From a4bd25259e9744948a408c5d2ee575a9f1888fb4 Mon Sep 17 00:00:00 2001 From: "Enrico Weigelt, metux IT consult" Date: Mon, 1 Apr 2019 17:46:57 +0200 Subject: drivers: video: fbdev: Kconfig: pedantic cleanups Formatting of Kconfig files doesn't look so pretty, so let the Great White Handkerchief come around and clean it up. Signed-off-by: Enrico Weigelt, metux IT consult [b.zolnierkie: add missing patch description] Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/video/fbdev/Kconfig | 288 +++++++++++----------- drivers/video/fbdev/mmp/Kconfig | 6 +- drivers/video/fbdev/omap/Kconfig | 20 +- drivers/video/fbdev/omap2/omapfb/Kconfig | 18 +- drivers/video/fbdev/omap2/omapfb/displays/Kconfig | 40 +-- drivers/video/fbdev/omap2/omapfb/dss/Kconfig | 6 +- 6 files changed, 188 insertions(+), 190 deletions(-) (limited to 'drivers/video') diff --git a/drivers/video/fbdev/Kconfig b/drivers/video/fbdev/Kconfig index 7bb50c3e7226..8fae27903eb8 100644 --- a/drivers/video/fbdev/Kconfig +++ b/drivers/video/fbdev/Kconfig @@ -45,25 +45,25 @@ menuconfig FB device-aware may cause unexpected results. If unsure, say N. config FIRMWARE_EDID - bool "Enable firmware EDID" - depends on FB - ---help--- - This enables access to the EDID transferred from the firmware. - On the i386, this is from the Video BIOS. Enable this if DDC/I2C - transfers do not work for your driver and if you are using - nvidiafb, i810fb or savagefb. - - In general, choosing Y for this option is safe. If you - experience extremely long delays while booting before you get - something on your display, try setting this to N. Matrox cards in - combination with certain motherboards and monitors are known to - suffer from this problem. + bool "Enable firmware EDID" + depends on FB + ---help--- + This enables access to the EDID transferred from the firmware. + On the i386, this is from the Video BIOS. Enable this if DDC/I2C + transfers do not work for your driver and if you are using + nvidiafb, i810fb or savagefb. + + In general, choosing Y for this option is safe. If you + experience extremely long delays while booting before you get + something on your display, try setting this to N. Matrox cards in + combination with certain motherboards and monitors are known to + suffer from this problem. config FB_DDC - tristate - depends on FB - select I2C_ALGOBIT - select I2C + tristate + depends on FB + select I2C_ALGOBIT + select I2C config FB_BOOT_VESA_SUPPORT bool @@ -160,8 +160,8 @@ config FB_LITTLE_ENDIAN endchoice config FB_SYS_FOPS - tristate - depends on FB + tristate + depends on FB config FB_DEFERRED_IO bool @@ -180,8 +180,8 @@ config FB_SVGALIB cards. config FB_MACMODES - tristate - depends on FB + tristate + depends on FB config FB_BACKLIGHT tristate @@ -190,31 +190,31 @@ config FB_BACKLIGHT select BACKLIGHT_CLASS_DEVICE config FB_MODE_HELPERS - bool "Enable Video Mode Handling Helpers" - depends on FB + bool "Enable Video Mode Handling Helpers" + depends on FB ---help--- This enables functions for handling video modes using the Generalized Timing Formula and the EDID parser. A few drivers rely - on this feature such as the radeonfb, rivafb, and the i810fb. If + on this feature such as the radeonfb, rivafb, and the i810fb. If your driver does not take advantage of this feature, choosing Y will just increase the kernel size by about 5K. config FB_TILEBLITTING - bool "Enable Tile Blitting Support" - depends on FB - ---help--- - This enables tile blitting. Tile blitting is a drawing technique - where the screen is divided into rectangular sections (tiles), whereas - the standard blitting divides the screen into pixels. Because the - default drawing element is a tile, drawing functions will be passed - parameters in terms of number of tiles instead of number of pixels. - For example, to draw a single character, instead of using bitmaps, - an index to an array of bitmaps will be used. To clear or move a - rectangular section