From bb58596f6802a4959c2cea02acd272245e671c1d Mon Sep 17 00:00:00 2001 From: Dave C Boutcher Date: Tue, 15 Nov 2005 09:53:00 -0600 Subject: [SCSI] ibmvscsi kexec fix This makes ibmvscsi work correctly with the recent set of kexec patches that went in. This is based on work by Michael Ellerman, who chased this initially. He validated that it works during kexec. Handle kexec correctly in ibmvscsi. During kexec the adapter will not get cleaned up correctly, so we may need to reset it to make it sane again. Signed-off-by: Dave Boutcher Signed-off-by: James Bottomley --- drivers/scsi/ibmvscsi/ibmvscsi.h | 2 +- drivers/scsi/ibmvscsi/iseries_vscsi.c | 3 ++- drivers/scsi/ibmvscsi/rpa_vscsi.c | 8 +++++++- 3 files changed, 10 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/ibmvscsi/ibmvscsi.h b/drivers/scsi/ibmvscsi/ibmvscsi.h index 8bec0438dc8a..5b0edd1f1921 100644 --- a/drivers/scsi/ibmvscsi/ibmvscsi.h +++ b/drivers/scsi/ibmvscsi/ibmvscsi.h @@ -100,7 +100,7 @@ int ibmvscsi_init_crq_queue(struct crq_queue *queue, void ibmvscsi_release_crq_queue(struct crq_queue *queue, struct ibmvscsi_host_data *hostdata, int max_requests); -void ibmvscsi_reset_crq_queue(struct crq_queue *queue, +int ibmvscsi_reset_crq_queue(struct crq_queue *queue, struct ibmvscsi_host_data *hostdata); void ibmvscsi_handle_crq(struct viosrp_crq *crq, diff --git a/drivers/scsi/ibmvscsi/iseries_vscsi.c b/drivers/scsi/ibmvscsi/iseries_vscsi.c index 1045872b0175..ce15d9e39621 100644 --- a/drivers/scsi/ibmvscsi/iseries_vscsi.c +++ b/drivers/scsi/ibmvscsi/iseries_vscsi.c @@ -117,9 +117,10 @@ void ibmvscsi_release_crq_queue(struct crq_queue *queue, * * no-op for iSeries */ -void ibmvscsi_reset_crq_queue(struct crq_queue *queue, +int ibmvscsi_reset_crq_queue(struct crq_queue *queue, struct ibmvscsi_host_data *hostdata) { + return 0; } /** diff --git a/drivers/scsi/ibmvscsi/rpa_vscsi.c b/drivers/scsi/ibmvscsi/rpa_vscsi.c index 8bf5652f1060..75db2f5c545e 100644 --- a/drivers/scsi/ibmvscsi/rpa_vscsi.c +++ b/drivers/scsi/ibmvscsi/rpa_vscsi.c @@ -230,6 +230,11 @@ int ibmvscsi_init_crq_queue(struct crq_queue *queue, rc = plpar_hcall_norets(H_REG_CRQ, vdev->unit_address, queue->msg_token, PAGE_SIZE); + if (rc == H_Resource) + /* maybe kexecing and resource is busy. try a reset */ + rc = ibmvscsi_reset_crq_queue(queue, + hostdata); + if (rc == 2) { /* Adapter is good, but other end is not ready */ printk(KERN_WARNING "ibmvscsi: Partner adapter not ready\n"); @@ -281,7 +286,7 @@ int ibmvscsi_init_crq_queue(struct crq_queue *queue, * @hostdata: ibmvscsi_host_data of host * */ -void ibmvscsi_reset_crq_queue(struct crq_queue *queue, +int ibmvscsi_reset_crq_queue(struct crq_queue *queue, struct ibmvscsi_host_data *hostdata) { int rc; @@ -309,4 +314,5 @@ void ibmvscsi_reset_crq_queue(struct crq_queue *queue, printk(KERN_WARNING "ibmvscsi: couldn't register crq--rc 0x%x\n", rc); } + return rc; } -- cgit v1.2.3-59-g8ed1b From 23443b1d6130eff8e1335e4f84eaf0577a331dcf Mon Sep 17 00:00:00 2001 From: Andrew Vasquez Date: Tue, 6 Dec 2005 10:57:06 -0800 Subject: [SCSI] qla2xxx: Correct mis-handling of AENs. A regression in a recent change 33135aa2a568ec1a30e734f18e5315e10516e4f3 caused the driver to mistakenly drop handling of AENs. Due to the incorrect handling, ports would not reappear after RSCNs and LIPs. Drops unused/incorrect compound #define from qla_def.h. Signed-off-by: Andrew Vasquez Signed-off-by: James Bottomley --- drivers/scsi/qla2xxx/qla_def.h | 10 +--------- drivers/scsi/qla2xxx/qla_init.c | 6 +++--- 2 files changed, 4 insertions(+), 12 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/qla2xxx/qla_def.h b/drivers/scsi/qla2xxx/qla_def.h index 7096945ea234..7b3efd531297 100644 --- a/drivers/scsi/qla2xxx/qla_def.h +++ b/drivers/scsi/qla2xxx/qla_def.h @@ -2476,17 +2476,9 @@ typedef struct scsi_qla_host { */ #define LOOP_TRANSITION(ha) \ (test_bit(ISP_ABORT_NEEDED, &ha->dpc_flags) || \ - test_bit(LOOP_RESYNC_NEEDED, &ha->dpc_flags)) - -#define LOOP_NOT_READY(ha) \ - ((test_bit(ISP_ABORT_NEEDED, &ha->dpc_flags) || \ - test_bit(ABORT_ISP_ACTIVE, &ha->dpc_flags) || \ - test_bit(LOOP_RESYNC_NEEDED, &ha->dpc_flags) || \ - test_bit(LOOP_RESYNC_ACTIVE, &ha->dpc_flags)) || \ + test_bit(LOOP_RESYNC_NEEDED, &ha->dpc_flags) || \ atomic_read(&ha->loop_state) == LOOP_DOWN) -#define LOOP_RDY(ha) (!LOOP_NOT_READY(ha)) - #define TGT_Q(ha, t) (ha->otgt[t]) #define to_qla_host(x) ((scsi_qla_host_t *) (x)->hostdata) diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c index 2d720121a0d3..c46d2469b85f 100644 --- a/drivers/scsi/qla2xxx/qla_init.c +++ b/drivers/scsi/qla2xxx/qla_init.c @@ -1259,7 +1259,7 @@ qla2x00_configure_hba(scsi_qla_host_t *ha) rval = qla2x00_get_adapter_id(ha, &loop_id, &al_pa, &area, &domain, &topo); if (rval != QLA_SUCCESS) { - if (LOOP_NOT_READY(ha) || atomic_read(&ha->loop_down_timer) || + if (LOOP_TRANSITION(ha) || atomic_read(&ha->loop_down_timer) || (rval == QLA_COMMAND_ERROR && loop_id == 0x7)) { DEBUG2(printk("%s(%ld) Loop is in a transition state\n", __func__, ha->host_no)); @@ -1796,7 +1796,7 @@ qla2x00_configure_loop(scsi_qla_host_t *ha) } if (rval == QLA_SUCCESS && test_bit(RSCN_UPDATE, &flags)) { - if (LOOP_NOT_READY(ha)) { + if (LOOP_TRANSITION(ha)) { rval = QLA_FUNCTION_FAILED; } else { rval = qla2x00_configure_fabric(ha); @@ -2369,7 +2369,7 @@ qla2x00_find_all_fabric_devs(scsi_qla_host_t *ha, struct list_head *new_fcports) if (qla2x00_is_reserved_id(ha, loop_id)) continue; - if (atomic_read(&ha->loop_down_timer) || LOOP_NOT_READY(ha)) + if (atomic_read(&ha->loop_down_timer) || LOOP_TRANSITION(ha)) break; if (swl != NULL) { -- cgit v1.2.3-59-g8ed1b From 0da69df1e54146eece38e0a144051f6dd3526821 Mon Sep 17 00:00:00 2001 From: Andrew Vasquez Date: Tue, 6 Dec 2005 10:58:06 -0800 Subject: [SCSI] qla2xxx: Correct short-WRITE status handling. Properly check FC_RESID for any non-transfered bytes regardless of firmware completion status. Signed-off-by: Andrew Vasquez Signed-off-by: James Bottomley --- drivers/scsi/qla2xxx/qla_isr.c | 15 +++++++++++++++ 1 file changed, 15 insertions(+) (limited to 'drivers') diff --git a/drivers/scsi/qla2xxx/qla_isr.c b/drivers/scsi/qla2xxx/qla_isr.c index 09afc0f06bd4..5181d966fecb 100644 --- a/drivers/scsi/qla2xxx/qla_isr.c +++ b/drivers/scsi/qla2xxx/qla_isr.c @@ -909,6 +909,21 @@ qla2x00_status_entry(scsi_qla_host_t *ha, void *pkt) resid = resid_len; cp->resid = resid; CMD_RESID_LEN(cp) = resid; + + if (!lscsi_status && + ((unsigned)(cp->request_bufflen - resid) < + cp->underflow)) { + qla_printk(KERN_INFO, ha, + "scsi(%ld:%d:%d:%d): Mid-layer underflow " + "detected (%x of %x bytes)...returning " + "error status.\n", ha->host_no, + cp->device->channel, cp->device->id, + cp->device->lun, resid, + cp->request_bufflen); + + cp->result = DID_ERROR << 16; + break; + } } cp->result = DID_OK << 16 | lscsi_status; -- cgit v1.2.3-59-g8ed1b From f0353301e6752399ceb874ede7f44e3571c5e4f3 Mon Sep 17 00:00:00 2001 From: Mark Lord Date: Wed, 7 Dec 2005 17:46:57 -0500 Subject: [SCSI] Fix incorrect pointer in megaraid.c MODE_SENSE emulation The SCSI megaraid drive goes to great effort to kmap the scatterlist buffer (if used), but then uses the wrong pointer when copying to it afterward. Signed-off-by: Mark Lord Acked by: Ju, Seokmann Signed-off-by: James Bottomley --- drivers/scsi/megaraid.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/scsi/megaraid.c b/drivers/scsi/megaraid.c index f9792528e33f..578143e93a6f 100644 --- a/drivers/scsi/megaraid.c +++ b/drivers/scsi/megaraid.c @@ -664,7 +664,7 @@ mega_build_cmd(adapter_t *adapter, Scsi_Cmnd *cmd, int *busy) sg->offset; } else buf = cmd->request_buffer; - memset(cmd->request_buffer, 0, cmd->cmnd[4]); + memset(buf, 0, cmd->cmnd[4]); if (cmd->use_sg) { struct scatterlist *sg; -- cgit v1.2.3-59-g8ed1b From 85631672e6a8032267058b4ccbe53f1924a5d0be Mon Sep 17 00:00:00 2001 From: Michael Reed Date: Wed, 7 Dec 2005 21:46:27 -0600 Subject: [SCSI] fix OOPS due to clearing eh_action prior to aborting eh command The eh_action semaphore in scsi_eh_send_command is cleared after a command timeout. The command is subsequently aborted and the abort will try to call scsi_done() on it. Unfortunately, the scsi_eh_done() routine unconditinally completes the semaphore (which is now null). Fix this race by makiong the scsi_eh_done() routine check that the semaphore is non null before completing it (mirroring the ordinary command done/timeout logic). Signed-off-by: James Bottomley --- drivers/scsi/scsi_error.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/scsi/scsi_error.c b/drivers/scsi/scsi_error.c index 18c5d2523014..c0ae9e965f6f 100644 --- a/drivers/scsi/scsi_error.c +++ b/drivers/scsi/scsi_error.c @@ -422,10 +422,15 @@ static int scsi_eh_completed_normally(struct scsi_cmnd *scmd) **/ static void scsi_eh_done(struct scsi_cmnd *scmd) { + struct completion *eh_action; + SCSI_LOG_ERROR_RECOVERY(3, printk("%s scmd: %p result: %x\n", __FUNCTION__, scmd, scmd->result)); - complete(scmd->device->host->eh_action); + + eh_action = scmd->device->host->eh_action; + if (eh_action) + complete(eh_action); } /** -- cgit v1.2.3-59-g8ed1b From a8c730e85e80734412f4f73ab28496a0e8b04a7b Mon Sep 17 00:00:00 2001 From: Jens Axboe Date: Fri, 9 Dec 2005 14:42:16 +0100 Subject: [SCSI] fix panic when ejecting ieee1394 ipod The scsi_library routines don't correctly set DMA_NONE when req->data_len is zero (instead they check the command type first, so if it's write, we end up with req->data_len == 0 and direction as DMA_TO_DEVICE which confuses some drivers) Signed-off-by: James Bottomley --- drivers/scsi/scsi_lib.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c index 4afef5cdcb17..097888721ec4 100644 --- a/drivers/scsi/scsi_lib.c +++ b/drivers/scsi/scsi_lib.c @@ -1215,12 +1215,12 @@ static int scsi_prep_fn(struct request_queue *q, struct request *req) } else { memcpy(cmd->cmnd, req->cmd, sizeof(cmd->cmnd)); cmd->cmd_len = req->cmd_len; - if (rq_data_dir(req) == WRITE) + if (!req->data_len) + cmd->sc_data_direction = DMA_NONE; + else if (rq_data_dir(req) == WRITE) cmd->sc_data_direction = DMA_TO_DEVICE; - else if (req->data_len) - cmd->sc_data_direction = DMA_FROM_DEVICE; else - cmd->sc_data_direction = DMA_NONE; + cmd->sc_data_direction = DMA_FROM_DEVICE; cmd->transfersize = req->data_len; cmd->allowed = 3; -- cgit v1.2.3-59-g8ed1b From 1a68de5c08be8c77c4ad208306187bd95107c7cd Mon Sep 17 00:00:00 2001 From: Brian King Date: Mon, 12 Dec 2005 13:05:08 -0600 Subject: [SCSI] fix double free of scsi request queue Current scsi scanning code appears to have a use after free bug is a LLDD's slave_alloc fails. Remove the redundant scsi_free_queue. Signed-off-by: Brian King Signed-off-by: James Bottomley --- drivers/scsi/scsi_scan.c | 1 - 1 file changed, 1 deletion(-) (limited to 'drivers') diff --git a/drivers/scsi/scsi_scan.c b/drivers/scsi/scsi_scan.c index 374853df9cca..be276ea8f033 100644 --- a/drivers/scsi/scsi_scan.c +++ b/drivers/scsi/scsi_scan.c @@ -279,7 +279,6 @@ static struct scsi_device *scsi_alloc_sdev(struct scsi_target *starget, out_device_destroy: transport_destroy_device(&sdev->sdev_gendev); - scsi_free_queue(sdev->request_queue); put_device(&sdev->sdev_gendev); out: if (display_failure_msg) -- cgit v1.2.3-59-g8ed1b From 48622b7bde008387218a416586e9d072b385f1ae Mon Sep 17 00:00:00 2001 From: Stefan Richter Date: Thu, 1 Dec 2005 18:51:52 -0500 Subject: ieee1394: resume remote ports when starting a host (fixes device recognition) After initializing an IEEE 1394 host, broadcast a resume packet. This makes remote nodes visible which suspended their ports while the host was down. Such nodes had to be unplugged and replugged in order to be recognized. Motorola DCT6200 cable reciever was affected, probably other devices too. http://marc.theaimsgroup.com/?t=113202715800001 Signed-off-by: Stefan Richter Signed-off-by: Jody McIntyre (cherry picked from 14c0fa243b358c24040ff5f44b60c47aaf6430c3 commit) --- drivers/ieee1394/hosts.h | 1 + drivers/ieee1394/nodemgr.c | 25 +++++++++++++++++++++++++ 2 files changed, 26 insertions(+) (limited to 'drivers') diff --git a/drivers/ieee1394/hosts.h b/drivers/ieee1394/hosts.h index 38f42112dff0..ae9b02cc013f 100644 --- a/drivers/ieee1394/hosts.h +++ b/drivers/ieee1394/hosts.h @@ -41,6 +41,7 @@ struct hpsb_host { /* this nodes state */ unsigned in_bus_reset:1; unsigned is_shutdown:1; + unsigned resume_packet_sent:1; /* this nodes' duties on the bus */ unsigned is_root:1; diff --git a/drivers/ieee1394/nodemgr.c b/drivers/ieee1394/nodemgr.c index 7fff5a1d2ea4..f7c3dbaf5802 100644 --- a/drivers/ieee1394/nodemgr.c +++ b/drivers/ieee1394/nodemgr.c @@ -1413,6 +1413,24 @@ static void nodemgr_node_probe(struct host_info *hi, int generation) return; } +static int nodemgr_send_resume_packet(struct hpsb_host *host) +{ + struct hpsb_packet *packet; + int ret = 1; + + packet = hpsb_make_phypacket(host, + 0x003c0000 | NODEID_TO_NODE(host->node_id) << 24); + if (packet) { + packet->no_waiter = 1; + packet->generation = get_hpsb_generation(host); + ret = hpsb_send_packet(packet); + } + if (ret) + HPSB_WARN("fw-host%d: Failed to broadcast resume packet", + host->id); + return ret; +} + /* Because we are a 1394a-2000 compliant IRM, we need to inform all the other * nodes of the broadcast channel. (Really we're only setting the validity * bit). Other IRM responsibilities go in here as well. */ @@ -1463,6 +1481,13 @@ static int nodemgr_do_irm_duties(struct hpsb_host *host, int cycles) } } + /* Some devices suspend their ports while being connected to an inactive + * host adapter, i.e. if connected before the low-level driver is + * loaded. They become visible either when physically unplugged and + * replugged, or when receiving a resume packet. Send one once. */ + if (!host->resume_packet_sent && !nodemgr_send_resume_packet(host)) + host->resume_packet_sent = 1; + return 1; } -- cgit v1.2.3-59-g8ed1b From d51e86c18a479f1dbcef3aa20e58ad04d1233016 Mon Sep 17 00:00:00 2001 From: Stefan Richter Date: Mon, 5 Dec 2005 16:28:59 -0500 Subject: ieee1394: write broadcast_channel only to select nodes (fixes device recognition) Some old 1394-1995 SBP-2 bridges would hang if they received a broadcast write request to BROADCAST_CHANNEL before the config ROM was read. Affected devices include Datafab MD2-FW2 2.5" HDD and SmartDisk VST FWCDRW-V8 portable CD writer. The write request is now directed to specific nodes instead of being broadcast to all nodes at once, and it is only performed if a previous read request at this register succeeded. Fixes an old interoperability problem which was perceived as a 2.6.14-specific regression: http://marc.theaimsgroup.com/?t=113190586800003 Signed-off-by: Stefan Richter Signed-off-by: Jody McIntyre (cherry picked from 61c7f775ca25ccfc0e51486103a724fb1a3a08f2 commit) --- drivers/ieee1394/nodemgr.c | 42 ++++++++++++++++++++++++++++++++---------- 1 file changed, 32 insertions(+), 10 deletions(-) (limited to 'drivers') diff --git a/drivers/ieee1394/nodemgr.c b/drivers/ieee1394/nodemgr.c index f7c3dbaf5802..0ea37b1bccb2 100644 --- a/drivers/ieee1394/nodemgr.c +++ b/drivers/ieee1394/nodemgr.c @@ -1349,6 +1349,33 @@ static void nodemgr_update_pdrv(struct node_entry *ne) } +/* Write the BROADCAST_CHANNEL as per IEEE1394a 8.3.2.3.11 and 8.4.2.3. This + * seems like an optional service but in the end it is practically mandatory + * as a consequence of these clauses. + * + * Note that we cannot do a broadcast write to all nodes at once because some + * pre-1394a devices would hang. */ +static void nodemgr_irm_write_bc(struct node_entry *ne, int generation) +{ + const u64 bc_addr = (CSR_REGISTER_BASE | CSR_BROADCAST_CHANNEL); + quadlet_t bc_remote, bc_local; + int ret; + + if (!ne->host->is_irm || ne->generation != generation || + ne->nodeid == ne->host->node_id) + return; + + bc_local = cpu_to_be32(ne->host->csr.broadcast_channel); + + /* Check if the register is implemented and 1394a compliant. */ + ret = hpsb_read(ne->host, ne->nodeid, generation, bc_addr, &bc_remote, + sizeof(bc_remote)); + if (!ret && bc_remote & cpu_to_be32(0x80000000) && + bc_remote != bc_local) + hpsb_node_write(ne, bc_addr, &bc_local, sizeof(bc_local)); +} + + static void nodemgr_probe_ne(struct host_info *hi, struct node_entry *ne, int generation) { struct device *dev; @@ -1360,6 +1387,8 @@ static void nodemgr_probe_ne(struct host_info *hi, struct node_entry *ne, int ge if (!dev) return; + nodemgr_irm_write_bc(ne, generation); + /* If "needs_probe", then this is either a new or changed node we * rescan totally. If the generation matches for an existing node * (one that existed prior to the bus reset) we send update calls @@ -1431,9 +1460,7 @@ static int nodemgr_send_resume_packet(struct hpsb_host *host) return ret; } -/* Because we are a 1394a-2000 compliant IRM, we need to inform all the other - * nodes of the broadcast channel. (Really we're only setting the validity - * bit). Other IRM responsibilities go in here as well. */ +/* Perform a few high-level IRM responsibilities. */ static int nodemgr_do_irm_duties(struct hpsb_host *host, int cycles) { quadlet_t bc; @@ -1442,13 +1469,8 @@ static int nodemgr_do_irm_duties(struct hpsb_host *host, int cycles) if (!host->is_irm || host->irm_id == (nodeid_t)-1) return 1; - host->csr.broadcast_channel |= 0x40000000; /* set validity bit */ - - bc = cpu_to_be32(host->csr.broadcast_channel); - - hpsb_write(host, LOCAL_BUS | ALL_NODES, get_hpsb_generation(host), - (CSR_REGISTER_BASE | CSR_BROADCAST_CHANNEL), - &bc, sizeof(quadlet_t)); + /* We are a 1394a-2000 compliant IRM. Set the validity bit. */ + host->csr.broadcast_channel |= 0x40000000; /* If there is no bus manager then we should set the root node's * force_root bit to promote bus stability per the 1394 -- cgit v1.2.3-59-g8ed1b From 322e079f1b606e46b79bb8b8e6cf6110b5f2aa3f Mon Sep 17 00:00:00 2001 From: Matthew Wilcox Date: Tue, 29 Nov 2005 23:08:40 -0500 Subject: [SCSI] Negotiate correctly with async-only devices When we got a device only capable of async, we would zero out goal->period which would cause us to try PPR negotiations. Leave goal->period alone, and check goal->offset before doing PPR. Kudos to Daniel Forsgren for figuring this out. Signed-off-by: Matthew Wilcox Signed-off-by: James Bottomley --- drivers/scsi/sym53c8xx_2/sym_hipd.