From 56cf54831fd1be105e89a9df899e3b22442da180 Mon Sep 17 00:00:00 2001
From: Eric Dumazet <eric.dumazet@gmail.com>
Date: Thu, 19 Nov 2009 01:28:10 +0000
Subject: ieee802154: dont leak skbs in ieee802154_fake_xmit()

ieee802154_fake_xmit() should free skbs since it returns NETDEV_TX_OK

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Acked-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/ieee802154/fakehard.c | 5 +----
 1 file changed, 1 insertion(+), 4 deletions(-)

(limited to 'drivers')

diff --git a/drivers/ieee802154/fakehard.c b/drivers/ieee802154/fakehard.c
index 96a2959ce877..7c544f7c74c4 100644
--- a/drivers/ieee802154/fakehard.c
+++ b/drivers/ieee802154/fakehard.c
@@ -260,15 +260,12 @@ static int ieee802154_fake_close(struct net_device *dev)
 static netdev_tx_t ieee802154_fake_xmit(struct sk_buff *skb,
 					      struct net_device *dev)
 {
-	skb->iif = dev->ifindex;
-	skb->dev = dev;
 	dev->stats.tx_packets++;
 	dev->stats.tx_bytes += skb->len;
 
-	dev->trans_start = jiffies;
-
 	/* FIXME: do hardware work here ... */
 
+	dev_kfree_skb(skb);
 	return NETDEV_TX_OK;
 }
 
-- 
cgit v1.2.3-59-g8ed1b


From 2b1c8b0f925c3f5943cf95d263d72927baae88e7 Mon Sep 17 00:00:00 2001
From: Eric Dumazet <eric.dumazet@gmail.com>
Date: Wed, 18 Nov 2009 07:09:39 +0000
Subject: veth: Fix veth_get_stats()

veth_get_stats() can be called in parallel on several cpus.

It's better to not reset dev->stats as it could give wrong result on
one cpu. Use temporary variables, then store the final results.

Also, we should loop on every possible cpus, not only online cpus,
or cpu hotplug can suddenly give wrong veth stats.

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/veth.c | 35 ++++++++++++++++-------------------
 1 file changed, 16 insertions(+), 19 deletions(-)

(limited to 'drivers')

diff --git a/drivers/net/veth.c b/drivers/net/veth.c
index ade5b344f75d..52af5017c46b 100644
--- a/drivers/net/veth.c
+++ b/drivers/net/veth.c
@@ -210,32 +210,29 @@ rx_drop:
 static struct net_device_stats *veth_get_stats(struct net_device *dev)
 {
 	struct veth_priv *priv;
-	struct net_device_stats *dev_stats;
 	int cpu;
-	struct veth_net_stats *stats;
+	struct veth_net_stats *stats, total = {0};
 
 	priv = netdev_priv(dev);
-	dev_stats = &dev->stats;
-
-	dev_stats->rx_packets = 0;
-	dev_stats->tx_packets = 0;
-	dev_stats->rx_bytes = 0;
-	dev_stats->tx_bytes = 0;
-	dev_stats->tx_dropped = 0;
-	dev_stats->rx_dropped = 0;
 
-	for_each_online_cpu(cpu) {
+	for_each_possible_cpu(cpu) {
 		stats = per_cpu_ptr(priv->stats, cpu);
 
-		dev_stats->rx_packets += stats->rx_packets;
-		dev_stats->tx_packets += stats->tx_packets;
-		dev_stats->rx_bytes += stats->rx_bytes;
-		dev_stats->tx_bytes += stats->tx_bytes;
-		dev_stats->tx_dropped += stats->tx_dropped;
-		dev_stats->rx_dropped += stats->rx_dropped;
+		total.rx_packets += stats->rx_packets;
+		total.tx_packets += stats->tx_packets;
+		total.rx_bytes   += stats->rx_bytes;
+		total.tx_bytes   += stats->tx_bytes;
+		total.tx_dropped += stats->tx_dropped;
+		total.rx_dropped += stats->rx_dropped;
 	}
-
-	return dev_stats;
+	dev->stats.rx_packets = total.rx_packets;
+	dev->stats.tx_packets = total.tx_packets;
+	dev->stats.rx_bytes   = total.rx_bytes;
+	dev->stats.tx_bytes   = total.tx_bytes;
+	dev->stats.tx_dropped = total.tx_dropped;
+	dev->stats.rx_dropped = total.rx_dropped;
+
+	return &dev->stats;
 }
 
 static int veth_open(struct net_device *dev)
-- 
cgit v1.2.3-59-g8ed1b


From 30b768323f87bca15f14d6d146da397f98c29fe6 Mon Sep 17 00:00:00 2001
From: Jaswinder Singh Rajput <jaswinder@kernel.org>
Date: Fri, 20 Nov 2009 04:02:27 +0000
Subject: ixgbe: move tc variable to CONFIG_IXGBE_DCB
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

tc is required by CONFIG_IXGBE_DCB.
This also fixes compilation warning:

 drivers/net/ixgbe/ixgbe_main.c: In function ‘ixgbe_tx_is_paused’:
 drivers/net/ixgbe/ixgbe_main.c:245: warning: unused variable ‘tc’

Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Acked-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ixgbe/ixgbe_main.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers')

diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c
index a5036f7c1923..a456578b8578 100644
--- a/drivers/net/ixgbe/ixgbe_main.c
+++ b/drivers/net/ixgbe/ixgbe_main.c
@@ -240,11 +240,11 @@ static void ixgbe_unmap_and_free_tx_resource(struct ixgbe_adapter *adapter,
 static inline bool ixgbe_tx_is_paused(struct ixgbe_adapter *adapter,
                                       struct ixgbe_ring *tx_ring)
 {
-	int tc;
 	u32 txoff = IXGBE_TFCS_TXOFF;
 
 #ifdef CONFIG_IXGBE_DCB
 	if (adapter->flags & IXGBE_FLAG_DCB_ENABLED) {
+		int tc;
 		int reg_idx = tx_ring->reg_idx;
 		int dcb_i = adapter->ring_feature[RING_F_DCB].indices;
 
-- 
cgit v1.2.3-59-g8ed1b


From 38eb394e33d65abb9d05411547d2058db53b4d23 Mon Sep 17 00:00:00 2001
From: Bruce Allan <bruce.w.allan@intel.com>
Date: Thu, 19 Nov 2009 12:34:20 +0000
Subject: e1000e: partial revert of 3ec2a2b8 plus FC workraround for 82577/8

Commit 3ec2a2b80f3eb53851fe4cef9e65b5d33376ef89 broke Tx/Rx when using
jumbo frames on certain parts (i.e. only PAUSE frames could be exchanged
once the high water mark was reached preventing normal packet traffic).
This patch reverts the breakage and sets appropriate high and low water
marks of the Rx FIFO for 82577/82578 which require a workaround due to a
flow control issue in hardware.

Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/e1000e/e1000.h   |  2 ++
 drivers/net/e1000e/ich8lan.c |  1 +
 drivers/net/e1000e/netdev.c  | 41 +++++++++++++++++++++++++++++------------
 3 files changed, 32 insertions(+), 12 deletions(-)

(limited to 'drivers')

diff --git a/drivers/net/e1000e/e1000.h b/drivers/net/e1000e/e1000.h
index 189dfa2d6c76..3e187b0e4203 100644
--- a/drivers/net/e1000e/e1000.h
+++ b/drivers/net/e1000e/e1000.h
@@ -141,6 +141,8 @@ struct e1000_info;
 #define HV_TNCRS_UPPER		PHY_REG(778, 29) /* Transmit with no CRS */
 #define HV_TNCRS_LOWER		PHY_REG(778, 30)
 
