From 4cd7d9247ffa2a27508c69563b66713519c196f5 Mon Sep 17 00:00:00 2001
From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Date: Fri, 8 Jan 2010 00:11:01 -0800
Subject: scc_pata: fix module unloading

scc_pata host driver predated module unloading support for IDE host
drivers so even though it supports PCI hot-unplug and implements
PCI device ->remove method it doesn't allow module removal.  Fix it.

Add missing __init/__exit tags to module_init/module_exit functions
while at it (from Peter Huewe).

Noticed-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/ide/scc_pata.c | 12 +++++-------
 1 file changed, 5 insertions(+), 7 deletions(-)

(limited to 'drivers')

diff --git a/drivers/ide/scc_pata.c b/drivers/ide/scc_pata.c
index 1104bb301eb9..8066168992d7 100644
--- a/drivers/ide/scc_pata.c
+++ b/drivers/ide/scc_pata.c
@@ -872,20 +872,18 @@ static struct pci_driver scc_pci_driver = {
 	.remove = __devexit_p(scc_remove),
 };
 
-static int scc_ide_init(void)
+static int __init scc_ide_init(void)
 {
 	return ide_pci_register_driver(&scc_pci_driver);
 }
 
-module_init(scc_ide_init);
-/* -- No exit code?
-static void scc_ide_exit(void)
+static void __exit scc_ide_exit(void)
 {
-	ide_pci_unregister_driver(&scc_pci_driver);
+	pci_unregister_driver(&scc_pci_driver);
 }
-module_exit(scc_ide_exit);
- */
 
+module_init(scc_ide_init);
+module_exit(scc_ide_exit);
 
 MODULE_DESCRIPTION("PCI driver module for Toshiba SCC IDE");
 MODULE_LICENSE("GPL");
-- 
cgit v1.2.3-59-g8ed1b


From f75d4a238770d83d3a0475ce7f34e3fa37de161e Mon Sep 17 00:00:00 2001
From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Date: Tue, 5 Jan 2010 07:07:27 +0000
Subject: icside: bring back ->maskproc method

Bring back ->maskproc method since it is still needed for proper operation,
as noticed by Russell King:

> This change is bogus.
>
>         writeb(0, base + ICS_ARCIN_V6_INTROFFSET_1);
>         readb(base + ICS_ARCIN_V6_INTROFFSET_2);
>
>         writeb(0, base + ICS_ARCIN_V6_INTROFFSET_2);
>         readb(base + ICS_ARCIN_V6_INTROFFSET_1);
>
> This sequence of code does:
>
> 1. enable interrupt 1
> 2. disable interrupt 2
> 3. enable interrupt 2
> 4. disable interrupt 1
>
> which results in the interrupt for the second channel being enabled -
> leaving channel 1 blocked.
>
> Firstly, icside shares its two IDE channels with one DMA engine - so it's
> a simplex interface.  IDE supports those (or did when the code was written)
> serializing requests between the two interfaces.  libata does not.
>
> Secondly, the interrupt lines on icside float when there's no drive connected
> or when the drive has its NIEN bit set, which means that you get spurious
> screaming interrupts which can kill off all expansion card interrupts on
> the machine unless you disable the channel interrupt on the card.
>
> Since libata can not serialize the operation of the two channels like IDE
> can, the libata version of the icside driver does not contain the interrupt
> stearing logic.  Instead, it looks at the status after reset, and if
> nothing was found on that channel, it masks the interrupt from that
> channel.

This patch reverts changes done in commit dff8817 (I became confused due to
non-standard & undocumented ->maskproc method, anyway sorry about that).

Noticed-by: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/ide/icside.c | 64 ++++++++++++++++++++++++++++++++++++++++++++++++----
 1 file changed, 60 insertions(+), 4 deletions(-)

(limited to 'drivers')

diff --git a/drivers/ide/icside.c b/drivers/ide/icside.c
index 0f67f1abbbd3..d7e6f09aa86b 100644
--- a/drivers/ide/icside.c
+++ b/drivers/ide/icside.c
@@ -65,6 +65,8 @@ static struct cardinfo icside_cardinfo_v6_2 = {
 };
 
 struct icside_state {
+	unsigned int channel;
+	unsigned int enabled;
 	void __iomem *irq_port;
 	void __iomem *ioc_base;
 	unsigned int sel;
@@ -114,11 +116,18 @@ static void icside_irqenable_arcin_v6 (struct expansion_card *ec, int irqnr)
 	struct icside_state *state = ec->irq_data;
 	void __iomem *base = state->irq_port;
 
-	writeb(0, base + ICS_ARCIN_V6_INTROFFSET_1);
-	readb(base + ICS_ARCIN_V6_INTROFFSET_2);
+	state->enabled = 1;
 
-	writeb(0, base + ICS_ARCIN_V6_INTROFFSET_2);
-	readb(base + ICS_ARCIN_V6_INTROFFSET_1);
+	switch (state->channel) {
+	case 0:
+		writeb(0, base + ICS_ARCIN_V6_INTROFFSET_1);
+		readb(base + ICS_ARCIN_V6_INTROFFSET_2);
+		break;
+	case 1:
+		writeb(0, base + ICS_ARCIN_V6_INTROFFSET_2);
+		readb(base + ICS_ARCIN_V6_INTROFFSET_1);
+		break;
+	}
 }
 
 /* Prototype: icside_irqdisable_arcin_v6 (struct expansion_card *ec, int irqnr)
@@ -128,6 +137,8 @@ static void icside_irqdisable_arcin_v6 (struct expansion_card *ec, int irqnr)
 {
 	struct icside_state *state = ec->irq_data;
 
+	state->enabled = 0;
+
 	readb(state->irq_port + ICS_ARCIN_V6_INTROFFSET_1);
 	readb(state->irq_port + ICS_ARCIN_V6_INTROFFSET_2);
 }
@@ -149,6 +160,44 @@ static const expansioncard_ops_t icside_ops_arcin_v6 = {
 	.irqpending	= icside_irqpending_arcin_v6,
 };
 
+/*
+ * Handle routing of interrupts.  This is called before
+ * we write the command to the drive.
+ */
+static void icside_maskproc(ide_drive_t *drive, int mask)
+{
+	ide_hwif_t *hwif = drive->hwif;
+	struct expansion_card *ec = ECARD_DEV(hwif->dev);
+	struct icside_state *state = ecard_get_drvdata(ec);
+	unsigned long flags;
+
+	local_irq_save(flags);
+
+	state->channel = hwif->channel;
+
+	if (state->enabled && !mask) {
+		switch (hwif->channel) {
+		case 0:
+			writeb(0, state->irq_port + ICS_ARCIN_V6_INTROFFSET_1);
+			readb(state->irq_port + ICS_ARCIN_V6_INTROFFSET_2);
+			break;
+		case 1:
+			writeb(0, state->irq_port + ICS_ARCIN_V6_INTROFFSET_2);
+			readb(state->irq_port + ICS_ARCIN_V6_INTROFFSET_1);
+			break;
+		}
+	} else {
+		readb(state->irq_port + ICS_ARCIN_V6_INTROFFSET_2);
+		readb(state->irq_port + ICS_ARCIN_V6_INTROFFSET_1);
+	}
+
+	local_irq_restore(flags);
+}
+
+static const struct ide_port_ops icside_v6_no_dma_port_ops = {
+	.maskproc		= icside_maskproc,
+};
+
 #ifdef CONFIG_BLK_DEV_IDEDMA_ICS
 /*
  * SG-DMA support.
@@ -228,6 +277,7 @@ static void icside_set_dma_mode(ide_drive_t *drive, const u8 xfer_mode)
 
 static const struct ide_port_ops icside_v6_port_ops = {
 	.set_dma_mode		= icside_set_dma_mode,
+	.maskproc		= icside_maskproc,
 };
 
 static void icside_dma_host_set(ide_drive_t *drive, int on)
@@ -271,6 +321,11 @@ static int icside_dma_setup(ide_drive_t *drive, struct ide_cmd *cmd)
 	 */
 	BUG_ON(dma_channel_active(ec->dma));
 
+	/*
+	 * Ensure that we have the right interrupt routed.
+	 */
+	icside_maskproc(drive, 0);
+
 	/*
 	 * Route the DMA signals to the correct interface.
 	 */
@@ -399,6 +454,7 @@ err_free:
 
 static const struct ide_port_info icside_v6_port_info __initdata = {
 	.init_dma		= icside_dma_off_init,
+	.port_ops		= &icside_v6_no_dma_port_ops,
 	.dma_ops		= &icside_v6_dma_ops,
 	.host_flags		= IDE_HFLAG_SERIALIZE | IDE_HFLAG_MMIO,
 	.mwdma_mask		= ATA_MWDMA2,
-- 
cgit v1.2.3-59-g8ed1b


From c3be57b6f35ef96a980ce84e59d6a5a8ca6184ad Mon Sep 17 00:00:00 2001
From: Russell King <rmk@arm.linux.org.uk>
Date: Sun, 3 Jan 2010 12:35:42 +0000
Subject: ide: Fix Promise UDMA33 IDE driver (pdc202xx_old)

On Sun, Jan 03, 2010 at 12:23:14AM +0000, Russell King wrote:
> - with IDE
>   - locks the interrupt line, and makes the machine extremely painful -
>     about an hour to get to the point of being able to unload the
>     pdc202xx_old module.

Having manually bisected kernel versions, I've narrowed it down to some
change between 2.6.30 and 2.6.31.  There's not much which has changed
between the two kernels, but one change stands out like a sore thumb:

+static int pdc202xx_test_irq(ide_hwif_t *hwif)
+{
+       struct pci_dev *dev     = to_pci_dev(hwif->dev);
+       unsigned long high_16   = pci_resource_start(dev, 4);
+       u8 sc1d                 = inb(high_16 + 0x1d);
+
+       if (hwif->channel) {
+               /*
+                * bit 7: error, bit 6: interrupting,
+                * bit 5: FIFO full, bit 4: FIFO empty
+                */
+               return ((sc1d & 0x50) == 0x40) ? 1 : 0;
+       } else  {
+               /*
+                * bit 3: error, bit 2: interrupting,
+                * bit 1: FIFO full, bit 0: FIFO empty
+                */
+               return ((sc1d & 0x05) == 0x04) ? 1 : 0;
+       }
+}

Reading the (documented as a 32-bit) system control register when the
interface is idle gives: 0x01da110c

So, the byte at 0x1d is 0x11, which is documented as meaning that the
primary and secondary FIFOs are empty.

The code above, which is trying to see whether an IRQ is pending, checks
for the IRQ bit to be one, and the FIFO bit to be zero - or in English,
to be non-empty.

Since during a BM-DMA read, the FIFOs will naturally be drained to the
PCI bus, the chance of us getting to the interface before this happens
are extremely small - and if we don't, it means we decide not to service
the interrupt.  Hence, the screaming interrupt problem with drivers/ide.

Fix this by only indicating an interrupt is ready if both the interrupt
and FIFO empty bits are at '1'.

This bug only affects PDC20246/PDC20247 (Promise Ultra33) based cards,
and has been tested on 2.6.31 and 2.6.33-rc2.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Tested-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/ide/pdc202xx_old.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'drivers')

diff --git a/drivers/ide/pdc202xx_old.c b/drivers/ide/pdc202xx_old.c
index 35161dd840a0..e3bca38a03f2 100644
--- a/drivers/ide/pdc202xx_old.c
+++ b/drivers/ide/pdc202xx_old.c
@@ -100,13 +100,13 @@ static int pdc202xx_test_irq(ide_hwif_t *hwif)
 		 * bit 7: error, bit 6: interrupting,
 		 * bit 5: FIFO full, bit 4: FIFO empty
 		 */
-		return ((sc1d & 0x50) == 0x40) ? 1 : 0;
+		return ((sc1d & 0x50) == 0x50) ? 1 : 0;
 	} else	{
 		/*
 		 * bit 3: error, bit 2: interrupting,
 		 * bit 1: FIFO full, bit 0: FIFO empty
 		 */
-		return ((sc1d & 0x05) == 0x04) ? 1 : 0;
+		return ((sc1d & 0x05) == 0x05) ? 1 : 0;
 	}
 }
 
-- 
cgit v1.2.3-59-g8ed1b


From 05227adff206c7290e8bbf1c28be771c2cbfa0ee Mon Sep 17 00:00:00 2001
From: Alan Cox <alan@linux.intel.com>
Date: Mon, 4 Jan 2010 06:24:00 +0000
Subject: ide_tape: kill off use of the ->ioctl operation

Ready to get everything using unlocked_ioctl()

For ide_tape we just push down as this is legacy code anyway

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/ide/ide-tape.c | 14 ++++++++++++--
 1 file changed, 12 insertions(+), 2 deletions(-)

(limited to 'drivers')

diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c
index 6a0e62542167..b07232880ec9 100644
--- a/drivers/ide/ide-tape.c
+++ b/drivers/ide/ide-tape.c
@@ -1365,7 +1365,7 @@ static int idetape_mtioctop(ide_drive_t *drive, short mt_op, int mt_count)
  * supported here, and not in the corresponding block interface. Our own
  * ide-tape ioctls are supported on both interfaces.
  */
-static int idetape_chrdev_ioctl(struct inode *inode, struct file *file,
+static long do_idetape_chrdev_ioctl(struct file *file,
 				unsigned int cmd, unsigned long arg)
 {
 	struct ide_tape_obj *tape = file->private_data;
@@ -1420,6 +1420,16 @@ static int idetape_chrdev_ioctl(struct inode *inode, struct file *file,
 	}
 }
 
+static long idetape_chrdev_ioctl(struct file *file,
+				unsigned int cmd, unsigned long arg)
+{
+	long ret;
+	lock_kernel();
+	ret = do_idetape_chrdev_ioctl(file, cmd, arg);
+	unlock_kernel();
+	return ret;
+}
+
 /*
  * Do a mode sense page 0 with block descriptor and if it succeeds set the tape
  * block size with the reported value.
@@ -1888,7 +1898,7 @@ static const struct file_operations idetape_fops = {
 	.owner		= THIS_MODULE,
 	.read		= idetape_chrdev_read,
 	.write		= idetape_chrdev_write,
-	.ioctl		= idetape_chrdev_ioctl,
+	.unlocked_ioctl	= idetape_chrdev_ioctl,
 	.open		= idetape_chrdev_open,
 	.release	= idetape_chrdev_release,
 };
-- 
cgit v1.2.3-59-g8ed1b


From d4ae5415c6f2dd8f14e027c24f09d708f11a8d60 Mon Sep 17 00:00:00 2001
From: Wolfram Sang <w.sang@pengutronix.de>
Date: Fri, 15 Jan 2010 01:33:08 -0800
Subject: ide/ide-cs: fix order of releasing resources

ide_detach() called first ide_release() and then release_region(). This
produced the following warnings:

  Trying to free nonexistent resource <000000000000c10e-000000000000c10e>
  Trying to free nonexistent resource <000000000000c100-000000000000c107>

This is true, because the callchain inside ide_release() is:

  ide_release -> pcmcia_disable_device -> pcmcia_release_io

So, the whole io-block is already gone for release_region(). To fix
this, just swap the order of releasing (and remove the now obsolete
shadowing).

bzolnier:
- release resources in ide_release() to fix ordering of events
- remove stale FIXME note while at it

Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/ide/ide-cs.c | 23 +++++++++++------------
 1 file changed, 11 insertions(+), 12 deletions(-)

(limited to 'drivers')

diff --git a/drivers/ide/ide-cs.c b/drivers/ide/ide-cs.c
index dd6396384c25..ab87e4f7cec9 100644
--- a/drivers/ide/ide-cs.c
+++ b/drivers/ide/ide-cs.c
@@ -121,19 +121,11 @@ static int ide_probe(struct pcmcia_device *link)
 static void ide_detach(struct pcmcia_device *link)
 {
     ide_info_t *info = link->priv;
-    ide_hwif_t *hwif = info->host->ports[0];
-    unsigned long data_addr, ctl_addr;
 
     dev_dbg(&link->dev, "ide_detach(0x%p)\n", link);
 
-    data_addr = hwif->io_ports.data_addr;
-    ctl_addr  = hwif->io_ports.ctl_addr;
-
     ide_release(link);
 
-    release_region(ctl_addr, 1);
-    release_region(data_addr, 8);
-
     kfree(info);
 } /* ide_detach */
 
@@ -354,12 +346,19 @@ static void ide_release(struct pcmcia_device *link)
 
     dev_dbg(&link->dev, "ide_release(0x%p)\n", link);
 
-    if (info->ndev)
-	/* FIXME: if this fails we need to queue the cleanup somehow
-	   -- need to investigate the required PCMCIA magic */
+    if (info->ndev) {
+	ide_hwif_t *hwif = host->ports[0];
+	unsigned long data_addr, ctl_addr;
+
+	data_addr = hwif->io_ports.data_addr;
+	ctl_addr = hwif->io_ports.ctl_addr;
+
 	ide_host_remove(host);
+	info->ndev = 0;
 
-    info->ndev = 0;
+	release_region(ctl_addr, 1);
+	release_region(data_addr, 8);
+    }
 
     pcmcia_disable_device(link);
 } /* ide_release */
-- 
cgit v1.2.3-59-g8ed1b


From 2b7d03a5cdace237525643d48918e68fe24681ed Mon Sep 17 00:00:00 2001
From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Date: Mon, 18 Jan 2010 07:17:29 +0000
Subject: ide: use standard timing for XFER_PIO_SLOW mode in
 ide_timing_compute()

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/ide/ide-timings.c | 13 +++++++------
 1 file changed, 7 insertions(+), 6 deletions(-)

(limited to 'drivers')

diff --git a/drivers/ide/ide-timings.c b/drivers/ide/ide-timings.c
index 001a56365be5..c6053ab2b6c6 100644
--- a/drivers/ide/ide-timings.c
+++ b/drivers/ide/ide-timings.c
@@ -166,12 +166,13 @@ int ide_timing_compute(ide_drive_t *drive, u8 speed,
 	if (id[ATA_ID_FIELD_VALID] & 2) {	/* EIDE drive */
 		memset(&p, 0, sizeof(p));
 
-		if (speed <= XFER_PIO_2)
-			p.cycle = p.cyc8b = id[ATA_ID_EIDE_PIO];
-		else if ((speed <= XFER_PIO_4) ||
-			 (speed == XFER_PIO_5 && !ata_id_is_cfa(id)))
-			p.cycle = p.cyc8b = id[ATA_ID_EIDE_PIO_IORDY];
-		else if (speed >= XFER_MW_DMA_0 && speed <= XFER_MW_DMA_2)
+		if (speed >= XFER_PIO_0 && speed <= XFER_SW_DMA_0) {
+			if (speed <= XFER_PIO_2)
+				p.cycle = p.cyc8b = id[ATA_ID_EIDE_PIO];
+			else if ((speed <= XFER_PIO_4) ||
+				 (speed == XFER_PIO_5 && !ata_id_is_cfa(id)))
+				p.cycle = p.cyc8b = id[ATA_ID_EIDE_PIO_IORDY];
+		} else if (speed >= XFER_MW_DMA_0 && speed <= XFER_MW_DMA_2)
 			p.cycle = id[ATA_ID_EIDE_DMA_MIN];
 
 		ide_timing_merge(&p, t, t, IDE_TIMING_CYCLE | IDE_TIMING_CYC8B);
-- 
cgit v1.2.3-59-g8ed1b


From 3c8cc8df5a67a539cd185026e6b6f49b576869ba Mon Sep 17 00:00:00 2001
From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Date: Mon, 18 Jan 2010 07:17:37 +0000
Subject: alim15x3: fix PIO timings calculations

Just use the standard ide_timing_compute() helper to calculate
PIO timings.  This fixes many issues with the open-coded version
like potential recovery timings underclocking or not accounting
for the enhanced cycle time specified by the device.

Based on libata pata_ali host driver.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/ide/alim15x3.c | 34 +++++++++++++++-------------------
 1 file changed, 15 insertions(+), 19 deletions(-)

(limited to 'drivers')

diff --git a/drivers/ide/alim15x3.c b/drivers/ide/alim15x3.c
index 0abc43f3101e..99c355e87850 100644
--- a/drivers/ide/alim15x3.c
+++ b/drivers/ide/alim15x3.c
@@ -8,7 +8,7 @@
  *  Copyright (C) 2002 Alan Cox
  *  ALi (now ULi M5228) support by Clear Zhang <Clear.Zhang@ali.com.tw>
  *  Copyright (C) 2007 MontaVista Software, Inc. <source@mvista.com>
- *  Copyright (C) 2007 Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
+ *  Copyright (C) 2007-2010 Bartlomiej Zolnierkiewicz
  *
  *  (U)DMA capable version of ali 1533/1543(C), 1535(D)
  *
@@ -60,28 +60,22 @@ static void ali_set_pio_mode(ide_drive_t *drive, const u8 pio)
 {
 	ide_hwif_t *hwif = drive->hwif;
 	struct pci_dev *dev = to_pci_dev(hwif->dev);
-	struct ide_timing *t = ide_timing_find_mode(XFER_PIO_0 + pio);
-	int s_time = t->setup, a_time = t->active, c_time = t->cycle;
-	u8 s_clc, a_clc, r_clc;
 	unsigned long flags;
 	int bus_speed = ide_pci_clk ? ide_pci_clk : 33;
+	unsigned long T =  1000000 / bus_speed; /* PCI clock based */
 	int port = hwif->channel ? 0x5c : 0x58;
 	int portFIFO = hwif->channel ? 0x55 : 0x54;
 	u8 cd_dma_fifo = 0, unit = drive->dn & 1;
+	struct ide_timing t;
 
-	if ((s_clc = (s_time * bus_speed + 999) / 1000) >= 8)
-		s_clc = 0;
-	if ((a_clc = (a_time * bus_speed + 999) / 1000) >= 8)
-		a_clc = 0;
+	ide_timing_compute(drive, XFER_PIO_0 + pio, &t, T, 1);
+
+	t.setup = clamp_val(t.setup, 1, 8) & 7;
+	t.active = clamp_val(t.active, 1, 8) & 7;
+	t.recover = clamp_val(t.recover, 1, 16) & 15;
 
-	if (!(r_clc = (c_time * bus_speed + 999) / 1000 - a_clc - s_clc)) {
-		r_clc = 1;
-	} else {
-		if (r_clc >= 16)
-			r_clc = 0;
-	}
 	local_irq_save(flags);
-	
+
 	/* 
 	 * PIO mode => ATA FIFO on, ATAPI FIFO off
 	 */
@@ -99,9 +93,11 @@ static void ali_set_pio_mode(ide_drive_t *drive, const u8 pio)
 			pci_write_config_byte(dev, portFIFO, cd_dma_fifo & 0xF0);
 		}
 	}
-	
-	pci_write_config_byte(dev, port, s_clc);
-	pci_write_config_byte(dev, port + unit + 2, (a_clc << 4) | r_clc);
+
+	pci_write_config_byte(dev, port, t.setup);
+	pci_write_config_byte(dev, port + unit + 2,
+			      (t.active << 4) | t.recover);
+
 	local_irq_restore(flags);
 }
 
@@ -584,6 +580,6 @@ static void __exit ali15x3_ide_exit(void)
 module_init(ali15x3_ide_init);
 module_exit(ali15x3_ide_exit);
 
-MODULE_AUTHOR("Michael Aubry, Andrzej Krzysztofowicz, CJ, Andre Hedrick, Alan Cox");
+MODULE_AUTHOR("Michael Aubry, Andrzej Krzysztofowicz, CJ, Andre Hedrick, Alan Cox, Bartlomiej Zolnierkiewicz");
 MODULE_DESCRIPTION("PCI driver module for ALi 15x3 IDE");
 MODULE_LICENSE("GPL");
-- 
cgit v1.2.3-59-g8ed1b


From 293f18ad720f7c10f9f4b8a87827a1f0989e19ee Mon Sep 17 00:00:00 2001
From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Date: Mon, 18 Jan 2010 07:17:50 +0000
Subject: alim15x3: add ali_fifo_control() helper

Based on libata pata_ali host driver.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/ide/alim15x3.c | 31 +++++++++++++++----------------
 1 file changed, 15 insertions(+), 16 deletions(-)

(limited to 'drivers')

diff --git a/drivers/ide/alim15x3.c b/drivers/ide/alim15x3.c
index 99c355e87850..4b47896df9f9 100644
--- a/drivers/ide/alim15x3.c
+++ b/drivers/ide/alim15x3.c
@@ -48,6 +48,19 @@ static u8 m5229_revision;
 static u8 chip_is_1543c_e;
 static struct pci_dev *isa_dev;
 
+static void ali_fifo_control(ide_hwif_t *hwif, ide_drive_t *drive, int on)
+{
+	struct pci_dev *pdev = to_pci_dev(hwif->dev);
+	int pio_fifo = 0x54 + hwif->channel;
+	u8 fifo;
+	int shift = 4 * (drive->dn & 1);
+
+	pci_read_config_byte(pdev, pio_fifo, &fifo);
+	fifo &= ~(0x0F << shift);
+	fifo |= (on << shift);
+	pci_write_config_byte(pdev, pio_fifo, fifo);
+}
+
 /**
  *	ali_set_pio_mode	-	set host controller for PIO mode
  *	@drive: drive
@@ -64,8 +77,7 @@ static void ali_set_pio_mode(ide_drive_t *drive, const u8 pio)
 	int bus_speed = ide_pci_clk ? ide_pci_clk : 33;
 	unsigned long T =  1000000 / bus_speed; /* PCI clock based */
 	int port = hwif->channel ? 0x5c : 0x58;
-	int portFIFO = hwif->channel ? 0x55 : 0x54;
-	u8 cd_dma_fifo = 0, unit = drive->dn & 1;
+	u8 unit = drive->dn & 1;
 	struct ide_timing t;
 
 	ide_timing_compute(drive, XFER_PIO_0 + pio, &t, T, 1);
@@ -79,20 +91,7 @@ static void ali_set_pio_mode(ide_drive_t *drive, const u8 pio)
 	/* 
 	 * PIO mode => ATA FIFO on, ATAPI FIFO off
 	 */
-	pci_read_config_byte(dev, portFIFO, &cd_dma_fifo);
-	if (drive->media==ide_disk) {
-		if (unit) {
-			pci_write_config_byte(dev, portFIFO, (cd_dma_fifo & 0x0F) | 0x50);
-		} else {
-			pci_write_config_byte(dev, portFIFO, (cd_dma_fifo & 0xF0) | 0x05);
-		}
-	} else {
-		if (unit) {
-			pci_write_config_byte(dev, portFIFO, cd_dma_fifo & 0x0F);
-		} else {
-			pci_write_config_byte(dev, portFIFO, cd_dma_fifo & 0xF0);
-		}
-	}
+	ali_fifo_control(hwif, drive, (drive->media == ide_disk) ? 0x05 : 0x00);
 
 	pci_write_config_byte(dev, port, t.setup);
 	pci_write_config_byte(dev, port + unit + 2,
-- 
cgit v1.2.3-59-g8ed1b


From 5f6bd68ef539402b25e25d5e3324c59004541d77 Mon Sep 17 00:00:00 2001
From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Date: Mon, 18 Jan 2010 07:17:59 +0000
Subject: alim15x3: remove superfluous locking from ali_set_pio_mode()

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/ide/alim15x3.c | 5 -----
 1 file changed, 5 deletions(-)

(limited to 'drivers')

diff --git a/drivers/ide/alim15x3.c b/drivers/ide/alim15x3.c
index 4b47896df9f9..dabd986216fe 100644
--- a/drivers/ide/alim15x3.c
+++ b/drivers/ide/alim15x3.c
@@ -73,7 +73,6 @@ static void ali_set_pio_mode(ide_drive_t *drive, const u8 pio)
 {
 	ide_hwif_t *hwif = drive->hwif;
 	struct pci_dev *dev = to_pci_dev(hwif->dev);
-	unsigned long flags;
 	int bus_speed = ide_pci_clk ? ide_pci_clk : 33;
 	unsigned long T =  1000000 / bus_speed; /* PCI clock based */
 	int port = hwif->channel ? 0x5c : 0x58;
@@ -86,8 +85,6 @@ static void ali_set_pio_mode(ide_drive_t *drive, const u8 pio)
 	t.active = clamp_val(t.active, 1, 8) & 7;
 	t.recover = clamp_val(t.recover, 1, 16) & 15;
 
