From 01cfef57efe9c8ef445d4a5ad3bf26770fd5942a Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Thu, 20 Feb 2014 15:43:03 +0100 Subject: spi: sh-msiof: Add more register documentation Signed-off-by: Geert Uytterhoeven Signed-off-by: Mark Brown --- drivers/spi/spi-sh-msiof.c | 152 +++++++++++++++++++++++++++++---------------- 1 file changed, 100 insertions(+), 52 deletions(-) (limited to 'drivers') diff --git a/drivers/spi/spi-sh-msiof.c b/drivers/spi/spi-sh-msiof.c index d0af05e96a2d..7acbc4052757 100644 --- a/drivers/spi/spi-sh-msiof.c +++ b/drivers/spi/spi-sh-msiof.c @@ -42,32 +42,80 @@ struct sh_msiof_spi_priv { int rx_fifo_size; }; -#define TMDR1 0x00 -#define TMDR2 0x04 -#define TMDR3 0x08 -#define RMDR1 0x10 -#define RMDR2 0x14 -#define RMDR3 0x18 -#define TSCR 0x20 -#define RSCR 0x22 -#define CTR 0x28 -#define FCTR 0x30 -#define STR 0x40 -#define IER 0x44 -#define TDR1 0x48 -#define TDR2 0x4c -#define TFDR 0x50 -#define RDR1 0x58 -#define RDR2 0x5c -#define RFDR 0x60 - -#define CTR_TSCKE (1 << 15) -#define CTR_TFSE (1 << 14) -#define CTR_TXE (1 << 9) -#define CTR_RXE (1 << 8) - -#define STR_TEOF (1 << 23) -#define STR_REOF (1 << 7) +#define TMDR1 0x00 /* Transmit Mode Register 1 */ +#define TMDR2 0x04 /* Transmit Mode Register 2 */ +#define TMDR3 0x08 /* Transmit Mode Register 3 */ +#define RMDR1 0x10 /* Receive Mode Register 1 */ +#define RMDR2 0x14 /* Receive Mode Register 2 */ +#define RMDR3 0x18 /* Receive Mode Register 3 */ +#define TSCR 0x20 /* Transmit Clock Select Register */ +#define RSCR 0x22 /* Receive Clock Select Register (SH, A1, APE6) */ +#define CTR 0x28 /* Control Register */ +#define FCTR 0x30 /* FIFO Control Register */ +#define STR 0x40 /* Status Register */ +#define IER 0x44 /* Interrupt Enable Register */ +#define TDR1 0x48 /* Transmit Control Data Register 1 (SH, A1) */ +#define TDR2 0x4c /* Transmit Control Data Register 2 (SH, A1) */ +#define TFDR 0x50 /* Transmit FIFO Data Register */ +#define RDR1 0x58 /* Receive Control Data Register 1 (SH, A1) */ +#define RDR2 0x5c /* Receive Control Data Register 2 (SH, A1) */ +#define RFDR 0x60 /* Receive FIFO Data Register */ + +/* TMDR1 and RMDR1 */ +#define MDR1_TRMD 0x80000000 /* Transfer Mode (1 = Master mode) */ +#define MDR1_SYNCMD_MASK 0x30000000 /* SYNC Mode */ +#define MDR1_SYNCMD_SPI 0x20000000 /* Level mode/SPI */ +#define MDR1_SYNCMD_LR 0x30000000 /* L/R mode */ +#define MDR1_SYNCAC_SHIFT 25 /* Sync Polarity (1 = Active-low) */ +#define MDR1_BITLSB_SHIFT 24 /* MSB/LSB First (1 = LSB first) */ +#define MDR1_FLD_MASK 0x000000c0 /* Frame Sync Signal Interval (0-3) */ +#define MDR1_FLD_SHIFT 2 +#define MDR1_XXSTP 0x00000001 /* Transmission/Reception Stop on FIFO */ +/* TMDR1 */ +#define TMDR1_PCON 0x40000000 /* Transfer Signal Connection */ + +/* TMDR2 and RMDR2 */ +#define MDR2_BITLEN1(i) (((i) - 1) << 24) /* Data Size (8-32 bits) */ +#define MDR2_WDLEN1(i) (((i) - 1) << 16) /* Word Count (1-64/256 (SH, A1))) */ +#define MDR2_GRPMASK1 0x00000001 /* Group Output Mask 1 (SH, A1) */ + +/* TSCR and RSCR */ +#define SCR_BRPS_MASK 0x1f00 /* Prescaler Setting (1-32) */ +#define SCR_BRPS(i) (((i) - 1) << 8) +#define SCR_BRDV_MASK 0x0007 /* Baud Rate Generator's Division Ratio */ +#define SCR_BRDV_DIV_2 0x0000 +#define SCR_BRDV_DIV_4 0x0001 +#define SCR_BRDV_DIV_8 0x0002 +#define SCR_BRDV_DIV_16 0x0003 +#define SCR_BRDV_DIV_32 0x0004 +#define SCR_BRDV_DIV_1 0x0007 + +/* CTR */ +#define CTR_TSCKIZ_MASK 0xc0000000 /* Transmit Clock I/O Polarity Select */ +#define CTR_TSCKIZ_SCK 0x80000000 /* Disable SCK when TX disabled */ +#define CTR_TSCKIZ_POL_SHIFT 30 /* Transmit Clock Polarity */ +#define CTR_RSCKIZ_MASK 0x30000000 /* Receive Clock Polarity Select */ +#define CTR_RSCKIZ_SCK 0x20000000 /* Must match CTR_TSCKIZ_SCK */ +#define CTR_RSCKIZ_POL_SHIFT 28 /* Receive Clock Polarity */ +#define CTR_TEDG_SHIFT 27 /* Transmit Timing (1 = falling edge) */ +#define CTR_REDG_SHIFT 26 /* Receive Timing (1 = falling edge) */ +#define CTR_TXDIZ_MASK 0x00c00000 /* Pin Output When TX is Disabled */ +#define CTR_TXDIZ_LOW 0x00000000 /* 0 */ +#define CTR_TXDIZ_HIGH 0x00400000 /* 1 */ +#define CTR_TXDIZ_HIZ 0x00800000 /* High-impedance */ +#define CTR_TSCKE 0x00008000 /* Transmit Serial Clock Output Enable */ +#define CTR_TFSE 0x00004000 /* Transmit Frame Sync Signal Output Enable */ +#define CTR_TXE 0x00000200 /* Transmit Enable */ +#define CTR_RXE 0x00000100 /* Receive Enable */ + +/* STR and IER */ +#define STR_TEOF 0x00800000 /* Frame Transmission End */ +#define STR_REOF 0x00000080 /* Frame Reception End */ + + +#define DEFAULT_TX_FIFO_SIZE 64 +#define DEFAULT_RX_FIFO_SIZE 64 + static u32 sh_msiof_read(struct sh_msiof_spi_priv *p, int reg_offs) { @@ -131,17 +179,17 @@ static struct { unsigned short div; unsigned short scr; } const sh_msiof_spi_clk_table[] = { - { 1, 0x0007 }, - { 2, 0x0000 }, - { 4, 0x0001 }, - { 8, 0x0002 }, - { 16, 0x0003 }, - { 32, 