+#define E1000_FCRTV_PCH     0x05F40 /* PCH Flow Control Refresh Timer Value */
+
 /* BM PHY Copper Specific Status */
 #define BM_CS_STATUS                      17
 #define BM_CS_STATUS_LINK_UP              0x0400
diff --git a/drivers/net/e1000e/ich8lan.c b/drivers/net/e1000e/ich8lan.c
index 51ddb04ab195..92cf10333654 100644
--- a/drivers/net/e1000e/ich8lan.c
+++ b/drivers/net/e1000e/ich8lan.c
@@ -3558,6 +3558,7 @@ struct e1000_info e1000_pch_info = {
 				  | FLAG_HAS_AMT
 				  | FLAG_HAS_FLASH
 				  | FLAG_HAS_JUMBO_FRAMES
+				  | FLAG_DISABLE_FC_PAUSE_TIME /* errata */
 				  | FLAG_APME_IN_WUC,
 	.pba			= 26,
 	.max_hw_frame_size	= 4096,
diff --git a/drivers/net/e1000e/netdev.c b/drivers/net/e1000e/netdev.c
index 0687c6aa4e46..a1a5a6f15a65 100644
--- a/drivers/net/e1000e/netdev.c
+++ b/drivers/net/e1000e/netdev.c
@@ -2769,25 +2769,38 @@ void e1000e_reset(struct e1000_adapter *adapter)
 	/*
 	 * flow control settings
 	 *
-	 * The high water mark must be low enough to fit two full frame
+	 * The high water mark must be low enough to fit one full frame
 	 * (or the size used for early receive) above it in the Rx FIFO.
 	 * Set it to the lower of:
 	 * - 90% of the Rx FIFO size, and
 	 * - the full Rx FIFO size minus the early receive size (for parts
 	 *   with ERT support assuming ERT set to E1000_ERT_2048), or
-	 * - the full Rx FIFO size minus two full frames
+	 * - the full Rx FIFO size minus one full frame
 	 */
-	if ((adapter->flags & FLAG_HAS_ERT) &&
-	    (adapter->netdev->mtu > ETH_DATA_LEN))
-		hwm = min(((pba << 10) * 9 / 10),
-			  ((pba << 10) - (E1000_ERT_2048 << 3)));
-	else
-		hwm = min(((pba << 10) * 9 / 10),
-			  ((pba << 10) - (2 * adapter->max_frame_size)));
+	if (hw->mac.type == e1000_pchlan) {
+		/*
+		 * Workaround PCH LOM adapter hangs with certain network
+		 * loads.  If hangs persist, try disabling Tx flow control.
+		 */
+		if (adapter->netdev->mtu > ETH_DATA_LEN) {
+			fc->high_water = 0x3500;
+			fc->low_water  = 0x1500;
+		} else {
+			fc->high_water = 0x5000;
+			fc->low_water  = 0x3000;
+		}
+	} else {
+		if ((adapter->flags & FLAG_HAS_ERT) &&
+		    (adapter->netdev->mtu > ETH_DATA_LEN))
+			hwm = min(((pba << 10) * 9 / 10),
+				  ((pba << 10) - (E1000_ERT_2048 << 3)));
+		else
+			hwm = min(((pba << 10) * 9 / 10),
+				  ((pba << 10) - adapter->max_frame_size));
 
-	fc->high_water = hwm & E1000_FCRTH_RTH; /* 8-byte granularity */
-	fc->low_water = (fc->high_water - (2 * adapter->max_frame_size));
-	fc->low_water &= E1000_FCRTL_RTL; /* 8-byte granularity */
+		fc->high_water = hwm & E1000_FCRTH_RTH; /* 8-byte granularity */
+		fc->low_water = fc->high_water - 8;
+	}
 
 	if (adapter->flags & FLAG_DISABLE_FC_PAUSE_TIME)
 		fc->pause_time = 0xFFFF;
@@ -2813,6 +2826,10 @@ void e1000e_reset(struct e1000_adapter *adapter)
 	if (mac->ops.init_hw(hw))
 		e_err("Hardware Error\n");
 
+	/* additional part of the flow-control workaround above */
+	if (hw->mac.type == e1000_pchlan)
+		ew32(FCRTV_PCH, 0x1000);
+
 	e1000_update_mng_vlan(adapter);
 
 	/* Enable h/w to recognize an 802.1Q VLAN Ethernet packet */
-- 
cgit v1.2.3-59-g8ed1b


From 842ec8b64ac34e9b245da31b4a5a49c3e744a714 Mon Sep 17 00:00:00 2001
From: Bruce Allan <bruce.w.allan@intel.com>
Date: Thu, 19 Nov 2009 12:34:40 +0000
Subject: e1000e: read of PHY register may access wrong page on 82578

Remove unnecessary workaround that mistakenly does not perform a page
select operation for PHY registers 29 and 30 (assuming these are the PHY
debug port address and data registers) on 82578 which can cause reads
of the Transmit with No Carrier Sense statistics register on page 778 to be
read from an incorrect page.  Also error out if the page select operation
fails.

Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/e1000e/phy.c | 46 ++++++++++++++++++++++------------------------
 1 file changed, 22 insertions(+), 24 deletions(-)

(limited to 'drivers')

diff --git a/drivers/net/e1000e/phy.c b/drivers/net/e1000e/phy.c
index 03175b3a2c9e..8189d00bfefe 100644
--- a/drivers/net/e1000e/phy.c
+++ b/drivers/net/e1000e/phy.c
@@ -2658,19 +2658,18 @@ static s32 __e1000_read_phy_reg_hv(struct e1000_hw *hw, u32 offset, u16 *data,
 		page = 0;
 
 	if (reg > MAX_PHY_MULTI_PAGE_REG) {
-		if ((hw->phy.type != e1000_phy_82578) ||
-		    ((reg != I82578_ADDR_REG) &&
-		     (reg != I82578_ADDR_REG + 1))) {
-			u32 phy_addr = hw->phy.addr;
+		u32 phy_addr = hw->phy.addr;
 
-			hw->phy.addr = 1;
+		hw->phy.addr = 1;
 
-			/* Page is shifted left, PHY expects (page x 32) */
-			ret_val = e1000e_write_phy_reg_mdic(hw,
-			                             IGP01E1000_PHY_PAGE_SELECT,
-			                             (page << IGP_PAGE_SHIFT));
-			hw->phy.addr = phy_addr;
-		}
+		/* Page is shifted left, PHY expects (page x 32) */
+		ret_val = e1000e_write_phy_reg_mdic(hw,
+					     IGP01E1000_PHY_PAGE_SELECT,
+					     (page << IGP_PAGE_SHIFT));
+		hw->phy.addr = phy_addr;
+
+		if (ret_val)
+			goto out;
 	}
 
 	ret_val = e1000e_read_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & reg,
@@ -2678,7 +2677,7 @@ static s32 __e1000_read_phy_reg_hv(struct e1000_hw *hw, u32 offset, u16 *data,
 out:
 	/* Revert to MDIO fast mode, if applicable */
 	if ((hw->phy.type == e1000_phy_82577) && in_slow_mode)
-		ret_val = e1000_set_mdio_slow_mode_hv(hw, false);
+		ret_val |= e1000_set_mdio_slow_mode_hv(hw, false);
 
 	if (!locked)
 		hw->phy.ops.release_phy(hw);
@@ -2784,19 +2783,18 @@ static s32 __e1000_write_phy_reg_hv(struct e1000_hw *hw, u32 offset, u16 data,
 	}
 
 	if (reg > MAX_PHY_MULTI_PAGE_REG) {
-		if ((hw->phy.type != e1000_phy_82578) ||
-		    ((reg != I82578_ADDR_REG) &&
-		     (reg != I82578_ADDR_REG + 1))) {
-			u32 phy_addr = hw->phy.addr;
+		u32 phy_addr = hw->phy.addr;
 
-			hw->phy.addr = 1;
+		hw->phy.addr = 1;
 
-			/* Page is shifted left, PHY expects (page x 32) */
-			ret_val = e1000e_write_phy_reg_mdic(hw,
-			                             IGP01E1000_PHY_PAGE_SELECT,
-			                             (page << IGP_PAGE_SHIFT));
-			hw->phy.addr = phy_addr;
-		}
+		/* Page is shifted left, PHY expects (page x 32) */
+		ret_val = e1000e_write_phy_reg_mdic(hw,
+					     IGP01E1000_PHY_PAGE_SELECT,
+					     (page << IGP_PAGE_SHIFT));
+		hw->phy.addr = phy_addr;
+
+		if (ret_val)
+			goto out;
 	}
 
 	ret_val = e1000e_write_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & reg,
@@ -2805,7 +2803,7 @@ static s32 __e1000_write_phy_reg_hv(struct e1000_hw *hw, u32 offset, u16 data,
 out:
 	/* Revert to MDIO fast mode, if applicable */
 	if ((hw->phy.type == e1000_phy_82577) && in_slow_mode)
-		ret_val = e1000_set_mdio_slow_mode_hv(hw, false);
+		ret_val |= e1000_set_mdio_slow_mode_hv(hw, false);
 
 	if (!locked)
 		hw->phy.ops.release_phy(hw);
-- 
cgit v1.2.3-59-g8ed1b


From 29afd690636dab36fe437c54b3a9d5e093bdcd9b Mon Sep 17 00:00:00 2001
From: Bruce Allan <bruce.w.allan@intel.com>
Date: Thu, 19 Nov 2009 12:35:08 +0000
Subject: e1000e: set flow control thresholds properly after enabling/disabling
 pause

When flow control (pause) parameters were changed via ethtool (i.e. enabled
or disabled), the newly calculated thresholds were not being written to the
device for non-fiber media.

Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/e1000e/ethtool.c | 12 ++++++++++--
 1 file changed, 10 insertions(+), 2 deletions(-)

(limited to 'drivers')

diff --git a/drivers/net/e1000e/ethtool.c b/drivers/net/e1000e/ethtool.c
index 1bf4d2a5d34f..e82638ecae88 100644
--- a/drivers/net/e1000e/ethtool.c
+++ b/drivers/net/e1000e/ethtool.c
@@ -327,10 +327,18 @@ static int e1000_set_pauseparam(struct net_device *netdev,
 
 		hw->fc.current_mode = hw->fc.requested_mode;
 
-		retval = ((hw->phy.media_type == e1000_media_type_fiber) ?
-			  hw->mac.ops.setup_link(hw) : e1000e_force_mac_fc(hw));
+		if (hw->phy.media_type == e1000_media_type_fiber) {
+			retval = hw->mac.ops.setup_link(hw);
+			/* implicit goto out */
+		} else {
+			retval = e1000e_force_mac_fc(hw);
+			if (retval)
+				goto out;
+			e1000e_set_fc_watermarks(hw);
+		}
 	}
 
+out:
 	clear_bit(__E1000_RESETTING, &adapter->state);
 	return retval;
 }
-- 
cgit v1.2.3-59-g8ed1b


From 4c86e0b9455c8fa8122fc2d10935e892838c8568 Mon Sep 17 00:00:00 2001
From: Bruce Allan <bruce.w.allan@intel.com>
Date: Thu, 19 Nov 2009 12:35:26 +0000
Subject: e1000e: add Tx timeout factor for 100Mbps

On some devices (e.g. 82578) not having a Tx timeout factor when linked at
100Mbps can cause false reports of hardware hangs on busy hubs.

Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/e1000e/netdev.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers')

diff --git a/drivers/net/e1000e/netdev.c b/drivers/net/e1000e/netdev.c
index a1a5a6f15a65..63458270ce1b 100644
--- a/drivers/net/e1000e/netdev.c
+++ b/drivers/net/e1000e/netdev.c
@@ -3627,7 +3627,7 @@ static void e1000_watchdog_task(struct work_struct *work)
 			case SPEED_100:
 				txb2b = 0;
 				netdev->tx_queue_len = 100;
-				/* maybe add some timeout factor ? */
+				adapter->tx_timeout_factor = 10;
 				break;
 			}
 
-- 
cgit v1.2.3-59-g8ed1b


From 610c992884c80566de31d71ec361a5a7b2a0ed5e Mon Sep 17 00:00:00 2001
From: Bruce Allan <bruce.w.allan@intel.com>
Date: Thu, 19 Nov 2009 12:35:45 +0000
Subject: e1000e: flow control thresholds not correct when changing mtu

When changing MTU, save it off prior to resetting otherwise the flow control
thresholds may be miscalculated.

Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/e1000e/netdev.c | 7 +++----
 1 file changed, 3 insertions(+), 4 deletions(-)

(limited to 'drivers')

diff --git a/drivers/net/e1000e/netdev.c b/drivers/net/e1000e/netdev.c
index 63458270ce1b..fad8f9ea0043 100644
--- a/drivers/net/e1000e/netdev.c
+++ b/drivers/net/e1000e/netdev.c
@@ -4305,8 +4305,10 @@ static int e1000_change_mtu(struct net_device *netdev, int new_mtu)
 
 	while (test_and_set_bit(__E1000_RESETTING, &adapter->state))
 		msleep(1);
-	/* e1000e_down has a dependency on max_frame_size */
+	/* e1000e_down -> e1000e_reset dependent on max_frame_size & mtu */
 	adapter->max_frame_size = max_frame;
+	e_info("changing MTU from %d to %d\n", netdev->mtu, new_mtu);
+	netdev->mtu = new_mtu;
 	if (netif_running(netdev))
 		e1000e_down(adapter);
 
@@ -4336,9 +4338,6 @@ static int e1000_change_mtu(struct net_device *netdev, int new_mtu)
 		adapter->rx_buffer_len = ETH_FRAME_LEN + VLAN_HLEN
 					 + ETH_FCS_LEN;
 
-	e_info("changing MTU from %d to %d\n", netdev->mtu, new_mtu);
-	netdev->mtu = new_mtu;
-
 	if (netif_running(netdev))
 		e1000e_up(adapter);
 	else
-- 
cgit v1.2.3-59-g8ed1b


From 189983d469c6d98e64ddfb9f9ce76725cb082ee5 Mon Sep 17 00:00:00 2001
From: Bruce Allan <bruce.w.allan@intel.com>
Date: Thu, 19 Nov 2009 12:36:04 +0000
Subject: e1000e: remove unnecessary 82577 workaround causing link issues

A workaround for pre-release versions of 82577 is causing link issues on
some switches.  The workaround is no longer needed on production parts so
remove it.

Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/e1000e/phy.c | 10 ----------
 1 file changed, 10 deletions(-)

(limited to 'drivers')

diff --git a/drivers/net/e1000e/phy.c b/drivers/net/e1000e/phy.c
index 8189d00bfefe..85f955f70417 100644
--- a/drivers/net/e1000e/phy.c
+++ b/drivers/net/e1000e/phy.c
@@ -71,7 +71,6 @@ static const u16 e1000_igp_2_cable_length_table[] =
 #define I82577_CFG_ASSERT_CRS_ON_TX       (1 << 15)
 #define I82577_CFG_ENABLE_DOWNSHIFT       (3 << 10) /* auto downshift 100/10 */
 #define I82577_CTRL_REG                   23
-#define I82577_CTRL_DOWNSHIFT_MASK        (7 << 10)
 
 /* 82577 specific PHY registers */
 #define I82577_PHY_CTRL_2            18
@@ -660,15 +659,6 @@ s32 e1000_copper_link_setup_82577(struct e1000_hw *hw)
 	phy_data |= I82577_CFG_ENABLE_DOWNSHIFT;
 
 	ret_val = phy->ops.write_phy_reg(hw, I82577_CFG_REG, phy_data);
-	if (ret_val)
-		goto out;
-
-	/* Set number of link attempts before downshift */
-	ret_val = phy->ops.read_phy_reg(hw, I82577_CTRL_REG, &phy_data);
-	if (ret_val)
-		goto out;
-	phy_data &= ~I82577_CTRL_DOWNSHIFT_MASK;
-	ret_val = phy->ops.write_phy_reg(hw, I82577_CTRL_REG, phy_data);
 
 out:
 	return ret_val;
-- 
cgit v1.2.3-59-g8ed1b


From 818f33313caab9be2a10458500dbed4a88c1b334 Mon Sep 17 00:00:00 2001
From: Bruce Allan <bruce.w.allan@intel.com>
Date: Thu, 19 Nov 2009 14:17:30 +0000
Subject: e1000e: do not initiate autonegotiation during OEM configuration

When configuring the OEM bits in the PHY on 82577/82578, do not restart
autonegotiation if the firmware is blocking it (e.g. when an IDE-R session
is active) because the link must not go down.

Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/e1000e/ich8lan.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

(limited to 'drivers')

diff --git a/drivers/net/e1000e/ich8lan.c b/drivers/net/e1000e/ich8lan.c
index 92cf10333654..eff3f4783655 100644
--- a/drivers/net/e1000e/ich8lan.c
+++ b/drivers/net/e1000e/ich8lan.c
@@ -1118,7 +1118,8 @@ static s32 e1000_oem_bits_config_ich8lan(struct e1000_hw *hw, bool d0_state)
 			oem_reg |= HV_OEM_BITS_LPLU;
 	}
 	/* Restart auto-neg to activate the bits */
-	oem_reg |= HV_OEM_BITS_RESTART_AN;
+	if (!e1000_check_reset_block(hw))
+		oem_reg |= HV_OEM_BITS_RESTART_AN;
 	ret_val = hw->phy.ops.write_phy_reg_locked(hw, HV_OEM_BITS, oem_reg);
 
 out:
-- 
cgit v1.2.3-59-g8ed1b


From 0ebe74e7ba5929f46d5db4d735a9d7a85a38976b Mon Sep 17 00:00:00 2001
From: Geert Uytterhoeven <geert@linux-m68k.org>
Date: Fri, 20 Nov 2009 09:19:10 +0000
Subject: net: ETHOC should depend on HAS_DMA

When building for Sun 3:

drivers/net/ethoc.c:1091: undefined reference to `dma_free_coherent'
drivers/built-in.o: In function `ethoc_probe':
drivers/net/ethoc.c:965: undefined reference to `dma_alloc_coherent'
drivers/net/ethoc.c:1063: undefined reference to `dma_free_coherent'

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/Kconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers')

diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index e19ca4bb7510..b2f71f79baaf 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -975,7 +975,7 @@ config ENC28J60_WRITEVERIFY
 
 config ETHOC
 	tristate "OpenCores 10/100 Mbps Ethernet MAC support"
-	depends on NET_ETHERNET && HAS_IOMEM
+	depends on NET_ETHERNET && HAS_IOMEM && HAS_DMA
 	select MII
 	select PHYLIB
 	select CRC32
-- 
cgit v1.2.3-59-g8ed1b


From 4a91ca4e18553b1f96ce68216459c7d9669f8b3d Mon Sep 17 00:00:00 2001
From: "David J. Choi" <david.choi@micrel.com>
Date: Thu, 19 Nov 2009 15:34:30 +0000
Subject: drivers/net: ks8851_mll ethernet network driver -resubmit

Summary of Changes:

	-Fix to receive multicast packets by setting the corresponding hardware
	 bit during initialization.
	-Fix to re-enable the interface [by interface up command(ifup)] while the
	 interface is down.
	-Fix to be able to down the interface by passing the last parameter
	 correctly to request_irq().
	-Remove to read 4 extra bytes from the receiving queue after reading a
	 packet, even though it does not cause a predictable issue now.
	-Remove occurrences of transmission done interrupt in order to tx
	 throughput enhancement.
	-Enable IP checksum for packet receiving by setting the corresponding
	 hardware bit during initialization.
	-Relocate ks_enable_int()/ks_disable_int() in order not to declare those
	 functions at the beginning of the file.
	-Rename ks_enable()/_disable() to ks_enable_qmu()/ks_disable_qmu() in
	 order to give more meaningful names and relocate them not declaire
	 those functions at the beginning of the file.