-	local_irq_save(flags);
-
 	/* 
 	 * PIO mode => ATA FIFO on, ATAPI FIFO off
 	 */
@@ -96,8 +93,6 @@ static void ali_set_pio_mode(ide_drive_t *drive, const u8 pio)
 	pci_write_config_byte(dev, port, t.setup);
 	pci_write_config_byte(dev, port + unit + 2,
 			      (t.active << 4) | t.recover);
-
-	local_irq_restore(flags);
 }
 
 /**
-- 
cgit v1.2.3-59-g8ed1b


From d23f33de3c7fdc4bcbdd7a75d3f7b7be32caf18e Mon Sep 17 00:00:00 2001
From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Date: Mon, 18 Jan 2010 07:18:07 +0000
Subject: alim15x3: cleanup ali_cable_detect()

Remove leftover local_irq_[save,restore]() and FIXME note.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/ide/alim15x3.c | 8 --------
 1 file changed, 8 deletions(-)

(limited to 'drivers')

diff --git a/drivers/ide/alim15x3.c b/drivers/ide/alim15x3.c
index dabd986216fe..8f03cce055fa 100644
--- a/drivers/ide/alim15x3.c
+++ b/drivers/ide/alim15x3.c
@@ -345,19 +345,13 @@ static int ali_cable_override(struct pci_dev *pdev)
  *
  *	This checks if the controller and the cable are capable
  *	of UDMA66 transfers. It doesn't check the drives.
- *	But see note 2 below!
- *
- *	FIXME: frobs bits that are not defined on newer ALi devicea
  */
 
 static u8 ali_cable_detect(ide_hwif_t *hwif)
 {
 	struct pci_dev *dev = to_pci_dev(hwif->dev);
-	unsigned long flags;
 	u8 cbl = ATA_CBL_PATA40, tmpbyte;
 
-	local_irq_save(flags);
-
 	if (m5229_revision >= 0xC2) {
 		/*
 		 * m5229 80-pin cable detection (from Host View)
@@ -377,8 +371,6 @@ static u8 ali_cable_detect(ide_hwif_t *hwif)
 		}
 	}
 
-	local_irq_restore(flags);
-
 	return cbl;
 }
 
-- 
cgit v1.2.3-59-g8ed1b


From 31bbb668fbe71a207d38ecd1797f4cd5b8bd710b Mon Sep 17 00:00:00 2001
From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Date: Mon, 18 Jan 2010 07:18:17 +0000
Subject: amd74xx: don't change UDMA settings when programming PIO timings

Based on libata pata_amd host driver.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/ide/amd74xx.c | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

(limited to 'drivers')

diff --git a/drivers/ide/amd74xx.c b/drivers/ide/amd74xx.c
index 628cd2e5fed8..108e9b676859 100644
--- a/drivers/ide/amd74xx.c
+++ b/drivers/ide/amd74xx.c
@@ -3,7 +3,7 @@
  * IDE driver for Linux.
  *
  * Copyright (c) 2000-2002 Vojtech Pavlik
- * Copyright (c) 2007-2008 Bartlomiej Zolnierkiewicz
+ * Copyright (c) 2007-2010 Bartlomiej Zolnierkiewicz
  *
  * Based on the work of:
  *      Andre Hedrick
@@ -70,7 +70,8 @@ static void amd_set_speed(struct pci_dev *dev, u8 dn, u8 udma_mask,
 	default: return;
 	}
 
-	pci_write_config_byte(dev, AMD_UDMA_TIMING + offset + (3 - dn), t);
+	if (timing->udma)
+		pci_write_config_byte(dev, AMD_UDMA_TIMING + offset + 3 - dn, t);
 }
 
 /*
@@ -340,6 +341,6 @@ static void __exit amd74xx_ide_exit(void)
 module_init(amd74xx_ide_init);
 module_exit(amd74xx_ide_exit);
 
-MODULE_AUTHOR("Vojtech Pavlik");
+MODULE_AUTHOR("Vojtech Pavlik, Bartlomiej Zolnierkiewicz");
 MODULE_DESCRIPTION("AMD PCI IDE driver");
 MODULE_LICENSE("GPL");
-- 
cgit v1.2.3-59-g8ed1b


From 60349ab99f2742a6f04da86724740498c7b1f885 Mon Sep 17 00:00:00 2001
From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Date: Mon, 18 Jan 2010 07:18:26 +0000
Subject: cmd64x: fix PIO and MWDMA timings calculations

Just use the standard ide_timing_compute() helper to calculate
PIO and MWDMA timings.  This fixes some issues with the open-coded
version like allowing faster MWDMA timings than the ones required
by the current PIO mode or not accounting for the enhanced MWDMA
cycle time specified by the device.

Based on libata pata_cmd64x host driver.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/ide/cmd64x.c | 88 +++++++++++++++++-----------------------------------
 1 file changed, 29 insertions(+), 59 deletions(-)

(limited to 'drivers')

diff --git a/drivers/ide/cmd64x.c b/drivers/ide/cmd64x.c
index f2500c8826bb..5c5dd90d032b 100644
--- a/drivers/ide/cmd64x.c
+++ b/drivers/ide/cmd64x.c
@@ -7,6 +7,7 @@
  * Copyright (C) 1998		David S. Miller (davem@redhat.com)
  *
  * Copyright (C) 1999-2002	Andre Hedrick <andre@linux-ide.org>
+ * Copyright (C) 2007-2010	Bartlomiej Zolnierkiewicz
  * Copyright (C) 2007,2009	MontaVista Software, Inc. <source@mvista.com>
  */
 
@@ -50,72 +51,45 @@
 #define UDIDETCR1	0x7B
 #define DTPR1		0x7C
 
-static u8 quantize_timing(int timing, int quant)
-{
-	return (timing + quant - 1) / quant;
-}
-
-/*
- * This routine calculates active/recovery counts and then writes them into
- * the chipset registers.
- */
-static void program_cycle_times (ide_drive_t *drive, int cycle_time, int active_time)
+static void cmd64x_program_timings(ide_drive_t *drive, u8 mode)
 {
+	ide_hwif_t *hwif = drive->hwif;
 	struct pci_dev *dev = to_pci_dev(drive->hwif->dev);
-	int clock_time = 1000 / (ide_pci_clk ? ide_pci_clk : 33);
-	u8  cycle_count, active_count, recovery_count, drwtim;
+	int bus_speed = ide_pci_clk ? ide_pci_clk : 33;
+	const unsigned long T = 1000000 / bus_speed;
 	static const u8 recovery_values[] =
 		{15, 15, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 0};
+	static const u8 setup_values[] = {0x40, 0x40, 0x40, 0x80, 0, 0xc0};
+	static const u8 arttim_regs[4] = {ARTTIM0, ARTTIM1, ARTTIM23, ARTTIM23};
 	static const u8 drwtim_regs[4] = {DRWTIM0, DRWTIM1, DRWTIM2, DRWTIM3};
+	struct ide_timing t;
+	u8 arttim = 0;
 
-	cycle_count	= quantize_timing( cycle_time, clock_time);
-	active_count	= quantize_timing(active_time, clock_time);
-	recovery_count	= cycle_count - active_count;
+	ide_timing_compute(drive, mode, &t, T, 0);
 
 	/*
 	 * In case we've got too long recovery phase, try to lengthen
 	 * the active phase
 	 */
-	if (recovery_count > 16) {
-		active_count += recovery_count - 16;
-		recovery_count = 16;
+	if (t.recover > 16) {
+		t.active += t.recover - 16;
+		t.recover = 16;
 	}
-	if (active_count > 16)		/* shouldn't actually happen... */
-	 	active_count = 16;
+	if (t.active > 16)		/* shouldn't actually happen... */
+		t.active = 16;
 
 	/*
 	 * Convert values to internal chipset representation
 	 */
-	recovery_count = recovery_values[recovery_count];
- 	active_count  &= 0x0f;
+	t.recover = recovery_values[t.recover];
+	t.active &= 0x0f;
 
 	/* Program the active/recovery counts into the DRWTIM register */
-	drwtim = (active_count << 4) | recovery_count;
-	(void) pci_write_config_byte(dev, drwtim_regs[drive->dn], drwtim);
-}
+	pci_write_config_byte(dev, drwtim_regs[drive->dn],
+			      (t.active << 4) | t.recover);
 
-/*
- * This routine writes into the chipset registers
- * PIO setup/active/recovery timings.
- */
-static void cmd64x_tune_pio(ide_drive_t *drive, const u8 pio)
-{
-	ide_hwif_t *hwif	= drive->hwif;
-	struct pci_dev *dev	= to_pci_dev(hwif->dev);
-	struct ide_timing *t	= ide_timing_find_mode(XFER_PIO_0 + pio);
-	unsigned long setup_count;
-	unsigned int cycle_time;
-	u8 arttim = 0;
-
-	static const u8 setup_values[] = {0x40, 0x40, 0x40, 0x80, 0, 0xc0};
-	static const u8 arttim_regs[4] = {ARTTIM0, ARTTIM1, ARTTIM23, ARTTIM23};
-
-	cycle_time = ide_pio_cycle_time(drive, pio);
-
-	program_cycle_times(drive, cycle_time, t->active);
-
-	setup_count = quantize_timing(t->setup,
-			1000 / (ide_pci_clk ? ide_pci_clk : 33));
+	if (mode >= XFER_SW_DMA_0)
+		return;
 
 	/*
 	 * The primary channel has individual address setup timing registers
@@ -126,15 +100,15 @@ static void cmd64x_tune_pio(ide_drive_t *drive, const u8 pio)
 	if (hwif->channel) {
 		ide_drive_t *pair = ide_get_pair_dev(drive);
 
-		ide_set_drivedata(drive, (void *)setup_count);
+		ide_set_drivedata(drive, (void *)(unsigned long)t.setup);
 
 		if (pair)
-			setup_count = max_t(u8, setup_count,
+			t.setup = max_t(u8, t.setup,
 					(unsigned long)ide_get_drivedata(pair));
 	}
 
-	if (setup_count > 5)		/* shouldn't actually happen... */
-		setup_count = 5;
+	if (t.setup > 5)		/* shouldn't actually happen... */
+		t.setup = 5;
 
 	/*
 	 * Program the address setup clocks into the ARTTIM registers.
@@ -144,7 +118,7 @@ static void cmd64x_tune_pio(ide_drive_t *drive, const u8 pio)
 	if (hwif->channel)
 		arttim &= ~ARTTIM23_INTR_CH1;
 	arttim &= ~0xc0;
-	arttim |= setup_values[setup_count];
+	arttim |= setup_values[t.setup];
 	(void) pci_write_config_byte(dev, arttim_regs[drive->dn], arttim);
 }
 
@@ -162,7 +136,7 @@ static void cmd64x_set_pio_mode(ide_drive_t *drive, const u8 pio)
 	if (pio == 8 || pio == 9)
 		return;
 
-	cmd64x_tune_pio(drive, pio);
+	cmd64x_program_timings(drive, XFER_PIO_0 + pio);
 }
 
 static void cmd64x_set_dma_mode(ide_drive_t *drive, const u8 speed)
@@ -197,13 +171,9 @@ static void cmd64x_set_dma_mode(ide_drive_t *drive, const u8 speed)
 		regU |= unit ? 0xC2 : 0x31;
 		break;
 	case XFER_MW_DMA_2:
-		program_cycle_times(drive, 120, 70);
-		break;
 	case XFER_MW_DMA_1:
-		program_cycle_times(drive, 150, 80);
-		break;
 	case XFER_MW_DMA_0:
-		program_cycle_times(drive, 480, 215);
+		cmd64x_program_timings(drive, speed);
 		break;
 	}
 
@@ -471,6 +441,6 @@ static void __exit cmd64x_ide_exit(void)
 module_init(cmd64x_ide_init);
 module_exit(cmd64x_ide_exit);
 
-MODULE_AUTHOR("Eddie Dost, David Miller, Andre Hedrick");
+MODULE_AUTHOR("Eddie Dost, David Miller, Andre Hedrick, Bartlomiej Zolnierkiewicz");
 MODULE_DESCRIPTION("PCI driver module for CMD64x IDE");
 MODULE_LICENSE("GPL");
-- 
cgit v1.2.3-59-g8ed1b


From 22cabc2619a58d3e5f95bb8df823da535e103bf4 Mon Sep 17 00:00:00 2001
From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Date: Mon, 18 Jan 2010 07:18:38 +0000
Subject: cmd64x: remove superfluous checks from cmd64x_set_dma_mode()

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/ide/cmd64x.c | 9 +++------
 1 file changed, 3 insertions(+), 6 deletions(-)

(limited to 'drivers')

diff --git a/drivers/ide/cmd64x.c b/drivers/ide/cmd64x.c
index 5c5dd90d032b..9f89f3116df0 100644
--- a/drivers/ide/cmd64x.c
+++ b/drivers/ide/cmd64x.c
@@ -146,10 +146,8 @@ static void cmd64x_set_dma_mode(ide_drive_t *drive, const u8 speed)
 	u8 unit			= drive->dn & 0x01;
 	u8 regU = 0, pciU	= hwif->channel ? UDIDETCR1 : UDIDETCR0;
 
-	if (speed >= XFER_SW_DMA_0) {
-		(void) pci_read_config_byte(dev, pciU, &regU);
-		regU &= ~(unit ? 0xCA : 0x35);
-	}
+	pci_read_config_byte(dev, pciU, &regU);
+	regU &= ~(unit ? 0xCA : 0x35);
 
 	switch(speed) {
 	case XFER_UDMA_5:
@@ -177,8 +175,7 @@ static void cmd64x_set_dma_mode(ide_drive_t *drive, const u8 speed)
 		break;
 	}
 
-	if (speed >= XFER_SW_DMA_0)
-		(void) pci_write_config_byte(dev, pciU, regU);
+	pci_write_config_byte(dev, pciU, regU);
 }
 
 static void cmd648_clear_irq(ide_drive_t *drive)
-- 
cgit v1.2.3-59-g8ed1b


From 4d6b328943e87258efdc30110335a681f52d8367 Mon Sep 17 00:00:00 2001
From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Date: Mon, 18 Jan 2010 07:18:47 +0000
Subject: cy82c693: fix PIO timings calculations

Just use the standard ide_timing_compute() helper to calculate
PIO timings.  This fixes many issues with the open-coded version
like using 16-bit timings when 8-bit ones should be used or not
accounting for the enhanced cycle time specified by the device.

Based on libata pata_cypress host driver.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/ide/cy82c693.c | 106 ++++++++++---------------------------------------
 1 file changed, 20 insertions(+), 86 deletions(-)

(limited to 'drivers')

diff --git a/drivers/ide/cy82c693.c b/drivers/ide/cy82c693.c
index d6e2cbbc53a0..49dfb8d40dcf 100644
--- a/drivers/ide/cy82c693.c
+++ b/drivers/ide/cy82c693.c
@@ -1,6 +1,7 @@
 /*
  *  Copyright (C) 1998-2000 Andreas S. Krebs (akrebs@altavista.net), Maintainer
  *  Copyright (C) 1998-2002 Andre Hedrick <andre@linux-ide.org>, Integrator
+ *  Copyright (C) 2007-2010 Bartlomiej Zolnierkiewicz
  *
  * CYPRESS CY82C693 chipset IDE controller
  *
@@ -81,80 +82,6 @@
 #define CY82_INDEX_CHANNEL1	0x31
 #define CY82_INDEX_TIMEOUT	0x32
 
-/* the min and max PCI bus speed in MHz - from datasheet */
-#define CY82C963_MIN_BUS_SPEED	25
-#define CY82C963_MAX_BUS_SPEED	33
-
-/* the struct for the PIO mode timings */
-typedef struct pio_clocks_s {
-	u8	address_time;	/* Address setup (clocks) */
-	u8	time_16r;	/* clocks for 16bit IOR (0xF0=Active/data, 0x0F=Recovery) */
-	u8	time_16w;	/* clocks for 16bit IOW (0xF0=Active/data, 0x0F=Recovery) */
-	u8	time_8;		/* clocks for 8bit (0xF0=Active/data, 0x0F=Recovery) */
-} pio_clocks_t;
-
-/*
- * calc clocks using bus_speed
- * returns (rounded up) time in bus clocks for time in ns
- */
-static int calc_clk(int time, int bus_speed)
-{
-	int clocks;
-
-	clocks = (time*bus_speed+999)/1000 - 1;
-
-	if (clocks < 0)
-		clocks = 0;
-
-	if (clocks > 0x0F)
-		clocks = 0x0F;
-
-	return clocks;
-}
-
-/*
- * compute the values for the clock registers for PIO
- * mode and pci_clk [MHz] speed
- *
- * NOTE: for mode 0,1 and 2 drives 8-bit IDE command control registers are used
- *       for mode 3 and 4 drives 8 and 16-bit timings are the same
- *
- */
-static void compute_clocks(u8 pio, pio_clocks_t *p_pclk)
-{
-	struct ide_timing *t = ide_timing_find_mode(XFER_PIO_0 + pio);
-	int clk1, clk2;
-	int bus_speed = ide_pci_clk ? ide_pci_clk : 33;
-
-	/* we don't check against CY82C693's min and max speed,
-	 * so you can play with the idebus=xx parameter
-	 */
-
-	/* let's calc the address setup time clocks */
-	p_pclk->address_time = (u8)calc_clk(t->setup, bus_speed);
-
-	/* let's calc the active and recovery time clocks */
-	clk1 = calc_clk(t->active, bus_speed);
-
-	/* calc recovery timing */
-	clk2 = t->cycle - t->active - t->setup;
-
-	clk2 = calc_clk(clk2, bus_speed);
-
-	clk1 = (clk1<<4)|clk2;	/* combine active and recovery clocks */
-
-	/* note: we use the same values for 16bit IOR and IOW
-	 *	those are all the same, since I don't have other
-	 *	timings than those from ide-lib.c
-	 */
-
-	p_pclk->time_16r = (u8)clk1;
-	p_pclk->time_16w = (u8)clk1;
-
-	/* what are good values for 8bit ?? */
-	p_pclk->time_8 = (u8)clk1;
-}
-
 /*
  * set DMA mode a specific channel for CY82C693
  */
@@ -190,8 +117,11 @@ static void cy82c693_set_pio_mode(ide_drive_t *drive, const u8 pio)
 {
 	ide_hwif_t *hwif = drive->hwif;
 	struct pci_dev *dev = to_pci_dev(hwif->dev);
-	pio_clocks_t pclk;
+	int bus_speed = ide_pci_clk ? ide_pci_clk : 33;
+	const unsigned long T = 1000000 / bus_speed;
 	unsigned int addrCtrl;
+	struct ide_timing t;
+	u8 time_16, time_8;
 
 	/* select primary or secondary channel */
 	if (hwif->index > 0) {  /* drive is on the secondary channel */
@@ -204,8 +134,12 @@ static void cy82c693_set_pio_mode(ide_drive_t *drive, const u8 pio)
 		}
 	}
 
-	/* let's calc the values for this PIO mode */
-	compute_clocks(pio, &pclk);
+	ide_timing_compute(drive, XFER_PIO_0 + pio, &t, T, 1);
+
+	time_16 = clamp_val(t.recover - 1, 0, 15) |
+		  (clamp_val(t.active - 1, 0, 15) << 4);
+	time_8 = clamp_val(t.act8b - 1, 0, 15) |
+		 (clamp_val(t.rec8b - 1, 0, 15) << 4);
 
 	/* now let's write  the clocks registers */
 	if ((drive->dn & 1) == 0) {
@@ -217,13 +151,13 @@ static void cy82c693_set_pio_mode(ide_drive_t *drive, const u8 pio)
 		pci_read_config_dword(dev, CY82_IDE_ADDRSETUP, &addrCtrl);
 
 		addrCtrl &= (~0xF);
-		addrCtrl |= (unsigned int)pclk.address_time;
+		addrCtrl |= clamp_val(t.setup - 1, 0, 15);
 		pci_write_config_dword(dev, CY82_IDE_ADDRSETUP, addrCtrl);
 
 		/* now let's set the remaining registers */
-		pci_write_config_byte(dev, CY82_IDE_MASTER_IOR, pclk.time_16r);
-		pci_write_config_byte(dev, CY82_IDE_MASTER_IOW, pclk.time_16w);
-		pci_write_config_byte(dev, CY82_IDE_MASTER_8BIT, pclk.time_8);
+		pci_write_config_byte(dev, CY82_IDE_MASTER_IOR, time_16);
+		pci_write_config_byte(dev, CY82_IDE_MASTER_IOW, time_16);
+		pci_write_config_byte(dev, CY82_IDE_MASTER_8BIT, time_8);
 	} else {
 		/*
 		 * set slave drive
@@ -233,13 +167,13 @@ static void cy82c693_set_pio_mode(ide_drive_t *drive, const u8 pio)
 		pci_read_config_dword(dev, CY82_IDE_ADDRSETUP, &addrCtrl);
 
 		addrCtrl &= (~0xF0);
-		addrCtrl |= ((unsigned int)pclk.address_time<<4);
+		addrCtrl |= (clamp_val(t.setup - 1, 0, 15) << 4);
 		pci_write_config_dword(dev, CY82_IDE_ADDRSETUP, addrCtrl);
 
 		/* now let's set the remaining registers */
-		pci_write_config_byte(dev, CY82_IDE_SLAVE_IOR, pclk.time_16r);
-		pci_write_config_byte(dev, CY82_IDE_SLAVE_IOW, pclk.time_16w);
-		pci_write_config_byte(dev, CY82_IDE_SLAVE_8BIT, pclk.time_8);
+		pci_write_config_byte(dev, CY82_IDE_SLAVE_IOR, time_16);
+		pci_write_config_byte(dev, CY82_IDE_SLAVE_IOW, time_16);
+		pci_write_config_byte(dev, CY82_IDE_SLAVE_8BIT, time_8);
 	}
 }
 
@@ -325,6 +259,6 @@ static void __exit cy82c693_ide_exit(void)
 module_init(cy82c693_ide_init);
 module_exit(cy82c693_ide_exit);
 
-MODULE_AUTHOR("Andreas Krebs, Andre Hedrick");
+MODULE_AUTHOR("Andreas Krebs, Andre Hedrick, Bartlomiej Zolnierkiewicz");
 MODULE_DESCRIPTION("PCI driver module for the Cypress CY82C693 IDE");
 MODULE_LICENSE("GPL");
-- 
cgit v1.2.3-59-g8ed1b


From bd37f65a60c3bb5ec11b47d7e8b539beb87324a9 Mon Sep 17 00:00:00 2001
From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Date: Mon, 18 Jan 2010 07:18:58 +0000
Subject: cy82c693: remove stale driver history

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/ide/cy82c693.c | 33 ---------------------------------
 1 file changed, 33 deletions(-)

(limited to 'drivers')

diff --git a/drivers/ide/cy82c693.c b/drivers/ide/cy82c693.c
index 49dfb8d40dcf..fbf3dcc26577 100644
--- a/drivers/ide/cy82c693.c
+++ b/drivers/ide/cy82c693.c
@@ -6,39 +6,6 @@
  * CYPRESS CY82C693 chipset IDE controller
  *
  * The CY82C693 chipset is used on Digital's PC-Alpha 164SX boards.
- * Writing the driver was quite simple, since most of the job is
- * done by the generic pci-ide support.
- * The hard part was finding the CY82C693's datasheet on Cypress's
- * web page :-(. But Altavista solved this problem :-).
- *
- *
- * Notes:
- * - I recently got a 16.8G IBM DTTA, so I was able to test it with
- *   a large and fast disk - the results look great, so I'd say the
- *   driver is working fine :-)
- *   hdparm -t reports 8.17 MB/sec at about 6% CPU usage for the DTTA
- * - this is my first linux driver, so there's probably a lot  of room
- *   for optimizations and bug fixing, so feel free to do it.
- * - if using PIO mode it's a good idea to set the PIO mode and
- *   32-bit I/O support (if possible), e.g. hdparm -p2 -c1 /dev/hda
- * - I had some problems with my IBM DHEA with PIO modes < 2
- *   (lost interrupts) ?????
- * - first tests with DMA look okay, they seem to work, but there is a
- *   problem with sound - the BusMaster IDE TimeOut should fixed this
- *
- * Ancient History:
- * AMH@1999-08-24: v0.34 init_cy82c693_chip moved to pci_init_cy82c693
- * ASK@1999-01-23: v0.33 made a few minor code clean ups
- *                       removed DMA clock speed setting by default
- *                       added boot message
- * ASK@1998-11-01: v0.32 added support to set BusMaster IDE TimeOut
- *                       added support to set DMA Controller Clock Speed
- * ASK@1998-10-31: v0.31 fixed problem with setting to high DMA modes
- *                       on some drives.
- * ASK@1998-10-29: v0.3 added support to set DMA modes
- * ASK@1998-10-28: v0.2 added support to set PIO modes
- * ASK@1998-10-27: v0.1 first version - chipset detection
- *
  */
 
 #include <linux/module.h>
-- 
cgit v1.2.3-59-g8ed1b


From fb7b0d5b4096ec2a0f76538a4461345af14e0781 Mon Sep 17 00:00:00 2001
From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Date: Mon, 18 Jan 2010 07:19:06 +0000
Subject: opti621: remove stale driver history

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/ide/opti621.c | 71 ---------------------------------------------------
 1 file changed, 71 deletions(-)

(limited to 'drivers')

diff --git a/drivers/ide/opti621.c b/drivers/ide/opti621.c
index f1d70d6630fe..2052788fab7a 100644
--- a/drivers/ide/opti621.c
+++ b/drivers/ide/opti621.c
@@ -8,77 +8,6 @@
  * Jan Harkes <jaharkes@cwi.nl>,
  * Mark Lord <mlord@pobox.com>
  * Some parts of code are from ali14xx.c and from rz1000.c.
- *
- * OPTi is trademark of OPTi, Octek is trademark of Octek.
- *
- * I used docs from OPTi databook, from ftp.opti.com, file 9123-0002.ps
- * and disassembled/traced setupvic.exe (DOS program).
- * It increases kernel code about 2 kB.
- * I don't have this card no more, but I hope I can get some in case
- * of needed development.
- * My card is Octek PIDE 1.01 (on card) or OPTiViC (program).
- * It has a place for a secondary connector in circuit, but nothing
- * is there. Also BIOS says no address for
- * secondary controller (see bellow in ide_init_opti621).
- * I've only tested this on my system, which only has one disk.
- * It's Western Digital WDAC2850, with PIO mode 3. The PCI bus
- * is at 20 MHz (I have DX2/80, I tried PCI at 40, but I got random
- * lockups). I tried the OCTEK double speed CD-ROM and
- * it does not work! But I can't boot DOS also, so it's probably
- * hardware fault. I have connected Conner 80MB, the Seagate 850MB (no
- * problems) and Seagate 1GB (as slave, WD as master). My experiences
- * with the third, 1GB drive: I got 3MB/s (hdparm), but sometimes
- * it slows to about 100kB/s! I don't know why and I have
- * not this drive now, so I can't try it again.
- * I write this driver because I lost the paper ("manual") with
- * settings of jumpers on the card and I have to boot Linux with
- * Loadlin except LILO, cause I have to run the setupvic.exe program
- * already or I get disk errors (my test: rpm -Vf
- * /usr/X11R6/bin/XF86_SVGA - or any big file).
- * Some numbers from hdparm -t /dev/hda:
- * Timing buffer-cache reads:   32 MB in  3.02 seconds =10.60 MB/sec
- * Timing buffered disk reads:  16 MB in  5.52 seconds = 2.90 MB/sec
- * I have 4 Megs/s before, but I don't know why (maybe changes
- * in hdparm test).
- * After release of 0.1, I got some successful reports, so it might work.
- *
- * The main problem with OPTi is that some timings for master
- * and slave must be the same. For example, if you have master
- * PIO 3 and slave PIO 0, driver have to set some timings of
- * master for PIO 0. Second problem is that opti621_set_pio_mode
- * got only one drive to set, but have to set both drives.
- * This is solved in compute_pios. If you don't set
- * the second drive, compute_pios use ide_get_best_pio_mode
- * for autoselect mode (you can change it to PIO 0, if you want).
- * If you then set the second drive to another PIO, the old value
- * (automatically selected) will be overrided by yours.
- * There is a 25/33MHz switch in configuration
- * register, but driver is written for use at any frequency.
- *
- * Version 0.1, Nov 8, 1996
- * by Jaromir Koutek, for 2.1.8.
- * Initial version of driver.
- *
- * Version 0.2
- * Number 0.2 skipped.
- *
- * Version 0.3, Nov 29, 1997
- * by Mark Lord (probably), for 2.1.68
- * Updates for use with new IDE block driver.
- *
- * Version 0.4, Dec 14, 1997
- * by Jan Harkes
- * Fixed some errors and cleaned the code.
- *
- * Version 0.5, Jan 2, 1998
- * by Jaromir Koutek
- * Updates for use with (again) new IDE block driver.
- * Update of documentation.
- *
- * Version 0.6, Jan 2, 1999
- * by Jaromir Koutek
- * Reversed to version 0.3 of the driver, because
- * 0.5 doesn't work.
  */
 