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/sym53c8xx_2/sym_hipd.c b/drivers/scsi/sym53c8xx_2/sym_hipd.c index a7420cad4547..1564ca203a3e 100644 --- a/drivers/scsi/sym53c8xx_2/sym_hipd.c +++ b/drivers/scsi/sym53c8xx_2/sym_hipd.c @@ -1405,7 +1405,6 @@ static void sym_check_goals(struct sym_hcb *np, struct scsi_target *starget, goal->iu = 0; goal->dt = 0; goal->qas = 0; - goal->period = 0; goal->offset = 0; return; } @@ -1465,7 +1464,8 @@ static int sym_prepare_nego(struct sym_hcb *np, struct sym_ccb *cp, u_char *msgp * Many devices implement PPR in a buggy way, so only use it if we * really want to. */ - if (goal->iu || goal->dt || goal->qas || (goal->period < 0xa)) { + if (goal->offset && + (goal->iu || goal->dt || goal->qas || (goal->period < 0xa))) { nego = NS_PPR; } else if (spi_width(starget) != goal->width) { nego = NS_WIDE; -- cgit v1.2.3-59-g8ed1b From 381291b7d3e17ac966498312dc571dcca1b93efc Mon Sep 17 00:00:00 2001 From: Michael Chan Date: Tue, 13 Dec 2005 21:08:21 -0800 Subject: [TG3]: Fix nvram arbitration bugs. The nvram arbitration rules were not strictly followed in a few places and this could lead to reading corrupted values from the nvram. Signed-off-by: Michael Chan Signed-off-by: David S. Miller --- drivers/net/tg3.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c index 47bd4a394420..dabc39befd3c 100644 --- a/drivers/net/tg3.c +++ b/drivers/net/tg3.c @@ -8533,6 +8533,7 @@ static void __devinit tg3_nvram_init(struct tg3 *tp) GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5701) { tp->tg3_flags |= TG3_FLAG_NVRAM; + tg3_nvram_lock(tp); tg3_enable_nvram_access(tp); if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5752) @@ -8543,6 +8544,7 @@ static void __devinit tg3_nvram_init(struct tg3 *tp) tg3_get_nvram_size(tp); tg3_disable_nvram_access(tp); + tg3_nvram_unlock(tp); } else { tp->tg3_flags &= ~(TG3_FLAG_NVRAM | TG3_FLAG_NVRAM_BUFFERED); @@ -8640,10 +8642,10 @@ static int tg3_nvram_read(struct tg3 *tp, u32 offset, u32 *val) if (ret == 0) *val = swab32(tr32(NVRAM_RDDATA)); - tg3_nvram_unlock(tp); - tg3_disable_nvram_access(tp); + tg3_nvram_unlock(tp); + return ret; } @@ -8728,6 +8730,10 @@ static int tg3_nvram_write_block_unbuffered(struct tg3 *tp, u32 offset, u32 len, offset = offset + (pagesize - page_off); + /* Nvram lock released by tg3_nvram_read() above, + * so need to get it again. + */ + tg3_nvram_lock(tp); tg3_enable_nvram_access(tp); /* -- cgit v1.2.3-59-g8ed1b From 6a9eba15f51c56da637e45ea1316eaa2a848986a Mon Sep 17 00:00:00 2001 From: Michael Chan Date: Tue, 13 Dec 2005 21:08:58 -0800 Subject: [TG3]: Fix suspend and resume Fix tg3_suspend() and tg3_resume() by clearing and setting the TG3_FLAG_INIT_COMPLETE flag when appropriate. tg3_set_power_state() looks at TG3_FLAG_INIT_COMPLETE on the peer device to determine when to appropriately switch to aux power. Signed-off-by: Michael Chan Signed-off-by: David S. Miller --- drivers/net/tg3.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers') diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c index dabc39befd3c..6b7ab4b72752 100644 --- a/drivers/net/tg3.c +++ b/drivers/net/tg3.c @@ -10826,12 +10826,14 @@ static int tg3_suspend(struct pci_dev *pdev, pm_message_t state) tg3_full_lock(tp, 0); tg3_halt(tp, RESET_KIND_SHUTDOWN, 1); + tp->tg3_flags &= ~TG3_FLAG_INIT_COMPLETE; tg3_full_unlock(tp); err = tg3_set_power_state(tp, pci_choose_state(pdev, state)); if (err) { tg3_full_lock(tp, 0); + tp->tg3_flags |= TG3_FLAG_INIT_COMPLETE; tg3_init_hw(tp); tp->timer.expires = jiffies + tp->timer_offset; @@ -10865,6 +10867,7 @@ static int tg3_resume(struct pci_dev *pdev) tg3_full_lock(tp, 0); + tp->tg3_flags |= TG3_FLAG_INIT_COMPLETE; tg3_init_hw(tp); tp->timer.expires = jiffies + tp->timer_offset; -- cgit v1.2.3-59-g8ed1b From 16fe9d74f14ed74af778c5db7f9129e29916f4a7 Mon Sep 17 00:00:00 2001 From: Michael Chan Date: Tue, 13 Dec 2005 21:09:54 -0800 Subject: [TG3]: Fix 5704 single-port mode If the dual-port 5704 is configured as a single-port device with only one PCI function, it would trigger a BUG() condition in tg3_find_5704_peer(). This fixes the problem by returning its own pdev if the peer cannot be found. Signed-off-by: Michael Chan Signed-off-by: David S. Miller --- drivers/net/tg3.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c index 6b7ab4b72752..a143c18c7bc6 100644 --- a/drivers/net/tg3.c +++ b/drivers/net/tg3.c @@ -10443,8 +10443,13 @@ static struct pci_dev * __devinit tg3_find_5704_peer(struct tg3 *tp) break; pci_dev_put(peer); } - if (!peer || peer == tp->pdev) - BUG(); + /* 5704 can be configured in single-port mode, set peer to + * tp->pdev in that case. + */ + if (!peer) { + peer = tp->pdev; + return peer; + } /* * We don't need to keep the refcount elevated; there's no way -- cgit v1.2.3-59-g8ed1b From 6921d201f77e14848df2eaa597e26525f468abea Mon Sep 17 00:00:00 2001 From: Michael Chan Date: Tue, 13 Dec 2005 21:15:53 -0800 Subject: [TG3]: Fix low power state Fix the following bugs in tg3_set_power_state(): 1. Both WOL and ASF flags require switching to aux power. 2. Add a missing handshake with firmware to enable WOL. 3. Turn off the PHY if both WOL and ASF are disabled. 4. Add nvram arbitration before halting the firmware. 5. Fix tg3_setup_copper_phy() to switch to 100Mbps when changing to low power state. Update revision and date. Signed-off-by: Michael Chan Signed-off-by: David S. Miller --- drivers/net/tg3.c | 44 +++++++++++++++++++++++++++++++++++++++----- drivers/net/tg3.h | 7 +++++++ 2 files changed, 46 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c index a143c18c7bc6..a23ed28a72b8 100644 --- a/drivers/net/tg3.c +++ b/drivers/net/tg3.c @@ -68,8 +68,8 @@ #define DRV_MODULE_NAME "tg3" #define PFX DRV_MODULE_NAME ": " -#define DRV_MODULE_VERSION "3.44" -#define DRV_MODULE_RELDATE "Dec 6, 2005" +#define DRV_MODULE_VERSION "3.45" +#define DRV_MODULE_RELDATE "Dec 13, 2005" #define TG3_DEF_MAC_MODE 0 #define TG3_DEF_RX_MODE 0 @@ -1025,7 +1025,9 @@ static void tg3_frob_aux_power(struct tg3 *tp) if ((tp->tg3_flags & TG3_FLAG_WOL_ENABLE) != 0 || - (tp_peer->tg3_flags & TG3_FLAG_WOL_ENABLE) != 0) { + (tp->tg3_flags & TG3_FLAG_ENABLE_ASF) != 0 || + (tp_peer->tg3_flags & TG3_FLAG_WOL_ENABLE) != 0 || + (tp_peer->tg3_flags & TG3_FLAG_ENABLE_ASF) != 0) { if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5700 || GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5701) { tw32_f(GRC_LOCAL_CTRL, tp->grc_local_ctrl | @@ -1105,6 +1107,8 @@ static int tg3_setup_phy(struct tg3 *, int); static void tg3_write_sig_post_reset(struct tg3 *, int); static int tg3_halt_cpu(struct tg3 *, u32); +static int tg3_nvram_lock(struct tg3 *); +static void tg3_nvram_unlock(struct tg3 *); static int tg3_set_power_state(struct tg3 *tp, int state) { @@ -1179,6 +1183,21 @@ static int tg3_set_power_state(struct tg3 *tp, int state) tg3_setup_phy(tp, 0); } + if (!(tp->tg3_flags & TG3_FLAG_ENABLE_ASF)) { + int i; + u32 val; + + for (i = 0; i < 200; i++) { + tg3_read_mem(tp, NIC_SRAM_FW_ASF_STATUS_MBOX, &val); + if (val == ~NIC_SRAM_FIRMWARE_MBOX_MAGIC1) + break; + msleep(1); + } + } + tg3_write_mem(tp, NIC_SRAM_WOL_MBOX, WOL_SIGNATURE | + WOL_DRV_STATE_SHUTDOWN | + WOL_DRV_WOL | WOL_SET_MAGIC_PKT); + pci_read_config_word(tp->pdev, pm + PCI_PM_PMC, &power_caps); if (tp->tg3_flags & TG3_FLAG_WOL_ENABLE) { @@ -1268,6 +1287,17 @@ static int tg3_set_power_state(struct tg3 *tp, int state) } } + if (!(tp->tg3_flags & TG3_FLAG_WOL_ENABLE) && + !(tp->tg3_flags & TG3_FLAG_ENABLE_ASF)) { + /* Turn off the PHY */ + if (!(tp->tg3_flags2 & TG3_FLG2_PHY_SERDES)) { + tg3_writephy(tp, MII_TG3_EXT_CTRL, + MII_TG3_EXT_CTRL_FORCE_LED_OFF); + tg3_writephy(tp, MII_TG3_AUX_CTRL, 0x01b2); + tg3_writephy(tp, MII_BMCR, BMCR_PDOWN); + } + } + tg3_frob_aux_power(tp); /* Workaround for unstable PLL clock */ @@ -1277,8 +1307,12 @@ static int tg3_set_power_state(struct tg3 *tp, int state) val &= ~((1 << 16) | (1 << 4) | (1 << 2) | (1 << 1) | 1); tw32(0x7d00, val); - if (!(tp->tg3_flags & TG3_FLAG_ENABLE_ASF)) + if (!(tp->tg3_flags & TG3_FLAG_ENABLE_ASF)) { + tg3_nvram_lock(tp); tg3_halt_cpu(tp, RX_CPU_BASE); + tw32_f(NVRAM_SWARB, SWARB_REQ_CLR0); + tg3_nvram_unlock(tp); + } } /* Finally, set the new power state. */ @@ -1812,7 +1846,7 @@ static int tg3_setup_copper_phy(struct tg3 *tp, int force_reset) } } relink: - if (current_link_up == 0) { + if (current_link_up == 0 || tp->link_config.phy_is_low_power) { u32 tmp; tg3_phy_copper_begin(tp); diff --git a/drivers/net/tg3.h b/drivers/net/tg3.h index fb7e2a5f4a08..94dbcf3537ec 100644 --- a/drivers/net/tg3.h +++ b/drivers/net/tg3.h @@ -1529,6 +1529,12 @@ #define NIC_SRAM_MAC_ADDR_HIGH_MBOX 0x00000c14 #define NIC_SRAM_MAC_ADDR_LOW_MBOX 0x00000c18 +#define NIC_SRAM_WOL_MBOX 0x00000d30 +#define WOL_SIGNATURE 0x474c0000 +#define WOL_DRV_STATE_SHUTDOWN 0x00000001 +#define WOL_DRV_WOL 0x00000002 +#define WOL_SET_MAGIC_PKT 0x00000004 + #define NIC_SRAM_DATA_CFG_2 0x00000d38 #define SHASTA_EXT_LED_MODE_MASK 0x00018000 @@ -1565,6 +1571,7 @@ #define MII_TG3_EXT_CTRL 0x10 /* Extended control register */ #define MII_TG3_EXT_CTRL_FIFO_ELASTIC 0x0001 #define MII_TG3_EXT_CTRL_LNK3_LED_MODE 0x0002 +#define MII_TG3_EXT_CTRL_FORCE_LED_OFF 0x0008 #define MII_TG3_EXT_CTRL_TBI 0x8000 #define MII_TG3_EXT_STAT 0x11 /* Extended status register */ -- cgit v1.2.3-59-g8ed1b From fb79ffa4ddbe3f6f30fdb8429b5bad84d25ae6ef Mon Sep 17 00:00:00 2001 From: Ole Reinhardt Date: Tue, 13 Dec 2005 17:03:38 -0800 Subject: [PATCH] fbdev: make pxafb more robust to errors with CONFIG_FB_PXA_PARAMETERS pxafb.c runs into an oops if CONFIG_FB_PXA_PARAMETERS is enabled and no parameters are set in command line. The following patch avoids this problem. Signed-off-by: Nicolas Pitre Cc: "Antonino A. Daplas" Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/video/pxafb.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/video/pxafb.c b/drivers/video/pxafb.c index 7b4cd250bec8..9fc10b9e6f57 100644 --- a/drivers/video/pxafb.c +++ b/drivers/video/pxafb.c @@ -1396,7 +1396,8 @@ static struct platform_driver pxafb_driver = { int __devinit pxafb_setup(char *options) { # ifdef CONFIG_FB_PXA_PARAMETERS - strlcpy(g_options, options, sizeof(g_options)); + if (options) + strlcpy(g_options, options, sizeof(g_options)); # endif return 0; } -- cgit v1.2.3-59-g8ed1b From cd6104572bca9e4afe0dcdb8ecd65ef90b01297b Mon Sep 17 00:00:00 2001 From: Adam Kropelin Date: Tue, 13 Dec 2005 17:03:39 -0800 Subject: [PATCH] hid-core: Zero-pad truncated reports When it detects a truncated report, hid-core emits a warning and then processes the report as usual. This is good because it allows buggy devices to still get data thru to userspace. However, the missing bytes of the report should be cleared before processing, otherwise userspace will be handed partially-uninitialized data. This fixes Debian tracker bug #330487. Signed-off-by: Adam Kropelin Cc: Vojtech Pavlik Acked-by: Dmitry Torokhov Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/usb/input/hid-core.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/usb/input/hid-core.c b/drivers/usb/input/hid-core.c index 45f3130fadea..a3e44ef1df43 100644 --- a/drivers/usb/input/hid-core.c +++ b/drivers/usb/input/hid-core.c @@ -893,8 +893,10 @@ static int hid_input_report(int type, struct urb *urb, int interrupt, struct pt_ size = ((report->size - 1) >> 3) + 1; - if (len < size) + if (len < size) { dbg("report %d is too short, (%d < %d)", report->id, len, size); + memset(data + len, 0, size - len); + } if (hid->claimed & HID_CLAIMED_HIDDEV) hiddev_report_event(hid, report); -- cgit v1.2.3-59-g8ed1b From c9526497cf03ee775c3a6f8ba62335735f98de7a Mon Sep 17 00:00:00 2001 From: James Bottomley Date: Fri, 9 Dec 2005 17:45:22 -0500 Subject: [SCSI] Consolidate REQ_BLOCK_PC handling path (fix ipod panic) This follows on from Jens' patch and consolidates all of the ULD separate handlers for REQ_BLOCK_PC into a single call which has his fix for our direction bug. Signed-off-by: James Bottomley --- drivers/scsi/scsi_lib.c | 33 +++++++++++++++++++++------------ drivers/scsi/sd.c | 16 +--------------- drivers/scsi/sr.c | 20 +++----------------- drivers/scsi/st.c | 19 +------------------ include/scsi/scsi_cmnd.h | 1 + 5 files changed, 27 insertions(+), 62 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c index 097888721ec4..9be5769d44aa 100644 --- a/drivers/scsi/scsi_lib.c +++ b/drivers/scsi/scsi_lib.c @@ -1078,6 +1078,26 @@ static void scsi_generic_done(struct scsi_cmnd *cmd) scsi_io_completion(cmd, cmd->result == 0 ? cmd->bufflen : 0, 0); } +void scsi_setup_blk_pc_cmnd(struct scsi_cmnd *cmd, int retries) +{ + struct request *req = cmd->request; + + BUG_ON(sizeof(req->cmd) > sizeof(cmd->cmnd)); + memcpy(cmd->cmnd, req->cmd, sizeof(cmd->cmnd)); + cmd->cmd_len = req->cmd_len; + if (!req->data_len) + cmd->sc_data_direction = DMA_NONE; + else if (rq_data_dir(req) == WRITE) + cmd->sc_data_direction = DMA_TO_DEVICE; + else + cmd->sc_data_direction = DMA_FROM_DEVICE; + + cmd->transfersize = req->data_len; + cmd->allowed = retries; + cmd->timeout_per_command = req->timeout; +} +EXPORT_SYMBOL_GPL(scsi_setup_blk_pc_cmnd); + static int scsi_prep_fn(struct request_queue *q, struct request *req) { struct scsi_device *sdev = q->queuedata; @@ -1213,18 +1233,7 @@ static int scsi_prep_fn(struct request_queue *q, struct request *req) goto kill; } } else { - memcpy(cmd->cmnd, req->cmd, sizeof(cmd->cmnd)); - cmd->cmd_len = req->cmd_len; - if (!req->data_len) - cmd->sc_data_direction = DMA_NONE; - else if (rq_data_dir(req) == WRITE) - cmd->sc_data_direction = DMA_TO_DEVICE; - else - cmd->sc_data_direction = DMA_FROM_DEVICE; - - cmd->transfersize = req->data_len; - cmd->allowed = 3; - cmd->timeout_per_command = req->timeout; + scsi_setup_blk_pc_cmnd(cmd, 3); cmd->done = scsi_generic_done; } } diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c index 8613a1317712..03fcbab30033 100644 --- a/drivers/scsi/sd.c +++ b/drivers/scsi/sd.c @@ -245,24 +245,10 @@ static int sd_init_command(struct scsi_cmnd * SCpnt) * SG_IO from block layer already setup, just copy cdb basically */ if (blk_pc_request(rq)) { - if (sizeof(rq->cmd) > sizeof(SCpnt->cmnd)) - return 0; - - memcpy(SCpnt->cmnd, rq->cmd, sizeof(SCpnt->cmnd)); - SCpnt->cmd_len = rq->cmd_len; - if (rq_data_dir(rq) == WRITE) - SCpnt->sc_data_direction = DMA_TO_DEVICE; - else if (rq->data_len) - SCpnt->sc_data_direction = DMA_FROM_DEVICE; - else - SCpnt->sc_data_direction = DMA_NONE; - - this_count = rq->data_len; + scsi_setup_blk_pc_cmnd(SCpnt, SD_PASSTHROUGH_RETRIES); if (rq->timeout) timeout = rq->timeout; - SCpnt->transfersize = rq->data_len; - SCpnt->allowed = SD_PASSTHROUGH_RETRIES; goto queue; } diff --git a/drivers/scsi/sr.c b/drivers/scsi/sr.c index d68cea753bb2..fb4012b5c188 100644 --- a/drivers/scsi/sr.c +++ b/drivers/scsi/sr.c @@ -320,25 +320,11 @@ static int sr_init_command(struct scsi_cmnd * SCpnt) * these are already setup, just copy cdb basically */ if (SCpnt->request->flags & REQ_BLOCK_PC) { - struct request *rq = SCpnt->request; + scsi_setup_blk_pc_cmnd(SCpnt, MAX_RETRIES); - if (sizeof(rq->cmd) > sizeof(SCpnt->cmnd)) - return 0; - - memcpy(SCpnt->cmnd, rq->cmd, sizeof(SCpnt->cmnd)); - SCpnt->cmd_len = rq->cmd_len; - if (!rq->data_len) - SCpnt->sc_data_direction = DMA_NONE; - else if (rq_data_dir(rq) == WRITE) - SCpnt->sc_data_direction = DMA_TO_DEVICE; - else - SCpnt->sc_data_direction = DMA_FROM_DEVICE; - - this_count = rq->data_len; - if (rq->timeout) - timeout = rq->timeout; + if (SCpnt->timeout_per_command) + timeout = SCpnt->timeout_per_command; - SCpnt->transfersize = rq->data_len; goto queue; } diff --git a/drivers/scsi/st.c b/drivers/scsi/st.c index 7ac6ea141fff..dd592f6a2529 100644 --- a/drivers/scsi/st.c +++ b/drivers/scsi/st.c @@ -4194,27 +4194,10 @@ static void st_intr(struct scsi_cmnd *SCpnt) */ static int st_init_command(struct scsi_cmnd *SCpnt) { - struct request *rq; - if (!(SCpnt->request->flags & REQ_BLOCK_PC)) return 0; - rq = SCpnt->request; - if (sizeof(rq->cmd) > sizeof(SCpnt->cmnd)) - return 0; - - memcpy(SCpnt->cmnd, rq->cmd, sizeof(SCpnt->cmnd)); - SCpnt->cmd_len = rq->cmd_len; - - if (rq_data_dir(rq) == WRITE) - SCpnt->sc_data_direction = DMA_TO_DEVICE; - else if (rq->data_len) - SCpnt->sc_data_direction = DMA_FROM_DEVICE; - else - SCpnt->sc_data_direction = DMA_NONE; - - SCpnt->timeout_per_command = rq->timeout; - SCpnt->transfersize = rq->data_len; + scsi_setup_blk_pc_cmnd(SCpnt, 0); SCpnt->done = st_intr; return 1; } diff --git a/include/scsi/scsi_cmnd.h b/include/scsi/scsi_cmnd.h index 7529f4388bb4..20da282d4abb 100644 --- a/include/scsi/scsi_cmnd.h +++ b/include/scsi/scsi_cmnd.h @@ -151,5 +151,6 @@ extern struct scsi_cmnd *scsi_get_command(struct scsi_device *, gfp_t); extern void scsi_put_command(struct scsi_cmnd *); extern void scsi_io_completion(struct scsi_cmnd *, unsigned int, unsigned int); extern void scsi_finish_command(struct scsi_cmnd *cmd); +extern void scsi_setup_blk_pc_cmnd(struct scsi_cmnd *cmd, int retries); #endif /* _SCSI_SCSI_CMND_H */ -- cgit v1.2.3-59-g8ed1b From 45f8245b972e360c19aec9032e2a2033b8ac3719 Mon Sep 17 00:00:00 2001 From: Russell King Date: Wed, 14 Dec 2005 14:57:35 +0000 Subject: [MMC] Explain the internals of mmc_power_up() It seems that people get confused about what is happening in mmc_power_up(). Add a comment to make it clear why we have a two stage process. Signed-off-by: Russell King --- drivers/mmc/mmc.c | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/mmc/mmc.c b/drivers/mmc/mmc.c index b586a83a9b4c..eb41391e06e9 100644 --- a/drivers/mmc/mmc.c +++ b/drivers/mmc/mmc.c @@ -679,7 +679,15 @@ static void mmc_idle_cards(struct mmc_host *host) } /* - * Apply power to the MMC stack. + * Apply power to the MMC stack. This is a two-stage process. + * First, we enable power to the card without the clock running. + * We then wait a bit for the power to stabilise. Finally, + * enable the bus drivers and clock to the card. + * + * We must _NOT_ enable the clock prior to power stablising. + * + * If a host does all the power sequencing itself, ignore the + * initial MMC_POWER_UP stage. */ static void mmc_power_up(struct mmc_host *host) { -- cgit v1.2.3-59-g8ed1b From deb5e5c0c68e59b1bf9ede66da9e6a89f6557595 Mon Sep 17 00:00:00 2001 From: Jeremy Higdon Date: Thu, 15 Dec 2005 02:10:35 +0100 Subject: [PATCH] sgiioc4: check for no hwifs available Add a check to the sgiioc4 driver for the case where all available ide_hwifs structures are in use. Signed-off-by: Jeremy Higdon Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/pci/sgiioc4.