Signed-off-by: David J. Choi <david.choi@micrel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ks8851_mll.c | 142 +++++++++++++++++++++++------------------------
 1 file changed, 68 insertions(+), 74 deletions(-)

(limited to 'drivers')

diff --git a/drivers/net/ks8851_mll.c b/drivers/net/ks8851_mll.c
index 0be14d702beb..c146304d8d6c 100644
--- a/drivers/net/ks8851_mll.c
+++ b/drivers/net/ks8851_mll.c
@@ -568,6 +568,16 @@ static inline void ks_outblk(struct ks_net *ks, u16 *wptr, u32 len)
 		iowrite16(*wptr++, ks->hw_addr);
 }
 
+static void ks_disable_int(struct ks_net *ks)
+{
+	ks_wrreg16(ks, KS_IER, 0x0000);
+}  /* ks_disable_int */
+
+static void ks_enable_int(struct ks_net *ks)
+{
+	ks_wrreg16(ks, KS_IER, ks->rc_ier);
+}  /* ks_enable_int */
+
 /**
  * ks_tx_fifo_space - return the available hardware buffer size.
  * @ks: The chip information
@@ -681,6 +691,47 @@ static void ks_soft_reset(struct ks_net *ks, unsigned op)
 }
 
 
+void ks_enable_qmu(struct ks_net *ks)
+{
+	u16 w;
+
+	w = ks_rdreg16(ks, KS_TXCR);
+	/* Enables QMU Transmit (TXCR). */
+	ks_wrreg16(ks, KS_TXCR, w | TXCR_TXE);
+
+	/*
+	 * RX Frame Count Threshold Enable and Auto-Dequeue RXQ Frame
+	 * Enable
+	 */
+
+	w = ks_rdreg16(ks, KS_RXQCR);
+	ks_wrreg16(ks, KS_RXQCR, w | RXQCR_RXFCTE);
+
+	/* Enables QMU Receive (RXCR1). */
+	w = ks_rdreg16(ks, KS_RXCR1);
+	ks_wrreg16(ks, KS_RXCR1, w | RXCR1_RXE);
+	ks->enabled = true;
+}  /* ks_enable_qmu */
+
+static void ks_disable_qmu(struct ks_net *ks)
+{
+	u16	w;
+
+	w = ks_rdreg16(ks, KS_TXCR);
+
+	/* Disables QMU Transmit (TXCR). */
+	w  &= ~TXCR_TXE;
+	ks_wrreg16(ks, KS_TXCR, w);
+
+	/* Disables QMU Receive (RXCR1). */
+	w = ks_rdreg16(ks, KS_RXCR1);
+	w &= ~RXCR1_RXE ;
+	ks_wrreg16(ks, KS_RXCR1, w);
+
+	ks->enabled = false;
+
+}  /* ks_disable_qmu */
+
 /**
  * ks_read_qmu - read 1 pkt data from the QMU.
  * @ks: The chip information
@@ -752,7 +803,7 @@ static void ks_rcv(struct ks_net *ks, struct net_device *netdev)
 			(frame_hdr->len < RX_BUF_SIZE) && frame_hdr->len)) {
 			skb_reserve(skb, 2);
 			/* read data block including CRC 4 bytes */
-			ks_read_qmu(ks, (u16 *)skb->data, frame_hdr->len + 4);
+			ks_read_qmu(ks, (u16 *)skb->data, frame_hdr->len);
 			skb_put(skb, frame_hdr->len);
 			skb->dev = netdev;
 			skb->protocol = eth_type_trans(skb, netdev);
@@ -861,7 +912,7 @@ static int ks_net_open(struct net_device *netdev)
 		ks_dbg(ks, "%s - entry\n", __func__);
 
 	/* reset the HW */
-	err = request_irq(ks->irq, ks_irq, KS_INT_FLAGS, DRV_NAME, ks);
+	err = request_irq(ks->irq, ks_irq, KS_INT_FLAGS, DRV_NAME, netdev);
 
 	if (err) {
 		printk(KERN_ERR "Failed to request IRQ: %d: %d\n",
@@ -869,6 +920,15 @@ static int ks_net_open(struct net_device *netdev)
 		return err;
 	}
 
+	/* wake up powermode to normal mode */
+	ks_set_powermode(ks, PMECR_PM_NORMAL);
+	mdelay(1);	/* wait for normal mode to take effect */
+
+	ks_wrreg16(ks, KS_ISR, 0xffff);
+	ks_enable_int(ks);
+	ks_enable_qmu(ks);
+	netif_start_queue(ks->netdev);
+
 	if (netif_msg_ifup(ks))
 		ks_dbg(ks, "network device %s up\n", netdev->name);
 
@@ -892,19 +952,14 @@ static int ks_net_stop(struct net_device *netdev)
 
 	netif_stop_queue(netdev);
 
-	kfree(ks->frame_head_info);
-
 	mutex_lock(&ks->lock);
 
 	/* turn off the IRQs and ack any outstanding */
 	ks_wrreg16(ks, KS_IER, 0x0000);
 	ks_wrreg16(ks, KS_ISR, 0xffff);
 
-	/* shutdown RX process */
-	ks_wrreg16(ks, KS_RXCR1, 0x0000);
-
-	/* shutdown TX process */
-	ks_wrreg16(ks, KS_TXCR, 0x0000);
+	/* shutdown RX/TX QMU */
+	ks_disable_qmu(ks);
 
 	/* set powermode to soft power down to save power */
 	ks_set_powermode(ks, PMECR_PM_SOFTDOWN);
@@ -929,17 +984,8 @@ static int ks_net_stop(struct net_device *netdev)
  */
 static void ks_write_qmu(struct ks_net *ks, u8 *pdata, u16 len)
 {
-	unsigned fid = ks->fid;
-
-	fid = ks->fid;
-	ks->fid = (ks->fid + 1) & TXFR_TXFID_MASK;
-
-	/* reduce the tx interrupt occurrances. */
-	if (!fid)
-		fid |= TXFR_TXIC;       /* irq on completion */
-
 	/* start header at txb[0] to align txw entries */
-	ks->txh.txw[0] = cpu_to_le16(fid);
+	ks->txh.txw[0] = 0;
 	ks->txh.txw[1] = cpu_to_le16(len);
 
 	/* 1. set sudo-DMA mode */
@@ -957,16 +1003,6 @@ static void ks_write_qmu(struct ks_net *ks, u8 *pdata, u16 len)
 		;
 }
 
-static void ks_disable_int(struct ks_net *ks)
-{
-	ks_wrreg16(ks, KS_IER, 0x0000);
-}  /* ks_disable_int */
-
-static void ks_enable_int(struct ks_net *ks)
-{
-	ks_wrreg16(ks, KS_IER, ks->rc_ier);
-}  /* ks_enable_int */
-
 /**
  * ks_start_xmit - transmit packet
  * @skb		: The buffer to transmit
@@ -1410,25 +1446,6 @@ static int ks_read_selftest(struct ks_net *ks)
 	return ret;
 }
 
-static void ks_disable(struct ks_net *ks)
-{
-	u16	w;
-
-	w = ks_rdreg16(ks, KS_TXCR);
-
-	/* Disables QMU Transmit (TXCR). */
-	w  &= ~TXCR_TXE;
-	ks_wrreg16(ks, KS_TXCR, w);
-
-	/* Disables QMU Receive (RXCR1). */
-	w = ks_rdreg16(ks, KS_RXCR1);
-	w &= ~RXCR1_RXE ;
-	ks_wrreg16(ks, KS_RXCR1, w);
-
-	ks->enabled = false;
-
-}  /* ks_disable */
-
 static void ks_setup(struct ks_net *ks)
 {
 	u16	w;
@@ -1463,7 +1480,7 @@ static void ks_setup(struct ks_net *ks)
 	w = TXCR_TXFCE | TXCR_TXPE | TXCR_TXCRC | TXCR_TCGIP;
 	ks_wrreg16(ks, KS_TXCR, w);
 