 #include <linux/types.h>
-- 
cgit v1.2.3-59-g8ed1b


From a337c2272731d538827153b32f547ef7c131a4cb Mon Sep 17 00:00:00 2001
From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Date: Mon, 18 Jan 2010 07:19:14 +0000
Subject: pdc202xx_old: add ->init_hwif method

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/ide/pdc202xx_old.c | 18 ++++++++----------
 1 file changed, 8 insertions(+), 10 deletions(-)

(limited to 'drivers')

diff --git a/drivers/ide/pdc202xx_old.c b/drivers/ide/pdc202xx_old.c
index 35161dd840a0..1d20594ee420 100644
--- a/drivers/ide/pdc202xx_old.c
+++ b/drivers/ide/pdc202xx_old.c
@@ -1,7 +1,7 @@
 /*
  *  Copyright (C) 1998-2002		Andre Hedrick <andre@linux-ide.org>
  *  Copyright (C) 2006-2007, 2009	MontaVista Software, Inc.
- *  Copyright (C) 2007			Bartlomiej Zolnierkiewicz
+ *  Copyright (C) 2007-2010		Bartlomiej Zolnierkiewicz
  *
  *  Portions Copyright (C) 1999 Promise Technology, Inc.
  *  Author: Frank Tiernan (frankt@promise.com)
@@ -21,8 +21,6 @@
 
 #define DRV_NAME "pdc202xx_old"
 
-static void pdc_old_disable_66MHz_clock(ide_hwif_t *);
-
 static void pdc202xx_set_mode(ide_drive_t *drive, const u8 speed)
 {
 	ide_hwif_t *hwif	= drive->hwif;
@@ -32,12 +30,6 @@ static void pdc202xx_set_mode(ide_drive_t *drive, const u8 speed)
 	u8			AP = 0, BP = 0, CP = 0;
 	u8			TA = 0, TB = 0, TC = 0;
 
-	/*
-	 * TODO: do this once per channel
-	 */
-	if (dev->device != PCI_DEVICE_ID_PROMISE_20246)
-		pdc_old_disable_66MHz_clock(hwif);
-
 	pci_read_config_byte(dev, drive_pci,     &AP);
 	pci_read_config_byte(dev, drive_pci + 1, &BP);
 	pci_read_config_byte(dev, drive_pci + 2, &CP);
@@ -145,6 +137,11 @@ static void pdc_old_disable_66MHz_clock(ide_hwif_t *hwif)
 	outb(clock & ~(hwif->channel ? 0x08 : 0x02), clock_reg);
 }
 
+static void pdc2026x_init_hwif(ide_hwif_t *hwif)
+{
+	pdc_old_disable_66MHz_clock(hwif);
+}
+
 static void pdc202xx_dma_start(ide_drive_t *drive)
 {
 	if (drive->current_speed > XFER_UDMA_2)
@@ -261,6 +258,7 @@ static const struct ide_dma_ops pdc2026x_dma_ops = {
 	{ \
 		.name		= DRV_NAME, \
 		.init_chipset	= init_chipset_pdc202xx, \
+		.init_hwif	= pdc2026x_init_hwif, \
 		.port_ops	= &pdc2026x_port_ops, \
 		.dma_ops	= &pdc2026x_dma_ops, \
 		.host_flags	= IDE_HFLAGS_PDC202XX, \
@@ -356,6 +354,6 @@ static void __exit pdc202xx_ide_exit(void)
 module_init(pdc202xx_ide_init);
 module_exit(pdc202xx_ide_exit);
 
-MODULE_AUTHOR("Andre Hedrick, Frank Tiernan");
+MODULE_AUTHOR("Andre Hedrick, Frank Tiernan, Bartlomiej Zolnierkiewicz");
 MODULE_DESCRIPTION("PCI driver module for older Promise IDE");
 MODULE_LICENSE("GPL");
-- 
cgit v1.2.3-59-g8ed1b


From e7593af6e5c24e323217c12d011ad7e43742ca6f Mon Sep 17 00:00:00 2001
From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Date: Mon, 18 Jan 2010 07:19:22 +0000
Subject: serverworks: cleanup svwks_udma_filter()

* remove dead OSB4 UDMA support
* remove unreachable code
* make isa_dev local to ->init_chipset

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/ide/serverworks.c | 40 +++++++++++-----------------------------
 1 file changed, 11 insertions(+), 29 deletions(-)

(limited to 'drivers')

diff --git a/drivers/ide/serverworks.c b/drivers/ide/serverworks.c
index b6554ef92716..1777c919237e 100644
--- a/drivers/ide/serverworks.c
+++ b/drivers/ide/serverworks.c
@@ -2,7 +2,7 @@
  * Copyright (C) 1998-2000 Michel Aubry
  * Copyright (C) 1998-2000 Andrzej Krzysztofowicz
  * Copyright (C) 1998-2000 Andre Hedrick <andre@linux-ide.org>
- * Copyright (C)      2007 Bartlomiej Zolnierkiewicz
+ * Copyright (C) 2007-2010 Bartlomiej Zolnierkiewicz
  * Portions copyright (c) 2001 Sun Microsystems
  *
  *
@@ -52,8 +52,6 @@ static const char *svwks_bad_ata100[] = {
 	NULL
 };
 
-static struct pci_dev *isa_dev;
-
 static int check_in_drive_lists (ide_drive_t *drive, const char **list)
 {
 	char *m = (char *)&drive->id[ATA_ID_PROD];
@@ -67,26 +65,14 @@ static int check_in_drive_lists (ide_drive_t *drive, const char **list)
 static u8 svwks_udma_filter(ide_drive_t *drive)
 {
 	struct pci_dev *dev = to_pci_dev(drive->hwif->dev);
-	u8 mask = 0;
 
-	if (dev->device == PCI_DEVICE_ID_SERVERWORKS_HT1000IDE)
+	if (dev->device == PCI_DEVICE_ID_SERVERWORKS_HT1000IDE) {
 		return 0x1f;
-	if (dev->device == PCI_DEVICE_ID_SERVERWORKS_OSB4IDE) {
-		u32 reg = 0;
-		if (isa_dev)
-			pci_read_config_dword(isa_dev, 0x64, &reg);
-			
-		/*
-		 *	Don't enable UDMA on disk devices for the moment
-		 */
-		if(drive->media == ide_disk)
-			return 0;
-		/* Check the OSB4 DMA33 enable bit */
-		return ((reg & 0x00004000) == 0x00004000) ? 0x07 : 0;
 	} else if (dev->revision < SVWKS_CSB5_REVISION_NEW) {
 		return 0x07;
-	} else if (dev->revision >= SVWKS_CSB5_REVISION_NEW) {
-		u8 btr = 0, mode;
+	} else {
+		u8 btr = 0, mode, mask;
+
 		pci_read_config_byte(dev, 0x5A, &btr);
 		mode = btr & 0x3;
 
@@ -101,13 +87,9 @@ static u8 svwks_udma_filter(ide_drive_t *drive)
 		case 1:	 mask = 0x07; break;
 		default: mask = 0x00; break;
 		}
-	}
-	if (((dev->device == PCI_DEVICE_ID_SERVERWORKS_CSB6IDE) ||
-	     (dev->device == PCI_DEVICE_ID_SERVERWORKS_CSB6IDE2)) &&
-	    (!(PCI_FUNC(dev->devfn) & 1)))
-		mask = 0x1f;
 
-	return mask;
+		return mask;
+	}
 }
 
 static u8 svwks_csb_check (struct pci_dev *dev)
@@ -185,8 +167,9 @@ static int init_chipset_svwks(struct pci_dev *dev)
 
 	/* OSB4 : South Bridge and IDE */
 	if (dev->device == PCI_DEVICE_ID_SERVERWORKS_OSB4IDE) {
-		isa_dev = pci_get_device(PCI_VENDOR_ID_SERVERWORKS,
-			  PCI_DEVICE_ID_SERVERWORKS_OSB4, NULL);
+		struct pci_dev *isa_dev =
+			pci_get_device(PCI_VENDOR_ID_SERVERWORKS,
+					PCI_DEVICE_ID_SERVERWORKS_OSB4, NULL);
 		if (isa_dev) {
 			pci_read_config_dword(isa_dev, 0x64, &reg);
 			reg &= ~0x00002000; /* disable 600ns interrupt mask */
@@ -343,7 +326,6 @@ static u8 svwks_cable_detect(ide_hwif_t *hwif)
 static const struct ide_port_ops osb4_port_ops = {
 	.set_pio_mode		= svwks_set_pio_mode,
 	.set_dma_mode		= svwks_set_dma_mode,
-	.udma_filter		= svwks_udma_filter,
 };
 
 static const struct ide_port_ops svwks_port_ops = {
@@ -460,6 +442,6 @@ static void __exit svwks_ide_exit(void)
 module_init(svwks_ide_init);
 module_exit(svwks_ide_exit);
 
-MODULE_AUTHOR("Michael Aubry. Andrzej Krzysztofowicz, Andre Hedrick");
+MODULE_AUTHOR("Michael Aubry. Andrzej Krzysztofowicz, Andre Hedrick, Bartlomiej Zolnierkiewicz");
 MODULE_DESCRIPTION("PCI driver module for Serverworks OSB4/CSB5/CSB6 IDE");
 MODULE_LICENSE("GPL");
-- 
cgit v1.2.3-59-g8ed1b


From cb06fc3f4c25d33c188d77e3f7e46112e7d71f38 Mon Sep 17 00:00:00 2001
From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Date: Mon, 18 Jan 2010 07:19:30 +0000
Subject: serverworks: add missing pci_dev_put() call

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/ide/serverworks.c | 1 +
 1 file changed, 1 insertion(+)

(limited to 'drivers')

diff --git a/drivers/ide/serverworks.c b/drivers/ide/serverworks.c
index 1777c919237e..657f0433ec50 100644
--- a/drivers/ide/serverworks.c
+++ b/drivers/ide/serverworks.c
@@ -178,6 +178,7 @@ static int init_chipset_svwks(struct pci_dev *dev)
 					"enabled.\n", pci_name(dev));
 			reg |=  0x00004000; /* enable UDMA/33 support */
 			pci_write_config_dword(isa_dev, 0x64, reg);
+			pci_dev_put(isa_dev);
 		}
 	}
 
-- 
cgit v1.2.3-59-g8ed1b


From 42036c85a68c82389f011eceab594c64956d0c2d Mon Sep 17 00:00:00 2001
From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Date: Mon, 18 Jan 2010 07:19:37 +0000
Subject: via82cxxx: vx855 is a single channel controller

Based on commit e4d866c for pata_via host driver
(PCI ID was later changed by commit 5993856).

Update my credits while at it.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/ide/via82cxxx.c | 19 +++++++++++++------
 1 file changed, 13 insertions(+), 6 deletions(-)

(limited to 'drivers')

diff --git a/drivers/ide/via82cxxx.c b/drivers/ide/via82cxxx.c
index 028de26a25fe..29f3be311f8d 100644
--- a/drivers/ide/via82cxxx.c
+++ b/drivers/ide/via82cxxx.c
@@ -6,7 +6,7 @@
  *   vt8235, vt8237, vt8237a
  *
  * Copyright (c) 2000-2002 Vojtech Pavlik
- * Copyright (c) 2007 Bartlomiej Zolnierkiewicz
+ * Copyright (c) 2007-2010 Bartlomiej Zolnierkiewicz
  *
  * Based on the work of:
  *	Michel Aubry
@@ -55,6 +55,10 @@
 #define VIA_BAD_ID		0x10 /* Has wrong vendor ID (0x1107) */
 #define VIA_BAD_AST		0x20 /* Don't touch Address Setup Timing */
 
+enum {
+	VIA_IDFLAG_SINGLE = (1 << 1), /* single channel controller */
+};
+
 /*
  * VIA SouthBridge chips.
  */
@@ -436,10 +440,13 @@ static int __devinit via_init_one(struct pci_dev *dev, const struct pci_device_i
 		via_clock = 33333;
 	}
 
-	if (idx == 0)
-		d.host_flags |= IDE_HFLAG_NO_AUTODMA;
-	else
+	if (idx == 1)
 		d.enablebits[1].reg = d.enablebits[0].reg = 0;
+	else
+		d.host_flags |= IDE_HFLAG_NO_AUTODMA;
+
+	if (idx == VIA_IDFLAG_SINGLE)
+		d.host_flags |= IDE_HFLAG_SINGLE;
 
 	if ((via_config->flags & VIA_NO_UNMASK) == 0)
 		d.host_flags |= IDE_HFLAG_UNMASK_IRQS;
@@ -475,7 +482,7 @@ static const struct pci_device_id via_pci_tbl[] = {
 	{ PCI_VDEVICE(VIA, PCI_DEVICE_ID_VIA_82C576_1),  0 },
 	{ PCI_VDEVICE(VIA, PCI_DEVICE_ID_VIA_82C586_1),  0 },
 	{ PCI_VDEVICE(VIA, PCI_DEVICE_ID_VIA_CX700_IDE), 0 },
-	{ PCI_VDEVICE(VIA, PCI_DEVICE_ID_VIA_VX855_IDE), 0 },
+	{ PCI_VDEVICE(VIA, PCI_DEVICE_ID_VIA_VX855_IDE), VIA_IDFLAG_SINGLE },
 	{ PCI_VDEVICE(VIA, PCI_DEVICE_ID_VIA_6410),      1 },
 	{ PCI_VDEVICE(VIA, PCI_DEVICE_ID_VIA_SATA_EIDE), 1 },
 	{ 0, },
@@ -504,6 +511,6 @@ static void __exit via_ide_exit(void)
 module_init(via_ide_init);
 module_exit(via_ide_exit);
 
-MODULE_AUTHOR("Vojtech Pavlik, Michel Aubry, Jeff Garzik, Andre Hedrick");
+MODULE_AUTHOR("Vojtech Pavlik, Bartlomiej Zolnierkiewicz, Michel Aubry, Jeff Garzik, Andre Hedrick");
 MODULE_DESCRIPTION("PCI driver module for VIA IDE");
 MODULE_LICENSE("GPL");
-- 
cgit v1.2.3-59-g8ed1b


From 76937fa765bd65c052b87812e46d5b90094e57b8 Mon Sep 17 00:00:00 2001
From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Date: Mon, 18 Jan 2010 07:19:44 +0000
Subject: ide: add SATA cable detection support

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/ide/ide-iops.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers')

diff --git a/drivers/ide/ide-iops.c b/drivers/ide/ide-iops.c
index 222c1ef65fb9..376f2dc410c5 100644
--- a/drivers/ide/ide-iops.c
+++ b/drivers/ide/ide-iops.c
@@ -231,7 +231,7 @@ u8 eighty_ninty_three(ide_drive_t *drive)
 	u16 *id = drive->id;
 	int ivb = ide_in_drive_list(id, ivb_list);
 
-	if (hwif->cbl == ATA_CBL_PATA40_SHORT)
+	if (hwif->cbl == ATA_CBL_SATA || hwif->cbl == ATA_CBL_PATA40_SHORT)
 		return 1;
 
 	if (ivb)
-- 
cgit v1.2.3-59-g8ed1b


From a13e4865fac374f2edf2666b66f2f88e527db2b7 Mon Sep 17 00:00:00 2001
From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Date: Mon, 18 Jan 2010 07:19:53 +0000
Subject: via82cxxx: fix SATA cable detection

Add VIA_SATA_PATA flag for cx700, vx800 and vx855 chipsets
(the first port is SATA).

Based on commits 7585eb1, bfce5e0 and e4d866c for pata_via
host driver.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/ide/via82cxxx.c | 10 +++++++---
 1 file changed, 7 insertions(+), 3 deletions(-)

(limited to 'drivers')

diff --git a/drivers/ide/via82cxxx.c b/drivers/ide/via82cxxx.c
index 29f3be311f8d..11b3e711451a 100644
--- a/drivers/ide/via82cxxx.c
+++ b/drivers/ide/via82cxxx.c
@@ -54,6 +54,7 @@
 #define VIA_NO_UNMASK		0x08 /* Doesn't work with IRQ unmasking on */
 #define VIA_BAD_ID		0x10 /* Has wrong vendor ID (0x1107) */
 #define VIA_BAD_AST		0x20 /* Don't touch Address Setup Timing */
+#define VIA_SATA_PATA		0x80 /* SATA/PATA combined configuration */
 
 enum {
 	VIA_IDFLAG_SINGLE = (1 << 1), /* single channel controller */
@@ -71,9 +72,9 @@ static struct via_isa_bridge {
 	u8 udma_mask;
 	u8 flags;
 } via_isa_bridges[] = {
-	{ "vx855",	PCI_DEVICE_ID_VIA_VX855,    0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST },
-	{ "vx800",	PCI_DEVICE_ID_VIA_VX800,    0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST },
-	{ "cx700",	PCI_DEVICE_ID_VIA_CX700,    0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST },
+	{ "vx855",	PCI_DEVICE_ID_VIA_VX855,    0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST | VIA_SATA_PATA },
+	{ "vx800",	PCI_DEVICE_ID_VIA_VX800,    0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST | VIA_SATA_PATA },
+	{ "cx700",	PCI_DEVICE_ID_VIA_CX700,    0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST | VIA_SATA_PATA },
 	{ "vt8237s",	PCI_DEVICE_ID_VIA_8237S,    0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST },
 	{ "vt6410",	PCI_DEVICE_ID_VIA_6410,     0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST },
 	{ "vt8251",	PCI_DEVICE_ID_VIA_8251,     0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST },
@@ -366,6 +367,9 @@ static u8 via82cxxx_cable_detect(ide_hwif_t *hwif)
 	if (via_cable_override(pdev))
 		return ATA_CBL_PATA40_SHORT;
 
+	if ((vdev->via_config->flags & VIA_SATA_PATA) && hwif->channel == 0)
+		return ATA_CBL_SATA;
+
 	if ((vdev->via_80w >> hwif->channel) & 1)
 		return ATA_CBL_PATA80;
 	else
-- 
cgit v1.2.3-59-g8ed1b


From f931a5d5785d7b7c44871bd7ad2762e29dfddf29 Mon Sep 17 00:00:00 2001
From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Date: Mon, 18 Jan 2010 07:20:00 +0000
Subject: via82cxxx: workaround h/w bugs

Add custom struct ide_tp_ops instance to fix the internal bug of some VIA
chipsets which will reset the device register after changing the nIEN bit
in the device control register.

Based on commit bfce5e0 for pata_via host driver.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/ide/via82cxxx.c | 57 +++++++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 57 insertions(+)

(limited to 'drivers')

diff --git a/drivers/ide/via82cxxx.c b/drivers/ide/via82cxxx.c
index 11b3e711451a..46e8ddbdf031 100644
--- a/drivers/ide/via82cxxx.c
+++ b/drivers/ide/via82cxxx.c
@@ -107,6 +107,7 @@ struct via82cxxx_dev
 {
 	struct via_isa_bridge *via_config;
 	unsigned int via_80w;
+	u8 cached_device[2];
 };
 
 /**
@@ -382,10 +383,66 @@ static const struct ide_port_ops via_port_ops = {
 	.cable_detect		= via82cxxx_cable_detect,
 };
 
+static void via_write_devctl(ide_hwif_t *hwif, u8 ctl)
+{
+	struct via82cxxx_dev *vdev = hwif->host->host_priv;
+
+	outb(ctl, hwif->io_ports.ctl_addr);
+	outb(vdev->cached_device[hwif->channel], hwif->io_ports.device_addr);
+}
+
+static void __via_dev_select(ide_drive_t *drive, u8 select)
+{
+	ide_hwif_t *hwif = drive->hwif;
+	struct via82cxxx_dev *vdev = hwif->host->host_priv;
+
+	outb(select, hwif->io_ports.device_addr);
+	vdev->cached_device[hwif->channel] = select;
+}
+
+static void via_dev_select(ide_drive_t *drive)
+{
+	__via_dev_select(drive, drive->select | ATA_DEVICE_OBS);
+}
+
+static void via_tf_load(ide_drive_t *drive, struct ide_taskfile *tf, u8 valid)
+{
+	ide_hwif_t *hwif = drive->hwif;
+	struct ide_io_ports *io_ports = &hwif->io_ports;
+
+	if (valid & IDE_VALID_FEATURE)
+		outb(tf->feature, io_ports->feature_addr);
+	if (valid & IDE_VALID_NSECT)
+		outb(tf->nsect, io_ports->nsect_addr);
+	if (valid & IDE_VALID_LBAL)
+		outb(tf->lbal, io_ports->lbal_addr);
+	if (valid & IDE_VALID_LBAM)
+		outb(tf->lbam, io_ports->lbam_addr);
+	if (valid & IDE_VALID_LBAH)
+		outb(tf->lbah, io_ports->lbah_addr);
+	if (valid & IDE_VALID_DEVICE)
+		__via_dev_select(drive, tf->device);
+}
+
+const struct ide_tp_ops via_tp_ops = {
+	.exec_command		= ide_exec_command,
+	.read_status		= ide_read_status,
+	.read_altstatus		= ide_read_altstatus,
+	.write_devctl		= via_write_devctl,
+
+	.dev_select		= via_dev_select,
+	.tf_load		= via_tf_load,
+	.tf_read		= ide_tf_read,
+
+	.input_data		= ide_input_data,
+	.output_data		= ide_output_data,
+};
+
 static const struct ide_port_info via82cxxx_chipset __devinitdata = {
 	.name		= DRV_NAME,
 	.init_chipset	= init_chipset_via82cxxx,
 	.enablebits	= { { 0x40, 0x02, 0x02 }, { 0x40, 0x01, 0x01 } },
+	.tp_ops		= &via_tp_ops,
 	.port_ops	= &via_port_ops,
 	.host_flags	= IDE_HFLAG_PIO_NO_BLACKLIST |
 			  IDE_HFLAG_POST_SET_MODE |
-- 
cgit v1.2.3-59-g8ed1b


From 5b6c82ea0fd130a9f0bb7f4d86f6dbbf2fdaaa04 Mon Sep 17 00:00:00 2001
From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Date: Mon, 18 Jan 2010 07:20:07 +0000
Subject: via82cxxx: add support for vt8261 and future chips

Based on commit e4d866c for pata_via host driver.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/ide/via82cxxx.c | 10 ++++------
 1 file changed, 4 insertions(+), 6 deletions(-)

(limited to 'drivers')

diff --git a/drivers/ide/via82cxxx.c b/drivers/ide/via82cxxx.c
index 46e8ddbdf031..1a3214389ffb 100644
--- a/drivers/ide/via82cxxx.c
+++ b/drivers/ide/via82cxxx.c
@@ -75,6 +75,7 @@ static struct via_isa_bridge {
 	{ "vx855",	PCI_DEVICE_ID_VIA_VX855,    0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST | VIA_SATA_PATA },
 	{ "vx800",	PCI_DEVICE_ID_VIA_VX800,    0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST | VIA_SATA_PATA },
 	{ "cx700",	PCI_DEVICE_ID_VIA_CX700,    0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST | VIA_SATA_PATA },
+	{ "vt8261",	PCI_DEVICE_ID_VIA_8261,     0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST },
 	{ "vt8237s",	PCI_DEVICE_ID_VIA_8237S,    0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST },
 	{ "vt6410",	PCI_DEVICE_ID_VIA_6410,     0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST },
 	{ "vt8251",	PCI_DEVICE_ID_VIA_8251,     0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST },
@@ -97,6 +98,7 @@ static struct via_isa_bridge {
 	{ "vt82c586",	PCI_DEVICE_ID_VIA_82C586_0, 0x00, 0x0f,      0x00, VIA_SET_FIFO },
 	{ "vt82c576",	PCI_DEVICE_ID_VIA_82C576,   0x00, 0x2f,      0x00, VIA_SET_FIFO | VIA_NO_UNMASK },
 	{ "vt82c576",	PCI_DEVICE_ID_VIA_82C576,   0x00, 0x2f,      0x00, VIA_SET_FIFO | VIA_NO_UNMASK | VIA_BAD_ID },
+	{ "vtxxxx",	PCI_DEVICE_ID_VIA_ANON,     0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST },
 	{ NULL }
 };
 
@@ -205,7 +207,8 @@ static struct via_isa_bridge *via_config_find(struct pci_dev **isa)
 {
 	struct via_isa_bridge *via_config;
 
-	for (via_config = via_isa_bridges; via_config->id; via_config++)
+	for (via_config = via_isa_bridges;
+	     via_config->id != PCI_DEVICE_ID_VIA_ANON; via_config++)
 		if ((*isa = pci_get_device(PCI_VENDOR_ID_VIA +
 			!!(via_config->flags & VIA_BAD_ID),
 			via_config->id, NULL))) {
@@ -467,11 +470,6 @@ static int __devinit via_init_one(struct pci_dev *dev, const struct pci_device_i
 	 * Find the ISA bridge and check we know what it is.
 	 */
 	via_config = via_config_find(&isa);
-	if (!via_config->id) {
-		printk(KERN_WARNING DRV_NAME " %s: unknown chipset, skipping\n",
-			pci_name(dev));
-		return -ENODEV;
-	}
 
 	/*
 	 * Print the boot message.
-- 
cgit v1.2.3-59-g8ed1b


From a354ae8747d0687093ce244e76b15b6174d2f098 Mon Sep 17 00:00:00 2001
From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Date: Mon, 18 Jan 2010 07:20:14 +0000
Subject: via82cxxx: add support for VT6415 PCIE PATA IDE Host Controller

Based on commits 5955c7a and 7d948b1 for pata_via host driver.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/ide/via82cxxx.c | 2 ++
 1 file changed, 2 insertions(+)

(limited to 'drivers')

diff --git a/drivers/ide/via82cxxx.c b/drivers/ide/via82cxxx.c
index 1a3214389ffb..3db35b0142dc 100644
--- a/drivers/ide/via82cxxx.c
+++ b/drivers/ide/via82cxxx.c
@@ -78,6 +78,7 @@ static struct via_isa_bridge {
 	{ "vt8261",	PCI_DEVICE_ID_VIA_8261,     0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST },
 	{ "vt8237s",	PCI_DEVICE_ID_VIA_8237S,    0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST },
 	{ "vt6410",	PCI_DEVICE_ID_VIA_6410,     0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST },
+	{ "vt6415",	PCI_DEVICE_ID_VIA_6410,     0x00, 0xff, ATA_UDMA6, VIA_BAD_AST },
 	{ "vt8251",	PCI_DEVICE_ID_VIA_8251,     0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST },
 	{ "vt8237",	PCI_DEVICE_ID_VIA_8237,     0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST },
 	{ "vt8237a",	PCI_DEVICE_ID_VIA_8237A,    0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST },
@@ -543,6 +544,7 @@ static const struct pci_device_id via_pci_tbl[] = {
 	{ PCI_VDEVICE(VIA, PCI_DEVICE_ID_VIA_CX700_IDE), 0 },
 	{ PCI_VDEVICE(VIA, PCI_DEVICE_ID_VIA_VX855_IDE), VIA_IDFLAG_SINGLE },
 	{ PCI_VDEVICE(VIA, PCI_DEVICE_ID_VIA_6410),      1 },
+	{ PCI_VDEVICE(VIA, PCI_DEVICE_ID_VIA_6415),      1 },
 	{ PCI_VDEVICE(VIA, PCI_DEVICE_ID_VIA_SATA_EIDE), 1 },
 	{ 0, },
 };
-- 
cgit v1.2.3-59-g8ed1b


From 68d0a036162f12d8be07c9fc140507cc1c8c6120 Mon Sep 17 00:00:00 2001
From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Date: Mon, 18 Jan 2010 07:20:21 +0000
Subject: via82cxxx: fix UDMA settings programming

* preserve 80-wire cable detection bit
* don't clear UDMA settings when programming PIO/MWDMA modes

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/ide/via82cxxx.c | 19 +++++++++++++++++--
 1 file changed, 17 insertions(+), 2 deletions(-)

(limited to 'drivers')

diff --git a/drivers/ide/via82cxxx.c b/drivers/ide/via82cxxx.c
index 3db35b0142dc..fbecf8ea8207 100644
--- a/drivers/ide/via82cxxx.c
+++ b/drivers/ide/via82cxxx.c
@@ -146,10 +146,25 @@ static void via_set_speed(ide_hwif_t *hwif, u8 dn, struct ide_timing *timing)
 	case ATA_UDMA4: t = timing->udma ? (0xe8 | (clamp_val(timing->udma, 2, 9) - 2)) : 0x0f; break;
 	case ATA_UDMA5: t = timing->udma ? (0xe0 | (clamp_val(timing->udma, 2, 9) - 2)) : 0x07; break;
 	case ATA_UDMA6: t = timing->udma ? (0xe0 | (clamp_val(timing->udma, 2, 9) - 2)) : 0x07; break;
-	default: return;
 	}
 
-	pci_write_config_byte(dev, VIA_UDMA_TIMING + (3 - dn), t);
+	/* Set UDMA unless device is not UDMA capable */
+	if (vdev->via_config->udma_mask) {
+		u8 udma_etc;
+
+		pci_read_config_byte(dev, VIA_UDMA_TIMING + 3 - dn, &udma_etc);
+
+		/* clear transfer mode bit */
+		udma_etc &= ~0x20;
+
+		if (timing->udma) {
+			/* preserve 80-wire cable detection bit */
+			udma_etc &= 0x10;
+			udma_etc |= t;
+		}
+
+		pci_write_config_byte(dev, VIA_UDMA_TIMING + 3 - dn, udma_etc);
+	}
 }
 
 /**
-- 
cgit v1.2.3-59-g8ed1b


From d2d4e780aff2fab46a792ebc89f80d1a6872b325 Mon Sep 17 00:00:00 2001
From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Date: Mon, 18 Jan 2010 07:20:28 +0000
Subject: ide: add drive->pio_mode field

Add pio_mode field to ide_drive_t matching pio_mode field used in
struct ata_device.