of a screen, the rectangle will be described in - terms of number of tiles in the x- and y-axis. - - This is particularly important to one driver, matroxfb. If - unsure, say N. + bool "Enable Tile Blitting Support" + depends on FB + ---help--- + This enables tile blitting. Tile blitting is a drawing technique + where the screen is divided into rectangular sections (tiles), whereas + the standard blitting divides the screen into pixels. Because the + default drawing element is a tile, drawing functions will be passed + parameters in terms of number of tiles instead of number of pixels. + For example, to draw a single character, instead of using bitmaps, + an index to an array of bitmaps will be used. To clear or move a + rectangular section of a screen, the rectangle will be described in + terms of number of tiles in the x- and y-axis. + + This is particularly important to one driver, matroxfb. If + unsure, say N. comment "Frame buffer hardware drivers" depends on FB @@ -226,7 +226,7 @@ config FB_GRVGA select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT ---help--- - This enables support for the SVGACTRL framebuffer in the GRLIB IP library from Aeroflex Gaisler. + This enables support for the SVGACTRL framebuffer in the GRLIB IP library from Aeroflex Gaisler. config FB_CIRRUS tristate "Cirrus Logic support" @@ -655,17 +655,17 @@ config FB_EFI using the EFI framebuffer as your console. config FB_N411 - tristate "N411 Apollo/Hecuba devkit support" - depends on FB && X86 && MMU - select FB_SYS_FILLRECT - select FB_SYS_COPYAREA - select FB_SYS_IMAGEBLIT - select FB_SYS_FOPS - select FB_DEFERRED_IO - select FB_HECUBA - help - This enables support for the Apollo display controller in its - Hecuba form using the n411 devkit. + tristate "N411 Apollo/Hecuba devkit support" + depends on FB && X86 && MMU + select FB_SYS_FILLRECT + select FB_SYS_COPYAREA + select FB_SYS_IMAGEBLIT + select FB_SYS_FOPS + select FB_DEFERRED_IO + select FB_HECUBA + help + This enables support for the Apollo display controller in its + Hecuba form using the n411 devkit. config FB_HGA tristate "Hercules mono graphics support" @@ -685,7 +685,7 @@ config FB_GBE select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT - help + help This is the frame buffer device driver for SGI Graphics Backend. This chip is used in SGI O2 and Visual Workstation 320/540. @@ -897,10 +897,10 @@ config FB_NVIDIA module will be called nvidiafb. config FB_NVIDIA_I2C - bool "Enable DDC Support" - depends on FB_NVIDIA - select FB_DDC - help + bool "Enable DDC Support" + depends on FB_NVIDIA + select FB_DDC + help This enables I2C support for nVidia Chipsets. This is used only for getting EDID information from the attached display allowing for robust video mode handling and switching. @@ -943,10 +943,10 @@ config FB_RIVA module will be called rivafb. config FB_RIVA_I2C - bool "Enable DDC Support" - depends on FB_RIVA - select FB_DDC - help + bool "Enable DDC Support" + depends on FB_RIVA + select FB_DDC + help This enables I2C support for nVidia Chipsets. This is used only for getting EDID information from the attached display allowing for robust video mode handling and switching. @@ -991,37 +991,37 @@ config FB_I810 select FB_CFB_IMAGEBLIT select VGASTATE help - This driver supports the on-board graphics built in to the Intel 810 - and 815 chipsets. Say Y if you have and plan to use such a board. + This driver supports the on-board graphics built in to the Intel 810 + and 815 chipsets. Say Y if you have and plan to use such a board. - To compile this driver as a module, choose M here: the + To compile this driver as a module, choose M here: the module will be called i810fb. - For more information, please read + For more information, please read config FB_I810_GTF bool "use VESA Generalized Timing Formula" depends on FB_I810 help - If you say Y, then the VESA standard, Generalized Timing Formula - or GTF, will be used