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/ide/pci/sgiioc4.c b/drivers/ide/pci/sgiioc4.c index af526b671c4e..4ee597d08797 100644 --- a/drivers/ide/pci/sgiioc4.c +++ b/drivers/ide/pci/sgiioc4.c @@ -622,12 +622,18 @@ sgiioc4_ide_setup_pci_device(struct pci_dev *dev, ide_pci_device_t * d) ide_hwif_t *hwif; int h; + /* + * Find an empty HWIF; if none available, return -ENOMEM. + */ for (h = 0; h < MAX_HWIFS; ++h) { hwif = &ide_hwifs[h]; - /* Find an empty HWIF */ if (hwif->chipset == ide_unknown) break; } + if (h == MAX_HWIFS) { + printk(KERN_ERR "%s: too many IDE interfaces, no room in table\n", d->name); + return -ENOMEM; + } /* Get the CmdBlk and CtrlBlk Base Registers */ base = pci_resource_start(dev, 0) + IOC4_CMD_OFFSET; -- cgit v1.2.3-59-g8ed1b From ceef833bae05e393859f1946a9802fb61f0febdf Mon Sep 17 00:00:00 2001 From: Daniel Drake Date: Thu, 15 Dec 2005 02:11:55 +0100 Subject: [PATCH] via82cxxx IDE: Add VT8251 ISA bridge Some motherboards (such as the Asus P5V800-MX) ship a PCI_DEVICE_ID_VIA_82C586_1 IDE controller alongside a VT8251 southbridge. This southbridge is currently unrecognised in the via82cxxx IDE driver, preventing those users from getting DMA access to disks. Signed-off-by: Daniel Drake Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/pci/via82cxxx.c | 1 + include/linux/pci_ids.h | 1 + 2 files changed, 2 insertions(+) (limited to 'drivers') diff --git a/drivers/ide/pci/via82cxxx.c b/drivers/ide/pci/via82cxxx.c index 7161ce0ef5aa..86fb1e0286d3 100644 --- a/drivers/ide/pci/via82cxxx.c +++ b/drivers/ide/pci/via82cxxx.c @@ -80,6 +80,7 @@ static struct via_isa_bridge { u16 flags; } via_isa_bridges[] = { { "vt6410", PCI_DEVICE_ID_VIA_6410, 0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST }, + { "vt8251", PCI_DEVICE_ID_VIA_8251, 0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST }, { "vt8237", PCI_DEVICE_ID_VIA_8237, 0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST }, { "vt8235", PCI_DEVICE_ID_VIA_8235, 0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST }, { "vt8233a", PCI_DEVICE_ID_VIA_8233A, 0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST }, diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h index 1e737e269db9..4db67b3b05cc 100644 --- a/include/linux/pci_ids.h +++ b/include/linux/pci_ids.h @@ -1244,6 +1244,7 @@ #define PCI_DEVICE_ID_VIA_8378_0 0x3205 #define PCI_DEVICE_ID_VIA_8783_0 0x3208 #define PCI_DEVICE_ID_VIA_8237 0x3227 +#define PCI_DEVICE_ID_VIA_8251 0x3287 #define PCI_DEVICE_ID_VIA_3296_0 0x0296 #define PCI_DEVICE_ID_VIA_8231 0x8231 #define PCI_DEVICE_ID_VIA_8231_4 0x8235 -- cgit v1.2.3-59-g8ed1b From 38f9d412be1ed29ee3b41782f22fd85b1c95fbed Mon Sep 17 00:00:00 2001 From: Marcelo Tosatti Date: Thu, 15 Dec 2005 02:12:53 +0100 Subject: [PATCH] ide: MPC8xx IDE depends on IDE=y && BLK_DEV_IDE=y The following patch adds a dependancy on IDE=y && BLK_DEV_IDE=y for the MPC8xx IDE driver. The code is not modular at the moment (init called from platform setup code). Signed-off-by: Marcelo Tosatti Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/ide/Kconfig b/drivers/ide/Kconfig index 31e649a9ff71..45579ae12c01 100644 --- a/drivers/ide/Kconfig +++ b/drivers/ide/Kconfig @@ -940,7 +940,7 @@ config BLK_DEV_Q40IDE config BLK_DEV_MPC8xx_IDE bool "MPC8xx IDE support" - depends on 8xx + depends on 8xx && IDE=y && BLK_DEV_IDE=y help This option provides support for IDE on Motorola MPC8xx Systems. Please see 'Type of MPC8xx IDE interface' for details. -- cgit v1.2.3-59-g8ed1b From 65e5f2e3b457b6b20a5c4481312189d141a33d24 Mon Sep 17 00:00:00 2001 From: Jordan Crouse Date: Thu, 15 Dec 2005 02:16:18 +0100 Subject: [PATCH] ide: core modifications for AU1200 bart: slightly modified by me Signed-off-by: Jordan Crouse Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-dma.c | 15 ++++++--------- include/asm-mips/mach-au1x00/au1xxx_ide.h | 5 ----- include/linux/ide.h | 6 ++++++ 3 files changed, 12 insertions(+), 14 deletions(-) (limited to 'drivers') diff --git a/drivers/ide/ide-dma.c b/drivers/ide/ide-dma.c index 1e1531334c25..0523da77425a 100644 --- a/drivers/ide/ide-dma.c +++ b/drivers/ide/ide-dma.c @@ -90,11 +90,6 @@ #include #include -struct drive_list_entry { - const char *id_model; - const char *id_firmware; -}; - static const struct drive_list_entry drive_whitelist [] = { { "Micropolis 2112A" , "ALL" }, @@ -139,7 +134,7 @@ static const struct drive_list_entry drive_blacklist [] = { }; /** - * in_drive_list - look for drive in black/white list + * ide_in_drive_list - look for drive in black/white list * @id: drive identifier * @drive_table: list to inspect * @@ -147,7 +142,7 @@ static const struct drive_list_entry drive_blacklist [] = { * Returns 1 if the drive is found in the table. */ -static int in_drive_list(struct hd_driveid *id, const struct drive_list_entry *drive_table) +int ide_in_drive_list(struct hd_driveid *id, const struct drive_list_entry *drive_table) { for ( ; drive_table->id_model ; drive_table++) if ((!strcmp(drive_table->id_model, id->model)) && @@ -157,6 +152,8 @@ static int in_drive_list(struct hd_driveid *id, const struct drive_list_entry *d return 0; } +EXPORT_SYMBOL_GPL(ide_in_drive_list); + /** * ide_dma_intr - IDE DMA interrupt handler * @drive: the drive the interrupt is for @@ -663,7 +660,7 @@ int __ide_dma_bad_drive (ide_drive_t *drive) { struct hd_driveid *id = drive->id; - int blacklist = in_drive_list(id, drive_blacklist); + int blacklist = ide_in_drive_list(id, drive_blacklist); if (blacklist) { printk(KERN_WARNING "%s: Disabling (U)DMA for %s (blacklisted)\n", drive->name, id->model); @@ -677,7 +674,7 @@ EXPORT_SYMBOL(__ide_dma_bad_drive); int __ide_dma_good_drive (ide_drive_t *drive) { struct hd_driveid *id = drive->id; - return in_drive_list(id, drive_whitelist); + return ide_in_drive_list(id, drive_whitelist); } EXPORT_SYMBOL(__ide_dma_good_drive); diff --git a/include/asm-mips/mach-au1x00/au1xxx_ide.h b/include/asm-mips/mach-au1x00/au1xxx_ide.h index 33d275c3b84c..0c3c127e619e 100644 --- a/include/asm-mips/mach-au1x00/au1xxx_ide.h +++ b/include/asm-mips/mach-au1x00/au1xxx_ide.h @@ -87,11 +87,6 @@ typedef struct } _auide_hwif; #ifdef CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA -struct drive_list_entry { - const char * id_model; - const char * id_firmware; -}; - /* HD white list */ static const struct drive_list_entry dma_white_list [] = { /* diff --git a/include/linux/ide.h b/include/linux/ide.h index a39c3c59789d..a6b28dcf8f0d 100644 --- a/include/linux/ide.h +++ b/include/linux/ide.h @@ -1371,6 +1371,12 @@ void ide_init_sg_cmd(ide_drive_t *, struct request *); #define GOOD_DMA_DRIVE 1 #ifdef CONFIG_BLK_DEV_IDEDMA +struct drive_list_entry { + const char *id_model; + const char *id_firmware; +}; + +int ide_in_drive_list(struct hd_driveid *, const struct drive_list_entry *); int __ide_dma_bad_drive(ide_drive_t *); int __ide_dma_good_drive(ide_drive_t *); int ide_use_dma(ide_drive_t *); -- cgit v1.2.3-59-g8ed1b From 8f29e650bffc1e22ed6b2d0b321bc77627f3bb7a Mon Sep 17 00:00:00 2001 From: Jordan Crouse Date: Thu, 15 Dec 2005 02:17:46 +0100 Subject: [PATCH] ide: AU1200 IDE update Changes here include removing all of CONFIG_PM while it is being repeatedly smacked with a lead pipe, moving the BURSTMODE param to a #define (it should be defined almost always anyway), fixing the rqsize stuff, pulling ide_ioreg_t, and general cleanups and whatnot. Signed-off-by: Jordan Crouse Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/Kconfig | 8 - drivers/ide/mips/Makefile | 3 + drivers/ide/mips/au1xxx-ide.c | 1498 ++++++++++------------------- include/asm-mips/mach-au1x00/au1xxx_ide.h | 17 +- 4 files changed, 543 insertions(+), 983 deletions(-) (limited to 'drivers') diff --git a/drivers/ide/Kconfig b/drivers/ide/Kconfig index 45579ae12c01..1c81174595b3 100644 --- a/drivers/ide/Kconfig +++ b/drivers/ide/Kconfig @@ -807,14 +807,6 @@ config BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA depends on SOC_AU1200 && BLK_DEV_IDE_AU1XXX endchoice -config BLK_DEV_IDE_AU1XXX_BURSTABLE_ON - bool "Enable burstable Mode on DbDMA" - default false - depends BLK_DEV_IDE_AU1XXX - help - This option enable the burstable Flag on DbDMA controller - (cf. "AMD Alchemy 'Au1200' Processor Data Book - PRELIMINARY"). - config BLK_DEV_IDE_AU1XXX_SEQTS_PER_RQ int "Maximum transfer size (KB) per request (up to 128)" default "128" diff --git a/drivers/ide/mips/Makefile b/drivers/ide/mips/Makefile index 578e52a59588..677c7b2bac92 100644 --- a/drivers/ide/mips/Makefile +++ b/drivers/ide/mips/Makefile @@ -1 +1,4 @@ obj-$(CONFIG_BLK_DEV_IDE_SWARM) += swarm.o +obj-$(CONFIG_BLK_DEV_IDE_AU1XXX) += au1xxx-ide.o + +EXTRA_CFLAGS := -Idrivers/ide diff --git a/drivers/ide/mips/au1xxx-ide.c b/drivers/ide/mips/au1xxx-ide.c index 2b6327c576b9..32431dcf5d8e 100644 --- a/drivers/ide/mips/au1xxx-ide.c +++ b/drivers/ide/mips/au1xxx-ide.c @@ -31,865 +31,638 @@ */ #undef REALLY_SLOW_IO /* most systems can safely undef this */ -#include /* for CONFIG_BLK_DEV_IDEPCI */ #include #include #include #include -#include -#include -#include -#include +#include + #include #include #include #include +#include "ide-timing.h" + #include #include #include -#if CONFIG_PM -#include -#endif - #include #define DRV_NAME "au1200-ide" #define DRV_VERSION "1.0" -#define DRV_AUTHOR "AMD PCS / Pete Popov " -#define DRV_DESC "Au1200 IDE" - -static _auide_hwif auide_hwif; -static spinlock_t ide_tune_drive_spin_lock = SPIN_LOCK_UNLOCKED; -static spinlock_t ide_tune_chipset_spin_lock = SPIN_LOCK_UNLOCKED; -static int dbdma_init_done = 0; - -/* - * local I/O functions - */ -u8 auide_inb(unsigned long port) -{ - return (au_readb(port)); -} +#define DRV_AUTHOR "Enrico Walther / Pete Popov " -u16 auide_inw(unsigned long port) -{ - return (au_readw(port)); -} +/* enable the burstmode in the dbdma */ +#define IDE_AU1XXX_BURSTMODE 1 -u32 auide_inl(unsigned long port) -{ - return (au_readl(port)); -} +static _auide_hwif auide_hwif; +static int dbdma_init_done; -void auide_insw(unsigned long port, void *addr, u32 count) -{ #if defined(CONFIG_BLK_DEV_IDE_AU1XXX_PIO_DBDMA) - _auide_hwif *ahwif = &auide_hwif; - chan_tab_t *ctp; - au1x_ddma_desc_t *dp; - - if(!put_dest_flags(ahwif->rx_chan, (void*)addr, count << 1, - DDMA_FLAGS_NOIE)) { - printk(KERN_ERR "%s failed %d\n", __FUNCTION__, __LINE__); - return; - } - ctp = *((chan_tab_t **)ahwif->rx_chan); - dp = ctp->cur_ptr; - while (dp->dscr_cmd0 & DSCR_CMD0_V) - ; - ctp->cur_ptr = au1xxx_ddma_get_nextptr_virt(dp); -#else - while (count--) - { - *(u16 *)addr = au_readw(port); - addr +=2 ; - } -#endif -} - -void auide_insl(unsigned long port, void *addr, u32 count) -{ - while (count--) - { - *(u32 *)addr = au_readl(port); - /* NOTE: For IDE interfaces over PCMCIA, - * 32-bit access does not work - */ - addr += 4; - } -} - -void auide_outb(u8 addr, unsigned long port) +void auide_insw(unsigned long port, void *addr, u32 count) { - return (au_writeb(addr, port)); -} + _auide_hwif *ahwif = &auide_hwif; + chan_tab_t *ctp; + au1x_ddma_desc_t *dp; -void auide_outbsync(ide_drive_t *drive, u8 addr, unsigned long port) -{ - return (au_writeb(addr, port)); + if(!put_dest_flags(ahwif->rx_chan, (void*)addr, count << 1, + DDMA_FLAGS_NOIE)) { + printk(KERN_ERR "%s failed %d\n", __FUNCTION__, __LINE__); + return; + } + ctp = *((chan_tab_t **)ahwif->rx_chan); + dp = ctp->cur_ptr; + while (dp->dscr_cmd0 & DSCR_CMD0_V) + ; + ctp->cur_ptr = au1xxx_ddma_get_nextptr_virt(dp); } -void auide_outw(u16 addr, unsigned long port) +void auide_outsw(unsigned long port, void *addr, u32 count) { - return (au_writew(addr, port)); -} + _auide_hwif *ahwif = &auide_hwif; + chan_tab_t *ctp; + au1x_ddma_desc_t *dp; -void auide_outl(u32 addr, unsigned long port) -{ - return (au_writel(addr, port)); + if(!put_source_flags(ahwif->tx_chan, (void*)addr, + count << 1, DDMA_FLAGS_NOIE)) { + printk(KERN_ERR "%s failed %d\n", __FUNCTION__, __LINE__); + return; + } + ctp = *((chan_tab_t **)ahwif->tx_chan); + dp = ctp->cur_ptr; + while (dp->dscr_cmd0 & DSCR_CMD0_V) + ; + ctp->cur_ptr = au1xxx_ddma_get_nextptr_virt(dp); } -void auide_outsw(unsigned long port, void *addr, u32 count) -{ -#if defined(CONFIG_BLK_DEV_IDE_AU1XXX_PIO_DBDMA) - _auide_hwif *ahwif = &auide_hwif; - chan_tab_t *ctp; - au1x_ddma_desc_t *dp; - - if(!put_source_flags(ahwif->tx_chan, (void*)addr, - count << 1, DDMA_FLAGS_NOIE)) { - printk(KERN_ERR "%s failed %d\n", __FUNCTION__, __LINE__); - return; - } - ctp = *((chan_tab_t **)ahwif->tx_chan); - dp = ctp->cur_ptr; - while (dp->dscr_cmd0 & DSCR_CMD0_V) - ; - ctp->cur_ptr = au1xxx_ddma_get_nextptr_virt(dp); -#else - while (count--) - { - au_writew(*(u16 *)addr, port); - addr += 2; - } #endif -} - -void auide_outsl(unsigned long port, void *addr, u32 count) -{ - while (count--) - { - au_writel(*(u32 *)addr, port); - /* NOTE: For IDE interfaces over PCMCIA, - * 32-bit access does not work - */ - addr += 4; - } -} static void auide_tune_drive(ide_drive_t *drive, byte pio) { - int mem_sttime; - int mem_stcfg; - unsigned long flags; - u8 speed; - - /* get the best pio mode for the drive */ - pio = ide_get_best_pio_mode(drive, pio, 4, NULL); - - printk("%s: setting Au1XXX IDE to PIO mode%d\n", - drive->name, pio); - - spin_lock_irqsave(&ide_tune_drive_spin_lock, flags); - - mem_sttime = 0; - mem_stcfg = au_readl(MEM_STCFG2); - - /* set pio mode! */ - switch(pio) { - case 0: - /* set timing parameters for RCS2# */ - mem_sttime = SBC_IDE_PIO0_TWCS - | SBC_IDE_PIO0_TCSH - | SBC_IDE_PIO0_TCSOFF - | SBC_IDE_PIO0_TWP - | SBC_IDE_PIO0_TCSW - | SBC_IDE_PIO0_TPM - | SBC_IDE_PIO0_TA; - /* set configuration for RCS2# */ - mem_stcfg |= TS_MASK; - mem_stcfg &= ~TCSOE_MASK; - mem_stcfg &= ~TOECS_MASK; - mem_stcfg |= SBC_IDE_PIO0_TCSOE | SBC_IDE_PIO0_TOECS; - - au_writel(mem_sttime,MEM_STTIME2); - au_writel(mem_stcfg,MEM_STCFG2); - break; - - case 1: - /* set timing parameters for RCS2# */ - mem_sttime = SBC_IDE_PIO1_TWCS - | SBC_IDE_PIO1_TCSH - | SBC_IDE_PIO1_TCSOFF - | SBC_IDE_PIO1_TWP - | SBC_IDE_PIO1_TCSW - | SBC_IDE_PIO1_TPM - | SBC_IDE_PIO1_TA; - /* set configuration for RCS2# */ - mem_stcfg |= TS_MASK; - mem_stcfg &= ~TCSOE_MASK; - mem_stcfg &= ~TOECS_MASK; - mem_stcfg |= SBC_IDE_PIO1_TCSOE | SBC_IDE_PIO1_TOECS; - break; - - case 2: - /* set timing parameters for RCS2# */ - mem_sttime = SBC_IDE_PIO2_TWCS - | SBC_IDE_PIO2_TCSH - | SBC_IDE_PIO2_TCSOFF - | SBC_IDE_PIO2_TWP - | SBC_IDE_PIO2_TCSW - | SBC_IDE_PIO2_TPM - | SBC_IDE_PIO2_TA; - /* set configuration for RCS2# */ - mem_stcfg &= ~TS_MASK; - mem_stcfg &= ~TCSOE_MASK; - mem_stcfg &= ~TOECS_MASK; - mem_stcfg |= SBC_IDE_PIO2_TCSOE | SBC_IDE_PIO2_TOECS; - break; - - case 3: - /* set timing parameters for RCS2# */ - mem_sttime = SBC_IDE_PIO3_TWCS - | SBC_IDE_PIO3_TCSH - | SBC_IDE_PIO3_TCSOFF - | SBC_IDE_PIO3_TWP - | SBC_IDE_PIO3_TCSW - | SBC_IDE_PIO3_TPM - | SBC_IDE_PIO3_TA; - /* set configuration for RCS2# */ - mem_stcfg |= TS_MASK; - mem_stcfg &= ~TS_MASK; - mem_stcfg &= ~TCSOE_MASK; - mem_stcfg &= ~TOECS_MASK; - mem_stcfg |= SBC_IDE_PIO3_TCSOE | SBC_IDE_PIO3_TOECS; - - break; - - case 4: - /* set timing parameters for RCS2# */ - mem_sttime = SBC_IDE_PIO4_TWCS - | SBC_IDE_PIO4_TCSH - | SBC_IDE_PIO4_TCSOFF - | SBC_IDE_PIO4_TWP - | SBC_IDE_PIO4_TCSW - | SBC_IDE_PIO4_TPM - | SBC_IDE_PIO4_TA; - /* set configuration for RCS2# */ - mem_stcfg &= ~TS_MASK; - mem_stcfg &= ~TCSOE_MASK; - mem_stcfg &= ~TOECS_MASK; - mem_stcfg |= SBC_IDE_PIO4_TCSOE | SBC_IDE_PIO4_TOECS; - break; - } - - au_writel(mem_sttime,MEM_STTIME2); - au_writel(mem_stcfg,MEM_STCFG2); - - spin_unlock_irqrestore(&ide_tune_drive_spin_lock, flags); - - speed = pio + XFER_PIO_0; - ide_config_drive_speed(drive, speed); + int mem_sttime; + int mem_stcfg; + u8 speed; + + /* get the best pio mode for the drive */ + pio = ide_get_best_pio_mode(drive, pio, 4, NULL); + + printk(KERN_INFO "%s: setting Au1XXX IDE to PIO mode%d\n", + drive->name, pio); + + mem_sttime = 0; + mem_stcfg = au_readl(MEM_STCFG2); + + /* set pio mode! */ + switch(pio) { + case 0: + mem_sttime = SBC_IDE_TIMING(PIO0); + + /* set configuration for RCS2# */ + mem_stcfg |= TS_MASK; + mem_stcfg &= ~TCSOE_MASK; + mem_stcfg &= ~TOECS_MASK; + mem_stcfg |= SBC_IDE_PIO0_TCSOE | SBC_IDE_PIO0_TOECS; + break; + + case 1: + mem_sttime = SBC_IDE_TIMING(PIO1); + + /* set configuration for RCS2# */ + mem_stcfg |= TS_MASK; + mem_stcfg &= ~TCSOE_MASK; + mem_stcfg &= ~TOECS_MASK; + mem_stcfg |= SBC_IDE_PIO1_TCSOE | SBC_IDE_PIO1_TOECS; + break; + + case 2: + mem_sttime = SBC_IDE_TIMING(PIO2); + + /* set configuration for RCS2# */ + mem_stcfg &= ~TS_MASK; + mem_stcfg &= ~TCSOE_MASK; + mem_stcfg &= ~TOECS_MASK; + mem_stcfg |= SBC_IDE_PIO2_TCSOE | SBC_IDE_PIO2_TOECS; + break; + + case 3: + mem_sttime = SBC_IDE_TIMING(PIO3); + + /* set configuration for RCS2# */ + mem_stcfg &= ~TS_MASK; + mem_stcfg &= ~TCSOE_MASK; + mem_stcfg &= ~TOECS_MASK; + mem_stcfg |= SBC_IDE_PIO3_TCSOE | SBC_IDE_PIO3_TOECS; + + break; + + case 4: + mem_sttime = SBC_IDE_TIMING(PIO4); + + /* set configuration for RCS2# */ + mem_stcfg &= ~TS_MASK; + mem_stcfg &= ~TCSOE_MASK; + mem_stcfg &= ~TOECS_MASK; + mem_stcfg |= SBC_IDE_PIO4_TCSOE | SBC_IDE_PIO4_TOECS; + break; + } + + au_writel(mem_sttime,MEM_STTIME2); + au_writel(mem_stcfg,MEM_STCFG2); + + speed = pio + XFER_PIO_0; + ide_config_drive_speed(drive, speed); } static int auide_tune_chipset (ide_drive_t *drive, u8 speed) { - u8 mode = 0; - int mem_sttime; - int mem_stcfg; - unsigned long flags; + int mem_sttime; + int mem_stcfg; + unsigned long mode; + #ifdef CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA - struct hd_driveid *id = drive->id; - - /* - * Now see what the current drive is capable of, - * selecting UDMA only if the mate said it was ok. - */ - if (id && (id->capability & 1) && drive->autodma && - !