The validity of the field is restricted to ->set_pio_mode method
only currently in IDE subsystem.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/ide/ide-devsets.c   | 2 ++
 drivers/ide/ide-probe.c     | 2 ++
 drivers/ide/ide-xfer-mode.c | 3 +++
 include/linux/ide.h         | 1 +
 4 files changed, 8 insertions(+)

(limited to 'drivers')

diff --git a/drivers/ide/ide-devsets.c b/drivers/ide/ide-devsets.c
index 1099bf7cf968..cb3341ce655c 100644
--- a/drivers/ide/ide-devsets.c
+++ b/drivers/ide/ide-devsets.c
@@ -105,6 +105,8 @@ static int set_pio_mode(ide_drive_t *drive, int arg)
 		return -ENOSYS;
 
 	if (set_pio_mode_abuse(drive->hwif, arg)) {
+		drive->pio_mode = arg + XFER_PIO_0;
+
 		if (arg == 8 || arg == 9) {
 			unsigned long flags;
 
diff --git a/drivers/ide/ide-probe.c b/drivers/ide/ide-probe.c
index 4d76ba473097..9a9f10f4cf9f 100644
--- a/drivers/ide/ide-probe.c
+++ b/drivers/ide/ide-probe.c
@@ -1043,6 +1043,8 @@ static void ide_port_init_devices(ide_hwif_t *hwif)
 		if (hwif->host_flags & IDE_HFLAG_NO_UNMASK_IRQS)
 			drive->dev_flags |= IDE_DFLAG_NO_UNMASK;
 
+		drive->pio_mode = XFER_PIO_0;
+
 		if (port_ops && port_ops->init_dev)
 			port_ops->init_dev(drive);
 	}
diff --git a/drivers/ide/ide-xfer-mode.c b/drivers/ide/ide-xfer-mode.c
index 46d203ce60cc..cdae463f6b41 100644
--- a/drivers/ide/ide-xfer-mode.c
+++ b/drivers/ide/ide-xfer-mode.c
@@ -135,6 +135,7 @@ int ide_set_pio_mode(ide_drive_t *drive, const u8 mode)
 	 * set transfer mode on the device in ->set_pio_mode method...
 	 */
 	if (port_ops->set_dma_mode == NULL) {
+		drive->pio_mode = mode;
 		port_ops->set_pio_mode(drive, mode - XFER_PIO_0);
 		return 0;
 	}
@@ -142,9 +143,11 @@ int ide_set_pio_mode(ide_drive_t *drive, const u8 mode)
 	if (hwif->host_flags & IDE_HFLAG_POST_SET_MODE) {
 		if (ide_config_drive_speed(drive, mode))
 			return -1;
+		drive->pio_mode = mode;
 		port_ops->set_pio_mode(drive, mode - XFER_PIO_0);
 		return 0;
 	} else {
+		drive->pio_mode = mode;
 		port_ops->set_pio_mode(drive, mode - XFER_PIO_0);
 		return ide_config_drive_speed(drive, mode);
 	}
diff --git a/include/linux/ide.h b/include/linux/ide.h
index 0ec612959042..b5d2e9655059 100644
--- a/include/linux/ide.h
+++ b/include/linux/ide.h
@@ -515,6 +515,7 @@ struct ide_drive_s {
         u8	init_speed;	/* transfer rate set at boot */
         u8	current_speed;	/* current transfer rate set */
 	u8	desired_speed;	/* desired transfer rate set */
+	u8	pio_mode;	/* for ->set_pio_mode _only_ */
         u8	dn;		/* now wide spread use */
 	u8	acoustic;	/* acoustic management */
 	u8	media;		/* disk, cdrom, tape, floppy, ... */
-- 
cgit v1.2.3-59-g8ed1b


From 3fccaa192b9501e79a57e02e62b6bf420d2b461e Mon Sep 17 00:00:00 2001
From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Date: Mon, 18 Jan 2010 07:20:35 +0000
Subject: ide: add drive->dma_mode field

Add dma_mode field to ide_drive_t matching dma_mode field used in
struct ata_device.

The validity of the field is restricted to ->dma_pio_mode method
only currently in IDE subsystem.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/ide/aec62xx.c       | 1 +
 drivers/ide/ide-xfer-mode.c | 2 ++
 include/linux/ide.h         | 1 +
 3 files changed, 4 insertions(+)

(limited to 'drivers')

diff --git a/drivers/ide/aec62xx.c b/drivers/ide/aec62xx.c
index 878f8ec6dbe1..4c869872eb9a 100644
--- a/drivers/ide/aec62xx.c
+++ b/drivers/ide/aec62xx.c
@@ -136,6 +136,7 @@ static void aec6260_set_mode(ide_drive_t *drive, const u8 speed)
 
 static void aec_set_pio_mode(ide_drive_t *drive, const u8 pio)
 {
+	drive->dma_mode = pio + XFER_PIO_0;
 	drive->hwif->port_ops->set_dma_mode(drive, pio + XFER_PIO_0);
 }
 
diff --git a/drivers/ide/ide-xfer-mode.c b/drivers/ide/ide-xfer-mode.c
index cdae463f6b41..c2323869d92a 100644
--- a/drivers/ide/ide-xfer-mode.c
+++ b/drivers/ide/ide-xfer-mode.c
@@ -167,9 +167,11 @@ int ide_set_dma_mode(ide_drive_t *drive, const u8 mode)
 	if (hwif->host_flags & IDE_HFLAG_POST_SET_MODE) {
 		if (ide_config_drive_speed(drive, mode))
 			return -1;
+		drive->dma_mode = mode;
 		port_ops->set_dma_mode(drive, mode);
 		return 0;
 	} else {
+		drive->dma_mode = mode;
 		port_ops->set_dma_mode(drive, mode);
 		return ide_config_drive_speed(drive, mode);
 	}
diff --git a/include/linux/ide.h b/include/linux/ide.h
index b5d2e9655059..746ef9fdabcb 100644
--- a/include/linux/ide.h
+++ b/include/linux/ide.h
@@ -516,6 +516,7 @@ struct ide_drive_s {
         u8	current_speed;	/* current transfer rate set */
 	u8	desired_speed;	/* desired transfer rate set */
 	u8	pio_mode;	/* for ->set_pio_mode _only_ */
+	u8	dma_mode;	/* for ->dma_pio_mode _only_ */
         u8	dn;		/* now wide spread use */
 	u8	acoustic;	/* acoustic management */
 	u8	media;		/* disk, cdrom, tape, floppy, ... */
-- 
cgit v1.2.3-59-g8ed1b


From e085b3cae85af47eb0a3eda3186bd898310fb322 Mon Sep 17 00:00:00 2001
From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Date: Tue, 19 Jan 2010 01:44:41 -0800
Subject: ide: change ->set_pio_mode method parameters

Change ->set_pio_mode method parameters to match ->set_piomode method
used in struct ata_port_operations.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/ide/aec62xx.c       |  6 +++---
 drivers/ide/ali14xx.c       |  3 ++-
 drivers/ide/alim15x3.c      |  7 +++----
 drivers/ide/amd74xx.c       |  4 ++--
 drivers/ide/at91_ide.c      |  5 +++--
 drivers/ide/atiixp.c        |  7 ++++---
 drivers/ide/au1xxx-ide.c    |  5 ++---
 drivers/ide/cmd640.c        |  3 ++-
 drivers/ide/cmd64x.c        |  4 +++-
 drivers/ide/cs5520.c        |  7 ++++---
 drivers/ide/cs5530.c        |  7 ++++---
 drivers/ide/cs5535.c        |  6 +++---
 drivers/ide/cs5536.c        |  7 ++++---
 drivers/ide/cy82c693.c      |  5 ++---
 drivers/ide/dtc2278.c       |  4 ++--
 drivers/ide/hpt366.c        |  4 ++--
 drivers/ide/ht6560b.c       |  3 ++-
 drivers/ide/ide-devsets.c   |  4 ++--
 drivers/ide/ide-xfer-mode.c |  6 +++---
 drivers/ide/it8172.c        | 10 +++++-----
 drivers/ide/it8213.c        | 14 +++++++-------
 drivers/ide/it821x.c        |  6 +++---
 drivers/ide/jmicron.c       |  2 +-
 drivers/ide/opti621.c       |  6 +++---
 drivers/ide/palm_bk3710.c   |  5 +++--
 drivers/ide/pdc202xx_new.c  |  4 ++--
 drivers/ide/pdc202xx_old.c  |  4 ++--
 drivers/ide/piix.c          | 14 +++++++-------
 drivers/ide/pmac.c          |  5 ++---
 drivers/ide/qd65xx.c        | 10 ++++------
 drivers/ide/sc1200.c        |  4 ++--
 drivers/ide/scc_pata.c      |  6 +++---
 drivers/ide/serverworks.c   |  5 +++--
 drivers/ide/siimage.c       |  6 +++---
 drivers/ide/sis5513.c       |  4 ++--
 drivers/ide/sl82c105.c      |  5 +++--
 drivers/ide/slc90e66.c      | 13 +++++++------
 drivers/ide/tc86c001.c      |  4 ++--
 drivers/ide/triflex.c       |  4 ++--
 drivers/ide/tx4938ide.c     |  5 ++---
 drivers/ide/tx4939ide.c     |  4 ++--
 drivers/ide/umc8672.c       |  5 +++--
 drivers/ide/via82cxxx.c     |  6 +++---
 include/linux/ide.h         |  2 +-
 44 files changed, 129 insertions(+), 121 deletions(-)

(limited to 'drivers')

diff --git a/drivers/ide/aec62xx.c b/drivers/ide/aec62xx.c
index 4c869872eb9a..3790847361c3 100644
--- a/drivers/ide/aec62xx.c
+++ b/drivers/ide/aec62xx.c
@@ -134,10 +134,10 @@ static void aec6260_set_mode(ide_drive_t *drive, const u8 speed)
 	local_irq_restore(flags);
 }
 
-static void aec_set_pio_mode(ide_drive_t *drive, const u8 pio)
+static void aec_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive)
 {
-	drive->dma_mode = pio + XFER_PIO_0;
-	drive->hwif->port_ops->set_dma_mode(drive, pio + XFER_PIO_0);
+	drive->dma_mode = drive->pio_mode;
+	hwif->port_ops->set_dma_mode(drive, drive->dma_mode);
 }
 
 static int init_chipset_aec62xx(struct pci_dev *dev)
diff --git a/drivers/ide/ali14xx.c b/drivers/ide/ali14xx.c
index 90da1f953ed0..25b9fe3a9f8e 100644
--- a/drivers/ide/ali14xx.c
+++ b/drivers/ide/ali14xx.c
@@ -109,13 +109,14 @@ static DEFINE_SPINLOCK(ali14xx_lock);
  * This function computes timing parameters
  * and sets controller registers accordingly.
  */
-static void ali14xx_set_pio_mode(ide_drive_t *drive, const u8 pio)
+static void ali14xx_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive)
 {
 	int driveNum;
 	int time1, time2;
 	u8 param1, param2, param3, param4;
 	unsigned long flags;
 	int bus_speed = ide_vlb_clk ? ide_vlb_clk : 50;
+	const u8 pio = drive->pio_mode - XFER_PIO_0;
 	struct ide_timing *t = ide_timing_find_mode(XFER_PIO_0 + pio);
 
 	/* calculate timing, according to PIO mode */
diff --git a/drivers/ide/alim15x3.c b/drivers/ide/alim15x3.c
index 8f03cce055fa..28cee1055f76 100644
--- a/drivers/ide/alim15x3.c
+++ b/drivers/ide/alim15x3.c
@@ -63,15 +63,14 @@ static void ali_fifo_control(ide_hwif_t *hwif, ide_drive_t *drive, int on)
 
 /**
  *	ali_set_pio_mode	-	set host controller for PIO mode
+ *	@hwif: port
  *	@drive: drive
- *	@pio: PIO mode number
  *
  *	Program the controller for the given PIO mode.
  */
 
-static void ali_set_pio_mode(ide_drive_t *drive, const u8 pio)
+static void ali_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive)
 {
-	ide_hwif_t *hwif = drive->hwif;
 	struct pci_dev *dev = to_pci_dev(hwif->dev);
 	int bus_speed = ide_pci_clk ? ide_pci_clk : 33;
 	unsigned long T =  1000000 / bus_speed; /* PCI clock based */
@@ -79,7 +78,7 @@ static void ali_set_pio_mode(ide_drive_t *drive, const u8 pio)
 	u8 unit = drive->dn & 1;
 	struct ide_timing t;
 
-	ide_timing_compute(drive, XFER_PIO_0 + pio, &t, T, 1);
+	ide_timing_compute(drive, drive->pio_mode, &t, T, 1);
 
 	t.setup = clamp_val(t.setup, 1, 8) & 7;
 	t.active = clamp_val(t.active, 1, 8) & 7;
diff --git a/drivers/ide/amd74xx.c b/drivers/ide/amd74xx.c
index 108e9b676859..3eee7be7ca6f 100644
--- a/drivers/ide/amd74xx.c
+++ b/drivers/ide/amd74xx.c
@@ -108,9 +108,9 @@ static void amd_set_drive(ide_drive_t *drive, const u8 speed)
  * amd_set_pio_mode() is a callback from upper layers for PIO-only tuning.
  */
 
-static void amd_set_pio_mode(ide_drive_t *drive, const u8 pio)
+static void amd_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive)
 {
-	amd_set_drive(drive, XFER_PIO_0 + pio);
+	amd_set_drive(drive, drive->pio_mode);
 }
 
 static void amd7409_cable_detect(struct pci_dev *dev)
diff --git a/drivers/ide/at91_ide.c b/drivers/ide/at91_ide.c
index 248219a89a68..000a78e5246c 100644
--- a/drivers/ide/at91_ide.c
+++ b/drivers/ide/at91_ide.c
@@ -172,11 +172,12 @@ static void at91_ide_output_data(ide_drive_t *drive, struct ide_cmd *cmd,
 	leave_16bit(chipselect, mode);
 }
 
-static void at91_ide_set_pio_mode(ide_drive_t *drive, const u8 pio)
+static void at91_ide_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive)
 {
 	struct ide_timing *timing;
-	u8 chipselect = drive->hwif->select_data;
+	u8 chipselect = hwif->select_data;
 	int use_iordy = 0;
+	const u8 pio = drive->pio_mode - XFER_PIO_0;
 
 	pdbg("chipselect %u pio %u\n", chipselect, pio);
 
diff --git a/drivers/ide/atiixp.c b/drivers/ide/atiixp.c
index 837322b10a4c..b6848dfb93b0 100644
--- a/drivers/ide/atiixp.c
+++ b/drivers/ide/atiixp.c
@@ -42,19 +42,20 @@ static DEFINE_SPINLOCK(atiixp_lock);
 
 /**
  *	atiixp_set_pio_mode	-	set host controller for PIO mode
+ *	@hwif: port
  *	@drive: drive
- *	@pio: PIO mode number
  *
  *	Set the interface PIO mode.
  */
 
-static void atiixp_set_pio_mode(ide_drive_t *drive, const u8 pio)
+static void atiixp_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive)
 {
-	struct pci_dev *dev = to_pci_dev(drive->hwif->dev);
+	struct pci_dev *dev = to_pci_dev(hwif->dev);
 	unsigned long flags;
 	int timing_shift = (drive->dn ^ 1) * 8;
 	u32 pio_timing_data;
 	u16 pio_mode_data;
+	const u8 pio = drive->pio_mode - XFER_PIO_0;
 
 	spin_lock_irqsave(&atiixp_lock, flags);
 
diff --git a/drivers/ide/au1xxx-ide.c b/drivers/ide/au1xxx-ide.c
index 87cef0c440ad..c90e9b0a9f6e 100644
--- a/drivers/ide/au1xxx-ide.c
+++ b/drivers/ide/au1xxx-ide.c
@@ -99,12 +99,11 @@ static void au1xxx_output_data(ide_drive_t *drive, struct ide_cmd *cmd,
 }
 #endif
 
-static void au1xxx_set_pio_mode(ide_drive_t *drive, const u8 pio)
+static void au1xxx_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive)
 {
 	int mem_sttime = 0, mem_stcfg = au_readl(MEM_STCFG2);
 
-	/* set pio mode! */
-	switch(pio) {
+	switch (drive->pio_mode - XFER_PIO_0) {
 	case 0:
 		mem_sttime = SBC_IDE_TIMING(PIO0);
 
diff --git a/drivers/ide/cmd640.c b/drivers/ide/cmd640.c
index 1a32d62ed86b..c7d46a3d347a 100644
--- a/drivers/ide/cmd640.c
+++ b/drivers/ide/cmd640.c
@@ -572,9 +572,10 @@ static void cmd640_set_mode(ide_drive_t *drive, unsigned int index,
 	program_drive_counts(drive, index);
 }
 
-static void cmd640_set_pio_mode(ide_drive_t *drive, const u8 pio)
+static void cmd640_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive)
 {
 	unsigned int index = 0, cycle_time;
+	const u8 pio = drive->pio_mode - XFER_PIO_0;
 	u8 b;
 
 	switch (pio) {
diff --git a/drivers/ide/cmd64x.c b/drivers/ide/cmd64x.c
index 9f89f3116df0..0b11745937e7 100644
--- a/drivers/ide/cmd64x.c
+++ b/drivers/ide/cmd64x.c
@@ -127,8 +127,10 @@ static void cmd64x_program_timings(ide_drive_t *drive, u8 mode)
  * Special cases are 8: prefetch off, 9: prefetch on (both never worked)
  */
 
-static void cmd64x_set_pio_mode(ide_drive_t *drive, const u8 pio)
+static void cmd64x_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive)
 {
+	const u8 pio = drive->pio_mode - XFER_PIO_0;
+
 	/*
 	 * Filter out the prefetch control values
 	 * to prevent PIO5 from being programmed
diff --git a/drivers/ide/cs5520.c b/drivers/ide/cs5520.c
index 09f98ed0731f..b8094f049f3e 100644
--- a/drivers/ide/cs5520.c
+++ b/drivers/ide/cs5520.c
@@ -57,11 +57,11 @@ static struct pio_clocks cs5520_pio_clocks[]={
 	{1, 2, 1}
 };
 
-static void cs5520_set_pio_mode(ide_drive_t *drive, const u8 pio)
+static void cs5520_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive)
 {
-	ide_hwif_t *hwif = drive->hwif;
 	struct pci_dev *pdev = to_pci_dev(hwif->dev);
 	int controller = drive->dn > 1 ? 1 : 0;
+	const u8 pio = drive->pio_mode - XFER_PIO_0;
 
 	/* 8bit CAT/CRT - 8bit command timing for channel */
 	pci_write_config_byte(pdev, 0x62 + controller, 
@@ -85,7 +85,8 @@ static void cs5520_set_dma_mode(ide_drive_t *drive, const u8 speed)
 {
 	printk(KERN_ERR "cs55x0: bad ide timing.\n");
 
-	cs5520_set_pio_mode(drive, 0);
+	drive->pio_mode = XFER_PIO_0 + 0;
+	cs5520_set_pio_mode(drive->hwif, drive);
 }
 
 static const struct ide_port_ops cs5520_port_ops = {
diff --git a/drivers/ide/cs5530.c b/drivers/ide/cs5530.c
index 40bf05eddf6e..4ced40255ad6 100644
--- a/drivers/ide/cs5530.c
+++ b/drivers/ide/cs5530.c
@@ -41,8 +41,8 @@ static unsigned int cs5530_pio_timings[2][5] = {
 
 /**
  *	cs5530_set_pio_mode	-	set host controller for PIO mode
+ *	@hwif: port
  *	@drive: drive
- *	@pio: PIO mode number
  *
  *	Handles setting of PIO mode for the chipset.
  *
@@ -50,10 +50,11 @@ static unsigned int cs5530_pio_timings[2][5] = {
  *	will have valid default PIO timings set up before we get here.
  */
 
-static void cs5530_set_pio_mode(ide_drive_t *drive, const u8 pio)
+static void cs5530_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive)
 {
-	unsigned long basereg = CS5530_BASEREG(drive->hwif);
+	unsigned long basereg = CS5530_BASEREG(hwif);
 	unsigned int format = (inl(basereg + 4) >> 31) & 1;
+	const u8 pio = drive->pio_mode - XFER_PIO_0;
 
 	outl(cs5530_pio_timings[format][pio], basereg + ((drive->dn & 1)<<3));
 }
diff --git a/drivers/ide/cs5535.c b/drivers/ide/cs5535.c
index b883838adc24..7974415ea89f 100644
--- a/drivers/ide/cs5535.c
+++ b/drivers/ide/cs5535.c
@@ -142,15 +142,15 @@ static void cs5535_set_dma_mode(ide_drive_t *drive, const u8 speed)
 
 /**
  *	cs5535_set_pio_mode	-	set host controller for PIO mode
+ *	@hwif: port
  *	@drive: drive
- *	@pio: PIO mode number
  *
  *	A callback from the upper layers for PIO-only tuning.
  */
 
-static void cs5535_set_pio_mode(ide_drive_t *drive, const u8 pio)
+static void cs5535_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive)
 {
-	cs5535_set_speed(drive, XFER_PIO_0 + pio);
+	cs5535_set_speed(drive, drive->pio_mode);
 }
 
 static u8 cs5535_cable_detect(ide_hwif_t *hwif)
diff --git a/drivers/ide/cs5536.c b/drivers/ide/cs5536.c
index 9623b852c616..b518ef0e9a35 100644
--- a/drivers/ide/cs5536.c
+++ b/drivers/ide/cs5536.c
@@ -125,11 +125,11 @@ static u8 cs5536_cable_detect(ide_hwif_t *hwif)
 
 /**
  *	cs5536_set_pio_mode		-	PIO timing setup
+ *	@hwif: ATA port
  *	@drive: ATA device
- *	@pio: PIO mode number
  */
 
-static void cs5536_set_pio_mode(ide_drive_t *drive, const u8 pio)
+static void cs5536_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive)
 {
 	static const u8 drv_timings[5] = {
 		0x98, 0x55, 0x32, 0x21, 0x20,
@@ -143,11 +143,12 @@ static void cs5536_set_pio_mode(ide_drive_t *drive, const u8 pio)
 		0x99, 0x92, 0x90, 0x22, 0x20,
 	};
 
-	struct pci_dev *pdev = to_pci_dev(drive->hwif->dev);
+	struct pci_dev *pdev = to_pci_dev(hwif->dev);
 	ide_drive_t *pair = ide_get_pair_dev(drive);
 	int cshift = (drive->dn & 1) ? IDE_CAST_D1_SHIFT : IDE_CAST_D0_SHIFT;
 	unsigned long timings = (unsigned long)ide_get_drivedata(drive);
 	u32 cast;
+	const u8 pio = drive->pio_mode - XFER_PIO_0;
 	u8 cmd_pio = pio;
 
 	if (pair)
diff --git a/drivers/ide/cy82c693.c b/drivers/ide/cy82c693.c
index fbf3dcc26577..ead65c394f00 100644
--- a/drivers/ide/cy82c693.c
+++ b/drivers/ide/cy82c693.c
@@ -80,9 +80,8 @@ static void cy82c693_set_dma_mode(ide_drive_t *drive, const u8 mode)
 	outb(data, CY82_DATA_PORT);
 }
 
-static void cy82c693_set_pio_mode(ide_drive_t *drive, const u8 pio)
+static void cy82c693_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive)
 {
-	ide_hwif_t *hwif = drive->hwif;
 	struct pci_dev *dev = to_pci_dev(hwif->dev);
 	int bus_speed = ide_pci_clk ? ide_pci_clk : 33;
 	const unsigned long T = 1000000 / bus_speed;
@@ -101,7 +100,7 @@ static void cy82c693_set_pio_mode(ide_drive_t *drive, const u8 pio)
 		}
 	}
 
-	ide_timing_compute(drive, XFER_PIO_0 + pio, &t, T, 1);
+	ide_timing_compute(drive, drive->pio_mode, &t, T, 1);
 
 	time_16 = clamp_val(t.recover - 1, 0, 15) |
 		  (clamp_val(t.active - 1, 0, 15) << 4);
diff --git a/drivers/ide/dtc2278.c b/drivers/ide/dtc2278.c
index c6b138122981..6929f7fce93a 100644
--- a/drivers/ide/dtc2278.c
+++ b/drivers/ide/dtc2278.c
@@ -68,11 +68,11 @@ static void sub22 (char b, char c)
 
 static DEFINE_SPINLOCK(dtc2278_lock);
 
-static void dtc2278_set_pio_mode(ide_drive_t *drive, const u8 pio)
+static void dtc2278_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive)
 {
 	unsigned long flags;
 