-	w = RXCR1_RXFCE | RXCR1_RXBE | RXCR1_RXUE;
+	w = RXCR1_RXFCE | RXCR1_RXBE | RXCR1_RXUE | RXCR1_RXME | RXCR1_RXIPFCC;
 
 	if (ks->promiscuous)         /* bPromiscuous */
 		w |= (RXCR1_RXAE | RXCR1_RXINVF);
@@ -1486,28 +1503,6 @@ static void ks_setup_int(struct ks_net *ks)
 	ks->rc_ier = (IRQ_LCI | IRQ_TXI | IRQ_RXI);
 }  /* ks_setup_int */
 
-void ks_enable(struct ks_net *ks)
-{
-	u16 w;
-
-	w = ks_rdreg16(ks, KS_TXCR);
-	/* Enables QMU Transmit (TXCR). */
-	ks_wrreg16(ks, KS_TXCR, w | TXCR_TXE);
-
-	/*
-	 * RX Frame Count Threshold Enable and Auto-Dequeue RXQ Frame
-	 * Enable
-	 */
-
-	w = ks_rdreg16(ks, KS_RXQCR);
-	ks_wrreg16(ks, KS_RXQCR, w | RXQCR_RXFCTE);
-
-	/* Enables QMU Receive (RXCR1). */
-	w = ks_rdreg16(ks, KS_RXCR1);
-	ks_wrreg16(ks, KS_RXCR1, w | RXCR1_RXE);
-	ks->enabled = true;
-}  /* ks_enable */
-
 static int ks_hw_init(struct ks_net *ks)
 {
 #define	MHEADER_SIZE	(sizeof(struct type_frame_head) * MAX_RECV_FRAMES)
@@ -1612,11 +1607,9 @@ static int __devinit ks8851_probe(struct platform_device *pdev)
 
 	ks_soft_reset(ks, GRR_GSR);
 	ks_hw_init(ks);
-	ks_disable(ks);
+	ks_disable_qmu(ks);
 	ks_setup(ks);
 	ks_setup_int(ks);
-	ks_enable_int(ks);
-	ks_enable(ks);
 	memcpy(netdev->dev_addr, ks->mac_addr, 6);
 
 	data = ks_rdreg16(ks, KS_OBCR);
@@ -1658,6 +1651,7 @@ static int __devexit ks8851_remove(struct platform_device *pdev)
 	struct ks_net *ks = netdev_priv(netdev);
 	struct resource *iomem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 
+	kfree(ks->frame_head_info);
 	unregister_netdev(netdev);
 	iounmap(ks->hw_addr);
 	free_netdev(netdev);
-- 
cgit v1.2.3-59-g8ed1b


From 507eebef86a59713c2180c813d90f98a7bf6c2b4 Mon Sep 17 00:00:00 2001
From: "chaithrika@ti.com" <chaithrika@ti.com>
Date: Thu, 1 Oct 2009 10:25:19 +0000
Subject: TI DaVinci EMAC: Minor macro related updates

Use BIT for macro definitions wherever possible, remove
unused and redundant macros.

Signed-off-by: Chaithrika U S <chaithrika@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/davinci_emac.c | 26 +++++++++++---------------
 1 file changed, 11 insertions(+), 15 deletions(-)

(limited to 'drivers')

diff --git a/drivers/net/davinci_emac.c b/drivers/net/davinci_emac.c
index db6380379478..e3478314c002 100644
--- a/drivers/net/davinci_emac.c
+++ b/drivers/net/davinci_emac.c
@@ -164,16 +164,14 @@ static const char emac_version_string[] = "TI DaVinci EMAC Linux v6.1";
 # define EMAC_MBP_MCASTCHAN(ch)		((ch) & 0x7)
 
 /* EMAC mac_control register */
-#define EMAC_MACCONTROL_TXPTYPE		(0x200)
-#define EMAC_MACCONTROL_TXPACEEN	(0x40)
-#define EMAC_MACCONTROL_MIIEN		(0x20)
-#define EMAC_MACCONTROL_GIGABITEN	(0x80)
-#define EMAC_MACCONTROL_GIGABITEN_SHIFT (7)
-#define EMAC_MACCONTROL_FULLDUPLEXEN	(0x1)
+#define EMAC_MACCONTROL_TXPTYPE		BIT(9)
+#define EMAC_MACCONTROL_TXPACEEN	BIT(6)
+#define EMAC_MACCONTROL_GMIIEN		BIT(5)
+#define EMAC_MACCONTROL_GIGABITEN	BIT(7)
+#define EMAC_MACCONTROL_FULLDUPLEXEN	BIT(0)
 #define EMAC_MACCONTROL_RMIISPEED_MASK	BIT(15)
 
 /* GIGABIT MODE related bits */
-#define EMAC_DM646X_MACCONTORL_GMIIEN	BIT(5)
 #define EMAC_DM646X_MACCONTORL_GIG	BIT(7)
 #define EMAC_DM646X_MACCONTORL_GIGFORCE	BIT(17)
 
@@ -192,10 +190,10 @@ static const char emac_version_string[] = "TI DaVinci EMAC Linux v6.1";
 #define EMAC_RX_BUFFER_OFFSET_MASK	(0xFFFF)
 
 /* MAC_IN_VECTOR (0x180) register bit fields */
-#define EMAC_DM644X_MAC_IN_VECTOR_HOST_INT	      (0x20000)
-#define EMAC_DM644X_MAC_IN_VECTOR_STATPEND_INT	      (0x10000)
-#define EMAC_DM644X_MAC_IN_VECTOR_RX_INT_VEC	      (0x0100)
-#define EMAC_DM644X_MAC_IN_VECTOR_TX_INT_VEC	      (0x01)
+#define EMAC_DM644X_MAC_IN_VECTOR_HOST_INT	BIT(17)
+#define EMAC_DM644X_MAC_IN_VECTOR_STATPEND_INT	BIT(16)
+#define EMAC_DM644X_MAC_IN_VECTOR_RX_INT_VEC	BIT(8)
+#define EMAC_DM644X_MAC_IN_VECTOR_TX_INT_VEC	BIT(0)
 
 /** NOTE:: For DM646x the IN_VECTOR has changed */
 #define EMAC_DM646X_MAC_IN_VECTOR_RX_INT_VEC	BIT(EMAC_DEF_RX_CH)
@@ -203,7 +201,6 @@ static const char emac_version_string[] = "TI DaVinci EMAC Linux v6.1";
 #define EMAC_DM646X_MAC_IN_VECTOR_HOST_INT	BIT(26)
 #define EMAC_DM646X_MAC_IN_VECTOR_STATPEND_INT	BIT(27)
 
-
 /* CPPI bit positions */
 #define EMAC_CPPI_SOP_BIT		BIT(31)
 #define EMAC_CPPI_EOP_BIT		BIT(30)
@@ -750,8 +747,7 @@ static void emac_update_phystatus(struct emac_priv *priv)
 
 	if (priv->speed == SPEED_1000 && (priv->version == EMAC_VERSION_2)) {
 		mac_control = emac_read(EMAC_MACCONTROL);
-		mac_control |= (EMAC_DM646X_MACCONTORL_GMIIEN |
-				EMAC_DM646X_MACCONTORL_GIG |
+		mac_control |= (EMAC_DM646X_MACCONTORL_GIG |
 				EMAC_DM646X_MACCONTORL_GIGFORCE);
 	} else {
 		/* Clear the GIG bit and GIGFORCE bit */
@@ -2108,7 +2104,7 @@ static int emac_hw_enable(struct emac_priv *priv)
 
 	/* Enable MII */
 	val = emac_read(EMAC_MACCONTROL);
-	val |= (EMAC_MACCONTROL_MIIEN);
+	val |= (EMAC_MACCONTROL_GMIIEN);
 	emac_write(EMAC_MACCONTROL, val);
 
 	/* Enable NAPI and interrupts */
-- 
cgit v1.2.3-59-g8ed1b


From 5d521fd36de4e61ab16a358df54c5babe153396c Mon Sep 17 00:00:00 2001
From: Amit Kumar Salecha <amit@netxen.com>
Date: Fri, 20 Nov 2009 15:09:32 +0000
Subject: netxen: fix memory initialization

Avoid resetting memory during initialization, skip this memory
block during driver probe.

Signed-off-by: Amit Kumar Salecha <amit@netxen.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/netxen/netxen_nic_init.c | 2 ++
 1 file changed, 2 insertions(+)

(limited to 'drivers')

diff --git a/drivers/net/netxen/netxen_nic_init.c b/drivers/net/netxen/netxen_nic_init.c
index e40b914d6faf..8a0904368e08 100644
--- a/drivers/net/netxen/netxen_nic_init.c
+++ b/drivers/net/netxen/netxen_nic_init.c
@@ -544,6 +544,8 @@ int netxen_pinit_from_rom(struct netxen_adapter *adapter, int verbose)
 				continue;
 			if (off == (ROMUSB_GLB + 0x1c)) /* MS clock */
 				continue;
+			if ((off & 0x0ff00000) == NETXEN_CRB_DDR_NET)
+				continue;
 			if (off == (NETXEN_CRB_PEG_NET_1 + 0x18))
 				buf[i].data = 0x1020;
 			/* skip the function enable register */
-- 
cgit v1.2.3-59-g8ed1b


From a7483b0afa63e851c4438ddda8934a296851f1de Mon Sep 17 00:00:00 2001
From: Narender Kumar <narender.kumar@qlogic.com>
Date: Fri, 20 Nov 2009 15:09:33 +0000
Subject: netxen: fix promisc for NX2031.

