From 020003f763e24e4ed0bb3d8909f3940891536d5d Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Thu, 14 Nov 2019 08:25:28 -0800 Subject: bus: ti-sysc: Add module enable quirk for audio AESS We must set the autogating bit on enable for AESS (Audio Engine SubSystem) when probed with ti-sysc interconnect target module driver. Otherwise it won't idle properly. Cc: Peter Ujfalusi Tested-by: Peter Ujfalusi Signed-off-by: Tony Lindgren --- drivers/bus/ti-sysc.c | 14 +++++++++++++- 1 file changed, 13 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/bus/ti-sysc.c b/drivers/bus/ti-sysc.c index 97b85493aa43..99d7356e245b 100644 --- a/drivers/bus/ti-sysc.c +++ b/drivers/bus/ti-sysc.c @@ -1242,6 +1242,8 @@ static const struct sysc_revision_quirk sysc_revision_quirks[] = { SYSC_QUIRK_SWSUP_SIDLE), /* Quirks that need to be set based on detected module */ + SYSC_QUIRK("aess", 0, 0, 0x10, -1, 0x40000000, 0xffffffff, + SYSC_MODULE_QUIRK_AESS), SYSC_QUIRK("hdq1w", 0, 0, 0x14, 0x18, 0x00000006, 0xffffffff, SYSC_MODULE_QUIRK_HDQ1W), SYSC_QUIRK("hdq1w", 0, 0, 0x14, 0x18, 0x0000000a, 0xffffffff, @@ -1270,7 +1272,6 @@ static const struct sysc_revision_quirk sysc_revision_quirks[] = { #ifdef DEBUG SYSC_QUIRK("adc", 0, 0, 0x10, -1, 0x47300001, 0xffffffff, 0), SYSC_QUIRK("atl", 0, 0, -1, -1, 0x0a070100, 0xffffffff, 0), - SYSC_QUIRK("aess", 0, 0, 0x10, -1, 0x40000000, 0xffffffff, 0), SYSC_QUIRK("cm", 0, 0, -1, -1, 0x40000301, 0xffffffff, 0), SYSC_QUIRK("control", 0, 0, 0x10, -1, 0x40000900, 0xffffffff, 0), SYSC_QUIRK("cpgmac", 0, 0x1200, 0x1208, 0x1204, 0x4edb1902, @@ -1402,6 +1403,14 @@ static void sysc_clk_enable_quirk_hdq1w(struct sysc *ddata) sysc_write(ddata, offset, val); } +/* AESS (Audio Engine SubSystem) needs autogating set after enable */ +static void sysc_module_enable_quirk_aess(struct sysc *ddata) +{ + int offset = 0x7c; /* AESS_AUTO_GATING_ENABLE */ + + sysc_write(ddata, offset, 1); +} + /* I2C needs extra enable bit toggling for reset */ static void sysc_clk_quirk_i2c(struct sysc *ddata, bool enable) { @@ -1484,6 +1493,9 @@ static void sysc_init_module_quirks(struct sysc *ddata) return; } + if (ddata->cfg.quirks & SYSC_MODULE_QUIRK_AESS) + ddata->module_enable_quirk = sysc_module_enable_quirk_aess; + if (ddata->cfg.quirks & SYSC_MODULE_QUIRK_SGX) ddata->module_enable_quirk = sysc_module_enable_quirk_sgx; -- cgit v1.2.3-59-g8ed1b From cb6cfe2eaed171b5a2e575fa3f0cf0924b5bd1d2 Mon Sep 17 00:00:00 2001 From: Markus Elfring Date: Wed, 6 Nov 2019 19:12:30 +0100 Subject: bus: ti-sysc: Adjust exception handling in sysc_child_add_named_clock() MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Add a jump target so that a call of the function “clk_put” can be better reused at the end of this function. Signed-off-by: Markus Elfring Signed-off-by: Tony Lindgren --- drivers/bus/ti-sysc.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/bus/ti-sysc.c b/drivers/bus/ti-sysc.c index 99d7356e245b..56887c6877a7 100644 --- a/drivers/bus/ti-sysc.c +++ b/drivers/bus/ti-sysc.c @@ -1778,9 +1778,8 @@ static int sysc_child_add_named_clock(struct sysc *ddata, clk = clk_get(child, name); if (!IS_ERR(clk)) { - clk_put(clk); - - return -EEXIST; + error = -EEXIST; + goto put_clk; } clk = clk_get(ddata->dev, name); @@ -1790,7 +1789,7 @@ static int sysc_child_add_named_clock(struct sysc *ddata, l = clkdev_create(clk, name, dev_name(child)); if (!l) error = -ENOMEM; - +put_clk: clk_put(clk); return error; -- cgit v1.2.3-59-g8ed1b