-	if (pio >= 3) {
+	if (drive->pio_mode >= XFER_PIO_3) {
 		spin_lock_irqsave(&dtc2278_lock, flags);
 		/*
 		 * This enables PIO mode4 (3?) on the first interface
diff --git a/drivers/ide/hpt366.c b/drivers/ide/hpt366.c
index 4d90ac2dbb1b..f1dec519a9e6 100644
--- a/drivers/ide/hpt366.c
+++ b/drivers/ide/hpt366.c
@@ -651,9 +651,9 @@ static void hpt3xx_set_mode(ide_drive_t *drive, const u8 speed)
 	pci_write_config_dword(dev, itr_addr, new_itr);
 }
 
-static void hpt3xx_set_pio_mode(ide_drive_t *drive, const u8 pio)
+static void hpt3xx_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive)
 {
-	hpt3xx_set_mode(drive, XFER_PIO_0 + pio);
+	hpt3xx_set_mode(drive, drive->pio_mode);
 }
 
 static void hpt3xx_maskproc(ide_drive_t *drive, int mask)
diff --git a/drivers/ide/ht6560b.c b/drivers/ide/ht6560b.c
index aafed8060e17..d81e49680c3f 100644
--- a/drivers/ide/ht6560b.c
+++ b/drivers/ide/ht6560b.c
@@ -279,9 +279,10 @@ static void ht_set_prefetch(ide_drive_t *drive, u8 state)
 #endif
 }
 
-static void ht6560b_set_pio_mode(ide_drive_t *drive, const u8 pio)
+static void ht6560b_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive)
 {
 	unsigned long flags, config;
+	const u8 pio = drive->pio_mode - XFER_PIO_0;
 	u8 timing;
 	
 	switch (pio) {
diff --git a/drivers/ide/ide-devsets.c b/drivers/ide/ide-devsets.c
index cb3341ce655c..c6935c78757c 100644
--- a/drivers/ide/ide-devsets.c
+++ b/drivers/ide/ide-devsets.c
@@ -112,10 +112,10 @@ static int set_pio_mode(ide_drive_t *drive, int arg)
 
 			/* take lock for IDE_DFLAG_[NO_]UNMASK/[NO_]IO_32BIT */
 			spin_lock_irqsave(&hwif->lock, flags);
-			port_ops->set_pio_mode(drive, arg);
+			port_ops->set_pio_mode(hwif, drive);
 			spin_unlock_irqrestore(&hwif->lock, flags);
 		} else
-			port_ops->set_pio_mode(drive, arg);
+			port_ops->set_pio_mode(hwif, drive);
 	} else {
 		int keep_dma = !!(drive->dev_flags & IDE_DFLAG_USING_DMA);
 
diff --git a/drivers/ide/ide-xfer-mode.c b/drivers/ide/ide-xfer-mode.c
index c2323869d92a..a62fb03fc1cc 100644
--- a/drivers/ide/ide-xfer-mode.c
+++ b/drivers/ide/ide-xfer-mode.c
@@ -136,7 +136,7 @@ int ide_set_pio_mode(ide_drive_t *drive, const u8 mode)
 	 */
 	if (port_ops->set_dma_mode == NULL) {
 		drive->pio_mode = mode;
-		port_ops->set_pio_mode(drive, mode - XFER_PIO_0);
+		port_ops->set_pio_mode(hwif, drive);
 		return 0;
 	}
 
@@ -144,11 +144,11 @@ int ide_set_pio_mode(ide_drive_t *drive, const u8 mode)
 		if (ide_config_drive_speed(drive, mode))
 			return -1;
 		drive->pio_mode = mode;
-		port_ops->set_pio_mode(drive, mode - XFER_PIO_0);
+		port_ops->set_pio_mode(hwif, drive);
 		return 0;
 	} else {
 		drive->pio_mode = mode;
-		port_ops->set_pio_mode(drive, mode - XFER_PIO_0);
+		port_ops->set_pio_mode(hwif, drive);
 		return ide_config_drive_speed(drive, mode);
 	}
 }
diff --git a/drivers/ide/it8172.c b/drivers/ide/it8172.c
index 0d266a5b524d..9dfdc8741a7b 100644
--- a/drivers/ide/it8172.c
+++ b/drivers/ide/it8172.c
@@ -37,12 +37,12 @@
 
 #define DRV_NAME "IT8172"
 
-static void it8172_set_pio_mode(ide_drive_t *drive, const u8 pio)
+static void it8172_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive)
 {
-	ide_hwif_t *hwif	= drive->hwif;
 	struct pci_dev *dev	= to_pci_dev(hwif->dev);
 	u16 drive_enables;
 	u32 drive_timing;
+	const u8 pio = drive->pio_mode - XFER_PIO_0;
 
 	/*
 	 * The highest value of DIOR/DIOW pulse width and recovery time
@@ -98,14 +98,14 @@ static void it8172_set_dma_mode(ide_drive_t *drive, const u8 speed)
 		pci_write_config_byte(dev, 0x4a, reg4a | u_speed);
 	} else {
 		const u8 mwdma_to_pio[] = { 0, 3, 4 };
-		u8 pio;
 
 		pci_write_config_byte(dev, 0x48, reg48 & ~u_flag);
 		pci_write_config_byte(dev, 0x4a, reg4a & ~a_speed);
 
-		pio = mwdma_to_pio[speed - XFER_MW_DMA_0];
+		drive->pio_mode =
+			mwdma_to_pio[speed - XFER_MW_DMA_0] + XFER_PIO_0;
 
-		it8172_set_pio_mode(drive, pio);
+		it8172_set_pio_mode(hwif, drive);
 	}
 }
 
diff --git a/drivers/ide/it8213.c b/drivers/ide/it8213.c
index 47976167796a..492c07d5f4f3 100644
--- a/drivers/ide/it8213.c
+++ b/drivers/ide/it8213.c
@@ -17,15 +17,14 @@
 
 /**
  *	it8213_set_pio_mode	-	set host controller for PIO mode
+ *	@hwif: port
  *	@drive: drive
- *	@pio: PIO mode number
  *
  *	Set the interface PIO mode.
  */
 
-static void it8213_set_pio_mode(ide_drive_t *drive, const u8 pio)
+static void it8213_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive)
 {
-	ide_hwif_t *hwif	= drive->hwif;
 	struct pci_dev *dev	= to_pci_dev(hwif->dev);
 	int is_slave		= drive->dn & 1;
 	int master_port		= 0x40;
@@ -35,6 +34,7 @@ static void it8213_set_pio_mode(ide_drive_t *drive, const u8 pio)
 	u8 slave_data;
 	static DEFINE_SPINLOCK(tune_lock);
 	int control = 0;
+	const u8 pio = drive->pio_mode - XFER_PIO_0;
 
 	static const u8 timings[][2] = {
 					{ 0, 0 },
@@ -120,7 +120,6 @@ static void it8213_set_dma_mode(ide_drive_t *drive, const u8 speed)
 			pci_write_config_byte(dev, 0x54, reg54 & ~v_flag);
 	} else {
 		const u8 mwdma_to_pio[] = { 0, 3, 4 };
-		u8 pio;
 
 		if (reg48 & u_flag)
 			pci_write_config_byte(dev, 0x48, reg48 & ~u_flag);
@@ -132,11 +131,12 @@ static void it8213_set_dma_mode(ide_drive_t *drive, const u8 speed)
 			pci_write_config_byte(dev, 0x55, (u8) reg55 & ~w_flag);
 
 		if (speed >= XFER_MW_DMA_0)
-			pio = mwdma_to_pio[speed - XFER_MW_DMA_0];
+			drive->pio_mode =
+				mwdma_to_pio[speed - XFER_MW_DMA_0] + XFER_PIO_0;
 		else
-			pio = 2; /* only SWDMA2 is allowed */
+			drive->pio_mode = XFER_PIO_2; /* for SWDMA2 */
 
-		it8213_set_pio_mode(drive, pio);
+		it8213_set_pio_mode(hwif, drive);
 	}
 }
 
diff --git a/drivers/ide/it821x.c b/drivers/ide/it821x.c
index 51aa745246dc..69becb7b9656 100644
--- a/drivers/ide/it821x.c
+++ b/drivers/ide/it821x.c
@@ -228,18 +228,18 @@ static void it821x_clock_strategy(ide_drive_t *drive)
 
 /**
  *	it821x_set_pio_mode	-	set host controller for PIO mode
+ *	@hwif: port
  *	@drive: drive
- *	@pio: PIO mode number
  *
  *	Tune the host to the desired PIO mode taking into the consideration
  *	the maximum PIO mode supported by the other device on the cable.
  */
 
-static void it821x_set_pio_mode(ide_drive_t *drive, const u8 pio)
+static void it821x_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive)
 {
-	ide_hwif_t *hwif = drive->hwif;
 	struct it821x_dev *itdev = ide_get_hwifdata(hwif);
 	ide_drive_t *pair = ide_get_pair_dev(drive);
+	const u8 pio = drive->pio_mode - XFER_PIO_0;
 	u8 unit = drive->dn & 1, set_pio = pio;
 
 	/* Spec says 89 ref driver uses 88 */
diff --git a/drivers/ide/jmicron.c b/drivers/ide/jmicron.c
index bf2be6431b20..ebffb904ed24 100644
--- a/drivers/ide/jmicron.c
+++ b/drivers/ide/jmicron.c
@@ -80,7 +80,7 @@ static u8 jmicron_cable_detect(ide_hwif_t *hwif)
 	return ATA_CBL_PATA80;
 }
 
-static void jmicron_set_pio_mode(ide_drive_t *drive, const u8 pio)
+static void jmicron_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive)
 {
 }
 
diff --git a/drivers/ide/opti621.c b/drivers/ide/opti621.c
index 2052788fab7a..1a53a4c375ed 100644
--- a/drivers/ide/opti621.c
+++ b/drivers/ide/opti621.c
@@ -62,12 +62,12 @@ static u8 read_reg(int reg)
 	return ret;
 }
 
-static void opti621_set_pio_mode(ide_drive_t *drive, const u8 pio)
+static void opti621_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive)
 {
-	ide_hwif_t *hwif = drive->hwif;
 	ide_drive_t *pair = ide_get_pair_dev(drive);
 	unsigned long flags;
-	unsigned long mode = XFER_PIO_0 + pio, pair_mode;
+	unsigned long mode = drive->pio_mode, pair_mode;
+	const u8 pio = mode - XFER_PIO_0;
 	u8 tim, misc, addr_pio = pio, clk;
 
 	/* DRDY is default 2 (by OPTi Databook) */
diff --git a/drivers/ide/palm_bk3710.c b/drivers/ide/palm_bk3710.c
index f8eddf05ecb8..0f262d07c378 100644
--- a/drivers/ide/palm_bk3710.c
+++ b/drivers/ide/palm_bk3710.c
@@ -203,12 +203,13 @@ static void palm_bk3710_set_dma_mode(ide_drive_t *drive, u8 xferspeed)
 	}
 }
 
-static void palm_bk3710_set_pio_mode(ide_drive_t *drive, u8 pio)
+static void palm_bk3710_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive)
 {
 	unsigned int cycle_time;
 	int is_slave = drive->dn & 1;
 	ide_drive_t *mate;
-	void __iomem *base = (void *)drive->hwif->dma_base;
+	void __iomem *base = (void *)hwif->dma_base;
+	const u8 pio = drive->pio_mode - XFER_PIO_0;
 
 	/*
 	 * Obtain the drive PIO data for tuning the Palm Chip registers
diff --git a/drivers/ide/pdc202xx_new.c b/drivers/ide/pdc202xx_new.c
index 65ba8239e7b5..874acd2bb6e6 100644
--- a/drivers/ide/pdc202xx_new.c
+++ b/drivers/ide/pdc202xx_new.c
@@ -167,11 +167,11 @@ static void pdcnew_set_dma_mode(ide_drive_t *drive, const u8 speed)
  	}
 }
 
-static void pdcnew_set_pio_mode(ide_drive_t *drive, const u8 pio)
+static void pdcnew_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive)
 {
-	ide_hwif_t *hwif = drive->hwif;
 	struct pci_dev *dev = to_pci_dev(hwif->dev);
 	u8 adj = (drive->dn & 1) ? 0x08 : 0x00;
+	const u8 pio = drive->pio_mode - XFER_PIO_0;
 
 	if (max_dma_rate(dev) == 4) {
 		set_indexed_reg(hwif, 0x0c + adj, pio_timings[pio].reg0c);
diff --git a/drivers/ide/pdc202xx_old.c b/drivers/ide/pdc202xx_old.c
index 1d20594ee420..402aab7f3baa 100644
--- a/drivers/ide/pdc202xx_old.c
+++ b/drivers/ide/pdc202xx_old.c
@@ -76,9 +76,9 @@ static void pdc202xx_set_mode(ide_drive_t *drive, const u8 speed)
 	}
 }
 
-static void pdc202xx_set_pio_mode(ide_drive_t *drive, const u8 pio)
+static void pdc202xx_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive)
 {
-	pdc202xx_set_mode(drive, XFER_PIO_0 + pio);
+	pdc202xx_set_mode(drive, drive->pio_mode);
 }
 
 static int pdc202xx_test_irq(ide_hwif_t *hwif)
diff --git a/drivers/ide/piix.c b/drivers/ide/piix.c
index bf14f39bd3a7..64b3041daa60 100644
--- a/drivers/ide/piix.c
+++ b/drivers/ide/piix.c
@@ -59,15 +59,14 @@ static int no_piix_dma;
 
 /**
  *	piix_set_pio_mode	-	set host controller for PIO mode
+ *	@port: port
  *	@drive: drive
- *	@pio: PIO mode number
  *
  *	Set the interface PIO mode based upon the settings done by AMI BIOS.
  */
 
-static void piix_set_pio_mode(ide_drive_t *drive, const u8 pio)
+static void piix_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive)
 {
-	ide_hwif_t *hwif	= drive->hwif;
 	struct pci_dev *dev	= to_pci_dev(hwif->dev);
 	int is_slave		= drive->dn & 1;
 	int master_port		= hwif->channel ? 0x42 : 0x40;
@@ -77,6 +76,7 @@ static void piix_set_pio_mode(ide_drive_t *drive, const u8 pio)
 	u8 slave_data;
 	static DEFINE_SPINLOCK(tune_lock);
 	int control = 0;
+	const u8 pio = drive->pio_mode - XFER_PIO_0;
 
 				     /* ISP  RTC */
 	static const u8 timings[][2]= {
@@ -176,7 +176,6 @@ static void piix_set_dma_mode(ide_drive_t *drive, const u8 speed)
 			pci_write_config_byte(dev, 0x54, reg54 & ~v_flag);
 	} else {
 		const u8 mwdma_to_pio[] = { 0, 3, 4 };
-		u8 pio;
 
 		if (reg48 & u_flag)
 			pci_write_config_byte(dev, 0x48, reg48 & ~u_flag);
@@ -188,11 +187,12 @@ static void piix_set_dma_mode(ide_drive_t *drive, const u8 speed)
 			pci_write_config_byte(dev, 0x55, (u8) reg55 & ~w_flag);
 
 		if (speed >= XFER_MW_DMA_0)
-			pio = mwdma_to_pio[speed - XFER_MW_DMA_0];
+			drive->pio_mode =
+				mwdma_to_pio[speed - XFER_MW_DMA_0] + XFER_PIO_0;
 		else
-			pio = 2; /* only SWDMA2 is allowed */
+			drive->pio_mode = XFER_PIO_2; /* for SWDMA2 */
 
-		piix_set_pio_mode(drive, pio);
+		piix_set_pio_mode(hwif, drive);
 	}
 }
 
diff --git a/drivers/ide/pmac.c b/drivers/ide/pmac.c
index 7a4e788cab2f..a167968a2d42 100644
--- a/drivers/ide/pmac.c
+++ b/drivers/ide/pmac.c
@@ -496,12 +496,11 @@ static void pmac_write_devctl(ide_hwif_t *hwif, u8 ctl)
 /*
  * Old tuning functions (called on hdparm -p), sets up drive PIO timings
  */
-static void
-pmac_ide_set_pio_mode(ide_drive_t *drive, const u8 pio)
+static void pmac_ide_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive)
 {
-	ide_hwif_t *hwif = drive->hwif;
 	pmac_ide_hwif_t *pmif =
 		(pmac_ide_hwif_t *)dev_get_drvdata(hwif->gendev.parent);
+	const u8 pio = drive->pio_mode - XFER_PIO_0;
 	struct ide_timing *tim = ide_timing_find_mode(XFER_PIO_0 + pio);
 	u32 *timings, t;
 	unsigned accessTicks, recTicks;
diff --git a/drivers/ide/qd65xx.c b/drivers/ide/qd65xx.c
index 74696edc8d1d..3f0244fd8e62 100644
--- a/drivers/ide/qd65xx.c
+++ b/drivers/ide/qd65xx.c
@@ -189,15 +189,13 @@ static void qd_set_timing (ide_drive_t *drive, u8 timing)
 	printk(KERN_DEBUG "%s: %#x\n", drive->name, timing);
 }
 
-static void qd6500_set_pio_mode(ide_drive_t *drive, const u8 pio)
+static void qd6500_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive)
 {
 	u16 *id = drive->id;
 	int active_time   = 175;
 	int recovery_time = 415; /* worst case values from the dos driver */
 
-	/*
-	 * FIXME: use "pio" value
-	 */
+	/* FIXME: use drive->pio_mode value */
 	if (!qd_find_disk_type(drive, &active_time, &recovery_time) &&
 	    (id[ATA_ID_OLD_PIO_MODES] & 0xff) && (id[ATA_ID_FIELD_VALID] & 2) &&
 	    id[ATA_ID_EIDE_PIO] >= 240) {
@@ -211,9 +209,9 @@ static void qd6500_set_pio_mode(ide_drive_t *drive, const u8 pio)
 				active_time, recovery_time));
 }
 
-static void qd6580_set_pio_mode(ide_drive_t *drive, const u8 pio)
+static void qd6580_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive)
 {
-	ide_hwif_t *hwif = drive->hwif;
+	const u8 pio = drive->pio_mode - XFER_PIO_0;
 	struct ide_timing *t = ide_timing_find_mode(XFER_PIO_0 + pio);
 	unsigned int cycle_time;
 	int active_time   = 175;
diff --git a/drivers/ide/sc1200.c b/drivers/ide/sc1200.c
index d467478d68da..bb0166e460ab 100644
--- a/drivers/ide/sc1200.c
+++ b/drivers/ide/sc1200.c
@@ -193,10 +193,10 @@ static int sc1200_dma_end(ide_drive_t *drive)
  * will have valid default PIO timings set up before we get here.
  */
 
-static void sc1200_set_pio_mode(ide_drive_t *drive, const u8 pio)
+static void sc1200_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive)
 {
-	ide_hwif_t	*hwif = drive->hwif;
 	int		mode = -1;
+	const u8	pio = drive->pio_mode - XFER_PIO_0;
 
 	/*
 	 * bad abuse of ->set_pio_mode interface
diff --git a/drivers/ide/scc_pata.c b/drivers/ide/scc_pata.c
index 1104bb301eb9..23e16e4460ee 100644
--- a/drivers/ide/scc_pata.c
+++ b/drivers/ide/scc_pata.c
@@ -199,16 +199,15 @@ scc_ide_outsl(unsigned long port, void *addr, u32 count)
 
 /**
  *	scc_set_pio_mode	-	set host controller for PIO mode
+ *	@hwif: port
  *	@drive: drive
- *	@pio: PIO mode number
  *
  *	Load the timing settings for this device mode into the
  *	controller.
  */
 
-static void scc_set_pio_mode(ide_drive_t *drive, const u8 pio)
+static void scc_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive)
 {
-	ide_hwif_t *hwif = drive->hwif;
 	struct scc_ports *ports = ide_get_hwifdata(hwif);
 	unsigned long ctl_base = ports->ctl;
 	unsigned long cckctrl_port = ctl_base + 0xff0;
@@ -216,6 +215,7 @@ static void scc_set_pio_mode(ide_drive_t *drive, const u8 pio)
 	unsigned long pioct_port = ctl_base + 0x004;
 	unsigned long reg;
 	int offset;
+	const u8 pio = drive->pio_mode - XFER_PIO_0;
 
 	reg = in_be32((void __iomem *)cckctrl_port);
 	if (reg & CCKCTRL_ATACLKOEN) {
diff --git a/drivers/ide/serverworks.c b/drivers/ide/serverworks.c
index 657f0433ec50..a56bc51ae032 100644
--- a/drivers/ide/serverworks.c
+++ b/drivers/ide/serverworks.c
@@ -106,12 +106,13 @@ static u8 svwks_csb_check (struct pci_dev *dev)
 	return 0;
 }
 
-static void svwks_set_pio_mode(ide_drive_t *drive, const u8 pio)
+static void svwks_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive)
 {
 	static const u8 pio_modes[] = { 0x5d, 0x47, 0x34, 0x22, 0x20 };
 	static const u8 drive_pci[] = { 0x41, 0x40, 0x43, 0x42 };
 
-	struct pci_dev *dev = to_pci_dev(drive->hwif->dev);
+	struct pci_dev *dev = to_pci_dev(hwif->dev);
+	const u8 pio = drive->pio_mode - XFER_PIO_0;
 
 	pci_write_config_byte(dev, drive_pci[drive->dn], pio_modes[pio]);
 
diff --git a/drivers/ide/siimage.c b/drivers/ide/siimage.c
index d95df528562f..97266958f744 100644
--- a/drivers/ide/siimage.c
+++ b/drivers/ide/siimage.c
@@ -229,19 +229,18 @@ static u8 sil_sata_udma_filter(ide_drive_t *drive)
 
 /**
  *	sil_set_pio_mode	-	set host controller for PIO mode
+ *	@hwif: port
  *	@drive: drive
- *	@pio: PIO mode number
  *
  *	Load the timing settings for this device mode into the
  *	controller.
  */
 
-static void sil_set_pio_mode(ide_drive_t *drive, u8 pio)
+static void sil_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive)
 {
 	static const u16 tf_speed[]   = { 0x328a, 0x2283, 0x1281, 0x10c3, 0x10c1 };
 	static const u16 data_speed[] = { 0x328a, 0x2283, 0x1104, 0x10c3, 0x10c1 };
 
-	ide_hwif_t *hwif	= drive->hwif;
 	struct pci_dev *dev	= to_pci_dev(hwif->dev);
 	ide_drive_t *pair	= ide_get_pair_dev(drive);
 	u32 speedt		= 0;
@@ -249,6 +248,7 @@ static void sil_set_pio_mode(ide_drive_t *drive, u8 pio)
 	unsigned long addr	= siimage_seldev(drive, 0x04);
 	unsigned long tfaddr	= siimage_selreg(hwif,	0x02);
 	unsigned long base	= (unsigned long)hwif->hwif_data;
+	const u8 pio		= drive->pio_mode - XFER_PIO_0;
 	u8 tf_pio		= pio;
 	u8 mmio			= (hwif->host_flags & IDE_HFLAG_MMIO) ? 1 : 0;
 	u8 addr_mask		= hwif->channel ? (mmio ? 0xF4 : 0x84)
diff --git a/drivers/ide/sis5513.c b/drivers/ide/sis5513.c
index 468706082fb5..5a0192060531 100644
--- a/drivers/ide/sis5513.c
+++ b/drivers/ide/sis5513.c
@@ -290,10 +290,10 @@ static void config_drive_art_rwp(ide_drive_t *drive)
 		pci_write_config_byte(dev, 0x4b, rw_prefetch);
 }
 
-static void sis_set_pio_mode(ide_drive_t *drive, const u8 pio)
+static void sis_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive)
 {
 	config_drive_art_rwp(drive);
-	sis_program_timings(drive, XFER_PIO_0 + pio);
+	sis_program_timings(drive, drive->pio_mode);
 }
 
 static void sis_ata133_program_udma_timings(ide_drive_t *drive, const u8 mode)
diff --git a/drivers/ide/sl82c105.c b/drivers/ide/sl82c105.c
index 3c2bbf0057ea..419cd3bc6c84 100644
--- a/drivers/ide/sl82c105.c
+++ b/drivers/ide/sl82c105.c
@@ -63,12 +63,13 @@ static unsigned int get_pio_timings(ide_drive_t *drive, u8 pio)
 /*
  * Configure the chipset for PIO mode.
  */
-static void sl82c105_set_pio_mode(ide_drive_t *drive, const u8 pio)
+static void sl82c105_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive)
 {
-	struct pci_dev *dev	= to_pci_dev(drive->hwif->dev);
+	struct pci_dev *dev	= to_pci_dev(hwif->dev);
 	unsigned long timings	= (unsigned long)ide_get_drivedata(drive);
 	int reg			= 0x44 + drive->dn * 4;
 	u16 drv_ctrl;
+	const u8 pio		= drive->pio_mode - XFER_PIO_0;
 
 	drv_ctrl = get_pio_timings(drive, pio);
 
diff --git a/drivers/ide/slc90e66.c b/drivers/ide/slc90e66.c
index 1ccfb40e7215..019777522cd2 100644
--- a/drivers/ide/slc90e66.c
+++ b/drivers/ide/slc90e66.c
@@ -18,9 +18,8 @@
 
 static DEFINE_SPINLOCK(slc90e66_lock);
 
-static void slc90e66_set_pio_mode(ide_drive_t *drive, const u8 pio)
+static void slc90e66_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive)
 {
-	ide_hwif_t *hwif	= drive->hwif;
 	struct pci_dev *dev	= to_pci_dev(hwif->dev);
 	int is_slave		= drive->dn & 1;
 	int master_port		= hwif->channel ? 0x42 : 0x40;
@@ -29,6 +28,8 @@ static void slc90e66_set_pio_mode(ide_drive_t *drive, const u8 pio)
 	u16 master_data;
 	u8 slave_data;
 	int control = 0;
+	const u8 pio = drive->pio_mode - XFER_PIO_0;
+
 				     /* ISP  RTC */
 	static const u8 timings[][2] = {
 					{ 0, 0 },
@@ -98,7 +99,6 @@ static void slc90e66_set_dma_mode(ide_drive_t *drive, const u8 speed)
 		}
 	} else {
 		const u8 mwdma_to_pio[] = { 0, 3, 4 };
-		u8 pio;
 
 		if (reg48 & u_flag)
 			pci_write_config_word(dev, 0x48, reg48 & ~u_flag);
@@ -106,11 +106,12 @@ static void slc90e66_set_dma_mode(ide_drive_t *drive, const u8 speed)
 			pci_write_config_word(dev, 0x4a, reg4a & ~a_speed);
 
 		if (speed >= XFER_MW_DMA_0)
-			pio = mwdma_to_pio[speed - XFER_MW_DMA_0];
+			drive->pio_mode =
+				mwdma_to_pio[speed - XFER_MW_DMA_0] + XFER_PIO_0;
 		else
-			pio = 2; /* only SWDMA2 is allowed */
+			drive->pio_mode = XFER_PIO_2; /* for SWDMA2 */
 
-		slc90e66_set_pio_mode(drive, pio);
+		slc90e66_set_pio_mode(hwif, drive);
 	}
 }
 
diff --git a/drivers/ide/tc86c001.c b/drivers/ide/tc86c001.c
index 05a93d6baecc..f2cb62bf3f22 100644
--- a/drivers/ide/tc86c001.c
+++ b/drivers/ide/tc86c001.c
@@ -41,9 +41,9 @@ static void tc86c001_set_mode(ide_drive_t *drive, const u8 speed)
 	outw(scr, scr_port);
 }
 
-static void tc86c001_set_pio_mode(ide_drive_t *drive, const u8 pio)
+static void tc86c001_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive)
 {
-	tc86c001_set_mode(drive, XFER_PIO_0 + pio);
+	tc86c001_set_mode(drive, drive->pio_mode);
 }
 
 /*
diff --git a/drivers/ide/triflex.c b/drivers/ide/triflex.c
index 8773c3ba7462..d34a7eecdea5 100644
--- a/drivers/ide/triflex.c
+++ b/drivers/ide/triflex.c
@@ -82,9 +82,9 @@ static void triflex_set_mode(ide_drive_t *drive, const u8 speed)
 	pci_write_config_dword(dev, channel_offset, triflex_timings);
 }
 
