From 172f6d3a031b5ecb22e7dd8c4462f4eeabde3d63 Mon Sep 17 00:00:00 2001 From: Marc Kleine-Budde Date: Thu, 4 Mar 2021 15:16:14 +0100 Subject: can: c_can: convert block comments to network style comments This patch converts all block comments to network subsystem style block comments. Link: https://lore.kernel.org/r/20210304154240.2747987-2-mkl@pengutronix.de Signed-off-by: Marc Kleine-Budde --- drivers/net/can/c_can/c_can.c | 52 +++++++++++++-------------------------- drivers/net/can/c_can/c_can_pci.c | 3 +-- 2 files changed, 18 insertions(+), 37 deletions(-) (limited to 'drivers') diff --git a/drivers/net/can/c_can/c_can.c b/drivers/net/can/c_can/c_can.c index 6958830cb983..6629951e4935 100644 --- a/drivers/net/can/c_can/c_can.c +++ b/drivers/net/can/c_can/c_can.c @@ -161,9 +161,7 @@ #define IF_MCONT_TX (IF_MCONT_TXIE | IF_MCONT_EOB) -/* - * Use IF1 for RX and IF2 for TX - */ +/* Use IF1 for RX and IF2 for TX */ #define IF_RX 0 #define IF_TX 1 @@ -189,8 +187,7 @@ enum c_can_lec_type { LEC_MASK = LEC_UNUSED, }; -/* - * c_can error types: +/* c_can error types: * Bus errors (BUS_OFF, ERROR_WARNING, ERROR_PASSIVE) are supported */ enum c_can_bus_error_types { @@ -268,8 +265,7 @@ static inline void c_can_object_put(struct net_device *dev, int iface, c_can_obj_update(dev, iface, cmd | IF_COMM_WR, obj); } -/* - * Note: According to documentation clearing TXIE while MSGVAL is set +/* Note: According to documentation clearing TXIE while MSGVAL is set * is not allowed, but works nicely on C/DCAN. And that lowers the I/O * load significantly. */ @@ -309,8 +305,7 @@ static void c_can_setup_tx_object(struct net_device *dev, int iface, if (!rtr) arb |= IF_ARB_TRANSMIT; - /* - * If we change the DIR bit, we need to invalidate the buffer + /* If we change the DIR bit, we need to invalidate the buffer * first, i.e. clear the MSGVAL flag in the arbiter. */ if (rtr != (bool)test_bit(idx, &priv->tx_dir)) { @@ -447,8 +442,7 @@ static netdev_tx_t c_can_start_xmit(struct sk_buff *skb, if (can_dropped_invalid_skb(dev, skb)) return NETDEV_TX_OK; - /* - * This is not a FIFO. C/D_CAN sends out the buffers + /* This is not a FIFO. C/D_CAN sends out the buffers * prioritized. The lowest buffer number wins. */ idx = fls(atomic_read(&priv->tx_active)); @@ -457,8 +451,7 @@ static netdev_tx_t c_can_start_xmit(struct sk_buff *skb, /* If this is the last buffer, stop the xmit queue */ if (idx == C_CAN_MSG_OBJ_TX_NUM - 1) netif_stop_queue(dev); - /* - * Store the message in the interface so we can call + /* Store the message in the interface so we can call * can_put_echo_skb(). We must do this before we enable * transmit as we might race against do_tx(). */ @@ -527,8 +520,7 @@ static int c_can_set_bittiming(struct net_device *dev) return c_can_wait_for_ctrl_init(dev, priv, 0); } -/* - * Configure C_CAN message objects for Tx and Rx purposes: +/* Configure C_CAN message objects for Tx and Rx purposes: * C_CAN provides a total of 32 message objects that can be configured * either for Tx or Rx purposes. Here the first 16 message objects are used as * a reception FIFO. The end of reception FIFO is signified by the EoB bit @@ -572,8 +564,7 @@ static int c_can_software_reset(struct net_device *dev) return 0; } -/* - * Configure C_CAN chip: +/* Configure C_CAN chip: * - enable/disable auto-retransmission * - set operating mode * - configure message objects @@ -739,8 +730,7 @@ static void c_can_do_tx(struct net_device *dev) } } -/* - * If we have a gap in the pending bits, that means we either +/* If we have a gap in the pending bits, that means we either * raced with the hardware or failed to readout all upper * objects in the last run due to quota limit. */ @@ -751,8 +741,7 @@ static u32 c_can_adjust_pending(u32 pend) if (pend == RECEIVE_OBJECT_BITS) return pend; - /* - * If the last set bit is larger than the number of pending + /* If the last set bit is larger than the number of pending * bits we have a gap. */ weight = hweight32(pend); @@ -762,8 +751,7 @@ static u32 c_can_adjust_pending(u32 pend) if (lasts == weight) return pend; - /* - * Find the first set bit after the gap. We walk backwards + /* Find the first set bit after the gap. We walk backwards * from the last set bit. */ for (lasts--; pend & (1 << (lasts - 1)); lasts--); @@ -803,8 +791,7 @@ static int c_can_read_objects(struct net_device *dev, struct c_can_priv *priv, continue; } - /* - * This really should not happen, but this covers some + /* This really should not happen, but this covers some * odd HW behaviour. Do not remove that unless you * want to brick your machine. */ @@ -830,8 +817,7 @@ static inline u32 c_can_get_pending(struct c_can_priv *priv) return pend; } -/* - * theory of operation: +/* theory of operation: * * c_can core saves a received CAN message into the first free message * object it finds free (starting with the lowest). Bits NEWDAT and @@ -848,8 +834,7 @@ static int c_can_do_rx_poll(struct net_device *dev, int quota) struct c_can_priv *priv = netdev_priv(dev); u32 pkts = 0, pend = 0, toread, n; - /* - * It is faster to read only one 16bit register. This is only possible + /* It is faster to read only one 16bit register. This is only possible * for a maximum number of 16 objects. */ BUILD_BUG_ON_MSG(C_CAN_MSG_OBJ_RX_LAST > 16, @@ -860,8 +845,7 @@ static int c_can_do_rx_poll(struct net_device *dev, int quota) pend = c_can_get_pending(priv); if (!pend) break; - /* - * If the pending field has a gap, handle the + /* If the pending field has a gap, handle the * bits above the gap first. */ toread = c_can_adjust_pending(pend); @@ -979,8 +963,7 @@ static int c_can_handle_bus_err(struct net_device *dev, struct can_frame *cf; struct sk_buff *skb; - /* - * early exit if no lec update or no error. + /* early exit if no lec update or no error. * no lec update means that no CAN bus event has been detected * since CPU wrote 0x7 value to status reg. */ @@ -999,8 +982,7 @@ static int c_can_handle_bus_err(struct net_device *dev, if (unlikely(!skb)) return 0; - /* - * check for 'last error code' which tells us the + /* check for 'last error code' which tells us the * type of the last error to occur on the CAN bus */ cf->can_id |= CAN_ERR_PROT | CAN_ERR_BUSERROR; diff --git a/drivers/net/can/c_can/c_can_pci.c b/drivers/net/can/c_can/c_can_pci.c index 7efb60b50876..9d7a4a335249 100644 --- a/drivers/net/can/c_can/c_can_pci.c +++ b/drivers/net/can/c_can/c_can_pci.c @@ -41,8 +41,7 @@ struct c_can_pci_data { void (*init)(const struct c_can_priv *priv, bool enable); }; -/* - * 16-bit c_can registers can be arranged differently in the memory +/* 16-bit c_can registers can be arranged differently in the memory * architecture of different implementations. For example: 16-bit * registers can be aligned to a 16-bit boundary or 32-bit boundary etc. * Handle the same by providing a common read/write interface. -- cgit v1.2.3-59-g8ed1b