From 74c3e2a54b7d9eb57f23fb0e157b90bb6dae629f Mon Sep 17 00:00:00 2001 From: Andrew Lunn Date: Wed, 13 Apr 2016 02:40:44 +0200 Subject: dsa: Rename phys_port_mask to enabled_port_mask The phys in phys_port_mask suggests this mask is about PHYs. In fact, it means physical ports. Rename to enabled_port_mask, indicating external enabled ports of the switch, which is hopefully less confusing. Signed-off-by: Andrew Lunn Tested-by: Vivien Didelot Acked-by: Florian Fainelli Signed-off-by: David S. Miller --- drivers/net/dsa/bcm_sf2.c | 19 ++++++++++--------- drivers/net/dsa/mv88e6060.c | 2 +- 2 files changed, 11 insertions(+), 10 deletions(-) (limited to 'drivers') diff --git a/drivers/net/dsa/bcm_sf2.c b/drivers/net/dsa/bcm_sf2.c index 50caa525cda3..7a5f0ef46bd6 100644 --- a/drivers/net/dsa/bcm_sf2.c +++ b/drivers/net/dsa/bcm_sf2.c @@ -160,7 +160,7 @@ static void bcm_sf2_imp_vlan_setup(struct dsa_switch *ds, int cpu_port) * the same VLAN. */ for (i = 0; i < priv->hw_params.num_ports; i++) { - if (!((1 << i) & ds->phys_port_mask)) + if (!((1 << i) & ds->enabled_port_mask)) continue; reg = core_readl(priv, CORE_PORT_VLAN_CTL_PORT(i)); @@ -1009,7 +1009,7 @@ static int bcm_sf2_sw_setup(struct dsa_switch *ds) /* Enable all valid ports and disable those unused */ for (port = 0; port < priv->hw_params.num_ports; port++) { /* IMP port receives special treatment */ - if ((1 << port) & ds->phys_port_mask) + if ((1 << port) & ds->enabled_port_mask) bcm_sf2_port_setup(ds, port, NULL); else if (dsa_is_cpu_port(ds, port)) bcm_sf2_imp_setup(ds, port); @@ -1022,11 +1022,12 @@ static int bcm_sf2_sw_setup(struct dsa_switch *ds) * 7445D0, since 7445E0 disconnects the internal switch pseudo-PHY such * that we can use the regular SWITCH_MDIO master controller instead. * - * By default, DSA initializes ds->phys_mii_mask to ds->phys_port_mask - * to have a 1:1 mapping between Port address and PHY address in order - * to utilize the slave_mii_bus instance to read from Port PHYs. This is - * not what we want here, so we initialize phys_mii_mask 0 to always - * utilize the "master" MDIO bus backed by the "mdio-unimac" driver. + * By default, DSA initializes ds->phys_mii_mask to + * ds->enabled_port_mask to have a 1:1 mapping between Port address + * and PHY address in order to utilize the slave_mii_bus instance to + * read from Port PHYs. This is not what we want here, so we + * initialize phys_mii_mask 0 to always utilize the "master" MDIO + * bus backed by the "mdio-unimac" driver. */ if (of_machine_is_compatible("brcm,bcm7445d0")) ds->phys_mii_mask |= ((1 << BRCM_PSEUDO_PHY_ADDR) | (1 << 0)); @@ -1284,7 +1285,7 @@ static int bcm_sf2_sw_suspend(struct dsa_switch *ds) * bcm_sf2_sw_setup */ for (port = 0; port < DSA_MAX_PORTS; port++) { - if ((1 << port) & ds->phys_port_mask || + if ((1 << port) & ds->enabled_port_mask || dsa_is_cpu_port(ds, port)) bcm_sf2_port_disable(ds, port, NULL); } @@ -1308,7 +1309,7 @@ static int bcm_sf2_sw_resume(struct dsa_switch *ds) bcm_sf2_gphy_enable_set(ds, true); for (port = 0; port < DSA_MAX_PORTS; port++) { - if ((1 << port) & ds->phys_port_mask) + if ((1 << port) & ds->enabled_port_mask) bcm_sf2_port_setup(ds, port, NULL); else if (dsa_is_cpu_port(ds, port)) bcm_sf2_imp_setup(ds, port); diff --git a/drivers/net/dsa/mv88e6060.c b/drivers/net/dsa/mv88e6060.c index adb608ccd9aa..92cebab9383e 100644 --- a/drivers/net/dsa/mv88e6060.c +++ b/drivers/net/dsa/mv88e6060.c @@ -170,7 +170,7 @@ static int mv88e6060_setup_port(struct dsa_switch *ds, int p) REG_WRITE(addr, PORT_VLAN_MAP, ((p & 0xf) << PORT_VLAN_MAP_DBNUM_SHIFT) | (dsa_is_cpu_port(ds, p) ? - ds->phys_port_mask : + ds->enabled_port_mask : BIT(ds->dst->cpu_port))); /* Port Association Vector: when learning source addresses -- cgit v1.2.3-59-g8ed1b