struct device_node *np)
 {
-- 
cgit v1.2.3-59-g8ed1b


From 227ab58cff3c26ec279598112887d6bcca677a0c Mon Sep 17 00:00:00 2001
From: Sylvain Rochet <sylvain.rochet@finsecur.com>
Date: Thu, 12 Feb 2015 18:54:04 +0100
Subject: usb: gadget: atmel_usba_udc: Fixed vbus_prev initial state

If vbus gpio is high at init, we should set vbus_prev to true
accordingly to the current vbus state. Without that, we skip the first
vbus interrupt because the saved vbus state is not consistent.

Signed-off-by: Sylvain Rochet <sylvain.rochet@finsecur.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
---
 drivers/usb/gadget/udc/atmel_usba_udc.c | 2 ++
 1 file changed, 2 insertions(+)

(limited to 'drivers/usb')

diff --git a/drivers/usb/gadget/udc/atmel_usba_udc.c b/drivers/usb/gadget/udc/atmel_usba_udc.c
index d79cb35dbf8a..e63c6fc8173b 100644
--- a/drivers/usb/gadget/udc/atmel_usba_udc.c
+++ b/drivers/usb/gadget/udc/atmel_usba_udc.c
@@ -1811,6 +1811,8 @@ static int atmel_usba_start(struct usb_gadget *gadget,
 		toggle_bias(udc, 1);
 		usba_writel(udc, CTRL, USBA_ENABLE_MASK);
 		usba_int_enb_set(udc, USBA_END_OF_RESET);
+
+		udc->vbus_prev = 1;
 	}
 	spin_unlock_irqrestore(&udc->lock, flags);
 
-- 
cgit v1.2.3-59-g8ed1b


From bb0a203c3a4e37b4bbb1f8ef55a855618dbba265 Mon Sep 17 00:00:00 2001
From: Sylvain Rochet <sylvain.rochet@finsecur.com>
Date: Thu, 12 Feb 2015 18:54:05 +0100
Subject: usb: gadget: atmel_usba_udc: Request an auto disabled Vbus signal IRQ

Vbus IRQ handler needs a started UDC driver to work because it uses
udc->driver, which is set by the UDC start handler. The previous way
chosen was to return from interrupt if udc->driver is NULL using a
spinlock around the check.

We now request an auto disabled (IRQ_NOAUTOEN) Vbus signal IRQ instead
of an auto enabled IRQ followed by disable_irq(). This way we remove the
very small timeslot of enabled IRQ which existed previously between
request() and disable(). We don't need anymore to check if udc->driver
is NULL in IRQ handler.

Signed-off-by: Sylvain Rochet <sylvain.rochet@finsecur.com>
Suggested-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
---
 drivers/usb/gadget/udc/atmel_usba_udc.c | 9 ++-------
 1 file changed, 2 insertions(+), 7 deletions(-)

(limited to 'drivers/usb')

diff --git a/drivers/usb/gadget/udc/atmel_usba_udc.c b/drivers/usb/gadget/udc/atmel_usba_udc.c
index e63c6fc8173b..bbbd5f11f767 100644
--- a/drivers/usb/gadget/udc/atmel_usba_udc.c
+++ b/drivers/usb/gadget/udc/atmel_usba_udc.c
@@ -1749,10 +1749,6 @@ static irqreturn_t usba_vbus_irq(int irq, void *devid)
 
 	spin_lock(&udc->lock);
 
-	/* May happen if Vbus pin toggles during probe() */
-	if (!udc->driver)
-		goto out;
-
 	vbus = vbus_is_present(udc);
 	if (vbus != udc->vbus_prev) {
 		if (vbus) {
@@ -1773,7 +1769,6 @@ static irqreturn_t usba_vbus_irq(int irq, void *devid)
 		udc->vbus_prev = vbus;
 	}
 
-out:
 	spin_unlock(&udc->lock);
 
 	return IRQ_HANDLED;
@@ -2113,6 +2108,8 @@ static int usba_udc_probe(struct platform_device *pdev)
 
 	if (gpio_is_valid(udc->vbus_pin)) {
 		if (!devm_gpio_request(&pdev->dev, udc->vbus_pin, "atmel_usba_udc")) {
+			irq_set_status_flags(gpio_to_irq(udc->vbus_pin),
+					IRQ_NOAUTOEN);
 			ret = devm_request_irq(&pdev->dev,
 					gpio_to_irq(udc->vbus_pin),
 					usba_vbus_irq, 0,
@@ -2122,8 +2119,6 @@ static int usba_udc_probe(struct platform_device *pdev)
 				dev_warn(&udc->pdev->dev,
 					 "failed to request vbus irq; "
 					 "assuming always on\n");
-			} else {
-				disable_irq(gpio_to_irq(udc->vbus_pin));
 			}
 		} else {
 			/* gpio_request fail so use -EINVAL for gpio_is_valid */
-- 
cgit v1.2.3-59-g8ed1b


From a64ef71ddc13fc76a6f4af8c61e0106a62004380 Mon Sep 17 00:00:00 2001
From: Sylvain Rochet <sylvain.rochet@finsecur.com>
Date: Thu, 12 Feb 2015 18:54:06 +0100
Subject: usb: gadget: atmel_usba_udc: condition clocks to vbus state

If USB PLL is not necessary for other USB drivers (e.g. OHCI and EHCI)
we will reduce power consumption by switching off the USB PLL if no USB
Host is currently connected to this USB Device.

We are using Vbus GPIO signal to detect Host presence. If Vbus signal is
not available then the device stays continuously clocked.

Signed-off-by: Sylvain Rochet <sylvain.rochet@finsecur.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
---
 drivers/usb/gadget/udc/atmel_usba_udc.c | 144 +++++++++++++++++++++-----------
 drivers/usb/gadget/udc/atmel_usba_udc.h |   4 +
 2 files changed, 100 insertions(+), 48 deletions(-)

(limited to 'drivers/usb')

diff --git a/drivers/usb/gadget/udc/atmel_usba_udc.c b/drivers/usb/gadget/udc/atmel_usba_udc.c
index bbbd5f11f767..999e2f2cd2cc 100644
--- a/drivers/usb/gadget/udc/atmel_usba_udc.c
+++ b/drivers/usb/gadget/udc/atmel_usba_udc.c
@@ -1739,7 +1739,72 @@ static irqreturn_t usba_udc_irq(int irq, void *devid)
 	return IRQ_HANDLED;
 }
 
-static irqreturn_t usba_vbus_irq(int irq, void *devid)
+static int start_clock(struct usba_udc *udc)
+{
+	int ret;
+
+	if (udc->clocked)
+		return 0;
+
+	ret = clk_prepare_enable(udc->pclk);
+	if (ret)
+		return ret;
+	ret = clk_prepare_enable(udc->hclk);
+	if (ret) {
+		clk_disable_unprepare(udc->pclk);
+		return ret;
+	}
+
+	udc->clocked = true;
+	return 0;
+}
+
+static void stop_clock(struct usba_udc *udc)
+{
+	if (!udc->clocked)
+		return;
+
+	clk_disable_unprepare(udc->hclk);
+	clk_disable_unprepare(udc->pclk);
+
+	udc->clocked = false;
+}
+
+static int usba_start(struct usba_udc *udc)
+{
+	unsigned long flags;
+	int ret;
+
+	ret = start_clock(udc);
+	if (ret)
+		return ret;
+
+	spin_lock_irqsave(&udc->lock, flags);
+	toggle_bias(udc, 1);
+	usba_writel(udc, CTRL, USBA_ENABLE_MASK);
+	usba_int_enb_set(udc, USBA_END_OF_RESET);
+	spin_unlock_irqrestore(&udc->lock, flags);
+
+	return 0;
+}
+
+static void usba_stop(struct usba_udc *udc)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&udc->lock, flags);
+	udc->gadget.speed = USB_SPEED_UNKNOWN;
+	reset_all_endpoints(udc);
+
+	/* This will also disable the DP pullup */
+	toggle_bias(udc, 0);
+	usba_writel(udc, CTRL, USBA_DISABLE_MASK);
+	spin_unlock_irqrestore(&udc->lock, flags);
+
+	stop_clock(udc);
+}
+
+static irqreturn_t usba_vbus_irq_thread(int irq, void *devid)
 {
 	struct usba_udc *udc = devid;
 	int vbus;
@@ -1747,30 +1812,22 @@ static irqreturn_t usba_vbus_irq(int irq, void *devid)
 	/* debounce */
 	udelay(10);
 
-	spin_lock(&udc->lock);
+	mutex_lock(&udc->vbus_mutex);
 
 	vbus = vbus_is_present(udc);
 	if (vbus != udc->vbus_prev) {
 		if (vbus) {
-			toggle_bias(udc, 1);
-			usba_writel(udc, CTRL, USBA_ENABLE_MASK);
-			usba_int_enb_set(udc, USBA_END_OF_RESET);
+			usba_start(udc);
 		} else {
-			udc->gadget.speed = USB_SPEED_UNKNOWN;
-			reset_all_endpoints(udc);
-			toggle_bias(udc, 0);
-			usba_writel(udc, CTRL, USBA_DISABLE_MASK);
-			if (udc->driver->disconnect) {
-				spin_unlock(&udc->lock);
+			usba_stop(udc);
+
+			if (udc->driver->disconnect)
 				udc->driver->disconnect(&udc->gadget);
-				spin_lock(&udc->lock);
-			}
 		}
 		udc->vbus_prev = vbus;
 	}
 
-	spin_unlock(&udc->lock);
-
+	mutex_unlock(&udc->vbus_mutex);
 	return IRQ_HANDLED;
 }
 
@@ -1782,57 +1839,47 @@ static int atmel_usba_start(struct usb_gadget *gadget,
 	unsigned long flags;
 
 	spin_lock_irqsave(&udc->lock, flags);
-
 	udc->devstatus = 1 << USB_DEVICE_SELF_POWERED;
 	udc->driver = driver;
 	spin_unlock_irqrestore(&udc->lock, flags);
 
-	ret = clk_prepare_enable(udc->pclk);
-	if (ret)
-		return ret;
-	ret = clk_prepare_enable(udc->hclk);
-	if (ret) {
-		clk_disable_unprepare(udc->pclk);
-		return ret;
-	}
+	mutex_lock(&udc->vbus_mutex);
 
-	udc->vbus_prev = 0;
 	if (gpio_is_valid(udc->vbus_pin))
 		enable_irq(gpio_to_irq(udc->vbus_pin));
 
 	/* If Vbus is present, enable the controller and wait for reset */
-	spin_lock_irqsave(&udc->lock, flags);
-	if (vbus_is_present(udc) && udc->vbus_prev == 0) {
-		toggle_bias(udc, 1);
-		usba_writel(udc, CTRL, USBA_ENABLE_MASK);
-		usba_int_enb_set(udc, USBA_END_OF_RESET);
-
-		udc->vbus_prev = 1;
+	udc->vbus_prev = vbus_is_present(udc);
+	if (udc->vbus_prev) {
+		ret = usba_start(udc);
+		if (ret)
+			goto err;
 	}
-	spin_unlock_irqrestore(&udc->lock, flags);
 
+	mutex_unlock(&udc->vbus_mutex);
 	return 0;
+
+err:
+	if (gpio_is_valid(udc->vbus_pin))
+		disable_irq(gpio_to_irq(udc->vbus_pin));
+
+	mutex_unlock(&udc->vbus_mutex);
+
+	spin_lock_irqsave(&udc->lock, flags);
+	udc->devstatus &= ~(1 << USB_DEVICE_SELF_POWERED);
+	udc->driver = NULL;
+	spin_unlock_irqrestore(&udc->lock, flags);
+	return ret;
 }
 
 static int atmel_usba_stop(struct usb_gadget *gadget)
 {
 	struct usba_udc *udc = container_of(gadget, struct usba_udc, gadget);
-	unsigned long flags;
 
 	if (gpio_is_valid(udc->vbus_pin))
 		disable_irq(gpio_to_irq(udc->vbus_pin));
 
-	spin_lock_irqsave(&udc->lock, flags);
-	udc->gadget.speed = USB_SPEED_UNKNOWN;
-	reset_all_endpoints(udc);
-	spin_unlock_irqrestore(&udc->lock, flags);
-
-	/* This will also disable the DP pullup */
-	toggle_bias(udc, 0);
-	usba_writel(udc, CTRL, USBA_DISABLE_MASK);
-
-	clk_disable_unprepare(udc->hclk);
-	clk_disable_unprepare(udc->pclk);
+	usba_stop(udc);
 
 	udc->driver = NULL;
 
@@ -2054,6 +2101,7 @@ static int usba_udc_probe(struct platform_device *pdev)
 		return PTR_ERR(hclk);
 
 	spin_lock_init(&udc->lock);
+	mutex_init(&udc->vbus_mutex);
 	udc->pdev = pdev;
 	udc->pclk = pclk;
 	udc->hclk = hclk;
@@ -2110,9 +2158,9 @@ static int usba_udc_probe(struct platform_device *pdev)
 		if (!devm_gpio_request(&pdev->dev, udc->vbus_pin, "atmel_usba_udc")) {
 			irq_set_status_flags(gpio_to_irq(udc->vbus_pin),
 					IRQ_NOAUTOEN);
-			ret = devm_request_irq(&pdev->dev,
-					gpio_to_irq(udc->vbus_pin),
-					usba_vbus_irq, 0,
+			ret = devm_request_threaded_irq(&pdev->dev,
+					gpio_to_irq(udc->vbus_pin), NULL,
+					usba_vbus_irq_thread, IRQF_ONESHOT,
 					"atmel_usba_udc", udc);
 			if (ret) {
 				udc->vbus_pin = -ENODEV;
diff --git a/drivers/usb/gadget/udc/atmel_usba_udc.h b/drivers/usb/gadget/udc/atmel_usba_udc.h
index 497cd18836f3..085749a649e1 100644
--- a/drivers/usb/gadget/udc/atmel_usba_udc.h
+++ b/drivers/usb/gadget/udc/atmel_usba_udc.h
@@ -313,6 +313,9 @@ struct usba_udc {
 	/* Protect hw registers from concurrent modifications */
 	spinlock_t lock;
 
+	/* Mutex to prevent concurrent start or stop */
+	struct mutex vbus_mutex;
+
 	void __iomem *regs;
 	void __iomem *fifo;
 
@@ -328,6 +331,7 @@ struct usba_udc {
 	struct clk *hclk;
 	struct usba_ep *usba_ep;
 	bool bias_pulse_needed;
+	bool clocked;
 
 	u16 devstatus;
 
-- 
cgit v1.2.3-59-g8ed1b


From 112bf24471b50f806cbcbead7bd485da70401b83 Mon Sep 17 00:00:00 2001
From: Sylvain Rochet <sylvain.rochet@finsecur.com>
Date: Thu, 12 Feb 2015 18:54:07 +0100
Subject: usb: gadget: atmel_usba_udc: Add suspend/resume with wakeup support

This patch add suspend/resume with wakeup support for Atmel USBA.

On suspend: We stay continuously clocked if Vbus signal is not
available. If Vbus signal is available we set the Vbus signal as a wake
up source then we stop the USBA itself and all clocks used by USBA.

On resume: We recover clocks and USBA if we stopped them. If a device is
currently connected at resume time we enable the controller.

Signed-off-by: Sylvain Rochet <sylvain.rochet@finsecur.com>
Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
---
 drivers/usb/gadget/udc/atmel_usba_udc.c | 57 +++++++++++++++++++++++++++++++++
 1 file changed, 57 insertions(+)

(limited to 'drivers/usb')

diff --git a/drivers/usb/gadget/udc/atmel_usba_udc.c b/drivers/usb/gadget/udc/atmel_usba_udc.c
index 999e2f2cd2cc..d019b6c9d74d 100644
--- a/drivers/usb/gadget/udc/atmel_usba_udc.c
+++ b/drivers/usb/gadget/udc/atmel_usba_udc.c
@@ -2177,6 +2177,7 @@ static int usba_udc_probe(struct platform_device *pdev)
 	ret = usb_add_gadget_udc(&pdev->dev, &udc->gadget);
 	if (ret)
 		return ret;
+	device_init_wakeup(&pdev->dev, 1);
 
 	usba_init_debugfs(udc);
 	for (i = 1; i < udc->num_ep; i++)
@@ -2192,6 +2193,7 @@ static int __exit usba_udc_remove(struct platform_device *pdev)
 
 	udc = platform_get_drvdata(pdev);
 
+	device_init_wakeup(&pdev->dev, 0);
 	usb_del_gadget_udc(&udc->gadget);
 
 	for (i = 1; i < udc->num_ep; i++)
@@ -2201,10 +2203,65 @@ static int __exit usba_udc_remove(struct platform_device *pdev)
 	return 0;
 }
 
+#ifdef CONFIG_PM
+static int usba_udc_suspend(struct device *dev)
+{
+	struct usba_udc *udc = dev_get_drvdata(dev);
+
+	/* Not started */
+	if (!udc->driver)
+		return 0;
+
+	mutex_lock(&udc->vbus_mutex);
+
+	if (!device_may_wakeup(dev)) {
+		usba_stop(udc);
+		goto out;
+	}
+
+	/*
+	 * Device may wake up. We stay clocked if we failed
+	 * to request vbus irq, assuming always on.
+	 */
+	if (gpio_is_valid(udc->vbus_pin)) {
+		usba_stop(udc);
+		enable_irq_wake(gpio_to_irq(udc->vbus_pin));
+	}
+
+out:
+	mutex_unlock(&udc->vbus_mutex);
+	return 0;
+}
+
+static int usba_udc_resume(struct device *dev)
+{
+	struct usba_udc *udc = dev_get_drvdata(dev);
+
+	/* Not started */
+	if (!udc->driver)
+		return 0;
+
+	if (device_may_wakeup(dev) && gpio_is_valid(udc->vbus_pin))
+		disable_irq_wake(gpio_to_irq(udc->vbus_pin));
+
+	/* If Vbus is present, enable the controller and wait for reset */
+	mutex_lock(&udc->vbus_mutex);
+	udc->vbus_prev = vbus_is_present(udc);
+	if (udc->vbus_prev)
+		usba_start(udc);
+	mutex_unlock(&udc->vbus_mutex);
+
+	return 0;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(usba_udc_pm_ops, usba_udc_suspend, usba_udc_resume);
+
 static struct platform_driver udc_driver = {
 	.remove		= __exit_p(usba_udc_remove),
 	.driver		= {
 		.name		= "atmel_usba_udc",
+		.pm		= &usba_udc_pm_ops,
 		.of_match_table	= of_match_ptr(atmel_udc_dt_ids),
 	},
 };
-- 
cgit v1.2.3-59-g8ed1b


From fa84acf0f6142e7f35da785e25ee978518ff21ac Mon Sep 17 00:00:00 2001
From: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Date: Fri, 6 Feb 2015 00:42:00 +0100
Subject: usb: gadget: dummy-hcd: Remove utf8 from format string

Not everybody uses a utf8 locale (unfortunately), so let's avoid
non-ascii characters in the kernel log. Replace the 3-byte utf8
sequence with a 3-byte ascii equivalent.

Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Felipe Balbi <balbi@ti.com>
---
 drivers/usb/gadget/udc/dummy_hcd.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/usb')

diff --git a/drivers/usb/gadget/udc/dummy_hcd.c b/drivers/usb/gadget/udc/dummy_hcd.c
index 8dda48445f6f..7592db7824c6 100644
--- a/drivers/usb/gadget/udc/dummy_hcd.c
+++ b/drivers/usb/gadget/udc/dummy_hcd.c
@@ -2631,7 +2631,7 @@ static int __init init(void)
 		return -EINVAL;
 
 	if (mod_data.num < 1 || mod_data.num > MAX_NUM_UDC) {
-		pr_err("Number of emulated UDC must be in range of 1…%d\n",
+		pr_err("Number of emulated UDC must be in range of 1...%d\n",
 				MAX_NUM_UDC);
 		return -EINVAL;
 	}
-- 
cgit v1.2.3-59-g8ed1b


From f4e4f8dae3753685e577143e8116cbac52f13cc4 Mon Sep 17 00:00:00 2001
From: Robert Baldyga <r.baldyga@samsung.com>
Date: Tue, 10 Feb 2015 17:30:36 +0100
Subject: usb: gadget: f_hid: remove unnecessary usb_ep_dequeue()

Function usb_ep_disable() causes completion of all requests queued
for given endpoint, so there is no need to dequeue them after endpoint
disabling.

Signed-off-by: Robert Baldyga <r.baldyga@samsung.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
---
 drivers/usb/gadget/function/f_hid.c | 1 -
 1 file changed, 1 deletion(-)

(limited to 'drivers/usb')

diff --git a/drivers/usb/gadget/function/f_hid.c b/drivers/usb/gadget/function/f_hid.c
index a2612fb79eff..13dfc9915b1d 100644
--- a/drivers/usb/gadget/function/f_hid.c
+++ b/drivers/usb/gadget/function/f_hid.c
@@ -908,7 +908,6 @@ static void hidg_unbind(struct usb_configuration *c, struct usb_function *f)
 
 	/* disable/free request and end point */
 	usb_ep_disable(hidg->in_ep);
-	usb_ep_dequeue(hidg->in_ep, hidg->req);
 	kfree(hidg->req->buf);
 	usb_ep_free_request(hidg->in_ep, hidg->req);
 
-- 
cgit v1.2.3-59-g8ed1b


From 168bdb88c3ab1f66c061a6220c18939ef20ba42e Mon Sep 17 00:00:00 2001
From: Fabio Estevam <fabio.estevam@freescale.com>
Date: Tue, 3 Feb 2015 19:18:17 -0200
Subject: usb: phy: phy-generic: No need to call gpiod_direction_output() twice

Commit 9eb0797722895f4309b4 ("usb: phy: generic: fix the gpios to be optional")
calls gpiod_direction_output() in the probe function, so there is no need to
call it again, as we can simply call gpiod_set_value() directly.

Also, in usb_gen_phy_shutdown() we can simply put the GPIO directly in its
active level state and this allows us to simplify the nop_reset function to
treat only the reset case.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
---
 drivers/usb/phy/phy-generic.c | 12 +++++-------
 1 file changed, 5 insertions(+), 7 deletions(-)

(limited to 'drivers/usb')

diff --git a/drivers/usb/phy/phy-generic.c b/drivers/usb/phy/phy-generic.c
index 70be50b734b2..deee68eafb72 100644
--- a/drivers/usb/phy/phy-generic.c
+++ b/drivers/usb/phy/phy-generic.c
@@ -62,14 +62,14 @@ static int nop_set_suspend(struct usb_phy *x, int suspend)
 	return 0;
 }
 
-static void nop_reset_set(struct usb_phy_generic *nop, int asserted)
+static void nop_reset(struct usb_phy_generic *nop)
 {
 	if (!nop->gpiod_reset)
 		return;
 
-	gpiod_direction_output(nop->gpiod_reset, !asserted);
+	gpiod_set_value(nop->gpiod_reset, 1);
 	usleep_range(10000, 20000);
-	gpiod_set_value(nop->gpiod_reset, asserted);
+	gpiod_set_value(nop->gpiod_reset, 0);
 }
 
 /* interface to regulator framework */
@@ -151,8 +151,7 @@ int usb_gen_phy_init(struct usb_phy *phy)
 	if (!IS_ERR(nop->clk))
 		clk_prepare_enable(nop->clk);
 
-	/* De-assert RESET */
-	nop_reset_set(nop, 0);
+	nop_reset(nop);
 
 	return 0;
 }
@@ -162,8 +161,7 @@ void usb_gen_phy_shutdown(struct usb_phy *phy)
 {
 	struct usb_phy_generic *nop = dev_get_drvdata(phy->dev);
 
-	/* Assert RESET */
-	nop_reset_set(nop, 1);
+	gpiod_set_value(nop->gpiod_reset, 1);
 
 	if (!IS_ERR(nop->clk))
 		clk_disable_unprepare(nop->clk);
-- 
cgit v1.2.3-59-g8ed1b


From 72a472d2f912292457d6e3579df342c1138f26d5 Mon Sep 17 00:00:00 2001
From: Takeyoshi Kikuchi <kikuchi@centurysys.co.jp>
Date: Mon, 2 Mar 2015 11:03:51 +0900
Subject: usb: musb: cppi41: fix condition to call cppi41_trans_done().

connect AR9271(USB wifi) to AM335x, and send a flood ping from Mac OSX,
AR9271 is stopped.

on USB bus, the following occurs.

 - OUT transaction is ACKed (NYET).
 - IN transaction is ACKed (512bytes).
 - PING-NAK transaction is continued for about 2 seconds (AR9271 timeout?).

In current imprementation, IN-transaction is not completed because it
checks the empty of TX-FIFO in cppi41_dma_callback().
As a result, communication to AR9271 stops.

This patch modified to check the empty of TX-FIFO only when OUT-transaction.

Signed-off-by: Takeyoshi Kikuchi <kikuchi@centurysys.co.jp>
Signed-off-by: Felipe Balbi <balbi@ti.com>
---
 drivers/usb/musb/musb_cppi41.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

(limited to 'drivers/usb')

diff --git a/drivers/usb/musb/musb_cppi41.c b/drivers/usb/musb/musb_cppi41.c
index 9dc45a4a9fa8..8bd8c5e26921 100644
--- a/drivers/usb/musb/musb_cppi41.c
+++ b/drivers/usb/musb/musb_cppi41.c
@@ -250,8 +250,10 @@ static void cppi41_dma_callback(void *private_data)
 			transferred < cppi41_channel->packet_sz)
 		cppi41_channel->prog_len = 0;
 
-	empty = musb_is_tx_fifo_empty(hw_ep);
-	if (empty) {
+	if (cppi41_channel->is_tx)
+		empty = musb_is_tx_fifo_empty(hw_ep);
+
+	if (!cppi41_channel->is_tx || empty) {
 		cppi41_trans_done(cppi41_channel);
 		goto out;
 	}
-- 
cgit v1.2.3-59-g8ed1b


From 005a64307d5d3ef895e7821df4cad7739bab392e Mon Sep 17 00:00:00 2001
From: Peter Chen <peter.chen@freescale.com>
Date: Wed, 11 Mar 2015 10:07:47 +0800
Subject: usb: gadget: lpc32xxx_udc: Fix NULL dereference

udc is then checked for NULL, if NULL, it is then dereferenced as
udc->dev, it is found using Coccinelle.

We simplify the code to fix this problem, and we delete some conditions
at if {} which will never be met.

Reported-by: Tapasweni Pathak <tapaswenipathak@gmail.com>
Reported-by : Julia Lawall <julia.lawall@lip6.fr>
Signed-off-by: Peter Chen <peter.chen@freescale.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
---
 drivers/usb/gadget/udc/lpc32xx_udc.c | 15 +++------------
 1 file changed, 3 insertions(+), 12 deletions(-)

(limited to 'drivers/usb')

diff --git a/drivers/usb/gadget/udc/lpc32xx_udc.c b/drivers/usb/gadget/udc/lpc32xx_udc.c
index 27fd41333f71..3b6a7852822d 100644
--- a/drivers/usb/gadget/udc/lpc32xx_udc.c
+++ b/drivers/usb/gadget/udc/lpc32xx_udc.c
@@ -1803,23 +1803,14 @@ static int lpc32xx_ep_queue(struct usb_ep *_ep,
 	req = container_of(_req, struct lpc32xx_request, req);
 	ep = container_of(_ep, struct lpc32xx_ep, ep);
 
-	if (!_req || !_req->complete || !_req->buf ||
+	if (!_ep || !_req || !_req->complete || !_req->buf ||
 	    !list_empty(&req->queue))
 		return -EINVAL;
 
 	udc = ep->udc;
 
-	if (!_ep) {
-		dev_dbg(udc->dev, "invalid ep\n");
-		return -EINVAL;
-	}
-
-
-	if ((!udc) || (!udc->driver) ||
-	    (udc->gadget.speed == USB_SPEED_UNKNOWN)) {
-		dev_dbg(udc->dev, "invalid device\n");
-		return -EINVAL;
-	}
+	if (udc->gadget.speed == USB_SPEED_UNKNOWN)
+		return -EPIPE;
 
 	if (ep->lep) {
 		struct lpc32xx_usbd_dd_gad *dd;
-- 
cgit v1.2.3-59-g8ed1b


From 9024c495f35be735a917571406fab30a789c27d1 Mon Sep 17 00:00:00 2001
From: John Youn <John.Youn@synopsys.com>
Date: Tue, 3 Mar 2015 17:17:49 -0800
Subject: usb: dwc2: pci: Add device mode to the dwc2-pci driver

The pci driver now registers a platform driver, like in dwc3, and lets
its probe function do all the initialization. This allows it to
account for changes to the platform driver that were not added to the
pci driver. Also future changes to the probe function don't have to be
duplicated. This also has the effect of adding device and DRD mode to
the pci driver. Tested on the Synopsys HAPS PCIe platform.

Signed-off-by: John Youn <johnyoun@synopsys.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
---
 drivers/usb/dwc2/Kconfig |   7 ++-
 drivers/usb/dwc2/pci.c   | 159 +++++++++++++++++++++--------------------------
 2 files changed, 76 insertions(+), 90 deletions(-)

(limited to 'drivers/usb')

diff --git a/drivers/usb/dwc2/Kconfig b/drivers/usb/dwc2/Kconfig
index 76b9ba4dc925..3db204f21ff9 100644
--- a/drivers/usb/dwc2/Kconfig
+++ b/drivers/usb/dwc2/Kconfig
@@ -59,11 +59,12 @@ config USB_DWC2_PLATFORM
 
 config USB_DWC2_PCI
 	tristate "DWC2 PCI"
-	depends on USB_DWC2_HOST && PCI
-	default USB_DWC2_HOST
+	depends on PCI
+	default n
+	select USB_DWC2_PLATFORM
 	help
 	  The Designware USB2.0 PCI interface module for controllers
-	  connected to a PCI bus. This is only used for host mode.
+	  connected to a PCI bus.
 
 config USB_DWC2_DEBUG
 	bool "Enable Debugging Messages"
diff --git a/drivers/usb/dwc2/pci.c b/drivers/usb/dwc2/pci.c
index 6646adb1fb17..ae419615a176 100644
--- a/drivers/usb/dwc2/pci.c
+++ b/drivers/usb/dwc2/pci.c
@@ -50,112 +50,97 @@
 
 #include <linux/usb/hcd.h>
 #include <linux/usb/ch11.h>
-
-#include "core.h"
-#include "hcd.h"
+#include <linux/platform_device.h>
+#include <linux/usb/usb_phy_generic.h>
 
 #define PCI_PRODUCT_ID_HAPS_HSOTG	0xabc0
 
-static const char dwc2_driver_name[] = "dwc2";
-
-static const struct dwc2_core_params dwc2_module_params = {
-	.otg_cap			= -1,
-	.otg_ver			= -1,
-	.dma_enable			= -1,
-	.dma_desc_enable		= 0,
-	.speed				= -1,
-	.enable_dynamic_fifo		= -1,
-	.en_multiple_tx_fifo		= -1,
-	.host_rx_fifo_size		= 1024,
-	.host_nperio_tx_fifo_size	= 256,
-	.host_perio_tx_fifo_size	= 1024,
-	.max_transfer_size		= 65535,
-	.max_packet_count		= 511,
-	.host_channels			= -1,
-	.phy_type			= -1,
-	.phy_utmi_width			= -1,
-	.phy_ulpi_ddr			= -1,
-	.phy_ulpi_ext_vbus		= -1,
-	.i2c_enable			= -1,
-	.ulpi_fs_ls			= -1,
-	.host_support_fs_ls_low_power	= -1,
-	.host_ls_low_power_phy_clk	= -1,
-	.ts_dline			= -1,
-	.reload_ctl			= -1,
-	.ahbcfg				= -1,
-	.uframe_sched			= -1,
+static const char dwc2_driver_name[] = "dwc2-pci";
+
+struct dwc2_pci_glue {
+	struct platform_device *dwc2;
+	struct platform_device *phy;
 };
 
-/**
- * dwc2_driver_remove() - Called when the DWC_otg core is unregistered with the
- * DWC_otg driver
- *
- * @dev: Bus device
- *
- * This routine is called, for example, when the rmmod command is executed. The
- * device may or may not be electrically present. If it is present, the driver
- * stops device processing. Any resources used on behalf of this device are
- * freed.
- */
-static void dwc2_driver_remove(struct pci_dev *dev)
+static void dwc2_pci_remove(struct pci_dev *pci)
 {
-	struct dwc2_hsotg *hsotg = pci_get_drvdata(dev);
+	struct dwc2_pci_glue *glue = pci_get_drvdata(pci);
 
-	dwc2_hcd_remove(hsotg);
-	pci_disable_device(dev);
+	platform_device_unregister(glue->dwc2);
+	usb_phy_generic_unregister(glue->phy);
+	kfree(glue);
+	pci_set_drvdata(pci, NULL);
 }
 
-/**
- * dwc2_driver_probe() - Called when the DWC_otg core is bound to the DWC_otg
- * driver
- *
- * @dev: Bus device
- *
- * This routine creates the driver components required to control the device
- * (core, HCD, and PCD) and initializes the device. The driver components are
- * stored in a dwc2_hsotg structure. A reference to the dwc2_hsotg is saved
- * in the device private data. This allows the driver to access the dwc2_hsotg
- * structure on subsequent calls to driver methods for this device.
- */
-static int dwc2_driver_probe(struct pci_dev *dev,
-			     const struct pci_device_id *id)
+static int dwc2_pci_probe(struct pci_dev *pci,
+		const struct pci_device_id *id)
 {
-	struct dwc2_hsotg *hsotg;
-	int retval;
+	struct resource		res[2];
+	struct platform_device	*dwc2;
+	struct platform_device	*phy;
+	int			ret;
+	struct device		*dev = &pci->dev;
+	struct dwc2_pci_glue	*glue;
+
+	ret = pcim_enable_device(pci);
+	if (ret) {
+		dev_err(dev, "failed to enable pci device\n");
+		return -ENODEV;
+	}
+
+	pci_set_master(pci);
 
-	hsotg = devm_kzalloc(&dev->dev, sizeof(*hsotg), GFP_KERNEL);
-	if (!hsotg)
+	dwc2 = platform_device_alloc("dwc2", PLATFORM_DEVID_AUTO);
+	if (!dwc2) {
+		dev_err(dev, "couldn't allocate dwc2 device\n");
 		return -ENOMEM;
+	}
 
-	hsotg->dev = &dev->dev;
-	hsotg->regs = devm_ioremap_resource(&dev->dev, &dev->resource[0]);
-	if (IS_ERR(hsotg->regs))
-		return PTR_ERR(hsotg->regs);
+	memset(res, 0x00, sizeof(struct resource) * ARRAY_SIZE(res));
 
-	dev_dbg(&dev->dev, "mapped PA %08lx to VA %p\n",
-		(unsigned long)pci_resource_start(dev, 0), hsotg->regs);
+	res[0].start	= pci_resource_start(pci, 0);
+	res[0].end	= pci_resource_end(pci, 0);
+	res[0].name	= "dwc2";
+	res[0].flags	= IORESOURCE_MEM;
 
-	if (pci_enable_device(dev) < 0)
-		return -ENODEV;
+	res[1].start	= pci->irq;
+	res[1].name	= "dwc2";
+	res[1].flags	= IORESOURCE_IRQ;
 
-	pci_set_master(dev);
+	ret = platform_device_add_resources(dwc2, res, ARRAY_SIZE(res));
+	if (ret) {
+		dev_err(dev, "couldn't add resources to dwc2 device\n");
+		return ret;
+	}
 
-	retval = devm_request_irq(hsotg->dev, dev->irq,
-				  dwc2_handle_common_intr, IRQF_SHARED,
-				  dev_name(hsotg->dev), hsotg);
-	if (retval)
-		return retval;
+	dwc2->dev.parent = dev;
 
-	spin_lock_init(&hsotg->lock);
-	retval = dwc2_hcd_init(hsotg, dev->irq, &dwc2_module_params);
-	if (retval) {
-		pci_disable_device(dev);
-		return retval;
+	phy = usb_phy_generic_register();
+	if (IS_ERR(phy)) {
+		dev_err(dev, "error registering generic PHY (%ld)\n",
+			PTR_ERR(phy));
+		return PTR_ERR(phy);
 	}
 
-	pci_set_drvdata(dev, hsotg);
+	ret = platform_device_add(dwc2);
+	if (ret) {
+		dev_err(dev, "failed to register dwc2 device\n");
+		goto err;
+	}
+
+	glue = kzalloc(sizeof(*glue), GFP_KERNEL);
+	if (!glue)
+		return -ENOMEM;
+
+	glue->phy = phy;
+	glue->dwc2 = dwc2;
+	pci_set_drvdata(pci, glue);
 
-	return retval;
+	return 0;
+err:
+	usb_phy_generic_unregister(phy);
+	platform_device_put(dwc2);
+	return ret;
 }
 
 static const struct pci_device_id dwc2_pci_ids[] = {
@@ -173,8 +158,8 @@ MODULE_DEVICE_TABLE(pci, dwc2_pci_ids);
 static struct pci_driver dwc2_pci_driver = {
 	.name = dwc2_driver_name,
 	.id_table = dwc2_pci_ids,
-	.probe = dwc2_driver_probe,
-	.remove = dwc2_driver_remove,
+	.probe = dwc2_pci_probe,
+	.remove = dwc2_pci_remove,
 };
 
 module_pci_driver(dwc2_pci_driver);
-- 
cgit v1.2.3-59-g8ed1b


From e39af88f18dfe9a7938765c97ce9ed448915e6d5 Mon Sep 17 00:00:00 2001
From: Marek Szyprowski <m.szyprowski@samsung.com>
Date: Tue, 10 Mar 2015 13:41:10 +0100
Subject: usb: dwc2: rework initialization of host and gadget in dual-role mode

If device is configured to work only in HOST or DEVICE mode, there is
no point in initializing both subdrivers. This patch also fixes
resource leakage if host subdriver fails to initialize.

Acked-by: John Youn <johnyoun@synopsys.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
---
 drivers/usb/dwc2/core.h     |  2 ++
 drivers/usb/dwc2/platform.c | 29 +++++++++++++++++++++--------
 2 files changed, 23 insertions(+), 8 deletions(-)

(limited to 'drivers/usb')

diff --git a/drivers/usb/dwc2/core.h b/drivers/usb/dwc2/core.h
index f74304b12652..836c012c7707 100644
--- a/drivers/usb/dwc2/core.h
+++ b/drivers/usb/dwc2/core.h
@@ -593,6 +593,8 @@ struct dwc2_hsotg {
 	struct dwc2_core_params *core_params;
 	enum usb_otg_state op_state;
 	enum usb_dr_mode dr_mode;
+	unsigned int hcd_enabled:1;
+	unsigned int gadget_enabled:1;
 
 	struct phy *phy;
 	struct usb_phy *uphy;
diff --git a/drivers/usb/dwc2/platform.c b/drivers/usb/dwc2/platform.c
index ae095f009b4f..185663e0b5f4 100644
--- a/drivers/usb/dwc2/platform.c
+++ b/drivers/usb/dwc2/platform.c
@@ -121,8 +121,10 @@ static int dwc2_driver_remove(struct platform_device *dev)
 {
 	struct dwc2_hsotg *hsotg = platform_get_drvdata(dev);
 
-	dwc2_hcd_remove(hsotg);
-	s3c_hsotg_remove(hsotg);
+	if (hsotg->hcd_enabled)
+		dwc2_hcd_remove(hsotg);
+	if (hsotg->gadget_enabled)
+		s3c_hsotg_remove(hsotg);
 
 	return 0;
 }
@@ -234,12 +236,23 @@ static int dwc2_driver_probe(struct platform_device *dev)
 
 	spin_lock_init(&hsotg->lock);
 	mutex_init(&hsotg->init_mutex);
-	retval = dwc2_gadget_init(hsotg, irq);
-	if (retval)
-		return retval;
-	retval = dwc2_hcd_init(hsotg, irq, params);
-	if (retval)
-		return retval;
+
+	if (hsotg->dr_mode != USB_DR_MODE_HOST) {
+		retval = dwc2_gadget_init(hsotg, irq);
+		if (retval)
+			return retval;
+		hsotg->gadget_enabled = 1;
+	}
+
+	if (hsotg->dr_mode != USB_DR_MODE_PERIPHERAL) {
+		retval = dwc2_hcd_init(hsotg, irq, params);
+		if (retval) {
+			if (hsotg->gadget_enabled)
+				s3c_hsotg_remove(hsotg);
+			return retval;
+		}
+		hsotg->hcd_enabled = 1;
+	}
 
 	platform_set_drvdata(dev, hsotg);
 
-- 
cgit v1.2.3-59-g8ed1b


From 16d9efa4b3db0ab69605ff4d03d707d0210f4bf7 Mon Sep 17 00:00:00 2001
From: Scott Wood <scottwood@freescale.com>
Date: Thu, 12 Mar 2015 16:46:01 -0500
Subject: usb: gadget: serial: %pf is only for function pointers

Use %ps for actual addresses, otherwise you'll get bad output
on arches like ppc64 where %pf expects a function descriptor
(which is not what __builtin_return_address returns).

Reviewed-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Scott Wood <scottwood@freescale.com>
Cc: linux-usb@vger.kernel.org
CC: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
---
 drivers/usb/gadget/function/u_serial.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/usb')

diff --git a/drivers/usb/gadget/function/u_serial.c b/drivers/usb/gadget/function/u_serial.c
index 491082aaf103..89179ab20c10 100644
--- a/drivers/usb/gadget/function/u_serial.c
+++ b/drivers/usb/gadget/function/u_serial.c
@@ -912,7 +912,7 @@ static int gs_put_char(struct tty_struct *tty, unsigned char ch)
 	unsigned long	flags;
 	int		status;
 
-	pr_vdebug("gs_put_char: (%d,%p) char=0x%x, called from %pf\n",
+	pr_vdebug("gs_put_char: (%d,%p) char=0x%x, called from %ps\n",
 		port->port_num, tty, ch, __builtin_return_address(0));
 
 	spin_lock_irqsave(&port->port_lock, flags);
-- 
cgit v1.2.3-59-g8ed1b


From d4ae02cc904d916ea6b292e61b79fd3497054067 Mon Sep 17 00:00:00 2001
From: John Youn <John.Youn@synopsys.com>
Date: Thu, 12 Mar 2015 10:04:42 -0700
Subject: usb: dwc2: pci: Select the generic PHY for dwc2-pci driver

The dwc2-pci driver requires the generic PHY. This fixes undefined
reference issues when it is not selected.

Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: John Youn <johnyoun@synopsys.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
---
 drivers/usb/dwc2/Kconfig | 1 +
 1 file changed, 1 insertion(+)

(limited to 'drivers/usb')

diff --git a/drivers/usb/dwc2/Kconfig b/drivers/usb/dwc2/Kconfig
index 3db204f21ff9..1bcb36ae6505 100644
--- a/drivers/usb/dwc2/Kconfig
+++ b/drivers/usb/dwc2/Kconfig
@@ -62,6 +62,7 @@ config USB_DWC2_PCI
 	depends on PCI
 	default n
 	select USB_DWC2_PLATFORM
+	select NOP_USB_XCEIV
 	help
 	  The Designware USB2.0 PCI interface module for controllers
 	  connected to a PCI bus.
-- 
cgit v1.2.3-59-g8ed1b


From fdb51e3d97552413c851bf8426ef69508389df88 Mon Sep 17 00:00:00 2001
From: Dan Carpenter <dan.carpenter@oracle.com>
Date: Fri, 13 Mar 2015 12:11:06 +0300
Subject: usb: gadget: printer: delete some dead code

"num" is a u16 so it can't go higher than 65535.  kstrtou16() has a
range check built in so this is already handled.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
---
 drivers/usb/gadget/function/f_printer.c | 5 -----
 1 file changed, 5 deletions(-)

(limited to 'drivers/usb')

diff --git a/drivers/usb/gadget/function/f_printer.c b/drivers/usb/gadget/function/f_printer.c
index 757fcf070013..caa56de3a3e8 100644
--- a/drivers/usb/gadget/function/f_printer.c
+++ b/drivers/usb/gadget/function/f_printer.c
@@ -1223,11 +1223,6 @@ static ssize_t f_printer_opts_q_len_store(struct f_printer_opts *opts,
 	if (ret)
 		goto end;
 
-	if (num > 65535) {
-		ret = -EINVAL;
-		goto end;
-	}
-
 	opts->q_len = (unsigned)num;
 	ret = len;
 end:
-- 
cgit v1.2.3-59-g8ed1b


From 2bb2077ee607703771c35ed74837180760f9ce07 Mon Sep 17 00:00:00 2001
From: Dan Carpenter <dan.carpenter@oracle.com>
Date: Fri, 13 Mar 2015 12:11:42 +0300
Subject: usb: gadget: printer: use after free in gprinter_alloc_inst()

There was a missing goto so we free "opts" and then dereference it.

Fixes: ee1cd515e889 ('usb: gadget: printer: add configfs support')
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
---
 drivers/usb/gadget/function/f_printer.c | 1 +
 1 file changed, 1 insertion(+)

(limited to 'drivers/usb')

diff --git a/drivers/usb/gadget/function/f_printer.c b/drivers/usb/gadget/function/f_printer.c
index caa56de3a3e8..48882ecf1610 100644
--- a/drivers/usb/gadget/function/f_printer.c
+++ b/drivers/usb/gadget/function/f_printer.c
@@ -1307,6 +1307,7 @@ static struct usb_function_instance *gprinter_alloc_inst(void)
 		kfree(opts);
 		if (idr_is_empty(&printer_ida.idr))
 			gprinter_cleanup();
+		goto unlock;
 	}
 	config_group_init_type_name(&opts->func_inst.group, "",
 				    &printer_func_type);
-- 
cgit v1.2.3-59-g8ed1b


From fbdecad99c3f37346ed868fec0c3a9c2809f78e9 Mon Sep 17 00:00:00 2001
From: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
Date: Fri, 13 Mar 2015 11:08:08 +0100
Subject: usb: gadget: f_printer: use non-zero flag for bitwise and

USB_DIR_OUT happens to be zero, so the result of bitwise and is always 0.
Consequently, break will never happen in the SOFT_RESET case.
This patch uses a compatible condition with a non-zero USB_DIR_IN,
which might or might not evaluate to zero.

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
---
 drivers/usb/gadget/function/f_printer.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/usb')

diff --git a/drivers/usb/gadget/function/f_printer.c b/drivers/usb/gadget/function/f_printer.c
index 48882ecf1610..44173df27273 100644
--- a/drivers/usb/gadget/function/f_printer.c
+++ b/drivers/usb/gadget/function/f_printer.c
@@ -918,7 +918,7 @@ static bool gprinter_req_match(struct usb_function *f,
 		return false;
 	case SOFT_RESET:
 		if (!w_value && !w_length &&
-		   (USB_DIR_OUT & ctrl->bRequestType))
+		   !(USB_DIR_IN & ctrl->bRequestType))
 			break;
 		/* fall through */
 	default:
-- 
cgit v1.2.3-59-g8ed1b


From 7a96b78464bd8ba72c1c3095c543c1402db59e35 Mon Sep 17 00:00:00 2001
From: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Date: Thu, 12 Mar 2015 15:35:18 +0900
Subject: usb: renesas_usbhs: add the channel number in dma-names

To connect the channel of USB-DMAC to USBHS DnFIFO number, this patch
adds this channel/FIFO number in dma-names. Otherwise, this driver
needs to add analysis code for device tree.

Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
---
 .../devicetree/bindings/usb/renesas_usbhs.txt        |  5 ++++-
 drivers/usb/renesas_usbhs/fifo.c                     | 20 +++++++++++++-------
 2 files changed, 17 insertions(+), 8 deletions(-)

(limited to 'drivers/usb')

diff --git a/Documentation/devicetree/bindings/usb/renesas_usbhs.txt b/Documentation/devicetree/bindings/usb/renesas_usbhs.txt
index 61b045b6d50e..dc2a18f0b3a1 100644
--- a/Documentation/devicetree/bindings/usb/renesas_usbhs.txt
+++ b/Documentation/devicetree/bindings/usb/renesas_usbhs.txt
@@ -15,7 +15,10 @@ Optional properties:
   - phys: phandle + phy specifier pair
   - phy-names: must be "usb"
   - dmas: Must contain a list of references to DMA specifiers.
-  - dma-names : Must contain a list of DMA names, "tx" or "rx".
+  - dma-names : Must contain a list of DMA names:
+   - tx0 ... tx<n>
+   - rx0 ... rx<n>
+    - This <n> means DnFIFO in USBHS module.
 
 Example:
 	usbhs: usb@e6590000 {
diff --git a/drivers/usb/renesas_usbhs/fifo.c b/drivers/usb/renesas_usbhs/fifo.c
index d891bff39d66..28d10eb432d5 100644
--- a/drivers/usb/renesas_usbhs/fifo.c
+++ b/drivers/usb/renesas_usbhs/fifo.c
@@ -1069,23 +1069,29 @@ static void usbhsf_dma_init_pdev(struct usbhs_fifo *fifo)
 					    &fifo->rx_slave);
 }
 
-static void usbhsf_dma_init_dt(struct device *dev, struct usbhs_fifo *fifo)
+static void usbhsf_dma_init_dt(struct device *dev, struct usbhs_fifo *fifo,
+			       int channel)
 {
-	fifo->tx_chan = dma_request_slave_channel_reason(dev, "tx");
+	char name[16];
+
+	snprintf(name, sizeof(name), "tx%d", channel);
+	fifo->tx_chan = dma_request_slave_channel_reason(dev, name);
 	if (IS_ERR(fifo->tx_chan))
 		fifo->tx_chan = NULL;
-	fifo->rx_chan = dma_request_slave_channel_reason(dev, "rx");
+
+	snprintf(name, sizeof(name), "rx%d", channel);
+	fifo->rx_chan = dma_request_slave_channel_reason(dev, name);
 	if (IS_ERR(fifo->rx_chan))
 		fifo->rx_chan = NULL;
 }
 
-static void usbhsf_dma_init(struct usbhs_priv *priv,
-			    struct usbhs_fifo *fifo)
+static void usbhsf_dma_init(struct usbhs_priv *priv, struct usbhs_fifo *fifo,
+			    int channel)
 {
 	struct device *dev = usbhs_priv_to_dev(priv);
 
 	if (dev->of_node)
-		usbhsf_dma_init_dt(dev, fifo);
+		usbhsf_dma_init_dt(dev, fifo, channel);
 	else
 		usbhsf_dma_init_pdev(fifo);
 
@@ -1231,7 +1237,7 @@ do {									\
 			usbhs_get_dparam(priv, d##channel##_tx_id);	\
 	fifo->rx_slave.shdma_slave.slave_id =				\
 			usbhs_get_dparam(priv, d##channel##_rx_id);	\
-	usbhsf_dma_init(priv, fifo);					\
+	usbhsf_dma_init(priv, fifo, channel);				\
 } while (0)
 
 #define USBHS_DFIFO_INIT(priv, fifo, channel)				\
-- 
cgit v1.2.3-59-g8ed1b


From 9b53d9af7aac09cf249d72bfbf15f08e47c4f7fe Mon Sep 17 00:00:00 2001
From: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Date: Thu, 12 Mar 2015 15:35:19 +0900
Subject: usb: renesas_usbhs: fix the sequence in xfer_work()

This patch fixes the setup sequence in xfer_work(). Otherwise,
sometimes a usb transaction will get stuck.

Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
---
 drivers/usb/renesas_usbhs/fifo.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'drivers/usb')

diff --git a/drivers/usb/renesas_usbhs/fifo.c b/drivers/usb/renesas_usbhs/fifo.c
index 28d10eb432d5..b737661b10a2 100644
--- a/drivers/usb/renesas_usbhs/fifo.c
+++ b/drivers/usb/renesas_usbhs/fifo.c
@@ -822,10 +822,10 @@ static void xfer_work(struct work_struct *work)
 		fifo->name, usbhs_pipe_number(pipe), pkt->length, pkt->zero);
 
 	usbhs_pipe_running(pipe, 1);
-	usbhs_pipe_set_trans_count_if_bulk(pipe, pkt->trans);
-	usbhs_pipe_enable(pipe);
 	usbhsf_dma_start(pipe, fifo);
+	usbhs_pipe_set_trans_count_if_bulk(pipe, pkt->trans);
 	dma_async_issue_pending(chan);
+	usbhs_pipe_enable(pipe);
 }
 
 /*
-- 
cgit v1.2.3-59-g8ed1b


From ab330cf3888d8e0779fa05a243d53ba9f53a7ba9 Mon Sep 17 00:00:00 2001
From: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Date: Thu, 12 Mar 2015 15:35:20 +0900
Subject: usb: renesas_usbhs: add support for USB-DMAC

Some Renesas SoCs have the USB-DMAC. It is able to terminate transfers
when a short packet is received, even if less bytes than the transfer
counter size have been received. Also, it is able to send a short
packet even if the packet size is not multiples of 8bytes.

Since the previous code has used the interruption of USBHS controller
when receiving packets even if this driver has used a dmac, a lot of
interruptions has happened. This patch will reduce such interruptions.

This patch allows to use the USB-DMAC on R-Car H2 and M2.

Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
---
 drivers/usb/renesas_usbhs/common.c |  19 +++++
 drivers/usb/renesas_usbhs/common.h |   7 ++
 drivers/usb/renesas_usbhs/fifo.c   | 165 +++++++++++++++++++++++++++++++++++--
 drivers/usb/renesas_usbhs/fifo.h   |   1 +
 drivers/usb/renesas_usbhs/pipe.c   |  39 +++++++++
 drivers/usb/renesas_usbhs/pipe.h   |   1 +
 include/linux/usb/renesas_usbhs.h  |   2 +
 7 files changed, 228 insertions(+), 6 deletions(-)

(limited to 'drivers/usb')

diff --git a/drivers/usb/renesas_usbhs/common.c b/drivers/usb/renesas_usbhs/common.c
index 4cf77d3c3bd2..0f7e850fd4aa 100644
--- a/drivers/usb/renesas_usbhs/common.c
+++ b/drivers/usb/renesas_usbhs/common.c
@@ -275,6 +275,16 @@ int usbhs_set_device_config(struct usbhs_priv *priv, int devnum,
 	return 0;
 }
 
+/*
+ *		interrupt functions
+ */
+void usbhs_xxxsts_clear(struct usbhs_priv *priv, u16 sts_reg, u16 bit)
+{
+	u16 pipe_mask = (u16)GENMASK(usbhs_get_dparam(priv, pipe_size), 0);
+
+	usbhs_write(priv, sts_reg, ~(1 << bit) & pipe_mask);
+}
+
 /*
  *		local functions
  */
@@ -487,6 +497,15 @@ static struct renesas_usbhs_platform_info *usbhs_parse_dt(struct device *dev)
 	if (gpio > 0)
 		dparam->enable_gpio = gpio;
 
+	switch (dparam->type) {
+	case USBHS_TYPE_R8A7790:
+	case USBHS_TYPE_R8A7791:
+		dparam->has_usb_dmac = 1;
+		break;
+	default:
+		break;
+	}
+
 	return info;
 }
 
diff --git a/drivers/usb/renesas_usbhs/common.h b/drivers/usb/renesas_usbhs/common.h
index fc96e924edc4..8c5fc12ad778 100644
--- a/drivers/usb/renesas_usbhs/common.h
+++ b/drivers/usb/renesas_usbhs/common.h
@@ -193,6 +193,7 @@ struct usbhs_priv;
 #define TYPE_BULK	(1 << 14)
 #define TYPE_INT	(2 << 14)
 #define TYPE_ISO	(3 << 14)
+#define BFRE		(1 << 10)	/* BRDY Interrupt Operation Spec. */
 #define DBLB		(1 << 9)	/* Double Buffer Mode */
 #define SHTNAK		(1 << 7)	/* Pipe Disable in Transfer End */
 #define DIR_OUT		(1 << 4)	/* Transfer Direction */
@@ -216,6 +217,7 @@ struct usbhs_priv;
 #define	ACLRM		(1 << 9)	/* Buffer Auto-Clear Mode */
 #define SQCLR		(1 << 8)	/* Toggle Bit Clear */
 #define SQSET		(1 << 7)	/* Toggle Bit Set */
+#define SQMON		(1 << 6)	/* Toggle Bit Check */
 #define PBUSY		(1 << 5)	/* Pipe Busy */
 #define PID_MASK	(0x3)		/* Response PID */
 #define  PID_NAK	0
@@ -323,6 +325,11 @@ int usbhs_frame_get_num(struct usbhs_priv *priv);
 int usbhs_set_device_config(struct usbhs_priv *priv, int devnum, u16 upphub,
 			   u16 hubport, u16 speed);
 
+/*
+ * interrupt functions
+ */
+void usbhs_xxxsts_clear(struct usbhs_priv *priv, u16 sts_reg, u16 bit);
+
 /*
  * data
  */
diff --git a/drivers/usb/renesas_usbhs/fifo.c b/drivers/usb/renesas_usbhs/fifo.c
index b737661b10a2..8597cf9cfceb 100644
--- a/drivers/usb/renesas_usbhs/fifo.c
+++ b/drivers/usb/renesas_usbhs/fifo.c
@@ -813,7 +813,8 @@ static void xfer_work(struct work_struct *work)
 	desc->callback		= usbhsf_dma_complete;
 	desc->callback_param	= pipe;
 
-	if (dmaengine_submit(desc) < 0) {
+	pkt->cookie = dmaengine_submit(desc);
+	if (pkt->cookie < 0) {
 		dev_err(dev, "Failed to submit dma descriptor\n");
 		return;
 	}
@@ -838,6 +839,7 @@ static int usbhsf_dma_prepare_push(struct usbhs_pkt *pkt, int *is_done)
 	struct usbhs_fifo *fifo;
 	int len = pkt->length - pkt->actual;
 	int ret;
+	uintptr_t align_mask;
 
 	if (usbhs_pipe_is_busy(pipe))
 		return 0;
@@ -847,10 +849,14 @@ static int usbhsf_dma_prepare_push(struct usbhs_pkt *pkt, int *is_done)
 	    usbhs_pipe_is_dcp(pipe))
 		goto usbhsf_pio_prepare_push;
 
-	if (len & 0x7) /* 8byte alignment */
+	/* check data length if this driver don't use USB-DMAC */
+	if (!usbhs_get_dparam(priv, has_usb_dmac) && len & 0x7)
 		goto usbhsf_pio_prepare_push;
 
-	if ((uintptr_t)(pkt->buf + pkt->actual) & 0x7) /* 8byte alignment */
+	/* check buffer alignment */
+	align_mask = usbhs_get_dparam(priv, has_usb_dmac) ?
+					USBHS_USB_DMAC_XFER_SIZE - 1 : 0x7;
+	if ((uintptr_t)(pkt->buf + pkt->actual) & align_mask)
 		goto usbhsf_pio_prepare_push;
 
 	/* return at this time if the pipe is running */
@@ -924,7 +930,85 @@ struct usbhs_pkt_handle usbhs_fifo_dma_push_handler = {
 /*
  *		DMA pop handler
  */
-static int usbhsf_dma_try_pop(struct usbhs_pkt *pkt, int *is_done)
+
+static int usbhsf_dma_prepare_pop_with_rx_irq(struct usbhs_pkt *pkt,
+					      int *is_done)
+{
+	return usbhsf_prepare_pop(pkt, is_done);
+}
+
+static int usbhsf_dma_prepare_pop_with_usb_dmac(struct usbhs_pkt *pkt,
+						int *is_done)
+{
+	struct usbhs_pipe *pipe = pkt->pipe;
+	struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe);
+	struct usbhs_fifo *fifo;
+	int ret;
+
+	if (usbhs_pipe_is_busy(pipe))
+		return 0;
+
+	/* use PIO if packet is less than pio_dma_border or pipe is DCP */
+	if ((pkt->length < usbhs_get_dparam(priv, pio_dma_border)) ||
+	    usbhs_pipe_is_dcp(pipe))
+		goto usbhsf_pio_prepare_pop;
+
+	fifo = usbhsf_get_dma_fifo(priv, pkt);
+	if (!fifo)
+		goto usbhsf_pio_prepare_pop;
+
+	if ((uintptr_t)pkt->buf & (USBHS_USB_DMAC_XFER_SIZE - 1))
+		goto usbhsf_pio_prepare_pop;
+
+	usbhs_pipe_config_change_bfre(pipe, 1);
+
+	ret = usbhsf_fifo_select(pipe, fifo, 0);
+	if (ret < 0)
+		goto usbhsf_pio_prepare_pop;
+
+	if (usbhsf_dma_map(pkt) < 0)
+		goto usbhsf_pio_prepare_pop_unselect;
+
+	/* DMA */
+
+	/*
+	 * usbhs_fifo_dma_pop_handler :: prepare
+	 * enabled irq to come here.
+	 * but it is no longer needed for DMA. disable it.
+	 */
+	usbhsf_rx_irq_ctrl(pipe, 0);
+
+	pkt->trans = pkt->length;
+
+	INIT_WORK(&pkt->work, xfer_work);
+	schedule_work(&pkt->work);
+
+	return 0;
+
+usbhsf_pio_prepare_pop_unselect:
+	usbhsf_fifo_unselect(pipe, fifo);
+usbhsf_pio_prepare_pop:
+
+	/*
+	 * change handler to PIO
+	 */
+	pkt->handler = &usbhs_fifo_pio_pop_handler;
+	usbhs_pipe_config_change_bfre(pipe, 0);
+
+	return pkt->handler->prepare(pkt, is_done);
+}
+
+static int usbhsf_dma_prepare_pop(struct usbhs_pkt *pkt, int *is_done)
+{
+	struct usbhs_priv *priv = usbhs_pipe_to_priv(pkt->pipe);
+
+	if (usbhs_get_dparam(priv, has_usb_dmac))
+		return usbhsf_dma_prepare_pop_with_usb_dmac(pkt, is_done);
+	else
+		return usbhsf_dma_prepare_pop_with_rx_irq(pkt, is_done);
+}
+
+static int usbhsf_dma_try_pop_with_rx_irq(struct usbhs_pkt *pkt, int *is_done)
 {
 	struct usbhs_pipe *pipe = pkt->pipe;
 	struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe);
@@ -993,7 +1077,16 @@ usbhsf_pio_prepare_pop:
 	return pkt->handler->try_run(pkt, is_done);
 }
 
-static int usbhsf_dma_pop_done(struct usbhs_pkt *pkt, int *is_done)
+static int usbhsf_dma_try_pop(struct usbhs_pkt *pkt, int *is_done)
+{
+	struct usbhs_priv *priv = usbhs_pipe_to_priv(pkt->pipe);
+
+	BUG_ON(usbhs_get_dparam(priv, has_usb_dmac));
+
+	return usbhsf_dma_try_pop_with_rx_irq(pkt, is_done);
+}
+
+static int usbhsf_dma_pop_done_with_rx_irq(struct usbhs_pkt *pkt, int *is_done)
 {
 	struct usbhs_pipe *pipe = pkt->pipe;
 	int maxp = usbhs_pipe_get_maxpacket(pipe);
@@ -1017,8 +1110,68 @@ static int usbhsf_dma_pop_done(struct usbhs_pkt *pkt, int *is_done)
 	return 0;
 }
 
+static size_t usbhs_dma_calc_received_size(struct usbhs_pkt *pkt,
+					   struct dma_chan *chan, int dtln)
+{
+	struct usbhs_pipe *pipe = pkt->pipe;
+	struct dma_tx_state state;
+	size_t received_size;
+	int maxp = usbhs_pipe_get_maxpacket(pipe);
+
+	dmaengine_tx_status(chan, pkt->cookie, &state);
+	received_size = pkt->length - state.residue;
+
+	if (dtln) {
+		received_size -= USBHS_USB_DMAC_XFER_SIZE;
+		received_size &= ~(maxp - 1);
+		received_size += dtln;
+	}
+
+	return received_size;
+}
+
+static int usbhsf_dma_pop_done_with_usb_dmac(struct usbhs_pkt *pkt,
+					     int *is_done)
+{
+	struct usbhs_pipe *pipe = pkt->pipe;
+	struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe);
+	struct usbhs_fifo *fifo = usbhs_pipe_to_fifo(pipe);
+	struct dma_chan *chan = usbhsf_dma_chan_get(fifo, pkt);
+	int rcv_len;
+
+	/*
+	 * Since the driver disables rx_irq in DMA mode, the interrupt handler
+	 * cannot the BRDYSTS. So, the function clears it here because the
+	 * driver may use PIO mode next time.
+	 */
+	usbhs_xxxsts_clear(priv, BRDYSTS, usbhs_pipe_number(pipe));
+
+	rcv_len = usbhsf_fifo_rcv_len(priv, fifo);
+	usbhsf_fifo_clear(pipe, fifo);
+	pkt->actual = usbhs_dma_calc_received_size(pkt, chan, rcv_len);
+
+	usbhsf_dma_stop(pipe, fifo);
+	usbhsf_dma_unmap(pkt);
+	usbhsf_fifo_unselect(pipe, pipe->fifo);
+
+	/* The driver can assume the rx transaction is always "done" */
+	*is_done = 1;
+
+	return 0;
+}
+
+static int usbhsf_dma_pop_done(struct usbhs_pkt *pkt, int *is_done)
+{
+	struct usbhs_priv *priv = usbhs_pipe_to_priv(pkt->pipe);
+
+	if (usbhs_get_dparam(priv, has_usb_dmac))
+		return usbhsf_dma_pop_done_with_usb_dmac(pkt, is_done);
+	else
+		return usbhsf_dma_pop_done_with_rx_irq(pkt, is_done);
+}
+
 struct usbhs_pkt_handle usbhs_fifo_dma_pop_handler = {
-	.prepare	= usbhsf_prepare_pop,
+	.prepare	= usbhsf_dma_prepare_pop,
 	.try_run	= usbhsf_dma_try_pop,
 	.dma_done	= usbhsf_dma_pop_done
 };
diff --git a/drivers/usb/renesas_usbhs/fifo.h b/drivers/usb/renesas_usbhs/fifo.h
index f07037c1185f..04d3f8abad9e 100644
--- a/drivers/usb/renesas_usbhs/fifo.h
+++ b/drivers/usb/renesas_usbhs/fifo.h
@@ -58,6 +58,7 @@ struct usbhs_pkt {
 		     struct usbhs_pkt *pkt);
 	struct work_struct work;
 	dma_addr_t dma;
+	dma_cookie_t cookie;
 	void *buf;
 	int length;
 	int trans;
diff --git a/drivers/usb/renesas_usbhs/pipe.c b/drivers/usb/renesas_usbhs/pipe.c
index 007f45abe96c..4f9c3356127a 100644
--- a/drivers/usb/renesas_usbhs/pipe.c
+++ b/drivers/usb/renesas_usbhs/pipe.c
@@ -84,6 +84,17 @@ static void __usbhsp_pipe_xxx_set(struct usbhs_pipe *pipe,
 		usbhs_bset(priv, pipe_reg, mask, val);
 }
 
+static u16 __usbhsp_pipe_xxx_get(struct usbhs_pipe *pipe,
+				 u16 dcp_reg, u16 pipe_reg)
+{
+	struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe);
+
+	if (usbhs_pipe_is_dcp(pipe))
+		return usbhs_read(priv, dcp_reg);
+	else
+		return usbhs_read(priv, pipe_reg);
+}
+
 /*
  *		DCPCFG/PIPECFG functions
  */
@@ -92,6 +103,11 @@ static void usbhsp_pipe_cfg_set(struct usbhs_pipe *pipe, u16 mask, u16 val)
 	__usbhsp_pipe_xxx_set(pipe, DCPCFG, PIPECFG, mask, val);
 }
 
+static u16 usbhsp_pipe_cfg_get(struct usbhs_pipe *pipe)
+{
+	return __usbhsp_pipe_xxx_get(pipe, DCPCFG, PIPECFG);
+}
+
 /*
  *		PIPEnTRN/PIPEnTRE functions
  */
@@ -616,6 +632,11 @@ void usbhs_pipe_data_sequence(struct usbhs_pipe *pipe, int sequence)
 	usbhsp_pipectrl_set(pipe, mask, val);
 }
 
+static int usbhs_pipe_get_data_sequence(struct usbhs_pipe *pipe)
+{
+	return !!(usbhsp_pipectrl_get(pipe) & SQMON);
+}
+
 void usbhs_pipe_clear(struct usbhs_pipe *pipe)
 {
 	if (usbhs_pipe_is_dcp(pipe)) {
@@ -626,6 +647,24 @@ void usbhs_pipe_clear(struct usbhs_pipe *pipe)
 	}
 }
 
+void usbhs_pipe_config_change_bfre(struct usbhs_pipe *pipe, int enable)
+{
+	int sequence;
+
+	if (usbhs_pipe_is_dcp(pipe))
+		return;
+
+	usbhsp_pipe_select(pipe);
+	/* check if the driver needs to change the BFRE value */
+	if (!(enable ^ !!(usbhsp_pipe_cfg_get(pipe) & BFRE)))
+		return;
+
+	sequence = usbhs_pipe_get_data_sequence(pipe);
+	usbhsp_pipe_cfg_set(pipe, BFRE, enable ? BFRE : 0);
+	usbhs_pipe_clear(pipe);
+	usbhs_pipe_data_sequence(pipe, sequence);
+}
+
 static struct usbhs_pipe *usbhsp_get_pipe(struct usbhs_priv *priv, u32 type)
 {
 	struct usbhs_pipe *pos, *pipe;
diff --git a/drivers/usb/renesas_usbhs/pipe.h b/drivers/usb/renesas_usbhs/pipe.h
index d24a05972370..b0bc7b603016 100644
--- a/drivers/usb/renesas_usbhs/pipe.h
+++ b/drivers/usb/renesas_usbhs/pipe.h
@@ -97,6 +97,7 @@ void usbhs_pipe_set_trans_count_if_bulk(struct usbhs_pipe *pipe, int len);
 void usbhs_pipe_select_fifo(struct usbhs_pipe *pipe, struct usbhs_fifo *fifo);
 void usbhs_pipe_config_update(struct usbhs_pipe *pipe, u16 devsel,
 			      u16 epnum, u16 maxp);
+void usbhs_pipe_config_change_bfre(struct usbhs_pipe *pipe, int enable);
 
 #define usbhs_pipe_sequence_data0(pipe)	usbhs_pipe_data_sequence(pipe, 0)
 #define usbhs_pipe_sequence_data1(pipe)	usbhs_pipe_data_sequence(pipe, 1)
diff --git a/include/linux/usb/renesas_usbhs.h b/include/linux/usb/renesas_usbhs.h
index 9fd9e481ea98..f06529c14141 100644
--- a/include/linux/usb/renesas_usbhs.h
+++ b/include/linux/usb/renesas_usbhs.h
@@ -165,6 +165,8 @@ struct renesas_usbhs_driver_param {
 	 */
 	u32 has_otg:1; /* for controlling PWEN/EXTLP */
 	u32 has_sudmac:1; /* for SUDMAC */
+	u32 has_usb_dmac:1; /* for USB-DMAC */
+#define USBHS_USB_DMAC_XFER_SIZE	32	/* hardcode the xfer size */
 };
 
 #define USBHS_TYPE_R8A7790 1
-- 
cgit v1.2.3-59-g8ed1b


From 46f5cace1cd0559c335dfd4a5b8f57456d1bd6a1 Mon Sep 17 00:00:00 2001
From: Stephen Boyd <sboyd@codeaurora.org>
Date: Fri, 13 Mar 2015 11:09:42 -0700
Subject: usb: phy: msm: Remove dead code

This code is no longer used now that mach-msm has been removed.
Delete it.

Cc: Felipe Balbi <balbi@ti.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: linux-usb@vger.kernel.org
Cc: David Brown <davidb@codeaurora.org>
Cc: Bryan Huntsman <bryanh@codeaurora.org>
Cc: Daniel Walker <dwalker@fifo99.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Felipe Balbi <balbi@ti.com>
---
 drivers/usb/phy/Kconfig       |  2 +-
 drivers/usb/phy/phy-msm-usb.c | 18 ++----------------
 include/linux/usb/msm_hsusb.h |  4 ----
 3 files changed, 3 insertions(+), 21 deletions(-)

(limited to 'drivers/usb')

diff --git a/drivers/usb/phy/Kconfig b/drivers/usb/phy/Kconfig
index 52d3d58252e1..2fb3828b5089 100644
--- a/drivers/usb/phy/Kconfig
+++ b/drivers/usb/phy/Kconfig
@@ -139,7 +139,7 @@ config USB_ISP1301
 
 config USB_MSM_OTG
 	tristate "Qualcomm on-chip USB OTG controller support"
-	depends on (USB || USB_GADGET) && (ARCH_MSM || ARCH_QCOM || COMPILE_TEST)
+	depends on (USB || USB_GADGET) && (ARCH_QCOM || COMPILE_TEST)
 	depends on RESET_CONTROLLER
 	select USB_PHY
 	help
diff --git a/drivers/usb/phy/phy-msm-usb.c b/drivers/usb/phy/phy-msm-usb.c
index 000fd892455f..b50c45c62da7 100644
--- a/drivers/usb/phy/phy-msm-usb.c
+++ b/drivers/usb/phy/phy-msm-usb.c
@@ -263,9 +263,7 @@ static int msm_otg_link_clk_reset(struct msm_otg *motg, bool assert)
 {
 	int ret;
 
-	if (motg->pdata->link_clk_reset)
-		ret = motg->pdata->link_clk_reset(motg->clk, assert);
-	else if (assert)
+	if (assert)
 		ret = reset_control_assert(motg->link_rst);
 	else
 		ret = reset_control_deassert(motg->link_rst);
@@ -281,9 +279,7 @@ static int msm_otg_phy_clk_reset(struct msm_otg *motg)
 {
 	int ret = 0;
 
-	if (motg->pdata->phy_clk_reset)
-		ret = motg->pdata->phy_clk_reset(motg->phy_reset_clk);
-	else if (motg->phy_rst)
+	if (motg->phy_rst)
 		ret = reset_control_reset(motg->phy_rst);
 
 	if (ret)
@@ -1551,16 +1547,6 @@ static int msm_otg_probe(struct platform_device *pdev)
 	phy = &motg->phy;
 	phy->dev = &pdev->dev;
 
-	if (motg->pdata->phy_clk_reset) {
-		motg->phy_reset_clk = devm_clk_get(&pdev->dev,
-					   np ? "phy" : "usb_phy_clk");
-
-		if (IS_ERR(motg->phy_reset_clk)) {
-			dev_err(&pdev->dev, "failed to get usb_phy_clk\n");
-			return PTR_ERR(motg->phy_reset_clk);
-		}
-	}
-
 	motg->clk = devm_clk_get(&pdev->dev, np ? "core" : "usb_hs_clk");
 	if (IS_ERR(motg->clk)) {
 		dev_err(&pdev->dev, "failed to get usb_hs_clk\n");
diff --git a/include/linux/usb/msm_hsusb.h b/include/linux/usb/msm_hsusb.h
index b0a39243295a..7dbecf9a4656 100644
--- a/include/linux/usb/msm_hsusb.h
+++ b/include/linux/usb/msm_hsusb.h
@@ -117,8 +117,6 @@ struct msm_otg_platform_data {
 	enum otg_control_type otg_control;
 	enum msm_usb_phy_type phy_type;
 	void (*setup_gpio)(enum usb_otg_state state);
-	int (*link_clk_reset)(struct clk *link_clk, bool assert);
-	int (*phy_clk_reset)(struct clk *phy_clk);
 };
 
 /**
@@ -128,7 +126,6 @@ struct msm_otg_platform_data {
  * @irq: IRQ number assigned for HSUSB controller.
  * @clk: clock struct of usb_hs_clk.
  * @pclk: clock struct of usb_hs_pclk.
- * @phy_reset_clk: clock struct of usb_phy_clk.
  * @core_clk: clock struct of usb_hs_core_clk.
  * @regs: ioremapped register base address.
  * @inputs: OTG state machine inputs(Id, SessValid etc).
@@ -148,7 +145,6 @@ struct msm_otg {
 	int irq;
 	struct clk *clk;
 	struct clk *pclk;
-	struct clk *phy_reset_clk;
 	struct clk *core_clk;
 	void __iomem *regs;
 #define ID		0
-- 
cgit v1.2.3-59-g8ed1b


From d5d1e1bed4da02bd7a2352ab495721e31a7d95e4 Mon Sep 17 00:00:00 2001
From: Peter Chen <peter.chen@freescale.com>
Date: Wed, 11 Feb 2015 12:44:41 +0800
Subject: usb: chipidea: udc: return immediately if re-enable non-empty
 endpoint

Some gadget driver (like uac1) will try to enable endpoint again even
the ep is not empty, it will cause the ep reset again and may affect
the dTD list which has already queued.

It returns -EBUSY immediately, and indicate the endpoint is in use.
In this way, the ep's behavior will not be affected, and the gadget
driver is also notified.

Cc: Xuebing Wang <xbing6@gmail.com>
Signed-off-by: Peter Chen <peter.chen@freescale.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/chipidea/udc.c | 9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)

(limited to 'drivers/usb')

diff --git a/drivers/usb/chipidea/udc.c b/drivers/usb/chipidea/udc.c
index ff451048c1ac..52445428f254 100644
--- a/drivers/usb/chipidea/udc.c
+++ b/drivers/usb/chipidea/udc.c
@@ -1151,10 +1151,13 @@ static int ep_enable(struct usb_ep *ep,
 
 	/* only internal SW should enable ctrl endpts */
 
-	hwep->ep.desc = desc;
-
-	if (!list_empty(&hwep->qh.queue))
+	if (!list_empty(&hwep->qh.queue)) {
 		dev_warn(hwep->ci->dev, "enabling a non-empty endpoint!\n");
+		spin_unlock_irqrestore(hwep->lock, flags);
+		return -EBUSY;
+	}
+
+	hwep->ep.desc = desc;
 
 	hwep->dir  = usb_endpoint_dir_in(desc) ? TX : RX;
 	hwep->num  = usb_endpoint_num(desc);
-- 
cgit v1.2.3-59-g8ed1b


From 560400875d56d6e5f589a25319febcb32238f004 Mon Sep 17 00:00:00 2001
From: Peter Chen <peter.chen@freescale.com>
Date: Wed, 11 Feb 2015 12:44:42 +0800
Subject: usb: chipidea: imx: using common platform flag directly

It is meaningless the glue layer driver has its own platform flag
which is the same meaning with common platform flag.

Signed-off-by: Peter Chen <peter.chen@freescale.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/chipidea/ci_hdrc_imx.c | 8 ++------
 1 file changed, 2 insertions(+), 6 deletions(-)

(limited to 'drivers/usb')

diff --git a/drivers/usb/chipidea/ci_hdrc_imx.c b/drivers/usb/chipidea/ci_hdrc_imx.c
index 0f05de7c6b6c..421651060f8d 100644
--- a/drivers/usb/chipidea/ci_hdrc_imx.c
+++ b/drivers/usb/chipidea/ci_hdrc_imx.c
@@ -23,8 +23,6 @@
 #include "ci.h"
 #include "ci_hdrc_imx.h"
 
-#define CI_HDRC_IMX_IMX28_WRITE_FIX BIT(0)
-
 struct ci_hdrc_imx_platform_flag {
 	unsigned int flags;
 };
@@ -33,7 +31,7 @@ static const struct ci_hdrc_imx_platform_flag imx27_usb_data = {
 };
 
 static const struct ci_hdrc_imx_platform_flag imx28_usb_data = {
-	.flags = CI_HDRC_IMX_IMX28_WRITE_FIX,
+	.flags = CI_HDRC_IMX28_WRITE_FIX,
 };
 
 static const struct of_device_id ci_hdrc_imx_dt_ids[] = {
@@ -145,9 +143,7 @@ static int ci_hdrc_imx_probe(struct platform_device *pdev)
 	}
 
 	pdata.usb_phy = data->phy;
-
-	if (imx_platform_flag->flags & CI_HDRC_IMX_IMX28_WRITE_FIX)
-		pdata.flags |= CI_HDRC_IMX28_WRITE_FIX;
+	pdata.flags |= imx_platform_flag->flags;
 
 	ret = dma_coerce_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32));
 	if (ret)
-- 
cgit v1.2.3-59-g8ed1b


From 73dea4a912b2bfe955305de4891018f9e71e399d Mon Sep 17 00:00:00 2001
From: Peter Chen <peter.chen@freescale.com>
Date: Wed, 11 Feb 2015 12:44:43 +0800
Subject: usb: chipidea: usbmisc_imx: delete clock information

All imx usb controller's non core registers uses the same clock gate with
core registers, the usbmisc_imx is the library for imx glue driver, the
glue keeps clock on when it calls usbmisc_imx API to change non-core register.

Besides, we will support runtime pm in the future, it also needs to
close this clock when the usb is not in use.

Philipp Zabel also verifies it at imx6q platform, see
http://www.spinics.net/lists/linux-usb/msg118491.html

Cc: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Peter Chen <peter.chen@freescale.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/chipidea/usbmisc_imx.c | 19 -------------------
 1 file changed, 19 deletions(-)

(limited to 'drivers/usb')

diff --git a/drivers/usb/chipidea/usbmisc_imx.c b/drivers/usb/chipidea/usbmisc_imx.c
index c3c6225b8acf..93856027d6f4 100644
--- a/drivers/usb/chipidea/usbmisc_imx.c
+++ b/drivers/usb/chipidea/usbmisc_imx.c
@@ -11,7 +11,6 @@
 
 #include <linux/module.h>
 #include <linux/of_platform.h>
-#include <linux/clk.h>
 #include <linux/err.h>
 #include <linux/io.h>
 #include <linux/delay.h>
@@ -69,7 +68,6 @@ struct usbmisc_ops {
 struct imx_usbmisc {
 	void __iomem *base;
 	spinlock_t lock;
-	struct clk *clk;
 	const struct usbmisc_ops *ops;
 };
 
@@ -322,7 +320,6 @@ static int usbmisc_imx_probe(struct platform_device *pdev)
 {
 	struct resource	*res;
 	struct imx_usbmisc *data;
-	int ret;
 	struct of_device_id *tmp_dev;
 
 	data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
@@ -336,20 +333,6 @@ static int usbmisc_imx_probe(struct platform_device *pdev)
 	if (IS_ERR(data->base))
 		return PTR_ERR(data->base);
 
-	data->clk = devm_clk_get(&pdev->dev, NULL);
-	if (IS_ERR(data->clk)) {
-		dev_err(&pdev->dev,
-			"failed to get clock, err=%ld\n", PTR_ERR(data->clk));
-		return PTR_ERR(data->clk);
-	}
-
-	ret = clk_prepare_enable(data->clk);
-	if (ret) {
-		dev_err(&pdev->dev,
-			"clk_prepare_enable failed, err=%d\n", ret);
-		return ret;
-	}
-
 	tmp_dev = (struct of_device_id *)
 		of_match_device(usbmisc_imx_dt_ids, &pdev->dev);
 	data->ops = (const struct usbmisc_ops *)tmp_dev->data;
@@ -360,8 +343,6 @@ static int usbmisc_imx_probe(struct platform_device *pdev)
 
 static int usbmisc_imx_remove(struct platform_device *pdev)
 {
-	struct imx_usbmisc *usbmisc = dev_get_drvdata(&pdev->dev);
-	clk_disable_unprepare(usbmisc->clk);
 	return 0;
 }
 
-- 
cgit v1.2.3-59-g8ed1b


From a4cf1b14cfbc57a12ea2d997b93735a99f70d810 Mon Sep 17 00:00:00 2001
From: Peter Chen <peter.chen@freescale.com>
Date: Wed, 11 Feb 2015 12:44:44 +0800
Subject: usb: chipidea: imx: simplify the usbmisc callers

Move struct imx_usbmisc_data NULL pointer judgement from caller to
each API, it can simplify the caller.

Signed-off-by: Peter Chen <peter.chen@freescale.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/chipidea/ci_hdrc_imx.c | 22 ++++++++--------------
 drivers/usb/chipidea/usbmisc_imx.c | 12 ++++++++++--
 2 files changed, 18 insertions(+), 16 deletions(-)

(limited to 'drivers/usb')

diff --git a/drivers/usb/chipidea/ci_hdrc_imx.c b/drivers/usb/chipidea/ci_hdrc_imx.c
index 421651060f8d..353989e5675b 100644
--- a/drivers/usb/chipidea/ci_hdrc_imx.c
+++ b/drivers/usb/chipidea/ci_hdrc_imx.c
@@ -149,13 +149,10 @@ static int ci_hdrc_imx_probe(struct platform_device *pdev)
 	if (ret)
 		goto err_clk;
 
-	if (data->usbmisc_data) {
-		ret = imx_usbmisc_init(data->usbmisc_data);
-		if (ret) {
-			dev_err(&pdev->dev, "usbmisc init failed, ret=%d\n",
-					ret);
-			goto err_clk;
-		}
+	ret = imx_usbmisc_init(data->usbmisc_data);
+	if (ret) {
+		dev_err(&pdev->dev, "usbmisc init failed, ret=%d\n", ret);
+		goto err_clk;
 	}
 
 	data->ci_pdev = ci_hdrc_add_device(&pdev->dev,
@@ -169,13 +166,10 @@ static int ci_hdrc_imx_probe(struct platform_device *pdev)
 		goto err_clk;
 	}
 
-	if (data->usbmisc_data) {
-		ret = imx_usbmisc_init_post(data->usbmisc_data);
-		if (ret) {
-			dev_err(&pdev->dev, "usbmisc post failed, ret=%d\n",
-					ret);
-			goto disable_device;
-		}
+	ret = imx_usbmisc_init_post(data->usbmisc_data);
+	if (ret) {
+		dev_err(&pdev->dev, "usbmisc post failed, ret=%d\n", ret);
+		goto disable_device;
 	}
 
 	platform_set_drvdata(pdev, data);
diff --git a/drivers/usb/chipidea/usbmisc_imx.c b/drivers/usb/chipidea/usbmisc_imx.c
index 93856027d6f4..eb77e3285c8a 100644
--- a/drivers/usb/chipidea/usbmisc_imx.c
+++ b/drivers/usb/chipidea/usbmisc_imx.c
@@ -265,8 +265,12 @@ static const struct usbmisc_ops vf610_usbmisc_ops = {
 
 int imx_usbmisc_init(struct imx_usbmisc_data *data)
 {
-	struct imx_usbmisc *usbmisc = dev_get_drvdata(data->dev);
+	struct imx_usbmisc *usbmisc;
+
+	if (!data)
+		return 0;
 
+	usbmisc = dev_get_drvdata(data->dev);
 	if (!usbmisc->ops->init)
 		return 0;
 	return usbmisc->ops->init(data);
@@ -275,8 +279,12 @@ EXPORT_SYMBOL_GPL(imx_usbmisc_init);
 
 int imx_usbmisc_init_post(struct imx_usbmisc_data *data)
 {
-	struct imx_usbmisc *usbmisc = dev_get_drvdata(data->dev);
+	struct imx_usbmisc *usbmisc;
+
+	if (!data)
+		return 0;
 
+	usbmisc = dev_get_drvdata(data->dev);
 	if (!usbmisc->ops->post)
 		return 0;
 	return usbmisc->ops->post(data);
-- 
cgit v1.2.3-59-g8ed1b


From 1f874edcb7318c5dd71025df9f3849715b4e4f71 Mon Sep 17 00:00:00 2001
From: Peter Chen <peter.chen@freescale.com>
Date: Wed, 11 Feb 2015 12:44:45 +0800
Subject: usb: chipidea: add runtime power management support

Add runtime power management support.

Signed-off-by: Peter Chen <peter.chen@freescale.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/chipidea/ci.h    |   6 +++
 drivers/usb/chipidea/core.c  | 100 ++++++++++++++++++++++++++++++++++++++++---
 drivers/usb/chipidea/otg.c   |   2 +
 include/linux/usb/chipidea.h |   1 +
 4 files changed, 103 insertions(+), 6 deletions(-)

(limited to 'drivers/usb')

diff --git a/drivers/usb/chipidea/ci.h b/drivers/usb/chipidea/ci.h
index 65913d48f0c8..a0aeb8df9280 100644
--- a/drivers/usb/chipidea/ci.h
+++ b/drivers/usb/chipidea/ci.h
@@ -169,6 +169,9 @@ struct hw_bank {
  * @b_sess_valid_event: indicates there is a vbus event, and handled
  * at ci_otg_work
  * @imx28_write_fix: Freescale imx28 needs swp instruction for writing
+ * @supports_runtime_pm: if runtime pm is supported
+ * @in_lpm: if the core in low power mode
+ * @wakeup_int: if wakeup interrupt occur
  */
 struct ci_hdrc {
 	struct device			*dev;
@@ -211,6 +214,9 @@ struct ci_hdrc {
 	bool				id_event;
 	bool				b_sess_valid_event;
 	bool				imx28_write_fix;
+	bool				supports_runtime_pm;
+	bool				in_lpm;
+	bool				wakeup_int;
 };
 
 static inline struct ci_role_driver *ci_role(struct ci_hdrc *ci)
diff --git a/drivers/usb/chipidea/core.c b/drivers/usb/chipidea/core.c
index a57dc8866fc5..63d2b398c9a0 100644
--- a/drivers/usb/chipidea/core.c
+++ b/drivers/usb/chipidea/core.c
@@ -491,6 +491,13 @@ static irqreturn_t ci_irq(int irq, void *data)
 	irqreturn_t ret = IRQ_NONE;
 	u32 otgsc = 0;
 
+	if (ci->in_lpm) {
+		disable_irq_nosync(irq);
+		ci->wakeup_int = true;
+		pm_runtime_get(ci->dev);
+		return IRQ_HANDLED;
+	}
+
 	if (ci->is_otg) {
 		otgsc = hw_read_otgsc(ci, ~0);
 		if (ci_otg_is_fsm_mode(ci)) {
@@ -673,6 +680,8 @@ static int ci_hdrc_probe(struct platform_device *pdev)
 	ci->platdata = dev_get_platdata(dev);
 	ci->imx28_write_fix = !!(ci->platdata->flags &
 		CI_HDRC_IMX28_WRITE_FIX);
+	ci->supports_runtime_pm = !!(ci->platdata->flags &
+		CI_HDRC_SUPPORTS_RUNTIME_PM);
 
 	ret = hw_device_init(ci, base);
 	if (ret < 0) {
@@ -788,6 +797,14 @@ static int ci_hdrc_probe(struct platform_device *pdev)
 	if (ret)
 		goto stop;
 
+	if (ci->supports_runtime_pm) {
+		pm_runtime_set_active(&pdev->dev);
+		pm_runtime_enable(&pdev->dev);
+		pm_runtime_set_autosuspend_delay(&pdev->dev, 2000);
+		pm_runtime_mark_last_busy(ci->dev);
+		pm_runtime_use_autosuspend(&pdev->dev);
+	}
+
 	if (ci_otg_is_fsm_mode(ci))
 		ci_hdrc_otg_fsm_start(ci);
 
@@ -807,6 +824,12 @@ static int ci_hdrc_remove(struct platform_device *pdev)
 {
 	struct ci_hdrc *ci = platform_get_drvdata(pdev);
 
+	if (ci->supports_runtime_pm) {
+		pm_runtime_get_sync(&pdev->dev);
+		pm_runtime_disable(&pdev->dev);
+		pm_runtime_put_noidle(&pdev->dev);
+	}
+
 	dbg_remove_files(ci);
 	ci_role_destroy(ci);
 	ci_hdrc_enter_lpm(ci, true);
@@ -815,13 +838,14 @@ static int ci_hdrc_remove(struct platform_device *pdev)
 	return 0;
 }
 
-#ifdef CONFIG_PM_SLEEP
+#ifdef CONFIG_PM
 static void ci_controller_suspend(struct ci_hdrc *ci)
 {
+	disable_irq(ci->irq);
 	ci_hdrc_enter_lpm(ci, true);
-
-	if (ci->usb_phy)
-		usb_phy_set_suspend(ci->usb_phy, 1);
+	usb_phy_set_suspend(ci->usb_phy, 1);
+	ci->in_lpm = true;
+	enable_irq(ci->irq);
 }
 
 static int ci_controller_resume(struct device *dev)
@@ -830,23 +854,49 @@ static int ci_controller_resume(struct device *dev)
 
 	dev_dbg(dev, "at %s\n", __func__);
 
-	ci_hdrc_enter_lpm(ci, false);
+	if (!ci->in_lpm) {
+		WARN_ON(1);
+		return 0;
+	}
 
+	ci_hdrc_enter_lpm(ci, false);
 	if (ci->usb_phy) {
 		usb_phy_set_suspend(ci->usb_phy, 0);
 		usb_phy_set_wakeup(ci->usb_phy, false);
 		hw_wait_phy_stable();
 	}
 
+	ci->in_lpm = false;
+	if (ci->wakeup_int) {
+		ci->wakeup_int = false;
+		pm_runtime_mark_last_busy(ci->dev);
+		pm_runtime_put_autosuspend(ci->dev);
+		enable_irq(ci->irq);
+	}
+
 	return 0;
 }
 
+#ifdef CONFIG_PM_SLEEP
 static int ci_suspend(struct device *dev)
 {
 	struct ci_hdrc *ci = dev_get_drvdata(dev);
 
 	if (ci->wq)
 		flush_workqueue(ci->wq);
+	/*
+	 * Controller needs to be active during suspend, otherwise the core
+	 * may run resume when the parent is at suspend if other driver's
+	 * suspend fails, it occurs before parent's suspend has not started,
+	 * but the core suspend has finished.
+	 */
+	if (ci->in_lpm)
+		pm_runtime_resume(dev);
+
+	if (ci->in_lpm) {
+		WARN_ON(1);
+		return 0;
+	}
 
 	ci_controller_suspend(ci);
 
@@ -855,13 +905,51 @@ static int ci_suspend(struct device *dev)
 
 static int ci_resume(struct device *dev)
 {
-	return ci_controller_resume(dev);
+	struct ci_hdrc *ci = dev_get_drvdata(dev);
+	int ret;
+
+	ret = ci_controller_resume(dev);
+	if (ret)
+		return ret;
+
+	if (ci->supports_runtime_pm) {
+		pm_runtime_disable(dev);
+		pm_runtime_set_active(dev);
+		pm_runtime_enable(dev);
+	}
+
+	return ret;
 }
 #endif /* CONFIG_PM_SLEEP */
 
+static int ci_runtime_suspend(struct device *dev)
+{
+	struct ci_hdrc *ci = dev_get_drvdata(dev);
+
+	dev_dbg(dev, "at %s\n", __func__);
+
+	if (ci->in_lpm) {
+		WARN_ON(1);
+		return 0;
+	}
+
+	usb_phy_set_wakeup(ci->usb_phy, true);
+	ci_controller_suspend(ci);
+
+	return 0;
+}
+
+static int ci_runtime_resume(struct device *dev)
+{
+	return ci_controller_resume(dev);
+}
+
+#endif /* CONFIG_PM */
 static const struct dev_pm_ops ci_pm_ops = {
 	SET_SYSTEM_SLEEP_PM_OPS(ci_suspend, ci_resume)
+	SET_RUNTIME_PM_OPS(ci_runtime_suspend, ci_runtime_resume, NULL)
 };
+
 static struct platform_driver ci_hdrc_driver = {
 	.probe	= ci_hdrc_probe,
 	.remove	= ci_hdrc_remove,
diff --git a/drivers/usb/chipidea/otg.c b/drivers/usb/chipidea/otg.c
index a048b08b9d4d..ad6c87a4653c 100644
--- a/drivers/usb/chipidea/otg.c
+++ b/drivers/usb/chipidea/otg.c
@@ -96,6 +96,7 @@ static void ci_otg_work(struct work_struct *work)
 		return;
 	}
 
+	pm_runtime_get_sync(ci->dev);
 	if (ci->id_event) {
 		ci->id_event = false;
 		ci_handle_id_switch(ci);
@@ -104,6 +105,7 @@ static void ci_otg_work(struct work_struct *work)
 		ci_handle_vbus_change(ci);
 	} else
 		dev_err(ci->dev, "unexpected event occurs at %s\n", __func__);
+	pm_runtime_put_sync(ci->dev);
 
 	enable_irq(ci->irq);
 }
diff --git a/include/linux/usb/chipidea.h b/include/linux/usb/chipidea.h
index 535997a6681b..39ba00f0d1d5 100644
--- a/include/linux/usb/chipidea.h
+++ b/include/linux/usb/chipidea.h
@@ -19,6 +19,7 @@ struct ci_hdrc_platform_data {
 	enum usb_phy_interface phy_mode;
 	unsigned long	 flags;
 #define CI_HDRC_REGS_SHARED		BIT(0)
+#define CI_HDRC_SUPPORTS_RUNTIME_PM	BIT(2)
 #define CI_HDRC_DISABLE_STREAMING	BIT(3)
 	/*
 	 * Only set it when DCCPARAMS.DC==1 and DCCPARAMS.HC==1,
-- 
cgit v1.2.3-59-g8ed1b


From f636cec559c6c01d6a262123446a142e1ae66890 Mon Sep 17 00:00:00 2001
From: Peter Chen <peter.chen@freescale.com>
Date: Wed, 11 Feb 2015 12:44:46 +0800
Subject: usb: chipidea: usbmisc_imx: add .set_wakeup interface

This API is used to enable/disable usb wakeup, only imx6 series are
added, since I don't have other imx hardware on hand. Other imx users
can add their API according to reference manual after testing.

Signed-off-by: Peter Chen <peter.chen@freescale.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/chipidea/ci_hdrc_imx.h |  1 +
 drivers/usb/chipidea/usbmisc_imx.c | 52 ++++++++++++++++++++++++++++++++++++++
 2 files changed, 53 insertions(+)

(limited to 'drivers/usb')

diff --git a/drivers/usb/chipidea/ci_hdrc_imx.h b/drivers/usb/chipidea/ci_hdrc_imx.h
index 4ed828f75a1e..635717e9354a 100644
--- a/drivers/usb/chipidea/ci_hdrc_imx.h
+++ b/drivers/usb/chipidea/ci_hdrc_imx.h
@@ -22,5 +22,6 @@ struct imx_usbmisc_data {
 
 int imx_usbmisc_init(struct imx_usbmisc_data *);
 int imx_usbmisc_init_post(struct imx_usbmisc_data *);
+int imx_usbmisc_set_wakeup(struct imx_usbmisc_data *, bool);
 
 #endif /* __DRIVER_USB_CHIPIDEA_CI_HDRC_IMX_H */
diff --git a/drivers/usb/chipidea/usbmisc_imx.c b/drivers/usb/chipidea/usbmisc_imx.c
index eb77e3285c8a..90b7d7f3c81b 100644
--- a/drivers/usb/chipidea/usbmisc_imx.c
+++ b/drivers/usb/chipidea/usbmisc_imx.c
@@ -55,6 +55,10 @@
 #define MX53_USB_PLL_DIV_24_MHZ		0x01
 
 #define MX6_BM_OVER_CUR_DIS		BIT(7)
+#define MX6_BM_WAKEUP_ENABLE		BIT(10)
+#define MX6_BM_ID_WAKEUP		BIT(16)
+#define MX6_BM_VBUS_WAKEUP		BIT(17)
+#define MX6_BM_WAKEUP_INTR		BIT(31)
 
 #define VF610_OVER_CUR_DIS		BIT(7)
 
@@ -63,6 +67,8 @@ struct usbmisc_ops {
 	int (*init)(struct imx_usbmisc_data *data);
 	/* It's called once after adding a usb device */
 	int (*post)(struct imx_usbmisc_data *data);
+	/* It's called when we need to enable/disable usb wakeup */
+	int (*set_wakeup)(struct imx_usbmisc_data *data, bool enabled);
 };
 
 struct imx_usbmisc {
@@ -202,6 +208,35 @@ static int usbmisc_imx53_init(struct imx_usbmisc_data *data)
 	return 0;
 }
 
+static int usbmisc_imx6q_set_wakeup
+	(struct imx_usbmisc_data *data, bool enabled)
+{
+	struct imx_usbmisc *usbmisc = dev_get_drvdata(data->dev);
+	unsigned long flags;
+	u32 val;
+	u32 wakeup_setting = (MX6_BM_WAKEUP_ENABLE |
+		MX6_BM_VBUS_WAKEUP | MX6_BM_ID_WAKEUP);
+	int ret = 0;
+
+	if (data->index > 3)
+		return -EINVAL;
+
+	spin_lock_irqsave(&usbmisc->lock, flags);
+	val = readl(usbmisc->base + data->index * 4);
+	if (enabled) {
+		val |= wakeup_setting;
+		writel(val, usbmisc->base + data->index * 4);
+	} else {
+		if (val & MX6_BM_WAKEUP_INTR)
+			pr_debug("wakeup int at ci_hdrc.%d\n", data->index);
+		val &= ~wakeup_setting;
+		writel(val, usbmisc->base + data->index * 4);
+	}
+	spin_unlock_irqrestore(&usbmisc->lock, flags);
+
+	return ret;
+}
+
 static int usbmisc_imx6q_init(struct imx_usbmisc_data *data)
 {
 	struct imx_usbmisc *usbmisc = dev_get_drvdata(data->dev);
@@ -219,6 +254,8 @@ static int usbmisc_imx6q_init(struct imx_usbmisc_data *data)
 		spin_unlock_irqrestore(&usbmisc->lock, flags);
 	}
 
+	usbmisc_imx6q_set_wakeup(data, false);
+
 	return 0;
 }
 
@@ -256,6 +293,7 @@ static const struct usbmisc_ops imx53_usbmisc_ops = {
 };
 
 static const struct usbmisc_ops imx6q_usbmisc_ops = {
+	.set_wakeup = usbmisc_imx6q_set_wakeup,
 	.init = usbmisc_imx6q_init,
 };
 
@@ -291,6 +329,20 @@ int imx_usbmisc_init_post(struct imx_usbmisc_data *data)
 }
 EXPORT_SYMBOL_GPL(imx_usbmisc_init_post);
 
+int imx_usbmisc_set_wakeup(struct imx_usbmisc_data *data, bool enabled)
+{
+	struct imx_usbmisc *usbmisc;
+
+	if (!data)
+		return 0;
+
+	usbmisc = dev_get_drvdata(data->dev);
+	if (!usbmisc->ops->set_wakeup)
+		return 0;
+	return usbmisc->ops->set_wakeup(data, enabled);
+}
+EXPORT_SYMBOL_GPL(imx_usbmisc_set_wakeup);
+
 static const struct of_device_id usbmisc_imx_dt_ids[] = {
 	{
 		.compatible = "fsl,imx25-usbmisc",
-- 
cgit v1.2.3-59-g8ed1b


From e14db48dfcf3ab6ebea212e82dc56036a00b0d6b Mon Sep 17 00:00:00 2001
From: Peter Chen <peter.chen@freescale.com>
Date: Wed, 11 Feb 2015 12:44:47 +0800
Subject: usb: chipidea: imx: add runtime power management support

Add runtime pm support for imx, only imx6 series are supported and tested.

Signed-off-by: Peter Chen <peter.chen@freescale.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/chipidea/ci_hdrc_imx.c | 106 ++++++++++++++++++++++++++++++++++---
 1 file changed, 100 insertions(+), 6 deletions(-)

(limited to 'drivers/usb')

diff --git a/drivers/usb/chipidea/ci_hdrc_imx.c b/drivers/usb/chipidea/ci_hdrc_imx.c
index 353989e5675b..5ad85fe84411 100644
--- a/drivers/usb/chipidea/ci_hdrc_imx.c
+++ b/drivers/usb/chipidea/ci_hdrc_imx.c
@@ -25,6 +25,7 @@
 
 struct ci_hdrc_imx_platform_flag {
 	unsigned int flags;
+	bool runtime_pm;
 };
 
 static const struct ci_hdrc_imx_platform_flag imx27_usb_data = {
@@ -34,9 +35,24 @@ static const struct ci_hdrc_imx_platform_flag imx28_usb_data = {
 	.flags = CI_HDRC_IMX28_WRITE_FIX,
 };
 
+static const struct ci_hdrc_imx_platform_flag imx6q_usb_data = {
+	.flags = CI_HDRC_SUPPORTS_RUNTIME_PM,
+};
+
+static const struct ci_hdrc_imx_platform_flag imx6sl_usb_data = {
+	.flags = CI_HDRC_SUPPORTS_RUNTIME_PM,
+};
+
+static const struct ci_hdrc_imx_platform_flag imx6sx_usb_data = {
+	.flags = CI_HDRC_SUPPORTS_RUNTIME_PM,
+};
+
 static const struct of_device_id ci_hdrc_imx_dt_ids[] = {
 	{ .compatible = "fsl,imx28-usb", .data = &imx28_usb_data},
 	{ .compatible = "fsl,imx27-usb", .data = &imx27_usb_data},
+	{ .compatible = "fsl,imx6q-usb", .data = &imx6q_usb_data},
+	{ .compatible = "fsl,imx6sl-usb", .data = &imx6sl_usb_data},
+	{ .compatible = "fsl,imx6sx-usb", .data = &imx6sl_usb_data},
 	{ /* sentinel */ }
 };
 MODULE_DEVICE_TABLE(of, ci_hdrc_imx_dt_ids);
@@ -46,6 +62,8 @@ struct ci_hdrc_imx_data {
 	struct platform_device *ci_pdev;
 	struct clk *clk;
 	struct imx_usbmisc_data *usbmisc_data;
+	bool supports_runtime_pm;
+	bool in_lpm;
 };
 
 /* Common functions shared by usbmisc drivers */
@@ -144,6 +162,8 @@ static int ci_hdrc_imx_probe(struct platform_device *pdev)
 
 	pdata.usb_phy = data->phy;
 	pdata.flags |= imx_platform_flag->flags;
+	if (pdata.flags & CI_HDRC_SUPPORTS_RUNTIME_PM)
+		data->supports_runtime_pm = true;
 
 	ret = dma_coerce_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32));
 	if (ret)
@@ -174,8 +194,10 @@ static int ci_hdrc_imx_probe(struct platform_device *pdev)
 
 	platform_set_drvdata(pdev, data);
 
-	pm_runtime_no_callbacks(&pdev->dev);
-	pm_runtime_enable(&pdev->dev);
+	if (data->supports_runtime_pm) {
+		pm_runtime_set_active(&pdev->dev);
+		pm_runtime_enable(&pdev->dev);
+	}
 
 	return 0;
 
@@ -190,14 +212,18 @@ static int ci_hdrc_imx_remove(struct platform_device *pdev)
 {
 	struct ci_hdrc_imx_data *data = platform_get_drvdata(pdev);
 
-	pm_runtime_disable(&pdev->dev);
+	if (data->supports_runtime_pm) {
+		pm_runtime_get_sync(&pdev->dev);
+		pm_runtime_disable(&pdev->dev);
+		pm_runtime_put_noidle(&pdev->dev);
+	}
 	ci_hdrc_remove_device(data->ci_pdev);
 	clk_disable_unprepare(data->clk);
 
 	return 0;
 }
 
-#ifdef CONFIG_PM_SLEEP
+#ifdef CONFIG_PM
 static int imx_controller_suspend(struct device *dev)
 {
 	struct ci_hdrc_imx_data *data = dev_get_drvdata(dev);
@@ -205,6 +231,7 @@ static int imx_controller_suspend(struct device *dev)
 	dev_dbg(dev, "at %s\n", __func__);
 
 	clk_disable_unprepare(data->clk);
+	data->in_lpm = true;
 
 	return 0;
 }
@@ -212,25 +239,92 @@ static int imx_controller_suspend(struct device *dev)
 static int imx_controller_resume(struct device *dev)
 {
 	struct ci_hdrc_imx_data *data = dev_get_drvdata(dev);
+	int ret = 0;
 
 	dev_dbg(dev, "at %s\n", __func__);
 
-	return clk_prepare_enable(data->clk);
+	if (!data->in_lpm) {
+		WARN_ON(1);
+		return 0;
+	}
+
+	ret = clk_prepare_enable(data->clk);
+	if (ret)
+		return ret;
+
+	data->in_lpm = false;
+
+	ret = imx_usbmisc_set_wakeup(data->usbmisc_data, false);
+	if (ret) {
+		dev_err(dev, "usbmisc set_wakeup failed, ret=%d\n", ret);
+		goto clk_disable;
+	}
+
+	return 0;
+
+clk_disable:
+	clk_disable_unprepare(data->clk);
+	return ret;
 }
 
+#ifdef CONFIG_PM_SLEEP
 static int ci_hdrc_imx_suspend(struct device *dev)
 {
+	struct ci_hdrc_imx_data *data = dev_get_drvdata(dev);
+
+	if (data->in_lpm)
+		/* The core's suspend doesn't run */
+		return 0;
+
 	return imx_controller_suspend(dev);
 }
 
 static int ci_hdrc_imx_resume(struct device *dev)
 {
-	return imx_controller_resume(dev);
+	struct ci_hdrc_imx_data *data = dev_get_drvdata(dev);
+	int ret;
+
+	ret = imx_controller_resume(dev);
+	if (!ret && data->supports_runtime_pm) {
+		pm_runtime_disable(dev);
+		pm_runtime_set_active(dev);
+		pm_runtime_enable(dev);
+	}
+
+	return ret;
 }
 #endif /* CONFIG_PM_SLEEP */
 
+static int ci_hdrc_imx_runtime_suspend(struct device *dev)
+{
+	struct ci_hdrc_imx_data *data = dev_get_drvdata(dev);
+	int ret;
+
+	if (data->in_lpm) {
+		WARN_ON(1);
+		return 0;
+	}
+
+	ret = imx_usbmisc_set_wakeup(data->usbmisc_data, true);
+	if (ret) {
+		dev_err(dev, "usbmisc set_wakeup failed, ret=%d\n", ret);
+		return ret;
+	}
+
+	return imx_controller_suspend(dev);
+}
+
+static int ci_hdrc_imx_runtime_resume(struct device *dev)
+{
+	return imx_controller_resume(dev);
+}
+
+#endif /* CONFIG_PM */
+
 static const struct dev_pm_ops ci_hdrc_imx_pm_ops = {
 	SET_SYSTEM_SLEEP_PM_OPS(ci_hdrc_imx_suspend, ci_hdrc_imx_resume)
+	SET_RUNTIME_PM_OPS(ci_hdrc_imx_runtime_suspend,
+			ci_hdrc_imx_runtime_resume, NULL)
 };
 static struct platform_driver ci_hdrc_imx_driver = {
 	.probe = ci_hdrc_imx_probe,
-- 
cgit v1.2.3-59-g8ed1b


From f8efa7665e66c1e92fa10492a243cc0de4437ade Mon Sep 17 00:00:00 2001
From: Peter Chen <peter.chen@freescale.com>
Date: Wed, 11 Feb 2015 12:44:48 +0800
Subject: usb: chipidea: add usb as system wakeup source

The USB signal can be system wakeup source, this patch add the
support, for how to enable it, see Documentation/usb/chipidea.txt.
Since USB wakeup enable logic is vendor/platform specific, the
glue layer needs to implement it to support this feature.

Signed-off-by: Peter Chen <peter.chen@freescale.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/chipidea/core.c | 10 ++++++++++
 1 file changed, 10 insertions(+)

(limited to 'drivers/usb')

diff --git a/drivers/usb/chipidea/core.c b/drivers/usb/chipidea/core.c
index 63d2b398c9a0..6d9dc2d175eb 100644
--- a/drivers/usb/chipidea/core.c
+++ b/drivers/usb/chipidea/core.c
@@ -808,6 +808,8 @@ static int ci_hdrc_probe(struct platform_device *pdev)
 	if (ci_otg_is_fsm_mode(ci))
 		ci_hdrc_otg_fsm_start(ci);
 
+	device_set_wakeup_capable(&pdev->dev, true);
+
 	ret = dbg_create_files(ci);
 	if (!ret)
 		return 0;
@@ -898,6 +900,11 @@ static int ci_suspend(struct device *dev)
 		return 0;
 	}
 
+	if (device_may_wakeup(dev)) {
+		usb_phy_set_wakeup(ci->usb_phy, true);
+		enable_irq_wake(ci->irq);
+	}
+
 	ci_controller_suspend(ci);
 
 	return 0;
@@ -908,6 +915,9 @@ static int ci_resume(struct device *dev)
 	struct ci_hdrc *ci = dev_get_drvdata(dev);
 	int ret;
 
+	if (device_may_wakeup(dev))
+		disable_irq_wake(ci->irq);
+
 	ret = ci_controller_resume(dev);
 	if (ret)
 		return ret;
-- 
cgit v1.2.3-59-g8ed1b


From 6d6531104d20692190690ed73eaaac770c42aa49 Mon Sep 17 00:00:00 2001
From: Peter Chen <peter.chen@freescale.com>
Date: Wed, 11 Feb 2015 12:44:49 +0800
Subject: usb: chipidea: imx: add usb as system wakeup source

Enable USB as system wakeup source, and each platform needs to implement
imx_usbmisc_set_wakeup in usbmisc_imx.c to support.