__ide_dma_bad_drive(drive)) { - if (!mode && (id->field_valid & 2) && (id->dma_mword & 7)) { - if (id->dma_mword & 4) - mode = XFER_MW_DMA_2; - else if (id->dma_mword & 2) - mode = XFER_MW_DMA_1; - else if (id->dma_mword & 1) - mode = XFER_MW_DMA_0; - } - } + if (ide_use_dma(drive)) + mode = ide_dma_speed(drive, 0); #endif - spin_lock_irqsave(&ide_tune_chipset_spin_lock, flags); + mem_sttime = 0; + mem_stcfg = au_readl(MEM_STCFG2); - mem_sttime = 0; - mem_stcfg = au_readl(MEM_STCFG2); - - switch(speed) { - case XFER_PIO_4: - case XFER_PIO_3: - case XFER_PIO_2: - case XFER_PIO_1: - case XFER_PIO_0: - auide_tune_drive(drive, (speed - XFER_PIO_0)); - break; + if (speed >= XFER_PIO_0 && speed <= XFER_PIO_4) { + auide_tune_drive(drive, speed - XFER_PIO_0); + return 0; + } + + switch(speed) { #ifdef CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA - case XFER_MW_DMA_2: - /* set timing parameters for RCS2# */ - mem_sttime = SBC_IDE_MDMA2_TWCS - | SBC_IDE_MDMA2_TCSH - | SBC_IDE_MDMA2_TCSOFF - | SBC_IDE_MDMA2_TWP - | SBC_IDE_MDMA2_TCSW - | SBC_IDE_MDMA2_TPM - | SBC_IDE_MDMA2_TA; - /* set configuration for RCS2# */ - mem_stcfg &= ~TS_MASK; - mem_stcfg &= ~TCSOE_MASK; - mem_stcfg &= ~TOECS_MASK; - mem_stcfg |= SBC_IDE_MDMA2_TCSOE | SBC_IDE_MDMA2_TOECS; - - mode = XFER_MW_DMA_2; - break; - case XFER_MW_DMA_1: - /* set timing parameters for RCS2# */ - mem_sttime = SBC_IDE_MDMA1_TWCS - | SBC_IDE_MDMA1_TCSH - | SBC_IDE_MDMA1_TCSOFF - | SBC_IDE_MDMA1_TWP - | SBC_IDE_MDMA1_TCSW - | SBC_IDE_MDMA1_TPM - | SBC_IDE_MDMA1_TA; - /* set configuration for RCS2# */ - mem_stcfg &= ~TS_MASK; - mem_stcfg &= ~TCSOE_MASK; - mem_stcfg &= ~TOECS_MASK; - mem_stcfg |= SBC_IDE_MDMA1_TCSOE | SBC_IDE_MDMA1_TOECS; - - mode = XFER_MW_DMA_1; - break; - case XFER_MW_DMA_0: - /* set timing parameters for RCS2# */ - mem_sttime = SBC_IDE_MDMA0_TWCS - | SBC_IDE_MDMA0_TCSH - | SBC_IDE_MDMA0_TCSOFF - | SBC_IDE_MDMA0_TWP - | SBC_IDE_MDMA0_TCSW - | SBC_IDE_MDMA0_TPM - | SBC_IDE_MDMA0_TA; - /* set configuration for RCS2# */ - mem_stcfg |= TS_MASK; - mem_stcfg &= ~TCSOE_MASK; - mem_stcfg &= ~TOECS_MASK; - mem_stcfg |= SBC_IDE_MDMA0_TCSOE | SBC_IDE_MDMA0_TOECS; - - mode = XFER_MW_DMA_0; - break; + case XFER_MW_DMA_2: + mem_sttime = SBC_IDE_TIMING(MDMA2); + + /* set configuration for RCS2# */ + mem_stcfg &= ~TS_MASK; + mem_stcfg &= ~TCSOE_MASK; + mem_stcfg &= ~TOECS_MASK; + mem_stcfg |= SBC_IDE_MDMA2_TCSOE | SBC_IDE_MDMA2_TOECS; + + mode = XFER_MW_DMA_2; + break; + case XFER_MW_DMA_1: + mem_sttime = SBC_IDE_TIMING(MDMA1); + + /* set configuration for RCS2# */ + mem_stcfg &= ~TS_MASK; + mem_stcfg &= ~TCSOE_MASK; + mem_stcfg &= ~TOECS_MASK; + mem_stcfg |= SBC_IDE_MDMA1_TCSOE | SBC_IDE_MDMA1_TOECS; + + mode = XFER_MW_DMA_1; + break; + case XFER_MW_DMA_0: + mem_sttime = SBC_IDE_TIMING(MDMA0); + + /* set configuration for RCS2# */ + mem_stcfg |= TS_MASK; + mem_stcfg &= ~TCSOE_MASK; + mem_stcfg &= ~TOECS_MASK; + mem_stcfg |= SBC_IDE_MDMA0_TCSOE | SBC_IDE_MDMA0_TOECS; + + mode = XFER_MW_DMA_0; + break; #endif - default: - return 1; - } - - /* - * Tell the drive to switch to the new mode; abort on failure. - */ - if (!mode || ide_config_drive_speed(drive, mode)) - { - return 1; /* failure */ - } - - - au_writel(mem_sttime,MEM_STTIME2); - au_writel(mem_stcfg,MEM_STCFG2); + default: + return 1; + } + + if (ide_config_drive_speed(drive, mode)) + return 1; - spin_unlock_irqrestore(&ide_tune_chipset_spin_lock, flags); + au_writel(mem_sttime,MEM_STTIME2); + au_writel(mem_stcfg,MEM_STCFG2); - return 0; + return 0; } /* * Multi-Word DMA + DbDMA functions */ -#ifdef CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA -static int in_drive_list(struct hd_driveid *id, - const struct drive_list_entry *drive_table) -{ - for ( ; drive_table->id_model ; drive_table++){ - if ((!strcmp(drive_table->id_model, id->model)) && - ((strstr(drive_table->id_firmware, id->fw_rev)) || - (!strcmp(drive_table->id_firmware, "ALL"))) - ) - return 1; - } - return 0; -} +#ifdef CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA static int auide_build_sglist(ide_drive_t *drive, struct request *rq) { - ide_hwif_t *hwif = drive->hwif; - _auide_hwif *ahwif = (_auide_hwif*)hwif->hwif_data; - struct scatterlist *sg = hwif->sg_table; + ide_hwif_t *hwif = drive->hwif; + _auide_hwif *ahwif = (_auide_hwif*)hwif->hwif_data; + struct scatterlist *sg = hwif->sg_table; - ide_map_sg(drive, rq); + ide_map_sg(drive, rq); - if (rq_data_dir(rq) == READ) - hwif->sg_dma_direction = DMA_FROM_DEVICE; - else - hwif->sg_dma_direction = DMA_TO_DEVICE; + if (rq_data_dir(rq) == READ) + hwif->sg_dma_direction = DMA_FROM_DEVICE; + else + hwif->sg_dma_direction = DMA_TO_DEVICE; - return dma_map_sg(ahwif->dev, sg, hwif->sg_nents, - hwif->sg_dma_direction); + return dma_map_sg(ahwif->dev, sg, hwif->sg_nents, + hwif->sg_dma_direction); } static int auide_build_dmatable(ide_drive_t *drive) { - int i, iswrite, count = 0; - ide_hwif_t *hwif = HWIF(drive); - - struct request *rq = HWGROUP(drive)->rq; - - _auide_hwif *ahwif = (_auide_hwif*)hwif->hwif_data; - struct scatterlist *sg; - - iswrite = (rq_data_dir(rq) == WRITE); - /* Save for interrupt context */ - ahwif->drive = drive; - - /* Build sglist */ - hwif->sg_nents = i = auide_build_sglist(drive, rq); - - if (!i) - return 0; - - /* fill the descriptors */ - sg = hwif->sg_table; - while (i && sg_dma_len(sg)) { - u32 cur_addr; - u32 cur_len; - - cur_addr = sg_dma_address(sg); - cur_len = sg_dma_len(sg); - - while (cur_len) { - u32 flags = DDMA_FLAGS_NOIE; - unsigned int tc = (cur_len < 0xfe00)? cur_len: 0xfe00; - - if (++count >= PRD_ENTRIES) { - printk(KERN_WARNING "%s: DMA table too small\n", - drive->name); - goto use_pio_instead; - } - - /* Lets enable intr for the last descriptor only */ - if (1==i) - flags = DDMA_FLAGS_IE; - else - flags = DDMA_FLAGS_NOIE; - - if (iswrite) { - if(!put_source_flags(ahwif->tx_chan, - (void*)(page_address(sg->page) - + sg->offset), - tc, flags)) { - printk(KERN_ERR "%s failed %d\n", - __FUNCTION__, __LINE__); + int i, iswrite, count = 0; + ide_hwif_t *hwif = HWIF(drive); + + struct request *rq = HWGROUP(drive)->rq; + + _auide_hwif *ahwif = (_auide_hwif*)hwif->hwif_data; + struct scatterlist *sg; + + iswrite = (rq_data_dir(rq) == WRITE); + /* Save for interrupt context */ + ahwif->drive = drive; + + /* Build sglist */ + hwif->sg_nents = i = auide_build_sglist(drive, rq); + + if (!i) + return 0; + + /* fill the descriptors */ + sg = hwif->sg_table; + while (i && sg_dma_len(sg)) { + u32 cur_addr; + u32 cur_len; + + cur_addr = sg_dma_address(sg); + cur_len = sg_dma_len(sg); + + while (cur_len) { + u32 flags = DDMA_FLAGS_NOIE; + unsigned int tc = (cur_len < 0xfe00)? cur_len: 0xfe00; + + if (++count >= PRD_ENTRIES) { + printk(KERN_WARNING "%s: DMA table too small\n", + drive->name); + goto use_pio_instead; + } + + /* Lets enable intr for the last descriptor only */ + if (1==i) + flags = DDMA_FLAGS_IE; + else + flags = DDMA_FLAGS_NOIE; + + if (iswrite) { + if(!put_source_flags(ahwif->tx_chan, + (void*)(page_address(sg->page) + + sg->offset), + tc, flags)) { + printk(KERN_ERR "%s failed %d\n", + __FUNCTION__, __LINE__); } - } else + } else { - if(!put_dest_flags(ahwif->rx_chan, - (void*)(page_address(sg->page) - + sg->offset), - tc, flags)) { - printk(KERN_ERR "%s failed %d\n", - __FUNCTION__, __LINE__); + if(!put_dest_flags(ahwif->rx_chan, + (void*)(page_address(sg->page) + + sg->offset), + tc, flags)) { + printk(KERN_ERR "%s failed %d\n", + __FUNCTION__, __LINE__); } - } + } - cur_addr += tc; - cur_len -= tc; - } - sg++; - i--; - } + cur_addr += tc; + cur_len -= tc; + } + sg++; + i--; + } - if (count) - return 1; + if (count) + return 1; -use_pio_instead: - dma_unmap_sg(ahwif->dev, - hwif->sg_table, - hwif->sg_nents, - hwif->sg_dma_direction); + use_pio_instead: + dma_unmap_sg(ahwif->dev, + hwif->sg_table, + hwif->sg_nents, + hwif->sg_dma_direction); - return 0; /* revert to PIO for this request */ + return 0; /* revert to PIO for this request */ } static int auide_dma_end(ide_drive_t *drive) { - ide_hwif_t *hwif = HWIF(drive); - _auide_hwif *ahwif = (_auide_hwif*)hwif->hwif_data; + ide_hwif_t *hwif = HWIF(drive); + _auide_hwif *ahwif = (_auide_hwif*)hwif->hwif_data; - if (hwif->sg_nents) { - dma_unmap_sg(ahwif->dev, hwif->sg_table, hwif->sg_nents, - hwif->sg_dma_direction); - hwif->sg_nents = 0; - } + if (hwif->sg_nents) { + dma_unmap_sg(ahwif->dev, hwif->sg_table, hwif->sg_nents, + hwif->sg_dma_direction); + hwif->sg_nents = 0; + } - return 0; + return 0; } static void auide_dma_start(ide_drive_t *drive ) { -// printk("%s\n", __FUNCTION__); } -ide_startstop_t auide_dma_intr(ide_drive_t *drive) -{ - //printk("%s\n", __FUNCTION__); - - u8 stat = 0, dma_stat = 0; - - dma_stat = HWIF(drive)->ide_dma_end(drive); - stat = HWIF(drive)->INB(IDE_STATUS_REG); /* get drive status */ - if (OK_STAT(stat,DRIVE_READY,drive->bad_wstat|DRQ_STAT)) { - if (!dma_stat) { - struct request *rq = HWGROUP(drive)->rq; - - ide_end_request(drive, 1, rq->nr_sectors); - return ide_stopped; - } - printk(KERN_ERR "%s: dma_intr: bad DMA status (dma_stat=%x)\n", - drive->name, dma_stat); - } - return ide_error(drive, "dma_intr", stat); -} static void auide_dma_exec_cmd(ide_drive_t *drive, u8 command) { - //printk("%s\n", __FUNCTION__); - - /* issue cmd to drive */ - ide_execute_command(drive, command, &auide_dma_intr, - (2*WAIT_CMD), NULL); + /* issue cmd to drive */ + ide_execute_command(drive, command, &ide_dma_intr, + (2*WAIT_CMD), NULL); } static int auide_dma_setup(ide_drive_t *drive) -{ -// printk("%s\n", __FUNCTION__); - - if (drive->media != ide_disk) - return 1; - - if (!auide_build_dmatable(drive)) - /* try PIO instead of DMA */ - return 1; +{ + struct request *rq = HWGROUP(drive)->rq; - drive->waiting_for_dma = 1; + if (!auide_build_dmatable(drive)) { + ide_map_sg(drive, rq); + return 1; + } - return 0; + drive->waiting_for_dma = 1; + return 0; } static int auide_dma_check(ide_drive_t *drive) { -// printk("%s\n", __FUNCTION__); + u8 speed; #ifdef CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA - if( !dbdma_init_done ){ - auide_hwif.white_list = in_drive_list(drive->id, - dma_white_list); - auide_hwif.black_list = in_drive_list(drive->id, - dma_black_list); - auide_hwif.drive = drive; - auide_ddma_init(&auide_hwif); - dbdma_init_done = 1; - } + + if( dbdma_init_done == 0 ){ + auide_hwif.white_list = ide_in_drive_list(drive->id, + dma_white_list); + auide_hwif.black_list = ide_in_drive_list(drive->id, + dma_black_list); + auide_hwif.drive = drive; + auide_ddma_init(&auide_hwif); + dbdma_init_done = 1; + } #endif - /* Is the drive in our DMA black list? */ - if ( auide_hwif.black_list ) { - drive->using_dma = 0; - printk("%s found in dma_blacklist[]! Disabling DMA.\n", - drive->id->model); - } - else - drive->using_dma = 1; + /* Is the drive in our DMA black list? */ + + if ( auide_hwif.black_list ) { + drive->using_dma = 0; + + /* Borrowed the warning message from ide-dma.c */ - return HWIF(drive)->ide_dma_host_on(drive); + printk(KERN_WARNING "%s: Disabling DMA for %s (blacklisted)\n", + drive->name, drive->id->model); + } + else + drive->using_dma = 1; + + speed = ide_find_best_mode(drive, XFER_PIO | XFER_MWDMA); + + if (drive->autodma && (speed & XFER_MODE) != XFER_PIO) + return HWIF(drive)->ide_dma_on(drive); + + return HWIF(drive)->ide_dma_off_quietly(drive); } static int auide_dma_test_irq(ide_drive_t *drive) -{ -// printk("%s\n", __FUNCTION__); - - if (!drive->waiting_for_dma) - printk(KERN_WARNING "%s: ide_dma_test_irq \ +{ + if (drive->waiting_for_dma == 0) + printk(KERN_WARNING "%s: ide_dma_test_irq \ called while not waiting\n", drive->name); - /* If dbdma didn't execute the STOP command yet, the - * active bit is still set + /* If dbdma didn't execute the STOP command yet, the + * active bit is still set */ - drive->waiting_for_dma++; - if (drive->waiting_for_dma >= DMA_WAIT_TIMEOUT) { - printk(KERN_WARNING "%s: timeout waiting for ddma to \ + drive->waiting_for_dma++; + if (drive->waiting_for_dma >= DMA_WAIT_TIMEOUT) { + printk(KERN_WARNING "%s: timeout waiting for ddma to \ complete\n", drive->name); - return 1; - } - udelay(10); - return 0; + return 1; + } + udelay(10); + return 0; } static int auide_dma_host_on(ide_drive_t *drive) { -// printk("%s\n", __FUNCTION__); - return 0; + return 0; } static int auide_dma_on(ide_drive_t *drive) { -// printk("%s\n", __FUNCTION__); - drive->using_dma = 1; - return auide_dma_host_on(drive); + drive->using_dma = 1; + return auide_dma_host_on(drive); } static int auide_dma_host_off(ide_drive_t *drive) { -// printk("%s\n", __FUNCTION__); - return 0; + return 0; } static int auide_dma_off_quietly(ide_drive_t *drive) { -// printk("%s\n", __FUNCTION__); - drive->using_dma = 0; - return auide_dma_host_off(drive); + drive->using_dma = 0; + return auide_dma_host_off(drive); } static int auide_dma_lostirq(ide_drive_t *drive) { -// printk("%s\n", __FUNCTION__); - - printk(KERN_ERR "%s: IRQ lost\n", drive->name); - return 0; + printk(KERN_ERR "%s: IRQ lost\n", drive->name); + return 0; } static void auide_ddma_tx_callback(int irq, void *param, struct pt_regs *regs) { -// printk("%s\n", __FUNCTION__); - - _auide_hwif *ahwif = (_auide_hwif*)param; - ahwif->drive->waiting_for_dma = 0; - return; + _auide_hwif *ahwif = (_auide_hwif*)param; + ahwif->drive->waiting_for_dma = 0; } static void auide_ddma_rx_callback(int irq, void *param, struct pt_regs *regs) { -// printk("%s\n", __FUNCTION__); + _auide_hwif *ahwif = (_auide_hwif*)param; + ahwif->drive->waiting_for_dma = 0; +} + +#endif /* end CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA */ - _auide_hwif *ahwif = (_auide_hwif*)param; - ahwif->drive->waiting_for_dma = 0; - return; +static void auide_init_dbdma_dev(dbdev_tab_t *dev, u32 dev_id, u32 tsize, u32 devwidth, u32 flags) +{ + dev->dev_id = dev_id; + dev->dev_physaddr = (u32)AU1XXX_ATA_PHYS_ADDR; + dev->dev_intlevel = 0; + dev->dev_intpolarity = 0; + dev->dev_tsize = tsize; + dev->dev_devwidth = devwidth; + dev->dev_flags = flags; } + +#if defined(CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA) static int auide_dma_timeout(ide_drive_t *drive) { // printk("%s\n", __FUNCTION__); - printk(KERN_ERR "%s: DMA timeout occurred: ", drive->name); + printk(KERN_ERR "%s: DMA timeout occurred: ", drive->name); - if (HWIF(drive)->ide_dma_test_irq(drive)) - return 0; + if (HWIF(drive)->ide_dma_test_irq(drive)) + return 0; - return HWIF(drive)->ide_dma_end(drive); + return HWIF(drive)->ide_dma_end(drive); } -#endif /* end CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA */ + +static int auide_ddma_init(_auide_hwif *auide) { + + dbdev_tab_t source_dev_tab, target_dev_tab; + u32 dev_id, tsize, devwidth, flags; + ide_hwif_t *hwif = auide->hwif; -static int auide_ddma_init( _auide_hwif *auide ) -{ -// printk("%s\n", __FUNCTION__); + dev_id = AU1XXX_ATA_DDMA_REQ; - dbdev_tab_t source_dev_tab; -#if defined(CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA) - dbdev_tab_t target_dev_tab; - ide_hwif_t *hwif = auide->hwif; - char warning_output [2][80]; - int i; -#endif + if (auide->white_list || auide->black_list) { + tsize = 8; + devwidth = 32; + } + else { + tsize = 1; + devwidth = 16; + + printk(KERN_ERR "au1xxx-ide: %s is not on ide driver whitelist.