From 1974e20161a2c097c481d2ff711de7db56cb2cd6 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Thu, 8 Nov 2007 11:20:18 +0900 Subject: libata: skip 0xff polling for PATA controllers In a presentation of true workmanship, pata_ali asserts IRQ permanantly if the TF status register is read more than once when there's no device attached to the port. Avoid waiting polling for !0xff if it's PATA. It's needed only for some rare SATA devices anyway. This problem is reported by Luca Tettamanti in bugzilla bug 9298. Signed-off-by: Tejun Heo Tested-By: Luca Tettamanti Signed-off-by: Jeff Garzik --- drivers/ata/libata-core.c | 16 +++++++++++----- 1 file changed, 11 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index 89fd0e9ed746..fd332612d64a 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -3373,14 +3373,20 @@ void ata_wait_after_reset(struct ata_port *ap, unsigned long deadline) * to clear 0xff after reset. For example, HHD424020F7SV00 * iVDR needs >= 800ms while. Quantum GoVault needs even more * than that. + * + * Note that some PATA controllers (pata_ali) explode if + * status register is read more than once when there's no + * device attached. */ - while (1) { - u8 status = ata_chk_status(ap); + if (ap->flags & ATA_FLAG_SATA) { + while (1) { + u8 status = ata_chk_status(ap); - if (status != 0xff || time_after(jiffies, deadline)) - return; + if (status != 0xff || time_after(jiffies, deadline)) + return; - msleep(50); + msleep(50); + } } } -- cgit v1.2.3-59-g8ed1b