Signed-off-by: Peter Chen <peter.chen@freescale.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/chipidea/ci_hdrc_imx.c | 13 +++++++++++++
 1 file changed, 13 insertions(+)

(limited to 'drivers/usb')

diff --git a/drivers/usb/chipidea/ci_hdrc_imx.c b/drivers/usb/chipidea/ci_hdrc_imx.c
index 5ad85fe84411..f7f9fd45c9ea 100644
--- a/drivers/usb/chipidea/ci_hdrc_imx.c
+++ b/drivers/usb/chipidea/ci_hdrc_imx.c
@@ -199,6 +199,8 @@ static int ci_hdrc_imx_probe(struct platform_device *pdev)
 		pm_runtime_enable(&pdev->dev);
 	}
 
+	device_set_wakeup_capable(&pdev->dev, true);
+
 	return 0;
 
 disable_device:
@@ -270,12 +272,23 @@ clk_disable:
 #ifdef CONFIG_PM_SLEEP
 static int ci_hdrc_imx_suspend(struct device *dev)
 {
+	int ret;
+
 	struct ci_hdrc_imx_data *data = dev_get_drvdata(dev);
 
 	if (data->in_lpm)
 		/* The core's suspend doesn't run */
 		return 0;
 
+	if (device_may_wakeup(dev)) {
+		ret = imx_usbmisc_set_wakeup(data->usbmisc_data, true);
+		if (ret) {
+			dev_err(dev, "usbmisc set_wakeup failed, ret=%d\n",
+					ret);
+			return ret;
+		}
+	}
+
 	return imx_controller_suspend(dev);
 }
 
-- 
cgit v1.2.3-59-g8ed1b


From 2e37cfd8e0a0bb161a75ce2bc2302a1a1662fdb7 Mon Sep 17 00:00:00 2001
From: Peter Chen <peter.chen@freescale.com>
Date: Wed, 11 Feb 2015 12:44:51 +0800
Subject: usb: chipidea: clear otg interrupt status for otg capable controller

We need to do it for all otg capable controller, not only peripheral
featured otg capable controller, otherwise, the host-only role, but
otg capable controller may be responded by otg interrupt.

Signed-off-by: Peter Chen <peter.chen@freescale.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/chipidea/core.c | 9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)

(limited to 'drivers/usb')

diff --git a/drivers/usb/chipidea/core.c b/drivers/usb/chipidea/core.c
index 6d9dc2d175eb..23373543a149 100644
--- a/drivers/usb/chipidea/core.c
+++ b/drivers/usb/chipidea/core.c
@@ -649,8 +649,12 @@ static void ci_get_otg_capable(struct ci_hdrc *ci)
 		ci->is_otg = (hw_read(ci, CAP_DCCPARAMS,
 				DCCPARAMS_DC | DCCPARAMS_HC)
 					== (DCCPARAMS_DC | DCCPARAMS_HC));
-	if (ci->is_otg)
+	if (ci->is_otg) {
 		dev_dbg(ci->dev, "It is OTG capable controller\n");
+		/* Disable and clear all OTG irq */
+		hw_write_otgsc(ci, OTGSC_INT_EN_BITS | OTGSC_INT_STATUS_BITS,
+							OTGSC_INT_STATUS_BITS);
+	}
 }
 
 static int ci_hdrc_probe(struct platform_device *pdev)
@@ -749,9 +753,6 @@ static int ci_hdrc_probe(struct platform_device *pdev)
 	}
 
 	if (ci->is_otg && ci->roles[CI_ROLE_GADGET]) {
-		/* Disable and clear all OTG irq */
-		hw_write_otgsc(ci, OTGSC_INT_EN_BITS | OTGSC_INT_STATUS_BITS,
-							OTGSC_INT_STATUS_BITS);
 		ret = ci_hdrc_otg_init(ci);
 		if (ret) {
 			dev_err(dev, "init otg fails, ret = %d\n", ret);
-- 
cgit v1.2.3-59-g8ed1b


From 8721a752cc1bf61be0a0d3f266abd71a270d3a38 Mon Sep 17 00:00:00 2001
From: Peter Chen <peter.chen@freescale.com>
Date: Wed, 11 Feb 2015 12:44:53 +0800
Subject: usb: chipidea: usbmisc_imx: add imx6sx initialization routine

Except the same process with earlier imx6, it has below two features:

- Choose which vbus voltage as vbus wakeup source
We choose B_SESSION_VALID as vbus wakeup source since when the system
goes to suspend, the vbus comparator can't compare the vbus voltage
for VBUS_VALID.

- Disable dp/dm (linestate) change as wakeup source at device mode
when the vbus is not there, we don't expect dp/dm change waking up
usb controller at this situation.

Signed-off-by: Peter Chen <peter.chen@freescale.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/chipidea/usbmisc_imx.c | 47 ++++++++++++++++++++++++++++++++++++++
 1 file changed, 47 insertions(+)

(limited to 'drivers/usb')

diff --git a/drivers/usb/chipidea/usbmisc_imx.c b/drivers/usb/chipidea/usbmisc_imx.c
index 90b7d7f3c81b..8af070f15d3e 100644
--- a/drivers/usb/chipidea/usbmisc_imx.c
+++ b/drivers/usb/chipidea/usbmisc_imx.c
@@ -58,7 +58,16 @@
 #define MX6_BM_WAKEUP_ENABLE		BIT(10)
 #define MX6_BM_ID_WAKEUP		BIT(16)
 #define MX6_BM_VBUS_WAKEUP		BIT(17)
+#define MX6SX_BM_DPDM_WAKEUP_EN		BIT(29)
 #define MX6_BM_WAKEUP_INTR		BIT(31)
+#define MX6_USB_OTG1_PHY_CTRL		0x18
+/* For imx6dql, it is host-only controller, for later imx6, it is otg's */
+#define MX6_USB_OTG2_PHY_CTRL		0x1c
+#define MX6SX_USB_VBUS_WAKEUP_SOURCE(v)	(v << 8)
+#define MX6SX_USB_VBUS_WAKEUP_SOURCE_VBUS	MX6SX_USB_VBUS_WAKEUP_SOURCE(0)
+#define MX6SX_USB_VBUS_WAKEUP_SOURCE_AVALID	MX6SX_USB_VBUS_WAKEUP_SOURCE(1)
+#define MX6SX_USB_VBUS_WAKEUP_SOURCE_BVALID	MX6SX_USB_VBUS_WAKEUP_SOURCE(2)
+#define MX6SX_USB_VBUS_WAKEUP_SOURCE_SESS_END	MX6SX_USB_VBUS_WAKEUP_SOURCE(3)
 
 #define VF610_OVER_CUR_DIS		BIT(7)
 
@@ -259,6 +268,35 @@ static int usbmisc_imx6q_init(struct imx_usbmisc_data *data)
 	return 0;
 }
 
+static int usbmisc_imx6sx_init(struct imx_usbmisc_data *data)
+{
+	void __iomem *reg = NULL;
+	unsigned long flags;
+	struct imx_usbmisc *usbmisc = dev_get_drvdata(data->dev);
+	u32 val;
+	int ret = 0;
+
+	usbmisc_imx6q_init(data);
+
+	if (data->index == 0 || data->index == 1) {
+		reg = usbmisc->base + MX6_USB_OTG1_PHY_CTRL + data->index * 4;
+		spin_lock_irqsave(&usbmisc->lock, flags);
+		/* Set vbus wakeup source as bvalid */
+		val = readl(reg);
+		writel(val | MX6SX_USB_VBUS_WAKEUP_SOURCE_BVALID, reg);
+		/*
+		 * Disable dp/dm wakeup in device mode when vbus is
+		 * not there.
+		 */
+		val = readl(usbmisc->base + data->index * 4);
+		writel(val & ~MX6SX_BM_DPDM_WAKEUP_EN,
+			usbmisc->base + data->index * 4);
+		spin_unlock_irqrestore(&usbmisc->lock, flags);
+	}
+
+	return ret;
+}
+
 static int usbmisc_vf610_init(struct imx_usbmisc_data *data)
 {
 	struct imx_usbmisc *usbmisc = dev_get_drvdata(data->dev);
@@ -301,6 +339,11 @@ static const struct usbmisc_ops vf610_usbmisc_ops = {
 	.init = usbmisc_vf610_init,
 };
 
+static const struct usbmisc_ops imx6sx_usbmisc_ops = {
+	.set_wakeup = usbmisc_imx6q_set_wakeup,
+	.init = usbmisc_imx6sx_init,
+};
+
 int imx_usbmisc_init(struct imx_usbmisc_data *data)
 {
 	struct imx_usbmisc *usbmisc;
@@ -372,6 +415,10 @@ static const struct of_device_id usbmisc_imx_dt_ids[] = {
 		.compatible = "fsl,vf610-usbmisc",
 		.data = &vf610_usbmisc_ops,
 	},
+	{
+		.compatible = "fsl,imx6sx-usbmisc",
+		.data = &imx6sx_usbmisc_ops,
+	},
 	{ /* sentinel */ }
 };
 MODULE_DEVICE_TABLE(of, usbmisc_imx_dt_ids);
-- 
cgit v1.2.3-59-g8ed1b


From 655d32e9b2b2b912ff86de656eb620627b0df117 Mon Sep 17 00:00:00 2001
From: Peter Chen <peter.chen@freescale.com>
Date: Wed, 11 Feb 2015 12:44:54 +0800
Subject: usb: chipidea: add identification registers access APIs

Using hw_write_id_reg and hw_read_id_reg to write and read identification
registers contents, they can be used to get controller information, change
some system configurations, and so on.

Reviewed-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Peter Chen <peter.chen@freescale.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/chipidea/ci.h | 39 +++++++++++++++++++++++++++++++++++++++
 1 file changed, 39 insertions(+)

(limited to 'drivers/usb')

diff --git a/drivers/usb/chipidea/ci.h b/drivers/usb/chipidea/ci.h
index a0aeb8df9280..e53287aff916 100644
--- a/drivers/usb/chipidea/ci.h
+++ b/drivers/usb/chipidea/ci.h
@@ -29,6 +29,15 @@
 /******************************************************************************
  * REGISTERS
  *****************************************************************************/
+/* Identification Registers */
+#define ID_ID				0x0
+#define ID_HWGENERAL			0x4
+#define ID_HWHOST			0x8
+#define ID_HWDEVICE			0xc
+#define ID_HWTXBUF			0x10
+#define ID_HWRXBUF			0x14
+#define ID_SBUSCFG			0x90
+
 /* register indices */
 enum ci_hw_regs {
 	CAP_CAPLENGTH,
@@ -253,6 +262,36 @@ static inline void ci_role_stop(struct ci_hdrc *ci)
 	ci->roles[role]->stop(ci);
 }
 
+/**
+ * hw_read_id_reg: reads from a identification register
+ * @ci: the controller
+ * @offset: offset from the beginning of identification registers region
+ * @mask: bitfield mask
+ *
+ * This function returns register contents
+ */
+static inline u32 hw_read_id_reg(struct ci_hdrc *ci, u32 offset, u32 mask)
+{
+	return ioread32(ci->hw_bank.abs + offset) & mask;
+}
+
+/**
+ * hw_write_id_reg: writes to a identification register
+ * @ci: the controller
+ * @offset: offset from the beginning of identification registers region
+ * @mask: bitfield mask
+ * @data: new value
+ */
+static inline void hw_write_id_reg(struct ci_hdrc *ci, u32 offset,
+			    u32 mask, u32 data)
+{
+	if (~mask)
+		data = (ioread32(ci->hw_bank.abs + offset) & ~mask)
+			| (data & mask);
+
+	iowrite32(data, ci->hw_bank.abs + offset);
+}
+
 /**
  * hw_read: reads from a hw register
  * @ci: the controller
-- 
cgit v1.2.3-59-g8ed1b


From cb271f3ce969a0fc4ecf9fc4b5a28852509714ed Mon Sep 17 00:00:00 2001
From: Peter Chen <peter.chen@freescale.com>
Date: Wed, 11 Feb 2015 12:44:55 +0800
Subject: usb: chipidea: add chipidea revision information

Define ci_get_revision API to know the controller revision
information according to chipidea 1.1a, 2.0a and 2.5a spec.
Besides, add one entry at struct ci_hdrc to indicate revision
information, it can be used for adding different code for
revisions, eg kinds of errata.

Reviewed-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Peter Chen <peter.chen@freescale.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/chipidea/bits.h | 10 ++++++++++
 drivers/usb/chipidea/ci.h   | 14 ++++++++++++++
 drivers/usb/chipidea/core.c | 23 +++++++++++++++++++++--
 3 files changed, 45 insertions(+), 2 deletions(-)

(limited to 'drivers/usb')

diff --git a/drivers/usb/chipidea/bits.h b/drivers/usb/chipidea/bits.h
index ca57e3dcd3d5..e69424d6e423 100644
--- a/drivers/usb/chipidea/bits.h
+++ b/drivers/usb/chipidea/bits.h
@@ -15,6 +15,16 @@
 
 #include <linux/usb/ehci_def.h>
 
+/*
+ * ID
+ * For 1.x revision, bit24 - bit31 are reserved
+ * For 2.x revision, bit25 - bit28 are 0x2
+ */
+#define TAG		      (0x1F << 16)
+#define REVISION	      (0xF << 21)
+#define VERSION		      (0xF << 25)
+#define CIVERSION	      (0x7 << 29)
+
 /* HCCPARAMS */
 #define HCCPARAMS_LEN         BIT(17)
 
diff --git a/drivers/usb/chipidea/ci.h b/drivers/usb/chipidea/ci.h
index e53287aff916..c09381d4ca77 100644
--- a/drivers/usb/chipidea/ci.h
+++ b/drivers/usb/chipidea/ci.h
@@ -106,6 +106,18 @@ enum ci_role {
 	CI_ROLE_END,
 };
 
+enum ci_revision {
+	CI_REVISION_1X = 10,	/* Revision 1.x */
+	CI_REVISION_20 = 20, /* Revision 2.0 */
+	CI_REVISION_21, /* Revision 2.1 */
+	CI_REVISION_22, /* Revision 2.2 */
+	CI_REVISION_23, /* Revision 2.3 */
+	CI_REVISION_24, /* Revision 2.4 */
+	CI_REVISION_25, /* Revision 2.5 */
+	CI_REVISION_25_PLUS, /* Revision above than 2.5 */
+	CI_REVISION_UNKNOWN = 99, /* Unknown Revision */
+};
+
 /**
  * struct ci_role_driver - host/gadget role driver
  * @start: start this role
@@ -181,6 +193,7 @@ struct hw_bank {
  * @supports_runtime_pm: if runtime pm is supported
  * @in_lpm: if the core in low power mode
  * @wakeup_int: if wakeup interrupt occur
+ * @rev: The revision number for controller
  */
 struct ci_hdrc {
 	struct device			*dev;
@@ -226,6 +239,7 @@ struct ci_hdrc {
 	bool				supports_runtime_pm;
 	bool				in_lpm;
 	bool				wakeup_int;
+	enum ci_revision		rev;
 };
 
 static inline struct ci_role_driver *ci_role(struct ci_hdrc *ci)
diff --git a/drivers/usb/chipidea/core.c b/drivers/usb/chipidea/core.c
index 23373543a149..4b22d7cb6557 100644
--- a/drivers/usb/chipidea/core.c
+++ b/drivers/usb/chipidea/core.c
@@ -137,6 +137,22 @@ static int hw_alloc_regmap(struct ci_hdrc *ci, bool is_lpm)
 	return 0;
 }
 
+static enum ci_revision ci_get_revision(struct ci_hdrc *ci)
+{
+	int ver = hw_read_id_reg(ci, ID_ID, VERSION) >> __ffs(VERSION);
+	enum ci_revision rev = CI_REVISION_UNKNOWN;
+
+	if (ver == 0x2) {
+		rev = hw_read_id_reg(ci, ID_ID, REVISION)
+			>> __ffs(REVISION);
+		rev += CI_REVISION_20;
+	} else if (ver == 0x0) {
+		rev = CI_REVISION_1X;
+	}
+
+	return rev;
+}
+
 /**
  * hw_read_intr_enable: returns interrupt enable register
  *
@@ -251,8 +267,11 @@ static int hw_device_init(struct ci_hdrc *ci, void __iomem *base)
 	/* Clear all interrupts status bits*/
 	hw_write(ci, OP_USBSTS, 0xffffffff, 0xffffffff);
 
-	dev_dbg(ci->dev, "ChipIdea HDRC found, lpm: %d; cap: %p op: %p\n",
-		ci->hw_bank.lpm, ci->hw_bank.cap, ci->hw_bank.op);
+	ci->rev = ci_get_revision(ci);
+
+	dev_dbg(ci->dev,
+		"ChipIdea HDRC found, revision: %d, lpm: %d; cap: %p op: %p\n",
+		ci->rev, ci->hw_bank.lpm, ci->hw_bank.cap, ci->hw_bank.op);
 
 	/* setup lock mode ? */
 
-- 
cgit v1.2.3-59-g8ed1b


From 06bdfcdb139e95edbebeb719200de5d535afe526 Mon Sep 17 00:00:00 2001
From: Sanchayan Maity <maitysanchayan@gmail.com>
Date: Wed, 11 Feb 2015 12:44:56 +0800
Subject: usb: chipidea: Add errata for revision 2.40a

At chipidea revision 2.40a, there is a below errata:

9000531823  B2-Medium  Adding a dTD to a Primed Endpoint May Not Get Recognized

Title: Adding a dTD to a Primed Endpoint May Not Get Recognized

Impacted Configuration: All device mode configurations.

Description:
There is an issue with the add dTD tripwire semaphore (ATDTW bit in USBCMD register)
that can cause the controller to ignore a dTD that is added to a primed endpoint.
When this happens, the software can read the tripwire bit and the status bit at '1'
even though the endpoint is unprimed.

After executing a dTD, the device controller endpoint state machine executes a final
read of the dTD terminate bit to check if the application added a dTD to the linked
list at the last moment. This read is done in the finpkt_read_latest_next_td (44) state.
After the read is performed, if the terminate bit is still set, the state machine moves
to unprime the endpoint. The decision to unprime the endpoint is done in the
checkqh_decision (59) state, based on the value of the terminate bit.
Before reaching the checkqh_decision state, the state machine traverses the
writeqhtd_status (57), writeqh_status (56), and release_prime_mask (42) states.
As shown in the waveform, the ep_addtd_tripwire_clr signal is not set to clear
the tripwire bit in these states.

Workaround:
The software must implement a periodic poll cycle, and check for each dTD
pending on execution (Active = 1), if the enpoint is primed. It can do this by reading
the corresponding bits in the ENDPTPRIME and ENDPTSTAT registers. If these bits are
read at 0, the software needs to re-prime the endpoint by writing 1 to the corresponding
bit in the ENDPTPRIME register. This can be done for every microframe, every frame or
with a larger interval, depending on the urgency of transfer execution for the application.

Tested-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Peter Chen <peter.chen@freescale.com>
Signed-off-by: Sanchayan Maity <maitysanchayan@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/chipidea/udc.c | 20 ++++++++++++++++++++
 1 file changed, 20 insertions(+)

(limited to 'drivers/usb')

diff --git a/drivers/usb/chipidea/udc.c b/drivers/usb/chipidea/udc.c
index 52445428f254..4254792f56fc 100644
--- a/drivers/usb/chipidea/udc.c
+++ b/drivers/usb/chipidea/udc.c
@@ -522,6 +522,20 @@ static void free_pending_td(struct ci_hw_ep *hwep)
 	kfree(pending);
 }
 
+static int reprime_dtd(struct ci_hdrc *ci, struct ci_hw_ep *hwep,
+					   struct td_node *node)
+{
+	hwep->qh.ptr->td.next = node->dma;
+	hwep->qh.ptr->td.token &=
+		cpu_to_le32(~(TD_STATUS_HALTED | TD_STATUS_ACTIVE));
+
+	/* Synchronize before ep prime */
+	wmb();
+
+	return hw_ep_prime(ci, hwep->num, hwep->dir,
+				hwep->type == USB_ENDPOINT_XFER_CONTROL);
+}
+
 /**
  * _hardware_dequeue: handles a request at hardware level
  * @gadget: gadget
@@ -535,6 +549,7 @@ static int _hardware_dequeue(struct ci_hw_ep *hwep, struct ci_hw_req *hwreq)
 	struct td_node *node, *tmpnode;
 	unsigned remaining_length;
 	unsigned actual = hwreq->req.length;
+	struct ci_hdrc *ci = hwep->ci;
 
 	if (hwreq->req.status != -EALREADY)
 		return -EINVAL;
@@ -544,6 +559,11 @@ static int _hardware_dequeue(struct ci_hw_ep *hwep, struct ci_hw_req *hwreq)
 	list_for_each_entry_safe(node, tmpnode, &hwreq->tds, td) {
 		tmptoken = le32_to_cpu(node->ptr->token);
 		if ((TD_STATUS_ACTIVE & tmptoken) != 0) {
+			int n = hw_ep_bit(hwep->num, hwep->dir);
+
+			if (ci->rev == CI_REVISION_24)
+				if (!hw_read(ci, OP_ENDPTSTAT, BIT(n)))
+					reprime_dtd(ci, hwep, node);
 			hwreq->req.status = -EALREADY;
 			return -EBUSY;
 		}
-- 
cgit v1.2.3-59-g8ed1b


From 89200448a01d9d07a1ee5cc42e8b847f86cdaf7c Mon Sep 17 00:00:00 2001
From: Daniel Tang <dt.tangr@gmail.com>
Date: Wed, 11 Feb 2015 12:44:57 +0800
Subject: Chipidea: TI-NSPIRE USB OTG hardware does not support high speed and
 must connect at full speed

Signed-off-by: Daniel Tang <dt.tangr@gmail.com>
Signed-off-by: Peter Chen <peter.chen@freescale.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/chipidea/ci_hdrc_zevio.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/usb')

diff --git a/drivers/usb/chipidea/ci_hdrc_zevio.c b/drivers/usb/chipidea/ci_hdrc_zevio.c
index d976fc1db73a..1264de505527 100644
--- a/drivers/usb/chipidea/ci_hdrc_zevio.c
+++ b/drivers/usb/chipidea/ci_hdrc_zevio.c
@@ -18,7 +18,7 @@
 
 static struct ci_hdrc_platform_data ci_hdrc_zevio_platdata = {
 	.name			= "ci_hdrc_zevio",
-	.flags			= CI_HDRC_REGS_SHARED,
+	.flags			= CI_HDRC_REGS_SHARED | CI_HDRC_FORCE_FULLSPEED,
 	.capoffset		= DEF_CAPOFFSET,
 };
 
-- 
cgit v1.2.3-59-g8ed1b


From 905276c4319174d52de0e45fc9b22f599497be47 Mon Sep 17 00:00:00 2001
From: Daniel Tang <dt.tangr@gmail.com>
Date: Wed, 11 Feb 2015 12:44:58 +0800
Subject: Chipidea: Set connect-at-fullspeed bit when entering host mode if
 CI_HDRC_FORCE_FULLSPEED is set in the platform data

PORTSC_PFSC is not set on entering host mode which means the USB OTG
controller will attempt to enumerate USB devices at high speed even when the
CI_HDRC_FORCE_FULLSPEED flag is set in the platform data.

This patch ensures it is set right before host mode operations begin if needed.

Signed-off-by: Daniel Tang <dt.tangr@gmail.com>
Signed-off-by: Peter Chen <peter.chen@freescale.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/chipidea/host.c | 3 +++
 1 file changed, 3 insertions(+)

(limited to 'drivers/usb')

diff --git a/drivers/usb/chipidea/host.c b/drivers/usb/chipidea/host.c
index 48731d0bab35..12edbd0c998a 100644
--- a/drivers/usb/chipidea/host.c
+++ b/drivers/usb/chipidea/host.c
@@ -133,6 +133,9 @@ static int host_start(struct ci_hdrc *ci)
 	if (ci->platdata->flags & CI_HDRC_DISABLE_STREAMING)
 		hw_write(ci, OP_USBMODE, USBMODE_CI_SDIS, USBMODE_CI_SDIS);
 
+	if (ci->platdata->flags & CI_HDRC_FORCE_FULLSPEED)
+		hw_write(ci, OP_PORTSC, PORTSC_PFSC, PORTSC_PFSC);
+
 	return ret;
 
 put_hcd:
-- 
cgit v1.2.3-59-g8ed1b


From 78f0357ec8baa1ffe9c14b81f88cb0f3a5e1c15a Mon Sep 17 00:00:00 2001
From: Peter Chen <peter.chen@freescale.com>
Date: Wed, 11 Feb 2015 12:44:59 +0800
Subject: usb: chipidea: host: add .bus_suspend quirk

For chipidea, its resume sequence is not-EHCI compatible, see
below description for FPR at portsc. So in order to send SoF in
time for remote wakeup sequence(within 3ms), the RUN/STOP bit must
be set before the resume signal is ended, but the usb resume
code may run after resume signal is ended, so we had to set it
at suspend path.

Force Port Resume - RW. Default = 0b.
1= Resume detected/driven on port.
0=No resume (K-state) detected/driven on port.
Host mode:
Software sets this bit to one to drive resume signaling. The Controller sets this bit to '1' if
a J-to-K transition is detected while the port is in the Suspend state. When this bit
transitions to a '1' because a J-to-K transition is detected, the Port Change Detect bit in
the USBSTS register is also set to '1'. This bit will automatically change to '0' after the
resume sequence is complete. This behavior is different from EHCI where the controller
driver is required to set this bit to a '0' after the resume duration is timed in the driver.
Note that when the controller owns the port, the resume sequence follows the defined

sequence documented in the USB Specification Revision 2.0. The resume signaling
(Full-speed 'K') is driven on the port as long as this bit remains a '1'. This bit will remain
a '1' until the port has switched to idle. Writing a '0' has no affect because the port
controller will time the resume operation, clear the bit and the port control state switches
to HS or FS idle.
This field is '0' if Port Power(PP) is '0' in host mode.

This bit is not-EHCI compatible.

Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Peter Chen <peter.chen@freescale.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/chipidea/host.c | 44 ++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 44 insertions(+)

(limited to 'drivers/usb')

diff --git a/drivers/usb/chipidea/host.c b/drivers/usb/chipidea/host.c
index 12edbd0c998a..feb9f0735227 100644
--- a/drivers/usb/chipidea/host.c
+++ b/drivers/usb/chipidea/host.c
@@ -33,6 +33,7 @@
 #include "host.h"
 
 static struct hc_driver __read_mostly ci_ehci_hc_driver;
+static int (*orig_bus_suspend)(struct usb_hcd *hcd);
 
 struct ehci_ci_priv {
 	struct regulator *reg_vbus;
@@ -161,6 +162,47 @@ void ci_hdrc_host_destroy(struct ci_hdrc *ci)
 		host_stop(ci);
 }
 
+static int ci_ehci_bus_suspend(struct usb_hcd *hcd)
+{
+	struct ehci_hcd *ehci = hcd_to_ehci(hcd);
+	int port;
+	u32 tmp;
+
+	int ret = orig_bus_suspend(hcd);
+
+	if (ret)
+		return ret;
+
+	port = HCS_N_PORTS(ehci->hcs_params);
+	while (port--) {
+		u32 __iomem *reg = &ehci->regs->port_status[port];
+		u32 portsc = ehci_readl(ehci, reg);
+
+		if (portsc & PORT_CONNECT) {
+			/*
+			 * For chipidea, the resume signal will be ended
+			 * automatically, so for remote wakeup case, the
+			 * usbcmd.rs may not be set before the resume has
+			 * ended if other resume paths consumes too much
+			 * time (~24ms), in that case, the SOF will not
+			 * send out within 3ms after resume ends, then the
+			 * high speed device will enter full speed mode.
+			 */
+
+			tmp = ehci_readl(ehci, &ehci->regs->command);
+			tmp |= CMD_RUN;
+			ehci_writel(ehci, tmp, &ehci->regs->command);
+			/*
+			 * It needs a short delay between set RS bit and PHCD.
+			 */
+			usleep_range(150, 200);
+			break;
+		}
+	}
+
+	return 0;
+}
+
 int ci_hdrc_host_init(struct ci_hdrc *ci)
 {
 	struct ci_role_driver *rdrv;
@@ -179,6 +221,8 @@ int ci_hdrc_host_init(struct ci_hdrc *ci)
 	ci->roles[CI_ROLE_HOST] = rdrv;
 
 	ehci_init_driver(&ci_ehci_hc_driver, &ehci_ci_overrides);
+	orig_bus_suspend = ci_ehci_hc_driver.bus_suspend;
+	ci_ehci_hc_driver.bus_suspend = ci_ehci_bus_suspend;
 
 	return 0;
 }
-- 
cgit v1.2.3-59-g8ed1b


From ba1aff67f99a219b0c56bf7f10cea2c41cbd0583 Mon Sep 17 00:00:00 2001
From: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Date: Wed, 11 Feb 2015 12:45:00 +0800
Subject: chipidea: pci: register nop PHY

Since PHY for ChipIdea is optional (not all SoCs having PHY for ChipIdea should
be programmed), we register 'nop' PHY for platforms that do not have
programmable PHY.

Acked-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Peter Chen <peter.chen@freescale.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/chipidea/ci_hdrc_pci.c | 31 ++++++++++++++++++++++++-------
 1 file changed, 24 insertions(+), 7 deletions(-)

(limited to 'drivers/usb')

diff --git a/drivers/usb/chipidea/ci_hdrc_pci.c b/drivers/usb/chipidea/ci_hdrc_pci.c
index 4df669437211..773d150512fa 100644
--- a/drivers/usb/chipidea/ci_hdrc_pci.c
+++ b/drivers/usb/chipidea/ci_hdrc_pci.c
@@ -16,10 +16,16 @@
 #include <linux/interrupt.h>
 #include <linux/usb/gadget.h>
 #include <linux/usb/chipidea.h>
+#include <linux/usb/usb_phy_generic.h>
 
 /* driver name */
 #define UDC_DRIVER_NAME   "ci_hdrc_pci"
 
+struct ci_hdrc_pci {
+	struct platform_device	*ci;
+	struct platform_device	*phy;
+};
+
 /******************************************************************************
  * PCI block
  *****************************************************************************/
@@ -52,7 +58,7 @@ static int ci_hdrc_pci_probe(struct pci_dev *pdev,
 				       const struct pci_device_id *id)
 {
 	struct ci_hdrc_platform_data *platdata = (void *)id->driver_data;
-	struct platform_device *plat_ci;
+	struct ci_hdrc_pci *ci;
 	struct resource res[3];
 	int retval = 0, nres = 2;
 
@@ -61,6 +67,10 @@ static int ci_hdrc_pci_probe(struct pci_dev *pdev,
 		return -ENODEV;
 	}
 
+	ci = devm_kzalloc(&pdev->dev, sizeof(*ci), GFP_KERNEL);
+	if (!ci)
+		return -ENOMEM;
+
 	retval = pcim_enable_device(pdev);
 	if (retval)
 		return retval;
@@ -73,6 +83,11 @@ static int ci_hdrc_pci_probe(struct pci_dev *pdev,
 	pci_set_master(pdev);
 	pci_try_set_mwi(pdev);
 
+	/* register a nop PHY */
+	ci->phy = usb_phy_generic_register();
+	if (!ci->phy)
+		return -ENOMEM;
+
 	memset(res, 0, sizeof(res));
 	res[0].start	= pci_resource_start(pdev, 0);
 	res[0].end	= pci_resource_end(pdev, 0);
@@ -80,13 +95,14 @@ static int ci_hdrc_pci_probe(struct pci_dev *pdev,
 	res[1].start	= pdev->irq;
 	res[1].flags	= IORESOURCE_IRQ;
 
-	plat_ci = ci_hdrc_add_device(&pdev->dev, res, nres, platdata);
-	if (IS_ERR(plat_ci)) {
+	ci->ci = ci_hdrc_add_device(&pdev->dev, res, nres, platdata);
+	if (IS_ERR(ci->ci)) {
 		dev_err(&pdev->dev, "ci_hdrc_add_device failed!\n");
-		return PTR_ERR(plat_ci);
+		usb_phy_generic_unregister(ci->phy);
+		return PTR_ERR(ci->ci);
 	}
 
-	pci_set_drvdata(pdev, plat_ci);
+	pci_set_drvdata(pdev, ci);
 
 	return 0;
 }
@@ -101,9 +117,10 @@ static int ci_hdrc_pci_probe(struct pci_dev *pdev,
  */
 static void ci_hdrc_pci_remove(struct pci_dev *pdev)
 {
-	struct platform_device *plat_ci = pci_get_drvdata(pdev);
+	struct ci_hdrc_pci *ci = pci_get_drvdata(pdev);
 
-	ci_hdrc_remove_device(plat_ci);
+	ci_hdrc_remove_device(ci->ci);
+	usb_phy_generic_unregister(ci->phy);
 }
 
 /**
-- 
cgit v1.2.3-59-g8ed1b


From 6adb9b7b5fb64be3c3e4d57578ea1446da91a8f9 Mon Sep 17 00:00:00 2001
From: Li Jun <b47624@freescale.com>
Date: Wed, 11 Feb 2015 12:45:01 +0800
Subject: usb: chipidea: add a flag for turn on vbus early for host

Some usb PHYs need power supply from vbus to make it work, eg mxs-phy, if
there is no vbus, USB PHY will not in correct state when the controller starts
to work, for host, this requires vbus should be turned on before setting port
power(PP) of ehci, to work with this kind of USB PHY design, this patch adds
a flag CI_HDRC_TURN_VBUS_EARLY_ON, can be checked by host driver to turn on
vbus while start host.

Signed-off-by: Li Jun <jun.li@freescale.com>
Signed-off-by: Peter Chen <peter.chen@freescale.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/chipidea/ci_hdrc_imx.c | 12 ++++++++----
 include/linux/usb/chipidea.h       |  1 +
 2 files changed, 9 insertions(+), 4 deletions(-)

(limited to 'drivers/usb')

diff --git a/drivers/usb/chipidea/ci_hdrc_imx.c b/drivers/usb/chipidea/ci_hdrc_imx.c
index f7f9fd45c9ea..389f0e034259 100644
--- a/drivers/usb/chipidea/ci_hdrc_imx.c
+++ b/drivers/usb/chipidea/ci_hdrc_imx.c
@@ -32,19 +32,23 @@ static const struct ci_hdrc_imx_platform_flag imx27_usb_data = {
 };
 
 static const struct ci_hdrc_imx_platform_flag imx28_usb_data = {
-	.flags = CI_HDRC_IMX28_WRITE_FIX,
+	.flags = CI_HDRC_IMX28_WRITE_FIX |
+		CI_HDRC_TURN_VBUS_EARLY_ON,
 };
 
 static const struct ci_hdrc_imx_platform_flag imx6q_usb_data = {
-	.flags = CI_HDRC_SUPPORTS_RUNTIME_PM,
+	.flags = CI_HDRC_SUPPORTS_RUNTIME_PM |
+		CI_HDRC_TURN_VBUS_EARLY_ON,
 };
 
 static const struct ci_hdrc_imx_platform_flag imx6sl_usb_data = {
-	.flags = CI_HDRC_SUPPORTS_RUNTIME_PM,
+	.flags = CI_HDRC_SUPPORTS_RUNTIME_PM |
+		CI_HDRC_TURN_VBUS_EARLY_ON,
 };
 
 static const struct ci_hdrc_imx_platform_flag imx6sx_usb_data = {
-	.flags = CI_HDRC_SUPPORTS_RUNTIME_PM,
+	.flags = CI_HDRC_SUPPORTS_RUNTIME_PM |
+		CI_HDRC_TURN_VBUS_EARLY_ON,
 };
 
 static const struct of_device_id ci_hdrc_imx_dt_ids[] = {
diff --git a/include/linux/usb/chipidea.h b/include/linux/usb/chipidea.h
index 39ba00f0d1d5..ab94f78c4dd1 100644
--- a/include/linux/usb/chipidea.h
+++ b/include/linux/usb/chipidea.h
@@ -28,6 +28,7 @@ struct ci_hdrc_platform_data {
 #define CI_HDRC_DUAL_ROLE_NOT_OTG	BIT(4)
 #define CI_HDRC_IMX28_WRITE_FIX		BIT(5)
 #define CI_HDRC_FORCE_FULLSPEED		BIT(6)
+#define CI_HDRC_TURN_VBUS_EARLY_ON	BIT(7)
 	enum usb_dr_mode	dr_mode;
 #define CI_HDRC_CONTROLLER_RESET_EVENT		0
 #define CI_HDRC_CONTROLLER_STOPPED_EVENT	1
-- 
cgit v1.2.3-59-g8ed1b


From 6594591741883e004aaba105951337878698b054 Mon Sep 17 00:00:00 2001
From: Li Jun <b47624@freescale.com>
Date: Wed, 11 Feb 2015 12:45:02 +0800
Subject: usb: chipidea: host: turn on vbus before add hcd if early vbus on is
 required

If CI_HDRC_TURN_VBUS_EARLY_ON is set, turn on vbus before adding hcd, so it
will not set reg_vbus of ehci_ci_priv, then vbus will not be handled by ehci core.

Signed-off-by: Li Jun <jun.li@freescale.com>
Signed-off-by: Peter Chen <peter.chen@freescale.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/chipidea/host.c | 27 ++++++++++++++++++++++-----
 1 file changed, 22 insertions(+), 5 deletions(-)

(limited to 'drivers/usb')

diff --git a/drivers/usb/chipidea/host.c b/drivers/usb/chipidea/host.c
index feb9f0735227..21fe1a314313 100644
--- a/drivers/usb/chipidea/host.c
+++ b/drivers/usb/chipidea/host.c
@@ -44,11 +44,10 @@ static int ehci_ci_portpower(struct usb_hcd *hcd, int portnum, bool enable)
 	struct ehci_hcd *ehci = hcd_to_ehci(hcd);
 	struct ehci_ci_priv *priv = (struct ehci_ci_priv *)ehci->priv;
 	struct device *dev = hcd->self.controller;
-	struct ci_hdrc *ci = dev_get_drvdata(dev);
 	int ret = 0;
 	int port = HCS_N_PORTS(ehci->hcs_params);
 
-	if (priv->reg_vbus && !ci_otg_is_fsm_mode(ci)) {
+	if (priv->reg_vbus) {
 		if (port > 1) {
 			dev_warn(dev,
 				"Not support multi-port regulator control\n");
@@ -114,12 +113,23 @@ static int host_start(struct ci_hdrc *ci)
 	priv = (struct ehci_ci_priv *)ehci->priv;
 	priv->reg_vbus = NULL;
 
-	if (ci->platdata->reg_vbus)
-		priv->reg_vbus = ci->platdata->reg_vbus;
+	if (ci->platdata->reg_vbus && !ci_otg_is_fsm_mode(ci)) {
+		if (ci->platdata->flags & CI_HDRC_TURN_VBUS_EARLY_ON) {
+			ret = regulator_enable(ci->platdata->reg_vbus);
+			if (ret) {
+				dev_err(ci->dev,
+				"Failed to enable vbus regulator, ret=%d\n",
+									ret);
+				goto put_hcd;
+			}
+		} else {
+			priv->reg_vbus = ci->platdata->reg_vbus;
+		}
+	}
 
 	ret = usb_add_hcd(hcd, 0, 0);
 	if (ret) {
-		goto put_hcd;
+		goto disable_reg;
 	} else {
 		struct usb_otg *otg = &ci->otg;
 
@@ -139,6 +149,10 @@ static int host_start(struct ci_hdrc *ci)
 
 	return ret;
 
+disable_reg:
+	if (ci->platdata->reg_vbus && !ci_otg_is_fsm_mode(ci) &&
+			(ci->platdata->flags & CI_HDRC_TURN_VBUS_EARLY_ON))
+		regulator_disable(ci->platdata->reg_vbus);
 put_hcd:
 	usb_put_hcd(hcd);
 
@@ -152,6 +166,9 @@ static void host_stop(struct ci_hdrc *ci)
 	if (hcd) {
 		usb_remove_hcd(hcd);
 		usb_put_hcd(hcd);
+		if (ci->platdata->reg_vbus && !ci_otg_is_fsm_mode(ci) &&
+			(ci->platdata->flags & CI_HDRC_TURN_VBUS_EARLY_ON))
+				regulator_disable(ci->platdata->reg_vbus);
 	}
 }
 
-- 
cgit v1.2.3-59-g8ed1b


From 961ea496facda611eeb153d8133a4d40055e56ca Mon Sep 17 00:00:00 2001
From: Li Jun <b47624@freescale.com>
Date: Wed, 11 Feb 2015 12:45:03 +0800
Subject: usb: chipidea: support runtime power management for otg fsm mode

This patch adds runtime power management support for otg fsm mode, since
A-device in a_idle state cannot detect data pulse irq after suspended, here
enable wakeup by connection before suspend to make it can be resumed by DP;
and handle wakeup from that state like SRP.

Signed-off-by: Li Jun <jun.li@freescale.com>
Signed-off-by: Peter Chen <peter.chen@freescale.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/chipidea/bits.h    |  1 +
 drivers/usb/chipidea/core.c    | 43 ++++++++++++++++++++++++++++++++++++++----
 drivers/usb/chipidea/otg_fsm.c | 22 ++++++++++++++++++---
 3 files changed, 59 insertions(+), 7 deletions(-)

(limited to 'drivers/usb')

diff --git a/drivers/usb/chipidea/bits.h b/drivers/usb/chipidea/bits.h
index e69424d6e423..3cb9bda51ddf 100644
--- a/drivers/usb/chipidea/bits.h
+++ b/drivers/usb/chipidea/bits.h
@@ -63,6 +63,7 @@
 #define PORTSC_HSP            BIT(9)
 #define PORTSC_PP             BIT(12)
 #define PORTSC_PTC            (0x0FUL << 16)
+#define PORTSC_WKCN           BIT(20)
 #define PORTSC_PHCD(d)	      ((d) ? BIT(22) : BIT(23))
 /* PTS and PTW for non lpm version only */
 #define PORTSC_PFSC           BIT(24)
diff --git a/drivers/usb/chipidea/core.c b/drivers/usb/chipidea/core.c
index 4b22d7cb6557..74fea4fa41b1 100644
--- a/drivers/usb/chipidea/core.c
+++ b/drivers/usb/chipidea/core.c
@@ -798,11 +798,11 @@ static int ci_hdrc_probe(struct platform_device *pdev)
 			: CI_ROLE_GADGET;
 	}
 
-	/* only update vbus status for peripheral */
-	if (ci->role == CI_ROLE_GADGET)
-		ci_handle_vbus_change(ci);
-
 	if (!ci_otg_is_fsm_mode(ci)) {
+		/* only update vbus status for peripheral */
+		if (ci->role == CI_ROLE_GADGET)
+			ci_handle_vbus_change(ci);
+
 		ret = ci_role_start(ci, ci->role);
 		if (ret) {
 			dev_err(dev, "can't start %s role\n",
@@ -861,6 +861,33 @@ static int ci_hdrc_remove(struct platform_device *pdev)
 }
 
 #ifdef CONFIG_PM
+/* Prepare wakeup by SRP before suspend */
+static void ci_otg_fsm_suspend_for_srp(struct ci_hdrc *ci)
+{
+	if ((ci->fsm.otg->state == OTG_STATE_A_IDLE) &&
+				!hw_read_otgsc(ci, OTGSC_ID)) {
+		hw_write(ci, OP_PORTSC, PORTSC_W1C_BITS | PORTSC_PP,
+								PORTSC_PP);
+		hw_write(ci, OP_PORTSC, PORTSC_W1C_BITS | PORTSC_WKCN,
+								PORTSC_WKCN);
+	}
+}
+
+/* Handle SRP when wakeup by data pulse */
+static void ci_otg_fsm_wakeup_by_srp(struct ci_hdrc *ci)
+{
+	if ((ci->fsm.otg->state == OTG_STATE_A_IDLE) &&
+		(ci->fsm.a_bus_drop == 1) && (ci->fsm.a_bus_req == 0)) {
+		if (!hw_read_otgsc(ci, OTGSC_ID)) {
+			ci->fsm.a_srp_det = 1;
+			ci->fsm.a_bus_drop = 0;
+		} else {
+			ci->fsm.id = 1;
+		}
+		ci_otg_queue_work(ci);
+	}
+}
+
 static void ci_controller_suspend(struct ci_hdrc *ci)
 {
 	disable_irq(ci->irq);
@@ -894,6 +921,8 @@ static int ci_controller_resume(struct device *dev)
 		pm_runtime_mark_last_busy(ci->dev);
 		pm_runtime_put_autosuspend(ci->dev);
 		enable_irq(ci->irq);
+		if (ci_otg_is_fsm_mode(ci))
+			ci_otg_fsm_wakeup_by_srp(ci);
 	}
 
 	return 0;
@@ -921,6 +950,9 @@ static int ci_suspend(struct device *dev)
 	}
 
 	if (device_may_wakeup(dev)) {
+		if (ci_otg_is_fsm_mode(ci))
+			ci_otg_fsm_suspend_for_srp(ci);
+
 		usb_phy_set_wakeup(ci->usb_phy, true);
 		enable_irq_wake(ci->irq);
 	}
@@ -963,6 +995,9 @@ static int ci_runtime_suspend(struct device *dev)
 		return 0;
 	}
 
+	if (ci_otg_is_fsm_mode(ci))
+		ci_otg_fsm_suspend_for_srp(ci);
+
 	usb_phy_set_wakeup(ci->usb_phy, true);
 	ci_controller_suspend(ci);
 
diff --git a/drivers/usb/chipidea/otg_fsm.c b/drivers/usb/chipidea/otg_fsm.c
index 562e581f6765..e3cf5be66d3d 100644
--- a/drivers/usb/chipidea/otg_fsm.c
+++ b/drivers/usb/chipidea/otg_fsm.c
@@ -225,6 +225,9 @@ static void ci_otg_add_timer(struct ci_hdrc *ci, enum ci_otg_fsm_timer_index t)
 			return;
 		}
 
+	if (list_empty(active_timers))
+		pm_runtime_get(ci->dev);
+
 	timer->count = timer->expires;
 	list_add_tail(&timer->list, active_timers);
 
@@ -241,17 +244,22 @@ static void ci_otg_del_timer(struct ci_hdrc *ci, enum ci_otg_fsm_timer_index t)
 	struct ci_otg_fsm_timer *tmp_timer, *del_tmp;
 	struct ci_otg_fsm_timer *timer = ci->fsm_timer->timer_list[t];
 	struct list_head *active_timers = &ci->fsm_timer->active_timers;
+	int flag = 0;
 
 	if (t >= NUM_CI_OTG_FSM_TIMERS)
 		return;
 
 	list_for_each_entry_safe(tmp_timer, del_tmp, active_timers, list)
-		if (tmp_timer == timer)
+		if (tmp_timer == timer) {
 			list_del(&timer->list);
+			flag = 1;
+		}
 
 	/* Disable 1ms irq if there is no any active timer */
-	if (list_empty(active_timers))
+	if (list_empty(active_timers) && (flag == 1)) {
 		hw_write_otgsc(ci, OTGSC_1MSIE, 0);
+		pm_runtime_put(ci->dev);
+	}
 }
 
 /*
@@ -275,8 +283,10 @@ static inline int ci_otg_tick_timer(struct ci_hdrc *ci)
 	}
 
 	/* disable 1ms irq if there is no any timer active */
-	if ((expired == 1) && list_empty(active_timers))
+	if ((expired == 1) && list_empty(active_timers)) {
 		hw_write_otgsc(ci, OTGSC_1MSIE, 0);
+		pm_runtime_put(ci->dev);
+	}
 
 	return expired;
 }
@@ -585,6 +595,7 @@ int ci_otg_fsm_work(struct ci_hdrc *ci)
 		ci->fsm.otg->state < OTG_STATE_A_IDLE)
 		return 0;
 
+	pm_runtime_get_sync(ci->dev);
 	if (otg_statemachine(&ci->fsm)) {
 		if (ci->fsm.otg->state == OTG_STATE_A_IDLE) {
 			/*
@@ -609,8 +620,13 @@ int ci_otg_fsm_work(struct ci_hdrc *ci)
 				 */
 				ci_otg_queue_work(ci);
 			}
+		} else if (ci->fsm.otg->state == OTG_STATE_A_HOST) {
+			pm_runtime_mark_last_busy(ci->dev);
+			pm_runtime_put_autosuspend(ci->dev);
+			return 0;
 		}
 	}
+	pm_runtime_put_sync(ci->dev);
 	return 0;
 }
 
-- 
cgit v1.2.3-59-g8ed1b


From 1dc6120ef7f003305d99ef12f598a6b05eacc38c Mon Sep 17 00:00:00 2001
From: "Lad, Prabhakar" <prabhakar.csengg@gmail.com>
Date: Wed, 4 Feb 2015 18:05:13 +0000
Subject: usb: host/sl811-hcd: fix sparse warning

this patch fixes following sparse warning:
sl811-hcd.c:1804:24: warning: symbol 'sl811h_driver' was not declared. Should it be static?

Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/host/sl811-hcd.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/usb')

diff --git a/drivers/usb/host/sl811-hcd.c b/drivers/usb/host/sl811-hcd.c
index 4f4ba1ea9e9b..aceddfdd166d 100644
--- a/drivers/usb/host/sl811-hcd.c
+++ b/drivers/usb/host/sl811-hcd.c
@@ -1801,7 +1801,7 @@ sl811h_resume(struct platform_device *dev)
 
 
 /* this driver is exported so sl811_cs can depend on it */
-struct platform_driver sl811h_driver = {
+static struct platform_driver sl811h_driver = {
 	.probe =	sl811h_probe,
 	.remove =	sl811h_remove,
 
-- 
cgit v1.2.3-59-g8ed1b


From 9751afbbb02d7a1c0f57191b8423948344a7ed86 Mon Sep 17 00:00:00 2001
From: Nicholas Mc Guire <hofrat@osadl.org>
Date: Fri, 6 Feb 2015 04:50:21 -0500
Subject: USB: image: use msecs_to_jiffies for time conversion

This is only an API consolidation and should make things more readable
it replaces var * HZ / 1000 by msecs_to_jiffies(var).

Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/image/mdc800.c | 11 +++++++----
 1 file changed, 7 insertions(+), 4 deletions(-)

(limited to 'drivers/usb')

diff --git a/drivers/usb/image/mdc800.c b/drivers/usb/image/mdc800.c
index a62865af53cc..5cf2633cdb04 100644
--- a/drivers/usb/image/mdc800.c
+++ b/drivers/usb/image/mdc800.c
@@ -347,7 +347,8 @@ static int mdc800_usb_waitForIRQ (int mode, int msec)
 {
 	mdc800->camera_request_ready=1+mode;
 
-	wait_event_timeout(mdc800->irq_wait, mdc800->irq_woken, msec*HZ/1000);
+	wait_event_timeout(mdc800->irq_wait, mdc800->irq_woken,
+			   msecs_to_jiffies(msec));
 	mdc800->irq_woken = 0;
 
 	if (mdc800->camera_request_ready>0)
@@ -743,8 +744,9 @@ static ssize_t mdc800_device_read (struct file *file, char __user *buf, size_t l
 					mutex_unlock(&mdc800->io_lock);
 					return len-left;
 				}
-				wait_event_timeout(mdc800->download_wait, mdc800->downloaded,
-										TO_DOWNLOAD_GET_READY*HZ/1000);
+				wait_event_timeout(mdc800->download_wait,
+				     mdc800->downloaded,
+				     msecs_to_jiffies(TO_DOWNLOAD_GET_READY));
 				mdc800->downloaded = 0;
 				if (mdc800->download_urb->status != 0)
 				{
@@ -867,7 +869,8 @@ static ssize_t mdc800_device_write (struct file *file, const char __user *buf, s
 				mutex_unlock(&mdc800->io_lock);
 				return -EIO;
 			}
-			wait_event_timeout(mdc800->write_wait, mdc800->written, TO_WRITE_GET_READY*HZ/1000);
+			wait_event_timeout(mdc800->write_wait, mdc800->written,
+					msecs_to_jiffies(TO_WRITE_GET_READY));
 			mdc800->written = 0;
 			if (mdc800->state == WORKING)
 			{
-- 
cgit v1.2.3-59-g8ed1b


From 8f7e9473ab62139c78eb834f53c4ec6bc22d111f Mon Sep 17 00:00:00 2001
From: Nicholas Mc Guire <hofrat@osadl.org>
Date: Fri, 6 Feb 2015 04:58:31 -0500
Subject: USB: legotower: use msecs_to_jiffies for time conversion

This is only an API consolidation and should make things more readable
it replaces var * HZ / 1000 by msecs_to_jiffies(var).

Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/misc/legousbtower.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

(limited to 'drivers/usb')

diff --git a/drivers/usb/misc/legousbtower.c b/drivers/usb/misc/legousbtower.c
index 97cd9e24bd25..7771be3ac178 100644
--- a/drivers/usb/misc/legousbtower.c
+++ b/drivers/usb/misc/legousbtower.c
@@ -574,7 +574,7 @@ static ssize_t tower_read (struct file *file, char __user *buffer, size_t count,
 	}
 
 	if (read_timeout) {
-		timeout = jiffies + read_timeout * HZ / 1000;
+		timeout = jiffies + msecs_to_jiffies(read_timeout);
 	}
 
 	/* wait for data */
@@ -592,7 +592,7 @@ static ssize_t tower_read (struct file *file, char __user *buffer, size_t count,
 		/* reset read timeout during read or write activity */
 		if (read_timeout
 		    && (dev->read_buffer_length || dev->interrupt_out_busy)) {
-			timeout = jiffies + read_timeout * HZ / 1000;
+			timeout = jiffies + msecs_to_jiffies(read_timeout);
 		}
 		/* check for read timeout */
 		if (read_timeout && time_after (jiffies, timeout)) {
@@ -831,7 +831,7 @@ static int tower_probe (struct usb_interface *interface, const struct usb_device
 	dev->read_buffer_length = 0;
 	dev->read_packet_length = 0;
 	spin_lock_init (&dev->read_buffer_lock);
-	dev->packet_timeout_jiffies = packet_timeout * HZ / 1000;
+	dev->packet_timeout_jiffies = msecs_to_jiffies(packet_timeout);
 	dev->read_last_arrival = jiffies;
 
 	init_waitqueue_head (&dev->read_wait);
-- 
cgit v1.2.3-59-g8ed1b


From e5401bf37a69620bdf079e4ee6c30a268f06f04b Mon Sep 17 00:00:00 2001
From: Lin Wang <lin.x.wang@intel.com>
Date: Tue, 17 Mar 2015 18:32:21 +0200
Subject: xhci: unify cycle state toggling operation with 'XOR'

Some toggling operation in xHCI driver still use conditional toggling:
ring->cycle_state = (ring->cycle_state ? 0 : 1);

Use XOR to invert the cycle state instead of a conditional toggle to unify
cycle state toggling operation in xHCI driver.

Signed-off-by: Lin Wang <lin.x.wang@intel.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/host/xhci-ring.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'drivers/usb')

diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
index 5fb66db89e05..da2ff5097fcf 100644
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -238,7 +238,7 @@ static void inc_enq(struct xhci_hcd *xhci, struct xhci_ring *ring,
 
 			/* Toggle the cycle bit after the last ring segment. */
 			if (last_trb_on_last_seg(xhci, ring, ring->enq_seg, next)) {
-				ring->cycle_state = (ring->cycle_state ? 0 : 1);
+				ring->cycle_state ^= 1;
 			}
 		}
 		ring->enq_seg = ring->enq_seg->next;
@@ -2809,7 +2809,7 @@ static int prepare_ring(struct xhci_hcd *xhci, struct xhci_ring *ep_ring,
 
 			/* Toggle the cycle bit after the last ring segment. */
 			if (last_trb_on_last_seg(xhci, ring, ring->enq_seg, next)) {
-				ring->cycle_state = (ring->cycle_state ? 0 : 1);
+				ring->cycle_state ^= 1;
 			}
 			ring->enq_seg = ring->enq_seg->next;
 			ring->enqueue = ring->enq_seg->trbs;
-- 
cgit v1.2.3-59-g8ed1b


From 7b8ef22ea547b80475ac7feab06fb15e0fc143d8 Mon Sep 17 00:00:00 2001
From: Maxime Ripard <maxime.ripard@free-electrons.com>
Date: Tue, 17 Mar 2015 18:32:22 +0200
Subject: usb: xhci: plat: Add USB phy support

The Marvell Armada 385 AP needs a dumb phy in order to enable the USB3 VBUS.