0x0004 }, - { 64, 0x1f00 }, - { 128, 0x1f01 }, - { 256, 0x1f02 }, - { 512, 0x1f03 }, - { 1024, 0x1f04 }, + { 1, SCR_BRPS( 1) | SCR_BRDV_DIV_1 }, + { 2, SCR_BRPS( 1) | SCR_BRDV_DIV_2 }, + { 4, SCR_BRPS( 1) | SCR_BRDV_DIV_4 }, + { 8, SCR_BRPS( 1) | SCR_BRDV_DIV_8 }, + { 16, SCR_BRPS( 1) | SCR_BRDV_DIV_16 }, + { 32, SCR_BRPS( 1) | SCR_BRDV_DIV_32 }, + { 64, SCR_BRPS(32) | SCR_BRDV_DIV_2 }, + { 128, SCR_BRPS(32) | SCR_BRDV_DIV_4 }, + { 256, SCR_BRPS(32) | SCR_BRDV_DIV_8 }, + { 512, SCR_BRPS(32) | SCR_BRDV_DIV_16 }, + { 1024, SCR_BRPS(32) | SCR_BRDV_DIV_32 }, }; static void sh_msiof_spi_set_clk_regs(struct sh_msiof_spi_priv *p, @@ -182,21 +230,21 @@ static void sh_msiof_spi_set_pin_regs(struct sh_msiof_spi_priv *p, */ sh_msiof_write(p, FCTR, 0); - tmp = 0; - tmp |= !cs_high << 25; - tmp |= lsb_first << 24; - sh_msiof_write(p, TMDR1, 0xe0000005 | tmp); - sh_msiof_write(p, RMDR1, 0x20000005 | tmp); + tmp = MDR1_SYNCMD_SPI | 1 << MDR1_FLD_SHIFT | MDR1_XXSTP; + tmp |= !cs_high << MDR1_SYNCAC_SHIFT; + tmp |= lsb_first << MDR1_BITLSB_SHIFT; + sh_msiof_write(p, TMDR1, tmp | MDR1_TRMD | TMDR1_PCON); + sh_msiof_write(p, RMDR1, tmp); - tmp = 0xa0000000; - tmp |= cpol << 30; /* TSCKIZ */ - tmp |= cpol << 28; /* RSCKIZ */ + tmp = 0; + tmp |= CTR_TSCKIZ_SCK | cpol << CTR_TSCKIZ_POL_SHIFT; + tmp |= CTR_RSCKIZ_SCK | cpol << CTR_RSCKIZ_POL_SHIFT; edge = cpol ^ !cpha; - tmp |= edge << 27; /* TEDG */ - tmp |= edge << 26; /* REDG */ - tmp |= (tx_hi_z ? 2 : 0) << 22; /* TXDIZ */ + tmp |= edge << CTR_TEDG_SHIFT; + tmp |= edge << CTR_REDG_SHIFT; + tmp |= tx_hi_z ? CTR_TXDIZ_HIZ : CTR_TXDIZ_LOW; sh_msiof_write(p, CTR, tmp); } @@ -204,12 +252,12 @@ static void sh_msiof_spi_set_mode_regs(struct sh_msiof_spi_priv *p, const void *tx_buf, void *rx_buf, u32 bits, u32 words) { - u32 dr2 = ((bits - 1) << 24) | ((words - 1) << 16); + u32 dr2 = MDR2_BITLEN1(bits) | MDR2_WDLEN1(words); if (tx_buf) sh_msiof_write(p, TMDR2, dr2); else - sh_msiof_write(p, TMDR2, dr2 | 1); + sh_msiof_write(p, TMDR2, dr2 | MDR2_GRPMASK1); if (rx_buf) sh_msiof_write(p, RMDR2, dr2); @@ -695,8 +743,8 @@ static int sh_msiof_spi_probe(struct platform_device *pdev) pm_runtime_enable(&pdev->dev); /* The standard version of MSIOF use 64 word FIFOs */ - p->tx_fifo_size = 64; - p->rx_fifo_size = 64; + p->tx_fifo_size = DEFAULT_TX_FIFO_SIZE; + p->rx_fifo_size = DEFAULT_RX_FIFO_SIZE; /* Platform data may override FIFO sizes */ if (p->info->tx_fifo_override) -- cgit v1.2.3-59-g8ed1b