to calculate the required video timing values - per video mode. Since the GTF allows nondiscrete timings - (nondiscrete being a range of values as opposed to discrete being a - set of values), you'll be able to use any combination of horizontal + If you say Y, then the VESA standard, Generalized Timing Formula + or GTF, will be used to calculate the required video timing values + per video mode. Since the GTF allows nondiscrete timings + (nondiscrete being a range of values as opposed to discrete being a + set of values), you'll be able to use any combination of horizontal and vertical resolutions, and vertical refresh rates without having to specify your own timing parameters. This is especially useful - to maximize the performance of an aging display, or if you just - have a display with nonstandard dimensions. A VESA compliant + to maximize the performance of an aging display, or if you just + have a display with nonstandard dimensions. A VESA compliant monitor is recommended, but can still work with non-compliant ones. - If you need or want this, then select this option. The timings may - not be compliant with Intel's recommended values. Use at your own + If you need or want this, then select this option. The timings may + not be compliant with Intel's recommended values. Use at your own risk. - If you say N, the driver will revert to discrete video timings + If you say N, the driver will revert to discrete video timings using a set recommended by Intel in their documentation. - - If unsure, say N. + + If unsure, say N. config FB_I810_I2C bool "Enable DDC Support" @@ -1060,8 +1060,8 @@ config FB_INTEL depends on !DRM_I915 help This driver supports the on-board graphics built in to the Intel - 830M/845G/852GM/855GM/865G/915G/915GM/945G/945GM/965G/965GM chipsets. - Say Y if you have and plan to use such a board. + 830M/845G/852GM/855GM/865G/915G/915GM/945G/945GM/965G/965GM chipsets. + Say Y if you have and plan to use such a board. To make FB_INTEL=Y work you need to say AGP_INTEL=y too. @@ -1142,10 +1142,10 @@ config FB_MATROX_G G450/G550 secondary head and digital output are supported without additional modules. - The driver starts in monitor mode. You must use the matroxset tool - (available at ) to - swap primary and secondary head outputs, or to change output mode. - Secondary head driver always start in 640x480 resolution and you + The driver starts in monitor mode. You must use the matroxset tool + (available at ) to + swap primary and secondary head outputs, or to change output mode. + Secondary head driver always start in 640x480 resolution and you must use fbset to change it. Do not forget that second head supports only 16 and 32 bpp @@ -1228,7 +1228,7 @@ config FB_RADEON_I2C select FB_DDC default y help - Say Y here if you want DDC/I2C support for your Radeon board. + Say Y here if you want DDC/I2C support for your Radeon board. config FB_RADEON_BACKLIGHT bool "Support for backlight control" @@ -1357,10 +1357,10 @@ config FB_SAVAGE will be called savagefb. config FB_SAVAGE_I2C - bool "Enable DDC2 Support" - depends on FB_SAVAGE - select FB_DDC - help + bool "Enable DDC2 Support" + depends on FB_SAVAGE + select FB_DDC + help This enables I2C support for S3 Savage Chipsets. This is used only for getting EDID information from the attached display allowing for robust video mode handling and switching. @@ -1370,12 +1370,12 @@ config FB_SAVAGE_I2C here. config FB_SAVAGE_ACCEL - bool "Enable Console Acceleration" - depends on FB_SAVAGE - help - This option will compile in console acceleration support. If - the resulting framebuffer console has bothersome glitches, then - choose N here. + bool "Enable Console Acceleration" + depends on FB_SAVAGE + help + This option will compile in console acceleration support. If + the resulting framebuffer console has bothersome glitches, then + choose N here. config FB_SIS tristate "SiS/XGI display support" @@ -1408,17 +1408,17 @@ config FB_SIS_315 as XGI V3XT, V5, V8 and Z7. config FB_VIA - tristate "VIA UniChrome (Pro) and Chrome9 display support" - depends on FB && PCI && GPIOLIB && I2C && (X86 || COMPILE_TEST) - select FB_CFB_FILLRECT - select FB_CFB_COPYAREA - select FB_CFB_IMAGEBLIT - select I2C_ALGOBIT - help + tristate "VIA UniChrome (Pro) and Chrome9 display support" + depends on FB && PCI && GPIOLIB && I2C && (X86 || COMPILE_TEST) + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT + select I2C_ALGOBIT + help This is the frame buffer device driver for Graphics chips of VIA UniChrome (Pro) Family (CLE266,PM800/CN400,P4M800CE/P4M800Pro/ CN700/VN800,CX700/VX700,P4M890) and Chrome9 Family (K8M890,CN896 - /P4M900,VX800) + /P4M900,VX800) Say Y if you have a VIA UniChrome graphics board. To compile this driver as a module, choose M here: the @@ -1455,7 +1455,7 @@ config FB_NEOMAGIC select VGASTATE help This driver supports notebooks with NeoMagic PCI chips. - Say Y if you have such a graphics card. + Say Y if you have such a graphics card. To compile this driver as a module, choose M here: the module will be called neofb. @@ -1510,7 +1510,7 @@ config FB_VOODOO1 select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT ---help--- - Say Y here if you have a 3Dfx Voodoo Graphics (Voodoo1/sst1) or + Say Y here if you have a 3Dfx Voodoo Graphics (Voodoo1/sst1) or Voodoo2 (cvg) based graphics card. To compile this driver as a module, choose M here: the @@ -1679,9 +1679,9 @@ config FB_HIT config FB_PMAG_AA tristate "PMAG-AA TURBOchannel framebuffer support" depends on FB && TC - select FB_CFB_FILLRECT - select FB_CFB_COPYAREA - select FB_CFB_IMAGEBLIT + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT help Support for the PMAG-AA TURBOchannel framebuffer card (1280x1024x1) used mainly in the MIPS-based DECstation series. @@ -1689,9 +1689,9 @@ config FB_PMAG_AA config FB_PMAG_BA tristate "PMAG-BA TURBOchannel framebuffer support" depends on FB && TC - select FB_CFB_FILLRECT - select FB_CFB_COPYAREA - select FB_CFB_IMAGEBLIT + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT help Support for the PMAG-BA TURBOchannel framebuffer card (1024x864x8) used mainly in the MIPS-based DECstation series. @@ -1699,9 +1699,9 @@ config FB_PMAG_BA config FB_PMAGB_B tristate "PMAGB-B TURBOchannel framebuffer support" depends on FB && TC - select FB_CFB_FILLRECT - select FB_CFB_COPYAREA - select FB_CFB_IMAGEBLIT + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT help Support for the PMAGB-B TURBOchannel framebuffer card used mainly in the MIPS-based DECstation series. The card is currently only @@ -1710,9 +1710,9 @@ config FB_PMAGB_B config FB_MAXINE bool "Maxine (Personal DECstation) onboard framebuffer support" depends on (FB = y) && MACH_DECSTATION - select FB_CFB_FILLRECT - select FB_CFB_COPYAREA - select FB_CFB_IMAGEBLIT + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT help Support for the onboard framebuffer (1024x768x8) in the Personal DECstation series (Personal DECstation 5000/20, /25, /33, /50, @@ -1721,9 +1721,9 @@ config FB_MAXINE config FB_G364 bool "G364 frame buffer support" depends on (FB = y) && (MIPS_MAGNUM_4000 || OLIVETTI_M700) - select FB_CFB_FILLRECT - select FB_CFB_COPYAREA - select FB_CFB_IMAGEBLIT + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT help The G364 driver is the framebuffer used in MIPS Magnum 4000 and Olivetti M700-10 systems. @@ -1731,9 +1731,9 @@ config FB_G364 config FB_68328 bool "Motorola 68328 native frame buffer support" depends on (FB = y) && (M68328 || M68EZ328 || M68VZ328) - select FB_CFB_FILLRECT - select FB_CFB_COPYAREA - select FB_CFB_IMAGEBLIT + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT help Say Y here if you want to support the built-in frame buffer of the Motorola 68328 CPU family. @@ -1812,13 +1812,13 @@ config FB_MBX Accelerator config FB_MBX_DEBUG - bool "Enable debugging info via debugfs" - depends on