\n",auide_hwif.drive->id->model); + printk(KERN_ERR " please read 'Documentation/mips/AU1xxx_IDE.README'"); + } - /* Add our custom device to DDMA device table */ - /* Create our new device entries in the table */ -#if defined(CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA) - source_dev_tab.dev_id = AU1XXX_ATA_DDMA_REQ; - - if( auide->white_list || auide->black_list ){ - source_dev_tab.dev_tsize = 8; - source_dev_tab.dev_devwidth = 32; - source_dev_tab.dev_physaddr = (u32)AU1XXX_ATA_PHYS_ADDR; - source_dev_tab.dev_intlevel = 0; - source_dev_tab.dev_intpolarity = 0; - - /* init device table for target - static bus controller - */ - target_dev_tab.dev_id = DSCR_CMD0_ALWAYS; - target_dev_tab.dev_tsize = 8; - target_dev_tab.dev_devwidth = 32; - target_dev_tab.dev_physaddr = (u32)AU1XXX_ATA_PHYS_ADDR; - target_dev_tab.dev_intlevel = 0; - target_dev_tab.dev_intpolarity = 0; - target_dev_tab.dev_flags = DEV_FLAGS_ANYUSE; - } - else{ - source_dev_tab.dev_tsize = 1; - source_dev_tab.dev_devwidth = 16; - source_dev_tab.dev_physaddr = (u32)AU1XXX_ATA_PHYS_ADDR; - source_dev_tab.dev_intlevel = 0; - source_dev_tab.dev_intpolarity = 0; - - /* init device table for target - static bus controller - */ - target_dev_tab.dev_id = DSCR_CMD0_ALWAYS; - target_dev_tab.dev_tsize = 1; - target_dev_tab.dev_devwidth = 16; - target_dev_tab.dev_physaddr = (u32)AU1XXX_ATA_PHYS_ADDR; - target_dev_tab.dev_intlevel = 0; - target_dev_tab.dev_intpolarity = 0; - target_dev_tab.dev_flags = DEV_FLAGS_ANYUSE; - - sprintf(&warning_output[0][0], - "%s is not on ide driver white list.", - auide_hwif.drive->id->model); - for ( i=strlen(&warning_output[0][0]) ; i<76; i++ ){ - sprintf(&warning_output[0][i]," "); - } - - sprintf(&warning_output[1][0], - "To add %s please read 'Documentation/mips/AU1xxx_IDE.README'.", - auide_hwif.drive->id->model); - for ( i=strlen(&warning_output[1][0]) ; i<76; i++ ){ - sprintf(&warning_output[1][i]," "); - } - - printk("\n****************************************"); - printk("****************************************\n"); - printk("* %s *\n",&warning_output[0][0]); - printk("* Switch to safe MWDMA Mode! "); - printk(" *\n"); - printk("* %s *\n",&warning_output[1][0]); - printk("****************************************"); - printk("****************************************\n\n"); - } +#ifdef IDE_AU1XXX_BURSTMODE + flags = DEV_FLAGS_SYNC | DEV_FLAGS_BURSTABLE; #else - source_dev_tab.dev_id = DSCR_CMD0_ALWAYS; - source_dev_tab.dev_tsize = 8; - source_dev_tab.dev_devwidth = 32; - source_dev_tab.dev_physaddr = (u32)AU1XXX_ATA_PHYS_ADDR; - source_dev_tab.dev_intlevel = 0; - source_dev_tab.dev_intpolarity = 0; + flags = DEV_FLAGS_SYNC; #endif -#if CONFIG_BLK_DEV_IDE_AU1XXX_BURSTABLE_ON - /* set flags for tx channel */ - source_dev_tab.dev_flags = DEV_FLAGS_OUT - | DEV_FLAGS_SYNC - | DEV_FLAGS_BURSTABLE; - auide->tx_dev_id = au1xxx_ddma_add_device( &source_dev_tab ); - /* set flags for rx channel */ - source_dev_tab.dev_flags = DEV_FLAGS_IN - | DEV_FLAGS_SYNC - | DEV_FLAGS_BURSTABLE; - auide->rx_dev_id = au1xxx_ddma_add_device( &source_dev_tab ); + /* setup dev_tab for tx channel */ + auide_init_dbdma_dev( &source_dev_tab, + dev_id, + tsize, devwidth, DEV_FLAGS_OUT | flags); + auide->tx_dev_id = au1xxx_ddma_add_device( &source_dev_tab ); + + auide_init_dbdma_dev( &source_dev_tab, + dev_id, + tsize, devwidth, DEV_FLAGS_IN | flags); + auide->rx_dev_id = au1xxx_ddma_add_device( &source_dev_tab ); + + /* We also need to add a target device for the DMA */ + auide_init_dbdma_dev( &target_dev_tab, + (u32)DSCR_CMD0_ALWAYS, + tsize, devwidth, DEV_FLAGS_ANYUSE); + auide->target_dev_id = au1xxx_ddma_add_device(&target_dev_tab); + + /* Get a channel for TX */ + auide->tx_chan = au1xxx_dbdma_chan_alloc(auide->target_dev_id, + auide->tx_dev_id, + auide_ddma_tx_callback, + (void*)auide); + + /* Get a channel for RX */ + auide->rx_chan = au1xxx_dbdma_chan_alloc(auide->rx_dev_id, + auide->target_dev_id, + auide_ddma_rx_callback, + (void*)auide); + + auide->tx_desc_head = (void*)au1xxx_dbdma_ring_alloc(auide->tx_chan, + NUM_DESCRIPTORS); + auide->rx_desc_head = (void*)au1xxx_dbdma_ring_alloc(auide->rx_chan, + NUM_DESCRIPTORS); + + hwif->dmatable_cpu = dma_alloc_coherent(auide->dev, + PRD_ENTRIES * PRD_BYTES, /* 1 Page */ + &hwif->dmatable_dma, GFP_KERNEL); + + au1xxx_dbdma_start( auide->tx_chan ); + au1xxx_dbdma_start( auide->rx_chan ); + + return 0; +} #else - /* set flags for tx channel */ - source_dev_tab.dev_flags = DEV_FLAGS_OUT | DEV_FLAGS_SYNC; - auide->tx_dev_id = au1xxx_ddma_add_device( &source_dev_tab ); - /* set flags for rx channel */ - source_dev_tab.dev_flags = DEV_FLAGS_IN | DEV_FLAGS_SYNC; - auide->rx_dev_id = au1xxx_ddma_add_device( &source_dev_tab ); -#endif + +static int auide_ddma_init( _auide_hwif *auide ) +{ + dbdev_tab_t source_dev_tab; + int flags; -#if defined(CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA) - - auide->target_dev_id = au1xxx_ddma_add_device(&target_dev_tab); - - /* Get a channel for TX */ - auide->tx_chan = au1xxx_dbdma_chan_alloc(auide->target_dev_id, - auide->tx_dev_id, - auide_ddma_tx_callback, - (void*)auide); - /* Get a channel for RX */ - auide->rx_chan = au1xxx_dbdma_chan_alloc(auide->rx_dev_id, - auide->target_dev_id, - auide_ddma_rx_callback, - (void*)auide); -#else /* CONFIG_BLK_DEV_IDE_AU1XXX_PIO_DBDMA */ - /* - * Note: if call back is not enabled, update ctp->cur_ptr manually - */ - auide->tx_chan = au1xxx_dbdma_chan_alloc(DSCR_CMD0_ALWAYS, - auide->tx_dev_id, - NULL, - (void*)auide); - auide->rx_chan = au1xxx_dbdma_chan_alloc(auide->rx_dev_id, - DSCR_CMD0_ALWAYS, - NULL, - (void*)auide); +#ifdef IDE_AU1XXX_BURSTMODE + flags = DEV_FLAGS_SYNC | DEV_FLAGS_BURSTABLE; +#else + flags = DEV_FLAGS_SYNC; #endif - auide->tx_desc_head = (void*)au1xxx_dbdma_ring_alloc(auide->tx_chan, - NUM_DESCRIPTORS); - auide->rx_desc_head = (void*)au1xxx_dbdma_ring_alloc(auide->rx_chan, - NUM_DESCRIPTORS); -#if defined(CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA) - hwif->dmatable_cpu = dma_alloc_coherent(auide->dev, - PRD_ENTRIES * PRD_BYTES, /* 1 Page */ - &hwif->dmatable_dma, GFP_KERNEL); - - auide->sg_table = kmalloc(sizeof(struct scatterlist) * PRD_ENTRIES, - GFP_KERNEL|GFP_DMA); - if (auide->sg_table == NULL) { - return -ENOMEM; - } -#endif - au1xxx_dbdma_start( auide->tx_chan ); - au1xxx_dbdma_start( auide->rx_chan ); - return 0; + /* setup dev_tab for tx channel */ + auide_init_dbdma_dev( &source_dev_tab, + (u32)DSCR_CMD0_ALWAYS, + 8, 32, DEV_FLAGS_OUT | flags); + auide->tx_dev_id = au1xxx_ddma_add_device( &source_dev_tab ); + + auide_init_dbdma_dev( &source_dev_tab, + (u32)DSCR_CMD0_ALWAYS, + 8, 32, DEV_FLAGS_IN | flags); + auide->rx_dev_id = au1xxx_ddma_add_device( &source_dev_tab ); + + /* Get a channel for TX */ + auide->tx_chan = au1xxx_dbdma_chan_alloc(DSCR_CMD0_ALWAYS, + auide->tx_dev_id, + NULL, + (void*)auide); + + /* Get a channel for RX */ + auide->rx_chan = au1xxx_dbdma_chan_alloc(auide->rx_dev_id, + DSCR_CMD0_ALWAYS, + NULL, + (void*)auide); + + auide->tx_desc_head = (void*)au1xxx_dbdma_ring_alloc(auide->tx_chan, + NUM_DESCRIPTORS); + auide->rx_desc_head = (void*)au1xxx_dbdma_ring_alloc(auide->rx_chan, + NUM_DESCRIPTORS); + + au1xxx_dbdma_start( auide->tx_chan ); + au1xxx_dbdma_start( auide->rx_chan ); + + return 0; } +#endif static void auide_setup_ports(hw_regs_t *hw, _auide_hwif *ahwif) { - int i; -#define ide_ioreg_t unsigned long - ide_ioreg_t *ata_regs = hw->io_ports; - - /* fixme */ - for (i = 0; i < IDE_CONTROL_OFFSET; i++) { - *ata_regs++ = (ide_ioreg_t) ahwif->regbase - + (ide_ioreg_t)(i << AU1XXX_ATA_REG_OFFSET); - } - - /* set the Alternative Status register */ - *ata_regs = (ide_ioreg_t) ahwif->regbase - + (ide_ioreg_t)(14 << AU1XXX_ATA_REG_OFFSET); + int i; + unsigned long *ata_regs = hw->io_ports; + + /* FIXME? */ + for (i = 0; i < IDE_CONTROL_OFFSET; i++) { + *ata_regs++ = ahwif->regbase + (i << AU1XXX_ATA_REG_OFFSET); + } + + /* set the Alternative Status register */ + *ata_regs = ahwif->regbase + (14 << AU1XXX_ATA_REG_OFFSET); } static int au_ide_probe(struct device *dev) { struct platform_device *pdev = to_platform_device(dev); - _auide_hwif *ahwif = &auide_hwif; - ide_hwif_t *hwif; + _auide_hwif *ahwif = &auide_hwif; + ide_hwif_t *hwif; struct resource *res; int ret = 0; #if defined(CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA) - char *mode = "MWDMA2"; + char *mode = "MWDMA2"; #elif defined(CONFIG_BLK_DEV_IDE_AU1XXX_PIO_DBDMA) - char *mode = "PIO+DDMA(offload)"; + char *mode = "PIO+DDMA(offload)"; #endif - memset(&auide_hwif, 0, sizeof(_auide_hwif)); - auide_hwif.dev = 0; + memset(&auide_hwif, 0, sizeof(_auide_hwif)); + auide_hwif.dev = 0; ahwif->dev = dev; ahwif->irq = platform_get_irq(pdev, 0); @@ -902,11 +675,11 @@ static int au_ide_probe(struct device *dev) goto out; } - if (!request_mem_region (res->start, res->end-res->start, pdev->name)) { + if (!request_mem_region (res->start, res->end-res->start, pdev->name)) { pr_debug("%s: request_mem_region failed\n", DRV_NAME); - ret = -EBUSY; + ret = -EBUSY; goto out; - } + } ahwif->regbase = (u32)ioremap(res->start, res->end-res->start); if (ahwif->regbase == 0) { @@ -914,130 +687,92 @@ static int au_ide_probe(struct device *dev) goto out; } - hwif = &ide_hwifs[pdev->id]; + /* FIXME: This might possibly break PCMCIA IDE devices */ + + hwif = &ide_hwifs[pdev->id]; hw_regs_t *hw = &hwif->hw; - hwif->irq = hw->irq = ahwif->irq; - hwif->chipset = ide_au1xxx; + hwif->irq = hw->irq = ahwif->irq; + hwif->chipset = ide_au1xxx; - auide_setup_ports(hw, ahwif); + auide_setup_ports(hw, ahwif); memcpy(hwif->io_ports, hw->io_ports, sizeof(hwif->io_ports)); -#ifdef CONFIG_BLK_DEV_IDE_AU1XXX_SEQTS_PER_RQ - hwif->rqsize = CONFIG_BLK_DEV_IDE_AU1XXX_SEQTS_PER_RQ; - hwif->rqsize = ((hwif->rqsize > AU1XXX_ATA_RQSIZE) - || (hwif->rqsize < 32)) ? AU1XXX_ATA_RQSIZE : hwif->rqsize; -#else /* if kernel config is not set */ - hwif->rqsize = AU1XXX_ATA_RQSIZE; -#endif - - hwif->ultra_mask = 0x0; /* Disable Ultra DMA */ + hwif->ultra_mask = 0x0; /* Disable Ultra DMA */ #ifdef CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA - hwif->mwdma_mask = 0x07; /* Multimode-2 DMA */ - hwif->swdma_mask = 0x07; + hwif->mwdma_mask = 0x07; /* Multimode-2 DMA */ + hwif->swdma_mask = 0x00; #else - hwif->mwdma_mask = 0x0; - hwif->swdma_mask = 0x0; + hwif->mwdma_mask = 0x0; + hwif->swdma_mask = 0x0; +#endif + + hwif->noprobe = 0; + hwif->drives[0].unmask = 1; + hwif->drives[1].unmask = 1; + + /* hold should be on in all cases */ + hwif->hold = 1; + hwif->mmio = 2; + + /* If the user has selected DDMA assisted copies, + then set up a few local I/O function entry points + */ + +#ifdef CONFIG_BLK_DEV_IDE_AU1XXX_PIO_DBDMA + hwif->INSW = auide_insw; + hwif->OUTSW = auide_outsw; #endif - //hwif->noprobe = !hwif->io_ports[IDE_DATA_OFFSET]; - hwif->noprobe = 0; - hwif->drives[0].unmask = 1; - hwif->drives[1].unmask = 1; - - /* hold should be on in all cases */ - hwif->hold = 1; - hwif->mmio = 2; - - /* set up local I/O function entry points */ - hwif->INB = auide_inb; - hwif->INW = auide_inw; - hwif->INL = auide_inl; - hwif->INSW = auide_insw; - hwif->INSL = auide_insl; - hwif->OUTB = auide_outb; - hwif->OUTBSYNC = auide_outbsync; - hwif->OUTW = auide_outw; - hwif->OUTL = auide_outl; - hwif->OUTSW = auide_outsw; - hwif->OUTSL = auide_outsl; - - hwif->tuneproc = &auide_tune_drive; - hwif->speedproc = &auide_tune_chipset; + + hwif->tuneproc = &auide_tune_drive; + hwif->speedproc = &auide_tune_chipset; #ifdef CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA - hwif->ide_dma_off_quietly = &auide_dma_off_quietly; - hwif->ide_dma_timeout = &auide_dma_timeout; - - hwif->ide_dma_check = &auide_dma_check; - hwif->dma_exec_cmd = &auide_dma_exec_cmd; - hwif->dma_start = &auide_dma_start; - hwif->ide_dma_end = &auide_dma_end; - hwif->dma_setup = &auide_dma_setup; - hwif->ide_dma_test_irq = &auide_dma_test_irq; - hwif->ide_dma_host_off = &auide_dma_host_off; - hwif->ide_dma_host_on = &auide_dma_host_on; - hwif->ide_dma_lostirq = &auide_dma_lostirq; - hwif->ide_dma_on = &auide_dma_on; - - hwif->autodma = 1; - hwif->drives[0].autodma = hwif->autodma; - hwif->drives[1].autodma = hwif->autodma; - hwif->atapi_dma = 1; - hwif->drives[0].using_dma = 1; - hwif->drives[1].using_dma = 1; + hwif->ide_dma_off_quietly = &auide_dma_off_quietly; + hwif->ide_dma_timeout = &auide_dma_timeout; + + hwif->ide_dma_check = &auide_dma_check; + hwif->dma_exec_cmd = &auide_dma_exec_cmd; + hwif->dma_start = &auide_dma_start; + hwif->ide_dma_end = &auide_dma_end; + hwif->dma_setup = &auide_dma_setup; + hwif->ide_dma_test_irq = &auide_dma_test_irq; + hwif->ide_dma_host_off = &auide_dma_host_off; + hwif->ide_dma_host_on = &auide_dma_host_on; + hwif->ide_dma_lostirq = &auide_dma_lostirq; + hwif->ide_dma_on = &auide_dma_on; + + hwif->autodma = 1; + hwif->drives[0].autodma = hwif->autodma; + hwif->drives[1].autodma = hwif->autodma; + hwif->atapi_dma = 1; + #else /* !CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA */ - hwif->autodma = 0; - hwif->channel = 0; - hwif->hold = 1; - hwif->select_data = 0; /* no chipset-specific code */ - hwif->config_data = 0; /* no chipset-specific code */ - - hwif->drives[0].autodma = 0; - hwif->drives[0].drive_data = 0; /* no drive data */ - hwif->drives[0].using_dma = 0; - hwif->drives[0].waiting_for_dma = 0; - hwif->drives[0].autotune = 1; /* 1=autotune, 2=noautotune, 0=default */ - /* secondary hdd not supported */ - hwif->drives[1].autodma = 0; - - hwif->drives[1].drive_data = 0; - hwif->drives[1].using_dma = 0; - hwif->drives[1].waiting_for_dma = 0; - hwif->drives[1].autotune = 2; /* 1=autotune, 2=noautotune, 0=default */ -#endif - hwif->drives[0].io_32bit = 0; /* 0=16-bit, 1=32-bit, 2/3=32bit+sync */ - hwif->drives[1].io_32bit = 0; /* 0=16-bit, 1=32-bit, 2/3=32bit+sync */ - - /*Register Driver with PM Framework*/ -#ifdef CONFIG_PM - auide_hwif.pm.lock = SPIN_LOCK_UNLOCKED; - auide_hwif.pm.stopped = 0; - - auide_hwif.pm.dev = new_au1xxx_power_device( "ide", - &au1200ide_pm_callback, - NULL); - if ( auide_hwif.pm.dev == NULL ) - printk(KERN_INFO "Unable to create a power management \ - device entry for the au1200-IDE.\n"); - else - printk(KERN_INFO "Power management device entry for the \ - au1200-IDE loaded.\n"); + hwif->autodma = 0; + hwif->channel = 0; + hwif->hold = 1; + hwif->select_data = 0; /* no chipset-specific code */ + hwif->config_data = 0; /* no chipset-specific code */ + + hwif->drives[0].autodma = 0; + hwif->drives[0].autotune = 1; /* 1=autotune, 2=noautotune, 0=default */ #endif + hwif->drives[0].no_io_32bit = 1; - auide_hwif.hwif = hwif; - hwif->hwif_data = &auide_hwif; + auide_hwif.hwif = hwif; + hwif->hwif_data = &auide_hwif; -#ifdef CONFIG_BLK_DEV_IDE_AU1XXX_PIO_DBDMA - auide_ddma_init(&auide_hwif); - dbdma_init_done = 1; +#ifdef CONFIG_BLK_DEV_IDE_AU1XXX_PIO_DBDMA + auide_ddma_init(&auide_hwif); + dbdma_init_done = 1; #endif probe_hwif_init(hwif); dev_set_drvdata(dev, hwif); - printk(KERN_INFO "Au1xxx IDE(builtin) configured for %s\n", mode ); + printk(KERN_INFO "Au1xxx IDE(builtin) configured for %s\n", mode ); -out: - return ret; + out: + return ret; } static int au_ide_remove(struct device *dev) @@ -1045,7 +780,7 @@ static int au_ide_remove(struct device *dev) struct platform_device *pdev = to_platform_device(dev); struct resource *res; ide_hwif_t *hwif = dev_get_drvdata(dev); - _auide_hwif *ahwif = &auide_hwif; + _auide_hwif *ahwif = &auide_hwif; ide_unregister(hwif - ide_hwifs); @@ -1069,180 +804,11 @@ static int __init au_ide_init(void) return driver_register(&au1200_ide_driver); } -static void __init au_ide_exit(void) +static void __exit au_ide_exit(void) { driver_unregister(&au1200_ide_driver); } -#ifdef CONFIG_PM -int au1200ide_pm_callback( au1xxx_power_dev_t *dev,\ - au1xxx_request_t request, void *data) { - - unsigned int d, err = 0; - unsigned long flags; - - spin_lock_irqsave(auide_hwif.pm.lock, flags); - - switch (request){ - case AU1XXX_PM_SLEEP: - err = au1xxxide_pm_sleep(dev); - break; - case AU1XXX_PM_WAKEUP: - d = *((unsigned int*)data); - if ( d > 0 && d <= 99) { - err = au1xxxide_pm_standby(dev); - } - else { - err = au1xxxide_pm_resume(dev); - } - break; - case AU1XXX_PM_GETSTATUS: - err = au1xxxide_pm_getstatus(dev); - break; - case AU1XXX_PM_ACCESS: - err = au1xxxide_pm_access(dev); - break; - case AU1XXX_PM_IDLE: - err = au1xxxide_pm_idle(dev); - break; - case AU1XXX_PM_CLEANUP: - err = au1xxxide_pm_cleanup(dev); - break; - default: - err = -1; - break; - } - - spin_unlock_irqrestore(auide_hwif.pm.lock, flags); - - return err; -} - -static int au1xxxide_pm_standby( au1xxx_power_dev_t *dev ) { - return 0; -} - -static int au1xxxide_pm_sleep( au1xxx_power_dev_t *dev ) { - - int retval; - ide_hwif_t *hwif = auide_hwif.hwif; - struct request rq; - struct request_pm_state rqpm; - ide_task_t args; - - if(auide_hwif.pm.stopped) - return -1; - - /* - * wait until hard disc is ready - */ - if ( wait_for_ready(&hwif->drives[0], 35000) ) { - printk("Wait for drive sleep timeout!\n"); - retval = -1; - } - - /* - * sequenz to tell the high level ide driver that pm is resuming - */ - memset(&rq, 0, sizeof(rq)); - memset(&rqpm, 0, sizeof(rqpm)); - memset(&args, 0, sizeof(args)); - rq.flags = REQ_PM_SUSPEND; - rq.special = &args; - rq.pm = &rqpm; - rqpm.pm_step = ide_pm_state_start_suspend; - rqpm.pm_state = PMSG_SUSPEND; - - retval = ide_do_drive_cmd(&hwif->drives[0], &rq, ide_wait); - - if (wait_for_ready (&hwif->drives[0], 35000)) { - printk("Wait for drive sleep timeout!\n"); - retval = -1; - } - - /* - * stop dbdma channels - */ - au1xxx_dbdma_reset(auide_hwif.tx_chan); - au1xxx_dbdma_reset(auide_hwif.rx_chan); - - auide_hwif.pm.stopped = 1; - - return retval; -} - -static int au1xxxide_pm_resume( au1xxx_power_dev_t *dev ) { - - int retval; - ide_hwif_t *hwif = auide_hwif.hwif; - struct request rq; - struct request_pm_state rqpm; - ide_task_t args; - - if(!auide_hwif.pm.stopped) - return -1; - - /* - * start dbdma channels - */ - au1xxx_dbdma_start(auide_hwif.tx_chan); - au1xxx_dbdma_start(auide_hwif.rx_chan); - - /* - * wait until hard disc is ready - */ - if (wait_for_ready ( &hwif->drives[0], 35000)) { - printk("Wait for drive wake up timeout!\n"); - retval = -1; - } - - /* - * sequenz to tell the high level ide driver that pm is resuming - */ - memset(&rq, 0, sizeof(rq)); - memset(&rqpm, 0, sizeof(rqpm)); - memset(&args, 0, sizeof(args)); - rq.flags = REQ_PM_RESUME; - rq.special = &args; - rq.pm = &rqpm; - rqpm.pm_step = ide_pm_state_start_resume; - rqpm.pm_state = PMSG_ON; - - retval = ide_do_drive_cmd(&hwif->drives[0], &rq, ide_head_wait); - - /* - * wait for hard disc - */ - if ( wait_for_ready(&hwif->drives[0], 35000) ) { - printk("Wait for drive wake up timeout!