-static void triflex_set_pio_mode(ide_drive_t *drive, const u8 pio)
+static void triflex_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive)
 {
-	triflex_set_mode(drive, XFER_PIO_0 + pio);
+	triflex_set_mode(drive, drive->pio_mode);
 }
 
 static const struct ide_port_ops triflex_port_ops = {
diff --git a/drivers/ide/tx4938ide.c b/drivers/ide/tx4938ide.c
index fd59c0d235b5..326d4683488b 100644
--- a/drivers/ide/tx4938ide.c
+++ b/drivers/ide/tx4938ide.c
@@ -56,11 +56,10 @@ static void tx4938ide_tune_ebusc(unsigned int ebus_ch,
 		     &tx4938_ebuscptr->cr[ebus_ch]);
 }
 
-static void tx4938ide_set_pio_mode(ide_drive_t *drive, const u8 pio)
+static void tx4938ide_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive)
 {
-	ide_hwif_t *hwif = drive->hwif;
 	struct tx4938ide_platform_info *pdata = hwif->dev->platform_data;
-	u8 safe = pio;
+	u8 safe = drive->pio_mode - XFER_PIO_0;
 	ide_drive_t *pair;
 
 	pair = ide_get_pair_dev(drive);
diff --git a/drivers/ide/tx4939ide.c b/drivers/ide/tx4939ide.c
index 64b58ecc3f0e..5228a4786de5 100644
--- a/drivers/ide/tx4939ide.c
+++ b/drivers/ide/tx4939ide.c
@@ -104,11 +104,11 @@ static void tx4939ide_writeb(u8 val, void __iomem *base, u32 reg)
 
 #define TX4939IDE_BASE(hwif)	((void __iomem *)(hwif)->extra_base)
 
-static void tx4939ide_set_pio_mode(ide_drive_t *drive, const u8 pio)
+static void tx4939ide_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive)
 {
-	ide_hwif_t *hwif = drive->hwif;
 	int is_slave = drive->dn;
 	u32 mask, val;
+	const u8 pio = drive->pio_mode - XFER_PIO_0;
 	u8 safe = pio;
 	ide_drive_t *pair;
 
diff --git a/drivers/ide/umc8672.c b/drivers/ide/umc8672.c
index 60f936e2319c..47adcd09cb26 100644
--- a/drivers/ide/umc8672.c
+++ b/drivers/ide/umc8672.c
@@ -104,10 +104,11 @@ static void umc_set_speeds(u8 speeds[])
 		speeds[0], speeds[1], speeds[2], speeds[3]);
 }
 
-static void umc_set_pio_mode(ide_drive_t *drive, const u8 pio)
+static void umc_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive)
 {
-	ide_hwif_t *hwif = drive->hwif, *mate = hwif->mate;
+	ide_hwif_t *mate = hwif->mate;
 	unsigned long uninitialized_var(flags);
+	const u8 pio = drive->pio_mode - XFER_PIO_0;
 
 	printk("%s: setting umc8672 to PIO mode%d (speed %d)\n",
 		drive->name, pio, pio_to_umc[pio]);
diff --git a/drivers/ide/via82cxxx.c b/drivers/ide/via82cxxx.c
index fbecf8ea8207..6d995fc9d4f5 100644
--- a/drivers/ide/via82cxxx.c
+++ b/drivers/ide/via82cxxx.c
@@ -208,15 +208,15 @@ static void via_set_drive(ide_drive_t *drive, const u8 speed)
 
 /**
  *	via_set_pio_mode	-	set host controller for PIO mode
+ *	@hwif: port
  *	@drive: drive
- *	@pio: PIO mode number
  *
  *	A callback from the upper layers for PIO-only tuning.
  */
 
-static void via_set_pio_mode(ide_drive_t *drive, const u8 pio)
+static void via_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive)
 {
-	via_set_drive(drive, XFER_PIO_0 + pio);
+	via_set_drive(drive, drive->pio_mode);
 }
 
 static struct via_isa_bridge *via_config_find(struct pci_dev **isa)
diff --git a/include/linux/ide.h b/include/linux/ide.h
index 746ef9fdabcb..803ec306883c 100644
--- a/include/linux/ide.h
+++ b/include/linux/ide.h
@@ -624,7 +624,7 @@ extern const struct ide_tp_ops default_tp_ops;
  */
 struct ide_port_ops {
 	void	(*init_dev)(ide_drive_t *);
-	void	(*set_pio_mode)(ide_drive_t *, const u8);
+	void	(*set_pio_mode)(struct hwif_s *, ide_drive_t *);
 	void	(*set_dma_mode)(ide_drive_t *, const u8);
 	int	(*reset_poll)(ide_drive_t *);
 	void	(*pre_reset)(ide_drive_t *);
-- 
cgit v1.2.3-59-g8ed1b


From 8776168ca2151850164af1de5565d01f7b8b2c53 Mon Sep 17 00:00:00 2001
From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Date: Tue, 19 Jan 2010 01:45:29 -0800
Subject: ide: change ->set_dma_mode method parameters

Change ->set_dma_mode method parameters to match ->set_dmamode method
used in struct ata_port_operations.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
 drivers/ide/aec62xx.c       | 10 +++++-----
 drivers/ide/alim15x3.c      |  6 +++---
 drivers/ide/amd74xx.c       |  7 ++++---
 drivers/ide/atiixp.c        |  7 ++++---
 drivers/ide/au1xxx-ide.c    |  4 ++--
 drivers/ide/cmd64x.c        |  4 ++--
 drivers/ide/cs5520.c        |  4 ++--
 drivers/ide/cs5530.c        |  6 +++---
 drivers/ide/cs5535.c        |  6 +++---
 drivers/ide/cs5536.c        |  7 ++++---
 drivers/ide/cy82c693.c      |  4 ++--
 drivers/ide/hpt366.c        |  7 ++++---
 drivers/ide/icside.c        |  3 ++-
 drivers/ide/ide-xfer-mode.c |  4 ++--
 drivers/ide/it8172.c        |  4 ++--
 drivers/ide/it8213.c        |  6 +++---
 drivers/ide/it821x.c        |  6 ++++--
 drivers/ide/jmicron.c       |  4 ++--
 drivers/ide/palm_bk3710.c   |  5 +++--
 drivers/ide/pdc202xx_new.c  |  4 ++--
 drivers/ide/pdc202xx_old.c  |  7 ++++---
 drivers/ide/piix.c          |  6 +++---
 drivers/ide/pmac.c          |  4 ++--
 drivers/ide/sc1200.c        |  4 ++--
 drivers/ide/scc_pata.c      |  6 +++---
 drivers/ide/serverworks.c   |  4 ++--
 drivers/ide/sgiioc4.c       |  2 +-
 drivers/ide/siimage.c       |  6 +++---
 drivers/ide/sis5513.c       |  4 +++-
 drivers/ide/sl82c105.c      |  3 ++-
 drivers/ide/slc90e66.c      |  4 ++--
 drivers/ide/tc86c001.c      |  7 ++++---
 drivers/ide/triflex.c       |  8 ++++----
 drivers/ide/tx4939ide.c     |  4 ++--
 drivers/ide/via82cxxx.c     |  9 +++++----
 include/linux/ide.h         |  2 +-
 36 files changed, 101 insertions(+), 87 deletions(-)

(limited to 'drivers')

diff --git a/drivers/ide/aec62xx.c b/drivers/ide/aec62xx.c
index 3790847361c3..57d00caefc86 100644
--- a/drivers/ide/aec62xx.c
+++ b/drivers/ide/aec62xx.c
@@ -81,15 +81,15 @@ static u8 pci_bus_clock_list_ultra (u8 speed, struct chipset_bus_clock_list_entr
 	return chipset_table->ultra_settings;
 }
 
-static void aec6210_set_mode(ide_drive_t *drive, const u8 speed)
+static void aec6210_set_mode(ide_hwif_t *hwif, ide_drive_t *drive)
 {
-	ide_hwif_t *hwif	= drive->hwif;
 	struct pci_dev *dev	= to_pci_dev(hwif->dev);
 	struct ide_host *host	= pci_get_drvdata(dev);
 	struct chipset_bus_clock_list_entry *bus_clock = host->host_priv;
 	u16 d_conf		= 0;
 	u8 ultra = 0, ultra_conf = 0;
 	u8 tmp0 = 0, tmp1 = 0, tmp2 = 0;
+	const u8 speed = drive->dma_mode;
 	unsigned long flags;
 
 	local_irq_save(flags);
@@ -109,15 +109,15 @@ static void aec6210_set_mode(ide_drive_t *drive, const u8 speed)
 	local_irq_restore(flags);
 }
 
-static void aec6260_set_mode(ide_drive_t *drive, const u8 speed)
+static void aec6260_set_mode(ide_hwif_t *hwif, ide_drive_t *drive)
 {
-	ide_hwif_t *hwif	= drive->hwif;
 	struct pci_dev *dev	= to_pci_dev(hwif->dev);
 	struct ide_host *host	= pci_get_drvdata(dev);
 	struct chipset_bus_clock_list_entry *bus_clock = host->host_priv;
 	u8 unit			= drive->dn & 1;
 	u8 tmp1 = 0, tmp2 = 0;
 	u8 ultra = 0, drive_conf = 0, ultra_conf = 0;
+	const u8 speed = drive->dma_mode;
 	unsigned long flags;
 
 	local_irq_save(flags);
@@ -137,7 +137,7 @@ static void aec6260_set_mode(ide_drive_t *drive, const u8 speed)
 static void aec_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive)
 {
 	drive->dma_mode = drive->pio_mode;
-	hwif->port_ops->set_dma_mode(drive, drive->dma_mode);
+	hwif->port_ops->set_dma_mode(hwif, drive);
 }
 
 static int init_chipset_aec62xx(struct pci_dev *dev)
diff --git a/drivers/ide/alim15x3.c b/drivers/ide/alim15x3.c
index 28cee1055f76..6f0debae4e27 100644
--- a/drivers/ide/alim15x3.c
+++ b/drivers/ide/alim15x3.c
@@ -121,16 +121,16 @@ static u8 ali_udma_filter(ide_drive_t *drive)
 
 /**
  *	ali_set_dma_mode	-	set host controller for DMA mode
+ *	@hwif: port
  *	@drive: drive
- *	@speed: DMA mode
  *
  *	Configure the hardware for the desired IDE transfer mode.
  */
 
-static void ali_set_dma_mode(ide_drive_t *drive, const u8 speed)
+static void ali_set_dma_mode(ide_hwif_t *hwif, ide_drive_t *drive)
 {
-	ide_hwif_t *hwif	= drive->hwif;
 	struct pci_dev *dev	= to_pci_dev(hwif->dev);
+	const u8 speed		= drive->dma_mode;
 	u8 speed1		= speed;
 	u8 unit			= drive->dn & 1;
 	u8 tmpbyte		= 0x00;
diff --git a/drivers/ide/amd74xx.c b/drivers/ide/amd74xx.c
index 3eee7be7ca6f..b7e105338205 100644
--- a/drivers/ide/amd74xx.c
+++ b/drivers/ide/amd74xx.c
@@ -79,14 +79,14 @@ static void amd_set_speed(struct pci_dev *dev, u8 dn, u8 udma_mask,
  * to a desired transfer mode.  It also can be called by upper layers.
  */
 
-static void amd_set_drive(ide_drive_t *drive, const u8 speed)
+static void amd_set_drive(ide_hwif_t *hwif, ide_drive_t *drive)
 {
-	ide_hwif_t *hwif = drive->hwif;
 	struct pci_dev *dev = to_pci_dev(hwif->dev);
 	ide_drive_t *peer = ide_get_pair_dev(drive);
 	struct ide_timing t, p;
 	int T, UT;
 	u8 udma_mask = hwif->ultra_mask;
+	const u8 speed = drive->dma_mode;
 
 	T = 1000000000 / amd_clock;
 	UT = (udma_mask == ATA_UDMA2) ? T : (T / 2);
@@ -110,7 +110,8 @@ static void amd_set_drive(ide_drive_t *drive, const u8 speed)
 
 static void amd_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive)
 {
-	amd_set_drive(drive, drive->pio_mode);
+	drive->dma_mode = drive->pio_mode;
+	amd_set_drive(hwif, drive);
 }
 
 static void amd7409_cable_detect(struct pci_dev *dev)
diff --git a/drivers/ide/atiixp.c b/drivers/ide/atiixp.c
index b6848dfb93b0..15f0ead89f5c 100644
--- a/drivers/ide/atiixp.c
+++ b/drivers/ide/atiixp.c
@@ -75,21 +75,22 @@ static void atiixp_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive)
 
 /**
  *	atiixp_set_dma_mode	-	set host controller for DMA mode
+ *	@hwif: port
  *	@drive: drive
- *	@speed: DMA mode
  *
  *	Set a ATIIXP host controller to the desired DMA mode.  This involves
  *	programming the right timing data into the PCI configuration space.
  */
 
-static void atiixp_set_dma_mode(ide_drive_t *drive, const u8 speed)
+static void atiixp_set_dma_mode(ide_hwif_t *hwif, ide_drive_t *drive)
 {
-	struct pci_dev *dev = to_pci_dev(drive->hwif->dev);
+	struct pci_dev *dev = to_pci_dev(hwif->dev);
 	unsigned long flags;
 	int timing_shift = (drive->dn ^ 1) * 8;
 	u32 tmp32;
 	u16 tmp16;
 	u16 udma_ctl = 0;
+	const u8 speed = drive->dma_mode;
 
 	spin_lock_irqsave(&atiixp_lock, flags);
 
diff --git a/drivers/ide/au1xxx-ide.c b/drivers/ide/au1xxx-ide.c
index c90e9b0a9f6e..e2fd378ba9de 100644
--- a/drivers/ide/au1xxx-ide.c
+++ b/drivers/ide/au1xxx-ide.c
@@ -160,11 +160,11 @@ static void au1xxx_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive)
 	au_writel(mem_stcfg,MEM_STCFG2);
 }
 
-static void auide_set_dma_mode(ide_drive_t *drive, const u8 speed)
+static void auide_set_dma_mode(ide_hwif_t *hwif, ide_drive_t *drive)
 {
 	int mem_sttime = 0, mem_stcfg = au_readl(MEM_STCFG2);
 
-	switch(speed) {
+	switch (drive->dma_mode) {
 #ifdef CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA
 	case XFER_MW_DMA_2:
 		mem_sttime = SBC_IDE_TIMING(MDMA2);
diff --git a/drivers/ide/cmd64x.c b/drivers/ide/cmd64x.c
index 0b11745937e7..a65a69171250 100644
--- a/drivers/ide/cmd64x.c
+++ b/drivers/ide/cmd64x.c
@@ -141,12 +141,12 @@ static void cmd64x_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive)
 	cmd64x_program_timings(drive, XFER_PIO_0 + pio);
 }
 
-static void cmd64x_set_dma_mode(ide_drive_t *drive, const u8 speed)
+static void cmd64x_set_dma_mode(ide_hwif_t *hwif, ide_drive_t *drive)
 {
-	ide_hwif_t *hwif	= drive->hwif;
 	struct pci_dev *dev	= to_pci_dev(hwif->dev);
 	u8 unit			= drive->dn & 0x01;
 	u8 regU = 0, pciU	= hwif->channel ? UDIDETCR1 : UDIDETCR0;
+	const u8 speed		= drive->dma_mode;
 
 	pci_read_config_byte(dev, pciU, &regU);
 	regU &= ~(unit ? 0xCA : 0x35);
diff --git a/drivers/ide/cs5520.c b/drivers/ide/cs5520.c
index b8094f049f3e..2c1e5f7cd261 100644
--- a/drivers/ide/cs5520.c
+++ b/drivers/ide/cs5520.c
@@ -81,12 +81,12 @@ static void cs5520_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive)
 		(cs5520_pio_clocks[pio].assert));
 }
 
-static void cs5520_set_dma_mode(ide_drive_t *drive, const u8 speed)
+static void cs5520_set_dma_mode(ide_hwif_t *hwif, ide_drive_t *drive)
 {
 	printk(KERN_ERR "cs55x0: bad ide timing.\n");
 
 	drive->pio_mode = XFER_PIO_0 + 0;
-	cs5520_set_pio_mode(drive->hwif, drive);
+	cs5520_set_pio_mode(hwif, drive);
 }
 
 static const struct ide_port_ops cs5520_port_ops = {
diff --git a/drivers/ide/cs5530.c b/drivers/ide/cs5530.c
index 4ced40255ad6..4dc4eb92b076 100644
--- a/drivers/ide/cs5530.c
+++ b/drivers/ide/cs5530.c
@@ -100,12 +100,12 @@ out:
 	return mask;
 }
 
-static void cs5530_set_dma_mode(ide_drive_t *drive, const u8 mode)
+static void cs5530_set_dma_mode(ide_hwif_t *hwif, ide_drive_t *drive)
 {
 	unsigned long basereg;
 	unsigned int reg, timings = 0;
 
-	switch (mode) {
+	switch (drive->dma_mode) {
 		case XFER_UDMA_0:	timings = 0x00921250; break;
 		case XFER_UDMA_1:	timings = 0x00911140; break;
 		case XFER_UDMA_2:	timings = 0x00911030; break;
@@ -113,7 +113,7 @@ static void cs5530_set_dma_mode(ide_drive_t *drive, const u8 mode)
 		case XFER_MW_DMA_1:	timings = 0x00012121; break;
 		case XFER_MW_DMA_2:	timings = 0x00002020; break;
 	}
-	basereg = CS5530_BASEREG(drive->hwif);
+	basereg = CS5530_BASEREG(hwif);
 	reg = inl(basereg + 4);			/* get drive0 config register */
 	timings |= reg & 0x80000000;		/* preserve PIO format bit */
 	if ((drive-> dn & 1) == 0) {		/* are we configuring drive0? */
diff --git a/drivers/ide/cs5535.c b/drivers/ide/cs5535.c
index 7974415ea89f..740002b2f3e8 100644
--- a/drivers/ide/cs5535.c
+++ b/drivers/ide/cs5535.c
@@ -129,15 +129,15 @@ static void cs5535_set_speed(ide_drive_t *drive, const u8 speed)
 
 /**
  *	cs5535_set_dma_mode	-	set host controller for DMA mode
+ *	@hwif: port
  *	@drive: drive
- *	@speed: DMA mode
  *
  *	Programs the chipset for DMA mode.
  */
 
-static void cs5535_set_dma_mode(ide_drive_t *drive, const u8 speed)
+static void cs5535_set_dma_mode(ide_hwif_t *hwif, ide_drive_t *drive)
 {
-	cs5535_set_speed(drive, speed);
+	cs5535_set_speed(drive, drive->dma_mode);
 }
 
 /**
diff --git a/drivers/ide/cs5536.c b/drivers/ide/cs5536.c
index b518ef0e9a35..70871fbc3c0a 100644
--- a/drivers/ide/cs5536.c
+++ b/drivers/ide/cs5536.c
@@ -173,11 +173,11 @@ static void cs5536_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive)
 
 /**
  *	cs5536_set_dma_mode		-	DMA timing setup
+ *	@hwif: ATA port
  *	@drive: ATA device
- *	@mode: DMA mode
  */
 
-static void cs5536_set_dma_mode(ide_drive_t *drive, const u8 mode)
+static void cs5536_set_dma_mode(ide_hwif_t *hwif, ide_drive_t *drive)
 {
 	static const u8 udma_timings[6] = {
 		0xc2, 0xc1, 0xc0, 0xc4, 0xc5, 0xc6,
@@ -187,10 +187,11 @@ static void cs5536_set_dma_mode(ide_drive_t *drive, const u8 mode)
 		0x67, 0x21, 0x20,
 	};
 
-	struct pci_dev *pdev = to_pci_dev(drive->hwif->dev);
+	struct pci_dev *pdev = to_pci_dev(hwif->dev);
 	int dshift = (drive->dn & 1) ? IDE_D1_SHIFT : IDE_D0_SHIFT;
 	unsigned long timings = (unsigned long)ide_get_drivedata(drive);
 	u32 etc;
+	const u8 mode = drive->dma_mode;
 
 	cs5536_read(pdev, ETC, &etc);
 
diff --git a/drivers/ide/cy82c693.c b/drivers/ide/cy82c693.c
index ead65c394f00..9383f67deae1 100644
--- a/drivers/ide/cy82c693.c
+++ b/drivers/ide/cy82c693.c
@@ -53,9 +53,9 @@
  * set DMA mode a specific channel for CY82C693
  */
 
-static void cy82c693_set_dma_mode(ide_drive_t *drive, const u8 mode)
+static void cy82c693_set_dma_mode(ide_hwif_t *hwif, ide_drive_t *drive)
 {
-	ide_hwif_t *hwif = drive->hwif;
+	const u8 mode = drive->dma_mode;
 	u8 single = (mode & 0x10) >> 4, index = 0, data = 0;
 
 	index = hwif->channel ? CY82_INDEX_CHANNEL1 : CY82_INDEX_CHANNEL0;
diff --git a/drivers/ide/hpt366.c b/drivers/ide/hpt366.c
index f1dec519a9e6..b885c1d548f5 100644
--- a/drivers/ide/hpt366.c
+++ b/drivers/ide/hpt366.c
@@ -627,14 +627,14 @@ static u32 get_speed_setting(u8 speed, struct hpt_info *info)
 	return info->timings->clock_table[info->clock][i];
 }
 
-static void hpt3xx_set_mode(ide_drive_t *drive, const u8 speed)
+static void hpt3xx_set_mode(ide_hwif_t *hwif, ide_drive_t *drive)
 {
-	ide_hwif_t *hwif	= drive->hwif;
 	struct pci_dev *dev	= to_pci_dev(hwif->dev);
 	struct hpt_info *info	= hpt3xx_get_info(hwif->dev);
 	struct hpt_timings *t	= info->timings;
 	u8  itr_addr		= 0x40 + (drive->dn * 4);
 	u32 old_itr		= 0;
+	const u8 speed		= drive->dma_mode;
 	u32 new_itr		= get_speed_setting(speed, info);
 	u32 itr_mask		= speed < XFER_MW_DMA_0 ? t->pio_mask :
 				 (speed < XFER_UDMA_0   ? t->dma_mask :
@@ -653,7 +653,8 @@ static void hpt3xx_set_mode(ide_drive_t *drive, const u8 speed)
 
 static void hpt3xx_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive)
 {
-	hpt3xx_set_mode(drive, drive->pio_mode);
+	drive->dma_mode = drive->pio_mode;
+	hpt3xx_set_mode(hwif, drive);
 }
 
 static void hpt3xx_maskproc(ide_drive_t *drive, int mask)
diff --git a/drivers/ide/icside.c b/drivers/ide/icside.c
index 0f67f1abbbd3..26b6c0a1f772 100644
--- a/drivers/ide/icside.c
+++ b/drivers/ide/icside.c
@@ -185,10 +185,11 @@ static const expansioncard_ops_t icside_ops_arcin_v6 = {
  *	MW1	80	50	50	150	C
  *	MW2	70	25	25	120	C
  */
-static void icside_set_dma_mode(ide_drive_t *drive, const u8 xfer_mode)
+static void icside_set_dma_mode(ide_hwif_t *hwif, ide_drive_t *drive)
 {
 	unsigned long cycle_time;
 	int use_dma_info = 0;
+	const u8 xfer_mode = drive->dma_mode;
 
 	switch (xfer_mode) {
 	case XFER_MW_DMA_2:
diff --git a/drivers/ide/ide-xfer-mode.c b/drivers/ide/ide-xfer-mode.c
index a62fb03fc1cc..9b549e4d1848 100644
--- a/drivers/ide/ide-xfer-mode.c
+++ b/drivers/ide/ide-xfer-mode.c
@@ -168,11 +168,11 @@ int ide_set_dma_mode(ide_drive_t *drive, const u8 mode)
 		if (ide_config_drive_speed(drive, mode))
 			return -1;
 		drive->dma_mode = mode;
-		port_ops->set_dma_mode(drive, mode);
+		port_ops->set_dma_mode(hwif, drive);
 		return 0;
 	} else {
 		drive->dma_mode = mode;
-		port_ops->set_dma_mode(drive, mode);
+		port_ops->set_dma_mode(hwif, drive);
 		return ide_config_drive_speed(drive, mode);
 	}
 }
diff --git a/drivers/ide/it8172.c b/drivers/ide/it8172.c
index 9dfdc8741a7b..560e66d07659 100644
--- a/drivers/ide/it8172.c
+++ b/drivers/ide/it8172.c
@@ -77,14 +77,14 @@ static void it8172_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive)
 	pci_write_config_dword(dev, 0x44, drive_timing);
 }
 
-static void it8172_set_dma_mode(ide_drive_t *drive, const u8 speed)
+static void it8172_set_dma_mode(ide_hwif_t *hwif, ide_drive_t *drive)
 {
-	ide_hwif_t *hwif	= drive->hwif;
 	struct pci_dev *dev	= to_pci_dev(hwif->dev);
 	int a_speed		= 3 << (drive->dn * 4);
 	int u_flag		= 1 << drive->dn;
 	int u_speed		= 0;
 	u8 reg48, reg4a;
+	const u8 speed		= drive->dma_mode;
 
 	pci_read_config_byte(dev, 0x48, &reg48);
 	pci_read_config_byte(dev, 0x4a, &reg4a);
diff --git a/drivers/ide/it8213.c b/drivers/ide/it8213.c
index 492c07d5f4f3..46816ba26416 100644
--- a/drivers/ide/it8213.c
+++ b/drivers/ide/it8213.c
@@ -74,15 +74,14 @@ static void it8213_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive)
 
 /**
  *	it8213_set_dma_mode	-	set host controller for DMA mode
+ *	@hwif: port
  *	@drive: drive
- *	@speed: DMA mode
  *
  *	Tune the ITE chipset for the DMA mode.
  */
 
-static void it8213_set_dma_mode(ide_drive_t *drive, const u8 speed)
+static void it8213_set_dma_mode(ide_hwif_t *hwif, ide_drive_t *drive)
 {
-	ide_hwif_t *hwif	= drive->hwif;
 	struct pci_dev *dev	= to_pci_dev(hwif->dev);
 	u8 maslave		= 0x40;
 	int a_speed		= 3 << (drive->dn * 4);
@@ -92,6 +91,7 @@ static void it8213_set_dma_mode(ide_drive_t *drive, const u8 speed)
 	int u_speed		= 0;
 	u16			reg4042, reg4a;
 	u8			reg48, reg54, reg55;
+	const u8 speed		= drive->dma_mode;
 
 	pci_read_config_word(dev, maslave, &reg4042);
 	pci_read_config_byte(dev, 0x48, &reg48);
diff --git a/drivers/ide/it821x.c b/drivers/ide/it821x.c
index 69becb7b9656..56b79194156b 100644
--- a/drivers/ide/it821x.c
+++ b/drivers/ide/it821x.c
@@ -393,14 +393,16 @@ static int it821x_dma_end(ide_drive_t *drive)
 
 /**
  *	it821x_set_dma_mode	-	set host controller for DMA mode
+ *	@hwif: port
  *	@drive: drive
- *	@speed: DMA mode
  *
  *	Tune the ITE chipset for the desired DMA mode.
  */
 
-static void it821x_set_dma_mode(ide_drive_t *drive, const u8 speed)
+static void it821x_set_dma_mode(ide_hwif_t *hwif, ide_drive_t *drive)
 {
+	const u8 speed = drive->dma_mode;
+
 	/*
 	 * MWDMA tuning is really hard because our MWDMA and PIO
 	 * timings are kept in the same place.  We can switch in the
diff --git a/drivers/ide/jmicron.c b/drivers/ide/jmicron.c
index ebffb904ed24..74c2c4a6d909 100644
--- a/drivers/ide/jmicron.c
+++ b/drivers/ide/jmicron.c
@@ -86,13 +86,13 @@ static void jmicron_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive)
 