FB_MBX && DEBUG_FS - ---help--- - Enable this if you want debugging information using the debug - filesystem (debugfs) + bool "Enable debugging info via debugfs" + depends on FB_MBX && DEBUG_FS + ---help--- + Enable this if you want debugging information using the debug + filesystem (debugfs) - If unsure, say N. + If unsure, say N. config FB_FSL_DIU tristate "Freescale DIU framebuffer support" @@ -1834,9 +1834,9 @@ config FB_FSL_DIU config FB_W100 tristate "W100 frame buffer support" depends on FB && ARCH_PXA - select FB_CFB_FILLRECT - select FB_CFB_COPYAREA - select FB_CFB_IMAGEBLIT + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT ---help--- Frame buffer driver for the w100 as found on the Sharp SL-Cxx series. It can also drive the w3220 chip found on iPAQ hx4700. @@ -1901,10 +1901,10 @@ config FB_S3C Currently the support is only for the S3C6400 and S3C6410 SoCs. config FB_S3C_DEBUG_REGWRITE - bool "Debug register writes" - depends on FB_S3C - ---help--- - Show all register writes via pr_debug() + bool "Debug register writes" + depends on FB_S3C + ---help--- + Show all register writes via pr_debug() config FB_S3C2410 tristate "S3C2410 LCD framebuffer support" @@ -1930,18 +1930,18 @@ config FB_S3C2410_DEBUG through sysfs config FB_NUC900 - tristate "NUC900 LCD framebuffer support" - depends on FB && ARCH_W90X900 - select FB_CFB_FILLRECT - select FB_CFB_COPYAREA - select FB_CFB_IMAGEBLIT - ---help--- - Frame buffer driver for the built-in LCD controller in the Nuvoton - NUC900 processor + tristate "NUC900 LCD framebuffer support" + depends on FB && ARCH_W90X900 + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT + ---help--- + Frame buffer driver for the built-in LCD controller in the Nuvoton + NUC900 processor config GPM1040A0_320X240 - bool "Giantplus Technology GPM1040A0 320x240 Color TFT LCD" - depends on FB_NUC900 + bool "Giantplus Technology GPM1040A0 320x240 Color TFT LCD" + depends on FB_NUC900 config FB_SM501 tristate "Silicon Motion SM501 framebuffer support" diff --git a/drivers/video/fbdev/mmp/Kconfig b/drivers/video/fbdev/mmp/Kconfig index f56a7e2e8136..1b5e80c8a984 100644 --- a/drivers/video/fbdev/mmp/Kconfig +++ b/drivers/video/fbdev/mmp/Kconfig @@ -1,7 +1,7 @@ menuconfig MMP_DISP - tristate "Marvell MMP Display Subsystem support" - depends on CPU_PXA910 || CPU_MMP2 - help + tristate "Marvell MMP Display Subsystem support" + depends on CPU_PXA910 || CPU_MMP2 + help Marvell Display Subsystem support. if MMP_DISP diff --git a/drivers/video/fbdev/omap/Kconfig b/drivers/video/fbdev/omap/Kconfig index 29d250da8a3e..ca147936bb5c 100644 --- a/drivers/video/fbdev/omap/Kconfig +++ b/drivers/video/fbdev/omap/Kconfig @@ -6,7 +6,7 @@ config FB_OMAP select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT help - Frame buffer driver for OMAP based boards. + Frame buffer driver for OMAP based boards. config FB_OMAP_LCDC_EXTERNAL bool "External LCD controller support" @@ -49,13 +49,11 @@ config FB_OMAP_LCD_H3 H3 board. config FB_OMAP_DMA_TUNE - bool "Set DMA SDRAM access priority high" - depends on FB_OMAP - help - On systems in which video memory is in system memory - (SDRAM) this will speed up graphics DMA operations. - If you have such a system and want to use rotation - answer yes. Answer no if you have a dedicated video - memory, or don't use any of the accelerated features. - - + bool "Set DMA SDRAM access priority high" + depends on FB_OMAP + help + On systems in which video memory is in system memory + (SDRAM) this will speed up graphics DMA operations. + If you have such a system and want to use rotation + answer yes. Answer no if you have a dedicated video + memory, or don't use any of the accelerated features. diff --git a/drivers/video/fbdev/omap2/omapfb/Kconfig b/drivers/video/fbdev/omap2/omapfb/Kconfig index 3bf154e676d1..0410e07bb29e 100644 --- a/drivers/video/fbdev/omap2/omapfb/Kconfig +++ b/drivers/video/fbdev/omap2/omapfb/Kconfig @@ -2,23 +2,23 @@ config OMAP2_VRFB bool menuconfig FB_OMAP2 - tristate "OMAP2+ frame buffer support" - depends on FB - depends on DRM_OMAP = n + tristate "OMAP2+ frame buffer support" + depends on FB + depends on DRM_OMAP = n depends on GPIOLIB - select FB_OMAP2_DSS + select FB_OMAP2_DSS select OMAP2_VRFB if ARCH_OMAP2 || ARCH_OMAP3 - select FB_CFB_FILLRECT - select FB_CFB_COPYAREA - select FB_CFB_IMAGEBLIT - help + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT + help Frame buffer driver for OMAP2+ based boards. if FB_OMAP2 config FB_OMAP2_DEBUG_SUPPORT - bool "Debug support for OMAP2+ FB" + bool "Debug support for OMAP2+ FB" default y depends on FB_OMAP2 help diff --git a/drivers/video/fbdev/omap2/omapfb/displays/Kconfig b/drivers/video/fbdev/omap2/omapfb/displays/Kconfig index 08f12039dd02..3df8736cf8d8 100644 --- a/drivers/video/fbdev/omap2/omapfb/displays/Kconfig +++ b/drivers/video/fbdev/omap2/omapfb/displays/Kconfig @@ -1,5 +1,5 @@ menu "OMAPFB Panel and Encoder Drivers" - depends on FB_OMAP2_DSS + depends on FB_OMAP2_DSS config FB_OMAP2_ENCODER_OPA362 tristate "OPA362 external analog amplifier" @@ -8,29 +8,29 @@ config FB_OMAP2_ENCODER_OPA362 through a GPIO. config FB_OMAP2_ENCODER_TFP410 - tristate "TFP410 DPI to DVI Encoder" + tristate "TFP410 DPI to DVI Encoder" help Driver for TFP410 DPI to DVI encoder. config FB_OMAP2_ENCODER_TPD12S015 - tristate "TPD12S015 HDMI ESD protection and level shifter" + tristate "TPD12S015 HDMI ESD protection and level shifter" help Driver for TPD12S015, which offers HDMI ESD protection and level shifting. config FB_OMAP2_CONNECTOR_DVI - tristate "DVI Connector" + tristate "DVI Connector" depends on I2C help Driver for a generic DVI connector. config FB_OMAP2_CONNECTOR_HDMI - tristate "HDMI Connector" + tristate "HDMI Connector" help Driver for a generic HDMI connector. config FB_OMAP2_CONNECTOR_ANALOG_TV - tristate "Analog TV Connector" + tristate "Analog TV Connector" help Driver for a generic analog TV connector. @@ -58,29 +58,29 @@ config FB_OMAP2_PANEL_LGPHILIPS_LB035Q02 LCD Panel used on the Gumstix Overo Palo35 config FB_OMAP2_PANEL_SHARP_LS037V7DW01 - tristate "Sharp LS037V7DW01 LCD Panel" - depends on BACKLIGHT_CLASS_DEVICE - help - LCD Panel used in TI's SDP3430 and EVM boards + tristate "Sharp LS037V7DW01 LCD Panel" + depends on BACKLIGHT_CLASS_DEVICE + help + LCD Panel used in TI's SDP3430 and EVM boards config FB_OMAP2_PANEL_TPO_TD028TTEC1 - tristate "TPO TD028TTEC1 LCD Panel" - depends on SPI - help - LCD panel used in Openmoko. + tristate "TPO TD028TTEC1 LCD Panel" + depends on SPI + help + LCD panel used in Openmoko. config FB_OMAP2_PANEL_TPO_TD043MTEA1 - tristate "TPO TD043MTEA1 LCD Panel" - depends on SPI - help - LCD Panel used in OMAP3 Pandora + tristate "TPO TD043MTEA1 LCD Panel" + depends on SPI + help + LCD Panel used in OMAP3 Pandora config FB_OMAP2_PANEL_NEC_NL8048HL11 tristate "NEC NL8048HL11 Panel" depends on SPI depends on BACKLIGHT_CLASS_DEVICE help - This NEC NL8048HL11 panel is TFT LCD used in the - Zoom2/3/3630 sdp boards. + This NEC NL8048HL11 panel is TFT LCD used in the + Zoom2/3/3630 sdp boards. endmenu diff --git a/drivers/video/fbdev/omap2/omapfb/dss/Kconfig b/drivers/video/fbdev/omap2/omapfb/dss/Kconfig index 356b89b378d4..a34820e8ab97 100644 --- a/drivers/video/fbdev/omap2/omapfb/dss/Kconfig +++ b/drivers/video/fbdev/omap2/omapfb/dss/Kconfig @@ -3,7 +3,7 @@ config FB_OMAP2_DSS_INIT bool config FB_OMAP2_DSS - tristate + tristate select VIDEOMODE_HELPERS select FB_OMAP2_DSS_INIT select HDMI @@ -53,7 +53,7 @@ config FB_OMAP2_DSS_RFBI config FB_OMAP2_DSS_VENC bool "VENC support" - default y + default y help OMAP Video Encoder support for S-Video and composite TV-out. @@ -62,7 +62,7 @@ config FB_OMAP2_DSS_HDMI_COMMON config FB_OMAP4_DSS_HDMI bool "HDMI support for OMAP4" - default y + default y select FB_OMAP2_DSS_HDMI_COMMON help HDMI support for OMAP4 based SoCs. -- cgit v1.2.3-59-g8ed1b