Add a call to retrieve a USB PHY to XHCI plat in order to support this.

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/host/xhci-plat.c | 19 ++++++++++++++++++-
 1 file changed, 18 insertions(+), 1 deletion(-)

(limited to 'drivers/usb')

diff --git a/drivers/usb/host/xhci-plat.c b/drivers/usb/host/xhci-plat.c
index 0e11d61408ff..783e819139a7 100644
--- a/drivers/usb/host/xhci-plat.c
+++ b/drivers/usb/host/xhci-plat.c
@@ -16,6 +16,7 @@
 #include <linux/module.h>
 #include <linux/of.h>
 #include <linux/platform_device.h>
+#include <linux/usb/phy.h>
 #include <linux/slab.h>
 #include <linux/usb/xhci_pdriver.h>
 
@@ -155,12 +156,27 @@ static int xhci_plat_probe(struct platform_device *pdev)
 	if (HCC_MAX_PSA(xhci->hcc_params) >= 4)
 		xhci->shared_hcd->can_do_streams = 1;
 
+	hcd->usb_phy = devm_usb_get_phy_by_phandle(&pdev->dev, "usb-phy", 0);
+	if (IS_ERR(hcd->usb_phy)) {
+		ret = PTR_ERR(hcd->usb_phy);
+		if (ret == -EPROBE_DEFER)
+			goto put_usb3_hcd;
+		hcd->usb_phy = NULL;
+	} else {
+		ret = usb_phy_init(hcd->usb_phy);
+		if (ret)
+			goto put_usb3_hcd;
+	}
+
 	ret = usb_add_hcd(xhci->shared_hcd, irq, IRQF_SHARED);
 	if (ret)
-		goto put_usb3_hcd;
+		goto disable_usb_phy;
 
 	return 0;
 
+disable_usb_phy:
+	usb_phy_shutdown(hcd->usb_phy);
+
 put_usb3_hcd:
 	usb_put_hcd(xhci->shared_hcd);
 
@@ -184,6 +200,7 @@ static int xhci_plat_remove(struct platform_device *dev)
 	struct clk *clk = xhci->clk;
 
 	usb_remove_hcd(xhci->shared_hcd);
+	usb_phy_shutdown(hcd->usb_phy);
 	usb_put_hcd(xhci->shared_hcd);
 
 	usb_remove_hcd(hcd);
-- 
cgit v1.2.3-59-g8ed1b


From 28ed20755897b3726f07a0418c3d2fe17b3e5c86 Mon Sep 17 00:00:00 2001
From: Markus Elfring <elfring@users.sourceforge.net>
Date: Thu, 5 Feb 2015 16:54:12 +0100
Subject: USB: whci-hcd: Delete an unnecessary check before the function call
 "usb_put_hcd"

The usb_put_hcd() function tests whether its argument is NULL and then
returns immediately. Thus the test around the call is not needed.

This issue was detected by using the Coccinelle software.

Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/host/whci/hcd.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

(limited to 'drivers/usb')

diff --git a/drivers/usb/host/whci/hcd.c b/drivers/usb/host/whci/hcd.c
index d7b363a418de..43626c44683b 100644
--- a/drivers/usb/host/whci/hcd.c
+++ b/drivers/usb/host/whci/hcd.c
@@ -313,8 +313,7 @@ error_wusbhc_create:
 	uwb_rc_put(wusbhc->uwb_rc);
 error:
 	whc_clean_up(whc);
-	if (usb_hcd)
-		usb_put_hcd(usb_hcd);
+	usb_put_hcd(usb_hcd);
 	return ret;
 }
 
-- 
cgit v1.2.3-59-g8ed1b


From 533726f736c2c32956d78ad6f49ffaada110cbfd Mon Sep 17 00:00:00 2001
From: Markus Elfring <elfring@users.sourceforge.net>
Date: Thu, 5 Feb 2015 16:33:09 +0100
Subject: ueagle-atm: Delete unnecessary checks before the function call
 "release_firmware"

The release_firmware() function tests whether its argument is NULL and then
returns immediately. Thus the test around the call is not needed.

This issue was detected by using the Coccinelle software.

Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/atm/ueagle-atm.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'drivers/usb')

diff --git a/drivers/usb/atm/ueagle-atm.c b/drivers/usb/atm/ueagle-atm.c
index 5a459377574b..888998a7fe31 100644
--- a/drivers/usb/atm/ueagle-atm.c
+++ b/drivers/usb/atm/ueagle-atm.c
@@ -952,7 +952,7 @@ static void uea_load_page_e1(struct work_struct *work)
 	int i;
 
 	/* reload firmware when reboot start and it's loaded already */
-	if (ovl == 0 && pageno == 0 && sc->dsp_firm) {
+	if (ovl == 0 && pageno == 0) {
 		release_firmware(sc->dsp_firm);
 		sc->dsp_firm = NULL;
 	}
@@ -1074,7 +1074,7 @@ static void uea_load_page_e4(struct work_struct *work)
 	uea_dbg(INS_TO_USBDEV(sc), "sending DSP page %u\n", pageno);
 
 	/* reload firmware when reboot start and it's loaded already */
-	if (pageno == 0 && sc->dsp_firm) {
+	if (pageno == 0) {
 		release_firmware(sc->dsp_firm);
 		sc->dsp_firm = NULL;
 	}
-- 
cgit v1.2.3-59-g8ed1b


From c60b89aa3640ac4eb279213d93828a8100acb6b5 Mon Sep 17 00:00:00 2001
From: Markus Elfring <elfring@users.sourceforge.net>
Date: Thu, 5 Feb 2015 16:07:43 +0100
Subject: USB: appledisplay: Deletion of a check before
 backlight_device_unregister()

The backlight_device_unregister() function tests whether its argument is NULL
and then returns immediately. Thus the test around the call is not needed.

This issue was detected by using the Coccinelle software.

Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/misc/appledisplay.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/usb')

diff --git a/drivers/usb/misc/appledisplay.c b/drivers/usb/misc/appledisplay.c
index b3d245ef46ef..a0a3827b4aff 100644
--- a/drivers/usb/misc/appledisplay.c
+++ b/drivers/usb/misc/appledisplay.c
@@ -329,7 +329,7 @@ error:
 					pdata->urbdata, pdata->urb->transfer_dma);
 			usb_free_urb(pdata->urb);
 		}
-		if (pdata->bd && !IS_ERR(pdata->bd))
+		if (!IS_ERR(pdata->bd))
 			backlight_device_unregister(pdata->bd);
 		kfree(pdata->msgdata);
 	}
-- 
cgit v1.2.3-59-g8ed1b


From c7b364f7dd82e8610373b8c6d788db867d7e99db Mon Sep 17 00:00:00 2001
From: Takashi Iwai <tiwai@suse.de>
Date: Thu, 5 Feb 2015 14:36:25 +0100
Subject: USB: gadget: f_mass_storage: use static attribute groups for sysfs
 entries

Instead of manual device_create_file() and device_remove_file() calls,
assign the static attribute groups to the lun device to register.
The RO or RW permissions for some entries are decided in is_visible
callback.  This simplifies the code (also the logic) and avoids the
possible races, too.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/gadget/function/f_mass_storage.c | 107 +++++++++------------------
 1 file changed, 33 insertions(+), 74 deletions(-)

(limited to 'drivers/usb')

diff --git a/drivers/usb/gadget/function/f_mass_storage.c b/drivers/usb/gadget/function/f_mass_storage.c
index 811929cd4c9e..49a2f19c2b87 100644
--- a/drivers/usb/gadget/function/f_mass_storage.c
+++ b/drivers/usb/gadget/function/f_mass_storage.c
@@ -2624,13 +2624,10 @@ static ssize_t file_store(struct device *dev, struct device_attribute *attr,
 	return fsg_store_file(curlun, filesem, buf, count);
 }
 
-static DEVICE_ATTR_RW(ro);
 static DEVICE_ATTR_RW(nofua);
-static DEVICE_ATTR_RW(file);
-
-static struct device_attribute dev_attr_ro_cdrom = __ATTR_RO(ro);
-static struct device_attribute dev_attr_file_nonremovable = __ATTR_RO(file);
-
+/* mode wil be set in fsg_lun_attr_is_visible() */
+static DEVICE_ATTR(ro, 0, ro_show, ro_store);
+static DEVICE_ATTR(file, 0, file_show, file_store);
 
 /****************************** FSG COMMON ******************************/
 
@@ -2745,40 +2742,10 @@ error_release:
 }
 EXPORT_SYMBOL_GPL(fsg_common_set_num_buffers);
 
-static inline void fsg_common_remove_sysfs(struct fsg_lun *lun)
-{
-	device_remove_file(&lun->dev, &dev_attr_nofua);
-	/*
-	 * device_remove_file() =>
-	 *
-	 * here the attr (e.g. dev_attr_ro) is only used to be passed to:
-	 *
-	 *	sysfs_remove_file() =>
-	 *
-	 *	here e.g. both dev_attr_ro_cdrom and dev_attr_ro are in
-	 *	the same namespace and
-	 *	from here only attr->name is passed to:
-	 *
-	 *		sysfs_hash_and_remove()
-	 *
-	 *		attr->name is the same for dev_attr_ro_cdrom and
-	 *		dev_attr_ro
-	 *		attr->name is the same for dev_attr_file and
-	 *		dev_attr_file_nonremovable
-	 *
-	 * so we don't differentiate between removing e.g. dev_attr_ro_cdrom
-	 * and dev_attr_ro
-	 */
-	device_remove_file(&lun->dev, &dev_attr_ro);
-	device_remove_file(&lun->dev, &dev_attr_file);
-}
-
 void fsg_common_remove_lun(struct fsg_lun *lun, bool sysfs)
 {
-	if (sysfs) {
-		fsg_common_remove_sysfs(lun);
+	if (sysfs)
 		device_unregister(&lun->dev);
-	}
 	fsg_lun_close(lun);
 	kfree(lun);
 }
@@ -2877,41 +2844,35 @@ int fsg_common_set_cdev(struct fsg_common *common,
 }
 EXPORT_SYMBOL_GPL(fsg_common_set_cdev);
 
-static inline int fsg_common_add_sysfs(struct fsg_common *common,
-				       struct fsg_lun *lun)
-{
-	int rc;
+static struct attribute *fsg_lun_dev_attrs[] = {
+	&dev_attr_ro.attr,
+	&dev_attr_file.attr,
+	&dev_attr_nofua.attr,
+	NULL
+};
 
-	rc = device_register(&lun->dev);
-	if (rc) {
-		put_device(&lun->dev);
-		return rc;
-	}
+static umode_t fsg_lun_dev_is_visible(struct kobject *kobj,
+				      struct attribute *attr, int idx)
+{
+	struct device *dev = kobj_to_dev(kobj);
+	struct fsg_lun *lun = fsg_lun_from_dev(dev);
 
-	rc = device_create_file(&lun->dev,
-				lun->cdrom
-			      ? &dev_attr_ro_cdrom
-			      : &dev_attr_ro);
-	if (rc)
-		goto error;
-	rc = device_create_file(&lun->dev,
-				lun->removable
-			      ? &dev_attr_file
-			      : &dev_attr_file_nonremovable);
-	if (rc)
-		goto error;
-	rc = device_create_file(&lun->dev, &dev_attr_nofua);
-	if (rc)
-		goto error;
+	if (attr == &dev_attr_ro.attr)
+		return lun->cdrom ? S_IRUGO : (S_IWUSR | S_IRUGO);
+	if (attr == &dev_attr_file.attr)
+		return lun->removable ? (S_IWUSR | S_IRUGO) : S_IRUGO;
+	return attr->mode;
+}
 
-	return 0;
+static const struct attribute_group fsg_lun_dev_group = {
+	.attrs = fsg_lun_dev_attrs,
+	.is_visible = fsg_lun_dev_is_visible,
+};
 
-error:
-	/* removing nonexistent files is a no-op */
-	fsg_common_remove_sysfs(lun);
-	device_unregister(&lun->dev);
-	return rc;
-}
+static const struct attribute_group *fsg_lun_dev_groups[] = {
+	&fsg_lun_dev_group,
+	NULL
+};
 
 int fsg_common_create_lun(struct fsg_common *common, struct fsg_lun_config *cfg,
 			  unsigned int id, const char *name,
@@ -2949,13 +2910,15 @@ int fsg_common_create_lun(struct fsg_common *common, struct fsg_lun_config *cfg,
 	} else {
 		lun->dev.release = fsg_lun_release;
 		lun->dev.parent = &common->gadget->dev;
+		lun->dev.groups = fsg_lun_dev_groups;
 		dev_set_drvdata(&lun->dev, &common->filesem);
 		dev_set_name(&lun->dev, "%s", name);
 		lun->name = dev_name(&lun->dev);
 
-		rc = fsg_common_add_sysfs(common, lun);
+		rc = device_register(&lun->dev);
 		if (rc) {
 			pr_info("failed to register LUN%d: %d\n", id, rc);
+			put_device(&lun->dev);
 			goto error_sysfs;
 		}
 	}
@@ -2988,10 +2951,8 @@ int fsg_common_create_lun(struct fsg_common *common, struct fsg_lun_config *cfg,
 	return 0;
 
 error_lun:
-	if (common->sysfs) {
-		fsg_common_remove_sysfs(lun);
+	if (common->sysfs)
 		device_unregister(&lun->dev);
-	}
 	fsg_lun_close(lun);
 	common->luns[id] = NULL;
 error_sysfs:
@@ -3077,8 +3038,6 @@ static void fsg_common_release(struct kref *ref)
 			struct fsg_lun *lun = *lun_it;
 			if (!lun)
 				continue;
-			if (common->sysfs)
-				fsg_common_remove_sysfs(lun);
 			fsg_lun_close(lun);
 			if (common->sysfs)
 				device_unregister(&lun->dev);
-- 
cgit v1.2.3-59-g8ed1b


From 0de846963586e6ba4133e273dcea66b2f0870db3 Mon Sep 17 00:00:00 2001
From: Bas Peters <baspeters93@gmail.com>
Date: Sat, 7 Feb 2015 23:42:42 +0100
Subject: drivers: usb: storage: alauda.c: properly place braces after function
 declarations

This patch places braces on a new line following function declarations.

Signed-off-by: Bas Peters <baspeters93@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/storage/alauda.c | 15 ++++++++++-----
 1 file changed, 10 insertions(+), 5 deletions(-)

(limited to 'drivers/usb')

diff --git a/drivers/usb/storage/alauda.c b/drivers/usb/storage/alauda.c
index 62c2d9daa7d6..4b55ab66a534 100644
--- a/drivers/usb/storage/alauda.c
+++ b/drivers/usb/storage/alauda.c
@@ -207,7 +207,8 @@ static struct alauda_card_info alauda_card_ids[] = {
 	{ 0,}
 };
 
-static struct alauda_card_info *alauda_card_find_id(unsigned char id) {
+static struct alauda_card_info *alauda_card_find_id(unsigned char id)
+{
 	int i;
 
 	for (i = 0; alauda_card_ids[i].id != 0; i++)
@@ -223,7 +224,8 @@ static struct alauda_card_info *alauda_card_find_id(unsigned char id) {
 static unsigned char parity[256];
 static unsigned char ecc2[256];
 
-static void nand_init_ecc(void) {
+static void nand_init_ecc(void)
+{
 	int i, j, a;
 
 	parity[0] = 0;
@@ -247,7 +249,8 @@ static void nand_init_ecc(void) {
 }
 
 /* compute 3-byte ecc on 256 bytes */
-static void nand_compute_ecc(unsigned char *data, unsigned char *ecc) {
+static void nand_compute_ecc(unsigned char *data, unsigned char *ecc)
+{
 	int i, j, a;
 	unsigned char par = 0, bit, bits[8] = {0};
 
@@ -270,11 +273,13 @@ static void nand_compute_ecc(unsigned char *data, unsigned char *ecc) {
 	ecc[2] = ecc2[par];
 }
 
-static int nand_compare_ecc(unsigned char *data, unsigned char *ecc) {
+static int nand_compare_ecc(unsigned char *data, unsigned char *ecc)
+{
 	return (data[0] == ecc[0] && data[1] == ecc[1] && data[2] == ecc[2]);
 }
 
-static void nand_store_ecc(unsigned char *data, unsigned char *ecc) {
+static void nand_store_ecc(unsigned char *data, unsigned char *ecc)
+{
 	memcpy(data, ecc, 3);
 }
 
-- 
cgit v1.2.3-59-g8ed1b


From e9c585907f962a6ed55dc8382a0a606190c7cae0 Mon Sep 17 00:00:00 2001
From: Bas Peters <baspeters93@gmail.com>
Date: Sat, 7 Feb 2015 23:42:43 +0100
Subject: drivers: usb: storage: cypress_atacb.c: trivial checkpatch fixes

Fixes errors thrown by checkpatch over a space issue and the
incorrect indentation of a switch statement.

Signed-off-by: Bas Peters <baspeters93@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/storage/cypress_atacb.c | 17 ++++++++---------
 1 file changed, 8 insertions(+), 9 deletions(-)

(limited to 'drivers/usb')

diff --git a/drivers/usb/storage/cypress_atacb.c b/drivers/usb/storage/cypress_atacb.c
index 8514a2d82b72..b3466d1395f2 100644
--- a/drivers/usb/storage/cypress_atacb.c
+++ b/drivers/usb/storage/cypress_atacb.c
@@ -96,13 +96,13 @@ static void cypress_atacb_passthrough(struct scsi_cmnd *srb, struct us_data *us)
 	if (save_cmnd[1] >> 5) /* MULTIPLE_COUNT */
 		goto invalid_fld;
 	/* check protocol */
-	switch((save_cmnd[1] >> 1) & 0xf) {
-		case 3: /*no DATA */
-		case 4: /* PIO in */
-		case 5: /* PIO out */
-			break;
-		default:
-			goto invalid_fld;
+	switch ((save_cmnd[1] >> 1) & 0xf) {
+	case 3: /*no DATA */
+	case 4: /* PIO in */
+	case 5: /* PIO out */
+		break;
+	default:
+		goto invalid_fld;
 	}
 
 	/* first build the ATACB command */
@@ -132,8 +132,7 @@ static void cypress_atacb_passthrough(struct scsi_cmnd *srb, struct us_data *us)
 					|| save_cmnd[11])
 				goto invalid_fld;
 		}
-	}
-	else { /* ATA12 */
+	} else { /* ATA12 */
 		srb->cmnd[ 6] = save_cmnd[3]; /* features */
 		srb->cmnd[ 7] = save_cmnd[4]; /* sector count */
 		srb->cmnd[ 8] = save_cmnd[5]; /* lba low */
-- 
cgit v1.2.3-59-g8ed1b


From 333c65bc8b2482dbbb46f4223381160333aaaddd Mon Sep 17 00:00:00 2001
From: Yannick Guerrini <yguerrini@tomshardware.fr>
Date: Tue, 24 Feb 2015 16:42:45 +0100
Subject: usb: storage: Fix trivial typo in isd200_log_config()

Change 'Supsend' to 'Suspend'

Signed-off-by: Yannick Guerrini <yguerrini@tomshardware.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/storage/isd200.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/usb')

diff --git a/drivers/usb/storage/isd200.c b/drivers/usb/storage/isd200.c
index 599d8bff26c3..076178645ba4 100644
--- a/drivers/usb/storage/isd200.c
+++ b/drivers/usb/storage/isd200.c
@@ -737,7 +737,7 @@ static void isd200_log_config(struct us_data *us, struct isd200_info *info)
 		     info->ConfigData.ATAExtraConfig & ATACFGE_CONF_DESC2);
 	usb_stor_dbg(us, "      Skip Device Boot: 0x%x\n",
 		     info->ConfigData.ATAExtraConfig & ATACFGE_SKIP_BOOT);
-	usb_stor_dbg(us, "      ATA 3 State Supsend: 0x%x\n",
+	usb_stor_dbg(us, "      ATA 3 State Suspend: 0x%x\n",
 		     info->ConfigData.ATAExtraConfig & ATACFGE_STATE_SUSPEND);
 	usb_stor_dbg(us, "      Descriptor Override: 0x%x\n",
 		     info->ConfigData.ATAExtraConfig & ATACFGE_DESC_OVERRIDE);
-- 
cgit v1.2.3-59-g8ed1b


From 8f116d1c12580b7c2349e3291d22621ee21b08a0 Mon Sep 17 00:00:00 2001
From: Zhangfei Gao <zhangfei.gao@linaro.org>
Date: Thu, 12 Feb 2015 16:18:09 +0800
Subject: usb: load usb phy earlier

USB PHY works proper is the base for the coming USB controller operation.
With this patch, it can avoid the controller drivers which are linked
earlier than USB PHY always being probed deferral.
Look at drivers/Makefile, it links phy first with the similar method.

Signed-off-by: Zhangfei Gao <zhangfei.gao@linaro.org>
Acked-by: Peter Chen <peter.chen@freescale.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/Makefile | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/usb')

diff --git a/drivers/usb/Makefile b/drivers/usb/Makefile
index 2f1e2aa42b44..d8926c6cd2a8 100644
--- a/drivers/usb/Makefile
+++ b/drivers/usb/Makefile
@@ -5,6 +5,7 @@
 # Object files in subdirectories
 
 obj-$(CONFIG_USB)		+= core/
+obj-$(CONFIG_USB_SUPPORT)	+= phy/
 
 obj-$(CONFIG_USB_DWC3)		+= dwc3/
 obj-$(CONFIG_USB_DWC2)		+= dwc2/
@@ -48,7 +49,6 @@ obj-$(CONFIG_USB_MICROTEK)	+= image/
 obj-$(CONFIG_USB_SERIAL)	+= serial/
 
 obj-$(CONFIG_USB)		+= misc/
-obj-$(CONFIG_USB_SUPPORT)	+= phy/
 obj-$(CONFIG_EARLY_PRINTK_DBGP)	+= early/
 
 obj-$(CONFIG_USB_ATM)		+= atm/
-- 
cgit v1.2.3-59-g8ed1b


From 26d4a1e9c4aaa7799a71524c871214bd7448d430 Mon Sep 17 00:00:00 2001
From: Sudeep Holla <sudeep.holla@arm.com>
Date: Wed, 4 Mar 2015 17:07:57 +0000
Subject: usb: isp1760: fix possible deadlock in isp1760_udc_irq

Use spin_{un,}lock_irq{save,restore} in isp1760_udc_{start,stop} to
prevent following potentially deadlock scenario between
isp1760_udc_{start,stop} and isp1760_udc_irq :

=================================
[ INFO: inconsistent lock state ]
4.0.0-rc2-00004-gf7bb2ef60173 #51 Not tainted
---------------------------------
inconsistent {HARDIRQ-ON-W} -> {IN-HARDIRQ-W} usage.
in:imklog/2118 [HC1[1]:SC0[0]:HE0:SE1] takes:
 (&(&udc->lock)->rlock){?.+...}, at: [<c0397a93>] isp1760_udc_irq+0x367/0x9dc
{HARDIRQ-ON-W} state was registered at:
  [<c05135b3>] _raw_spin_lock+0x23/0x30
  [<c0396b87>] isp1760_udc_start+0x23/0xf8
  [<c039dc21>] udc_bind_to_driver+0x71/0xb0
  [<c039de4f>] usb_gadget_probe_driver+0x53/0x9c
  [<bf80d0df>] usb_composite_probe+0x8a/0xa4 [libcomposite]
  [<bf8311a7>] 0xbf8311a7
  [<c00088c5>] do_one_initcall+0x8d/0x17c
  [<c050b92d>] do_init_module+0x49/0x148
  [<c0087323>] load_module+0xb7f/0xbc4
  [<c0087471>] SyS_finit_module+0x51/0x74
  [<c000d8c1>] ret_fast_syscall+0x1/0x68
irq event stamp: 4966
hardirqs last  enabled at (4965): [<c05137df>] _raw_spin_unlock_irq+0x1f/0x24
hardirqs last disabled at (4966): [<c00110b3>] __irq_svc+0x33/0x64
softirqs last  enabled at (4458): [<c0023475>] __do_softirq+0x23d/0x2d0
softirqs last disabled at (4389): [<c002380b>] irq_exit+0xef/0x15c

other info that might help us debug this:
 Possible unsafe locking scenario:

       CPU0
       ----
  lock(&(&udc->lock)->rlock);
  <Interrupt>
    lock(&(&udc->lock)->rlock);

 *** DEADLOCK ***

1 lock held by in:imklog/2118:
 #0:  (&f->f_pos_lock){+.+.+.}, at: [<c010a101>] __fdget_pos+0x31/0x34

Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/isp1760/isp1760-udc.c | 10 ++++++----
 1 file changed, 6 insertions(+), 4 deletions(-)

(limited to 'drivers/usb')

diff --git a/drivers/usb/isp1760/isp1760-udc.c b/drivers/usb/isp1760/isp1760-udc.c
index 9612d7990565..19e6a172ff82 100644
--- a/drivers/usb/isp1760/isp1760-udc.c
+++ b/drivers/usb/isp1760/isp1760-udc.c
@@ -1191,6 +1191,7 @@ static int isp1760_udc_start(struct usb_gadget *gadget,
 			     struct usb_gadget_driver *driver)
 {
 	struct isp1760_udc *udc = gadget_to_udc(gadget);
+	unsigned long flags;
 
 	/* The hardware doesn't support low speed. */
 	if (driver->max_speed < USB_SPEED_FULL) {
@@ -1198,7 +1199,7 @@ static int isp1760_udc_start(struct usb_gadget *gadget,
 		return -EINVAL;
 	}
 
-	spin_lock(&udc->lock);
+	spin_lock_irqsave(&udc->lock, flags);
 
 	if (udc->driver) {
 		dev_err(udc->isp->dev, "UDC already has a gadget driver\n");
@@ -1208,7 +1209,7 @@ static int isp1760_udc_start(struct usb_gadget *gadget,
 
 	udc->driver = driver;
 
-	spin_unlock(&udc->lock);
+	spin_unlock_irqrestore(&udc->lock, flags);
 
 	dev_dbg(udc->isp->dev, "starting UDC with driver %s\n",
 		driver->function);
@@ -1232,6 +1233,7 @@ static int isp1760_udc_start(struct usb_gadget *gadget,
 static int isp1760_udc_stop(struct usb_gadget *gadget)
 {
 	struct isp1760_udc *udc = gadget_to_udc(gadget);
+	unsigned long flags;
 
 	dev_dbg(udc->isp->dev, "%s\n", __func__);
 
@@ -1239,9 +1241,9 @@ static int isp1760_udc_stop(struct usb_gadget *gadget)
 
 	isp1760_udc_write(udc, DC_MODE, 0);
 
-	spin_lock(&udc->lock);
+	spin_lock_irqsave(&udc->lock, flags);
 	udc->driver = NULL;
-	spin_unlock(&udc->lock);
+	spin_unlock_irqrestore(&udc->lock, flags);
 
 	return 0;
 }
-- 
cgit v1.2.3-59-g8ed1b


From 3370b0af910166e387cf4b3faeaa8b5f0cb53f29 Mon Sep 17 00:00:00 2001
From: Sudeep Holla <sudeep.holla@arm.com>
Date: Thu, 26 Feb 2015 11:47:57 +0000
Subject: usb: isp1760: add peripheral/device controller chip id

As per the SAF1761 data sheet[0], the DcChipID register represents
the hardware version number (0001h) and the chip ID (1582h) for the
Peripheral Controller.

However as per the ISP1761 data sheet[1], the DcChipID register
represents the hardware version number (0015h) and the chip ID (8210h)
for the Peripheral Controller.

This patch adds support for both the chip ID values.

[0] http://www.nxp.com/documents/data_sheet/SAF1761.pdf
[1] http://pdf.datasheetcatalog.com/datasheets2/74/742102_1.pdf

Cc: Felipe Balbi <balbi@ti.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/isp1760/isp1760-udc.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/usb')

diff --git a/drivers/usb/isp1760/isp1760-udc.c b/drivers/usb/isp1760/isp1760-udc.c
index 19e6a172ff82..fbfbd59aae64 100644
--- a/drivers/usb/isp1760/isp1760-udc.c
+++ b/drivers/usb/isp1760/isp1760-udc.c
@@ -1413,7 +1413,7 @@ static int isp1760_udc_init(struct isp1760_udc *udc)
 		return -ENODEV;
 	}
 
-	if (chipid != 0x00011582) {
+	if (chipid != 0x00011582 && chipid != 0x00158210) {
 		dev_err(udc->isp->dev, "udc: invalid chip ID 0x%08x\n", chipid);
 		return -ENODEV;
 	}
-- 
cgit v1.2.3-59-g8ed1b


From f1f0b57db01d1045d163eeb05d5a4e7bd934561a Mon Sep 17 00:00:00 2001
From: Fabian Frederick <fabf@skynet.be>
Date: Mon, 16 Mar 2015 20:20:27 +0100
Subject: usb: gadget: constify of_device_id array

of_device_id is always used as const.
(See driver.of_match_table and open firmware functions)

Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/gadget/udc/pxa27x_udc.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/usb')

diff --git a/drivers/usb/gadget/udc/pxa27x_udc.c b/drivers/usb/gadget/udc/pxa27x_udc.c
index 6a855fc9bd84..f0ae143dab6d 100644
--- a/drivers/usb/gadget/udc/pxa27x_udc.c
+++ b/drivers/usb/gadget/udc/pxa27x_udc.c
@@ -2399,7 +2399,7 @@ static struct pxa_udc memory = {
 };
 
 #if defined(CONFIG_OF)
-static struct of_device_id udc_pxa_dt_ids[] = {
+static const struct of_device_id udc_pxa_dt_ids[] = {
 	{ .compatible = "marvell,pxa270-udc" },
 	{}
 };
-- 
cgit v1.2.3-59-g8ed1b


From ebfd44ffb78a0f06ea5437996153d5b1e017c2d7 Mon Sep 17 00:00:00 2001
From: Stephen Boyd <sboyd@codeaurora.org>
Date: Fri, 13 Mar 2015 11:09:41 -0700
Subject: ehci-msm: Remove dead dependency

This dependency no longer exists now that mach-msm has been
removed. Delete it.

Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: linux-usb@vger.kernel.org
Cc: David Brown <davidb@codeaurora.org>
Cc: Bryan Huntsman <bryanh@codeaurora.org>
Cc: Daniel Walker <dwalker@fifo99.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/host/Kconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/usb')

diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
index 5ad60e46dc2b..197a6a3e613b 100644
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -198,7 +198,7 @@ config USB_EHCI_HCD_AT91
 
 config USB_EHCI_MSM
 	tristate "Support for Qualcomm QSD/MSM on-chip EHCI USB controller"
-	depends on ARCH_MSM || ARCH_QCOM
+	depends on ARCH_QCOM
 	select USB_EHCI_ROOT_HUB_TT
 	---help---
 	  Enables support for the USB Host controller present on the
-- 
cgit v1.2.3-59-g8ed1b


From 32fc9eb5b2dcebefb7fb4c8288c739c320362524 Mon Sep 17 00:00:00 2001
From: Stephen Boyd <sboyd@codeaurora.org>
Date: Fri, 13 Mar 2015 11:09:42 -0700
Subject: usb: phy: msm: Remove dead code

This code is no longer used now that mach-msm has been removed.
Delete it.

Cc: Felipe Balbi <balbi@ti.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: linux-usb@vger.kernel.org
Cc: David Brown <davidb@codeaurora.org>
Cc: Bryan Huntsman <bryanh@codeaurora.org>
Cc: Daniel Walker <dwalker@fifo99.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/phy/Kconfig       |  2 +-
 drivers/usb/phy/phy-msm-usb.c | 18 ++----------------
 include/linux/usb/msm_hsusb.h |  4 ----
 3 files changed, 3 insertions(+), 21 deletions(-)

(limited to 'drivers/usb')

diff --git a/drivers/usb/phy/Kconfig b/drivers/usb/phy/Kconfig
index 52d3d58252e1..2fb3828b5089 100644
--- a/drivers/usb/phy/Kconfig
+++ b/drivers/usb/phy/Kconfig
@@ -139,7 +139,7 @@ config USB_ISP1301
 
 config USB_MSM_OTG
 	tristate "Qualcomm on-chip USB OTG controller support"
-	depends on (USB || USB_GADGET) && (ARCH_MSM || ARCH_QCOM || COMPILE_TEST)
+	depends on (USB || USB_GADGET) && (ARCH_QCOM || COMPILE_TEST)
 	depends on RESET_CONTROLLER
 	select USB_PHY
 	help
diff --git a/drivers/usb/phy/phy-msm-usb.c b/drivers/usb/phy/phy-msm-usb.c
index 000fd892455f..b50c45c62da7 100644
--- a/drivers/usb/phy/phy-msm-usb.c
+++ b/drivers/usb/phy/phy-msm-usb.c
@@ -263,9 +263,7 @@ static int msm_otg_link_clk_reset(struct msm_otg *motg, bool assert)
 {
 	int ret;
 
-	if (motg->pdata->link_clk_reset)
-		ret = motg->pdata->link_clk_reset(motg->clk, assert);
-	else if (assert)
+	if (assert)
 		ret = reset_control_assert(motg->link_rst);
 	else
 		ret = reset_control_deassert(motg->link_rst);
@@ -281,9 +279,7 @@ static int msm_otg_phy_clk_reset(struct msm_otg *motg)
 {
 	int ret = 0;
 
-	if (motg->pdata->phy_clk_reset)
-		ret = motg->pdata->phy_clk_reset(motg->phy_reset_clk);
-	else if (motg->phy_rst)
+	if (motg->phy_rst)
 		ret = reset_control_reset(motg->phy_rst);
 
 	if (ret)
@@ -1551,16 +1547,6 @@ static int msm_otg_probe(struct platform_device *pdev)
 	phy = &motg->phy;
 	phy->dev = &pdev->dev;
 
-	if (motg->pdata->phy_clk_reset) {
-		motg->phy_reset_clk = devm_clk_get(&pdev->dev,
-					   np ? "phy" : "usb_phy_clk");
-
-		if (IS_ERR(motg->phy_reset_clk)) {
-			dev_err(&pdev->dev, "failed to get usb_phy_clk\n");
-			return PTR_ERR(motg->phy_reset_clk);
-		}
-	}
-
 	motg->clk = devm_clk_get(&pdev->dev, np ? "core" : "usb_hs_clk");
 	if (IS_ERR(motg->clk)) {
 		dev_err(&pdev->dev, "failed to get usb_hs_clk\n");
diff --git a/include/linux/usb/msm_hsusb.h b/include/linux/usb/msm_hsusb.h
index b0a39243295a..7dbecf9a4656 100644
--- a/include/linux/usb/msm_hsusb.h
+++ b/include/linux/usb/msm_hsusb.h
@@ -117,8 +117,6 @@ struct msm_otg_platform_data {
 	enum otg_control_type otg_control;
 	enum msm_usb_phy_type phy_type;
 	void (*setup_gpio)(enum usb_otg_state state);
-	int (*link_clk_reset)(struct clk *link_clk, bool assert);
-	int (*phy_clk_reset)(struct clk *phy_clk);
 };
 
 /**
@@ -128,7 +126,6 @@ struct msm_otg_platform_data {
  * @irq: IRQ number assigned for HSUSB controller.
  * @clk: clock struct of usb_hs_clk.
  * @pclk: clock struct of usb_hs_pclk.
- * @phy_reset_clk: clock struct of usb_phy_clk.
  * @core_clk: clock struct of usb_hs_core_clk.
  * @regs: ioremapped register base address.
  * @inputs: OTG state machine inputs(Id, SessValid etc).
@@ -148,7 +145,6 @@ struct msm_otg {
 	int irq;
 	struct clk *clk;
 	struct clk *pclk;
-	struct clk *phy_reset_clk;
 	struct clk *core_clk;
 	void __iomem *regs;
 #define ID		0
-- 
cgit v1.2.3-59-g8ed1b


From 7252f1bfd4bc97ec4b5fa7adaf3a1a45c325635c Mon Sep 17 00:00:00 2001
From: Vincent Palatin <vpalatin@chromium.org>
Date: Sun, 15 Mar 2015 13:24:32 -0700
Subject: usb: dwc2: avoid leaking DMA channels on disconnection

When the HCD is disconnected, the DMA transfers still in-flight were cleaned-up
but the count of available DMA channels (e.g. available_host_channels) was not
reset.
The pool of DMA channels can be depleted when doing unclean
disconnection of USB peripherals, and reaches the point where no
transfer was possible until the next reboot/reload of the driver.

Tested by putting a programmable USB mux on the port and randomly
plugging/unpluging a USB HUB with USB mass-storage key, USB-audio and
USB-ethernet dongle connected to its downstream ports, and also doing the
disconnection early while the devices are still enumerating to get more URBs
in-flight.
After the patch, the devices are still enumerating after thousands of cycles,
while the port was totally dead before.

Signed-off-by: Vincent Palatin <vpalatin@chromium.org>
Acked-by: John Youn <johnyoun@synopsys.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
---
 drivers/usb/dwc2/hcd.c | 8 ++++++++
 1 file changed, 8 insertions(+)

(limited to 'drivers/usb')

diff --git a/drivers/usb/dwc2/hcd.c b/drivers/usb/dwc2/hcd.c
index c78c8740db1d..559b55e5debb 100644
--- a/drivers/usb/dwc2/hcd.c
+++ b/drivers/usb/dwc2/hcd.c
@@ -257,6 +257,14 @@ static void dwc2_hcd_cleanup_channels(struct dwc2_hsotg *hsotg)
 		 */
 		channel->qh = NULL;
 	}
+	/* All channels have been freed, mark them available */
+	if (hsotg->core_params->uframe_sched > 0) {
+		hsotg->available_host_channels =
+			hsotg->core_params->host_channels;
+	} else {
+		hsotg->non_periodic_channels = 0;
+		hsotg->periodic_channels = 0;
+	}
 }
 
 /**
-- 
cgit v1.2.3-59-g8ed1b


From dfea9c94837d27e38c8cc85a3c1c7c268973c3c2 Mon Sep 17 00:00:00 2001
From: Peter Chen <peter.chen@freescale.com>
Date: Fri, 6 Mar 2015 10:36:02 +0800
Subject: usb: udc: store usb_udc pointer in struct usb_gadget

Instead of iterate to find usb_udc according to usb_gadget, this
way is easier.

Alan Stern suggests this way too:
http://marc.info/?l=linux-usb&m=142168496528894&w=2

Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Peter Chen <peter.chen@freescale.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
---
 drivers/usb/gadget/udc/udc-core.c | 34 +++++++++-------------------------
 include/linux/usb/gadget.h        |  3 +++
 2 files changed, 12 insertions(+), 25 deletions(-)

(limited to 'drivers/usb')

diff --git a/drivers/usb/gadget/udc/udc-core.c b/drivers/usb/gadget/udc/udc-core.c
index 5a81cb086b99..bf7ed777a87d 100644
--- a/drivers/usb/gadget/udc/udc-core.c
+++ b/drivers/usb/gadget/udc/udc-core.c
@@ -128,21 +128,11 @@ EXPORT_SYMBOL_GPL(usb_gadget_giveback_request);
 
 static void usb_gadget_state_work(struct work_struct *work)
 {
-	struct usb_gadget	*gadget = work_to_gadget(work);
-	struct usb_udc		*udc = NULL;
-
-	mutex_lock(&udc_lock);
-	list_for_each_entry(udc, &udc_list, list)
-		if (udc->gadget == gadget)
-			goto found;
-	mutex_unlock(&udc_lock);
+	struct usb_gadget *gadget = work_to_gadget(work);
+	struct usb_udc *udc = gadget->udc;
 
-	return;
-
-found:
-	mutex_unlock(&udc_lock);
-
-	sysfs_notify(&udc->dev.kobj, NULL, "state");
+	if (udc)
+		sysfs_notify(&udc->dev.kobj, NULL, "state");
 }
 
 void usb_gadget_set_state(struct usb_gadget *gadget,
@@ -278,6 +268,7 @@ int usb_add_gadget_udc_release(struct device *parent, struct usb_gadget *gadget,
 		goto err3;
 
 	udc->gadget = gadget;
+	gadget->udc = udc;
 
 	mutex_lock(&udc_lock);
 	list_add_tail(&udc->list, &udc_list);
@@ -348,21 +339,14 @@ static void usb_gadget_remove_driver(struct usb_udc *udc)
  */
 void usb_del_gadget_udc(struct usb_gadget *gadget)
 {
-	struct usb_udc		*udc = NULL;
+	struct usb_udc *udc = gadget->udc;
 
-	mutex_lock(&udc_lock);
-	list_for_each_entry(udc, &udc_list, list)
-		if (udc->gadget == gadget)
-			goto found;
-
-	dev_err(gadget->dev.parent, "gadget not registered.\n");
-	mutex_unlock(&udc_lock);
-
-	return;
+	if (!udc)
+		return;
 
-found:
 	dev_vdbg(gadget->dev.parent, "unregistering gadget\n");
 
+	mutex_lock(&udc_lock);
 	list_del(&udc->list);
 	mutex_unlock(&udc_lock);
 
diff --git a/include/linux/usb/gadget.h b/include/linux/usb/gadget.h
index 02476b3a1109..242c694a5b85 100644
--- a/include/linux/usb/gadget.h
+++ b/include/linux/usb/gadget.h
@@ -474,6 +474,7 @@ struct usb_dcd_config_params {
 
 struct usb_gadget;
 struct usb_gadget_driver;
+struct usb_udc;
 
 /* the rest of the api to the controller hardware: device operations,
  * which don't involve endpoints (or i/o).
@@ -496,6 +497,7 @@ struct usb_gadget_ops {
 /**
  * struct usb_gadget - represents a usb slave device
  * @work: (internal use) Workqueue to be used for sysfs_notify()
+ * @udc: struct usb_udc pointer for this gadget
  * @ops: Function pointers used to access hardware-specific operations.
  * @ep0: Endpoint zero, used when reading or writing responses to
  *	driver setup() requests
@@ -545,6 +547,7 @@ struct usb_gadget_ops {
  */
 struct usb_gadget {
 	struct work_struct		work;
+	struct usb_udc			*udc;
 	/* readonly to gadget driver */
 	const struct usb_gadget_ops	*ops;
 	struct usb_ep			*ep0;
-- 
cgit v1.2.3-59-g8ed1b


From 628ef0d273a69d889669a459fb4675c678ae0418 Mon Sep 17 00:00:00 2001
From: Peter Chen <peter.chen@freescale.com>
Date: Fri, 6 Mar 2015 10:36:03 +0800
Subject: usb: udc: add usb_udc_vbus_handler

This commit updates udc core vbus status, and try to connect
or disconnect gadget.

Signed-off-by: Peter Chen <peter.chen@freescale.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Felipe Balbi <balbi@ti.com>
---
 drivers/usb/gadget/udc/udc-core.c | 34 +++++++++++++++++++++++++++++++++-
 include/linux/usb/gadget.h        |  4 ++++
 2 files changed, 37 insertions(+), 1 deletion(-)

(limited to 'drivers/usb')

diff --git a/drivers/usb/gadget/udc/udc-core.c b/drivers/usb/gadget/udc/udc-core.c
index bf7ed777a87d..d69c35558f68 100644
--- a/drivers/usb/gadget/udc/udc-core.c
+++ b/drivers/usb/gadget/udc/udc-core.c
@@ -35,6 +35,8 @@
  * @dev - the child device to the actual controller
  * @gadget - the gadget. For use by the class code
  * @list - for use by the udc class driver
+ * @vbus - for udcs who care about vbus status, this value is real vbus status;
+ * for udcs who do not care about vbus status, this value is always true
  *
  * This represents the internal data structure which is used by the UDC-class
  * to hold information about udc driver and gadget together.
@@ -44,6 +46,7 @@ struct usb_udc {
 	struct usb_gadget		*gadget;
 	struct device			dev;
 	struct list_head		list;
+	bool				vbus;
 };
 
 static struct class *udc_class;
@@ -145,6 +148,34 @@ EXPORT_SYMBOL_GPL(usb_gadget_set_state);
 
 /* ------------------------------------------------------------------------- */
 
+static void usb_udc_connect_control(struct usb_udc *udc)
+{
+	if (udc->vbus)
+		usb_gadget_connect(udc->gadget);
+	else
+		usb_gadget_disconnect(udc->gadget);
+}
+
+/**
+ * usb_udc_vbus_handler - updates the udc core vbus status, and try to
+ * connect or disconnect gadget
+ * @gadget: The gadget which vbus change occurs
+ * @status: The vbus status
+ *
+ * The udc driver calls it when it wants to connect or disconnect gadget
+ * according to vbus status.
+ */
+void usb_udc_vbus_handler(struct usb_gadget *gadget, bool status)
+{
+	struct usb_udc *udc = gadget->udc;
+
+	if (udc) {
+		udc->vbus = status;
+		usb_udc_connect_control(udc);
+	}
+}
+EXPORT_SYMBOL_GPL(usb_udc_vbus_handler);
+
 /**
  * usb_gadget_udc_reset - notifies the udc core that bus reset occurs
  * @gadget: The gadget which bus reset occurs
@@ -278,6 +309,7 @@ int usb_add_gadget_udc_release(struct device *parent, struct usb_gadget *gadget,
 		goto err4;
 
 	usb_gadget_set_state(gadget, USB_STATE_NOTATTACHED);
+	udc->vbus = true;
 
 	mutex_unlock(&udc_lock);
 
@@ -381,7 +413,7 @@ static int udc_bind_to_driver(struct usb_udc *udc, struct usb_gadget_driver *dri
 		driver->unbind(udc->gadget);
 		goto err1;
 	}
-	usb_gadget_connect(udc->gadget);
+	usb_udc_connect_control(udc);
 
 	kobject_uevent(&udc->dev.kobj, KOBJ_CHANGE);
 	return 0;
diff --git a/include/linux/usb/gadget.h b/include/linux/usb/gadget.h
index 242c694a5b85..4f3dfb7d0654 100644
--- a/include/linux/usb/gadget.h
+++ b/include/linux/usb/gadget.h
@@ -1032,6 +1032,10 @@ extern void usb_gadget_udc_reset(struct usb_gadget *gadget,
 extern void usb_gadget_giveback_request(struct usb_ep *ep,
 		struct usb_request *req);
 
+/*-------------------------------------------------------------------------*/
+
+/* utility to update vbus status for udc core, it may be scheduled */
+extern void usb_udc_vbus_handler(struct usb_gadget *gadget, bool status);
 
 /*-------------------------------------------------------------------------*/
 
-- 
cgit v1.2.3-59-g8ed1b


From 467a78c82ad5f9a3e3c80eb4ba17de6bb70e4f9b Mon Sep 17 00:00:00 2001
From: Peter Chen <peter.chen@freescale.com>
Date: Fri, 6 Mar 2015 10:36:04 +0800
Subject: usb: chipidea: udc: apply new usb_udc_vbus_handler interface

It can move all pullup/pulldown operation control to udc-core
through usb_gadget_connect/usb_gadget_disconnect according to
vbus status.

Signed-off-by: Peter Chen <peter.chen@freescale.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
---
 drivers/usb/chipidea/udc.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

(limited to 'drivers/usb')

diff --git a/drivers/usb/chipidea/udc.c b/drivers/usb/chipidea/udc.c
index ff451048c1ac..55a36e046a1e 100644
--- a/drivers/usb/chipidea/udc.c
+++ b/drivers/usb/chipidea/udc.c
@@ -86,10 +86,8 @@ static int hw_device_state(struct ci_hdrc *ci, u32 dma)
 		/* interrupt, error, port change, reset, sleep/suspend */
 		hw_write(ci, OP_USBINTR, ~0,
 			     USBi_UI|USBi_UEI|USBi_PCI|USBi_URI|USBi_SLI);
-		hw_write(ci, OP_USBCMD, USBCMD_RS, USBCMD_RS);
 	} else {
 		hw_write(ci, OP_USBINTR, ~0, 0);
-		hw_write(ci, OP_USBCMD, USBCMD_RS, 0);
 	}
 	return 0;
 }
@@ -1474,7 +1472,9 @@ static int ci_udc_vbus_session(struct usb_gadget *_gadget, int is_active)
 			hw_device_reset(ci);
 			hw_device_state(ci, ci->ep0out->qh.dma);
 			usb_gadget_set_state(_gadget, USB_STATE_POWERED);
+			usb_udc_vbus_handler(_gadget, true);
 		} else {
+			usb_udc_vbus_handler(_gadget, false);
 			if (ci->driver)
 				ci->driver->disconnect(&ci->gadget);
 			hw_device_state(ci, 0);
@@ -1540,13 +1540,12 @@ static int ci_udc_pullup(struct usb_gadget *_gadget, int is_on)
 {
 	struct ci_hdrc *ci = container_of(_gadget, struct ci_hdrc, gadget);
 
-	if (!ci->vbus_active)
-		return -EOPNOTSUPP;
-
+	pm_runtime_get_sync(&ci->gadget.dev);
 	if (is_on)
 		hw_write(ci, OP_USBCMD, USBCMD_RS, USBCMD_RS);
 	else
 		hw_write(ci, OP_USBCMD, USBCMD_RS, 0);
+	pm_runtime_put_sync(&ci->gadget.dev);
 
 	return 0;
 }
@@ -1676,6 +1675,7 @@ static int ci_udc_start(struct usb_gadget *gadget,
 		spin_lock_irqsave(&ci->lock, flags);
 		hw_device_reset(ci);
 	} else {
+		usb_udc_vbus_handler(&ci->gadget, false);
 		pm_runtime_put_sync(&ci->gadget.dev);
 		return retval;
 	}
-- 
cgit v1.2.3-59-g8ed1b


From 869aee0f31429fa9d94d5aef539602b73ae0cf4b Mon Sep 17 00:00:00 2001
From: Axel Lin <axel.lin@ingics.com>
Date: Thu, 12 Mar 2015 09:15:28 +0800
Subject: usb: phy: Find the right match in devm_usb_phy_match

The res parameter passed to devm_usb_phy_match() is the location where the
pointer to the usb_phy is stored, hence it needs to be dereferenced before
comparing to the match data in order to find the correct match.

Fixes: 410219dcd2ba ("usb: otg: utils: devres: Add API's to associate a device with the phy")
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Cc: <stable@vger.kernel.org> # v3.6+
Signed-off-by: Felipe Balbi <balbi@ti.com>
---
 drivers/usb/phy/phy.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

(limited to 'drivers/usb')

diff --git a/drivers/usb/phy/phy.c b/drivers/usb/phy/phy.c
index 2f9735b35338..d1cd6b50f520 100644
--- a/drivers/usb/phy/phy.c
+++ b/drivers/usb/phy/phy.c
@@ -81,7 +81,9 @@ static void devm_usb_phy_release(struct device *dev, void *res)
 
 static int devm_usb_phy_match(struct device *dev, void *res, void *match_data)
 {
-	return res == match_data;
+	struct usb_phy **phy = res;
+
+	return *phy == match_data;
 }
 
 /**
-- 
cgit v1.2.3-59-g8ed1b


From 990919cad55a8c38fc73b0a6a0c9e5e4e927a5f8 Mon Sep 17 00:00:00 2001
From: Peter Chen <peter.chen@freescale.com>
Date: Thu, 12 Mar 2015 09:47:53 +0800
Subject: usb: common: otg-fsm: only signal connect after switching to
 peripheral

We should signal connect (pull up dp) after we have already
at peripheral mode, otherwise, the dp may be toggled due to
we reset controller or do disconnect during the initialization
for peripheral, then, the host may be confused during the
enumeration, eg, it finds the reset can't succeed, but the
device is still there, see below error message.

hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
hub 1-0:1.0: cannot reset port 1 (err = -32)
hub 1-0:1.0: cannot reset port 1 (err = -32)
hub 1-0:1.0: cannot reset port 1 (err = -32)
hub 1-0:1.0: cannot reset port 1 (err = -32)
hub 1-0:1.0: cannot reset port 1 (err = -32)
hub 1-0:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
hub 1-0:1.0: cannot reset port 1 (err = -32)
hub 1-0:1.0: cannot reset port 1 (err = -32)
hub 1-0:1.0: cannot reset port 1 (err = -32)
hub 1-0:1.0: cannot reset port 1 (err = -32)
hub 1-0:1.0: cannot reset port 1 (err = -32)
hub 1-0:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
hub 1-0:1.0: cannot reset port 1 (err = -32)
hub 1-0:1.0: cannot reset port 1 (err = -32)
hub 1-0:1.0: cannot reset port 1 (err = -32)
hub 1-0:1.0: cannot reset port 1 (err = -32)
hub 1-0:1.0: cannot reset port 1 (err = -32)
hub 1-0:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
hub 1-0:1.0: cannot reset port 1 (err = -32)
hub 1-0:1.0: cannot reset port 1 (err = -32)
hub 1-0:1.0: cannot reset port 1 (err = -32)
hub 1-0:1.0: cannot reset port 1 (err = -32)
hub 1-0:1.0: cannot reset port 1 (err = -32)
hub 1-0:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
hub 1-0:1.0: unable to enumerate USB device on port 1

Fixes: the issue existed when the otg fsm code was added.
Cc: <stable@vger.kernel.org> # v3.16+
Signed-off-by: Peter Chen <peter.chen@freescale.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
---
 drivers/usb/common/usb-otg-fsm.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'drivers/usb')

diff --git a/drivers/usb/common/usb-otg-fsm.c b/drivers/usb/common/usb-otg-fsm.c
index c6b35b77dab7..61d538aa2346 100644
--- a/drivers/usb/common/usb-otg-fsm.c
+++ b/drivers/usb/common/usb-otg-fsm.c
@@ -150,9 +150,9 @@ static int otg_set_state(struct otg_fsm *fsm, enum usb_otg_state new_state)
 		break;
 	case OTG_STATE_B_PERIPHERAL:
 		otg_chrg_vbus(fsm, 0);
-		otg_loc_conn(fsm, 1);
 		otg_loc_sof(fsm, 0);
 		otg_set_protocol(fsm, PROTO_GADGET);
+		otg_loc_conn(fsm, 1);
 		break;
 	case OTG_STATE_B_WAIT_ACON:
 		otg_chrg_vbus(fsm, 0);
@@ -213,10 +213,10 @@ static int otg_set_state(struct otg_fsm *fsm, enum usb_otg_state new_state)
 
 		break;
 	case OTG_STATE_A_PERIPHERAL:
-		otg_loc_conn(fsm, 1);
 		otg_loc_sof(fsm, 0);
 		otg_set_protocol(fsm, PROTO_GADGET);
 		otg_drv_vbus(fsm, 1);
+		otg_loc_conn(fsm, 1);
 		otg_add_timer(fsm, A_BIDL_ADIS);
 		break;
 	case OTG_STATE_A_WAIT_VFALL:
-- 
cgit v1.2.3-59-g8ed1b


From 00f30d29b497577954b20237b405e9d22b5286c2 Mon Sep 17 00:00:00 2001
From: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Date: Mon, 16 Mar 2015 16:36:48 +0900
Subject: usb: renesas_usbhs: fix spinlock suspected in a gadget complete
 function

According to the gadget.h, a "complete" function will always be called
with interrupts disabled. However, sometimes usbhsg_queue_pop() function
is called with interrupts enabled. So, this function should be held by
usbhs_lock() to disable interruption. Also, this driver has to call
spin_unlock() to avoid spinlock recursion by this driver before calling
usb_gadget_giveback_request().
Otherwise, there is possible to cause a spinlock suspected in a gadget
complete function.

Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
---
 drivers/usb/renesas_usbhs/mod_gadget.c | 22 +++++++++++++++++++---
 1 file changed, 19 insertions(+), 3 deletions(-)

(limited to 'drivers/usb')

diff --git a/drivers/usb/renesas_usbhs/mod_gadget.c b/drivers/usb/renesas_usbhs/mod_gadget.c
index e0384af77e56..dc2aa3261202 100644
--- a/drivers/usb/renesas_usbhs/mod_gadget.c
+++ b/drivers/usb/renesas_usbhs/mod_gadget.c
@@ -119,18 +119,34 @@ struct usbhsg_recip_handle {
 /*
  *		queue push/pop
  */
-static void usbhsg_queue_pop(struct usbhsg_uep *uep,
-			     struct usbhsg_request *ureq,
-			     int status)
+static void __usbhsg_queue_pop(struct usbhsg_uep *uep,
+			       struct usbhsg_request *ureq,
+			       int status)
 {
 	struct usbhsg_gpriv *gpriv = usbhsg_uep_to_gpriv(uep);
 	struct usbhs_pipe *pipe = usbhsg_uep_to_pipe(uep);
 	struct device *dev = usbhsg_gpriv_to_dev(gpriv);
+	struct usbhs_priv *priv = usbhsg_gpriv_to_priv(gpriv);
 
 	dev_dbg(dev, "pipe %d : queue pop\n", usbhs_pipe_number(pipe));
 
 	ureq->req.status = status;
+	spin_unlock(usbhs_priv_to_lock(priv));
 	usb_gadget_giveback_request(&uep->ep, &ureq->req);
+	spin_lock(usbhs_priv_to_lock(priv));
+}
+
+static void usbhsg_queue_pop(struct usbhsg_uep *uep,
+			     struct usbhsg_request *ureq,
+			     int status)
+{
+	struct usbhsg_gpriv *gpriv = usbhsg_uep_to_gpriv(uep);
+	struct usbhs_priv *priv = usbhsg_gpriv_to_priv(gpriv);
+	unsigned long flags;
+
+	usbhs_lock(priv, flags);
+	__usbhsg_queue_pop(uep, ureq, status);
+	usbhs_unlock(priv, flags);
 }
 
 static void usbhsg_queue_done(struct usbhs_priv *priv, struct usbhs_pkt *pkt)
-- 
cgit v1.2.3-59-g8ed1b


From 557f3586aaac0202010eb70e00d2694437f0cb37 Mon Sep 17 00:00:00 2001
From: Joe Perches <joe@perches.com>
Date: Mon, 16 Mar 2015 11:09:38 -0700
Subject: usb: gadget: goku_udc: Remove uses of seq_<foo> return values

The seq_printf/seq_puts/seq_putc return values, because they
are frequently misused, will eventually be converted to void.

See: commit 1f33c41c03da ("seq_file: Rename seq_overflow() to
     seq_has_overflowed() and make public")

Miscellanea:

o Coalesce formats, realign arguments
o Create static functions for statement expression macros
o Use c90 style comments instead of c99

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
---
 drivers/usb/gadget/udc/goku_udc.c | 233 ++++++++++++++++++++------------------
 1 file changed, 122 insertions(+), 111 deletions(-)

(limited to 'drivers/usb')

diff --git a/drivers/usb/gadget/udc/goku_udc.c b/drivers/usb/gadget/udc/goku_udc.c
index 5b9176e7202a..9e8d842e8c08 100644
--- a/drivers/usb/gadget/udc/goku_udc.c
+++ b/drivers/usb/gadget/udc/goku_udc.c
@@ -1024,35 +1024,79 @@ static const char proc_node_name [] = "driver/udc";
 static void dump_intmask(struct seq_file *m, const char *label, u32 mask)
 {
 	/* int_status is the same format ... */
-	seq_printf(m,
-		"%s %05X =" FOURBITS EIGHTBITS EIGHTBITS "\n",
-		label, mask,
-		(mask & INT_PWRDETECT) ? " power" : "",
-		(mask & INT_SYSERROR) ? " sys" : "",
-		(mask & INT_MSTRDEND) ? " in-dma" : "",
-		(mask & INT_MSTWRTMOUT) ? " wrtmo" : "",
-
-		(mask & INT_MSTWREND) ? " out-dma" : "",
-		(mask & INT_MSTWRSET) ? " wrset" : "",
-		(mask & INT_ERR) ? " err" : "",
-		(mask & INT_SOF) ? " sof" : "",
-
-		(mask & INT_EP3NAK) ? " ep3nak" : "",
-		(mask & INT_EP2NAK) ? " ep2nak" : "",
-		(mask & INT_EP1NAK) ? " ep1nak" : "",
-		(mask & INT_EP3DATASET) ? " ep3" : "",
-
-		(mask & INT_EP2DATASET) ? " ep2" : "",
-		(mask & INT_EP1DATASET) ? " ep1" : "",
-		(mask & INT_STATUSNAK) ? " ep0snak" : "",
-		(mask & INT_STATUS) ? " ep0status" : "",
-
-		(mask & INT_SETUP) ? " setup" : "",
-		(mask & INT_ENDPOINT0) ? " ep0" : "",
-		(mask & INT_USBRESET) ? " reset" : "",
-		(mask & INT_SUSPEND) ? " suspend" : "");
+	seq_printf(m, "%s %05X =" FOURBITS EIGHTBITS EIGHTBITS "\n",
+		   label, mask,
+		   (mask & INT_PWRDETECT) ? " power" : "",
+		   (mask & INT_SYSERROR) ? " sys" : "",
+		   (mask & INT_MSTRDEND) ? " in-dma" : "",
+		   (mask & INT_MSTWRTMOUT) ? " wrtmo" : "",
+
+		   (mask & INT_MSTWREND) ? " out-dma" : "",
+		   (mask & INT_MSTWRSET) ? " wrset" : "",
+		   (mask & INT_ERR) ? " err" : "",
+		   (mask & INT_SOF) ? " sof" : "",
+
+		   (mask & INT_EP3NAK) ? " ep3nak" : "",
+		   (mask & INT_EP2NAK) ? " ep2nak" : "",
+		   (mask & INT_EP1NAK) ? " ep1nak" : "",
+		   (mask & INT_EP3DATASET) ? " ep3" : "",
+
+		   (mask & INT_EP2DATASET) ? " ep2" : "",
+		   (mask & INT_EP1DATASET) ? " ep1" : "",
+		   (mask & INT_STATUSNAK) ? " ep0snak" : "",
+		   (mask & INT_STATUS) ? " ep0status" : "",
+
+		   (mask & INT_SETUP) ? " setup" : "",
+		   (mask & INT_ENDPOINT0) ? " ep0" : "",
+		   (mask & INT_USBRESET) ? " reset" : "",
+		   (mask & INT_SUSPEND) ? " suspend" : "");
+}
+
+static const char *udc_ep_state(enum ep0state state)
+{
+	switch (state) {
+	case EP0_DISCONNECT:
+		return "ep0_disconnect";
+	case EP0_IDLE:
+		return "ep0_idle";
+	case EP0_IN:
+		return "ep0_in";
+	case EP0_OUT:
+		return "ep0_out";
+	case EP0_STATUS:
+		return "ep0_status";
+	case EP0_STALL:
+		return "ep0_stall";
+	case EP0_SUSPEND:
+		return "ep0_suspend";
+	}
+
+	return "ep0_?";
 }
 
+static const char *udc_ep_status(u32 status)
+{
+	switch (status & EPxSTATUS_EP_MASK) {
+	case EPxSTATUS_EP_READY:
+		return "ready";
+	case EPxSTATUS_EP_DATAIN:
+		return "packet";
+	case EPxSTATUS_EP_FULL:
+		return "full";
+	case EPxSTATUS_EP_TX_ERR:	/* host will retry */
+		return "tx_err";
+	case EPxSTATUS_EP_RX_ERR:
+		return "rx_err";
+	case EPxSTATUS_EP_BUSY:		/* ep0 only */
+		return "busy";
+	case EPxSTATUS_EP_STALL:
+		return "stall";
+	case EPxSTATUS_EP_INVALID:	/* these "can't happen" */
+		return "invalid";
+	}
+
+	return "?";
+}
 
 static int udc_proc_read(struct seq_file *m, void *v)
 {
@@ -1068,29 +1112,18 @@ static int udc_proc_read(struct seq_file *m, void *v)
 	tmp = readl(&regs->power_detect);
 	is_usb_connected = tmp & PW_DETECT;
 	seq_printf(m,
-		"%s - %s\n"
-		"%s version: %s %s\n"
-		"Gadget driver: %s\n"
-		"Host %s, %s\n"
-		"\n",
-		pci_name(dev->pdev), driver_desc,
-		driver_name, DRIVER_VERSION, dmastr(),
-		dev->driver ? dev->driver->driver.name : "(none)",
-		is_usb_connected
-			? ((tmp & PW_PULLUP) ? "full speed" : "powered")
-			: "disconnected",
-		({const char *state;
-		switch(dev->ep0state){
-		case EP0_DISCONNECT:	state = "ep0_disconnect"; break;
-		case EP0_IDLE:		state = "ep0_idle"; break;
-		case EP0_IN:		state = "ep0_in"; break;
-		case EP0_OUT:		state = "ep0_out"; break;
-		case EP0_STATUS:	state = "ep0_status"; break;
-		case EP0_STALL:		state = "ep0_stall"; break;
-		case EP0_SUSPEND:	state = "ep0_suspend"; break;
-		default:		state = "ep0_?"; break;
-		} state; })
-		);
+		   "%s - %s\n"
+		   "%s version: %s %s\n"
+		   "Gadget driver: %s\n"
+		   "Host %s, %s\n"
+		   "\n",
+		   pci_name(dev->pdev), driver_desc,
+		   driver_name, DRIVER_VERSION, dmastr(),
+		   dev->driver ? dev->driver->driver.name : "(none)",
+		   is_usb_connected
+			   ? ((tmp & PW_PULLUP) ? "full speed" : "powered")
+			   : "disconnected",
+		   udc_ep_state(dev->ep0state));
 
 	dump_intmask(m, "int_status", readl(&regs->int_status));
 	dump_intmask(m, "int_enable", readl(&regs->int_enable));
@@ -1099,31 +1132,30 @@ static int udc_proc_read(struct seq_file *m, void *v)
 		goto done;
 
 	/* registers for (active) device and ep0 */
-	if (seq_printf(m, "\nirqs %lu\ndataset %02x "
-			"single.bcs %02x.%02x state %x addr %u\n",
-			dev->irqs, readl(&regs->DataSet),
-			readl(&regs->EPxSingle), readl(&regs->EPxBCS),
-			readl(&regs->UsbState),
-			readl(&regs->address)) < 0)
+	seq_printf(m, "\nirqs %lu\ndataset %02x single.bcs %02x.%02x state %x addr %u\n",
+		   dev->irqs, readl(&regs->DataSet),
+		   readl(&regs->EPxSingle), readl(&regs->EPxBCS),
+		   readl(&regs->UsbState),
+		   readl(&regs->address));
+	if (seq_has_overflowed(m))
 		goto done;
 
 	tmp = readl(&regs->dma_master);
-	if (seq_printf(m,
-		"dma %03X =" EIGHTBITS "%s %s\n", tmp,
-		(tmp & MST_EOPB_DIS) ? " eopb-" : "",
-		(tmp & MST_EOPB_ENA) ? " eopb+" : "",
-		(tmp & MST_TIMEOUT_DIS) ? " tmo-" : "",
-		(tmp & MST_TIMEOUT_ENA) ? " tmo+" : "",
-
-		(tmp & MST_RD_EOPB) ? " eopb" : "",
-		(tmp & MST_RD_RESET) ? " in_reset" : "",
-		(tmp & MST_WR_RESET) ? " out_reset" : "",
-		(tmp & MST_RD_ENA) ? " IN" : "",
-
-		(tmp & MST_WR_ENA) ? " OUT" : "",
-		(tmp & MST_CONNECTION)
-			? "ep1in/ep2out"
-			: "ep1out/ep2in") < 0)
+	seq_printf(m, "dma %03X =" EIGHTBITS "%s %s\n",
+		   tmp,
+		   (tmp & MST_EOPB_DIS) ? " eopb-" : "",
+		   (tmp & MST_EOPB_ENA) ? " eopb+" : "",
+		   (tmp & MST_TIMEOUT_DIS) ? " tmo-" : "",
+		   (tmp & MST_TIMEOUT_ENA) ? " tmo+" : "",
+
+		   (tmp & MST_RD_EOPB) ? " eopb" : "",
+		   (tmp & MST_RD_RESET) ? " in_reset" : "",
+		   (tmp & MST_WR_RESET) ? " out_reset" : "",
+		   (tmp & MST_RD_ENA) ? " IN" : "",
+
+		   (tmp & MST_WR_ENA) ? " OUT" : "",
+		   (tmp & MST_CONNECTION) ? "ep1in/ep2out" : "ep1out/ep2in");
+	if (seq_has_overflowed(m))
 		goto done;
 
 	/* dump endpoint queues */
@@ -1135,44 +1167,23 @@ static int udc_proc_read(struct seq_file *m, void *v)
 			continue;
 
 		tmp = readl(ep->reg_status);
-		if (seq_printf(m,
-			"%s %s max %u %s, irqs %lu, "
-			"status %02x (%s) " FOURBITS "\n",
-			ep->ep.name,
-			ep->is_in ? "in" : "out",
-			ep->ep.maxpacket,
-			ep->dma ? "dma" : "pio",
-			ep->irqs,
-			tmp, ({ char *s;
-			switch (tmp & EPxSTATUS_EP_MASK) {
-			case EPxSTATUS_EP_READY:
-				s = "ready"; break;
-			case EPxSTATUS_EP_DATAIN:
-				s = "packet"; break;
-			case EPxSTATUS_EP_FULL:
-				s = "full"; break;
-			case EPxSTATUS_EP_TX_ERR:	// host will retry
-				s = "tx_err"; break;
-			case EPxSTATUS_EP_RX_ERR:
-				s = "rx_err"; break;
-			case EPxSTATUS_EP_BUSY:		/* ep0 only */
-				s = "busy"; break;
-			case EPxSTATUS_EP_STALL:
-				s = "stall"; break;
-			case EPxSTATUS_EP_INVALID:	// these "can't happen"
-				s = "invalid"; break;
-			default:
-				s = "?"; break;
-			} s; }),
-			(tmp & EPxSTATUS_TOGGLE) ? "data1" : "data0",
-			(tmp & EPxSTATUS_SUSPEND) ? " suspend" : "",
-			(tmp & EPxSTATUS_FIFO_DISABLE) ? " disable" : "",
-			(tmp & EPxSTATUS_STAGE_ERROR) ? " ep0stat" : ""
-			) < 0)
+		seq_printf(m, "%s %s max %u %s, irqs %lu, status %02x (%s) " FOURBITS "\n",
+			   ep->ep.name,
+			   ep->is_in ? "in" : "out",
+			   ep->ep.maxpacket,
+			   ep->dma ? "dma" : "pio",
+			   ep->irqs,
+			   tmp, udc_ep_status(tmp),
+			   (tmp & EPxSTATUS_TOGGLE) ? "data1" : "data0",
+			   (tmp & EPxSTATUS_SUSPEND) ? " suspend" : "",
+			   (tmp & EPxSTATUS_FIFO_DISABLE) ? " disable" : "",
+			   (tmp & EPxSTATUS_STAGE_ERROR) ? " ep0stat" : "");
+		if (seq_has_overflowed(m))
 			goto done;
 
 		if (list_empty(&ep->queue)) {
-			if (seq_puts(m, "\t(nothing queued)\n") < 0)
+			seq_puts(m, "\t(nothing queued)\n");
+			if (seq_has_overflowed(m))
 				goto done;
 			continue;
 		}
@@ -1187,10 +1198,10 @@ static int udc_proc_read(struct seq_file *m, void *v)
 			} else
 				tmp = req->req.actual;
 
-			if (seq_printf(m,
-				"\treq %p len %u/%u buf %p\n",
-				&req->req, tmp, req->req.length,
-				req->req.buf) < 0)
+			seq_printf(m, "\treq %p len %u/%u buf %p\n",
+				   &req->req, tmp, req->req.length,
+				   req->req.buf);
+			if (seq_has_overflowed(m))
 				goto done;
 		}
 	}
-- 
cgit v1.2.3-59-g8ed1b


From 3463d795bf0f8d9b32d4deabaaffcb81a1abb92b Mon Sep 17 00:00:00 2001
From: Fabian Frederick <fabf@skynet.be>
Date: Mon, 16 Mar 2015 20:20:27 +0100
Subject: usb: gadget: constify of_device_id array

of_device_id is always used as const.
(See driver.of_match_table and open firmware functions)

Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: Felipe Balbi <balbi@ti.com>
---
 drivers/usb/gadget/udc/pxa27x_udc.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/usb')

diff --git a/drivers/usb/gadget/udc/pxa27x_udc.c b/drivers/usb/gadget/udc/pxa27x_udc.c
index 486f7546de8c..b51226abade6 100644
--- a/drivers/usb/gadget/udc/pxa27x_udc.c
+++ b/drivers/usb/gadget/udc/pxa27x_udc.c
@@ -2387,7 +2387,7 @@ static struct pxa_udc memory = {
 };
 
 #if defined(CONFIG_OF)
-static struct of_device_id udc_pxa_dt_ids[] = {
+static const struct of_device_id udc_pxa_dt_ids[] = {
 	{ .compatible = "marvell,pxa270-udc" },
 	{}
 };
-- 
cgit v1.2.3-59-g8ed1b


From b48cb02de37976ad2ebef201ad40aa40156f6daa Mon Sep 17 00:00:00 2001
From: John Youn <John.Youn@synopsys.com>
Date: Mon, 16 Mar 2015 18:10:02 -0700
Subject: usb: dwc2: pci: Correctly compile dwc2-pci as a module or built-in

The dwc2-pci driver should be compiled as a module when configured to
do so. If the dwc2-pci is configured as a module but actually
built-in, it can cause build errors due to the fact that the
generic-phy will be allowed to compile as a module causing undefined
references.

Reported-by: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: John Youn <johnyoun@synopsys.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
---
 drivers/usb/dwc2/Makefile | 6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

(limited to 'drivers/usb')

diff --git a/drivers/usb/dwc2/Makefile b/drivers/usb/dwc2/Makefile
index 8f752679752a..f07b425eaff3 100644
--- a/drivers/usb/dwc2/Makefile
+++ b/drivers/usb/dwc2/Makefile
@@ -19,10 +19,8 @@ endif
 # mode. The PCI bus interface module will called dwc2_pci.ko and the platform
 # interface module will be called dwc2_platform.ko.
 
-ifneq ($(CONFIG_USB_DWC2_PCI),)
-	obj-$(CONFIG_USB_DWC2)		+= dwc2_pci.o
-	dwc2_pci-y			:= pci.o
-endif
+obj-$(CONFIG_USB_DWC2_PCI)		+= dwc2_pci.o
+dwc2_pci-y				:= pci.o
 
 obj-$(CONFIG_USB_DWC2_PLATFORM)		+= dwc2_platform.o
 dwc2_platform-y				:= platform.o
-- 
cgit v1.2.3-59-g8ed1b


From a3dd3befd7cb7d445fcb7c51cd922bf89afe0762 Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben.dooks@codethink.co.uk>
Date: Wed, 18 Mar 2015 15:53:09 +0000
Subject: usb: gadget: atmel_usba: use endian agnostic IO on ARM

Change from using the __raw IO accesors to the endian agnostic versions
of readl/writel_relaxed when not on AVR32. This fixes issues with running
big endian on ARMv7.

Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
--
CC: Nicolas Ferre <nicolas.ferre@atmel.com>
CC: Felipe Balbi <balbi@ti.com>
CC: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
CC: linux-usb@vger.kernel.org
Signed-off-by: Felipe Balbi <balbi@ti.com>
---
 drivers/usb/gadget/udc/atmel_usba_udc.c |  4 ++--
 drivers/usb/gadget/udc/atmel_usba_udc.h | 22 ++++++++++++++++------
 2 files changed, 18 insertions(+), 8 deletions(-)

(limited to 'drivers/usb')

diff --git a/drivers/usb/gadget/udc/atmel_usba_udc.c b/drivers/usb/gadget/udc/atmel_usba_udc.c
index d019b6c9d74d..4c01953a0869 100644
--- a/drivers/usb/gadget/udc/atmel_usba_udc.c
+++ b/drivers/usb/gadget/udc/atmel_usba_udc.c
@@ -152,7 +152,7 @@ static int regs_dbg_open(struct inode *inode, struct file *file)
 
 	spin_lock_irq(&udc->lock);
 	for (i = 0; i < inode->i_size / 4; i++)
-		data[i] = __raw_readl(udc->regs + i * 4);
+		data[i] = usba_io_readl(udc->regs + i * 4);
 	spin_unlock_irq(&udc->lock);
 
 	file->private_data = data;
@@ -1249,7 +1249,7 @@ static int handle_ep0_setup(struct usba_udc *udc, struct usba_ep *ep,
 		if (crq->wLength != cpu_to_le16(sizeof(status)))
 			goto stall;
 		ep->state = DATA_STAGE_IN;
-		__raw_writew(status, ep->fifo);
+		usba_io_writew(status, ep->fifo);
 		usba_ep_writel(ep, SET_STA, USBA_TX_PK_RDY);
 		break;
 	}
diff --git a/drivers/usb/gadget/udc/atmel_usba_udc.h b/drivers/usb/gadget/udc/atmel_usba_udc.h
index 085749a649e1..ea448a344767 100644
--- a/drivers/usb/gadget/udc/atmel_usba_udc.h
+++ b/drivers/usb/gadget/udc/atmel_usba_udc.h
@@ -191,18 +191,28 @@
 	 | USBA_BF(name, value))
 
 /* Register access macros */
+#ifdef CONFIG_AVR32
+#define usba_io_readl	__raw_readl
+#define usba_io_writel	__raw_writel
+#define usba_io_writew	__raw_writew
+#else
+#define usba_io_readl	readl_relaxed
+#define usba_io_writel	writel_relaxed
+#define usba_io_writew	writew_relaxed
+#endif
+
 #define usba_readl(udc, reg)					\
-	__raw_readl((udc)->regs + USBA_##reg)
+	usba_io_readl((udc)->regs + USBA_##reg)
 #define usba_writel(udc, reg, value)				\
-	__raw_writel((value), (udc)->regs + USBA_##reg)
+	usba_io_writel((value), (udc)->regs + USBA_##reg)
 #define usba_ep_readl(ep, reg)					\
-	__raw_readl((ep)->ep_regs + USBA_EPT_##reg)
+	usba_io_readl((ep)->ep_regs + USBA_EPT_##reg)
 #define usba_ep_writel(ep, reg, value)				\
-	__raw_writel((value), (ep)->ep_regs + USBA_EPT_##reg)
+	usba_io_writel((value), (ep)->ep_regs + USBA_EPT_##reg)
 #define usba_dma_readl(ep, reg)					\
-	__raw_readl((ep)->dma_regs + USBA_DMA_##reg)
+	usba_io_readl((ep)->dma_regs + USBA_DMA_##reg)
 #define usba_dma_writel(ep, reg, value)				\
-	__raw_writel((value), (ep)->dma_regs + USBA_DMA_##reg)
+	usba_io_writel((value), (ep)->dma_regs + USBA_DMA_##reg)
 
 /* Calculate base address for a given endpoint or DMA controller */
 #define USBA_EPT_BASE(x)	(0x100 + (x) * 0x20)
-- 
cgit v1.2.3-59-g8ed1b


From f4b4976b6e3171d408d0f6e08b12189bf60d1d22 Mon Sep 17 00:00:00 2001
From: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
Date: Tue, 24 Mar 2015 10:58:16 +0100
Subject: usb: gadget: f_printer: fix dependencies

If f_printer is selected without legacy g_printer, it should
depend on USB_CONFIGFS which pulls in libcomposite.

Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
---
 drivers/usb/gadget/Kconfig | 1 +
 1 file changed, 1 insertion(+)

(limited to 'drivers/usb')

diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig
index 3bb0e67fded2..bcf83c0a6e62 100644
--- a/drivers/usb/gadget/Kconfig
+++ b/drivers/usb/gadget/Kconfig
@@ -440,6 +440,7 @@ config USB_CONFIGFS_F_UVC
 config USB_CONFIGFS_F_PRINTER
 	bool "Printer function"
 	select USB_F_PRINTER
+	depends on USB_CONFIGFS
 	help
 	  The Printer function channels data between the USB host and a
 	  userspace program driving the print engine. The user space
-- 
cgit v1.2.3-59-g8ed1b


From 1ea276cbfc0201c9804f38474f3ec2c4488a2fc6 Mon Sep 17 00:00:00 2001
From: "Ivan T. Ivanov" <ivan.ivanov@linaro.org>
Date: Sat, 21 Mar 2015 15:25:52 +0200
Subject: usb: phy: Fix USB_ULPI_VIEWPORT Kconfig dependency

USB_ULPI_VIEWPORT didn't depend on USB_ULPI, while USB_ULPI
is using non user selectable USB_ULPI_VIEWPORT. Fix this.

Signed-off-by: Ivan T. Ivanov <ivan.ivanov@linaro.org>
Signed-off-by: Felipe Balbi <balbi@ti.com>
---
 drivers/usb/phy/Kconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/usb')

diff --git a/drivers/usb/phy/Kconfig b/drivers/usb/phy/Kconfig
index 2fb3828b5089..2175678e674e 100644
--- a/drivers/usb/phy/Kconfig
+++ b/drivers/usb/phy/Kconfig
@@ -202,13 +202,13 @@ config USB_RCAR_GEN2_PHY
 config USB_ULPI
 	bool "Generic ULPI Transceiver Driver"
 	depends on ARM || ARM64
+	select USB_ULPI_VIEWPORT
 	help
 	  Enable this to support ULPI connected USB OTG transceivers which
 	  are likely found on embedded boards.
 
 config USB_ULPI_VIEWPORT
 	bool
-	depends on USB_ULPI
 	help
 	  Provides read/write operations to the ULPI phy register set for
 	  controllers with a viewport register (e.g. Chipidea/ARC controllers).
-- 
cgit v1.2.3-59-g8ed1b


From 3e457371f436e89ce9239674828f9729a36b2595 Mon Sep 17 00:00:00 2001
From: Tony Lindgren <tony@atomide.com>
Date: Thu, 19 Mar 2015 17:10:16 -0700
Subject: usb: musb: Fix fifo reads for dm816x with musb_dsps

Looks like dm81xx can only do 32-bit fifo reads like am35x. Let's set
up musb-dsps with a custom read_fifo function based on the compatible
flag.

Otherwise we can get the following errors when starting dhclient on a
asix USB Ethernet adapter:

asix 2-1:1.0 eth2: asix_rx_fixup() Bad Header Length 0xffff003c, offset 4

While at it, let's also remove pointless cast of the driver data.

Cc: Bin Liu <binmlist@gmail.com>
Cc: Brian Hutchinson <b.hutchman@gmail.com>
Cc: George Cherian <george.cherian@ti.com>
Cc: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
---
 drivers/usb/musb/musb_dsps.c | 25 ++++++++++++++++++++++++-
 1 file changed, 24 insertions(+), 1 deletion(-)

(limited to 'drivers/usb')

diff --git a/drivers/usb/musb/musb_dsps.c b/drivers/usb/musb/musb_dsps.c
index 09648b4e40c2..b23ad150a165 100644
--- a/drivers/usb/musb/musb_dsps.c
+++ b/drivers/usb/musb/musb_dsps.c
@@ -615,6 +615,24 @@ static int dsps_musb_recover(struct musb *musb)
 	return session_restart ? 0 : -EPIPE;
 }
 
+/* Similar to am35x, dm81xx support only 32-bit read operation */
+static void dsps_read_fifo32(struct musb_hw_ep *hw_ep, u16 len, u8 *dst)
+{
+	void __iomem *fifo = hw_ep->fifo;
+
+	if (len >= 4) {
+		readsl(fifo, dst, len >> 2);
+		dst += len & ~0x03;
+		len &= 0x03;
+	}
+
+	/* Read any remaining 1 to 3 bytes */
+	if (len > 0) {
+		u32 val = musb_readl(fifo, 0);
+		memcpy(dst, &val, len);
+	}
+}
+
 static struct musb_platform_ops dsps_ops = {
 	.quirks		= MUSB_INDEXED_EP,
 	.init		= dsps_musb_init,
@@ -761,6 +779,9 @@ static int dsps_probe(struct platform_device *pdev)
 	}
 	wrp = match->data;
 
+	if (of_device_is_compatible(pdev->dev.of_node, "ti,musb-dm816"))
+		dsps_ops.read_fifo = dsps_read_fifo32;
+
 	/* allocate glue */
 	glue = devm_kzalloc(&pdev->dev, sizeof(*glue), GFP_KERNEL);
 	if (!glue)
@@ -837,7 +858,9 @@ static const struct dsps_musb_wrapper am33xx_driver_data = {
 
 static const struct of_device_id musb_dsps_of_match[] = {
 	{ .compatible = "ti,musb-am33xx",
-		.data = (void *) &am33xx_driver_data, },
+		.data = &am33xx_driver_data, },
+	{ .compatible = "ti,musb-dm816",
+		.data = &am33xx_driver_data, },
 	{  },
 };
 MODULE_DEVICE_TABLE(of, musb_dsps_of_match);
-- 
cgit v1.2.3-59-g8ed1b


From 1fcefbdf06708a5811ffa8acc949714aee60ae13 Mon Sep 17 00:00:00 2001
From: kbuild test robot <fengguang.wu@intel.com>
Date: Wed, 25 Mar 2015 07:23:52 +0100
Subject: usb: chipidea: usbmisc_imx: fix returnvar.cocci warnings

drivers/usb/chipidea/usbmisc_imx.c:277:5-8: Unneeded variable: "ret". Return "0" on line 297

 Removes unneeded variable used to store return value.

Generated by: scripts/coccinelle/misc/returnvar.cocci

Cc: Julia Lawall <julia.lawall@lip6.fr>
Signed-off-by: Peter Chen <peter.chen@freescale.com>
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/chipidea/usbmisc_imx.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

(limited to 'drivers/usb')

diff --git a/drivers/usb/chipidea/usbmisc_imx.c b/drivers/usb/chipidea/usbmisc_imx.c
index 8af070f15d3e..140945cb124f 100644
--- a/drivers/usb/chipidea/usbmisc_imx.c
+++ b/drivers/usb/chipidea/usbmisc_imx.c
@@ -274,7 +274,6 @@ static int usbmisc_imx6sx_init(struct imx_usbmisc_data *data)
 	unsigned long flags;
 	struct imx_usbmisc *usbmisc = dev_get_drvdata(data->dev);
 	u32 val;
-	int ret = 0;
 
 	usbmisc_imx6q_init(data);
 
@@ -294,7 +293,7 @@ static int usbmisc_imx6sx_init(struct imx_usbmisc_data *data)
 		spin_unlock_irqrestore(&usbmisc->lock, flags);
 	}
 
-	return ret;
+	return 0;
 }
 
 static int usbmisc_vf610_init(struct imx_usbmisc_data *data)
-- 
cgit v1.2.3-59-g8ed1b


From 66e3e591891da9899a8990792da080432531ffd4 Mon Sep 17 00:00:00 2001
From: Keith Packard <keithp@keithp.com>
Date: Thu, 19 Mar 2015 20:36:49 -0700
Subject: usb: Add driver for Altus Metrum ChaosKey device (v2)

This is a hardware random number generator. The driver provides both a
/dev/chaoskeyX entry and hooks the entropy source up to the kernel
hwrng interface. More information about the device can be found at
http://chaoskey.org

The USB ID for ChaosKey was allocated from the OpenMoko USB vendor
space and is visible as 'USBtrng' here:

http://wiki.openmoko.org/wiki/USB_Product_IDs

v2: Respond to review from Oliver Neukum <oneukum@suse.de>

 * Delete extensive debug infrastructure and replace it with calls to
   dev_dbg.

 * Allocate I/O buffer separately from device structure to obey
   requirements for non-coherant architectures.

 * Initialize mutexes before registering device to ensure that open
   cannot be invoked before the device is ready to proceed.

 * Return number of bytes read instead of -EINTR when partial read
   operation is aborted due to a signal.

 * Make sure device mutex is unlocked in read error paths.

 * Add MAINTAINERS entry for the driver

Signed-off-by: Keith Packard <keithp@keithp.com>
Cc: Oliver Neukum <oneukum@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 MAINTAINERS                 |   6 +
 drivers/usb/misc/Kconfig    |  12 +
 drivers/usb/misc/Makefile   |   1 +
 drivers/usb/misc/chaoskey.c | 530 ++++++++++++++++++++++++++++++++++++++++++++
 4 files changed, 549 insertions(+)
 create mode 100644 drivers/usb/misc/chaoskey.c

(limited to 'drivers/usb')

diff --git a/MAINTAINERS b/MAINTAINERS
index 358eb0105e00..059a9d4e8a51 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -10129,6 +10129,12 @@ S:	Maintained
 F:	drivers/net/usb/cdc_*.c
 F:	include/uapi/linux/usb/cdc.h
 
+USB CHAOSKEY DRIVER
+M:	Keith Packard <keithp@keithp.com>
+L:	linux-usb@vger.kernel.org
+S:	Maintained
+F:	drivers/usb/misc/chaoskey.c
+
 USB CYPRESS C67X00 DRIVER
 M:	Peter Korsgaard <jacmet@sunsite.dk>
 L:	linux-usb@vger.kernel.org
diff --git a/drivers/usb/misc/Kconfig b/drivers/usb/misc/Kconfig
index 76d77206e011..8c331f1dfd23 100644
--- a/drivers/usb/misc/Kconfig
+++ b/drivers/usb/misc/Kconfig
@@ -255,3 +255,15 @@ config USB_LINK_LAYER_TEST
 	  This driver is for generating specific traffic for Super Speed Link
 	  Layer Test Device. Say Y only when you want to conduct USB Super Speed
 	  Link Layer Test for host controllers.
+
+config USB_CHAOSKEY
+	tristate "ChaosKey random number generator driver support"
+	help
+	  Say Y here if you want to connect an AltusMetrum ChaosKey to
+	  your computer's USB port. The ChaosKey is a hardware random
+	  number generator which hooks into the kernel entropy pool to
+	  ensure a large supply of entropy for /dev/random and
+	  /dev/urandom and also provides direct access via /dev/chaoskeyX
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called chaoskey.
diff --git a/drivers/usb/misc/Makefile b/drivers/usb/misc/Makefile
index 65b0402c1ca1..45fd4ac39d3e 100644
--- a/drivers/usb/misc/Makefile
+++ b/drivers/usb/misc/Makefile
@@ -25,6 +25,7 @@ obj-$(CONFIG_USB_USS720)		+= uss720.o
 obj-$(CONFIG_USB_SEVSEG)		+= usbsevseg.o
 obj-$(CONFIG_USB_YUREX)			+= yurex.o
 obj-$(CONFIG_USB_HSIC_USB3503)		+= usb3503.o
+obj-$(CONFIG_USB_CHAOSKEY)		+= chaoskey.o
 
 obj-$(CONFIG_USB_SISUSBVGA)		+= sisusbvga/
 obj-$(CONFIG_USB_LINK_LAYER_TEST)	+= lvstest.o
diff --git a/drivers/usb/misc/chaoskey.c b/drivers/usb/misc/chaoskey.c
new file mode 100644
index 000000000000..ef80ce9452a4
--- /dev/null
+++ b/drivers/usb/misc/chaoskey.c
@@ -0,0 +1,530 @@
+/*
+ * chaoskey - driver for ChaosKey device from Altus Metrum.
+ *
+ * This device provides true random numbers using a noise source based
+ * on a reverse-biased p-n junction in avalanche breakdown. More
+ * details can be found at http://chaoskey.org
+ *
+ * The driver connects to the kernel hardware RNG interface to provide
+ * entropy for /dev/random and other kernel activities. It also offers
+ * a separate /dev/ entry to allow for direct access to the random
+ * bit stream.
+ *
+ * Copyright © 2015 Keith Packard <keithp@keithp.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the GNU
+ * General Public License for more details.
+ */
+
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/usb.h>
+#include <linux/wait.h>
+#include <linux/hw_random.h>
+
+static struct usb_driver chaoskey_driver;
+static struct usb_class_driver chaoskey_class;
+static int chaoskey_rng_read(struct hwrng *rng, void *data,
+			     size_t max, bool wait);
+
+#define usb_dbg(usb_if, format, arg...) \
+	dev_dbg(&(usb_if)->dev, format, ## arg)
+
+#define usb_err(usb_if, format, arg...) \
+	dev_err(&(usb_if)->dev, format, ## arg)
+
+/* Version Information */
+#define DRIVER_VERSION	"v0.1"
+#define DRIVER_AUTHOR	"Keith Packard, keithp@keithp.com"
+#define DRIVER_DESC	"Altus Metrum ChaosKey driver"
+#define DRIVER_SHORT	"chaoskey"
+
+MODULE_VERSION(DRIVER_VERSION);
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("GPL");
+
+#define CHAOSKEY_VENDOR_ID	0x1d50	/* OpenMoko */
+#define CHAOSKEY_PRODUCT_ID	0x60c6	/* ChaosKey */
+
+#define CHAOSKEY_BUF_LEN	64	/* max size of USB full speed packet */
+
+#define NAK_TIMEOUT (HZ)		/* stall/wait timeout for device */
+
+#ifdef CONFIG_USB_DYNAMIC_MINORS
+#define USB_CHAOSKEY_MINOR_BASE 0
+#else
+
+/* IOWARRIOR_MINOR_BASE + 16, not official yet */
+#define USB_CHAOSKEY_MINOR_BASE 224
+#endif
+
+static const struct usb_device_id chaoskey_table[] = {
+	{ USB_DEVICE(CHAOSKEY_VENDOR_ID, CHAOSKEY_PRODUCT_ID) },
+	{ },
+};
+MODULE_DEVICE_TABLE(usb, chaoskey_table);
+
+/* Driver-local specific stuff */
+struct chaoskey {
+	struct usb_interface *interface;
+	char in_ep;
+	struct mutex lock;
+	struct mutex rng_lock;
+	int open;			/* open count */
+	int present;			/* device not disconnected */
+	int size;			/* size of buf */
+	int valid;			/* bytes of buf read */
+	int used;			/* bytes of buf consumed */
+	char *name;			/* product + serial */
+	struct hwrng hwrng;		/* Embedded struct for hwrng */
+	int hwrng_registered;		/* registered with hwrng API */
+	wait_queue_head_t wait_q;	/* for timeouts */
+	char *buf;
+};
+
+static void chaoskey_free(struct chaoskey *dev)
+{
+	usb_dbg(dev->interface, "free");
+	kfree(dev->name);
+	kfree(dev->buf);
+	kfree(dev);
+}
+
+static int chaoskey_probe(struct usb_interface *interface,
+			  const struct usb_device_id *id)
+{
+	struct usb_device *udev = interface_to_usbdev(interface);
+	struct usb_host_interface *altsetting = interface->cur_altsetting;
+	int i;
+	int in_ep = -1;
+	struct chaoskey *dev;
+	int result;
+	int size;
+
+	usb_dbg(interface, "probe %s-%s", udev->product, udev->serial);
+
+	/* Find the first bulk IN endpoint and its packet size */
+	for (i = 0; i < altsetting->desc.bNumEndpoints; i++) {
+		if (usb_endpoint_is_bulk_in(&altsetting->endpoint[i].desc)) {
+			in_ep = altsetting->endpoint[i].desc.bEndpointAddress;
+			size = altsetting->endpoint[i].desc.wMaxPacketSize;
+			break;
+		}
+	}
+
+	/* Validate endpoint and size */
+	if (in_ep == -1) {
+		usb_dbg(interface, "no IN endpoint found");
+		return -ENODEV;
+	}
+	if (size <= 0) {
+		usb_dbg(interface, "invalid size (%d)", size);
+		return -ENODEV;
+	}
+
+	if (size > CHAOSKEY_BUF_LEN) {
+		usb_dbg(interface, "size reduced from %d to %d\n",
+			size, CHAOSKEY_BUF_LEN);
+		size = CHAOSKEY_BUF_LEN;
+	}
+
+	/* Looks good, allocate and initialize */
+
+	dev = kzalloc(sizeof(struct chaoskey), GFP_KERNEL);
+
+	if (dev == NULL)
+		return -ENOMEM;
+
+	dev->buf = kmalloc(size, GFP_KERNEL);
+
+	if (dev->buf == NULL) {
+		kfree(dev);
+		return -ENOMEM;
+	}
+
+	/* Construct a name using the product and serial values. Each
+	 * device needs a unique name for the hwrng code
+	 */
+
+	if (udev->product && udev->serial) {
+		dev->name = kmalloc(strlen(udev->product) + 1 +
+				    strlen(udev->serial) + 1, GFP_KERNEL);
+		if (dev->name == NULL) {
+			kfree(dev->buf);
+			kfree(dev);
+			return -ENOMEM;
+		}
+
+		strcpy(dev->name, udev->product);
+		strcat(dev->name, "-");
+		strcat(dev->name, udev->serial);
+	}
+
+	dev->interface = interface;
+
+	dev->in_ep = in_ep;
+
+	dev->size = size;
+	dev->present = 1;
+
+	init_waitqueue_head(&dev->wait_q);
+
+	mutex_init(&dev->lock);
+	mutex_init(&dev->rng_lock);
+
+	usb_set_intfdata(interface, dev);
+
+	result = usb_register_dev(interface, &chaoskey_class);
+	if (result) {
+		usb_err(interface, "Unable to allocate minor number.");
+		usb_set_intfdata(interface, NULL);
+		chaoskey_free(dev);
+		return result;
+	}
+
+	dev->hwrng.name = dev->name ? dev->name : chaoskey_driver.name;
+	dev->hwrng.read = chaoskey_rng_read;
+
+	/* Set the 'quality' metric.  Quality is measured in units of
+	 * 1/1024's of a bit ("mills"). This should be set to 1024,
+	 * but there is a bug in the hwrng core which masks it with
+	 * 1023.
+	 *
+	 * The patch that has been merged to the crypto development
+	 * tree for that bug limits the value to 1024 at most, so by
+	 * setting this to 1024 + 1023, we get 1023 before the fix is
+	 * merged and 1024 afterwards. We'll patch this driver once
+	 * both bits of code are in the same tree.
+	 */
+	dev->hwrng.quality = 1024 + 1023;
+
+	dev->hwrng_registered = (hwrng_register(&dev->hwrng) == 0);
+	if (!dev->hwrng_registered)
+		usb_err(interface, "Unable to register with hwrng");
+
+	usb_enable_autosuspend(udev);
+
+	usb_dbg(interface, "chaoskey probe success, size %d", dev->size);
+	return 0;
+}
+
+static void chaoskey_disconnect(struct usb_interface *interface)
+{
+	struct chaoskey	*dev;
+
+	usb_dbg(interface, "disconnect");
+	dev = usb_get_intfdata(interface);
+	if (!dev) {
+		usb_dbg(interface, "disconnect failed - no dev");
+		return;
+	}
+
+	if (dev->hwrng_registered)
+		hwrng_unregister(&dev->hwrng);
+
+	usb_deregister_dev(interface, &chaoskey_class);
+
+	usb_set_intfdata(interface, NULL);
+	mutex_lock(&dev->lock);
+
+	dev->present = 0;
+
+	if (!dev->open) {
+		mutex_unlock(&dev->lock);
+		chaoskey_free(dev);
+	} else
+		mutex_unlock(&dev->lock);
+
+	usb_dbg(interface, "disconnect done");
+}
+
+static int chaoskey_open(struct inode *inode, struct file *file)
+{
+	struct chaoskey *dev;
+	struct usb_interface *interface;
+
+	/* get the interface from minor number and driver information */
+	interface = usb_find_interface(&chaoskey_driver, iminor(inode));
+	if (!interface)
+		return -ENODEV;
+
+	usb_dbg(interface, "open");
+
+	dev = usb_get_intfdata(interface);
+	if (!dev) {
+		usb_dbg(interface, "open (dev)");
+		return -ENODEV;
+	}
+
+	file->private_data = dev;
+	mutex_lock(&dev->lock);
+	++dev->open;
+	mutex_unlock(&dev->lock);
+
+	usb_dbg(interface, "open success");
+	return 0;
+}
+
+static int chaoskey_release(struct inode *inode, struct file *file)
+{
+	struct chaoskey *dev = file->private_data;
+	struct usb_interface *interface;
+
+	if (dev == NULL)
+		return -ENODEV;
+
+	interface = dev->interface;
+
+	usb_dbg(interface, "release");
+
+	mutex_lock(&dev->lock);
+
+	usb_dbg(interface, "open count at release is %d", dev->open);
+
+	if (dev->open <= 0) {
+		usb_dbg(interface, "invalid open count (%d)", dev->open);
+		mutex_unlock(&dev->lock);
+		return -ENODEV;
+	}
+
+	--dev->open;
+
+	if (!dev->present) {
+		if (dev->open == 0) {
+			mutex_unlock(&dev->lock);
+			chaoskey_free(dev);
+		} else
+			mutex_unlock(&dev->lock);
+	} else
+		mutex_unlock(&dev->lock);
+
+	usb_dbg(interface, "release success");
+	return 0;
+}
+
+/* Fill the buffer. Called with dev->lock held
+ */
+static int _chaoskey_fill(struct chaoskey *dev)
+{
+	DEFINE_WAIT(wait);
+	int result;
+	int this_read;
+	struct usb_device *udev = interface_to_usbdev(dev->interface);
+
+	usb_dbg(dev->interface, "fill");
+
+	/* Return immediately if someone called before the buffer was
+	 * empty */
+	if (dev->valid != dev->used) {
+		usb_dbg(dev->interface, "not empty yet (valid %d used %d)",
+			dev->valid, dev->used);
+		return 0;
+	}
+
+	/* Bail if the device has been removed */
+	if (!dev->present) {
+		usb_dbg(dev->interface, "device not present");
+		return -ENODEV;
+	}
+
+	/* Make sure the device is awake */
+	result = usb_autopm_get_interface(dev->interface);
+	if (result) {
+		usb_dbg(dev->interface, "wakeup failed (result %d)", result);
+		return result;
+	}
+
+	result = usb_bulk_msg(udev,
+			      usb_rcvbulkpipe(udev, dev->in_ep),
+			      dev->buf, dev->size, &this_read,
+			      NAK_TIMEOUT);
+
+	/* Let the device go back to sleep eventually */
+	usb_autopm_put_interface(dev->interface);
+
+	if (result == 0) {
+		dev->valid = this_read;
+		dev->used = 0;
+	}
+
+	usb_dbg(dev->interface, "bulk_msg result %d this_read %d",
+		result, this_read);
+
+	return result;
+}
+
+static ssize_t chaoskey_read(struct file *file,
+			     char __user *buffer,
+			     size_t count,
+			     loff_t *ppos)
+{
+	struct chaoskey *dev;
+	ssize_t read_count = 0;
+	int this_time;
+	int result = 0;
+	unsigned long remain;
+
+	dev = file->private_data;
+
+	if (dev == NULL || !dev->present)
+		return -ENODEV;
+
+	usb_dbg(dev->interface, "read %zu", count);
+
+	while (count > 0) {
+
+		/* Grab the rng_lock briefly to ensure that the hwrng interface
+		 * gets priority over other user access
+		 */
+		result = mutex_lock_interruptible(&dev->rng_lock);
+		if (result)
+			goto bail;
+		mutex_unlock(&dev->rng_lock);
+
+		result = mutex_lock_interruptible(&dev->lock);
+		if (result)
+			goto bail;
+		if (dev->valid == dev->used) {
+			result = _chaoskey_fill(dev);
+			if (result) {
+				mutex_unlock(&dev->lock);
+				goto bail;
+			}
+
+			/* Read returned zero bytes */
+			if (dev->used == dev->valid) {
+				mutex_unlock(&dev->lock);
+				goto bail;
+			}
+		}
+
+		this_time = dev->valid - dev->used;
+		if (this_time > count)
+			this_time = count;
+
+		remain = copy_to_user(buffer, dev->buf + dev->used, this_time);
+		if (remain) {
+			result = -EFAULT;
+
+			/* Consume the bytes that were copied so we don't leak
+			 * data to user space
+			 */
+			dev->used += this_time - remain;
+			mutex_unlock(&dev->lock);
+			goto bail;
+		}
+
+		count -= this_time;
+		read_count += this_time;
+		buffer += this_time;
+		dev->used += this_time;
+		mutex_unlock(&dev->lock);
+	}
+bail:
+	if (read_count) {
+		usb_dbg(dev->interface, "read %zu bytes", read_count);
+		return read_count;
+	}
+	usb_dbg(dev->interface, "empty read, result %d", result);
+	return result;
+}
+
+static int chaoskey_rng_read(struct hwrng *rng, void *data,
+			     size_t max, bool wait)
+{
+	struct chaoskey *dev = container_of(rng, struct chaoskey, hwrng);
+	int this_time;
+
+	usb_dbg(dev->interface, "rng_read max %zu wait %d", max, wait);
+
+	if (!dev->present) {
+		usb_dbg(dev->interface, "device not present");
+		return 0;
+	}
+
+	/* Hold the rng_lock until we acquire the device lock so that
+	 * this operation gets priority over other user access to the
+	 * device
+	 */
+	mutex_lock(&dev->rng_lock);
+
+	mutex_lock(&dev->lock);
+
+	mutex_unlock(&dev->rng_lock);
+
+	/* Try to fill the buffer if empty. It doesn't actually matter
+	 * if _chaoskey_fill works; we'll just return zero bytes as
+	 * the buffer will still be empty
+	 */
+	if (dev->valid == dev->used)
+		(void) _chaoskey_fill(dev);
+
+	this_time = dev->valid - dev->used;
+	if (this_time > max)
+		this_time = max;
+
+	memcpy(data, dev->buf, this_time);
+
+	dev->used += this_time;
+
+	mutex_unlock(&dev->lock);
+
+	usb_dbg(dev->interface, "rng_read this_time %d\n", this_time);
+	return this_time;
+}
+
+#ifdef CONFIG_PM
+static int chaoskey_suspend(struct usb_interface *interface,
+			    pm_message_t message)
+{
+	usb_dbg(interface, "suspend");
+	return 0;
+}
+
+static int chaoskey_resume(struct usb_interface *interface)
+{
+	usb_dbg(interface, "resume");
+	return 0;
+}
+#else
+#define chaoskey_suspend NULL
+#define chaoskey_resume NULL
+#endif
+
+/* file operation pointers */
+static const struct file_operations chaoskey_fops = {
+	.owner = THIS_MODULE,
+	.read = chaoskey_read,
+	.open = chaoskey_open,
+	.release = chaoskey_release,
+	.llseek = default_llseek,
+};
+
+/* class driver information */
+static struct usb_class_driver chaoskey_class = {
+	.name = "chaoskey%d",
+	.fops = &chaoskey_fops,
+	.minor_base = USB_CHAOSKEY_MINOR_BASE,
+};
+
+/* usb specific object needed to register this driver with the usb subsystem */
+static struct usb_driver chaoskey_driver = {
+	.name = DRIVER_SHORT,
+	.probe = chaoskey_probe,
+	.disconnect = chaoskey_disconnect,
+	.suspend = chaoskey_suspend,
+	.resume = chaoskey_resume,
+	.reset_resume = chaoskey_resume,
+	.id_table = chaoskey_table,
+	.supports_autosuspend = 1,
+};
+
+module_usb_driver(chaoskey_driver);
+
-- 
cgit v1.2.3-59-g8ed1b


From 1da47f54ddaf99d2fa8b4319480d49b88ff5fc2c Mon Sep 17 00:00:00 2001
From: Viresh Kumar <viresh.kumar@linaro.org>
Date: Fri, 20 Mar 2015 09:04:40 +0530
Subject: USB: Use usb_disabled() consistently

At few places we have used usb_disabled() and at other places used 'nousb'
directly. Lets be consistent and use usb_disabled();

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/core/usb.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'drivers/usb')

diff --git a/drivers/usb/core/usb.c b/drivers/usb/core/usb.c
index b1fb9aef0f5b..006951728520 100644
--- a/drivers/usb/core/usb.c
+++ b/drivers/usb/core/usb.c
@@ -1045,7 +1045,7 @@ static void usb_debugfs_cleanup(void)
 static int __init usb_init(void)
 {
 	int retval;
-	if (nousb) {
+	if (usb_disabled()) {
 		pr_info("%s: USB support disabled\n", usbcore_name);
 		return 0;
 	}
@@ -1102,7 +1102,7 @@ out:
 static void __exit usb_exit(void)
 {
 	/* This will matter if shutdown/reboot does exitcalls. */
-	if (nousb)
+	if (usb_disabled())
 		return;
 
 	usb_deregister_device_driver(&usb_generic_driver);
-- 
cgit v1.2.3-59-g8ed1b


From bb3247a34257a271b32d43244eabf71198f40ff0 Mon Sep 17 00:00:00 2001
From: Viresh Kumar <viresh.kumar@linaro.org>
Date: Fri, 20 Mar 2015 09:04:41 +0530
Subject: USB: Move usb_disabled() towards top of the file

Move usb_disabled() and module_param()/core_param() towards the top of the file,
where 'nousb' is defined, as they are all related.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/core/usb.c | 32 ++++++++++++++++----------------
 1 file changed, 16 insertions(+), 16 deletions(-)

(limited to 'drivers/usb')

diff --git a/drivers/usb/core/usb.c b/drivers/usb/core/usb.c
index 006951728520..8d5b2f4113cd 100644
--- a/drivers/usb/core/usb.c
+++ b/drivers/usb/core/usb.c
@@ -49,6 +49,22 @@ const char *usbcore_name = "usbcore";
 
 static bool nousb;	/* Disable USB when built into kernel image */
 
+/* To disable USB, kernel command line is 'nousb' not 'usbcore.nousb' */
+#ifdef MODULE
+module_param(nousb, bool, 0444);
+#else
+core_param(nousb, nousb, bool, 0444);
+#endif
+
+/*
+ * for external read access to <nousb>
+ */
+int usb_disabled(void)
+{
+	return nousb;
+}
+EXPORT_SYMBOL_GPL(usb_disabled);
+
 #ifdef	CONFIG_PM
 static int usb_autosuspend_delay = 2;		/* Default delay value,
 						 * in seconds */
@@ -964,22 +980,6 @@ void usb_buffer_unmap_sg(const struct usb_device *dev, int is_in,
 EXPORT_SYMBOL_GPL(usb_buffer_unmap_sg);
 #endif
 
-/* To disable USB, kernel command line is 'nousb' not 'usbcore.nousb' */
-#ifdef MODULE
-module_param(nousb, bool, 0444);
-#else
-core_param(nousb, nousb, bool, 0444);
-#endif
-
-/*
- * for external read access to <nousb>
- */
-int usb_disabled(void)
-{
-	return nousb;
-}
-EXPORT_SYMBOL_GPL(usb_disabled);
-
 /*
  * Notifications of device and interface registration
  */
-- 
cgit v1.2.3-59-g8ed1b


From 24677af8693647d611448651f7df3ddc3211aa83 Mon Sep 17 00:00:00 2001
From: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Date: Thu, 19 Mar 2015 15:01:07 +0100
Subject: usb: ehci-orion: add more constants for register values

This commit adds new register values for the USB_CMD and USB_MODE
registers, which allows to avoid the usage of a number of magic values
in orion_usb_phy_v1_setup().

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/host/ehci-orion.c | 18 ++++++++++++------
 1 file changed, 12 insertions(+), 6 deletions(-)

(limited to 'drivers/usb')

diff --git a/drivers/usb/host/ehci-orion.c b/drivers/usb/host/ehci-orion.c
index f6eafecab15c..bfcbb9aa8816 100644
--- a/drivers/usb/host/ehci-orion.c
+++ b/drivers/usb/host/ehci-orion.c
@@ -29,7 +29,13 @@
 #define wrl(off, val)	writel_relaxed((val), hcd->regs + (off))
 
 #define USB_CMD			0x140
+#define   USB_CMD_RUN		BIT(0)
+#define   USB_CMD_RESET		BIT(1)
 #define USB_MODE		0x1a8
+#define   USB_MODE_MASK		GENMASK(1, 0)
+#define   USB_MODE_DEVICE	0x2
+#define   USB_MODE_HOST		0x3
+#define   USB_MODE_SDIS		BIT(4)
 #define USB_CAUSE		0x310
 #define USB_MASK		0x314
 #define USB_WINDOW_CTRL(i)	(0x320 + ((i) << 4))
@@ -69,8 +75,8 @@ static void orion_usb_phy_v1_setup(struct usb_hcd *hcd)
 	/*
 	 * Reset controller
 	 */
-	wrl(USB_CMD, rdl(USB_CMD) | 0x2);
-	while (rdl(USB_CMD) & 0x2);
+	wrl(USB_CMD, rdl(USB_CMD) | USB_CMD_RESET);
+	while (rdl(USB_CMD) & USB_CMD_RESET);
 
 	/*
 	 * GL# USB-10: Set IPG for non start of frame packets
@@ -112,16 +118,16 @@ static void orion_usb_phy_v1_setup(struct usb_hcd *hcd)
 	/*
 	 * Stop and reset controller
 	 */
-	wrl(USB_CMD, rdl(USB_CMD) & ~0x1);
-	wrl(USB_CMD, rdl(USB_CMD) | 0x2);
-	while (rdl(USB_CMD) & 0x2);
+	wrl(USB_CMD, rdl(USB_CMD) & ~USB_CMD_RUN);
+	wrl(USB_CMD, rdl(USB_CMD) | USB_CMD_RESET);
+	while (rdl(USB_CMD) & USB_CMD_RESET);
 
 	/*
 	 * GL# USB-5 Streaming disable REG_USB_MODE[4]=1
 	 * TBD: This need to be done after each reset!
 	 * GL# USB-4 Setup USB Host mode
 	 */
-	wrl(USB_MODE, 0x13);
+	wrl(USB_MODE, USB_MODE_SDIS | USB_MODE_HOST);
 }
 
 static void
-- 
cgit v1.2.3-59-g8ed1b


From 76cb03e7d5d7ba49175784dce961696da66c44cc Mon Sep 17 00:00:00 2001
From: Oliver Neukum <oneukum@suse.de>
Date: Fri, 20 Mar 2015 14:28:56 +0100
Subject: cdc-wdm: return correct error codes

Lieing to user space is wrong. The real reason for a failure
to write should be returned to user space.