 /**
  *	jmicron_set_dma_mode	-	set host controller for DMA mode
+ *	@hwif: port
  *	@drive: drive
- *	@mode: DMA mode
  *
  *	As the JMicron snoops for timings we don't need to do anything here.
  */
 
-static void jmicron_set_dma_mode(ide_drive_t *drive, const u8 mode)
+static void jmicron_set_dma_mode(ide_hwif_t *hwif, ide_drive_t *drive)
 {
 }
 
diff --git a/drivers/ide/palm_bk3710.c b/drivers/ide/palm_bk3710.c
index 0f262d07c378..35448c91b8c8 100644
--- a/drivers/ide/palm_bk3710.c
+++ b/drivers/ide/palm_bk3710.c
@@ -188,10 +188,11 @@ static void palm_bk3710_setpiomode(void __iomem *base, ide_drive_t *mate,
 	writel(val32, base + BK3710_REGRCVR);
 }
 
-static void palm_bk3710_set_dma_mode(ide_drive_t *drive, u8 xferspeed)
+static void palm_bk3710_set_dma_mode(ide_hwif_t *hwif, ide_drive_t *drive)
 {
 	int is_slave = drive->dn & 1;
-	void __iomem *base = (void *)drive->hwif->dma_base;
+	void __iomem *base = (void *)hwif->dma_base;
+	const u8 xferspeed = drive->dma_mode;
 
 	if (xferspeed >= XFER_UDMA_0) {
 		palm_bk3710_setudmamode(base, is_slave,
diff --git a/drivers/ide/pdc202xx_new.c b/drivers/ide/pdc202xx_new.c
index 874acd2bb6e6..9546fe2a93f7 100644
--- a/drivers/ide/pdc202xx_new.c
+++ b/drivers/ide/pdc202xx_new.c
@@ -129,11 +129,11 @@ static struct udma_timing {
 	{ 0x1a, 0x01, 0xcb },	/* UDMA mode 6 */
 };
 
-static void pdcnew_set_dma_mode(ide_drive_t *drive, const u8 speed)
+static void pdcnew_set_dma_mode(ide_hwif_t *hwif, ide_drive_t *drive)
 {
-	ide_hwif_t *hwif	= drive->hwif;
 	struct pci_dev *dev	= to_pci_dev(hwif->dev);
 	u8 adj			= (drive->dn & 1) ? 0x08 : 0x00;
+	const u8 speed		= drive->dma_mode;
 
 	/*
 	 * IDE core issues SETFEATURES_XFER to the drive first (thanks to
diff --git a/drivers/ide/pdc202xx_old.c b/drivers/ide/pdc202xx_old.c
index 402aab7f3baa..07cd37516ba6 100644
--- a/drivers/ide/pdc202xx_old.c
+++ b/drivers/ide/pdc202xx_old.c
@@ -21,11 +21,11 @@
 
 #define DRV_NAME "pdc202xx_old"
 
-static void pdc202xx_set_mode(ide_drive_t *drive, const u8 speed)
+static void pdc202xx_set_mode(ide_hwif_t *hwif, ide_drive_t *drive)
 {
-	ide_hwif_t *hwif	= drive->hwif;
 	struct pci_dev *dev	= to_pci_dev(hwif->dev);
 	u8 drive_pci		= 0x60 + (drive->dn << 2);
+	const u8 speed		= drive->dma_mode;
 
 	u8			AP = 0, BP = 0, CP = 0;
 	u8			TA = 0, TB = 0, TC = 0;
@@ -78,7 +78,8 @@ static void pdc202xx_set_mode(ide_drive_t *drive, const u8 speed)
 
 static void pdc202xx_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive)
 {
-	pdc202xx_set_mode(drive, drive->pio_mode);
+	drive->dma_mode = drive->pio_mode;
+	pdc202xx_set_mode(hwif, drive);
 }
 
 static int pdc202xx_test_irq(ide_hwif_t *hwif)
diff --git a/drivers/ide/piix.c b/drivers/ide/piix.c
index 64b3041daa60..1bdca49e5a03 100644
--- a/drivers/ide/piix.c
+++ b/drivers/ide/piix.c
@@ -127,16 +127,15 @@ static void piix_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive)
 
 /**
  *	piix_set_dma_mode	-	set host controller for DMA mode
+ *	@hwif: port
  *	@drive: drive
- *	@speed: DMA mode
  *
  *	Set a PIIX host controller to the desired DMA mode.  This involves
  *	programming the right timing data into the PCI configuration space.
  */
 
-static void piix_set_dma_mode(ide_drive_t *drive, const u8 speed)
+static void piix_set_dma_mode(ide_hwif_t *hwif, ide_drive_t *drive)
 {
-	ide_hwif_t *hwif	= drive->hwif;
 	struct pci_dev *dev	= to_pci_dev(hwif->dev);
 	u8 maslave		= hwif->channel ? 0x42 : 0x40;
 	int a_speed		= 3 << (drive->dn * 4);
@@ -147,6 +146,7 @@ static void piix_set_dma_mode(ide_drive_t *drive, const u8 speed)
 	int			sitre;
 	u16			reg4042, reg4a;
 	u8			reg48, reg54, reg55;
+	const u8 speed		= drive->dma_mode;
 
 	pci_read_config_word(dev, maslave, &reg4042);
 	sitre = (reg4042 & 0x4000) ? 1 : 0;
diff --git a/drivers/ide/pmac.c b/drivers/ide/pmac.c
index a167968a2d42..9fae1fb1468b 100644
--- a/drivers/ide/pmac.c
+++ b/drivers/ide/pmac.c
@@ -777,14 +777,14 @@ set_timings_mdma(ide_drive_t *drive, int intf_type, u32 *timings, u32 *timings2,
 #endif	
 }
 
-static void pmac_ide_set_dma_mode(ide_drive_t *drive, const u8 speed)
+static void pmac_ide_set_dma_mode(ide_hwif_t *hwif, ide_drive_t *drive)
 {
-	ide_hwif_t *hwif = drive->hwif;
 	pmac_ide_hwif_t *pmif =
 		(pmac_ide_hwif_t *)dev_get_drvdata(hwif->gendev.parent);
 	int ret = 0;
 	u32 *timings, *timings2, tl[2];
 	u8 unit = drive->dn & 1;
+	const u8 speed = drive->dma_mode;
 
 	timings = &pmif->timings[unit];
 	timings2 = &pmif->timings[unit+2];
diff --git a/drivers/ide/sc1200.c b/drivers/ide/sc1200.c
index bb0166e460ab..134f1fd13866 100644
--- a/drivers/ide/sc1200.c
+++ b/drivers/ide/sc1200.c
@@ -122,13 +122,13 @@ out:
 	return mask;
 }
 
-static void sc1200_set_dma_mode(ide_drive_t *drive, const u8 mode)
+static void sc1200_set_dma_mode(ide_hwif_t *hwif, ide_drive_t *drive)
 {
-	ide_hwif_t		*hwif = drive->hwif;
 	struct pci_dev		*dev = to_pci_dev(hwif->dev);
 	unsigned int		reg, timings;
 	unsigned short		pci_clock;
 	unsigned int		basereg = hwif->channel ? 0x50 : 0x40;
+	const u8		mode = drive->dma_mode;
 
 	static const u32 udma_timing[3][3] = {
 		{ 0x00921250, 0x00911140, 0x00911030 },
diff --git a/drivers/ide/scc_pata.c b/drivers/ide/scc_pata.c
index 23e16e4460ee..e9d4b441d1c3 100644
--- a/drivers/ide/scc_pata.c
+++ b/drivers/ide/scc_pata.c
@@ -231,16 +231,15 @@ static void scc_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive)
 
 /**
  *	scc_set_dma_mode	-	set host controller for DMA mode
+ *	@hwif: port
  *	@drive: drive
- *	@speed: DMA mode
  *
  *	Load the timing settings for this device mode into the
  *	controller.
  */
 
-static void scc_set_dma_mode(ide_drive_t *drive, const u8 speed)
+static void scc_set_dma_mode(ide_hwif_t *hwif, ide_drive_t *drive)
 {
-	ide_hwif_t *hwif = drive->hwif;
 	struct scc_ports *ports = ide_get_hwifdata(hwif);
 	unsigned long ctl_base = ports->ctl;
 	unsigned long cckctrl_port = ctl_base + 0xff0;
@@ -254,6 +253,7 @@ static void scc_set_dma_mode(ide_drive_t *drive, const u8 speed)
 	int offset, idx;
 	unsigned long reg;
 	unsigned long jcactsel;
+	const u8 speed = drive->dma_mode;
 
 	reg = in_be32((void __iomem *)cckctrl_port);
 	if (reg & CCKCTRL_ATACLKOEN) {
diff --git a/drivers/ide/serverworks.c b/drivers/ide/serverworks.c
index a56bc51ae032..35fb8dabb55d 100644
--- a/drivers/ide/serverworks.c
+++ b/drivers/ide/serverworks.c
@@ -128,14 +128,14 @@ static void svwks_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive)
 	}
 }
 
-static void svwks_set_dma_mode(ide_drive_t *drive, const u8 speed)
+static void svwks_set_dma_mode(ide_hwif_t *hwif, ide_drive_t *drive)
 {
 	static const u8 udma_modes[]		= { 0x00, 0x01, 0x02, 0x03, 0x04, 0x05 };
 	static const u8 dma_modes[]		= { 0x77, 0x21, 0x20 };
 	static const u8 drive_pci2[]		= { 0x45, 0x44, 0x47, 0x46 };
 
-	ide_hwif_t *hwif	= drive->hwif;
 	struct pci_dev *dev	= to_pci_dev(hwif->dev);
+	const u8 speed		= drive->dma_mode;
 	u8 unit			= drive->dn & 1;
 
 	u8 ultra_enable	 = 0, ultra_timing = 0, dma_timing = 0;
diff --git a/drivers/ide/sgiioc4.c b/drivers/ide/sgiioc4.c
index b7d61dc64096..e3ea591f66d3 100644
--- a/drivers/ide/sgiioc4.c
+++ b/drivers/ide/sgiioc4.c
@@ -255,7 +255,7 @@ static int sgiioc4_dma_end(ide_drive_t *drive)
 	return dma_stat;
 }
 
-static void sgiioc4_set_dma_mode(ide_drive_t *drive, const u8 speed)
+static void sgiioc4_set_dma_mode(ide_hwif_t *hwif, ide_drive_t *drive)
 {
 }
 
diff --git a/drivers/ide/siimage.c b/drivers/ide/siimage.c
index 97266958f744..2009ac2ff658 100644
--- a/drivers/ide/siimage.c
+++ b/drivers/ide/siimage.c
@@ -289,19 +289,18 @@ static void sil_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive)
 
 /**
  *	sil_set_dma_mode	-	set host controller for DMA mode
+ *	@hwif: port
  *	@drive: drive
- *	@speed: DMA mode
  *
  *	Tune the SiI chipset for the desired DMA mode.
  */
 
-static void sil_set_dma_mode(ide_drive_t *drive, const u8 speed)
+static void sil_set_dma_mode(ide_hwif_t *hwif, ide_drive_t *drive)
 {
 	static const u8 ultra6[] = { 0x0F, 0x0B, 0x07, 0x05, 0x03, 0x02, 0x01 };
 	static const u8 ultra5[] = { 0x0C, 0x07, 0x05, 0x04, 0x02, 0x01 };
 	static const u16 dma[]	 = { 0x2208, 0x10C2, 0x10C1 };
 
-	ide_hwif_t *hwif	= drive->hwif;
 	struct pci_dev *dev	= to_pci_dev(hwif->dev);
 	unsigned long base	= (unsigned long)hwif->hwif_data;
 	u16 ultra = 0, multi	= 0;
@@ -311,6 +310,7 @@ static void sil_set_dma_mode(ide_drive_t *drive, const u8 speed)
 						: (mmio ? 0xB4 : 0x80);
 	unsigned long ma	= siimage_seldev(drive, 0x08);
 	unsigned long ua	= siimage_seldev(drive, 0x0C);
+	const u8 speed		= drive->dma_mode;
 
 	scsc  = sil_ioread8 (dev, base + (mmio ? 0x4A : 0x8A));
 	mode  = sil_ioread8 (dev, base + addr_mask);
diff --git a/drivers/ide/sis5513.c b/drivers/ide/sis5513.c
index 5a0192060531..db7f4e761dbc 100644
--- a/drivers/ide/sis5513.c
+++ b/drivers/ide/sis5513.c
@@ -340,8 +340,10 @@ static void sis_program_udma_timings(ide_drive_t *drive, const u8 mode)
 		sis_ata33_program_udma_timings(drive, mode);
 }
 
-static void sis_set_dma_mode(ide_drive_t *drive, const u8 speed)
+static void sis_set_dma_mode(ide_hwif_t *hwif, ide_drive_t *drive)
 {
+	const u8 speed = drive->dma_mode;
+
 	if (speed >= XFER_UDMA_0)
 		sis_program_udma_timings(drive, speed);
 	else
diff --git a/drivers/ide/sl82c105.c b/drivers/ide/sl82c105.c
index 419cd3bc6c84..f21dc2ad7682 100644
--- a/drivers/ide/sl82c105.c
+++ b/drivers/ide/sl82c105.c
@@ -92,11 +92,12 @@ static void sl82c105_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive)
 /*
  * Configure the chipset for DMA mode.
  */
-static void sl82c105_set_dma_mode(ide_drive_t *drive, const u8 speed)
+static void sl82c105_set_dma_mode(ide_hwif_t *hwif, ide_drive_t *drive)
 {
 	static u16 mwdma_timings[] = {0x0707, 0x0201, 0x0200};
 	unsigned long timings = (unsigned long)ide_get_drivedata(drive);
 	u16 drv_ctrl;
+	const u8 speed = drive->dma_mode;
 
 	drv_ctrl = mwdma_timings[speed - XFER_MW_DMA_0];
 
diff --git a/drivers/ide/slc90e66.c b/drivers/ide/slc90e66.c
index 019777522cd2..864ffe0e26d9 100644
--- a/drivers/ide/slc90e66.c
+++ b/drivers/ide/slc90e66.c
@@ -72,14 +72,14 @@ static void slc90e66_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive)
 	spin_unlock_irqrestore(&slc90e66_lock, flags);
 }
 
-static void slc90e66_set_dma_mode(ide_drive_t *drive, const u8 speed)
+static void slc90e66_set_dma_mode(ide_hwif_t *hwif, ide_drive_t *drive)
 {
-	ide_hwif_t *hwif	= drive->hwif;
 	struct pci_dev *dev	= to_pci_dev(hwif->dev);
 	u8 maslave		= hwif->channel ? 0x42 : 0x40;
 	int sitre = 0, a_speed	= 7 << (drive->dn * 4);
 	int u_speed = 0, u_flag = 1 << drive->dn;
 	u16			reg4042, reg44, reg48, reg4a;
+	const u8 speed		= drive->dma_mode;
 
 	pci_read_config_word(dev, maslave, &reg4042);
 	sitre = (reg4042 & 0x4000) ? 1 : 0;
diff --git a/drivers/ide/tc86c001.c b/drivers/ide/tc86c001.c
index f2cb62bf3f22..e444d24934b3 100644
--- a/drivers/ide/tc86c001.c
+++ b/drivers/ide/tc86c001.c
@@ -13,11 +13,11 @@
 
 #define DRV_NAME "tc86c001"
 
-static void tc86c001_set_mode(ide_drive_t *drive, const u8 speed)
+static void tc86c001_set_mode(ide_hwif_t *hwif, ide_drive_t *drive)
 {
-	ide_hwif_t *hwif	= drive->hwif;
 	unsigned long scr_port	= hwif->config_data + (drive->dn ? 0x02 : 0x00);
 	u16 mode, scr		= inw(scr_port);
+	const u8 speed		= drive->dma_mode;
 
 	switch (speed) {
 	case XFER_UDMA_4:	mode = 0x00c0; break;
@@ -43,7 +43,8 @@ static void tc86c001_set_mode(ide_drive_t *drive, const u8 speed)
 
 static void tc86c001_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive)
 {
-	tc86c001_set_mode(drive, drive->pio_mode);
+	drive->dma_mode = drive->pio_mode;
+	tc86c001_set_mode(hwif, drive);
 }
 
 /*
diff --git a/drivers/ide/triflex.c b/drivers/ide/triflex.c
index d34a7eecdea5..7953447eae0f 100644
--- a/drivers/ide/triflex.c
+++ b/drivers/ide/triflex.c
@@ -34,9 +34,8 @@
 
 #define DRV_NAME "triflex"
 
-static void triflex_set_mode(ide_drive_t *drive, const u8 speed)
+static void triflex_set_mode(ide_hwif_t *hwif, ide_drive_t *drive)
 {
-	ide_hwif_t *hwif = drive->hwif;
 	struct pci_dev *dev = to_pci_dev(hwif->dev);
 	u32 triflex_timings = 0;
 	u16 timing = 0;
@@ -44,7 +43,7 @@ static void triflex_set_mode(ide_drive_t *drive, const u8 speed)
 
 	pci_read_config_dword(dev, channel_offset, &triflex_timings);
 
-	switch(speed) {
+	switch (drive->dma_mode) {
 		case XFER_MW_DMA_2:
 			timing = 0x0103; 
 			break;
@@ -84,7 +83,8 @@ static void triflex_set_mode(ide_drive_t *drive, const u8 speed)
 
 static void triflex_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive)
 {
-	triflex_set_mode(drive, drive->pio_mode);
+	drive->dma_mode = drive->pio_mode;
+	triflex_set_mode(hwif, drive);
 }
 
 static const struct ide_port_ops triflex_port_ops = {
diff --git a/drivers/ide/tx4939ide.c b/drivers/ide/tx4939ide.c
index 5228a4786de5..f210633a3d57 100644
--- a/drivers/ide/tx4939ide.c
+++ b/drivers/ide/tx4939ide.c
@@ -125,10 +125,10 @@ static void tx4939ide_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive)
 	/* tx4939ide_tf_load_fixup() will set the Sys_Ctl register */
 }
 
-static void tx4939ide_set_dma_mode(ide_drive_t *drive, const u8 mode)
+static void tx4939ide_set_dma_mode(ide_hwif_t *hwif, ide_drive_t *drive)
 {
-	ide_hwif_t *hwif = drive->hwif;
 	u32 mask, val;
+	const u8 mode = drive->dma_mode;
 
 	/* Update Data Transfer Mode for this drive. */
 	if (mode >= XFER_UDMA_0)
diff --git a/drivers/ide/via82cxxx.c b/drivers/ide/via82cxxx.c
index 6d995fc9d4f5..6769fe252b07 100644
--- a/drivers/ide/via82cxxx.c
+++ b/drivers/ide/via82cxxx.c
@@ -169,22 +169,22 @@ static void via_set_speed(ide_hwif_t *hwif, u8 dn, struct ide_timing *timing)
 
 /**
  *	via_set_drive		-	configure transfer mode
+ *	@hwif: port
  *	@drive: Drive to set up
- *	@speed: desired speed
  *
  *	via_set_drive() computes timing values configures the chipset to
  *	a desired transfer mode.  It also can be called by upper layers.
  */
 
-static void via_set_drive(ide_drive_t *drive, const u8 speed)
+static void via_set_drive(ide_hwif_t *hwif, ide_drive_t *drive)
 {
-	ide_hwif_t *hwif = drive->hwif;
 	ide_drive_t *peer = ide_get_pair_dev(drive);
 	struct pci_dev *dev = to_pci_dev(hwif->dev);
 	struct ide_host *host = pci_get_drvdata(dev);
 	struct via82cxxx_dev *vdev = host->host_priv;
 	struct ide_timing t, p;
 	unsigned int T, UT;
+	const u8 speed = drive->dma_mode;
 
 	T = 1000000000 / via_clock;
 
@@ -216,7 +216,8 @@ static void via_set_drive(ide_drive_t *drive, const u8 speed)
 
 static void via_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive)
 {
-	via_set_drive(drive, drive->pio_mode);
+	drive->dma_mode = drive->pio_mode;
+	via_set_drive(hwif, drive);
 }
 
 static struct via_isa_bridge *via_config_find(struct pci_dev **isa)
diff --git a/include/linux/ide.h b/include/linux/ide.h
index 803ec306883c..53ecdba82d72 100644
--- a/include/linux/ide.h
+++ b/include/linux/ide.h
@@ -625,7 +625,7 @@ extern const struct ide_tp_ops default_tp_ops;
 struct ide_port_ops {
 	void	(*init_dev)(ide_drive_t *);
 	void	(*set_pio_mode)(struct hwif_s *, ide_drive_t *);
-	void	(*set_dma_mode)(ide_drive_t *, const u8);
+	void	(*set_dma_mode)(struct hwif_s *, ide_drive_t *);
 	int	(*reset_poll)(ide_drive_t *);
 	void	(*pre_reset)(ide_drive_t *);
 	void	(*resetproc)(ide_drive_t *);
-- 
cgit v1.2.3-59-g8ed1b


From 8e714a074bc4da070807d019d4287dcd32af55f5 Mon Sep 17 00:00:00 2001
From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Date: Tue, 19 Jan 2010 01:47:29 -0800
Subject: ide-timings: use ->pio_mode value to determine fastest PIO speed

Use the current PIO mode value instead of the physical maximum one
to determine the fastest allowed PIO for shared PIO/DMA timings.

Affected host drivers: amd74xx and via82cxxx.

[ Update comment to match -DaveM ]

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/ide/ide-timings.c | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

(limited to 'drivers')

diff --git a/drivers/ide/ide-timings.c b/drivers/ide/ide-timings.c
index c6053ab2b6c6..c7a65ee72310 100644
--- a/drivers/ide/ide-timings.c
+++ b/drivers/ide/ide-timings.c
@@ -186,11 +186,10 @@ int ide_timing_compute(ide_drive_t *drive, u8 speed,
 	/*
 	 * Even in DMA/UDMA modes we still use PIO access for IDENTIFY,
 	 * S.M.A.R.T and some other commands. We have to ensure that the
-	 * DMA cycle timing is slower/equal than the fastest PIO timing.
+	 * DMA cycle timing is slower/equal than the current PIO timing.
 	 */
 	if (speed >= XFER_SW_DMA_0) {
-		u8 pio = ide_get_best_pio_mode(drive, 255, 5);
-		ide_timing_compute(drive, XFER_PIO_0 + pio, &p, T, UT);
+		ide_timing_compute(drive, drive->pio_mode, &p, T, UT);
 		ide_timing_merge(&p, t, t, IDE_TIMING_ALL);
 	}
 
-- 
cgit v1.2.3-59-g8ed1b


From cde727be967a86aee01042f35c8a861728272cf1 Mon Sep 17 00:00:00 2001
From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Date: Mon, 18 Jan 2010 07:21:05 +0000
Subject: alim15x3: fix handling of address setup timings

Account for the requirements of the other device on the port.

Based on libata pata_ali host driver.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/ide/alim15x3.c | 11 +++++++++++
 1 file changed, 11 insertions(+)

(limited to 'drivers')

diff --git a/drivers/ide/alim15x3.c b/drivers/ide/alim15x3.c
index 6f0debae4e27..8e29801bbeb0 100644
--- a/drivers/ide/alim15x3.c
+++ b/drivers/ide/alim15x3.c
@@ -72,6 +72,7 @@ static void ali_fifo_control(ide_hwif_t *hwif, ide_drive_t *drive, int on)
 static void ali_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive)
 {
 	struct pci_dev *dev = to_pci_dev(hwif->dev);
+	ide_drive_t *pair = ide_get_pair_dev(drive);
 	int bus_speed = ide_pci_clk ? ide_pci_clk : 33;
 	unsigned long T =  1000000 / bus_speed; /* PCI clock based */
 	int port = hwif->channel ? 0x5c : 0x58;
@@ -79,6 +80,16 @@ static void ali_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive)
 	struct ide_timing t;
 
 	ide_timing_compute(drive, drive->pio_mode, &t, T, 1);
+	if (pair) {
+		struct ide_timing p;
+
+		ide_timing_compute(pair, pair->pio_mode, &p, T, 1);
+		ide_timing_merge(&p, &t, &t, IDE_TIMING_SETUP);
+		if (pair->dma_mode) {
+			ide_timing_compute(pair, pair->dma_mode, &p, T, 1);
+			ide_timing_merge(&p, &t, &t, IDE_TIMING_SETUP);
+		}
+	}
 
 	t.setup = clamp_val(t.setup, 1, 8) & 7;
 	t.active = clamp_val(t.active, 1, 8) & 7;
-- 
cgit v1.2.3-59-g8ed1b


From 5740345b877e2c8745cdf454674b45919679f231 Mon Sep 17 00:00:00 2001
From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Date: Mon, 18 Jan 2010 07:21:12 +0000
Subject: alim15x3: fix handling of command timings

Stop depending on the BIOS setup.

Based on libata pata_ali host driver.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/ide/alim15x3.c | 9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)

(limited to 'drivers')

diff --git a/drivers/ide/alim15x3.c b/drivers/ide/alim15x3.c
index 8e29801bbeb0..529f8e2218ac 100644
--- a/drivers/ide/alim15x3.c
+++ b/drivers/ide/alim15x3.c
@@ -84,14 +84,18 @@ static void ali_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive)
 		struct ide_timing p;
 
 		ide_timing_compute(pair, pair->pio_mode, &p, T, 1);
-		ide_timing_merge(&p, &t, &t, IDE_TIMING_SETUP);
+		ide_timing_merge(&p, &t, &t,
+			IDE_TIMING_SETUP | IDE_TIMING_8BIT);
 		if (pair->dma_mode) {
 			ide_timing_compute(pair, pair->dma_mode, &p, T, 1);
-			ide_timing_merge(&p, &t, &t, IDE_TIMING_SETUP);
+			ide_timing_merge(&p, &t, &t,
+				IDE_TIMING_SETUP | IDE_TIMING_8BIT);
 		}
 	}
 
 	t.setup = clamp_val(t.setup, 1, 8) & 7;
+	t.act8b = clamp_val(t.act8b, 1, 8) & 7;
+	t.rec8b = clamp_val(t.rec8b, 1, 16) & 15;
 	t.active = clamp_val(t.active, 1, 8) & 7;
 	t.recover = clamp_val(t.recover, 1, 16) & 15;
 
@@ -101,6 +105,7 @@ static void ali_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive)
 	ali_fifo_control(hwif, drive, (drive->media == ide_disk) ? 0x05 : 0x00);
 
 	pci_write_config_byte(dev, port, t.setup);
+	pci_write_config_byte(dev, port + 1, (t.act8b << 4) | t.rec8b);
 	pci_write_config_byte(dev, port + unit + 2,
 			      (t.active << 4) | t.recover);
 }
-- 
cgit v1.2.3-59-g8ed1b


From a345c7856e52bf8b21a5ae6a24fb824bfedefbe9 Mon Sep 17 00:00:00 2001
From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Date: Mon, 18 Jan 2010 07:21:19 +0000
Subject: alim15x3: fix handling of DMA timings

Stop depending on the BIOS setup.