\n"); - retval = -1; - } - - auide_hwif.pm.stopped = 0; - - return retval; -} - -static int au1xxxide_pm_getstatus( au1xxx_power_dev_t *dev ) { - return dev->cur_state; -} - -static int au1xxxide_pm_access( au1xxx_power_dev_t *dev ) { - if (dev->cur_state != AWAKE_STATE) - return 0; - else - return -1; -} - -static int au1xxxide_pm_idle( au1xxx_power_dev_t *dev ) { - return 0; -} - -static int au1xxxide_pm_cleanup( au1xxx_power_dev_t *dev ) { - return 0; -} -#endif /* CONFIG_PM */ - MODULE_LICENSE("GPL"); MODULE_DESCRIPTION("AU1200 IDE driver"); diff --git a/include/asm-mips/mach-au1x00/au1xxx_ide.h b/include/asm-mips/mach-au1x00/au1xxx_ide.h index 0c3c127e619e..e867b4ef96d1 100644 --- a/include/asm-mips/mach-au1x00/au1xxx_ide.h +++ b/include/asm-mips/mach-au1x00/au1xxx_ide.h @@ -74,9 +74,6 @@ typedef struct u8 white_list, black_list; struct dbdma_cmd *dma_table_cpu; dma_addr_t dma_table_dma; - struct scatterlist *sg_table; - int sg_nents; - int sg_dma_direction; #endif struct device *dev; int irq; @@ -162,13 +159,9 @@ int __init auide_probe(void); * Multi-Word DMA + DbDMA functions */ #ifdef CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA - - static int in_drive_list(struct hd_driveid *id, - const struct drive_list_entry *drive_table); static int auide_build_sglist(ide_drive_t *drive, struct request *rq); static int auide_build_dmatable(ide_drive_t *drive); static int auide_dma_end(ide_drive_t *drive); - static void auide_dma_start(ide_drive_t *drive ); ide_startstop_t auide_dma_intr (ide_drive_t *drive); static void auide_dma_exec_cmd(ide_drive_t *drive, u8 command); static int auide_dma_setup(ide_drive_t *drive); @@ -183,8 +176,6 @@ int __init auide_probe(void); static void auide_ddma_rx_callback(int irq, void *param, struct pt_regs *regs); static int auide_dma_off_quietly(ide_drive_t *drive); - static int auide_dma_timeout(ide_drive_t *drive); - #endif /* end CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA */ /******************************************************************************* @@ -294,3 +285,11 @@ int __init auide_probe(void); #define SBC_IDE_MDMA2_TPM (0x00<<6) #define SBC_IDE_MDMA2_TA (0x12<<0) +#define SBC_IDE_TIMING(mode) \ + SBC_IDE_##mode##_TWCS | \ + SBC_IDE_##mode##_TCSH | \ + SBC_IDE_##mode##_TCSOFF | \ + SBC_IDE_##mode##_TWP | \ + SBC_IDE_##mode##_TCSW | \ + SBC_IDE_##mode##_TPM | \ + SBC_IDE_##mode##_TA -- cgit v1.2.3-59-g8ed1b From d36fef6f5aa4a6a1f44490455393a5b22137a6cd Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Thu, 15 Dec 2005 02:19:20 +0100 Subject: [PATCH] ide-disk: flush cache after calling del_gendisk() Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-disk.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/ide/ide-disk.c b/drivers/ide/ide-disk.c index f4e3d3527b0e..449522f0540c 100644 --- a/drivers/ide/ide-disk.c +++ b/drivers/ide/ide-disk.c @@ -1034,12 +1034,12 @@ static int ide_disk_remove(struct device *dev) struct ide_disk_obj *idkp = drive->driver_data; struct gendisk *g = idkp->disk; - ide_cacheflush_p(drive); - ide_unregister_subdriver(drive, idkp->driver); del_gendisk(g); + ide_cacheflush_p(drive); + ide_disk_put(idkp); return 0; -- cgit v1.2.3-59-g8ed1b From 0afaa4fc4abc773ce129f41009a50eeecf3aa50c Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Thu, 15 Dec 2005 02:20:49 +0100 Subject: [PATCH] ide-cd: remove write-only cmd field from struct cdrom_info Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-cd.c | 7 ------- drivers/ide/ide-cd.h | 1 - 2 files changed, 8 deletions(-) (limited to 'drivers') diff --git a/drivers/ide/ide-cd.c b/drivers/ide/ide-cd.c index 9455e42abb23..b4d7a3efb90f 100644 --- a/drivers/ide/ide-cd.c +++ b/drivers/ide/ide-cd.c @@ -1292,7 +1292,6 @@ static ide_startstop_t cdrom_start_seek (ide_drive_t *drive, unsigned int block) struct cdrom_info *info = drive->driver_data; info->dma = 0; - info->cmd = 0; info->start_seek = jiffies; return cdrom_start_packet_command(drive, 0, cdrom_start_seek_continuation); } @@ -1344,8 +1343,6 @@ static ide_startstop_t cdrom_start_read (ide_drive_t *drive, unsigned int block) (rq->nr_sectors & (sectors_per_frame - 1))) info->dma = 0; - info->cmd = READ; - /* Start sending the read request to the drive. */ return cdrom_start_packet_command(drive, 32768, cdrom_start_read_continuation); } @@ -1484,7 +1481,6 @@ static ide_startstop_t cdrom_do_packet_command (ide_drive_t *drive) struct cdrom_info *info = drive->driver_data; info->dma = 0; - info->cmd = 0; rq->flags &= ~REQ_FAILED; len = rq->data_len; @@ -1891,7 +1887,6 @@ static ide_startstop_t cdrom_start_write(ide_drive_t *drive, struct request *rq) /* use dma, if possible. we don't need to check more, since we * know that the transfer is always (at least!) frame aligned */ info->dma = drive->using_dma ? 1 : 0; - info->cmd = WRITE; info->devinfo.media_written = 1; @@ -1916,7 +1911,6 @@ static ide_startstop_t cdrom_do_block_pc(ide_drive_t *drive, struct request *rq) rq->flags |= REQ_QUIET; info->dma = 0; - info->cmd = 0; /* * sg request @@ -1925,7 +1919,6 @@ static ide_startstop_t cdrom_do_block_pc(ide_drive_t *drive, struct request *rq) int mask = drive->queue->dma_alignment; unsigned long addr = (unsigned long) page_address(bio_page(rq->bio)); - info->cmd = rq_data_dir(rq); info->dma = drive->using_dma; /* diff --git a/drivers/ide/ide-cd.h b/drivers/ide/ide-cd.h index 7ca3e5afc665..ad1f2ed14a37 100644 --- a/drivers/ide/ide-cd.h +++ b/drivers/ide/ide-cd.h @@ -480,7 +480,6 @@ struct cdrom_info { struct request request_sense_request; int dma; - int cmd; unsigned long last_block; unsigned long start_seek; /* Buffer to hold mechanism status and changer slot table. */ -- cgit v1.2.3-59-g8ed1b From ea54c96c04cfd9fec881e403d8f7931b47f7b2a6 Mon Sep 17 00:00:00 2001 From: Vojtech Pavlik Date: Wed, 14 Dec 2005 21:47:00 -0500 Subject: [PATCH] Input: ALPS - correctly report button presses on Fujitsu Siemens S6010 Without this patch Forward and Backward buttons on the touchpad do not generate any events. Signed-off-by: Dmitry Torokhov Signed-off-by: Linus Torvalds --- drivers/input/mouse/alps.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/input/mouse/alps.c b/drivers/input/mouse/alps.c index 4acc7fd4cd0f..4f41ec3e4332 100644 --- a/drivers/input/mouse/alps.c +++ b/drivers/input/mouse/alps.c @@ -42,7 +42,7 @@ static struct alps_model_info alps_model_data[] = { { { 0x53, 0x02, 0x14 }, 0xf8, 0xf8, 0 }, { { 0x63, 0x02, 0x0a }, 0xf8, 0xf8, 0 }, { { 0x63, 0x02, 0x14 }, 0xf8, 0xf8, 0 }, - { { 0x63, 0x02, 0x28 }, 0xf8, 0xf8, 0 }, + { { 0x63, 0x02, 0x28 }, 0xf8, 0xf8, ALPS_FW_BK_2 }, /* Fujitsu Siemens S6010 */ { { 0x63, 0x02, 0x3c }, 0x8f, 0x8f, ALPS_WHEEL }, /* Toshiba Satellite S2400-103 */ { { 0x63, 0x02, 0x50 }, 0xef, 0xef, ALPS_FW_BK_1 }, /* NEC Versa L320 */ { { 0x63, 0x02, 0x64 }, 0xf8, 0xf8, 0 }, -- cgit v1.2.3-59-g8ed1b From b7c690b52f424574f7ac8c607e71e9f5c283a557 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Tue, 6 Dec 2005 05:50:56 -0500 Subject: [PATCH] sparc: vfc __iomem annotations and fixes Signed-off-by: Al Viro Signed-off-by: Linus Torvalds --- drivers/sbus/char/vfc.h | 2 +- drivers/sbus/char/vfc_dev.c | 6 +++--- 2 files changed, 4 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/sbus/char/vfc.h b/drivers/sbus/char/vfc.h index a7782e7da42e..8045cd5e7cb3 100644 --- a/drivers/sbus/char/vfc.h +++ b/drivers/sbus/char/vfc.h @@ -125,7 +125,7 @@ struct vfc_regs { struct vfc_dev { - volatile struct vfc_regs *regs; + volatile struct vfc_regs __iomem *regs; struct vfc_regs *phys_regs; unsigned int control_reg; struct semaphore device_lock_sem; diff --git a/drivers/sbus/char/vfc_dev.c b/drivers/sbus/char/vfc_dev.c index 7a103698fa3c..dfdd6be551f3 100644 --- a/drivers/sbus/char/vfc_dev.c +++ b/drivers/sbus/char/vfc_dev.c @@ -149,7 +149,7 @@ int init_vfc_device(struct sbus_dev *sdev,struct vfc_dev *dev, int instance) } printk("Initializing vfc%d\n",instance); dev->regs = NULL; - dev->regs = (volatile struct vfc_regs *) + dev->regs = (volatile struct vfc_regs __iomem *) sbus_ioremap(&sdev->resource[0], 0, sizeof(struct vfc_regs), vfcstr); dev->which_io = sdev->reg_addrs[0].which_io; @@ -319,7 +319,7 @@ int vfc_capture_poll(struct vfc_dev *dev) int timeout = 1000; while (!timeout--) { - if (dev->regs->control & VFC_STATUS_CAPTURE) + if (sbus_readl(&dev->regs->control) & VFC_STATUS_CAPTURE) break; vfc_i2c_delay_no_busy(dev, 100); } @@ -718,7 +718,7 @@ static void deinit_vfc_device(struct vfc_dev *dev) if(dev == NULL) return; devfs_remove("vfc/%d", dev->instance); - sbus_iounmap((unsigned long)dev->regs, sizeof(struct vfc_regs)); + sbus_iounmap(dev->regs, sizeof(struct vfc_regs)); kfree(dev); } -- cgit v1.2.3-59-g8ed1b From bc05d83bbf20a32eb24624726d1027aa960a573c Mon Sep 17 00:00:00 2001 From: Al Viro Date: Tue, 6 Dec 2005 05:51:43 -0500 Subject: [PATCH] sparc: jsflash __user annotations Signed-off-by: Al Viro Signed-off-by: Linus Torvalds --- drivers/sbus/char/jsflash.c | 19 ++++++++++--------- 1 file changed, 10 insertions(+), 9 deletions(-) (limited to 'drivers') diff --git a/drivers/sbus/char/jsflash.c b/drivers/sbus/char/jsflash.c index c12c5046e2fa..14631ac11bc7 100644 --- a/drivers/sbus/char/jsflash.c +++ b/drivers/sbus/char/jsflash.c @@ -249,11 +249,11 @@ static loff_t jsf_lseek(struct file * file, loff_t offset, int orig) /* * OS SIMM Cannot be read in other size but a 32bits word. */ -static ssize_t jsf_read(struct file * file, char * buf, +static ssize_t jsf_read(struct file * file, char __user * buf, size_t togo, loff_t *ppos) { unsigned long p = *ppos; - char *tmp = buf; + char __user *tmp = buf; union byte4 { char s[4]; @@ -305,7 +305,7 @@ static ssize_t jsf_read(struct file * file, char * buf, return tmp-buf; } -static ssize_t jsf_write(struct file * file, const char * buf, +static ssize_t jsf_write(struct file * file, const char __user * buf, size_t count, loff_t *ppos) { return -ENOSPC; @@ -356,10 +356,10 @@ static int jsf_ioctl_erase(unsigned long arg) * Program a block of flash. * Very simple because we can do it byte by byte anyway. */ -static int jsf_ioctl_program(unsigned long arg) +static int jsf_ioctl_program(void __user *arg) { struct jsflash_program_arg abuf; - char *uptr; + char __user *uptr; unsigned long p; unsigned int togo; union { @@ -367,13 +367,13 @@ static int jsf_ioctl_program(unsigned long arg) char s[4]; } b; - if (copy_from_user(&abuf, (char *)arg, JSFPRGSZ)) + if (copy_from_user(&abuf, arg, JSFPRGSZ)) return -EFAULT; p = abuf.off; togo = abuf.size; if ((togo & 3) || (p & 3)) return -EINVAL; - uptr = (char *) (unsigned long) abuf.data; + uptr = (char __user *) (unsigned long) abuf.data; while (togo != 0) { togo -= 4; if (copy_from_user(&b.s[0], uptr, 4)) @@ -390,19 +390,20 @@ static int jsf_ioctl(struct inode *inode, struct file *f, unsigned int cmd, unsigned long arg) { int error = -ENOTTY; + void __user *argp = (void __user *)arg; if (!capable(CAP_SYS_ADMIN)) return -EPERM; switch (cmd) { case JSFLASH_IDENT: - if (copy_to_user((void *)arg, &jsf0.id, JSFIDSZ)) + if (copy_to_user(argp, &jsf0.id, JSFIDSZ)) return -EFAULT; break; case JSFLASH_ERASE: error = jsf_ioctl_erase(arg); break; case JSFLASH_PROGRAM: - error = jsf_ioctl_program(arg); + error = jsf_ioctl_program(argp); break; } -- cgit v1.2.3-59-g8ed1b From fec607fff973b1d7805c1bbce5834690857e7801 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Tue, 6 Dec 2005 05:54:54 -0500 Subject: [PATCH] sbus/char/uctrl: missing prototypes and NULL noise removal Signed-off-by: Al Viro Signed-off-by: Linus Torvalds --- drivers/sbus/char/uctrl.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/sbus/char/uctrl.c b/drivers/sbus/char/uctrl.c index 858cc683f85c..e2d9a7c85427 100644 --- a/drivers/sbus/char/uctrl.c +++ b/drivers/sbus/char/uctrl.c @@ -309,7 +309,7 @@ static void uctrl_do_txn(struct uctrl_txn *txn) } } -void uctrl_get_event_status() +void uctrl_get_event_status(void) { struct uctrl_driver *driver = &drv; struct uctrl_txn txn; @@ -318,7 +318,7 @@ void uctrl_get_event_status() txn.opcode = READ_EVENT_STATUS; txn.inbits = 0; txn.outbits = 2; - txn.inbuf = 0; + txn.inbuf = NULL; txn.outbuf = outbits; uctrl_do_txn(&txn); @@ -329,7 +329,7 @@ void uctrl_get_event_status() dprintk(("ev is %x\n", driver->status.event_status)); } -void uctrl_get_external_status() +void uctrl_get_external_status(void) { struct uctrl_driver *driver = &drv; struct uctrl_txn txn; @@ -339,7 +339,7 @@ void uctrl_get_external_status() txn.opcode = READ_EXTERNAL_STATUS; txn.inbits = 0; txn.outbits = 2; - txn.inbuf = 0; + txn.inbuf = NULL; txn.outbuf = outbits; uctrl_do_txn(&txn); @@ -414,7 +414,7 @@ static void __exit ts102_uctrl_cleanup(void) if (driver->irq) free_irq(driver->irq, driver); if (driver->regs) - driver->regs = 0; + driver->regs = NULL; } module_init(ts102_uctrl_init); -- cgit v1.2.3-59-g8ed1b From b53cb2a4ab276796ad299597d6e7e2317b514ca8 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Thu, 15 Dec 2005 09:17:19 +0000 Subject: [PATCH] iscsi gfp_t annotations Signed-off-by: Al Viro Signed-off-by: Linus Torvalds --- drivers/scsi/iscsi_tcp.c | 2 +- drivers/scsi/scsi_transport_iscsi.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/iscsi_tcp.c b/drivers/scsi/iscsi_tcp.c index 4fea3e4edaa7..3d8009f55342 100644 --- a/drivers/scsi/iscsi_tcp.c +++ b/drivers/scsi/iscsi_tcp.c @@ -3368,7 +3368,7 @@ iscsi_conn_set_param(iscsi_connh_t connh, enum iscsi_param param, switch(param) { case ISCSI_PARAM_MAX_RECV_DLENGTH: { char *saveptr = conn->data; - int flags = GFP_KERNEL; + gfp_t flags = GFP_KERNEL; if (conn->data_size >= value) { conn->max_recv_dlength = value; diff --git a/drivers/scsi/scsi_transport_iscsi.c b/drivers/scsi/scsi_transport_iscsi.c index 49fd18c1a9c6..e08462d50c97 100644 --- a/drivers/scsi/scsi_transport_iscsi.c +++ b/drivers/scsi/scsi_transport_iscsi.c @@ -249,7 +249,7 @@ static inline struct list_head *skb_to_lh(struct sk_buff *skb) } static void* -mempool_zone_alloc_skb(unsigned int gfp_mask, void *pool_data) +mempool_zone_alloc_skb(gfp_t gfp_mask, void *pool_data) { struct mempool_zone *zone = pool_data; -- cgit v1.2.3-59-g8ed1b From 37eb47ed445f4ca1247f3c7b600c0885c2ca8c31 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Thu, 15 Dec 2005 09:17:29 +0000 Subject: [PATCH] s2io: __iomem annotations for recent changes Signed-off-by: Al Viro Signed-off-by: Linus Torvalds --- drivers/net/s2io.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/net/s2io.c b/drivers/net/s2io.c index e57df8dfe6b4..669dd52c412a 100644 --- a/drivers/net/s2io.c +++ b/drivers/net/s2io.c @@ -3078,7 +3078,7 @@ int s2io_set_swapper(nic_t * sp) static int wait_for_msix_trans(nic_t *nic, int i) { - XENA_dev_config_t *bar0 = (XENA_dev_config_t *) nic->bar0; + XENA_dev_config_t __iomem *bar0 = nic->bar0; u64 val64; int ret = 0, cnt = 0; @@ -3099,7 +3099,7 @@ static int wait_for_msix_trans(nic_t *nic, int i) void restore_xmsi_data(nic_t *nic) { - XENA_dev_config_t *bar0 = (XENA_dev_config_t *) nic->bar0; + XENA_dev_config_t __iomem *bar0 = nic->bar0; u64 val64; int i; @@ -3117,7 +3117,7 @@ void restore_xmsi_data(nic_t *nic) static void store_xmsi_data(nic_t *nic) { - XENA_dev_config_t *bar0 = (XENA_dev_config_t *) nic->bar0; + XENA_dev_config_t __iomem *bar0 = nic->bar0; u64 val64, addr, data; int i; @@ -3140,7 +3140,7 @@ static void store_xmsi_data(nic_t *nic) int s2io_enable_msi(nic_t *nic) { - XENA_dev_config_t *bar0 = (XENA_dev_config_t *) nic->bar0; + XENA_dev_config_t __iomem *bar0 = nic->bar0; u16 msi_ctrl, msg_val; struct config_param *config = &nic->config; struct net_device *dev = nic->dev; @@ -3190,7 +3190,7 @@ int s2io_enable_msi(nic_t *nic) int s2io_enable_msi_x(nic_t *nic) { - XENA_dev_config_t *bar0 = (XENA_dev_config_t *) nic->bar0; + XENA_dev_config_t __iomem *bar0 = nic->bar0; u64 tx_mat, rx_mat; u16 msi_control; /* Temp variable */ int ret, i, j, msix_indx = 1; -- cgit v1.2.3-59-g8ed1b From 53b3de1ea2f81de7050f247cd7fc63863887e8d7 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Thu, 15 Dec 2005 09:17:34 +0000 Subject: [PATCH] auerswald.c: %zd for size_t Signed-off-by: Al Viro Signed-off-by: Linus Torvalds --- drivers/usb/misc/auerswald.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/usb/misc/auerswald.c b/drivers/usb/misc/auerswald.c index 2a28ceeaa66a..b293db3c28c3 100644 --- a/drivers/usb/misc/auerswald.c +++ b/drivers/usb/misc/auerswald.c @@ -1696,7 +1696,7 @@ static ssize_t auerchar_write (struct file *file, const char __user *buf, size_t int ret; wait_queue_t wait; - dbg ("auerchar_write %d bytes", len); + dbg ("auerchar_write %zd bytes", len); /* Error checking */ if (!ccp) -- cgit v1.2.3-59-g8ed1b From 8bcc247617deaf229962e9d663c69e65523519ab Mon Sep 17 00:00:00 2001 From: Al Viro Date: Thu, 15 Dec 2005 09:17:39 +0000 Subject: [PATCH] em28xx: %zd for size_t Signed-off-by: Al Viro Signed-off-by: Linus Torvalds --- drivers/media/video/em28xx/em28xx-core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/media/video/em28xx/em28xx-core.c b/drivers/media/video/em28xx/em28xx-core.c index e8a1c2247567..ec11619f8ea9 100644 --- a/drivers/media/video/em28xx/em28xx-core.c +++ b/drivers/media/video/em28xx/em28xx-core.c @@ -126,7 +126,7 @@ u32 em28xx_request_buffers(struct em28xx *dev, u32 count) const size_t imagesize = PAGE_ALIGN(dev->frame_size); /*needs to be page aligned cause the buffers can be mapped individually! */ void *buff = NULL; u32 i; - em28xx_coredbg("requested %i buffers with size %i", count, imagesize); + em28xx_coredbg("requested %i buffers with size %zd", count, imagesize); if (count > EM28XX_NUM_FRAMES) count = EM28XX_NUM_FRAMES; -- cgit v1.2.3-59-g8ed1b From c4aa02eb3939c5004782454434e4d50de471b53d Mon Sep 17 00:00:00 2001 From: Al Viro Date: Thu, 15 Dec 2005 09:17:55 +0000 Subject: [PATCH] cm4000_cs: __user annotations Signed-off-by: Al Viro Signed-off-by: Linus Torvalds --- drivers/char/pcmcia/cm4000_cs.c | 13 +++++++------ 1 file changed, 7 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/char/pcmcia/cm4000_cs.c b/drivers/char/pcmcia/cm4000_cs.c index ef011ef5dc46..61681c9f3f72 100644 --- a/drivers/char/pcmcia/cm4000_cs.c +++ b/drivers/char/pcmcia/cm4000_cs.c @@ -1444,6 +1444,7 @@ static int cmm_ioctl(struct inode *inode, struct file *filp, unsigned int cmd, dev_link_t *link; int size; int rc; + void __user *argp = (void __user *)arg; #ifdef PCMCIA_DEBUG char *ioctl_names[CM_IOC_MAXNR + 1] = { [_IOC_NR(CM_IOCGSTATUS)] "CM_IOCGSTATUS", @@ -1481,11 +1482,11 @@ static int cmm_ioctl(struct inode *inode, struct file *filp, unsigned int cmd, _IOC_DIR(cmd), _IOC_READ, _IOC_WRITE, size, cmd); if (_IOC_DIR(cmd) & _IOC_READ) { - if (!access_ok(VERIFY_WRITE, (void *)arg, size)) + if (!access_ok(VERIFY_WRITE, argp, size)) return -EFAULT; } if (_IOC_DIR(cmd) & _IOC_WRITE) { - if (!access_ok(VERIFY_READ, (void *)arg, size)) + if (!access_ok(VERIFY_READ, argp, size)) return -EFAULT; } @@ -1506,14 +1507,14 @@ static int cmm_ioctl(struct inode *inode, struct file *filp, unsigned int cmd, status |= CM_NO_READER; if (test_bit(IS_BAD_CARD, &dev->flags)) status |= CM_BAD_CARD; - if (copy_to_user((int *)arg, &status, sizeof(int))) + if (copy_to_user(argp, &status, sizeof(int))) return -EFAULT; } return 0; case CM_IOCGATR: DEBUGP(4, dev, "... in CM_IOCGATR\n"); { - struct atreq *atreq = (struct atreq *) arg; + struct atreq __user *atreq = argp; int tmp; /* allow nonblocking io and being interrupted */ if (wait_event_interruptible @@ -1597,7 +1598,7 @@ static int cmm_ioctl(struct inode *inode, struct file *filp, unsigned int cmd, { struct ptsreq krnptsreq; - if (copy_from_user(&krnptsreq, (struct ptsreq *) arg, + if (copy_from_user(&krnptsreq, argp, sizeof(struct ptsreq))) return -EFAULT; @@ -1641,7 +1642,7 @@ static int cmm_ioctl(struct inode *inode, struct file *filp, unsigned int cmd, int old_pc_debug = 0; old_pc_debug = pc_debug; - if (copy_from_user(&pc_debug, (int *)arg, sizeof(int))) + if (copy_from_user(&pc_debug, argp, sizeof(int))) return -EFAULT; if (old_pc_debug != pc_debug) -- cgit v1.2.3-59-g8ed1b From 5ad9201be7f7d52d712fe3c3e841fdc19216ede1 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Thu, 15 Dec 2005 09:18:00 +0000 Subject: [PATCH] dell_rbu: NULL noise removal Signed-off-by: Al Viro Signed-off-by: Linus Torvalds --- drivers/firmware/dell_rbu.