Signed-off-by: Oliver Neukum <oneukum@suse.de>0
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/class/cdc-wdm.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/usb')

diff --git a/drivers/usb/class/cdc-wdm.c b/drivers/usb/class/cdc-wdm.c
index a051a7a2b1bd..f053b41fae7f 100644
--- a/drivers/usb/class/cdc-wdm.c
+++ b/drivers/usb/class/cdc-wdm.c
@@ -339,7 +339,7 @@ static ssize_t wdm_write
 	desc->werr = 0;
 	spin_unlock_irq(&desc->iuspin);
 	if (we < 0)
-		return -EIO;
+		return usb_translate_errors(we);
 
 	buf = kmalloc(count, GFP_KERNEL);
 	if (!buf) {
-- 
cgit v1.2.3-59-g8ed1b


From c0ab6bb0597363532f178f3cd7b7fb527eef39e2 Mon Sep 17 00:00:00 2001
From: Ben Gamari <ben@smart-cactus.org>
Date: Wed, 18 Mar 2015 14:37:45 -0400
Subject: usb/misc/usb3503: Always read refclk frequency from DT

This is necessary to set REF_SEL appropriately in uses where refclk is
always available.

Signed-off-by: Ben Gamari <ben@smart-cactus.org>
Acked-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/misc/usb3503.c | 47 +++++++++++++++++++++++-----------------------
 1 file changed, 24 insertions(+), 23 deletions(-)

(limited to 'drivers/usb')

diff --git a/drivers/usb/misc/usb3503.c b/drivers/usb/misc/usb3503.c
index 258d2f546e43..64ff5b91752d 100644
--- a/drivers/usb/misc/usb3503.c
+++ b/drivers/usb/misc/usb3503.c
@@ -186,8 +186,31 @@ static int usb3503_probe(struct usb3503 *hub)
 		hub->mode		= pdata->initial_mode;
 	} else if (np) {
 		struct clk *clk;
+		u32 rate = 0;
 		hub->port_off_mask = 0;
 
+		if (!of_property_read_u32(np, "refclk-frequency", &rate)) {
+			switch (rate) {
+			case 38400000:
+			case 26000000:
+			case 19200000:
+			case 12000000:
+				hub->secondary_ref_clk = 0;
+				break;
+			case 24000000:
+			case 27000000:
+			case 25000000:
+			case 50000000:
+				hub->secondary_ref_clk = 1;
+				break;
+			default:
+				dev_err(dev,
+					"unsupported reference clock rate (%d)\n",
+					(int) rate);
+				return -EINVAL;
+			}
+		}
+
 		clk = devm_clk_get(dev, "refclk");
 		if (IS_ERR(clk) && PTR_ERR(clk) != -ENOENT) {
 			dev_err(dev, "unable to request refclk (%ld)\n",
@@ -196,31 +219,9 @@ static int usb3503_probe(struct usb3503 *hub)
 		}
 
 		if (!IS_ERR(clk)) {
-			u32 rate = 0;
 			hub->clk = clk;
 
-			if (!of_property_read_u32(np, "refclk-frequency",
-						 &rate)) {
-
-				switch (rate) {
-				case 38400000:
-				case 26000000:
-				case 19200000:
-				case 12000000:
-					hub->secondary_ref_clk = 0;
-					break;
-				case 24000000:
-				case 27000000:
-				case 25000000:
-				case 50000000:
-					hub->secondary_ref_clk = 1;
-					break;
-				default:
-					dev_err(dev,
-						"unsupported reference clock rate (%d)\n",
-						(int) rate);
-					return -EINVAL;
-				}
+			if (rate != 0) {
 				err = clk_set_rate(hub->clk, rate);
 				if (err) {
 					dev_err(dev,
-- 
cgit v1.2.3-59-g8ed1b


From 36e59e0d70d6150e7a2155c54612ea875e88ce8d Mon Sep 17 00:00:00 2001
From: Oliver Neukum <oneukum@suse.de>
Date: Fri, 20 Mar 2015 09:24:24 +0100
Subject: cdc-acm: fix race between callback and unthrottle

Abn URB may be may marked free only after the buffer has been
processed or there is a small window during which it could
be submitted on another CPU and overwrite an unprocessed buffer

Signed-off-by: Oliver Neukum <oneukum@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/class/cdc-acm.c | 12 ++++++++++--
 1 file changed, 10 insertions(+), 2 deletions(-)

(limited to 'drivers/usb')

diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c
index 683617714e7c..58241ec1e91d 100644
--- a/drivers/usb/class/cdc-acm.c
+++ b/drivers/usb/class/cdc-acm.c
@@ -417,25 +417,33 @@ static void acm_read_bulk_callback(struct urb *urb)
 	struct acm_rb *rb = urb->context;
 	struct acm *acm = rb->instance;
 	unsigned long flags;
+	int status = urb->status;
 
 	dev_vdbg(&acm->data->dev, "%s - urb %d, len %d\n", __func__,
 					rb->index, urb->actual_length);
-	set_bit(rb->index, &acm->read_urbs_free);
 
 	if (!acm->dev) {
+		set_bit(rb->index, &acm->read_urbs_free);
 		dev_dbg(&acm->data->dev, "%s - disconnected\n", __func__);
 		return;
 	}
 
 	if (urb->status) {
+		set_bit(rb->index, &acm->read_urbs_free);
 		dev_dbg(&acm->data->dev, "%s - non-zero urb status: %d\n",
-							__func__, urb->status);
+							__func__, status);
 		return;
 	}
 
 	usb_mark_last_busy(acm->dev);
 
 	acm_process_read_urb(acm, urb);
+	/*
+	 * Unthrottle may run on another CPU which needs to see events
+	 * in the same order. Submission has an implict barrier
+	 */
+	smp_mb__before_atomic();
+	set_bit(rb->index, &acm->read_urbs_free);
 
 	/* throttle device if requested by tty */
 	spin_lock_irqsave(&acm->read_lock, flags);
-- 
cgit v1.2.3-59-g8ed1b


From 6c8074e90c7350f5e38caf1e8d73e98df4115403 Mon Sep 17 00:00:00 2001
From: Oliver Neukum <oneukum@suse.de>
Date: Fri, 20 Mar 2015 11:25:17 +0100
Subject: cdc-acm: surpress misleading message

During the entry intro suspend a misleading message can be
printed. Surpress it by checking the specific error.

Signed-off-by: Oliver Neukum <oneukum@suse.de>0
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/class/cdc-acm.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/usb')

diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c
index 58241ec1e91d..43cb05863fac 100644
--- a/drivers/usb/class/cdc-acm.c
+++ b/drivers/usb/class/cdc-acm.c
@@ -360,7 +360,7 @@ static void acm_ctrl_irq(struct urb *urb)
 	}
 exit:
 	retval = usb_submit_urb(urb, GFP_ATOMIC);
-	if (retval)
+	if (retval && retval != -EPERM)
 		dev_err(&acm->control->dev, "%s - usb_submit_urb failed: %d\n",
 							__func__, retval);
 }
-- 
cgit v1.2.3-59-g8ed1b


From 4132cd02db180d018325e26bd145a509a14fcd6b Mon Sep 17 00:00:00 2001
From: Oliver Neukum <oneukum@suse.de>
Date: Fri, 20 Mar 2015 11:41:06 +0100
Subject: cdc-acm: convert to not directly using urb->status

A step on the road to passing status as a parameter

Signed-off-by: Oliver Neukum <oneukum@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/class/cdc-acm.c | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

(limited to 'drivers/usb')

diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c
index 43cb05863fac..3e15add665e2 100644
--- a/drivers/usb/class/cdc-acm.c
+++ b/drivers/usb/class/cdc-acm.c
@@ -428,7 +428,7 @@ static void acm_read_bulk_callback(struct urb *urb)
 		return;
 	}
 
-	if (urb->status) {
+	if (status) {
 		set_bit(rb->index, &acm->read_urbs_free);
 		dev_dbg(&acm->data->dev, "%s - non-zero urb status: %d\n",
 							__func__, status);
@@ -462,13 +462,14 @@ static void acm_write_bulk(struct urb *urb)
 	struct acm_wb *wb = urb->context;
 	struct acm *acm = wb->instance;
 	unsigned long flags;
+	int status = urb->status;
 
-	if (urb->status	|| (urb->actual_length != urb->transfer_buffer_length))
+	if (status || (urb->actual_length != urb->transfer_buffer_length))
 		dev_vdbg(&acm->data->dev, "%s - len %d/%d, status %d\n",
 			__func__,
 			urb->actual_length,
 			urb->transfer_buffer_length,
-			urb->status);
+			status);
 
 	spin_lock_irqsave(&acm->write_lock, flags);
 	acm_write_done(acm, wb);
-- 
cgit v1.2.3-59-g8ed1b


From 28965e17ee7a9591c241b831fee050d2391688c6 Mon Sep 17 00:00:00 2001
From: Oliver Neukum <oneukum@suse.de>
Date: Fri, 20 Mar 2015 14:29:18 +0100
Subject: cdc-wdm: unify error handling in write

This makes sure the error handling path is the same for
all error conditions, thus reducing code duplication.

Signed-off-by: Oliver Neukum <oneukum@suse.de>0
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/class/cdc-wdm.c | 31 ++++++++++++++++---------------
 1 file changed, 16 insertions(+), 15 deletions(-)

(limited to 'drivers/usb')

diff --git a/drivers/usb/class/cdc-wdm.c b/drivers/usb/class/cdc-wdm.c
index f053b41fae7f..cdc93d066991 100644
--- a/drivers/usb/class/cdc-wdm.c
+++ b/drivers/usb/class/cdc-wdm.c
@@ -349,30 +349,25 @@ static ssize_t wdm_write
 
 	r = copy_from_user(buf, buffer, count);
 	if (r > 0) {
-		kfree(buf);
 		rv = -EFAULT;
-		goto outnl;
+		goto out_free_mem;
 	}
 
 	/* concurrent writes and disconnect */
 	r = mutex_lock_interruptible(&desc->wlock);
 	rv = -ERESTARTSYS;
-	if (r) {
-		kfree(buf);
-		goto outnl;
-	}
+	if (r)
+		goto out_free_mem;
 
 	if (test_bit(WDM_DISCONNECTING, &desc->flags)) {
-		kfree(buf);
 		rv = -ENODEV;
-		goto outnp;
+		goto out_free_mem_lock;
 	}
 
 	r = usb_autopm_get_interface(desc->intf);
 	if (r < 0) {
-		kfree(buf);
 		rv = usb_translate_errors(r);
-		goto outnp;
+		goto out_free_mem_lock;
 	}
 
 	if (!(file->f_flags & O_NONBLOCK))
@@ -386,9 +381,8 @@ static ssize_t wdm_write
 		r = -EIO;
 
 	if (r < 0) {
-		kfree(buf);
 		rv = r;
-		goto out;
+		goto out_free_mem_pm;
 	}
 
 	req = desc->orq;
@@ -415,21 +409,28 @@ static ssize_t wdm_write
 
 	rv = usb_submit_urb(desc->command, GFP_KERNEL);
 	if (rv < 0) {
-		kfree(buf);
 		desc->outbuf = NULL;
 		clear_bit(WDM_IN_USE, &desc->flags);
 		dev_err(&desc->intf->dev, "Tx URB error: %d\n", rv);
 		rv = usb_translate_errors(rv);
+		goto out_free_mem_pm;
 	} else {
 		dev_dbg(&desc->intf->dev, "Tx URB has been submitted index=%d",
 			req->wIndex);
 	}
-out:
+
 	usb_autopm_put_interface(desc->intf);
-outnp:
 	mutex_unlock(&desc->wlock);
 outnl:
 	return rv < 0 ? rv : count;
+
+out_free_mem_pm:
+	usb_autopm_put_interface(desc->intf);
+out_free_mem_lock:
+	mutex_unlock(&desc->wlock);
+out_free_mem:
+	kfree(buf);
+	return rv;
 }
 
 /*
-- 
cgit v1.2.3-59-g8ed1b


From 323ece54e0761198946ecd0c2091f1d2bfdfcb64 Mon Sep 17 00:00:00 2001
From: Oliver Neukum <oneukum@suse.de>
Date: Fri, 20 Mar 2015 14:29:34 +0100
Subject: cdc-wdm: fix endianness bug in debug statements

Values directly from descriptors given in debug statements
must be converted to native endianness.

Signed-off-by: Oliver Neukum <oneukum@suse.de>
CC: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/class/cdc-wdm.c | 12 +++++++-----
 1 file changed, 7 insertions(+), 5 deletions(-)

(limited to 'drivers/usb')

diff --git a/drivers/usb/class/cdc-wdm.c b/drivers/usb/class/cdc-wdm.c
index cdc93d066991..8e32b8d8115e 100644
--- a/drivers/usb/class/cdc-wdm.c
+++ b/drivers/usb/class/cdc-wdm.c
@@ -245,7 +245,7 @@ static void wdm_int_callback(struct urb *urb)
 	case USB_CDC_NOTIFY_RESPONSE_AVAILABLE:
 		dev_dbg(&desc->intf->dev,
 			"NOTIFY_RESPONSE_AVAILABLE received: index %d len %d",
-			dr->wIndex, dr->wLength);
+			le16_to_cpu(dr->wIndex), le16_to_cpu(dr->wLength));
 		break;
 
 	case USB_CDC_NOTIFY_NETWORK_CONNECTION:
@@ -262,7 +262,9 @@ static void wdm_int_callback(struct urb *urb)
 		clear_bit(WDM_POLL_RUNNING, &desc->flags);
 		dev_err(&desc->intf->dev,
 			"unknown notification %d received: index %d len %d\n",
-			dr->bNotificationType, dr->wIndex, dr->wLength);
+			dr->bNotificationType,
+			le16_to_cpu(dr->wIndex),
+			le16_to_cpu(dr->wLength));
 		goto exit;
 	}
 
@@ -402,7 +404,7 @@ static ssize_t wdm_write
 			     USB_RECIP_INTERFACE);
 	req->bRequest = USB_CDC_SEND_ENCAPSULATED_COMMAND;
 	req->wValue = 0;
-	req->wIndex = desc->inum;
+	req->wIndex = desc->inum; /* already converted */
 	req->wLength = cpu_to_le16(count);
 	set_bit(WDM_IN_USE, &desc->flags);
 	desc->outbuf = buf;
@@ -416,7 +418,7 @@ static ssize_t wdm_write
 		goto out_free_mem_pm;
 	} else {
 		dev_dbg(&desc->intf->dev, "Tx URB has been submitted index=%d",
-			req->wIndex);
+			le16_to_cpu(req->wIndex));
 	}
 
 	usb_autopm_put_interface(desc->intf);
@@ -821,7 +823,7 @@ static int wdm_create(struct usb_interface *intf, struct usb_endpoint_descriptor
 	desc->irq->bRequestType = (USB_DIR_IN | USB_TYPE_CLASS | USB_RECIP_INTERFACE);
 	desc->irq->bRequest = USB_CDC_GET_ENCAPSULATED_RESPONSE;
 	desc->irq->wValue = 0;
-	desc->irq->wIndex = desc->inum;
+	desc->irq->wIndex = desc->inum; /* already converted */
 	desc->irq->wLength = cpu_to_le16(desc->wMaxCommand);
 
 	usb_fill_control_urb(
-- 
cgit v1.2.3-59-g8ed1b


From 85e8a0b9a3565c8185068b6b340cc8c6dd4411f4 Mon Sep 17 00:00:00 2001
From: Oliver Neukum <oneukum@suse.de>
Date: Mon, 23 Mar 2015 14:34:43 +0100
Subject: cdc-wdm: error returns need to be translated

One more case of error codes not correctly being
correctly returned to user space.

Signed-off-by: Olive Neukum <oneukum@suse.com>0
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/class/cdc-wdm.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/usb')

diff --git a/drivers/usb/class/cdc-wdm.c b/drivers/usb/class/cdc-wdm.c
index 8e32b8d8115e..61ea87917433 100644
--- a/drivers/usb/class/cdc-wdm.c
+++ b/drivers/usb/class/cdc-wdm.c
@@ -522,9 +522,9 @@ retry:
 		spin_lock_irq(&desc->iuspin);
 
 		if (desc->rerr) { /* read completed, error happened */
+			rv = usb_translate_errors(desc->rerr);
 			desc->rerr = 0;
 			spin_unlock_irq(&desc->iuspin);
-			rv = -EIO;
 			goto err;
 		}
 		/*
-- 
cgit v1.2.3-59-g8ed1b


From 963719c872a3a71bc2abf4d4899392acab93b09d Mon Sep 17 00:00:00 2001
From: Boris Brezillon <boris.brezillon@free-electrons.com>
Date: Tue, 17 Mar 2015 17:15:47 +0100
Subject: USB: host: ohci-at91: remove useless uclk clock

Now that the system clock driver is forwarding set_rate request to the
parent clock, we can safely call clk_set_rate on the system clk and get
rid of the uclk field.

Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/host/ohci-at91.c | 18 +++---------------
 1 file changed, 3 insertions(+), 15 deletions(-)

(limited to 'drivers/usb')

diff --git a/drivers/usb/host/ohci-at91.c b/drivers/usb/host/ohci-at91.c
index 7cce85a1f7dc..15df00cceed9 100644
--- a/drivers/usb/host/ohci-at91.c
+++ b/drivers/usb/host/ohci-at91.c
@@ -39,7 +39,6 @@
 struct ohci_at91_priv {
 	struct clk *iclk;
 	struct clk *fclk;
-	struct clk *uclk;
 	struct clk *hclk;
 	bool clocked;
 	bool wakeup;		/* Saved wake-up state for resume */
@@ -64,10 +63,8 @@ static void at91_start_clock(struct ohci_at91_priv *ohci_at91)
 {
 	if (ohci_at91->clocked)
 		return;
-	if (IS_ENABLED(CONFIG_COMMON_CLK)) {
-		clk_set_rate(ohci_at91->uclk, 48000000);
-		clk_prepare_enable(ohci_at91->uclk);
-	}
+
+	clk_set_rate(ohci_at91->fclk, 48000000);
 	clk_prepare_enable(ohci_at91->hclk);
 	clk_prepare_enable(ohci_at91->iclk);
 	clk_prepare_enable(ohci_at91->fclk);
@@ -78,11 +75,10 @@ static void at91_stop_clock(struct ohci_at91_priv *ohci_at91)
 {
 	if (!ohci_at91->clocked)
 		return;
+
 	clk_disable_unprepare(ohci_at91->fclk);
 	clk_disable_unprepare(ohci_at91->iclk);
 	clk_disable_unprepare(ohci_at91->hclk);
-	if (IS_ENABLED(CONFIG_COMMON_CLK))
-		clk_disable_unprepare(ohci_at91->uclk);
 	ohci_at91->clocked = false;
 }
 
@@ -191,14 +187,6 @@ static int usb_hcd_at91_probe(const struct hc_driver *driver,
 		retval = PTR_ERR(ohci_at91->hclk);
 		goto err;
 	}
-	if (IS_ENABLED(CONFIG_COMMON_CLK)) {
-		ohci_at91->uclk = devm_clk_get(dev, "usb_clk");
-		if (IS_ERR(ohci_at91->uclk)) {
-			dev_err(dev, "failed to get uclk\n");
-			retval = PTR_ERR(ohci_at91->uclk);
-			goto err;
-		}
-	}
 
 	board = hcd->self.controller->platform_data;
 	ohci = hcd_to_ohci(hcd);
-- 
cgit v1.2.3-59-g8ed1b


From 01ecd156905f6bbfe4f5bd278325071f9141726d Mon Sep 17 00:00:00 2001
From: Li Jun <b47624@freescale.com>
Date: Fri, 20 Mar 2015 16:28:04 +0800
Subject: usb: chipidea: otg: remove unnecessary B_SESS_VLD timer

Since BSV irq is enabled for B-device all the time, so B_SESS_VLD timer
is not required, and also no need to check BSV status when B_ASE0_BRST
timer timeout.

Signed-off-by: Li Jun <jun.li@freescale.com>
Signed-off-by: Peter Chen <peter.chen@freescale.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/chipidea/otg_fsm.c | 31 +------------------------------
 drivers/usb/chipidea/otg_fsm.h |  3 ---
 2 files changed, 1 insertion(+), 33 deletions(-)

(limited to 'drivers/usb')

diff --git a/drivers/usb/chipidea/otg_fsm.c b/drivers/usb/chipidea/otg_fsm.c
index e3cf5be66d3d..3014e2c0ac37 100644
--- a/drivers/usb/chipidea/otg_fsm.c
+++ b/drivers/usb/chipidea/otg_fsm.c
@@ -320,17 +320,6 @@ static void a_wait_vfall_tmout_func(void *ptr, unsigned long indicator)
 	ci_otg_queue_work(ci);
 }
 
-static void b_ase0_brst_tmout_func(void *ptr, unsigned long indicator)
-{
-	struct ci_hdrc *ci = (struct ci_hdrc *)ptr;
-
-	set_tmout(ci, indicator);
-	if (!hw_read_otgsc(ci, OTGSC_BSV))
-		ci->fsm.b_sess_vld = 0;
-
-	ci_otg_queue_work(ci);
-}
-
 static void b_ssend_srp_tmout_func(void *ptr, unsigned long indicator)
 {
 	struct ci_hdrc *ci = (struct ci_hdrc *)ptr;
@@ -342,18 +331,6 @@ static void b_ssend_srp_tmout_func(void *ptr, unsigned long indicator)
 		ci_otg_queue_work(ci);
 }
 
-static void b_sess_vld_tmout_func(void *ptr, unsigned long indicator)
-{
-	struct ci_hdrc *ci = (struct ci_hdrc *)ptr;
-
-	/* Check if A detached */
-	if (!(hw_read_otgsc(ci, OTGSC_BSV))) {
-		ci->fsm.b_sess_vld = 0;
-		ci_otg_add_timer(ci, B_SSEND_SRP);
-		ci_otg_queue_work(ci);
-	}
-}
-
 static void b_data_pulse_end(void *ptr, unsigned long indicator)
 {
 	struct ci_hdrc *ci = (struct ci_hdrc *)ptr;
@@ -405,7 +382,7 @@ static int ci_otg_init_timers(struct ci_hdrc *ci)
 		return -ENOMEM;
 
 	ci->fsm_timer->timer_list[B_ASE0_BRST] =
-		otg_timer_initializer(ci, &b_ase0_brst_tmout_func, TB_ASE0_BRST,
+		otg_timer_initializer(ci, &set_tmout_and_fsm, TB_ASE0_BRST,
 					(unsigned long)&fsm->b_ase0_brst_tmout);
 	if (ci->fsm_timer->timer_list[B_ASE0_BRST] == NULL)
 		return -ENOMEM;
@@ -433,11 +410,6 @@ static int ci_otg_init_timers(struct ci_hdrc *ci)
 	if (ci->fsm_timer->timer_list[B_DATA_PLS] == NULL)
 		return -ENOMEM;
 
-	ci->fsm_timer->timer_list[B_SESS_VLD] =	otg_timer_initializer(ci,
-					&b_sess_vld_tmout_func, TB_SESS_VLD, 0);
-	if (ci->fsm_timer->timer_list[B_SESS_VLD] == NULL)
-		return -ENOMEM;
-
 	return 0;
 }
 
@@ -671,7 +643,6 @@ static void ci_otg_fsm_event(struct ci_hdrc *ci)
 			fsm->a_conn = 0;
 			fsm->b_bus_req = 0;
 			ci_otg_queue_work(ci);
-			ci_otg_add_timer(ci, B_SESS_VLD);
 		}
 		break;
 	case OTG_STATE_A_PERIPHERAL:
diff --git a/drivers/usb/chipidea/otg_fsm.h b/drivers/usb/chipidea/otg_fsm.h
index 94c085f456a9..d0ad4f9ef950 100644
--- a/drivers/usb/chipidea/otg_fsm.h
+++ b/drivers/usb/chipidea/otg_fsm.h
@@ -62,8 +62,6 @@
 /* SSEND time before SRP */
 #define TB_SSEND_SRP         (1500)	/* minimum 1.5 sec, section:5.1.2 */
 
-#define TB_SESS_VLD          (1000)
-
 enum ci_otg_fsm_timer_index {
 	/*
 	 * CI specific timers, start from the end
@@ -71,7 +69,6 @@ enum ci_otg_fsm_timer_index {
 	 */
 	B_DATA_PLS = NUM_OTG_FSM_TIMERS,
 	B_SSEND_SRP,
-	B_SESS_VLD,
 
 	NUM_CI_OTG_FSM_TIMERS,
 };
-- 
cgit v1.2.3-59-g8ed1b


From 2f8a467a11aeec61f5077cd337b4efe74847e1d3 Mon Sep 17 00:00:00 2001
From: Li Jun <b47624@freescale.com>
Date: Fri, 20 Mar 2015 16:28:05 +0800
Subject: usb: otg-fsm: move 2 otg fsm timers definition to otg_fsm_timer

B_DATA_PLS(data-line pulse time) and B_SSEND_SRP(session end to SRP init) are
also from OTG&EH 2.0 Specification and they are not chipidea specific.

Signed-off-by: Li Jun <jun.li@freescale.com>
Signed-off-by: Peter Chen <peter.chen@freescale.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/chipidea/otg_fsm.c |  8 ++++----
 drivers/usb/chipidea/otg_fsm.h | 13 +------------
 include/linux/usb/otg-fsm.h    |  2 ++
 3 files changed, 7 insertions(+), 16 deletions(-)

(limited to 'drivers/usb')

diff --git a/drivers/usb/chipidea/otg_fsm.c b/drivers/usb/chipidea/otg_fsm.c
index 3014e2c0ac37..ba2cb91cb790 100644
--- a/drivers/usb/chipidea/otg_fsm.c
+++ b/drivers/usb/chipidea/otg_fsm.c
@@ -206,13 +206,13 @@ static struct attribute_group inputs_attr_group = {
 /*
  * Add timer to active timer list
  */
-static void ci_otg_add_timer(struct ci_hdrc *ci, enum ci_otg_fsm_timer_index t)
+static void ci_otg_add_timer(struct ci_hdrc *ci, enum otg_fsm_timer t)
 {
 	struct ci_otg_fsm_timer *tmp_timer;
 	struct ci_otg_fsm_timer *timer = ci->fsm_timer->timer_list[t];
 	struct list_head *active_timers = &ci->fsm_timer->active_timers;
 
-	if (t >= NUM_CI_OTG_FSM_TIMERS)
+	if (t >= NUM_OTG_FSM_TIMERS)
 		return;
 
 	/*
@@ -239,14 +239,14 @@ static void ci_otg_add_timer(struct ci_hdrc *ci, enum ci_otg_fsm_timer_index t)
 /*
  * Remove timer from active timer list
  */
-static void ci_otg_del_timer(struct ci_hdrc *ci, enum ci_otg_fsm_timer_index t)
+static void ci_otg_del_timer(struct ci_hdrc *ci, enum otg_fsm_timer t)
 {
 	struct ci_otg_fsm_timer *tmp_timer, *del_tmp;
 	struct ci_otg_fsm_timer *timer = ci->fsm_timer->timer_list[t];
 	struct list_head *active_timers = &ci->fsm_timer->active_timers;
 	int flag = 0;
 
-	if (t >= NUM_CI_OTG_FSM_TIMERS)
+	if (t >= NUM_OTG_FSM_TIMERS)
 		return;
 
 	list_for_each_entry_safe(tmp_timer, del_tmp, active_timers, list)
diff --git a/drivers/usb/chipidea/otg_fsm.h b/drivers/usb/chipidea/otg_fsm.h
index d0ad4f9ef950..9e0fc4c83f13 100644
--- a/drivers/usb/chipidea/otg_fsm.h
+++ b/drivers/usb/chipidea/otg_fsm.h
@@ -62,17 +62,6 @@
 /* SSEND time before SRP */
 #define TB_SSEND_SRP         (1500)	/* minimum 1.5 sec, section:5.1.2 */
 
-enum ci_otg_fsm_timer_index {
-	/*
-	 * CI specific timers, start from the end
-	 * of standard and auxiliary OTG timers
-	 */
-	B_DATA_PLS = NUM_OTG_FSM_TIMERS,
-	B_SSEND_SRP,
-
-	NUM_CI_OTG_FSM_TIMERS,
-};
-
 struct ci_otg_fsm_timer {
 	unsigned long expires;  /* Number of count increase to timeout */
 	unsigned long count;    /* Tick counter */
@@ -82,7 +71,7 @@ struct ci_otg_fsm_timer {
 };
 
 struct ci_otg_fsm_timer_list {
-	struct ci_otg_fsm_timer *timer_list[NUM_CI_OTG_FSM_TIMERS];
+	struct ci_otg_fsm_timer *timer_list[NUM_OTG_FSM_TIMERS];
 	struct list_head active_timers;
 };
 
diff --git a/include/linux/usb/otg-fsm.h b/include/linux/usb/otg-fsm.h
index b6ba1bfb86f2..f728f1854829 100644
--- a/include/linux/usb/otg-fsm.h
+++ b/include/linux/usb/otg-fsm.h
@@ -53,6 +53,8 @@ enum otg_fsm_timer {
 	B_SE0_SRP,
 	B_SRP_FAIL,
 	A_WAIT_ENUM,
+	B_DATA_PLS,
+	B_SSEND_SRP,
 
 	NUM_OTG_FSM_TIMERS,
 };
-- 
cgit v1.2.3-59-g8ed1b


From 3a316ec4c91cfe03093d708369f9ab57000c96c3 Mon Sep 17 00:00:00 2001
From: Li Jun <b47624@freescale.com>
Date: Fri, 20 Mar 2015 16:28:06 +0800
Subject: usb: chipidea: use hrtimer for otg fsm timers

Current otg fsm timers are using controller 1ms irq and count it, this patch
is to replace it with hrtimer solution, use one hrtimer for all otg timers.

Signed-off-by: Li Jun <jun.li@freescale.com>
Signed-off-by: Peter Chen <peter.chen@freescale.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/chipidea/ci.h      |  10 +-
 drivers/usb/chipidea/otg_fsm.c | 364 ++++++++++++++++++++---------------------
 drivers/usb/chipidea/otg_fsm.h |  13 --
 3 files changed, 190 insertions(+), 197 deletions(-)

(limited to 'drivers/usb')

diff --git a/drivers/usb/chipidea/ci.h b/drivers/usb/chipidea/ci.h
index c09381d4ca77..6d6200e37b71 100644
--- a/drivers/usb/chipidea/ci.h
+++ b/drivers/usb/chipidea/ci.h
@@ -162,7 +162,10 @@ struct hw_bank {
  * @role: current role
  * @is_otg: if the device is otg-capable
  * @fsm: otg finite state machine
- * @fsm_timer: pointer to timer list of otg fsm
+ * @otg_fsm_hrtimer: hrtimer for otg fsm timers
+ * @hr_timeouts: time out list for active otg fsm timers
+ * @enabled_otg_timer_bits: bits of enabled otg timers
+ * @next_otg_timer: next nearest enabled timer to be expired
  * @work: work for role changing
  * @wq: workqueue thread
  * @qh_pool: allocation pool for queue heads
@@ -205,7 +208,10 @@ struct ci_hdrc {
 	bool				is_otg;
 	struct usb_otg			otg;
 	struct otg_fsm			fsm;
-	struct ci_otg_fsm_timer_list	*fsm_timer;
+	struct hrtimer			otg_fsm_hrtimer;
+	ktime_t				hr_timeouts[NUM_OTG_FSM_TIMERS];
+	unsigned			enabled_otg_timer_bits;
+	enum otg_fsm_timer		next_otg_timer;
 	struct work_struct		work;
 	struct workqueue_struct		*wq;
 
diff --git a/drivers/usb/chipidea/otg_fsm.c b/drivers/usb/chipidea/otg_fsm.c
index ba2cb91cb790..083acf45ad5a 100644
--- a/drivers/usb/chipidea/otg_fsm.c
+++ b/drivers/usb/chipidea/otg_fsm.c
@@ -30,22 +30,6 @@
 #include "otg.h"
 #include "otg_fsm.h"
 
-static struct ci_otg_fsm_timer *otg_timer_initializer
-(struct ci_hdrc *ci, void (*function)(void *, unsigned long),
-			unsigned long expires, unsigned long data)
-{
-	struct ci_otg_fsm_timer *timer;
-
-	timer = devm_kzalloc(ci->dev, sizeof(struct ci_otg_fsm_timer),
-								GFP_KERNEL);
-	if (!timer)
-		return NULL;
-	timer->function = function;
-	timer->expires = expires;
-	timer->data = data;
-	return timer;
-}
-
 /* Add for otg: interact with user space app */
 static ssize_t
 get_a_bus_req(struct device *dev, struct device_attribute *attr, char *buf)
@@ -203,37 +187,49 @@ static struct attribute_group inputs_attr_group = {
 	.attrs = inputs_attrs,
 };
 
+/*
+ * Keep this list in the same order as timers indexed
+ * by enum otg_fsm_timer in include/linux/usb/otg-fsm.h
+ */
+static unsigned otg_timer_ms[] = {
+	TA_WAIT_VRISE,
+	TA_WAIT_VFALL,
+	TA_WAIT_BCON,
+	TA_AIDL_BDIS,
+	TB_ASE0_BRST,
+	TA_BIDL_ADIS,
+	TB_SE0_SRP,
+	TB_SRP_FAIL,
+	0,
+	TB_DATA_PLS,
+	TB_SSEND_SRP,
+};
+
 /*
  * Add timer to active timer list
  */
 static void ci_otg_add_timer(struct ci_hdrc *ci, enum otg_fsm_timer t)
 {
-	struct ci_otg_fsm_timer *tmp_timer;
-	struct ci_otg_fsm_timer *timer = ci->fsm_timer->timer_list[t];
-	struct list_head *active_timers = &ci->fsm_timer->active_timers;
+	unsigned long flags, timer_sec, timer_nsec;
 
 	if (t >= NUM_OTG_FSM_TIMERS)
 		return;
 
-	/*
-	 * Check if the timer is already in the active list,
-	 * if so update timer count
-	 */
-	list_for_each_entry(tmp_timer, active_timers, list)
-		if (tmp_timer == timer) {
-			timer->count = timer->expires;
-			return;
-		}
-
-	if (list_empty(active_timers))
-		pm_runtime_get(ci->dev);
-
-	timer->count = timer->expires;
-	list_add_tail(&timer->list, active_timers);
-
-	/* Enable 1ms irq */
-	if (!(hw_read_otgsc(ci, OTGSC_1MSIE)))
-		hw_write_otgsc(ci, OTGSC_1MSIE, OTGSC_1MSIE);
+	spin_lock_irqsave(&ci->lock, flags);
+	timer_sec = otg_timer_ms[t] / MSEC_PER_SEC;
+	timer_nsec = (otg_timer_ms[t] % MSEC_PER_SEC) * NSEC_PER_MSEC;
+	ci->hr_timeouts[t] = ktime_add(ktime_get(),
+				ktime_set(timer_sec, timer_nsec));
+	ci->enabled_otg_timer_bits |= (1 << t);
+	if ((ci->next_otg_timer == NUM_OTG_FSM_TIMERS) ||
+			(ci->hr_timeouts[ci->next_otg_timer].tv64 >
+						ci->hr_timeouts[t].tv64)) {
+			ci->next_otg_timer = t;
+			hrtimer_start_range_ns(&ci->otg_fsm_hrtimer,
+					ci->hr_timeouts[t], NSEC_PER_MSEC,
+							HRTIMER_MODE_ABS);
+	}
+	spin_unlock_irqrestore(&ci->lock, flags);
 }
 
 /*
@@ -241,174 +237,178 @@ static void ci_otg_add_timer(struct ci_hdrc *ci, enum otg_fsm_timer t)
  */
 static void ci_otg_del_timer(struct ci_hdrc *ci, enum otg_fsm_timer t)
 {
-	struct ci_otg_fsm_timer *tmp_timer, *del_tmp;
-	struct ci_otg_fsm_timer *timer = ci->fsm_timer->timer_list[t];
-	struct list_head *active_timers = &ci->fsm_timer->active_timers;
-	int flag = 0;
+	unsigned long flags, enabled_timer_bits;
+	enum otg_fsm_timer cur_timer, next_timer = NUM_OTG_FSM_TIMERS;
 
-	if (t >= NUM_OTG_FSM_TIMERS)
+	if ((t >= NUM_OTG_FSM_TIMERS) ||
+			!(ci->enabled_otg_timer_bits & (1 << t)))
 		return;
 
-	list_for_each_entry_safe(tmp_timer, del_tmp, active_timers, list)
-		if (tmp_timer == timer) {
-			list_del(&timer->list);
-			flag = 1;
-		}
-
-	/* Disable 1ms irq if there is no any active timer */
-	if (list_empty(active_timers) && (flag == 1)) {
-		hw_write_otgsc(ci, OTGSC_1MSIE, 0);
-		pm_runtime_put(ci->dev);
-	}
-}
-
-/*
- * Reduce timer count by 1, and find timeout conditions.
- * Called by otg 1ms timer interrupt
- */
-static inline int ci_otg_tick_timer(struct ci_hdrc *ci)
-{
-	struct ci_otg_fsm_timer *tmp_timer, *del_tmp;
-	struct list_head *active_timers = &ci->fsm_timer->active_timers;
-	int expired = 0;
-
-	list_for_each_entry_safe(tmp_timer, del_tmp, active_timers, list) {
-		tmp_timer->count--;
-		/* check if timer expires */
-		if (!tmp_timer->count) {
-			list_del(&tmp_timer->list);
-			tmp_timer->function(ci, tmp_timer->data);
-			expired = 1;
+	spin_lock_irqsave(&ci->lock, flags);
+	ci->enabled_otg_timer_bits &= ~(1 << t);
+	if (ci->next_otg_timer == t) {
+		if (ci->enabled_otg_timer_bits == 0) {
+			/* No enabled timers after delete it */
+			hrtimer_cancel(&ci->otg_fsm_hrtimer);
+			ci->next_otg_timer = NUM_OTG_FSM_TIMERS;
+		} else {
+			/* Find the next timer */
+			enabled_timer_bits = ci->enabled_otg_timer_bits;
+			for_each_set_bit(cur_timer, &enabled_timer_bits,
+							NUM_OTG_FSM_TIMERS) {
+				if ((next_timer == NUM_OTG_FSM_TIMERS) ||
+					(ci->hr_timeouts[next_timer].tv64 <
+					ci->hr_timeouts[cur_timer].tv64))
+					next_timer = cur_timer;
+			}
 		}
 	}
-
-	/* disable 1ms irq if there is no any timer active */
-	if ((expired == 1) && list_empty(active_timers)) {
-		hw_write_otgsc(ci, OTGSC_1MSIE, 0);
-		pm_runtime_put(ci->dev);
+	if (next_timer != NUM_OTG_FSM_TIMERS) {
+		ci->next_otg_timer = next_timer;
+		hrtimer_start_range_ns(&ci->otg_fsm_hrtimer,
+			ci->hr_timeouts[next_timer], NSEC_PER_MSEC,
+							HRTIMER_MODE_ABS);
 	}
-
-	return expired;
+	spin_unlock_irqrestore(&ci->lock, flags);
 }
 
-/* The timeout callback function to set time out bit */
-static void set_tmout(void *ptr, unsigned long indicator)
+/* OTG FSM timer handlers */
+static int a_wait_vrise_tmout(struct ci_hdrc *ci)
 {
-	*(int *)indicator = 1;
+	ci->fsm.a_wait_vrise_tmout = 1;
+	return 0;
 }
 
-static void set_tmout_and_fsm(void *ptr, unsigned long indicator)
+static int a_wait_vfall_tmout(struct ci_hdrc *ci)
 {
-	struct ci_hdrc *ci = (struct ci_hdrc *)ptr;
-
-	set_tmout(ci, indicator);
-
-	ci_otg_queue_work(ci);
+	ci->fsm.a_wait_vfall_tmout = 1;
+	return 0;
 }
 
-static void a_wait_vfall_tmout_func(void *ptr, unsigned long indicator)
+static int a_wait_bcon_tmout(struct ci_hdrc *ci)
 {
-	struct ci_hdrc *ci = (struct ci_hdrc *)ptr;
+	ci->fsm.a_wait_bcon_tmout = 1;
+	return 0;
+}
 
-	set_tmout(ci, indicator);
-	/* Disable port power */
-	hw_write(ci, OP_PORTSC, PORTSC_W1C_BITS | PORTSC_PP, 0);
-	/* Clear existing DP irq */
-	hw_write_otgsc(ci, OTGSC_DPIS, OTGSC_DPIS);
-	/* Enable data pulse irq */
-	hw_write_otgsc(ci, OTGSC_DPIE, OTGSC_DPIE);
-	ci_otg_queue_work(ci);
+static int a_aidl_bdis_tmout(struct ci_hdrc *ci)
+{
+	ci->fsm.a_aidl_bdis_tmout = 1;
+	return 0;
 }
 
-static void b_ssend_srp_tmout_func(void *ptr, unsigned long indicator)
+static int b_ase0_brst_tmout(struct ci_hdrc *ci)
 {
-	struct ci_hdrc *ci = (struct ci_hdrc *)ptr;
+	ci->fsm.b_ase0_brst_tmout = 1;
+	return 0;
+}
 
-	set_tmout(ci, indicator);
+static int a_bidl_adis_tmout(struct ci_hdrc *ci)
+{
+	ci->fsm.a_bidl_adis_tmout = 1;
+	return 0;
+}
 
-	/* only vbus fall below B_sess_vld in b_idle state */
-	if (ci->fsm.otg->state == OTG_STATE_B_IDLE)
-		ci_otg_queue_work(ci);
+static int b_se0_srp_tmout(struct ci_hdrc *ci)
+{
+	ci->fsm.b_se0_srp = 1;
+	return 0;
 }
 
-static void b_data_pulse_end(void *ptr, unsigned long indicator)
+static int b_srp_fail_tmout(struct ci_hdrc *ci)
 {
-	struct ci_hdrc *ci = (struct ci_hdrc *)ptr;
+	ci->fsm.b_srp_done = 1;
+	return 1;
+}
 
+static int b_data_pls_tmout(struct ci_hdrc *ci)
+{
 	ci->fsm.b_srp_done = 1;
 	ci->fsm.b_bus_req = 0;
 	if (ci->fsm.power_up)
 		ci->fsm.power_up = 0;
-
 	hw_write_otgsc(ci, OTGSC_HABA, 0);
+	pm_runtime_put(ci->dev);
+	return 0;
+}
 
-	ci_otg_queue_work(ci);
+static int b_ssend_srp_tmout(struct ci_hdrc *ci)
+{
+	ci->fsm.b_ssend_srp = 1;
+	/* only vbus fall below B_sess_vld in b_idle state */
+	if (ci->fsm.otg->state == OTG_STATE_B_IDLE)
+		return 0;
+	else
+		return 1;
+}
+
+/*
+ * Keep this list in the same order as timers indexed
+ * by enum otg_fsm_timer in include/linux/usb/otg-fsm.h
+ */
+static int (*otg_timer_handlers[])(struct ci_hdrc *) = {
+	a_wait_vrise_tmout,	/* A_WAIT_VRISE */
+	a_wait_vfall_tmout,	/* A_WAIT_VFALL */
+	a_wait_bcon_tmout,	/* A_WAIT_BCON */
+	a_aidl_bdis_tmout,	/* A_AIDL_BDIS */
+	b_ase0_brst_tmout,	/* B_ASE0_BRST */
+	a_bidl_adis_tmout,	/* A_BIDL_ADIS */
+	b_se0_srp_tmout,	/* B_SE0_SRP */
+	b_srp_fail_tmout,	/* B_SRP_FAIL */
+	NULL,			/* A_WAIT_ENUM */
+	b_data_pls_tmout,	/* B_DATA_PLS */
+	b_ssend_srp_tmout,	/* B_SSEND_SRP */
+};
+
+/*
+ * Enable the next nearest enabled timer if have
+ */
+static enum hrtimer_restart ci_otg_hrtimer_func(struct hrtimer *t)
+{
+	struct ci_hdrc *ci = container_of(t, struct ci_hdrc, otg_fsm_hrtimer);
+	ktime_t	now, *timeout;
+	unsigned long   enabled_timer_bits;
+	unsigned long   flags;
+	enum otg_fsm_timer cur_timer, next_timer = NUM_OTG_FSM_TIMERS;
+	int ret = -EINVAL;
+
+	spin_lock_irqsave(&ci->lock, flags);
+	enabled_timer_bits = ci->enabled_otg_timer_bits;
+	ci->next_otg_timer = NUM_OTG_FSM_TIMERS;
+
+	now = ktime_get();
+	for_each_set_bit(cur_timer, &enabled_timer_bits, NUM_OTG_FSM_TIMERS) {
+		if (now.tv64 >= ci->hr_timeouts[cur_timer].tv64) {
+			ci->enabled_otg_timer_bits &= ~(1 << cur_timer);
+			if (otg_timer_handlers[cur_timer])
+				ret = otg_timer_handlers[cur_timer](ci);
+		} else {
+			if ((next_timer == NUM_OTG_FSM_TIMERS) ||
+				(ci->hr_timeouts[cur_timer].tv64 <
+					ci->hr_timeouts[next_timer].tv64))
+				next_timer = cur_timer;
+		}
+	}
+	/* Enable the next nearest timer */
+	if (next_timer < NUM_OTG_FSM_TIMERS) {
+		timeout = &ci->hr_timeouts[next_timer];
+		hrtimer_start_range_ns(&ci->otg_fsm_hrtimer, *timeout,
+					NSEC_PER_MSEC, HRTIMER_MODE_ABS);
+		ci->next_otg_timer = next_timer;
+	}
+	spin_unlock_irqrestore(&ci->lock, flags);
+
+	if (!ret)
+		ci_otg_queue_work(ci);
+
+	return HRTIMER_NORESTART;
 }
 
 /* Initialize timers */
 static int ci_otg_init_timers(struct ci_hdrc *ci)
 {
-	struct otg_fsm *fsm = &ci->fsm;
-
-	/* FSM used timers */
-	ci->fsm_timer->timer_list[A_WAIT_VRISE] =
-		otg_timer_initializer(ci, &set_tmout_and_fsm, TA_WAIT_VRISE,
-			(unsigned long)&fsm->a_wait_vrise_tmout);
-	if (ci->fsm_timer->timer_list[A_WAIT_VRISE] == NULL)
-		return -ENOMEM;
-
-	ci->fsm_timer->timer_list[A_WAIT_VFALL] =
-		otg_timer_initializer(ci, &a_wait_vfall_tmout_func,
-		TA_WAIT_VFALL, (unsigned long)&fsm->a_wait_vfall_tmout);
-	if (ci->fsm_timer->timer_list[A_WAIT_VFALL] == NULL)
-		return -ENOMEM;
-
-	ci->fsm_timer->timer_list[A_WAIT_BCON] =
-		otg_timer_initializer(ci, &set_tmout_and_fsm, TA_WAIT_BCON,
-				(unsigned long)&fsm->a_wait_bcon_tmout);
-	if (ci->fsm_timer->timer_list[A_WAIT_BCON] == NULL)
-		return -ENOMEM;
-
-	ci->fsm_timer->timer_list[A_AIDL_BDIS] =
-		otg_timer_initializer(ci, &set_tmout_and_fsm, TA_AIDL_BDIS,
-				(unsigned long)&fsm->a_aidl_bdis_tmout);
-	if (ci->fsm_timer->timer_list[A_AIDL_BDIS] == NULL)
-		return -ENOMEM;
-
-	ci->fsm_timer->timer_list[A_BIDL_ADIS] =
-		otg_timer_initializer(ci, &set_tmout_and_fsm, TA_BIDL_ADIS,
-				(unsigned long)&fsm->a_bidl_adis_tmout);
-	if (ci->fsm_timer->timer_list[A_BIDL_ADIS] == NULL)
-		return -ENOMEM;
-
-	ci->fsm_timer->timer_list[B_ASE0_BRST] =
-		otg_timer_initializer(ci, &set_tmout_and_fsm, TB_ASE0_BRST,
-					(unsigned long)&fsm->b_ase0_brst_tmout);
-	if (ci->fsm_timer->timer_list[B_ASE0_BRST] == NULL)
-		return -ENOMEM;
-
-	ci->fsm_timer->timer_list[B_SE0_SRP] =
-		otg_timer_initializer(ci, &set_tmout_and_fsm, TB_SE0_SRP,
-					(unsigned long)&fsm->b_se0_srp);
-	if (ci->fsm_timer->timer_list[B_SE0_SRP] == NULL)
-		return -ENOMEM;
-
-	ci->fsm_timer->timer_list[B_SSEND_SRP] =
-		otg_timer_initializer(ci, &b_ssend_srp_tmout_func, TB_SSEND_SRP,
-					(unsigned long)&fsm->b_ssend_srp);
-	if (ci->fsm_timer->timer_list[B_SSEND_SRP] == NULL)
-		return -ENOMEM;
-
-	ci->fsm_timer->timer_list[B_SRP_FAIL] =
-		otg_timer_initializer(ci, &set_tmout, TB_SRP_FAIL,
-				(unsigned long)&fsm->b_srp_done);
-	if (ci->fsm_timer->timer_list[B_SRP_FAIL] == NULL)
-		return -ENOMEM;
-
-	ci->fsm_timer->timer_list[B_DATA_PLS] =
-		otg_timer_initializer(ci, &b_data_pulse_end, TB_DATA_PLS, 0);
-	if (ci->fsm_timer->timer_list[B_DATA_PLS] == NULL)
-		return -ENOMEM;
+	hrtimer_init(&ci->otg_fsm_hrtimer, CLOCK_MONOTONIC, HRTIMER_MODE_ABS);
+	ci->otg_fsm_hrtimer.function = ci_otg_hrtimer_func;
 
 	return 0;
 }
@@ -512,6 +512,7 @@ static void ci_otg_start_pulse(struct otg_fsm *fsm)
 	/* Hardware Assistant Data pulse */
 	hw_write_otgsc(ci, OTGSC_HADP, OTGSC_HADP);
 
+	pm_runtime_get(ci->dev);
 	ci_otg_add_timer(ci, B_DATA_PLS);
 }
 
@@ -579,8 +580,15 @@ int ci_otg_fsm_work(struct ci_hdrc *ci)
 			 * a_idle to a_wait_vrise when power up
 			 */
 			if ((ci->fsm.id) || (ci->id_event) ||
-						(ci->fsm.power_up))
+						(ci->fsm.power_up)) {
 				ci_otg_queue_work(ci);
+			} else {
+				/* Enable data pulse irq */
+				hw_write(ci, OP_PORTSC, PORTSC_W1C_BITS |
+								PORTSC_PP, 0);
+				hw_write_otgsc(ci, OTGSC_DPIS, OTGSC_DPIS);
+				hw_write_otgsc(ci, OTGSC_DPIE, OTGSC_DPIE);
+			}
 			if (ci->id_event)
 				ci->id_event = false;
 		} else if (ci->fsm.otg->state == OTG_STATE_B_IDLE) {
@@ -712,11 +720,7 @@ irqreturn_t ci_otg_fsm_irq(struct ci_hdrc *ci)
 	fsm->id = (otgsc & OTGSC_ID) ? 1 : 0;
 
 	if (otg_int_src) {
-		if (otg_int_src & OTGSC_1MSIS) {
-			hw_write_otgsc(ci, OTGSC_1MSIS, OTGSC_1MSIS);
-			retval = ci_otg_tick_timer(ci);
-			return IRQ_HANDLED;
-		} else if (otg_int_src & OTGSC_DPIS) {
+		if (otg_int_src & OTGSC_DPIS) {
 			hw_write_otgsc(ci, OTGSC_DPIS, OTGSC_DPIS);
 			fsm->a_srp_det = 1;
 			fsm->a_bus_drop = 0;
@@ -780,17 +784,13 @@ int ci_hdrc_otg_fsm_init(struct ci_hdrc *ci)
 
 	mutex_init(&ci->fsm.lock);
 
-	ci->fsm_timer = devm_kzalloc(ci->dev,
-			sizeof(struct ci_otg_fsm_timer_list), GFP_KERNEL);
-	if (!ci->fsm_timer)
-		return -ENOMEM;
-
-	INIT_LIST_HEAD(&ci->fsm_timer->active_timers);
 	retval = ci_otg_init_timers(ci);
 	if (retval) {
 		dev_err(ci->dev, "Couldn't init OTG timers\n");
 		return retval;
 	}
+	ci->enabled_otg_timer_bits = 0;
+	ci->next_otg_timer = NUM_OTG_FSM_TIMERS;
 
 	retval = sysfs_create_group(&ci->dev->kobj, &inputs_attr_group);
 	if (retval < 0) {
diff --git a/drivers/usb/chipidea/otg_fsm.h b/drivers/usb/chipidea/otg_fsm.h
index 9e0fc4c83f13..2689375ae5da 100644
--- a/drivers/usb/chipidea/otg_fsm.h
+++ b/drivers/usb/chipidea/otg_fsm.h
@@ -62,19 +62,6 @@
 /* SSEND time before SRP */
 #define TB_SSEND_SRP         (1500)	/* minimum 1.5 sec, section:5.1.2 */
 
-struct ci_otg_fsm_timer {
-	unsigned long expires;  /* Number of count increase to timeout */
-	unsigned long count;    /* Tick counter */
-	void (*function)(void *, unsigned long);        /* Timeout function */
-	unsigned long data;     /* Data passed to function */
-	struct list_head list;
-};
-
-struct ci_otg_fsm_timer_list {
-	struct ci_otg_fsm_timer *timer_list[NUM_OTG_FSM_TIMERS];
-	struct list_head active_timers;
-};
-
 #ifdef CONFIG_USB_OTG_FSM
 
 int ci_hdrc_otg_fsm_init(struct ci_hdrc *ci);
-- 
cgit v1.2.3-59-g8ed1b


From d728189d10a0bea28ecb0e9acde1ea517112d090 Mon Sep 17 00:00:00 2001
From: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Date: Fri, 20 Mar 2015 16:28:07 +0800
Subject: chipidea: introduce specific Kconfig options for glue drivers

This patch introduces USB_CHIPIDEA_PCI and USB_CHIPIDEA_OF Kconfig options, one
per each specific glue driver. This is needed to provide different dependencies
they have.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Peter Chen <peter.chen@freescale.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/chipidea/Kconfig  | 10 ++++++++++
 drivers/usb/chipidea/Makefile |  9 ++-------
 2 files changed, 12 insertions(+), 7 deletions(-)

(limited to 'drivers/usb')

diff --git a/drivers/usb/chipidea/Kconfig b/drivers/usb/chipidea/Kconfig
index 77b47d82c9a6..8b0edb9c6246 100644
--- a/drivers/usb/chipidea/Kconfig
+++ b/drivers/usb/chipidea/Kconfig
@@ -10,6 +10,16 @@ config USB_CHIPIDEA
 
 if USB_CHIPIDEA
 
+config USB_CHIPIDEA_OF
+	tristate
+	depends on OF
+	default USB_CHIPIDEA
+
+config USB_CHIPIDEA_PCI
+	tristate
+	depends on PCI
+	default USB_CHIPIDEA
+
 config USB_CHIPIDEA_UDC
 	bool "ChipIdea device controller"
 	depends on USB_GADGET
diff --git a/drivers/usb/chipidea/Makefile b/drivers/usb/chipidea/Makefile
index 1fc86a2ca22d..4decb12f2578 100644
--- a/drivers/usb/chipidea/Makefile
+++ b/drivers/usb/chipidea/Makefile
@@ -14,11 +14,6 @@ obj-$(CONFIG_USB_CHIPIDEA)	+= ci_hdrc_usb2.o
 obj-$(CONFIG_USB_CHIPIDEA)	+= ci_hdrc_msm.o
 obj-$(CONFIG_USB_CHIPIDEA)	+= ci_hdrc_zevio.o
 
-# PCI doesn't provide stubs, need to check
-ifneq ($(CONFIG_PCI),)
-	obj-$(CONFIG_USB_CHIPIDEA)	+= ci_hdrc_pci.o
-endif
+obj-$(CONFIG_USB_CHIPIDEA_PCI)	+= ci_hdrc_pci.o
 
-ifneq ($(CONFIG_OF),)
-	obj-$(CONFIG_USB_CHIPIDEA)	+= usbmisc_imx.o ci_hdrc_imx.o
-endif
+obj-$(CONFIG_USB_CHIPIDEA_OF)	+= usbmisc_imx.o ci_hdrc_imx.o
-- 
cgit v1.2.3-59-g8ed1b


From db7869cabd4862d984cca91dee62c14d08ae5b03 Mon Sep 17 00:00:00 2001
From: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Date: Fri, 20 Mar 2015 16:28:08 +0800
Subject: chipidea: pci: make it depends on NOP_USB_XCEIV

After commit ba1aff67f99a (chipidea: pci: register nop PHY) the PCI glue driver
requires nop-PHY to be selected. Thus, make it an explicit dependency.