Kernel crashes, if promisc mode set without disabling rx queue.
Before changing mode in NX2031 chip, wait till rx queue drains.

Signed-off-by: Narender Kumar <narender.kumar@qlogic.com>
Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/netxen/netxen_nic_hdr.h |  2 ++
 drivers/net/netxen/netxen_nic_hw.c  | 49 ++++++++++++++++++++++++++++---------
 2 files changed, 40 insertions(+), 11 deletions(-)

(limited to 'drivers')

diff --git a/drivers/net/netxen/netxen_nic_hdr.h b/drivers/net/netxen/netxen_nic_hdr.h
index 1c46da632125..17bb3818d84e 100644
--- a/drivers/net/netxen/netxen_nic_hdr.h
+++ b/drivers/net/netxen/netxen_nic_hdr.h
@@ -545,6 +545,8 @@ enum {
 #define	NETXEN_NIU_TEST_MUX_CTL		(NETXEN_CRB_NIU + 0x00094)
 #define	NETXEN_NIU_XG_PAUSE_CTL		(NETXEN_CRB_NIU + 0x00098)
 #define	NETXEN_NIU_XG_PAUSE_LEVEL	(NETXEN_CRB_NIU + 0x000dc)
+#define	NETXEN_NIU_FRAME_COUNT_SELECT	(NETXEN_CRB_NIU + 0x000ac)
+#define	NETXEN_NIU_FRAME_COUNT		(NETXEN_CRB_NIU + 0x000b0)
 #define	NETXEN_NIU_XG_SEL		(NETXEN_CRB_NIU + 0x00128)
 #define NETXEN_NIU_GB_PAUSE_CTL		(NETXEN_CRB_NIU + 0x0030c)
 
diff --git a/drivers/net/netxen/netxen_nic_hw.c b/drivers/net/netxen/netxen_nic_hw.c
index 3185a98b0917..e2c4a0192ea1 100644
--- a/drivers/net/netxen/netxen_nic_hw.c
+++ b/drivers/net/netxen/netxen_nic_hw.c
@@ -383,24 +383,51 @@ int netxen_niu_disable_xg_port(struct netxen_adapter *adapter)
 
 int netxen_p2_nic_set_promisc(struct netxen_adapter *adapter, u32 mode)
 {
-	__u32 reg;
+	u32 mac_cfg;
+	u32 cnt = 0;
+	__u32 reg = 0x0200;
 	u32 port = adapter->physical_port;
+	u16 board_type = adapter->ahw.board_type;
 
 	if (port > NETXEN_NIU_MAX_XG_PORTS)
 		return -EINVAL;
 
-	reg = NXRD32(adapter, NETXEN_NIU_XGE_CONFIG_1 + (0x10000 * port));
-	if (mode == NETXEN_NIU_PROMISC_MODE)
-		reg = (reg | 0x2000UL);
-	else
-		reg = (reg & ~0x2000UL);
+	mac_cfg = NXRD32(adapter, NETXEN_NIU_XGE_CONFIG_0 + (0x10000 * port));
+	mac_cfg &= ~0x4;
+	NXWR32(adapter, NETXEN_NIU_XGE_CONFIG_0 + (0x10000 * port), mac_cfg);
 
-	if (mode == NETXEN_NIU_ALLMULTI_MODE)
-		reg = (reg | 0x1000UL);
-	else
-		reg = (reg & ~0x1000UL);
+	if ((board_type == NETXEN_BRDTYPE_P2_SB31_10G_IMEZ) ||
+			(board_type == NETXEN_BRDTYPE_P2_SB31_10G_HMEZ))
+		reg = (0x20 << port);
+
+	NXWR32(adapter, NETXEN_NIU_FRAME_COUNT_SELECT, reg);
+
+	mdelay(10);
+
+	while (NXRD32(adapter, NETXEN_NIU_FRAME_COUNT) && ++cnt < 20)
+		mdelay(10);
+
+	if (cnt < 20) {
+
+		reg = NXRD32(adapter,
+			NETXEN_NIU_XGE_CONFIG_1 + (0x10000 * port));
+
+		if (mode == NETXEN_NIU_PROMISC_MODE)
+			reg = (reg | 0x2000UL);
+		else
+			reg = (reg & ~0x2000UL);
+
+		if (mode == NETXEN_NIU_ALLMULTI_MODE)
+			reg = (reg | 0x1000UL);
+		else
+			reg = (reg & ~0x1000UL);
+
+		NXWR32(adapter,
+			NETXEN_NIU_XGE_CONFIG_1 + (0x10000 * port), reg);
+	}
 
-	NXWR32(adapter, NETXEN_NIU_XGE_CONFIG_1 + (0x10000 * port), reg);
+	mac_cfg |= 0x4;
+	NXWR32(adapter, NETXEN_NIU_XGE_CONFIG_0 + (0x10000 * port), mac_cfg);
 
 	return 0;
 }
-- 
cgit v1.2.3-59-g8ed1b


From 5d09e534bbb94e1fdc8e4783ac822bc172465a91 Mon Sep 17 00:00:00 2001
From: Narender Kumar <narender.kumar@qlogic.com>
Date: Fri, 20 Nov 2009 22:08:57 +0000
Subject: netxen : fix BOND_MODE_TLB/ALB mode.

o Along with netdev->perm_addr, mac address will be
  maintained in device private structure.

o Device limitation: We need to set mac address when ever
  interface comes up.

In ALB/TAL mode, bonding driver calls set_mac for all slave with bond mac address.
But bonding driver set netdev->dev_addr field to its original value,
after enslaving interfaces.

When ever active slave changes, it swap dev_addr of inactive slave with active.
Yet it doesn't notify driver about change in netdev->dev_addr.

As netxen driver need to set mac addr when ever interface comes up,
it can't rely on netdev->dev_addr field. Specially in case of bonding mode ALB/TLB.

Signed-off-by: Narender Kumar <narender.kumar@qlogic.com>
Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/netxen/netxen_nic.h      | 2 ++
 drivers/net/netxen/netxen_nic_hw.c   | 6 +++---
 drivers/net/netxen/netxen_nic_main.c | 4 +++-
 3 files changed, 8 insertions(+), 4 deletions(-)

(limited to 'drivers')

diff --git a/drivers/net/netxen/netxen_nic.h b/drivers/net/netxen/netxen_nic.h
index 7384f59df615..e1237b802872 100644
--- a/drivers/net/netxen/netxen_nic.h
+++ b/drivers/net/netxen/netxen_nic.h
@@ -1163,6 +1163,8 @@ struct netxen_adapter {
 	u32 int_vec_bit;
 	u32 heartbit;
 
+	u8 mac_addr[ETH_ALEN];
+
 	struct netxen_adapter_stats stats;
 
 	struct netxen_recv_context recv_ctx;
diff --git a/drivers/net/netxen/netxen_nic_hw.c b/drivers/net/netxen/netxen_nic_hw.c
index e2c4a0192ea1..52a3798d8d94 100644
--- a/drivers/net/netxen/netxen_nic_hw.c
+++ b/drivers/net/netxen/netxen_nic_hw.c
@@ -463,7 +463,7 @@ netxen_nic_enable_mcast_filter(struct netxen_adapter *adapter)
 {
 	u32	val = 0;
 	u16 port = adapter->physical_port;
-	u8 *addr = adapter->netdev->dev_addr;
+	u8 *addr = adapter->mac_addr;
 
 	if (adapter->mc_enabled)
 		return 0;
@@ -492,7 +492,7 @@ netxen_nic_disable_mcast_filter(struct netxen_adapter *adapter)
 {
 	u32	val = 0;
 	u16 port = adapter->physical_port;
-	u8 *addr = adapter->netdev->dev_addr;
+	u8 *addr = adapter->mac_addr;
 
 	if (!adapter->mc_enabled)
 		return 0;
@@ -687,7 +687,7 @@ void netxen_p3_nic_set_multi(struct net_device *netdev)
 
 	list_splice_tail_init(&adapter->mac_list, &del_list);
 
-	nx_p3_nic_add_mac(adapter, netdev->dev_addr, &del_list);
+	nx_p3_nic_add_mac(adapter, adapter->mac_addr, &del_list);
 	nx_p3_nic_add_mac(adapter, bcast_addr, &del_list);
 
 	if (netdev->flags & IFF_PROMISC) {
diff --git a/drivers/net/netxen/netxen_nic_main.c b/drivers/net/netxen/netxen_nic_main.c
index 0b4a56a8c8d5..3bf78dbfbf0f 100644
--- a/drivers/net/netxen/netxen_nic_main.c
+++ b/drivers/net/netxen/netxen_nic_main.c
@@ -437,6 +437,7 @@ netxen_read_mac_addr(struct netxen_adapter *adapter)
 		netdev->dev_addr[i] = *(p + 5 - i);
 
 	memcpy(netdev->perm_addr, netdev->dev_addr, netdev->addr_len);
+	memcpy(adapter->mac_addr, netdev->dev_addr, netdev->addr_len);
 
