From 471a739a47aa7d582f0cdf9d392957d04632bae2 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Wed, 26 Jun 2019 00:20:23 +0200 Subject: PCI: PM: Avoid skipping bus-level PM on platforms without ACPI There are platforms that do not call pm_set_suspend_via_firmware(), so pm_suspend_via_firmware() returns 'false' on them, but the power states of PCI devices (PCIe ports in particular) are changed as a result of powering down core platform components during system-wide suspend. Thus the pm_suspend_via_firmware() checks in pci_pm_suspend_noirq() and pci_pm_resume_noirq() introduced by commit 3e26c5feed2a ("PCI: PM: Skip devices in D0 for suspend-to- idle") are not sufficient to determine that devices left in D0 during suspend will remain in D0 during resume and so the bus-level power management can be skipped for them. For this reason, introduce a new global suspend flag, PM_SUSPEND_FLAG_NO_PLATFORM, set it for suspend-to-idle only and replace the pm_suspend_via_firmware() checks mentioned above with checks against this flag. Fixes: 3e26c5feed2a ("PCI: PM: Skip devices in D0 for suspend-to-idle") Reported-by: Jon Hunter Tested-by: Jon Hunter Signed-off-by: Rafael J. Wysocki Tested-by: Mika Westerberg Reviewed-by: Mika Westerberg --- drivers/pci/pci-driver.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/pci/pci-driver.c b/drivers/pci/pci-driver.c index 98af9ecd4a90..ca3793002e2f 100644 --- a/drivers/pci/pci-driver.c +++ b/drivers/pci/pci-driver.c @@ -859,7 +859,7 @@ static int pci_pm_suspend_noirq(struct device *dev) pci_dev->bus->self->skip_bus_pm = true; } - if (pci_dev->skip_bus_pm && !pm_suspend_via_firmware()) { + if (pci_dev->skip_bus_pm && pm_suspend_no_platform()) { dev_dbg(dev, "PCI PM: Skipped\n"); goto Fixup; } @@ -914,10 +914,10 @@ static int pci_pm_resume_noirq(struct device *dev) /* * In the suspend-to-idle case, devices left in D0 during suspend will * stay in D0, so it is not necessary to restore or update their - * configuration here and attempting to put them into D0 again may - * confuse some firmware, so avoid doing that. + * configuration here and attempting to put them into D0 again is + * pointless, so avoid doing that. */ - if (!pci_dev->skip_bus_pm || pm_suspend_via_firmware()) + if (!(pci_dev->skip_bus_pm && pm_suspend_no_platform())) pci_pm_default_resume_early(pci_dev); pci_fixup_device(pci_fixup_resume_early, pci_dev); -- cgit v1.2.3-59-g8ed1b