Based on libata pata_ali host driver.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/ide/alim15x3.c | 55 +++++++++++++++++++++++++++++++++++---------------
 1 file changed, 39 insertions(+), 16 deletions(-)

(limited to 'drivers')

diff --git a/drivers/ide/alim15x3.c b/drivers/ide/alim15x3.c
index 529f8e2218ac..3ba7d0bdd25d 100644
--- a/drivers/ide/alim15x3.c
+++ b/drivers/ide/alim15x3.c
@@ -61,6 +61,25 @@ static void ali_fifo_control(ide_hwif_t *hwif, ide_drive_t *drive, int on)
 	pci_write_config_byte(pdev, pio_fifo, fifo);
 }
 
+static void ali_program_timings(ide_hwif_t *hwif, ide_drive_t *drive,
+				struct ide_timing *t)
+{
+	struct pci_dev *dev = to_pci_dev(hwif->dev);
+	int port = hwif->channel ? 0x5c : 0x58;
+	u8 unit = drive->dn & 1;
+
+	t->setup = clamp_val(t->setup, 1, 8) & 7;
+	t->act8b = clamp_val(t->act8b, 1, 8) & 7;
+	t->rec8b = clamp_val(t->rec8b, 1, 16) & 15;
+	t->active = clamp_val(t->active, 1, 8) & 7;
+	t->recover = clamp_val(t->recover, 1, 16) & 15;
+
+	pci_write_config_byte(dev, port, t->setup);
+	pci_write_config_byte(dev, port + 1, (t->act8b << 4) | t->rec8b);
+	pci_write_config_byte(dev, port + unit + 2,
+			      (t->active << 4) | t->recover);
+}
+
 /**
  *	ali_set_pio_mode	-	set host controller for PIO mode
  *	@hwif: port
@@ -71,12 +90,9 @@ static void ali_fifo_control(ide_hwif_t *hwif, ide_drive_t *drive, int on)
 
 static void ali_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive)
 {
-	struct pci_dev *dev = to_pci_dev(hwif->dev);
 	ide_drive_t *pair = ide_get_pair_dev(drive);
 	int bus_speed = ide_pci_clk ? ide_pci_clk : 33;
 	unsigned long T =  1000000 / bus_speed; /* PCI clock based */
-	int port = hwif->channel ? 0x5c : 0x58;
-	u8 unit = drive->dn & 1;
 	struct ide_timing t;
 
 	ide_timing_compute(drive, drive->pio_mode, &t, T, 1);
@@ -93,21 +109,12 @@ static void ali_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive)
 		}
 	}
 
-	t.setup = clamp_val(t.setup, 1, 8) & 7;
-	t.act8b = clamp_val(t.act8b, 1, 8) & 7;
-	t.rec8b = clamp_val(t.rec8b, 1, 16) & 15;
-	t.active = clamp_val(t.active, 1, 8) & 7;
-	t.recover = clamp_val(t.recover, 1, 16) & 15;
-
 	/* 
 	 * PIO mode => ATA FIFO on, ATAPI FIFO off
 	 */
 	ali_fifo_control(hwif, drive, (drive->media == ide_disk) ? 0x05 : 0x00);
 
-	pci_write_config_byte(dev, port, t.setup);
-	pci_write_config_byte(dev, port + 1, (t.act8b << 4) | t.rec8b);
-	pci_write_config_byte(dev, port + unit + 2,
-			      (t.active << 4) | t.recover);
+	ali_program_timings(hwif, drive, &t);
 }
 
 /**
@@ -146,11 +153,15 @@ static u8 ali_udma_filter(ide_drive_t *drive)
 static void ali_set_dma_mode(ide_hwif_t *hwif, ide_drive_t *drive)
 {
 	struct pci_dev *dev	= to_pci_dev(hwif->dev);
+	ide_drive_t *pair	= ide_get_pair_dev(drive);
+	int bus_speed		= ide_pci_clk ? ide_pci_clk : 33;
+	unsigned long T		=  1000000 / bus_speed; /* PCI clock based */
 	const u8 speed		= drive->dma_mode;
 	u8 speed1		= speed;
 	u8 unit			= drive->dn & 1;
 	u8 tmpbyte		= 0x00;
 	int m5229_udma		= (hwif->channel) ? 0x57 : 0x56;
+	struct ide_timing t;
 
 	if (speed == XFER_UDMA_6)
 		speed1 = 0x47;
@@ -164,9 +175,21 @@ static void ali_set_dma_mode(ide_hwif_t *hwif, ide_drive_t *drive)
 		tmpbyte &= ultra_enable;
 		pci_write_config_byte(dev, m5229_udma, tmpbyte);
 
-		/*
-		 * FIXME: Oh, my... DMA timings are never set.
-		 */
+		ide_timing_compute(drive, drive->dma_mode, &t, T, 1);
+		if (pair) {
+			struct ide_timing p;
+
+			ide_timing_compute(pair, pair->pio_mode, &p, T, 1);
+			ide_timing_merge(&p, &t, &t,
+				IDE_TIMING_SETUP | IDE_TIMING_8BIT);
+			if (pair->dma_mode) {
+				ide_timing_compute(pair, pair->dma_mode,
+						&p, T, 1);
+				ide_timing_merge(&p, &t, &t,
+					IDE_TIMING_SETUP | IDE_TIMING_8BIT);
+			}
+		}
+		ali_program_timings(hwif, drive, &t);
 	} else {
 		pci_read_config_byte(dev, m5229_udma, &tmpbyte);
 		tmpbyte &= (0x0f << ((1-unit) << 2));
-- 
cgit v1.2.3-59-g8ed1b


From e4c7112b5686c70ba7be86dbc83c989c75aca802 Mon Sep 17 00:00:00 2001
From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Date: Mon, 18 Jan 2010 07:21:26 +0000
Subject: alim15x3: fix handling of UDMA enable bit

Clear UDMA enable bit also for PIO modes.

Based on libata pata_ali host driver.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/ide/alim15x3.c | 43 ++++++++++++++++++-------------------------
 1 file changed, 18 insertions(+), 25 deletions(-)

(limited to 'drivers')

diff --git a/drivers/ide/alim15x3.c b/drivers/ide/alim15x3.c
index 3ba7d0bdd25d..2c8016ad0e26 100644
--- a/drivers/ide/alim15x3.c
+++ b/drivers/ide/alim15x3.c
@@ -62,11 +62,22 @@ static void ali_fifo_control(ide_hwif_t *hwif, ide_drive_t *drive, int on)
 }
 
 static void ali_program_timings(ide_hwif_t *hwif, ide_drive_t *drive,
-				struct ide_timing *t)
+				struct ide_timing *t, u8 ultra)
 {
 	struct pci_dev *dev = to_pci_dev(hwif->dev);
 	int port = hwif->channel ? 0x5c : 0x58;
-	u8 unit = drive->dn & 1;
+	int udmat = 0x56 + hwif->channel;
+	u8 unit = drive->dn & 1, udma;
+	int shift = 4 * unit;
+
+	/* Set up the UDMA */
+	pci_read_config_byte(dev, udmat, &udma);
+	udma &= ~(0x0F << shift);
+	udma |= ultra << shift;
+	pci_write_config_byte(dev, udmat, udma);
+
+	if (t == NULL)
+		return;
 
 	t->setup = clamp_val(t->setup, 1, 8) & 7;
 	t->act8b = clamp_val(t->act8b, 1, 8) & 7;
@@ -114,7 +125,7 @@ static void ali_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive)
 	 */
 	ali_fifo_control(hwif, drive, (drive->media == ide_disk) ? 0x05 : 0x00);
 
-	ali_program_timings(hwif, drive, &t);
+	ali_program_timings(hwif, drive, &t, 0);
 }
 
 /**
@@ -152,29 +163,16 @@ static u8 ali_udma_filter(ide_drive_t *drive)
 
 static void ali_set_dma_mode(ide_hwif_t *hwif, ide_drive_t *drive)
 {
+	static u8 udma_timing[7] = { 0xC, 0xB, 0xA, 0x9, 0x8, 0xF, 0xD };
 	struct pci_dev *dev	= to_pci_dev(hwif->dev);
 	ide_drive_t *pair	= ide_get_pair_dev(drive);
 	int bus_speed		= ide_pci_clk ? ide_pci_clk : 33;
 	unsigned long T		=  1000000 / bus_speed; /* PCI clock based */
 	const u8 speed		= drive->dma_mode;
-	u8 speed1		= speed;
-	u8 unit			= drive->dn & 1;
 	u8 tmpbyte		= 0x00;
-	int m5229_udma		= (hwif->channel) ? 0x57 : 0x56;
 	struct ide_timing t;
 
-	if (speed == XFER_UDMA_6)
-		speed1 = 0x47;
-
 	if (speed < XFER_UDMA_0) {
-		u8 ultra_enable	= (unit) ? 0x7f : 0xf7;
-		/*
-		 * clear "ultra enable" bit
-		 */
-		pci_read_config_byte(dev, m5229_udma, &tmpbyte);
-		tmpbyte &= ultra_enable;
-		pci_write_config_byte(dev, m5229_udma, tmpbyte);
-
 		ide_timing_compute(drive, drive->dma_mode, &t, T, 1);
 		if (pair) {
 			struct ide_timing p;
@@ -189,15 +187,10 @@ static void ali_set_dma_mode(ide_hwif_t *hwif, ide_drive_t *drive)
 					IDE_TIMING_SETUP | IDE_TIMING_8BIT);
 			}
 		}
-		ali_program_timings(hwif, drive, &t);
+		ali_program_timings(hwif, drive, &t, 0);
 	} else {
-		pci_read_config_byte(dev, m5229_udma, &tmpbyte);
-		tmpbyte &= (0x0f << ((1-unit) << 2));
-		/*
-		 * enable ultra dma and set timing
-		 */
-		tmpbyte |= ((0x08 | ((4-speed1)&0x07)) << (unit << 2));
-		pci_write_config_byte(dev, m5229_udma, tmpbyte);
+		ali_program_timings(hwif, drive, NULL,
+				udma_timing[speed - XFER_UDMA_0]);
 		if (speed >= XFER_UDMA_3) {
 			pci_read_config_byte(dev, 0x4b, &tmpbyte);
 			tmpbyte |= 1;
-- 
cgit v1.2.3-59-g8ed1b


From f6d23c2e2e398dc96c58494be2934f0c11285e3a Mon Sep 17 00:00:00 2001
From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Date: Mon, 18 Jan 2010 07:21:33 +0000
Subject: amd74xx: use ->pio_mode value to determine pair device speed

Use the current PIO mode value instead of the current transfer speed
of the pair device on the port to determine PIO commmand timings used
for both devices on the port.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/ide/amd74xx.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers')

diff --git a/drivers/ide/amd74xx.c b/drivers/ide/amd74xx.c
index b7e105338205..3747b2561f09 100644
--- a/drivers/ide/amd74xx.c
+++ b/drivers/ide/amd74xx.c
@@ -94,7 +94,7 @@ static void amd_set_drive(ide_hwif_t *hwif, ide_drive_t *drive)
 	ide_timing_compute(drive, speed, &t, T, UT);
 
 	if (peer) {
-		ide_timing_compute(peer, peer->current_speed, &p, T, UT);
+		ide_timing_compute(peer, peer->pio_mode, &p, T, UT);
 		ide_timing_merge(&p, &t, &t, IDE_TIMING_8BIT);
 	}
 
-- 
cgit v1.2.3-59-g8ed1b


From 23d874054663efaf18340dc554df1b935820cbab Mon Sep 17 00:00:00 2001
From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Date: Mon, 18 Jan 2010 07:21:41 +0000
Subject: cmd64x: fix handling of address setup timings

Account for the requirements of the DMA mode currently used.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/ide/cmd64x.c | 17 ++++++++++-------
 1 file changed, 10 insertions(+), 7 deletions(-)

(limited to 'drivers')

diff --git a/drivers/ide/cmd64x.c b/drivers/ide/cmd64x.c
index a65a69171250..5f80312e636b 100644
--- a/drivers/ide/cmd64x.c
+++ b/drivers/ide/cmd64x.c
@@ -88,9 +88,6 @@ static void cmd64x_program_timings(ide_drive_t *drive, u8 mode)
 	pci_write_config_byte(dev, drwtim_regs[drive->dn],
 			      (t.active << 4) | t.recover);
 
-	if (mode >= XFER_SW_DMA_0)
-		return;
-
 	/*
 	 * The primary channel has individual address setup timing registers
 	 * for each drive and the hardware selects the slowest timing itself.
@@ -100,11 +97,17 @@ static void cmd64x_program_timings(ide_drive_t *drive, u8 mode)
 	if (hwif->channel) {
 		ide_drive_t *pair = ide_get_pair_dev(drive);
 
-		ide_set_drivedata(drive, (void *)(unsigned long)t.setup);
+		if (pair) {
+			struct ide_timing tp;
 
-		if (pair)
-			t.setup = max_t(u8, t.setup,
-					(unsigned long)ide_get_drivedata(pair));
+			ide_timing_compute(pair, pair->pio_mode, &tp, T, 0);
+			ide_timing_merge(&t, &tp, &t, IDE_TIMING_SETUP);
+			if (pair->dma_mode) {
+				ide_timing_compute(pair, pair->dma_mode,
+						&tp, T, 0);
+				ide_timing_merge(&tp, &t, &t, IDE_TIMING_SETUP);
+			}
+		}
 	}
 
 	if (t.setup > 5)		/* shouldn't actually happen... */
-- 
cgit v1.2.3-59-g8ed1b


From a298dc024c2b0b92d3889d61856117141d693b39 Mon Sep 17 00:00:00 2001
From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Date: Mon, 18 Jan 2010 07:21:48 +0000
Subject: cs5535: use ->pio_mode value to determine pair device speed

Use the current PIO mode value instead of the physical maximum one
of the pair device on the port to determine PIO commmand timings used
for both devices on the port.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/ide/cs5535.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers')

diff --git a/drivers/ide/cs5535.c b/drivers/ide/cs5535.c
index 740002b2f3e8..5059fafadf29 100644
--- a/drivers/ide/cs5535.c
+++ b/drivers/ide/cs5535.c
@@ -86,7 +86,7 @@ static void cs5535_set_speed(ide_drive_t *drive, const u8 speed)
 		cmd = pioa = speed - XFER_PIO_0;
 
 		if (pair) {
-			u8 piob = ide_get_best_pio_mode(pair, 255, 4);
+			u8 piob = pair->pio_mode - XFER_PIO_0;
 
 			if (piob < cmd)
 				cmd = piob;
-- 
cgit v1.2.3-59-g8ed1b


From 280d69b127f75e1928f583c90f659d49cec4d177 Mon Sep 17 00:00:00 2001
From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Date: Mon, 18 Jan 2010 07:21:55 +0000
Subject: cs5536: use ->pio_mode value to determine pair device speed

Use the current PIO mode value instead of the physical maximum one
of the pair device on the port to determine PIO commmand timings used
for both devices on the port.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/ide/cs5536.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers')

diff --git a/drivers/ide/cs5536.c b/drivers/ide/cs5536.c
index 70871fbc3c0a..24214ab60ac0 100644
--- a/drivers/ide/cs5536.c
+++ b/drivers/ide/cs5536.c
@@ -152,7 +152,7 @@ static void cs5536_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive)
 	u8 cmd_pio = pio;
 
 	if (pair)
-		cmd_pio = min(pio, ide_get_best_pio_mode(pair, 255, 4));
+		cmd_pio = min_t(u8, pio, pair->pio_mode - XFER_PIO_0);
 
 	timings &= (IDE_DRV_MASK << 8);
 	timings |= drv_timings[pio];
-- 
cgit v1.2.3-59-g8ed1b


From f657911d73f5165c4a32627adbbd7fcf98a85eae Mon Sep 17 00:00:00 2001
From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Date: Mon, 18 Jan 2010 07:22:02 +0000
Subject: it821x: use ->pio_mode value to determine pair device speed

Use the current PIO mode value instead of the physical maximum one
of the pair device on the port to determine PIO commmand timings used
for both devices on the port.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/ide/it821x.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers')

diff --git a/drivers/ide/it821x.c b/drivers/ide/it821x.c
index 56b79194156b..b2709c733485 100644
--- a/drivers/ide/it821x.c
+++ b/drivers/ide/it821x.c
@@ -252,7 +252,7 @@ static void it821x_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive)
 	 * on the cable.
 	 */
 	if (pair) {
-		u8 pair_pio = ide_get_best_pio_mode(pair, 255, 4);
+		u8 pair_pio = pair->pio_mode - XFER_PIO_0;
 		/* trim PIO to the slowest of the master/slave */
 		if (pair_pio < set_pio)
 			set_pio = pair_pio;
-- 
cgit v1.2.3-59-g8ed1b


From 0716302eec10c3a4c3c5110e43a5ac05ac4b2445 Mon Sep 17 00:00:00 2001
From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Date: Mon, 18 Jan 2010 07:22:09 +0000
Subject: palm_bk3710: use ->pio_mode value to determine pair device speed

Use the current PIO mode value instead of the physical maximum one
of the pair device on the port to determine PIO commmand timings used
for both devices on the port.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/ide/palm_bk3710.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers')

diff --git a/drivers/ide/palm_bk3710.c b/drivers/ide/palm_bk3710.c
index 35448c91b8c8..9e8f4e1b0cc9 100644
--- a/drivers/ide/palm_bk3710.c
+++ b/drivers/ide/palm_bk3710.c
@@ -166,7 +166,7 @@ static void palm_bk3710_setpiomode(void __iomem *base, ide_drive_t *mate,
 	writel(val32, base + BK3710_DATRCVR);
 
 	if (mate) {
-		u8 mode2 = ide_get_best_pio_mode(mate, 255, 4);
+		u8 mode2 = mate->pio_mode - XFER_PIO_0;
 
 		if (mode2 < mode)
 			mode = mode2;
-- 
cgit v1.2.3-59-g8ed1b


From bb430611930c526ff9bca991f254b259fc58ed3c Mon Sep 17 00:00:00 2001
From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Date: Mon, 18 Jan 2010 07:22:16 +0000
Subject: siimage: use ->pio_mode value to determine pair device speed

Use the current PIO mode value instead of the physical maximum one
of the pair device on the port to determine PIO commmand timings used
for both devices on the port.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/ide/siimage.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers')

diff --git a/drivers/ide/siimage.c b/drivers/ide/siimage.c
index 2009ac2ff658..ddeda444a27a 100644
--- a/drivers/ide/siimage.c
+++ b/drivers/ide/siimage.c
@@ -258,7 +258,7 @@ static void sil_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive)
 
 	/* trim *taskfile* PIO to the slowest of the master/slave */
 	if (pair) {
-		u8 pair_pio = ide_get_best_pio_mode(pair, 255, 4);
+		u8 pair_pio = pair->pio_mode - XFER_PIO_0;
 
 		if (pair_pio < tf_pio)
 			tf_pio = pair_pio;
-- 
cgit v1.2.3-59-g8ed1b


From 040f6b4f14adb2ca5babb84e9fb2ebc6661e0be2 Mon Sep 17 00:00:00 2001
From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Date: Mon, 18 Jan 2010 07:22:23 +0000
Subject: tx493xide: use ->pio_mode value to determine pair device speed

Use the current PIO mode value instead of the physical maximum one
of the pair device on the port to determine PIO commmand timings used
for both devices on the port.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/ide/tx4938ide.c | 2 +-
 drivers/ide/tx4939ide.c | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

(limited to 'drivers')

diff --git a/drivers/ide/tx4938ide.c b/drivers/ide/tx4938ide.c
index 326d4683488b..1d80f1fdbc97 100644
--- a/drivers/ide/tx4938ide.c
+++ b/drivers/ide/tx4938ide.c
@@ -64,7 +64,7 @@ static void tx4938ide_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive)
 
 	pair = ide_get_pair_dev(drive);
 	if (pair)
-		safe = min(safe, ide_get_best_pio_mode(pair, 255, 5));
+		safe = min(safe, pair->pio_mode - XFER_PIO_0);
 	tx4938ide_tune_ebusc(pdata->ebus_ch, pdata->gbus_clock, safe);
 }
 
diff --git a/drivers/ide/tx4939ide.c b/drivers/ide/tx4939ide.c
index f210633a3d57..3c7367751873 100644
--- a/drivers/ide/tx4939ide.c
+++ b/drivers/ide/tx4939ide.c
@@ -114,7 +114,7 @@ static void tx4939ide_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive)
 
 	pair = ide_get_pair_dev(drive);
 	if (pair)
-		safe = min(safe, ide_get_best_pio_mode(pair, 255, 4));
+		safe = min(safe, pair->pio_mode - XFER_PIO_0);
 	/*
 	 * Update Command Transfer Mode for master/slave and Data
 	 * Transfer Mode for this drive.
-- 
cgit v1.2.3-59-g8ed1b


From f0e5f62d92531b18c98feb6907bdb3d7b2f67ceb Mon Sep 17 00:00:00 2001
From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Date: Mon, 18 Jan 2010 07:22:30 +0000
Subject: via82cxxx: use ->pio_mode value to determine pair device speed

Use the current PIO mode value instead of the current transfer speed
of the pair device on the port to determine PIO commmand timings used
for both devices on the port.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/ide/via82cxxx.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers')

diff --git a/drivers/ide/via82cxxx.c b/drivers/ide/via82cxxx.c
index 6769fe252b07..e65d010b708d 100644
--- a/drivers/ide/via82cxxx.c
+++ b/drivers/ide/via82cxxx.c
@@ -199,7 +199,7 @@ static void via_set_drive(ide_hwif_t *hwif, ide_drive_t *drive)
 	ide_timing_compute(drive, speed, &t, T, UT);
 
 	if (peer) {
-		ide_timing_compute(peer, peer->current_speed, &p, T, UT);
+		ide_timing_compute(peer, peer->pio_mode, &p, T, UT);
 		ide_timing_merge(&p, &t, &t, IDE_TIMING_8BIT);
 	}
 
-- 
cgit v1.2.3-59-g8ed1b


From 220c58bc6d1198c4c4e69a385d364602c38b6b1c Mon Sep 17 00:00:00 2001
From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Date: Mon, 18 Jan 2010 07:22:38 +0000
Subject: ide: make ide_get_best_pio_mode() static

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/ide/ide-xfer-mode.c | 3 +--
 include/linux/ide.h         | 1 -
 2 files changed, 1 insertion(+), 3 deletions(-)

(limited to 'drivers')

diff --git a/drivers/ide/ide-xfer-mode.c b/drivers/ide/ide-xfer-mode.c
index 9b549e4d1848..5fc8d5c17de9 100644
--- a/drivers/ide/ide-xfer-mode.c
+++ b/drivers/ide/ide-xfer-mode.c
@@ -58,7 +58,7 @@ EXPORT_SYMBOL(ide_xfer_verbose);
  *	This is used by most chipset support modules when "auto-tuning".
  */
 
-u8 ide_get_best_pio_mode(ide_drive_t *drive, u8 mode_wanted, u8 max_mode)
+static u8 ide_get_best_pio_mode(ide_drive_t *drive, u8 mode_wanted, u8 max_mode)
 {
 	u16 *id = drive->id;
 	int pio_mode = -1, overridden = 0;
@@ -105,7 +105,6 @@ u8 ide_get_best_pio_mode(ide_drive_t *drive, u8 mode_wanted, u8 max_mode)
 
 	return pio_mode;
 }
-EXPORT_SYMBOL_GPL(ide_get_best_pio_mode);
 
 int ide_pio_need_iordy(ide_drive_t *drive, const u8 pio)
 {
diff --git a/include/linux/ide.h b/include/linux/ide.h
index 53ecdba82d72..97e6ab435184 100644
--- a/include/linux/ide.h
+++ b/include/linux/ide.h
@@ -1496,7 +1496,6 @@ int ide_timing_compute(ide_drive_t *, u8, struct ide_timing *, int, int);
 #ifdef CONFIG_IDE_XFER_MODE
 int ide_scan_pio_blacklist(char *);
 const char *ide_xfer_verbose(u8);
-u8 ide_get_best_pio_mode(ide_drive_t *, u8, u8);
 int ide_pio_need_iordy(ide_drive_t *, const u8);
 int ide_set_pio_mode(ide_drive_t *, u8);
 int ide_set_dma_mode(ide_drive_t *, u8);
-- 
cgit v1.2.3-59-g8ed1b


From 3dabcfef3e668f6dd32147d810a29ccbd55dc963 Mon Sep 17 00:00:00 2001
From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Date: Tue, 19 Jan 2010 11:30:09 -0800
Subject: ide: ide_timing_compute() fixup

XFER_SW_DMA_0 mode should be excluded from the extended cycle
timing computations.

[ This is just a documentation fix -- code inside the affected
  'if' block already makes sure to accept only PIO modes. ]

Noticed-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/ide/ide-timings.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers')

diff --git a/drivers/ide/ide-timings.c b/drivers/ide/ide-timings.c
index c7a65ee72310..0e05f75934c9 100644
--- a/drivers/ide/ide-timings.c
+++ b/drivers/ide/ide-timings.c
@@ -166,7 +166,7 @@ int ide_timing_compute(ide_drive_t *drive, u8 speed,
 	if (id[ATA_ID_FIELD_VALID] & 2) {	/* EIDE drive */
 		memset(&p, 0, sizeof(p));
 
-		if (speed >= XFER_PIO_0 && speed <= XFER_SW_DMA_0) {
+		if (speed >= XFER_PIO_0 && speed < XFER_SW_DMA_0) {
 			if (speed <= XFER_PIO_2)
 				p.cycle = p.cyc8b = id[ATA_ID_EIDE_PIO];
 			else if ((speed <= XFER_PIO_4) ||
-- 
cgit v1.2.3-59-g8ed1b


From 8495fb1b8d016657133c01a2f258c5f192d2a1b7 Mon Sep 17 00:00:00 2001
From: Chris Frey <cdfrey@foursquare.net>
Date: Thu, 28 Jan 2010 06:04:50 -0800
Subject: ide: fixed section mismatch warning in cmd640.c

Signed-off-by: Chris Frey <cdfrey@foursquare.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/ide/cmd640.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers')

diff --git a/drivers/ide/cmd640.c b/drivers/ide/cmd640.c
index 1a32d62ed86b..cb11938ba684 100644
--- a/drivers/ide/cmd640.c
+++ b/drivers/ide/cmd640.c
@@ -605,7 +605,7 @@ static void cmd640_set_pio_mode(ide_drive_t *drive, const u8 pio)
 }
 #endif /* CONFIG_BLK_DEV_CMD640_ENHANCED */
 
-static void cmd640_init_dev(ide_drive_t *drive)
+static void __init cmd640_init_dev(ide_drive_t *drive)
 {
 	unsigned int i = drive->hwif->channel * 2 + (drive->dn & 1);
 
-- 
cgit v1.2.3-59-g8ed1b


From b1681c56f5b6bf551bed2617a395855055836571 Mon Sep 17 00:00:00 2001
From: Joe Perches <joe@perches.com>
Date: Wed, 3 Feb 2010 18:44:44 -0800
Subject: drivers/ide: Fix continuation line formats

String constants that are continued on subsequent lines with \
are not good.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/ide/au1xxx-ide.c | 4 ++--
 drivers/ide/pmac.c       | 4 ++--
 2 files changed, 4 insertions(+), 4 deletions(-)

(limited to 'drivers')

diff --git a/drivers/ide/au1xxx-ide.c b/drivers/ide/au1xxx-ide.c
index e2fd378ba9de..bd0930a60b0c 100644
--- a/drivers/ide/au1xxx-ide.c
+++ b/drivers/ide/au1xxx-ide.c
@@ -299,8 +299,8 @@ static int auide_dma_test_irq(ide_drive_t *drive)
 	 */
 	drive->waiting_for_dma++;
 	if (drive->waiting_for_dma >= DMA_WAIT_TIMEOUT) {
-		printk(KERN_WARNING "%s: timeout waiting for ddma to \
-                                     complete\n", drive->name);
+		printk(KERN_WARNING "%s: timeout waiting for ddma to complete\n",
+		       drive->name);
 		return 1;
 	}
 	udelay(10);
diff --git a/drivers/ide/pmac.c b/drivers/ide/pmac.c
index 9fae1fb1468b..850ee452e9bb 100644
--- a/drivers/ide/pmac.c
+++ b/drivers/ide/pmac.c
@@ -1650,8 +1650,8 @@ pmac_ide_dma_test_irq (ide_drive_t *drive)
 		if ((status & FLUSH) == 0)
 			break;
 		if (++timeout > 100) {
-			printk(KERN_WARNING "ide%d, ide_dma_test_irq \
-			timeout flushing channel\n", hwif->index);
+			printk(KERN_WARNING "ide%d, ide_dma_test_irq timeout flushing channel\n",
+			       hwif->index);
 			break;
 		}
 	}	
-- 
cgit v1.2.3-59-g8ed1b