 	/* set station address */
 
@@ -459,6 +460,7 @@ int netxen_nic_set_mac(struct net_device *netdev, void *p)
 		netxen_napi_disable(adapter);
 	}
 
+	memcpy(adapter->mac_addr, addr->sa_data, netdev->addr_len);
 	memcpy(netdev->dev_addr, addr->sa_data, netdev->addr_len);
 	adapter->macaddr_set(adapter, addr->sa_data);
 
@@ -956,7 +958,7 @@ netxen_nic_up(struct netxen_adapter *adapter, struct net_device *netdev)
 		return err;
 	}
 	if (NX_IS_REVISION_P2(adapter->ahw.revision_id))
-		adapter->macaddr_set(adapter, netdev->dev_addr);
+		adapter->macaddr_set(adapter, adapter->mac_addr);
 
 	adapter->set_multi(netdev);
 	adapter->set_mtu(adapter, netdev->mtu);
-- 
cgit v1.2.3-59-g8ed1b


From 63edaf647607795a065e6956a79c47f500dc8447 Mon Sep 17 00:00:00 2001
From: Alexander Beregalov <a.beregalov@gmail.com>
Date: Sun, 22 Nov 2009 20:40:52 -0800
Subject: Au1x00: fix crash when trying register_netdev()

Andreas Lohre reported that the driver crashes when trying
to register_netdev(), he sugessted to move dev->netdev_ops initialization
before calling register_netdev(), it worked for him.

Reported-by: Andreas Lohre <alohre@gmail.com>
Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/au1000_eth.c | 15 ++++++++-------
 1 file changed, 8 insertions(+), 7 deletions(-)

(limited to 'drivers')

diff --git a/drivers/net/au1000_eth.c b/drivers/net/au1000_eth.c
index ce6f1ac25df8..3f4b4300f533 100644
--- a/drivers/net/au1000_eth.c
+++ b/drivers/net/au1000_eth.c
@@ -1088,7 +1088,14 @@ static struct net_device * au1000_probe(int port_num)
 		return NULL;
 	}
 
-	if ((err = register_netdev(dev)) != 0) {
+	dev->base_addr = base;
+	dev->irq = irq;
+	dev->netdev_ops = &au1000_netdev_ops;
+	SET_ETHTOOL_OPS(dev, &au1000_ethtool_ops);
+	dev->watchdog_timeo = ETH_TX_TIMEOUT;
+
+	err = register_netdev(dev);
+	if (err != 0) {
 		printk(KERN_ERR "%s: Cannot register net device, error %d\n",
 				DRV_NAME, err);
 		free_netdev(dev);
@@ -1209,12 +1216,6 @@ static struct net_device * au1000_probe(int port_num)
 		aup->tx_db_inuse[i] = pDB;
 	}
 
-	dev->base_addr = base;
-	dev->irq = irq;
-	dev->netdev_ops = &au1000_netdev_ops;
-	SET_ETHTOOL_OPS(dev, &au1000_ethtool_ops);
-	dev->watchdog_timeo = ETH_TX_TIMEOUT;
-
 	/*
 	 * The boot code uses the ethernet controller, so reset it to start
 	 * fresh.  au1000_init() expects that the device is in reset state.
-- 
cgit v1.2.3-59-g8ed1b


From e6e3625f3b95145bfcf421285f8f7f452a5adf7e Mon Sep 17 00:00:00 2001
From: Giuseppe CAVALLARO <peppe.cavallaro@st.com>
Date: Sun, 22 Nov 2009 22:58:40 +0000
Subject: stmmac: fixed a compilation error when use the external timer

Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/stmmac/stmmac_timer.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'drivers')

diff --git a/drivers/net/stmmac/stmmac_timer.c b/drivers/net/stmmac/stmmac_timer.c
index b838c6582077..679f61ffb1f8 100644
--- a/drivers/net/stmmac/stmmac_timer.c
+++ b/drivers/net/stmmac/stmmac_timer.c
@@ -63,7 +63,7 @@ int stmmac_open_ext_timer(struct net_device *dev, struct stmmac_timer *tm)
 
 	stmmac_rtc = rtc_class_open(CONFIG_RTC_HCTOSYS_DEVICE);
 	if (stmmac_rtc == NULL) {
-		pr_error("open rtc device failed\n");
+		pr_err("open rtc device failed\n");
 		return -ENODEV;
 	}
 
@@ -71,7 +71,7 @@ int stmmac_open_ext_timer(struct net_device *dev, struct stmmac_timer *tm)
 
 	/* Periodic mode is not supported */
 	if ((rtc_irq_set_freq(stmmac_rtc, &stmmac_task, tm->freq) < 0)) {
-		pr_error("set periodic failed\n");
+		pr_err("set periodic failed\n");
 		rtc_irq_unregister(stmmac_rtc, &stmmac_task);
 		rtc_class_close(stmmac_rtc);
 		return -1;
-- 
cgit v1.2.3-59-g8ed1b


From 73cfe264c27fb50d4592ef1580486bea319443ac Mon Sep 17 00:00:00 2001
From: Giuseppe CAVALLARO <peppe.cavallaro@st.com>
Date: Sun, 22 Nov 2009 22:59:56 +0000
Subject: stmmac: do not fail when the timer cannot be used.

If the external timer cannot be used the driver
will continue to work without mitigation.

Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/stmmac/stmmac_main.c  | 50 ++++++++++++++++++++++-----------------
 drivers/net/stmmac/stmmac_timer.h |  1 +
 2 files changed, 29 insertions(+), 22 deletions(-)

(limited to 'drivers')

diff --git a/drivers/net/stmmac/stmmac_main.c b/drivers/net/stmmac/stmmac_main.c
index c2f14dc9ba28..9542995ba667 100644
--- a/drivers/net/stmmac/stmmac_main.c
+++ b/drivers/net/stmmac/stmmac_main.c
@@ -416,13 +416,8 @@ static void init_dma_desc_rings(struct net_device *dev)
 	unsigned int txsize = priv->dma_tx_size;
 	unsigned int rxsize = priv->dma_rx_size;
 	unsigned int bfsize = priv->dma_buf_sz;
-	int buff2_needed = 0;
-	int dis_ic = 0;
+	int buff2_needed = 0, dis_ic = 0;
 
-#ifdef CONFIG_STMMAC_TIMER
-	/* Using Timers disable interrupts on completion for the reception */
-	dis_ic = 1;
-#endif
 	/* Set the Buffer size according to the MTU;
 	 * indeed, in case of jumbo we need to bump-up the buffer sizes.
 	 */
@@ -437,6 +432,11 @@ static void init_dma_desc_rings(struct net_device *dev)
 	else
 		bfsize = DMA_BUFFER_SIZE;
 
+#ifdef CONFIG_STMMAC_TIMER
+	/* Disable interrupts on completion for the reception if timer is on */
+	if (likely(priv->tm->enable))
+		dis_ic = 1;
+#endif
 	/* If the MTU exceeds 8k so use the second buffer in the chain */
 	if (bfsize >= BUF_SIZE_8KiB)
 		buff2_needed = 1;
@@ -809,20 +809,22 @@ static void stmmac_tx(struct stmmac_priv *priv)
 
 static inline void stmmac_enable_irq(struct stmmac_priv *priv)
 {
-#ifndef CONFIG_STMMAC_TIMER
-	writel(DMA_INTR_DEFAULT_MASK, priv->dev->base_addr + DMA_INTR_ENA);
-#else
-	priv->tm->timer_start(tmrate);
+#ifdef CONFIG_STMMAC_TIMER
+	if (likely(priv->tm->enable))
+		priv->tm->timer_start(tmrate);
+	else
 #endif
+	writel(DMA_INTR_DEFAULT_MASK, priv->dev->base_addr + DMA_INTR_ENA);
 }
 
 static inline void stmmac_disable_irq(struct stmmac_priv *priv)
 {
-#ifndef CONFIG_STMMAC_TIMER
-	writel(0, priv->dev->base_addr + DMA_INTR_ENA);
-#else
-	priv->tm->timer_stop();
+#ifdef CONFIG_STMMAC_TIMER
+	if (likely(priv->tm->enable))
+		priv->tm->timer_stop();
+	else
 #endif
+	writel(0, priv->dev->base_addr + DMA_INTR_ENA);
 }
 
 static int stmmac_has_work(struct stmmac_priv *priv)
@@ -1031,22 +1033,23 @@ static int stmmac_open(struct net_device *dev)
 	}
 