Reported-by: kbuild test robot <fengguang.wu@intel.com>
Fixes: ba1aff67f99a (chipidea: pci: register nop PHY)
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Peter Chen <peter.chen@freescale.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/chipidea/Kconfig | 1 +
 1 file changed, 1 insertion(+)

(limited to 'drivers/usb')

diff --git a/drivers/usb/chipidea/Kconfig b/drivers/usb/chipidea/Kconfig
index 8b0edb9c6246..5ce3f1d6a6ed 100644
--- a/drivers/usb/chipidea/Kconfig
+++ b/drivers/usb/chipidea/Kconfig
@@ -18,6 +18,7 @@ config USB_CHIPIDEA_OF
 config USB_CHIPIDEA_PCI
 	tristate
 	depends on PCI
+	depends on NOP_USB_XCEIV
 	default USB_CHIPIDEA
 
 config USB_CHIPIDEA_UDC
-- 
cgit v1.2.3-59-g8ed1b


From f4ea80a6026a09aa0b59ec7443b901660f390550 Mon Sep 17 00:00:00 2001
From: kbuild test robot <fengguang.wu@intel.com>
Date: Wed, 25 Mar 2015 07:54:12 +0800
Subject: usb: host/sl811-hcd: fix platform_no_drv_owner.cocci warnings

drivers/usb/host/sl811-hcd.c:1812:3-8: No need to set .owner here. The core will do it.

 Remove .owner field if calls are used which set it automatically

Generated by: scripts/coccinelle/api/platform_no_drv_owner.cocci

Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
Acked-by: Lad, Prabhakar <prabhakar.csengg@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/host/sl811-hcd.c | 1 -
 1 file changed, 1 deletion(-)

(limited to 'drivers/usb')

diff --git a/drivers/usb/host/sl811-hcd.c b/drivers/usb/host/sl811-hcd.c
index aceddfdd166d..944a4173dd94 100644
--- a/drivers/usb/host/sl811-hcd.c
+++ b/drivers/usb/host/sl811-hcd.c
@@ -1809,7 +1809,6 @@ static struct platform_driver sl811h_driver = {
 	.resume =	sl811h_resume,
 	.driver = {
 		.name =	(char *) hcd_name,
-		.owner = THIS_MODULE,
 	},
 };
 EXPORT_SYMBOL(sl811h_driver);
-- 
cgit v1.2.3-59-g8ed1b


From b830d07dc3f6891cd4788f651fa240d32fdbc068 Mon Sep 17 00:00:00 2001
From: Peter Hung <hpeter@gmail.com>
Date: Tue, 17 Mar 2015 17:48:19 +0800
Subject: USB: f81232: rename private struct member name

Change private struct member name from line_status to modem_status.
It will store MSR for some functions used

Signed-off-by: Peter Hung <hpeter+linux_kernel@gmail.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
---
 drivers/usb/serial/f81232.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

(limited to 'drivers/usb')

diff --git a/drivers/usb/serial/f81232.c b/drivers/usb/serial/f81232.c
index c5dc233db2d9..669a2f2e7fdb 100644
--- a/drivers/usb/serial/f81232.c
+++ b/drivers/usb/serial/f81232.c
@@ -47,7 +47,7 @@ MODULE_DEVICE_TABLE(usb, id_table);
 struct f81232_private {
 	spinlock_t lock;
 	u8 line_control;
-	u8 line_status;
+	u8 modem_status;
 };
 
 static void f81232_update_line_status(struct usb_serial_port *port,
@@ -113,8 +113,8 @@ static void f81232_process_read_urb(struct urb *urb)
 
 	/* update line status */
 	spin_lock_irqsave(&priv->lock, flags);
-	line_status = priv->line_status;
-	priv->line_status &= ~UART_STATE_TRANSIENT_MASK;
+	line_status = priv->modem_status;
+	priv->modem_status &= ~UART_STATE_TRANSIENT_MASK;
 	spin_unlock_irqrestore(&priv->lock, flags);
 
 	if (!urb->actual_length)
@@ -241,7 +241,7 @@ static void f81232_dtr_rts(struct usb_serial_port *port, int on)
 static int f81232_carrier_raised(struct usb_serial_port *port)
 {
 	struct f81232_private *priv = usb_get_serial_port_data(port);
-	if (priv->line_status & UART_DCD)
+	if (priv->modem_status & UART_DCD)
 		return 1;
 	return 0;
 }
-- 
cgit v1.2.3-59-g8ed1b


From 8885078949fbb78c6be39ed2c653e4e883568e2f Mon Sep 17 00:00:00 2001
From: Peter Hung <hpeter@gmail.com>
Date: Tue, 17 Mar 2015 17:48:20 +0800
Subject: USB: f81232: implement RX bulk-in EP

The F81232 bulk-in is RX data + LSR channel, data format is
[LSR+Data][LSR+Data]..... , We had implemented in f81232_process_read_urb().

Signed-off-by: Peter Hung <hpeter+linux_kernel@gmail.com>
[johan: reword comment in process_read_urb ]
Signed-off-by: Johan Hovold <johan@kernel.org>
---
 drivers/usb/serial/f81232.c | 75 +++++++++++++++++++++++++--------------------
 1 file changed, 41 insertions(+), 34 deletions(-)

(limited to 'drivers/usb')

diff --git a/drivers/usb/serial/f81232.c b/drivers/usb/serial/f81232.c
index 669a2f2e7fdb..4664cf4cc7a8 100644
--- a/drivers/usb/serial/f81232.c
+++ b/drivers/usb/serial/f81232.c
@@ -23,6 +23,7 @@
 #include <linux/uaccess.h>
 #include <linux/usb.h>
 #include <linux/usb/serial.h>
+#include <linux/serial_reg.h>
 
 static const struct usb_device_id id_table[] = {
 	{ USB_DEVICE(0x1934, 0x0706) },
@@ -104,44 +105,50 @@ exit:
 static void f81232_process_read_urb(struct urb *urb)
 {
 	struct usb_serial_port *port = urb->context;
-	struct f81232_private *priv = usb_get_serial_port_data(port);
 	unsigned char *data = urb->transfer_buffer;
-	char tty_flag = TTY_NORMAL;
-	unsigned long flags;
-	u8 line_status;
-	int i;
+	char tty_flag;
+	unsigned int i;
+	u8 lsr;
 
-	/* update line status */
-	spin_lock_irqsave(&priv->lock, flags);
-	line_status = priv->modem_status;
-	priv->modem_status &= ~UART_STATE_TRANSIENT_MASK;
-	spin_unlock_irqrestore(&priv->lock, flags);
-
-	if (!urb->actual_length)
+	/*
+	 * When opening the port we get a 1-byte packet with the current LSR,
+	 * which we discard.
+	 */
+	if ((urb->actual_length < 2) || (urb->actual_length % 2))
 		return;
 
-	/* break takes precedence over parity, */
-	/* which takes precedence over framing errors */
-	if (line_status & UART_BREAK_ERROR)
-		tty_flag = TTY_BREAK;
-	else if (line_status & UART_PARITY_ERROR)
-		tty_flag = TTY_PARITY;
-	else if (line_status & UART_FRAME_ERROR)
-		tty_flag = TTY_FRAME;
-	dev_dbg(&port->dev, "%s - tty_flag = %d\n", __func__, tty_flag);
-
-	/* overrun is special, not associated with a char */
-	if (line_status & UART_OVERRUN_ERROR)
-		tty_insert_flip_char(&port->port, 0, TTY_OVERRUN);
-
-	if (port->port.console && port->sysrq) {
-		for (i = 0; i < urb->actual_length; ++i)
-			if (!usb_serial_handle_sysrq_char(port, data[i]))
-				tty_insert_flip_char(&port->port, data[i],
-						tty_flag);
-	} else {
-		tty_insert_flip_string_fixed_flag(&port->port, data, tty_flag,
-							urb->actual_length);
+	/* bulk-in data: [LSR(1Byte)+DATA(1Byte)][LSR(1Byte)+DATA(1Byte)]... */
+
+	for (i = 0; i < urb->actual_length; i += 2) {
+		tty_flag = TTY_NORMAL;
+		lsr = data[i];
+
+		if (lsr & UART_LSR_BRK_ERROR_BITS) {
+			if (lsr & UART_LSR_BI) {
+				tty_flag = TTY_BREAK;
+				port->icount.brk++;
+				usb_serial_handle_break(port);
+			} else if (lsr & UART_LSR_PE) {
+				tty_flag = TTY_PARITY;
+				port->icount.parity++;
+			} else if (lsr & UART_LSR_FE) {
+				tty_flag = TTY_FRAME;
+				port->icount.frame++;
+			}
+
+			if (lsr & UART_LSR_OE) {
+				port->icount.overrun++;
+				tty_insert_flip_char(&port->port, 0,
+						TTY_OVERRUN);
+			}
+		}
+
+		if (port->port.console && port->sysrq) {
+			if (usb_serial_handle_sysrq_char(port, data[i + 1]))
+				continue;
+		}
+
+		tty_insert_flip_char(&port->port, data[i + 1], tty_flag);
 	}
 
 	tty_flip_buffer_push(&port->port);
-- 
cgit v1.2.3-59-g8ed1b


From 7139c932859f5b35b5a928b445e03f5a43610fa7 Mon Sep 17 00:00:00 2001
From: Peter Hung <hpeter@gmail.com>
Date: Tue, 17 Mar 2015 17:48:21 +0800
Subject: USB: f81232: change lock mechanism

The original driver lock with spin_lock_irqsave()/spin_unlock_irqrestore()
because of it's maybe used in interrupt context f81232_process_read_urb().

We had remove it from previous patch "implement RX bulk-in EP", so we can
change it from busying loop spin_lock to sleepable mutex_lock.

Signed-off-by: Peter Hung <hpeter+linux_kernel@gmail.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
---
 drivers/usb/serial/f81232.c | 11 +++++------
 1 file changed, 5 insertions(+), 6 deletions(-)

(limited to 'drivers/usb')

diff --git a/drivers/usb/serial/f81232.c b/drivers/usb/serial/f81232.c
index 4664cf4cc7a8..12840cdc8532 100644
--- a/drivers/usb/serial/f81232.c
+++ b/drivers/usb/serial/f81232.c
@@ -19,7 +19,7 @@
 #include <linux/serial.h>
 #include <linux/module.h>
 #include <linux/moduleparam.h>
-#include <linux/spinlock.h>
+#include <linux/mutex.h>
 #include <linux/uaccess.h>
 #include <linux/usb.h>
 #include <linux/usb/serial.h>
@@ -46,7 +46,7 @@ MODULE_DEVICE_TABLE(usb, id_table);
 #define UART_CTS			0x80
 
 struct f81232_private {
-	spinlock_t lock;
+	struct mutex lock;
 	u8 line_control;
 	u8 modem_status;
 };
@@ -231,17 +231,16 @@ static void f81232_close(struct usb_serial_port *port)
 static void f81232_dtr_rts(struct usb_serial_port *port, int on)
 {
 	struct f81232_private *priv = usb_get_serial_port_data(port);
-	unsigned long flags;
 	u8 control;
 
-	spin_lock_irqsave(&priv->lock, flags);
+	mutex_lock(&priv->lock);
 	/* Change DTR and RTS */
 	if (on)
 		priv->line_control |= (CONTROL_DTR | CONTROL_RTS);
 	else
 		priv->line_control &= ~(CONTROL_DTR | CONTROL_RTS);
 	control = priv->line_control;
-	spin_unlock_irqrestore(&priv->lock, flags);
+	mutex_unlock(&priv->lock);
 	set_control_lines(port->serial->dev, control);
 }
 
@@ -285,7 +284,7 @@ static int f81232_port_probe(struct usb_serial_port *port)
 	if (!priv)
 		return -ENOMEM;
 
-	spin_lock_init(&priv->lock);
+	mutex_init(&priv->lock);
 
 	usb_set_serial_port_data(port, priv);
 
-- 
cgit v1.2.3-59-g8ed1b


From 87fe5adcd8de001160d9208def72cc11f3780845 Mon Sep 17 00:00:00 2001
From: Peter Hung <hpeter@gmail.com>
Date: Tue, 17 Mar 2015 17:48:22 +0800
Subject: USB: f81232: implement read IIR/MSR with endpoint

The interrupt endpoint will report current IIR. If we got IIR with MSR changed
, We will do read MSR with interrupt_work worker to do f81232_read_msr()
function.

Signed-off-by: Peter Hung <hpeter+linux_kernel@gmail.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
---
 drivers/usb/serial/f81232.c | 126 +++++++++++++++++++++++++++++++++++++++++---
 1 file changed, 118 insertions(+), 8 deletions(-)

(limited to 'drivers/usb')

diff --git a/drivers/usb/serial/f81232.c b/drivers/usb/serial/f81232.c
index 12840cdc8532..e53ceea7ec35 100644
--- a/drivers/usb/serial/f81232.c
+++ b/drivers/usb/serial/f81232.c
@@ -31,6 +31,13 @@ static const struct usb_device_id id_table[] = {
 };
 MODULE_DEVICE_TABLE(usb, id_table);
 
+/* USB Control EP parameter */
+#define F81232_REGISTER_REQUEST	0xa0
+#define F81232_GET_REGISTER		0xc0
+
+#define SERIAL_BASE_ADDRESS			0x0120
+#define MODEM_STATUS_REGISTER		(0x06 + SERIAL_BASE_ADDRESS)
+
 #define CONTROL_DTR			0x01
 #define CONTROL_RTS			0x02
 
@@ -49,19 +56,112 @@ struct f81232_private {
 	struct mutex lock;
 	u8 line_control;
 	u8 modem_status;
+	struct work_struct interrupt_work;
+	struct usb_serial_port *port;
 };
 
+static int f81232_get_register(struct usb_serial_port *port, u16 reg, u8 *val)
+{
+	int status;
+	u8 *tmp;
+	struct usb_device *dev = port->serial->dev;
+
+	tmp = kmalloc(sizeof(*val), GFP_KERNEL);
+	if (!tmp)
+		return -ENOMEM;
+
+	status = usb_control_msg(dev,
+				usb_rcvctrlpipe(dev, 0),
+				F81232_REGISTER_REQUEST,
+				F81232_GET_REGISTER,
+				reg,
+				0,
+				tmp,
+				sizeof(*val),
+				USB_CTRL_GET_TIMEOUT);
+	if (status != sizeof(*val)) {
+		dev_err(&port->dev, "%s failed status: %d\n", __func__, status);
+
+		if (status < 0)
+			status = usb_translate_errors(status);
+		else
+			status = -EIO;
+	} else {
+		status = 0;
+		*val = *tmp;
+	}
+
+	kfree(tmp);
+	return status;
+}
+
+static void f81232_read_msr(struct usb_serial_port *port)
+{
+	int status;
+	u8 current_msr;
+	struct tty_struct *tty;
+	struct f81232_private *priv = usb_get_serial_port_data(port);
+
+	mutex_lock(&priv->lock);
+	status = f81232_get_register(port, MODEM_STATUS_REGISTER,
+			&current_msr);
+	if (status) {
+		dev_err(&port->dev, "%s fail, status: %d\n", __func__, status);
+		mutex_unlock(&priv->lock);
+		return;
+	}
+
+	if (!(current_msr & UART_MSR_ANY_DELTA)) {
+		mutex_unlock(&priv->lock);
+		return;
+	}
+
+	priv->modem_status = current_msr;
+
+	if (current_msr & UART_MSR_DCTS)
+		port->icount.cts++;
+	if (current_msr & UART_MSR_DDSR)
+		port->icount.dsr++;
+	if (current_msr & UART_MSR_TERI)
+		port->icount.rng++;
+	if (current_msr & UART_MSR_DDCD) {
+		port->icount.dcd++;
+		tty = tty_port_tty_get(&port->port);
+		if (tty) {
+			usb_serial_handle_dcd_change(port, tty,
+					current_msr & UART_MSR_DCD);
+
+			tty_kref_put(tty);
+		}
+	}
+
+	wake_up_interruptible(&port->port.delta_msr_wait);
+	mutex_unlock(&priv->lock);
+}
+
 static void f81232_update_line_status(struct usb_serial_port *port,
 				      unsigned char *data,
-				      unsigned int actual_length)
+				      size_t actual_length)
 {
-	/*
-	 * FIXME: Update port->icount, and call
-	 *
-	 *		wake_up_interruptible(&port->port.delta_msr_wait);
-	 *
-	 *	  on MSR changes.
-	 */
+	struct f81232_private *priv = usb_get_serial_port_data(port);
+
+	if (!actual_length)
+		return;
+
+	switch (data[0] & 0x07) {
+	case 0x00: /* msr change */
+		dev_dbg(&port->dev, "IIR: MSR Change: %02x\n", data[0]);
+		schedule_work(&priv->interrupt_work);
+		break;
+	case 0x02: /* tx-empty */
+		break;
+	case 0x04: /* rx data available */
+		break;
+	case 0x06: /* lsr change */
+		/* we can forget it. the LSR will read from bulk-in */
+		dev_dbg(&port->dev, "IIR: LSR Change: %02x\n", data[0]);
+		break;
+	}
 }
 
 static void f81232_read_int_callback(struct urb *urb)
@@ -276,6 +376,14 @@ static int f81232_ioctl(struct tty_struct *tty,
 	return -ENOIOCTLCMD;
 }
 
+static void  f81232_interrupt_work(struct work_struct *work)
+{
+	struct f81232_private *priv =
+		container_of(work, struct f81232_private, interrupt_work);
+
+	f81232_read_msr(priv->port);
+}
+
 static int f81232_port_probe(struct usb_serial_port *port)
 {
 	struct f81232_private *priv;
@@ -285,10 +393,12 @@ static int f81232_port_probe(struct usb_serial_port *port)
 		return -ENOMEM;
 
 	mutex_init(&priv->lock);
+	INIT_WORK(&priv->interrupt_work,  f81232_interrupt_work);
 
 	usb_set_serial_port_data(port, priv);
 
 	port->port.drain_delay = 256;
+	priv->port = port;
 
 	return 0;
 }
-- 
cgit v1.2.3-59-g8ed1b


From 691545fd92551baea6207781b33c95aa6444bf0d Mon Sep 17 00:00:00 2001
From: Peter Hung <hpeter@gmail.com>
Date: Tue, 17 Mar 2015 17:48:23 +0800
Subject: USB: f81232: implement MCR/MSR function

This patch implement relative MCR/MSR function, such like
tiocmget()/tiocmset()/dtr_rts()/carrier_raised()

original f81232_carrier_raised() compared with wrong value UART_DCD.
It's should compared with UART_MSR_DCD.

Signed-off-by: Peter Hung <hpeter+linux_kernel@gmail.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
---
 drivers/usb/serial/f81232.c | 139 +++++++++++++++++++++++++++++++++++++-------
 1 file changed, 117 insertions(+), 22 deletions(-)

(limited to 'drivers/usb')

diff --git a/drivers/usb/serial/f81232.c b/drivers/usb/serial/f81232.c
index e53ceea7ec35..307e1472fda6 100644
--- a/drivers/usb/serial/f81232.c
+++ b/drivers/usb/serial/f81232.c
@@ -34,8 +34,10 @@ MODULE_DEVICE_TABLE(usb, id_table);
 /* USB Control EP parameter */
 #define F81232_REGISTER_REQUEST	0xa0
 #define F81232_GET_REGISTER		0xc0
+#define F81232_SET_REGISTER		0x40
 
 #define SERIAL_BASE_ADDRESS			0x0120
+#define MODEM_CONTROL_REGISTER		(0x04 + SERIAL_BASE_ADDRESS)
 #define MODEM_STATUS_REGISTER		(0x06 + SERIAL_BASE_ADDRESS)
 
 #define CONTROL_DTR			0x01
@@ -54,7 +56,7 @@ MODULE_DEVICE_TABLE(usb, id_table);
 
 struct f81232_private {
 	struct mutex lock;
-	u8 line_control;
+	u8 modem_control;
 	u8 modem_status;
 	struct work_struct interrupt_work;
 	struct usb_serial_port *port;
@@ -95,6 +97,42 @@ static int f81232_get_register(struct usb_serial_port *port, u16 reg, u8 *val)
 	return status;
 }
 
+static int f81232_set_register(struct usb_serial_port *port, u16 reg, u8 val)
+{
+	int status;
+	u8 *tmp;
+	struct usb_device *dev = port->serial->dev;
+
+	tmp = kmalloc(sizeof(val), GFP_KERNEL);
+	if (!tmp)
+		return -ENOMEM;
+
+	*tmp = val;
+
+	status = usb_control_msg(dev,
+				usb_sndctrlpipe(dev, 0),
+				F81232_REGISTER_REQUEST,
+				F81232_SET_REGISTER,
+				reg,
+				0,
+				tmp,
+				sizeof(val),
+				USB_CTRL_SET_TIMEOUT);
+	if (status != sizeof(val)) {
+		dev_err(&port->dev, "%s failed status: %d\n", __func__, status);
+
+		if (status < 0)
+			status = usb_translate_errors(status);
+		else
+			status = -EIO;
+	} else {
+		status = 0;
+	}
+
+	kfree(tmp);
+	return status;
+}
+
 static void f81232_read_msr(struct usb_serial_port *port)
 {
 	int status;
@@ -139,6 +177,51 @@ static void f81232_read_msr(struct usb_serial_port *port)
 	mutex_unlock(&priv->lock);
 }
 
+static int f81232_set_mctrl(struct usb_serial_port *port,
+					   unsigned int set, unsigned int clear)
+{
+	u8 val;
+	int status;
+	struct f81232_private *priv = usb_get_serial_port_data(port);
+
+	if (((set | clear) & (TIOCM_DTR | TIOCM_RTS)) == 0)
+		return 0;	/* no change */
+
+	/* 'set' takes precedence over 'clear' */
+	clear &= ~set;
+
+	/* force enable interrupt with OUT2 */
+	mutex_lock(&priv->lock);
+	val = UART_MCR_OUT2 | priv->modem_control;
+
+	if (clear & TIOCM_DTR)
+		val &= ~UART_MCR_DTR;
+
+	if (clear & TIOCM_RTS)
+		val &= ~UART_MCR_RTS;
+
+	if (set & TIOCM_DTR)
+		val |= UART_MCR_DTR;
+
+	if (set & TIOCM_RTS)
+		val |= UART_MCR_RTS;
+
+	dev_dbg(&port->dev, "%s new:%02x old:%02x\n", __func__,
+			val, priv->modem_control);
+
+	status = f81232_set_register(port, MODEM_CONTROL_REGISTER, val);
+	if (status) {
+		dev_err(&port->dev, "%s set MCR status < 0\n", __func__);
+		mutex_unlock(&priv->lock);
+		return status;
+	}
+
+	priv->modem_control = val;
+	mutex_unlock(&priv->lock);
+
+	return 0;
+}
+
 static void f81232_update_line_status(struct usb_serial_port *port,
 				      unsigned char *data,
 				      size_t actual_length)
@@ -254,12 +337,6 @@ static void f81232_process_read_urb(struct urb *urb)
 	tty_flip_buffer_push(&port->port);
 }
 
-static int set_control_lines(struct usb_device *dev, u8 value)
-{
-	/* FIXME - Stubbed out for now */
-	return 0;
-}
-
 static void f81232_break_ctl(struct tty_struct *tty, int break_state)
 {
 	/* FIXME - Stubbed out for now */
@@ -287,15 +364,35 @@ static void f81232_set_termios(struct tty_struct *tty,
 
 static int f81232_tiocmget(struct tty_struct *tty)
 {
-	/* FIXME - Stubbed out for now */
-	return 0;
+	int r;
+	struct usb_serial_port *port = tty->driver_data;
+	struct f81232_private *port_priv = usb_get_serial_port_data(port);
+	u8 mcr, msr;
+
+	/* force get current MSR changed state */
+	f81232_read_msr(port);
+
+	mutex_lock(&port_priv->lock);
+	mcr = port_priv->modem_control;
+	msr = port_priv->modem_status;
+	mutex_unlock(&port_priv->lock);
+
+	r = (mcr & UART_MCR_DTR ? TIOCM_DTR : 0) |
+		(mcr & UART_MCR_RTS ? TIOCM_RTS : 0) |
+		(msr & UART_MSR_CTS ? TIOCM_CTS : 0) |
+		(msr & UART_MSR_DCD ? TIOCM_CAR : 0) |
+		(msr & UART_MSR_RI ? TIOCM_RI : 0) |
+		(msr & UART_MSR_DSR ? TIOCM_DSR : 0);
+
+	return r;
 }
 
 static int f81232_tiocmset(struct tty_struct *tty,
 			unsigned int set, unsigned int clear)
 {
-	/* FIXME - Stubbed out for now */
-	return 0;
+	struct usb_serial_port *port = tty->driver_data;
+
+	return f81232_set_mctrl(port, set, clear);
 }
 
 static int f81232_open(struct tty_struct *tty, struct usb_serial_port *port)
@@ -330,24 +427,22 @@ static void f81232_close(struct usb_serial_port *port)
 
 static void f81232_dtr_rts(struct usb_serial_port *port, int on)
 {
-	struct f81232_private *priv = usb_get_serial_port_data(port);
-	u8 control;
-
-	mutex_lock(&priv->lock);
-	/* Change DTR and RTS */
 	if (on)
-		priv->line_control |= (CONTROL_DTR | CONTROL_RTS);
+		f81232_set_mctrl(port, TIOCM_DTR | TIOCM_RTS, 0);
 	else
-		priv->line_control &= ~(CONTROL_DTR | CONTROL_RTS);
-	control = priv->line_control;
-	mutex_unlock(&priv->lock);
-	set_control_lines(port->serial->dev, control);
+		f81232_set_mctrl(port, 0, TIOCM_DTR | TIOCM_RTS);
 }
 
 static int f81232_carrier_raised(struct usb_serial_port *port)
 {
+	u8 msr;
 	struct f81232_private *priv = usb_get_serial_port_data(port);
-	if (priv->modem_status & UART_DCD)
+
+	mutex_lock(&priv->lock);
+	msr = priv->modem_status;
+	mutex_unlock(&priv->lock);
+
+	if (msr & UART_MSR_DCD)
 		return 1;
 	return 0;
 }
-- 
cgit v1.2.3-59-g8ed1b


From 94f87309fb12e3d41dbc56df899f3b357277d0bf Mon Sep 17 00:00:00 2001
From: Peter Hung <hpeter@gmail.com>
Date: Tue, 17 Mar 2015 17:48:24 +0800
Subject: USB: f81232: implement port enable/disable method

We put FCR/IER initial step to f81232_port_enable()/f81232_port_disable().
When port is open, it set MSR interrupt on. Otherwise set it off.

Signed-off-by: Peter Hung <hpeter+linux_kernel@gmail.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
---
 drivers/usb/serial/f81232.c | 49 +++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 49 insertions(+)

(limited to 'drivers/usb')

diff --git a/drivers/usb/serial/f81232.c b/drivers/usb/serial/f81232.c
index 307e1472fda6..960282304b50 100644
--- a/drivers/usb/serial/f81232.c
+++ b/drivers/usb/serial/f81232.c
@@ -37,6 +37,8 @@ MODULE_DEVICE_TABLE(usb, id_table);
 #define F81232_SET_REGISTER		0x40
 
 #define SERIAL_BASE_ADDRESS			0x0120
+#define INTERRUPT_ENABLE_REGISTER	(0x01 + SERIAL_BASE_ADDRESS)
+#define FIFO_CONTROL_REGISTER		(0x02 + SERIAL_BASE_ADDRESS)
 #define MODEM_CONTROL_REGISTER		(0x04 + SERIAL_BASE_ADDRESS)
 #define MODEM_STATUS_REGISTER		(0x06 + SERIAL_BASE_ADDRESS)
 
@@ -348,6 +350,48 @@ static void f81232_break_ctl(struct tty_struct *tty, int break_state)
 	 */
 }
 
+static int f81232_port_enable(struct usb_serial_port *port)
+{
+	u8 val;
+	int status;
+
+	/* fifo on, trigger8, clear TX/RX*/
+	val = UART_FCR_TRIGGER_8 | UART_FCR_ENABLE_FIFO | UART_FCR_CLEAR_RCVR |
+			UART_FCR_CLEAR_XMIT;
+
+	status = f81232_set_register(port, FIFO_CONTROL_REGISTER, val);
+	if (status) {
+		dev_err(&port->dev, "%s failed to set FCR: %d\n",
+			__func__, status);
+		return status;
+	}
+
+	/* MSR Interrupt only, LSR will read from Bulk-in odd byte */
+	status = f81232_set_register(port, INTERRUPT_ENABLE_REGISTER,
+			UART_IER_MSI);
+	if (status) {
+		dev_err(&port->dev, "%s failed to set IER: %d\n",
+			__func__, status);
+		return status;
+	}
+
+	return 0;
+}
+
+static int f81232_port_disable(struct usb_serial_port *port)
+{
+	int status;
+
+	status = f81232_set_register(port, INTERRUPT_ENABLE_REGISTER, 0);
+	if (status) {
+		dev_err(&port->dev, "%s failed to set IER: %d\n",
+			__func__, status);
+		return status;
+	}
+
+	return 0;
+}
+
 static void f81232_set_termios(struct tty_struct *tty,
 		struct usb_serial_port *port, struct ktermios *old_termios)
 {
@@ -399,6 +443,10 @@ static int f81232_open(struct tty_struct *tty, struct usb_serial_port *port)
 {
 	int result;
 
+	result = f81232_port_enable(port);
+	if (result)
+		return result;
+
 	/* Setup termios */
 	if (tty)
 		f81232_set_termios(tty, port, NULL);
@@ -421,6 +469,7 @@ static int f81232_open(struct tty_struct *tty, struct usb_serial_port *port)
 
 static void f81232_close(struct usb_serial_port *port)
 {
+	f81232_port_disable(port);
 	usb_serial_generic_close(port);
 	usb_kill_urb(port->interrupt_in_urb);
 }
-- 
cgit v1.2.3-59-g8ed1b


From 8bb4ca6b56bdf65944d0848561ea8dcf53a87507 Mon Sep 17 00:00:00 2001
From: Peter Hung <hpeter@gmail.com>
Date: Tue, 17 Mar 2015 17:48:25 +0800
Subject: USB: f81232: implement set_termios()

The original driver had do not any h/w change in driver.
This patch implements with configure H/W for
baud/parity/word length/stop bits functional in f81232_set_termios().

This patch also implement DTR/RTS control when baudrate B0.
We drop DTR/RTS when B0, otherwise enable it.

We are checking baudrate in set_termios() too, If baudrate larger then 115200,
it will be changed to 115200 and use tty_encode_baud_rate() to encode into tty

Signed-off-by: Peter Hung <hpeter+linux_kernel@gmail.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
---
 drivers/usb/serial/f81232.c | 112 ++++++++++++++++++++++++++++++++++++++++++--
 1 file changed, 108 insertions(+), 4 deletions(-)

(limited to 'drivers/usb')

diff --git a/drivers/usb/serial/f81232.c b/drivers/usb/serial/f81232.c
index 960282304b50..c00ced1ed281 100644
--- a/drivers/usb/serial/f81232.c
+++ b/drivers/usb/serial/f81232.c
@@ -31,14 +31,19 @@ static const struct usb_device_id id_table[] = {
 };
 MODULE_DEVICE_TABLE(usb, id_table);
 
+/* Maximum baudrate for F81232 */
+#define F81232_MAX_BAUDRATE	115200
+
 /* USB Control EP parameter */
 #define F81232_REGISTER_REQUEST	0xa0
 #define F81232_GET_REGISTER		0xc0
 #define F81232_SET_REGISTER		0x40
 
 #define SERIAL_BASE_ADDRESS			0x0120
+#define RECEIVE_BUFFER_REGISTER		(0x00 + SERIAL_BASE_ADDRESS)
 #define INTERRUPT_ENABLE_REGISTER	(0x01 + SERIAL_BASE_ADDRESS)
 #define FIFO_CONTROL_REGISTER		(0x02 + SERIAL_BASE_ADDRESS)
+#define LINE_CONTROL_REGISTER		(0x03 + SERIAL_BASE_ADDRESS)
 #define MODEM_CONTROL_REGISTER		(0x04 + SERIAL_BASE_ADDRESS)
 #define MODEM_STATUS_REGISTER		(0x06 + SERIAL_BASE_ADDRESS)
 
@@ -64,6 +69,11 @@ struct f81232_private {
 	struct usb_serial_port *port;
 };
 
+static int calc_baud_divisor(speed_t baudrate)
+{
+	return DIV_ROUND_CLOSEST(F81232_MAX_BAUDRATE, baudrate);
+}
+
 static int f81232_get_register(struct usb_serial_port *port, u16 reg, u8 *val)
 {
 	int status;
@@ -350,6 +360,53 @@ static void f81232_break_ctl(struct tty_struct *tty, int break_state)
 	 */
 }
 
+static void f81232_set_baudrate(struct usb_serial_port *port, speed_t baudrate)
+{
+	u8 lcr;
+	int divisor, status = 0;
+
+	divisor = calc_baud_divisor(baudrate);
+
+	status = f81232_get_register(port, LINE_CONTROL_REGISTER,
+			 &lcr); /* get LCR */
+	if (status) {
+		dev_err(&port->dev, "%s failed to get LCR: %d\n",
+			__func__, status);
+		return;
+	}
+
+	status = f81232_set_register(port, LINE_CONTROL_REGISTER,
+			 lcr | UART_LCR_DLAB); /* Enable DLAB */
+	if (status) {
+		dev_err(&port->dev, "%s failed to set DLAB: %d\n",
+			__func__, status);
+		return;
+	}
+
+	status = f81232_set_register(port, RECEIVE_BUFFER_REGISTER,
+			 divisor & 0x00ff); /* low */
+	if (status) {
+		dev_err(&port->dev, "%s failed to set baudrate MSB: %d\n",
+			__func__, status);
+		goto reapply_lcr;
+	}
+
+	status = f81232_set_register(port, INTERRUPT_ENABLE_REGISTER,
+			 (divisor & 0xff00) >> 8); /* high */
+	if (status) {
+		dev_err(&port->dev, "%s failed to set baudrate LSB: %d\n",
+			__func__, status);
+	}
+
+reapply_lcr:
+	status = f81232_set_register(port, LINE_CONTROL_REGISTER,
+			lcr & ~UART_LCR_DLAB);
+	if (status) {
+		dev_err(&port->dev, "%s failed to set DLAB: %d\n",
+			__func__, status);
+	}
+}
+
 static int f81232_port_enable(struct usb_serial_port *port)
 {
 	u8 val;
@@ -395,15 +452,62 @@ static int f81232_port_disable(struct usb_serial_port *port)
 static void f81232_set_termios(struct tty_struct *tty,
 		struct usb_serial_port *port, struct ktermios *old_termios)
 {
-	/* FIXME - Stubbed out for now */
+	u8 new_lcr = 0;
+	int status = 0;
+	speed_t baudrate;
 
 	/* Don't change anything if nothing has changed */
 	if (old_termios && !tty_termios_hw_change(&tty->termios, old_termios))
 		return;
 
-	/* Do the real work here... */
-	if (old_termios)
-		tty_termios_copy_hw(&tty->termios, old_termios);
+	if (C_BAUD(tty) == B0)
+		f81232_set_mctrl(port, 0, TIOCM_DTR | TIOCM_RTS);
+	else if (old_termios && (old_termios->c_cflag & CBAUD) == B0)
+		f81232_set_mctrl(port, TIOCM_DTR | TIOCM_RTS, 0);
+
+	baudrate = tty_get_baud_rate(tty);
+	if (baudrate > 0) {
+		if (baudrate > F81232_MAX_BAUDRATE) {
+			baudrate = F81232_MAX_BAUDRATE;
+			tty_encode_baud_rate(tty, baudrate, baudrate);
+		}
+		f81232_set_baudrate(port, baudrate);
+	}
+
+	if (C_PARENB(tty)) {
+		new_lcr |= UART_LCR_PARITY;
+
+		if (!C_PARODD(tty))
+			new_lcr |= UART_LCR_EPAR;
+
+		if (C_CMSPAR(tty))
+			new_lcr |= UART_LCR_SPAR;
+	}
+
+	if (C_CSTOPB(tty))
+		new_lcr |= UART_LCR_STOP;
+
+	switch (C_CSIZE(tty)) {
+	case CS5:
+		new_lcr |= UART_LCR_WLEN5;
+		break;
+	case CS6:
+		new_lcr |= UART_LCR_WLEN6;
+		break;
+	case CS7:
+		new_lcr |= UART_LCR_WLEN7;
+		break;
+	default:
+	case CS8:
+		new_lcr |= UART_LCR_WLEN8;
+		break;
+	}
+
+	status = f81232_set_register(port, LINE_CONTROL_REGISTER, new_lcr);
+	if (status) {
+		dev_err(&port->dev, "%s failed to set LCR: %d\n",
+			__func__, status);
+	}
 }
 
 static int f81232_tiocmget(struct tty_struct *tty)
-- 
cgit v1.2.3-59-g8ed1b


From 88d35cffff83cc0b11d6e7a2bef73b602f156da0 Mon Sep 17 00:00:00 2001
From: Peter Hung <hpeter@gmail.com>
Date: Tue, 17 Mar 2015 17:48:26 +0800
Subject: USB: f81232: clarify f81232_ioctl() and fix

We extract TIOCGSERIAL section in f81232_ioctl() to f81232_get_serial_info()
to make it clarify.

Also we fix device type from 16654 to 16550A, and set it's baud_base
to 115200 (1.8432MHz/16).

Signed-off-by: Peter Hung <hpeter+linux_kernel@gmail.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
---
 drivers/usb/serial/f81232.c | 30 +++++++++++++++++++-----------
 1 file changed, 19 insertions(+), 11 deletions(-)

(limited to 'drivers/usb')

diff --git a/drivers/usb/serial/f81232.c b/drivers/usb/serial/f81232.c
index c00ced1ed281..fd4b7cc29c8a 100644
--- a/drivers/usb/serial/f81232.c
+++ b/drivers/usb/serial/f81232.c
@@ -600,24 +600,32 @@ static int f81232_carrier_raised(struct usb_serial_port *port)
 	return 0;
 }
 
+static int f81232_get_serial_info(struct usb_serial_port *port,
+		unsigned long arg)
+{
+	struct serial_struct ser;
+
+	memset(&ser, 0, sizeof(ser));
+
+	ser.type = PORT_16550A;
+	ser.line = port->minor;
+	ser.port = port->port_number;
+	ser.baud_base = F81232_MAX_BAUDRATE;
+
+	if (copy_to_user((void __user *)arg, &ser, sizeof(ser)))
+		return -EFAULT;
+
+	return 0;
+}
+
 static int f81232_ioctl(struct tty_struct *tty,
 			unsigned int cmd, unsigned long arg)
 {
-	struct serial_struct ser;
 	struct usb_serial_port *port = tty->driver_data;
 
 	switch (cmd) {
 	case TIOCGSERIAL:
-		memset(&ser, 0, sizeof ser);
-		ser.type = PORT_16654;
-		ser.line = port->minor;
-		ser.port = port->port_number;
-		ser.baud_base = 460800;
-
-		if (copy_to_user((void __user *)arg, &ser, sizeof ser))
-			return -EFAULT;
-
-		return 0;
+		return f81232_get_serial_info(port, arg);
 	default:
 		break;
 	}
-- 
cgit v1.2.3-59-g8ed1b


From 9e7d953bbf746cf704238965a716e0afcfe0f5f4 Mon Sep 17 00:00:00 2001
From: Peter Hung <hpeter@gmail.com>
Date: Tue, 17 Mar 2015 17:48:27 +0800
Subject: USB: f81232: cleanup non-used define

We remove non-used define in this patch to avoid wrong usage.

Signed-off-by: Peter Hung <hpeter+linux_kernel@gmail.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
---
 drivers/usb/serial/f81232.c | 14 --------------
 1 file changed, 14 deletions(-)

(limited to 'drivers/usb')

diff --git a/drivers/usb/serial/f81232.c b/drivers/usb/serial/f81232.c
index fd4b7cc29c8a..ecb579806159 100644
--- a/drivers/usb/serial/f81232.c
+++ b/drivers/usb/serial/f81232.c
@@ -47,20 +47,6 @@ MODULE_DEVICE_TABLE(usb, id_table);
 #define MODEM_CONTROL_REGISTER		(0x04 + SERIAL_BASE_ADDRESS)
 #define MODEM_STATUS_REGISTER		(0x06 + SERIAL_BASE_ADDRESS)
 
-#define CONTROL_DTR			0x01
-#define CONTROL_RTS			0x02
-
-#define UART_STATE			0x08
-#define UART_STATE_TRANSIENT_MASK	0x74
-#define UART_DCD			0x01
-#define UART_DSR			0x02
-#define UART_BREAK_ERROR		0x04
-#define UART_RING			0x08
-#define UART_FRAME_ERROR		0x10
-#define UART_PARITY_ERROR		0x20
-#define UART_OVERRUN_ERROR		0x40
-#define UART_CTS			0x80
-
 struct f81232_private {
 	struct mutex lock;
 	u8 modem_control;
-- 
cgit v1.2.3-59-g8ed1b


From 96ee85c06515407453e2ac09d6fbdece0c791087 Mon Sep 17 00:00:00 2001
From: Peter Hung <hpeter@gmail.com>
Date: Tue, 17 Mar 2015 17:48:28 +0800
Subject: USB: f81232: modify/add author

Add me to co-author and fix no '>' in greg kh's email

Signed-off-by: Peter Hung <hpeter+linux_kernel@gmail.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
---
 drivers/usb/serial/f81232.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

(limited to 'drivers/usb')

diff --git a/drivers/usb/serial/f81232.c b/drivers/usb/serial/f81232.c
index ecb579806159..68016e7a86f7 100644
--- a/drivers/usb/serial/f81232.c
+++ b/drivers/usb/serial/f81232.c
@@ -688,5 +688,6 @@ static struct usb_serial_driver * const serial_drivers[] = {
 module_usb_serial_driver(serial_drivers, id_table);
 
 MODULE_DESCRIPTION("Fintek F81232 USB to serial adaptor driver");
-MODULE_AUTHOR("Greg Kroah-Hartman <gregkh@linuxfoundation.org");
+MODULE_AUTHOR("Greg Kroah-Hartman <gregkh@linuxfoundation.org>");
+MODULE_AUTHOR("Peter Hong <peter_hong@fintek.com.tw>");
 MODULE_LICENSE("GPL v2");
-- 
cgit v1.2.3-59-g8ed1b


From 65dd82ae453f5290be0ea83ed0f23163ea49c0eb Mon Sep 17 00:00:00 2001
From: Johan Hovold <johan@kernel.org>
Date: Fri, 27 Mar 2015 17:33:38 +0100
Subject: USB: f81232: fix some minor style issues

Fix some really minor coding-style issues.

Signed-off-by: Johan Hovold <johan@kernel.org>
---
 drivers/usb/serial/f81232.c | 11 ++++++-----
 1 file changed, 6 insertions(+), 5 deletions(-)

(limited to 'drivers/usb')

diff --git a/drivers/usb/serial/f81232.c b/drivers/usb/serial/f81232.c
index 68016e7a86f7..972f5a5fe577 100644
--- a/drivers/usb/serial/f81232.c
+++ b/drivers/usb/serial/f81232.c
@@ -32,14 +32,14 @@ static const struct usb_device_id id_table[] = {
 MODULE_DEVICE_TABLE(usb, id_table);
 
 /* Maximum baudrate for F81232 */
-#define F81232_MAX_BAUDRATE	115200
+#define F81232_MAX_BAUDRATE		115200
 
 /* USB Control EP parameter */
-#define F81232_REGISTER_REQUEST	0xa0
+#define F81232_REGISTER_REQUEST		0xa0
 #define F81232_GET_REGISTER		0xc0
 #define F81232_SET_REGISTER		0x40
 
-#define SERIAL_BASE_ADDRESS			0x0120
+#define SERIAL_BASE_ADDRESS		0x0120
 #define RECEIVE_BUFFER_REGISTER		(0x00 + SERIAL_BASE_ADDRESS)
 #define INTERRUPT_ENABLE_REGISTER	(0x01 + SERIAL_BASE_ADDRESS)
 #define FIFO_CONTROL_REGISTER		(0x02 + SERIAL_BASE_ADDRESS)
@@ -349,7 +349,8 @@ static void f81232_break_ctl(struct tty_struct *tty, int break_state)
 static void f81232_set_baudrate(struct usb_serial_port *port, speed_t baudrate)
 {
 	u8 lcr;
-	int divisor, status = 0;
+	int divisor;
+	int status = 0;
 
 	divisor = calc_baud_divisor(baudrate);
 
@@ -666,7 +667,7 @@ static struct usb_serial_driver f81232_device = {
 	.bulk_out_size =	256,
 	.open =			f81232_open,
 	.close =		f81232_close,
-	.dtr_rts = 		f81232_dtr_rts,
+	.dtr_rts =		f81232_dtr_rts,
 	.carrier_raised =	f81232_carrier_raised,
 	.ioctl =		f81232_ioctl,
 	.break_ctl =		f81232_break_ctl,
-- 
cgit v1.2.3-59-g8ed1b


From 8b86ed078a65433a60ff59091a136d23724bd6d3 Mon Sep 17 00:00:00 2001
From: Keith Packard <keithp@keithp.com>
Date: Thu, 26 Mar 2015 16:49:38 -0700
Subject: usb: Fix warnings in chaoskey driver

>    drivers/usb/misc/chaoskey.c: In function 'chaoskey_read':
> >> drivers/usb/misc/chaoskey.c:412:3: error: implicit declaration of function 'copy_to_user'
> >> [-Werror=implicit-function-declaration]
>       remain = copy_to_user(buffer, dev->buf + dev->used, this_time);

I was unable to reproduce this locally, but added an explicit

	#include <linux/uaccess.h>

which should ensure the definition on all architectures.

> sparse warnings: (new ones prefixed by >>)
>
> >> drivers/usb/misc/chaoskey.c:117:30: sparse: incorrect type in assignment (different base types)
>    drivers/usb/misc/chaoskey.c:117:30:    expected int [signed] size
>    drivers/usb/misc/chaoskey.c:117:30:    got restricted __le16 [usertype] wMaxPacketSize

Switched the code to using the USB descriptor accessor functions.

Signed-off-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/misc/chaoskey.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

(limited to 'drivers/usb')

diff --git a/drivers/usb/misc/chaoskey.c b/drivers/usb/misc/chaoskey.c
index ef80ce9452a4..3ad5d19e4d04 100644
--- a/drivers/usb/misc/chaoskey.c
+++ b/drivers/usb/misc/chaoskey.c
@@ -27,6 +27,8 @@
 #include <linux/usb.h>
 #include <linux/wait.h>
 #include <linux/hw_random.h>
+#include <linux/mutex.h>
+#include <linux/uaccess.h>
 
 static struct usb_driver chaoskey_driver;
 static struct usb_class_driver chaoskey_class;
@@ -113,8 +115,8 @@ static int chaoskey_probe(struct usb_interface *interface,
 	/* Find the first bulk IN endpoint and its packet size */
 	for (i = 0; i < altsetting->desc.bNumEndpoints; i++) {
 		if (usb_endpoint_is_bulk_in(&altsetting->endpoint[i].desc)) {
-			in_ep = altsetting->endpoint[i].desc.bEndpointAddress;
-			size = altsetting->endpoint[i].desc.wMaxPacketSize;
+			in_ep = usb_endpoint_num(&altsetting->endpoint[i].desc);
+			size = usb_endpoint_maxp(&altsetting->endpoint[i].desc);
 			break;
 		}
 	}
-- 
cgit v1.2.3-59-g8ed1b


From e845d64743ee397ff132e7f81e6bfb3597f9f479 Mon Sep 17 00:00:00 2001
From: Guenter Roeck <linux@roeck-us.net>
Date: Sun, 29 Mar 2015 02:21:20 -0700
Subject: Revert "usb: host/sl811-hcd: fix sparse warning"

This reverts commit 1dc6120ef7f003305d99ef12f598a6b05eacc38c.

Commit 1dc6120ef7f0 results in the following error when compiling
x86_64:allyesconfig.

sl811_cs.c:(.text+0x1d3cb72): undefined reference to `sl811h_driver'

Fixes: 1dc6120ef7f0 ("usb: host/sl811-hcd: fix sparse warning")
Cc: Lad, Prabhakar <prabhakar.csengg@gmail.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/host/sl811-hcd.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/usb')

diff --git a/drivers/usb/host/sl811-hcd.c b/drivers/usb/host/sl811-hcd.c
index 944a4173dd94..f1d5c5a11705 100644
--- a/drivers/usb/host/sl811-hcd.c
+++ b/drivers/usb/host/sl811-hcd.c
@@ -1801,7 +1801,7 @@ sl811h_resume(struct platform_device *dev)
 
 
 /* this driver is exported so sl811_cs can depend on it */
-static struct platform_driver sl811h_driver = {
+struct platform_driver sl811h_driver = {
 	.probe =	sl811h_probe,
 	.remove =	sl811h_remove,
 
-- 
cgit v1.2.3-59-g8ed1b


From c6ab3aec4bc4beda2d6eb8ea43c6f5be3b215d3f Mon Sep 17 00:00:00 2001
From: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Date: Thu, 2 Apr 2015 20:22:34 +0900
Subject: usb: phy: rcar-gen2-usb: Fix USBHS_UGSTS_LOCK value

According to the technical update (No. TN-RCS-B011A/E), the UGSTS LOCK
bit location is bit 8, not bits 9 and 8. So, this patch fixes the
USBHS_UGSTS_LOCK value.

Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/phy/phy-rcar-gen2-usb.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/usb')

diff --git a/drivers/usb/phy/phy-rcar-gen2-usb.c b/drivers/usb/phy/phy-rcar-gen2-usb.c
index f83808413ba2..f81800b6562a 100644
--- a/drivers/usb/phy/phy-rcar-gen2-usb.c
+++ b/drivers/usb/phy/phy-rcar-gen2-usb.c
@@ -47,7 +47,7 @@ struct rcar_gen2_usb_phy_priv {
 
 /* USB General status register */
 #define USBHS_UGSTS_REG			0x88
-#define USBHS_UGSTS_LOCK		(3 << 8)
+#define USBHS_UGSTS_LOCK		(1 << 8)
 
 /* Enable USBHS internal phy */
 static int __rcar_gen2_usbhs_phy_enable(void __iomem *base)
-- 
cgit v1.2.3-59-g8ed1b


From d9aab404e60d122ded979fa0b81db42fb680d867 Mon Sep 17 00:00:00 2001
From: Randy Dunlap <rdunlap@infradead.org>
Date: Thu, 2 Apr 2015 17:10:55 -0700
Subject: usb/misc: fix chaoskey build, needs HW_RANDOM

Fix build errors when HW_RANDOM is not enabled:

drivers/built-in.o: In function `chaoskey_disconnect':
chaoskey.c:(.text+0x5f3f00): undefined reference to `hwrng_unregister'
drivers/built-in.o: In function `chaoskey_probe':
chaoskey.c:(.text+0x5f42a6): undefined reference to `hwrng_register'

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/misc/Kconfig | 1 +
 1 file changed, 1 insertion(+)

(limited to 'drivers/usb')

diff --git a/drivers/usb/misc/Kconfig b/drivers/usb/misc/Kconfig
index 8c331f1dfd23..f7a7fc21be8a 100644
--- a/drivers/usb/misc/Kconfig
+++ b/drivers/usb/misc/Kconfig
@@ -258,6 +258,7 @@ config USB_LINK_LAYER_TEST
 
 config USB_CHAOSKEY
 	tristate "ChaosKey random number generator driver support"
+	depends on HW_RANDOM
 	help
 	  Say Y here if you want to connect an AltusMetrum ChaosKey to
 	  your computer's USB port. The ChaosKey is a hardware random
-- 
cgit v1.2.3-59-g8ed1b


From 22299d13c28b13fe6140037980e79bc6fdb5f329 Mon Sep 17 00:00:00 2001
From: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Date: Sun, 29 Mar 2015 01:46:39 +0300
Subject: wusbcore: rh: use USB_DT_HUB

Fix  using the  bare number to set the 'bDescriptorType' field of the Hub
Descriptor while the value  is #define'd in <linux/usb/ch11.h>.

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/wusbcore/rh.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/usb')

diff --git a/drivers/usb/wusbcore/rh.c b/drivers/usb/wusbcore/rh.c
index aa5af817f31c..a082fe62b1f0 100644
--- a/drivers/usb/wusbcore/rh.c
+++ b/drivers/usb/wusbcore/rh.c
@@ -182,7 +182,7 @@ static int wusbhc_rh_get_hub_descr(struct wusbhc *wusbhc, u16 wValue,
 	if (wLength < length)
 		return -ENOSPC;
 	descr->bDescLength = 7 + 2 * temp;
-	descr->bDescriptorType = 0x29;	/* HUB type */
+	descr->bDescriptorType = USB_DT_HUB; /* HUB type */
 	descr->bNbrPorts = wusbhc->ports_max;
 	descr->wHubCharacteristics = cpu_to_le16(
 		HUB_CHAR_COMMON_LPSM	/* All ports power at once */
-- 
cgit v1.2.3-59-g8ed1b


From 8f413d807b37efcc7c7fa45f824f08d614a8cc0a Mon Sep 17 00:00:00 2001
From: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Date: Sun, 29 Mar 2015 01:45:02 +0300
Subject: usbip: vhci_hcd: use USB_DT_HUB

Fix  using the  bare number to set the 'bDescriptorType' field of the Hub
Descriptor while the value  is #define'd in <linux/usb/ch11.h>.

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Acked-by: Valentina Manea <valentina.manea.m@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/usbip/vhci_hcd.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/usb')

diff --git a/drivers/usb/usbip/vhci_hcd.c b/drivers/usb/usbip/vhci_hcd.c
index 11f6f61c2381..e9ef1eccdace 100644
--- a/drivers/usb/usbip/vhci_hcd.c
+++ b/drivers/usb/usbip/vhci_hcd.c
@@ -216,7 +216,7 @@ done:
 static inline void hub_descriptor(struct usb_hub_descriptor *desc)
 {
 	memset(desc, 0, sizeof(*desc));
-	desc->bDescriptorType = 0x29;
+	desc->bDescriptorType = USB_DT_HUB;
 	desc->bDescLength = 9;
 	desc->wHubCharacteristics = __constant_cpu_to_le16(
 		HUB_CHAR_INDV_PORT_LPSM | HUB_CHAR_COMMON_OCPM);
-- 
cgit v1.2.3-59-g8ed1b


From b11373debee613760e81f520899e8807368188ad Mon Sep 17 00:00:00 2001
From: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Date: Sun, 29 Mar 2015 01:43:25 +0300
Subject: renesas_usbhs: mod_host: use USB_DT_HUB

Fix  using the  bare number to set the 'bDescriptorType' field of the Hub
Descriptor while the value  is #define'd in <linux/usb/ch11.h>.