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/firmware/dell_rbu.c b/drivers/firmware/dell_rbu.c index 6d83299e7c9b..dfedb777d8c9 100644 --- a/drivers/firmware/dell_rbu.c +++ b/drivers/firmware/dell_rbu.c @@ -105,8 +105,8 @@ static int create_packet(void *data, size_t length) int ordernum = 0; int retval = 0; unsigned int packet_array_size = 0; - void **invalid_addr_packet_array = 0; - void *packet_data_temp_buf = 0; + void **invalid_addr_packet_array = NULL; + void *packet_data_temp_buf = NULL; unsigned int idx = 0; pr_debug("create_packet: entry \n"); @@ -178,7 +178,7 @@ static int create_packet(void *data, size_t length) packet_data_temp_buf), allocation_floor); invalid_addr_packet_array[idx++] = packet_data_temp_buf; - packet_data_temp_buf = 0; + packet_data_temp_buf = NULL; } } spin_lock(&rbu_data.lock); -- cgit v1.2.3-59-g8ed1b From e896fd9861181140617aa9ff3a54dac25e46351d Mon Sep 17 00:00:00 2001 From: Al Viro Date: Thu, 15 Dec 2005 09:18:05 +0000 Subject: [PATCH] wdrtas.c: fix __user annotations Signed-off-by: Al Viro Signed-off-by: Linus Torvalds --- drivers/char/watchdog/wdrtas.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/char/watchdog/wdrtas.c b/drivers/char/watchdog/wdrtas.c index 619e2ffca33f..dacfe31caccf 100644 --- a/drivers/char/watchdog/wdrtas.c +++ b/drivers/char/watchdog/wdrtas.c @@ -320,7 +320,7 @@ static int wdrtas_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg) { - int __user *argp = (void *)arg; + int __user *argp = (void __user *)arg; int i; static struct watchdog_info wdinfo = { .options = WDRTAS_SUPPORTED_MASK, -- cgit v1.2.3-59-g8ed1b From cd0306656c15f355e0e533cc0f08691bb98ca912 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Thu, 15 Dec 2005 09:18:10 +0000 Subject: [PATCH] cyber2000fb.c __iomem annotations Signed-off-by: Al Viro Signed-off-by: Linus Torvalds --- drivers/video/cyber2000fb.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/video/cyber2000fb.c b/drivers/video/cyber2000fb.c index c589d23e7f91..a9300f930ef2 100644 --- a/drivers/video/cyber2000fb.c +++ b/drivers/video/cyber2000fb.c @@ -1512,7 +1512,7 @@ static int cyberpro_pci_enable_mmio(struct cfb_info *cfb) * I/O cycles storing into a reserved memory space at * physical address 0x3000000 */ - unsigned char *iop; + unsigned char __iomem *iop; iop = ioremap(0x3000000, 0x5000); if (iop == NULL) { @@ -1526,7 +1526,7 @@ static int cyberpro_pci_enable_mmio(struct cfb_info *cfb) writeb(EXT_BIU_MISC, iop + 0x3ce); writeb(EXT_BIU_MISC_LIN_ENABLE, iop + 0x3cf); - iounmap((void *)iop); + iounmap(iop); #else /* * Most other machine types are "normal", so -- cgit v1.2.3-59-g8ed1b From d22043940eb8d660df9a94e8e439ab4d3d16edab Mon Sep 17 00:00:00 2001 From: Al Viro Date: Thu, 15 Dec 2005 09:18:15 +0000 Subject: [PATCH] arcfb __user annotations Signed-off-by: Al Viro Signed-off-by: Linus Torvalds --- drivers/video/arcfb.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/video/arcfb.c b/drivers/video/arcfb.c index 080db812ca48..2784f0a9d693 100644 --- a/drivers/video/arcfb.c +++ b/drivers/video/arcfb.c @@ -441,7 +441,7 @@ static int arcfb_ioctl(struct inode *inode, struct file *file, * the fb. it's inefficient for them to do anything less than 64*8 * writes since we update the lcd in each write() anyway. */ -static ssize_t arcfb_write(struct file *file, const char *buf, size_t count, +static ssize_t arcfb_write(struct file *file, const char __user *buf, size_t count, loff_t *ppos) { /* modded from epson 1355 */ -- cgit v1.2.3-59-g8ed1b From 538bacf8a4802d209f955726b66891b8a921dabf Mon Sep 17 00:00:00 2001 From: Al Viro Date: Thu, 15 Dec 2005 09:18:20 +0000 Subject: [PATCH] __user annotations (booke_wdt.c) Signed-off-by: Al Viro Signed-off-by: Linus Torvalds --- drivers/char/watchdog/booke_wdt.c | 13 +++++++------ 1 file changed, 7 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/char/watchdog/booke_wdt.c b/drivers/char/watchdog/booke_wdt.c index 65830ec71042..c800cce73c1e 100644 --- a/drivers/char/watchdog/booke_wdt.c +++ b/drivers/char/watchdog/booke_wdt.c @@ -72,7 +72,7 @@ static __inline__ void booke_wdt_ping(void) /* * booke_wdt_write: */ -static ssize_t booke_wdt_write (struct file *file, const char *buf, +static ssize_t booke_wdt_write (struct file *file, const char __user *buf, size_t count, loff_t *ppos) { booke_wdt_ping(); @@ -92,14 +92,15 @@ static int booke_wdt_ioctl (struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg) { u32 tmp = 0; + u32 __user *p = (u32 __user *)arg; switch (cmd) { case WDIOC_GETSUPPORT: - if (copy_to_user ((struct watchdog_info *) arg, &ident, + if (copy_to_user ((struct watchdog_info __user *) arg, &ident, sizeof(struct watchdog_info))) return -EFAULT; case WDIOC_GETSTATUS: - return put_user(ident.options, (u32 *) arg); + return put_user(ident.options, p); case WDIOC_GETBOOTSTATUS: /* XXX: something is clearing TSR */ tmp = mfspr(SPRN_TSR) & TSR_WRS(3); @@ -109,14 +110,14 @@ static int booke_wdt_ioctl (struct inode *inode, struct file *file, booke_wdt_ping(); return 0; case WDIOC_SETTIMEOUT: - if (get_user(booke_wdt_period, (u32 *) arg)) + if (get_user(booke_wdt_period, p)) return -EFAULT; mtspr(SPRN_TCR, (mfspr(SPRN_TCR)&~WDTP(0))|WDTP(booke_wdt_period)); return 0; case WDIOC_GETTIMEOUT: - return put_user(booke_wdt_period, (u32 *) arg); + return put_user(booke_wdt_period, p); case WDIOC_SETOPTIONS: - if (get_user(tmp, (u32 *) arg)) + if (get_user(tmp, p)) return -EINVAL; if (tmp == WDIOS_ENABLECARD) { booke_wdt_ping(); -- cgit v1.2.3-59-g8ed1b From 94299171dd269aab0c97f6254cedb381f10e6348 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Thu, 15 Dec 2005 09:18:45 +0000 Subject: [PATCH] dst_ca __user annotations, portability fixes Signed-off-by: Al Viro Signed-off-by: Linus Torvalds --- drivers/media/dvb/bt8xx/dst_ca.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/media/dvb/bt8xx/dst_ca.c b/drivers/media/dvb/bt8xx/dst_ca.c index e6541aff3996..2239651969c8 100644 --- a/drivers/media/dvb/bt8xx/dst_ca.c +++ b/drivers/media/dvb/bt8xx/dst_ca.c @@ -406,7 +406,7 @@ static int ca_send_message(struct dst_state *state, struct ca_msg *p_ca_message, } dprintk(verbose, DST_CA_DEBUG, 1, " "); - if (copy_from_user(p_ca_message, (void *)arg, sizeof (struct ca_msg))) { + if (copy_from_user(p_ca_message, arg, sizeof (struct ca_msg))) { result = -EFAULT; goto free_mem_and_exit; } @@ -579,7 +579,7 @@ static int dst_ca_release(struct inode *inode, struct file *file) return 0; } -static int dst_ca_read(struct file *file, char __user *buffer, size_t length, loff_t *offset) +static ssize_t dst_ca_read(struct file *file, char __user *buffer, size_t length, loff_t *offset) { int bytes_read = 0; @@ -588,7 +588,7 @@ static int dst_ca_read(struct file *file, char __user *buffer, size_t length, lo return bytes_read; } -static int dst_ca_write(struct file *file, const char __user *buffer, size_t length, loff_t *offset) +static ssize_t dst_ca_write(struct file *file, const char __user *buffer, size_t length, loff_t *offset) { dprintk(verbose, DST_CA_DEBUG, 1, " Device write."); -- cgit v1.2.3-59-g8ed1b From 7877327d9c360ac91f22e4c7f98bcb10c0180969 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Thu, 15 Dec 2005 09:18:55 +0000 Subject: [PATCH] drivers/atm/adummy.c NULL noise removal Signed-off-by: Al Viro Signed-off-by: Linus Torvalds --- drivers/atm/adummy.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/atm/adummy.c b/drivers/atm/adummy.c index d15c194be44a..d1387cfe2d30 100644 --- a/drivers/atm/adummy.c +++ b/drivers/atm/adummy.c @@ -123,7 +123,7 @@ static int __init adummy_init(void) } memset(adummy_dev, 0, sizeof(struct adummy_dev)); - atm_dev = atm_dev_register(DEV_LABEL, &adummy_ops, -1, 0); + atm_dev = atm_dev_register(DEV_LABEL, &adummy_ops, -1, NULL); if (!atm_dev) { printk(KERN_ERR DEV_LABEL ": atm_dev_register() failed\n"); err = -ENODEV; -- cgit v1.2.3-59-g8ed1b From 833882b452046d3d5028f6293a0a6d6d3c1eee3c Mon Sep 17 00:00:00 2001 From: Al Viro Date: Thu, 15 Dec 2005 09:19:00 +0000 Subject: [PATCH] mwave: missing __user in ioctl struct declaration Signed-off-by: Al Viro Signed-off-by: Linus Torvalds --- drivers/char/mwave/mwavepub.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/char/mwave/mwavepub.h b/drivers/char/mwave/mwavepub.h index f1f9da7a65c1..60c961ae23b4 100644 --- a/drivers/char/mwave/mwavepub.h +++ b/drivers/char/mwave/mwavepub.h @@ -69,7 +69,7 @@ typedef struct _MW_ABILITIES { typedef struct _MW_READWRITE { unsigned short usDspAddress; /* The dsp address */ unsigned long ulDataLength; /* The size in bytes of the data or user buffer */ - void *pBuf; /* Input:variable sized buffer */ + void __user *pBuf; /* Input:variable sized buffer */ } MW_READWRITE, *pMW_READWRITE; #define IOCTL_MW_RESET _IO(MWAVE_MINOR,1) -- cgit v1.2.3-59-g8ed1b From 81f0a91e8f58a7784afe39cda9ac47e9231412a4 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Thu, 15 Dec 2005 09:19:05 +0000 Subject: [PATCH] drivers/input/misc/wistron_btns.c NULL noise removal Signed-off-by: Al Viro Signed-off-by: Linus Torvalds --- drivers/input/misc/wistron_btns.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/input/misc/wistron_btns.c b/drivers/input/misc/wistron_btns.c index 49d0416a2a9a..bac3085185fe 100644 --- a/drivers/input/misc/wistron_btns.c +++ b/drivers/input/misc/wistron_btns.c @@ -320,7 +320,7 @@ static struct dmi_system_id dmi_ids[] = { }, .driver_data = keymap_acer_aspire_1500 }, - { 0, } + { NULL, } }; static int __init select_keymap(void) -- cgit v1.2.3-59-g8ed1b From 7767e126ca0f32cd0438455fdd9650f909d2eeb3 Mon Sep 17 00:00:00 2001 From: Paolo Galtieri Date: Thu, 15 Dec 2005 12:34:28 -0800 Subject: [PATCH] IPMI oops fix While doing some testing I discovered that if the BIOS on a board does not properly setup the DMI information it leads to a panic in the IPMI code. The panic is due to dereferencing a pointer which is not initialized. The pointer is initialized in port_setup() and/or mem_setup() and used in init_one_smi() and cleanup_one_si(), however if either port_setup() or mem_setup() return ENODEV the pointer does not get initialized. Signed-off-by: Paolo Galtieri Acked-by: Corey Minyard Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/char/ipmi/ipmi_si_intf.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/char/ipmi/ipmi_si_intf.c b/drivers/char/ipmi/ipmi_si_intf.c index 01a1f6badb53..beea450ee4b2 100644 --- a/drivers/char/ipmi/ipmi_si_intf.c +++ b/drivers/char/ipmi/ipmi_si_intf.c @@ -2399,7 +2399,8 @@ static int init_one_smi(int intf_num, struct smi_info **smi) new_smi->handlers->cleanup(new_smi->si_sm); kfree(new_smi->si_sm); } - new_smi->io_cleanup(new_smi); + if (new_smi->io_cleanup) + new_smi->io_cleanup(new_smi); return rv; } @@ -2518,7 +2519,8 @@ static void __exit cleanup_one_si(struct smi_info *to_clean) kfree(to_clean->si_sm); - to_clean->io_cleanup(to_clean); + if (to_clean->io_cleanup) + to_clean->io_cleanup(to_clean); } static __exit void cleanup_ipmi_si(void) -- cgit v1.2.3-59-g8ed1b From 2f40fb72a2121da44c35f2588ee9abce1dffa2a9 Mon Sep 17 00:00:00 2001 From: Adrian Bunk Date: Thu, 15 Dec 2005 12:34:29 -0800 Subject: [PATCH] drivers/base/memory.c: unexport the static (sic) memory_sysdev_class We can't export a static struct to modules. Signed-off-by: Adrian Bunk Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/base/memory.c | 1 - 1 file changed, 1 deletion(-) (limited to 'drivers') diff --git a/drivers/base/memory.c b/drivers/base/memory.c index b7ddd651d664..bc3ca6a656b2 100644 --- a/drivers/base/memory.c +++ b/drivers/base/memory.c @@ -28,7 +28,6 @@ static struct sysdev_class memory_sysdev_class = { set_kset_name(MEMORY_CLASS_NAME), }; -EXPORT_SYMBOL(memory_sysdev_class); static char *memory_hotplug_name(struct kset *kset, struct kobject *kobj) { -- cgit v1.2.3-59-g8ed1b From 281ab031a8c9e5b593142eb4ec59a87faae8676a Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Fri, 16 Dec 2005 16:52:22 +1100 Subject: [PATCH] radeon drm: fix agp aperture map offset This finally fixes the radeon memory mapping bug that was incorrectly fixed by the previous patch. This time, we use the actual vram size as the size to calculate how far to move the AGP aperture from the framebuffer in card's memory space. If there are still issues with this patch, they are due to bugs in the X driver that I'm working on fixing too. Signed-off-by: Benjamin Herrenschmidt Cc: Mark M. Hoffman Cc: Paul Mackerras Signed-off-by: Linus Torvalds --- drivers/char/drm/radeon_cp.c | 9 +++++++-- drivers/char/drm/radeon_drv.h | 1 + 2 files changed, 8 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/char/drm/radeon_cp.c b/drivers/char/drm/radeon_cp.c index 9f2b4efd0c7a..95ae9e0892ac 100644 --- a/drivers/char/drm/radeon_cp.c +++ b/drivers/char/drm/radeon_cp.c @@ -1312,6 +1312,8 @@ static void radeon_set_pcigart(drm_radeon_private_t * dev_priv, int on) static int radeon_do_init_cp(drm_device_t * dev, drm_radeon_init_t * init) { drm_radeon_private_t *dev_priv = dev->dev_private;; + unsigned int mem_size; + DRM_DEBUG("\n"); dev_priv->is_pci = init->is_pci; @@ -1521,8 +1523,11 @@ static int radeon_do_init_cp(drm_device_t * dev, drm_radeon_init_t * init) + dev_priv->fb_location) >> 10)); dev_priv->gart_size = init->gart_size; - dev_priv->gart_vm_start = dev_priv->fb_location - + RADEON_READ(RADEON_CONFIG_APER_SIZE) * 2; + + mem_size = RADEON_READ(RADEON_CONFIG_MEMSIZE); + if (mem_size == 0) + mem_size = 0x800000; + dev_priv->gart_vm_start = dev_priv->fb_location + mem_size; #if __OS_HAS_AGP if (!dev_priv->is_pci) diff --git a/drivers/char/drm/radeon_drv.h b/drivers/char/drm/radeon_drv.h index 7bda7e33d2bd..d92ccee3e54c 100644 --- a/drivers/char/drm/radeon_drv.h +++ b/drivers/char/drm/radeon_drv.h @@ -379,6 +379,7 @@ extern int r300_do_cp_cmdbuf(drm_device_t * dev, DRMFILE filp, # define RADEON_PLL_WR_EN (1 << 7) #define RADEON_CLOCK_CNTL_INDEX 0x0008 #define RADEON_CONFIG_APER_SIZE 0x0108 +#define RADEON_CONFIG_MEMSIZE 0x00f8 #define RADEON_CRTC_OFFSET 0x0224 #define RADEON_CRTC_OFFSET_CNTL 0x0228 # define RADEON_CRTC_TILE_EN (1 << 15) -- cgit v1.2.3-59-g8ed1b From dfded4ae71080b53798c7bbf4628a9b22d1e3e8b Mon Sep 17 00:00:00 2001 From: "Mark A. Greer" Date: Fri, 16 Dec 2005 11:08:43 -0800 Subject: [PATCH] i2c: Fix i2c-mv64xxx compilation error The busses/i2c-mv64xxx.c driver doesn't currently compile because of an incorrect argument to dev_err(). This patch fixes that. Signed-off-by: Mark A. Greer Signed-off-by: Jean Delvare Signed-off-by: Greg Kroah-Hartman Signed-off-by: Linus Torvalds --- drivers/i2c/busses/i2c-mv64xxx.c | 11 ++++++----- 1 file changed, 6 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/i2c/busses/i2c-mv64xxx.c b/drivers/i2c/busses/i2c-mv64xxx.c index afd7634e5cc9..81031eb51056 100644 --- a/drivers/i2c/busses/i2c-mv64xxx.c +++ b/drivers/i2c/busses/i2c-mv64xxx.c @@ -529,14 +529,15 @@ mv64xxx_i2c_probe(struct platform_device *pd) i2c_set_adapdata(&drv_data->adapter, drv_data); if (request_irq(drv_data->irq, mv64xxx_i2c_intr, 0, - MV64XXX_I2C_CTLR_NAME, drv_data)) { - - dev_err(dev, "mv64xxx: Can't register intr handler " - "irq: %d\n", drv_data->irq); + MV64XXX_I2C_CTLR_NAME, drv_data)) { + dev_err(&drv_data->adapter.dev, + "mv64xxx: Can't register intr handler irq: %d\n", + drv_data->irq); rc = -EINVAL; goto exit_unmap_regs; } else if ((rc = i2c_add_adapter(&drv_data->adapter)) != 0) { - dev_err(dev, "mv64xxx: Can't add i2c adapter, rc: %d\n", -rc); + dev_err(&drv_data->adapter.dev, + "mv64xxx: Can't add i2c adapter, rc: %d\n", -rc); goto exit_free_irq; } -- cgit v1.2.3-59-g8ed1b From 52f975ea21e28871a371c2d941e13d64c9f8cd66 Mon Sep 17 00:00:00 2001 From: Milton Miller Date: Fri, 16 Dec 2005 11:08:48 -0800 Subject: [PATCH] PCI express must be initialized before PCI hotplug PCI express hotplug uses the pcieportbus driver so pcie must be initialized before hotplug/. This patch changes the link order. Signed-Off-By: Milton Miller Acked-by: Anton Blanchard Signed-off-by: Greg Kroah-Hartman Signed-off-by: Linus Torvalds --- drivers/pci/Makefile | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/pci/Makefile b/drivers/pci/Makefile index 716df015f8d0..6707df968934 100644 --- a/drivers/pci/Makefile +++ b/drivers/pci/Makefile @@ -6,6 +6,9 @@ obj-y += access.o bus.o probe.o remove.o pci.o quirks.o \ pci-driver.o search.o pci-sysfs.o rom.o setup-res.o obj-$(CONFIG_PROC_FS) += proc.o +# Build PCI Express stuff if needed +obj-$(CONFIG_PCIEPORTBUS) += pcie/ + obj-$(CONFIG_HOTPLUG) += hotplug.o # Build the PCI Hotplug drivers if we were asked to @@ -40,7 +43,3 @@ endif ifeq ($(CONFIG_PCI_DEBUG),y) EXTRA_CFLAGS += -DDEBUG endif - -# Build PCI Express stuff if needed -obj-$(CONFIG_PCIEPORTBUS) += pcie/ - -- cgit v1.2.3-59-g8ed1b From 42245e65f356ed54fdf7a1f9a0095e0bc40f73a3 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Fri, 16 Dec 2005 11:09:01 -0800 Subject: [PATCH] UHCI: add missing memory barriers This patch (as617) adds a couple of memory barriers that Ben H. forgot in his recent suspend/resume fix. Signed-off-by: Alan Stern Signed-off-by: Greg Kroah-Hartman Signed-off-by: Linus Torvalds --- drivers/usb/host/uhci-hcd.