 #ifdef CONFIG_STMMAC_TIMER
-	priv->tm = kmalloc(sizeof(struct stmmac_timer *), GFP_KERNEL);
+	priv->tm = kzalloc(sizeof(struct stmmac_timer *), GFP_KERNEL);
 	if (unlikely(priv->tm == NULL)) {
 		pr_err("%s: ERROR: timer memory alloc failed \n", __func__);
 		return -ENOMEM;
 	}
 	priv->tm->freq = tmrate;
 
-	/* Test if the HW timer can be actually used.
-	 * In case of failure continue with no timer. */
+	/* Test if the external timer can be actually used.
+	 * In case of failure continue without timer. */
 	if (unlikely((stmmac_open_ext_timer(dev, priv->tm)) < 0)) {
-		pr_warning("stmmaceth: cannot attach the HW timer\n");
+		pr_warning("stmmaceth: cannot attach the external timer.\n");
 		tmrate = 0;
 		priv->tm->freq = 0;
 		priv->tm->timer_start = stmmac_no_timer_started;
 		priv->tm->timer_stop = stmmac_no_timer_stopped;
-	}
+	} else
+		priv->tm->enable = 1;
 #endif
 
 	/* Create and initialize the TX/RX descriptors chains. */
@@ -1322,9 +1325,11 @@ static netdev_tx_t stmmac_xmit(struct sk_buff *skb, struct net_device *dev)
 
 	/* Interrupt on completition only for the latest segment */
 	priv->mac_type->ops->close_tx_desc(desc);
+
 #ifdef CONFIG_STMMAC_TIMER
-	/* Clean IC while using timers */
-	priv->mac_type->ops->clear_tx_ic(desc);
+	/* Clean IC while using timer */
+	if (likely(priv->tm->enable))
+		priv->mac_type->ops->clear_tx_ic(desc);
 #endif
 	/* To avoid raise condition */
 	priv->mac_type->ops->set_tx_owner(first);
@@ -2028,7 +2033,8 @@ static int stmmac_suspend(struct platform_device *pdev, pm_message_t state)
 
 #ifdef CONFIG_STMMAC_TIMER
 		priv->tm->timer_stop();
-		dis_ic = 1;
+		if (likely(priv->tm->enable))
+			dis_ic = 1;
 #endif
 		napi_disable(&priv->napi);
 
diff --git a/drivers/net/stmmac/stmmac_timer.h b/drivers/net/stmmac/stmmac_timer.h
index f795cae33725..6863590d184b 100644
--- a/drivers/net/stmmac/stmmac_timer.h
+++ b/drivers/net/stmmac/stmmac_timer.h
@@ -26,6 +26,7 @@ struct stmmac_timer {
 	void (*timer_start) (unsigned int new_freq);
 	void (*timer_stop) (void);
 	unsigned int freq;
+	unsigned int enable;
 };
 
 /* Open the HW timer device and return 0 in case of success */
-- 
cgit v1.2.3-59-g8ed1b


From 9ce673d5e919966efc1ef5adf20248e6ecc62724 Mon Sep 17 00:00:00 2001
From: Antti Kaijanmäki <antti.kaijanmaki@nomovok.com>
Date: Mon, 23 Nov 2009 10:54:24 -0800
Subject: hso: fix debug routines
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Signed-off-by: Antti Kaijanmäki <antti.kaijanmaki@nomovok.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/usb/hso.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'drivers')

diff --git a/drivers/net/usb/hso.c b/drivers/net/usb/hso.c
index fa4e58196c21..746839bb89ff 100644
--- a/drivers/net/usb/hso.c
+++ b/drivers/net/usb/hso.c
@@ -378,7 +378,7 @@ static void dbg_dump(int line_count, const char *func_name, unsigned char *buf,
 }
 
 #define DUMP(buf_, len_)	\
-	dbg_dump(__LINE__, __func__, buf_, len_)
+	dbg_dump(__LINE__, __func__, (unsigned char *)buf_, len_)
 
 #define DUMP1(buf_, len_)			\
 	do {					\
@@ -1527,7 +1527,7 @@ static void tiocmget_intr_callback(struct urb *urb)
 		dev_warn(&usb->dev,
 			 "hso received invalid serial state notification\n");
 		DUMP(serial_state_notification,
-		     sizeof(hso_serial_state_notifation))
+		     sizeof(struct hso_serial_state_notification));
 	} else {
 
 		UART_state_bitmap = le16_to_cpu(serial_state_notification->
-- 
cgit v1.2.3-59-g8ed1b


From dcfcb256cc23c4436691b0fe677275306699d6a1 Mon Sep 17 00:00:00 2001
From: Antti Kaijanmäki <antti.kaijanmaki@nomovok.com>
Date: Mon, 23 Nov 2009 10:54:47 -0800
Subject: hso: fix soft-lockup
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Fix soft-lockup in hso.c which is triggered on SMP machine when
modem is removed while file descriptor(s) under /dev are still open:

  old version called kref_put() too early which resulted in destroying
  hso_serial and hso_device objects which were still used later on.

Signed-off-by: Antti Kaijanmäki <antti.kaijanmaki@nomovok.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/usb/hso.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

(limited to 'drivers')

diff --git a/drivers/net/usb/hso.c b/drivers/net/usb/hso.c
index 746839bb89ff..43bc3fcc0d85 100644
--- a/drivers/net/usb/hso.c
+++ b/drivers/net/usb/hso.c
@@ -1363,7 +1363,7 @@ static void hso_serial_close(struct tty_struct *tty, struct file *filp)
 	/* reset the rts and dtr */
 	/* do the actual close */
 	serial->open_count--;
-	kref_put(&serial->parent->ref, hso_serial_ref_free);
+
 	if (serial->open_count <= 0) {
 		serial->open_count = 0;
 		spin_lock_irq(&serial->serial_lock);
@@ -1383,6 +1383,8 @@ static void hso_serial_close(struct tty_struct *tty, struct file *filp)
 		usb_autopm_put_interface(serial->parent->interface);
 
 	mutex_unlock(&serial->parent->mutex);
+
+	kref_put(&serial->parent->ref, hso_serial_ref_free);
 }
 
 /* close the requested serial port */
-- 
cgit v1.2.3-59-g8ed1b


From 54ab040d24904d1fa2c0a6a27936b7c56a4efb24 Mon Sep 17 00:00:00 2001
From: "John W. Linville" <linville@tuxdriver.com>
Date: Mon, 23 Nov 2009 16:15:19 -0500
Subject: ath9k: set ps_default as false

Copied from original one-line patch here:

	http://bugzilla.kernel.org/show_bug.cgi?id=14267#c26

Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/ath9k/main.c | 2 ++
 1 file changed, 2 insertions(+)

(limited to 'drivers')

diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c
index 52bed89063d4..43d2be9867fc 100644
--- a/drivers/net/wireless/ath/ath9k/main.c
+++ b/drivers/net/wireless/ath/ath9k/main.c
@@ -1555,6 +1555,8 @@ void ath_set_hw_capab(struct ath_softc *sc, struct ieee80211_hw *hw)
 		BIT(NL80211_IFTYPE_ADHOC) |
 		BIT(NL80211_IFTYPE_MESH_POINT);
 
+	hw->wiphy->ps_default = false;
+
 	hw->queues = 4;
 	hw->max_rates = 4;
 	hw->channel_change_time = 5000;
-- 
cgit v1.2.3-59-g8ed1b


From 8c2acc53fd7987493f11640e266cf7130591e764 Mon Sep 17 00:00:00 2001
From: Patrick McHardy <kaber@trash.net>
Date: Mon, 23 Nov 2009 14:18:53 -0800
Subject: macvlan: fix gso_max_size setting

gso_max_size must be set based on the value of the underlying device to
support devices not using the full 64k.

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/macvlan.c | 2 ++
 1 file changed, 2 insertions(+)

(limited to 'drivers')

diff --git a/drivers/net/macvlan.c b/drivers/net/macvlan.c
index 3aabfd9dd212..2490aa39804c 100644
--- a/drivers/net/macvlan.c
+++ b/drivers/net/macvlan.c
@@ -360,6 +360,7 @@ static int macvlan_init(struct net_device *dev)
 	dev->state		= (dev->state & ~MACVLAN_STATE_MASK) |
 				  (lowerdev->state & MACVLAN_STATE_MASK);
 	dev->features 		= lowerdev->features & MACVLAN_FEATURES;
+	dev->gso_max_size	= lowerdev->gso_max_size;
 	dev->iflink		= lowerdev->ifindex;
 	dev->hard_header_len	= lowerdev->hard_header_len;
 
@@ -596,6 +597,7 @@ static int macvlan_device_event(struct notifier_block *unused,
 	case NETDEV_FEAT_CHANGE:
 		list_for_each_entry(vlan, &port->vlans, list) {
 			vlan->dev->features = dev->features & MACVLAN_FEATURES;
+			vlan->dev->gso_max_size = dev->gso_max_size;
 			netdev_features_change(vlan->dev);
 		}
 		break;
-- 
cgit v1.2.3-59-g8ed1b