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/renesas_usbhs/mod_host.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/usb')

diff --git a/drivers/usb/renesas_usbhs/mod_host.c b/drivers/usb/renesas_usbhs/mod_host.c
index 96eead619282..bd050359926c 100644
--- a/drivers/usb/renesas_usbhs/mod_host.c
+++ b/drivers/usb/renesas_usbhs/mod_host.c
@@ -1229,7 +1229,7 @@ static int __usbhsh_hub_get_status(struct usbhsh_hpriv *hpriv,
 		break;
 
 	case GetHubDescriptor:
-		desc->bDescriptorType		= 0x29;
+		desc->bDescriptorType		= USB_DT_HUB;
 		desc->bHubContrCurrent		= 0;
 		desc->bNbrPorts			= roothub_id;
 		desc->bDescLength		= 9;
-- 
cgit v1.2.3-59-g8ed1b


From e95af3aa1dc791d04795dbd12597cbe71405765d Mon Sep 17 00:00:00 2001
From: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Date: Sun, 29 Mar 2015 01:42:06 +0300
Subject: musb_virthub: use USB_DT_HUB

Fix  using the  bare number to set the 'bDescriptorType' field of the Hub
Descriptor while the value  is #define'd in <linux/usb/ch11.h>.

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/musb/musb_virthub.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/usb')

diff --git a/drivers/usb/musb/musb_virthub.c b/drivers/usb/musb/musb_virthub.c
index 294e159f4afe..52ee9a74f6ee 100644
--- a/drivers/usb/musb/musb_virthub.c
+++ b/drivers/usb/musb/musb_virthub.c
@@ -345,7 +345,7 @@ int musb_hub_control(
 		struct usb_hub_descriptor *desc = (void *)buf;
 
 		desc->bDescLength = 9;
-		desc->bDescriptorType = 0x29;
+		desc->bDescriptorType = USB_DT_HUB;
 		desc->bNbrPorts = 1;
 		desc->wHubCharacteristics = cpu_to_le16(
 			HUB_CHAR_INDV_PORT_LPSM /* per-port power switching */
-- 
cgit v1.2.3-59-g8ed1b


From 1cf6563b3e9ecdfd8378fb81484632f715607a04 Mon Sep 17 00:00:00 2001
From: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Date: Sun, 29 Mar 2015 01:40:24 +0300
Subject: isp1760-hcd: use USB_DT_HUB

Fix  using the  bare number to set the 'bDescriptorType' field of the Hub
Descriptor while the value  is #define'd in <linux/usb/ch11.h>.

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/isp1760/isp1760-hcd.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/usb')

diff --git a/drivers/usb/isp1760/isp1760-hcd.c b/drivers/usb/isp1760/isp1760-hcd.c
index 3cb98b1d5d29..9e23153c3c2e 100644
--- a/drivers/usb/isp1760/isp1760-hcd.c
+++ b/drivers/usb/isp1760/isp1760-hcd.c
@@ -1758,7 +1758,7 @@ static void isp1760_hub_descriptor(struct isp1760_hcd *priv,
 	int ports = HCS_N_PORTS(priv->hcs_params);
 	u16 temp;
 
-	desc->bDescriptorType = 0x29;
+	desc->bDescriptorType = USB_DT_HUB;
 	/* priv 1.0, 2.3.9 says 20ms max */
 	desc->bPwrOn2PwrGood = 10;
 	desc->bHubContrCurrent = 0;
-- 
cgit v1.2.3-59-g8ed1b


From 2569ffd58b03d900f53b073054df4dc45ca67873 Mon Sep 17 00:00:00 2001
From: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Date: Sun, 29 Mar 2015 01:39:09 +0300
Subject: dummy_hcd: use USB_DT[_SS]_HUB

Fix  using  the  bare numbers to set the 'bDescriptorType' field of the Hub
Descriptors while the values are #define'd in <linux/usb/ch11.h>.

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/gadget/udc/dummy_hcd.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'drivers/usb')

diff --git a/drivers/usb/gadget/udc/dummy_hcd.c b/drivers/usb/gadget/udc/dummy_hcd.c
index 7592db7824c6..181112c88f43 100644
--- a/drivers/usb/gadget/udc/dummy_hcd.c
+++ b/drivers/usb/gadget/udc/dummy_hcd.c
@@ -1923,7 +1923,7 @@ static inline void
 ss_hub_descriptor(struct usb_hub_descriptor *desc)
 {
 	memset(desc, 0, sizeof *desc);
-	desc->bDescriptorType = 0x2a;
+	desc->bDescriptorType = USB_DT_SS_HUB;
 	desc->bDescLength = 12;
 	desc->wHubCharacteristics = cpu_to_le16(
 			HUB_CHAR_INDV_PORT_LPSM |
@@ -1936,7 +1936,7 @@ ss_hub_descriptor(struct usb_hub_descriptor *desc)
 static inline void hub_descriptor(struct usb_hub_descriptor *desc)
 {
 	memset(desc, 0, sizeof *desc);
-	desc->bDescriptorType = 0x29;
+	desc->bDescriptorType = USB_DT_HUB;
 	desc->bDescLength = 9;
 	desc->wHubCharacteristics = cpu_to_le16(
 			HUB_CHAR_INDV_PORT_LPSM |
-- 
cgit v1.2.3-59-g8ed1b


From a5dd03950aa8be19b61a802cea8e9edde462d4ea Mon Sep 17 00:00:00 2001
From: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Date: Sun, 29 Mar 2015 01:36:28 +0300
Subject: dwc2: hcd: use USB_DT_HUB

Fix  using the  bare number to set the 'bDescriptorType' field of the Hub
Descriptor while the value  is #define'd in <linux/usb/ch11.h>.

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/dwc2/hcd.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/usb')

diff --git a/drivers/usb/dwc2/hcd.c b/drivers/usb/dwc2/hcd.c
index 559b55e5debb..6f4acfa9252e 100644
--- a/drivers/usb/dwc2/hcd.c
+++ b/drivers/usb/dwc2/hcd.c
@@ -1616,7 +1616,7 @@ static int dwc2_hcd_hub_control(struct dwc2_hsotg *hsotg, u16 typereq,
 		dev_dbg(hsotg->dev, "GetHubDescriptor\n");
 		hub_desc = (struct usb_hub_descriptor *)buf;
 		hub_desc->bDescLength = 9;
-		hub_desc->bDescriptorType = 0x29;
+		hub_desc->bDescriptorType = USB_DT_HUB;
 		hub_desc->bNbrPorts = 1;
 		hub_desc->wHubCharacteristics =
 			cpu_to_le16(HUB_CHAR_COMMON_LPSM |
-- 
cgit v1.2.3-59-g8ed1b


From e27465f51aa40f9826553547f3de25330bfcdeec Mon Sep 17 00:00:00 2001
From: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Date: Sun, 29 Mar 2015 01:34:12 +0300
Subject: c67x00-hcd: use USB_DT_HUB

Fix  using the  bare number to set the 'bDescriptorType' field of the Hub
Descriptor while the value  is #define'd in <linux/usb/ch11.h>.

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/c67x00/c67x00-hcd.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/usb')

diff --git a/drivers/usb/c67x00/c67x00-hcd.c b/drivers/usb/c67x00/c67x00-hcd.c
index 20ec4eee1ac8..c2d13968da82 100644
--- a/drivers/usb/c67x00/c67x00-hcd.c
+++ b/drivers/usb/c67x00/c67x00-hcd.c
@@ -34,7 +34,7 @@
 
 static __u8 c67x00_hub_des[] = {
 	0x09,			/*  __u8  bLength; */
-	0x29,			/*  __u8  bDescriptorType; Hub-descriptor */
+	USB_DT_HUB,		/*  __u8  bDescriptorType; Hub-descriptor */
 	0x02,			/*  __u8  bNbrPorts; */
 	0x00,			/* __u16  wHubCharacteristics; */
 	0x00,			/*   (per-port OC, no power switching) */
-- 
cgit v1.2.3-59-g8ed1b


From 3e5dd4c349465066b85a487af6fabd4fc32c7987 Mon Sep 17 00:00:00 2001
From: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Date: Sun, 29 Mar 2015 01:30:04 +0300
Subject: uhci-hub: use USB_DT_HUB

Fix  using the  bare numbers to set the 'bHubCharacteristics' field of the Hub
Descriptor while the values are #define'd in <linux/usb/ch11.h>.

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/host/uhci-hub.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/usb')

diff --git a/drivers/usb/host/uhci-hub.c b/drivers/usb/host/uhci-hub.c
index 19ba5eafb31e..a7cc0221e003 100644
--- a/drivers/usb/host/uhci-hub.c
+++ b/drivers/usb/host/uhci-hub.c
@@ -15,7 +15,7 @@
 static const __u8 root_hub_hub_des[] =
 {
 	0x09,			/*  __u8  bLength; */
-	0x29,			/*  __u8  bDescriptorType; Hub-descriptor */
+	USB_DT_HUB,		/*  __u8  bDescriptorType; Hub-descriptor */
 	0x02,			/*  __u8  bNbrPorts; */
 	HUB_CHAR_NO_LPSM |	/* __u16  wHubCharacteristics; */
 		HUB_CHAR_INDV_PORT_OCPM, /* (per-port OC, no power switching) */
-- 
cgit v1.2.3-59-g8ed1b


From 0ce6fe9e1b4666ebccb403e6fa4e8304599d50bd Mon Sep 17 00:00:00 2001
From: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Date: Sun, 29 Mar 2015 01:28:15 +0300
Subject: u132-hcd: use USB_DT_HUB

Fix  using the  bare number to set the 'bDescriptorType' field of the Hub
Descriptor while the value  is #define'd in <linux/usb/ch11.h>.

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/host/u132-hcd.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/usb')

diff --git a/drivers/usb/host/u132-hcd.c b/drivers/usb/host/u132-hcd.c
index ad97e8a1ad1c..d51687780b61 100644
--- a/drivers/usb/host/u132-hcd.c
+++ b/drivers/usb/host/u132-hcd.c
@@ -2584,7 +2584,7 @@ static int u132_roothub_descriptor(struct u132 *u132,
 	retval = u132_read_pcimem(u132, roothub.a, &rh_a);
 	if (retval)
 		return retval;
-	desc->bDescriptorType = 0x29;
+	desc->bDescriptorType = USB_DT_HUB;
 	desc->bPwrOn2PwrGood = (rh_a & RH_A_POTPGT) >> 24;
 	desc->bHubContrCurrent = 0;
 	desc->bNbrPorts = u132->num_ports;
-- 
cgit v1.2.3-59-g8ed1b


From e283ef1549f7e9de198d1a8988eff97c9e42f878 Mon Sep 17 00:00:00 2001
From: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Date: Sun, 29 Mar 2015 01:26:55 +0300
Subject: sl811-hcd: use USB_DT_HUB

Fix  using the  bare number to set the 'bDescriptorType' field of the Hub
Descriptor while the value  is #define'd in <linux/usb/ch11.h>.

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/host/sl811-hcd.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/usb')

diff --git a/drivers/usb/host/sl811-hcd.c b/drivers/usb/host/sl811-hcd.c
index f1d5c5a11705..53e4fb75b04c 100644
--- a/drivers/usb/host/sl811-hcd.c
+++ b/drivers/usb/host/sl811-hcd.c
@@ -1091,7 +1091,7 @@ sl811h_hub_descriptor (
 ) {
 	u16		temp = 0;
 
-	desc->bDescriptorType = 0x29;
+	desc->bDescriptorType = USB_DT_HUB;
 	desc->bHubContrCurrent = 0;
 
 	desc->bNbrPorts = 1;
-- 
cgit v1.2.3-59-g8ed1b


From 5e77beafb10e451b8370e8248b25207810110ed8 Mon Sep 17 00:00:00 2001
From: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Date: Sun, 29 Mar 2015 01:24:24 +0300
Subject: r8a66597-hcd: use USB_DT_HUB

Fix  using the  bare number to set the 'bDescriptorType' field of the Hub
Descriptor while the value  is #define'd in <linux/usb/ch11.h>.

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/host/r8a66597-hcd.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/usb')

diff --git a/drivers/usb/host/r8a66597-hcd.c b/drivers/usb/host/r8a66597-hcd.c
index bdc82fea0a1f..5cbaa9846ab9 100644
--- a/drivers/usb/host/r8a66597-hcd.c
+++ b/drivers/usb/host/r8a66597-hcd.c
@@ -2136,7 +2136,7 @@ static int r8a66597_hub_status_data(struct usb_hcd *hcd, char *buf)
 static void r8a66597_hub_descriptor(struct r8a66597 *r8a66597,
 				    struct usb_hub_descriptor *desc)
 {
-	desc->bDescriptorType = 0x29;
+	desc->bDescriptorType = USB_DT_HUB;
 	desc->bHubContrCurrent = 0;
 	desc->bNbrPorts = r8a66597->max_root_hub;
 	desc->bDescLength = 9;
-- 
cgit v1.2.3-59-g8ed1b


From 2c42c08774f07824ac689cf198e26ffba7831564 Mon Sep 17 00:00:00 2001
From: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Date: Sun, 29 Mar 2015 01:21:10 +0300
Subject: oxu210hp-hcd: use USB_DT_HUB

Fix  using the  bare number to set the 'bDescriptorType' field of the Hub
Descriptor while the value  is #define'd in <linux/usb/ch11.h>.

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/host/oxu210hp-hcd.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/usb')

diff --git a/drivers/usb/host/oxu210hp-hcd.c b/drivers/usb/host/oxu210hp-hcd.c
index ef7efb278b15..681ce57bf7b9 100644
--- a/drivers/usb/host/oxu210hp-hcd.c
+++ b/drivers/usb/host/oxu210hp-hcd.c
@@ -445,7 +445,7 @@ static void ehci_hub_descriptor(struct oxu_hcd *oxu,
 	int ports = HCS_N_PORTS(oxu->hcs_params);
 	u16 temp;
 
-	desc->bDescriptorType = 0x29;
+	desc->bDescriptorType = USB_DT_HUB;
 	desc->bPwrOn2PwrGood = 10;	/* oxu 1.0, 2.3.9 says 20ms max */
 	desc->bHubContrCurrent = 0;
 
-- 
cgit v1.2.3-59-g8ed1b


From 7a2d2672b89d402312b4b741544ab5fdcd48df19 Mon Sep 17 00:00:00 2001
From: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Date: Sun, 29 Mar 2015 01:19:48 +0300
Subject: ohci-hub: use USB_DT_HUB

Fix  using the  bare number to set the 'bDescriptorType' field of the Hub
Descriptor while the value  is #define'd in <linux/usb/ch11.h>.

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/host/ohci-hub.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/usb')

diff --git a/drivers/usb/host/ohci-hub.c b/drivers/usb/host/ohci-hub.c
index fe2aedd8a54d..ed678c17c4ea 100644
--- a/drivers/usb/host/ohci-hub.c
+++ b/drivers/usb/host/ohci-hub.c
@@ -536,7 +536,7 @@ ohci_hub_descriptor (
 	u32		rh = roothub_a (ohci);
 	u16		temp;
 
-	desc->bDescriptorType = 0x29;
+	desc->bDescriptorType = USB_DT_HUB;
 	desc->bPwrOn2PwrGood = (rh & RH_A_POTPGT) >> 24;
 	desc->bHubContrCurrent = 0;
 
-- 
cgit v1.2.3-59-g8ed1b


From e3d02e0e54bce76e331529dd6f47d61cecc9d375 Mon Sep 17 00:00:00 2001
From: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Date: Sun, 29 Mar 2015 01:14:03 +0300
Subject: max3421-hcd: use USB_DT_HUB

Fix  using the  bare number to set the 'bDescriptorType' field of the Hub
Descriptor while the value  is #define'd in <linux/usb/ch11.h>.

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/host/max3421-hcd.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/usb')

diff --git a/drivers/usb/host/max3421-hcd.c b/drivers/usb/host/max3421-hcd.c
index a98833cbfcf3..fc1fd403973a 100644
--- a/drivers/usb/host/max3421-hcd.c
+++ b/drivers/usb/host/max3421-hcd.c
@@ -1659,7 +1659,7 @@ hub_descriptor(struct usb_hub_descriptor *desc)
 	/*
 	 * See Table 11-13: Hub Descriptor in USB 2.0 spec.
 	 */
-	desc->bDescriptorType = 0x29;	/* hub descriptor */
+	desc->bDescriptorType = USB_DT_HUB; /* hub descriptor */
 	desc->bDescLength = 9;
 	desc->wHubCharacteristics = cpu_to_le16(HUB_CHAR_INDV_PORT_LPSM |
 						HUB_CHAR_COMMON_OCPM);
-- 
cgit v1.2.3-59-g8ed1b


From 00d29b3e9320112c3d53d6865af60492dbc29163 Mon Sep 17 00:00:00 2001
From: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Date: Sun, 29 Mar 2015 01:12:31 +0300
Subject: isp1362-hcd: use USB_DT_HUB

Fix  using the  bare number to set the 'bDescriptorType' field of the Hub
Descriptor while the value  is #define'd in <linux/usb/ch11.h>.

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/host/isp1362-hcd.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/usb')

diff --git a/drivers/usb/host/isp1362-hcd.c b/drivers/usb/host/isp1362-hcd.c
index b32ab60cad1e..6cf82ee460a6 100644
--- a/drivers/usb/host/isp1362-hcd.c
+++ b/drivers/usb/host/isp1362-hcd.c
@@ -1538,7 +1538,7 @@ static void isp1362_hub_descriptor(struct isp1362_hcd *isp1362_hcd,
 
 	DBG(3, "%s: enter\n", __func__);
 
-	desc->bDescriptorType = 0x29;
+	desc->bDescriptorType = USB_DT_HUB;
 	desc->bDescLength = 9;
 	desc->bHubContrCurrent = 0;
 	desc->bNbrPorts = reg & 0x3;
-- 
cgit v1.2.3-59-g8ed1b


From 6a0855673ea81f436625ff0e471e990e503232c9 Mon Sep 17 00:00:00 2001
From: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Date: Sun, 29 Mar 2015 01:10:43 +0300
Subject: isp116x-hcd: use USB_DT_HUB

Fix  using the  bare number to set the 'bDescriptorType' field of the Hub
Descriptor while the value  is #define'd in <linux/usb/ch11.h>.

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/host/isp116x-hcd.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/usb')

diff --git a/drivers/usb/host/isp116x-hcd.c b/drivers/usb/host/isp116x-hcd.c
index 113d0cc6cc43..aa335fa716d1 100644
--- a/drivers/usb/host/isp116x-hcd.c
+++ b/drivers/usb/host/isp116x-hcd.c
@@ -943,7 +943,7 @@ static void isp116x_hub_descriptor(struct isp116x *isp116x,
 {
 	u32 reg = isp116x->rhdesca;
 
-	desc->bDescriptorType = 0x29;
+	desc->bDescriptorType = USB_DT_HUB;
 	desc->bDescLength = 9;
 	desc->bHubContrCurrent = 0;
 	desc->bNbrPorts = (u8) (reg & 0x3);
-- 
cgit v1.2.3-59-g8ed1b


From 72cce8cb05bfe9ff545520606e51651adb1bac33 Mon Sep 17 00:00:00 2001
From: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Date: Sun, 29 Mar 2015 01:09:06 +0300
Subject: imx21-hcd: use USB_DT_HUB

Fix  using the  bare number to set the 'bDescriptorType' field of the Hub
Descriptor while the value  is #define'd in <linux/usb/ch11.h>.

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/host/imx21-hcd.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/usb')

diff --git a/drivers/usb/host/imx21-hcd.c b/drivers/usb/host/imx21-hcd.c
index 6a2ad550b120..f542045dc2a6 100644
--- a/drivers/usb/host/imx21-hcd.c
+++ b/drivers/usb/host/imx21-hcd.c
@@ -1474,7 +1474,7 @@ static int get_hub_descriptor(struct usb_hcd *hcd,
 			      struct usb_hub_descriptor *desc)
 {
 	struct imx21 *imx21 = hcd_to_imx21(hcd);
-	desc->bDescriptorType = 0x29;	/* HUB descriptor */
+	desc->bDescriptorType = USB_DT_HUB; /* HUB descriptor */
 	desc->bHubContrCurrent = 0;
 
 	desc->bNbrPorts = readl(imx21->regs + USBH_ROOTHUBA)
-- 
cgit v1.2.3-59-g8ed1b


From 87327b14621a10f0382c49ac181de7aaa5c2c88a Mon Sep 17 00:00:00 2001
From: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Date: Sun, 29 Mar 2015 01:07:43 +0300
Subject: fusbh200-hcd: use USB_DT_HUB

Fix  using the  bare number to set the 'bDescriptorType' field of the Hub
Descriptor while the value  is #define'd in <linux/usb/ch11.h>.

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/host/fusbh200-hcd.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/usb')

diff --git a/drivers/usb/host/fusbh200-hcd.c b/drivers/usb/host/fusbh200-hcd.c
index a83eefefffda..eb39a451ef06 100644
--- a/drivers/usb/host/fusbh200-hcd.c
+++ b/drivers/usb/host/fusbh200-hcd.c
@@ -1467,7 +1467,7 @@ fusbh200_hub_descriptor (
 	int		ports = HCS_N_PORTS (fusbh200->hcs_params);
 	u16		temp;
 
-	desc->bDescriptorType = 0x29;
+	desc->bDescriptorType = USB_DT_HUB;
 	desc->bPwrOn2PwrGood = 10;	/* fusbh200 1.0, 2.3.9 says 20ms max */
 	desc->bHubContrCurrent = 0;
 
-- 
cgit v1.2.3-59-g8ed1b


From 4631f4e9856efc296c1e80bcd69b3375d75bf834 Mon Sep 17 00:00:00 2001
From: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Date: Sun, 29 Mar 2015 01:06:21 +0300
Subject: fotg210-hcd: use USB_DT_HUB

Fix  using the  bare number to set the 'bDescriptorType' field of the Hub
Descriptor while the value  is #define'd in <linux/usb/ch11.h>.

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/host/fotg210-hcd.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/usb')

diff --git a/drivers/usb/host/fotg210-hcd.c b/drivers/usb/host/fotg210-hcd.c
index 475b21fd373b..af08ff12954d 100644
--- a/drivers/usb/host/fotg210-hcd.c
+++ b/drivers/usb/host/fotg210-hcd.c
@@ -1509,7 +1509,7 @@ fotg210_hub_descriptor(
 	int		ports = HCS_N_PORTS(fotg210->hcs_params);
 	u16		temp;
 
-	desc->bDescriptorType = 0x29;
+	desc->bDescriptorType = USB_DT_HUB;
 	desc->bPwrOn2PwrGood = 10;	/* fotg210 1.0, 2.3.9 says 20ms max */
 	desc->bHubContrCurrent = 0;
 
-- 
cgit v1.2.3-59-g8ed1b


From 51a114bc5d20d6540418bc40422a9631cfa73da8 Mon Sep 17 00:00:00 2001
From: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Date: Sun, 29 Mar 2015 01:04:50 +0300
Subject: fhci-hub: use USB_DT_HUB

Fix  using the  bare number to set the 'bDescriptorType' field of the Hub
Descriptor while the value  is #define'd in <linux/usb/ch11.h>.

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/host/fhci-hub.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/usb')

diff --git a/drivers/usb/host/fhci-hub.c b/drivers/usb/host/fhci-hub.c
index 70116a65262c..3bacdd7befe9 100644
--- a/drivers/usb/host/fhci-hub.c
+++ b/drivers/usb/host/fhci-hub.c
@@ -30,7 +30,7 @@
 /* virtual root hub specific descriptor */
 static u8 root_hub_des[] = {
 	0x09, /* blength */
-	0x29, /* bDescriptorType;hub-descriptor */
+	USB_DT_HUB, /* bDescriptorType;hub-descriptor */
 	0x01, /* bNbrPorts */
 	HUB_CHAR_INDV_PORT_LPSM | HUB_CHAR_NO_OCPM, /* wHubCharacteristics */
 	0x00, /* per-port power, no overcurrent */
-- 
cgit v1.2.3-59-g8ed1b


From 625a4c5910cc8aa63da2afcf662aeb2ca64458e1 Mon Sep 17 00:00:00 2001
From: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Date: Sun, 29 Mar 2015 01:03:03 +0300
Subject: ehci-hub: use USB_DT_HUB

Fix  using the  bare number to set the 'bDescriptorType' field of the Hub
Descriptor while the value  is #define'd in <linux/usb/ch11.h>.

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/host/ehci-hub.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/usb')

diff --git a/drivers/usb/host/ehci-hub.c b/drivers/usb/host/ehci-hub.c
index 87cf86f38b36..d7b4b511b5c6 100644
--- a/drivers/usb/host/ehci-hub.c
+++ b/drivers/usb/host/ehci-hub.c
@@ -688,7 +688,7 @@ ehci_hub_descriptor (
 	int		ports = HCS_N_PORTS (ehci->hcs_params);
 	u16		temp;
 
-	desc->bDescriptorType = 0x29;
+	desc->bDescriptorType = USB_DT_HUB;
 	desc->bPwrOn2PwrGood = 10;	/* ehci 1.0, 2.3.9 says 20ms max */
 	desc->bHubContrCurrent = 0;
 
-- 
cgit v1.2.3-59-g8ed1b


From d30323f810e4da94eb75cf4bfe5165b9518c64df Mon Sep 17 00:00:00 2001
From: Tony Lindgren <tony@atomide.com>
Date: Wed, 25 Mar 2015 14:18:37 -0700
Subject: usb: musb: dsps: fix build on i386 when COMPILE_TEST is set
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Commit 3e457371f436 ("usb: musb: Fix fifo reads for dm816x with musb_dsps")
fixed a USB error on dm816x, but introduced a new build error on i386
when COMPILE_TEST is set:

drivers/usb/musb/musb_dsps.c: In function ‘dsps_read_fifo32’:
drivers/usb/musb/musb_dsps.c:624:3: error: implicit declaration of function
‘readsl’ [-Werror=implicit-function-declaration]
readsl(fifo, dst, len >> 2);

Let's fix this by using ioread32_rep() instead of readsl() as that's
more portable.

Fixes: 3e457371f436 ("usb: musb: Fix fifo reads for dm816x with musb_dsps")
Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Cc: Bin Liu <binmlist@gmail.com>
Cc: Brian Hutchinson <b.hutchman@gmail.com>
Cc: George Cherian <george.cherian@ti.com>
Cc: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/musb/musb_dsps.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/usb')

diff --git a/drivers/usb/musb/musb_dsps.c b/drivers/usb/musb/musb_dsps.c
index b23ad150a165..65d931a28a14 100644
--- a/drivers/usb/musb/musb_dsps.c
+++ b/drivers/usb/musb/musb_dsps.c
@@ -621,7 +621,7 @@ static void dsps_read_fifo32(struct musb_hw_ep *hw_ep, u16 len, u8 *dst)
 	void __iomem *fifo = hw_ep->fifo;
 
 	if (len >= 4) {
-		readsl(fifo, dst, len >> 2);
+		ioread32_rep(fifo, dst, len >> 2);
 		dst += len & ~0x03;
 		len &= 0x03;
 	}
-- 
cgit v1.2.3-59-g8ed1b


From b9e451885deb6262dbaf5cd14aa77d192d9ac759 Mon Sep 17 00:00:00 2001
From: Felipe Balbi <balbi@ti.com>
Date: Fri, 13 Feb 2015 14:39:13 -0600
Subject: usb: host: xhci: use new USB_RESUME_TIMEOUT

Make sure we're using the new macro, so our
resume signaling will always pass certification.

Cc: <stable@vger.kernel.org> # v3.10+
Acked-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
---
 drivers/usb/host/xhci-ring.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/usb')

diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
index 5fb66db89e05..23304817a89a 100644
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -1574,7 +1574,7 @@ static void handle_port_status(struct xhci_hcd *xhci,
 		} else {
 			xhci_dbg(xhci, "resume HS port %d\n", port_id);
 			bus_state->resume_done[faked_port_index] = jiffies +
-				msecs_to_jiffies(20);
+				msecs_to_jiffies(USB_RESUME_TIMEOUT);
 			set_bit(faked_port_index, &bus_state->resuming_ports);
 			mod_timer(&hcd->rh_timer,
 				  bus_state->resume_done[faked_port_index]);
-- 
cgit v1.2.3-59-g8ed1b


From ea16328f80ca8d74434352157f37ef60e2f55ce2 Mon Sep 17 00:00:00 2001
From: Felipe Balbi <balbi@ti.com>
Date: Fri, 13 Feb 2015 14:42:25 -0600
Subject: usb: host: ehci: use new USB_RESUME_TIMEOUT

Make sure we're using the new macro, so our
resume signaling will always pass certification.

Cc: <stable@vger.kernel.org> # v3.10+
Signed-off-by: Felipe Balbi <balbi@ti.com>
---
 drivers/usb/host/ehci-hcd.c | 10 +++++-----
 drivers/usb/host/ehci-hub.c |  9 ++++++---
 2 files changed, 11 insertions(+), 8 deletions(-)

(limited to 'drivers/usb')

diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c
index 85e56d1abd23..f4d88dfb26a7 100644
--- a/drivers/usb/host/ehci-hcd.c
+++ b/drivers/usb/host/ehci-hcd.c
@@ -792,12 +792,12 @@ static irqreturn_t ehci_irq (struct usb_hcd *hcd)
 					ehci->reset_done[i] == 0))
 				continue;
 
-			/* start 20 msec resume signaling from this port,
-			 * and make hub_wq collect PORT_STAT_C_SUSPEND to
-			 * stop that signaling.  Use 5 ms extra for safety,
-			 * like usb_port_resume() does.
+			/* start USB_RESUME_TIMEOUT msec resume signaling from
+			 * this port, and make hub_wq collect
+			 * PORT_STAT_C_SUSPEND to stop that signaling.
 			 */
-			ehci->reset_done[i] = jiffies + msecs_to_jiffies(25);
+			ehci->reset_done[i] = jiffies +
+				msecs_to_jiffies(USB_RESUME_TIMEOUT);
 			set_bit(i, &ehci->resuming_ports);
 			ehci_dbg (ehci, "port %d remote wakeup\n", i + 1);
 			usb_hcd_start_port_resume(&hcd->self, i);
diff --git a/drivers/usb/host/ehci-hub.c b/drivers/usb/host/ehci-hub.c
index 87cf86f38b36..7354d0129a72 100644
--- a/drivers/usb/host/ehci-hub.c
+++ b/drivers/usb/host/ehci-hub.c
@@ -471,10 +471,13 @@ static int ehci_bus_resume (struct usb_hcd *hcd)
 		ehci_writel(ehci, temp, &ehci->regs->port_status [i]);
 	}
 
-	/* msleep for 20ms only if code is trying to resume port */
+	/*
+	 * msleep for USB_RESUME_TIMEOUT ms only if code is trying to resume
+	 * port
+	 */
 	if (resume_needed) {
 		spin_unlock_irq(&ehci->lock);
-		msleep(20);
+		msleep(USB_RESUME_TIMEOUT);
 		spin_lock_irq(&ehci->lock);
 		if (ehci->shutdown)
 			goto shutdown;
@@ -942,7 +945,7 @@ int ehci_hub_control(
 			temp &= ~PORT_WAKE_BITS;
 			ehci_writel(ehci, temp | PORT_RESUME, status_reg);
 			ehci->reset_done[wIndex] = jiffies
-					+ msecs_to_jiffies(20);
+					+ msecs_to_jiffies(USB_RESUME_TIMEOUT);
 			set_bit(wIndex, &ehci->resuming_ports);
 			usb_hcd_start_port_resume(&hcd->self, wIndex);
 			break;
-- 
cgit v1.2.3-59-g8ed1b


From b8fb6f79f76f478acbbffccc966daa878f172a0a Mon Sep 17 00:00:00 2001
From: Felipe Balbi <balbi@ti.com>
Date: Fri, 13 Feb 2015 14:44:17 -0600
Subject: usb: host: uhci: use new USB_RESUME_TIMEOUT

Make sure we're using the new macro, so our
resume signaling will always pass certification.

Cc: <stable@vger.kernel.org> # v3.10+
Signed-off-by: Felipe Balbi <balbi@ti.com>
---
 drivers/usb/host/uhci-hub.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

(limited to 'drivers/usb')

diff --git a/drivers/usb/host/uhci-hub.c b/drivers/usb/host/uhci-hub.c
index 19ba5eafb31e..7b3d1afcc14a 100644
--- a/drivers/usb/host/uhci-hub.c
+++ b/drivers/usb/host/uhci-hub.c
@@ -166,7 +166,7 @@ static void uhci_check_ports(struct uhci_hcd *uhci)
 				/* Port received a wakeup request */
 				set_bit(port, &uhci->resuming_ports);
 				uhci->ports_timeout = jiffies +
-						msecs_to_jiffies(25);
+					msecs_to_jiffies(USB_RESUME_TIMEOUT);
 				usb_hcd_start_port_resume(
 						&uhci_to_hcd(uhci)->self, port);
 
@@ -338,7 +338,8 @@ static int uhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
 			uhci_finish_suspend(uhci, port, port_addr);
 
 			/* USB v2.0 7.1.7.5 */
-			uhci->ports_timeout = jiffies + msecs_to_jiffies(50);
+			uhci->ports_timeout = jiffies +
+				msecs_to_jiffies(USB_RESUME_TIMEOUT);
 			break;
 		case USB_PORT_FEAT_POWER:
 			/* UHCI has no power switching */
-- 
cgit v1.2.3-59-g8ed1b


From 309be239369609929d5d3833ee043f7c5afc95d1 Mon Sep 17 00:00:00 2001
From: Felipe Balbi <balbi@ti.com>
Date: Fri, 13 Feb 2015 14:46:27 -0600
Subject: usb: musb: use new USB_RESUME_TIMEOUT

Make sure we're using the new macro, so our
resume signaling will always pass certification.

Based on original work by Bin Liu <Bin Liu <b-liu@ti.com>>

Cc: Bin Liu <b-liu@ti.com>
Cc: <stable@vger.kernel.org> # v3.10+
Signed-off-by: Felipe Balbi <balbi@ti.com>
---
 drivers/usb/musb/musb_core.c    | 7 ++++---
 drivers/usb/musb/musb_virthub.c | 2 +-
 2 files changed, 5 insertions(+), 4 deletions(-)

(limited to 'drivers/usb')

diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c
index a48b5a9c6c47..3789b08ef67b 100644
--- a/drivers/usb/musb/musb_core.c
+++ b/drivers/usb/musb/musb_core.c
@@ -99,6 +99,7 @@
 #include <linux/platform_device.h>
 #include <linux/io.h>
 #include <linux/dma-mapping.h>
+#include <linux/usb.h>
 
 #include "musb_core.h"
 
@@ -549,7 +550,7 @@ static irqreturn_t musb_stage0_irq(struct musb *musb, u8 int_usb,
 						(USB_PORT_STAT_C_SUSPEND << 16)
 						| MUSB_PORT_STAT_RESUME;
 				musb->rh_timer = jiffies
-						 + msecs_to_jiffies(20);
+					+ msecs_to_jiffies(USB_RESUME_TIMEOUT);
 				musb->need_finish_resume = 1;
 
 				musb->xceiv->otg->state = OTG_STATE_A_HOST;
@@ -2463,7 +2464,7 @@ static int musb_resume(struct device *dev)
 	if (musb->need_finish_resume) {
 		musb->need_finish_resume = 0;
 		schedule_delayed_work(&musb->finish_resume_work,
-				      msecs_to_jiffies(20));
+				      msecs_to_jiffies(USB_RESUME_TIMEOUT));
 	}
 
 	/*
@@ -2506,7 +2507,7 @@ static int musb_runtime_resume(struct device *dev)
 	if (musb->need_finish_resume) {
 		musb->need_finish_resume = 0;
 		schedule_delayed_work(&musb->finish_resume_work,
-				msecs_to_jiffies(20));
+				msecs_to_jiffies(USB_RESUME_TIMEOUT));
 	}
 
 	return 0;
diff --git a/drivers/usb/musb/musb_virthub.c b/drivers/usb/musb/musb_virthub.c
index 294e159f4afe..5428ed11440d 100644
--- a/drivers/usb/musb/musb_virthub.c
+++ b/drivers/usb/musb/musb_virthub.c
@@ -136,7 +136,7 @@ void musb_port_suspend(struct musb *musb, bool do_suspend)
 		/* later, GetPortStatus will stop RESUME signaling */
 		musb->port1_status |= MUSB_PORT_STAT_RESUME;
 		schedule_delayed_work(&musb->finish_resume_work,
-				      msecs_to_jiffies(20));
+				      msecs_to_jiffies(USB_RESUME_TIMEOUT));
 	}
 }
 
-- 
cgit v1.2.3-59-g8ed1b


From 8c0ae6574ccfd3d619876a65829aad74c9d22ba5 Mon Sep 17 00:00:00 2001
From: Felipe Balbi <balbi@ti.com>
Date: Fri, 13 Feb 2015 14:50:10 -0600
Subject: usb: host: isp116x: use new USB_RESUME_TIMEOUT

Make sure we're using the new macro, so our
resume signaling will always pass certification.

Cc: <stable@vger.kernel.org> # v3.10+
Signed-off-by: Felipe Balbi <balbi@ti.com>
---
 drivers/usb/host/isp116x-hcd.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/usb')

diff --git a/drivers/usb/host/isp116x-hcd.c b/drivers/usb/host/isp116x-hcd.c
index 113d0cc6cc43..9ef56443446d 100644
--- a/drivers/usb/host/isp116x-hcd.c
+++ b/drivers/usb/host/isp116x-hcd.c
@@ -1490,7 +1490,7 @@ static int isp116x_bus_resume(struct usb_hcd *hcd)
 	spin_unlock_irq(&isp116x->lock);
 
 	hcd->state = HC_STATE_RESUMING;
-	msleep(20);
+	msleep(USB_RESUME_TIMEOUT);
 
 	/* Go operational */
 	spin_lock_irq(&isp116x->lock);
-- 
cgit v1.2.3-59-g8ed1b


From 7e136bb71a08e8b8be3bc492f041d9b0bea3856d Mon Sep 17 00:00:00 2001
From: Felipe Balbi <balbi@ti.com>
Date: Fri, 13 Feb 2015 14:54:38 -0600
Subject: usb: host: fotg210: use new USB_RESUME_TIMEOUT

Make sure we're using the new macro, so our
resume signaling will always pass certification.

Cc: <stable@vger.kernel.org> # v3.10+
Signed-off-by: Felipe Balbi <balbi@ti.com>
---
 drivers/usb/host/fotg210-hcd.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/usb')

diff --git a/drivers/usb/host/fotg210-hcd.c b/drivers/usb/host/fotg210-hcd.c
index 475b21fd373b..7a6681fb7675 100644
--- a/drivers/usb/host/fotg210-hcd.c
+++ b/drivers/usb/host/fotg210-hcd.c
@@ -1595,7 +1595,7 @@ static int fotg210_hub_control(
 			/* resume signaling for 20 msec */
 			fotg210_writel(fotg210, temp | PORT_RESUME, status_reg);
 			fotg210->reset_done[wIndex] = jiffies
-					+ msecs_to_jiffies(20);
+					+ msecs_to_jiffies(USB_RESUME_TIMEOUT);
 			break;
 		case USB_PORT_FEAT_C_SUSPEND:
 			clear_bit(wIndex, &fotg210->port_c_suspend);
-- 
cgit v1.2.3-59-g8ed1b


From 595227db1f2d98bfc33f02a55842f268e12b247d Mon Sep 17 00:00:00 2001
From: Felipe Balbi <balbi@ti.com>
Date: Fri, 13 Feb 2015 14:55:34 -0600
Subject: usb: host: fusbh200: use new USB_RESUME_TIMEOUT

Make sure we're using the new macro, so our
resume signaling will always pass certification.

Cc: <stable@vger.kernel.org> # v3.10+
Signed-off-by: Felipe Balbi <balbi@ti.com>
---
 drivers/usb/host/fusbh200-hcd.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

(limited to 'drivers/usb')

diff --git a/drivers/usb/host/fusbh200-hcd.c b/drivers/usb/host/fusbh200-hcd.c
index a83eefefffda..ba77e2e43f62 100644
--- a/drivers/usb/host/fusbh200-hcd.c
+++ b/drivers/usb/host/fusbh200-hcd.c
@@ -1550,10 +1550,9 @@ static int fusbh200_hub_control (
 			if ((temp & PORT_PE) == 0)
 				goto error;
 
-			/* resume signaling for 20 msec */
 			fusbh200_writel(fusbh200, temp | PORT_RESUME, status_reg);
 			fusbh200->reset_done[wIndex] = jiffies
-					+ msecs_to_jiffies(20);
+					+ msecs_to_jiffies(USB_RESUME_TIMEOUT);
 			break;
 		case USB_PORT_FEAT_C_SUSPEND:
 			clear_bit(wIndex, &fusbh200->port_c_suspend);
-- 
cgit v1.2.3-59-g8ed1b


From 84c0d178eb9f3a3ae4d63dc97a440266cf17f7f5 Mon Sep 17 00:00:00 2001
From: Felipe Balbi <balbi@ti.com>
Date: Fri, 13 Feb 2015 14:57:54 -0600
Subject: usb: host: oxu210hp: use new USB_RESUME_TIMEOUT

Make sure we're using the new macro, so our
resume signaling will always pass certification.

Cc: <stable@vger.kernel.org> # v3.10+
Signed-off-by: Felipe Balbi <balbi@ti.com>
---
 drivers/usb/host/oxu210hp-hcd.c | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

(limited to 'drivers/usb')

diff --git a/drivers/usb/host/oxu210hp-hcd.c b/drivers/usb/host/oxu210hp-hcd.c
index ef7efb278b15..28a2866b6b16 100644
--- a/drivers/usb/host/oxu210hp-hcd.c
+++ b/drivers/usb/host/oxu210hp-hcd.c
@@ -2500,11 +2500,12 @@ static irqreturn_t oxu210_hcd_irq(struct usb_hcd *hcd)
 					|| oxu->reset_done[i] != 0)
 				continue;
 
-			/* start 20 msec resume signaling from this port,
-			 * and make hub_wq collect PORT_STAT_C_SUSPEND to
+			/* start USB_RESUME_TIMEOUT resume signaling from this
+			 * port, and make hub_wq collect PORT_STAT_C_SUSPEND to
 			 * stop that signaling.
 			 */
-			oxu->reset_done[i] = jiffies + msecs_to_jiffies(20);
+			oxu->reset_done[i] = jiffies +
+				msecs_to_jiffies(USB_RESUME_TIMEOUT);
 			oxu_dbg(oxu, "port %d remote wakeup\n", i + 1);
 			mod_timer(&hcd->rh_timer, oxu->reset_done[i]);
 		}
-- 
cgit v1.2.3-59-g8ed1b


From 7a606ac29752a3e571b83f9b3fceb1eaa1d37781 Mon Sep 17 00:00:00 2001
From: Felipe Balbi <balbi@ti.com>
Date: Fri, 13 Feb 2015 14:58:53 -0600
Subject: usb: host: r8a66597: use new USB_RESUME_TIMEOUT

While this driver was already using a 50ms resume
timeout, let's make sure everybody uses the same
macro so it's easy to fix later should anything
go wrong.

It also gives a more "stable" expectation to Linux
users.

Cc: <stable@vger.kernel.org> # v3.10+
Signed-off-by: Felipe Balbi <balbi@ti.com>
---
 drivers/usb/host/r8a66597-hcd.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/usb')

diff --git a/drivers/usb/host/r8a66597-hcd.c b/drivers/usb/host/r8a66597-hcd.c
index bdc82fea0a1f..54a417043e44 100644
--- a/drivers/usb/host/r8a66597-hcd.c
+++ b/drivers/usb/host/r8a66597-hcd.c
@@ -2301,7 +2301,7 @@ static int r8a66597_bus_resume(struct usb_hcd *hcd)
 		rh->port &= ~USB_PORT_STAT_SUSPEND;
 		rh->port |= USB_PORT_STAT_C_SUSPEND << 16;
 		r8a66597_mdfy(r8a66597, RESUME, RESUME | UACT, dvstctr_reg);
-		msleep(50);
+		msleep(USB_RESUME_TIMEOUT);
 		r8a66597_mdfy(r8a66597, UACT, RESUME | UACT, dvstctr_reg);
 	}
 
-- 
cgit v1.2.3-59-g8ed1b


From 08debfb13b199716da6153940c31968c556b195d Mon Sep 17 00:00:00 2001
From: Felipe Balbi <balbi@ti.com>
Date: Fri, 13 Feb 2015 15:00:38 -0600
Subject: usb: host: sl811: use new USB_RESUME_TIMEOUT

Make sure we're using the new macro, so our
resume signaling will always pass certification.

Cc: <stable@vger.kernel.org> # v3.10+
Signed-off-by: Felipe Balbi <balbi@ti.com>
---
 drivers/usb/host/sl811-hcd.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/usb')

diff --git a/drivers/usb/host/sl811-hcd.c b/drivers/usb/host/sl811-hcd.c
index 4f4ba1ea9e9b..9118cd8de1a7 100644
--- a/drivers/usb/host/sl811-hcd.c
+++ b/drivers/usb/host/sl811-hcd.c
@@ -1259,7 +1259,7 @@ sl811h_hub_control(
 			sl811_write(sl811, SL11H_CTLREG1, sl811->ctrl1);
 
 			mod_timer(&sl811->timer, jiffies
-					+ msecs_to_jiffies(20));
+					+ msecs_to_jiffies(USB_RESUME_TIMEOUT));
 			break;
 		case USB_PORT_FEAT_POWER:
 			port_power(sl811, 0);
-- 
cgit v1.2.3-59-g8ed1b


From 74bd7b69801819707713b88e9d0bc074efa2f5e7 Mon Sep 17 00:00:00 2001
From: Felipe Balbi <balbi@ti.com>
Date: Fri, 13 Feb 2015 15:03:13 -0600
Subject: usb: dwc2: hcd: use new USB_RESUME_TIMEOUT

Make sure we're using the new macro, so our
resume signaling will always pass certification.

Cc: <stable@vger.kernel.org> # v3.10+
Signed-off-by: Felipe Balbi <balbi@ti.com>
---
 drivers/usb/dwc2/hcd.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/usb')

diff --git a/drivers/usb/dwc2/hcd.c b/drivers/usb/dwc2/hcd.c
index 559b55e5debb..545e094e7449 100644
--- a/drivers/usb/dwc2/hcd.c
+++ b/drivers/usb/dwc2/hcd.c
@@ -1529,7 +1529,7 @@ static int dwc2_hcd_hub_control(struct dwc2_hsotg *hsotg, u16 typereq,
 			dev_dbg(hsotg->dev,
 				"ClearPortFeature USB_PORT_FEAT_SUSPEND\n");
 			writel(0, hsotg->regs + PCGCTL);
-			usleep_range(20000, 40000);
+			msleep(USB_RESUME_TIMEOUT);
 
 			hprt0 = dwc2_read_hprt0(hsotg);
 			hprt0 |= HPRT0_RES;
-- 
cgit v1.2.3-59-g8ed1b


From 59c9904cce77b55892e15f40791f1e66e4d3a1e6 Mon Sep 17 00:00:00 2001
From: Felipe Balbi <balbi@ti.com>
Date: Fri, 13 Feb 2015 15:04:06 -0600
Subject: usb: isp1760: hcd: use new USB_RESUME_TIMEOUT

Make sure we're using the new macro, so our
resume signaling will always pass certification.

Cc: <stable@vger.kernel.org> # v3.10+
Signed-off-by: Felipe Balbi <balbi@ti.com>
---
 drivers/usb/isp1760/isp1760-hcd.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/usb')

diff --git a/drivers/usb/isp1760/isp1760-hcd.c b/drivers/usb/isp1760/isp1760-hcd.c
index 3cb98b1d5d29..7911b6b6fe40 100644
--- a/drivers/usb/isp1760/isp1760-hcd.c
+++ b/drivers/usb/isp1760/isp1760-hcd.c
@@ -1869,7 +1869,7 @@ static int isp1760_hub_control(struct usb_hcd *hcd, u16 typeReq,
 				reg_write32(hcd->regs, HC_PORTSC1,
 							temp | PORT_RESUME);
 				priv->reset_done = jiffies +
-					msecs_to_jiffies(20);
+					msecs_to_jiffies(USB_RESUME_TIMEOUT);
 			}
 			break;
 		case USB_PORT_FEAT_C_SUSPEND:
-- 
cgit v1.2.3-59-g8ed1b


From bbc78c07a51f6fd29c227b1220a9016e585358ba Mon Sep 17 00:00:00 2001
From: Felipe Balbi <balbi@ti.com>
Date: Fri, 13 Feb 2015 15:38:33 -0600
Subject: usb: core: hub: use new USB_RESUME_TIMEOUT

Make sure we're using the new macro, so our
resume signaling will always pass certification.

Cc: <stable@vger.kernel.org> # v3.10+
Signed-off-by: Felipe Balbi <balbi@ti.com>
---
 drivers/usb/core/hub.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'drivers/usb')

diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index d7c3d5a35946..3b7151687776 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -3406,10 +3406,10 @@ int usb_port_resume(struct usb_device *udev, pm_message_t msg)
 	if (status) {
 		dev_dbg(&port_dev->dev, "can't resume, status %d\n", status);
 	} else {
-		/* drive resume for at least 20 msec */
+		/* drive resume for USB_RESUME_TIMEOUT msec */
 		dev_dbg(&udev->dev, "usb %sresume\n",
 				(PMSG_IS_AUTO(msg) ? "auto-" : ""));
-		msleep(25);
+		msleep(USB_RESUME_TIMEOUT);
 
 		/* Virtual root hubs can trigger on GET_PORT_STATUS to
 		 * stop resume signaling.  Then finish the resume
-- 
cgit v1.2.3-59-g8ed1b


From 9b6567e19bc55187bc1bb094b00a9f63acb30071 Mon Sep 17 00:00:00 2001
From: Li Jun <jun.li@freescale.com>
Date: Mon, 23 Mar 2015 16:03:35 +0800
Subject: usb: chipidea: udc: bypass pullup DP when gadget connect in OTG fsm
 mode

By pass pullup DP in OTG fsm mode when do gadget connect, to let it handled
by OTG state machine.

This patch can fix the problem you found with my HNP polling patchset after
below 3 patches introduced:
467a78c usb: chipidea: udc: apply new usb_udc_vbus_handler interface
628ef0d usb: udc: add usb_udc_vbus_handler
dfea9c9 usb: udc: store usb_udc pointer in struct usb_gadget

Problem:
- Connect USB cable and MicroAB cable between two boards
- Boot up two boards
- load g_mass_storage at B-device side, the enumeration will success,
and A will see a usb mass-storage device
- load g_mass_storage at A-device side, the problem has occurred, the
connection will be lost at the beginning, then connect again.

This patch is based on
commit eff933c1d3a2e046492b3dfc86db813856553a29
(chipidea: pci: make it depends on NOP_USB_XCEIV)
on branch peter-usb-dev of
git://git.kernel.org/pub/scm/linux/kernel/git/peter.chen/usb.git

Signed-off-by: Li Jun <jun.li@freescale.com>
Signed-off-by: Peter Chen <peter.chen@freescale.com>
---
 drivers/usb/chipidea/udc.c | 4 ++++
 1 file changed, 4 insertions(+)

(limited to 'drivers/usb')

diff --git a/drivers/usb/chipidea/udc.c b/drivers/usb/chipidea/udc.c
index 41914a55055d..764f668d45a9 100644
--- a/drivers/usb/chipidea/udc.c
+++ b/drivers/usb/chipidea/udc.c
@@ -1574,6 +1574,10 @@ static int ci_udc_pullup(struct usb_gadget *_gadget, int is_on)
 {
 	struct ci_hdrc *ci = container_of(_gadget, struct ci_hdrc, gadget);
 
+	/* Data+ pullup controlled by OTG state machine in OTG fsm mode */
+	if (ci_otg_is_fsm_mode(ci))
+		return 0;
+
 	pm_runtime_get_sync(&ci->gadget.dev);
 	if (is_on)
 		hw_write(ci, OP_USBCMD, USBCMD_RS, USBCMD_RS);
-- 
cgit v1.2.3-59-g8ed1b


From 0c4d6af42d8375e003f0e4626f2f661862b5df4b Mon Sep 17 00:00:00 2001
From: Li Jun <jun.li@freescale.com>
Date: Fri, 27 Mar 2015 19:43:01 +0800
Subject: usb: chipidea: debug: add low power mode check before print registers

Since the required clock to access registers is gated off in low power mode,
add ci->in_lpm check before try to dump registers value.

Signed-off-by: Li Jun <jun.li@freescale.com>
Signed-off-by: Peter Chen <peter.chen@freescale.com>
---
 drivers/usb/chipidea/debug.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'drivers/usb')

diff --git a/drivers/usb/chipidea/debug.c b/drivers/usb/chipidea/debug.c
index 268e4236e84c..dfb05edcdb96 100644
--- a/drivers/usb/chipidea/debug.c
+++ b/drivers/usb/chipidea/debug.c
@@ -336,8 +336,8 @@ static int ci_registers_show(struct seq_file *s, void *unused)
 	struct ci_hdrc *ci = s->private;
 	u32 tmp_reg;
 
-	if (!ci)
-		return 0;
+	if (!ci || ci->in_lpm)
+		return -EPERM;
 
 	/* ------ Registers ----- */
 	tmp_reg = hw_read_intr_enable(ci);
-- 
cgit v1.2.3-59-g8ed1b


From 42a6630a875c17b8ad129d2cc0472217107147ad Mon Sep 17 00:00:00 2001
From: Gregory Herrero <gregory.herrero@intel.com>
Date: Fri, 3 Apr 2015 10:53:25 +0200
Subject: usb: dwc2: host: sleep USB_RESUME_TIMEOUT during resume

msleep(USB_RESUME_TIMEOUT) must be done when the controller drives
the resume. This is true after HPRT0_RES is written.
Moreover, restore the delay after controller power is up.

Signed-off-by: Gregory Herrero <gregory.herrero@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/dwc2/hcd.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'drivers/usb')

diff --git a/drivers/usb/dwc2/hcd.c b/drivers/usb/dwc2/hcd.c
index 93bd4a10ab52..fbbbac2150a5 100644
--- a/drivers/usb/dwc2/hcd.c
+++ b/drivers/usb/dwc2/hcd.c
@@ -1529,13 +1529,13 @@ static int dwc2_hcd_hub_control(struct dwc2_hsotg *hsotg, u16 typereq,
 			dev_dbg(hsotg->dev,
 				"ClearPortFeature USB_PORT_FEAT_SUSPEND\n");
 			writel(0, hsotg->regs + PCGCTL);
-			msleep(USB_RESUME_TIMEOUT);
+			usleep_range(20000, 40000);
 
 			hprt0 = dwc2_read_hprt0(hsotg);
 			hprt0 |= HPRT0_RES;
 			writel(hprt0, hsotg->regs + HPRT0);
 			hprt0 &= ~HPRT0_SUSP;
-			usleep_range(100000, 150000);
+			msleep(USB_RESUME_TIMEOUT);
 
 			hprt0 &= ~HPRT0_RES;
 			writel(hprt0, hsotg->regs + HPRT0);
-- 
cgit v1.2.3-59-g8ed1b


From 00fe52deb45b1a5ef42b0aa82e632e2df012eddc Mon Sep 17 00:00:00 2001
From: Chase Metzger <chasemetzger15@gmail.com>
Date: Thu, 9 Apr 2015 21:41:52 -0700
Subject: drivers/usb/core: devio.c: Removed an uneeded space before tab

Ran checkpatch.pl on file and removed a warning about an unwanted space before
a tab.

Signed-off-by: Chase Metzger <chasemetzger15@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/core/devio.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/usb')

diff --git a/drivers/usb/core/devio.c b/drivers/usb/core/devio.c
index 11635537c052..4b0448c26810 100644
--- a/drivers/usb/core/devio.c
+++ b/drivers/usb/core/devio.c
@@ -2408,7 +2408,7 @@ static int usbdev_notify(struct notifier_block *self,
 }
 
 static struct notifier_block usbdev_nb = {
-	.notifier_call = 	usbdev_notify,
+	.notifier_call =	usbdev_notify,
 };
 
 static struct cdev usb_device_cdev;
-- 
cgit v1.2.3-59-g8ed1b