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers') diff --git a/drivers/usb/host/uhci-hcd.c b/drivers/usb/host/uhci-hcd.c index ed550132db0b..79efaf7d86a3 100644 --- a/drivers/usb/host/uhci-hcd.c +++ b/drivers/usb/host/uhci-hcd.c @@ -717,6 +717,7 @@ static int uhci_suspend(struct usb_hcd *hcd, pm_message_t message) * at the source, so we must turn off PIRQ. */ pci_write_config_word(to_pci_dev(uhci_dev(uhci)), USBLEGSUP, 0); + mb(); clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags); uhci->hc_inaccessible = 1; hcd->poll_rh = 0; @@ -738,6 +739,7 @@ static int uhci_resume(struct usb_hcd *hcd) * really don't want to keep a stale HCD_FLAG_HW_ACCESSIBLE=0 */ set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags); + mb(); if (uhci->rh_state == UHCI_RH_RESET) /* Dead */ return 0; -- cgit v1.2.3-59-g8ed1b From a78719c387cc25ed97304a235a20c24f0f89399b Mon Sep 17 00:00:00 2001 From: Al Viro Date: Fri, 16 Dec 2005 22:35:28 +0000 Subject: [PATCH] ppc: booke_wdt compile fix booke_wdt.c had been missed in cpu_specs[] removal sweep Signed-off-by: Al Viro Signed-off-by: Linus Torvalds --- drivers/char/watchdog/booke_wdt.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/char/watchdog/booke_wdt.c b/drivers/char/watchdog/booke_wdt.c index c800cce73c1e..b6640606b44d 100644 --- a/drivers/char/watchdog/booke_wdt.c +++ b/drivers/char/watchdog/booke_wdt.c @@ -173,7 +173,7 @@ static int __init booke_wdt_init(void) int ret = 0; printk (KERN_INFO "PowerPC Book-E Watchdog Timer Loaded\n"); - ident.firmware_version = cpu_specs[0].pvr_value; + ident.firmware_version = cur_cpu_spec->pvr_value; ret = misc_register(&booke_wdt_miscdev); if (ret) { -- cgit v1.2.3-59-g8ed1b From 87d47d0547631e059c308b392cd2423fe9248c93 Mon Sep 17 00:00:00 2001 From: Ben Collins Date: Sat, 17 Dec 2005 18:39:23 -0800 Subject: [PATCH] i2o: Do not disable pci device when it's in use When dpt_i2o is loaded first, i2o being loaded would cause it to call pci_device_disable, thus breaking dpt_i2o's use of the device. Based on similar usage of pci_disable_device in other drivers. Signed-off-by: Ben Collins Signed-off-by: Linus Torvalds --- drivers/message/i2o/pci.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/message/i2o/pci.c b/drivers/message/i2o/pci.c index 81ef306cb124..ee7075fa1ec3 100644 --- a/drivers/message/i2o/pci.c +++ b/drivers/message/i2o/pci.c @@ -303,6 +303,7 @@ static int __devinit i2o_pci_probe(struct pci_dev *pdev, struct i2o_controller *c; int rc; struct pci_dev *i960 = NULL; + int pci_dev_busy = 0; printk(KERN_INFO "i2o: Checking for PCI I2O controllers...\n"); @@ -395,6 +396,8 @@ static int __devinit i2o_pci_probe(struct pci_dev *pdev, if ((rc = i2o_pci_alloc(c))) { printk(KERN_ERR "%s: DMA / IO allocation for I2O controller " " failed\n", c->name); + if (rc == -ENODEV) + pci_dev_busy = 1; goto free_controller; } @@ -425,7 +428,8 @@ static int __devinit i2o_pci_probe(struct pci_dev *pdev, i2o_iop_free(c); disable: - pci_disable_device(pdev); + if (!pci_dev_busy) + pci_disable_device(pdev); return rc; } -- cgit v1.2.3-59-g8ed1b From e5508c13ac25b07585229b144a45cf64a990171e Mon Sep 17 00:00:00 2001 From: "Salyzyn, Mark" Date: Sat, 17 Dec 2005 19:26:30 -0800 Subject: [PATCH] dpt_i2o fix for deadlock condition Miquel van Smoorenburg forwarded me this fix to resolve a deadlock condition that occurs due to the API change in 2.6.13+ kernels dropping the host locking when entering the error handling. They all end up calling adpt_i2o_post_wait(), which if you call it unlocked, might return with host_lock locked anyway and that causes a deadlock. Signed-off-by: Mark Salyzyn Cc: James Bottomley Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/scsi/dpt_i2o.c | 25 ++++++++++++++++++++----- 1 file changed, 20 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/dpt_i2o.c b/drivers/scsi/dpt_i2o.c index 418fc7b896ac..6252b9ddc01e 100644 --- a/drivers/scsi/dpt_i2o.c +++ b/drivers/scsi/dpt_i2o.c @@ -660,7 +660,12 @@ static int adpt_abort(struct scsi_cmnd * cmd) msg[2] = 0; msg[3]= 0; msg[4] = (u32)cmd; - if( (rcode = adpt_i2o_post_wait(pHba, msg, sizeof(msg), FOREVER)) != 0){ + if (pHba->host) + spin_lock_irq(pHba->host->host_lock); + rcode = adpt_i2o_post_wait(pHba, msg, sizeof(msg), FOREVER); + if (pHba->host) + spin_unlock_irq(pHba->host->host_lock); + if (rcode != 0) { if(rcode == -EOPNOTSUPP ){ printk(KERN_INFO"%s: Abort cmd not supported\n",pHba->name); return FAILED; @@ -697,10 +702,15 @@ static int adpt_device_reset(struct scsi_cmnd* cmd) msg[2] = 0; msg[3] = 0; + if (pHba->host) + spin_lock_irq(pHba->host->host_lock); old_state = d->state; d->state |= DPTI_DEV_RESET; - if( (rcode = adpt_i2o_post_wait(pHba, msg,sizeof(msg), FOREVER)) ){ - d->state = old_state; + rcode = adpt_i2o_post_wait(pHba, msg,sizeof(msg), FOREVER); + d->state = old_state; + if (pHba->host) + spin_unlock_irq(pHba->host->host_lock); + if (rcode != 0) { if(rcode == -EOPNOTSUPP ){ printk(KERN_INFO"%s: Device reset not supported\n",pHba->name); return FAILED; @@ -708,7 +718,6 @@ static int adpt_device_reset(struct scsi_cmnd* cmd) printk(KERN_INFO"%s: Device reset failed\n",pHba->name); return FAILED; } else { - d->state = old_state; printk(KERN_INFO"%s: Device reset successful\n",pHba->name); return SUCCESS; } @@ -721,6 +730,7 @@ static int adpt_bus_reset(struct scsi_cmnd* cmd) { adpt_hba* pHba; u32 msg[4]; + u32 rcode; pHba = (adpt_hba*)cmd->device->host->hostdata[0]; memset(msg, 0, sizeof(msg)); @@ -729,7 +739,12 @@ static int adpt_bus_reset(struct scsi_cmnd* cmd) msg[1] = (I2O_HBA_BUS_RESET<<24|HOST_TID<<12|pHba->channel[cmd->device->channel].tid); msg[2] = 0; msg[3] = 0; - if(adpt_i2o_post_wait(pHba, msg,sizeof(msg), FOREVER) ){ + if (pHba->host) + spin_lock_irq(pHba->host->host_lock); + rcode = adpt_i2o_post_wait(pHba, msg,sizeof(msg), FOREVER); + if (pHba->host) + spin_unlock_irq(pHba->host->host_lock); + if (rcode != 0) { printk(KERN_WARNING"%s: Bus reset failed.\n",pHba->name); return FAILED; } else { -- cgit v1.2.3-59-g8ed1b From ff60dde9e46b87757d5e83bd58be0688fca8e816 Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Sat, 17 Dec 2005 11:42:54 -0500 Subject: [PATCH] Input: fix an OOPS in HID driver This patch fixes an OOPS in HID driver when connecting simulation devices generating unknown simulation events. Signed-off-by: Dmitry Torokhov Acked-by: Vojtech Pavlik Signed-off-by: Linus Torvalds --- drivers/usb/input/hid-input.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/usb/input/hid-input.c b/drivers/usb/input/hid-input.c index 9ff25eb520a6..1220a5004a5c 100644 --- a/drivers/usb/input/hid-input.c +++ b/drivers/usb/input/hid-input.c @@ -137,6 +137,7 @@ static void hidinput_configure_usage(struct hid_input *hidinput, struct hid_fiel switch (usage->hid & 0xffff) { case 0xba: map_abs(ABS_RUDDER); break; case 0xbb: map_abs(ABS_THROTTLE); break; + default: goto ignore; } break; -- cgit v1.2.3-59-g8ed1b From ee219e5e7c12b742243a080e2d8d288a48a32e44 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Sat, 17 Dec 2005 23:20:55 +0100 Subject: [PATCH] radeon drm: fix compilation breakage with gcc 2.95.3 Fix a typo which breaks radeon drm compilation with gcc 2.95.3. The offending line was added back in 2.6.11-rc3, but was harmless back then. A recent addition nearby changed it into a compilation breaker: commit 281ab031a8c9e5b593142eb4ec59a87faae8676a. The doubled semi-colon ends up being an empty instruction, and the variable declaration thus ends up being in the middle of "code". Signed-off-by: Jean Delvare Cc: Benjamin Herrenschmidt Cc: Mark M. Hoffman Cc: Paul Mackerras Signed-off-by: Linus Torvalds --- drivers/char/drm/radeon_cp.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/char/drm/radeon_cp.c b/drivers/char/drm/radeon_cp.c index 95ae9e0892ac..501e557cbc86 100644 --- a/drivers/char/drm/radeon_cp.c +++ b/drivers/char/drm/radeon_cp.c @@ -1311,7 +1311,7 @@ static void radeon_set_pcigart(drm_radeon_private_t * dev_priv, int on) static int radeon_do_init_cp(drm_device_t * dev, drm_radeon_init_t * init) { - drm_radeon_private_t *dev_priv = dev->dev_private;; + drm_radeon_private_t *dev_priv = dev->dev_private; unsigned int mem_size; DRM_DEBUG("\n"); -- cgit v1.2.3-59-g8ed1b From 37b1cc3910f7976369fc0ed55068a686e92555e6 Mon Sep 17 00:00:00 2001 From: Kyungmin Park Date: Fri, 16 Dec 2005 11:17:29 +0900 Subject: [PATCH] mtd onenand driver: check correct manufacturer This (and the three subsequent patches) is working well on OMAP H4 with 2.6.15-rc4 kernel and passes the LTP fs test. Signed-off-by: Linus Torvalds --- drivers/mtd/onenand/onenand_base.c | 16 ++++++++++------ include/linux/mtd/onenand.h | 1 - 2 files changed, 10 insertions(+), 7 deletions(-) (limited to 'drivers') diff --git a/drivers/mtd/onenand/onenand_base.c b/drivers/mtd/onenand/onenand_base.c index f67d5d6eb9a6..33d6f5c2e053 100644 --- a/drivers/mtd/onenand/onenand_base.c +++ b/drivers/mtd/onenand/onenand_base.c @@ -1346,7 +1346,6 @@ static void onenand_print_device_info(int device) static const struct onenand_manufacturers onenand_manuf_ids[] = { {ONENAND_MFR_SAMSUNG, "Samsung"}, - {ONENAND_MFR_UNKNOWN, "Unknown"} }; /** @@ -1357,17 +1356,22 @@ static const struct onenand_manufacturers onenand_manuf_ids[] = { */ static int onenand_check_maf(int manuf) { + int size = ARRAY_SIZE(onenand_manuf_ids); + char *name; int i; - for (i = 0; onenand_manuf_ids[i].id; i++) { + for (i = 0; i < size; i++) if (manuf == onenand_manuf_ids[i].id) break; - } - printk(KERN_DEBUG "OneNAND Manufacturer: %s (0x%0x)\n", - onenand_manuf_ids[i].name, manuf); + if (i < size) + name = onenand_manuf_ids[i].name; + else + name = "Unknown"; + + printk(KERN_DEBUG "OneNAND Manufacturer: %s (0x%0x)\n", name, manuf); - return (i != ONENAND_MFR_UNKNOWN); + return (i == size); } /** diff --git a/include/linux/mtd/onenand.h b/include/linux/mtd/onenand.h index f1fd4215686a..53423d3b43bf 100644 --- a/include/linux/mtd/onenand.h +++ b/include/linux/mtd/onenand.h @@ -140,7 +140,6 @@ struct onenand_chip { * OneNAND Flash Manufacturer ID Codes */ #define ONENAND_MFR_SAMSUNG 0xec -#define ONENAND_MFR_UNKNOWN 0x00 /** * struct nand_manufacturers - NAND Flash Manufacturer ID Structure -- cgit v1.2.3-59-g8ed1b From 20ba89a3614bbc5d111fd74375e14c577859b2a3 Mon Sep 17 00:00:00 2001 From: Kyungmin Park Date: Fri, 16 Dec 2005 11:17:29 +0900 Subject: [PATCH] mtd onenand driver: fix unlock problem in DDP --- drivers/mtd/onenand/onenand_base.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/mtd/onenand/onenand_base.c b/drivers/mtd/onenand/onenand_base.c index 33d6f5c2e053..d57afbaaedc4 100644 --- a/drivers/mtd/onenand/onenand_base.c +++ b/drivers/mtd/onenand/onenand_base.c @@ -1296,6 +1296,12 @@ static int onenand_unlock(struct mtd_info *mtd, loff_t ofs, size_t len) /* Block lock scheme */ for (block = start; block < end; block++) { + /* Set block address */ + value = onenand_block_address(this, block); + this->write_word(value, this->base + ONENAND_REG_START_ADDRESS1); + /* Select DataRAM for DDP */ + value = onenand_bufferram_address(this, block); + this->write_word(value, this->base + ONENAND_REG_START_ADDRESS2); /* Set start block address */ this->write_word(block, this->base + ONENAND_REG_START_BLOCK_ADDRESS); /* Write unlock command */ @@ -1309,10 +1315,6 @@ static int onenand_unlock(struct mtd_info *mtd, loff_t ofs, size_t len) & ONENAND_CTRL_ONGO) continue; - /* Set block address for read block status */ - value = onenand_block_address(this, block); - this->write_word(value, this->base + ONENAND_REG_START_ADDRESS1); - /* Check lock status */ status = this->read_word(this->base + ONENAND_REG_WP_STATUS); if (!(status & ONENAND_WP_US)) -- cgit v1.2.3-59-g8ed1b From 532a37cf8d05dd1aa5631be836036204b0d2b4a1 Mon Sep 17 00:00:00 2001 From: Kyungmin Park Date: Fri, 16 Dec 2005 11:17:29 +0900 Subject: [PATCH] mtd onenand driver: reduce stack usage Signed-off-by: Linus Torvalds --- drivers/mtd/onenand/onenand_base.c | 27 ++++++++++++++++++++++++--- drivers/mtd/onenand/onenand_bbt.c | 4 ++-- include/linux/mtd/onenand.h | 4 ++-- 3 files changed, 28 insertions(+), 7 deletions(-) (limited to 'drivers') diff --git a/drivers/mtd/onenand/onenand_base.c b/drivers/mtd/onenand/onenand_base.c index d57afbaaedc4..a53a73fc2a5a 100644 --- a/drivers/mtd/onenand/onenand_base.c +++ b/drivers/mtd/onenand/onenand_base.c @@ -940,7 +940,7 @@ static int onenand_writev_ecc(struct mtd_info *mtd, const struct kvec *vecs, u_char *eccbuf, struct nand_oobinfo *oobsel) { struct onenand_chip *this = mtd->priv; - unsigned char buffer[MAX_ONENAND_PAGESIZE], *pbuf; + unsigned char *pbuf; size_t total_len, len; int i, written = 0; int ret = 0; @@ -975,7 +975,7 @@ static int onenand_writev_ecc(struct mtd_info *mtd, const struct kvec *vecs, /* Loop until all keve's data has been written */ len = 0; while (count) { - pbuf = buffer; + pbuf = this->page_buf; /* * If the given tuple is >= pagesize then * write it out from the iov @@ -995,7 +995,7 @@ static int onenand_writev_ecc(struct mtd_info *mtd, const struct kvec *vecs, int cnt = 0, thislen; while (cnt < mtd->oobblock) { thislen = min_t(int, mtd->oobblock - cnt, vecs->iov_len - len); - memcpy(buffer + cnt, vecs->iov_base + len, thislen); + memcpy(this->page_buf + cnt, vecs->iov_base + len, thislen); cnt += thislen; len += thislen; @@ -1519,6 +1519,18 @@ int onenand_scan(struct mtd_info *mtd, int maxchips) this->read_bufferram = onenand_sync_read_bufferram; } + /* Allocate buffers, if necessary */ + if (!this->page_buf) { + size_t len; + len = mtd->oobblock + mtd->oobsize; + this->page_buf = kmalloc(len, GFP_KERNEL); + if (!this->page_buf) { + printk(KERN_ERR "onenand_scan(): Can't allocate page_buf\n"); + return -ENOMEM; + } + this->options |= ONENAND_PAGEBUF_ALLOC; + } + this->state = FL_READY; init_waitqueue_head(&this->wq); spin_lock_init(&this->chip_lock); @@ -1580,12 +1592,21 @@ int onenand_scan(struct mtd_info *mtd, int maxchips) */ void onenand_release(struct mtd_info *mtd) { + struct onenand_chip *this = mtd->priv; + #ifdef CONFIG_MTD_PARTITIONS /* Deregister partitions */ del_mtd_partitions (mtd); #endif /* Deregister the device */ del_mtd_device (mtd); + + /* Free bad block table memory, if allocated */ + if (this->bbm) + kfree(this->bbm); + /* Buffer allocated by onenand_scan */ + if (this->options & ONENAND_PAGEBUF_ALLOC) + kfree(this->page_buf); } EXPORT_SYMBOL_GPL(onenand_scan); diff --git a/drivers/mtd/onenand/onenand_bbt.c b/drivers/mtd/onenand/onenand_bbt.c index f40190f499e1..4510d3361eaa 100644 --- a/drivers/mtd/onenand/onenand_bbt.c +++ b/drivers/mtd/onenand/onenand_bbt.c @@ -118,10 +118,10 @@ static int create_bbt(struct mtd_info *mtd, uint8_t *buf, struct nand_bbt_descr */ static inline int onenand_memory_bbt (struct mtd_info *mtd, struct nand_bbt_descr *bd) { - unsigned char data_buf[MAX_ONENAND_PAGESIZE]; + struct onenand_chip *this = mtd->priv; bd->options &= ~NAND_BBT_SCANEMPTY; - return create_bbt(mtd, data_buf, bd, -1); + return create_bbt(mtd, this->page_buf, bd, -1); } /** diff --git a/include/linux/mtd/onenand.h b/include/linux/mtd/onenand.h index 53423d3b43bf..7419b5fab133 100644 --- a/include/linux/mtd/onenand.h +++ b/include/linux/mtd/onenand.h @@ -17,7 +17,6 @@ #include #define MAX_BUFFERRAM 2 -#define MAX_ONENAND_PAGESIZE (2048 + 64) /* Scan and identify a OneNAND device */ extern int onenand_scan(struct mtd_info *mtd, int max_chips); @@ -110,6 +109,7 @@ struct onenand_chip { spinlock_t chip_lock; wait_queue_head_t wq; onenand_state_t state; + unsigned char *page_buf; struct nand_oobinfo *autooob; @@ -134,7 +134,7 @@ struct onenand_chip { * Options bits */ #define ONENAND_CONT_LOCK (0x0001) - +#define ONENAND_PAGEBUF_ALLOC (0x1000) /* * OneNAND Flash Manufacturer ID Codes -- cgit v1.2.3-59-g8ed1b From 27f4e0834746196f219e3e030ca71ffd3b176483 Mon Sep 17 00:00:00 2001 From: Kyungmin Park Date: Fri, 16 Dec 2005 11:17:29 +0900 Subject: [PATCH] mtd onenand driver: use platform_device.h instead device.h Signed-off-by: Linus Torvalds --- drivers/mtd/onenand/generic.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/mtd/onenand/generic.c b/drivers/mtd/onenand/generic.c index 48cce431f89f..45c077d0f063 100644 --- a/drivers/mtd/onenand/generic.c +++ b/drivers/mtd/onenand/generic.c @@ -12,9 +12,9 @@ * This is a device driver for the OneNAND flash for generic boards. */ -#include #include #include +#include #include #include #include @@ -39,7 +39,7 @@ static int __devinit generic_onenand_probe(struct device *dev) { struct onenand_info *info; struct platform_device *pdev = to_platform_device(dev); - struct onenand_platform_data *pdata = pdev->dev.platform_data; + struct flash_platform_data *pdata = pdev->dev.platform_data; struct resource *res = pdev->resource; unsigned long size = res->end - res->start + 1; int err; -- cgit v1.2.3-59-g8ed1b